diff options
Diffstat (limited to 'arch/arm')
1221 files changed, 29303 insertions, 19456 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dfb0312f4e73..5098564d5879 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -186,6 +186,9 @@ config GENERIC_ISA_DMA config FIQ bool +config NEED_RET_TO_USER + bool + config ARCH_MTD_XIP bool @@ -322,9 +325,10 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP + select IRQ_DOMAIN help This enables support for systems based on the Atmel AT91RM9200, - AT91SAM9 and AT91CAP9 processors. + AT91SAM9 processors. config ARCH_BCMRING bool "Broadcom BCMRING" @@ -479,6 +483,7 @@ config ARCH_IOP13XX select ARCH_SUPPORTS_MSI select VMSPLIT_1G select NEED_MACH_MEMORY_H + select NEED_RET_TO_USER help Support for Intel's IOP13XX (XScale) family of processors. @@ -486,6 +491,7 @@ config ARCH_IOP32X bool "IOP32x-based" depends on MMU select CPU_XSCALE + select NEED_RET_TO_USER select PLAT_IOP select PCI select ARCH_REQUIRE_GPIOLIB @@ -497,6 +503,7 @@ config ARCH_IOP33X bool "IOP33x-based" depends on MMU select CPU_XSCALE + select NEED_RET_TO_USER select PLAT_IOP select PCI select ARCH_REQUIRE_GPIOLIB @@ -731,7 +738,6 @@ config ARCH_RPC bool "RiscPC" select ARCH_ACORN select FIQ - select TIMER_ACORN select ARCH_MAY_HAVE_PC_FDC select HAVE_PATA_PLATFORM select ISA_DMA_API @@ -754,31 +760,31 @@ config ARCH_SA1100 select ARCH_HAS_CPUFREQ select CPU_FREQ select GENERIC_CLOCKEVENTS - select HAVE_CLK + select CLKDEV_LOOKUP select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB select HAVE_IDE select NEED_MACH_MEMORY_H + select SPARSE_IRQ help Support for StrongARM 11x0 based boards. -config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450" +config ARCH_S3C24XX + bool "Samsung S3C24XX SoCs" select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK select CLKDEV_LOOKUP select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_WATCHDOG if WATCHDOG help - Samsung S3C2410X CPU based systems, such as the Simtec Electronics - BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or - the Samsung SMDK2410 development board (and derivatives). - - Note, the S3C2416 and the S3C2450 are so close that they even share - the same SoC ID code. This means that there is no separate machine - directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. + Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 + and S3C2450 SoCs based systems, such as the Simtec Electronics BAST + (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the + Samsung SMDK2410 development board (and derivatives). config ARCH_S3C64XX bool "Samsung S3C64XX" @@ -901,6 +907,7 @@ config ARCH_U300 config ARCH_U8500 bool "ST-Ericsson U8500 Series" + depends on MMU select CPU_V7 select ARM_AMBA select GENERIC_CLOCKEVENTS @@ -1066,12 +1073,10 @@ source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-spear/Kconfig" -if ARCH_S3C2410 -source "arch/arm/mach-s3c2410/Kconfig" +source "arch/arm/mach-s3c24xx/Kconfig" +if ARCH_S3C24XX source "arch/arm/mach-s3c2412/Kconfig" -source "arch/arm/mach-s3c2416/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" -source "arch/arm/mach-s3c2443/Kconfig" endif if ARCH_S3C64XX @@ -1127,6 +1132,7 @@ config PLAT_VERSATILE config ARM_TIMER_SP804 bool select CLKSRC_MMIO + select HAVE_SCHED_CLOCK source arch/arm/mm/Kconfig @@ -1577,7 +1583,8 @@ config LOCAL_TIMERS config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 350 if ARCH_U8500 + default 355 if ARCH_U8500 + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. @@ -1588,7 +1595,7 @@ source kernel/Kconfig.preempt config HZ int - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 @@ -2114,7 +2121,7 @@ config CPU_FREQ_S3C config CPU_FREQ_S3C24XX bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL + depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL select CPU_FREQ_S3C help This enables the CPUfreq driver for the Samsung S3C24XX family diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e0d236d7ff73..66ca8014ff3e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -81,47 +81,14 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL - config DEBUG_LL_UART_NONE - bool "No low-level debugging UART" - help - Say Y here if your platform doesn't provide a UART option - below. This relies on your platform choosing the right UART - definition internally in order for low-level debugging to - work. - - config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - help - Say Y here if you want the debug print routines to direct - their output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - Note that the system will appear to hang during boot if there - is nothing connected to read from the DCC. - config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" depends on HAVE_AT91_DBGU0 config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263, 9g45 and cap9" + bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 - config DEBUG_FOOTBRIDGE_COM1 - bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the 8250 at PCI COM1. - - config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the serial port in the DC21285 (Footbridge). - config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -136,6 +103,20 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -199,45 +180,49 @@ choice Say Y here if you want kernel low-level debugging support on i.MX50 or i.MX53. - config DEBUG_IMX6Q_UART - bool "i.MX6Q Debug UART" + config DEBUG_IMX6Q_UART4 + bool "i.MX6Q Debug UART4" depends on SOC_IMX6Q help Say Y here if you want kernel low-level debugging support - on i.MX6Q. + on i.MX6Q UART4. - config DEBUG_S3C_UART0 - depends on PLAT_SAMSUNG - bool "Use S3C UART 0 for low-level debug" + config DEBUG_MSM_UART1 + bool "Kernel low-level debugging messages via MSM UART1" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + their output to the first serial port on MSM devices. - config DEBUG_S3C_UART1 - depends on PLAT_SAMSUNG - bool "Use S3C UART 1 for low-level debug" + config DEBUG_MSM_UART2 + bool "Kernel low-level debugging messages via MSM UART2" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. + their output to the second serial port on MSM devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM_UART3 + bool "Kernel low-level debugging messages via MSM UART3" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on MSM devices. - config DEBUG_S3C_UART2 - depends on PLAT_SAMSUNG - bool "Use S3C UART 2 for low-level debug" + config DEBUG_MSM8660_UART + bool "Kernel low-level debugging messages via MSM 8660 UART" + depends on ARCH_MSM8X60 + select MSM_HAS_DEBUG_UART_HS help Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. + their output to the serial port on MSM 8660 devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM8960_UART + bool "Kernel low-level debugging messages via MSM 8960 UART" + depends on ARCH_MSM8960 + select MSM_HAS_DEBUG_UART_HS + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8960 devices. config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" @@ -255,42 +240,57 @@ choice their output to the standard serial port on the RealView PB1176 platform. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + config DEBUG_S3C_UART0 + depends on PLAT_SAMSUNG + bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to UART 0. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART1 + depends on PLAT_SAMSUNG + bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + their output to UART 1. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART2 + depends on PLAT_SAMSUNG + bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + their output to UART 2. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. endchoice diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1683bfb9166f..dcb088e868fe 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -174,12 +174,13 @@ machine-$(CONFIG_ARCH_PRIMA2) := prima2 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443 +machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2440 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_EXYNOS4) := exynos +machine-$(CONFIG_ARCH_EXYNOS5) := exynos machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index c5d60250d43d..5f6045f1766c 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -58,7 +58,7 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_S3C2410) +#elif defined(CONFIG_ARCH_S3C24XX) .macro loadsp, rb, tmp mov \rb, #0x50000000 add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts new file mode 100644 index 000000000000..5eb26d7d9b4e --- /dev/null +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2011 Ilya Yanok, EmCraft Systems + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TeeJet Mt.Ventoux"; + compatible = "teejet,mt_ventoux", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + /* AM35xx doesn't have IVA */ + soc { + iva { + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 07603b8c9503..92f36627e7f8 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -23,6 +23,11 @@ serial4 = &usart3; serial5 = &usart4; serial6 = &usart5; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + tcb0 = &tcb0; + tcb1 = &tcb1; }; cpus { cpu@0 { @@ -47,24 +52,89 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <1>; + #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; interrupt-parent; reg = <0xfffff000 0x200>; }; + ramc0: ramc@ffffea00 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffea00 0x200>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + }; + + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 4>; + }; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 4 18 4 19 4>; + }; + + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffdc000 0x100>; + interrupts = <26 4 27 4 28 4>; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <4 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1>; + interrupts = <1 4>; status = "disabled"; }; usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6>; + interrupts = <6 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -73,7 +143,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7>; + interrupts = <7 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -82,7 +152,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8>; + interrupts = <8 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -91,7 +161,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23>; + interrupts = <23 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -100,7 +170,7 @@ usart4: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24>; + interrupts = <24 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -109,7 +179,7 @@ usart5: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25>; + interrupts = <25 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -118,9 +188,52 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21>; + interrupts = <21 4>; + status = "disabled"; + }; + + usb1: gadget@fffa4000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffa4000 0x4000>; + interrupts = <10 4>; status = "disabled"; }; }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + 0xffffe800 0x200 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + gpios = <&pioC 13 0 + &pioC 14 0 + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00500000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00500000 0x100000>; + interrupts = <20 4>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts new file mode 100644 index 000000000000..ac0dc0031dda --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -0,0 +1,49 @@ +/* + * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x5.dtsi" +/include/ "at91sam9x5cm.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 19 0 + &pioD 20 0 + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fffa005300a4..3d0c32fb218f 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -22,6 +22,13 @@ serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + gpio4 = &pioE; + tcb0 = &tcb0; + tcb1 = &tcb1; }; cpus { cpu@0 { @@ -46,30 +53,115 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <1>; + #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; interrupt-parent; reg = <0xfffff000 0x200>; }; + ramc0: ramc@ffffe400 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe400 0x200 + 0xffffe600 0x200>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfffffd00 0x10>; + }; + + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 4>; + }; + + + shdwc@fffffd10 { + compatible = "atmel,at91sam9rl-shdwc"; + reg = <0xfffffd10 0x10>; + }; + + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + }; + + tcb1: timer@fffd4000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffd4000 0x100>; + interrupts = <18 4>; + }; + dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21>; + interrupts = <21 4>; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <4 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <5 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <5 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1>; + interrupts = <1 4>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7>; + interrupts = <7 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -78,7 +170,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8>; + interrupts = <8 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -87,7 +179,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9>; + interrupts = <9 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -96,7 +188,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10>; + interrupts = <10 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -105,9 +197,52 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25>; + interrupts = <25 4>; status = "disabled"; }; }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + 0xffffe200 0x200 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + gpios = <&pioC 8 0 + &pioC 14 0 + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00700000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00700000 0x100000>; + interrupts = <22 4>; + status = "disabled"; + }; + + usb1: ehci@00800000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00800000 0x100000>; + interrupts = <22 4>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 20 0 /* sda */ + &pioA 21 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <5>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index a387e7704ce1..c4c8ae4123d5 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -14,13 +14,24 @@ compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; chosen { - bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; }; memory@70000000 { reg = <0x70000000 0x4000000>; }; + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + ahb { apb { dbgu: serial@ffffee00 { @@ -36,5 +47,110 @@ status = "okay"; }; }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + boot@0 { + label = "bootstrap/uboot/kernel"; + reg = <0x0 0x400000>; + }; + + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + data@4000000 { + label = "data"; + reg = <0x4000000 0xC000000>; + }; + }; + + usb0: ohci@00700000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 1 0 + &pioD 3 0>; + }; + + usb1: ehci@00800000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + d8 { + label = "d8"; + gpios = <&pioD 30 0>; + linux,default-trigger = "heartbeat"; + }; + + d6 { + label = "d6"; + gpios = <&pioD 0 1>; + linux,default-trigger = "nand-disk"; + }; + + d7 { + label = "d7"; + gpios = <&pioD 31 1>; + linux,default-trigger = "mmc0"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + left_click { + label = "left_click"; + gpios = <&pioB 6 1>; + linux,code = <272>; + gpio-key,wakeup; + }; + + right_click { + label = "right_click"; + gpios = <&pioB 7 1>; + linux,code = <273>; + gpio-key,wakeup; + }; + + left { + label = "Joystick Left"; + gpios = <&pioB 14 1>; + linux,code = <105>; + }; + + right { + label = "Joystick Right"; + gpios = <&pioB 15 1>; + linux,code = <106>; + }; + + up { + label = "Joystick Up"; + gpios = <&pioB 16 1>; + linux,code = <103>; + }; + + down { + label = "Joystick Down"; + gpios = <&pioB 17 1>; + linux,code = <108>; + }; + + enter { + label = "Joystick Press"; + gpios = <&pioB 18 1>; + linux,code = <28>; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi new file mode 100644 index 000000000000..c111001f254e --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -0,0 +1,264 @@ +/* + * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC + * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, + * AT91SAM9X25, AT91SAM9X35 SoC + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91SAM9x5 family SoC"; + compatible = "atmel,at91sam9x5"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory@20000000 { + reg = <0x20000000 0x10000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <2>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + interrupt-parent; + reg = <0xfffff000 0x200>; + }; + + ramc0: ramc@ffffe800 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe800 0x200>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + rstc@fffffe00 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfffffe00 0x10>; + }; + + shdwc@fffffe10 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfffffe10 0x10>; + }; + + pit: timer@fffffe30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffe30 0xf>; + interrupts = <1 4>; + }; + + tcb0: timer@f8008000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8008000 0x100>; + interrupts = <17 4>; + }; + + tcb1: timer@f800c000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf800c000 0x100>; + interrupts = <17 4>; + }; + + dma0: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <20 4>; + }; + + dma1: dma-controller@ffffee00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffee00 0x200>; + interrupts = <21 4>; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 4>; + status = "disabled"; + }; + + usart0: serial@f801c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf801c000 0x200>; + interrupts = <5 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart1: serial@f8020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8020000 0x200>; + interrupts = <6 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart2: serial@f8024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8024000 0x200>; + interrupts = <7 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + macb0: ethernet@f802c000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <24 4>; + status = "disabled"; + }; + + macb1: ethernet@f8030000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf8030000 0x100>; + interrupts = <27 4>; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + gpios = <&pioC 8 0 + &pioC 14 0 + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00600000 0x100000>; + interrupts = <22 4>; + status = "disabled"; + }; + + usb1: ehci@00700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00700000 0x100000>; + interrupts = <22 4>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 30 0 /* sda */ + &pioA 31 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c@1 { + compatible = "i2c-gpio"; + gpios = <&pioC 0 0 /* sda */ + &pioC 1 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c@2 { + compatible = "i2c-gpio"; + gpios = <&pioB 4 0 /* sda */ + &pioB 5 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi new file mode 100644 index 000000000000..67936f83c694 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -0,0 +1,74 @@ +/* + * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + memory@20000000 { + reg = <0x20000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pb18 { + label = "pb18"; + gpios = <&pioB 18 1>; + linux,default-trigger = "heartbeat"; + }; + + pd21 { + label = "pd21"; + gpios = <&pioD 21 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi new file mode 100644 index 000000000000..d73dce645667 --- /dev/null +++ b/arch/arm/boot/dts/db8500.dtsi @@ -0,0 +1,275 @@ +/* + * Copyright 2012 Linaro Ltd + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + soc-u9500 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "stericsson,db8500"; + interrupt-parent = <&intc>; + ranges; + + intc: interrupt-controller@a0411000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + interrupt-parent; + reg = <0xa0411000 0x1000>, + <0xa0410100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xa0412000 0x1000>; + interrupts = <0 13 4>; + cache-unified; + cache-level = <2>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 7 0x4>; + }; + + timer@a0410600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xa0410600 0x20>; + interrupts = <1 13 0x304>; + }; + + rtc@80154000 { + compatible = "stericsson,db8500-rtc"; + reg = <0x80154000 0x1000>; + interrupts = <0 18 0x4>; + }; + + gpio0: gpio@8012e000 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8012e000 0x80>; + interrupts = <0 119 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio1: gpio@8012e080 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8012e080 0x80>; + interrupts = <0 120 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio2: gpio@8000e000 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8000e000 0x80>; + interrupts = <0 121 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio3: gpio@8000e080 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8000e080 0x80>; + interrupts = <0 122 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio4: gpio@8000e100 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8000e100 0x80>; + interrupts = <0 123 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio5: gpio@8000e180 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8000e180 0x80>; + interrupts = <0 124 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio6: gpio@8011e000 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8011e000 0x80>; + interrupts = <0 125 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio7: gpio@8011e080 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8011e080 0x80>; + interrupts = <0 126 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio8: gpio@a03fe000 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0xa03fe000 0x80>; + interrupts = <0 127 0x4>; + supports-sleepmode; + gpio-controller; + }; + + usb@a03e0000 { + compatible = "stericsson,db8500-musb", + "mentor,musb"; + reg = <0xa03e0000 0x10000>; + interrupts = <0 23 0x4>; + }; + + dma-controller@801C0000 { + compatible = "stericsson,db8500-dma40", + "stericsson,dma40"; + reg = <0x801C0000 0x1000 0x40010000 0x800>; + interrupts = <0 25 0x4>; + }; + + prcmu@80157000 { + compatible = "stericsson,db8500-prcmu"; + reg = <0x80157000 0x1000>; + interrupts = <46 47>; + #address-cells = <1>; + #size-cells = <0>; + + ab8500@5 { + compatible = "stericsson,ab8500"; + reg = <5>; /* mailbox 5 is i2c */ + interrupts = <0 40 0x4>; + }; + }; + + i2c@80004000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x80004000 0x1000>; + interrupts = <0 21 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@80122000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x80122000 0x1000>; + interrupts = <0 22 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@80128000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x80128000 0x1000>; + interrupts = <0 55 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@80110000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x80110000 0x1000>; + interrupts = <0 12 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@8012a000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x8012a000 0x1000>; + interrupts = <0 51 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ssp@80002000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <80002000 0x1000>; + interrupts = <0 14 0x4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + // Add one of these for each child device + cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>; + + }; + + uart@80120000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80120000 0x1000>; + interrupts = <0 11 0x4>; + status = "disabled"; + }; + uart@80121000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80121000 0x1000>; + interrupts = <0 19 0x4>; + status = "disabled"; + }; + uart@80007000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80007000 0x1000>; + interrupts = <0 26 0x4>; + status = "disabled"; + }; + + sdi@80126000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80126000 0x1000>; + interrupts = <0 60 0x4>; + status = "disabled"; + }; + sdi@80118000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80118000 0x1000>; + interrupts = <0 50 0x4>; + status = "disabled"; + }; + sdi@80005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80005000 0x1000>; + interrupts = <0 41 0x4>; + status = "disabled"; + }; + sdi@80119000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80119000 0x1000>; + interrupts = <0 59 0x4>; + status = "disabled"; + }; + sdi@80114000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80114000 0x1000>; + interrupts = <0 99 0x4>; + status = "disabled"; + }; + sdi@80008000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80114000 0x1000>; + interrupts = <0 100 0x4>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts new file mode 100644 index 000000000000..399d17b231d2 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -0,0 +1,26 @@ +/* + * SAMSUNG SMDK5250 board device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5250.dtsi" + +/ { + model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; + compatible = "samsung,smdk5250", "samsung,exynos5250"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi new file mode 100644 index 000000000000..dfc433599436 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -0,0 +1,413 @@ +/* + * SAMSUNG EXYNOS5250 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file. + * EXYNOS5250 based board files can include this file and provide + * values for board specfic bindings. + * + * Note: This file does not include device nodes for all the controllers in + * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases, + * additional nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,exynos5250"; + interrupt-parent = <&gic>; + + gic:interrupt-controller@10490000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10490000 0x1000>, <0x10480000 0x100>; + }; + + watchdog { + compatible = "samsung,s3c2410-wdt"; + reg = <0x101D0000 0x100>; + interrupts = <0 42 0>; + }; + + rtc { + compatible = "samsung,s3c6410-rtc"; + reg = <0x101E0000 0x100>; + interrupts = <0 43 0>, <0 44 0>; + }; + + sdhci@12200000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12200000 0x100>; + interrupts = <0 75 0>; + }; + + sdhci@12210000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12210000 0x100>; + interrupts = <0 76 0>; + }; + + sdhci@12220000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12220000 0x100>; + interrupts = <0 77 0>; + }; + + sdhci@12230000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12230000 0x100>; + interrupts = <0 78 0>; + }; + + serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + }; + + serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + }; + + serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + }; + + serial@12C30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C30000 0x100>; + interrupts = <0 54 0>; + }; + + i2c@12C60000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <0 56 0>; + }; + + i2c@12C70000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C70000 0x100>; + interrupts = <0 57 0>; + }; + + i2c@12C80000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C80000 0x100>; + interrupts = <0 58 0>; + }; + + i2c@12C90000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C90000 0x100>; + interrupts = <0 59 0>; + }; + + i2c@12CA0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CA0000 0x100>; + interrupts = <0 60 0>; + }; + + i2c@12CB0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CB0000 0x100>; + interrupts = <0 61 0>; + }; + + i2c@12CC0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CC0000 0x100>; + interrupts = <0 62 0>; + }; + + i2c@12CD0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CD0000 0x100>; + interrupts = <0 63 0>; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + }; + + mdma0: pdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + }; + + mdma1: pdma@11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + }; + }; + + gpio-controllers { + #address-cells = <1>; + #size-cells = <1>; + gpio-controller; + ranges; + + gpa0: gpio-controller@11400000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400000 0x20>; + #gpio-cells = <4>; + }; + + gpa1: gpio-controller@11400020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400020 0x20>; + #gpio-cells = <4>; + }; + + gpa2: gpio-controller@11400040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400040 0x20>; + #gpio-cells = <4>; + }; + + gpb0: gpio-controller@11400060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400060 0x20>; + #gpio-cells = <4>; + }; + + gpb1: gpio-controller@11400080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400080 0x20>; + #gpio-cells = <4>; + }; + + gpb2: gpio-controller@114000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000A0 0x20>; + #gpio-cells = <4>; + }; + + gpb3: gpio-controller@114000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000C0 0x20>; + #gpio-cells = <4>; + }; + + gpc0: gpio-controller@114000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000E0 0x20>; + #gpio-cells = <4>; + }; + + gpc1: gpio-controller@11400100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400100 0x20>; + #gpio-cells = <4>; + }; + + gpc2: gpio-controller@11400120 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400120 0x20>; + #gpio-cells = <4>; + }; + + gpc3: gpio-controller@11400140 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400140 0x20>; + #gpio-cells = <4>; + }; + + gpd0: gpio-controller@11400160 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400160 0x20>; + #gpio-cells = <4>; + }; + + gpd1: gpio-controller@11400180 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400180 0x20>; + #gpio-cells = <4>; + }; + + gpy0: gpio-controller@114001A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001A0 0x20>; + #gpio-cells = <4>; + }; + + gpy1: gpio-controller@114001C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001C0 0x20>; + #gpio-cells = <4>; + }; + + gpy2: gpio-controller@114001E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001E0 0x20>; + #gpio-cells = <4>; + }; + + gpy3: gpio-controller@11400200 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400200 0x20>; + #gpio-cells = <4>; + }; + + gpy4: gpio-controller@11400220 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400220 0x20>; + #gpio-cells = <4>; + }; + + gpy5: gpio-controller@11400240 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400240 0x20>; + #gpio-cells = <4>; + }; + + gpy6: gpio-controller@11400260 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400260 0x20>; + #gpio-cells = <4>; + }; + + gpx0: gpio-controller@11400C00 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400C00 0x20>; + #gpio-cells = <4>; + }; + + gpx1: gpio-controller@11400C20 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400C20 0x20>; + #gpio-cells = <4>; + }; + + gpx2: gpio-controller@11400C40 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400C40 0x20>; + #gpio-cells = <4>; + }; + + gpx3: gpio-controller@11400C60 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400C60 0x20>; + #gpio-cells = <4>; + }; + + gpe0: gpio-controller@13400000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400000 0x20>; + #gpio-cells = <4>; + }; + + gpe1: gpio-controller@13400020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400020 0x20>; + #gpio-cells = <4>; + }; + + gpf0: gpio-controller@13400040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400040 0x20>; + #gpio-cells = <4>; + }; + + gpf1: gpio-controller@13400060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400060 0x20>; + #gpio-cells = <4>; + }; + + gpg0: gpio-controller@13400080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400080 0x20>; + #gpio-cells = <4>; + }; + + gpg1: gpio-controller@134000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x134000A0 0x20>; + #gpio-cells = <4>; + }; + + gpg2: gpio-controller@134000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x134000C0 0x20>; + #gpio-cells = <4>; + }; + + gph0: gpio-controller@134000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x134000E0 0x20>; + #gpio-cells = <4>; + }; + + gph1: gpio-controller@13400100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400100 0x20>; + #gpio-cells = <4>; + }; + + gpv0: gpio-controller@10D10000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10000 0x20>; + #gpio-cells = <4>; + }; + + gpv1: gpio-controller@10D10020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10020 0x20>; + #gpio-cells = <4>; + }; + + gpv2: gpio-controller@10D10040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10040 0x20>; + #gpio-cells = <4>; + }; + + gpv3: gpio-controller@10D10060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10060 0x20>; + #gpio-cells = <4>; + }; + + gpv4: gpio-controller@10D10080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10080 0x20>; + #gpio-cells = <4>; + }; + + gpz: gpio-controller@03860000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x03860000 0x20>; + #gpio-cells = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 305635bd45c0..37c0ff9c8b90 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -72,15 +72,15 @@ ranges; timer@fff10600 { - compatible = "arm,smp-twd"; + compatible = "arm,cortex-a9-twd-timer"; reg = <0xfff10600 0x20>; - interrupts = <1 13 0xf04>; + interrupts = <1 13 0xf01>; }; watchdog@fff10620 { - compatible = "arm,cortex-a9-wdt"; + compatible = "arm,cortex-a9-twd-wdt"; reg = <0xfff10620 0x20>; - interrupts = <1 14 0xf04>; + interrupts = <1 14 0xf01>; }; intc: interrupt-controller@fff11000 { diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts new file mode 100644 index 000000000000..a51a08fc2af9 --- /dev/null +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -0,0 +1,76 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx27.dtsi" + +/ { + model = "Phytec pcm038"; + compatible = "phytec,imx27-pcm038", "fsl,imx27"; + + memory { + reg = <0x0 0x0>; + }; + + soc { + aipi@10000000 { /* aipi */ + + wdog@10002000 { + status = "okay"; + }; + + uart@1000a000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + uart@1000b000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + uart@1000c000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + fec@1002b000 { + status = "okay"; + }; + + i2c@1001d000 { + clock-frequency = <400000>; + status = "okay"; + at24@4c { + compatible = "at,24c32"; + pagesize = <32>; + reg = <0x52>; + }; + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + lm75@4a { + compatible = "national,lm75"; + reg = <0x4a>; + }; + }; + }; + }; + + nor_flash@c0000000 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0xc0000000 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi new file mode 100644 index 000000000000..bc5e7d5ddd54 --- /dev/null +++ b/arch/arm/boot/dts/imx27.dtsi @@ -0,0 +1,217 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + avic: avic-interrupt-controller@e0000000 { + compatible = "fsl,imx27-avic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10040000 0x1000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc26m { + compatible = "fsl,imx-osc26m", "fixed-clock"; + clock-frequency = <26000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&avic>; + ranges; + + aipi@10000000 { /* AIPI1 */ + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10000000 0x10000000>; + ranges; + + wdog@10002000 { + compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; + reg = <0x10002000 0x4000>; + interrupts = <27>; + status = "disabled"; + }; + + uart1: uart@1000a000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + status = "disabled"; + }; + + uart2: uart@1000b000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000b000 0x1000>; + interrupts = <19>; + status = "disabled"; + }; + + uart3: uart@1000c000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000c000 0x1000>; + interrupts = <18>; + status = "disabled"; + }; + + uart4: uart@1000d000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000d000 0x1000>; + interrupts = <17>; + status = "disabled"; + }; + + cspi1: cspi@1000e000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-cspi"; + reg = <0x1000e000 0x1000>; + interrupts = <16>; + status = "disabled"; + }; + + cspi2: cspi@1000f000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-cspi"; + reg = <0x1000f000 0x1000>; + interrupts = <15>; + status = "disabled"; + }; + + i2c1: i2c@10012000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; + reg = <0x10012000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; + + gpio1: gpio@10015000 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015000 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@10015100 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015100 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@10015200 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015200 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@10015300 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015300 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@10015400 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015400 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@10015500 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015500 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + cspi3: cspi@10017000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-cspi"; + reg = <0x10017000 0x1000>; + interrupts = <6>; + status = "disabled"; + }; + + uart5: uart@1001b000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1001b000 0x1000>; + interrupts = <49>; + status = "disabled"; + }; + + uart6: uart@1001c000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1001c000 0x1000>; + interrupts = <48>; + status = "disabled"; + }; + + i2c2: i2c@1001d000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; + reg = <0x1001d000 0x1000>; + interrupts = <1>; + status = "disabled"; + }; + + fec: fec@1002b000 { + compatible = "fsl,imx27-fec"; + reg = <0x1002b000 0x4000>; + interrupts = <50>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 564cb8c19f15..9949e6060dee 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -56,8 +56,95 @@ compatible = "fsl,mc13892"; spi-max-frequency = <6000000>; reg = <0>; - mc13xxx-irq-gpios = <&gpio1 8 0>; - fsl,mc13xxx-uses-regulator; + interrupt-parent = <&gpio1>; + interrupts = <8>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; }; flash: at45db321d@1 { diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index c3977e0478b9..ce1c8238c897 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -36,11 +36,13 @@ usdhc@02198000 { /* uSDHC3 */ cd-gpios = <&gpio6 11 0>; wp-gpios = <&gpio6 14 0>; + vmmc-supply = <®_3p3v>; status = "okay"; }; usdhc@0219c000 { /* uSDHC4 */ fsl,card-wired; + vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -50,6 +52,18 @@ }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 08d920de7286..4663a4e5a285 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -32,18 +32,52 @@ usdhc@02198000 { /* uSDHC3 */ cd-gpios = <&gpio7 0 0>; wp-gpios = <&gpio7 1 0>; + vmmc-supply = <®_3p3v>; status = "okay"; }; usdhc@0219c000 { /* uSDHC4 */ cd-gpios = <&gpio2 6 0>; wp-gpios = <&gpio2 7 0>; + vmmc-supply = <®_3p3v>; status = "okay"; }; uart2: uart@021e8000 { status = "okay"; }; + + i2c@021a0000 { /* I2C1 */ + status = "okay"; + clock-frequency = <100000>; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_2p5v: 2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 263e8f3664b5..4905f51a106f 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -88,9 +88,9 @@ ranges; timer@00a00600 { - compatible = "arm,smp-twd"; - reg = <0x00a00600 0x100>; - interrupts = <1 13 0xf4>; + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x00a00600 0x20>; + interrupts = <1 13 0xf01>; }; L2: l2-cache@00a02000 { diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts new file mode 100644 index 000000000000..a5376b84227f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -0,0 +1,24 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Globalscale Technologies Dreamplug"; + compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi new file mode 100644 index 000000000000..3474ef890945 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -0,0 +1,36 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "mrvl,kirkwood"; + + ocp@f1000000 { + compatible = "simple-bus"; + ranges = <0 0xf1000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <33>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <34>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + rtc@10300 { + compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <53>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 9486be62bcdd..9f72cd4cf308 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -13,15 +13,6 @@ model = "TI OMAP3 BeagleBoard"; compatible = "ti,omap3-beagle", "ti,omap3"; - /* - * Since the initial device tree board file does not create any - * devices (MMC, network...), the only way to boot is to provide a - * ramdisk. - */ - chosen { - bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk"; - }; - memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts new file mode 100644 index 000000000000..2eee16ec59b4 --- /dev/null +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)"; + compatible = "ti,omap3-evm", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 216c3317461d..c6121357c1eb 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -61,34 +61,57 @@ ranges; ti,hwmods = "l3_main"; - intc: interrupt-controller@1 { - compatible = "ti,omap3-intc"; + intc: interrupt-controller@48200000 { + compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x48200000 0x1000>; }; - uart1: serial@0x4806a000 { + uart1: serial@4806a000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; - uart2: serial@0x4806c000 { + uart2: serial@4806c000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; - uart3: serial@0x49020000 { + uart3: serial@49020000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; - uart4: serial@0x49042000 { + uart4: serial@49042000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; + + i2c1: i2c@48070000 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index c7026578ce7d..9755ad5917f8 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -13,15 +13,6 @@ model = "TI OMAP4 PandaBoard"; compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; - /* - * Since the initial device tree board file does not create any - * devices (MMC, network...), the only way to boot is to provide a - * ramdisk. - */ - chosen { - bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug"; - }; - memory { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 066e28c90328..63c6b2b2bf42 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -13,15 +13,6 @@ model = "TI OMAP4 SDP board"; compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; - /* - * Since the initial device tree board file does not create any - * devices (MMC, network...), the only way to boot is to provide a - * ramdisk. - */ - chosen { - bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug"; - }; - memory { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index e8fe75fac7c5..3d35559e77bc 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -99,33 +99,61 @@ gic: interrupt-controller@48241000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <3>; reg = <0x48241000 0x1000>, <0x48240100 0x0100>; }; - uart1: serial@0x4806a000 { + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; - uart2: serial@0x4806c000 { + uart2: serial@4806c000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; - uart3: serial@0x48020000 { + uart3: serial@48020000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; - uart4: serial@0x4806e000 { + uart4: serial@4806e000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; + + i2c1: i2c@48070000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + + i2c4: i2c@48350000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; + }; }; }; diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts new file mode 100644 index 000000000000..e762facb3fa4 --- /dev/null +++ b/arch/arm/boot/dts/pxa168-aspenite.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "pxa168.dtsi" + +/ { + model = "Marvell PXA168 Aspenite Development Board"; + compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; + }; + + memory { + reg = <0x00000000 0x04000000>; + }; + + soc { + apb@d4000000 { + uart1: uart@d4017000 { + status = "okay"; + }; + twsi1: i2c@d4011000 { + status = "okay"; + }; + rtc: rtc@d4010000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi new file mode 100644 index 000000000000..d32d5128f225 --- /dev/null +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + i2c0 = &twsi1; + i2c1 = &twsi2; + }; + + intc: intc-interrupt-controller@d4282000 { + compatible = "mrvl,mmp-intc", "mrvl,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + apb@d4000000 { /* APB */ + compatible = "mrvl,apb-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4000000 0x00200000>; + ranges; + + uart1: uart@d4017000 { + compatible = "mrvl,mmp-uart", "mrvl,pxa-uart"; + reg = <0xd4017000 0x1000>; + interrupts = <27>; + status = "disabled"; + }; + + uart2: uart@d4018000 { + compatible = "mrvl,mmp-uart", "mrvl,pxa-uart"; + reg = <0xd4018000 0x1000>; + interrupts = <28>; + status = "disabled"; + }; + + uart3: uart@d4026000 { + compatible = "mrvl,mmp-uart", "mrvl,pxa-uart"; + reg = <0xd4026000 0x1000>; + interrupts = <29>; + status = "disabled"; + }; + + gpio: gpio@d4019000 { + compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio"; + reg = <0xd4019000 0x1000>; + interrupts = <49>; + interrupt-names = "gpio_mux"; + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi2: i2c@d4025000 { + compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + reg = <0xd4025000 0x1000>; + interrupts = <58>; + status = "disabled"; + }; + + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <5 6>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts new file mode 100644 index 000000000000..359c6d679156 --- /dev/null +++ b/arch/arm/boot/dts/snowball.dts @@ -0,0 +1,139 @@ +/* + * Copyright 2011 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "db8500.dtsi" + +/ { + model = "Calao Systems Snowball platform with device tree"; + compatible = "calaosystems,snowball-a9500"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <2>; + label = "userpb"; + gpios = <&gpio1 0>; + }; + button@2 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <3>; + label = "userpb"; + gpios = <&gpio4 23>; + }; + button@3 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <4>; + label = "userpb"; + gpios = <&gpio4 23>; + }; + button@4 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <5>; + label = "userpb"; + gpios = <&gpio5 1>; + }; + button@5 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <6>; + label = "userpb"; + gpios = <&gpio5 2>; + }; + }; + + leds { + compatible = "gpio-leds"; + used-led { + label = "user_led"; + gpios = <&gpio4 14>; + }; + }; + + soc-u9500 { + + external-bus@50000000 { + compatible = "simple-bus"; + reg = <0x50000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ethernet@50000000 { + compatible = "smsc,9111"; + reg = <0x50000000 0x10000>; + interrupts = <12>; + interrupt-parent = <&gpio4>; + }; + }; + + sdi@80126000 { + status = "enabled"; + cd-gpios = <&gpio6 26>; + }; + + sdi@80114000 { + status = "enabled"; + }; + + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + i2c@80004000 { + tc3589x@42 { + //compatible = "tc3589x"; + reg = <0x42>; + interrupts = <25>; + interrupt-parent = <&gpio6>; + }; + tps61052@33 { + //compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + // compatible = "lp5521"; + reg = <0x33>; + }; + lp5521@0x34 { + // compatible = "lp5521"; + reg = <0x34>; + }; + bh1780@0x29 { + // compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts new file mode 100644 index 000000000000..636292e18c90 --- /dev/null +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -0,0 +1,47 @@ +/* + * Copyright 2012 Stefan Roese <sr@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear600.dtsi" + +/ { + model = "ST SPEAr600 Evaluation Board"; + compatible = "st,spear600-evb", "st,spear600"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0 0x10000000>; + }; + + ahb { + gmac: ethernet@e0800000 { + phy-mode = "gmii"; + status = "okay"; + }; + + apb { + serial@d0000000 { + status = "okay"; + }; + + serial@d0080000 { + status = "okay"; + }; + + i2c@d0200000 { + clock-frequency = <400000>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi new file mode 100644 index 000000000000..ebe0885a2b98 --- /dev/null +++ b/arch/arm/boot/dts/spear600.dtsi @@ -0,0 +1,174 @@ +/* + * Copyright 2012 Stefan Roese <sr@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "st,spear600"; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + vic0: interrupt-controller@f1100000 { + compatible = "arm,pl190-vic"; + interrupt-controller; + reg = <0xf1100000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@f1000000 { + compatible = "arm,pl190-vic"; + interrupt-controller; + reg = <0xf1000000 0x1000>; + #interrupt-cells = <1>; + }; + + gmac: ethernet@e0800000 { + compatible = "st,spear600-gmac"; + reg = <0xe0800000 0x8000>; + interrupt-parent = <&vic1>; + interrupts = <24 23>; + interrupt-names = "macirq", "eth_wake_irq"; + status = "disabled"; + }; + + fsmc: flash@d1800000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd1800000 0x1000 /* FSMC Register */ + 0xd2000000 0x4000>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + smi: flash@fc000000 { + compatible = "st,spear600-smi"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + status = "disabled"; + }; + + ehci@e1800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + status = "disabled"; + }; + + ehci@e2000000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe2000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <29>; + status = "disabled"; + }; + + ohci@e1900000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe1900000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + status = "disabled"; + }; + + ohci@e2100000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe2100000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <28>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + serial@d0000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xd0000000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <24>; + status = "disabled"; + }; + + serial@d0080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xd0080000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <25>; + status = "disabled"; + }; + + /* local/cpu GPIO */ + gpio0: gpio@f0100000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xf0100000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <18>; + }; + + /* basic GPIO */ + gpio1: gpio@fc980000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfc980000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <19>; + }; + + /* appl GPIO */ + gpio2: gpio@d8100000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xd8100000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <4>; + }; + + i2c@d0200000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xd0200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <28>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts index 70c41fc897d7..ac3fb7558459 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra-cardhu.dts @@ -14,6 +14,22 @@ clock-frequency = < 408000000 >; }; + serial@70006040 { + status = "disable"; + }; + + serial@70006200 { + status = "disable"; + }; + + serial@70006300 { + status = "disable"; + }; + + serial@70006400 { + status = "disable"; + }; + i2c@7000c000 { clock-frequency = <100000>; }; @@ -33,4 +49,22 @@ i2c@7000d000 { clock-frequency = <100000>; }; + + sdhci@78000000 { + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + }; + + sdhci@78000200 { + status = "disable"; + }; + + sdhci@78000400 { + status = "disable"; + }; + + sdhci@78000400 { + support-8bit; + }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 80afa1b70b80..6e8447dc0202 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -10,19 +10,25 @@ reg = < 0x00000000 0x40000000 >; }; + pmc@7000f400 { + nvidia,invert-interrupt; + }; + i2c@7000c000 { clock-frequency = <400000>; - codec: wm8903@1a { + wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; - interrupts = < 347 >; + interrupt-parent = <&gpio>; + interrupts = < 187 0x04 >; gpio-controller; #gpio-cells = <2>; - /* 0x8000 = Not configured */ - gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >; + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; }; }; @@ -38,13 +44,32 @@ clock-frequency = <400000>; }; - sound { - compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903"; + i2s@70002a00 { + status = "disable"; + }; - spkr-en-gpios = <&codec 2 0>; - hp-det-gpios = <&gpio 178 0>; - int-mic-en-gpios = <&gpio 184 0>; - ext-mic-en-gpios = <&gpio 185 0>; + sound { + compatible = "nvidia,tegra-audio-wm8903-harmony", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Harmony"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ + nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ }; serial@70006000 { diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 825d2957da0b..6c02abb469d4 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -12,6 +12,13 @@ i2c@7000c000 { clock-frequency = <400000>; + + alc5632: alc5632@1e { + compatible = "realtek,alc5632"; + reg = <0x1e>; + gpio-controller; + #gpio-cells = <2>; + }; }; i2c@7000c400 { @@ -35,6 +42,35 @@ i2c@7000d000 { clock-frequency = <400000>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + i2s@70002a00 { + status = "disable"; + }; + + sound { + compatible = "nvidia,tegra-audio-alc5632-paz00", + "nvidia,tegra-audio-alc5632"; + + nvidia,model = "Compal PAZ00"; + + nvidia,audio-routing = + "Int Spk", "SPKOUT", + "Int Spk", "SPKOUTN", + "Headset Mic", "MICBIAS1", + "MIC1", "Headset Mic", + "Headset Stereophone", "HPR", + "Headset Stereophone", "HPL", + "DMICDAT", "Digital Mic"; + + nvidia,audio-codec = <&alc5632>; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ }; serial@70006000 { @@ -74,4 +110,25 @@ sdhci@c8000600 { support-8bit; }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 79 1>; /* gpio PJ7, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wifi { + label = "wifi-led"; + gpios = <&gpio 24 0>; + linux,default-trigger = "rfkill0"; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index b55a02e34ba7..dbf1c5a171c2 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -13,6 +13,20 @@ i2c@7000c000 { clock-frequency = <400000>; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = < 187 0x04 >; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + }; }; i2c@7000c400 { @@ -32,6 +46,32 @@ }; }; + i2s@70002a00 { + status = "disable"; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-seaboard", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Seaboard"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1R", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ + }; + serial@70006000 { status = "disable"; }; @@ -72,6 +112,7 @@ usb@c5000000 { nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ + dr_mode = "otg"; }; gpio-keys { @@ -93,4 +134,42 @@ gpio-key,wakeup; }; }; + + emc@7000f400 { + emc-table@190000 { + reg = < 190000 >; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 190000 >; + nvidia,emc-registers = < 0x0000000c 0x00000026 + 0x00000009 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000c 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x0000059f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x0000000b 0x000000c8 + 0x00000003 0x00000007 0x00000004 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xa06204ae + 0x007dc010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 >; + }; + + emc-table@380000 { + reg = < 380000 >; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 380000 >; + nvidia,emc-registers = < 0x00000017 0x0000004b + 0x00000012 0x00000006 0x00000004 0x00000005 + 0x00000003 0x0000000c 0x00000006 0x00000006 + 0x00000003 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x00000b5f + 0x00000000 0x00000003 0x00000003 0x00000006 + 0x00000006 0x00000001 0x00000011 0x000000c8 + 0x00000003 0x0000000e 0x00000007 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xe044048b + 0x007d8010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 >; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts index 3b3ee7db99f3..252476867b54 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra-trimslice.dts @@ -26,6 +26,18 @@ status = "disable"; }; + i2s@70002800 { + status = "disable"; + }; + + i2s@70002a00 { + status = "disable"; + }; + + das@70000c00 { + status = "disable"; + }; + serial@70006000 { clock-frequency = < 216000000 >; }; diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts index c7d3b87f29df..2dcff8728e90 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -12,6 +12,20 @@ i2c@7000c000 { clock-frequency = <400000>; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = < 187 0x04 >; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + }; }; i2c@7000c400 { @@ -26,6 +40,34 @@ clock-frequency = <400000>; }; + i2s@70002a00 { + status = "disable"; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-ventana", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Ventana"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ + nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + }; + serial@70006000 { status = "disable"; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 3da7afd45322..108e894a8926 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,11 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + pmc@7000f400 { + compatible = "nvidia,tegra20-pmc"; + reg = <0x7000e400 0x400>; + }; + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -12,6 +17,33 @@ < 0x50040100 0x0100 >; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 56 0x04 + 0 57 0x04>; + }; + + apbdma: dma@6000a000 { + compatible = "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1200>; + interrupts = < 0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 >; + }; + i2c@7000c000 { #address-cells = <1>; #size-cells = <0>; @@ -44,18 +76,18 @@ interrupts = < 0 53 0x04 >; }; - i2s@70002800 { + tegra_i2s1: i2s@70002800 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; interrupts = < 0 13 0x04 >; - dma-channel = < 2 >; + nvidia,dma-request-selector = < &apbdma 2 >; }; - i2s@70002a00 { + tegra_i2s2: i2s@70002a00 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002a00 0x200>; interrupts = < 0 3 0x04 >; - dma-channel = < 1 >; + nvidia,dma-request-selector = < &apbdma 1 >; }; das@70000c00 { @@ -75,6 +107,8 @@ 0 89 0x04 >; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; pinmux: pinmux@70000000 { @@ -120,6 +154,13 @@ interrupts = < 0 91 0x04 >; }; + emc@7000f400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-emc"; + reg = <0x7000f400 0x200>; + }; + sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; @@ -149,6 +190,7 @@ reg = <0xc5000000 0x4000>; interrupts = < 0 20 0x04 >; phy_type = "utmi"; + nvidia,has-legacy-mode; }; usb@c5004000 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index ee7db9892e02..62a7b39f1c9a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,11 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + pmc@7000f400 { + compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; + reg = <0x7000e400 0x400>; + }; + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -12,6 +17,51 @@ < 0x50040100 0x0100 >; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 144 0x04 + 0 145 0x04 + 0 146 0x04 + 0 147 0x04>; + }; + + apbdma: dma@6000a000 { + compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1400>; + interrupts = < 0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 + 0 128 0x04 + 0 129 0x04 + 0 130 0x04 + 0 131 0x04 + 0 132 0x04 + 0 133 0x04 + 0 134 0x04 + 0 135 0x04 + 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04 >; + }; + i2c@7000c000 { #address-cells = <1>; #size-cells = <0>; @@ -55,9 +105,18 @@ gpio: gpio@6000d000 { compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio"; reg = < 0x6000d000 0x1000 >; - interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >; + interrupts = < 0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04 >; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; serial@70006000 { diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi new file mode 100644 index 000000000000..ad3eca17c436 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi @@ -0,0 +1,96 @@ +/* + * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/ { + ahb { + apb { + usart1: serial@fffb4000 { + status = "okay"; + }; + + usart3: serial@fffd0000 { + status = "okay"; + }; + }; + }; + + i2c-gpio@0 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "user_led1"; + gpios = <&pioB 20 1>; + }; + +/* +* led already used by mother board but active as high +* user_led2 { +* label = "user_led2"; +* gpios = <&pioB 21 1>; +* }; +*/ + user_led3 { + label = "user_led3"; + gpios = <&pioB 22 1>; + }; + + user_led4 { + label = "user_led4"; + gpios = <&pioB 23 1>; + }; + + red { + label = "red"; + gpios = <&pioB 24 1>; + }; + + orange { + label = "orange"; + gpios = <&pioB 30 1>; + }; + + green { + label = "green"; + gpios = <&pioB 31 1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb1 { + label = "user_pb1"; + gpios = <&pioB 25 1>; + linux,code = <0x100>; + }; + + user_pb2 { + label = "user_pb2"; + gpios = <&pioB 13 1>; + linux,code = <0x101>; + }; + + user_pb3 { + label = "user_pb3"; + gpios = <&pioA 26 1>; + linux,code = <0x102>; + }; + + user_pb4 { + label = "user_pb4"; + gpios = <&pioC 9 1>; + linux,code = <0x103>; + }; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index f04b535477f5..3b3c4e0fa79f 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -13,13 +13,24 @@ compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; chosen { - bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs"; + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; memory@20000000 { reg = <0x20000000 0x4000000>; }; + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + ahb { apb { dbgu: serial@fffff200 { @@ -30,6 +41,90 @@ phy-mode = "rmii"; status = "okay"; }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xa0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4a0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7ca0000 0x8360000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led { + label = "user_led"; + gpios = <&pioB 21 1>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&pioB 10 1>; + linux,code = <28>; + gpio-key,wakeup; + }; + }; + + i2c@0 { + status = "okay"; + + rv3029c2@56 { + compatible = "rv3029c2"; + reg = <0x56>; }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi new file mode 100644 index 000000000000..16076e2d0934 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -0,0 +1,201 @@ +/* + * ARM Ltd. Versatile Express + * + * Motherboard Express uATX + * V2M-P1 + * + * HBI-0190D + * + * RS1 memory map ("ARM Cortex-A Series memory map" in the board's + * Technical Reference Manual) + * + * WARNING! The hardware described in this file is independent from the + * original variant (vexpress-v2m.dtsi), but there is a strong + * correspondence between the two configurations. + * + * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT + * CHANGES TO vexpress-v2m.dtsi! + */ + +/ { + aliases { + arm,v2m_timer = &v2m_timer01; + }; + + motherboard { + compatible = "simple-bus"; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; + + psram@1,00000000 { + compatible = "arm,vexpress-psram", "mtd-ram"; + reg = <1 0x00000000 0x02000000>; + bank-width = <4>; + }; + + vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; + + ethernet@2,02000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + }; + + usb@2,03000000 { + compatible = "nxp,usb-isp1761"; + reg = <2 0x03000000 0x20000>; + interrupts = <16>; + port1-otg; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + }; + + sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + }; + + /* PCI-E I2C bus */ + v2m_i2c_pcie: i2c@030000 { + compatible = "arm,versatile-i2c"; + reg = <0x030000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + pcie-switch@60 { + compatible = "idt,89hpes32h8"; + reg = <0x60>; + }; + }; + + aaci@040000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + }; + + /* DVI I2C bus */ + v2m_i2c_dvi: i2c@160000 { + compatible = "arm,versatile-i2c"; + reg = <0x160000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + dvi-transmitter@39 { + compatible = "sil,sii9022-tpi", "sil,sii9022"; + reg = <0x39>; + }; + + dvi-transmitter@60 { + compatible = "sil,sii9022-cpi", "sil,sii9022"; + reg = <0x60>; + }; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + }; + + compact-flash@1a0000 { + compatible = "arm,vexpress-cf", "ata-generic"; + reg = <0x1a0000 0x100 + 0x1a0100 0xf00>; + reg-shift = <2>; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupts = <14>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi new file mode 100644 index 000000000000..a6c9c7c82d53 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -0,0 +1,200 @@ +/* + * ARM Ltd. Versatile Express + * + * Motherboard Express uATX + * V2M-P1 + * + * HBI-0190D + * + * Original memory map ("Legacy memory map" in the board's + * Technical Reference Manual) + * + * WARNING! The hardware described in this file is independent from the + * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong + * correspondence between the two configurations. + * + * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT + * CHANGES TO vexpress-v2m-rs1.dtsi! + */ + +/ { + aliases { + arm,v2m_timer = &v2m_timer01; + }; + + motherboard { + compatible = "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <1 0x00000000 0x04000000>; + bank-width = <4>; + }; + + psram@2,00000000 { + compatible = "arm,vexpress-psram", "mtd-ram"; + reg = <2 0x00000000 0x02000000>; + bank-width = <4>; + }; + + vram@3,00000000 { + compatible = "arm,vexpress-vram"; + reg = <3 0x00000000 0x00800000>; + }; + + ethernet@3,02000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <3 0x02000000 0x10000>; + interrupts = <15>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + }; + + usb@3,03000000 { + compatible = "nxp,usb-isp1761"; + reg = <3 0x03000000 0x20000>; + interrupts = <16>; + port1-otg; + }; + + iofpga@7,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 7 0 0x20000>; + + sysreg@00000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x00000 0x1000>; + }; + + sysctl@01000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x01000 0x1000>; + }; + + /* PCI-E I2C bus */ + v2m_i2c_pcie: i2c@02000 { + compatible = "arm,versatile-i2c"; + reg = <0x02000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + pcie-switch@60 { + compatible = "idt,89hpes32h8"; + reg = <0x60>; + }; + }; + + aaci@04000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x04000 0x1000>; + interrupts = <11>; + }; + + mmci@05000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x05000 0x1000>; + interrupts = <9 10>; + }; + + kmi@06000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x06000 0x1000>; + interrupts = <12>; + }; + + kmi@07000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x07000 0x1000>; + interrupts = <13>; + }; + + v2m_serial0: uart@09000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x09000 0x1000>; + interrupts = <5>; + }; + + v2m_serial1: uart@0a000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a000 0x1000>; + interrupts = <6>; + }; + + v2m_serial2: uart@0b000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b000 0x1000>; + interrupts = <7>; + }; + + v2m_serial3: uart@0c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c000 0x1000>; + interrupts = <8>; + }; + + wdt@0f000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f000 0x1000>; + interrupts = <0>; + }; + + v2m_timer01: timer@11000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x11000 0x1000>; + interrupts = <2>; + }; + + v2m_timer23: timer@12000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x12000 0x1000>; + }; + + /* DVI I2C bus */ + v2m_i2c_dvi: i2c@16000 { + compatible = "arm,versatile-i2c"; + reg = <0x16000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + dvi-transmitter@39 { + compatible = "sil,sii9022-tpi", "sil,sii9022"; + reg = <0x39>; + }; + + dvi-transmitter@60 { + compatible = "sil,sii9022-cpi", "sil,sii9022"; + reg = <0x60>; + }; + }; + + rtc@17000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x17000 0x1000>; + interrupts = <4>; + }; + + compact-flash@1a000 { + compatible = "arm,vexpress-cf", "ata-generic"; + reg = <0x1a000 0x100 + 0x1a100 0xf00>; + reg-shift = <2>; + }; + + clcd@1f000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f000 0x1000>; + interrupts = <14>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts new file mode 100644 index 000000000000..941b161ab78c --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -0,0 +1,157 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A15x2 (version with Test Chip 1) + * Cortex-A15 MPCore (V2P-CA15) + * + * HBI-0237A + */ + +/dts-v1/; + +/ { + model = "V2P-CA15"; + arm,hbi = <0x237>; + compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0x2b000000 0x1000>; + interrupts = <0 85 4>; + }; + + memory-controller@2b0a0000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0x2b0a0000 0x1000>; + }; + + wdt@2b060000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x2b060000 0x1000>; + interrupts = <98>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c002000 0x100>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0x7ffd0000 0x1000>; + interrupts = <0 86 4>, + <0 87 4>; + }; + + dma@7ffb0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x7ffb0000 0x1000>; + interrupts = <0 92 4>, + <0 88 4>, + <0 89 4>, + <0 90 4>, + <0 91 4>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 68 4>, + <0 69 4>; + }; + + motherboard { + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts new file mode 100644 index 000000000000..6905e66d4748 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -0,0 +1,162 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A5x2 + * Cortex-A5 MPCore (V2P-CA5s) + * + * HBI-0225B + */ + +/dts-v1/; + +/ { + model = "V2P-CA5s"; + arm,hbi = <0x225>; + compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + hdlcd@2a110000 { + compatible = "arm,hdlcd"; + reg = <0x2a110000 0x1000>; + interrupts = <0 85 4>; + }; + + memory-controller@2a150000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0x2a150000 0x1000>; + }; + + memory-controller@2a190000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0x2a190000 0x1000>; + interrupts = <0 86 4>, + <0 87 4>; + }; + + scu@2c000000 { + compatible = "arm,cortex-a5-scu"; + reg = <0x2c000000 0x58>; + }; + + timer@2c000600 { + compatible = "arm,cortex-a5-twd-timer"; + reg = <0x2c000600 0x38>; + interrupts = <1 2 0x304>, + <1 3 0x304>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,corex-a5-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + L2: cache-controller@2c0f0000 { + compatible = "arm,pl310-cache"; + reg = <0x2c0f0000 0x1000>; + interrupts = <0 84 4>; + cache-level = <2>; + }; + + pmu { + compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 68 4>, + <0 69 4>; + }; + + motherboard { + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts new file mode 100644 index 000000000000..da778693be54 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -0,0 +1,192 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A9x4 + * Cortex-A9 MPCore (V2P-CA9) + * + * HBI-0191B + */ + +/dts-v1/; + +/ { + model = "V2P-CA9"; + arm,hbi = <0x191>; + compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupts = <0 44 4>; + }; + + memory-controller@100e0000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0x100e0000 0x1000>; + }; + + memory-controller@100e1000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0x100e1000 0x1000>; + interrupts = <0 45 4>, + <0 46 4>; + }; + + timer@100e4000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x100e4000 0x1000>; + interrupts = <0 48 4>, + <0 49 4>; + }; + + watchdog@100e5000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x100e5000 0x1000>; + interrupts = <0 51 4>; + }; + + scu@1e000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1e000000 0x58>; + }; + + timer@1e000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1e000600 0x20>; + interrupts = <1 2 0xf04>, + <1 3 0xf04>; + }; + + gic: interrupt-controller@1e001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1e001000 0x1000>, + <0x1e000100 0x100>; + }; + + L2: cache-controller@1e00a000 { + compatible = "arm,pl310-cache"; + reg = <0x1e00a000 0x1000>; + interrupts = <0 43 4>; + cache-level = <2>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <1 1 1>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 60 4>, + <0 61 4>, + <0 62 4>, + <0 63 4>; + }; + + motherboard { + ranges = <0 0 0x40000000 0x04000000>, + <1 0 0x44000000 0x04000000>, + <2 0 0x48000000 0x04000000>, + <3 0 0x4c000000 0x04000000>, + <7 0 0x10000000 0x00020000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m.dtsi" diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 81a933eb0903..3bb1d7589bd9 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -35,9 +35,6 @@ config DMABOUNCE bool select ZONE_DMA -config TIMER_ACORN - bool - config SHARP_LOCOMO bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 6ea9b6f3607a..69feafe7286c 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_PL330) += pl330.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o -obj-$(CONFIG_TIMER_ACORN) += time-acorn.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index fb1f1cfce60c..dcb13494ca0d 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -299,8 +299,8 @@ int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) goto err1; } - pci_add_resource(&sys->resources, &it8152_io); - pci_add_resource(&sys->resources, &it8152_mem); + pci_add_resource_offset(&sys->resources, &it8152_io, sys->io_offset); + pci_add_resource_offset(&sys->resources, &it8152_mem, sys->mem_offset); if (platform_notify || platform_notify_remove) { printk(KERN_ERR "PCI: Can't use platform_notify\n"); diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 61691cdbdcf2..9173d112ea01 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -16,6 +16,7 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/errno.h> @@ -28,9 +29,8 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/mach/irq.h> +#include <asm/mach-types.h> #include <asm/sizes.h> #include <asm/hardware/sa1111.h> @@ -86,8 +86,10 @@ #define IRQ_S1_CD_VALID (52) #define IRQ_S0_BVD1_STSCHG (53) #define IRQ_S1_BVD1_STSCHG (54) +#define SA1111_IRQ_NR (55) -extern void __init sa1110_mb_enable(void); +extern void sa1110_mb_enable(void); +extern void sa1110_mb_disable(void); /* * We keep the following data for the overall SA1111. Note that the @@ -104,6 +106,7 @@ struct sa1111 { int irq_base; /* base for cascaded on-chip IRQs */ spinlock_t lock; void __iomem *base; + struct sa1111_platform_data *pdata; #ifdef CONFIG_PM void *saved_state; #endif @@ -118,6 +121,7 @@ static struct sa1111 *g_sa1111; struct sa1111_dev_info { unsigned long offset; unsigned long skpcr_mask; + bool dma; unsigned int devid; unsigned int irq[6]; }; @@ -126,6 +130,7 @@ static struct sa1111_dev_info sa1111_devices[] = { { .offset = SA1111_USB, .skpcr_mask = SKPCR_UCLKEN, + .dma = true, .devid = SA1111_DEVID_USB, .irq = { IRQ_USBPWR, @@ -139,6 +144,7 @@ static struct sa1111_dev_info sa1111_devices[] = { { .offset = 0x0600, .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN, + .dma = true, .devid = SA1111_DEVID_SAC, .irq = { AUDXMTDMADONEA, @@ -155,7 +161,7 @@ static struct sa1111_dev_info sa1111_devices[] = { { .offset = SA1111_KBD, .skpcr_mask = SKPCR_PTCLKEN, - .devid = SA1111_DEVID_PS2, + .devid = SA1111_DEVID_PS2_KBD, .irq = { IRQ_TPRXINT, IRQ_TPTXINT @@ -164,7 +170,7 @@ static struct sa1111_dev_info sa1111_devices[] = { { .offset = SA1111_MSE, .skpcr_mask = SKPCR_PMCLKEN, - .devid = SA1111_DEVID_PS2, + .devid = SA1111_DEVID_PS2_MSE, .irq = { IRQ_MSRXINT, IRQ_MSTXINT @@ -434,16 +440,28 @@ static struct irq_chip sa1111_high_chip = { .irq_set_wake = sa1111_wake_highirq, }; -static void sa1111_setup_irq(struct sa1111 *sachip) +static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) { void __iomem *irqbase = sachip->base + SA1111_INTC; - unsigned int irq; + unsigned i, irq; + int ret; /* * We're guaranteed that this region hasn't been taken. */ request_mem_region(sachip->phys + SA1111_INTC, 512, "irq"); + ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1); + if (ret <= 0) { + dev_err(sachip->dev, "unable to allocate %u irqs: %d\n", + SA1111_IRQ_NR, ret); + if (ret == 0) + ret = -EINVAL; + return ret; + } + + sachip->irq_base = ret; + /* disable all IRQs */ sa1111_writel(0, irqbase + SA1111_INTEN0); sa1111_writel(0, irqbase + SA1111_INTEN1); @@ -463,14 +481,16 @@ static void sa1111_setup_irq(struct sa1111 *sachip) sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0); sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1); - for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) { + for (i = IRQ_GPAIN0; i <= SSPROR; i++) { + irq = sachip->irq_base + i; irq_set_chip_and_handler(irq, &sa1111_low_chip, handle_edge_irq); irq_set_chip_data(irq, sachip); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) { + for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) { + irq = sachip->irq_base + i; irq_set_chip_and_handler(irq, &sa1111_high_chip, handle_edge_irq); irq_set_chip_data(irq, sachip); @@ -483,6 +503,11 @@ static void sa1111_setup_irq(struct sa1111 *sachip) irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); irq_set_handler_data(sachip->irq, sachip); irq_set_chained_handler(sachip->irq, sa1111_irq_handler); + + dev_info(sachip->dev, "Providing IRQ%u-%u\n", + sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1); + + return 0; } /* @@ -581,41 +606,10 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, } #endif -#ifdef CONFIG_DMABOUNCE -/* - * According to the "Intel StrongARM SA-1111 Microprocessor Companion - * Chip Specification Update" (June 2000), erratum #7, there is a - * significant bug in the SA1111 SDRAM shared memory controller. If - * an access to a region of memory above 1MB relative to the bank base, - * it is important that address bit 10 _NOT_ be asserted. Depending - * on the configuration of the RAM, bit 10 may correspond to one - * of several different (processor-relative) address bits. - * - * This routine only identifies whether or not a given DMA address - * is susceptible to the bug. - * - * This should only get called for sa1111_device types due to the - * way we configure our device dma_masks. - */ -static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) -{ - /* - * Section 4.6 of the "Intel StrongARM SA-1111 Development Module - * User's Guide" mentions that jumpers R51 and R52 control the - * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or - * SDRAM bank 1 on Neponset). The default configuration selects - * Assabet, so any address in bank 1 is necessarily invalid. - */ - return (machine_is_assabet() || machine_is_pfs168()) && - (addr >= 0xc8000000 || (addr + size) >= 0xc8000000); -} -#endif - static void sa1111_dev_release(struct device *_dev) { struct sa1111_dev *dev = SA1111_DEV(_dev); - release_resource(&dev->res); kfree(dev); } @@ -624,67 +618,58 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, struct sa1111_dev_info *info) { struct sa1111_dev *dev; + unsigned i; int ret; dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL); if (!dev) { ret = -ENOMEM; - goto out; + goto err_alloc; } + device_initialize(&dev->dev); dev_set_name(&dev->dev, "%4.4lx", info->offset); dev->devid = info->devid; dev->dev.parent = sachip->dev; dev->dev.bus = &sa1111_bus_type; dev->dev.release = sa1111_dev_release; - dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask; dev->res.start = sachip->phys + info->offset; dev->res.end = dev->res.start + 511; dev->res.name = dev_name(&dev->dev); dev->res.flags = IORESOURCE_MEM; dev->mapbase = sachip->base + info->offset; dev->skpcr_mask = info->skpcr_mask; - memmove(dev->irq, info->irq, sizeof(dev->irq)); - - ret = request_resource(parent, &dev->res); - if (ret) { - printk("SA1111: failed to allocate resource for %s\n", - dev->res.name); - dev_set_name(&dev->dev, NULL); - kfree(dev); - goto out; - } - - ret = device_register(&dev->dev); - if (ret) { - release_resource(&dev->res); - kfree(dev); - goto out; - } + for (i = 0; i < ARRAY_SIZE(info->irq); i++) + dev->irq[i] = sachip->irq_base + info->irq[i]; -#ifdef CONFIG_DMABOUNCE /* - * If the parent device has a DMA mask associated with it, - * propagate it down to the children. + * If the parent device has a DMA mask associated with it, and + * this child supports DMA, propagate it down to the children. */ - if (sachip->dev->dma_mask) { + if (info->dma && sachip->dev->dma_mask) { dev->dma_mask = *sachip->dev->dma_mask; dev->dev.dma_mask = &dev->dma_mask; + dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask; + } - if (dev->dma_mask != 0xffffffffUL) { - ret = dmabounce_register_dev(&dev->dev, 1024, 4096, - sa1111_needs_bounce); - if (ret) { - dev_err(&dev->dev, "SA1111: Failed to register" - " with dmabounce\n"); - device_unregister(&dev->dev); - } - } + ret = request_resource(parent, &dev->res); + if (ret) { + dev_err(sachip->dev, "failed to allocate resource for %s\n", + dev->res.name); + goto err_resource; } -#endif -out: + ret = device_add(&dev->dev); + if (ret) + goto err_add; + return 0; + + err_add: + release_resource(&dev->res); + err_resource: + put_device(&dev->dev); + err_alloc: return ret; } @@ -698,16 +683,21 @@ out: * Returns: * %-ENODEV device not found. * %-EBUSY physical address already marked in-use. + * %-EINVAL no platform data passed * %0 successful. */ static int __devinit __sa1111_probe(struct device *me, struct resource *mem, int irq) { + struct sa1111_platform_data *pd = me->platform_data; struct sa1111 *sachip; unsigned long id; unsigned int has_devs; int i, ret = -ENODEV; + if (!pd) + return -EINVAL; + sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL); if (!sachip) return -ENOMEM; @@ -727,6 +717,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) sachip->dev = me; dev_set_drvdata(sachip->dev, sachip); + sachip->pdata = pd; sachip->phys = mem->start; sachip->irq = irq; @@ -759,6 +750,16 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) */ sa1111_wake(sachip); + /* + * The interrupt controller must be initialised before any + * other device to ensure that the interrupts are available. + */ + if (sachip->irq != NO_IRQ) { + ret = sa1111_setup_irq(sachip, pd->irq_base); + if (ret) + goto err_unmap; + } + #ifdef CONFIG_ARCH_SA1100 { unsigned int val; @@ -789,24 +790,14 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) } #endif - /* - * The interrupt controller must be initialised before any - * other device to ensure that the interrupts are available. - */ - if (sachip->irq != NO_IRQ) - sa1111_setup_irq(sachip); - g_sa1111 = sachip; has_devs = ~0; - if (machine_is_assabet() || machine_is_jornada720() || - machine_is_badge4()) - has_devs &= ~(1 << 4); - else - has_devs &= ~(1 << 1); + if (pd) + has_devs &= ~pd->disable_devs; for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++) - if (has_devs & (1 << i)) + if (sa1111_devices[i].devid & has_devs) sa1111_init_one_child(sachip, mem, &sa1111_devices[i]); return 0; @@ -824,7 +815,10 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) static int sa1111_remove_one(struct device *dev, void *data) { - device_unregister(dev); + struct sa1111_dev *sadev = SA1111_DEV(dev); + device_del(&sadev->dev); + release_resource(&sadev->res); + put_device(&sadev->dev); return 0; } @@ -846,6 +840,7 @@ static void __sa1111_remove(struct sa1111 *sachip) if (sachip->irq != NO_IRQ) { irq_set_chained_handler(sachip->irq, NULL); irq_set_handler_data(sachip->irq, NULL); + irq_free_descs(sachip->irq_base, SA1111_IRQ_NR); release_mem_region(sachip->phys + SA1111_INTC, 512); } @@ -904,6 +899,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) save->skpwm0 = sa1111_readl(base + SA1111_SKPWM0); save->skpwm1 = sa1111_readl(base + SA1111_SKPWM1); + sa1111_writel(0, sachip->base + SA1111_SKPWM0); + sa1111_writel(0, sachip->base + SA1111_SKPWM1); + base = sachip->base + SA1111_INTC; save->intpol0 = sa1111_readl(base + SA1111_INTPOL0); save->intpol1 = sa1111_readl(base + SA1111_INTPOL1); @@ -919,13 +917,15 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) */ val = sa1111_readl(sachip->base + SA1111_SKCR); sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR); - sa1111_writel(0, sachip->base + SA1111_SKPWM0); - sa1111_writel(0, sachip->base + SA1111_SKPWM1); clk_disable(sachip->clk); spin_unlock_irqrestore(&sachip->lock, flags); +#ifdef CONFIG_ARCH_SA1100 + sa1110_mb_disable(); +#endif + return 0; } @@ -966,6 +966,11 @@ static int sa1111_resume(struct platform_device *dev) */ sa1111_wake(sachip); +#ifdef CONFIG_ARCH_SA1100 + /* Enable the memory bus request/grant signals */ + sa1110_mb_enable(); +#endif + /* * Only lock for write ops. Also, sa1111_wake must be called with * released spinlock! @@ -1053,6 +1058,7 @@ static struct platform_driver sa1111_device_driver = { .resume = sa1111_resume, .driver = { .name = "sa1111", + .owner = THIS_MODULE, }, }; @@ -1238,16 +1244,23 @@ EXPORT_SYMBOL(sa1111_set_sleep_io); * sa1111_enable_device - enable an on-chip SA1111 function block * @sadev: SA1111 function block device to enable */ -void sa1111_enable_device(struct sa1111_dev *sadev) +int sa1111_enable_device(struct sa1111_dev *sadev) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned long flags; unsigned int val; + int ret = 0; - spin_lock_irqsave(&sachip->lock, flags); - val = sa1111_readl(sachip->base + SA1111_SKPCR); - sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); - spin_unlock_irqrestore(&sachip->lock, flags); + if (sachip->pdata && sachip->pdata->enable) + ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid); + + if (ret == 0) { + spin_lock_irqsave(&sachip->lock, flags); + val = sa1111_readl(sachip->base + SA1111_SKPCR); + sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); + spin_unlock_irqrestore(&sachip->lock, flags); + } + return ret; } EXPORT_SYMBOL(sa1111_enable_device); @@ -1265,6 +1278,9 @@ void sa1111_disable_device(struct sa1111_dev *sadev) val = sa1111_readl(sachip->base + SA1111_SKPCR); sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); + + if (sachip->pdata && sachip->pdata->disable) + sachip->pdata->disable(sachip->pdata->data, sadev->devid); } EXPORT_SYMBOL(sa1111_disable_device); @@ -1279,7 +1295,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv) struct sa1111_dev *dev = SA1111_DEV(_dev); struct sa1111_driver *drv = SA1111_DRV(_drv); - return dev->devid == drv->devid; + return dev->devid & drv->devid; } static int sa1111_bus_suspend(struct device *dev, pm_message_t state) @@ -1304,6 +1320,14 @@ static int sa1111_bus_resume(struct device *dev) return ret; } +static void sa1111_bus_shutdown(struct device *dev) +{ + struct sa1111_driver *drv = SA1111_DRV(dev->driver); + + if (drv && drv->shutdown) + drv->shutdown(SA1111_DEV(dev)); +} + static int sa1111_bus_probe(struct device *dev) { struct sa1111_dev *sadev = SA1111_DEV(dev); @@ -1333,6 +1357,7 @@ struct bus_type sa1111_bus_type = { .remove = sa1111_bus_remove, .suspend = sa1111_bus_suspend, .resume = sa1111_bus_resume, + .shutdown = sa1111_bus_shutdown, }; EXPORT_SYMBOL(sa1111_bus_type); @@ -1349,9 +1374,70 @@ void sa1111_driver_unregister(struct sa1111_driver *driver) } EXPORT_SYMBOL(sa1111_driver_unregister); +#ifdef CONFIG_DMABOUNCE +/* + * According to the "Intel StrongARM SA-1111 Microprocessor Companion + * Chip Specification Update" (June 2000), erratum #7, there is a + * significant bug in the SA1111 SDRAM shared memory controller. If + * an access to a region of memory above 1MB relative to the bank base, + * it is important that address bit 10 _NOT_ be asserted. Depending + * on the configuration of the RAM, bit 10 may correspond to one + * of several different (processor-relative) address bits. + * + * This routine only identifies whether or not a given DMA address + * is susceptible to the bug. + * + * This should only get called for sa1111_device types due to the + * way we configure our device dma_masks. + */ +static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) +{ + /* + * Section 4.6 of the "Intel StrongARM SA-1111 Development Module + * User's Guide" mentions that jumpers R51 and R52 control the + * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or + * SDRAM bank 1 on Neponset). The default configuration selects + * Assabet, so any address in bank 1 is necessarily invalid. + */ + return (machine_is_assabet() || machine_is_pfs168()) && + (addr >= 0xc8000000 || (addr + size) >= 0xc8000000); +} + +static int sa1111_notifier_call(struct notifier_block *n, unsigned long action, + void *data) +{ + struct sa1111_dev *dev = SA1111_DEV(data); + + switch (action) { + case BUS_NOTIFY_ADD_DEVICE: + if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) { + int ret = dmabounce_register_dev(&dev->dev, 1024, 4096, + sa1111_needs_bounce); + if (ret) + dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret); + } + break; + + case BUS_NOTIFY_DEL_DEVICE: + if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) + dmabounce_unregister_dev(&dev->dev); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block sa1111_bus_notifier = { + .notifier_call = sa1111_notifier_call, +}; +#endif + static int __init sa1111_init(void) { int ret = bus_register(&sa1111_bus_type); +#ifdef CONFIG_DMABOUNCE + if (ret == 0) + bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier); +#endif if (ret == 0) platform_driver_register(&sa1111_device_driver); return ret; @@ -1360,6 +1446,9 @@ static int __init sa1111_init(void) static void __exit sa1111_exit(void) { platform_driver_unregister(&sa1111_device_driver); +#ifdef CONFIG_DMABOUNCE + bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier); +#endif bus_unregister(&sa1111_bus_type); } diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 8794a34eae61..df13a3ffff35 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -26,6 +26,7 @@ #include <linux/irq.h> #include <linux/io.h> +#include <asm/sched_clock.h> #include <asm/hardware/arm_timer.h> static long __init sp804_get_clock_rate(const char *name) @@ -67,7 +68,16 @@ static long __init sp804_get_clock_rate(const char *name) return rate; } -void __init sp804_clocksource_init(void __iomem *base, const char *name) +static void __iomem *sched_clock_base; + +static u32 sp804_read(void) +{ + return ~readl_relaxed(sched_clock_base + TIMER_VALUE); +} + +void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base, + const char *name, + int use_sched_clock) { long rate = sp804_get_clock_rate(name); @@ -83,6 +93,11 @@ void __init sp804_clocksource_init(void __iomem *base, const char *name) clocksource_mmio_init(base + TIMER_VALUE, name, rate, 200, 32, clocksource_mmio_readl_down); + + if (use_sched_clock) { + sched_clock_base = base; + setup_sched_clock(sp804_read, 32, rate); + } } diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c index 67dd2affc57a..1171a5010aea 100644 --- a/arch/arm/common/via82c505.c +++ b/arch/arm/common/via82c505.c @@ -6,7 +6,6 @@ #include <linux/ioport.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/mach/pci.h> diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig deleted file mode 100644 index 8826eb218e73..000000000000 --- a/arch/arm/configs/at91cap9_defconfig +++ /dev/null @@ -1,108 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91CAP9=y -CONFIG_MACH_AT91CAP9ADK=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 9123568d9a8d..994d331b2319 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -74,6 +74,8 @@ CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y @@ -105,6 +107,7 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index a22e93079063..b5ac644e12af 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -45,6 +45,7 @@ CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_PM_DEBUG=y CONFIG_NET=y +CONFIG_SMSC911X=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y @@ -68,6 +69,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_CFI_I2 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y @@ -78,6 +80,8 @@ CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_NETDEVICES=y +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y CONFIG_DM9000=y CONFIG_SMC91X=y CONFIG_SMC911X=y @@ -115,6 +119,21 @@ CONFIG_FB_IMX=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_L4F00242T03=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_MEDIA=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_OV2640=y +CONFIG_VIDEO_MX2_HOSTSUPPORT=y +CONFIG_VIDEO_MX2=y CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 3a4fb2e5fc68..dc6f6411bbf5 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -5,6 +5,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CGROUPS=y CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set @@ -12,7 +13,6 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y CONFIG_MACH_MX31LILLY=y @@ -26,7 +26,6 @@ CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_KZM_ARM11_01=y CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_EUKREA_CPUIMX35=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y @@ -82,8 +81,9 @@ CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CHELSIO is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y # CONFIG_NET_VENDOR_FARADAY is not set -CONFIG_FEC=y # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set @@ -126,7 +126,40 @@ CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_OV2640=y +CONFIG_MX3_VIDEO=y +CONFIG_VIDEO_MX3=y +CONFIG_FB=y +CONFIG_FB_MX3=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_L4F00242T03=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig new file mode 100644 index 000000000000..fb2088171ca9 --- /dev/null +++ b/arch/arm/configs/lpc32xx_defconfig @@ -0,0 +1,145 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_LPC32XX=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0" +CONFIG_CPU_IDLE=y +CONFIG_FPE_NWFPE=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_FW_LOADER is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_MUSEUM_IDS=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT25=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_SMSC_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_LPC32XX=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_PNX=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_PNX4008_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SOC=y +# CONFIG_HID_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_LIBUSUAL=y +CONFIG_MMC=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_LPC32XX=y +CONFIG_EXT2_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +# CONFIG_ARM_UNWIND is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_ANSI_CPRNG=y +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 443675d317e6..a691ef4c6008 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -101,7 +101,7 @@ CONFIG_MFD_ASIC3=y CONFIG_HTC_EGPIO=y CONFIG_HTC_PASIC3=y CONFIG_REGULATOR=y -CONFIG_REGULATOR_BQ24022=y +CONFIG_REGULATOR_GPIO=y CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_FB_PXA_OVERLAY=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 2472a9585834..42da9183acc8 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_ARCH_S3C2410=y +CONFIG_ARCH_S3C24XX=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y CONFIG_MACH_MINI2440=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 6ee781bf6bf1..1ebbf451c48d 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -77,10 +77,10 @@ CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_I2C=m +CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_MXS=m +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MXS=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_DEBUG_GPIO=y @@ -90,6 +90,20 @@ CONFIG_GPIO_SYSFS=y CONFIG_DISPLAY_SUPPORT=m # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_DRIVERS=y +CONFIG_SND_ARM=y +CONFIG_SND_SOC=y +CONFIG_SND_MXS_SOC=y +CONFIG_SND_SOC_MXS_SGTL5000=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_SGTL5000=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_MMC=y CONFIG_MMC_MXS=y CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f9096c1b0a65..193448f31284 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -3,40 +3,47 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S3C2410=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_ARCH_S3C24XX=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y -CONFIG_ARCH_SMDK2410=y +CONFIG_CPU_S3C2412=y +CONFIG_CPU_S3C2416=y +CONFIG_CPU_S3C2440=y +CONFIG_CPU_S3C2442=y +CONFIG_CPU_S3C2443=y +CONFIG_MACH_AML_M5900=y +CONFIG_ARCH_BAST=y CONFIG_ARCH_H1940=y CONFIG_MACH_N30=y -CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y -CONFIG_MACH_AML_M5900=y +CONFIG_MACH_QT2410=y +CONFIG_ARCH_SMDK2410=y CONFIG_MACH_TCT_HAMMER=y CONFIG_MACH_VR1000=y -CONFIG_MACH_QT2410=y CONFIG_MACH_JIVE=y CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y CONFIG_MACH_SMDK2416=y CONFIG_MACH_ANUBIS=y -CONFIG_MACH_NEO1973_GTA02=y +CONFIG_MACH_AT2440EVB=y +CONFIG_MACH_MINI2440=y +CONFIG_MACH_NEXCODER_2440=y CONFIG_MACH_OSIRIS=y CONFIG_MACH_OSIRIS_DVS=m CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y -CONFIG_MACH_NEXCODER_2440=y -CONFIG_SMDK2440_CPU2442=y -CONFIG_MACH_AT2440EVB=y -CONFIG_MACH_MINI2440=y +CONFIG_MACH_NEO1973_GTA02=y CONFIG_MACH_RX1950=y +CONFIG_SMDK2440_CPU2442=y CONFIG_MACH_SMDK2443=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -45,7 +52,6 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_BINFMT_AOUT=y -CONFIG_PM=y CONFIG_APM_EMULATION=m CONFIG_NET=y CONFIG_PACKET=y @@ -58,7 +64,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m @@ -80,7 +85,6 @@ CONFIG_IPV6_MIP6=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_DCCP=m @@ -138,7 +142,6 @@ CONFIG_IP_VS=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m @@ -150,7 +153,6 @@ CONFIG_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -177,8 +179,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -199,7 +199,6 @@ CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_CMDLINE_PARTS=y @@ -221,9 +220,6 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_ATA_OVER_ETH=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_93CX6=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=m @@ -240,7 +236,6 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_DM9000=y CONFIG_INPUT_EVDEV=y CONFIG_MOUSE_APPLETOUCH=m @@ -274,7 +269,6 @@ CONFIG_JOYSTICK_XPAD_LEDS=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_USB_COMPOSITE=m CONFIG_INPUT_MISC=y -CONFIG_INPUT_ATI_REMOTE=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_POWERMATE=m @@ -300,7 +294,6 @@ CONFIG_I2C_SIMTEC=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_SPI_S3C24XX=m -CONFIG_SPI_S3C24XX_GPIO=m CONFIG_SPI_SPIDEV=m CONFIG_SPI_TLE62X0=m CONFIG_SENSORS_LM75=m @@ -315,7 +308,6 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_FB_S3C2410=y CONFIG_FB_SM501=y CONFIG_BACKLIGHT_PWM=m -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y @@ -330,10 +322,6 @@ CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_CAIAQ=m CONFIG_SND_SOC=y -CONFIG_SND_S3C24XX_SOC=y -CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m -CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m -CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y @@ -387,9 +375,7 @@ CONFIG_MMC_TEST=m CONFIG_MMC_SDHCI=m CONFIG_MMC_SPI=m CONFIG_MMC_S3C=y -CONFIG_LEDS_CLASS=m CONFIG_LEDS_S3C24XX=m -CONFIG_LEDS_H1940=m CONFIG_LEDS_PCA9532=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PCA955X=m @@ -410,8 +396,6 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT4_FS=m CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_INOTIFY=y -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=y @@ -436,9 +420,6 @@ CONFIG_NFSD=m CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m @@ -481,9 +462,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 95c0f0d63db6..1d24f8458bef 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -14,7 +14,7 @@ CONFIG_SLOB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S3C2410=y +CONFIG_ARCH_S3C24XX=y CONFIG_MACH_TCT_HAMMER=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index fd5d3041d717..351d6708c3ae 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -11,11 +11,14 @@ CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_DEV_INITRD=y # CONFIG_ELF_CORE is not set CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y @@ -27,18 +30,20 @@ CONFIG_MACH_PAZ00=y CONFIG_MACH_TRIMSLICE=y CONFIG_MACH_WARIO=y CONFIG_MACH_VENTANA=y -CONFIG_TEGRA_DEBUG_UARTD=y -CONFIG_ARM_ERRATA_742230=y +CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y -CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_AUTO_ZRELADDR=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -68,7 +73,6 @@ CONFIG_IPV6_MULTIPLE_TABLES=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y -CONFIG_MISC_DEVICES=y CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y CONFIG_ICS932S401=y @@ -76,6 +80,7 @@ CONFIG_APDS9802ALS=y CONFIG_ISL29003=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y @@ -85,8 +90,7 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y # CONFIG_WLAN is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set +CONFIG_INPUT_EVDEV=y # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set @@ -96,13 +100,15 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set -# CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_TEGRA=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_TPS6586X=y CONFIG_SOUND=y CONFIG_SND=y @@ -116,11 +122,13 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y +CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_STORAGE=y CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_TEGRA=y @@ -130,6 +138,11 @@ CONFIG_STAGING=y CONFIG_IIO=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_AK8975=y +CONFIG_MFD_NVEC=y +CONFIG_KEYBOARD_NVEC=y +CONFIG_SERIO_NVEC_PS2=y +CONFIG_TEGRA_IOMMU_GART=y +CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -138,13 +151,12 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y @@ -162,9 +174,8 @@ CONFIG_DEBUG_SG=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_TWOFISH=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_TEGRA_AES=y CONFIG_CRC_CCITT=y -CONFIG_CRC16=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d7b6e7b7271..889d73ac1ae1 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -13,6 +13,7 @@ CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y +CONFIG_MACH_UX500_DT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 86976d034382..68374ba6a943 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -13,7 +13,9 @@ #include <linux/compiler.h> #include <linux/types.h> -#include <asm/system.h> +#include <linux/irqflags.h> +#include <asm/barrier.h> +#include <asm/cmpxchg.h> #define ATOMIC_INIT(i) { (i) } diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h new file mode 100644 index 000000000000..44f4a09ff37b --- /dev/null +++ b/arch/arm/include/asm/barrier.h @@ -0,0 +1,69 @@ +#ifndef __ASM_BARRIER_H +#define __ASM_BARRIER_H + +#ifndef __ASSEMBLY__ + +#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); + +#if __LINUX_ARM_ARCH__ >= 7 || \ + (__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K)) +#define sev() __asm__ __volatile__ ("sev" : : : "memory") +#define wfe() __asm__ __volatile__ ("wfe" : : : "memory") +#define wfi() __asm__ __volatile__ ("wfi" : : : "memory") +#endif + +#if __LINUX_ARM_ARCH__ >= 7 +#define isb() __asm__ __volatile__ ("isb" : : : "memory") +#define dsb() __asm__ __volatile__ ("dsb" : : : "memory") +#define dmb() __asm__ __volatile__ ("dmb" : : : "memory") +#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6 +#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ + : : "r" (0) : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ + : : "r" (0) : "memory") +#elif defined(CONFIG_CPU_FA526) +#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ + : : "r" (0) : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("" : : : "memory") +#else +#define isb() __asm__ __volatile__ ("" : : : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("" : : : "memory") +#endif + +#ifdef CONFIG_ARCH_HAS_BARRIERS +#include <mach/barriers.h> +#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) +#include <asm/outercache.h> +#define mb() do { dsb(); outer_sync(); } while (0) +#define rmb() dsb() +#define wmb() mb() +#else +#include <asm/memory.h> +#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#endif + +#ifndef CONFIG_SMP +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#else +#define smp_mb() dmb() +#define smp_rmb() dmb() +#define smp_wmb() dmb() +#endif + +#define read_barrier_depends() do { } while(0) +#define smp_read_barrier_depends() do { } while(0) + +#define set_mb(var, value) do { var = value; smp_mb(); } while (0) + +#endif /* !__ASSEMBLY__ */ +#endif /* __ASM_BARRIER_H */ diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index f7419ef9c8f9..e691ec91e4d3 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -24,7 +24,7 @@ #endif #include <linux/compiler.h> -#include <asm/system.h> +#include <linux/irqflags.h> #define smp_mb__before_clear_bit() smp_mb() #define smp_mb__after_clear_bit() smp_mb() diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h index fac79dceb736..7af5c6c3653a 100644 --- a/arch/arm/include/asm/bug.h +++ b/arch/arm/include/asm/bug.h @@ -1,6 +1,7 @@ #ifndef _ASMARM_BUG_H #define _ASMARM_BUG_H +#include <linux/linkage.h> #ifdef CONFIG_BUG @@ -57,4 +58,33 @@ do { \ #include <asm-generic/bug.h> +struct pt_regs; +void die(const char *msg, struct pt_regs *regs, int err); + +struct siginfo; +void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, + unsigned long err, unsigned long trap); + +#ifdef CONFIG_ARM_LPAE +#define FAULT_CODE_ALIGNMENT 33 +#define FAULT_CODE_DEBUG 34 +#else +#define FAULT_CODE_ALIGNMENT 1 +#define FAULT_CODE_DEBUG 2 +#endif + +void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, + struct pt_regs *), + int sig, int code, const char *name); + +void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, + struct pt_regs *), + int sig, int code, const char *name); + +extern asmlinkage void c_backtrace(unsigned long fp, int pmode); + +struct mm_struct; +extern void show_pte(struct mm_struct *mm, unsigned long addr); +extern void __show_regs(struct pt_regs *); + #endif diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h new file mode 100644 index 000000000000..d41d7cbf0ada --- /dev/null +++ b/arch/arm/include/asm/cmpxchg.h @@ -0,0 +1,295 @@ +#ifndef __ASM_ARM_CMPXCHG_H +#define __ASM_ARM_CMPXCHG_H + +#include <linux/irqflags.h> +#include <asm/barrier.h> + +#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) +/* + * On the StrongARM, "swp" is terminally broken since it bypasses the + * cache totally. This means that the cache becomes inconsistent, and, + * since we use normal loads/stores as well, this is really bad. + * Typically, this causes oopsen in filp_close, but could have other, + * more disastrous effects. There are two work-arounds: + * 1. Disable interrupts and emulate the atomic swap + * 2. Clean the cache, perform atomic swap, flush the cache + * + * We choose (1) since its the "easiest" to achieve here and is not + * dependent on the processor type. + * + * NOTE that this solution won't work on an SMP system, so explcitly + * forbid it here. + */ +#define swp_is_buggy +#endif + +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) +{ + extern void __bad_xchg(volatile void *, int); + unsigned long ret; +#ifdef swp_is_buggy + unsigned long flags; +#endif +#if __LINUX_ARM_ARCH__ >= 6 + unsigned int tmp; +#endif + + smp_mb(); + + switch (size) { +#if __LINUX_ARM_ARCH__ >= 6 + case 1: + asm volatile("@ __xchg1\n" + "1: ldrexb %0, [%3]\n" + " strexb %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; + case 4: + asm volatile("@ __xchg4\n" + "1: ldrex %0, [%3]\n" + " strex %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; +#elif defined(swp_is_buggy) +#ifdef CONFIG_SMP +#error SMP is not supported on this platform +#endif + case 1: + raw_local_irq_save(flags); + ret = *(volatile unsigned char *)ptr; + *(volatile unsigned char *)ptr = x; + raw_local_irq_restore(flags); + break; + + case 4: + raw_local_irq_save(flags); + ret = *(volatile unsigned long *)ptr; + *(volatile unsigned long *)ptr = x; + raw_local_irq_restore(flags); + break; +#else + case 1: + asm volatile("@ __xchg1\n" + " swpb %0, %1, [%2]" + : "=&r" (ret) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; + case 4: + asm volatile("@ __xchg4\n" + " swp %0, %1, [%2]" + : "=&r" (ret) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; +#endif + default: + __bad_xchg(ptr, size), ret = 0; + break; + } + smp_mb(); + + return ret; +} + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +#include <asm-generic/cmpxchg-local.h> + +#if __LINUX_ARM_ARCH__ < 6 +/* min ARCH < ARMv6 */ + +#ifdef CONFIG_SMP +#error "SMP is not supported on this platform" +#endif + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#ifndef CONFIG_SMP +#include <asm-generic/cmpxchg.h> +#endif + +#else /* min ARCH >= ARMv6 */ + +extern void __bad_cmpxchg(volatile void *ptr, int size); + +/* + * cmpxchg only support 32-bits operands on ARMv6. + */ + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long oldval, res; + + switch (size) { +#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ + case 1: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexb %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexbeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + case 2: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexh %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexheq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; +#endif + case 4: + do { + asm volatile("@ __cmpxchg4\n" + " ldrex %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + default: + __bad_cmpxchg(ptr, size); + oldval = 0; + } + + return oldval; +} + +static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + smp_mb(); + ret = __cmpxchg(ptr, old, new, size); + smp_mb(); + + return ret; +} + +#define cmpxchg(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + switch (size) { +#ifdef CONFIG_CPU_V6 /* min ARCH == ARMv6 */ + case 1: + case 2: + ret = __cmpxchg_local_generic(ptr, old, new, size); + break; +#endif + default: + ret = __cmpxchg(ptr, old, new, size); + } + + return ret; +} + +#define cmpxchg_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ + +/* + * Note : ARMv7-M (currently unsupported by Linux) does not support + * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should + * not be allowed to use __cmpxchg64. + */ +static inline unsigned long long __cmpxchg64(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + register unsigned long long oldval asm("r0"); + register unsigned long long __old asm("r2") = old; + register unsigned long long __new asm("r4") = new; + unsigned long res; + + do { + asm volatile( + " @ __cmpxchg8\n" + " ldrexd %1, %H1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " teqeq %H1, %H3\n" + " strexdeq %0, %4, %H4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (__old), "r" (__new) + : "memory", "cc"); + } while (res); + + return oldval; +} + +static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + unsigned long long ret; + + smp_mb(); + ret = __cmpxchg64(ptr, old, new); + smp_mb(); + + return ret; +} + +#define cmpxchg64(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#define cmpxchg64_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#else /* min ARCH = ARMv6 */ + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif + +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + +#endif /* __ASM_ARM_CMPXCHG_H */ diff --git a/arch/arm/include/asm/compiler.h b/arch/arm/include/asm/compiler.h new file mode 100644 index 000000000000..8155db2f7fa1 --- /dev/null +++ b/arch/arm/include/asm/compiler.h @@ -0,0 +1,15 @@ +#ifndef __ASM_ARM_COMPILER_H +#define __ASM_ARM_COMPILER_H + +/* + * This is used to ensure the compiler did actually allocate the register we + * asked it for some inline assembly sequences. Apparently we can't trust + * the compiler from one version to another so a bit of paranoia won't hurt. + * This string is meant to be concatenated with the inline asm string and + * will cause compilation to stop on mismatch. + * (for details, see gcc PR 15089) + */ +#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" + + +#endif /* __ASM_ARM_COMPILER_H */ diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h new file mode 100644 index 000000000000..5ef4d8015a60 --- /dev/null +++ b/arch/arm/include/asm/cp15.h @@ -0,0 +1,87 @@ +#ifndef __ASM_ARM_CP15_H +#define __ASM_ARM_CP15_H + +#include <asm/barrier.h> + +/* + * CR1 bits (CP#15 CR1) + */ +#define CR_M (1 << 0) /* MMU enable */ +#define CR_A (1 << 1) /* Alignment abort enable */ +#define CR_C (1 << 2) /* Dcache enable */ +#define CR_W (1 << 3) /* Write buffer enable */ +#define CR_P (1 << 4) /* 32-bit exception handler */ +#define CR_D (1 << 5) /* 32-bit data address range */ +#define CR_L (1 << 6) /* Implementation defined */ +#define CR_B (1 << 7) /* Big endian */ +#define CR_S (1 << 8) /* System MMU protection */ +#define CR_R (1 << 9) /* ROM MMU protection */ +#define CR_F (1 << 10) /* Implementation defined */ +#define CR_Z (1 << 11) /* Implementation defined */ +#define CR_I (1 << 12) /* Icache enable */ +#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ +#define CR_RR (1 << 14) /* Round Robin cache replacement */ +#define CR_L4 (1 << 15) /* LDR pc can set T bit */ +#define CR_DT (1 << 16) +#define CR_IT (1 << 18) +#define CR_ST (1 << 19) +#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */ +#define CR_U (1 << 22) /* Unaligned access operation */ +#define CR_XP (1 << 23) /* Extended page tables */ +#define CR_VE (1 << 24) /* Vectored interrupts */ +#define CR_EE (1 << 25) /* Exception (Big) Endian */ +#define CR_TRE (1 << 28) /* TEX remap enable */ +#define CR_AFE (1 << 29) /* Access flag enable */ +#define CR_TE (1 << 30) /* Thumb exception enable */ + +#ifndef __ASSEMBLY__ + +#if __LINUX_ARM_ARCH__ >= 4 +#define vectors_high() (cr_alignment & CR_V) +#else +#define vectors_high() (0) +#endif + +extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ +extern unsigned long cr_alignment; /* defined in entry-armv.S */ + +static inline unsigned int get_cr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); + return val; +} + +static inline void set_cr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" + : : "r" (val) : "cc"); + isb(); +} + +#ifndef CONFIG_SMP +extern void adjust_cr(unsigned long mask, unsigned long set); +#endif + +#define CPACC_FULL(n) (3 << (n * 2)) +#define CPACC_SVC(n) (1 << (n * 2)) +#define CPACC_DISABLE(n) (0 << (n * 2)) + +static inline unsigned int get_copro_access(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" + : "=r" (val) : : "cc"); + return val; +} + +static inline void set_copro_access(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" + : : "r" (val) : "cc"); + isb(); +} + +#endif + +#endif diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index d3f0a9eee9f6..fe92ccf1d0b0 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -1,8 +1,8 @@ #ifndef __ASM_ARM_DIV64 #define __ASM_ARM_DIV64 -#include <asm/system.h> #include <linux/types.h> +#include <asm/compiler.h> /* * The semantics of do_div() are: diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 69a5b0b6455c..5694a0d6576b 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -19,7 +19,6 @@ * It should not be re-used except for that purpose. */ #include <linux/spinlock.h> -#include <asm/system.h> #include <asm/scatterlist.h> #include <mach/isa-dma.h> diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index b5dc173d336f..3d2220498abc 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -10,6 +10,10 @@ #ifndef __ASM_PROC_DOMAIN_H #define __ASM_PROC_DOMAIN_H +#ifndef __ASSEMBLY__ +#include <asm/barrier.h> +#endif + /* * Domain numbers * diff --git a/arch/arm/include/asm/exec.h b/arch/arm/include/asm/exec.h new file mode 100644 index 000000000000..7c4fbef72b3a --- /dev/null +++ b/arch/arm/include/asm/exec.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARM_EXEC_H +#define __ASM_ARM_EXEC_H + +#define arch_align_stack(x) (x) + +#endif /* __ASM_ARM_EXEC_H */ diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h index c0f4e7bf22de..d6030ff599db 100644 --- a/arch/arm/include/asm/hardware/arm_timer.h +++ b/arch/arm/include/asm/hardware/arm_timer.h @@ -9,7 +9,12 @@ * * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview * can have 16-bit or 32-bit selectable via a bit in the control register. + * + * Every SP804 contains two identical timers. */ +#define TIMER_1_BASE 0x00 +#define TIMER_2_BASE 0x20 + #define TIMER_LOAD 0x00 /* ACVR rw */ #define TIMER_VALUE 0x04 /* ACVR ro */ #define TIMER_CTRL 0x08 /* ACVR rw */ diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S index e0af4983723f..8c215acd9b57 100644 --- a/arch/arm/include/asm/hardware/entry-macro-iomd.S +++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S @@ -11,14 +11,6 @@ /* IOC / IOMD based hardware */ #include <asm/hardware/iomd.h> - .macro disable_fiq - mov r12, #ioc_base_high - .if ioc_base_low - orr r12, r12, #ioc_base_low - .endif - strb r12, [r12, #0x38] @ Disable FIQ register - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first ldr \tmp, =irq_prio_h diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 077c32326c63..2ff2c75a4639 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -231,6 +231,9 @@ extern int iop3xx_get_init_atu(void); #ifndef __ASSEMBLY__ + +#include <linux/types.h> + void iop3xx_map_io(void); void iop_init_cp6_handler(void); void iop_init_time(unsigned long tickrate); diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h index 92ed254c175b..7c2bbc7f0be1 100644 --- a/arch/arm/include/asm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -132,34 +132,10 @@ #define SKPCR_DCLKEN (1<<7) #define SKPCR_PWMCLKEN (1<<8) -/* - * USB Host controller - */ +/* USB Host controller */ #define SA1111_USB 0x0400 /* - * Offsets from SA1111_USB_BASE - */ -#define SA1111_USB_STATUS 0x0118 -#define SA1111_USB_RESET 0x011c -#define SA1111_USB_IRQTEST 0x0120 - -#define USB_RESET_FORCEIFRESET (1 << 0) -#define USB_RESET_FORCEHCRESET (1 << 1) -#define USB_RESET_CLKGENRESET (1 << 2) -#define USB_RESET_SIMSCALEDOWN (1 << 3) -#define USB_RESET_USBINTTEST (1 << 4) -#define USB_RESET_SLEEPSTBYEN (1 << 5) -#define USB_RESET_PWRSENSELOW (1 << 6) -#define USB_RESET_PWRCTRLLOW (1 << 7) - -#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) -#define USB_STATUS_IRQHCIBUFFACC (1 << 8) -#define USB_STATUS_NIRQHCIM (1 << 9) -#define USB_STATUS_NHCIMFCLR (1 << 10) -#define USB_STATUS_USBPWRSENSE (1 << 11) - -/* * Serial Audio Controller * * Registers @@ -327,22 +303,6 @@ * PC_SSR GPIO Block C Sleep State */ -#define _PA_DDR _SA1111( 0x1000 ) -#define _PA_DRR _SA1111( 0x1004 ) -#define _PA_DWR _SA1111( 0x1004 ) -#define _PA_SDR _SA1111( 0x1008 ) -#define _PA_SSR _SA1111( 0x100c ) -#define _PB_DDR _SA1111( 0x1010 ) -#define _PB_DRR _SA1111( 0x1014 ) -#define _PB_DWR _SA1111( 0x1014 ) -#define _PB_SDR _SA1111( 0x1018 ) -#define _PB_SSR _SA1111( 0x101c ) -#define _PC_DDR _SA1111( 0x1020 ) -#define _PC_DRR _SA1111( 0x1024 ) -#define _PC_DWR _SA1111( 0x1024 ) -#define _PC_SDR _SA1111( 0x1028 ) -#define _PC_SSR _SA1111( 0x102c ) - #define SA1111_GPIO 0x1000 #define SA1111_GPIO_PADDR (0x000) @@ -425,106 +385,30 @@ #define SA1111_WAKEPOL0 0x0034 #define SA1111_WAKEPOL1 0x0038 -/* - * PS/2 Trackpad and Mouse Interfaces - * - * Registers - * PS2CR Control Register - * PS2STAT Status Register - * PS2DATA Transmit/Receive Data register - * PS2CLKDIV Clock Division Register - * PS2PRECNT Clock Precount Register - * PS2TEST1 Test register 1 - * PS2TEST2 Test register 2 - * PS2TEST3 Test register 3 - * PS2TEST4 Test register 4 - */ - +/* PS/2 Trackpad and Mouse Interfaces */ #define SA1111_KBD 0x0a00 #define SA1111_MSE 0x0c00 -/* - * These are offsets from the above bases. - */ -#define SA1111_PS2CR 0x0000 -#define SA1111_PS2STAT 0x0004 -#define SA1111_PS2DATA 0x0008 -#define SA1111_PS2CLKDIV 0x000c -#define SA1111_PS2PRECNT 0x0010 - -#define PS2CR_ENA 0x08 -#define PS2CR_FKD 0x02 -#define PS2CR_FKC 0x01 - -#define PS2STAT_STP 0x0100 -#define PS2STAT_TXE 0x0080 -#define PS2STAT_TXB 0x0040 -#define PS2STAT_RXF 0x0020 -#define PS2STAT_RXB 0x0010 -#define PS2STAT_ENA 0x0008 -#define PS2STAT_RXP 0x0004 -#define PS2STAT_KBD 0x0002 -#define PS2STAT_KBC 0x0001 +/* PCMCIA Interface */ +#define SA1111_PCMCIA 0x1600 -/* - * PCMCIA Interface - * - * Registers - * PCSR Status Register - * PCCR Control Register - * PCSSR Sleep State Register - */ - -#define SA1111_PCMCIA 0x1600 - -/* - * These are offsets from the above base. - */ -#define SA1111_PCCR 0x0000 -#define SA1111_PCSSR 0x0004 -#define SA1111_PCSR 0x0008 - -#define PCSR_S0_READY (1<<0) -#define PCSR_S1_READY (1<<1) -#define PCSR_S0_DETECT (1<<2) -#define PCSR_S1_DETECT (1<<3) -#define PCSR_S0_VS1 (1<<4) -#define PCSR_S0_VS2 (1<<5) -#define PCSR_S1_VS1 (1<<6) -#define PCSR_S1_VS2 (1<<7) -#define PCSR_S0_WP (1<<8) -#define PCSR_S1_WP (1<<9) -#define PCSR_S0_BVD1 (1<<10) -#define PCSR_S0_BVD2 (1<<11) -#define PCSR_S1_BVD1 (1<<12) -#define PCSR_S1_BVD2 (1<<13) - -#define PCCR_S0_RST (1<<0) -#define PCCR_S1_RST (1<<1) -#define PCCR_S0_FLT (1<<2) -#define PCCR_S1_FLT (1<<3) -#define PCCR_S0_PWAITEN (1<<4) -#define PCCR_S1_PWAITEN (1<<5) -#define PCCR_S0_PSE (1<<6) -#define PCCR_S1_PSE (1<<7) - -#define PCSSR_S0_SLEEP (1<<0) -#define PCSSR_S1_SLEEP (1<<1) extern struct bus_type sa1111_bus_type; -#define SA1111_DEVID_SBI 0 -#define SA1111_DEVID_SK 1 -#define SA1111_DEVID_USB 2 -#define SA1111_DEVID_SAC 3 -#define SA1111_DEVID_SSP 4 -#define SA1111_DEVID_PS2 5 -#define SA1111_DEVID_GPIO 6 -#define SA1111_DEVID_INT 7 -#define SA1111_DEVID_PCMCIA 8 +#define SA1111_DEVID_SBI (1 << 0) +#define SA1111_DEVID_SK (1 << 1) +#define SA1111_DEVID_USB (1 << 2) +#define SA1111_DEVID_SAC (1 << 3) +#define SA1111_DEVID_SSP (1 << 4) +#define SA1111_DEVID_PS2 (3 << 5) +#define SA1111_DEVID_PS2_KBD (1 << 5) +#define SA1111_DEVID_PS2_MSE (1 << 6) +#define SA1111_DEVID_GPIO (1 << 7) +#define SA1111_DEVID_INT (1 << 8) +#define SA1111_DEVID_PCMCIA (1 << 9) struct sa1111_dev { struct device dev; @@ -548,6 +432,7 @@ struct sa1111_driver { int (*remove)(struct sa1111_dev *); int (*suspend)(struct sa1111_dev *, pm_message_t); int (*resume)(struct sa1111_dev *); + void (*shutdown)(struct sa1111_dev *); }; #define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) @@ -555,9 +440,10 @@ struct sa1111_driver { #define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) /* - * These frob the SKPCR register. + * These frob the SKPCR register, and call platform specific + * enable/disable functions. */ -void sa1111_enable_device(struct sa1111_dev *); +int sa1111_enable_device(struct sa1111_dev *); void sa1111_disable_device(struct sa1111_dev *); unsigned int sa1111_pll_clock(struct sa1111_dev *); @@ -580,6 +466,10 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i struct sa1111_platform_data { int irq_base; /* base for cascaded on-chip IRQs */ + unsigned disable_devs; + void *data; + int (*enable)(void *, unsigned); + void (*disable)(void *, unsigned); }; #endif /* _ASM_ARCH_SA1111 */ diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h index 4384d81eee79..2dd9d3f83f29 100644 --- a/arch/arm/include/asm/hardware/timer-sp.h +++ b/arch/arm/include/asm/hardware/timer-sp.h @@ -1,2 +1,15 @@ -void sp804_clocksource_init(void __iomem *, const char *); +void __sp804_clocksource_and_sched_clock_init(void __iomem *, + const char *, int); + +static inline void sp804_clocksource_init(void __iomem *base, const char *name) +{ + __sp804_clocksource_and_sched_clock_init(base, name, 0); +} + +static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base, + const char *name) +{ + __sp804_clocksource_and_sched_clock_init(base, name, 1); +} + void sp804_clockevents_init(void __iomem *, unsigned int, const char *); diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 9275828feb3d..bae7eb6011d2 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -26,7 +26,6 @@ #include <linux/types.h> #include <asm/byteorder.h> #include <asm/memory.h> -#include <asm/system.h> #include <asm-generic/pci_iomap.h> /* @@ -99,6 +98,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr) /* IO barriers */ #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE +#include <asm/barrier.h> #define __iormb() rmb() #define __iowmb() wmb() #else diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h index c6a18424888e..f77ffc1eb0c2 100644 --- a/arch/arm/include/asm/localtimer.h +++ b/arch/arm/include/asm/localtimer.h @@ -11,47 +11,24 @@ #define __ASM_ARM_LOCALTIMER_H #include <linux/errno.h> -#include <linux/interrupt.h> struct clock_event_device; -/* - * Setup a per-cpu timer, whether it be a local timer or dummy broadcast - */ -void percpu_timer_setup(void); +struct local_timer_ops { + int (*setup)(struct clock_event_device *); + void (*stop)(struct clock_event_device *); +}; #ifdef CONFIG_LOCAL_TIMERS - -#ifdef CONFIG_HAVE_ARM_TWD - -#include "smp_twd.h" - -#define local_timer_stop(c) twd_timer_stop((c)) - -#else - -/* - * Stop the local timer - */ -void local_timer_stop(struct clock_event_device *); - -#endif - /* - * Setup a local timer interrupt for a CPU. + * Register a local timer driver */ -int local_timer_setup(struct clock_event_device *); - +int local_timer_register(struct local_timer_ops *); #else - -static inline int local_timer_setup(struct clock_event_device *evt) +static inline int local_timer_register(struct local_timer_ops *ops) { return -ENXIO; } - -static inline void local_timer_stop(struct clock_event_device *evt) -{ -} #endif #endif diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 14965658a923..b8e580a297e4 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -34,4 +34,11 @@ typedef struct { #endif +/* + * switch_mm() may do a full cache flush over the context switch, + * so enable interrupts over the context switch to avoid high + * latency. + */ +#define __ARCH_WANT_INTERRUPTS_ON_CTXSW + #endif diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index da337ba57ffd..a98a2e112fae 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -57,14 +57,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); -extern void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res); - -extern void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); - /* * Dummy implementation; always return 0. */ diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index ffc0e85775b4..7ec60d6075bf 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -79,7 +79,6 @@ extern unsigned int kobjsize(const void *objp); * No page table caches to initialise. */ #define pgtable_cache_init() do { } while (0) -#define io_remap_page_range remap_page_range #define io_remap_pfn_range remap_pfn_range diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index cb8d638924fd..f4d7f56ee51f 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,7 +22,6 @@ #include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> -#include <asm/system.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ @@ -90,6 +89,8 @@ unsigned long get_wchan(struct task_struct *p); #define cpu_relax() barrier() #endif +void cpu_idle_wait(void); + /* * Create a new kernel thread */ diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h index ef9ffba97ad8..0f01f4677bd2 100644 --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h @@ -18,11 +18,28 @@ #define TWD_TIMER_CONTROL_PERIODIC (1 << 1) #define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) -struct clock_event_device; +#include <linux/ioport.h> -extern void __iomem *twd_base; +struct twd_local_timer { + struct resource res[2]; +}; -void twd_timer_setup(struct clock_event_device *); -void twd_timer_stop(struct clock_event_device *); +#define DEFINE_TWD_LOCAL_TIMER(name,base,irq) \ +struct twd_local_timer name __initdata = { \ + .res = { \ + DEFINE_RES_MEM(base, 0x10), \ + DEFINE_RES_IRQ(irq), \ + }, \ +}; + +int twd_local_timer_register(struct twd_local_timer *); + +#ifdef CONFIG_HAVE_ARM_TWD +void twd_local_timer_of_register(void); +#else +static inline void twd_local_timer_of_register(void) +{ +} +#endif #endif diff --git a/arch/arm/include/asm/switch_to.h b/arch/arm/include/asm/switch_to.h new file mode 100644 index 000000000000..fa09e6b49bf1 --- /dev/null +++ b/arch/arm/include/asm/switch_to.h @@ -0,0 +1,18 @@ +#ifndef __ASM_ARM_SWITCH_TO_H +#define __ASM_ARM_SWITCH_TO_H + +#include <linux/thread_info.h> + +/* + * switch_to(prev, next) should switch from task `prev' to `next' + * `prev' will never be the same as `next'. schedule() itself + * contains the memory barrier to tell GCC not to cache `current'. + */ +extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); + +#define switch_to(prev,next,last) \ +do { \ + last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \ +} while (0) + +#endif /* __ASM_ARM_SWITCH_TO_H */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index e4c96cc6ec0c..74542c52f9be 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -1,543 +1,8 @@ -#ifndef __ASM_ARM_SYSTEM_H -#define __ASM_ARM_SYSTEM_H - -#ifdef __KERNEL__ - -#define CPU_ARCH_UNKNOWN 0 -#define CPU_ARCH_ARMv3 1 -#define CPU_ARCH_ARMv4 2 -#define CPU_ARCH_ARMv4T 3 -#define CPU_ARCH_ARMv5 4 -#define CPU_ARCH_ARMv5T 5 -#define CPU_ARCH_ARMv5TE 6 -#define CPU_ARCH_ARMv5TEJ 7 -#define CPU_ARCH_ARMv6 8 -#define CPU_ARCH_ARMv7 9 - -/* - * CR1 bits (CP#15 CR1) - */ -#define CR_M (1 << 0) /* MMU enable */ -#define CR_A (1 << 1) /* Alignment abort enable */ -#define CR_C (1 << 2) /* Dcache enable */ -#define CR_W (1 << 3) /* Write buffer enable */ -#define CR_P (1 << 4) /* 32-bit exception handler */ -#define CR_D (1 << 5) /* 32-bit data address range */ -#define CR_L (1 << 6) /* Implementation defined */ -#define CR_B (1 << 7) /* Big endian */ -#define CR_S (1 << 8) /* System MMU protection */ -#define CR_R (1 << 9) /* ROM MMU protection */ -#define CR_F (1 << 10) /* Implementation defined */ -#define CR_Z (1 << 11) /* Implementation defined */ -#define CR_I (1 << 12) /* Icache enable */ -#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ -#define CR_RR (1 << 14) /* Round Robin cache replacement */ -#define CR_L4 (1 << 15) /* LDR pc can set T bit */ -#define CR_DT (1 << 16) -#define CR_IT (1 << 18) -#define CR_ST (1 << 19) -#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */ -#define CR_U (1 << 22) /* Unaligned access operation */ -#define CR_XP (1 << 23) /* Extended page tables */ -#define CR_VE (1 << 24) /* Vectored interrupts */ -#define CR_EE (1 << 25) /* Exception (Big) Endian */ -#define CR_TRE (1 << 28) /* TEX remap enable */ -#define CR_AFE (1 << 29) /* Access flag enable */ -#define CR_TE (1 << 30) /* Thumb exception enable */ - -/* - * This is used to ensure the compiler did actually allocate the register we - * asked it for some inline assembly sequences. Apparently we can't trust - * the compiler from one version to another so a bit of paranoia won't hurt. - * This string is meant to be concatenated with the inline asm string and - * will cause compilation to stop on mismatch. - * (for details, see gcc PR 15089) - */ -#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" - -#ifndef __ASSEMBLY__ - -#include <linux/compiler.h> -#include <linux/linkage.h> -#include <linux/irqflags.h> - -#include <asm/outercache.h> - -struct thread_info; -struct task_struct; - -/* information about the system we're running on */ -extern unsigned int system_rev; -extern unsigned int system_serial_low; -extern unsigned int system_serial_high; -extern unsigned int mem_fclk_21285; - -struct pt_regs; - -void die(const char *msg, struct pt_regs *regs, int err); - -struct siginfo; -void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, - unsigned long err, unsigned long trap); - -#ifdef CONFIG_ARM_LPAE -#define FAULT_CODE_ALIGNMENT 33 -#define FAULT_CODE_DEBUG 34 -#else -#define FAULT_CODE_ALIGNMENT 1 -#define FAULT_CODE_DEBUG 2 -#endif - -void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, - struct pt_regs *), - int sig, int code, const char *name); - -void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, - struct pt_regs *), - int sig, int code, const char *name); - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -extern asmlinkage void c_backtrace(unsigned long fp, int pmode); - -struct mm_struct; -extern void show_pte(struct mm_struct *mm, unsigned long addr); -extern void __show_regs(struct pt_regs *); - -extern int __pure cpu_architecture(void); -extern void cpu_init(void); - -void soft_restart(unsigned long); -extern void (*arm_pm_restart)(char str, const char *cmd); - -#define UDBG_UNDEFINED (1 << 0) -#define UDBG_SYSCALL (1 << 1) -#define UDBG_BADABORT (1 << 2) -#define UDBG_SEGV (1 << 3) -#define UDBG_BUS (1 << 4) - -extern unsigned int user_debug; - -#if __LINUX_ARM_ARCH__ >= 4 -#define vectors_high() (cr_alignment & CR_V) -#else -#define vectors_high() (0) -#endif - -#if __LINUX_ARM_ARCH__ >= 7 || \ - (__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K)) -#define sev() __asm__ __volatile__ ("sev" : : : "memory") -#define wfe() __asm__ __volatile__ ("wfe" : : : "memory") -#define wfi() __asm__ __volatile__ ("wfi" : : : "memory") -#endif - -#if __LINUX_ARM_ARCH__ >= 7 -#define isb() __asm__ __volatile__ ("isb" : : : "memory") -#define dsb() __asm__ __volatile__ ("dsb" : : : "memory") -#define dmb() __asm__ __volatile__ ("dmb" : : : "memory") -#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6 -#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ - : : "r" (0) : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ - : : "r" (0) : "memory") -#elif defined(CONFIG_CPU_FA526) -#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ - : : "r" (0) : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("" : : : "memory") -#else -#define isb() __asm__ __volatile__ ("" : : : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("" : : : "memory") -#endif - -#ifdef CONFIG_ARCH_HAS_BARRIERS -#include <mach/barriers.h> -#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) -#define mb() do { dsb(); outer_sync(); } while (0) -#define rmb() dsb() -#define wmb() mb() -#else -#include <asm/memory.h> -#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#endif - -#ifndef CONFIG_SMP -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#else -#define smp_mb() dmb() -#define smp_rmb() dmb() -#define smp_wmb() dmb() -#endif - -#define read_barrier_depends() do { } while(0) -#define smp_read_barrier_depends() do { } while(0) - -#define set_mb(var, value) do { var = value; smp_mb(); } while (0) -#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); - -extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ -extern unsigned long cr_alignment; /* defined in entry-armv.S */ - -static inline unsigned int get_cr(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); - return val; -} - -static inline void set_cr(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" - : : "r" (val) : "cc"); - isb(); -} - -#ifndef CONFIG_SMP -extern void adjust_cr(unsigned long mask, unsigned long set); -#endif - -#define CPACC_FULL(n) (3 << (n * 2)) -#define CPACC_SVC(n) (1 << (n * 2)) -#define CPACC_DISABLE(n) (0 << (n * 2)) - -static inline unsigned int get_copro_access(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" - : "=r" (val) : : "cc"); - return val; -} - -static inline void set_copro_access(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" - : : "r" (val) : "cc"); - isb(); -} - -/* - * switch_mm() may do a full cache flush over the context switch, - * so enable interrupts over the context switch to avoid high - * latency. - */ -#define __ARCH_WANT_INTERRUPTS_ON_CTXSW - -/* - * switch_to(prev, next) should switch from task `prev' to `next' - * `prev' will never be the same as `next'. schedule() itself - * contains the memory barrier to tell GCC not to cache `current'. - */ -extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); - -#define switch_to(prev,next,last) \ -do { \ - last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \ -} while (0) - -#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) -/* - * On the StrongARM, "swp" is terminally broken since it bypasses the - * cache totally. This means that the cache becomes inconsistent, and, - * since we use normal loads/stores as well, this is really bad. - * Typically, this causes oopsen in filp_close, but could have other, - * more disastrous effects. There are two work-arounds: - * 1. Disable interrupts and emulate the atomic swap - * 2. Clean the cache, perform atomic swap, flush the cache - * - * We choose (1) since its the "easiest" to achieve here and is not - * dependent on the processor type. - * - * NOTE that this solution won't work on an SMP system, so explcitly - * forbid it here. - */ -#define swp_is_buggy -#endif - -static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) -{ - extern void __bad_xchg(volatile void *, int); - unsigned long ret; -#ifdef swp_is_buggy - unsigned long flags; -#endif -#if __LINUX_ARM_ARCH__ >= 6 - unsigned int tmp; -#endif - - smp_mb(); - - switch (size) { -#if __LINUX_ARM_ARCH__ >= 6 - case 1: - asm volatile("@ __xchg1\n" - "1: ldrexb %0, [%3]\n" - " strexb %1, %2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (ret), "=&r" (tmp) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: - asm volatile("@ __xchg4\n" - "1: ldrex %0, [%3]\n" - " strex %1, %2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (ret), "=&r" (tmp) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; -#elif defined(swp_is_buggy) -#ifdef CONFIG_SMP -#error SMP is not supported on this platform -#endif - case 1: - raw_local_irq_save(flags); - ret = *(volatile unsigned char *)ptr; - *(volatile unsigned char *)ptr = x; - raw_local_irq_restore(flags); - break; - - case 4: - raw_local_irq_save(flags); - ret = *(volatile unsigned long *)ptr; - *(volatile unsigned long *)ptr = x; - raw_local_irq_restore(flags); - break; -#else - case 1: - asm volatile("@ __xchg1\n" - " swpb %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: - asm volatile("@ __xchg4\n" - " swp %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; -#endif - default: - __bad_xchg(ptr, size), ret = 0; - break; - } - smp_mb(); - - return ret; -} - -extern void disable_hlt(void); -extern void enable_hlt(void); - -void cpu_idle_wait(void); - -#include <asm-generic/cmpxchg-local.h> - -#if __LINUX_ARM_ARCH__ < 6 -/* min ARCH < ARMv6 */ - -#ifdef CONFIG_SMP -#error "SMP is not supported on this platform" -#endif - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#ifndef CONFIG_SMP -#include <asm-generic/cmpxchg.h> -#endif - -#else /* min ARCH >= ARMv6 */ - -extern void __bad_cmpxchg(volatile void *ptr, int size); - -/* - * cmpxchg only support 32-bits operands on ARMv6. - */ - -static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, - unsigned long new, int size) -{ - unsigned long oldval, res; - - switch (size) { -#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ - case 1: - do { - asm volatile("@ __cmpxchg1\n" - " ldrexb %1, [%2]\n" - " mov %0, #0\n" - " teq %1, %3\n" - " strexbeq %0, %4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (ptr), "Ir" (old), "r" (new) - : "memory", "cc"); - } while (res); - break; - case 2: - do { - asm volatile("@ __cmpxchg1\n" - " ldrexh %1, [%2]\n" - " mov %0, #0\n" - " teq %1, %3\n" - " strexheq %0, %4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (ptr), "Ir" (old), "r" (new) - : "memory", "cc"); - } while (res); - break; -#endif - case 4: - do { - asm volatile("@ __cmpxchg4\n" - " ldrex %1, [%2]\n" - " mov %0, #0\n" - " teq %1, %3\n" - " strexeq %0, %4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (ptr), "Ir" (old), "r" (new) - : "memory", "cc"); - } while (res); - break; - default: - __bad_cmpxchg(ptr, size); - oldval = 0; - } - - return oldval; -} - -static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, - unsigned long new, int size) -{ - unsigned long ret; - - smp_mb(); - ret = __cmpxchg(ptr, old, new, size); - smp_mb(); - - return ret; -} - -#define cmpxchg(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ - (unsigned long)(o), \ - (unsigned long)(n), \ - sizeof(*(ptr)))) - -static inline unsigned long __cmpxchg_local(volatile void *ptr, - unsigned long old, - unsigned long new, int size) -{ - unsigned long ret; - - switch (size) { -#ifdef CONFIG_CPU_V6 /* min ARCH == ARMv6 */ - case 1: - case 2: - ret = __cmpxchg_local_generic(ptr, old, new, size); - break; -#endif - default: - ret = __cmpxchg(ptr, old, new, size); - } - - return ret; -} - -#define cmpxchg_local(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ - (unsigned long)(o), \ - (unsigned long)(n), \ - sizeof(*(ptr)))) - -#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ - -/* - * Note : ARMv7-M (currently unsupported by Linux) does not support - * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should - * not be allowed to use __cmpxchg64. - */ -static inline unsigned long long __cmpxchg64(volatile void *ptr, - unsigned long long old, - unsigned long long new) -{ - register unsigned long long oldval asm("r0"); - register unsigned long long __old asm("r2") = old; - register unsigned long long __new asm("r4") = new; - unsigned long res; - - do { - asm volatile( - " @ __cmpxchg8\n" - " ldrexd %1, %H1, [%2]\n" - " mov %0, #0\n" - " teq %1, %3\n" - " teqeq %H1, %H3\n" - " strexdeq %0, %4, %H4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (ptr), "Ir" (__old), "r" (__new) - : "memory", "cc"); - } while (res); - - return oldval; -} - -static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, - unsigned long long old, - unsigned long long new) -{ - unsigned long long ret; - - smp_mb(); - ret = __cmpxchg64(ptr, old, new); - smp_mb(); - - return ret; -} - -#define cmpxchg64(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n))) - -#define cmpxchg64_local(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n))) - -#else /* min ARCH = ARMv6 */ - -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#endif - -#endif /* __LINUX_ARM_ARCH__ >= 6 */ - -#endif /* __ASSEMBLY__ */ - -#define arch_align_stack(x) (x) - -#endif /* __KERNEL__ */ - -#endif +/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */ +#include <asm/barrier.h> +#include <asm/compiler.h> +#include <asm/cmpxchg.h> +#include <asm/exec.h> +#include <asm/switch_to.h> +#include <asm/system_info.h> +#include <asm/system_misc.h> diff --git a/arch/arm/include/asm/system_info.h b/arch/arm/include/asm/system_info.h new file mode 100644 index 000000000000..dfd386d0c022 --- /dev/null +++ b/arch/arm/include/asm/system_info.h @@ -0,0 +1,27 @@ +#ifndef __ASM_ARM_SYSTEM_INFO_H +#define __ASM_ARM_SYSTEM_INFO_H + +#define CPU_ARCH_UNKNOWN 0 +#define CPU_ARCH_ARMv3 1 +#define CPU_ARCH_ARMv4 2 +#define CPU_ARCH_ARMv4T 3 +#define CPU_ARCH_ARMv5 4 +#define CPU_ARCH_ARMv5T 5 +#define CPU_ARCH_ARMv5TE 6 +#define CPU_ARCH_ARMv5TEJ 7 +#define CPU_ARCH_ARMv6 8 +#define CPU_ARCH_ARMv7 9 + +#ifndef __ASSEMBLY__ + +/* information about the system we're running on */ +extern unsigned int system_rev; +extern unsigned int system_serial_low; +extern unsigned int system_serial_high; +extern unsigned int mem_fclk_21285; + +extern int __pure cpu_architecture(void); + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_ARM_SYSTEM_INFO_H */ diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h new file mode 100644 index 000000000000..5a85f148b607 --- /dev/null +++ b/arch/arm/include/asm/system_misc.h @@ -0,0 +1,29 @@ +#ifndef __ASM_ARM_SYSTEM_MISC_H +#define __ASM_ARM_SYSTEM_MISC_H + +#ifndef __ASSEMBLY__ + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <linux/irqflags.h> + +extern void cpu_init(void); + +void soft_restart(unsigned long); +extern void (*arm_pm_restart)(char str, const char *cmd); +extern void (*arm_pm_idle)(void); + +#define UDBG_UNDEFINED (1 << 0) +#define UDBG_SYSCALL (1 << 1) +#define UDBG_BADABORT (1 << 2) +#define UDBG_SEGV (1 << 3) +#define UDBG_BUS (1 << 4) + +extern unsigned int user_debug; + +extern void disable_hlt(void); +extern void enable_hlt(void); + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_ARM_SYSTEM_MISC_H */ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 2958976d867b..71f6536d17ac 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -16,8 +16,8 @@ #include <asm/errno.h> #include <asm/memory.h> #include <asm/domain.h> -#include <asm/system.h> #include <asm/unified.h> +#include <asm/compiler.h> #define VERIFY_READ 0 #define VERIFY_WRITE 1 diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 43b740d0e374..3a274878412e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_ISA_DMA_API) += dma.o -obj-$(CONFIG_ARCH_ACORN) += ecard.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o @@ -62,9 +61,6 @@ obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o CFLAGS_swp_emulate.o := -Wa,-march=armv7-a obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o -obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o -AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 - obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 5b0bce61eb69..b57c75e0b01f 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -18,7 +18,6 @@ #include <linux/io.h> #include <asm/checksum.h> -#include <asm/system.h> #include <asm/ftrace.h> /* diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index f58ba3589908..632df9a66f8c 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -16,7 +16,6 @@ #include <asm/mach/pci.h> static int debug_pci; -static int use_firmware; /* * We can't use pci_find_device() here since we are @@ -295,28 +294,6 @@ static inline int pdev_bad_for_parity(struct pci_dev *dev) } /* - * Adjust the device resources from bus-centric to Linux-centric. - */ -static void __devinit -pdev_fixup_device_resources(struct pci_sys_data *root, struct pci_dev *dev) -{ - resource_size_t offset; - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - if (dev->resource[i].start == 0) - continue; - if (dev->resource[i].flags & IORESOURCE_MEM) - offset = root->mem_offset; - else - offset = root->io_offset; - - dev->resource[i].start += offset; - dev->resource[i].end += offset; - } -} - -/* * pcibios_fixup_bus - Called after each bus is probed, * but before its children are examined. */ @@ -333,8 +310,6 @@ void pcibios_fixup_bus(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { u16 status; - pdev_fixup_device_resources(root, dev); - pci_read_config_word(dev, PCI_STATUS, &status); /* @@ -400,43 +375,6 @@ EXPORT_SYMBOL(pcibios_fixup_bus); #endif /* - * Convert from Linux-centric to bus-centric addresses for bridge devices. - */ -void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - struct pci_sys_data *root = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = root->io_offset; - if (res->flags & IORESOURCE_MEM) - offset = root->mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} -EXPORT_SYMBOL(pcibios_resource_to_bus); - -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - struct pci_sys_data *root = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = root->io_offset; - if (res->flags & IORESOURCE_MEM) - offset = root->mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} -EXPORT_SYMBOL(pcibios_bus_to_resource); - -/* * Swizzle the device pin each time we cross a bridge. * This might update pin and returns the slot number. */ @@ -497,10 +435,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw) if (ret > 0) { if (list_empty(&sys->resources)) { - pci_add_resource(&sys->resources, - &ioport_resource); - pci_add_resource(&sys->resources, - &iomem_resource); + pci_add_resource_offset(&sys->resources, + &ioport_resource, sys->io_offset); + pci_add_resource_offset(&sys->resources, + &iomem_resource, sys->mem_offset); } sys->bus = hw->scan(nr, sys); @@ -525,6 +463,7 @@ void __init pci_common_init(struct hw_pci *hw) INIT_LIST_HEAD(&hw->buses); + pci_add_flags(PCI_REASSIGN_ALL_RSRC); if (hw->preinit) hw->preinit(); pcibios_init_hw(hw); @@ -536,7 +475,7 @@ void __init pci_common_init(struct hw_pci *hw) list_for_each_entry(sys, &hw->buses, node) { struct pci_bus *bus = sys->bus; - if (!use_firmware) { + if (!pci_has_flag(PCI_PROBE_ONLY)) { /* * Size the bridge windows. */ @@ -573,7 +512,7 @@ char * __init pcibios_setup(char *str) debug_pci = 1; return NULL; } else if (!strcmp(str, "firmware")) { - use_firmware = 1; + pci_add_flags(PCI_PROBE_ONLY); return NULL; } return str; diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index ddba41d1fcf1..d0d1e83150c9 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -3,6 +3,7 @@ #include <linux/personality.h> #include <linux/binfmts.h> #include <linux/elf.h> +#include <asm/system_info.h> int elf_check_arch(const struct elf32_hdr *x) { diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index be16a48007b4..8ec5eed55e37 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -19,12 +19,14 @@ #include <asm/glue-df.h> #include <asm/glue-pf.h> #include <asm/vfpmacros.h> +#ifndef CONFIG_MULTI_IRQ_HANDLER #include <mach/entry-macro.S> +#endif #include <asm/thread_notify.h> #include <asm/unwind.h> #include <asm/unistd.h> #include <asm/tls.h> -#include <asm/system.h> +#include <asm/system_info.h> #include "entry-header.S" #include <asm/entry-macro-multi.S> @@ -1101,7 +1103,6 @@ __stubs_start: * get out of that mode without clobbering one register. */ vector_fiq: - disable_fiq subs pc, lr, #4 /*============================================================================= diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 9fd0ba90c1d2..54ee265dd819 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -10,9 +10,15 @@ #include <asm/unistd.h> #include <asm/ftrace.h> -#include <mach/entry-macro.S> #include <asm/unwind.h> +#ifdef CONFIG_NEED_RET_TO_USER +#include <mach/entry-macro.S> +#else + .macro arch_ret_to_user, tmp1, tmp2 + .endm +#endif + #include "entry-header.S" diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 4c164ece5891..c32f8456aa09 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -42,9 +42,9 @@ #include <linux/seq_file.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/fiq.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/traps.h> static unsigned long no_fiq_insn; diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index d46f25968bec..278cfc144f44 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -17,8 +17,8 @@ #include <asm/assembler.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> +#include <asm/cp15.h> #include <asm/thread_info.h> -#include <asm/system.h> /* * Kernel startup entry point. diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 6d5791144066..a2e9694a68ee 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -15,12 +15,12 @@ #include <linux/init.h> #include <asm/assembler.h> +#include <asm/cp15.h> #include <asm/domain.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> #include <asm/memory.h> #include <asm/thread_info.h> -#include <asm/system.h> #include <asm/pgtable.h> #ifdef CONFIG_DEBUG_LL diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index d6a95ef9131d..ba386bd94107 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -34,7 +34,6 @@ #include <asm/current.h> #include <asm/hw_breakpoint.h> #include <asm/kdebug.h> -#include <asm/system.h> #include <asm/traps.h> /* Breakpoint currently in use for each BRP. */ diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 3efd82cc95f0..6a6a097edd61 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -36,7 +36,6 @@ #include <linux/proc_fs.h> #include <asm/exception.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> diff --git a/arch/arm/kernel/kprobes-common.c b/arch/arm/kernel/kprobes-common.c index a5394fb4e4e0..18a76282970e 100644 --- a/arch/arm/kernel/kprobes-common.c +++ b/arch/arm/kernel/kprobes-common.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> +#include <asm/system_info.h> #include "kprobes.h" diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 764bd456d84f..56995983eed8 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -12,7 +12,7 @@ #include <asm/mmu_context.h> #include <asm/cacheflush.h> #include <asm/mach-types.h> -#include <asm/system.h> +#include <asm/system_misc.h> extern const unsigned char relocate_new_kernel[]; extern const unsigned int relocate_new_kernel_size; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index c2ae3cd331fe..7b9cddef6e53 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -35,7 +35,6 @@ #include <asm/cacheflush.h> #include <asm/leds.h> #include <asm/processor.h> -#include <asm/system.h> #include <asm/thread_notify.h> #include <asm/stacktrace.h> #include <asm/mach/time.h> @@ -61,8 +60,6 @@ extern void setup_mm_for_reboot(void); static volatile int hlt_counter; -#include <mach/system.h> - void disable_hlt(void) { hlt_counter++; @@ -181,13 +178,17 @@ void cpu_idle_wait(void) EXPORT_SYMBOL_GPL(cpu_idle_wait); /* - * This is our default idle handler. We need to disable - * interrupts here to ensure we don't miss a wakeup call. + * This is our default idle handler. */ + +void (*arm_pm_idle)(void); + static void default_idle(void) { - if (!need_resched()) - arch_idle(); + if (arm_pm_idle) + arm_pm_idle(); + else + cpu_do_idle(); local_irq_enable(); } @@ -215,6 +216,10 @@ void cpu_idle(void) cpu_die(); #endif + /* + * We need to disable interrupts here + * to ensure we don't miss a wakeup call. + */ local_irq_disable(); #ifdef CONFIG_PL310_ERRATA_769419 wmb(); @@ -222,19 +227,18 @@ void cpu_idle(void) if (hlt_counter) { local_irq_enable(); cpu_relax(); - } else { + } else if (!need_resched()) { stop_critical_timings(); if (cpuidle_idle_call()) pm_idle(); start_critical_timings(); /* - * This will eventually be removed - pm_idle - * functions should always return with IRQs - * enabled. + * pm_idle functions must always + * return with IRQs enabled. */ WARN_ON(irqs_disabled()); + } else local_irq_enable(); - } } leds_event(led_idle_end); rcu_idle_exit(); @@ -533,8 +537,7 @@ int vectors_user_mapping(void) struct mm_struct *mm = current->mm; return install_special_mapping(mm, 0xffff0000, PAGE_SIZE, VM_READ | VM_EXEC | - VM_MAYREAD | VM_MAYEXEC | - VM_ALWAYSDUMP | VM_RESERVED, + VM_MAYREAD | VM_MAYEXEC | VM_RESERVED, NULL); } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index ede6443c34d9..45956c9d0ef0 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -26,7 +26,6 @@ #include <linux/audit.h> #include <asm/pgtable.h> -#include <asm/system.h> #include <asm/traps.h> #define REG_PC 15 diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index a255c39612ca..9e0fdb3a1988 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -33,6 +33,7 @@ #include <linux/sort.h> #include <asm/unified.h> +#include <asm/cp15.h> #include <asm/cpu.h> #include <asm/cputype.h> #include <asm/elf.h> @@ -44,12 +45,13 @@ #include <asm/cacheflush.h> #include <asm/cachetype.h> #include <asm/tlbflush.h> -#include <asm/system.h> #include <asm/prom.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include <asm/system_info.h> +#include <asm/system_misc.h> #include <asm/traps.h> #include <asm/unwind.h> #include <asm/memblock.h> diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 1f268bda4552..987dcf33415c 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -4,7 +4,6 @@ #include <asm/assembler.h> #include <asm/glue-cache.h> #include <asm/glue-proc.h> -#include <asm/system.h> .text /* diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d616ed51e7a7..8f8cce2c46c4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -246,6 +246,8 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid) store_cpu_topology(cpuid); } +static void percpu_timer_setup(void); + /* * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. @@ -452,7 +454,20 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) clockevents_register_device(evt); } -void __cpuinit percpu_timer_setup(void) +static struct local_timer_ops *lt_ops; + +#ifdef CONFIG_LOCAL_TIMERS +int local_timer_register(struct local_timer_ops *ops) +{ + if (lt_ops) + return -EBUSY; + + lt_ops = ops; + return 0; +} +#endif + +static void __cpuinit percpu_timer_setup(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); @@ -460,7 +475,7 @@ void __cpuinit percpu_timer_setup(void) evt->cpumask = cpumask_of(cpu); evt->broadcast = smp_timer_broadcast; - if (local_timer_setup(evt)) + if (!lt_ops || lt_ops->setup(evt)) broadcast_timer_setup(evt); } @@ -475,7 +490,8 @@ static void percpu_timer_stop(void) unsigned int cpu = smp_processor_id(); struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); - local_timer_stop(evt); + if (lt_ops) + lt_ops->stop(evt); } #endif diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index 7dcb35285be7..02c5d2ce23bf 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -13,18 +13,6 @@ #include <asm/smp_plat.h> #include <asm/tlbflush.h> -static void on_each_cpu_mask(void (*func)(void *), void *info, int wait, - const struct cpumask *mask) -{ - preempt_disable(); - - smp_call_function_many(mask, func, info, wait); - if (cpumask_test_cpu(smp_processor_id(), mask)) - func(info); - - preempt_enable(); -} - /**********************************************************************/ /* @@ -87,7 +75,7 @@ void flush_tlb_all(void) void flush_tlb_mm(struct mm_struct *mm) { if (tlb_ops_need_broadcast()) - on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm)); + on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1); else local_flush_tlb_mm(mm); } @@ -98,7 +86,8 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = uaddr; - on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm)); + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_page, + &ta, 1); } else local_flush_tlb_page(vma, uaddr); } @@ -121,7 +110,8 @@ void flush_tlb_range(struct vm_area_struct *vma, ta.ta_vma = vma; ta.ta_start = start; ta.ta_end = end; - on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm)); + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_range, + &ta, 1); } else local_flush_tlb_range(vma, start, end); } diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 7a79b24597b2..fef42b21cecb 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -18,20 +18,23 @@ #include <linux/smp.h> #include <linux/jiffies.h> #include <linux/clockchips.h> -#include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/io.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> #include <asm/smp_twd.h> #include <asm/localtimer.h> #include <asm/hardware/gic.h> /* set up by the platform code */ -void __iomem *twd_base; +static void __iomem *twd_base; static struct clk *twd_clk; static unsigned long twd_timer_rate; static struct clock_event_device __percpu **twd_evt; +static int twd_ppi; static void twd_set_mode(enum clock_event_mode mode, struct clock_event_device *clk) @@ -77,7 +80,7 @@ static int twd_set_next_event(unsigned long evt, * If a local timer interrupt has occurred, acknowledge and return 1. * Otherwise, return 0. */ -int twd_timer_ack(void) +static int twd_timer_ack(void) { if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) { __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); @@ -87,7 +90,7 @@ int twd_timer_ack(void) return 0; } -void twd_timer_stop(struct clock_event_device *clk) +static void twd_timer_stop(struct clock_event_device *clk) { twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk); disable_percpu_irq(clk->irq); @@ -222,28 +225,10 @@ static struct clk *twd_get_clock(void) /* * Setup the local clock events for a CPU. */ -void __cpuinit twd_timer_setup(struct clock_event_device *clk) +static int __cpuinit twd_timer_setup(struct clock_event_device *clk) { struct clock_event_device **this_cpu_clk; - if (!twd_evt) { - int err; - - twd_evt = alloc_percpu(struct clock_event_device *); - if (!twd_evt) { - pr_err("twd: can't allocate memory\n"); - return; - } - - err = request_percpu_irq(clk->irq, twd_handler, - "twd", twd_evt); - if (err) { - pr_err("twd: can't register interrupt %d (%d)\n", - clk->irq, err); - return; - } - } - if (!twd_clk) twd_clk = twd_get_clock(); @@ -260,6 +245,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->rating = 350; clk->set_mode = twd_set_mode; clk->set_next_event = twd_set_next_event; + clk->irq = twd_ppi; this_cpu_clk = __this_cpu_ptr(twd_evt); *this_cpu_clk = clk; @@ -267,4 +253,95 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clockevents_config_and_register(clk, twd_timer_rate, 0xf, 0xffffffff); enable_percpu_irq(clk->irq, 0); + + return 0; +} + +static struct local_timer_ops twd_lt_ops __cpuinitdata = { + .setup = twd_timer_setup, + .stop = twd_timer_stop, +}; + +static int __init twd_local_timer_common_register(void) +{ + int err; + + twd_evt = alloc_percpu(struct clock_event_device *); + if (!twd_evt) { + err = -ENOMEM; + goto out_free; + } + + err = request_percpu_irq(twd_ppi, twd_handler, "twd", twd_evt); + if (err) { + pr_err("twd: can't register interrupt %d (%d)\n", twd_ppi, err); + goto out_free; + } + + err = local_timer_register(&twd_lt_ops); + if (err) + goto out_irq; + + return 0; + +out_irq: + free_percpu_irq(twd_ppi, twd_evt); +out_free: + iounmap(twd_base); + twd_base = NULL; + free_percpu(twd_evt); + + return err; } + +int __init twd_local_timer_register(struct twd_local_timer *tlt) +{ + if (twd_base || twd_evt) + return -EBUSY; + + twd_ppi = tlt->res[1].start; + + twd_base = ioremap(tlt->res[0].start, resource_size(&tlt->res[0])); + if (!twd_base) + return -ENOMEM; + + return twd_local_timer_common_register(); +} + +#ifdef CONFIG_OF +const static struct of_device_id twd_of_match[] __initconst = { + { .compatible = "arm,cortex-a9-twd-timer", }, + { .compatible = "arm,cortex-a5-twd-timer", }, + { .compatible = "arm,arm11mp-twd-timer", }, + { }, +}; + +void __init twd_local_timer_of_register(void) +{ + struct device_node *np; + int err; + + np = of_find_matching_node(NULL, twd_of_match); + if (!np) { + err = -ENODEV; + goto out; + } + + twd_ppi = irq_of_parse_and_map(np, 0); + if (!twd_ppi) { + err = -EINVAL; + goto out; + } + + twd_base = of_iomap(np, 0); + if (!twd_base) { + err = -ENOMEM; + goto out; + } + + err = twd_local_timer_common_register(); + +out: + WARN(err, "twd_local_timer_of_register failed (%d)\n", err); +} +#endif diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 01ec453bb924..30ae6bb4a310 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -16,6 +16,7 @@ #include <asm/cputype.h> #include <asm/mach/map.h> #include <asm/memory.h> +#include <asm/system_info.h> #include "tcm.h" static struct gen_pool *tcm_pool; diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c index 9cb7aaca159f..aab899764053 100644 --- a/arch/arm/kernel/thumbee.c +++ b/arch/arm/kernel/thumbee.c @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <asm/system_info.h> #include <asm/thread_notify.h> /* diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f84dfe67724f..cd77743472a2 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -29,11 +29,11 @@ #include <linux/atomic.h> #include <asm/cacheflush.h> #include <asm/exception.h> -#include <asm/system.h> #include <asm/unistd.h> #include <asm/traps.h> #include <asm/unwind.h> #include <asm/tls.h> +#include <asm/system_misc.h> #include "signal.h" diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 71feb00a1e99..45db05d8d94c 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -20,9 +20,11 @@ config HAVE_AT91_USART5 config AT91_SAM9_ALT_RESET bool + default !ARCH_AT91X40 config AT91_SAM9G45_RESET bool + default !ARCH_AT91X40 menu "Atmel AT91 System-on-Chip" @@ -45,7 +47,6 @@ config ARCH_AT91SAM9260 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9261 bool "AT91SAM9261" @@ -53,7 +54,6 @@ config ARCH_AT91SAM9261 select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G10 bool "AT91SAM9G10" @@ -61,7 +61,6 @@ config ARCH_AT91SAM9G10 select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9263 bool "AT91SAM9263" @@ -70,7 +69,6 @@ config ARCH_AT91SAM9263 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9RL bool "AT91SAM9RL" @@ -79,7 +77,6 @@ config ARCH_AT91SAM9RL select HAVE_AT91_USART3 select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G20 bool "AT91SAM9G20" @@ -90,7 +87,6 @@ config ARCH_AT91SAM9G20 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G45 bool "AT91SAM9G45" @@ -100,16 +96,14 @@ config ARCH_AT91SAM9G45 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 - select AT91_SAM9G45_RESET -config ARCH_AT91CAP9 - bool "AT91CAP9" +config ARCH_AT91SAM9X5 + bool "AT91SAM9x5 family" select CPU_ARM926T select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_NET_MACB - select HAVE_AT91_DBGU1 - select AT91_SAM9G45_RESET + select HAVE_AT91_DBGU0 config ARCH_AT91X40 bool "AT91x40" @@ -447,21 +441,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT91CAP9 - -comment "AT91CAP9 Board Type" - -config MACH_AT91CAP9ADK - bool "Atmel AT91CAP9A-DK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -544,7 +523,7 @@ config AT91_EARLY_DBGU0 depends on HAVE_AT91_DBGU0 config AT91_EARLY_DBGU1 - bool "DBGU on 9263, 9g45 and cap9" + bool "DBGU on 9263 and 9g45" depends on HAVE_AT91_DBGU1 config AT91_EARLY_USART0 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 705e1fbded39..8512e53bed93 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_d obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -81,9 +81,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o -# AT91CAP9 board-specific support -obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 8ddafadfdc7d..0da66ca4a4f8 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -3,11 +3,7 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM -ifeq ($(CONFIG_ARCH_AT91CAP9),y) - zreladdr-y += 0x70008000 -params_phys-y := 0x70000100 -initrd_phys-y := 0x70410000 -else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) +ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 @@ -17,4 +13,10 @@ params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 endif -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb usb_a9g20.dtb +# Keep dtb files sorted alphabetically for each SoC +# sam9g20 +dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb +# sam9g45 +dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb +# sam9x5 +dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c deleted file mode 100644 index a42edc25a87e..000000000000 --- a/arch/arm/mach-at91/at91cap9.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * arch/arm/mach-at91/at91cap9.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <linux/module.h> - -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/cpu.h> -#include <mach/at91cap9.h> -#include <mach/at91_pmc.h> - -#include "soc.h" -#include "generic.h" -#include "clock.h" -#include "sam9_smc.h" - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioABCD_clk = { - .name = "pioABCD_clk", - .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb0_clk = { - .name = "mpb0_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb1_clk = { - .name = "mpb1_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb2_clk = { - .name = "mpb2_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb3_clk = { - .name = "mpb3_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb4_clk = { - .name = "mpb4_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB4, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91CAP9_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91CAP9_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91CAP9_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc0_clk = { - .name = "mci0_clk", - .pmc_mask = 1 << AT91CAP9_ID_MCI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc1_clk = { - .name = "mci1_clk", - .pmc_mask = 1 << AT91CAP9_ID_MCI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can_clk = { - .name = "can_clk", - .pmc_mask = 1 << AT91CAP9_ID_CAN, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91CAP9_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91CAP9_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91CAP9_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91CAP9_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91CAP9_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ac97_clk = { - .name = "ac97_clk", - .pmc_mask = 1 << AT91CAP9_ID_AC97C, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb_clk = { - .name = "tcb_clk", - .pmc_mask = 1 << AT91CAP9_ID_TCB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91CAP9_ID_PWMC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91CAP9_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk aestdes_clk = { - .name = "aestdes_clk", - .pmc_mask = 1 << AT91CAP9_ID_AESTDES, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_clk = { - .name = "adc_clk", - .pmc_mask = 1 << AT91CAP9_ID_ADC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91CAP9_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91CAP9_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma_clk = { - .name = "dma_clk", - .pmc_mask = 1 << AT91CAP9_ID_DMA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udphs_clk = { - .name = "udphs_clk", - .pmc_mask = 1 << AT91CAP9_ID_UDPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91CAP9_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioABCD_clk, - &mpb0_clk, - &mpb1_clk, - &mpb2_clk, - &mpb3_clk, - &mpb4_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc0_clk, - &mmc1_clk, - &can_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ac97_clk, - &tcb_clk, - &pwm_clk, - &macb_clk, - &aestdes_clk, - &adc_clk, - &isi_clk, - &lcdc_clk, - &dma_clk, - &udphs_clk, - &ohci_clk, - // irq0 .. irq1 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* One additional fake clock for macb_hclk */ - CLKDEV_CON_ID("hclk", &macb_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), - CLKDEV_CON_ID("pioA", &pioABCD_clk), - CLKDEV_CON_ID("pioB", &pioABCD_clk), - CLKDEV_CON_ID("pioC", &pioABCD_clk), - CLKDEV_CON_ID("pioD", &pioABCD_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The four programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static void __init at91cap9_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); -} - -static struct clk_lookup console_clock_lookup; - -void __init at91cap9_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91cap9_gpio[] __initdata = { - { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOA, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOB, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOC, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOD, - } -}; - -/* -------------------------------------------------------------------- - * AT91CAP9 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91cap9_map_io(void) -{ - at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE); -} - -static void __init at91cap9_ioremap_registers(void) -{ - at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); - at91_ioremap_rstc(AT91CAP9_BASE_RSTC); - at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); - at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); -} - -static void __init at91cap9_initialize(void) -{ - arm_pm_restart = at91sam9g45_restart; - at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); - - /* Register GPIO subsystem */ - at91_gpio_init(at91cap9_gpio, 4); - - /* Remember the silicon revision */ - if (cpu_is_at91cap9_revB()) - system_rev = 0xB; - else if (cpu_is_at91cap9_revC()) - system_rev = 0xC; -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A, B, C and D */ - 0, /* MP Block Peripheral 0 */ - 0, /* MP Block Peripheral 1 */ - 0, /* MP Block Peripheral 2 */ - 0, /* MP Block Peripheral 3 */ - 0, /* MP Block Peripheral 4 */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface 0 */ - 0, /* Multimedia Card Interface 1 */ - 3, /* CAN */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 5, /* AC97 Controller */ - 0, /* Timer Counter 0, 1 and 2 */ - 0, /* Pulse Width Modulation Controller */ - 3, /* Ethernet */ - 0, /* Advanced Encryption Standard, Triple DES*/ - 0, /* Analog-to-Digital Converter */ - 0, /* Image Sensor Interface */ - 3, /* LCD Controller */ - 0, /* DMA Controller */ - 2, /* USB Device Port */ - 2, /* USB Host port */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ -}; - -struct at91_init_soc __initdata at91cap9_soc = { - .map_io = at91cap9_map_io, - .default_irq_priority = at91cap9_default_irq_priority, - .ioremap_registers = at91cap9_ioremap_registers, - .register_clocks = at91cap9_register_clocks, - .init = at91cap9_initialize, -}; diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c deleted file mode 100644 index d298fb7cb210..000000000000 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ /dev/null @@ -1,1273 +0,0 @@ -/* - * arch/arm/mach-at91/at91cap9_devices.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <video/atmel_lcdc.h> - -#include <mach/board.h> -#include <mach/cpu.h> -#include <mach/at91cap9.h> -#include <mach/at91cap9_matrix.h> -#include <mach/at91sam9_smc.h> - -#include "generic.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91CAP9_UHP_BASE, - .end = AT91CAP9_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_UHP, - .end = AT91CAP9_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - if (cpu_is_at91cap9_revB()) - irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); - - /* Enable VBus control for UHP ports */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); - } - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB HS Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE) - -static struct resource usba_udc_resources[] = { - [0] = { - .start = AT91CAP9_UDPHS_FIFO, - .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_BASE_UDPHS, - .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = AT91CAP9_ID_UDPHS, - .end = AT91CAP9_ID_UDPHS, - .flags = IORESOURCE_IRQ, - }, -}; - -#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ - [idx] = { \ - .name = nam, \ - .index = idx, \ - .fifo_size = maxpkt, \ - .nr_banks = maxbk, \ - .can_dma = dma, \ - .can_isoc = isoc, \ - } - -static struct usba_ep_data usba_udc_ep[] = { - EP("ep0", 0, 64, 1, 0, 0), - EP("ep1", 1, 1024, 3, 1, 1), - EP("ep2", 2, 1024, 3, 1, 1), - EP("ep3", 3, 1024, 2, 1, 1), - EP("ep4", 4, 1024, 2, 1, 1), - EP("ep5", 5, 1024, 2, 1, 0), - EP("ep6", 6, 1024, 2, 1, 0), - EP("ep7", 7, 1024, 2, 0, 0), -}; - -#undef EP - -/* - * pdata doesn't have room for any endpoints, so we need to - * append room for the ones we need right after it. - */ -static struct { - struct usba_platform_data pdata; - struct usba_ep_data ep[8]; -} usba_udc_data; - -static struct platform_device at91_usba_udc_device = { - .name = "atmel_usba_udc", - .id = -1, - .dev = { - .platform_data = &usba_udc_data.pdata, - }, - .resource = usba_udc_resources, - .num_resources = ARRAY_SIZE(usba_udc_resources), -}; - -void __init at91_add_device_usba(struct usba_platform_data *data) -{ - if (cpu_is_at91cap9_revB()) { - irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); - at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS | - AT91_MATRIX_UDPHS_BYPASS_LOCK); - } - else - at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS); - - /* - * Invalid pins are 0 on AT91, but the usba driver is shared - * with AVR32, which use negative values instead. Once/if - * gpio_is_valid() is ported to AT91, revisit this code. - */ - usba_udc_data.pdata.vbus_pin = -EINVAL; - usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); - memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep)); - - if (data && gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - usba_udc_data.pdata.vbus_pin = data->vbus_pin; - } - - /* Pullup pin is handled internally by USB device peripheral */ - - platform_device_register(&at91_usba_udc_device); -} -#else -void __init at91_add_device_usba(struct usba_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91CAP9_BASE_EMAC, - .end = AT91CAP9_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_EMAC, - .end = AT91CAP9_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ - - if (!data->is_rmii) { - at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ - } - - eth_data = *data; - platform_device_register(&at91cap9_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc0_data, mmc1_data; - -static struct resource mmc0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_MCI0, - .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_MCI0, - .end = AT91CAP9_ID_MCI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_mmc0_device = { - .name = "at91_mci", - .id = 0, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc0_data, - }, - .resource = mmc0_resources, - .num_resources = ARRAY_SIZE(mmc0_resources), -}; - -static struct resource mmc1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_MCI1, - .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_MCI1, - .end = AT91CAP9_ID_MCI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_mmc1_device = { - .name = "at91_mci", - .id = 1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc1_data, - }, - .resource = mmc1_resources, - .num_resources = ARRAY_SIZE(mmc1_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - if (mmc_id == 0) { /* MCI0 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); - } - - mmc0_data = *data; - platform_device_register(&at91cap9_mmc0_device); - } else { /* MCI1 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA16, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA17, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA18, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); - at91_set_A_periph(AT91_PIN_PA21, 1); - } - - mmc1_data = *data; - platform_device_register(&at91cap9_mmc1_device); - } -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_BASE_ECC, - .end = AT91CAP9_BASE_ECC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - nand_data = *data; - platform_device_register(&at91cap9_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PB4, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PB5, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91cap9_twi_device = { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91cap9_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91CAP9_BASE_TWI, - .end = AT91CAP9_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_TWI, - .end = AT91CAP9_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_twi_device = { - .name = "at91_i2c", - .id = -1, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI interface */ - at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91cap9_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SPI0, - .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SPI0, - .end = AT91CAP9_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SPI1, - .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SPI1, - .end = AT91CAP9_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at91cap9_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - - platform_device_register(&at91cap9_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT91CAP9_BASE_TCB0, - .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_TCB, - .end = AT91CAP9_ID_TCB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91cap9_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91CAP9_BASE_RTT, - .end = AT91CAP9_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at91cap9_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91CAP9_BASE_WDT, - .end = AT91CAP9_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91cap9_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * PWM - * --------------------------------------------------------------------*/ - -#if defined(CONFIG_ATMEL_PWM) -static u32 pwm_mask; - -static struct resource pwm_resources[] = { - [0] = { - .start = AT91CAP9_BASE_PWMC, - .end = AT91CAP9_BASE_PWMC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_PWMC, - .end = AT91CAP9_ID_PWMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_pwm0_device = { - .name = "atmel_pwm", - .id = -1, - .dev = { - .platform_data = &pwm_mask, - }, - .resource = pwm_resources, - .num_resources = ARRAY_SIZE(pwm_resources), -}; - -void __init at91_add_device_pwm(u32 mask) -{ - if (mask & (1 << AT91_PWM0)) - at91_set_A_periph(AT91_PIN_PB19, 1); /* enable PWM0 */ - - if (mask & (1 << AT91_PWM1)) - at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */ - - if (mask & (1 << AT91_PWM2)) - at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */ - - if (mask & (1 << AT91_PWM3)) - at91_set_B_periph(AT91_PIN_PA11, 1); /* enable PWM3 */ - - pwm_mask = mask; - - platform_device_register(&at91cap9_pwm0_device); -} -#else -void __init at91_add_device_pwm(u32 mask) {} -#endif - - - -/* -------------------------------------------------------------------- - * AC97 - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) -static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct ac97c_platform_data ac97_data; - -static struct resource ac97_resources[] = { - [0] = { - .start = AT91CAP9_BASE_AC97C, - .end = AT91CAP9_BASE_AC97C + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_AC97C, - .end = AT91CAP9_ID_AC97C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ac97_device = { - .name = "atmel_ac97c", - .id = 1, - .dev = { - .dma_mask = &ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ac97_data, - }, - .resource = ac97_resources, - .num_resources = ARRAY_SIZE(ac97_resources), -}; - -void __init at91_add_device_ac97(struct ac97c_platform_data *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */ - at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */ - - /* reset */ - if (gpio_is_valid(data->reset_pin)) - at91_set_gpio_output(data->reset_pin, 0); - - ac97_data = *data; - platform_device_register(&at91cap9_ac97_device); -} -#else -void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_info lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91CAP9_LCDC_BASE, - .end = AT91CAP9_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_LCDC, - .end = AT91CAP9_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) -{ - if (!data) - return; - - if (cpu_is_at91cap9_revB()) - irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); - - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ - at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ - - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SSC0, - .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SSC0, - .end = AT91CAP9_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ssc0_device = { - .name = "ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB0, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB1, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB2, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB3, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB4, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB5, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SSC1, - .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SSC1, - .end = AT91CAP9_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ssc1_device = { - .name = "ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB6, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB7, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB8, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB9, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB10, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB11, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91CAP9_ID_SSC0: - pdev = &at91cap9_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91CAP9_ID_SSC1: - pdev = &at91cap9_ssc1_device; - configure_ssc1_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91CAP9_BASE_DBGU, - .end = AT91CAP9_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US0, - .end = AT91CAP9_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US0, - .end = AT91CAP9_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US1, - .end = AT91CAP9_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US1, - .end = AT91CAP9_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US2, - .end = AT91CAP9_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US2, - .end = AT91CAP9_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91cap9_dbgu_device; - configure_dbgu_pins(); - break; - case AT91CAP9_ID_US0: - pdev = &at91cap9_uart0_device; - configure_usart0_pins(pins); - break; - case AT91CAP9_ID_US1: - pdev = &at91cap9_uart1_device; - configure_usart1_pins(pins); - break; - case AT91CAP9_ID_US2: - pdev = &at91cap9_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91cap9_set_console_clock(at91_uarts[portnr]->id); - } -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 99c3174e24a2..364c19357e60 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -15,6 +15,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/at91rm9200.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> @@ -289,13 +290,22 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = { } }; +static void at91rm9200_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK); +} + static void at91rm9200_restart(char mode, const char *cmd) { /* * Perform a hardware reset with the use of the Watchdog timer. */ - at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); - at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); + at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); + at91_st_write(AT91_ST_CR, AT91_ST_WDRST); } /* -------------------------------------------------------------------- @@ -310,10 +320,13 @@ static void __init at91rm9200_map_io(void) static void __init at91rm9200_ioremap_registers(void) { + at91rm9200_ioremap_st(AT91RM9200_BASE_ST); + at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256); } static void __init at91rm9200_initialize(void) { + arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 97676bdae998..99ce5c955e39 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -21,6 +21,7 @@ #include <mach/board.h> #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" @@ -241,15 +242,15 @@ void __init at91_add_device_cf(struct at91_cf_data *data) data->chipselect = 4; /* can only use EBI ChipSelect 4 */ /* CF takes over CS4, CS5, CS6 */ - csa = at91_sys_read(AT91_EBI_CSA); - at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH); + csa = at91_ramc_read(0, AT91_EBI_CSA); + at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH); /* * Static memory controller timing adjustments. * REVISIT: these timings are in terms of MCK cycles, so * when MCK changes (cpufreq etc) so must these values... */ - at91_sys_write(AT91_SMC_CSR(4), + at91_ramc_write(0, AT91_SMC_CSR(4), AT91_SMC_ACSS_STD | AT91_SMC_DBW_16 | AT91_SMC_BAT @@ -407,11 +408,11 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) return; /* enable the address range of CS3 */ - csa = at91_sys_read(AT91_EBI_CSA); - at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA); + csa = at91_ramc_read(0, AT91_EBI_CSA); + at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ - at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN + at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN | AT91_SMC_NWS_(5) | AT91_SMC_TDF_(1) | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */ @@ -1114,7 +1115,6 @@ static inline void configure_usart3_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index a028cdf8f974..dd7f782b0b91 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -43,9 +43,9 @@ static inline unsigned long read_CRTR(void) { unsigned long x1, x2; - x1 = at91_sys_read(AT91_ST_CRTR); + x1 = at91_st_read(AT91_ST_CRTR); do { - x2 = at91_sys_read(AT91_ST_CRTR); + x2 = at91_st_read(AT91_ST_CRTR); if (x1 == x2) break; x1 = x2; @@ -58,7 +58,7 @@ static inline unsigned long read_CRTR(void) */ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) { - u32 sr = at91_sys_read(AT91_ST_SR) & irqmask; + u32 sr = at91_st_read(AT91_ST_SR) & irqmask; /* * irqs should be disabled here, but as the irq is shared they are only @@ -110,22 +110,22 @@ static void clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) { /* Disable and flush pending timer interrupts */ - at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS); - (void) at91_sys_read(AT91_ST_SR); + at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS); + at91_st_read(AT91_ST_SR); last_crtr = read_CRTR(); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: /* PIT for periodic irqs; fixed rate of 1/HZ */ irqmask = AT91_ST_PITS; - at91_sys_write(AT91_ST_PIMR, RM9200_TIMER_LATCH); + at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH); break; case CLOCK_EVT_MODE_ONESHOT: /* ALM for oneshot irqs, set by next_event() * before 32 seconds have passed */ irqmask = AT91_ST_ALMS; - at91_sys_write(AT91_ST_RTAR, last_crtr); + at91_st_write(AT91_ST_RTAR, last_crtr); break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: @@ -133,7 +133,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) irqmask = 0; break; } - at91_sys_write(AT91_ST_IER, irqmask); + at91_st_write(AT91_ST_IER, irqmask); } static int @@ -156,12 +156,12 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) alm = read_CRTR(); /* Cancel any pending alarm; flush any pending IRQ */ - at91_sys_write(AT91_ST_RTAR, alm); - (void) at91_sys_read(AT91_ST_SR); + at91_st_write(AT91_ST_RTAR, alm); + at91_st_read(AT91_ST_SR); /* Schedule alarm by writing RTAR. */ alm += delta; - at91_sys_write(AT91_ST_RTAR, alm); + at91_st_write(AT91_ST_RTAR, alm); return status; } @@ -175,15 +175,24 @@ static struct clock_event_device clkevt = { .set_mode = clkevt32k_mode, }; +void __iomem *at91_st_base; + +void __init at91rm9200_ioremap_st(u32 addr) +{ + at91_st_base = ioremap(addr, 256); + if (!at91_st_base) + panic("Impossible to ioremap ST\n"); +} + /* * ST (system timer) module supports both clockevents and clocksource. */ void __init at91rm9200_timer_init(void) { /* Disable all timer interrupts, and clear any pending ones */ - at91_sys_write(AT91_ST_IDR, + at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); - (void) at91_sys_read(AT91_ST_SR); + at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); @@ -192,7 +201,7 @@ void __init at91rm9200_timer_init(void) * directly for the clocksource and all clockevents, after adjusting * its prescaler from the 1 Hz default. */ - at91_sys_write(AT91_ST_RTMR, 1); + at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index d4036ba43612..46f774233298 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -12,9 +12,11 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> @@ -208,6 +210,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk), CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), + /* more tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), + CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -309,27 +319,27 @@ static void __init at91sam9xe_map_io(void) static void __init at91sam9260_map_io(void) { - if (cpu_is_at91sam9xe()) { + if (cpu_is_at91sam9xe()) at91sam9xe_map_io(); - } else if (cpu_is_at91sam9g20()) { - at91_init_sram(0, AT91SAM9G20_SRAM0_BASE, AT91SAM9G20_SRAM0_SIZE); - at91_init_sram(1, AT91SAM9G20_SRAM1_BASE, AT91SAM9G20_SRAM1_SIZE); - } else { - at91_init_sram(0, AT91SAM9260_SRAM0_BASE, AT91SAM9260_SRAM0_SIZE); - at91_init_sram(1, AT91SAM9260_SRAM1_BASE, AT91SAM9260_SRAM1_SIZE); - } + else if (cpu_is_at91sam9g20()) + at91_init_sram(0, AT91SAM9G20_SRAM_BASE, AT91SAM9G20_SRAM_SIZE); + else + at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE); } static void __init at91sam9260_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); + at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX); } static void __init at91sam9260_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 5a24f0b4554d..7e5651ee9f85 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -21,6 +21,7 @@ #include <mach/cpu.h> #include <mach/at91sam9260.h> #include <mach/at91sam9260_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include "generic.h" @@ -422,8 +423,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -641,7 +642,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) static struct resource tcb0_resources[] = { [0] = { .start = AT91SAM9260_BASE_TCB0, - .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1, + .end = AT91SAM9260_BASE_TCB0 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -671,7 +672,7 @@ static struct platform_device at91sam9260_tcb0_device = { static struct resource tcb1_resources[] = { [0] = { .start = AT91SAM9260_BASE_TCB1, - .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1, + .end = AT91SAM9260_BASE_TCB1 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -698,8 +699,25 @@ static struct platform_device at91sam9260_tcb1_device = { .num_resources = ARRAY_SIZE(tcb1_resources), }; +#if defined(CONFIG_OF) +static struct of_device_id tcb_ids[] = { + { .compatible = "atmel,at91rm9200-tcb" }, + { /*sentinel*/ } +}; +#endif + static void __init at91_add_device_tc(void) { +#if defined(CONFIG_OF) + struct device_node *np; + + np = of_find_matching_node(NULL, tcb_ids); + if (np) { + of_node_put(np); + return; + } +#endif + platform_device_register(&at91sam9260_tcb0_device); platform_device_register(&at91sam9260_tcb1_device); } @@ -717,18 +735,42 @@ static struct resource rtt_resources[] = { .start = AT91SAM9260_BASE_RTT, .end = AT91SAM9260_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, - } + }, { + .flags = IORESOURCE_MEM, + }, }; static struct platform_device at91sam9260_rtt_device = { .name = "at91_rtt", .id = 0, .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), }; + +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + at91sam9260_rtt_device.name = "rtc-at91sam9"; + /* + * The second resource is needed: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9260_rtt_device.num_resources = 2; + rtt_resources[1].start = AT91SAM9260_BASE_GPBR + + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + rtt_resources[1].end = rtt_resources[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9260_rtt_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9260_rtt_device); } @@ -1139,7 +1181,6 @@ static inline void configure_usart5_pins(void) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { @@ -1264,7 +1305,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); switch (data->chipselect) { case 4: @@ -1287,7 +1328,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) return; } - at91_sys_write(AT91_MATRIX_EBICSA, csa); + at91_matrix_write(AT91_MATRIX_EBICSA, csa); if (gpio_is_valid(data->rst_pin)) { at91_set_multi_drive(data->rst_pin, 0); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 023c2ff138df..7de81e6222f1 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -12,9 +12,11 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> #include <mach/at91_pmc.h> @@ -282,12 +284,15 @@ static void __init at91sam9261_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9261_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); + at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX); } static void __init at91sam9261_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 1e28bed8f425..096da87dc00d 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -24,6 +24,7 @@ #include <mach/board.h> #include <mach/at91sam9261.h> #include <mach/at91sam9261_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include "generic.h" @@ -236,8 +237,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -603,6 +604,8 @@ static struct resource rtt_resources[] = { .start = AT91SAM9261_BASE_RTT, .end = AT91SAM9261_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -610,11 +613,32 @@ static struct platform_device at91sam9261_rtt_device = { .name = "at91_rtt", .id = 0, .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + at91sam9261_rtt_device.name = "rtc-at91sam9"; + /* + * The second resource is needed: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9261_rtt_device.num_resources = 2; + rtt_resources[1].start = AT91SAM9261_BASE_GPBR + + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + rtt_resources[1].end = rtt_resources[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9261_rtt_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9261_rtt_device); } @@ -991,7 +1015,6 @@ static inline void configure_usart2_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 75e876c258af..ef301be66575 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -12,9 +12,11 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/at91sam9263.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> @@ -302,13 +304,17 @@ static void __init at91sam9263_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9263_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512); + at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512); at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); + at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX); } static void __init at91sam9263_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 366a7765635b..53688c46f956 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -23,6 +23,7 @@ #include <mach/board.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include "generic.h" @@ -409,7 +410,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) * we assume SMC timings are configured by board code, * except True IDE where timings are controlled by driver */ - ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); switch (data->chipselect) { case 4: at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ @@ -428,7 +429,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) data->chipselect); return; } - at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa); + at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa); if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); @@ -496,8 +497,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); + at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -891,7 +892,8 @@ static struct platform_device at91sam9263_isi_device = { .num_resources = ARRAY_SIZE(isi_resources), }; -void __init at91_add_device_isi(void) +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) { at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ @@ -904,14 +906,20 @@ void __init at91_add_device_isi(void) at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ - at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ + + if (use_pck_as_mck) { + at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ + + /* TODO: register the PCK for ISI_MCK and set its parent */ + } } #else -void __init at91_add_device_isi(void) {} +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) {} #endif @@ -959,6 +967,8 @@ static struct resource rtt0_resources[] = { .start = AT91SAM9263_BASE_RTT0, .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -966,7 +976,6 @@ static struct platform_device at91sam9263_rtt0_device = { .name = "at91_rtt", .id = 0, .resource = rtt0_resources, - .num_resources = ARRAY_SIZE(rtt0_resources), }; static struct resource rtt1_resources[] = { @@ -974,6 +983,8 @@ static struct resource rtt1_resources[] = { .start = AT91SAM9263_BASE_RTT1, .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -981,11 +992,53 @@ static struct platform_device at91sam9263_rtt1_device = { .name = "at91_rtt", .id = 1, .resource = rtt1_resources, - .num_resources = ARRAY_SIZE(rtt1_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + struct platform_device *pdev; + struct resource *r; + + switch (CONFIG_RTC_DRV_AT91SAM9_RTT) { + case 0: + /* + * The second resource is needed only for the chosen RTT: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 1; + pdev = &at91sam9263_rtt0_device; + r = rtt0_resources; + break; + case 1: + at91sam9263_rtt0_device.num_resources = 1; + at91sam9263_rtt1_device.num_resources = 2; + pdev = &at91sam9263_rtt1_device; + r = rtt1_resources; + break; + default: + pr_err("at91sam9263: only supports 2 RTT (%d)\n", + CONFIG_RTC_DRV_AT91SAM9_RTT); + return; + } + + pdev->name = "rtc-at91sam9"; + r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + r[1].end = r[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9263_rtt0_device.num_resources = 1; + at91sam9263_rtt1_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9263_rtt0_device); platform_device_register(&at91sam9263_rtt1_device); } @@ -1371,7 +1424,6 @@ static inline void configure_usart2_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index d89ead740a99..a94758b42737 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -14,6 +14,9 @@ #include <linux/kernel.h> #include <linux/clk.h> #include <linux/clockchips.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -133,7 +136,8 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91sam926x_pit_interrupt + .handler = at91sam926x_pit_interrupt, + .irq = AT91_ID_SYS, }; static void at91sam926x_pit_reset(void) @@ -149,6 +153,51 @@ static void at91sam926x_pit_reset(void) pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); } +#ifdef CONFIG_OF +static struct of_device_id pit_timer_ids[] = { + { .compatible = "atmel,at91sam9260-pit" }, + { /* sentinel */ } +}; + +static int __init of_at91sam926x_pit_init(void) +{ + struct device_node *np; + int ret; + + np = of_find_matching_node(NULL, pit_timer_ids); + if (!np) + goto err; + + pit_base_addr = of_iomap(np, 0); + if (!pit_base_addr) + goto node_err; + + /* Get the interrupts property */ + ret = irq_of_parse_and_map(np, 0); + if (!ret) { + pr_crit("AT91: PIT: Unable to get IRQ from DT\n"); + goto ioremap_err; + } + at91sam926x_pit_irq.irq = ret; + + of_node_put(np); + + return 0; + +ioremap_err: + iounmap(pit_base_addr); +node_err: + of_node_put(np); +err: + return -EINVAL; +} +#else +static int __init of_at91sam926x_pit_init(void) +{ + return -EINVAL; +} +#endif + /* * Set up both clocksource and clockevent support. */ @@ -156,6 +205,10 @@ static void __init at91sam926x_pit_init(void) { unsigned long pit_rate; unsigned bits; + int ret; + + /* For device tree enabled device: initialize here */ + of_at91sam926x_pit_init(); /* * Use our actual MCK to figure out how many MCK/16 ticks per @@ -177,7 +230,9 @@ static void __init at91sam926x_pit_init(void) clocksource_register_hz(&pit_clk, pit_rate); /* Set up irq handler */ - setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq); + ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq); + if (ret) + pr_crit("AT91: PIT: Unable to setup IRQ\n"); /* Set up and register clockevents */ pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift); @@ -193,6 +248,15 @@ static void at91sam926x_pit_suspend(void) void __init at91sam926x_ioremap_pit(u32 addr) { +#if defined(CONFIG_OF) + struct device_node *np = + of_find_matching_node(NULL, pit_timer_ids); + + if (np) { + of_node_put(np); + return; + } +#endif pit_base_addr = ioremap(addr, 16); if (!pit_base_addr) diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index 518e42377171..7af2e108b8a0 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -15,16 +15,17 @@ #include <linux/linkage.h> #include <mach/hardware.h> -#include <mach/at91sam9_sdramc.h> +#include <mach/at91_ramc.h> #include <mach/at91_rstc.h> .arm .globl at91sam9_alt_restart -at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants - ldr r1, =at91_rstc_base - ldr r1, [r1] +at91sam9_alt_restart: ldr r0, =at91_ramc_base @ preload constants + ldr r0, [r0] + ldr r4, =at91_rstc_base + ldr r1, [r4] mov r2, #1 mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN @@ -37,6 +38,3 @@ at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants str r4, [r1, #AT91_RSTC_CR] @ reset processor b . - -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_SDRAMC0 diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 1cb6a96b1c1e..d222f8333dab 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -16,6 +16,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/at91sam9g45.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> @@ -229,6 +230,11 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk), CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk), + /* more tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -331,12 +337,16 @@ static void __init at91sam9g45_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512); + at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512); at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC); + at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX); } static void __init at91sam9g45_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 96e2adcd5a84..4320b2096789 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -14,6 +14,7 @@ #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/clk.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> @@ -24,11 +25,15 @@ #include <mach/board.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/at_hdmac.h> #include <mach/atmel-mci.h> +#include <media/atmel-isi.h> + #include "generic.h" +#include "clock.h" /* -------------------------------------------------------------------- @@ -553,8 +558,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -870,6 +875,96 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} #endif +/* -------------------------------------------------------------------- + * Image Sensor Interface + * -------------------------------------------------------------------- */ +#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE) +static u64 isi_dmamask = DMA_BIT_MASK(32); +static struct isi_platform_data isi_data; + +struct resource isi_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_ISI, + .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_ISI, + .end = AT91SAM9G45_ID_ISI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_isi_device = { + .name = "atmel_isi", + .id = 0, + .dev = { + .dma_mask = &isi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &isi_data, + }, + .resource = isi_resources, + .num_resources = ARRAY_SIZE(isi_resources), +}; + +static struct clk_lookup isi_mck_lookups[] = { + CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL), +}; + +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) +{ + struct clk *pck; + struct clk *parent; + + if (!data) + return; + isi_data = *data; + + at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */ + at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */ + at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */ + at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */ + at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */ + at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */ + + platform_device_register(&at91sam9g45_isi_device); + + if (use_pck_as_mck) { + at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */ + + pck = clk_get(NULL, "pck1"); + parent = clk_get(NULL, "plla"); + + BUG_ON(IS_ERR(pck) || IS_ERR(parent)); + + if (clk_set_parent(pck, parent)) { + pr_err("Failed to set PCK's parent\n"); + } else { + /* Register PCK as ISI_MCK */ + isi_mck_lookups[0].clk = pck; + clkdev_add_table(isi_mck_lookups, + ARRAY_SIZE(isi_mck_lookups)); + } + + clk_put(pck); + clk_put(parent); + } +} +#else +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) {} +#endif + /* -------------------------------------------------------------------- * LCD Controller @@ -957,7 +1052,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} static struct resource tcb0_resources[] = { [0] = { .start = AT91SAM9G45_BASE_TCB0, - .end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1, + .end = AT91SAM9G45_BASE_TCB0 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -978,7 +1073,7 @@ static struct platform_device at91sam9g45_tcb0_device = { static struct resource tcb1_resources[] = { [0] = { .start = AT91SAM9G45_BASE_TCB1, - .end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1, + .end = AT91SAM9G45_BASE_TCB1 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -995,8 +1090,25 @@ static struct platform_device at91sam9g45_tcb1_device = { .num_resources = ARRAY_SIZE(tcb1_resources), }; +#if defined(CONFIG_OF) +static struct of_device_id tcb_ids[] = { + { .compatible = "atmel,at91rm9200-tcb" }, + { /*sentinel*/ } +}; +#endif + static void __init at91_add_device_tc(void) { +#if defined(CONFIG_OF) + struct device_node *np; + + np = of_find_matching_node(NULL, tcb_ids); + if (np) { + of_node_put(np); + return; + } +#endif + platform_device_register(&at91sam9g45_tcb0_device); platform_device_register(&at91sam9g45_tcb1_device); } @@ -1099,6 +1211,8 @@ static struct resource rtt_resources[] = { .start = AT91SAM9G45_BASE_RTT, .end = AT91SAM9G45_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -1106,11 +1220,32 @@ static struct platform_device at91sam9g45_rtt_device = { .name = "at91_rtt", .id = 0, .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + at91sam9g45_rtt_device.name = "rtc-at91sam9"; + /* + * The second resource is needed: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9g45_rtt_device.num_resources = 2; + rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + rtt_resources[1].end = rtt_resources[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9g45_rtt_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9g45_rtt_device); } @@ -1565,7 +1700,6 @@ static inline void configure_usart3_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S index 0468be10980b..9d457182c86c 100644 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -12,7 +12,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> -#include <mach/at91sam9_ddrsdr.h> +#include <mach/at91_ramc.h> #include <mach/at91_rstc.h> .arm @@ -20,9 +20,10 @@ .globl at91sam9g45_restart at91sam9g45_restart: - ldr r0, .at91_va_base_sdramc0 @ preload constants - ldr r1, =at91_rstc_base - ldr r1, [r1] + ldr r5, =at91_ramc_base @ preload constants + ldr r0, [r5] + ldr r4, =at91_rstc_base + ldr r1, [r4] mov r2, #1 mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN @@ -35,6 +36,3 @@ at91sam9g45_restart: str r4, [r1, #AT91_RSTC_CR] @ reset processor b . - -.at91_va_base_sdramc0: - .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d2c91a841cb8..d9f2774f385e 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -11,9 +11,11 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> @@ -287,12 +289,15 @@ static void __init at91sam9rl_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); + at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX); } static void __init at91sam9rl_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 9be71c11d0f0..eda72e83037d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -20,6 +20,7 @@ #include <mach/board.h> #include <mach/at91sam9rl.h> #include <mach/at91sam9rl_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/at_hdmac.h> @@ -265,8 +266,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -682,6 +683,8 @@ static struct resource rtt_resources[] = { .start = AT91SAM9RL_BASE_RTT, .end = AT91SAM9RL_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -689,11 +692,32 @@ static struct platform_device at91sam9rl_rtt_device = { .name = "at91_rtt", .id = 0, .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + at91sam9rl_rtt_device.name = "rtc-at91sam9"; + /* + * The second resource is needed: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9rl_rtt_device.num_resources = 2; + rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + rtt_resources[1].end = rtt_resources[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9rl_rtt_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9rl_rtt_device); } @@ -1128,7 +1152,6 @@ static inline void configure_usart3_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c new file mode 100644 index 000000000000..b6831eeb7b76 --- /dev/null +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -0,0 +1,359 @@ +/* + * Chip-specific setup code for the AT91SAM9x5 family + * + * Copyright (C) 2010-2012 Atmel Corporation. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> + +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/at91sam9x5.h> +#include <mach/at91_pmc.h> +#include <mach/cpu.h> +#include <mach/board.h> + +#include "soc.h" +#include "generic.h" +#include "clock.h" +#include "sam9_smc.h" + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioAB_clk = { + .name = "pioAB_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_PIOAB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioCD_clk = { + .name = "pioCD_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_PIOCD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk smd_clk = { + .name = "smd_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SMD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART2, + .type = CLK_TYPE_PERIPHERAL, +}; +/* USART3 clock - Only for sam9g25/sam9x25 */ +static struct clk usart3_clk = { + .name = "usart3_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi0_clk = { + .name = "twi0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TWI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi1_clk = { + .name = "twi1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TWI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi2_clk = { + .name = "twi2_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TWI2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_MCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uart0_clk = { + .name = "uart0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UART0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uart1_clk = { + .name = "uart1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UART1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb0_clk = { + .name = "tcb0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pwm_clk = { + .name = "pwm_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_PWM, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma0_clk = { + .name = "dma0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_DMA0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma1_clk = { + .name = "dma1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_DMA1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uhphs_clk = { + .name = "uhphs", + .pmc_mask = 1 << AT91SAM9X5_ID_UHPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */ +static struct clk macb0_clk = { + .name = "pclk", + .pmc_mask = 1 << AT91SAM9X5_ID_EMAC0, + .type = CLK_TYPE_PERIPHERAL, +}; +/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */ +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* isi clock - Only for sam9g25 */ +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +/* emac1 clock - Only for sam9x25 */ +static struct clk macb1_clk = { + .name = "pclk", + .pmc_mask = 1 << AT91SAM9X5_ID_EMAC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc_clk = { + .name = "ssc_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SSC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* can0 clock - Only for sam9x35 */ +static struct clk can0_clk = { + .name = "can0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_CAN0, + .type = CLK_TYPE_PERIPHERAL, +}; +/* can1 clock - Only for sam9x35 */ +static struct clk can1_clk = { + .name = "can1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_CAN1, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioAB_clk, + &pioCD_clk, + &smd_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &twi0_clk, + &twi1_clk, + &twi2_clk, + &mmc0_clk, + &spi0_clk, + &spi1_clk, + &uart0_clk, + &uart1_clk, + &tcb0_clk, + &pwm_clk, + &adc_clk, + &dma0_clk, + &dma1_clk, + &uhphs_clk, + &udphs_clk, + &mmc1_clk, + &ssc_clk, + // irq0 +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_ID("pioA", &pioAB_clk), + CLKDEV_CON_ID("pioB", &pioAB_clk), + CLKDEV_CON_ID("pioC", &pioCD_clk), + CLKDEV_CON_ID("pioD", &pioCD_clk), + /* additional fake clock for macb_hclk */ + CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), + CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), + CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), +}; + +/* + * The two programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; + +static void __init at91sam9x5_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + + if (cpu_is_at91sam9g25() + || cpu_is_at91sam9x25()) + clk_register(&usart3_clk); + + if (cpu_is_at91sam9g25() + || cpu_is_at91sam9x25() + || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35()) + clk_register(&macb0_clk); + + if (cpu_is_at91sam9g15() + || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35()) + clk_register(&lcdc_clk); + + if (cpu_is_at91sam9g25()) + clk_register(&isi_clk); + + if (cpu_is_at91sam9x25()) + clk_register(&macb1_clk); + + if (cpu_is_at91sam9x25() + || cpu_is_at91sam9x35()) { + clk_register(&can0_clk); + clk_register(&can1_clk); + } + + clk_register(&pck0); + clk_register(&pck1); +} + +/* -------------------------------------------------------------------- + * AT91SAM9x5 processor initialization + * -------------------------------------------------------------------- */ + +static void __init at91sam9x5_map_io(void) +{ + at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); +} + +void __init at91sam9x5_initialize(void) +{ + at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); + + /* Register GPIO subsystem (using DT) */ + at91_gpio_init(NULL, 0); +} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 1, /* Parallel IO Controller A and B */ + 1, /* Parallel IO Controller C and D */ + 4, /* Soft Modem */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 5, /* USART 3 */ + 6, /* Two-Wire Interface 0 */ + 6, /* Two-Wire Interface 1 */ + 6, /* Two-Wire Interface 2 */ + 0, /* Multimedia Card Interface 0 */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 5, /* UART 0 */ + 5, /* UART 1 */ + 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ + 0, /* Pulse Width Modulation Controller */ + 0, /* ADC Controller */ + 0, /* DMA Controller 0 */ + 0, /* DMA Controller 1 */ + 2, /* USB Host High Speed port */ + 2, /* USB Device High speed port */ + 3, /* Ethernet MAC 0 */ + 3, /* LDC Controller or Image Sensor Interface */ + 0, /* Multimedia Card Interface 1 */ + 3, /* Ethernet MAC 1 */ + 4, /* Synchronous Serial Interface */ + 4, /* CAN Controller 0 */ + 4, /* CAN Controller 1 */ + 0, /* Advanced Interrupt Controller (IRQ0) */ +}; + +struct at91_init_soc __initdata at91sam9x5_soc = { + .map_io = at91sam9x5_map_io, + .default_irq_priority = at91sam9x5_default_irq_priority, + .register_clocks = at91sam9x5_register_clocks, + .init = at91sam9x5_initialize, +}; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 56ba3bd035ae..5400a1d65035 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <asm/proc-fns.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> #include <mach/at91_st.h> @@ -37,8 +38,19 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } +static void at91x40_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + __raw_writel(AT91_PS_CR_CPU, AT91_PS_CR); + cpu_do_idle(); +} + void __init at91x40_initialize(unsigned long main_clock) { + arm_pm_idle = at91x40_idle; at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) | (1 << AT91X40_ID_IRQ2); } diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index dfff2895f4b2..6ca680a1d5d1 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -28,6 +28,12 @@ #include <asm/mach/time.h> #include <mach/at91_tc.h> +#define at91_tc_read(field) \ + __raw_readl(AT91_TC + field) + +#define at91_tc_write(field, value) \ + __raw_writel(value, AT91_TC + field); + /* * 3 counter/timer units present. */ @@ -37,12 +43,12 @@ static unsigned long at91x40_gettimeoffset(void) { - return (at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128)); + return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128)); } static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id) { - at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_SR); + at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR); timer_tick(); return IRQ_HANDLED; } @@ -57,20 +63,20 @@ void __init at91x40_timer_init(void) { unsigned int v; - at91_sys_write(AT91_TC + AT91_TC_BCR, 0); - v = at91_sys_read(AT91_TC + AT91_TC_BMR); + at91_tc_write(AT91_TC_BCR, 0); + v = at91_tc_read(AT91_TC_BMR); v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE; - at91_sys_write(AT91_TC + AT91_TC_BMR, v); + at91_tc_write(AT91_TC_BMR, v); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG)); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4)); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG)); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4)); setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN)); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN)); } struct sys_timer at91x40_timer = { diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 3bb40694b02d..161efbaa1029 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, + .ecc_mode = NAND_ECC_SOFT, .parts = afeb9260_nand_partition, .num_parts = ARRAY_SIZE(afeb9260_nand_partition), .det_pin = -EINVAL, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 8510e9e54988..c6d44ee0c77e 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -140,6 +140,7 @@ static struct atmel_nand_data __initdata cam60_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA9, .enable_pin = AT91_PIN_PA7, + .ecc_mode = NAND_ECC_SOFT, .parts = cam60_nand_partition, .num_parts = ARRAY_SIZE(cam60_nand_partition), }; diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c deleted file mode 100644 index ac3de4f7c31d..000000000000 --- a/arch/arm/mach-at91/board-cap9adk.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-cap9adk.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/fb.h> -#include <linux/mtd/physmap.h> - -#include <video/atmel_lcdc.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/board.h> -#include <mach/at91cap9_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init cap9adk_init_early(void) -{ - /* Initialize processor: 12 MHz crystal */ - at91_initialize(12000000); - - /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ - at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); - /* ... POWER LED always on */ - at91_set_gpio_output(AT91_PIN_PC29, 1); - - /* Setup the serial ports and console */ - at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */ - at91_set_serial_console(0); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata cap9adk_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB HS Device port - */ -static struct usba_platform_data __initdata cap9adk_usba_udc_data = { - .vbus_pin = AT91_PIN_PB31, -}; - -/* - * ADS7846 Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - .x_plate_ohms = 450, - .y_plate_ohms = 250, - .pressure_max = 15000, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init cap9adk_add_device_ts(void) -{ - at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */ - at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */ -} -#else -static void __init cap9adk_add_device_ts(void) {} -#endif - - -/* - * SPI devices. - */ -static struct spi_board_info cap9adk_spi_devices[] = { -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ - .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = AT91_PIN_PC4, - }, -#endif -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata cap9adk_mmc_data = { - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata cap9adk_macb_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata cap9adk_nand_partitions[] = { - { - .name = "NAND partition", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata cap9adk_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = -EINVAL, - .enable_pin = AT91_PIN_PD15, - .parts = cap9adk_nand_partitions, - .num_parts = ARRAY_SIZE(cap9adk_nand_partitions), -}; - -static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 2, - .ncs_write_setup = 1, - .nwe_setup = 2, - - .ncs_read_pulse = 6, - .nrd_pulse = 4, - .ncs_write_pulse = 6, - .nwe_pulse = 4, - - .read_cycle = 8, - .write_cycle = 8, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 1, -}; - -static void __init cap9adk_add_device_nand(void) -{ - unsigned long csa; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - cap9adk_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (cap9adk_nand_data.bus_width_16) - cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &cap9adk_nand_smc_config); - - at91_add_device_nand(&cap9adk_nand_data); -} - - -/* - * NOR flash - */ -static struct mtd_partition cap9adk_nor_partitions[] = { - { - .name = "NOR partition", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data cap9adk_nor_data = { - .width = 2, - .parts = cap9adk_nor_partitions, - .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions), -}; - -#define NOR_BASE AT91_CHIPSELECT_0 -#define NOR_SIZE SZ_8M - -static struct resource nor_flash_resources[] = { - { - .start = NOR_BASE, - .end = NOR_BASE + NOR_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cap9adk_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &cap9adk_nor_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata cap9adk_nor_smc_config = { - .ncs_read_setup = 2, - .nrd_setup = 4, - .ncs_write_setup = 2, - .nwe_setup = 4, - - .ncs_read_pulse = 10, - .nrd_pulse = 8, - .ncs_write_pulse = 10, - .nwe_pulse = 8, - - .read_cycle = 16, - .write_cycle = 16, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16, - .tdf_cycles = 1, -}; - -static __init void cap9adk_add_device_nor(void) -{ - unsigned long csa; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, 0, &cap9adk_nor_smc_config); - - platform_device_register(&cap9adk_nor_flash); -} - - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(4965), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D70VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_power_control(int on) -{ - if (on) - at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ - else - at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ -} - -/* Driver datas */ -static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = { - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, - .guard_time = 1, -}; - -#else -static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; -#endif - - -/* - * AC97 - */ -static struct ac97c_platform_data cap9adk_ac97_data = { - .reset_pin = -EINVAL, -}; - - -static void __init cap9adk_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&cap9adk_usbh_data); - /* USB HS */ - at91_add_device_usba(&cap9adk_usba_udc_data); - /* SPI */ - at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); - /* Touchscreen */ - cap9adk_add_device_ts(); - /* MMC */ - at91_add_device_mmc(1, &cap9adk_mmc_data); - /* Ethernet */ - at91_add_device_eth(&cap9adk_macb_data); - /* NAND */ - cap9adk_add_device_nand(); - /* NOR Flash */ - cap9adk_add_device_nor(); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* LCD Controller */ - at91_add_device_lcdc(&cap9adk_lcdc_data); - /* AC97 */ - at91_add_device_ac97(&cap9adk_ac97_data); -} - -MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") - /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ - .timer = &at91sam926x_timer, - .map_io = at91_map_io, - .init_early = cap9adk_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cap9adk_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 9ab3d1ea326d..5f3680e7c883 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -43,6 +43,7 @@ #include <mach/board.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> +#include <mach/at91_matrix.h> #include "sam9_smc.h" #include "generic.h" @@ -116,6 +117,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = { .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, }; #ifdef CONFIG_MACH_CPU9260 @@ -238,8 +240,8 @@ static __init void cpu9krea_add_device_nor(void) { unsigned long csa; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); /* configure chip-select 0 (NOR) */ sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config); diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 368e1427ad99..e094cc81fe25 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -38,6 +38,7 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index bb6b434ec0c1..c18d4d307801 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -15,14 +15,11 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/gpio.h> -#include <linux/irqdomain.h> +#include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <mach/hardware.h> #include <mach/board.h> -#include <mach/system_rev.h> -#include <mach/at91sam9_smc.h> #include <asm/setup.h> #include <asm/irq.h> @@ -30,85 +27,30 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include "sam9_smc.h" #include "generic.h" -static void __init ek_init_early(void) -{ - /* Initialize processor: 12.000 MHz crystal */ - at91_initialize(12000000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -/* det_pin is not connected */ -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC8, - .enable_pin = AT91_PIN_PC14, -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, +static const struct of_device_id irq_of_match[] __initconst = { - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 3, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - -static const struct of_device_id aic_of_match[] __initconst = { - { .compatible = "atmel,at91rm9200-aic", }, - {}, + { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, + { .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup }, + { .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup }, + { /*sentinel*/ } }; static void __init at91_dt_init_irq(void) { - irq_domain_generate_simple(aic_of_match, 0xfffff000, 0); - at91_init_irq_default(); + of_irq_init(irq_of_match); } static void __init at91_dt_device_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - /* NAND */ - ek_add_device_nand(); } static const char *at91_dt_board_compat[] __initdata = { "atmel,at91sam9m10g45ek", + "atmel,at91sam9x5ek", "calao,usb-a9g20", NULL }; @@ -117,7 +59,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, - .init_early = ek_init_early, + .init_early = at91_dt_initialize, .init_irq = at91_dt_init_irq, .init_machine = at91_dt_device_init, .dt_compat = at91_dt_board_compat, diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 07ef35b0ec2c..f23aabef8551 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -26,6 +26,7 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include <mach/cpu.h> #include "generic.h" @@ -110,7 +111,7 @@ static void __init eco920_board_init(void) at91_add_device_mmc(0, &eco920_mmc_data); platform_device_register(&eco920_flash); - at91_sys_write(AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) + at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) | AT91_SMC_RWSETUP_(1) | AT91_SMC_DBW_8 | AT91_SMC_WSEN @@ -122,7 +123,7 @@ static void __init eco920_board_init(void) at91_set_deglitch(AT91_PIN_PA23, 1); /* Initialization of the Static Memory Controller for Chip Select 3 */ - at91_sys_write(AT91_SMC_CSR(3), + at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_DBW_16 | /* 16 bit */ AT91_SMC_WSEN | AT91_SMC_NWS_(5) | /* wait states */ diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index eec02cd57ced..1815152001f7 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-at91/board-flexibity.c * - * Copyright (C) 2010 Flexibity + * Copyright (C) 2010-2011 Flexibity * Copyright (C) 2005 SAN People * Copyright (C) 2006 Atmel * @@ -62,6 +62,13 @@ static struct at91_udc_data __initdata flexibity_udc_data = { .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; +/* I2C devices */ +static struct i2c_board_info __initdata flexibity_i2c_devices[] = { + { + I2C_BOARD_INFO("ds1307", 0x68), + }, +}; + /* SPI devices */ static struct spi_board_info flexibity_spi_devices[] = { { /* DataFlash chip */ @@ -141,6 +148,9 @@ static void __init flexibity_board_init(void) at91_add_device_usbh(&flexibity_usbh_data); /* USB Device */ at91_add_device_udc(&flexibity_udc_data); + /* I2C */ + at91_add_device_i2c(flexibity_i2c_devices, + ARRAY_SIZE(flexibity_i2c_devices)); /* SPI */ at91_add_device_spi(flexibity_spi_devices, ARRAY_SIZE(flexibity_spi_devices)); diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index d75a4a2ad9c2..59b92aab9bcf 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -38,6 +38,7 @@ #include <mach/board.h> #include <mach/cpu.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" @@ -107,6 +108,7 @@ static struct atmel_nand_data __initdata kb9202_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC29, .enable_pin = AT91_PIN_PC28, + .ecc_mode = NAND_ECC_SOFT, .parts = kb9202_nand_partition, .num_parts = ARRAY_SIZE(kb9202_nand_partition), }; diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 3f8617c0e04e..57d5f6a4726a 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -190,6 +190,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = { .rdy_pin = AT91_PIN_PB19, .rdy_pin_active_low = 1, .enable_pin = AT91_PIN_PD15, + .ecc_mode = NAND_ECC_SOFT, .parts = neocore926_nand_partition, .num_parts = ARRAY_SIZE(neocore926_nand_partition), .det_pin = -EINVAL, diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ab024fa11d5c..59e35dd14863 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -39,6 +39,7 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index e029d220cb84..b6ed5ed7081a 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -138,6 +138,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 782f37946af5..01332aa538b2 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" @@ -149,6 +150,8 @@ static struct atmel_nand_data __initdata dk_nand_data = { .det_pin = AT91_PIN_PB1, .rdy_pin = AT91_PIN_PC2, .enable_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = dk_nand_partition, .num_parts = ARRAY_SIZE(dk_nand_partition), }; diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index ef7c12a92246..11cbaa8946fe 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 84bce587735f..e8b116b6cba6 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -139,6 +139,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index be8233bcabdc..d5aec55b0eb4 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -181,6 +181,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 40895072a1a7..c3f994462864 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 29f66052fe63..66f0ddf4b2ae 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 843d6286c6f4..8923ec9f5831 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -166,6 +166,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ea0d1b9c2b7b..e1bea73e6b30 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -24,11 +24,13 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/leds.h> -#include <linux/clk.h> #include <linux/atmel-mci.h> +#include <linux/delay.h> #include <mach/hardware.h> #include <video/atmel_lcdc.h> +#include <media/soc_camera.h> +#include <media/atmel-isi.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -146,6 +148,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; @@ -185,6 +189,71 @@ static void __init ek_add_device_nand(void) /* + * ISI + */ +static struct isi_platform_data __initdata isi_data = { + .frate = ISI_CFG1_FRATE_CAPTURE_ALL, + /* to use codec and preview path simultaneously */ + .full_mode = 1, + .data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10, + /* ISI_MCK is provided by programmable clock or external clock */ + .mck_hz = 25000000, +}; + + +/* + * soc-camera OV2640 + */ +#if defined(CONFIG_SOC_CAMERA_OV2640) || \ + defined(CONFIG_SOC_CAMERA_OV2640_MODULE) +static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link) +{ + /* ISI board for ek using default 8-bits connection */ + return SOCAM_DATAWIDTH_8; +} + +static int i2c_camera_power(struct device *dev, int on) +{ + /* enable or disable the camera */ + pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); + at91_set_gpio_output(AT91_PIN_PD13, !on); + + if (!on) + goto out; + + /* If enabled, give a reset impulse */ + at91_set_gpio_output(AT91_PIN_PD12, 0); + msleep(20); + at91_set_gpio_output(AT91_PIN_PD12, 1); + msleep(100); + +out: + return 0; +} + +static struct i2c_board_info i2c_camera = { + I2C_BOARD_INFO("ov2640", 0x30), +}; + +static struct soc_camera_link iclink_ov2640 = { + .bus_id = 0, + .board_info = &i2c_camera, + .i2c_adapter_id = 0, + .power = i2c_camera_power, + .query_bus_param = isi_camera_query_bus_param, +}; + +static struct platform_device isi_ov2640 = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink_ov2640, + }, +}; +#endif + + +/* * LCD Controller */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) @@ -377,7 +446,12 @@ static struct gpio_led ek_pwm_led[] = { #endif }; - +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_SOC_CAMERA_OV2640) || \ + defined(CONFIG_SOC_CAMERA_OV2640_MODULE) + &isi_ov2640, +#endif +}; static void __init ek_board_init(void) { @@ -399,6 +473,8 @@ static void __init ek_board_init(void) ek_add_device_nand(); /* I2C */ at91_add_device_i2c(0, NULL, 0); + /* ISI, using programmable clock as ISI_MCK */ + at91_add_device_isi(&isi_data, true); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); /* Touch Screen */ @@ -410,6 +486,8 @@ static void __init ek_board_init(void) /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led)); + /* Other platform devices */ + platform_add_devices(devices, ARRAY_SIZE(devices)); } MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index c1366d0032bf..b109ce2ba864 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -94,6 +94,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PD17, .enable_pin = AT91_PIN_PB6, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 4770db08e5a6..ebc9d01ce742 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -110,6 +110,7 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = { .bus_width_16 = 0, .enable_pin = -EINVAL, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, }; static struct sam9_smc_config __initdata snapper9260_nand_smc_config = { @@ -145,11 +146,11 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = { /* Audio codec */ I2C_BOARD_INFO("tlv320aic23", 0x1a), }, - { +}; + +static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = { /* RTC */ I2C_BOARD_INFO("isl1208", 0x6f), - .irq = gpio_to_irq(AT91_PIN_PA31), - }, }; static void __init snapper9260_add_device_nand(void) @@ -163,6 +164,10 @@ static void __init snapper9260_board_init(void) { at91_add_device_i2c(snapper9260_i2c_devices, ARRAY_SIZE(snapper9260_i2c_devices)); + + snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31); + i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1); + at91_add_device_serial(); at91_add_device_usbh(&snapper9260_usbh_data); at91_add_device_udc(&snapper9260_udc_data); diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 72eb3b4d9ab6..7640049410a0 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -86,6 +86,7 @@ static struct atmel_nand_data __initdata nand_data = { .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, }; static struct sam9_smc_config __initdata nand_smc_config = { diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 26c36fc2d1e5..b7483a3d0980 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -198,6 +198,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index bbd553e1cd93..38dd279d30b2 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include <mach/cpu.h> #include "generic.h" @@ -181,6 +182,7 @@ static struct atmel_nand_data __initdata yl9200_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */ .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */ + .ecc_mode = NAND_ECC_SOFT, .parts = yl9200_nand_partition, .num_parts = ARRAY_SIZE(yl9200_nand_partition), }; @@ -393,7 +395,7 @@ static void yl9200_init_video(void) at91_set_A_periph(AT91_PIN_PC6, 0); /* Initialization of the Static Memory Controller for Chip Select 2 */ - at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */ + at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */ | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */ | AT91_SMC_TDF_(0x100) /* float time */ ); diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 61873f3aa92d..a0f4d7424cdc 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -23,14 +23,18 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/of_address.h> #include <mach/hardware.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> +#include <asm/proc-fns.h> + #include "clock.h" #include "generic.h" +void __iomem *at91_pmc_base; /* * There's a lot more which can be done with clocks, including cpufreq @@ -47,26 +51,38 @@ /* * Chips have some kind of clocks : group them by functionality */ -#define cpu_has_utmi() ( cpu_is_at91cap9() \ - || cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45()) +#define cpu_has_utmi() ( cpu_is_at91sam9rl() \ + || cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ - || cpu_is_at91sam9g45()) + || cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45())) + || cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5())) -#define cpu_has_upll() (cpu_is_at91sam9g45()) +#define cpu_has_upll() (cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) /* USB host HS & FS */ #define cpu_has_uhp() (!cpu_is_at91sam9rl()) /* USB device FS only */ #define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45())) + || cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5())) + +#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) + +#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) + +#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5()) static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); @@ -111,11 +127,11 @@ static void pllb_mode(struct clk *clk, int is_on) value = 0; // REVISIT: Add work-around for AT91RM9200 Errata #26 ? - at91_sys_write(AT91_CKGR_PLLBR, value); + at91_pmc_write(AT91_CKGR_PLLBR, value); do { cpu_relax(); - } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on); + } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on); } static struct clk pllb = { @@ -130,31 +146,24 @@ static struct clk pllb = { static void pmc_sys_mode(struct clk *clk, int is_on) { if (is_on) - at91_sys_write(AT91_PMC_SCER, clk->pmc_mask); + at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask); else - at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask); + at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask); } static void pmc_uckr_mode(struct clk *clk, int is_on) { - unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR); - - if (cpu_is_at91sam9g45()) { - if (is_on) - uckr |= AT91_PMC_BIASEN; - else - uckr &= ~AT91_PMC_BIASEN; - } + unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR); if (is_on) { is_on = AT91_PMC_LOCKU; - at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask); + at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask); } else - at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask)); + at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask)); do { cpu_relax(); - } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on); + } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on); } /* USB function clocks (PLLB must be 48 MHz) */ @@ -190,9 +199,9 @@ struct clk mck = { static void pmc_periph_mode(struct clk *clk, int is_on) { if (is_on) - at91_sys_write(AT91_PMC_PCER, clk->pmc_mask); + at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask); else - at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask); + at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask); } static struct clk __init *at91_css_to_clk(unsigned long css) @@ -210,11 +219,24 @@ static struct clk __init *at91_css_to_clk(unsigned long css) return &utmi_clk; else if (cpu_has_pllb()) return &pllb; + break; + /* alternate PMC: can use master clock */ + case AT91_PMC_CSS_MASTER: + return &mck; } return NULL; } +static int pmc_prescaler_divider(u32 reg) +{ + if (cpu_has_alt_prescaler()) { + return 1 << ((reg & AT91_PMC_ALT_PRES) >> PMC_ALT_PRES_OFFSET); + } else { + return 1 << ((reg & AT91_PMC_PRES) >> PMC_PRES_OFFSET); + } +} + static void __clk_enable(struct clk *clk) { if (clk->parent) @@ -316,12 +338,22 @@ int clk_set_rate(struct clk *clk, unsigned long rate) { unsigned long flags; unsigned prescale; + unsigned long prescale_offset, css_mask; unsigned long actual; if (!clk_is_programmable(clk)) return -EINVAL; if (clk->users) return -EBUSY; + + if (cpu_has_alt_prescaler()) { + prescale_offset = PMC_ALT_PRES_OFFSET; + css_mask = AT91_PMC_ALT_PCKR_CSS; + } else { + prescale_offset = PMC_PRES_OFFSET; + css_mask = AT91_PMC_CSS; + } + spin_lock_irqsave(&clk_lock, flags); actual = clk->parent->rate_hz; @@ -329,10 +361,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (actual && actual <= rate) { u32 pckr; - pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - pckr &= AT91_PMC_CSS; /* clock selection */ - pckr |= prescale << 2; - at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); + pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id)); + pckr &= css_mask; /* keep clock selection */ + pckr |= prescale << prescale_offset; + at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr); clk->rate_hz = actual; break; } @@ -366,7 +398,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) clk->rate_hz = parent->rate_hz; clk->parent = parent; - at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id); + at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id); spin_unlock_irqrestore(&clk_lock, flags); return 0; @@ -378,11 +410,17 @@ static void __init init_programmable_clock(struct clk *clk) { struct clk *parent; u32 pckr; + unsigned int css_mask; + + if (cpu_has_alt_prescaler()) + css_mask = AT91_PMC_ALT_PCKR_CSS; + else + css_mask = AT91_PMC_CSS; - pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - parent = at91_css_to_clk(pckr & AT91_PMC_CSS); + pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id)); + parent = at91_css_to_clk(pckr & css_mask); clk->parent = parent; - clk->rate_hz = parent->rate_hz / (1 << ((pckr & AT91_PMC_PRES) >> 2)); + clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr); } #endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ @@ -396,19 +434,24 @@ static int at91_clk_show(struct seq_file *s, void *unused) u32 scsr, pcsr, uckr = 0, sr; struct clk *clk; - seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR)); - seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR)); - seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); - seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); - seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); + scsr = at91_pmc_read(AT91_PMC_SCSR); + pcsr = at91_pmc_read(AT91_PMC_PCSR); + sr = at91_pmc_read(AT91_PMC_SR); + seq_printf(s, "SCSR = %8x\n", scsr); + seq_printf(s, "PCSR = %8x\n", pcsr); + seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR)); + seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR)); + seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR)); if (cpu_has_pllb()) - seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR)); - if (cpu_has_utmi()) - seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR)); - seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); + seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR)); + if (cpu_has_utmi()) { + uckr = at91_pmc_read(AT91_CKGR_UCKR); + seq_printf(s, "UCKR = %8x\n", uckr); + } + seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR)); if (cpu_has_upll()) - seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB)); - seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); + seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB)); + seq_printf(s, "SR = %8x\n", sr); seq_printf(s, "\n"); @@ -596,16 +639,14 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) if (cpu_is_at91rm9200()) { uhpck.pmc_mask = AT91RM9200_PMC_UHP; udpck.pmc_mask = AT91RM9200_PMC_UDP; - at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); + at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91cap9()) { - uhpck.pmc_mask = AT91CAP9_PMC_UHP; } - at91_sys_write(AT91_CKGR_PLLBR, 0); + at91_pmc_write(AT91_CKGR_PLLBR, 0); udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); @@ -622,16 +663,16 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) /* Setup divider by 10 to reach 48 MHz */ usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV; - at91_sys_write(AT91_PMC_USB, usbr); + at91_pmc_write(AT91_PMC_USB, usbr); /* Now set uhpck values */ uhpck.parent = &utmi_clk; uhpck.pmc_mask = AT91SAM926x_PMC_UHP; uhpck.rate_hz = utmi_clk.rate_hz; - uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); + uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); } -int __init at91_clock_init(unsigned long main_clock) +static int __init at91_pmc_init(unsigned long main_clock) { unsigned tmp, freq, mckr; int i; @@ -645,14 +686,14 @@ int __init at91_clock_init(unsigned long main_clock) */ if (!main_clock) { do { - tmp = at91_sys_read(AT91_CKGR_MCFR); + tmp = at91_pmc_read(AT91_CKGR_MCFR); } while (!(tmp & AT91_PMC_MAINRDY)); main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16); } main_clk.rate_hz = main_clock; /* report if PLLA is more than mildly overclocked */ - plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR)); + plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR)); if (cpu_has_300M_plla()) { if (plla.rate_hz > 300000000) pll_overclock = true; @@ -666,8 +707,8 @@ int __init at91_clock_init(unsigned long main_clock) if (pll_overclock) pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); - if (cpu_is_at91sam9g45()) { - mckr = at91_sys_read(AT91_PMC_MCKR); + if (cpu_has_plladiv2()) { + mckr = at91_pmc_read(AT91_PMC_MCKR); plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */ } @@ -688,6 +729,10 @@ int __init at91_clock_init(unsigned long main_clock) * (obtain the USB High Speed 480 MHz when input is 12 MHz) */ utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz; + + /* UTMI bias and PLL are managed at the same time */ + if (cpu_has_upll()) + utmi_clk.pmc_mask |= AT91_PMC_BIASEN; } /* @@ -703,10 +748,10 @@ int __init at91_clock_init(unsigned long main_clock) * MCK and CPU derive from one of those primary clocks. * For now, assume this parentage won't change. */ - mckr = at91_sys_read(AT91_PMC_MCKR); + mckr = at91_pmc_read(AT91_PMC_MCKR); mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); freq = mck.parent->rate_hz; - freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */ + freq /= pmc_prescaler_divider(mckr); /* prescale */ if (cpu_is_at91rm9200()) { mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ } else if (cpu_is_at91sam9g20()) { @@ -714,13 +759,19 @@ int __init at91_clock_init(unsigned long main_clock) freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ if (mckr & AT91_PMC_PDIV) freq /= 2; /* processor clock division */ - } else if (cpu_is_at91sam9g45()) { + } else if (cpu_has_mdiv3()) { mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ? freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ } else { mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ } + if (cpu_has_alt_prescaler()) { + /* Programmable clocks can use MCK */ + mck.type |= CLK_TYPE_PRIMARY; + mck.id = 4; + } + /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) at91_clk_add(standard_pmc_clocks[i]); @@ -748,6 +799,55 @@ int __init at91_clock_init(unsigned long main_clock) return 0; } +#if defined(CONFIG_OF) +static struct of_device_id pmc_ids[] = { + { .compatible = "atmel,at91rm9200-pmc" }, + { /*sentinel*/ } +}; + +static struct of_device_id osc_ids[] = { + { .compatible = "atmel,osc" }, + { /*sentinel*/ } +}; + +int __init at91_dt_clock_init(void) +{ + struct device_node *np; + u32 main_clock = 0; + + np = of_find_matching_node(NULL, pmc_ids); + if (!np) + panic("unable to find compatible pmc node in dtb\n"); + + at91_pmc_base = of_iomap(np, 0); + if (!at91_pmc_base) + panic("unable to map pmc cpu registers\n"); + + of_node_put(np); + + /* retrieve the freqency of fixed clocks from device tree */ + np = of_find_matching_node(NULL, osc_ids); + if (np) { + u32 rate; + if (!of_property_read_u32(np, "clock-frequency", &rate)) + main_clock = rate; + } + + of_node_put(np); + + return at91_pmc_init(main_clock); +} +#endif + +int __init at91_clock_init(unsigned long main_clock) +{ + at91_pmc_base = ioremap(AT91_PMC, 256); + if (!at91_pmc_base) + panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC); + + return at91_pmc_init(main_clock); +} + /* * Several unused clocks may be active. Turn them off. */ @@ -770,9 +870,15 @@ static int __init at91_clock_reset(void) pr_debug("Clocks: disable unused %s\n", clk->name); } - at91_sys_write(AT91_PMC_PCDR, pcdr); - at91_sys_write(AT91_PMC_SCDR, scdr); + at91_pmc_write(AT91_PMC_PCDR, pcdr); + at91_pmc_write(AT91_PMC_SCDR, scdr); return 0; } late_initcall(at91_clock_reset); + +void at91sam9_idle(void) +{ + at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index a851e6c98421..555d956b3a57 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -39,20 +39,15 @@ static int at91_enter_idle(struct cpuidle_device *dev, { struct timeval before, after; int idle_time; - u32 saved_lpr; local_irq_disable(); do_gettimeofday(&before); if (index == 0) /* Wait for interrupt state */ cpu_do_idle(); - else if (index == 1) { - asm("b 1f; .align 5; 1:"); - asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ - saved_lpr = sdram_selfrefresh_enable(); - cpu_do_idle(); - sdram_selfrefresh_disable(saved_lpr); - } + else if (index == 1) + at91_standby(); + do_gettimeofday(&after); local_irq_enable(); idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 594133451c0c..dd9b346c451d 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -9,6 +9,7 @@ */ #include <linux/clkdev.h> +#include <linux/of.h> /* Map io */ extern void __init at91_map_io(void); @@ -19,15 +20,20 @@ extern void __init at91_init_sram(int bank, unsigned long base, extern void __init at91rm9200_set_type(int type); extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); +extern void __init at91_dt_initialize(void); /* Interrupts */ extern void __init at91_init_irq_default(void); extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); +extern int __init at91_aic_of_init(struct device_node *node, + struct device_node *parent); + /* Timer */ struct sys_timer; +extern void at91rm9200_ioremap_st(u32 addr); extern struct sys_timer at91rm9200_timer; extern void at91sam926x_ioremap_pit(u32 addr); extern struct sys_timer at91sam926x_timer; @@ -45,9 +51,9 @@ extern void __init at91sam9261_set_console_clock(int id); extern void __init at91sam9263_set_console_clock(int id); extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); -extern void __init at91cap9_set_console_clock(int id); #ifdef CONFIG_AT91_PMC_UNIT extern int __init at91_clock_init(unsigned long main_clock); +extern int __init at91_dt_clock_init(void); #else static int inline at91_clock_init(unsigned long main_clock) { return 0; } #endif @@ -57,6 +63,9 @@ struct device; extern void at91_irq_suspend(void); extern void at91_irq_resume(void); +/* idle */ +extern void at91sam9_idle(void); + /* reset */ extern void at91_ioremap_rstc(u32 base_addr); extern void at91sam9_alt_restart(char, const char *); @@ -65,6 +74,12 @@ extern void at91sam9g45_restart(char, const char *); /* shutdown */ extern void at91_ioremap_shdwc(u32 base_addr); +/* Matrix */ +extern void at91_ioremap_matrix(u32 base_addr); + +/* Ram Controler */ +extern void at91_ioremap_ramc(int id, u32 addr, u32 size); + /* GPIO */ #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ #define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */ @@ -75,5 +90,7 @@ struct at91_gpio_bank { }; extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks); extern void __init at91_gpio_irq_setup(void); +extern int __init at91_gpio_of_irq_setup(struct device_node *node, + struct device_node *parent); extern int at91_extern_irq; diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 74d6783eeabb..325837a264c9 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -11,6 +11,7 @@ #include <linux/clk.h> #include <linux/errno.h> +#include <linux/device.h> #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -20,6 +21,10 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/irqdomain.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> #include <mach/hardware.h> #include <mach/at91_pio.h> @@ -29,9 +34,12 @@ struct at91_gpio_chip { struct gpio_chip chip; struct at91_gpio_chip *next; /* Bank sharing same clock */ - int id; /* ID of register bank */ - void __iomem *regbase; /* Base of register bank */ + int pioc_hwirq; /* PIO bank interrupt identifier on AIC */ + int pioc_virq; /* PIO bank Linux virtual interrupt */ + int pioc_idx; /* PIO bank index */ + void __iomem *regbase; /* PIO bank virtual address */ struct clk *clock; /* associated clock */ + struct irq_domain *domain; /* associated irq domain */ }; #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) @@ -43,8 +51,9 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset); +static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); -#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \ +#define AT91_GPIO_CHIP(name, nr_gpio) \ { \ .chip = { \ .label = name, \ @@ -53,20 +62,28 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip, .get = at91_gpiolib_get, \ .set = at91_gpiolib_set, \ .dbg_show = at91_gpiolib_dbg_show, \ - .base = base_gpio, \ + .to_irq = at91_gpiolib_to_irq, \ .ngpio = nr_gpio, \ }, \ } static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA", 0x00, 32), - AT91_GPIO_CHIP("pioB", 0x20, 32), - AT91_GPIO_CHIP("pioC", 0x40, 32), - AT91_GPIO_CHIP("pioD", 0x60, 32), - AT91_GPIO_CHIP("pioE", 0x80, 32), + AT91_GPIO_CHIP("pioA", 32), + AT91_GPIO_CHIP("pioB", 32), + AT91_GPIO_CHIP("pioC", 32), + AT91_GPIO_CHIP("pioD", 32), + AT91_GPIO_CHIP("pioE", 32), }; static int gpio_banks; +static unsigned long at91_gpio_caps; + +/* All PIO controllers support PIO3 features */ +#define AT91_GPIO_CAP_PIO3 (1 << 0) + +#define has_pio3() (at91_gpio_caps & AT91_GPIO_CAP_PIO3) + +/*--------------------------------------------------------------------------*/ static inline void __iomem *pin_to_controller(unsigned pin) { @@ -83,6 +100,25 @@ static inline unsigned pin_to_mask(unsigned pin) } +static char peripheral_function(void __iomem *pio, unsigned mask) +{ + char ret = 'X'; + u8 select; + + if (pio) { + if (has_pio3()) { + select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask); + select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1); + ret = 'A' + select; + } else { + ret = __raw_readl(pio + PIO_ABSR) & mask ? + 'B' : 'A'; + } + } + + return ret; +} + /*--------------------------------------------------------------------------*/ /* Not all hardware capabilities are exposed through these calls; they @@ -130,7 +166,14 @@ int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup) __raw_writel(mask, pio + PIO_IDR); __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(mask, pio + PIO_ASR); + if (has_pio3()) { + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, + pio + PIO_ABCDSR1); + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask, + pio + PIO_ABCDSR2); + } else { + __raw_writel(mask, pio + PIO_ASR); + } __raw_writel(mask, pio + PIO_PDR); return 0; } @@ -150,7 +193,14 @@ int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup) __raw_writel(mask, pio + PIO_IDR); __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(mask, pio + PIO_BSR); + if (has_pio3()) { + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, + pio + PIO_ABCDSR1); + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask, + pio + PIO_ABCDSR2); + } else { + __raw_writel(mask, pio + PIO_BSR); + } __raw_writel(mask, pio + PIO_PDR); return 0; } @@ -158,8 +208,50 @@ EXPORT_SYMBOL(at91_set_B_periph); /* - * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and - * configure it for an input. + * mux the pin to the "C" internal peripheral role. + */ +int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1); + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_C_periph); + + +/* + * mux the pin to the "D" internal peripheral role. + */ +int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1); + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_D_periph); + + +/* + * mux the pin to the gpio controller (instead of "A", "B", "C" + * or "D" peripheral), and configure it for an input. */ int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup) { @@ -179,8 +271,8 @@ EXPORT_SYMBOL(at91_set_gpio_input); /* - * mux the pin to the gpio controller (instead of "A" or "B" peripheral), - * and configure it for an output. + * mux the pin to the gpio controller (instead of "A", "B", "C" + * or "D" peripheral), and configure it for an output. */ int __init_or_module at91_set_gpio_output(unsigned pin, int value) { @@ -210,12 +302,37 @@ int __init_or_module at91_set_deglitch(unsigned pin, int is_on) if (!pio) return -EINVAL; + + if (has_pio3() && is_on) + __raw_writel(mask, pio + PIO_IFSCDR); __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); return 0; } EXPORT_SYMBOL(at91_set_deglitch); /* + * enable/disable the debounce filter; + */ +int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + if (is_on) { + __raw_writel(mask, pio + PIO_IFSCER); + __raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR); + __raw_writel(mask, pio + PIO_IFER); + } else { + __raw_writel(mask, pio + PIO_IFDR); + } + return 0; +} +EXPORT_SYMBOL(at91_set_debounce); + +/* * enable/disable the multi-driver; This is only valid for output and * allows the output pin to run as an open collector output. */ @@ -233,6 +350,41 @@ int __init_or_module at91_set_multi_drive(unsigned pin, int is_on) EXPORT_SYMBOL(at91_set_multi_drive); /* + * enable/disable the pull-down. + * If pull-up already enabled while calling the function, we disable it. + */ +int __init_or_module at91_set_pulldown(unsigned pin, int is_on) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + /* Disable pull-up anyway */ + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR)); + return 0; +} +EXPORT_SYMBOL(at91_set_pulldown); + +/* + * disable Schmitt trigger + */ +int __init_or_module at91_disable_schmitt_trig(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + __raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT); + return 0; +} +EXPORT_SYMBOL(at91_disable_schmitt_trig); + +/* * assuming the pin is muxed as a gpio output, set its value. */ int at91_set_gpio_value(unsigned pin, int value) @@ -273,9 +425,9 @@ static u32 backups[MAX_GPIO_BANKS]; static int gpio_irq_set_wake(struct irq_data *d, unsigned state) { - unsigned pin = irq_to_gpio(d->irq); - unsigned mask = pin_to_mask(pin); - unsigned bank = pin / 32; + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + unsigned mask = 1 << d->hwirq; + unsigned bank = at91_gpio->pioc_idx; if (unlikely(bank >= MAX_GPIO_BANKS)) return -EINVAL; @@ -285,7 +437,7 @@ static int gpio_irq_set_wake(struct irq_data *d, unsigned state) else wakeups[bank] &= ~mask; - irq_set_irq_wake(gpio_chip[bank].id, state); + irq_set_irq_wake(at91_gpio->pioc_virq, state); return 0; } @@ -301,9 +453,10 @@ void at91_gpio_suspend(void) __raw_writel(backups[i], pio + PIO_IDR); __raw_writel(wakeups[i], pio + PIO_IER); - if (!wakeups[i]) + if (!wakeups[i]) { + clk_unprepare(gpio_chip[i].clock); clk_disable(gpio_chip[i].clock); - else { + } else { #ifdef CONFIG_PM_DEBUG printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]); #endif @@ -318,8 +471,10 @@ void at91_gpio_resume(void) for (i = 0; i < gpio_banks; i++) { void __iomem *pio = gpio_chip[i].regbase; - if (!wakeups[i]) - clk_enable(gpio_chip[i].clock); + if (!wakeups[i]) { + if (clk_prepare(gpio_chip[i].clock) == 0) + clk_enable(gpio_chip[i].clock); + } __raw_writel(wakeups[i], pio + PIO_IDR); __raw_writel(backups[i], pio + PIO_IER); @@ -335,7 +490,10 @@ void at91_gpio_resume(void) * To use any AT91_PIN_* as an externally triggered IRQ, first call * at91_set_gpio_input() then maybe enable its glitch filter. * Then just request_irq() with the pin ID; it works like any ARM IRQ - * handler, though it always triggers on rising and falling edges. + * handler. + * First implementation always triggers on rising and falling edges + * whereas the newer PIO3 can be additionally configured to trigger on + * level, edge with any polarity. * * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after * configuring them with at91_set_a_periph() or at91_set_b_periph(). @@ -344,9 +502,9 @@ void at91_gpio_resume(void) static void gpio_irq_mask(struct irq_data *d) { - unsigned pin = irq_to_gpio(d->irq); - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << d->hwirq; if (pio) __raw_writel(mask, pio + PIO_IDR); @@ -354,9 +512,9 @@ static void gpio_irq_mask(struct irq_data *d) static void gpio_irq_unmask(struct irq_data *d) { - unsigned pin = irq_to_gpio(d->irq); - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << d->hwirq; if (pio) __raw_writel(mask, pio + PIO_IER); @@ -373,23 +531,66 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) } } +/* Alternate irq type for PIO3 support */ +static int alt_gpio_irq_type(struct irq_data *d, unsigned type) +{ + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << d->hwirq; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + __raw_writel(mask, pio + PIO_ESR); + __raw_writel(mask, pio + PIO_REHLSR); + break; + case IRQ_TYPE_EDGE_FALLING: + __raw_writel(mask, pio + PIO_ESR); + __raw_writel(mask, pio + PIO_FELLSR); + break; + case IRQ_TYPE_LEVEL_LOW: + __raw_writel(mask, pio + PIO_LSR); + __raw_writel(mask, pio + PIO_FELLSR); + break; + case IRQ_TYPE_LEVEL_HIGH: + __raw_writel(mask, pio + PIO_LSR); + __raw_writel(mask, pio + PIO_REHLSR); + break; + case IRQ_TYPE_EDGE_BOTH: + /* + * disable additional interrupt modes: + * fall back to default behavior + */ + __raw_writel(mask, pio + PIO_AIMDR); + return 0; + case IRQ_TYPE_NONE: + default: + pr_warn("AT91: No type for irq %d\n", gpio_to_irq(d->irq)); + return -EINVAL; + } + + /* enable additional interrupt modes */ + __raw_writel(mask, pio + PIO_AIMER); + + return 0; +} + static struct irq_chip gpio_irqchip = { .name = "GPIO", .irq_disable = gpio_irq_mask, .irq_mask = gpio_irq_mask, .irq_unmask = gpio_irq_unmask, - .irq_set_type = gpio_irq_type, + /* .irq_set_type is set dynamically */ .irq_set_wake = gpio_irq_set_wake, }; static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { - unsigned irq_pin; struct irq_data *idata = irq_desc_get_irq_data(desc); struct irq_chip *chip = irq_data_get_irq_chip(idata); struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); void __iomem *pio = at91_gpio->regbase; - u32 isr; + unsigned long isr; + int n; /* temporarily mask (level sensitive) parent IRQ */ chip->irq_ack(idata); @@ -407,13 +608,10 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) continue; } - irq_pin = gpio_to_irq(at91_gpio->chip.base); - - while (isr) { - if (isr & 1) - generic_handle_irq(irq_pin); - irq_pin++; - isr >>= 1; + n = find_first_bit(&isr, BITS_PER_LONG); + while (n < BITS_PER_LONG) { + generic_handle_irq(irq_find_mapping(at91_gpio->domain, n)); + n = find_next_bit(&isr, BITS_PER_LONG, n + 1); } } chip->irq_unmask(idata); @@ -424,6 +622,33 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) #ifdef CONFIG_DEBUG_FS +static void gpio_printf(struct seq_file *s, void __iomem *pio, unsigned mask) +{ + char *trigger = NULL; + char *polarity = NULL; + + if (__raw_readl(pio + PIO_IMR) & mask) { + if (!has_pio3() || !(__raw_readl(pio + PIO_AIMMR) & mask )) { + trigger = "edge"; + polarity = "both"; + } else { + if (__raw_readl(pio + PIO_ELSR) & mask) { + trigger = "level"; + polarity = __raw_readl(pio + PIO_FRLHSR) & mask ? + "high" : "low"; + } else { + trigger = "edge"; + polarity = __raw_readl(pio + PIO_FRLHSR) & mask ? + "rising" : "falling"; + } + } + seq_printf(s, "IRQ:%s-%s\t", trigger, polarity); + } else { + seq_printf(s, "GPIO:%s\t\t", + __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); + } +} + static int at91_gpio_show(struct seq_file *s, void *unused) { int bank, j; @@ -431,7 +656,7 @@ static int at91_gpio_show(struct seq_file *s, void *unused) /* print heading */ seq_printf(s, "Pin\t"); for (bank = 0; bank < gpio_banks; bank++) { - seq_printf(s, "PIO%c\t", 'A' + bank); + seq_printf(s, "PIO%c\t\t", 'A' + bank); }; seq_printf(s, "\n\n"); @@ -445,11 +670,10 @@ static int at91_gpio_show(struct seq_file *s, void *unused) unsigned mask = pin_to_mask(pin); if (__raw_readl(pio + PIO_PSR) & mask) - seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); + gpio_printf(s, pio, mask); else - seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A"); - - seq_printf(s, "\t"); + seq_printf(s, "%c\t\t", + peripheral_function(pio, mask)); } seq_printf(s, "\n"); @@ -488,46 +712,152 @@ postcore_initcall(at91_gpio_debugfs_init); */ static struct lock_class_key gpio_lock_class; +#if defined(CONFIG_OF) +static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct at91_gpio_chip *at91_gpio = h->host_data; + + irq_set_lockdep_class(virq, &gpio_lock_class); + + /* + * Can use the "simple" and not "edge" handler since it's + * shorter, and the AIC handles interrupts sanely. + */ + irq_set_chip_and_handler(virq, &gpio_irqchip, + handle_simple_irq); + set_irq_flags(virq, IRQF_VALID); + irq_set_chip_data(virq, at91_gpio); + + return 0; +} + +static struct irq_domain_ops at91_gpio_ops = { + .map = at91_gpio_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +int __init at91_gpio_of_irq_setup(struct device_node *node, + struct device_node *parent) +{ + struct at91_gpio_chip *prev = NULL; + int alias_idx = of_alias_get_id(node, "gpio"); + struct at91_gpio_chip *at91_gpio = &gpio_chip[alias_idx]; + + /* Setup proper .irq_set_type function */ + if (has_pio3()) + gpio_irqchip.irq_set_type = alt_gpio_irq_type; + else + gpio_irqchip.irq_set_type = gpio_irq_type; + + /* Disable irqs of this PIO controller */ + __raw_writel(~0, at91_gpio->regbase + PIO_IDR); + + /* Setup irq domain */ + at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio, + &at91_gpio_ops, at91_gpio); + if (!at91_gpio->domain) + panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n", + at91_gpio->pioc_idx); + + /* Setup chained handler */ + if (at91_gpio->pioc_idx) + prev = &gpio_chip[at91_gpio->pioc_idx - 1]; + + /* The toplevel handler handles one bank of GPIOs, except + * on some SoC it can handles up to three... + * We only set up the handler for the first of the list. + */ + if (prev && prev->next == at91_gpio) + return 0; + + at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent), + at91_gpio->pioc_hwirq); + irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio); + irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler); + + return 0; +} +#else +int __init at91_gpio_of_irq_setup(struct device_node *node, + struct device_node *parent) +{ + return -EINVAL; +} +#endif + +/* + * irqdomain initialization: pile up irqdomains on top of AIC range + */ +static void __init at91_gpio_irqdomain(struct at91_gpio_chip *at91_gpio) +{ + int irq_base; + + irq_base = irq_alloc_descs(-1, 0, at91_gpio->chip.ngpio, 0); + if (irq_base < 0) + panic("at91_gpio.%d: error %d: couldn't allocate IRQ numbers.\n", + at91_gpio->pioc_idx, irq_base); + at91_gpio->domain = irq_domain_add_legacy(NULL, at91_gpio->chip.ngpio, + irq_base, 0, + &irq_domain_simple_ops, NULL); + if (!at91_gpio->domain) + panic("at91_gpio.%d: couldn't allocate irq domain.\n", + at91_gpio->pioc_idx); +} + /* * Called from the processor-specific init to enable GPIO interrupt support. */ void __init at91_gpio_irq_setup(void) { - unsigned pioc, irq = gpio_to_irq(0); + unsigned pioc; + int gpio_irqnbr = 0; struct at91_gpio_chip *this, *prev; + /* Setup proper .irq_set_type function */ + if (has_pio3()) + gpio_irqchip.irq_set_type = alt_gpio_irq_type; + else + gpio_irqchip.irq_set_type = gpio_irq_type; + for (pioc = 0, this = gpio_chip, prev = NULL; pioc++ < gpio_banks; prev = this, this++) { - unsigned id = this->id; - unsigned i; + int offset; __raw_writel(~0, this->regbase + PIO_IDR); - for (i = 0, irq = gpio_to_irq(this->chip.base); i < 32; - i++, irq++) { - irq_set_lockdep_class(irq, &gpio_lock_class); + /* setup irq domain for this GPIO controller */ + at91_gpio_irqdomain(this); + + for (offset = 0; offset < this->chip.ngpio; offset++) { + unsigned int virq = irq_find_mapping(this->domain, offset); + irq_set_lockdep_class(virq, &gpio_lock_class); /* * Can use the "simple" and not "edge" handler since it's * shorter, and the AIC handles interrupts sanely. */ - irq_set_chip_and_handler(irq, &gpio_irqchip, + irq_set_chip_and_handler(virq, &gpio_irqchip, handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); + set_irq_flags(virq, IRQF_VALID); + irq_set_chip_data(virq, this); + + gpio_irqnbr++; } /* The toplevel handler handles one bank of GPIOs, except - * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in - * the list, so we only set up that handler. + * on some SoC it can handles up to three... + * We only set up the handler for the first of the list. */ if (prev && prev->next == this) continue; - irq_set_chip_data(id, this); - irq_set_chained_handler(id, gpio_irq_handler); + this->pioc_virq = irq_create_mapping(NULL, this->pioc_hwirq); + irq_set_chip_data(this->pioc_virq, this); + irq_set_chained_handler(this->pioc_virq, gpio_irq_handler); } - pr_info("AT91: %d gpio irqs in %d banks\n", irq - gpio_to_irq(0), gpio_banks); + pr_info("AT91: %d gpio irqs in %d banks\n", gpio_irqnbr, gpio_banks); } /* gpiolib support */ @@ -593,48 +923,175 @@ static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) at91_get_gpio_value(pin) ? "set" : "clear"); else - seq_printf(s, "[periph %s]\n", - __raw_readl(pio + PIO_ABSR) & - mask ? "B" : "A"); + seq_printf(s, "[periph %c]\n", + peripheral_function(pio, mask)); } } } +static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + int virq; + + if (offset < chip->ngpio) + virq = irq_create_mapping(at91_gpio->domain, offset); + else + virq = -ENXIO; + + dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n", + chip->label, offset + chip->base, virq); + return virq; +} + +static int __init at91_gpio_setup_clk(int idx) +{ + struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; + + /* retreive PIO controller's clock */ + at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label); + if (IS_ERR(at91_gpio->clock)) { + pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", idx); + goto err; + } + + if (clk_prepare(at91_gpio->clock)) + goto clk_prep_err; + + /* enable PIO controller's clock */ + if (clk_enable(at91_gpio->clock)) { + pr_err("at91_gpio.%d, failed to enable clock, ignoring.\n", idx); + goto clk_err; + } + + return 0; + +clk_err: + clk_unprepare(at91_gpio->clock); +clk_prep_err: + clk_put(at91_gpio->clock); +err: + return -EINVAL; +} + +#ifdef CONFIG_OF_GPIO +static void __init of_at91_gpio_init_one(struct device_node *np) +{ + int alias_idx; + struct at91_gpio_chip *at91_gpio; + + if (!np) + return; + + alias_idx = of_alias_get_id(np, "gpio"); + if (alias_idx >= MAX_GPIO_BANKS) { + pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n", + alias_idx, MAX_GPIO_BANKS); + return; + } + + at91_gpio = &gpio_chip[alias_idx]; + at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio; + + at91_gpio->regbase = of_iomap(np, 0); + if (!at91_gpio->regbase) { + pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", + alias_idx); + return; + } + + /* Get the interrupts property */ + if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) { + pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n", + alias_idx); + goto ioremap_err; + } + + /* Get capabilities from compatibility property */ + if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio")) + at91_gpio_caps |= AT91_GPIO_CAP_PIO3; + + /* Setup clock */ + if (at91_gpio_setup_clk(alias_idx)) + goto ioremap_err; + + at91_gpio->chip.of_node = np; + gpio_banks = max(gpio_banks, alias_idx + 1); + at91_gpio->pioc_idx = alias_idx; + return; + +ioremap_err: + iounmap(at91_gpio->regbase); +} + +static int __init of_at91_gpio_init(void) +{ + struct device_node *np = NULL; + + /* + * This isn't ideal, but it gets things hooked up until this + * driver is converted into a platform_device + */ + for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio") + of_at91_gpio_init_one(np); + + return gpio_banks > 0 ? 0 : -EINVAL; +} +#else +static int __init of_at91_gpio_init(void) +{ + return -EINVAL; +} +#endif + +static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) +{ + struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; + + at91_gpio->chip.base = idx * at91_gpio->chip.ngpio; + at91_gpio->pioc_hwirq = pioc_hwirq; + at91_gpio->pioc_idx = idx; + + at91_gpio->regbase = ioremap(regbase, 512); + if (!at91_gpio->regbase) { + pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", idx); + return; + } + + if (at91_gpio_setup_clk(idx)) + goto ioremap_err; + + gpio_banks = max(gpio_banks, idx + 1); + return; + +ioremap_err: + iounmap(at91_gpio->regbase); +} + /* * Called from the processor-specific init to enable GPIO pin support. */ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) { - unsigned i; + unsigned i; struct at91_gpio_chip *at91_gpio, *last = NULL; BUG_ON(nr_banks > MAX_GPIO_BANKS); - gpio_banks = nr_banks; + if (of_at91_gpio_init() < 0) { + /* No GPIO controller found in device tree */ + for (i = 0; i < nr_banks; i++) + at91_gpio_init_one(i, data[i].regbase, data[i].id); + } - for (i = 0; i < nr_banks; i++) { + for (i = 0; i < gpio_banks; i++) { at91_gpio = &gpio_chip[i]; - at91_gpio->id = data[i].id; - at91_gpio->chip.base = i * 32; - - at91_gpio->regbase = ioremap(data[i].regbase, 512); - if (!at91_gpio->regbase) { - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i); - continue; - } - - at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label); - if (!at91_gpio->clock) { - pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i); - continue; - } - - /* enable PIO controller's clock */ - clk_enable(at91_gpio->clock); - - /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */ - if (last && last->id == at91_gpio->id) + /* + * GPIO controller are grouped on some SoC: + * PIOC, PIOD and PIOE can share the same IRQ line + */ + if (last && last->pioc_hwirq == at91_gpio->pioc_hwirq) last->next = at91_gpio; last = at91_gpio; diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h new file mode 100644 index 000000000000..02fae9de746b --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_matrix.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 + */ + +#ifndef __MACH_AT91_MATRIX_H__ +#define __MACH_AT91_MATRIX_H__ + +#ifndef __ASSEMBLY__ +extern void __iomem *at91_matrix_base; + +#define at91_matrix_read(field) \ + __raw_readl(at91_matrix_base + field) + +#define at91_matrix_write(field, value) \ + __raw_writel(value, at91_matrix_base + field); + +#else +.extern at91_matrix_base +#endif + +#endif /* __MACH_AT91_MATRIX_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h index c6a31bf8a5c6..732b11c37f1a 100644 --- a/arch/arm/mach-at91/include/mach/at91_pio.h +++ b/arch/arm/mach-at91/include/mach/at91_pio.h @@ -40,10 +40,35 @@ #define PIO_PUER 0x64 /* Pull-up Enable Register */ #define PIO_PUSR 0x68 /* Pull-up Status Register */ #define PIO_ASR 0x70 /* Peripheral A Select Register */ +#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some sam9 only] */ #define PIO_BSR 0x74 /* Peripheral B Select Register */ +#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some sam9 only] */ #define PIO_ABSR 0x78 /* AB Status Register */ +#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */ +#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */ +#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */ +#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */ +#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ +#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */ +#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */ +#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */ #define PIO_OWER 0xa0 /* Output Write Enable Register */ #define PIO_OWDR 0xa4 /* Output Write Disable Register */ #define PIO_OWSR 0xa8 /* Output Write Status Register */ +#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */ +#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */ +#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */ +#define PIO_ESR 0xc0 /* Edge Select Register */ +#define PIO_LSR 0xc4 /* Level Select Register */ +#define PIO_ELSR 0xc8 /* Edge/Level Status Register */ +#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */ +#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */ +#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */ +#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */ + +#define ABCDSR_PERIPH_A 0x0 +#define ABCDSR_PERIPH_B 0x1 +#define ABCDSR_PERIPH_C 0x2 +#define ABCDSR_PERIPH_D 0x3 #endif diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index e46f93e34aab..36604782a78f 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -16,17 +16,27 @@ #ifndef AT91_PMC_H #define AT91_PMC_H -#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ -#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_pmc_base; -#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ +#define at91_pmc_read(field) \ + __raw_readl(at91_pmc_base + field) + +#define at91_pmc_write(field, value) \ + __raw_writel(value, at91_pmc_base + field) +#else +.extern at91_aic_base +#endif + +#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ +#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */ + +#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */ #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ @@ -36,27 +46,31 @@ #define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ #define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ -#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ -#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ -#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ +#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */ +#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */ #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ #define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ -#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ -#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ -#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */ +#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */ +#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */ -#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ +#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */ #define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ #define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ -#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ -#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ +#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */ +#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */ #define AT91_PMC_DIV (0xff << 0) /* Divider */ #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ @@ -67,27 +81,37 @@ #define AT91_PMC_USBDIV_4 (2 << 28) #define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ -#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ +#define AT91_PMC_MCKR 0x30 /* Master Clock Register */ #define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ #define AT91_PMC_CSS_SLOW (0 << 0) #define AT91_PMC_CSS_MAIN (1 << 0) #define AT91_PMC_CSS_PLLA (2 << 0) #define AT91_PMC_CSS_PLLB (3 << 0) #define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ -#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << 2) -#define AT91_PMC_PRES_2 (1 << 2) -#define AT91_PMC_PRES_4 (2 << 2) -#define AT91_PMC_PRES_8 (3 << 2) -#define AT91_PMC_PRES_16 (4 << 2) -#define AT91_PMC_PRES_32 (5 << 2) -#define AT91_PMC_PRES_64 (6 << 2) +#define PMC_PRES_OFFSET 2 +#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET) +#define PMC_ALT_PRES_OFFSET 4 +#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */ +#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET) #define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ #define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ #define AT91RM9200_PMC_MDIV_2 (1 << 8) #define AT91RM9200_PMC_MDIV_3 (2 << 8) #define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) #define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ @@ -99,35 +123,55 @@ #define AT91_PMC_PLLADIV2_OFF (0 << 12) #define AT91_PMC_PLLADIV2_ON (1 << 12) -#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */ +#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */ #define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ #define AT91_PMC_USBS_PLLA (0 << 0) #define AT91_PMC_USBS_UPLL (1 << 0) #define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */ +#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */ +#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */ +#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV) + +#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */ +#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */ #define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ #define AT91_PMC_CSSMCK_CSS (0 << 8) #define AT91_PMC_CSSMCK_MCK (1 << 8) -#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ -#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ -#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ +#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */ +#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */ +#define AT91_PMC_SR 0x68 /* Status Register */ #define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */ -#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ +#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */ +#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */ +#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */ + +#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */ +#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */ +#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */ +#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */ -#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */ -#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ +#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */ +#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ +#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ -#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */ +#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */ +#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ +#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */ +#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */ +#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV) +#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h new file mode 100644 index 000000000000..d8aeb278614e --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_ramc.h @@ -0,0 +1,32 @@ +/* + * Header file for the Atmel RAM Controller + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 only + */ + +#ifndef __AT91_RAMC_H__ +#define __AT91_RAMC_H__ + +#ifndef __ASSEMBLY__ +extern void __iomem *at91_ramc_base[]; + +#define at91_ramc_read(id, field) \ + __raw_readl(at91_ramc_base[id] + field) + +#define at91_ramc_write(id, field, value) \ + __raw_writel(value, at91_ramc_base[id] + field) +#else +.extern at91_ramc_base +#endif + +#define AT91_MEMCTRL_MC 0 +#define AT91_MEMCTRL_SDRAMC 1 +#define AT91_MEMCTRL_DDRSDR 2 + +#include <mach/at91rm9200_sdramc.h> +#include <mach/at91sam9_ddrsdr.h> +#include <mach/at91sam9_sdramc.h> + +#endif /* __AT91_RAMC_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h index 1d4fe822c77a..60478ea8bd46 100644 --- a/arch/arm/mach-at91/include/mach/at91_shdwc.h +++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h @@ -36,9 +36,11 @@ extern void __iomem *at91_shdwc_base; #define AT91_SHDW_WKMODE0_HIGH 1 #define AT91_SHDW_WKMODE0_LOW 2 #define AT91_SHDW_WKMODE0_ANYLEVEL 3 -#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */ #define AT91_SHDW_CPTWK0_(x) ((x) << 4) #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ +#define AT91_SHDW_RTCWKEN (1 << 17) /* Real Time Clock Wake-up Enable */ #define AT91_SHDW_SR 0x08 /* Shut Down Status Register */ #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h index 8847173e4101..969aac27109f 100644 --- a/arch/arm/mach-at91/include/mach/at91_st.h +++ b/arch/arm/mach-at91/include/mach/at91_st.h @@ -16,34 +16,46 @@ #ifndef AT91_ST_H #define AT91_ST_H -#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_st_base; + +#define at91_st_read(field) \ + __raw_readl(at91_st_base + field) + +#define at91_st_write(field, value) \ + __raw_writel(value, at91_st_base + field); +#else +.extern at91_st_base +#endif + +#define AT91_ST_CR 0x00 /* Control Register */ #define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ -#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */ +#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */ #define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ -#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */ +#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */ #define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ #define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ #define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ -#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */ +#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */ #define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ -#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */ +#define AT91_ST_SR 0x10 /* Status Register */ #define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ #define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ #define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ #define AT91_ST_ALMS (1 << 3) /* Alarm Status */ -#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */ -#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */ -#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */ +#define AT91_ST_IER 0x14 /* Interrupt Enable Register */ +#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */ +#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */ -#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */ +#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */ #define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ -#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */ +#define AT91_ST_CRTR 0x24 /* Current Real-time Register */ #define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h deleted file mode 100644 index 61d952902f2b..000000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9.h - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ -#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ -#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ -#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ -#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ -#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ -#define AT91CAP9_ID_US0 8 /* USART 0 */ -#define AT91CAP9_ID_US1 9 /* USART 1 */ -#define AT91CAP9_ID_US2 10 /* USART 2 */ -#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ -#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ -#define AT91CAP9_ID_CAN 13 /* CAN */ -#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ -#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ -#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ -#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ -#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ -#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ -#define AT91CAP9_ID_EMAC 22 /* Ethernet */ -#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ -#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ -#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ -#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ -#define AT91CAP9_ID_DMA 27 /* DMA Controller */ -#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ -#define AT91CAP9_ID_UHP 29 /* USB Host Port */ -#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91CAP9_BASE_UDPHS 0xfff78000 -#define AT91CAP9_BASE_TCB0 0xfff7c000 -#define AT91CAP9_BASE_TC0 0xfff7c000 -#define AT91CAP9_BASE_TC1 0xfff7c040 -#define AT91CAP9_BASE_TC2 0xfff7c080 -#define AT91CAP9_BASE_MCI0 0xfff80000 -#define AT91CAP9_BASE_MCI1 0xfff84000 -#define AT91CAP9_BASE_TWI 0xfff88000 -#define AT91CAP9_BASE_US0 0xfff8c000 -#define AT91CAP9_BASE_US1 0xfff90000 -#define AT91CAP9_BASE_US2 0xfff94000 -#define AT91CAP9_BASE_SSC0 0xfff98000 -#define AT91CAP9_BASE_SSC1 0xfff9c000 -#define AT91CAP9_BASE_AC97C 0xfffa0000 -#define AT91CAP9_BASE_SPI0 0xfffa4000 -#define AT91CAP9_BASE_SPI1 0xfffa8000 -#define AT91CAP9_BASE_CAN 0xfffac000 -#define AT91CAP9_BASE_PWMC 0xfffb8000 -#define AT91CAP9_BASE_EMAC 0xfffbc000 -#define AT91CAP9_BASE_ADC 0xfffc0000 -#define AT91CAP9_BASE_ISI 0xfffc4000 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (cpu_is_at91cap9_revB() ? \ - (0xfffffd50 - AT91_BASE_SYS) : \ - (0xfffffd60 - AT91_BASE_SYS)) - -#define AT91CAP9_BASE_ECC 0xffffe200 -#define AT91CAP9_BASE_DMA 0xffffec00 -#define AT91CAP9_BASE_SMC 0xffffe800 -#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1 -#define AT91CAP9_BASE_PIOA 0xfffff200 -#define AT91CAP9_BASE_PIOB 0xfffff400 -#define AT91CAP9_BASE_PIOC 0xfffff600 -#define AT91CAP9_BASE_PIOD 0xfffff800 -#define AT91CAP9_BASE_RSTC 0xfffffd00 -#define AT91CAP9_BASE_SHDWC 0xfffffd10 -#define AT91CAP9_BASE_RTT 0xfffffd20 -#define AT91CAP9_BASE_PIT 0xfffffd30 -#define AT91CAP9_BASE_WDT 0xfffffd40 - -#define AT91_USART0 AT91CAP9_BASE_US0 -#define AT91_USART1 AT91CAP9_BASE_US1 -#define AT91_USART2 AT91CAP9_BASE_US2 - - -/* - * Internal Memory. - */ -#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ -#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ - -#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ - -#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ -#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h deleted file mode 100644 index 4b9d4aff4b4f..000000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9_matrix.h - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_MATRIX_H -#define AT91CAP9_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ -#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ -#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ -#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ -#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ -#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ - -#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */ -#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */ -#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */ -#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ -#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ -#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index bacb51141819..603e6aac2a4f 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -77,26 +77,22 @@ /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */ -#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */ -#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */ - #define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */ #define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */ #define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */ #define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */ #define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */ +#define AT91RM9200_BASE_ST 0xfffffd00 /* System Timer */ #define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */ +#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */ #define AT91_USART0 AT91RM9200_BASE_US0 #define AT91_USART1 AT91RM9200_BASE_US1 #define AT91_USART2 AT91RM9200_BASE_US2 #define AT91_USART3 AT91RM9200_BASE_US3 -#define AT91_MATRIX 0 /* not supported */ - /* * Internal Memory. */ diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h index d34e4ed89349..aeaadfb452af 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h @@ -17,10 +17,10 @@ #define AT91RM9200_MC_H /* Memory Controller */ -#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */ +#define AT91_MC_RCR 0x00 /* MC Remap Control Register */ #define AT91_MC_RCB (1 << 0) /* Remap Command Bit */ -#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */ +#define AT91_MC_ASR 0x04 /* MC Abort Status Register */ #define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */ #define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */ #define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */ @@ -40,16 +40,16 @@ #define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */ #define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */ -#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */ +#define AT91_MC_AASR 0x08 /* MC Abort Address Status Register */ -#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */ +#define AT91_MC_MPR 0x0c /* MC Master Priority Register */ #define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */ #define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */ #define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */ #define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */ /* External Bus Interface (EBI) registers */ -#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */ +#define AT91_EBI_CSA 0x60 /* Chip Select Assignment Register */ #define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */ #define AT91_EBI_CS0A_SMC (0 << 0) #define AT91_EBI_CS0A_BFC (1 << 0) @@ -66,7 +66,7 @@ #define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */ /* Static Memory Controller (SMC) registers */ -#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */ +#define AT91_SMC_CSR(n) (0x70 + ((n) * 4)) /* SMC Chip Select Register */ #define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */ #define AT91_SMC_NWS_(x) ((x) << 0) #define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */ @@ -87,52 +87,8 @@ #define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */ #define AT91_SMC_RWHOLD_(x) ((x) << 28) -/* SDRAM Controller registers */ -#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL (0 << 0) -#define AT91_SDRAMC_MODE_NOP (1 << 0) -#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0) -#define AT91_SDRAMC_MODE_LMR (3 << 0) -#define AT91_SDRAMC_MODE_REFRESH (4 << 0) -#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 4) -#define AT91_SDRAMC_DBW_16 (1 << 4) - -#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ - -#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */ -#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */ -#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */ - /* Burst Flash Controller register */ -#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */ +#define AT91_BFC_MR 0xc0 /* Mode Register */ #define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */ #define AT91_BFC_BFCOM_DISABLED (0 << 0) #define AT91_BFC_BFCOM_ASYNC (1 << 0) diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h new file mode 100644 index 000000000000..aa047f458f1b --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h @@ -0,0 +1,63 @@ +/* + * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Memory Controllers (SDRAMC only) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_SDRAMC_H +#define AT91RM9200_SDRAMC_H + +/* SDRAM Controller registers */ +#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */ +#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0) +#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0) +#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0) +#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0) +#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0) +#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */ +#define AT91RM9200_SDRAMC_DBW_32 (0 << 4) +#define AT91RM9200_SDRAMC_DBW_16 (1 << 4) + +#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */ +#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ + +#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */ +#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91RM9200_SDRAMC_NC_8 (0 << 0) +#define AT91RM9200_SDRAMC_NC_9 (1 << 0) +#define AT91RM9200_SDRAMC_NC_10 (2 << 0) +#define AT91RM9200_SDRAMC_NC_11 (3 << 0) +#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91RM9200_SDRAMC_NR_11 (0 << 2) +#define AT91RM9200_SDRAMC_NR_12 (1 << 2) +#define AT91RM9200_SDRAMC_NR_13 (2 << 2) +#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91RM9200_SDRAMC_NB_2 (0 << 4) +#define AT91RM9200_SDRAMC_NB_4 (1 << 4) +#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91RM9200_SDRAMC_CAS_2 (2 << 5) +#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ +#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ +#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ +#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ +#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ +#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ + +#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */ +#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */ +#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */ +#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */ +#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */ +#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index fa5ca278adeb..08ae9afd00fe 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -78,15 +78,12 @@ #define AT91SAM9260_BASE_ADC 0xfffe0000 /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - #define AT91SAM9260_BASE_ECC 0xffffe800 +#define AT91SAM9260_BASE_SDRAMC 0xffffea00 #define AT91SAM9260_BASE_SMC 0xffffec00 +#define AT91SAM9260_BASE_MATRIX 0xffffee00 #define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0 #define AT91SAM9260_BASE_PIOA 0xfffff400 #define AT91SAM9260_BASE_PIOB 0xfffff600 @@ -96,6 +93,7 @@ #define AT91SAM9260_BASE_RTT 0xfffffd20 #define AT91SAM9260_BASE_PIT 0xfffffd30 #define AT91SAM9260_BASE_WDT 0xfffffd40 +#define AT91SAM9260_BASE_GPBR 0xfffffd50 #define AT91_USART0 AT91SAM9260_BASE_US0 #define AT91_USART1 AT91SAM9260_BASE_US1 @@ -115,6 +113,8 @@ #define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ #define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ #define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ +#define AT91SAM9260_SRAM_BASE 0x002FF000 /* Internal SRAM base address */ +#define AT91SAM9260_SRAM_SIZE SZ_8K /* Internal SRAM size (8Kb) */ #define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ @@ -128,6 +128,8 @@ #define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */ #define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ #define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ +#define AT91SAM9G20_SRAM_BASE 0x002FC000 /* Internal SRAM base address */ +#define AT91SAM9G20_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ #define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h index 020f02ed921a..f459df420629 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h @@ -15,12 +15,12 @@ #ifndef AT91SAM9260_MATRIX_H #define AT91SAM9260_MATRIX_H -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ #define AT91_MATRIX_ULBT_INFINITE (0 << 0) #define AT91_MATRIX_ULBT_SINGLE (1 << 0) @@ -28,11 +28,11 @@ #define AT91_MATRIX_ULBT_EIGHT (3 << 0) #define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ #define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -43,11 +43,11 @@ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ #define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ #define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ #define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ @@ -55,11 +55,11 @@ #define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ #define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_CS1A_SMC (0 << 1) #define AT91_MATRIX_CS1A_SDRAMC (1 << 1) diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 7cde2d36570e..44fbdc12ee62 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -63,14 +63,11 @@ /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - #define AT91SAM9261_BASE_SMC 0xffffec00 +#define AT91SAM9261_BASE_MATRIX 0xffffee00 +#define AT91SAM9261_BASE_SDRAMC 0xffffea00 #define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0 #define AT91SAM9261_BASE_PIOA 0xfffff400 #define AT91SAM9261_BASE_PIOB 0xfffff600 @@ -80,6 +77,7 @@ #define AT91SAM9261_BASE_RTT 0xfffffd20 #define AT91SAM9261_BASE_PIT 0xfffffd30 #define AT91SAM9261_BASE_WDT 0xfffffd40 +#define AT91SAM9261_BASE_GPBR 0xfffffd50 #define AT91_USART0 AT91SAM9261_BASE_US0 #define AT91_USART1 AT91SAM9261_BASE_US1 diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h index 69c6501915d9..a50cdf8b8ca4 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h @@ -15,15 +15,15 @@ #ifndef AT91SAM9261_MATRIX_H #define AT91SAM9261_MATRIX_H -#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ +#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */ #define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -31,7 +31,7 @@ #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) #define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */ +#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */ #define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ #define AT91_MATRIX_ITCM_0 (0 << 0) #define AT91_MATRIX_ITCM_16 (5 << 0) @@ -43,7 +43,7 @@ #define AT91_MATRIX_DTCM_32 (6 << 4) #define AT91_MATRIX_DTCM_64 (7 << 4) -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_CS1A_SMC (0 << 1) #define AT91_MATRIX_CS1A_SDRAMC (1 << 1) @@ -58,7 +58,7 @@ #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */ +#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */ #define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 5949abda962b..d96cbb2e03c4 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -72,18 +72,15 @@ #define AT91SAM9263_BASE_2DGE 0xfffc8000 /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS) -#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) - #define AT91SAM9263_BASE_ECC0 0xffffe000 +#define AT91SAM9263_BASE_SDRAMC0 0xffffe200 #define AT91SAM9263_BASE_SMC0 0xffffe400 #define AT91SAM9263_BASE_ECC1 0xffffe600 +#define AT91SAM9263_BASE_SDRAMC1 0xffffe800 #define AT91SAM9263_BASE_SMC1 0xffffea00 +#define AT91SAM9263_BASE_MATRIX 0xffffec00 #define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1 #define AT91SAM9263_BASE_PIOA 0xfffff200 #define AT91SAM9263_BASE_PIOB 0xfffff400 @@ -96,6 +93,7 @@ #define AT91SAM9263_BASE_PIT 0xfffffd30 #define AT91SAM9263_BASE_WDT 0xfffffd40 #define AT91SAM9263_BASE_RTT1 0xfffffd50 +#define AT91SAM9263_BASE_GPBR 0xfffffd60 #define AT91_USART0 AT91SAM9263_BASE_US0 #define AT91_USART1 AT91SAM9263_BASE_US1 diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h index 9b3efd3eb2f3..ebb5fdb565e0 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h @@ -15,15 +15,15 @@ #ifndef AT91SAM9263_MATRIX_H #define AT91SAM9263_MATRIX_H -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ #define AT91_MATRIX_ULBT_INFINITE (0 << 0) #define AT91_MATRIX_ULBT_SINGLE (1 << 0) @@ -31,14 +31,14 @@ #define AT91_MATRIX_ULBT_EIGHT (3 << 0) #define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ #define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -49,22 +49,22 @@ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ #define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ #define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ #define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ @@ -75,7 +75,7 @@ #define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ #define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_RCB2 (1 << 2) @@ -86,7 +86,7 @@ #define AT91_MATRIX_RCB7 (1 << 7) #define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ +#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ #define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ #define AT91_MATRIX_ITCM_0 (0 << 0) #define AT91_MATRIX_ITCM_16 (5 << 0) @@ -96,7 +96,7 @@ #define AT91_MATRIX_DTCM_16 (5 << 4) #define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */ #define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) #define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) @@ -114,7 +114,7 @@ #define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) #define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */ #define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) #define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h index e2f8da8ce5bc..0210797abf2e 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -59,7 +59,6 @@ #define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ #define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ #define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ #define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ @@ -76,7 +75,6 @@ #define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ #define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ -#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -94,11 +92,9 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ -#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91CAP9_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 #define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ @@ -106,16 +102,10 @@ #define AT91_DDRSDRC_DBW_16BITS (1 << 4) #define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ -#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ #define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ #define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ #define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ @@ -131,10 +121,4 @@ #define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ #define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ -/* Register access macros */ -#define at91_ramc_read(num, reg) \ - at91_sys_read(AT91_DDRSDRC##num + reg) -#define at91_ramc_write(num, reg, value) \ - at91_sys_write(AT91_DDRSDRC##num + reg, value) - #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h index 100f5a592926..3d085a9a7450 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h @@ -82,10 +82,4 @@ #define AT91_SDRAMC_MD_SDRAM 0 #define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 -/* Register access macros */ -#define at91_ramc_read(num, reg) \ - at91_sys_read(AT91_SDRAMC##num + reg) -#define at91_ramc_write(num, reg, value) \ - at91_sys_write(AT91_SDRAMC##num + reg, value) - #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index dd9c95ea0862..d052abcff852 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -84,17 +84,14 @@ #define AT91SAM9G45_BASE_TC5 0xfffd4080 /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) - #define AT91SAM9G45_BASE_ECC 0xffffe200 +#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400 +#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600 #define AT91SAM9G45_BASE_DMA 0xffffec00 #define AT91SAM9G45_BASE_SMC 0xffffe800 +#define AT91SAM9G45_BASE_MATRIX 0xffffea00 #define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1 #define AT91SAM9G45_BASE_PIOA 0xfffff200 #define AT91SAM9G45_BASE_PIOB 0xfffff400 @@ -107,6 +104,7 @@ #define AT91SAM9G45_BASE_PIT 0xfffffd30 #define AT91SAM9G45_BASE_WDT 0xfffffd40 #define AT91SAM9G45_BASE_RTC 0xfffffdb0 +#define AT91SAM9G45_BASE_GPBR 0xfffffd60 #define AT91_USART0 AT91SAM9G45_BASE_US0 #define AT91_USART1 AT91SAM9G45_BASE_US1 diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h index c972d60e0aeb..b76e2ed2fbc2 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h @@ -15,18 +15,18 @@ #ifndef AT91SAM9G45_MATRIX_H #define AT91SAM9G45_MATRIX_H -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ +#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */ +#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */ +#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ #define AT91_MATRIX_ULBT_INFINITE (0 << 0) #define AT91_MATRIX_ULBT_SINGLE (1 << 0) @@ -37,14 +37,14 @@ #define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) #define AT91_MATRIX_ULBT_128 (7 << 0) -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ #define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -52,22 +52,22 @@ #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) #define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ #define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ #define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ #define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ @@ -81,7 +81,7 @@ #define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ #define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_RCB2 (1 << 2) @@ -95,7 +95,7 @@ #define AT91_MATRIX_RCB10 (1 << 10) #define AT91_MATRIX_RCB11 (1 << 11) -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */ +#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */ #define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ #define AT91_MATRIX_ITCM_0 (0 << 0) #define AT91_MATRIX_ITCM_32 (6 << 0) @@ -107,12 +107,12 @@ #define AT91_MATRIX_TCM_NO_WS (0x0 << 11) #define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) -#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */ +#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */ #define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ #define AT91C_VDEC_SEL_OFF (0 << 0) #define AT91C_VDEC_SEL_ON (1 << 0) -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) #define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) @@ -138,13 +138,13 @@ #define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) #define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ +#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */ #define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ #define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) #define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) #define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ +#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */ #define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ #define AT91_MATRIX_WPSR_NO_WPV (0 << 0) #define AT91_MATRIX_WPSR_WPV (1 << 0) diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index d7bead7118da..e0073eb10144 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -69,15 +69,13 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) #define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9RL_BASE_DMA 0xffffe600 #define AT91SAM9RL_BASE_ECC 0xffffe800 +#define AT91SAM9RL_BASE_SDRAMC 0xffffea00 #define AT91SAM9RL_BASE_SMC 0xffffec00 +#define AT91SAM9RL_BASE_MATRIX 0xffffee00 #define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0 #define AT91SAM9RL_BASE_PIOA 0xfffff400 #define AT91SAM9RL_BASE_PIOB 0xfffff600 @@ -88,6 +86,7 @@ #define AT91SAM9RL_BASE_RTT 0xfffffd20 #define AT91SAM9RL_BASE_PIT 0xfffffd30 #define AT91SAM9RL_BASE_WDT 0xfffffd40 +#define AT91SAM9RL_BASE_GPBR 0xfffffd60 #define AT91SAM9RL_BASE_RTC 0xfffffe00 #define AT91_USART0 AT91SAM9RL_BASE_US0 diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h index 5f9149071fe5..6d160adadafc 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h @@ -14,12 +14,12 @@ #ifndef AT91SAM9RL_MATRIX_H #define AT91SAM9RL_MATRIX_H -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ #define AT91_MATRIX_ULBT_INFINITE (0 << 0) #define AT91_MATRIX_ULBT_SINGLE (1 << 0) @@ -27,12 +27,12 @@ #define AT91_MATRIX_ULBT_EIGHT (3 << 0) #define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ #define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -43,12 +43,12 @@ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ #define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ #define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ #define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ @@ -56,7 +56,7 @@ #define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ #define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_RCB2 (1 << 2) @@ -64,7 +64,7 @@ #define AT91_MATRIX_RCB4 (1 << 4) #define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ +#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ #define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ #define AT91_MATRIX_ITCM_0 (0 << 0) #define AT91_MATRIX_ITCM_16 (5 << 0) @@ -74,7 +74,7 @@ #define AT91_MATRIX_DTCM_16 (5 << 4) #define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ +#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */ #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_CS1A_SMC (0 << 1) #define AT91_MATRIX_CS1A_SDRAMC (1 << 1) diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h new file mode 100644 index 000000000000..88e43d534cdf --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h @@ -0,0 +1,74 @@ +/* + * Chip-specific header file for the AT91SAM9x5 family + * + * Copyright (C) 2009-2012 Atmel Corporation. + * + * Common definitions. + * Based on AT91SAM9x5 datasheet. + * + * Licensed under GPLv2 or later. + */ + +#ifndef AT91SAM9X5_H +#define AT91SAM9X5_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91SAM9X5_ID_PIOAB 2 /* Parallel I/O Controller A and B */ +#define AT91SAM9X5_ID_PIOCD 3 /* Parallel I/O Controller C and D */ +#define AT91SAM9X5_ID_SMD 4 /* SMD Soft Modem (SMD) */ +#define AT91SAM9X5_ID_USART0 5 /* USART 0 */ +#define AT91SAM9X5_ID_USART1 6 /* USART 1 */ +#define AT91SAM9X5_ID_USART2 7 /* USART 2 */ +#define AT91SAM9X5_ID_USART3 8 /* USART 3 */ +#define AT91SAM9X5_ID_TWI0 9 /* Two-Wire Interface 0 */ +#define AT91SAM9X5_ID_TWI1 10 /* Two-Wire Interface 1 */ +#define AT91SAM9X5_ID_TWI2 11 /* Two-Wire Interface 2 */ +#define AT91SAM9X5_ID_MCI0 12 /* High Speed Multimedia Card Interface 0 */ +#define AT91SAM9X5_ID_SPI0 13 /* Serial Peripheral Interface 0 */ +#define AT91SAM9X5_ID_SPI1 14 /* Serial Peripheral Interface 1 */ +#define AT91SAM9X5_ID_UART0 15 /* UART 0 */ +#define AT91SAM9X5_ID_UART1 16 /* UART 1 */ +#define AT91SAM9X5_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ +#define AT91SAM9X5_ID_PWM 18 /* Pulse Width Modulation Controller */ +#define AT91SAM9X5_ID_ADC 19 /* ADC Controller */ +#define AT91SAM9X5_ID_DMA0 20 /* DMA Controller 0 */ +#define AT91SAM9X5_ID_DMA1 21 /* DMA Controller 1 */ +#define AT91SAM9X5_ID_UHPHS 22 /* USB Host High Speed */ +#define AT91SAM9X5_ID_UDPHS 23 /* USB Device High Speed */ +#define AT91SAM9X5_ID_EMAC0 24 /* Ethernet MAC0 */ +#define AT91SAM9X5_ID_LCDC 25 /* LCD Controller */ +#define AT91SAM9X5_ID_ISI 25 /* Image Sensor Interface */ +#define AT91SAM9X5_ID_MCI1 26 /* High Speed Multimedia Card Interface 1 */ +#define AT91SAM9X5_ID_EMAC1 27 /* Ethernet MAC1 */ +#define AT91SAM9X5_ID_SSC 28 /* Synchronous Serial Controller */ +#define AT91SAM9X5_ID_CAN0 29 /* CAN Controller 0 */ +#define AT91SAM9X5_ID_CAN1 30 /* CAN Controller 1 */ +#define AT91SAM9X5_ID_IRQ0 31 /* Advanced Interrupt Controller */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9X5_BASE_USART0 0xf801c000 +#define AT91SAM9X5_BASE_USART1 0xf8020000 +#define AT91SAM9X5_BASE_USART2 0xf8024000 + +/* + * Base addresses for early serial code (uncompress.h) + */ +#define AT91_DBGU AT91_BASE_DBGU0 +#define AT91_USART0 AT91SAM9X5_BASE_USART0 +#define AT91_USART1 AT91SAM9X5_BASE_USART1 +#define AT91_USART2 AT91SAM9X5_BASE_USART2 + +/* + * Internal Memory. + */ +#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9X5_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ + +#define AT91SAM9X5_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9X5_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h new file mode 100644 index 000000000000..a606d3966470 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h @@ -0,0 +1,53 @@ +/* + * Matrix-centric header file for the AT91SAM9x5 family + * + * Copyright (C) 2009-2012 Atmel Corporation. + * + * Only EBI related registers. + * Write Protect register definitions may be useful. + * + * Licensed under GPLv2 or later. + */ + +#ifndef AT91SAM9X5_MATRIX_H +#define AT91SAM9X5_MATRIX_H + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ +#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) +#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) +#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ +#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) +#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) +#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ +#define AT91_MATRIX_MP_OFF (0 << 25) +#define AT91_MATRIX_MP_ON (1 << 25) + +#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ +#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ +#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) +#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) +#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ + +#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ +#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ +#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) +#define AT91_MATRIX_WPSR_WPV (1 << 0) +#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index a57829f4fd18..90680217064e 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -28,18 +28,18 @@ #define AT91X40_ID_IRQ2 18 /* External IRQ 2 */ /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ #define AT91_BASE_SYS 0xffc00000 -#define AT91_EBI (0xffe00000 - AT91_BASE_SYS) /* External Bus Interface */ -#define AT91_SF (0xfff00000 - AT91_BASE_SYS) /* Special Function */ -#define AT91_USART1 (0xfffcc000 - AT91_BASE_SYS) /* USART 1 */ -#define AT91_USART0 (0xfffd0000 - AT91_BASE_SYS) /* USART 0 */ -#define AT91_TC (0xfffe0000 - AT91_BASE_SYS) /* Timer Counter */ -#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */ -#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */ -#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */ +#define AT91_EBI 0xffe00000 /* External Bus Interface */ +#define AT91_SF 0xfff00000 /* Special Function */ +#define AT91_USART1 0xfffcc000 /* USART 1 */ +#define AT91_USART0 0xfffd0000 /* USART 0 */ +#define AT91_TC 0xfffe0000 /* Timer Counter */ +#define AT91_PIOA 0xffff0000 /* PIO Controller A */ +#define AT91_PS 0xffff4000 /* Power Save */ +#define AT91_WD 0xffff8000 /* Watchdog Timer */ /* * The AT91x40 series doesn't have a debug unit like the other AT91 parts. diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 3b33f07b1e11..544a5d5ce416 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -41,6 +41,7 @@ #include <sound/atmel-ac97c.h> #include <linux/serial.h> #include <linux/platform_data/macb.h> +#include <linux/platform_data/atmel.h> /* USB Device */ struct at91_udc_data { @@ -98,18 +99,6 @@ extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); - /* NAND / SmartMedia */ -struct atmel_nand_data { - int enable_pin; /* chip enable */ - int det_pin; /* card detect */ - int rdy_pin; /* ready/busy */ - u8 rdy_pin_active_low; /* rdy_pin value is inverted */ - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 bus_width_16; /* buswidth is 16 bit */ - struct mtd_partition *parts; - unsigned int num_parts; -}; extern void __init at91_add_device_nand(struct atmel_nand_data *data); /* I2C*/ @@ -179,7 +168,9 @@ extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); extern void __init at91_add_device_ac97(struct ac97c_platform_data *data); /* ISI */ -extern void __init at91_add_device_isi(void); +struct isi_platform_data; +extern void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck); /* Touchscreen Controller */ struct at91_tsadcc_data { diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index f6ce936dba2b..0118c3338552 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -25,7 +25,6 @@ #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ #define ARCH_ID_AT91SAM9X5 0x819a05a0 -#define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 #define ARCH_ID_AT91SAM9XE256 0x329a93a0 @@ -51,10 +50,6 @@ #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 -/* PMC revision */ -#define ARCH_REVISION_CAP9_B 0x399 -#define ARCH_REVISION_CAP9_C 0x601 - /* RM9200 type */ #define ARCH_REVISON_9200_BGA (0 << 0) #define ARCH_REVISON_9200_PQFP (1 << 0) @@ -63,9 +58,6 @@ enum at91_soc_type { /* 920T */ AT91_SOC_RM9200, - /* CAP */ - AT91_SOC_CAP9, - /* SAM92xx */ AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263, @@ -86,9 +78,6 @@ enum at91_soc_subtype { /* RM9200 */ AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP, - /* CAP9 */ - AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C, - /* SAM9260 */ AT91_SOC_SAM9XE, @@ -195,16 +184,6 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91sam9x25() (0) #endif -#ifdef CONFIG_ARCH_AT91CAP9 -#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9) -#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B) -#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C) -#else -#define cpu_is_at91cap9() (0) -#define cpu_is_at91cap9_revB() (0) -#define cpu_is_at91cap9_revC() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S index 423eea0ed74c..903bf205a333 100644 --- a/arch/arm/mach-at91/include/mach/entry-macro.S +++ b/arch/arm/mach-at91/include/mach/entry-macro.S @@ -13,17 +13,11 @@ #include <mach/hardware.h> #include <mach/at91_aic.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp ldr \base, =at91_aic_base @ base virtual address of AIC peripheral ldr \base, [\base] .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index e3fd225121c7..eed465ab0dd7 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -191,10 +191,15 @@ extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup); extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup); extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup); extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup); extern int __init_or_module at91_set_gpio_output(unsigned pin, int value); extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on); +extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div); extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on); +extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on); +extern int __init_or_module at91_disable_schmitt_trig(unsigned pin); /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); @@ -204,18 +209,6 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); -/*-------------------------------------------------------------------------*/ - -/* wrappers for "new style" GPIO calls. the old AT91-specific ones should - * eventually be removed (along with this errno.h inclusion), and the - * gpio request/free calls should probably be implemented. - */ - -#include <asm/errno.h> - -#define gpio_to_irq(gpio) (gpio + NR_AIC_IRQS) -#define irq_to_gpio(irq) (irq - NR_AIC_IRQS) - #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 2d0e4e998566..e9e29a6c3868 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -19,7 +19,7 @@ /* DBGU base */ /* rm9200, 9260/9g20, 9261/9g10, 9rl */ #define AT91_BASE_DBGU0 0xfffff200 -/* 9263, 9g45, cap9 */ +/* 9263, 9g45 */ #define AT91_BASE_DBGU1 0xffffee00 #if defined(CONFIG_ARCH_AT91RM9200) @@ -34,8 +34,8 @@ #include <mach/at91sam9rl.h> #elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9g45.h> -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9.h> +#elif defined(CONFIG_ARCH_AT91SAM9X5) +#include <mach/at91sam9x5.h> #elif defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> #else @@ -59,9 +59,10 @@ /* * On all at91 have the Advanced Interrupt Controller starts at address - * 0xfffff000 + * 0xfffff000 and the Power Management Controller starts at 0xfffffc00 */ #define AT91_AIC 0xfffff000 +#define AT91_PMC 0xfffffc00 /* * Peripheral identifiers/interrupts. diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h index 4ca09ef7ca29..4003001eca3d 100644 --- a/arch/arm/mach-at91/include/mach/io.h +++ b/arch/arm/mach-at91/include/mach/io.h @@ -28,22 +28,4 @@ #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) -#ifndef __ASSEMBLY__ - -static inline unsigned int at91_sys_read(unsigned int reg_offset) -{ - void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - - return __raw_readl(addr + reg_offset); -} - -static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) -{ - void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - - __raw_writel(value, addr + reg_offset); -} - -#endif - #endif diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h deleted file mode 100644 index cbd64f3bcecd..000000000000 --- a/arch/arm/mach-at91/include/mach/system.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/system.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/hardware.h> -#include <mach/at91_st.h> -#include <mach/at91_dbgu.h> -#include <mach/at91_pmc.h> - -static inline void arch_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ -#ifdef AT91_PS - at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU); -#else - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); -#endif -#ifndef CONFIG_CPU_ARM920T - /* - * Set the processor (CP15) into 'Wait for Interrupt' mode. - * Post-RM9200 processors need this in conjunction with the above - * to save power when idle. - */ - cpu_do_idle(); -#endif -} - -#endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index ec164a4124c9..ef79a9aafc08 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -7,6 +7,8 @@ #ifndef __ARCH_SYSTEM_REV_H__ #define __ARCH_SYSTEM_REV_H__ +#include <asm/system_info.h> + /* * board revision encoding * mach specific diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index be6b639ecd7b..cfcfcbe36269 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -24,6 +24,12 @@ #include <linux/module.h> #include <linux/mm.h> #include <linux/types.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irqdomain.h> +#include <linux/err.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -34,22 +40,24 @@ #include <asm/mach/map.h> void __iomem *at91_aic_base; +static struct irq_domain *at91_aic_domain; +static struct device_node *at91_aic_np; static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ - at91_aic_write(AT91_AIC_IDCR, 1 << d->irq); + at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq); } static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ - at91_aic_write(AT91_AIC_IECR, 1 << d->irq); + at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq); } unsigned int at91_extern_irq; -#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq) +#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq) static int at91_aic_set_type(struct irq_data *d, unsigned type) { @@ -63,13 +71,13 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) srctype = AT91_AIC_SRCTYPE_RISING; break; case IRQ_TYPE_LEVEL_LOW: - if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq)) /* only supported on external interrupts */ + if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_LOW; else return -EINVAL; break; case IRQ_TYPE_EDGE_FALLING: - if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq)) /* only supported on external interrupts */ + if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_FALLING; else return -EINVAL; @@ -78,8 +86,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) return -EINVAL; } - smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype); + smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); return 0; } @@ -90,13 +98,13 @@ static u32 backups; static int at91_aic_set_wake(struct irq_data *d, unsigned value) { - if (unlikely(d->irq >= 32)) + if (unlikely(d->hwirq >= NR_AIC_IRQS)) return -EINVAL; if (value) - wakeups |= (1 << d->irq); + wakeups |= (1 << d->hwirq); else - wakeups &= ~(1 << d->irq); + wakeups &= ~(1 << d->hwirq); return 0; } @@ -127,46 +135,112 @@ static struct irq_chip at91_aic_chip = { .irq_set_wake = at91_aic_set_wake, }; +static void __init at91_aic_hw_init(unsigned int spu_vector) +{ + int i; + + /* + * Perform 8 End Of Interrupt Command to make sure AIC + * will not Lock out nIRQ + */ + for (i = 0; i < 8; i++) + at91_aic_write(AT91_AIC_EOICR, 0); + + /* + * Spurious Interrupt ID in Spurious Vector Register. + * When there is no current interrupt, the IRQ Vector Register + * reads the value stored in AIC_SPU + */ + at91_aic_write(AT91_AIC_SPU, spu_vector); + + /* No debugging in AIC: Debug (Protect) Control Register */ + at91_aic_write(AT91_AIC_DCR, 0); + + /* Disable and clear all interrupts initially */ + at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF); + at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); +} + +#if defined(CONFIG_OF) +static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + /* Put virq number in Source Vector Register */ + at91_aic_write(AT91_AIC_SVR(hw), virq); + + /* Active Low interrupt, without priority */ + at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW); + + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static struct irq_domain_ops at91_aic_irq_ops = { + .map = at91_aic_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +int __init at91_aic_of_init(struct device_node *node, + struct device_node *parent) +{ + at91_aic_base = of_iomap(node, 0); + at91_aic_np = node; + + at91_aic_domain = irq_domain_add_linear(at91_aic_np, NR_AIC_IRQS, + &at91_aic_irq_ops, NULL); + if (!at91_aic_domain) + panic("Unable to add AIC irq domain (DT)\n"); + + irq_set_default_host(at91_aic_domain); + + at91_aic_hw_init(NR_AIC_IRQS); + + return 0; +} +#endif + /* * Initialize the AIC interrupt controller. */ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) { unsigned int i; + int irq_base; at91_aic_base = ioremap(AT91_AIC, 512); - if (!at91_aic_base) - panic("Impossible to ioremap AT91_AIC\n"); + panic("Unable to ioremap AIC registers\n"); + + /* Add irq domain for AIC */ + irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0); + if (irq_base < 0) { + WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n"); + irq_base = 0; + } + at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS, + irq_base, 0, + &irq_domain_simple_ops, NULL); + + if (!at91_aic_domain) + panic("Unable to add AIC irq domain\n"); + + irq_set_default_host(at91_aic_domain); /* * The IVR is used by macro get_irqnr_and_base to read and verify. * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. */ for (i = 0; i < NR_AIC_IRQS; i++) { - /* Put irq number in Source Vector Register: */ + /* Put hardware irq number in Source Vector Register: */ at91_aic_write(AT91_AIC_SVR(i), i); /* Active Low interrupt, with the specified priority */ at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - - /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */ - if (i < 8) - at91_aic_write(AT91_AIC_EOICR, 0); } - /* - * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS - * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU - */ - at91_aic_write(AT91_AIC_SPU, NR_AIC_IRQS); - - /* No debugging in AIC: Debug (Protect) Control Register */ - at91_aic_write(AT91_AIC_DCR, 0); - - /* Disable and clear all interrupts initially */ - at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF); - at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); + at91_aic_hw_init(NR_AIC_IRQS); } diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 1606379ac284..f630250c6b87 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -136,7 +136,7 @@ static int at91_pm_verify_clocks(void) unsigned long scsr; int i; - scsr = at91_sys_read(AT91_PMC_SCSR); + scsr = at91_pmc_read(AT91_PMC_SCSR); /* USB must not be using PLLB */ if (cpu_is_at91rm9200()) { @@ -150,11 +150,6 @@ static int at91_pm_verify_clocks(void) pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } - } else if (cpu_is_at91cap9()) { - if ((scsr & AT91CAP9_PMC_UHP) != 0) { - pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); - return 0; - } } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS @@ -165,7 +160,7 @@ static int at91_pm_verify_clocks(void) if ((scsr & (AT91_PMC_PCK0 << i)) == 0) continue; - css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; + css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; if (css != AT91_PMC_CSS_SLOW) { pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); return 0; @@ -193,23 +188,23 @@ int at91_suspend_entering_slow_clock(void) EXPORT_SYMBOL(at91_suspend_entering_slow_clock); -static void (*slow_clock)(void); +static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0, + void __iomem *ramc1, int memctrl); #ifdef CONFIG_AT91_SLOW_CLOCK -extern void at91_slow_clock(void); +extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0, + void __iomem *ramc1, int memctrl); extern u32 at91_slow_clock_sz; #endif - static int at91_pm_enter(suspend_state_t state) { - u32 saved_lpr; at91_gpio_suspend(); at91_irq_suspend(); pr_debug("AT91: PM - wake mask %08x, pm state %d\n", /* remember all the always-wake irqs */ - (at91_sys_read(AT91_PMC_PCSR) + (at91_pmc_read(AT91_PMC_PCSR) | (1 << AT91_ID_FIQ) | (1 << AT91_ID_SYS) | (at91_extern_irq)) @@ -234,11 +229,18 @@ static int at91_pm_enter(suspend_state_t state) * turning off the main oscillator; reverse on wakeup. */ if (slow_clock) { + int memctrl = AT91_MEMCTRL_SDRAMC; + + if (cpu_is_at91rm9200()) + memctrl = AT91_MEMCTRL_MC; + else if (cpu_is_at91sam9g45()) + memctrl = AT91_MEMCTRL_DDRSDR; #ifdef CONFIG_AT91_SLOW_CLOCK /* copy slow_clock handler to SRAM, and call it */ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); #endif - slow_clock(); + slow_clock(at91_pmc_base, at91_ramc_base[0], + at91_ramc_base[1], memctrl); break; } else { pr_info("AT91: PM - no slow clock mode enabled ...\n"); @@ -259,16 +261,7 @@ static int at91_pm_enter(suspend_state_t state) * For ARM 926 based chips, this requirement is weaker * as at91sam9 can access a RAM in self-refresh mode. */ - asm volatile ( "mov r0, #0\n\t" - "b 1f\n\t" - ".align 5\n\t" - "1: mcr p15, 0, r0, c7, c10, 4\n\t" - : /* no output */ - : /* no input */ - : "r0"); - saved_lpr = sdram_selfrefresh_enable(); - wait_for_interrupt_enable(); - sdram_selfrefresh_disable(saved_lpr); + at91_standby(); break; case PM_SUSPEND_ON: @@ -316,7 +309,7 @@ static int __init at91_pm_init(void) #ifdef CONFIG_ARCH_AT91RM9200 /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */ - at91_sys_write(AT91_SDRAMC_LPR, 0); + at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0); #endif suspend_set_ops(&at91_pm_ops); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 7eb40d24242f..89f56f3a802e 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -1,5 +1,19 @@ +/* + * AT91 Power Management + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __ARCH_ARM_MACH_AT91_PM +#define __ARCH_ARM_MACH_AT91_PM + +#include <mach/at91_ramc.h> #ifdef CONFIG_ARCH_AT91RM9200 -#include <mach/at91rm9200_mc.h> +#include <mach/at91rm9200_sdramc.h> /* * The AT91RM9200 goes into self-refresh mode with this command, and will @@ -11,51 +25,37 @@ * still in self-refresh is "not recommended", but seems to work. */ -static inline u32 sdram_selfrefresh_enable(void) +static inline void at91rm9200_standby(void) { - u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); - - at91_sys_write(AT91_SDRAMC_LPR, 0); - at91_sys_write(AT91_SDRAMC_SRR, 1); - return saved_lpr; + u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR); + + asm volatile( + "b 1f\n\t" + ".align 5\n\t" + "1: mcr p15, 0, %0, c7, c10, 4\n\t" + " str %0, [%1, %2]\n\t" + " str %3, [%1, %4]\n\t" + " mcr p15, 0, %0, c7, c0, 4\n\t" + " str %5, [%1, %2]" + : + : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR), + "r" (1), "r" (AT91RM9200_SDRAMC_SRR), + "r" (lpr)); } -#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) -#define wait_for_interrupt_enable() asm volatile ("mcr p15, 0, %0, c7, c0, 4" \ - : : "r" (0)) - -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91sam9_ddrsdr.h> - - -static inline u32 sdram_selfrefresh_enable(void) -{ - u32 saved_lpr, lpr; - - saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR); - - lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); - return saved_lpr; -} - -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr) -#define wait_for_interrupt_enable() cpu_do_idle() +#define at91_standby at91rm9200_standby #elif defined(CONFIG_ARCH_AT91SAM9G45) -#include <mach/at91sam9_ddrsdr.h> /* We manage both DDRAM/SDRAM controllers, we need more than one value to * remember. */ -static u32 saved_lpr1; - -static inline u32 sdram_selfrefresh_enable(void) +static inline void at91sam9g45_standby(void) { - /* Those tow values allow us to delay self-refresh activation + /* Those two values allow us to delay self-refresh activation * to the maximum. */ u32 lpr0, lpr1; - u32 saved_lpr0; + u32 saved_lpr0, saved_lpr1; saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; @@ -69,18 +69,15 @@ static inline u32 sdram_selfrefresh_enable(void) at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); - return saved_lpr0; + cpu_do_idle(); + + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); + at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } -#define sdram_selfrefresh_disable(saved_lpr0) \ - do { \ - at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \ - at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \ - } while (0) -#define wait_for_interrupt_enable() cpu_do_idle() +#define at91_standby at91sam9g45_standby #else -#include <mach/at91sam9_sdramc.h> #ifdef CONFIG_ARCH_AT91SAM9263 /* @@ -90,18 +87,23 @@ static inline u32 sdram_selfrefresh_enable(void) #warning Assuming EB1 SDRAM controller is *NOT* used #endif -static inline u32 sdram_selfrefresh_enable(void) +static inline void at91sam9_standby(void) { u32 saved_lpr, lpr; saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR); lpr = saved_lpr & ~AT91_SDRAMC_LPCB; - at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); - return saved_lpr; + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | + AT91_SDRAMC_LPCB_SELF_REFRESH); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr); } -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr) -#define wait_for_interrupt_enable() cpu_do_idle() +#define at91_standby at91sam9_standby + +#endif #endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 92dfb8461392..db5452123f17 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -15,15 +15,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> #include <mach/at91_pmc.h> - -#if defined(CONFIG_ARCH_AT91RM9200) -#include <mach/at91rm9200_mc.h> -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) -#include <mach/at91sam9_ddrsdr.h> -#else -#include <mach/at91sam9_sdramc.h> -#endif +#include <mach/at91_ramc.h> #ifdef CONFIG_ARCH_AT91SAM9263 @@ -47,17 +39,23 @@ #define PLLALOCK_TIMEOUT 1000 #define PLLBLOCK_TIMEOUT 1000 +pmc .req r0 +sdramc .req r1 +ramc1 .req r2 +memctrl .req r3 +tmp1 .req r4 +tmp2 .req r5 /* * Wait until master clock is ready (after switching master clock source) */ .macro wait_mckrdy - mov r4, #MCKRDY_TIMEOUT -1: sub r4, r4, #1 - cmp r4, #0 + mov tmp2, #MCKRDY_TIMEOUT +1: sub tmp2, tmp2, #1 + cmp tmp2, #0 beq 2f - ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] - tst r3, #AT91_PMC_MCKRDY + ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MCKRDY beq 1b 2: .endm @@ -66,12 +64,12 @@ * Wait until master oscillator has stabilized. */ .macro wait_moscrdy - mov r4, #MOSCRDY_TIMEOUT -1: sub r4, r4, #1 - cmp r4, #0 + mov tmp2, #MOSCRDY_TIMEOUT +1: sub tmp2, tmp2, #1 + cmp tmp2, #0 beq 2f - ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] - tst r3, #AT91_PMC_MOSCS + ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCS beq 1b 2: .endm @@ -80,12 +78,12 @@ * Wait until PLLA has locked. */ .macro wait_pllalock - mov r4, #PLLALOCK_TIMEOUT -1: sub r4, r4, #1 - cmp r4, #0 + mov tmp2, #PLLALOCK_TIMEOUT +1: sub tmp2, tmp2, #1 + cmp tmp2, #0 beq 2f - ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] - tst r3, #AT91_PMC_LOCKA + ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKA beq 1b 2: .endm @@ -94,80 +92,98 @@ * Wait until PLLB has locked. */ .macro wait_pllblock - mov r4, #PLLBLOCK_TIMEOUT -1: sub r4, r4, #1 - cmp r4, #0 + mov tmp2, #PLLBLOCK_TIMEOUT +1: sub tmp2, tmp2, #1 + cmp tmp2, #0 beq 2f - ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] - tst r3, #AT91_PMC_LOCKB + ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKB beq 1b 2: .endm .text +/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, + * void __iomem *ramc1, int memctrl) + */ ENTRY(at91_slow_clock) /* Save registers on stack */ - stmfd sp!, {r0 - r12, lr} + stmfd sp!, {r4 - r12, lr} /* * Register usage: - * R1 = Base address of AT91_PMC - * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) - * R3 = temporary register + * R0 = Base address of AT91_PMC + * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * R2 = Base address of second RAM Controller or 0 if not present + * R3 = Memory controller * R4 = temporary register - * R5 = Base address of second RAM Controller or 0 if not present + * R5 = temporary register */ - ldr r1, .at91_va_base_pmc - ldr r2, .at91_va_base_sdramc - ldr r5, .at91_va_base_ramc1 /* Drain write buffer */ - mov r0, #0 - mcr p15, 0, r0, c7, c10, 4 + mov tmp1, #0 + mcr p15, 0, tmp1, c7, c10, 4 + + cmp memctrl, #AT91_MEMCTRL_MC + bne ddr_sr_enable -#ifdef CONFIG_ARCH_AT91RM9200 + /* + * at91rm9200 Memory controller + */ /* Put SDRAM in self-refresh mode */ - mov r3, #1 - str r3, [r2, #AT91_SDRAMC_SRR] -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) + mov tmp1, #1 + str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR] + b sdr_sr_done + + /* + * DDRSDR Memory controller + */ +ddr_sr_enable: + cmp memctrl, #AT91_MEMCTRL_DDRSDR + bne sdr_sr_enable /* prepare for DDRAM self-refresh mode */ - ldr r3, [r2, #AT91_DDRSDRC_LPR] - str r3, .saved_sam9_lpr - bic r3, #AT91_DDRSDRC_LPCB - orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR] + str tmp1, .saved_sam9_lpr + bic tmp1, #AT91_DDRSDRC_LPCB + orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH /* figure out if we use the second ram controller */ - cmp r5, #0 - ldrne r4, [r5, #AT91_DDRSDRC_LPR] - strne r4, .saved_sam9_lpr1 - bicne r4, #AT91_DDRSDRC_LPCB - orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH + cmp ramc1, #0 + ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR] + strne tmp2, .saved_sam9_lpr1 + bicne tmp2, #AT91_DDRSDRC_LPCB + orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH /* Enable DDRAM self-refresh mode */ - str r3, [r2, #AT91_DDRSDRC_LPR] - strne r4, [r5, #AT91_DDRSDRC_LPR] -#else + str tmp1, [sdramc, #AT91_DDRSDRC_LPR] + strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] + + b sdr_sr_done + + /* + * SDRAMC Memory controller + */ +sdr_sr_enable: /* Enable SDRAM self-refresh mode */ - ldr r3, [r2, #AT91_SDRAMC_LPR] - str r3, .saved_sam9_lpr + ldr tmp1, [sdramc, #AT91_SDRAMC_LPR] + str tmp1, .saved_sam9_lpr - bic r3, #AT91_SDRAMC_LPCB - orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_SDRAMC_LPR] -#endif + bic tmp1, #AT91_SDRAMC_LPCB + orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH + str tmp1, [sdramc, #AT91_SDRAMC_LPR] +sdr_sr_done: /* Save Master clock setting */ - ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] - str r3, .saved_mckr + ldr tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, .saved_mckr /* * Set the Master clock source to slow clock */ - bic r3, r3, #AT91_PMC_CSS - str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy @@ -177,61 +193,61 @@ ENTRY(at91_slow_clock) * * See AT91RM9200 errata #27 and #28 for details. */ - mov r3, #0 - str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] + mov tmp1, #0 + str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy #endif /* Save PLLA setting and disable it */ - ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] - str r3, .saved_pllar + ldr tmp1, [pmc, #AT91_CKGR_PLLAR] + str tmp1, .saved_pllar - mov r3, #AT91_PMC_PLLCOUNT - orr r3, r3, #(1 << 29) /* bit 29 always set */ - str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] + mov tmp1, #AT91_PMC_PLLCOUNT + orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ + str tmp1, [pmc, #AT91_CKGR_PLLAR] /* Save PLLB setting and disable it */ - ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] - str r3, .saved_pllbr + ldr tmp1, [pmc, #AT91_CKGR_PLLBR] + str tmp1, .saved_pllbr - mov r3, #AT91_PMC_PLLCOUNT - str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] + mov tmp1, #AT91_PMC_PLLCOUNT + str tmp1, [pmc, #AT91_CKGR_PLLBR] /* Turn off the main oscillator */ - ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] - bic r3, r3, #AT91_PMC_MOSCEN - str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + str tmp1, [pmc, #AT91_CKGR_MOR] /* Wait for interrupt */ - mcr p15, 0, r0, c7, c0, 4 + mcr p15, 0, tmp1, c7, c0, 4 /* Turn on the main oscillator */ - ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] - orr r3, r3, #AT91_PMC_MOSCEN - str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + str tmp1, [pmc, #AT91_CKGR_MOR] wait_moscrdy /* Restore PLLB setting */ - ldr r3, .saved_pllbr - str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] + ldr tmp1, .saved_pllbr + str tmp1, [pmc, #AT91_CKGR_PLLBR] - tst r3, #(AT91_PMC_MUL & 0xff0000) + tst tmp1, #(AT91_PMC_MUL & 0xff0000) bne 1f - tst r3, #(AT91_PMC_MUL & ~0xff0000) + tst tmp1, #(AT91_PMC_MUL & ~0xff0000) beq 2f 1: wait_pllblock 2: /* Restore PLLA setting */ - ldr r3, .saved_pllar - str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] + ldr tmp1, .saved_pllar + str tmp1, [pmc, #AT91_CKGR_PLLAR] - tst r3, #(AT91_PMC_MUL & 0xff0000) + tst tmp1, #(AT91_PMC_MUL & 0xff0000) bne 3f - tst r3, #(AT91_PMC_MUL & ~0xff0000) + tst tmp1, #(AT91_PMC_MUL & ~0xff0000) beq 4f 3: wait_pllalock @@ -244,11 +260,11 @@ ENTRY(at91_slow_clock) * * See AT91RM9200 errata #27 and #28 for details. */ - ldr r3, .saved_mckr - tst r3, #AT91_PMC_PRES + ldr tmp1, .saved_mckr + tst tmp1, #AT91_PMC_PRES beq 2f - and r3, r3, #AT91_PMC_PRES - str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] + and tmp1, tmp1, #AT91_PMC_PRES + str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy #endif @@ -256,32 +272,45 @@ ENTRY(at91_slow_clock) /* * Restore master clock setting */ -2: ldr r3, .saved_mckr - str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] +2: ldr tmp1, .saved_mckr + str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy -#ifdef CONFIG_ARCH_AT91RM9200 - /* Do nothing - self-refresh is automatically disabled. */ -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) + /* + * at91rm9200 Memory controller + * Do nothing - self-refresh is automatically disabled. + */ + cmp memctrl, #AT91_MEMCTRL_MC + beq ram_restored + + /* + * DDRSDR Memory controller + */ + cmp memctrl, #AT91_MEMCTRL_DDRSDR + bne sdr_en_restore /* Restore LPR on AT91 with DDRAM */ - ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_DDRSDRC_LPR] + ldr tmp1, .saved_sam9_lpr + str tmp1, [sdramc, #AT91_DDRSDRC_LPR] /* if we use the second ram controller */ - cmp r5, #0 - ldrne r4, .saved_sam9_lpr1 - strne r4, [r5, #AT91_DDRSDRC_LPR] + cmp ramc1, #0 + ldrne tmp2, .saved_sam9_lpr1 + strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] + + b ram_restored -#else + /* + * SDRAMC Memory controller + */ +sdr_en_restore: /* Restore LPR on AT91 with SDRAM */ - ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_SDRAMC_LPR] -#endif + ldr tmp1, .saved_sam9_lpr + str tmp1, [sdramc, #AT91_SDRAMC_LPR] +ram_restored: /* Restore registers, and return */ - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r4 - r12, pc} .saved_mckr: @@ -299,27 +328,5 @@ ENTRY(at91_slow_clock) .saved_sam9_lpr1: .word 0 -.at91_va_base_pmc: - .word AT91_VA_BASE_SYS + AT91_PMC - -#ifdef CONFIG_ARCH_AT91RM9200 -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 -#else -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_SDRAMC0 -#endif - -.at91_va_base_ramc1: -#if defined(CONFIG_ARCH_AT91SAM9G45) - .word AT91_VA_BASE_SYS + AT91_DDRSDRC1 -#else - .word 0 -#endif - ENTRY(at91_slow_clock_sz) .word .-at91_slow_clock diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 69d3fc4c46f3..1083739e3065 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -9,6 +9,7 @@ #include <linux/io.h> #include <linux/mm.h> #include <linux/pm.h> +#include <linux/of_address.h> #include <asm/mach/map.h> @@ -51,6 +52,19 @@ void __init at91_init_interrupts(unsigned int *priority) at91_gpio_irq_setup(); } +void __iomem *at91_ramc_base[2]; + +void __init at91_ioremap_ramc(int id, u32 addr, u32 size) +{ + if (id < 0 || id > 1) { + pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id); + BUG(); + } + at91_ramc_base[id] = ioremap(addr, size); + if (!at91_ramc_base[id]) + panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr); +} + static struct map_desc sram_desc[2] __initdata; void __init at91_init_sram(int bank, unsigned long base, unsigned int length) @@ -86,20 +100,6 @@ static void __init soc_detect(u32 dbgu_base) socid = cidr & ~AT91_CIDR_VERSION; switch (socid) { - case ARCH_ID_AT91CAP9: { -#ifdef CONFIG_AT91_PMC_UNIT - u32 pmc_ver = at91_sys_read(AT91_PMC_VER); - - if (pmc_ver == ARCH_REVISION_CAP9_B) - at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B; - else if (pmc_ver == ARCH_REVISION_CAP9_C) - at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C; -#endif - at91_soc_initdata.type = AT91_SOC_CAP9; - at91_boot_soc = at91cap9_soc; - break; - } - case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; at91_boot_soc = at91rm9200_soc; @@ -200,7 +200,6 @@ static void __init soc_detect(u32 dbgu_base) static const char *soc_name[] = { [AT91_SOC_RM9200] = "at91rm9200", - [AT91_SOC_CAP9] = "at91cap9", [AT91_SOC_SAM9260] = "at91sam9260", [AT91_SOC_SAM9261] = "at91sam9261", [AT91_SOC_SAM9263] = "at91sam9263", @@ -221,8 +220,6 @@ EXPORT_SYMBOL(at91_get_soc_type); static const char *soc_subtype_name[] = { [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", - [AT91_SOC_CAP9_REV_B] = "at91cap9 revB", - [AT91_SOC_CAP9_REV_C] = "at91cap9 revC", [AT91_SOC_SAM9XE] = "at91sam9xe", [AT91_SOC_SAM9G45ES] = "at91sam9g45es", [AT91_SOC_SAM9M10] = "at91sam9m10", @@ -293,6 +290,159 @@ void __init at91_ioremap_rstc(u32 base_addr) panic("Impossible to ioremap at91_rstc_base\n"); } +void __iomem *at91_matrix_base; + +void __init at91_ioremap_matrix(u32 base_addr) +{ + at91_matrix_base = ioremap(base_addr, 512); + if (!at91_matrix_base) + panic("Impossible to ioremap at91_matrix_base\n"); +} + +#if defined(CONFIG_OF) +static struct of_device_id rstc_ids[] = { + { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart }, + { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, + { /*sentinel*/ } +}; + +static void at91_dt_rstc(void) +{ + struct device_node *np; + const struct of_device_id *of_id; + + np = of_find_matching_node(NULL, rstc_ids); + if (!np) + panic("unable to find compatible rstc node in dtb\n"); + + at91_rstc_base = of_iomap(np, 0); + if (!at91_rstc_base) + panic("unable to map rstc cpu registers\n"); + + of_id = of_match_node(rstc_ids, np); + if (!of_id) + panic("AT91: rtsc no restart function availlable\n"); + + arm_pm_restart = of_id->data; + + of_node_put(np); +} + +static struct of_device_id ramc_ids[] = { + { .compatible = "atmel,at91sam9260-sdramc" }, + { .compatible = "atmel,at91sam9g45-ddramc" }, + { /*sentinel*/ } +}; + +static void at91_dt_ramc(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, ramc_ids); + if (!np) + panic("unable to find compatible ram conroller node in dtb\n"); + + at91_ramc_base[0] = of_iomap(np, 0); + if (!at91_ramc_base[0]) + panic("unable to map ramc[0] cpu registers\n"); + /* the controller may have 2 banks */ + at91_ramc_base[1] = of_iomap(np, 1); + + of_node_put(np); +} + +static struct of_device_id shdwc_ids[] = { + { .compatible = "atmel,at91sam9260-shdwc", }, + { .compatible = "atmel,at91sam9rl-shdwc", }, + { .compatible = "atmel,at91sam9x5-shdwc", }, + { /*sentinel*/ } +}; + +static const char *shdwc_wakeup_modes[] = { + [AT91_SHDW_WKMODE0_NONE] = "none", + [AT91_SHDW_WKMODE0_HIGH] = "high", + [AT91_SHDW_WKMODE0_LOW] = "low", + [AT91_SHDW_WKMODE0_ANYLEVEL] = "any", +}; + +const int at91_dtget_shdwc_wakeup_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "atmel,wakeup-mode", &pm); + if (err < 0) + return AT91_SHDW_WKMODE0_ANYLEVEL; + + for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++) + if (!strcasecmp(pm, shdwc_wakeup_modes[i])) + return i; + + return -ENODEV; +} + +static void at91_dt_shdwc(void) +{ + struct device_node *np; + int wakeup_mode; + u32 reg; + u32 mode = 0; + + np = of_find_matching_node(NULL, shdwc_ids); + if (!np) { + pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n"); + return; + } + + at91_shdwc_base = of_iomap(np, 0); + if (!at91_shdwc_base) + panic("AT91: unable to map shdwc cpu registers\n"); + + wakeup_mode = at91_dtget_shdwc_wakeup_mode(np); + if (wakeup_mode < 0) { + pr_warn("AT91: shdwc unknown wakeup mode\n"); + goto end; + } + + if (!of_property_read_u32(np, "atmel,wakeup-counter", ®)) { + if (reg > AT91_SHDW_CPTWK0_MAX) { + pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n", + reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX); + reg = AT91_SHDW_CPTWK0_MAX; + } + mode |= AT91_SHDW_CPTWK0_(reg); + } + + if (of_property_read_bool(np, "atmel,wakeup-rtc-timer")) + mode |= AT91_SHDW_RTCWKEN; + + if (of_property_read_bool(np, "atmel,wakeup-rtt-timer")) + mode |= AT91_SHDW_RTTWKEN; + + at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode); + +end: + pm_power_off = at91sam9_poweroff; + + of_node_put(np); +} + +void __init at91_dt_initialize(void) +{ + at91_dt_rstc(); + at91_dt_ramc(); + at91_dt_shdwc(); + + /* Init clock subsystem */ + at91_dt_clock_init(); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} +#endif + void __init at91_initialize(unsigned long main_clock) { at91_boot_soc.ioremap_registers(); diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 4588ae6f7acd..5db4aa45404a 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -13,7 +13,6 @@ struct at91_init_soc { }; extern struct at91_init_soc at91_boot_soc; -extern struct at91_init_soc at91cap9_soc; extern struct at91_init_soc at91rm9200_soc; extern struct at91_init_soc at91sam9260_soc; extern struct at91_init_soc at91sam9261_soc; @@ -27,10 +26,6 @@ static inline int at91_soc_is_enabled(void) return at91_boot_soc.init != NULL; } -#if !defined(CONFIG_ARCH_AT91CAP9) -#define at91cap9_soc at91_boot_soc -#endif - #if !defined(CONFIG_ARCH_AT91RM9200) #define at91rm9200_soc at91_boot_soc #endif diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 6b67b7e8426c..22e4e0a28ad1 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,27 +52,8 @@ #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> -#define AMBA_DEVICE(name, initname, base, plat, size) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = initname, \ - .platform_data = plat \ - }, \ - .res = { \ - .start = MM_ADDR_IO_##base, \ - .end = MM_ADDR_IO_##base + (size) - 1, \ - .flags = IORESOURCE_MEM \ - }, \ - .dma_mask = ~0, \ - .irq = { \ - IRQ_##base \ - } \ -} - - -AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K); -AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K); +static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); +static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S index 94c950d783ba..2f316f0e6e69 100644 --- a/arch/arm/mach-bcmring/include/mach/entry-macro.S +++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S @@ -21,9 +21,6 @@ #include <mach/hardware.h> #include <mach/csp/mm_io.h> - .macro disable_fiq - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \base, =(MM_IO_BASE_INTC0) ldr \irqstat, [\base, #0] @ get status @@ -77,6 +74,3 @@ .macro get_irqnr_preamble, base, tmp .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h deleted file mode 100644 index cb78250db649..000000000000 --- a/arch/arm/mach-bcmring/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index ab1711b9b4d6..3c5b5bbf24e5 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -37,6 +37,7 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/clps7111.h> +#include <asm/system_misc.h> /* * This maps the generic CLPS711x registers @@ -225,3 +226,19 @@ void clps711x_restart(char mode, const char *cmd) { soft_restart(0); } + +static void clps711x_idle(void) +{ + clps_writel(1, HALT); + __asm__ __volatile__( + "mov r0, r0\n\ + mov r0, r0"); +} + +static int __init clps711x_idle_init(void) +{ + arm_pm_idle = clps711x_idle; + return 0; +} + +arch_initcall(clps711x_idle_init); diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S index 90fa2f70489f..125af59d7a29 100644 --- a/arch/arm/mach-clps711x/include/mach/entry-macro.S +++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S @@ -10,15 +10,9 @@ #include <mach/hardware.h> #include <asm/hardware/clps7111.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - #if (INTSR2 - INTSR1) != (INTMR2 - INTMR1) #error INTSR stride != INTMR stride #endif diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h deleted file mode 100644 index 23d6ef8c84da..000000000000 --- a/arch/arm/mach-clps711x/include/mach/system.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/system.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/hardware/clps7111.h> - -static inline void arch_idle(void) -{ - clps_writel(1, HALT); - __asm__ __volatile__( - "mov r0, r0\n\ - mov r0, r0"); -} - -#endif diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c index 15121446efc8..dd9a6cdbeb02 100644 --- a/arch/arm/mach-clps711x/p720t-leds.c +++ b/arch/arm/mach-clps711x/p720t-leds.c @@ -25,7 +25,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <asm/hardware/clps7111.h> diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S deleted file mode 100644 index 01c57df5f716..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Low-level IRQ helper macros for Cavium Networks platforms - * - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h deleted file mode 100644 index 9e56b7dc133a..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright 2000 Deep Blue Solutions Ltd - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <asm/proc-fns.h> - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index e159d69967c9..79d001f831e0 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -155,8 +155,8 @@ static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys) BUG_ON(request_resource(&iomem_resource, res_io) || request_resource(&iomem_resource, res_mem)); - pci_add_resource(&sys->resources, res_io); - pci_add_resource(&sys->resources, res_mem); + pci_add_resource_offset(&sys->resources, res_io, sys->io_offset); + pci_add_resource_offset(&sys->resources, res_mem, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index d5088900af6c..a70de24d1cbc 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -36,6 +36,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 275341f159fb..82ed753fb360 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -26,13 +26,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm355.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> #include <mach/usb.h> +#include "davinci.h" + /* NOTE: this is geared for the standard config, with a socketed * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you * swap chips, maybe with a different block size, partitioning may diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index e99db28181ae..d74a8b3445fb 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -23,13 +23,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm355.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> #include <mach/usb.h> +#include "davinci.h" + /* NOTE: this is geared for the standard config, with a socketed * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you * swap chips, maybe with a different block size, partitioning may diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 849311d3cb7c..5bce2b83bb4f 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <mach/mux.h> -#include <mach/dm365.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> @@ -42,6 +41,8 @@ #include <media/tvp514x.h> +#include "davinci.h" + static inline int have_imager(void) { /* REVISIT when it's supported, trigger via Kconfig */ diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 1247ecdcf752..3683306e0245 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -30,7 +30,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> @@ -40,6 +39,8 @@ #include <mach/usb.h> #include <mach/aemif.h> +#include "davinci.h" + #define DM644X_EVM_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) @@ -189,7 +190,7 @@ static struct platform_device davinci_fb_device = { .num_resources = 0, }; -static struct tvp514x_platform_data tvp5146_pdata = { +static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = { .clk_polarity = 0, .hs_polarity = 1, .vs_polarity = 1 @@ -197,7 +198,7 @@ static struct tvp514x_platform_data tvp5146_pdata = { #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) /* Inputs available at the TVP5146 */ -static struct v4l2_input tvp5146_inputs[] = { +static struct v4l2_input dm644xevm_tvp5146_inputs[] = { { .index = 0, .name = "Composite", @@ -217,7 +218,7 @@ static struct v4l2_input tvp5146_inputs[] = { * ouput that goes to vpfe. There is a one to one correspondence * with tvp5146_inputs */ -static struct vpfe_route tvp5146_routes[] = { +static struct vpfe_route dm644xevm_tvp5146_routes[] = { { .input = INPUT_CVBS_VI2B, .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, @@ -228,13 +229,13 @@ static struct vpfe_route tvp5146_routes[] = { }, }; -static struct vpfe_subdev_info vpfe_sub_devs[] = { +static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = { { .name = "tvp5146", .grp_id = 0, - .num_inputs = ARRAY_SIZE(tvp5146_inputs), - .inputs = tvp5146_inputs, - .routes = tvp5146_routes, + .num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs), + .inputs = dm644xevm_tvp5146_inputs, + .routes = dm644xevm_tvp5146_routes, .can_route = 1, .ccdc_if_params = { .if_type = VPFE_BT656, @@ -243,15 +244,15 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = { }, .board_info = { I2C_BOARD_INFO("tvp5146", 0x5d), - .platform_data = &tvp5146_pdata, + .platform_data = &dm644xevm_tvp5146_pdata, }, }, }; -static struct vpfe_config vpfe_cfg = { - .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), +static struct vpfe_config dm644xevm_capture_cfg = { + .num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs), .i2c_adapter_id = 1, - .sub_devs = vpfe_sub_devs, + .sub_devs = dm644xevm_vpfe_sub_devs, .card_name = "DM6446 EVM", .ccdc = "DM6446 CCDC", }; @@ -612,6 +613,113 @@ static void __init evm_init_i2c(void) i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } +#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +/* venc standard timings */ +static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { + { + .name = "ntsc", + .timings_type = VPBE_ENC_STD, + .timings = {V4L2_STD_525_60}, + .interlaced = 1, + .xres = 720, + .yres = 480, + .aspect = {11, 10}, + .fps = {30000, 1001}, + .left_margin = 0x79, + .upper_margin = 0x10, + }, + { + .name = "pal", + .timings_type = VPBE_ENC_STD, + .timings = {V4L2_STD_625_50}, + .interlaced = 1, + .xres = 720, + .yres = 576, + .aspect = {54, 59}, + .fps = {25, 1}, + .left_margin = 0x7e, + .upper_margin = 0x16, + }, +}; + +/* venc dv preset timings */ +static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { + { + .name = "480p59_94", + .timings_type = VPBE_ENC_DV_PRESET, + .timings = {V4L2_DV_480P59_94}, + .interlaced = 0, + .xres = 720, + .yres = 480, + .aspect = {1, 1}, + .fps = {5994, 100}, + .left_margin = 0x80, + .upper_margin = 0x20, + }, + { + .name = "576p50", + .timings_type = VPBE_ENC_DV_PRESET, + .timings = {V4L2_DV_576P50}, + .interlaced = 0, + .xres = 720, + .yres = 576, + .aspect = {1, 1}, + .fps = {50, 1}, + .left_margin = 0x7e, + .upper_margin = 0x30, + }, +}; + +/* + * The outputs available from VPBE + encoders. Keep the order same + * as that of encoders. First those from venc followed by that from + * encoders. Index in the output refers to index on a particular encoder. + * Driver uses this index to pass it to encoder when it supports more + * than one output. Userspace applications use index of the array to + * set an output. + */ +static struct vpbe_output dm644xevm_vpbe_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = VENC_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + .subdev_name = VPBE_VENC_SUBDEV_NAME, + .default_mode = "ntsc", + .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing), + .modes = dm644xevm_enc_std_timing, + }, + { + .output = { + .index = 1, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_PRESETS, + }, + .subdev_name = VPBE_VENC_SUBDEV_NAME, + .default_mode = "480p59_94", + .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing), + .modes = dm644xevm_enc_preset_timing, + }, +}; + +static struct vpbe_config dm644xevm_display_cfg = { + .module_name = "dm644x-vpbe-display", + .i2c_adapter_id = 1, + .osd = { + .module_name = VPBE_OSD_SUBDEV_NAME, + }, + .venc = { + .module_name = VPBE_VENC_SUBDEV_NAME, + }, + .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs), + .outputs = dm644xevm_vpbe_outputs, +}; + static struct platform_device *davinci_evm_devices[] __initdata = { &davinci_fb_device, &rtc_dev, @@ -624,8 +732,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init davinci_evm_map_io(void) { - /* setup input configuration for VPFE input devices */ - dm644x_set_vpfe_config(&vpfe_cfg); dm644x_init(); } @@ -697,6 +803,7 @@ static __init void davinci_evm_init(void) evm_init_i2c(); davinci_setup_mmc(0, &dm6446evm_mmc_config); + dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg); davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_evm_snd_data); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 872ac69fa049..d72ab948d630 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -36,7 +36,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm646x.h> #include <mach/common.h> #include <mach/serial.h> #include <mach/i2c.h> @@ -45,6 +44,7 @@ #include <mach/cdce949.h> #include <mach/aemif.h> +#include "davinci.h" #include "clock.h" #define NAND_BLOCK_SIZE SZ_128K @@ -410,8 +410,6 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; -#define VIDCLKCTL_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x38) -#define VSCLKDIS_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x6c) #define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8)) #define VCH2CLK_SYSCLK8 (BIT(9)) #define VCH2CLK_AUXCLK (BIT(9) | BIT(8)) @@ -429,8 +427,6 @@ static struct davinci_i2c_platform_data i2c_pdata = { #define TVP5147_CH0 "tvp514x-0" #define TVP5147_CH1 "tvp514x-1" -static void __iomem *vpif_vidclkctl_reg; -static void __iomem *vpif_vsclkdis_reg; /* spin lock for updating above registers */ static spinlock_t vpif_reg_lock; @@ -441,14 +437,14 @@ static int set_vpif_clock(int mux_mode, int hd) int val = 0; int err = 0; - if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client) + if (!cpld_client) return -ENXIO; /* disable the clock */ spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); value |= (VIDCH3CLK | VIDCH2CLK); - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); spin_unlock_irqrestore(&vpif_reg_lock, flags); val = i2c_smbus_read_byte(cpld_client); @@ -464,7 +460,7 @@ static int set_vpif_clock(int mux_mode, int hd) if (err) return err; - value = __raw_readl(vpif_vidclkctl_reg); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); value &= ~(VCH2CLK_MASK); value &= ~(VCH3CLK_MASK); @@ -473,13 +469,13 @@ static int set_vpif_clock(int mux_mode, int hd) else value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK); - __raw_writel(value, vpif_vidclkctl_reg); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); /* enable the clock */ value &= ~(VIDCH3CLK | VIDCH2CLK); - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); spin_unlock_irqrestore(&vpif_reg_lock, flags); return 0; @@ -564,7 +560,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) int val; u32 value; - if (!vpif_vidclkctl_reg || !cpld_client) + if (!cpld_client) return -ENXIO; val = i2c_smbus_read_byte(cpld_client); @@ -572,7 +568,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) return val; spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vidclkctl_reg); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); if (mux_mode) { val &= VPIF_INPUT_TWO_CHANNEL; value |= VIDCH1CLK; @@ -580,7 +576,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) val |= VPIF_INPUT_ONE_CHANNEL; value &= ~VIDCH1CLK; } - __raw_writel(value, vpif_vidclkctl_reg); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); spin_unlock_irqrestore(&vpif_reg_lock, flags); err = i2c_smbus_write_byte(cpld_client, val); @@ -674,12 +670,6 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = { static void __init evm_init_video(void) { - vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4); - vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4); - if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) { - pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n"); - return; - } spin_lock_init(&vpif_reg_lock); dm646x_setup_vpif(&dm646x_vpif_display_config, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 8d34f513d415..a772bb45570a 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -30,7 +30,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> @@ -39,6 +38,8 @@ #include <mach/mmc.h> #include <mach/usb.h> +#include "davinci.h" + #define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 31da3c5b2ba3..76e675096104 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -35,13 +35,14 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/mux.h> #include <mach/usb.h> +#include "davinci.h" + #define SFFSDR_PHY_ID "davinci_mdio-0:01" static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 5bba7070f271..031048fec9f5 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -95,7 +95,7 @@ static int davinci_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return ret; - dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); + dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); ret = cpufreq_frequency_table_target(policy, pdata->freq_table, freqs.new, relation, &idx); diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 992c4c410185..b44dc844e15e 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1026,7 +1026,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate) } #endif -int da850_register_pm(struct platform_device *pdev) +int __init da850_register_pm(struct platform_device *pdev) { int ret; struct davinci_pm_config *pdata = pdev->dev.platform_data; diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h new file mode 100644 index 000000000000..3e519dad5bb9 --- /dev/null +++ b/arch/arm/mach-davinci/davinci.h @@ -0,0 +1,102 @@ +/* + * This file contains the processor specific definitions + * of the TI DM644x, DM355, DM365, and DM646x. + * + * Copyright (C) 2011 Texas Instruments Incorporated + * Copyright (c) 2007 Deep Root Systems, LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __DAVINCI_H +#define __DAVINCI_H + +#include <linux/clk.h> +#include <linux/videodev2.h> +#include <linux/davinci_emac.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <mach/asp.h> +#include <mach/keyscan.h> +#include <mach/hardware.h> + +#include <media/davinci/vpfe_capture.h> +#include <media/davinci/vpif_types.h> +#include <media/davinci/vpss.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe_venc.h> +#include <media/davinci/vpbe.h> +#include <media/davinci/vpbe_osd.h> + +#define DAVINCI_SYSTEM_MODULE_BASE 0x01c40000 +#define SYSMOD_VIDCLKCTL 0x38 +#define SYSMOD_VPSS_CLKCTL 0x44 +#define SYSMOD_VDD3P3VPWDN 0x48 +#define SYSMOD_VSCLKDIS 0x6c +#define SYSMOD_PUPDCTL1 0x7c + +extern void __iomem *davinci_sysmod_base; +#define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x)) +void davinci_map_sysmod(void); + +/* DM355 base addresses */ +#define DM355_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +#define ASP1_TX_EVT_EN 1 +#define ASP1_RX_EVT_EN 2 + +/* DM365 base addresses */ +#define DM365_ASYNC_EMIF_CONTROL_BASE 0x01d10000 +#define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 + +/* DM644x base addresses */ +#define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 + +/* DM646x base addresses */ +#define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000 +#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000 + +/* DM355 function declarations */ +void __init dm355_init(void); +void dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len); +void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); +void dm355_set_vpfe_config(struct vpfe_config *cfg); + +/* DM365 function declarations */ +void __init dm365_init(void); +void __init dm365_init_asp(struct snd_platform_data *pdata); +void __init dm365_init_vc(struct snd_platform_data *pdata); +void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); +void __init dm365_init_rtc(void); +void dm365_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len); +void dm365_set_vpfe_config(struct vpfe_config *cfg); + +/* DM644x function declarations */ +void __init dm644x_init(void); +void __init dm644x_init_asp(struct snd_platform_data *pdata); +int __init dm644x_init_video(struct vpfe_config *, struct vpbe_config *); + +/* DM646x function declarations */ +void __init dm646x_init(void); +void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); +void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); +int __init dm646x_init_edma(struct edma_rsv_info *rsv); +void dm646x_video_init(void); +void dm646x_setup_vpif(struct vpif_display_config *, + struct vpif_capture_config *); +#endif /*__DAVINCI_H */ diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 50c0156b4262..d2f9666284a7 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -23,6 +23,7 @@ #include <mach/mmc.h> #include <mach/time.h> +#include "davinci.h" #include "clock.h" #define DAVINCI_I2C_BASE 0x01C21000 @@ -33,8 +34,19 @@ #define DM365_MMCSD0_BASE 0x01D11000 #define DM365_MMCSD1_BASE 0x01D00000 -/* System control register offsets */ -#define DM64XX_VDD3P3V_PWDN 0x48 +void __iomem *davinci_sysmod_base; + +void davinci_map_sysmod(void) +{ + davinci_sysmod_base = ioremap_nocache(DAVINCI_SYSTEM_MODULE_BASE, + 0x800); + /* + * Throw a bug since a lot of board initialization code depends + * on system module availability. ioremap() failing this early + * need careful looking into anyway. + */ + BUG_ON(!davinci_sysmod_base); +} static struct resource i2c_resources[] = { { @@ -212,12 +224,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) davinci_cfg_reg(DM355_SD1_DATA2); davinci_cfg_reg(DM355_SD1_DATA3); } else if (cpu_is_davinci_dm365()) { - void __iomem *pupdctl1 = - IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c); - /* Configure pull down control */ - __raw_writel((__raw_readl(pupdctl1) & ~0xfc0), - pupdctl1); + unsigned v; + + v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1)); + __raw_writel(v & ~0xfc0, + DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1)); mmcsd1_resources[0].start = DM365_MMCSD1_BASE; mmcsd1_resources[0].end = DM365_MMCSD1_BASE + @@ -246,11 +258,9 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0; } else if (cpu_is_davinci_dm644x()) { /* REVISIT: should this be in board-init code? */ - void __iomem *base = - IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); - /* Power-on 3.3V IO cells */ - __raw_writel(0, base + DM64XX_VDD3P3V_PWDN); + __raw_writel(0, + DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); /*Set up the pull regiter for MMC */ davinci_cfg_reg(DM644X_MSTK); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 19667cfc5de0..fd3d09aa6cde 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -18,7 +18,6 @@ #include <asm/mach/map.h> -#include <mach/dm355.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/psc.h> @@ -31,6 +30,7 @@ #include <mach/spi.h> #include <mach/gpio-davinci.h> +#include "davinci.h" #include "clock.h" #include "mux.h" @@ -871,6 +871,7 @@ void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata) void __init dm355_init(void) { davinci_common_init(&davinci_soc_info_dm355); + davinci_map_sysmod(); } static int __init dm355_init_devices(void) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index f15b435cc655..1a2e953082b3 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -21,7 +21,6 @@ #include <asm/mach/map.h> -#include <mach/dm365.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/psc.h> @@ -35,11 +34,28 @@ #include <mach/spi.h> #include <mach/gpio-davinci.h> +#include "davinci.h" #include "clock.h" #include "mux.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ +/* Base of key scan register bank */ +#define DM365_KEYSCAN_BASE 0x01c69400 + +#define DM365_RTC_BASE 0x01c69000 + +#define DAVINCI_DM365_VC_BASE 0x01d0c000 +#define DAVINCI_DMA_VC_TX 2 +#define DAVINCI_DMA_VC_RX 3 + +#define DM365_EMAC_BASE 0x01d07000 +#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) +#define DM365_EMAC_CNTRL_OFFSET 0x0000 +#define DM365_EMAC_CNTRL_MOD_OFFSET 0x3000 +#define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000 +#define DM365_EMAC_CNTRL_RAM_SIZE 0x2000 + static struct pll_data pll1_data = { .num = 1, .phys_base = DAVINCI_PLL1_BASE, @@ -1122,6 +1138,7 @@ void __init dm365_init_rtc(void) void __init dm365_init(void) { davinci_common_init(&davinci_soc_info_dm365); + davinci_map_sysmod(); } static struct resource dm365_vpss_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 43a48ee1917b..c8b866657fcb 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -15,7 +15,6 @@ #include <asm/mach/map.h> -#include <mach/dm644x.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/irqs.h> @@ -27,6 +26,7 @@ #include <mach/asp.h> #include <mach/gpio-davinci.h> +#include "davinci.h" #include "clock.h" #include "mux.h" @@ -35,6 +35,13 @@ */ #define DM644X_REF_FREQ 27000000 +#define DM644X_EMAC_BASE 0x01c80000 +#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000) +#define DM644X_EMAC_CNTRL_OFFSET 0x0000 +#define DM644X_EMAC_CNTRL_MOD_OFFSET 0x1000 +#define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000 +#define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000 + static struct pll_data pll1_data = { .num = 1, .phys_base = DAVINCI_PLL1_BASE, @@ -587,13 +594,15 @@ static struct platform_device dm644x_asp_device = { .resource = dm644x_asp_resources, }; +#define DM644X_VPSS_BASE 0x01c73400 + static struct resource dm644x_vpss_resources[] = { { /* VPSS Base address */ .name = "vpss", - .start = 0x01c73400, - .end = 0x01c73400 + 0xff, - .flags = IORESOURCE_MEM, + .start = DM644X_VPSS_BASE, + .end = DM644X_VPSS_BASE + 0xff, + .flags = IORESOURCE_MEM, }, }; @@ -605,7 +614,7 @@ static struct platform_device dm644x_vpss_device = { .resource = dm644x_vpss_resources, }; -static struct resource vpfe_resources[] = { +static struct resource dm644x_vpfe_resources[] = { { .start = IRQ_VDINT0, .end = IRQ_VDINT0, @@ -618,7 +627,7 @@ static struct resource vpfe_resources[] = { }, }; -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); +static u64 dm644x_video_dma_mask = DMA_BIT_MASK(32); static struct resource dm644x_ccdc_resource[] = { /* CCDC Base address */ { @@ -634,27 +643,149 @@ static struct platform_device dm644x_ccdc_dev = { .num_resources = ARRAY_SIZE(dm644x_ccdc_resource), .resource = dm644x_ccdc_resource, .dev = { - .dma_mask = &vpfe_capture_dma_mask, + .dma_mask = &dm644x_video_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), }, }; -static struct platform_device vpfe_capture_dev = { +static struct platform_device dm644x_vpfe_dev = { .name = CAPTURE_DRV_NAME, .id = -1, - .num_resources = ARRAY_SIZE(vpfe_resources), - .resource = vpfe_resources, + .num_resources = ARRAY_SIZE(dm644x_vpfe_resources), + .resource = dm644x_vpfe_resources, .dev = { - .dma_mask = &vpfe_capture_dma_mask, + .dma_mask = &dm644x_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +#define DM644X_OSD_BASE 0x01c72600 + +static struct resource dm644x_osd_resources[] = { + { + .start = DM644X_OSD_BASE, + .end = DM644X_OSD_BASE + 0x1ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct osd_platform_data dm644x_osd_data = { + .vpbe_type = VPBE_VERSION_1, +}; + +static struct platform_device dm644x_osd_dev = { + .name = VPBE_OSD_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm644x_osd_resources), + .resource = dm644x_osd_resources, + .dev = { + .dma_mask = &dm644x_video_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dm644x_osd_data, }, }; -void dm644x_set_vpfe_config(struct vpfe_config *cfg) +#define DM644X_VENC_BASE 0x01c72400 + +static struct resource dm644x_venc_resources[] = { + { + .start = DM644X_VENC_BASE, + .end = DM644X_VENC_BASE + 0x17f, + .flags = IORESOURCE_MEM, + }, +}; + +#define DM644X_VPSS_MUXSEL_PLL2_MODE BIT(0) +#define DM644X_VPSS_MUXSEL_VPBECLK_MODE BIT(1) +#define DM644X_VPSS_VENCLKEN BIT(3) +#define DM644X_VPSS_DACCLKEN BIT(4) + +static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, + unsigned int mode) { - vpfe_capture_dev.dev.platform_data = cfg; + int ret = 0; + u32 v = DM644X_VPSS_VENCLKEN; + + switch (type) { + case VPBE_ENC_STD: + v |= DM644X_VPSS_DACCLKEN; + writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); + break; + case VPBE_ENC_DV_PRESET: + switch (mode) { + case V4L2_DV_480P59_94: + case V4L2_DV_576P50: + v |= DM644X_VPSS_MUXSEL_PLL2_MODE | + DM644X_VPSS_DACCLKEN; + writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); + break; + case V4L2_DV_720P60: + case V4L2_DV_1080I60: + case V4L2_DV_1080P30: + /* + * For HD, use external clock source since + * HD requires higher clock rate + */ + v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE; + writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); + break; + default: + ret = -EINVAL; + break; + } + break; + default: + ret = -EINVAL; + } + + return ret; } +static struct resource dm644x_v4l2_disp_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_vpbe_display = { + .name = "vpbe-v4l2", + .id = -1, + .num_resources = ARRAY_SIZE(dm644x_v4l2_disp_resources), + .resource = dm644x_v4l2_disp_resources, + .dev = { + .dma_mask = &dm644x_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct venc_platform_data dm644x_venc_pdata = { + .venc_type = VPBE_VERSION_1, + .setup_clock = dm644x_venc_setup_clock, +}; + +static struct platform_device dm644x_venc_dev = { + .name = VPBE_VENC_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm644x_venc_resources), + .resource = dm644x_venc_resources, + .dev = { + .dma_mask = &dm644x_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dm644x_venc_pdata, + }, +}; + +static struct platform_device dm644x_vpbe_dev = { + .name = "vpbe_controller", + .id = -1, + .dev = { + .dma_mask = &dm644x_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + /*----------------------------------------------------------------------*/ static struct map_desc dm644x_io_desc[] = { @@ -779,6 +910,35 @@ void __init dm644x_init_asp(struct snd_platform_data *pdata) void __init dm644x_init(void) { davinci_common_init(&davinci_soc_info_dm644x); + davinci_map_sysmod(); +} + +int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, + struct vpbe_config *vpbe_cfg) +{ + if (vpfe_cfg || vpbe_cfg) + platform_device_register(&dm644x_vpss_device); + + if (vpfe_cfg) { + dm644x_vpfe_dev.dev.platform_data = vpfe_cfg; + platform_device_register(&dm644x_ccdc_dev); + platform_device_register(&dm644x_vpfe_dev); + /* Add ccdc clock aliases */ + clk_add_alias("master", dm644x_ccdc_dev.name, + "vpss_master", NULL); + clk_add_alias("slave", dm644x_ccdc_dev.name, + "vpss_slave", NULL); + } + + if (vpbe_cfg) { + dm644x_vpbe_dev.dev.platform_data = vpbe_cfg; + platform_device_register(&dm644x_osd_dev); + platform_device_register(&dm644x_venc_dev); + platform_device_register(&dm644x_vpbe_dev); + platform_device_register(&dm644x_vpbe_display); + } + + return 0; } static int __init dm644x_init_devices(void) @@ -786,9 +946,6 @@ static int __init dm644x_init_devices(void) if (!cpu_is_davinci_dm644x()) return 0; - /* Add ccdc clock aliases */ - clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL); - clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL); platform_device_register(&dm644x_edma_device); platform_device_register(&dm644x_mdio_device); @@ -796,10 +953,6 @@ static int __init dm644x_init_devices(void) clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev), NULL, &dm644x_emac_device.dev); - platform_device_register(&dm644x_vpss_device); - platform_device_register(&dm644x_ccdc_dev); - platform_device_register(&vpfe_capture_dev); - return 0; } postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 00f774394b16..9eb87c1d1edd 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -16,7 +16,6 @@ #include <asm/mach/map.h> -#include <mach/dm646x.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/irqs.h> @@ -28,12 +27,11 @@ #include <mach/asp.h> #include <mach/gpio-davinci.h> +#include "davinci.h" #include "clock.h" #include "mux.h" #define DAVINCI_VPIF_BASE (0x01C12000) -#define VDD3P3V_PWDN_OFFSET (0x48) -#define VSCLKDIS_OFFSET (0x6C) #define VDD3P3V_VID_MASK (BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\ BIT_MASK(0)) @@ -46,6 +44,13 @@ #define DM646X_REF_FREQ 27000000 #define DM646X_AUX_FREQ 24000000 +#define DM646X_EMAC_BASE 0x01c80000 +#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000) +#define DM646X_EMAC_CNTRL_OFFSET 0x0000 +#define DM646X_EMAC_CNTRL_MOD_OFFSET 0x1000 +#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000 +#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000 + static struct pll_data pll1_data = { .num = 1, .phys_base = DAVINCI_PLL1_BASE, @@ -873,15 +878,14 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config, struct vpif_capture_config *capture_config) { unsigned int value; - void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); - value = __raw_readl(base + VSCLKDIS_OFFSET); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); value &= ~VSCLKDIS_MASK; - __raw_writel(value, base + VSCLKDIS_OFFSET); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - value = __raw_readl(base + VDD3P3V_PWDN_OFFSET); + value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); value &= ~VDD3P3V_VID_MASK; - __raw_writel(value, base + VDD3P3V_PWDN_OFFSET); + __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); davinci_cfg_reg(DM646X_STSOMUX_DISABLE); davinci_cfg_reg(DM646X_STSIMUX_DISABLE); @@ -905,6 +909,7 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv) void __init dm646x_init(void) { davinci_common_init(&davinci_soc_info_dm646x); + davinci_map_sysmod(); } static int __init dm646x_init_devices(void) diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index da90103a313d..fd33919c95d4 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -1508,12 +1508,8 @@ static int __init edma_probe(struct platform_device *pdev) goto fail; } - /* Everything lives on transfer controller 1 until otherwise - * specified. This way, long transfers on the low priority queue - * started by the codec engine will not cause audio defects. - */ for (i = 0; i < edma_cc[j]->num_channels; i++) - map_dmach_queue(j, i, EVENTQ_1); + map_dmach_queue(j, i, info[j]->default_queue); queue_tc_mapping = info[j]->queue_tc_mapping; queue_priority_mapping = info[j]->queue_priority_mapping; diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h deleted file mode 100644 index 36dff4a0ce3f..000000000000 --- a/arch/arm/mach-davinci/include/mach/dm355.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Chip specific defines for DM355 SoC - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DM355_H -#define __ASM_ARCH_DM355_H - -#include <mach/hardware.h> -#include <mach/asp.h> -#include <media/davinci/vpfe_capture.h> - -#define DM355_ASYNC_EMIF_CONTROL_BASE 0x01E10000 -#define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 - -#define ASP1_TX_EVT_EN 1 -#define ASP1_RX_EVT_EN 2 - -struct spi_board_info; - -void __init dm355_init(void); -void dm355_init_spi0(unsigned chipselect_mask, - struct spi_board_info *info, unsigned len); -void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); -void dm355_set_vpfe_config(struct vpfe_config *cfg); - -#endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h index 2563bf4e93a1..b9bf3d6a4423 100644 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ b/arch/arm/mach-davinci/include/mach/dm365.h @@ -1,52 +1 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_DM365_H -#define __ASM_ARCH_DM665_H - -#include <linux/platform_device.h> -#include <linux/davinci_emac.h> -#include <mach/hardware.h> -#include <mach/asp.h> -#include <mach/keyscan.h> -#include <media/davinci/vpfe_capture.h> - -#define DM365_EMAC_BASE (0x01D07000) -#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) -#define DM365_EMAC_CNTRL_OFFSET (0x0000) -#define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000) -#define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000) -#define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) - -/* Base of key scan register bank */ -#define DM365_KEYSCAN_BASE (0x01C69400) - -#define DM365_RTC_BASE (0x01C69000) - -#define DAVINCI_DM365_VC_BASE (0x01D0C000) -#define DAVINCI_DMA_VC_TX 2 -#define DAVINCI_DMA_VC_RX 3 - -#define DM365_ASYNC_EMIF_CONTROL_BASE 0x01D10000 -#define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 - -void __init dm365_init(void); -void __init dm365_init_asp(struct snd_platform_data *pdata); -void __init dm365_init_vc(struct snd_platform_data *pdata); -void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); -void __init dm365_init_rtc(void); -void dm365_init_spi0(unsigned chipselect_mask, - struct spi_board_info *info, unsigned len); - -void dm365_set_vpfe_config(struct vpfe_config *cfg); -#endif /* __ASM_ARCH_DM365_H */ +/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h deleted file mode 100644 index 5a1b26d4e68b..000000000000 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file contains the processor specific definitions - * of the TI DM644x. - * - * Copyright (C) 2008 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __ASM_ARCH_DM644X_H -#define __ASM_ARCH_DM644X_H - -#include <linux/davinci_emac.h> -#include <mach/hardware.h> -#include <mach/asp.h> -#include <media/davinci/vpfe_capture.h> - -#define DM644X_EMAC_BASE (0x01C80000) -#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000) -#define DM644X_EMAC_CNTRL_OFFSET (0x0000) -#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) -#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) - -#define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01E00000 -#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 -#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 -#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 - -void __init dm644x_init(void); -void __init dm644x_init_asp(struct snd_platform_data *pdata); -void dm644x_set_vpfe_config(struct vpfe_config *cfg); - -#endif /* __ASM_ARCH_DM644X_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index a8ee6c9f0bb0..b9bf3d6a4423 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -1,41 +1 @@ -/* - * Chip specific defines for DM646x SoC - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DM646X_H -#define __ASM_ARCH_DM646X_H - -#include <mach/hardware.h> -#include <mach/asp.h> -#include <linux/i2c.h> -#include <linux/videodev2.h> -#include <linux/davinci_emac.h> -#include <media/davinci/vpif_types.h> - -#define DM646X_EMAC_BASE (0x01C80000) -#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000) -#define DM646X_EMAC_CNTRL_OFFSET (0x0000) -#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) -#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) - -#define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000 -#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000 - -void __init dm646x_init(void); -void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); -void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); -int __init dm646x_init_edma(struct edma_rsv_info *rsv); - -void dm646x_video_init(void); - -void dm646x_setup_vpif(struct vpif_display_config *, - struct vpif_capture_config *); - -#endif /* __ASM_ARCH_DM646X_H */ +/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index 20c77f29bf0f..7e84c906ceff 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -250,6 +250,11 @@ struct edma_soc_info { unsigned n_slot; unsigned n_tc; unsigned n_cc; + /* + * Default queue is expected to be a low-priority queue. + * This way, long transfers on the default queue started + * by the codec engine will not cause audio defects. + */ enum dma_event_q default_queue; /* Resource reservation for other cores */ diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index e14c0dc0e12c..c1661d2feca9 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -11,17 +11,11 @@ #include <mach/io.h> #include <mach/irqs.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp ldr \base, =davinci_intc_base ldr \base, [\base] .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp #if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC) ldr \tmp, =davinci_intc_type diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index 414e0b93e741..0209b1fc22a1 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -19,8 +19,6 @@ * and the chip/board init code should then explicitly include * <chipname>.h */ -#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 - /* * I/O mapping */ diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h deleted file mode 100644 index fcb7a015aba5..000000000000 --- a/arch/arm/mach-davinci/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * DaVinci system defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/common.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S index e84c78c2a8b7..72d622baaad3 100644 --- a/arch/arm/mach-dove/include/mach/entry-macro.S +++ b/arch/arm/mach-dove/include/mach/entry-macro.S @@ -10,12 +10,6 @@ #include <mach/bridge-regs.h> - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_preamble, base, tmp ldr \base, =IRQ_VIRT_BASE .endm diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h deleted file mode 100644 index 3027954f6162..000000000000 --- a/arch/arm/mach-dove/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 52e96d397ba8..48a032005ea3 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -69,7 +69,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[0].flags = IORESOURCE_IO; if (request_resource(&ioport_resource, &pp->res[0])) panic("Request PCIe IO resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[0]); + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); /* * IORESOURCE_MEM @@ -88,7 +88,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[1].flags = IORESOURCE_MEM; if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe Memory resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[1]); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 294aad07f7a0..8c9f56a3e8ec 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -22,7 +22,7 @@ #include <asm/mach-types.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -30,10 +30,7 @@ #include <asm/mach/time.h> -#define IRQ_MASK 0xfe000000 /* read */ -#define IRQ_MSET 0xfe000000 /* write */ -#define IRQ_STAT 0xff000000 /* read */ -#define IRQ_MCLR 0xff000000 /* write */ +#include "core.h" static void ebsa110_mask_irq(struct irq_data *d) { @@ -79,22 +76,22 @@ static struct map_desc ebsa110_io_desc[] __initdata = { { /* IRQ_STAT/IRQ_MCLR */ .virtual = IRQ_STAT, .pfn = __phys_to_pfn(TRICK4_PHYS), - .length = PGDIR_SIZE, + .length = TRICK4_SIZE, .type = MT_DEVICE }, { /* IRQ_MASK/IRQ_MSET */ .virtual = IRQ_MASK, .pfn = __phys_to_pfn(TRICK3_PHYS), - .length = PGDIR_SIZE, + .length = TRICK3_SIZE, .type = MT_DEVICE }, { /* SOFT_BASE */ .virtual = SOFT_BASE, .pfn = __phys_to_pfn(TRICK1_PHYS), - .length = PGDIR_SIZE, + .length = TRICK1_SIZE, .type = MT_DEVICE }, { /* PIT_BASE */ .virtual = PIT_BASE, .pfn = __phys_to_pfn(TRICK0_PHYS), - .length = PGDIR_SIZE, + .length = TRICK0_SIZE, .type = MT_DEVICE }, @@ -271,8 +268,33 @@ static struct platform_device *ebsa110_devices[] = { &am79c961_device, }; +/* + * EBSA110 idling methodology: + * + * We can not execute the "wait for interrupt" instruction since that + * will stop our MCLK signal (which provides the clock for the glue + * logic, and therefore the timer interrupt). + * + * Instead, we spin, polling the IRQ_STAT register for the occurrence + * of any interrupt with core clock down to the memory clock. + */ +static void ebsa110_idle(void) +{ + const char *irq_stat = (char *)0xff000000; + + /* disable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); + + /* wait for an interrupt to occur */ + while (!*irq_stat); + + /* enable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); +} + static int __init ebsa110_init(void) { + arm_pm_idle = ebsa110_idle; return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); } diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h new file mode 100644 index 000000000000..c93c9e43012d --- /dev/null +++ b/arch/arm/mach-ebsa110/core.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 1996-2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains the core hardware definitions of the EBSA-110. + */ +#ifndef CORE_H +#define CORE_H + +/* Physical addresses/sizes */ +#define ISAMEM_PHYS 0xe0000000 +#define ISAMEM_SIZE 0x10000000 + +#define ISAIO_PHYS 0xf0000000 +#define ISAIO_SIZE PGDIR_SIZE + +#define TRICK0_PHYS 0xf2000000 +#define TRICK0_SIZE PGDIR_SIZE +#define TRICK1_PHYS 0xf2400000 +#define TRICK1_SIZE PGDIR_SIZE +#define TRICK2_PHYS 0xf2800000 +#define TRICK3_PHYS 0xf2c00000 +#define TRICK3_SIZE PGDIR_SIZE +#define TRICK4_PHYS 0xf3000000 +#define TRICK4_SIZE PGDIR_SIZE +#define TRICK5_PHYS 0xf3400000 +#define TRICK6_PHYS 0xf3800000 +#define TRICK7_PHYS 0xf3c00000 + +/* Virtual addresses */ +#define PIT_BASE 0xfc000000 /* trick 0 */ +#define SOFT_BASE 0xfd000000 /* trick 1 */ +#define IRQ_MASK 0xfe000000 /* trick 3 - read */ +#define IRQ_MSET 0xfe000000 /* trick 3 - write */ +#define IRQ_STAT 0xff000000 /* trick 4 - read */ +#define IRQ_MCLR 0xff000000 /* trick 4 - write */ + +#endif diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S index cc3e5992f6b3..14b110de78a9 100644 --- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S +++ b/arch/arm/mach-ebsa110/include/mach/entry-macro.S @@ -12,16 +12,10 @@ #define IRQ_STAT 0xff000000 /* read */ - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp mov \base, #IRQ_STAT .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, stat, base, tmp ldrb \stat, [\base] @ get interrupts mov \irqnr, #0 diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h index 4b2fb7743909..f4e5407bd004 100644 --- a/arch/arm/mach-ebsa110/include/mach/hardware.h +++ b/arch/arm/mach-ebsa110/include/mach/hardware.h @@ -12,48 +12,9 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -/* - * The EBSA110 has a weird "ISA IO" region: - * - * Region 0 (addr = 0xf0000000 + io << 2) - * -------------------------------------------------------- - * Physical region IO region - * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 - * f0000e60 - f0000e64 398 - 399 - * f0000de0 - f0000dfc 378 - 37f lp0 - * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 - * - * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) - * -------------------------------------------------------- - * Physical region IO region - * f00014f1 a79 pnp write data - * f00007c0 - f00007c1 3e0 - 3e1 pcmcia - * f00004f1 279 pnp address - * f0000440 - f000046c 220 - 236 eth0 - * f0000405 203 pnp read data - */ - -#define ISAMEM_PHYS 0xe0000000 -#define ISAMEM_SIZE 0x10000000 - -#define ISAIO_PHYS 0xf0000000 -#define ISAIO_SIZE PGDIR_SIZE - -#define TRICK0_PHYS 0xf2000000 -#define TRICK1_PHYS 0xf2400000 -#define TRICK2_PHYS 0xf2800000 -#define TRICK3_PHYS 0xf2c00000 -#define TRICK4_PHYS 0xf3000000 -#define TRICK5_PHYS 0xf3400000 -#define TRICK6_PHYS 0xf3800000 -#define TRICK7_PHYS 0xf3c00000 - #define ISAMEM_BASE 0xe0000000 #define ISAIO_BASE 0xf0000000 -#define PIT_BASE 0xfc000000 -#define SOFT_BASE 0xfd000000 - /* * RAM definitions */ diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h deleted file mode 100644 index 2e4af65edb6f..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/system.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static inline void arch_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - -#endif diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c index c52e3047a7eb..756cc377a73d 100644 --- a/arch/arm/mach-ebsa110/io.c +++ b/arch/arm/mach-ebsa110/io.c @@ -177,6 +177,26 @@ void writesl(void __iomem *addr, const void *data, int len) } EXPORT_SYMBOL(writesl); +/* + * The EBSA110 has a weird "ISA IO" region: + * + * Region 0 (addr = 0xf0000000 + io << 2) + * -------------------------------------------------------- + * Physical region IO region + * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 + * f0000e60 - f0000e64 398 - 399 + * f0000de0 - f0000dfc 378 - 37f lp0 + * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 + * + * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) + * -------------------------------------------------------- + * Physical region IO region + * f00014f1 a79 pnp write data + * f00007c0 - f00007c1 3e0 - 3e1 pcmcia + * f00004f1 279 pnp address + * f0000440 - f000046c 220 - 236 eth0 + * f0000405 203 pnp read data + */ #define SUPERIO_PORT(p) \ (((p) >> 3) == (0x3f8 >> 3) || \ ((p) >> 3) == (0x2f8 >> 3) || \ diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c index 6a6ea57c2a4e..99e14e362500 100644 --- a/arch/arm/mach-ebsa110/leds.c +++ b/arch/arm/mach-ebsa110/leds.c @@ -17,9 +17,10 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> +#include "core.h" + static spinlock_t leds_lock; static void ebsa110_leds_event(led_event_t ledevt) diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 574209d9e246..0dc51f9462de 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -8,6 +8,9 @@ obj- := obj-$(CONFIG_EP93XX_DMA) += dma.o +obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o +AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 + obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 681e939407d4..2d45947a3034 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -20,6 +20,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" static struct ep93xx_eth_data __initdata adssphere_eth_data = { .phy_id = 1, diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index ca4de7105097..c95dbce2468e 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -25,6 +25,7 @@ #include <asm/div64.h> +#include "soc.h" struct clk { struct clk *parent; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 24203f9a6796..8d2589588713 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -46,6 +46,7 @@ #include <asm/hardware/vic.h> +#include "soc.h" /************************************************************************* * Static I/O mappings that are needed for all EP93xx platforms @@ -204,7 +205,6 @@ void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) spin_unlock_irqrestore(&syscon_swlock, flags); } -EXPORT_SYMBOL(ep93xx_syscon_swlocked_write); void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) { @@ -221,7 +221,6 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) spin_unlock_irqrestore(&syscon_swlock, flags); } -EXPORT_SYMBOL(ep93xx_devcfg_set_clear); /** * ep93xx_chip_revision() - returns the EP93xx chip revision @@ -279,48 +278,14 @@ static struct amba_pl010_data ep93xx_uart_data = { .set_mctrl = ep93xx_uart_set_mctrl, }; -static struct amba_device uart1_device = { - .dev = { - .init_name = "apb:uart1", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART1_PHYS_BASE, - .end = EP93XX_UART1_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART1, NO_IRQ }, - .periphid = 0x00041010, -}; - -static struct amba_device uart2_device = { - .dev = { - .init_name = "apb:uart2", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART2_PHYS_BASE, - .end = EP93XX_UART2_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART2, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, + { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); -static struct amba_device uart3_device = { - .dev = { - .init_name = "apb:uart3", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART3_PHYS_BASE, - .end = EP93XX_UART3_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART3, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, + { IRQ_EP93XX_UART2 }, &ep93xx_uart_data); +static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, + { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); static struct resource ep93xx_rtc_resource[] = { { @@ -682,9 +647,19 @@ static struct platform_device ep93xx_fb_device = { .resource = ep93xx_fb_resource, }; +/* The backlight use a single register in the framebuffer's register space */ +#define EP93XX_RASTER_REG_BRIGHTNESS 0x20 + +static struct resource ep93xx_bl_resources[] = { + DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE + + EP93XX_RASTER_REG_BRIGHTNESS, 0x04), +}; + static struct platform_device ep93xx_bl_device = { .name = "ep93xx-bl", .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_bl_resources), + .resource = ep93xx_bl_resources, }; /** @@ -817,23 +792,12 @@ void __init ep93xx_register_i2s(void) #define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ EP93XX_SYSCON_I2SCLKDIV_SPOL) -int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) +int ep93xx_i2s_acquire(void) { unsigned val; - /* Sanity check */ - if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK) - return -EINVAL; - if (i2s_config & ~EP93XX_I2SCLKDIV_MASK) - return -EINVAL; - - /* Must have only one of I2SONSSP/I2SONAC97 set */ - if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) == - (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97)) - return -EINVAL; - - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); - ep93xx_devcfg_set_bits(i2s_pins); + ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97, + EP93XX_SYSCON_DEVCFG_I2S_MASK); /* * This is potentially racy with the clock api for i2s_mclk, sclk and @@ -843,7 +807,7 @@ int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) */ val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); val &= ~EP93XX_I2SCLKDIV_MASK; - val |= i2s_config; + val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL; ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); return 0; @@ -890,11 +854,32 @@ void __init ep93xx_register_ac97(void) platform_device_register(&ep93xx_pcm_device); } +/************************************************************************* + * EP93xx Watchdog + *************************************************************************/ +static struct resource ep93xx_wdt_resources[] = { + DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08), +}; + +static struct platform_device ep93xx_wdt_device = { + .name = "ep93xx-wdt", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_wdt_resources), + .resource = ep93xx_wdt_resources, +}; + void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); + /* Default all ports to GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK | + EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + /* Get the GPIO working early, other devices need it */ platform_device_register(&ep93xx_gpio_device); @@ -905,6 +890,7 @@ void __init ep93xx_init_devices(void) platform_device_register(&ep93xx_rtc_device); platform_device_register(&ep93xx_ohci_device); platform_device_register(&ep93xx_leds); + platform_device_register(&ep93xx_wdt_device); } void ep93xx_restart(char mode, const char *cmd) diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/mach-ep93xx/crunch-bits.S index 0ec9bb48fab9..0ec9bb48fab9 100644 --- a/arch/arm/kernel/crunch-bits.S +++ b/arch/arm/mach-ep93xx/crunch-bits.S diff --git a/arch/arm/kernel/crunch.c b/arch/arm/mach-ep93xx/crunch.c index 25ef223ba7f3..74753e2df603 100644 --- a/arch/arm/kernel/crunch.c +++ b/arch/arm/mach-ep93xx/crunch.c @@ -16,9 +16,11 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/io.h> -#include <mach/ep93xx-regs.h> + #include <asm/thread_notify.h> +#include "soc.h" + struct crunch_state *crunch_owner; void crunch_task_release(struct thread_info *thread) diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c index 5a2570881255..16976d7bdc8a 100644 --- a/arch/arm/mach-ep93xx/dma.c +++ b/arch/arm/mach-ep93xx/dma.c @@ -28,6 +28,8 @@ #include <mach/dma.h> #include <mach/hardware.h> +#include "soc.h" + #define DMA_CHANNEL(_name, _base, _irq) \ { .name = (_name), .base = (_base), .irq = (_irq) } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index d115653edca3..da9047d726f0 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -43,6 +43,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" static void __init edb93xx_register_flash(void) { diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index af46970dc58e..fcdffbe49dcc 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -20,6 +20,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" static struct ep93xx_eth_data __initdata gesbc9312_eth_data = { .phy_id = 1, diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S deleted file mode 100644 index 9be6edcf9045..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/entry-macro.S +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/entry-macro.S - * IRQ demultiplexing for EP93xx - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index c4a7b84ef06d..c64d74246602 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -6,40 +6,6 @@ #define __ASM_ARCH_EP93XX_REGS_H /* - * EP93xx Physical Memory Map: - * - * The ASDO pin is sampled at system reset to select a synchronous or - * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) - * the synchronous boot mode is selected. When ASDO is "0" (i.e - * pulled-down) the asynchronous boot mode is selected. - * - * In synchronous boot mode nSDCE3 is decoded starting at physical address - * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous - * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 - * decoded at 0xf0000000. - * - * There is known errata for the EP93xx dealing with External Memory - * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design - * Guidelines" for more information. This document can be found at: - * - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - -#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ -#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ -#define EP93XX_CS1_PHYS_BASE 0x10000000 -#define EP93XX_CS2_PHYS_BASE 0x20000000 -#define EP93XX_CS3_PHYS_BASE 0x30000000 -#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 -#define EP93XX_CS6_PHYS_BASE 0x60000000 -#define EP93XX_CS7_PHYS_BASE 0x70000000 -#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 -#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 -#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 -#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ -#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ - -/* * EP93xx linux memory map: * * virt phys size @@ -62,58 +28,7 @@ #define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x)) #define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) - -/* AHB peripherals */ -#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) - -#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) -#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) - -#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) -#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) - -#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) -#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) - -#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) - -#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) - -#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) - -#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) - -#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) - -#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) - -#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) - - -/* APB peripherals */ -#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) - -#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) -#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) - -#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) - -#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) -#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) -#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) -#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) - -#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) -#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) - -#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) -#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) - -#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) - +/* APB UARTs */ #define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000) #define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) @@ -123,108 +38,4 @@ #define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) #define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) -#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) -#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) - -#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) - -#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) -#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) - -#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) -#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) - -#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) -#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) -#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) -#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) -#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28) -#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27) -#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16) -#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) -#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) -#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) -#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) -#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) -#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) -#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) -#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) -#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) -#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) -#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) -#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) -#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) -#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24) -#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) -#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) -#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) -#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20) -#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) -#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18) -#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) -#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) -#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) -#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) -#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) -#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) -#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) -#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) -#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) -#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) -#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) -#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) -#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) -#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) -#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) -#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) -#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) -#define EP93XX_SYSCON_CLKDIV_ENABLE (1<<15) -#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) -#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) -#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 -#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) -#define EP93XX_SYSCON_I2SCLKDIV_SENA (1<<31) -#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) -#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) -#define EP93XX_I2SCLKDIV_SDIV (1 << 16) -#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) -#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) -#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) -#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) -#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) -#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31) -#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) -#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) -#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) -#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) -#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) -#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) -#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) -#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) -#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) -#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) -#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) -#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) -#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) -#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) -#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) - -#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) - - #endif diff --git a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h index 8aff2ea35877..6d7c571a519f 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h @@ -3,6 +3,16 @@ #ifndef __GPIO_EP93XX_H #define __GPIO_EP93XX_H +#include <mach/ep93xx-regs.h> + +#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) +#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) +#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) +#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) +#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) +#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) +#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) + /* GPIO port A. */ #define EP93XX_GPIO_LINE_A(x) ((x) + 0) #define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h index 4df842897eae..efcd47815a91 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/include/mach/hardware.h @@ -5,7 +5,6 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <mach/ep93xx-regs.h> #include <mach/platform.h> /* diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index d4c934931f9d..602bd87fd0ab 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -21,20 +21,6 @@ struct ep93xx_eth_data void ep93xx_map_io(void); void ep93xx_init_irq(void); -/* EP93xx System Controller software locked register write */ -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); - -static inline void ep93xx_devcfg_set_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(bits, 0x00); -} - -static inline void ep93xx_devcfg_clear_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(0x00, bits); -} - #define EP93XX_CHIP_REV_D0 3 #define EP93XX_CHIP_REV_D1 4 #define EP93XX_CHIP_REV_E0 5 @@ -59,7 +45,7 @@ void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); void ep93xx_keypad_release_gpio(struct platform_device *pdev); void ep93xx_register_i2s(void); -int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config); +int ep93xx_i2s_acquire(void); void ep93xx_i2s_release(void); void ep93xx_register_ac97(void); diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h deleted file mode 100644 index b5bec7cb9b52..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/system.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/system.h - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 7b98084f0c97..dc431c5f04ce 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -22,6 +22,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" /************************************************************************* * Micro9 NOR Flash diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index f4e553eca21c..f40c2987e545 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -29,6 +29,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" + static struct ep93xx_eth_data __initdata simone_eth_data = { .phy_id = 1, }; diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index fd846331ddff..0c00852ef160 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -35,6 +35,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" + #define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M) #define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */ diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h new file mode 100644 index 000000000000..979fba722926 --- /dev/null +++ b/arch/arm/mach-ep93xx/soc.h @@ -0,0 +1,213 @@ +/* + * arch/arm/mach-ep93xx/soc.h + * + * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com> + * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#ifndef _EP93XX_SOC_H +#define _EP93XX_SOC_H + +#include <mach/ep93xx-regs.h> + +/* + * EP93xx Physical Memory Map: + * + * The ASDO pin is sampled at system reset to select a synchronous or + * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) + * the synchronous boot mode is selected. When ASDO is "0" (i.e + * pulled-down) the asynchronous boot mode is selected. + * + * In synchronous boot mode nSDCE3 is decoded starting at physical address + * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous + * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 + * decoded at 0xf0000000. + * + * There is known errata for the EP93xx dealing with External Memory + * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design + * Guidelines" for more information. This document can be found at: + * + * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf + */ + +#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ +#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ +#define EP93XX_CS1_PHYS_BASE 0x10000000 +#define EP93XX_CS2_PHYS_BASE 0x20000000 +#define EP93XX_CS3_PHYS_BASE 0x30000000 +#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 +#define EP93XX_CS6_PHYS_BASE 0x60000000 +#define EP93XX_CS7_PHYS_BASE 0x70000000 +#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 +#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 +#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 +#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ +#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ + +/* AHB peripherals */ +#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) + +#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) +#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) + +#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) +#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) + +#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) +#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) + +#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) + +#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) + +#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) + +#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) + +#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) + +#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) + +#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) + +/* APB peripherals */ +#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) + +#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) +#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) + +#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) + +#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) +#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) + +#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) +#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) + +#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) + +#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) +#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) + +#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) +#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) + +#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) +#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) + +#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) +#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) + +#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000) +#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) + +/* System controller */ +#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) +#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) +#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) +#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) +#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) +#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) +#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16) +#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) +#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) +#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) +#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) +#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) +#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) +#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) +#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) +#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) +#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) +#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) +#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) +#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) +#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) +#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) +#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24) +#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) +#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) +#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) +#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20) +#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) +#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18) +#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) +#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) +#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) +#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) +#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) +#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) +#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) +#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) +#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) +#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) +#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) +#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) +#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) +#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) +#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) +#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) +#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) +#define EP93XX_SYSCON_CLKDIV_ENABLE (1<<15) +#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) +#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) +#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 +#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) +#define EP93XX_SYSCON_I2SCLKDIV_SENA (1<<31) +#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) +#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) +#define EP93XX_I2SCLKDIV_SDIV (1 << 16) +#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) +#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) +#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) +#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) +#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) +#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31) +#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) +#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) +#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) +#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) +#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) +#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) +#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) +#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) +#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) +#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) +#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) +#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) +#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) +#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) +#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) + +/* EP93xx System Controller software locked register write */ +void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); +void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); + +static inline void ep93xx_devcfg_set_bits(unsigned int bits) +{ + ep93xx_devcfg_set_clear(bits, 0x00); +} + +static inline void ep93xx_devcfg_clear_bits(unsigned int bits) +{ + ep93xx_devcfg_set_clear(0x00, bits); +} + +#endif /* _EP93XX_SOC_H */ diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 79f8ecf07a19..5ea790942e94 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -28,6 +28,7 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> +#include "soc.h" static struct map_desc ts72xx_io_desc[] __initdata = { { diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index d67d0b4feb6f..ba156eb225e8 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -39,6 +39,8 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> +#include "soc.h" + /************************************************************************* * Static I/O mappings for the FPGA *************************************************************************/ diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index dfad6538b273..0491ceef1cda 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -11,18 +11,19 @@ if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" -choice - prompt "EXYNOS System Type" - default ARCH_EXYNOS4 - config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" + default y select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help Samsung EXYNOS4 SoCs based systems -endchoice +config ARCH_EXYNOS5 + bool "SAMSUNG EXYNOS5" + select HAVE_SMP + help + Samsung EXYNOS5 (Cortex-A15) SoC based systems comment "EXYNOS SoCs" @@ -42,6 +43,7 @@ config SOC_EXYNOS4212 bool "SAMSUNG EXYNOS4212" default y depends on ARCH_EXYNOS4 + select SAMSUNG_DMADEV select S5P_PM if PM select S5P_SLEEP if PM help @@ -51,9 +53,17 @@ config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y depends on ARCH_EXYNOS4 + select SAMSUNG_DMADEV help Enable EXYNOS4412 SoC support +config SOC_EXYNOS5250 + bool "SAMSUNG EXYNOS5250" + default y + depends on ARCH_EXYNOS5 + help + Enable EXYNOS5250 SoC support + config EXYNOS4_MCT bool default y @@ -179,7 +189,9 @@ config MACH_SMDKV310 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI @@ -225,7 +237,9 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 @@ -262,11 +276,14 @@ config MACH_NURI select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S3C_DEV_I2C6 select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY @@ -276,6 +293,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_I2C6 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select S5P_SETUP_MIPIPHY @@ -296,7 +314,9 @@ config MACH_ORIGEN select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 select S5P_DEV_FIMD0 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI @@ -325,6 +345,7 @@ config MACH_SMDK4212 select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM + select EXYNOS4_DEV_DMA select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C7 @@ -343,7 +364,7 @@ config MACH_SMDK4412 Machine support for Samsung SMDK4412 endif -comment "Flattened Device Tree based board for Exynos4 based SoC" +comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" @@ -357,6 +378,15 @@ config MACH_EXYNOS4_DT Note: This is under development and not all peripherals can be supported with this machine file. +config MACH_EXYNOS5_DT + bool "SAMSUNG EXYNOS5 Machine using device tree" + select SOC_EXYNOS5250 + select USE_OF + select ARM_AMBA + help + Machine support for Samsung Exynos4 machine with device tree enabled. + Select this if a fdt blob is available for the EXYNOS4 SoC based board. + if ARCH_EXYNOS4 comment "Configuration for HSMMC 8-bit bus width" diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index d9191f9a7af8..8631840d1b5e 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -12,7 +12,9 @@ obj- := # Core -obj-$(CONFIG_ARCH_EXYNOS4) += common.o clock.o +obj-$(CONFIG_ARCH_EXYNOS) += common.o +obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o +obj-$(CONFIG_ARCH_EXYNOS5) += clock-exynos5.o obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o @@ -41,9 +43,11 @@ obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o +obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o # device support +obj-y += dev-uart.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o @@ -51,7 +55,7 @@ obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o -obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o +obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c new file mode 100644 index 000000000000..df54c2a92225 --- /dev/null +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -0,0 +1,1581 @@ +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/pm.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/sysmmu.h> + +#include "common.h" +#include "clock-exynos4.h" + +#ifdef CONFIG_PM_SLEEP +static struct sleep_save exynos4_clock_save[] = { + SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS), + SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS), + SAVE_ITEM(EXYNOS4_CLKSRC_TOP0), + SAVE_ITEM(EXYNOS4_CLKSRC_TOP1), + SAVE_ITEM(EXYNOS4_CLKSRC_CAM), + SAVE_ITEM(EXYNOS4_CLKSRC_TV), + SAVE_ITEM(EXYNOS4_CLKSRC_MFC), + SAVE_ITEM(EXYNOS4_CLKSRC_G3D), + SAVE_ITEM(EXYNOS4_CLKSRC_LCD0), + SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO), + SAVE_ITEM(EXYNOS4_CLKSRC_FSYS), + SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0), + SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1), + SAVE_ITEM(EXYNOS4_CLKDIV_CAM), + SAVE_ITEM(EXYNOS4_CLKDIV_TV), + SAVE_ITEM(EXYNOS4_CLKDIV_MFC), + SAVE_ITEM(EXYNOS4_CLKDIV_G3D), + SAVE_ITEM(EXYNOS4_CLKDIV_LCD0), + SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO), + SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0), + SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1), + SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2), + SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4), + SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5), + SAVE_ITEM(EXYNOS4_CLKDIV_TOP), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1), + SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO), + SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL), + SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK), + SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC), + SAVE_ITEM(EXYNOS4_CLKSRC_DMC), + SAVE_ITEM(EXYNOS4_CLKDIV_DMC0), + SAVE_ITEM(EXYNOS4_CLKDIV_DMC1), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC), + SAVE_ITEM(EXYNOS4_CLKSRC_CPU), + SAVE_ITEM(EXYNOS4_CLKDIV_CPU), + SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4), + SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU), + SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU), +}; +#endif + +static struct clk exynos4_clk_sclk_hdmi27m = { + .name = "sclk_hdmi27m", + .rate = 27000000, +}; + +static struct clk exynos4_clk_sclk_hdmiphy = { + .name = "sclk_hdmiphy", +}; + +static struct clk exynos4_clk_sclk_usbphy0 = { + .name = "sclk_usbphy0", + .rate = 27000000, +}; + +static struct clk exynos4_clk_sclk_usbphy1 = { + .name = "sclk_usbphy1", +}; + +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + +static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable); +} + +static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable); +} + +static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable); +} + +int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable); +} + +static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable); +} + +static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable); +} + +static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable); +} + +static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable); +} + +static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable); +} + +static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable); +} + +static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable); +} + +static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable); +} + +int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable); +} + +int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable); +} + +static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable); +} + +static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable); +} + +static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); +} + +static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); +} + +/* Core list of CMU_CPU side */ + +static struct clksrc_clk exynos4_clk_mout_apll = { + .clk = { + .name = "mout_apll", + }, + .sources = &clk_src_apll, + .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_apll = { + .clk = { + .name = "sclk_apll", + .parent = &exynos4_clk_mout_apll.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_mout_epll = { + .clk = { + .name = "mout_epll", + }, + .sources = &clk_src_epll, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 }, +}; + +struct clksrc_clk exynos4_clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + }, + .sources = &clk_src_mpll, + + /* reg_src will be added in each SoCs' clock */ +}; + +static struct clk *exynos4_clkset_moutcore_list[] = { + [0] = &exynos4_clk_mout_apll.clk, + [1] = &exynos4_clk_mout_mpll.clk, +}; + +static struct clksrc_sources exynos4_clkset_moutcore = { + .sources = exynos4_clkset_moutcore_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_moutcore_list), +}; + +static struct clksrc_clk exynos4_clk_moutcore = { + .clk = { + .name = "moutcore", + }, + .sources = &exynos4_clkset_moutcore, + .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 }, +}; + +static struct clksrc_clk exynos4_clk_coreclk = { + .clk = { + .name = "core_clk", + .parent = &exynos4_clk_moutcore.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_armclk = { + .clk = { + .name = "armclk", + .parent = &exynos4_clk_coreclk.clk, + }, +}; + +static struct clksrc_clk exynos4_clk_aclk_corem0 = { + .clk = { + .name = "aclk_corem0", + .parent = &exynos4_clk_coreclk.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_cores = { + .clk = { + .name = "aclk_cores", + .parent = &exynos4_clk_coreclk.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_corem1 = { + .clk = { + .name = "aclk_corem1", + .parent = &exynos4_clk_coreclk.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_periphclk = { + .clk = { + .name = "periphclk", + .parent = &exynos4_clk_coreclk.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 }, +}; + +/* Core list of CMU_CORE side */ + +static struct clk *exynos4_clkset_corebus_list[] = { + [0] = &exynos4_clk_mout_mpll.clk, + [1] = &exynos4_clk_sclk_apll.clk, +}; + +struct clksrc_sources exynos4_clkset_mout_corebus = { + .sources = exynos4_clkset_corebus_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_corebus_list), +}; + +static struct clksrc_clk exynos4_clk_mout_corebus = { + .clk = { + .name = "mout_corebus", + }, + .sources = &exynos4_clkset_mout_corebus, + .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_dmc = { + .clk = { + .name = "sclk_dmc", + .parent = &exynos4_clk_mout_corebus.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_cored = { + .clk = { + .name = "aclk_cored", + .parent = &exynos4_clk_sclk_dmc.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_corep = { + .clk = { + .name = "aclk_corep", + .parent = &exynos4_clk_aclk_cored.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_acp = { + .clk = { + .name = "aclk_acp", + .parent = &exynos4_clk_mout_corebus.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_pclk_acp = { + .clk = { + .name = "pclk_acp", + .parent = &exynos4_clk_aclk_acp.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 }, +}; + +/* Core list of CMU_TOP side */ + +struct clk *exynos4_clkset_aclk_top_list[] = { + [0] = &exynos4_clk_mout_mpll.clk, + [1] = &exynos4_clk_sclk_apll.clk, +}; + +static struct clksrc_sources exynos4_clkset_aclk = { + .sources = exynos4_clkset_aclk_top_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_aclk_top_list), +}; + +static struct clksrc_clk exynos4_clk_aclk_200 = { + .clk = { + .name = "aclk_200", + }, + .sources = &exynos4_clkset_aclk, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_100 = { + .clk = { + .name = "aclk_100", + }, + .sources = &exynos4_clkset_aclk, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_aclk_160 = { + .clk = { + .name = "aclk_160", + }, + .sources = &exynos4_clkset_aclk, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 }, +}; + +struct clksrc_clk exynos4_clk_aclk_133 = { + .clk = { + .name = "aclk_133", + }, + .sources = &exynos4_clkset_aclk, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 }, +}; + +static struct clk *exynos4_clkset_vpllsrc_list[] = { + [0] = &clk_fin_vpll, + [1] = &exynos4_clk_sclk_hdmi27m, +}; + +static struct clksrc_sources exynos4_clkset_vpllsrc = { + .sources = exynos4_clkset_vpllsrc_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_vpllsrc_list), +}; + +static struct clksrc_clk exynos4_clk_vpllsrc = { + .clk = { + .name = "vpll_src", + .enable = exynos4_clksrc_mask_top_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_vpllsrc, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos4_clkset_sclk_vpll_list[] = { + [0] = &exynos4_clk_vpllsrc.clk, + [1] = &clk_fout_vpll, +}; + +static struct clksrc_sources exynos4_clkset_sclk_vpll = { + .sources = exynos4_clkset_sclk_vpll_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_vpll_list), +}; + +static struct clksrc_clk exynos4_clk_sclk_vpll = { + .clk = { + .name = "sclk_vpll", + }, + .sources = &exynos4_clkset_sclk_vpll, + .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 }, +}; + +static struct clk exynos4_init_clocks_off[] = { + { + .name = "timers", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1<<24), + }, { + .name = "csis", + .devname = "s5p-mipi-csis.0", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "csis", + .devname = "s5p-mipi-csis.1", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "jpeg", + .id = 0, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "fimc", + .devname = "exynos4-fimc.0", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "fimc", + .devname = "exynos4-fimc.1", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "fimc", + .devname = "exynos4-fimc.2", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "fimc", + .devname = "exynos4-fimc.3", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.0", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.2", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.3", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "dwmmc", + .parent = &exynos4_clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "dac", + .devname = "s5p-sdo", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "mixer", + .devname = "s5p-mixer", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "vp", + .devname = "s5p-mixer", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hdmi", + .devname = "exynos4-hdmi", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "hdmiphy", + .devname = "exynos4-hdmi", + .enable = exynos4_clk_hdmiphy_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "dacphy", + .devname = "s5p-sdo", + .enable = exynos4_clk_dac_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "adc", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "keypad", + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "rtc", + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "watchdog", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 14), + }, { + .name = "usbhost", + .enable = exynos4_clk_ip_fsys_ctrl , + .ctrlbit = (1 << 12), + }, { + .name = "otg", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "spi", + .devname = "s3c64xx-spi.0", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "spi", + .devname = "s3c64xx-spi.1", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .devname = "s3c64xx-spi.2", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "iis", + .devname = "samsung-i2s.0", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "iis", + .devname = "samsung-i2s.1", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "iis", + .devname = "samsung-i2s.2", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "ac97", + .devname = "samsung-ac97", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "fimg2d", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "mfc", + .devname = "s5p-mfc", + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.0", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.1", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.2", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.3", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.4", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.5", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.6", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.7", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "i2c", + .devname = "s3c2440-hdmiphy-i2c", + .parent = &exynos4_clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 14), + }, { + .name = "SYSMMU_MDMA", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "SYSMMU_FIMC0", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "SYSMMU_FIMC1", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "SYSMMU_FIMC2", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "SYSMMU_FIMC3", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "SYSMMU_JPEG", + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "SYSMMU_FIMD0", + .enable = exynos4_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_FIMD1", + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_PCIe", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "SYSMMU_G2D", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "SYSMMU_ROTATOR", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_TV", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_MFC_L", + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "SYSMMU_MFC_R", + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 2), + } +}; + +static struct clk exynos4_init_clocks_on[] = { + { + .name = "uart", + .devname = "s5pv210-uart.0", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "uart", + .devname = "s5pv210-uart.1", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .devname = "s5pv210-uart.2", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .devname = "s5pv210-uart.3", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .devname = "s5pv210-uart.4", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "uart", + .devname = "s5pv210-uart.5", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 5), + } +}; + +static struct clk exynos4_clk_pdma0 = { + .name = "dma", + .devname = "dma-pl330.0", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 0), +}; + +static struct clk exynos4_clk_pdma1 = { + .name = "dma", + .devname = "dma-pl330.1", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), +}; + +static struct clk exynos4_clk_mdma1 = { + .name = "dma", + .devname = "dma-pl330.2", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = ((1 << 8) | (1 << 5) | (1 << 2)), +}; + +static struct clk exynos4_clk_fimd0 = { + .name = "fimd", + .devname = "exynos4-fb.0", + .enable = exynos4_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 0), +}; + +struct clk *exynos4_clkset_group_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &clk_xusbxti, + [2] = &exynos4_clk_sclk_hdmi27m, + [3] = &exynos4_clk_sclk_usbphy0, + [4] = &exynos4_clk_sclk_usbphy1, + [5] = &exynos4_clk_sclk_hdmiphy, + [6] = &exynos4_clk_mout_mpll.clk, + [7] = &exynos4_clk_mout_epll.clk, + [8] = &exynos4_clk_sclk_vpll.clk, +}; + +struct clksrc_sources exynos4_clkset_group = { + .sources = exynos4_clkset_group_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_group_list), +}; + +static struct clk *exynos4_clkset_mout_g2d0_list[] = { + [0] = &exynos4_clk_mout_mpll.clk, + [1] = &exynos4_clk_sclk_apll.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_g2d0 = { + .sources = exynos4_clkset_mout_g2d0_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list), +}; + +static struct clksrc_clk exynos4_clk_mout_g2d0 = { + .clk = { + .name = "mout_g2d0", + }, + .sources = &exynos4_clkset_mout_g2d0, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos4_clkset_mout_g2d1_list[] = { + [0] = &exynos4_clk_mout_epll.clk, + [1] = &exynos4_clk_sclk_vpll.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_g2d1 = { + .sources = exynos4_clkset_mout_g2d1_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list), +}; + +static struct clksrc_clk exynos4_clk_mout_g2d1 = { + .clk = { + .name = "mout_g2d1", + }, + .sources = &exynos4_clkset_mout_g2d1, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 }, +}; + +static struct clk *exynos4_clkset_mout_g2d_list[] = { + [0] = &exynos4_clk_mout_g2d0.clk, + [1] = &exynos4_clk_mout_g2d1.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_g2d = { + .sources = exynos4_clkset_mout_g2d_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d_list), +}; + +static struct clk *exynos4_clkset_mout_mfc0_list[] = { + [0] = &exynos4_clk_mout_mpll.clk, + [1] = &exynos4_clk_sclk_apll.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_mfc0 = { + .sources = exynos4_clkset_mout_mfc0_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc0_list), +}; + +static struct clksrc_clk exynos4_clk_mout_mfc0 = { + .clk = { + .name = "mout_mfc0", + }, + .sources = &exynos4_clkset_mout_mfc0, + .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos4_clkset_mout_mfc1_list[] = { + [0] = &exynos4_clk_mout_epll.clk, + [1] = &exynos4_clk_sclk_vpll.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_mfc1 = { + .sources = exynos4_clkset_mout_mfc1_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc1_list), +}; + +static struct clksrc_clk exynos4_clk_mout_mfc1 = { + .clk = { + .name = "mout_mfc1", + }, + .sources = &exynos4_clkset_mout_mfc1, + .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 }, +}; + +static struct clk *exynos4_clkset_mout_mfc_list[] = { + [0] = &exynos4_clk_mout_mfc0.clk, + [1] = &exynos4_clk_mout_mfc1.clk, +}; + +static struct clksrc_sources exynos4_clkset_mout_mfc = { + .sources = exynos4_clkset_mout_mfc_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc_list), +}; + +static struct clk *exynos4_clkset_sclk_dac_list[] = { + [0] = &exynos4_clk_sclk_vpll.clk, + [1] = &exynos4_clk_sclk_hdmiphy, +}; + +static struct clksrc_sources exynos4_clkset_sclk_dac = { + .sources = exynos4_clkset_sclk_dac_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_dac_list), +}; + +static struct clksrc_clk exynos4_clk_sclk_dac = { + .clk = { + .name = "sclk_dac", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &exynos4_clkset_sclk_dac, + .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_pixel = { + .clk = { + .name = "sclk_pixel", + .parent = &exynos4_clk_sclk_vpll.clk, + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 }, +}; + +static struct clk *exynos4_clkset_sclk_hdmi_list[] = { + [0] = &exynos4_clk_sclk_pixel.clk, + [1] = &exynos4_clk_sclk_hdmiphy, +}; + +static struct clksrc_sources exynos4_clkset_sclk_hdmi = { + .sources = exynos4_clkset_sclk_hdmi_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list), +}; + +static struct clksrc_clk exynos4_clk_sclk_hdmi = { + .clk = { + .name = "sclk_hdmi", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_sclk_hdmi, + .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos4_clkset_sclk_mixer_list[] = { + [0] = &exynos4_clk_sclk_dac.clk, + [1] = &exynos4_clk_sclk_hdmi.clk, +}; + +static struct clksrc_sources exynos4_clkset_sclk_mixer = { + .sources = exynos4_clkset_sclk_mixer_list, + .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_mixer_list), +}; + +static struct clksrc_clk exynos4_clk_sclk_mixer = { + .clk = { + .name = "sclk_mixer", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &exynos4_clkset_sclk_mixer, + .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk *exynos4_sclk_tv[] = { + &exynos4_clk_sclk_dac, + &exynos4_clk_sclk_pixel, + &exynos4_clk_sclk_hdmi, + &exynos4_clk_sclk_mixer, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc0 = { + .clk = { + .name = "dout_mmc0", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc1 = { + .clk = { + .name = "dout_mmc1", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc2 = { + .clk = { + .name = "dout_mmc2", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc3 = { + .clk = { + .name = "dout_mmc3", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_dout_mmc4 = { + .clk = { + .name = "dout_mmc4", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clksrcs[] = { + { + .clk = { + .name = "sclk_pwm", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_csis", + .devname = "s5p-mipi-csis.0", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "sclk_csis", + .devname = "s5p-mipi-csis.1", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 28), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam0", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam1", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .devname = "exynos4-fimc.0", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .devname = "exynos4-fimc.1", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .devname = "exynos4-fimc.2", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .devname = "exynos4-fimc.3", + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .devname = "exynos4-fb.0", + .enable = exynos4_clksrc_mask_lcd0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimg2d", + }, + .sources = &exynos4_clkset_mout_g2d, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mfc", + .devname = "s5p-mfc", + }, + .sources = &exynos4_clkset_mout_mfc, + .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_dwmmc", + .parent = &exynos4_clk_dout_mmc4.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 }, + } +}; + +static struct clksrc_clk exynos4_clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.0", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.1", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.2", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.3", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .parent = &exynos4_clk_dout_mmc0.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 0), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .parent = &exynos4_clk_dout_mmc1.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 4), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .parent = &exynos4_clk_dout_mmc2.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 8), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_mmc3 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.3", + .parent = &exynos4_clk_dout_mmc3.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 12), + }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.0", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.1", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_sclk_spi2 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.2", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *exynos4_sysclks[] = { + &exynos4_clk_mout_apll, + &exynos4_clk_sclk_apll, + &exynos4_clk_mout_epll, + &exynos4_clk_mout_mpll, + &exynos4_clk_moutcore, + &exynos4_clk_coreclk, + &exynos4_clk_armclk, + &exynos4_clk_aclk_corem0, + &exynos4_clk_aclk_cores, + &exynos4_clk_aclk_corem1, + &exynos4_clk_periphclk, + &exynos4_clk_mout_corebus, + &exynos4_clk_sclk_dmc, + &exynos4_clk_aclk_cored, + &exynos4_clk_aclk_corep, + &exynos4_clk_aclk_acp, + &exynos4_clk_pclk_acp, + &exynos4_clk_vpllsrc, + &exynos4_clk_sclk_vpll, + &exynos4_clk_aclk_200, + &exynos4_clk_aclk_100, + &exynos4_clk_aclk_160, + &exynos4_clk_aclk_133, + &exynos4_clk_dout_mmc0, + &exynos4_clk_dout_mmc1, + &exynos4_clk_dout_mmc2, + &exynos4_clk_dout_mmc3, + &exynos4_clk_dout_mmc4, + &exynos4_clk_mout_mfc0, + &exynos4_clk_mout_mfc1, +}; + +static struct clk *exynos4_clk_cdev[] = { + &exynos4_clk_pdma0, + &exynos4_clk_pdma1, + &exynos4_clk_mdma1, + &exynos4_clk_fimd0, +}; + +static struct clksrc_clk *exynos4_clksrc_cdev[] = { + &exynos4_clk_sclk_uart0, + &exynos4_clk_sclk_uart1, + &exynos4_clk_sclk_uart2, + &exynos4_clk_sclk_uart3, + &exynos4_clk_sclk_mmc0, + &exynos4_clk_sclk_mmc1, + &exynos4_clk_sclk_mmc2, + &exynos4_clk_sclk_mmc3, + &exynos4_clk_sclk_spi0, + &exynos4_clk_sclk_spi1, + &exynos4_clk_sclk_spi2, + +}; + +static struct clk_lookup exynos4_clk_lookup[] = { + CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk), + CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk), + CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk), + CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), + CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), + CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), + CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), +}; + +static int xtal_rate; + +static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) +{ + if (soc_is_exynos4210()) + return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0), + pll_4508); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0)); + else + return 0; +} + +static struct clk_ops exynos4_fout_apll_ops = { + .get_rate = exynos4_fout_apll_get_rate, +}; + +static u32 exynos4_vpll_div[][8] = { + { 54000000, 3, 53, 3, 1024, 0, 17, 0 }, + { 108000000, 3, 53, 2, 1024, 0, 17, 0 }, +}; + +static unsigned long exynos4_vpll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int vpll_con0, vpll_con1 = 0; + unsigned int i; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0); + vpll_con0 &= ~(0x1 << 27 | \ + PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ + PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ + PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); + + vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1); + vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \ + PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \ + PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) { + if (exynos4_vpll_div[i][0] == rate) { + vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT; + vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT; + vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT; + vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT; + vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT; + vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT; + vpll_con0 |= exynos4_vpll_div[i][7] << 27; + break; + } + } + + if (i == ARRAY_SIZE(exynos4_vpll_div)) { + printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", + __func__); + return -EINVAL; + } + + __raw_writel(vpll_con0, EXYNOS4_VPLL_CON0); + __raw_writel(vpll_con1, EXYNOS4_VPLL_CON1); + + /* Wait for VPLL lock */ + while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT))) + continue; + + clk->rate = rate; + return 0; +} + +static struct clk_ops exynos4_vpll_ops = { + .get_rate = exynos4_vpll_get_rate, + .set_rate = exynos4_vpll_set_rate, +}; + +void __init_or_cpufreq exynos4_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long apll = 0; + unsigned long mpll = 0; + unsigned long epll = 0; + unsigned long vpll = 0; + unsigned long vpllsrc; + unsigned long xtal; + unsigned long armclk; + unsigned long sclk_dmc; + unsigned long aclk_200; + unsigned long aclk_100; + unsigned long aclk_160; + unsigned long aclk_133; + unsigned int ptr; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + + xtal_rate = xtal; + + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + if (soc_is_exynos4210()) { + apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0), + pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0), + pll_4508); + epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0), + __raw_readl(EXYNOS4_EPLL_CON1), pll_4600); + + vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk); + vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0), + __raw_readl(EXYNOS4_VPLL_CON1), pll_4650c); + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { + apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0)); + mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0)); + epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0), + __raw_readl(EXYNOS4_EPLL_CON1)); + + vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk); + vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0), + __raw_readl(EXYNOS4_VPLL_CON1)); + } else { + /* nothing */ + } + + clk_fout_apll.ops = &exynos4_fout_apll_ops; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_vpll.ops = &exynos4_vpll_ops; + clk_fout_vpll.rate = vpll; + + printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", + apll, mpll, epll, vpll); + + armclk = clk_get_rate(&exynos4_clk_armclk.clk); + sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk); + + aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk); + aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk); + aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk); + aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk); + + printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" + "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", + armclk, sclk_dmc, aclk_200, + aclk_100, aclk_160, aclk_133); + + clk_f.rate = armclk; + clk_h.rate = sclk_dmc; + clk_p.rate = aclk_100; + + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++) + s3c_set_clksrc(&exynos4_clksrcs[ptr], true); +} + +static struct clk *exynos4_clks[] __initdata = { + &exynos4_clk_sclk_hdmi27m, + &exynos4_clk_sclk_hdmiphy, + &exynos4_clk_sclk_usbphy0, + &exynos4_clk_sclk_usbphy1, +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4_clock_suspend(void) +{ + s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); + return 0; +} + +static void exynos4_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); +} + +#else +#define exynos4_clock_suspend NULL +#define exynos4_clock_resume NULL +#endif + +static struct syscore_ops exynos4_clock_syscore_ops = { + .suspend = exynos4_clock_suspend, + .resume = exynos4_clock_resume, +}; + +void __init exynos4_register_clocks(void) +{ + int ptr; + + s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++) + s3c_register_clksrc(exynos4_sysclks[ptr], 1); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++) + s3c_register_clksrc(exynos4_sclk_tv[ptr], 1); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++) + s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1); + + s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs)); + s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on)); + + s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++) + s3c_disable_clocks(exynos4_clk_cdev[ptr], 1); + + s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off)); + s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off)); + clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup)); + + register_syscore_ops(&exynos4_clock_syscore_ops); + s3c24xx_register_clock(&dummy_apb_pclk); + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h new file mode 100644 index 000000000000..cb71c29c14d1 --- /dev/null +++ b/arch/arm/mach-exynos/clock-exynos4.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clksrc_clk exynos4_clk_aclk_133; +extern struct clksrc_clk exynos4_clk_mout_mpll; + +extern struct clksrc_sources exynos4_clkset_mout_corebus; +extern struct clksrc_sources exynos4_clkset_group; + +extern struct clk *exynos4_clkset_aclk_top_list[]; +extern struct clk *exynos4_clkset_group_list[]; + +extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index 13312ccb2d93..3b131e4b6ef5 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -1,7 +1,5 @@ /* - * linux/arch/arm/mach-exynos4/clock-exynos4210.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * * EXYNOS4210 - Clock support @@ -28,20 +26,20 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/exynos4-clock.h> #include "common.h" +#include "clock-exynos4.h" #ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { - SAVE_ITEM(S5P_CLKSRC_IMAGE), - SAVE_ITEM(S5P_CLKSRC_LCD1), - SAVE_ITEM(S5P_CLKDIV_IMAGE), - SAVE_ITEM(S5P_CLKDIV_LCD1), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), - SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210), - SAVE_ITEM(S5P_CLKGATE_IP_LCD1), - SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), + SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE), + SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE), + SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1), + SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1), + SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1), + SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE), + SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1), + SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR), }; #endif @@ -51,7 +49,7 @@ static struct clksrc_clk *sysclks[] = { static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) { - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); + return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable); } static struct clksrc_clk clksrcs[] = { @@ -62,9 +60,9 @@ static struct clksrc_clk clksrcs[] = { .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 24), }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, + .sources = &exynos4_clkset_mout_corebus, + .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 }, }, { .clk = { .name = "sclk_fimd", @@ -72,9 +70,9 @@ static struct clksrc_clk clksrcs[] = { .enable = exynos4_clksrc_mask_lcd1_ctrl, .ctrlbit = (1 << 0), }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 }, }, }; @@ -82,13 +80,13 @@ static struct clk init_clocks_off[] = { { .name = "sataphy", .id = -1, - .parent = &clk_aclk_133.clk, + .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 3), }, { .name = "sata", .id = -1, - .parent = &clk_aclk_133.clk, + .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 10), }, { @@ -117,7 +115,7 @@ static void exynos4210_clock_resume(void) #define exynos4210_clock_resume NULL #endif -struct syscore_ops exynos4210_clock_syscore_ops = { +static struct syscore_ops exynos4210_clock_syscore_ops = { .suspend = exynos4210_clock_suspend, .resume = exynos4210_clock_resume, }; @@ -126,9 +124,9 @@ void __init exynos4210_register_clocks(void) { int ptr; - clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU; - clk_mout_mpll.reg_src.shift = 8; - clk_mout_mpll.reg_src.size = 1; + exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU; + exynos4_clk_mout_mpll.reg_src.shift = 8; + exynos4_clk_mout_mpll.reg_src.size = 1; for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 48af28566fa1..3ecc01e06f74 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -1,7 +1,5 @@ /* - * linux/arch/arm/mach-exynos4/clock-exynos4212.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * * EXYNOS4212 - Clock support @@ -28,22 +26,22 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/exynos4-clock.h> #include "common.h" +#include "clock-exynos4.h" #ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { - SAVE_ITEM(S5P_CLKSRC_IMAGE), - SAVE_ITEM(S5P_CLKDIV_IMAGE), - SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), - SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), + SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE), + SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE), + SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE), + SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR), }; #endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, - [1] = &clk_mout_mpll.clk, + [1] = &exynos4_clk_mout_mpll.clk, }; static struct clksrc_sources clk_src_mpll_user = { @@ -56,7 +54,7 @@ static struct clksrc_clk clk_mout_mpll_user = { .name = "mout_mpll_user", }, .sources = &clk_src_mpll_user, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 }, + .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 }, }; static struct clksrc_clk *sysclks[] = { @@ -89,7 +87,7 @@ static void exynos4212_clock_resume(void) #define exynos4212_clock_resume NULL #endif -struct syscore_ops exynos4212_clock_syscore_ops = { +static struct syscore_ops exynos4212_clock_syscore_ops = { .suspend = exynos4212_clock_suspend, .resume = exynos4212_clock_resume, }; @@ -99,15 +97,15 @@ void __init exynos4212_register_clocks(void) int ptr; /* usbphy1 is removed */ - clkset_group_list[4] = NULL; + exynos4_clkset_group_list[4] = NULL; /* mout_mpll_user is used */ - clkset_group_list[6] = &clk_mout_mpll_user.clk; - clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; + exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk; + exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; - clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC; - clk_mout_mpll.reg_src.shift = 12; - clk_mout_mpll.reg_src.size = 1; + exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC; + exynos4_clk_mout_mpll.reg_src.shift = 12; + exynos4_clk_mout_mpll.reg_src.size = 1; for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c new file mode 100644 index 000000000000..d013982d0f8e --- /dev/null +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -0,0 +1,1247 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Clock support for EXYNOS5 SoCs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/pm.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/sysmmu.h> + +#include "common.h" + +#ifdef CONFIG_PM_SLEEP +static struct sleep_save exynos5_clock_save[] = { + /* will be implemented */ +}; +#endif + +static struct clk exynos5_clk_sclk_dptxphy = { + .name = "sclk_dptx", +}; + +static struct clk exynos5_clk_sclk_hdmi24m = { + .name = "sclk_hdmi24m", + .rate = 24000000, +}; + +static struct clk exynos5_clk_sclk_hdmi27m = { + .name = "sclk_hdmi27m", + .rate = 27000000, +}; + +static struct clk exynos5_clk_sclk_hdmiphy = { + .name = "sclk_hdmiphy", +}; + +static struct clk exynos5_clk_sclk_usbphy = { + .name = "sclk_usbphy", + .rate = 48000000, +}; + +static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable); +} + +static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable); +} + +static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable); +} + +static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable); +} + +static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable); +} + +static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable); +} + +static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable); +} + +static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable); +} + +static int exynos5_clk_block_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable); +} + +static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable); +} + +static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable); +} + +static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable); +} + +static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable); +} + +static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable); +} + +/* Core list of CMU_CPU side */ + +static struct clksrc_clk exynos5_clk_mout_apll = { + .clk = { + .name = "mout_apll", + }, + .sources = &clk_src_apll, + .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_apll = { + .clk = { + .name = "sclk_apll", + .parent = &exynos5_clk_mout_apll.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_mout_bpll = { + .clk = { + .name = "mout_bpll", + }, + .sources = &clk_src_bpll, + .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos5_clk_src_bpll_user_list[] = { + [0] = &clk_fin_mpll, + [1] = &exynos5_clk_mout_bpll.clk, +}; + +static struct clksrc_sources exynos5_clk_src_bpll_user = { + .sources = exynos5_clk_src_bpll_user_list, + .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list), +}; + +static struct clksrc_clk exynos5_clk_mout_bpll_user = { + .clk = { + .name = "mout_bpll_user", + }, + .sources = &exynos5_clk_src_bpll_user, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_mout_cpll = { + .clk = { + .name = "mout_cpll", + }, + .sources = &clk_src_cpll, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_mout_epll = { + .clk = { + .name = "mout_epll", + }, + .sources = &clk_src_epll, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 }, +}; + +struct clksrc_clk exynos5_clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 }, +}; + +static struct clk *exynos_clkset_vpllsrc_list[] = { + [0] = &clk_fin_vpll, + [1] = &exynos5_clk_sclk_hdmi27m, +}; + +static struct clksrc_sources exynos5_clkset_vpllsrc = { + .sources = exynos_clkset_vpllsrc_list, + .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list), +}; + +static struct clksrc_clk exynos5_clk_vpllsrc = { + .clk = { + .name = "vpll_src", + .enable = exynos5_clksrc_mask_top_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos5_clkset_vpllsrc, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos5_clkset_sclk_vpll_list[] = { + [0] = &exynos5_clk_vpllsrc.clk, + [1] = &clk_fout_vpll, +}; + +static struct clksrc_sources exynos5_clkset_sclk_vpll = { + .sources = exynos5_clkset_sclk_vpll_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list), +}; + +static struct clksrc_clk exynos5_clk_sclk_vpll = { + .clk = { + .name = "sclk_vpll", + }, + .sources = &exynos5_clkset_sclk_vpll, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_pixel = { + .clk = { + .name = "sclk_pixel", + .parent = &exynos5_clk_sclk_vpll.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 }, +}; + +static struct clk *exynos5_clkset_sclk_hdmi_list[] = { + [0] = &exynos5_clk_sclk_pixel.clk, + [1] = &exynos5_clk_sclk_hdmiphy, +}; + +static struct clksrc_sources exynos5_clkset_sclk_hdmi = { + .sources = exynos5_clkset_sclk_hdmi_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list), +}; + +static struct clksrc_clk exynos5_clk_sclk_hdmi = { + .clk = { + .name = "sclk_hdmi", + .enable = exynos5_clksrc_mask_disp1_0_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &exynos5_clkset_sclk_hdmi, + .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 }, +}; + +static struct clksrc_clk *exynos5_sclk_tv[] = { + &exynos5_clk_sclk_pixel, + &exynos5_clk_sclk_hdmi, +}; + +static struct clk *exynos5_clk_src_mpll_user_list[] = { + [0] = &clk_fin_mpll, + [1] = &exynos5_clk_mout_mpll.clk, +}; + +static struct clksrc_sources exynos5_clk_src_mpll_user = { + .sources = exynos5_clk_src_mpll_user_list, + .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list), +}; + +static struct clksrc_clk exynos5_clk_mout_mpll_user = { + .clk = { + .name = "mout_mpll_user", + }, + .sources = &exynos5_clk_src_mpll_user, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 }, +}; + +static struct clk *exynos5_clkset_mout_cpu_list[] = { + [0] = &exynos5_clk_mout_apll.clk, + [1] = &exynos5_clk_mout_mpll.clk, +}; + +static struct clksrc_sources exynos5_clkset_mout_cpu = { + .sources = exynos5_clkset_mout_cpu_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list), +}; + +static struct clksrc_clk exynos5_clk_mout_cpu = { + .clk = { + .name = "mout_cpu", + }, + .sources = &exynos5_clkset_mout_cpu, + .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_dout_armclk = { + .clk = { + .name = "dout_armclk", + .parent = &exynos5_clk_mout_cpu.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_dout_arm2clk = { + .clk = { + .name = "dout_arm2clk", + .parent = &exynos5_clk_dout_armclk.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 }, +}; + +static struct clk exynos5_clk_armclk = { + .name = "armclk", + .parent = &exynos5_clk_dout_arm2clk.clk, +}; + +/* Core list of CMU_CDREX side */ + +static struct clk *exynos5_clkset_cdrex_list[] = { + [0] = &exynos5_clk_mout_mpll.clk, + [1] = &exynos5_clk_mout_bpll.clk, +}; + +static struct clksrc_sources exynos5_clkset_cdrex = { + .sources = exynos5_clkset_cdrex_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list), +}; + +static struct clksrc_clk exynos5_clk_cdrex = { + .clk = { + .name = "clk_cdrex", + }, + .sources = &exynos5_clkset_cdrex, + .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_acp = { + .clk = { + .name = "aclk_acp", + .parent = &exynos5_clk_mout_mpll.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_pclk_acp = { + .clk = { + .name = "pclk_acp", + .parent = &exynos5_clk_aclk_acp.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 }, +}; + +/* Core list of CMU_TOP side */ + +struct clk *exynos5_clkset_aclk_top_list[] = { + [0] = &exynos5_clk_mout_mpll_user.clk, + [1] = &exynos5_clk_mout_bpll_user.clk, +}; + +struct clksrc_sources exynos5_clkset_aclk = { + .sources = exynos5_clkset_aclk_top_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list), +}; + +static struct clksrc_clk exynos5_clk_aclk_400 = { + .clk = { + .name = "aclk_400", + }, + .sources = &exynos5_clkset_aclk, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, +}; + +struct clk *exynos5_clkset_aclk_333_166_list[] = { + [0] = &exynos5_clk_mout_cpll.clk, + [1] = &exynos5_clk_mout_mpll_user.clk, +}; + +struct clksrc_sources exynos5_clkset_aclk_333_166 = { + .sources = exynos5_clkset_aclk_333_166_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list), +}; + +static struct clksrc_clk exynos5_clk_aclk_333 = { + .clk = { + .name = "aclk_333", + }, + .sources = &exynos5_clkset_aclk_333_166, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_166 = { + .clk = { + .name = "aclk_166", + }, + .sources = &exynos5_clkset_aclk_333_166, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_266 = { + .clk = { + .name = "aclk_266", + .parent = &exynos5_clk_mout_mpll_user.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_200 = { + .clk = { + .name = "aclk_200", + }, + .sources = &exynos5_clkset_aclk, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_66_pre = { + .clk = { + .name = "aclk_66_pre", + .parent = &exynos5_clk_mout_mpll_user.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_66 = { + .clk = { + .name = "aclk_66", + .parent = &exynos5_clk_aclk_66_pre.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 }, +}; + +static struct clk exynos5_init_clocks_off[] = { + { + .name = "timers", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 24), + }, { + .name = "rtc", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peris_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.0", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.2", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 14), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.3", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "dwmci", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "sata", + .devname = "ahci", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "sata_phy", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 24), + }, { + .name = "sata_phy_i2c", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "mfc", + .devname = "s5p-mfc", + .enable = exynos5_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hdmi", + .devname = "exynos4-hdmi", + .enable = exynos5_clk_ip_disp1_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "mixer", + .devname = "s5p-mixer", + .enable = exynos5_clk_ip_disp1_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "jpeg", + .enable = exynos5_clk_ip_gen_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "dsim0", + .enable = exynos5_clk_ip_disp1_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "iis", + .devname = "samsung-i2s.1", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "iis", + .devname = "samsung-i2s.2", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "pcm", + .devname = "samsung-pcm.1", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "pcm", + .devname = "samsung-pcm.2", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 23), + }, { + .name = "spdif", + .devname = "samsung-spdif", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "ac97", + .devname = "samsung-ac97", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "usbhost", + .enable = exynos5_clk_ip_fsys_ctrl , + .ctrlbit = (1 << 18), + }, { + .name = "usbotg", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "gps", + .enable = exynos5_clk_ip_gps_ctrl, + .ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)), + }, { + .name = "nfcon", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "iop", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)), + }, { + .name = "core_iop", + .enable = exynos5_clk_ip_core_ctrl, + .ctrlbit = ((1 << 21) | (1 << 3)), + }, { + .name = "mcu_iop", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.0", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.1", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.2", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.3", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.4", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.5", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.6", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.7", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "i2c", + .devname = "s3c2440-hdmiphy-i2c", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 14), + } +}; + +static struct clk exynos5_init_clocks_on[] = { + { + .name = "uart", + .devname = "s5pv210-uart.0", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "uart", + .devname = "s5pv210-uart.1", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .devname = "s5pv210-uart.2", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .devname = "s5pv210-uart.3", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .devname = "s5pv210-uart.4", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "uart", + .devname = "s5pv210-uart.5", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 5), + } +}; + +static struct clk exynos5_clk_pdma0 = { + .name = "dma", + .devname = "dma-pl330.0", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), +}; + +static struct clk exynos5_clk_pdma1 = { + .name = "dma", + .devname = "dma-pl330.1", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), +}; + +static struct clk exynos5_clk_mdma1 = { + .name = "dma", + .devname = "dma-pl330.2", + .enable = exynos5_clk_ip_gen_ctrl, + .ctrlbit = (1 << 4), +}; + +struct clk *exynos5_clkset_group_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = NULL, + [2] = &exynos5_clk_sclk_hdmi24m, + [3] = &exynos5_clk_sclk_dptxphy, + [4] = &exynos5_clk_sclk_usbphy, + [5] = &exynos5_clk_sclk_hdmiphy, + [6] = &exynos5_clk_mout_mpll_user.clk, + [7] = &exynos5_clk_mout_epll.clk, + [8] = &exynos5_clk_sclk_vpll.clk, + [9] = &exynos5_clk_mout_cpll.clk, +}; + +struct clksrc_sources exynos5_clkset_group = { + .sources = exynos5_clkset_group_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list), +}; + +/* Possible clock sources for aclk_266_gscl_sub Mux */ +static struct clk *clk_src_gscl_266_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &exynos5_clk_aclk_266.clk, +}; + +static struct clksrc_sources clk_src_gscl_266 = { + .sources = clk_src_gscl_266_list, + .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list), +}; + +static struct clksrc_clk exynos5_clk_dout_mmc0 = { + .clk = { + .name = "dout_mmc0", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_dout_mmc1 = { + .clk = { + .name = "dout_mmc1", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_dout_mmc2 = { + .clk = { + .name = "dout_mmc2", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_dout_mmc3 = { + .clk = { + .name = "dout_mmc3", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_dout_mmc4 = { + .clk = { + .name = "dout_mmc4", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.0", + .enable = exynos5_clksrc_mask_peric0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.1", + .enable = exynos5_clksrc_mask_peric0_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.2", + .enable = exynos5_clksrc_mask_peric0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.3", + .enable = exynos5_clksrc_mask_peric0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .parent = &exynos5_clk_dout_mmc0.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 0), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .parent = &exynos5_clk_dout_mmc1.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 4), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .parent = &exynos5_clk_dout_mmc2.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 8), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_mmc3 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.3", + .parent = &exynos5_clk_dout_mmc3.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 12), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clksrcs[] = { + { + .clk = { + .name = "sclk_dwmci", + .parent = &exynos5_clk_dout_mmc4.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 }, + }, { + .clk = { + .name = "sclk_fimd", + .devname = "s3cfb.1", + .enable = exynos5_clksrc_mask_disp1_0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "aclk_266_gscl", + }, + .sources = &clk_src_gscl_266, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 }, + }, { + .clk = { + .name = "sclk_g3d", + .devname = "mali-t604.0", + .enable = exynos5_clk_block_ctrl, + .ctrlbit = (1 << 1), + }, + .sources = &exynos5_clkset_aclk, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, + }, { + .clk = { + .name = "sclk_gscl_wrap", + .devname = "s5p-mipi-csis.0", + .enable = exynos5_clksrc_mask_gscl_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "sclk_gscl_wrap", + .devname = "s5p-mipi-csis.1", + .enable = exynos5_clksrc_mask_gscl_ctrl, + .ctrlbit = (1 << 28), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam0", + .enable = exynos5_clksrc_mask_gscl_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam1", + .enable = exynos5_clksrc_mask_gscl_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_jpeg", + .parent = &exynos5_clk_mout_cpll.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *exynos5_sysclks[] = { + &exynos5_clk_mout_apll, + &exynos5_clk_sclk_apll, + &exynos5_clk_mout_bpll, + &exynos5_clk_mout_bpll_user, + &exynos5_clk_mout_cpll, + &exynos5_clk_mout_epll, + &exynos5_clk_mout_mpll, + &exynos5_clk_mout_mpll_user, + &exynos5_clk_vpllsrc, + &exynos5_clk_sclk_vpll, + &exynos5_clk_mout_cpu, + &exynos5_clk_dout_armclk, + &exynos5_clk_dout_arm2clk, + &exynos5_clk_cdrex, + &exynos5_clk_aclk_400, + &exynos5_clk_aclk_333, + &exynos5_clk_aclk_266, + &exynos5_clk_aclk_200, + &exynos5_clk_aclk_166, + &exynos5_clk_aclk_66_pre, + &exynos5_clk_aclk_66, + &exynos5_clk_dout_mmc0, + &exynos5_clk_dout_mmc1, + &exynos5_clk_dout_mmc2, + &exynos5_clk_dout_mmc3, + &exynos5_clk_dout_mmc4, + &exynos5_clk_aclk_acp, + &exynos5_clk_pclk_acp, +}; + +static struct clk *exynos5_clk_cdev[] = { + &exynos5_clk_pdma0, + &exynos5_clk_pdma1, + &exynos5_clk_mdma1, +}; + +static struct clksrc_clk *exynos5_clksrc_cdev[] = { + &exynos5_clk_sclk_uart0, + &exynos5_clk_sclk_uart1, + &exynos5_clk_sclk_uart2, + &exynos5_clk_sclk_uart3, + &exynos5_clk_sclk_mmc0, + &exynos5_clk_sclk_mmc1, + &exynos5_clk_sclk_mmc2, + &exynos5_clk_sclk_mmc3, +}; + +static struct clk_lookup exynos5_clk_lookup[] = { + CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk), + CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk), + CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk), + CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), + CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), + CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), +}; + +static unsigned long exynos5_epll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static struct clk *exynos5_clks[] __initdata = { + &exynos5_clk_sclk_hdmi27m, + &exynos5_clk_sclk_hdmiphy, + &clk_fout_bpll, + &clk_fout_cpll, + &exynos5_clk_armclk, +}; + +static u32 epll_div[][6] = { + { 192000000, 0, 48, 3, 1, 0 }, + { 180000000, 0, 45, 3, 1, 0 }, + { 73728000, 1, 73, 3, 3, 47710 }, + { 67737600, 1, 90, 4, 3, 20762 }, + { 49152000, 0, 49, 3, 3, 9961 }, + { 45158400, 0, 45, 3, 3, 10381 }, + { 180633600, 0, 45, 3, 1, 10381 }, +}; + +static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + unsigned int tmp; + unsigned int epll_rate; + unsigned int locktime; + unsigned int lockcnt; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + if (clk->parent) + epll_rate = clk_get_rate(clk->parent); + else + epll_rate = clk_ext_xtal_mux.rate; + + if (epll_rate != 24000000) { + pr_err("Invalid Clock : recommended clock is 24MHz.\n"); + return -EINVAL; + } + + epll_con = __raw_readl(EXYNOS5_EPLL_CON0); + epll_con &= ~(0x1 << 27 | \ + PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ + PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ + PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k = epll_div[i][5] << 0; + epll_con |= epll_div[i][1] << 27; + epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT; + epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT; + epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT; + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", + __func__); + return -EINVAL; + } + + epll_rate /= 1000000; + + /* 3000 max_cycls : specification data */ + locktime = 3000 / epll_rate * epll_div[i][3]; + lockcnt = locktime * 10000 / (10000 / epll_rate); + + __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK); + + __raw_writel(epll_con, EXYNOS5_EPLL_CON0); + __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1); + + do { + tmp = __raw_readl(EXYNOS5_EPLL_CON0); + } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT)); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops exynos5_epll_ops = { + .get_rate = exynos5_epll_get_rate, + .set_rate = exynos5_epll_set_rate, +}; + +static int xtal_rate; + +static unsigned long exynos5_fout_apll_get_rate(struct clk *clk) +{ + return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0)); +} + +static struct clk_ops exynos5_fout_apll_ops = { + .get_rate = exynos5_fout_apll_get_rate, +}; + +#ifdef CONFIG_PM +static int exynos5_clock_suspend(void) +{ + s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save)); + + return 0; +} + +static void exynos5_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save)); +} +#else +#define exynos5_clock_suspend NULL +#define exynos5_clock_resume NULL +#endif + +struct syscore_ops exynos5_clock_syscore_ops = { + .suspend = exynos5_clock_suspend, + .resume = exynos5_clock_resume, +}; + +void __init_or_cpufreq exynos5_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long apll; + unsigned long bpll; + unsigned long cpll; + unsigned long mpll; + unsigned long epll; + unsigned long vpll; + unsigned long vpllsrc; + unsigned long xtal; + unsigned long armclk; + unsigned long mout_cdrex; + unsigned long aclk_400; + unsigned long aclk_333; + unsigned long aclk_266; + unsigned long aclk_200; + unsigned long aclk_166; + unsigned long aclk_66; + unsigned int ptr; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + + xtal_rate = xtal; + + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0)); + bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0)); + cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0)); + mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0)); + epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0), + __raw_readl(EXYNOS5_EPLL_CON1)); + + vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk); + vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0), + __raw_readl(EXYNOS5_VPLL_CON1)); + + clk_fout_apll.ops = &exynos5_fout_apll_ops; + clk_fout_bpll.rate = bpll; + clk_fout_cpll.rate = cpll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_vpll.rate = vpll; + + printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n" + "M=%ld, E=%ld V=%ld", + apll, bpll, cpll, mpll, epll, vpll); + + armclk = clk_get_rate(&exynos5_clk_armclk); + mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk); + + aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk); + aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk); + aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk); + aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk); + aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk); + aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk); + + printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n" + "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n" + "ACLK166=%ld, ACLK66=%ld\n", + armclk, mout_cdrex, aclk_400, + aclk_333, aclk_266, aclk_200, + aclk_166, aclk_66); + + + clk_fout_epll.ops = &exynos5_epll_ops; + + if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll)) + printk(KERN_ERR "Unable to set parent %s of clock %s.\n", + clk_fout_epll.name, exynos5_clk_mout_epll.clk.name); + + clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000); + clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000); + + clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000); + clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++) + s3c_set_clksrc(&exynos5_clksrcs[ptr], true); +} + +void __init exynos5_register_clocks(void) +{ + int ptr; + + s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++) + s3c_register_clksrc(exynos5_sysclks[ptr], 1); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++) + s3c_register_clksrc(exynos5_sclk_tv[ptr], 1); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++) + s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1); + + s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs)); + s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on)); + + s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++) + s3c_disable_clocks(exynos5_clk_cdev[ptr], 1); + + s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off)); + s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off)); + clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup)); + + register_syscore_ops(&exynos5_clock_syscore_ops); + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c deleted file mode 100644 index 187287aa57ab..000000000000 --- a/arch/arm/mach-exynos/clock.c +++ /dev/null @@ -1,1564 +0,0 @@ -/* linux/arch/arm/mach-exynos4/clock.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> -#include <mach/sysmmu.h> -#include <mach/exynos4-clock.h> - -#include "common.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos4_clock_save[] = { - SAVE_ITEM(S5P_CLKDIV_LEFTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), - SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(S5P_CLKSRC_TOP0), - SAVE_ITEM(S5P_CLKSRC_TOP1), - SAVE_ITEM(S5P_CLKSRC_CAM), - SAVE_ITEM(S5P_CLKSRC_TV), - SAVE_ITEM(S5P_CLKSRC_MFC), - SAVE_ITEM(S5P_CLKSRC_G3D), - SAVE_ITEM(S5P_CLKSRC_LCD0), - SAVE_ITEM(S5P_CLKSRC_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_FSYS), - SAVE_ITEM(S5P_CLKSRC_PERIL0), - SAVE_ITEM(S5P_CLKSRC_PERIL1), - SAVE_ITEM(S5P_CLKDIV_CAM), - SAVE_ITEM(S5P_CLKDIV_TV), - SAVE_ITEM(S5P_CLKDIV_MFC), - SAVE_ITEM(S5P_CLKDIV_G3D), - SAVE_ITEM(S5P_CLKDIV_LCD0), - SAVE_ITEM(S5P_CLKDIV_MAUDIO), - SAVE_ITEM(S5P_CLKDIV_FSYS0), - SAVE_ITEM(S5P_CLKDIV_FSYS1), - SAVE_ITEM(S5P_CLKDIV_FSYS2), - SAVE_ITEM(S5P_CLKDIV_FSYS3), - SAVE_ITEM(S5P_CLKDIV_PERIL0), - SAVE_ITEM(S5P_CLKDIV_PERIL1), - SAVE_ITEM(S5P_CLKDIV_PERIL2), - SAVE_ITEM(S5P_CLKDIV_PERIL3), - SAVE_ITEM(S5P_CLKDIV_PERIL4), - SAVE_ITEM(S5P_CLKDIV_PERIL5), - SAVE_ITEM(S5P_CLKDIV_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_CAM), - SAVE_ITEM(S5P_CLKSRC_MASK_TV), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), - SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), - SAVE_ITEM(S5P_CLKDIV2_RATIO), - SAVE_ITEM(S5P_CLKGATE_SCLKCAM), - SAVE_ITEM(S5P_CLKGATE_IP_CAM), - SAVE_ITEM(S5P_CLKGATE_IP_TV), - SAVE_ITEM(S5P_CLKGATE_IP_MFC), - SAVE_ITEM(S5P_CLKGATE_IP_G3D), - SAVE_ITEM(S5P_CLKGATE_IP_LCD0), - SAVE_ITEM(S5P_CLKGATE_IP_FSYS), - SAVE_ITEM(S5P_CLKGATE_IP_GPS), - SAVE_ITEM(S5P_CLKGATE_IP_PERIL), - SAVE_ITEM(S5P_CLKGATE_BLOCK), - SAVE_ITEM(S5P_CLKSRC_MASK_DMC), - SAVE_ITEM(S5P_CLKSRC_DMC), - SAVE_ITEM(S5P_CLKDIV_DMC0), - SAVE_ITEM(S5P_CLKDIV_DMC1), - SAVE_ITEM(S5P_CLKGATE_IP_DMC), - SAVE_ITEM(S5P_CLKSRC_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), - SAVE_ITEM(S5P_CLKGATE_SCLKCPU), - SAVE_ITEM(S5P_CLKGATE_IP_CPU), -}; -#endif - -struct clk clk_sclk_hdmi27m = { - .name = "sclk_hdmi27m", - .rate = 27000000, -}; - -struct clk clk_sclk_hdmiphy = { - .name = "sclk_hdmiphy", -}; - -struct clk clk_sclk_usbphy0 = { - .name = "sclk_usbphy0", - .rate = 27000000, -}; - -struct clk clk_sclk_usbphy1 = { - .name = "sclk_usbphy1", -}; - -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - -static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); -} - -static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable); -} - -static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); -} - -int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); -} - -static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable); -} - -static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable); -} - -static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable); -} - -static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable); -} - -static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); -} - -static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_TV, clk, enable); -} - -static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable); -} - -static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); -} - -int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); -} - -int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); -} - -static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable); -} - -static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); -} - -static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); -} - -static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); -} - -/* Core list of CMU_CPU side */ - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, -}; - -struct clksrc_clk clk_sclk_apll = { - .clk = { - .name = "sclk_apll", - .parent = &clk_mout_apll.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, -}; - -struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, -}; - -struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .sources = &clk_src_mpll, - - /* reg_src will be added in each SoCs' clock */ -}; - -static struct clk *clkset_moutcore_list[] = { - [0] = &clk_mout_apll.clk, - [1] = &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_moutcore = { - .sources = clkset_moutcore_list, - .nr_sources = ARRAY_SIZE(clkset_moutcore_list), -}; - -static struct clksrc_clk clk_moutcore = { - .clk = { - .name = "moutcore", - }, - .sources = &clkset_moutcore, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk clk_coreclk = { - .clk = { - .name = "core_clk", - .parent = &clk_moutcore.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - .parent = &clk_coreclk.clk, - }, -}; - -static struct clksrc_clk clk_aclk_corem0 = { - .clk = { - .name = "aclk_corem0", - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_cores = { - .clk = { - .name = "aclk_cores", - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_corem1 = { - .clk = { - .name = "aclk_corem1", - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk clk_periphclk = { - .clk = { - .name = "periphclk", - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 }, -}; - -/* Core list of CMU_CORE side */ - -struct clk *clkset_corebus_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -struct clksrc_sources clkset_mout_corebus = { - .sources = clkset_corebus_list, - .nr_sources = ARRAY_SIZE(clkset_corebus_list), -}; - -static struct clksrc_clk clk_mout_corebus = { - .clk = { - .name = "mout_corebus", - }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_sclk_dmc = { - .clk = { - .name = "sclk_dmc", - .parent = &clk_mout_corebus.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_cored = { - .clk = { - .name = "aclk_cored", - .parent = &clk_sclk_dmc.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_corep = { - .clk = { - .name = "aclk_corep", - .parent = &clk_aclk_cored.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_acp = { - .clk = { - .name = "aclk_acp", - .parent = &clk_mout_corebus.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_pclk_acp = { - .clk = { - .name = "pclk_acp", - .parent = &clk_aclk_acp.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 }, -}; - -/* Core list of CMU_TOP side */ - -struct clk *clkset_aclk_top_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -struct clksrc_sources clkset_aclk = { - .sources = clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), -}; - -static struct clksrc_clk clk_aclk_200 = { - .clk = { - .name = "aclk_200", - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_100 = { - .clk = { - .name = "aclk_100", - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_aclk_160 = { - .clk = { - .name = "aclk_160", - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, -}; - -struct clksrc_clk clk_aclk_133 = { - .clk = { - .name = "aclk_133", - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 }, -}; - -static struct clk *clkset_vpllsrc_list[] = { - [0] = &clk_fin_vpll, - [1] = &clk_sclk_hdmi27m, -}; - -static struct clksrc_sources clkset_vpllsrc = { - .sources = clkset_vpllsrc_list, - .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list), -}; - -static struct clksrc_clk clk_vpllsrc = { - .clk = { - .name = "vpll_src", - .enable = exynos4_clksrc_mask_top_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_vpllsrc, - .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_sclk_vpll_list[] = { - [0] = &clk_vpllsrc.clk, - [1] = &clk_fout_vpll, -}; - -static struct clksrc_sources clkset_sclk_vpll = { - .sources = clkset_sclk_vpll_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), -}; - -struct clksrc_clk clk_sclk_vpll = { - .clk = { - .name = "sclk_vpll", - }, - .sources = &clkset_sclk_vpll, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "timers", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1<<24), - }, { - .name = "csis", - .devname = "s5p-mipi-csis.0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "csis", - .devname = "s5p-mipi-csis.1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "fimc", - .devname = "exynos4-fimc.0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "fimc", - .devname = "exynos4-fimc.1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "fimc", - .devname = "exynos4-fimc.2", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "fimc", - .devname = "exynos4-fimc.3", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "fimd", - .devname = "exynos4-fb.0", - .enable = exynos4_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.3", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "dwmmc", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "dac", - .devname = "s5p-sdo", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "mixer", - .devname = "s5p-mixer", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "vp", - .devname = "s5p-mixer", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "hdmi", - .devname = "exynos4-hdmi", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "hdmiphy", - .devname = "exynos4-hdmi", - .enable = exynos4_clk_hdmiphy_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "dacphy", - .devname = "s5p-sdo", - .enable = exynos4_clk_dac_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "adc", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "keypad", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "rtc", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "watchdog", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "usbhost", - .enable = exynos4_clk_ip_fsys_ctrl , - .ctrlbit = (1 << 12), - }, { - .name = "otg", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "spi", - .devname = "s3c64xx-spi.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "spi", - .devname = "s3c64xx-spi.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "s3c64xx-spi.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "iis", - .devname = "samsung-i2s.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "iis", - .devname = "samsung-i2s.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "ac97", - .devname = "samsung-ac97", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "fimg2d", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "mfc", - .devname = "s5p-mfc", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.2", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.3", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.4", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.5", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.6", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.7", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "i2c", - .devname = "s3c2440-hdmiphy-i2c", - .parent = &clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "SYSMMU_MDMA", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "SYSMMU_FIMC0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "SYSMMU_FIMC1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "SYSMMU_FIMC2", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "SYSMMU_FIMC3", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "SYSMMU_JPEG", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "SYSMMU_FIMD0", - .enable = exynos4_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_FIMD1", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_PCIe", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "SYSMMU_G2D", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "SYSMMU_ROTATOR", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_TV", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_MFC_L", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "SYSMMU_MFC_R", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 2), - } -}; - -static struct clk init_clocks[] = { - { - .name = "uart", - .devname = "s5pv210-uart.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "uart", - .devname = "s5pv210-uart.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s5pv210-uart.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s5pv210-uart.3", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s5pv210-uart.4", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "uart", - .devname = "s5pv210-uart.5", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 5), - } -}; - -static struct clk clk_pdma0 = { - .name = "dma", - .devname = "dma-pl330.0", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), -}; - -static struct clk clk_pdma1 = { - .name = "dma", - .devname = "dma-pl330.1", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), -}; - -struct clk *clkset_group_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &clk_xusbxti, - [2] = &clk_sclk_hdmi27m, - [3] = &clk_sclk_usbphy0, - [4] = &clk_sclk_usbphy1, - [5] = &clk_sclk_hdmiphy, - [6] = &clk_mout_mpll.clk, - [7] = &clk_mout_epll.clk, - [8] = &clk_sclk_vpll.clk, -}; - -struct clksrc_sources clkset_group = { - .sources = clkset_group_list, - .nr_sources = ARRAY_SIZE(clkset_group_list), -}; - -static struct clk *clkset_mout_g2d0_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -static struct clksrc_sources clkset_mout_g2d0 = { - .sources = clkset_mout_g2d0_list, - .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list), -}; - -static struct clksrc_clk clk_mout_g2d0 = { - .clk = { - .name = "mout_g2d0", - }, - .sources = &clkset_mout_g2d0, - .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_mout_g2d1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_mout_g2d1 = { - .sources = clkset_mout_g2d1_list, - .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list), -}; - -static struct clksrc_clk clk_mout_g2d1 = { - .clk = { - .name = "mout_g2d1", - }, - .sources = &clkset_mout_g2d1, - .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 }, -}; - -static struct clk *clkset_mout_g2d_list[] = { - [0] = &clk_mout_g2d0.clk, - [1] = &clk_mout_g2d1.clk, -}; - -static struct clksrc_sources clkset_mout_g2d = { - .sources = clkset_mout_g2d_list, - .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list), -}; - -static struct clk *clkset_mout_mfc0_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -static struct clksrc_sources clkset_mout_mfc0 = { - .sources = clkset_mout_mfc0_list, - .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list), -}; - -static struct clksrc_clk clk_mout_mfc0 = { - .clk = { - .name = "mout_mfc0", - }, - .sources = &clkset_mout_mfc0, - .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_mout_mfc1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_mout_mfc1 = { - .sources = clkset_mout_mfc1_list, - .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list), -}; - -static struct clksrc_clk clk_mout_mfc1 = { - .clk = { - .name = "mout_mfc1", - }, - .sources = &clkset_mout_mfc1, - .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 }, -}; - -static struct clk *clkset_mout_mfc_list[] = { - [0] = &clk_mout_mfc0.clk, - [1] = &clk_mout_mfc1.clk, -}; - -static struct clksrc_sources clkset_mout_mfc = { - .sources = clkset_mout_mfc_list, - .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list), -}; - -static struct clk *clkset_sclk_dac_list[] = { - [0] = &clk_sclk_vpll.clk, - [1] = &clk_sclk_hdmiphy, -}; - -static struct clksrc_sources clkset_sclk_dac = { - .sources = clkset_sclk_dac_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list), -}; - -static struct clksrc_clk clk_sclk_dac = { - .clk = { - .name = "sclk_dac", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_sclk_dac, - .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 }, -}; - -static struct clksrc_clk clk_sclk_pixel = { - .clk = { - .name = "sclk_pixel", - .parent = &clk_sclk_vpll.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 }, -}; - -static struct clk *clkset_sclk_hdmi_list[] = { - [0] = &clk_sclk_pixel.clk, - [1] = &clk_sclk_hdmiphy, -}; - -static struct clksrc_sources clkset_sclk_hdmi = { - .sources = clkset_sclk_hdmi_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list), -}; - -static struct clksrc_clk clk_sclk_hdmi = { - .clk = { - .name = "sclk_hdmi", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_sclk_hdmi, - .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_sclk_mixer_list[] = { - [0] = &clk_sclk_dac.clk, - [1] = &clk_sclk_hdmi.clk, -}; - -static struct clksrc_sources clkset_sclk_mixer = { - .sources = clkset_sclk_mixer_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list), -}; - -static struct clksrc_clk clk_sclk_mixer = { - .clk = { - .name = "sclk_mixer", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_sclk_mixer, - .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk *sclk_tv[] = { - &clk_sclk_dac, - &clk_sclk_pixel, - &clk_sclk_hdmi, - &clk_sclk_mixer, -}; - -static struct clksrc_clk clk_dout_mmc0 = { - .clk = { - .name = "dout_mmc0", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc1 = { - .clk = { - .name = "dout_mmc1", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc2 = { - .clk = { - .name = "dout_mmc2", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc3 = { - .clk = { - .name = "dout_mmc3", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc4 = { - .clk = { - .name = "dout_mmc4", - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_pwm", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .devname = "s5p-mipi-csis.0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .devname = "s5p-mipi-csis.1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 28), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.2", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.3", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.0", - .enable = exynos4_clksrc_mask_lcd0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimg2d", - }, - .sources = &clkset_mout_g2d, - .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mfc", - .devname = "s5p-mfc", - }, - .sources = &clkset_mout_mfc, - .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_dwmmc", - .parent = &clk_dout_mmc4.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 }, - } -}; - -static struct clksrc_clk clk_sclk_uart0 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.0", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uart1 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.1", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uart2 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.2", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uart3 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.3", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .parent = &clk_dout_mmc0.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 0), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .parent = &clk_dout_mmc1.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 4), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .parent = &clk_dout_mmc2.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 8), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk clk_sclk_mmc3 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.3", - .parent = &clk_dout_mmc3.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 12), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.0", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.1", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi2 = { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.2", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, -}; - -/* Clock initialization code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_sclk_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_moutcore, - &clk_coreclk, - &clk_armclk, - &clk_aclk_corem0, - &clk_aclk_cores, - &clk_aclk_corem1, - &clk_periphclk, - &clk_mout_corebus, - &clk_sclk_dmc, - &clk_aclk_cored, - &clk_aclk_corep, - &clk_aclk_acp, - &clk_pclk_acp, - &clk_vpllsrc, - &clk_sclk_vpll, - &clk_aclk_200, - &clk_aclk_100, - &clk_aclk_160, - &clk_aclk_133, - &clk_dout_mmc0, - &clk_dout_mmc1, - &clk_dout_mmc2, - &clk_dout_mmc3, - &clk_dout_mmc4, - &clk_mout_mfc0, - &clk_mout_mfc1, -}; - -static struct clk *clk_cdev[] = { - &clk_pdma0, - &clk_pdma1, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uart0, - &clk_sclk_uart1, - &clk_sclk_uart2, - &clk_sclk_uart3, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_mmc3, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_sclk_spi2, - -}; - -static struct clk_lookup exynos4_clk_lookup[] = { - CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk), - CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk), - CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk), - CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk), - CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), - CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &clk_sclk_spi2.clk), -}; - -static int xtal_rate; - -static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) -{ - if (soc_is_exynos4210()) - return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), - pll_4508); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0)); - else - return 0; -} - -static struct clk_ops exynos4_fout_apll_ops = { - .get_rate = exynos4_fout_apll_get_rate, -}; - -static u32 vpll_div[][8] = { - { 54000000, 3, 53, 3, 1024, 0, 17, 0 }, - { 108000000, 3, 53, 2, 1024, 0, 17, 0 }, -}; - -static unsigned long exynos4_vpll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int vpll_con0, vpll_con1 = 0; - unsigned int i; - - /* Return if nothing changed */ - if (clk->rate == rate) - return 0; - - vpll_con0 = __raw_readl(S5P_VPLL_CON0); - vpll_con0 &= ~(0x1 << 27 | \ - PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ - PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ - PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); - - vpll_con1 = __raw_readl(S5P_VPLL_CON1); - vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \ - PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \ - PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT); - - for (i = 0; i < ARRAY_SIZE(vpll_div); i++) { - if (vpll_div[i][0] == rate) { - vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT; - vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT; - vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT; - vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT; - vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT; - vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT; - vpll_con0 |= vpll_div[i][7] << 27; - break; - } - } - - if (i == ARRAY_SIZE(vpll_div)) { - printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", - __func__); - return -EINVAL; - } - - __raw_writel(vpll_con0, S5P_VPLL_CON0); - __raw_writel(vpll_con1, S5P_VPLL_CON1); - - /* Wait for VPLL lock */ - while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT))) - continue; - - clk->rate = rate; - return 0; -} - -static struct clk_ops exynos4_vpll_ops = { - .get_rate = exynos4_vpll_get_rate, - .set_rate = exynos4_vpll_set_rate, -}; - -void __init_or_cpufreq exynos4_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long apll = 0; - unsigned long mpll = 0; - unsigned long epll = 0; - unsigned long vpll = 0; - unsigned long vpllsrc; - unsigned long xtal; - unsigned long armclk; - unsigned long sclk_dmc; - unsigned long aclk_200; - unsigned long aclk_100; - unsigned long aclk_160; - unsigned long aclk_133; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - - xtal_rate = xtal; - - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - if (soc_is_exynos4210()) { - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), - pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), - pll_4508); - epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), - __raw_readl(S5P_EPLL_CON1), pll_4600); - - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650c); - } else if (soc_is_exynos4212() || soc_is_exynos4412()) { - apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0)); - mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0)); - epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0), - __raw_readl(S5P_EPLL_CON1)); - - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1)); - } else { - /* nothing */ - } - - clk_fout_apll.ops = &exynos4_fout_apll_ops; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_vpll.ops = &exynos4_vpll_ops; - clk_fout_vpll.rate = vpll; - - printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", - apll, mpll, epll, vpll); - - armclk = clk_get_rate(&clk_armclk.clk); - sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk); - - aclk_200 = clk_get_rate(&clk_aclk_200.clk); - aclk_100 = clk_get_rate(&clk_aclk_100.clk); - aclk_160 = clk_get_rate(&clk_aclk_160.clk); - aclk_133 = clk_get_rate(&clk_aclk_133.clk); - - printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" - "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", - armclk, sclk_dmc, aclk_200, - aclk_100, aclk_160, aclk_133); - - clk_f.rate = armclk; - clk_h.rate = sclk_dmc; - clk_p.rate = aclk_100; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - &clk_sclk_hdmi27m, - &clk_sclk_hdmiphy, - &clk_sclk_usbphy0, - &clk_sclk_usbphy1, -}; - -#ifdef CONFIG_PM_SLEEP -static int exynos4_clock_suspend(void) -{ - s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); - return 0; -} - -static void exynos4_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); -} - -#else -#define exynos4_clock_suspend NULL -#define exynos4_clock_resume NULL -#endif - -struct syscore_ops exynos4_clock_syscore_ops = { - .suspend = exynos4_clock_suspend, - .resume = exynos4_clock_resume, -}; - -void __init exynos4_register_clocks(void) -{ - int ptr; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) - s3c_register_clksrc(sclk_tv[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) - s3c_register_clksrc(clksrc_cdev[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) - s3c_disable_clocks(clk_cdev[ptr], 1); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup)); - - register_syscore_ops(&exynos4_clock_syscore_ops); - s3c24xx_register_clock(&dummy_apb_pclk); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 6de298c5d2d3..e6cc50e94a58 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -26,10 +26,12 @@ #include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/cacheflush.h> #include <mach/regs-irq.h> #include <mach/regs-pmu.h> #include <mach/regs-gpio.h> +#include <mach/pmu.h> #include <plat/cpu.h> #include <plat/clock.h> @@ -45,10 +47,20 @@ #include <plat/regs-serial.h> #include "common.h" +#define L2_AUX_VAL 0x7C470001 +#define L2_AUX_MASK 0xC200ffff static const char name_exynos4210[] = "EXYNOS4210"; static const char name_exynos4212[] = "EXYNOS4212"; static const char name_exynos4412[] = "EXYNOS4412"; +static const char name_exynos5250[] = "EXYNOS5250"; + +static void exynos4_map_io(void); +static void exynos5_map_io(void); +static void exynos4_init_clocks(int xtal); +static void exynos5_init_clocks(int xtal); +static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no); +static int exynos_init(void); static struct cpu_table cpu_ids[] __initdata = { { @@ -56,7 +68,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, + .init_uarts = exynos_init_uarts, .init = exynos_init, .name = name_exynos4210, }, { @@ -64,7 +76,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, + .init_uarts = exynos_init_uarts, .init = exynos_init, .name = name_exynos4212, }, { @@ -72,9 +84,17 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, + .init_uarts = exynos_init_uarts, .init = exynos_init, .name = name_exynos4412, + }, { + .idcode = EXYNOS5250_SOC_ID, + .idmask = EXYNOS5_SOC_MASK, + .map_io = exynos5_map_io, + .init_clocks = exynos5_init_clocks, + .init_uarts = exynos_init_uarts, + .init = exynos_init, + .name = name_exynos5250, }, }; @@ -83,10 +103,14 @@ static struct cpu_table cpu_ids[] __initdata = { static struct map_desc exynos_iodesc[] __initdata = { { .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID), + .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID), .length = SZ_4K, .type = MT_DEVICE, - }, { + }, +}; + +static struct map_desc exynos4_iodesc[] __initdata = { + { .virtual = (unsigned long)S3C_VA_SYS, .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON), .length = SZ_64K, @@ -136,11 +160,7 @@ static struct map_desc exynos_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS4_PA_UART), .length = SZ_512K, .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc[] __initdata = { - { + }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, @@ -156,24 +176,14 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_GPIO1, - .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO2, - .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO3, - .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3), - .length = SZ_256, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_DMC0, .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), - .length = SZ_4K, + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC1, + .pfn = __phys_to_pfn(EXYNOS4_PA_DMC1), + .length = SZ_64K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S3C_VA_USB_HSPHY, @@ -201,19 +211,80 @@ static struct map_desc exynos4_iodesc1[] __initdata = { }, }; -static void exynos_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} +static struct map_desc exynos5_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), + .length = 144 * SZ_1K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_PMU, + .pfn = __phys_to_pfn(EXYNOS5_PA_PMU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_COMBINER_BASE, + .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(EXYNOS5_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_CPU, + .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_DIST, + .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST), + .length = SZ_64K, + .type = MT_DEVICE, + }, +}; void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); } +void exynos5_restart(char mode, const char *cmd) +{ + __raw_writel(0x1, EXYNOS_SWRESET); +} + /* * exynos_map_io * @@ -233,7 +304,7 @@ void __init exynos_init_io(struct map_desc *mach_desc, int size) s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } -void __init exynos4_map_io(void) +static void __init exynos4_map_io(void) { iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); @@ -264,7 +335,22 @@ void __init exynos4_map_io(void) s5p_hdmi_setname("exynos4-hdmi"); } -void __init exynos4_init_clocks(int xtal) +static void __init exynos5_map_io(void) +{ + iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); + + s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0); + s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1; + s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; + s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; + + /* The I2C bus controllers are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); +} + +static void __init exynos4_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); @@ -280,6 +366,17 @@ void __init exynos4_init_clocks(int xtal) exynos4_setup_clocks(); } +static void __init exynos5_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + + exynos5_register_clocks(); + exynos5_setup_clocks(); +} + #define COMBINER_ENABLE_SET 0x0 #define COMBINER_ENABLE_CLEAR 0x4 #define COMBINER_INT_STATUS 0xC @@ -353,7 +450,14 @@ static struct irq_chip combiner_chip = { static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) { - if (combiner_nr >= MAX_COMBINER_NR) + unsigned int max_nr; + + if (soc_is_exynos5250()) + max_nr = EXYNOS5_MAX_COMBINER_NR; + else + max_nr = EXYNOS4_MAX_COMBINER_NR; + + if (combiner_nr >= max_nr) BUG(); if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0) BUG(); @@ -364,8 +468,14 @@ static void __init combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start) { unsigned int i; + unsigned int max_nr; - if (combiner_nr >= MAX_COMBINER_NR) + if (soc_is_exynos5250()) + max_nr = EXYNOS5_MAX_COMBINER_NR; + else + max_nr = EXYNOS4_MAX_COMBINER_NR; + + if (combiner_nr >= max_nr) BUG(); combiner_data[combiner_nr].base = base; @@ -408,7 +518,7 @@ void __init exynos4_init_irq(void) of_irq_init(exynos4_dt_irq_match); #endif - for (irq = 0; irq < MAX_COMBINER_NR; irq++) { + for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), COMBINER_IRQ(irq, 0)); @@ -423,60 +533,144 @@ void __init exynos4_init_irq(void) s5p_init_irq(NULL, 0); } +void __init exynos5_init_irq(void) +{ + int irq; + + gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + + for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) { + combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), + COMBINER_IRQ(irq, 0)); + combiner_cascade_irq(irq, IRQ_SPI(irq)); + } + + /* + * The parameters of s5p_init_irq() are for VIC init. + * Theses parameters should be NULL and 0 because EXYNOS4 + * uses GIC instead of VIC. + */ + s5p_init_irq(NULL, 0); +} + struct bus_type exynos4_subsys = { .name = "exynos4-core", .dev_name = "exynos4-core", }; +struct bus_type exynos5_subsys = { + .name = "exynos5-core", + .dev_name = "exynos5-core", +}; + static struct device exynos4_dev = { .bus = &exynos4_subsys, }; -static int __init exynos4_core_init(void) +static struct device exynos5_dev = { + .bus = &exynos5_subsys, +}; + +static int __init exynos_core_init(void) { - return subsys_system_register(&exynos4_subsys, NULL); + if (soc_is_exynos5250()) + return subsys_system_register(&exynos5_subsys, NULL); + else + return subsys_system_register(&exynos4_subsys, NULL); } -core_initcall(exynos4_core_init); +core_initcall(exynos_core_init); #ifdef CONFIG_CACHE_L2X0 static int __init exynos4_l2x0_cache_init(void) { - /* TAG, Data Latency Control: 2cycle */ - __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); + if (soc_is_exynos5250()) + return 0; + + int ret; + ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); + if (!ret) { + l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); + clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); + return 0; + } - if (soc_is_exynos4210()) - __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) { + l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC; + /* TAG, Data Latency Control: 2 cycles */ + l2x0_saved_regs.tag_latency = 0x110; + + if (soc_is_exynos4212() || soc_is_exynos4412()) + l2x0_saved_regs.data_latency = 0x120; + else + l2x0_saved_regs.data_latency = 0x110; - /* L2X0 Prefetch Control */ - __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); + l2x0_saved_regs.prefetch_ctrl = 0x30000007; + l2x0_saved_regs.pwr_ctrl = + (L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN); - /* L2X0 Power Control */ - __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN, - S5P_VA_L2CC + L2X0_POWER_CTRL); + l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); - l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff); + __raw_writel(l2x0_saved_regs.tag_latency, + S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); + __raw_writel(l2x0_saved_regs.data_latency, + S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + /* L2X0 Prefetch Control */ + __raw_writel(l2x0_saved_regs.prefetch_ctrl, + S5P_VA_L2CC + L2X0_PREFETCH_CTRL); + + /* L2X0 Power Control */ + __raw_writel(l2x0_saved_regs.pwr_ctrl, + S5P_VA_L2CC + L2X0_POWER_CTRL); + + clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); + clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs)); + } + + l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK); return 0; } - early_initcall(exynos4_l2x0_cache_init); #endif -int __init exynos_init(void) +static int __init exynos5_l2_cache_init(void) { - printk(KERN_INFO "EXYNOS: Initializing architecture\n"); + unsigned int val; + + if (!soc_is_exynos5250()) + return 0; + + asm volatile("mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #(1 << 2)\n" /* cache disable */ + "mcr p15, 0, %0, c1, c0, 0\n" + "mrc p15, 1, %0, c9, c0, 2\n" + : "=r"(val)); + + val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0); + + asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); + asm volatile("mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #(1 << 2)\n" /* cache enable */ + "mcr p15, 0, %0, c1, c0, 0\n" + : : "r"(val)); + + return 0; +} +early_initcall(exynos5_l2_cache_init); - /* set idle function */ - pm_idle = exynos_idle; +static int __init exynos_init(void) +{ + printk(KERN_INFO "EXYNOS: Initializing architecture\n"); - return device_register(&exynos4_dev); + if (soc_is_exynos5250()) + return device_register(&exynos5_dev); + else + return device_register(&exynos4_dev); } /* uart registration process */ -void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no) { struct s3c2410_uartcfg *tcfg = cfg; u32 ucnt; @@ -484,69 +678,138 @@ void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) for (ucnt = 0; ucnt < no; ucnt++, tcfg++) tcfg->has_fracval = 1; - s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no); + if (soc_is_exynos5250()) + s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no); + else + s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); } +static void __iomem *exynos_eint_base; + static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; -static unsigned int exynos4_get_irq_nr(unsigned int number) +static inline int exynos4_irq_to_gpio(unsigned int irq) { - u32 ret = 0; + if (irq < IRQ_EINT(0)) + return -EINVAL; - switch (number) { - case 0 ... 3: - ret = (number + IRQ_EINT0); - break; - case 4 ... 7: - ret = (number + (IRQ_EINT4 - 4)); - break; - case 8 ... 15: - ret = (number + (IRQ_EINT8 - 8)); - break; - default: - printk(KERN_ERR "number available : %d\n", number); - } + irq -= IRQ_EINT(0); + if (irq < 8) + return EXYNOS4_GPX0(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS4_GPX1(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS4_GPX2(irq); - return ret; + irq -= 8; + if (irq < 8) + return EXYNOS4_GPX3(irq); + + return -EINVAL; } -static inline void exynos4_irq_eint_mask(struct irq_data *data) +static inline int exynos5_irq_to_gpio(unsigned int irq) +{ + if (irq < IRQ_EINT(0)) + return -EINVAL; + + irq -= IRQ_EINT(0); + if (irq < 8) + return EXYNOS5_GPX0(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS5_GPX1(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS5_GPX2(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS5_GPX3(irq); + + return -EINVAL; +} + +static unsigned int exynos4_eint0_15_src_int[16] = { + EXYNOS4_IRQ_EINT0, + EXYNOS4_IRQ_EINT1, + EXYNOS4_IRQ_EINT2, + EXYNOS4_IRQ_EINT3, + EXYNOS4_IRQ_EINT4, + EXYNOS4_IRQ_EINT5, + EXYNOS4_IRQ_EINT6, + EXYNOS4_IRQ_EINT7, + EXYNOS4_IRQ_EINT8, + EXYNOS4_IRQ_EINT9, + EXYNOS4_IRQ_EINT10, + EXYNOS4_IRQ_EINT11, + EXYNOS4_IRQ_EINT12, + EXYNOS4_IRQ_EINT13, + EXYNOS4_IRQ_EINT14, + EXYNOS4_IRQ_EINT15, +}; + +static unsigned int exynos5_eint0_15_src_int[16] = { + EXYNOS5_IRQ_EINT0, + EXYNOS5_IRQ_EINT1, + EXYNOS5_IRQ_EINT2, + EXYNOS5_IRQ_EINT3, + EXYNOS5_IRQ_EINT4, + EXYNOS5_IRQ_EINT5, + EXYNOS5_IRQ_EINT6, + EXYNOS5_IRQ_EINT7, + EXYNOS5_IRQ_EINT8, + EXYNOS5_IRQ_EINT9, + EXYNOS5_IRQ_EINT10, + EXYNOS5_IRQ_EINT11, + EXYNOS5_IRQ_EINT12, + EXYNOS5_IRQ_EINT13, + EXYNOS5_IRQ_EINT14, + EXYNOS5_IRQ_EINT15, +}; +static inline void exynos_irq_eint_mask(struct irq_data *data) { u32 mask; spin_lock(&eint_lock); - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask |= eint_irq_to_bit(data->irq); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); + mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); + mask |= EINT_OFFSET_BIT(data->irq); + __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); spin_unlock(&eint_lock); } -static void exynos4_irq_eint_unmask(struct irq_data *data) +static void exynos_irq_eint_unmask(struct irq_data *data) { u32 mask; spin_lock(&eint_lock); - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask &= ~(eint_irq_to_bit(data->irq)); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); + mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); + mask &= ~(EINT_OFFSET_BIT(data->irq)); + __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); spin_unlock(&eint_lock); } -static inline void exynos4_irq_eint_ack(struct irq_data *data) +static inline void exynos_irq_eint_ack(struct irq_data *data) { - __raw_writel(eint_irq_to_bit(data->irq), - S5P_EINT_PEND(EINT_REG_NR(data->irq))); + __raw_writel(EINT_OFFSET_BIT(data->irq), + EINT_PEND(exynos_eint_base, data->irq)); } -static void exynos4_irq_eint_maskack(struct irq_data *data) +static void exynos_irq_eint_maskack(struct irq_data *data) { - exynos4_irq_eint_mask(data); - exynos4_irq_eint_ack(data); + exynos_irq_eint_mask(data); + exynos_irq_eint_ack(data); } -static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type) +static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type) { int offs = EINT_OFFSET(data->irq); int shift; @@ -583,39 +846,27 @@ static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type) mask = 0x7 << shift; spin_lock(&eint_lock); - ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq))); + ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq)); ctrl &= ~mask; ctrl |= newvalue << shift; - __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq))); + __raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq)); spin_unlock(&eint_lock); - switch (offs) { - case 0 ... 7: - s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); - break; - case 8 ... 15: - s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); - break; - case 16 ... 23: - s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); - break; - case 24 ... 31: - s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); - break; - default: - printk(KERN_ERR "No such irq number %d", offs); - } + if (soc_is_exynos5250()) + s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); + else + s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); return 0; } -static struct irq_chip exynos4_irq_eint = { - .name = "exynos4-eint", - .irq_mask = exynos4_irq_eint_mask, - .irq_unmask = exynos4_irq_eint_unmask, - .irq_mask_ack = exynos4_irq_eint_maskack, - .irq_ack = exynos4_irq_eint_ack, - .irq_set_type = exynos4_irq_eint_set_type, +static struct irq_chip exynos_irq_eint = { + .name = "exynos-eint", + .irq_mask = exynos_irq_eint_mask, + .irq_unmask = exynos_irq_eint_unmask, + .irq_mask_ack = exynos_irq_eint_maskack, + .irq_ack = exynos_irq_eint_ack, + .irq_set_type = exynos_irq_eint_set_type, #ifdef CONFIG_PM .irq_set_wake = s3c_irqext_wake, #endif @@ -630,12 +881,12 @@ static struct irq_chip exynos4_irq_eint = { * * Each EINT pend/mask registers handle eight of them. */ -static inline void exynos4_irq_demux_eint(unsigned int start) +static inline void exynos_irq_demux_eint(unsigned int start) { unsigned int irq; - u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); - u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); + u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start)); + u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start)); status &= ~mask; status &= 0xff; @@ -647,16 +898,16 @@ static inline void exynos4_irq_demux_eint(unsigned int start) } } -static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); chained_irq_enter(chip, desc); - exynos4_irq_demux_eint(IRQ_EINT(16)); - exynos4_irq_demux_eint(IRQ_EINT(24)); + exynos_irq_demux_eint(IRQ_EINT(16)); + exynos_irq_demux_eint(IRQ_EINT(24)); chained_irq_exit(chip, desc); } -static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) +static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) { u32 *irq_data = irq_get_handler_data(irq); struct irq_chip *chip = irq_get_chip(irq); @@ -673,27 +924,44 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) chained_irq_exit(chip, desc); } -int __init exynos4_init_irq_eint(void) +static int __init exynos_init_irq_eint(void) { int irq; + if (soc_is_exynos5250()) + exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K); + else + exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K); + + if (exynos_eint_base == NULL) { + pr_err("unable to ioremap for EINT base address\n"); + return -ENOMEM; + } + for (irq = 0 ; irq <= 31 ; irq++) { - irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint, + irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint, handle_level_irq); set_irq_flags(IRQ_EINT(irq), IRQF_VALID); } - irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31); + irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31); for (irq = 0 ; irq <= 15 ; irq++) { eint0_15_data[irq] = IRQ_EINT(irq); - irq_set_handler_data(exynos4_get_irq_nr(irq), - &eint0_15_data[irq]); - irq_set_chained_handler(exynos4_get_irq_nr(irq), - exynos4_irq_eint0_15); + if (soc_is_exynos5250()) { + irq_set_handler_data(exynos5_eint0_15_src_int[irq], + &eint0_15_data[irq]); + irq_set_chained_handler(exynos5_eint0_15_src_int[irq], + exynos_irq_eint0_15); + } else { + irq_set_handler_data(exynos4_eint0_15_src_int[irq], + &eint0_15_data[irq]); + irq_set_chained_handler(exynos4_eint0_15_src_int[irq], + exynos_irq_eint0_15); + } } return 0; } -arch_initcall(exynos4_init_irq_eint); +arch_initcall(exynos_init_irq_eint); diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 1ac49de0f398..677b5467df18 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -12,30 +12,44 @@ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H #define __ARCH_ARM_MACH_EXYNOS_COMMON_H +extern struct sys_timer exynos4_timer; + void exynos_init_io(struct map_desc *mach_desc, int size); void exynos4_init_irq(void); +void exynos5_init_irq(void); +void exynos4_restart(char mode, const char *cmd); +void exynos5_restart(char mode, const char *cmd); +#ifdef CONFIG_ARCH_EXYNOS4 void exynos4_register_clocks(void); void exynos4_setup_clocks(void); -void exynos4210_register_clocks(void); -void exynos4212_register_clocks(void); +#else +#define exynos4_register_clocks() +#define exynos4_setup_clocks() +#endif -void exynos4_restart(char mode, const char *cmd); +#ifdef CONFIG_ARCH_EXYNOS5 +void exynos5_register_clocks(void); +void exynos5_setup_clocks(void); -extern struct sys_timer exynos4_timer; +#else +#define exynos5_register_clocks() +#define exynos5_setup_clocks() +#endif + +#ifdef CONFIG_CPU_EXYNOS4210 +void exynos4210_register_clocks(void); -#ifdef CONFIG_ARCH_EXYNOS -extern int exynos_init(void); -extern void exynos4_map_io(void); -extern void exynos4_init_clocks(int xtal); -extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); +#else +#define exynos4210_register_clocks() +#endif + +#ifdef CONFIG_SOC_EXYNOS4212 +void exynos4212_register_clocks(void); #else -#define exynos4_init_clocks NULL -#define exynos4_init_uarts NULL -#define exynos4_map_io NULL -#define exynos_init NULL +#define exynos4212_register_clocks() #endif #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 4ebb382c5979..33ab4e7558af 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -11,25 +11,53 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/cpuidle.h> +#include <linux/cpu_pm.h> #include <linux/io.h> #include <linux/export.h> #include <linux/time.h> #include <asm/proc-fns.h> +#include <asm/smp_scu.h> +#include <asm/suspend.h> +#include <asm/unified.h> +#include <mach/regs-pmu.h> +#include <mach/pmu.h> + +#include <plat/cpu.h> + +#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0)) +#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (S5P_VA_SYSRAM + 0x20) : S5P_INFORM1)) + +#define S5P_CHECK_AFTR 0xFCBA0D10 static int exynos4_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); +static int exynos4_enter_lowpower(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index); -static struct cpuidle_state exynos4_cpuidle_set[] = { +static struct cpuidle_state exynos4_cpuidle_set[] __initdata = { [0] = { .enter = exynos4_enter_idle, .exit_latency = 1, .target_residency = 100000, .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "IDLE", + .name = "C0", .desc = "ARM clock gating(WFI)", }, + [1] = { + .enter = exynos4_enter_lowpower, + .exit_latency = 300, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C1", + .desc = "ARM power down", + }, }; static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); @@ -39,9 +67,102 @@ static struct cpuidle_driver exynos4_idle_driver = { .owner = THIS_MODULE, }; +/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ +static void exynos4_set_wakeupmask(void) +{ + __raw_writel(0x0000ff3e, S5P_WAKEUP_MASK); +} + +static unsigned int g_pwr_ctrl, g_diag_reg; + +static void save_cpu_arch_register(void) +{ + /*read power control register*/ + asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc"); + /*read diagnostic register*/ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); + return; +} + +static void restore_cpu_arch_register(void) +{ + /*write power control register*/ + asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc"); + /*write diagnostic register*/ + asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); + return; +} + +static int idle_finisher(unsigned long flags) +{ + cpu_do_idle(); + return 1; +} + +static int exynos4_enter_core0_aftr(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct timeval before, after; + int idle_time; + unsigned long tmp; + + local_irq_disable(); + do_gettimeofday(&before); + + exynos4_set_wakeupmask(); + + /* Set value of power down register for aftr mode */ + exynos4_sys_powerdown_conf(SYS_AFTR); + + __raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR); + __raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG); + + save_cpu_arch_register(); + + /* Setting Central Sequence Register for power down mode */ + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + tmp &= ~S5P_CENTRAL_LOWPWR_CFG; + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + + cpu_pm_enter(); + cpu_suspend(0, idle_finisher); + +#ifdef CONFIG_SMP + scu_enable(S5P_VA_SCU); +#endif + cpu_pm_exit(); + + restore_cpu_arch_register(); + + /* + * If PMU failed while entering sleep mode, WFI will be + * ignored by PMU and then exiting cpu_do_idle(). + * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically + * in this situation. + */ + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { + tmp |= S5P_CENTRAL_LOWPWR_CFG; + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + } + + /* Clear wakeup state register */ + __raw_writel(0x0, S5P_WAKEUP_STAT); + + do_gettimeofday(&after); + + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + + dev->last_residency = idle_time; + return index; +} + static int exynos4_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, - int index) + int index) { struct timeval before, after; int idle_time; @@ -60,6 +181,22 @@ static int exynos4_enter_idle(struct cpuidle_device *dev, return index; } +static int exynos4_enter_lowpower(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + int new_index = index; + + /* This mode only can be entered when other core's are offline */ + if (num_online_cpus() > 1) + new_index = drv->safe_state_index; + + if (new_index == 0) + return exynos4_enter_idle(dev, drv, new_index); + else + return exynos4_enter_core0_aftr(dev, drv, new_index); +} + static int __init exynos4_init_cpuidle(void) { int i, max_cpuidle_state, cpu_id; @@ -74,19 +211,25 @@ static int __init exynos4_init_cpuidle(void) memcpy(&drv->states[i], &exynos4_cpuidle_set[i], sizeof(struct cpuidle_state)); } + drv->safe_state_index = 0; cpuidle_register_driver(&exynos4_idle_driver); for_each_cpu(cpu_id, cpu_online_mask) { device = &per_cpu(exynos4_cpuidle_device, cpu_id); device->cpu = cpu_id; - device->state_count = drv->state_count; + if (cpu_id == 0) + device->state_count = (sizeof(exynos4_cpuidle_set) / + sizeof(struct cpuidle_state)); + else + device->state_count = 1; /* Support IDLE only */ if (cpuidle_register_device(device)) { printk(KERN_ERR "CPUidle register device failed\n,"); return -EIO; } } + return 0; } device_initcall(exynos4_init_cpuidle); diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c index f57a3de8e1d2..50ce5b0adcf1 100644 --- a/arch/arm/mach-exynos/dev-ahci.c +++ b/arch/arm/mach-exynos/dev-ahci.c @@ -242,8 +242,8 @@ static struct resource exynos4_ahci_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_SATA, - .end = IRQ_SATA, + .start = EXYNOS4_IRQ_SATA, + .end = EXYNOS4_IRQ_SATA, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index 5a9f9c2e53bf..7199e1ae79b4 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -304,8 +304,8 @@ static struct resource exynos4_ac97_resource[] = { .flags = IORESOURCE_DMA, }, [4] = { - .start = IRQ_AC97, - .end = IRQ_AC97, + .start = EXYNOS4_IRQ_AC97, + .end = EXYNOS4_IRQ_AC97, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c new file mode 100644 index 000000000000..2e85c022fd16 --- /dev/null +++ b/arch/arm/mach-exynos/dev-uart.c @@ -0,0 +1,78 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Base EXYNOS UART resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/devs.h> + +#define EXYNOS_UART_RESOURCE(_series, _nr) \ +static struct resource exynos##_series##_uart##_nr##_resource[] = { \ + [0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART), \ + [1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr), \ +}; + +EXYNOS_UART_RESOURCE(4, 0) +EXYNOS_UART_RESOURCE(4, 1) +EXYNOS_UART_RESOURCE(4, 2) +EXYNOS_UART_RESOURCE(4, 3) + +struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = { + [0] = { + .resources = exynos4_uart0_resource, + .nr_resources = ARRAY_SIZE(exynos4_uart0_resource), + }, + [1] = { + .resources = exynos4_uart1_resource, + .nr_resources = ARRAY_SIZE(exynos4_uart1_resource), + }, + [2] = { + .resources = exynos4_uart2_resource, + .nr_resources = ARRAY_SIZE(exynos4_uart2_resource), + }, + [3] = { + .resources = exynos4_uart3_resource, + .nr_resources = ARRAY_SIZE(exynos4_uart3_resource), + }, +}; + +EXYNOS_UART_RESOURCE(5, 0) +EXYNOS_UART_RESOURCE(5, 1) +EXYNOS_UART_RESOURCE(5, 2) +EXYNOS_UART_RESOURCE(5, 3) + +struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = { + [0] = { + .resources = exynos5_uart0_resource, + .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), + }, + [1] = { + .resources = exynos5_uart1_resource, + .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), + }, + [2] = { + .resources = exynos5_uart2_resource, + .nr_resources = ARRAY_SIZE(exynos5_uart2_resource), + }, + [3] = { + .resources = exynos5_uart3_resource, + .nr_resources = ARRAY_SIZE(exynos5_uart3_resource), + }, +}; diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index b10fcd270f07..3983abee4264 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -29,6 +29,7 @@ #include <asm/irq.h> #include <plat/devs.h> #include <plat/irqs.h> +#include <plat/cpu.h> #include <mach/map.h> #include <mach/irqs.h> @@ -36,7 +37,7 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -u8 pdma0_peri[] = { +static u8 exynos4210_pdma0_peri[] = { DMACH_PCM0_RX, DMACH_PCM0_TX, DMACH_PCM2_RX, @@ -69,28 +70,47 @@ u8 pdma0_peri[] = { DMACH_AC97_PCMOUT, }; -struct dma_pl330_platdata exynos4_pdma0_pdata = { - .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri_id = pdma0_peri, +static u8 exynos4212_pdma0_peri[] = { + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM2_RX, + DMACH_PCM2_TX, + DMACH_MIPI_HSI0, + DMACH_MIPI_HSI1, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_I2S0S_TX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_SLIMBUS0_RX, + DMACH_SLIMBUS0_TX, + DMACH_SLIMBUS2_RX, + DMACH_SLIMBUS2_TX, + DMACH_SLIMBUS4_RX, + DMACH_SLIMBUS4_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_MIPI_HSI4, + DMACH_MIPI_HSI5, }; -struct amba_device exynos4_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_pdma0_pdata, - }, - .res = { - .start = EXYNOS4_PA_PDMA0, - .end = EXYNOS4_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +struct dma_pl330_platdata exynos4_pdma0_pdata; + +static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, + EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata); -u8 pdma1_peri[] = { +static u8 exynos4210_pdma1_peri[] = { DMACH_PCM0_RX, DMACH_PCM0_TX, DMACH_PCM1_RX, @@ -118,39 +138,94 @@ u8 pdma1_peri[] = { DMACH_SLIMBUS5_TX, }; -struct dma_pl330_platdata exynos4_pdma1_pdata = { - .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri_id = pdma1_peri, +static u8 exynos4212_pdma1_peri[] = { + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MIPI_HSI2, + DMACH_MIPI_HSI3, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_I2S0S_TX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_SLIMBUS1_RX, + DMACH_SLIMBUS1_TX, + DMACH_SLIMBUS3_RX, + DMACH_SLIMBUS3_TX, + DMACH_SLIMBUS5_RX, + DMACH_SLIMBUS5_TX, + DMACH_SLIMBUS0AUX_RX, + DMACH_SLIMBUS0AUX_TX, + DMACH_SPDIF, + DMACH_MIPI_HSI6, + DMACH_MIPI_HSI7, }; -struct amba_device exynos4_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_pdma1_pdata, - }, - .res = { - .start = EXYNOS4_PA_PDMA1, - .end = EXYNOS4_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, +static struct dma_pl330_platdata exynos4_pdma1_pdata; + +static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, + EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata); + +static u8 mdma_peri[] = { + DMACH_MTOM_0, + DMACH_MTOM_1, + DMACH_MTOM_2, + DMACH_MTOM_3, + DMACH_MTOM_4, + DMACH_MTOM_5, + DMACH_MTOM_6, + DMACH_MTOM_7, +}; + +static struct dma_pl330_platdata exynos4_mdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(mdma_peri), + .peri_id = mdma_peri, }; +static AMBA_AHB_DEVICE(exynos4_mdma1, "dma-pl330.2", 0x00041330, + EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata); + static int __init exynos4_dma_init(void) { if (of_have_populated_dt()) return 0; + if (soc_is_exynos4210()) { + exynos4_pdma0_pdata.nr_valid_peri = + ARRAY_SIZE(exynos4210_pdma0_peri); + exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri; + exynos4_pdma1_pdata.nr_valid_peri = + ARRAY_SIZE(exynos4210_pdma1_peri); + exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri; + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { + exynos4_pdma0_pdata.nr_valid_peri = + ARRAY_SIZE(exynos4212_pdma0_peri); + exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri; + exynos4_pdma1_pdata.nr_valid_peri = + ARRAY_SIZE(exynos4212_pdma1_peri); + exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri; + } + dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask); - amba_device_register(&exynos4_device_pdma0, &iomem_resource); + amba_device_register(&exynos4_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask); - amba_device_register(&exynos4_device_pdma1, &iomem_resource); + amba_device_register(&exynos4_pdma1_device, &iomem_resource); + + dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask); + amba_device_register(&exynos4_mdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index dd1ad55524c9..9c17a0a43858 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_plat.h> #include <mach/regs-pmu.h> diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/arch/arm/mach-exynos/include/mach/cpufreq.h index 3df27f2d5034..7517c3f417af 100644 --- a/arch/arm/mach-exynos/include/mach/cpufreq.h +++ b/arch/arm/mach-exynos/include/mach/cpufreq.h @@ -32,3 +32,5 @@ struct exynos_dvfs_info { }; extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *); +extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *); +extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *); diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S index 6cacf16a67a6..6c857ff0b5d8 100644 --- a/arch/arm/mach-exynos/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S @@ -21,8 +21,13 @@ */ .macro addruart, rp, rv, tmp - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART + mov \rp, #0x10000000 + ldr \rp, [\rp, #0x0] + and \rp, \rp, #0xf00000 + teq \rp, #0x500000 @@ EXYNOS5 + ldreq \rp, =EXYNOS5_PA_UART + movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4 + ldr \rv, =S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S deleted file mode 100644 index 3ba4f547534b..000000000000 --- a/arch/arm/mach-exynos/include/mach/entry-macro.S +++ /dev/null @@ -1,16 +0,0 @@ -/* arch/arm/mach-exynos4/include/mach/entry-macro.S - * - * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for EXYNOS4 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-exynos/include/mach/exynos4-clock.h b/arch/arm/mach-exynos/include/mach/exynos4-clock.h deleted file mode 100644 index a07fcbf55251..000000000000 --- a/arch/arm/mach-exynos/include/mach/exynos4-clock.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for exynos4 clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H __FILE__ - -#include <linux/clk.h> - -extern struct clk clk_sclk_hdmi27m; -extern struct clk clk_sclk_usbphy0; -extern struct clk clk_sclk_usbphy1; -extern struct clk clk_sclk_hdmiphy; - -extern struct clksrc_clk clk_sclk_apll; -extern struct clksrc_clk clk_mout_mpll; -extern struct clksrc_clk clk_aclk_133; -extern struct clksrc_clk clk_mout_epll; -extern struct clksrc_clk clk_sclk_vpll; - -extern struct clk *clkset_corebus_list[]; -extern struct clksrc_sources clkset_mout_corebus; - -extern struct clk *clkset_aclk_top_list[]; -extern struct clksrc_sources clkset_aclk; - -extern struct clk *clkset_group_list[]; -extern struct clksrc_sources clkset_group; - -extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); - -#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h index 80523ca9bb49..d7498afe036a 100644 --- a/arch/arm/mach-exynos/include/mach/gpio.h +++ b/arch/arm/mach-exynos/include/mach/gpio.h @@ -1,9 +1,8 @@ -/* linux/arch/arm/mach-exynos4/include/mach/gpio.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * EXYNOS4 - GPIO lib support + * EXYNOS - GPIO lib support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,9 +12,13 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -/* Practically, GPIO banks up to GPZ are the configurable gpio banks */ +/* Macro for EXYNOS GPIO numbering */ + +#define EXYNOS_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +/* EXYNOS4 GPIO bank sizes */ -/* GPIO bank sizes */ #define EXYNOS4_GPIO_A0_NR (8) #define EXYNOS4_GPIO_A1_NR (6) #define EXYNOS4_GPIO_B_NR (8) @@ -54,52 +57,50 @@ #define EXYNOS4_GPIO_Y6_NR (8) #define EXYNOS4_GPIO_Z_NR (7) -/* GPIO bank numbers */ - -#define EXYNOS4_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) +/* EXYNOS4 GPIO bank numbers */ -enum s5p_gpio_number { +enum exynos4_gpio_number { EXYNOS4_GPIO_A0_START = 0, - EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0), - EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1), - EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B), - EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0), - EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1), - EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0), - EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1), - EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0), - EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1), - EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2), - EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3), - EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4), - EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0), - EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1), - EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2), - EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3), - EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0), - EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1), - EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0), - EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1), - EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2), - EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3), - EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0), - EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1), - EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2), - EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0), - EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1), - EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2), - EXYNOS4_GPIO_Y0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3), - EXYNOS4_GPIO_Y1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0), - EXYNOS4_GPIO_Y2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1), - EXYNOS4_GPIO_Y3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2), - EXYNOS4_GPIO_Y4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3), - EXYNOS4_GPIO_Y5_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4), - EXYNOS4_GPIO_Y6_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5), - EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6), + EXYNOS4_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A0), + EXYNOS4_GPIO_B_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A1), + EXYNOS4_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_B), + EXYNOS4_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0), + EXYNOS4_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1), + EXYNOS4_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0), + EXYNOS4_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1), + EXYNOS4_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0), + EXYNOS4_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1), + EXYNOS4_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2), + EXYNOS4_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3), + EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4), + EXYNOS4_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0), + EXYNOS4_GPIO_F2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1), + EXYNOS4_GPIO_F3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2), + EXYNOS4_GPIO_J0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F3), + EXYNOS4_GPIO_J1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J0), + EXYNOS4_GPIO_K0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J1), + EXYNOS4_GPIO_K1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K0), + EXYNOS4_GPIO_K2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K1), + EXYNOS4_GPIO_K3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K2), + EXYNOS4_GPIO_L0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K3), + EXYNOS4_GPIO_L1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L0), + EXYNOS4_GPIO_L2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L1), + EXYNOS4_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L2), + EXYNOS4_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X0), + EXYNOS4_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X1), + EXYNOS4_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X2), + EXYNOS4_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X3), + EXYNOS4_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y0), + EXYNOS4_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y1), + EXYNOS4_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y2), + EXYNOS4_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y3), + EXYNOS4_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y4), + EXYNOS4_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y5), + EXYNOS4_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6), }; /* EXYNOS4 GPIO number definitions */ + #define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr)) #define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr)) #define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr)) @@ -139,11 +140,147 @@ enum s5p_gpio_number { #define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr)) /* the end of the EXYNOS4 specific gpios */ + #define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1) -#define S3C_GPIO_END EXYNOS4_GPIO_END -/* define the number of gpios we need to the one after the GPZ() range */ -#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) +/* EXYNOS5 GPIO bank sizes */ + +#define EXYNOS5_GPIO_A0_NR (8) +#define EXYNOS5_GPIO_A1_NR (6) +#define EXYNOS5_GPIO_A2_NR (8) +#define EXYNOS5_GPIO_B0_NR (5) +#define EXYNOS5_GPIO_B1_NR (5) +#define EXYNOS5_GPIO_B2_NR (4) +#define EXYNOS5_GPIO_B3_NR (4) +#define EXYNOS5_GPIO_C0_NR (7) +#define EXYNOS5_GPIO_C1_NR (7) +#define EXYNOS5_GPIO_C2_NR (7) +#define EXYNOS5_GPIO_C3_NR (7) +#define EXYNOS5_GPIO_D0_NR (8) +#define EXYNOS5_GPIO_D1_NR (8) +#define EXYNOS5_GPIO_Y0_NR (6) +#define EXYNOS5_GPIO_Y1_NR (4) +#define EXYNOS5_GPIO_Y2_NR (6) +#define EXYNOS5_GPIO_Y3_NR (8) +#define EXYNOS5_GPIO_Y4_NR (8) +#define EXYNOS5_GPIO_Y5_NR (8) +#define EXYNOS5_GPIO_Y6_NR (8) +#define EXYNOS5_GPIO_X0_NR (8) +#define EXYNOS5_GPIO_X1_NR (8) +#define EXYNOS5_GPIO_X2_NR (8) +#define EXYNOS5_GPIO_X3_NR (8) +#define EXYNOS5_GPIO_E0_NR (8) +#define EXYNOS5_GPIO_E1_NR (2) +#define EXYNOS5_GPIO_F0_NR (4) +#define EXYNOS5_GPIO_F1_NR (4) +#define EXYNOS5_GPIO_G0_NR (8) +#define EXYNOS5_GPIO_G1_NR (8) +#define EXYNOS5_GPIO_G2_NR (2) +#define EXYNOS5_GPIO_H0_NR (4) +#define EXYNOS5_GPIO_H1_NR (8) +#define EXYNOS5_GPIO_V0_NR (8) +#define EXYNOS5_GPIO_V1_NR (8) +#define EXYNOS5_GPIO_V2_NR (8) +#define EXYNOS5_GPIO_V3_NR (8) +#define EXYNOS5_GPIO_V4_NR (2) +#define EXYNOS5_GPIO_Z_NR (7) + +/* EXYNOS5 GPIO bank numbers */ + +enum exynos5_gpio_number { + EXYNOS5_GPIO_A0_START = 0, + EXYNOS5_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A0), + EXYNOS5_GPIO_A2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A1), + EXYNOS5_GPIO_B0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A2), + EXYNOS5_GPIO_B1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B0), + EXYNOS5_GPIO_B2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B1), + EXYNOS5_GPIO_B3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B2), + EXYNOS5_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B3), + EXYNOS5_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0), + EXYNOS5_GPIO_C2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1), + EXYNOS5_GPIO_C3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2), + EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3), + EXYNOS5_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0), + EXYNOS5_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1), + EXYNOS5_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0), + EXYNOS5_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y1), + EXYNOS5_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y2), + EXYNOS5_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y3), + EXYNOS5_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y4), + EXYNOS5_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y5), + EXYNOS5_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y6), + EXYNOS5_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X0), + EXYNOS5_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X1), + EXYNOS5_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X2), + EXYNOS5_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X3), + EXYNOS5_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E0), + EXYNOS5_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E1), + EXYNOS5_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F0), + EXYNOS5_GPIO_G0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F1), + EXYNOS5_GPIO_G1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G0), + EXYNOS5_GPIO_G2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G1), + EXYNOS5_GPIO_H0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G2), + EXYNOS5_GPIO_H1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H0), + EXYNOS5_GPIO_V0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H1), + EXYNOS5_GPIO_V1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V0), + EXYNOS5_GPIO_V2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V1), + EXYNOS5_GPIO_V3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V2), + EXYNOS5_GPIO_V4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V3), + EXYNOS5_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V4), +}; + +/* EXYNOS5 GPIO number definitions */ + +#define EXYNOS5_GPA0(_nr) (EXYNOS5_GPIO_A0_START + (_nr)) +#define EXYNOS5_GPA1(_nr) (EXYNOS5_GPIO_A1_START + (_nr)) +#define EXYNOS5_GPA2(_nr) (EXYNOS5_GPIO_A2_START + (_nr)) +#define EXYNOS5_GPB0(_nr) (EXYNOS5_GPIO_B0_START + (_nr)) +#define EXYNOS5_GPB1(_nr) (EXYNOS5_GPIO_B1_START + (_nr)) +#define EXYNOS5_GPB2(_nr) (EXYNOS5_GPIO_B2_START + (_nr)) +#define EXYNOS5_GPB3(_nr) (EXYNOS5_GPIO_B3_START + (_nr)) +#define EXYNOS5_GPC0(_nr) (EXYNOS5_GPIO_C0_START + (_nr)) +#define EXYNOS5_GPC1(_nr) (EXYNOS5_GPIO_C1_START + (_nr)) +#define EXYNOS5_GPC2(_nr) (EXYNOS5_GPIO_C2_START + (_nr)) +#define EXYNOS5_GPC3(_nr) (EXYNOS5_GPIO_C3_START + (_nr)) +#define EXYNOS5_GPD0(_nr) (EXYNOS5_GPIO_D0_START + (_nr)) +#define EXYNOS5_GPD1(_nr) (EXYNOS5_GPIO_D1_START + (_nr)) +#define EXYNOS5_GPY0(_nr) (EXYNOS5_GPIO_Y0_START + (_nr)) +#define EXYNOS5_GPY1(_nr) (EXYNOS5_GPIO_Y1_START + (_nr)) +#define EXYNOS5_GPY2(_nr) (EXYNOS5_GPIO_Y2_START + (_nr)) +#define EXYNOS5_GPY3(_nr) (EXYNOS5_GPIO_Y3_START + (_nr)) +#define EXYNOS5_GPY4(_nr) (EXYNOS5_GPIO_Y4_START + (_nr)) +#define EXYNOS5_GPY5(_nr) (EXYNOS5_GPIO_Y5_START + (_nr)) +#define EXYNOS5_GPY6(_nr) (EXYNOS5_GPIO_Y6_START + (_nr)) +#define EXYNOS5_GPX0(_nr) (EXYNOS5_GPIO_X0_START + (_nr)) +#define EXYNOS5_GPX1(_nr) (EXYNOS5_GPIO_X1_START + (_nr)) +#define EXYNOS5_GPX2(_nr) (EXYNOS5_GPIO_X2_START + (_nr)) +#define EXYNOS5_GPX3(_nr) (EXYNOS5_GPIO_X3_START + (_nr)) +#define EXYNOS5_GPE0(_nr) (EXYNOS5_GPIO_E0_START + (_nr)) +#define EXYNOS5_GPE1(_nr) (EXYNOS5_GPIO_E1_START + (_nr)) +#define EXYNOS5_GPF0(_nr) (EXYNOS5_GPIO_F0_START + (_nr)) +#define EXYNOS5_GPF1(_nr) (EXYNOS5_GPIO_F1_START + (_nr)) +#define EXYNOS5_GPG0(_nr) (EXYNOS5_GPIO_G0_START + (_nr)) +#define EXYNOS5_GPG1(_nr) (EXYNOS5_GPIO_G1_START + (_nr)) +#define EXYNOS5_GPG2(_nr) (EXYNOS5_GPIO_G2_START + (_nr)) +#define EXYNOS5_GPH0(_nr) (EXYNOS5_GPIO_H0_START + (_nr)) +#define EXYNOS5_GPH1(_nr) (EXYNOS5_GPIO_H1_START + (_nr)) +#define EXYNOS5_GPV0(_nr) (EXYNOS5_GPIO_V0_START + (_nr)) +#define EXYNOS5_GPV1(_nr) (EXYNOS5_GPIO_V1_START + (_nr)) +#define EXYNOS5_GPV2(_nr) (EXYNOS5_GPIO_V2_START + (_nr)) +#define EXYNOS5_GPV3(_nr) (EXYNOS5_GPIO_V3_START + (_nr)) +#define EXYNOS5_GPV4(_nr) (EXYNOS5_GPIO_V4_START + (_nr)) +#define EXYNOS5_GPZ(_nr) (EXYNOS5_GPIO_Z_START + (_nr)) + +/* the end of the EXYNOS5 specific gpios */ + +#define EXYNOS5_GPIO_END (EXYNOS5_GPZ(EXYNOS5_GPIO_Z_NR) + 1) + +/* actually, EXYNOS5_GPIO_END is bigger than EXYNOS4 */ + +#define S3C_GPIO_END (EXYNOS5_GPIO_END) + +/* define the number of gpios */ + +#define ARCH_NR_GPIOS (CONFIG_SAMSUNG_GPIO_EXTRA + S3C_GPIO_END) #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index f77bce04789a..9bee8535d9e0 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -1,9 +1,8 @@ -/* linux/arch/arm/mach-exynos4/include/mach/irqs.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * EXYNOS4 - IRQ definitions + * EXYNOS - IRQ definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,158 +16,450 @@ /* PPI: Private Peripheral Interrupt */ -#define IRQ_PPI(x) (x+16) - -#define IRQ_MCT_LOCALTIMER IRQ_PPI(12) +#define IRQ_PPI(x) (x + 16) /* SPI: Shared Peripheral Interrupt */ -#define IRQ_SPI(x) (x+32) - -#define IRQ_EINT0 IRQ_SPI(16) -#define IRQ_EINT1 IRQ_SPI(17) -#define IRQ_EINT2 IRQ_SPI(18) -#define IRQ_EINT3 IRQ_SPI(19) -#define IRQ_EINT4 IRQ_SPI(20) -#define IRQ_EINT5 IRQ_SPI(21) -#define IRQ_EINT6 IRQ_SPI(22) -#define IRQ_EINT7 IRQ_SPI(23) -#define IRQ_EINT8 IRQ_SPI(24) -#define IRQ_EINT9 IRQ_SPI(25) -#define IRQ_EINT10 IRQ_SPI(26) -#define IRQ_EINT11 IRQ_SPI(27) -#define IRQ_EINT12 IRQ_SPI(28) -#define IRQ_EINT13 IRQ_SPI(29) -#define IRQ_EINT14 IRQ_SPI(30) -#define IRQ_EINT15 IRQ_SPI(31) -#define IRQ_EINT16_31 IRQ_SPI(32) - -#define IRQ_PDMA0 IRQ_SPI(35) -#define IRQ_PDMA1 IRQ_SPI(36) -#define IRQ_TIMER0_VIC IRQ_SPI(37) -#define IRQ_TIMER1_VIC IRQ_SPI(38) -#define IRQ_TIMER2_VIC IRQ_SPI(39) -#define IRQ_TIMER3_VIC IRQ_SPI(40) -#define IRQ_TIMER4_VIC IRQ_SPI(41) -#define IRQ_MCT_L0 IRQ_SPI(42) -#define IRQ_WDT IRQ_SPI(43) -#define IRQ_RTC_ALARM IRQ_SPI(44) -#define IRQ_RTC_TIC IRQ_SPI(45) -#define IRQ_GPIO_XB IRQ_SPI(46) -#define IRQ_GPIO_XA IRQ_SPI(47) -#define IRQ_MCT_L1 IRQ_SPI(48) - -#define IRQ_UART0 IRQ_SPI(52) -#define IRQ_UART1 IRQ_SPI(53) -#define IRQ_UART2 IRQ_SPI(54) -#define IRQ_UART3 IRQ_SPI(55) -#define IRQ_UART4 IRQ_SPI(56) -#define IRQ_MCT_G0 IRQ_SPI(57) -#define IRQ_IIC IRQ_SPI(58) -#define IRQ_IIC1 IRQ_SPI(59) -#define IRQ_IIC2 IRQ_SPI(60) -#define IRQ_IIC3 IRQ_SPI(61) -#define IRQ_IIC4 IRQ_SPI(62) -#define IRQ_IIC5 IRQ_SPI(63) -#define IRQ_IIC6 IRQ_SPI(64) -#define IRQ_IIC7 IRQ_SPI(65) -#define IRQ_SPI0 IRQ_SPI(66) -#define IRQ_SPI1 IRQ_SPI(67) -#define IRQ_SPI2 IRQ_SPI(68) - -#define IRQ_USB_HOST IRQ_SPI(70) -#define IRQ_USB_HSOTG IRQ_SPI(71) -#define IRQ_MODEM_IF IRQ_SPI(72) -#define IRQ_HSMMC0 IRQ_SPI(73) -#define IRQ_HSMMC1 IRQ_SPI(74) -#define IRQ_HSMMC2 IRQ_SPI(75) -#define IRQ_HSMMC3 IRQ_SPI(76) -#define IRQ_DWMCI IRQ_SPI(77) - -#define IRQ_MIPI_CSIS0 IRQ_SPI(78) -#define IRQ_MIPI_CSIS1 IRQ_SPI(80) - -#define IRQ_ONENAND_AUDI IRQ_SPI(82) -#define IRQ_ROTATOR IRQ_SPI(83) -#define IRQ_FIMC0 IRQ_SPI(84) -#define IRQ_FIMC1 IRQ_SPI(85) -#define IRQ_FIMC2 IRQ_SPI(86) -#define IRQ_FIMC3 IRQ_SPI(87) -#define IRQ_JPEG IRQ_SPI(88) -#define IRQ_2D IRQ_SPI(89) -#define IRQ_PCIE IRQ_SPI(90) - -#define IRQ_MIXER IRQ_SPI(91) -#define IRQ_HDMI IRQ_SPI(92) -#define IRQ_IIC_HDMIPHY IRQ_SPI(93) -#define IRQ_MFC IRQ_SPI(94) -#define IRQ_SDO IRQ_SPI(95) - -#define IRQ_AUDIO_SS IRQ_SPI(96) -#define IRQ_I2S0 IRQ_SPI(97) -#define IRQ_I2S1 IRQ_SPI(98) -#define IRQ_I2S2 IRQ_SPI(99) -#define IRQ_AC97 IRQ_SPI(100) - -#define IRQ_SPDIF IRQ_SPI(104) -#define IRQ_ADC0 IRQ_SPI(105) -#define IRQ_PEN0 IRQ_SPI(106) -#define IRQ_ADC1 IRQ_SPI(107) -#define IRQ_PEN1 IRQ_SPI(108) -#define IRQ_KEYPAD IRQ_SPI(109) -#define IRQ_PMU IRQ_SPI(110) -#define IRQ_GPS IRQ_SPI(111) -#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) -#define IRQ_SLIMBUS IRQ_SPI(113) - -#define IRQ_TSI IRQ_SPI(115) -#define IRQ_SATA IRQ_SPI(116) - -#define MAX_IRQ_IN_COMBINER 8 -#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128)) -#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) - -#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) -#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) -#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) -#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3) -#define IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4) -#define IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5) -#define IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6) -#define IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7) - -#define IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0) -#define IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1) -#define IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2) -#define IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3) -#define IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4) -#define IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5) -#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) -#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) - -#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0) -#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) -#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) - -#define MAX_COMBINER_NR 16 - -#define IRQ_ADC IRQ_ADC0 -#define IRQ_TC IRQ_PEN0 - -#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) - -#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0) -#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16) - -/* optional GPIO interrupts */ -#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32) -#define IRQ_GPIO1_NR_GROUPS 16 -#define IRQ_GPIO2_NR_GROUPS 9 -#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) - -#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) +#define IRQ_SPI(x) (x + 32) + +/* COMBINER */ + +#define MAX_IRQ_IN_COMBINER 8 +#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128)) +#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) + +/* For EXYNOS4 and EXYNOS5 */ + +#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12) + +#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32) + +/* For EXYNOS4 SoCs */ + +#define EXYNOS4_IRQ_EINT0 IRQ_SPI(16) +#define EXYNOS4_IRQ_EINT1 IRQ_SPI(17) +#define EXYNOS4_IRQ_EINT2 IRQ_SPI(18) +#define EXYNOS4_IRQ_EINT3 IRQ_SPI(19) +#define EXYNOS4_IRQ_EINT4 IRQ_SPI(20) +#define EXYNOS4_IRQ_EINT5 IRQ_SPI(21) +#define EXYNOS4_IRQ_EINT6 IRQ_SPI(22) +#define EXYNOS4_IRQ_EINT7 IRQ_SPI(23) +#define EXYNOS4_IRQ_EINT8 IRQ_SPI(24) +#define EXYNOS4_IRQ_EINT9 IRQ_SPI(25) +#define EXYNOS4_IRQ_EINT10 IRQ_SPI(26) +#define EXYNOS4_IRQ_EINT11 IRQ_SPI(27) +#define EXYNOS4_IRQ_EINT12 IRQ_SPI(28) +#define EXYNOS4_IRQ_EINT13 IRQ_SPI(29) +#define EXYNOS4_IRQ_EINT14 IRQ_SPI(30) +#define EXYNOS4_IRQ_EINT15 IRQ_SPI(31) + +#define EXYNOS4_IRQ_MDMA0 IRQ_SPI(33) +#define EXYNOS4_IRQ_MDMA1 IRQ_SPI(34) +#define EXYNOS4_IRQ_PDMA0 IRQ_SPI(35) +#define EXYNOS4_IRQ_PDMA1 IRQ_SPI(36) +#define EXYNOS4_IRQ_TIMER0_VIC IRQ_SPI(37) +#define EXYNOS4_IRQ_TIMER1_VIC IRQ_SPI(38) +#define EXYNOS4_IRQ_TIMER2_VIC IRQ_SPI(39) +#define EXYNOS4_IRQ_TIMER3_VIC IRQ_SPI(40) +#define EXYNOS4_IRQ_TIMER4_VIC IRQ_SPI(41) +#define EXYNOS4_IRQ_MCT_L0 IRQ_SPI(42) +#define EXYNOS4_IRQ_WDT IRQ_SPI(43) +#define EXYNOS4_IRQ_RTC_ALARM IRQ_SPI(44) +#define EXYNOS4_IRQ_RTC_TIC IRQ_SPI(45) +#define EXYNOS4_IRQ_GPIO_XB IRQ_SPI(46) +#define EXYNOS4_IRQ_GPIO_XA IRQ_SPI(47) +#define EXYNOS4_IRQ_MCT_L1 IRQ_SPI(48) + +#define EXYNOS4_IRQ_UART0 IRQ_SPI(52) +#define EXYNOS4_IRQ_UART1 IRQ_SPI(53) +#define EXYNOS4_IRQ_UART2 IRQ_SPI(54) +#define EXYNOS4_IRQ_UART3 IRQ_SPI(55) +#define EXYNOS4_IRQ_UART4 IRQ_SPI(56) +#define EXYNOS4_IRQ_MCT_G0 IRQ_SPI(57) +#define EXYNOS4_IRQ_IIC IRQ_SPI(58) +#define EXYNOS4_IRQ_IIC1 IRQ_SPI(59) +#define EXYNOS4_IRQ_IIC2 IRQ_SPI(60) +#define EXYNOS4_IRQ_IIC3 IRQ_SPI(61) +#define EXYNOS4_IRQ_IIC4 IRQ_SPI(62) +#define EXYNOS4_IRQ_IIC5 IRQ_SPI(63) +#define EXYNOS4_IRQ_IIC6 IRQ_SPI(64) +#define EXYNOS4_IRQ_IIC7 IRQ_SPI(65) +#define EXYNOS4_IRQ_SPI0 IRQ_SPI(66) +#define EXYNOS4_IRQ_SPI1 IRQ_SPI(67) +#define EXYNOS4_IRQ_SPI2 IRQ_SPI(68) + +#define EXYNOS4_IRQ_USB_HOST IRQ_SPI(70) +#define EXYNOS4_IRQ_USB_HSOTG IRQ_SPI(71) +#define EXYNOS4_IRQ_MODEM_IF IRQ_SPI(72) +#define EXYNOS4_IRQ_HSMMC0 IRQ_SPI(73) +#define EXYNOS4_IRQ_HSMMC1 IRQ_SPI(74) +#define EXYNOS4_IRQ_HSMMC2 IRQ_SPI(75) +#define EXYNOS4_IRQ_HSMMC3 IRQ_SPI(76) +#define EXYNOS4_IRQ_DWMCI IRQ_SPI(77) + +#define EXYNOS4_IRQ_MIPI_CSIS0 IRQ_SPI(78) +#define EXYNOS4_IRQ_MIPI_CSIS1 IRQ_SPI(80) + +#define EXYNOS4_IRQ_ONENAND_AUDI IRQ_SPI(82) +#define EXYNOS4_IRQ_ROTATOR IRQ_SPI(83) +#define EXYNOS4_IRQ_FIMC0 IRQ_SPI(84) +#define EXYNOS4_IRQ_FIMC1 IRQ_SPI(85) +#define EXYNOS4_IRQ_FIMC2 IRQ_SPI(86) +#define EXYNOS4_IRQ_FIMC3 IRQ_SPI(87) +#define EXYNOS4_IRQ_JPEG IRQ_SPI(88) +#define EXYNOS4_IRQ_2D IRQ_SPI(89) +#define EXYNOS4_IRQ_PCIE IRQ_SPI(90) + +#define EXYNOS4_IRQ_MIXER IRQ_SPI(91) +#define EXYNOS4_IRQ_HDMI IRQ_SPI(92) +#define EXYNOS4_IRQ_IIC_HDMIPHY IRQ_SPI(93) +#define EXYNOS4_IRQ_MFC IRQ_SPI(94) +#define EXYNOS4_IRQ_SDO IRQ_SPI(95) + +#define EXYNOS4_IRQ_AUDIO_SS IRQ_SPI(96) +#define EXYNOS4_IRQ_I2S0 IRQ_SPI(97) +#define EXYNOS4_IRQ_I2S1 IRQ_SPI(98) +#define EXYNOS4_IRQ_I2S2 IRQ_SPI(99) +#define EXYNOS4_IRQ_AC97 IRQ_SPI(100) + +#define EXYNOS4_IRQ_SPDIF IRQ_SPI(104) +#define EXYNOS4_IRQ_ADC0 IRQ_SPI(105) +#define EXYNOS4_IRQ_PEN0 IRQ_SPI(106) +#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107) +#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108) +#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109) +#define EXYNOS4_IRQ_PMU IRQ_SPI(110) +#define EXYNOS4_IRQ_GPS IRQ_SPI(111) +#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) +#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113) + +#define EXYNOS4_IRQ_TSI IRQ_SPI(115) +#define EXYNOS4_IRQ_SATA IRQ_SPI(116) + +#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) +#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) +#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) +#define EXYNOS4_IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3) +#define EXYNOS4_IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4) +#define EXYNOS4_IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5) +#define EXYNOS4_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6) +#define EXYNOS4_IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7) + +#define EXYNOS4_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0) +#define EXYNOS4_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1) +#define EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2) +#define EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3) +#define EXYNOS4_IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4) +#define EXYNOS4_IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5) +#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) +#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) + +#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0) +#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) +#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) + +#define EXYNOS4_MAX_COMBINER_NR 16 + +#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16 +#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9 + +/* + * For Compatibility: + * the default is for EXYNOS4, and + * for exynos5, should be re-mapped at function + */ + +#define IRQ_TIMER0_VIC EXYNOS4_IRQ_TIMER0_VIC +#define IRQ_TIMER1_VIC EXYNOS4_IRQ_TIMER1_VIC +#define IRQ_TIMER2_VIC EXYNOS4_IRQ_TIMER2_VIC +#define IRQ_TIMER3_VIC EXYNOS4_IRQ_TIMER3_VIC +#define IRQ_TIMER4_VIC EXYNOS4_IRQ_TIMER4_VIC + +#define IRQ_WDT EXYNOS4_IRQ_WDT +#define IRQ_RTC_ALARM EXYNOS4_IRQ_RTC_ALARM +#define IRQ_RTC_TIC EXYNOS4_IRQ_RTC_TIC +#define IRQ_GPIO_XB EXYNOS4_IRQ_GPIO_XB +#define IRQ_GPIO_XA EXYNOS4_IRQ_GPIO_XA + +#define IRQ_IIC EXYNOS4_IRQ_IIC +#define IRQ_IIC1 EXYNOS4_IRQ_IIC1 +#define IRQ_IIC3 EXYNOS4_IRQ_IIC3 +#define IRQ_IIC5 EXYNOS4_IRQ_IIC5 +#define IRQ_IIC6 EXYNOS4_IRQ_IIC6 +#define IRQ_IIC7 EXYNOS4_IRQ_IIC7 + +#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST + +#define IRQ_HSMMC0 EXYNOS4_IRQ_HSMMC0 +#define IRQ_HSMMC1 EXYNOS4_IRQ_HSMMC1 +#define IRQ_HSMMC2 EXYNOS4_IRQ_HSMMC2 +#define IRQ_HSMMC3 EXYNOS4_IRQ_HSMMC3 + +#define IRQ_MIPI_CSIS0 EXYNOS4_IRQ_MIPI_CSIS0 + +#define IRQ_ONENAND_AUDI EXYNOS4_IRQ_ONENAND_AUDI + +#define IRQ_FIMC0 EXYNOS4_IRQ_FIMC0 +#define IRQ_FIMC1 EXYNOS4_IRQ_FIMC1 +#define IRQ_FIMC2 EXYNOS4_IRQ_FIMC2 +#define IRQ_FIMC3 EXYNOS4_IRQ_FIMC3 +#define IRQ_JPEG EXYNOS4_IRQ_JPEG +#define IRQ_2D EXYNOS4_IRQ_2D + +#define IRQ_MIXER EXYNOS4_IRQ_MIXER +#define IRQ_HDMI EXYNOS4_IRQ_HDMI +#define IRQ_IIC_HDMIPHY EXYNOS4_IRQ_IIC_HDMIPHY +#define IRQ_MFC EXYNOS4_IRQ_MFC +#define IRQ_SDO EXYNOS4_IRQ_SDO + +#define IRQ_ADC EXYNOS4_IRQ_ADC0 +#define IRQ_TC EXYNOS4_IRQ_PEN0 + +#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD +#define IRQ_PMU EXYNOS4_IRQ_PMU + +#define IRQ_SYSMMU_MDMA0_0 EXYNOS4_IRQ_SYSMMU_MDMA0_0 +#define IRQ_SYSMMU_SSS_0 EXYNOS4_IRQ_SYSMMU_SSS_0 +#define IRQ_SYSMMU_FIMC0_0 EXYNOS4_IRQ_SYSMMU_FIMC0_0 +#define IRQ_SYSMMU_FIMC1_0 EXYNOS4_IRQ_SYSMMU_FIMC1_0 +#define IRQ_SYSMMU_FIMC2_0 EXYNOS4_IRQ_SYSMMU_FIMC2_0 +#define IRQ_SYSMMU_FIMC3_0 EXYNOS4_IRQ_SYSMMU_FIMC3_0 +#define IRQ_SYSMMU_JPEG_0 EXYNOS4_IRQ_SYSMMU_JPEG_0 +#define IRQ_SYSMMU_2D_0 EXYNOS4_IRQ_SYSMMU_2D_0 + +#define IRQ_SYSMMU_ROTATOR_0 EXYNOS4_IRQ_SYSMMU_ROTATOR_0 +#define IRQ_SYSMMU_MDMA1_0 EXYNOS4_IRQ_SYSMMU_MDMA1_0 +#define IRQ_SYSMMU_LCD0_M0_0 EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 +#define IRQ_SYSMMU_LCD1_M1_0 EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 +#define IRQ_SYSMMU_TV_M0_0 EXYNOS4_IRQ_SYSMMU_TV_M0_0 +#define IRQ_SYSMMU_MFC_M0_0 EXYNOS4_IRQ_SYSMMU_MFC_M0_0 +#define IRQ_SYSMMU_MFC_M1_0 EXYNOS4_IRQ_SYSMMU_MFC_M1_0 +#define IRQ_SYSMMU_PCIE_0 EXYNOS4_IRQ_SYSMMU_PCIE_0 + +#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO +#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC +#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM + +#define IRQ_GPIO1_NR_GROUPS EXYNOS4_IRQ_GPIO1_NR_GROUPS +#define IRQ_GPIO2_NR_GROUPS EXYNOS4_IRQ_GPIO2_NR_GROUPS + +/* For EXYNOS5 SoCs */ + +#define EXYNOS5_IRQ_MDMA0 IRQ_SPI(33) +#define EXYNOS5_IRQ_PDMA0 IRQ_SPI(34) +#define EXYNOS5_IRQ_PDMA1 IRQ_SPI(35) +#define EXYNOS5_IRQ_TIMER0_VIC IRQ_SPI(36) +#define EXYNOS5_IRQ_TIMER1_VIC IRQ_SPI(37) +#define EXYNOS5_IRQ_TIMER2_VIC IRQ_SPI(38) +#define EXYNOS5_IRQ_TIMER3_VIC IRQ_SPI(39) +#define EXYNOS5_IRQ_TIMER4_VIC IRQ_SPI(40) +#define EXYNOS5_IRQ_RTIC IRQ_SPI(41) +#define EXYNOS5_IRQ_WDT IRQ_SPI(42) +#define EXYNOS5_IRQ_RTC_ALARM IRQ_SPI(43) +#define EXYNOS5_IRQ_RTC_TIC IRQ_SPI(44) +#define EXYNOS5_IRQ_GPIO_XB IRQ_SPI(45) +#define EXYNOS5_IRQ_GPIO_XA IRQ_SPI(46) +#define EXYNOS5_IRQ_GPIO IRQ_SPI(47) +#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48) +#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49) +#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50) +#define EXYNOS5_IRQ_UART0 IRQ_SPI(51) +#define EXYNOS5_IRQ_UART1 IRQ_SPI(52) +#define EXYNOS5_IRQ_UART2 IRQ_SPI(53) +#define EXYNOS5_IRQ_UART3 IRQ_SPI(54) +#define EXYNOS5_IRQ_UART4 IRQ_SPI(55) +#define EXYNOS5_IRQ_IIC IRQ_SPI(56) +#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57) +#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58) +#define EXYNOS5_IRQ_IIC3 IRQ_SPI(59) +#define EXYNOS5_IRQ_IIC4 IRQ_SPI(60) +#define EXYNOS5_IRQ_IIC5 IRQ_SPI(61) +#define EXYNOS5_IRQ_IIC6 IRQ_SPI(62) +#define EXYNOS5_IRQ_IIC7 IRQ_SPI(63) +#define EXYNOS5_IRQ_IIC_HDMIPHY IRQ_SPI(64) +#define EXYNOS5_IRQ_TMU IRQ_SPI(65) +#define EXYNOS5_IRQ_FIQ_0 IRQ_SPI(66) +#define EXYNOS5_IRQ_FIQ_1 IRQ_SPI(67) +#define EXYNOS5_IRQ_SPI0 IRQ_SPI(68) +#define EXYNOS5_IRQ_SPI1 IRQ_SPI(69) +#define EXYNOS5_IRQ_SPI2 IRQ_SPI(70) +#define EXYNOS5_IRQ_USB_HOST IRQ_SPI(71) +#define EXYNOS5_IRQ_USB3_DRD IRQ_SPI(72) +#define EXYNOS5_IRQ_MIPI_HSI IRQ_SPI(73) +#define EXYNOS5_IRQ_USB_HSOTG IRQ_SPI(74) +#define EXYNOS5_IRQ_HSMMC0 IRQ_SPI(75) +#define EXYNOS5_IRQ_HSMMC1 IRQ_SPI(76) +#define EXYNOS5_IRQ_HSMMC2 IRQ_SPI(77) +#define EXYNOS5_IRQ_HSMMC3 IRQ_SPI(78) +#define EXYNOS5_IRQ_MIPICSI0 IRQ_SPI(79) +#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80) +#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81) +#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82) +#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84) +#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85) +#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86) +#define EXYNOS5_IRQ_GSC2 IRQ_SPI(87) +#define EXYNOS5_IRQ_GSC3 IRQ_SPI(88) +#define EXYNOS5_IRQ_JPEG IRQ_SPI(89) +#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90) +#define EXYNOS5_IRQ_2D IRQ_SPI(91) +#define EXYNOS5_IRQ_SFMC0 IRQ_SPI(92) +#define EXYNOS5_IRQ_SFMC1 IRQ_SPI(93) +#define EXYNOS5_IRQ_MIXER IRQ_SPI(94) +#define EXYNOS5_IRQ_HDMI IRQ_SPI(95) +#define EXYNOS5_IRQ_MFC IRQ_SPI(96) +#define EXYNOS5_IRQ_AUDIO_SS IRQ_SPI(97) +#define EXYNOS5_IRQ_I2S0 IRQ_SPI(98) +#define EXYNOS5_IRQ_I2S1 IRQ_SPI(99) +#define EXYNOS5_IRQ_I2S2 IRQ_SPI(100) +#define EXYNOS5_IRQ_AC97 IRQ_SPI(101) +#define EXYNOS5_IRQ_PCM0 IRQ_SPI(102) +#define EXYNOS5_IRQ_PCM1 IRQ_SPI(103) +#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104) +#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105) +#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106) + +#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108) +#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109) +#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110) +#define EXYNOS5_IRQ_EAGLE_PMU IRQ_SPI(111) +#define EXYNOS5_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) +#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113) +#define EXYNOS5_IRQ_CEC IRQ_SPI(114) +#define EXYNOS5_IRQ_SATA IRQ_SPI(115) +#define EXYNOS5_IRQ_NFCON IRQ_SPI(116) + +#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123) +#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124) +#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125) +#define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126) +#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127) + +#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2) +#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(1, 6) + +#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0) +#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1) +#define EXYNOS5_IRQ_SYSMMU_GSC1_0 COMBINER_IRQ(2, 2) +#define EXYNOS5_IRQ_SYSMMU_GSC1_1 COMBINER_IRQ(2, 3) +#define EXYNOS5_IRQ_SYSMMU_GSC2_0 COMBINER_IRQ(2, 4) +#define EXYNOS5_IRQ_SYSMMU_GSC2_1 COMBINER_IRQ(2, 5) +#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6) +#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7) + +#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2) +#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3) +#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4) +#define EXYNOS5_IRQ_SYSMMU_LITE0_1 COMBINER_IRQ(3, 5) +#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_0 COMBINER_IRQ(3, 6) +#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_1 COMBINER_IRQ(3, 7) + +#define EXYNOS5_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(4, 0) +#define EXYNOS5_IRQ_SYSMMU_ROTATOR_1 COMBINER_IRQ(4, 1) +#define EXYNOS5_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 2) +#define EXYNOS5_IRQ_SYSMMU_JPEG_1 COMBINER_IRQ(4, 3) + +#define EXYNOS5_IRQ_SYSMMU_FD_0 COMBINER_IRQ(5, 0) +#define EXYNOS5_IRQ_SYSMMU_FD_1 COMBINER_IRQ(5, 1) +#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_0 COMBINER_IRQ(5, 2) +#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_1 COMBINER_IRQ(5, 3) +#define EXYNOS5_IRQ_SYSMMU_MCUISP_0 COMBINER_IRQ(5, 4) +#define EXYNOS5_IRQ_SYSMMU_MCUISP_1 COMBINER_IRQ(5, 5) +#define EXYNOS5_IRQ_SYSMMU_3DNR_0 COMBINER_IRQ(5, 6) +#define EXYNOS5_IRQ_SYSMMU_3DNR_1 COMBINER_IRQ(5, 7) + +#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0) +#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1) +#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(6, 2) +#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(6, 3) +#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4) +#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5) +#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6) +#define EXYNOS5_IRQ_SYSMMU_SSS_1 COMBINER_IRQ(6, 7) + +#define EXYNOS5_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(7, 0) +#define EXYNOS5_IRQ_SYSMMU_MDMA0_1 COMBINER_IRQ(7, 1) +#define EXYNOS5_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(7, 2) +#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3) +#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4) +#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5) +#define EXYNOS5_IRQ_SYSMMU_GPSX_0 COMBINER_IRQ(7, 6) +#define EXYNOS5_IRQ_SYSMMU_GPSX_1 COMBINER_IRQ(7, 7) + +#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(8, 5) +#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(8, 6) + +#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4) +#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5) + +#define EXYNOS5_IRQ_DP COMBINER_IRQ(10, 3) +#define EXYNOS5_IRQ_SYSMMU_DIS0_0 COMBINER_IRQ(10, 4) +#define EXYNOS5_IRQ_SYSMMU_DIS0_1 COMBINER_IRQ(10, 5) +#define EXYNOS5_IRQ_SYSMMU_ISP_0 COMBINER_IRQ(10, 6) +#define EXYNOS5_IRQ_SYSMMU_ISP_1 COMBINER_IRQ(10, 7) + +#define EXYNOS5_IRQ_SYSMMU_ODC_0 COMBINER_IRQ(11, 0) +#define EXYNOS5_IRQ_SYSMMU_ODC_1 COMBINER_IRQ(11, 1) +#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6) +#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7) + +#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4) +#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5) +#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6) + +#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0) +#define EXYNOS5_IRQ_MCT_L0 COMBINER_IRQ(23, 1) +#define EXYNOS5_IRQ_MCT_L1 COMBINER_IRQ(23, 2) +#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3) +#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4) +#define EXYNOS5_IRQ_MCT_G2 COMBINER_IRQ(23, 5) +#define EXYNOS5_IRQ_MCT_G3 COMBINER_IRQ(23, 6) + +#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0) +#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1) +#define EXYNOS5_IRQ_SYSMMU_LITE1_1 COMBINER_IRQ(24, 2) +#define EXYNOS5_IRQ_SYSMMU_2D_0 COMBINER_IRQ(24, 5) +#define EXYNOS5_IRQ_SYSMMU_2D_1 COMBINER_IRQ(24, 6) + +#define EXYNOS5_IRQ_EINT2 COMBINER_IRQ(25, 0) +#define EXYNOS5_IRQ_EINT3 COMBINER_IRQ(25, 1) + +#define EXYNOS5_IRQ_EINT4 COMBINER_IRQ(26, 0) +#define EXYNOS5_IRQ_EINT5 COMBINER_IRQ(26, 1) + +#define EXYNOS5_IRQ_EINT6 COMBINER_IRQ(27, 0) +#define EXYNOS5_IRQ_EINT7 COMBINER_IRQ(27, 1) + +#define EXYNOS5_IRQ_EINT8 COMBINER_IRQ(28, 0) +#define EXYNOS5_IRQ_EINT9 COMBINER_IRQ(28, 1) + +#define EXYNOS5_IRQ_EINT10 COMBINER_IRQ(29, 0) +#define EXYNOS5_IRQ_EINT11 COMBINER_IRQ(29, 1) + +#define EXYNOS5_IRQ_EINT12 COMBINER_IRQ(30, 0) +#define EXYNOS5_IRQ_EINT13 COMBINER_IRQ(30, 1) + +#define EXYNOS5_IRQ_EINT14 COMBINER_IRQ(31, 0) +#define EXYNOS5_IRQ_EINT15 COMBINER_IRQ(31, 1) + +#define EXYNOS5_MAX_COMBINER_NR 32 + +#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 13 +#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9 +#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5 +#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1 + +#define MAX_COMBINER_NR (EXYNOS4_MAX_COMBINER_NR > EXYNOS5_MAX_COMBINER_NR ? \ + EXYNOS4_MAX_COMBINER_NR : EXYNOS5_MAX_COMBINER_NR) + +#define S5P_EINT_BASE1 COMBINER_IRQ(MAX_COMBINER_NR, 0) +#define S5P_EINT_BASE2 (S5P_EINT_BASE1 + 16) +#define S5P_GPIOINT_BASE (S5P_EINT_BASE1 + 32) +#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) +#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) + +#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index c754a22a2bb3..024d38ff1718 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -25,12 +25,17 @@ #define EXYNOS4_PA_SYSRAM0 0x02025000 #define EXYNOS4_PA_SYSRAM1 0x02020000 +#define EXYNOS5_PA_SYSRAM 0x02020000 #define EXYNOS4_PA_FIMC0 0x11800000 #define EXYNOS4_PA_FIMC1 0x11810000 #define EXYNOS4_PA_FIMC2 0x11820000 #define EXYNOS4_PA_FIMC3 0x11830000 +#define EXYNOS4_PA_JPEG 0x11840000 + +#define EXYNOS4_PA_G2D 0x12800000 + #define EXYNOS4_PA_I2S0 0x03830000 #define EXYNOS4_PA_I2S1 0xE3100000 #define EXYNOS4_PA_I2S2 0xE2A00000 @@ -44,30 +49,44 @@ #define EXYNOS4_PA_ONENAND 0x0C000000 #define EXYNOS4_PA_ONENAND_DMA 0x0C600000 -#define EXYNOS4_PA_CHIPID 0x10000000 +#define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000 +#define EXYNOS5_PA_SYSCON 0x10050100 + #define EXYNOS4_PA_PMU 0x10020000 +#define EXYNOS5_PA_PMU 0x10040000 + #define EXYNOS4_PA_CMU 0x10030000 +#define EXYNOS5_PA_CMU 0x10010000 #define EXYNOS4_PA_SYSTIMER 0x10050000 +#define EXYNOS5_PA_SYSTIMER 0x101C0000 + #define EXYNOS4_PA_WATCHDOG 0x10060000 +#define EXYNOS5_PA_WATCHDOG 0x101D0000 + #define EXYNOS4_PA_RTC 0x10070000 #define EXYNOS4_PA_KEYPAD 0x100A0000 #define EXYNOS4_PA_DMC0 0x10400000 +#define EXYNOS4_PA_DMC1 0x10410000 #define EXYNOS4_PA_COMBINER 0x10440000 +#define EXYNOS5_PA_COMBINER 0x10440000 #define EXYNOS4_PA_GIC_CPU 0x10480000 #define EXYNOS4_PA_GIC_DIST 0x10490000 +#define EXYNOS5_PA_GIC_CPU 0x10480000 +#define EXYNOS5_PA_GIC_DIST 0x10490000 #define EXYNOS4_PA_COREPERI 0x10500000 #define EXYNOS4_PA_TWD 0x10500600 #define EXYNOS4_PA_L2CC 0x10502000 -#define EXYNOS4_PA_MDMA 0x10810000 +#define EXYNOS4_PA_MDMA0 0x10810000 +#define EXYNOS4_PA_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 @@ -91,10 +110,13 @@ #define EXYNOS4_PA_SPI1 0x13930000 #define EXYNOS4_PA_SPI2 0x13940000 - #define EXYNOS4_PA_GPIO1 0x11400000 #define EXYNOS4_PA_GPIO2 0x11000000 #define EXYNOS4_PA_GPIO3 0x03860000 +#define EXYNOS5_PA_GPIO1 0x11400000 +#define EXYNOS5_PA_GPIO2 0x13400000 +#define EXYNOS5_PA_GPIO3 0x10D10000 +#define EXYNOS5_PA_GPIO4 0x03860000 #define EXYNOS4_PA_MIPI_CSIS0 0x11880000 #define EXYNOS4_PA_MIPI_CSIS1 0x11890000 @@ -109,6 +131,7 @@ #define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000 #define EXYNOS4_PA_SROMC 0x12570000 +#define EXYNOS5_PA_SROMC 0x12250000 #define EXYNOS4_PA_EHCI 0x12580000 #define EXYNOS4_PA_OHCI 0x12590000 @@ -116,6 +139,7 @@ #define EXYNOS4_PA_MFC 0x13400000 #define EXYNOS4_PA_UART 0x13800000 +#define EXYNOS5_PA_UART 0x12C00000 #define EXYNOS4_PA_VP 0x12C00000 #define EXYNOS4_PA_MIXER 0x12C10000 @@ -124,6 +148,7 @@ #define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000 #define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) +#define EXYNOS5_PA_IIC(x) (0x12C60000 + ((x) * 0x10000)) #define EXYNOS4_PA_ADC 0x13910000 #define EXYNOS4_PA_ADC1 0x13911000 @@ -133,8 +158,10 @@ #define EXYNOS4_PA_SPDIF 0x139B0000 #define EXYNOS4_PA_TIMER 0x139D0000 +#define EXYNOS5_PA_TIMER 0x12DD0000 #define EXYNOS4_PA_SDRAM 0x40000000 +#define EXYNOS5_PA_SDRAM 0x40000000 /* Compatibiltiy Defines */ @@ -152,7 +179,6 @@ #define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) #define S3C_PA_RTC EXYNOS4_PA_RTC #define S3C_PA_WDT EXYNOS4_PA_WATCHDOG -#define S3C_PA_UART EXYNOS4_PA_UART #define S3C_PA_SPI0 EXYNOS4_PA_SPI0 #define S3C_PA_SPI1 EXYNOS4_PA_SPI1 #define S3C_PA_SPI2 EXYNOS4_PA_SPI2 @@ -162,6 +188,8 @@ #define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1 #define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2 #define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3 +#define S5P_PA_JPEG EXYNOS4_PA_JPEG +#define S5P_PA_G2D EXYNOS4_PA_G2D #define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0 #define S5P_PA_HDMI EXYNOS4_PA_HDMI #define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY @@ -181,15 +209,18 @@ /* Compatibility UART */ -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define EXYNOS4_PA_UART0 0x13800000 +#define EXYNOS4_PA_UART1 0x13810000 +#define EXYNOS4_PA_UART2 0x13820000 +#define EXYNOS4_PA_UART3 0x13830000 +#define EXYNOS4_SZ_UART SZ_256 -#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_UART4 S5P_PA_UART(4) +#define EXYNOS5_PA_UART0 0x12C00000 +#define EXYNOS5_PA_UART1 0x12C10000 +#define EXYNOS5_PA_UART2 0x12C20000 +#define EXYNOS5_PA_UART3 0x12C30000 +#define EXYNOS5_SZ_UART SZ_256 -#define S5P_SZ_UART SZ_256 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-exynos/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h index 632dd5630138..e76b7faba66b 100644 --- a/arch/arm/mach-exynos/include/mach/pmu.h +++ b/arch/arm/mach-exynos/include/mach/pmu.h @@ -22,11 +22,13 @@ enum sys_powerdown { NUM_SYS_POWERDOWN, }; +extern unsigned long l2x0_regs_phys; struct exynos4_pmu_conf { void __iomem *reg; unsigned int val[NUM_SYS_POWERDOWN]; }; extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode); +extern void s3c_cpu_resume(void); #endif /* __ASM_ARCH_PMU_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index 6c37ebe94829..e141c1fd68d8 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -16,195 +16,309 @@ #include <plat/cpu.h> #include <mach/map.h> -#define S5P_CLKREG(x) (S5P_VA_CMU + (x)) - -#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500) -#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600) -#define S5P_CLKGATE_IP_LEFTBUS S5P_CLKREG(0x04800) - -#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500) -#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) -#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800) - -#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010) -#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020) - -#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) -#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) -#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) -#define S5P_VPLL_CON1 S5P_CLKREG(0x0C124) - -#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) -#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) -#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) -#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224) -#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228) -#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C) -#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) -#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) -#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C) -#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) -#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) -#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) - -#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) -#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) -#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) -#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) -#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) -#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) -#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) -#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) - -#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) -#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) -#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524) -#define S5P_CLKDIV_MFC S5P_CLKREG(0x0C528) -#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C) -#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) -#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) -#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C) -#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) -#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) -#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548) -#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C) -#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550) -#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554) -#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558) -#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C) -#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) -#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) -#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580) - -#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) - -#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820) -#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) -#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924) -#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928) -#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C) -#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \ - S5P_CLKREG(0x0C930) : \ - S5P_CLKREG(0x04930)) -#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930) -#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930) -#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) -#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) -#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C) -#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) -#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \ - S5P_CLKREG(0x0C960) : \ - S5P_CLKREG(0x08960)) -#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960) -#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960) -#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970) - -#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300) -#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200) -#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500) -#define S5P_CLKDIV_DMC1 S5P_CLKREG(0x10504) -#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600) -#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900) - -#define S5P_APLL_LOCK S5P_CLKREG(0x14000) -#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \ - S5P_CLKREG(0x14004) : \ - S5P_CLKREG(0x10008)) -#define S5P_APLL_CON0 S5P_CLKREG(0x14100) -#define S5P_APLL_CON1 S5P_CLKREG(0x14104) -#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \ - S5P_CLKREG(0x14108) : \ - S5P_CLKREG(0x10108)) -#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \ - S5P_CLKREG(0x1410C) : \ - S5P_CLKREG(0x1010C)) - -#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200) -#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) - -#define S5P_CLKDIV_CPU S5P_CLKREG(0x14500) -#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504) -#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600) -#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604) - -#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) -#define S5P_CLKGATE_IP_CPU S5P_CLKREG(0x14900) - -#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */ - -#define S5P_APLLCON0_ENABLE_SHIFT (31) -#define S5P_APLLCON0_LOCKED_SHIFT (29) -#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) -#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) - -#define S5P_EPLLCON0_ENABLE_SHIFT (31) -#define S5P_EPLLCON0_LOCKED_SHIFT (29) - -#define S5P_VPLLCON0_ENABLE_SHIFT (31) -#define S5P_VPLLCON0_LOCKED_SHIFT (29) - -#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) -#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) - -#define S5P_CLKDIV_CPU0_CORE_SHIFT (0) -#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT) -#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4) -#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT) -#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8) -#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT) -#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12) -#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT) -#define S5P_CLKDIV_CPU0_ATB_SHIFT (16) -#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT) -#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20) -#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) -#define S5P_CLKDIV_CPU0_APLL_SHIFT (24) -#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT) - -#define S5P_CLKDIV_DMC0_ACP_SHIFT (0) -#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT) -#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4) -#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) -#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8) -#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT) -#define S5P_CLKDIV_DMC0_DMC_SHIFT (12) -#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT) -#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16) -#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT) -#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20) -#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT) -#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24) -#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT) -#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28) -#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT) - -#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0) -#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT) -#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4) -#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT) -#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8) -#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT) -#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12) -#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT) -#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16) -#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT) - -#define S5P_CLKDIV_BUS_GDLR_SHIFT (0) -#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT) -#define S5P_CLKDIV_BUS_GPLR_SHIFT (4) -#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) +#define EXYNOS_CLKREG(x) (S5P_VA_CMU + (x)) + +#define EXYNOS4_CLKDIV_LEFTBUS EXYNOS_CLKREG(0x04500) +#define EXYNOS4_CLKDIV_STAT_LEFTBUS EXYNOS_CLKREG(0x04600) +#define EXYNOS4_CLKGATE_IP_LEFTBUS EXYNOS_CLKREG(0x04800) + +#define EXYNOS4_CLKDIV_RIGHTBUS EXYNOS_CLKREG(0x08500) +#define EXYNOS4_CLKDIV_STAT_RIGHTBUS EXYNOS_CLKREG(0x08600) +#define EXYNOS4_CLKGATE_IP_RIGHTBUS EXYNOS_CLKREG(0x08800) + +#define EXYNOS4_EPLL_LOCK EXYNOS_CLKREG(0x0C010) +#define EXYNOS4_VPLL_LOCK EXYNOS_CLKREG(0x0C020) + +#define EXYNOS4_EPLL_CON0 EXYNOS_CLKREG(0x0C110) +#define EXYNOS4_EPLL_CON1 EXYNOS_CLKREG(0x0C114) +#define EXYNOS4_VPLL_CON0 EXYNOS_CLKREG(0x0C120) +#define EXYNOS4_VPLL_CON1 EXYNOS_CLKREG(0x0C124) + +#define EXYNOS4_CLKSRC_TOP0 EXYNOS_CLKREG(0x0C210) +#define EXYNOS4_CLKSRC_TOP1 EXYNOS_CLKREG(0x0C214) +#define EXYNOS4_CLKSRC_CAM EXYNOS_CLKREG(0x0C220) +#define EXYNOS4_CLKSRC_TV EXYNOS_CLKREG(0x0C224) +#define EXYNOS4_CLKSRC_MFC EXYNOS_CLKREG(0x0C228) +#define EXYNOS4_CLKSRC_G3D EXYNOS_CLKREG(0x0C22C) +#define EXYNOS4_CLKSRC_IMAGE EXYNOS_CLKREG(0x0C230) +#define EXYNOS4_CLKSRC_LCD0 EXYNOS_CLKREG(0x0C234) +#define EXYNOS4_CLKSRC_MAUDIO EXYNOS_CLKREG(0x0C23C) +#define EXYNOS4_CLKSRC_FSYS EXYNOS_CLKREG(0x0C240) +#define EXYNOS4_CLKSRC_PERIL0 EXYNOS_CLKREG(0x0C250) +#define EXYNOS4_CLKSRC_PERIL1 EXYNOS_CLKREG(0x0C254) + +#define EXYNOS4_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x0C310) +#define EXYNOS4_CLKSRC_MASK_CAM EXYNOS_CLKREG(0x0C320) +#define EXYNOS4_CLKSRC_MASK_TV EXYNOS_CLKREG(0x0C324) +#define EXYNOS4_CLKSRC_MASK_LCD0 EXYNOS_CLKREG(0x0C334) +#define EXYNOS4_CLKSRC_MASK_MAUDIO EXYNOS_CLKREG(0x0C33C) +#define EXYNOS4_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x0C340) +#define EXYNOS4_CLKSRC_MASK_PERIL0 EXYNOS_CLKREG(0x0C350) +#define EXYNOS4_CLKSRC_MASK_PERIL1 EXYNOS_CLKREG(0x0C354) + +#define EXYNOS4_CLKDIV_TOP EXYNOS_CLKREG(0x0C510) +#define EXYNOS4_CLKDIV_CAM EXYNOS_CLKREG(0x0C520) +#define EXYNOS4_CLKDIV_TV EXYNOS_CLKREG(0x0C524) +#define EXYNOS4_CLKDIV_MFC EXYNOS_CLKREG(0x0C528) +#define EXYNOS4_CLKDIV_G3D EXYNOS_CLKREG(0x0C52C) +#define EXYNOS4_CLKDIV_IMAGE EXYNOS_CLKREG(0x0C530) +#define EXYNOS4_CLKDIV_LCD0 EXYNOS_CLKREG(0x0C534) +#define EXYNOS4_CLKDIV_MAUDIO EXYNOS_CLKREG(0x0C53C) +#define EXYNOS4_CLKDIV_FSYS0 EXYNOS_CLKREG(0x0C540) +#define EXYNOS4_CLKDIV_FSYS1 EXYNOS_CLKREG(0x0C544) +#define EXYNOS4_CLKDIV_FSYS2 EXYNOS_CLKREG(0x0C548) +#define EXYNOS4_CLKDIV_FSYS3 EXYNOS_CLKREG(0x0C54C) +#define EXYNOS4_CLKDIV_PERIL0 EXYNOS_CLKREG(0x0C550) +#define EXYNOS4_CLKDIV_PERIL1 EXYNOS_CLKREG(0x0C554) +#define EXYNOS4_CLKDIV_PERIL2 EXYNOS_CLKREG(0x0C558) +#define EXYNOS4_CLKDIV_PERIL3 EXYNOS_CLKREG(0x0C55C) +#define EXYNOS4_CLKDIV_PERIL4 EXYNOS_CLKREG(0x0C560) +#define EXYNOS4_CLKDIV_PERIL5 EXYNOS_CLKREG(0x0C564) +#define EXYNOS4_CLKDIV2_RATIO EXYNOS_CLKREG(0x0C580) + +#define EXYNOS4_CLKDIV_STAT_TOP EXYNOS_CLKREG(0x0C610) +#define EXYNOS4_CLKDIV_STAT_MFC EXYNOS_CLKREG(0x0C628) + +#define EXYNOS4_CLKGATE_SCLKCAM EXYNOS_CLKREG(0x0C820) +#define EXYNOS4_CLKGATE_IP_CAM EXYNOS_CLKREG(0x0C920) +#define EXYNOS4_CLKGATE_IP_TV EXYNOS_CLKREG(0x0C924) +#define EXYNOS4_CLKGATE_IP_MFC EXYNOS_CLKREG(0x0C928) +#define EXYNOS4_CLKGATE_IP_G3D EXYNOS_CLKREG(0x0C92C) +#define EXYNOS4_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x0C930) : \ + EXYNOS_CLKREG(0x04930)) +#define EXYNOS4210_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x0C930) +#define EXYNOS4212_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x04930) +#define EXYNOS4_CLKGATE_IP_LCD0 EXYNOS_CLKREG(0x0C934) +#define EXYNOS4_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x0C940) +#define EXYNOS4_CLKGATE_IP_GPS EXYNOS_CLKREG(0x0C94C) +#define EXYNOS4_CLKGATE_IP_PERIL EXYNOS_CLKREG(0x0C950) +#define EXYNOS4_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x0C960) : \ + EXYNOS_CLKREG(0x08960)) +#define EXYNOS4210_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x0C960) +#define EXYNOS4212_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x08960) +#define EXYNOS4_CLKGATE_BLOCK EXYNOS_CLKREG(0x0C970) + +#define EXYNOS4_CLKSRC_MASK_DMC EXYNOS_CLKREG(0x10300) +#define EXYNOS4_CLKSRC_DMC EXYNOS_CLKREG(0x10200) +#define EXYNOS4_CLKDIV_DMC0 EXYNOS_CLKREG(0x10500) +#define EXYNOS4_CLKDIV_DMC1 EXYNOS_CLKREG(0x10504) +#define EXYNOS4_CLKDIV_STAT_DMC0 EXYNOS_CLKREG(0x10600) +#define EXYNOS4_CLKDIV_STAT_DMC1 EXYNOS_CLKREG(0x10604) +#define EXYNOS4_CLKGATE_IP_DMC EXYNOS_CLKREG(0x10900) + +#define EXYNOS4_DMC_PAUSE_CTRL EXYNOS_CLKREG(0x11094) +#define EXYNOS4_DMC_PAUSE_ENABLE (1 << 0) + +#define EXYNOS4_APLL_LOCK EXYNOS_CLKREG(0x14000) +#define EXYNOS4_MPLL_LOCK (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x14004) : \ + EXYNOS_CLKREG(0x10008)) +#define EXYNOS4_APLL_CON0 EXYNOS_CLKREG(0x14100) +#define EXYNOS4_APLL_CON1 EXYNOS_CLKREG(0x14104) +#define EXYNOS4_MPLL_CON0 (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x14108) : \ + EXYNOS_CLKREG(0x10108)) +#define EXYNOS4_MPLL_CON1 (soc_is_exynos4210() ? \ + EXYNOS_CLKREG(0x1410C) : \ + EXYNOS_CLKREG(0x1010C)) + +#define EXYNOS4_CLKSRC_CPU EXYNOS_CLKREG(0x14200) +#define EXYNOS4_CLKMUX_STATCPU EXYNOS_CLKREG(0x14400) + +#define EXYNOS4_CLKDIV_CPU EXYNOS_CLKREG(0x14500) +#define EXYNOS4_CLKDIV_CPU1 EXYNOS_CLKREG(0x14504) +#define EXYNOS4_CLKDIV_STATCPU EXYNOS_CLKREG(0x14600) +#define EXYNOS4_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x14604) + +#define EXYNOS4_CLKGATE_SCLKCPU EXYNOS_CLKREG(0x14800) +#define EXYNOS4_CLKGATE_IP_CPU EXYNOS_CLKREG(0x14900) + +#define EXYNOS4_APLL_LOCKTIME (0x1C20) /* 300us */ + +#define EXYNOS4_APLLCON0_ENABLE_SHIFT (31) +#define EXYNOS4_APLLCON0_LOCKED_SHIFT (29) +#define EXYNOS4_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) +#define EXYNOS4_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) + +#define EXYNOS4_EPLLCON0_ENABLE_SHIFT (31) +#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29) + +#define EXYNOS4_VPLLCON0_ENABLE_SHIFT (31) +#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29) + +#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16) +#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT) + +#define EXYNOS4_CLKDIV_CPU0_CORE_SHIFT (0) +#define EXYNOS4_CLKDIV_CPU0_CORE_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT (4) +#define EXYNOS4_CLKDIV_CPU0_COREM0_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT (8) +#define EXYNOS4_CLKDIV_CPU0_COREM1_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT (12) +#define EXYNOS4_CLKDIV_CPU0_PERIPH_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_ATB_SHIFT (16) +#define EXYNOS4_CLKDIV_CPU0_ATB_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT (20) +#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_APLL_SHIFT (24) +#define EXYNOS4_CLKDIV_CPU0_APLL_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT) +#define EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT 28 +#define EXYNOS4_CLKDIV_CPU0_CORE2_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT) + +#define EXYNOS4_CLKDIV_CPU1_COPY_SHIFT 0 +#define EXYNOS4_CLKDIV_CPU1_COPY_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) +#define EXYNOS4_CLKDIV_CPU1_HPM_SHIFT 4 +#define EXYNOS4_CLKDIV_CPU1_HPM_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT) +#define EXYNOS4_CLKDIV_CPU1_CORES_SHIFT 8 +#define EXYNOS4_CLKDIV_CPU1_CORES_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT) + +#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT (0) +#define EXYNOS4_CLKDIV_DMC0_ACP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT (4) +#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT (8) +#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT (12) +#define EXYNOS4_CLKDIV_DMC0_DMC_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT (16) +#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT (20) +#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT (24) +#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) +#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT (28) +#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT) + +#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT (0) +#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK (0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT (4) +#define EXYNOS4_CLKDIV_DMC1_C2C_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT (8) +#define EXYNOS4_CLKDIV_DMC1_PWI_MASK (0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT (12) +#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT (16) +#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT) +#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT (24) +#define EXYNOS4_CLKDIV_DMC1_DPM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT) + +#define EXYNOS4_CLKDIV_MFC_SHIFT (0) +#define EXYNOS4_CLKDIV_MFC_MASK (0x7 << EXYNOS4_CLKDIV_MFC_SHIFT) + +#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT (0) +#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT (4) +#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK (0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT (8) +#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT (12) +#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT (16) +#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT (20) +#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) +#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT (24) +#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT) + +#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT (0) +#define EXYNOS4_CLKDIV_BUS_GDLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) +#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT (4) +#define EXYNOS4_CLKDIV_BUS_GPLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT) + +#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT (0) +#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) +#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT (4) +#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) +#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT (8) +#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) +#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT (12) +#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT) /* Only for EXYNOS4210 */ -#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) -#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) -#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) -#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) +#define EXYNOS4210_CLKSRC_LCD1 EXYNOS_CLKREG(0x0C238) +#define EXYNOS4210_CLKSRC_MASK_LCD1 EXYNOS_CLKREG(0x0C338) +#define EXYNOS4210_CLKDIV_LCD1 EXYNOS_CLKREG(0x0C538) +#define EXYNOS4210_CLKGATE_IP_LCD1 EXYNOS_CLKREG(0x0C938) + +/* Only for EXYNOS4212 */ + +#define EXYNOS4_CLKDIV_CAM1 EXYNOS_CLKREG(0x0C568) + +#define EXYNOS4_CLKDIV_STAT_CAM1 EXYNOS_CLKREG(0x0C668) + +#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0) +#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT) + +/* For EXYNOS5250 */ + +#define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100) +#define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200) +#define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500) +#define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100) +#define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204) + +#define EXYNOS5_CLKGATE_IP_CORE EXYNOS_CLKREG(0x04900) + +#define EXYNOS5_CLKDIV_ACP EXYNOS_CLKREG(0x08500) + +#define EXYNOS5_CLKSRC_TOP2 EXYNOS_CLKREG(0x10218) +#define EXYNOS5_EPLL_CON0 EXYNOS_CLKREG(0x10130) +#define EXYNOS5_EPLL_CON1 EXYNOS_CLKREG(0x10134) +#define EXYNOS5_VPLL_CON0 EXYNOS_CLKREG(0x10140) +#define EXYNOS5_VPLL_CON1 EXYNOS_CLKREG(0x10144) +#define EXYNOS5_CPLL_CON0 EXYNOS_CLKREG(0x10120) + +#define EXYNOS5_CLKSRC_TOP0 EXYNOS_CLKREG(0x10210) +#define EXYNOS5_CLKSRC_TOP3 EXYNOS_CLKREG(0x1021C) +#define EXYNOS5_CLKSRC_GSCL EXYNOS_CLKREG(0x10220) +#define EXYNOS5_CLKSRC_DISP1_0 EXYNOS_CLKREG(0x1022C) +#define EXYNOS5_CLKSRC_FSYS EXYNOS_CLKREG(0x10244) +#define EXYNOS5_CLKSRC_PERIC0 EXYNOS_CLKREG(0x10250) + +#define EXYNOS5_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x10310) +#define EXYNOS5_CLKSRC_MASK_GSCL EXYNOS_CLKREG(0x10320) +#define EXYNOS5_CLKSRC_MASK_DISP1_0 EXYNOS_CLKREG(0x1032C) +#define EXYNOS5_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x10340) +#define EXYNOS5_CLKSRC_MASK_PERIC0 EXYNOS_CLKREG(0x10350) + +#define EXYNOS5_CLKDIV_TOP0 EXYNOS_CLKREG(0x10510) +#define EXYNOS5_CLKDIV_TOP1 EXYNOS_CLKREG(0x10514) +#define EXYNOS5_CLKDIV_GSCL EXYNOS_CLKREG(0x10520) +#define EXYNOS5_CLKDIV_DISP1_0 EXYNOS_CLKREG(0x1052C) +#define EXYNOS5_CLKDIV_GEN EXYNOS_CLKREG(0x1053C) +#define EXYNOS5_CLKDIV_FSYS0 EXYNOS_CLKREG(0x10548) +#define EXYNOS5_CLKDIV_FSYS1 EXYNOS_CLKREG(0x1054C) +#define EXYNOS5_CLKDIV_FSYS2 EXYNOS_CLKREG(0x10550) +#define EXYNOS5_CLKDIV_FSYS3 EXYNOS_CLKREG(0x10554) +#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558) + +#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800) +#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920) +#define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928) +#define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C) +#define EXYNOS5_CLKGATE_IP_GEN EXYNOS_CLKREG(0x10934) +#define EXYNOS5_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x10944) +#define EXYNOS5_CLKGATE_IP_GPS EXYNOS_CLKREG(0x1094C) +#define EXYNOS5_CLKGATE_IP_PERIC EXYNOS_CLKREG(0x10950) +#define EXYNOS5_CLKGATE_IP_PERIS EXYNOS_CLKREG(0x10960) +#define EXYNOS5_CLKGATE_BLOCK EXYNOS_CLKREG(0x10980) + +#define EXYNOS5_BPLL_CON0 EXYNOS_CLKREG(0x20110) +#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200) +#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500) + +#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030) + +#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29) /* Compatibility defines and inclusion */ #include <mach/regs-pmu.h> -#define S5P_EPLL_CON S5P_EPLL_CON0 +#define S5P_EPLL_CON EXYNOS4_EPLL_CON0 #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h index 1401b21663a5..e4b5b60dcb85 100644 --- a/arch/arm/mach-exynos/include/mach/regs-gpio.h +++ b/arch/arm/mach-exynos/include/mach/regs-gpio.h @@ -16,6 +16,15 @@ #include <mach/map.h> #include <mach/irqs.h> +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) +#define EINT_CON(b, x) (b + 0xE00 + (EINT_REG_NR(x) * 4)) +#define EINT_FLTCON(b, x) (b + 0xE80 + (EINT_REG_NR(x) * 4)) +#define EINT_MASK(b, x) (b + 0xF00 + (EINT_REG_NR(x) * 4)) +#define EINT_PEND(b, x) (b + 0xF40 + (EINT_REG_NR(x) * 4)) + +#define EINT_OFFSET_BIT(x) (1 << (EINT_OFFSET(x) & 0x7)) + +/* compatibility for plat-s5p/irq-pm.c */ #define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00) #define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4)) @@ -28,15 +37,4 @@ #define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40) #define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4)) -#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) - -#define EINT_MODE S3C_GPIO_SFN(0xf) - -#define EINT_GPIO_0(x) EXYNOS4_GPX0(x) -#define EINT_GPIO_1(x) EXYNOS4_GPX1(x) -#define EINT_GPIO_2(x) EXYNOS4_GPX2(x) -#define EINT_GPIO_3(x) EXYNOS4_GPX3(x) - #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 4fff8e938fec..4c53f38b5a9e 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -31,6 +31,7 @@ #define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26) #define S5P_SWRESET S5P_PMUREG(0x0400) +#define EXYNOS_SWRESET S5P_PMUREG(0x0400) #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h deleted file mode 100644 index 0063a6de3dc8..000000000000 --- a/arch/arm/mach-exynos/include/mach/system.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/system.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h index 21d97bcd9acb..493f4f365ddf 100644 --- a/arch/arm/mach-exynos/include/mach/uncompress.h +++ b/arch/arm/mach-exynos/include/mach/uncompress.h @@ -1,9 +1,8 @@ -/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * EXYNOS4 - uncompress code + * EXYNOS - uncompress code * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,12 +12,20 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H __FILE__ +#include <asm/mach-types.h> + #include <mach/map.h> + +volatile u8 *uart_base; + #include <plat/uncompress.h> static void arch_detect_cpu(void) { - /* we do not need to do any cpu detection here at the moment. */ + if (machine_is_smdk5250()) + uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); + else + uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); /* * For preventing FIFO overrun or infinite loop of UART console, diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e6b02fdf1b09..8245f1c761d9 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -37,13 +37,13 @@ * data from the device tree. */ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0, + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0, "exynos4210-uart.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1, + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1, "exynos4210-uart.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2, + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2, "exynos4210-uart.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3, + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3, "exynos4210-uart.3", NULL), OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0), "exynos4-sdhci.0", NULL), diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c new file mode 100644 index 000000000000..0d26f50081ad --- /dev/null +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -0,0 +1,78 @@ +/* + * SAMSUNG EXYNOS5250 Flattened Device Tree enabled machine + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/hardware/gic.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/regs-serial.h> + +#include "common.h" + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the EXYNOS5 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0, + "exynos4210-uart.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1, + "exynos4210-uart.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2, + "exynos4210-uart.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3, + "exynos4210-uart.3", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL), + {}, +}; + +static void __init exynos5250_dt_map_io(void) +{ + exynos_init_io(NULL, 0); + s3c24xx_init_clocks(24000000); +} + +static void __init exynos5250_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + exynos5250_auxdata_lookup, NULL); +} + +static char const *exynos5250_dt_compat[] __initdata = { + "samsung,exynos5250", + NULL +}; + +DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .init_irq = exynos5_init_irq, + .map_io = exynos5250_dt_map_io, + .handle_irq = gic_handle_irq, + .init_machine = exynos5250_dt_machine_init, + .timer = &exynos4_timer, + .dt_compat = exynos5250_dt_compat, + .restart = exynos5_restart, +MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index aa37179d776c..b3982c867c9c 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -28,6 +28,7 @@ #include <video/platform_lcd.h> #include <media/m5mols.h> +#include <media/s5k6aa.h> #include <media/s5p_fimc.h> #include <media/v4l2-mediabus.h> @@ -75,6 +76,7 @@ enum fixed_regulator_id { FIXED_REG_ID_MAX8903, FIXED_REG_ID_CAM_A28V, FIXED_REG_ID_CAM_12V, + FIXED_REG_ID_CAM_VT_15V, }; static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { @@ -109,13 +111,13 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE | MMC_CAP_ERASE), + MMC_CAP_ERASE), .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct regulator_consumer_supply emmc_supplies[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), + REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"), REGULATOR_SUPPLY("vmmc", "dw_mmc"), }; @@ -148,8 +150,7 @@ static struct platform_device emmc_fixed_voltage = { static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, @@ -399,6 +400,9 @@ static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { static struct regulator_consumer_supply __initdata max8997_ldo5_[] = { REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */ }; +static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = { + REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */ +}; static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ }; @@ -413,7 +417,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo12_[] = { REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */ }; static struct regulator_consumer_supply __initdata max8997_ldo13_[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */ + REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */ }; static struct regulator_consumer_supply __initdata max8997_ldo14_[] = { REGULATOR_SUPPLY("inmotor", "max8997-haptic"), @@ -431,7 +435,7 @@ static struct regulator_consumer_supply __initdata max8997_buck1_[] = { REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ }; static struct regulator_consumer_supply __initdata max8997_buck2_[] = { - REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ + REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */ }; static struct regulator_consumer_supply __initdata max8997_buck3_[] = { REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */ @@ -546,6 +550,8 @@ static struct regulator_init_data __initdata max8997_ldo6_data = { .enabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer), + .consumer_supplies = nuri_max8997_ldo6_consumer, }; static struct regulator_init_data __initdata max8997_ldo7_data = { @@ -742,7 +748,7 @@ static struct regulator_init_data __initdata max8997_buck2_data = { .constraints = { .name = "VINT_1.1V_C210", .min_uV = 900000, - .max_uV = 1100000, + .max_uV = 1200000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, .always_on = 1, .state_mem = { @@ -957,7 +963,6 @@ static struct max8997_platform_data __initdata nuri_max8997_pdata = { .regulators = nuri_max8997_regulators, .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) }, - .buck2_gpiodvs = true, .buck1_voltage[0] = 1350000, /* 1.35V */ .buck1_voltage[1] = 1300000, /* 1.3V */ @@ -1116,7 +1121,30 @@ static void __init nuri_ehci_init(void) } /* CAMERA */ +static struct regulator_consumer_supply cam_vt_cam15_supply = + REGULATOR_SUPPLY("vdd_core", "6-003c"); + +static struct regulator_init_data cam_vt_cam15_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_vt_cam15_supply, +}; + +static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = { + .supply_name = "VT_CAM_1.5V", + .microvolts = 1500000, + .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */ + .enable_high = 1, + .init_data = &cam_vt_cam15_reg_init_data, +}; + +static struct platform_device cam_vt_cam15_fixed_rdev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V, + .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg }, +}; + static struct regulator_consumer_supply cam_vdda_supply[] = { + REGULATOR_SUPPLY("vdda", "6-003c"), REGULATOR_SUPPLY("a_sensor", "0-001f"), }; @@ -1173,6 +1201,21 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = { #define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */ #define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5) +#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0) +#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1) + +static struct s5k6aa_platform_data s5k6aa_pldata = { + .mclk_frequency = 24000000UL, + .gpio_reset = { GPIO_CAM_VT_NRST, 0 }, + .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 }, + .bus_type = V4L2_MBUS_PARALLEL, + .horiz_flip = 1, +}; + +static struct i2c_board_info s5k6aa_board_info = { + I2C_BOARD_INFO("S5K6AA", 0x3c), + .platform_data = &s5k6aa_pldata, +}; static struct m5mols_platform_data m5mols_platdata = { .gpio_reset = GPIO_CAM_MEGA_RST, @@ -1185,6 +1228,13 @@ static struct i2c_board_info m5mols_board_info = { static struct s5p_fimc_isp_info nuri_camera_sensors[] = { { + .flags = V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &s5k6aa_board_info, + .clk_frequency = 24000000UL, + .i2c_bus_num = 6, + }, { .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, .bus_type = FIMC_MIPI_CSI2, @@ -1200,11 +1250,13 @@ static struct s5p_platform_fimc fimc_md_platdata = { }; static struct gpio nuri_camera_gpios[] = { + { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, + { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, }; -static void nuri_camera_init(void) +static void __init nuri_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), &s5p_device_mipi_csis0); @@ -1224,6 +1276,8 @@ static void nuri_camera_init(void) pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__); /* Free GPIOs controlled directly by the sensor drivers. */ + gpio_free(GPIO_CAM_VT_NRST); + gpio_free(GPIO_CAM_VT_NSTBY); gpio_free(GPIO_CAM_MEGA_RST); if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) { @@ -1234,15 +1288,27 @@ static void nuri_camera_init(void) s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4); } +static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = { + .frequency = 400000U, + .sda_delay = 200, + .bus_num = 6, +}; + static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = { .frequency = 400000U, .sda_delay = 200, }; +/* DEVFREQ controlling memory/bus */ +static struct platform_device exynos4_bus_devfreq = { + .name = "exynos4210-busfreq", +}; + static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ &s3c_device_i2c5, /* PMIC should initialize first */ &s3c_device_i2c0, + &s3c_device_i2c6, &emmc_fixed_voltage, &s5p_device_mipi_csis0, &s5p_device_fimc0, @@ -1259,6 +1325,8 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_i2c3, &i2c9_gpio, &s3c_device_adc, + &s5p_device_g2d, + &s5p_device_jpeg, &s3c_device_rtc, &s5p_device_mfc, &s5p_device_mfc_l, @@ -1271,8 +1339,10 @@ static struct platform_device *nuri_devices[] __initdata = { &nuri_backlight_device, &max8903_fixed_reg_dev, &nuri_max8903_device, + &cam_vt_cam15_fixed_rdev, &cam_vdda_fixed_rdev, &cam_8m_12v_fixed_rdev, + &exynos4_bus_devfreq, }; static void __init nuri_map_io(void) @@ -1302,6 +1372,7 @@ static void __init nuri_machine_init(void) i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); + s3c_i2c6_set_platdata(&nuri_i2c6_platdata); s5p_fimd0_set_platdata(&nuri_fb_pdata); diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index fa5c4a59b0aa..878d4c99142d 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -20,6 +20,7 @@ #include <linux/regulator/machine.h> #include <linux/mfd/max8997.h> #include <linux/lcd.h> +#include <linux/rfkill-gpio.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -235,6 +236,7 @@ static struct regulator_init_data __initdata max8997_ldo9_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -278,6 +280,7 @@ static struct regulator_init_data __initdata max8997_ldo14_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -293,6 +296,7 @@ static struct regulator_init_data __initdata max8997_ldo17_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -412,7 +416,7 @@ static struct max8997_regulator_data __initdata origen_max8997_regulators[] = { { MAX8997_BUCK7, &max8997_buck7_data }, }; -struct max8997_platform_data __initdata origen_max8997_pdata = { +static struct max8997_platform_data __initdata origen_max8997_pdata = { .num_regulators = ARRAY_SIZE(origen_max8997_regulators), .regulators = origen_max8997_regulators, @@ -602,6 +606,23 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = { .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +/* Bluetooth rfkill gpio platform data */ +struct rfkill_gpio_platform_data origen_bt_pdata = { + .reset_gpio = EXYNOS4_GPX2(2), + .shutdown_gpio = -1, + .type = RFKILL_TYPE_BLUETOOTH, + .name = "origen-bt", +}; + +/* Bluetooth Platform device */ +static struct platform_device origen_device_bluetooth = { + .name = "rfkill_gpio", + .id = -1, + .dev = { + .platform_data = &origen_bt_pdata, + }, +}; + static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc2, &s3c_device_hsmmc0, @@ -613,9 +634,12 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_fimc_md, &s5p_device_fimd0, + &s5p_device_g2d, &s5p_device_hdmi, &s5p_device_i2c_hdmiphy, + &s5p_device_jpeg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -623,6 +647,7 @@ static struct platform_device *origen_devices[] __initdata = { &exynos4_device_ohci, &origen_device_gpiokeys, &origen_lcd_hv070wsa, + &origen_device_bluetooth, }; /* LCD Backlight data */ @@ -636,6 +661,16 @@ static struct platform_pwm_backlight_data origen_bl_data = { .pwm_period_ns = 1000, }; +static void __init origen_bt_setup(void) +{ + gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART"); + /* 4 UART Pins configuration */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2)); + /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */ + s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT); + s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); +} + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -689,6 +724,8 @@ static void __init origen_machine_init(void) platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); + + origen_bt_setup(); } MACHINE_START(ORIGEN, "ORIGEN") diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 5258b8563676..83b91fa777c1 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -270,6 +270,9 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_fimc_md, + &s5p_device_g2d, + &s5p_device_jpeg, &exynos4_device_ac97, &exynos4_device_i2s0, &exynos4_device_ohci, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index b2d495b31094..6bb9dbdd73fd 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -47,6 +47,7 @@ #include <media/v4l2-mediabus.h> #include <media/s5p_fimc.h> #include <media/m5mols.h> +#include <media/s5k6aa.h> #include "common.h" @@ -123,8 +124,10 @@ static struct regulator_consumer_supply lp3974_buck1_consumer = static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); -static struct regulator_consumer_supply lp3974_buck3_consumer = - REGULATOR_SUPPLY("vdet", "s5p-sdo"); +static struct regulator_consumer_supply lp3974_buck3_consumer[] = { + REGULATOR_SUPPLY("vdet", "s5p-sdo"), + REGULATOR_SUPPLY("vdd_reg", "0-003c"), +}; static struct regulator_init_data lp3974_buck1_data = { .constraints = { @@ -169,8 +172,8 @@ static struct regulator_init_data lp3974_buck3_data = { .enabled = 1, }, }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_buck3_consumer, + .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer), + .consumer_supplies = lp3974_buck3_consumer, }; static struct regulator_init_data lp3974_buck4_data = { @@ -303,6 +306,9 @@ static struct regulator_init_data lp3974_ldo8_data = { .consumer_supplies = lp3974_ldo8_consumer, }; +static struct regulator_consumer_supply lp3974_ldo9_consumer = + REGULATOR_SUPPLY("vddio", "0-003c"); + static struct regulator_init_data lp3974_ldo9_data = { .constraints = { .name = "VCC_2.8V", @@ -314,6 +320,8 @@ static struct regulator_init_data lp3974_ldo9_data = { .enabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_ldo9_consumer, }; static struct regulator_init_data lp3974_ldo10_data = { @@ -412,6 +420,7 @@ static struct regulator_init_data lp3974_ldo15_data = { }; static struct regulator_consumer_supply lp3974_ldo16_consumer[] = { + REGULATOR_SUPPLY("vdda", "0-003c"), REGULATOR_SUPPLY("a_sensor", "0-001f"), }; @@ -736,14 +745,13 @@ static struct platform_device universal_gpio_keys = { static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE), + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct regulator_consumer_supply mmc0_supplies[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), + REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"), }; static struct regulator_init_data mmc0_fixed_voltage_init_data = { @@ -775,8 +783,7 @@ static struct platform_device mmc0_fixed_voltage = { static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, @@ -787,8 +794,7 @@ static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .cd_type = S3C_SDHCI_CD_EXTERNAL, }; @@ -819,6 +825,8 @@ static struct s3c_fb_pd_win universal_fb_win0 = { }, .max_bpp = 32, .default_bpp = 16, + .virtual_x = 480, + .virtual_y = 2 * 800, }; static struct s3c_fb_platdata universal_lcd_pdata __initdata = { @@ -830,6 +838,28 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = { .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +static struct regulator_consumer_supply cam_vt_dio_supply = + REGULATOR_SUPPLY("vdd_core", "0-003c"); + +static struct regulator_init_data cam_vt_dio_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_vt_dio_supply, +}; + +static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = { + .supply_name = "CAM_VT_D_IO", + .microvolts = 2800000, + .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */ + .enable_high = 1, + .init_data = &cam_vt_dio_reg_init_data, +}; + +static struct platform_device cam_vt_dio_fixed_reg_dev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO, + .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg }, +}; + static struct regulator_consumer_supply cam_i_core_supply = REGULATOR_SUPPLY("core", "0-001f"); @@ -885,6 +915,28 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = { #define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3) #define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */ #define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5) +#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7) +#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6) + +static int s5k6aa_set_power(int on) +{ + gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on); + return 0; +} + +static struct s5k6aa_platform_data s5k6aa_platdata = { + .mclk_frequency = 21600000UL, + .gpio_reset = { GPIO_CAM_VGA_NRST, 0 }, + .gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 }, + .bus_type = V4L2_MBUS_PARALLEL, + .horiz_flip = 1, + .set_power = s5k6aa_set_power, +}; + +static struct i2c_board_info s5k6aa_board_info = { + I2C_BOARD_INFO("S5K6AA", 0x3C), + .platform_data = &s5k6aa_platdata, +}; static int m5mols_set_power(struct device *dev, int on) { @@ -909,6 +961,14 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &s5k6aa_board_info, + .i2c_bus_num = 0, + .clk_frequency = 24000000UL, + }, { + .mux_id = 0, + .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, .bus_type = FIMC_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, @@ -927,9 +987,11 @@ static struct gpio universal_camera_gpios[] = { { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" }, { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, + { GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, + { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, }; -static void universal_camera_init(void) +static void __init universal_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), &s5p_device_mipi_csis0); @@ -950,6 +1012,8 @@ static void universal_camera_init(void) /* Free GPIOs controlled directly by the sensor drivers. */ gpio_free(GPIO_CAM_MEGA_nRST); gpio_free(GPIO_CAM_8M_ISP_INT); + gpio_free(GPIO_CAM_VGA_NRST); + gpio_free(GPIO_CAM_VGA_NSTBY); if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) pr_err("Camera port A setup failed\n"); @@ -962,6 +1026,7 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_g2d, &mmc0_fixed_voltage, &s3c_device_hsmmc0, &s3c_device_hsmmc2, @@ -980,9 +1045,11 @@ static struct platform_device *universal_devices[] __initdata = { &universal_gpio_keys, &s5p_device_onenand, &s5p_device_fimd0, + &s5p_device_jpeg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, + &cam_vt_dio_fixed_reg_dev, &cam_i_core_fixed_reg_dev, &cam_s_if_fixed_reg_dev, &s5p_device_fimc_md, @@ -995,7 +1062,7 @@ static void __init universal_map_io(void) s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); } -void s5p_tv_setup(void) +static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 85b5527d0918..897d9a9cf226 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -21,6 +21,7 @@ #include <linux/percpu.h> #include <asm/hardware/gic.h> +#include <asm/localtimer.h> #include <plat/cpu.h> @@ -29,12 +30,13 @@ #include <mach/regs-mct.h> #include <asm/mach/time.h> +#define TICK_BASE_CNT 1 + enum { MCT_INT_SPI, MCT_INT_PPI }; -static unsigned long clk_cnt_per_tick; static unsigned long clk_rate; static unsigned int mct_int_type; @@ -205,11 +207,14 @@ static int exynos4_comp_set_next_event(unsigned long cycles, static void exynos4_comp_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { + unsigned long cycles_per_jiffy; exynos4_mct_comp0_stop(); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - exynos4_mct_comp0_start(mode, clk_cnt_per_tick); + cycles_per_jiffy = + (((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift); + exynos4_mct_comp0_start(mode, cycles_per_jiffy); break; case CLOCK_EVT_MODE_ONESHOT: @@ -248,9 +253,7 @@ static struct irqaction mct_comp_event_irq = { static void exynos4_clockevent_init(void) { - clk_cnt_per_tick = clk_rate / 2 / HZ; - - clockevents_calc_mult_shift(&mct_comp_device, clk_rate / 2, 5); + clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5); mct_comp_device.max_delta_ns = clockevent_delta2ns(0xffffffff, &mct_comp_device); mct_comp_device.min_delta_ns = @@ -258,7 +261,10 @@ static void exynos4_clockevent_init(void) mct_comp_device.cpumask = cpumask_of(0); clockevents_register_device(&mct_comp_device); - setup_irq(IRQ_MCT_G0, &mct_comp_event_irq); + if (soc_is_exynos5250()) + setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq); + else + setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq); } #ifdef CONFIG_LOCAL_TIMERS @@ -314,12 +320,15 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick); + unsigned long cycles_per_jiffy; exynos4_mct_tick_stop(mevt); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - exynos4_mct_tick_start(clk_cnt_per_tick, mevt); + cycles_per_jiffy = + (((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift); + exynos4_mct_tick_start(cycles_per_jiffy, mevt); break; case CLOCK_EVT_MODE_ONESHOT: @@ -375,7 +384,7 @@ static struct irqaction mct_tick1_event_irq = { .handler = exynos4_mct_tick_isr, }; -static void exynos4_mct_tick_init(struct clock_event_device *evt) +static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) { struct mct_clock_event_device *mevt; unsigned int cpu = smp_processor_id(); @@ -393,7 +402,7 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; evt->rating = 450; - clockevents_calc_mult_shift(evt, clk_rate / 2, 5); + clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5); evt->max_delta_ns = clockevent_delta2ns(0x7fffffff, evt); evt->min_delta_ns = @@ -401,33 +410,27 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) clockevents_register_device(evt); - exynos4_mct_write(0x1, mevt->base + MCT_L_TCNTB_OFFSET); + exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET); if (mct_int_type == MCT_INT_SPI) { if (cpu == 0) { mct_tick0_event_irq.dev_id = mevt; - evt->irq = IRQ_MCT_L0; - setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + evt->irq = EXYNOS4_IRQ_MCT_L0; + setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq); } else { mct_tick1_event_irq.dev_id = mevt; - evt->irq = IRQ_MCT_L1; - setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); - irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); + evt->irq = EXYNOS4_IRQ_MCT_L1; + setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq); + irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1)); } } else { - enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0); + enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0); } -} - -/* Setup the local clock events for a CPU */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - exynos4_mct_tick_init(evt); return 0; } -void local_timer_stop(struct clock_event_device *evt) +static void exynos4_local_timer_stop(struct clock_event_device *evt) { unsigned int cpu = smp_processor_id(); evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); @@ -437,8 +440,13 @@ void local_timer_stop(struct clock_event_device *evt) else remove_irq(evt->irq, &mct_tick1_event_irq); else - disable_percpu_irq(IRQ_MCT_LOCALTIMER); + disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER); } + +static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = { + .setup = exynos4_local_timer_setup, + .stop = exynos4_local_timer_stop, +}; #endif /* CONFIG_LOCAL_TIMERS */ static void __init exynos4_timer_resources(void) @@ -452,12 +460,14 @@ static void __init exynos4_timer_resources(void) if (mct_int_type == MCT_INT_PPI) { int err; - err = request_percpu_irq(IRQ_MCT_LOCALTIMER, + err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, exynos4_mct_tick_isr, "MCT", &percpu_mct_tick); WARN(err, "MCT: can't request IRQ %d (%d)\n", - IRQ_MCT_LOCALTIMER, err); + EXYNOS_IRQ_MCT_LOCALTIMER, err); } + + local_timer_register(&exynos4_mct_tick_ops); #endif /* CONFIG_LOCAL_TIMERS */ } diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 0f2035a1eb6e..36c3984aaa47 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -166,7 +166,10 @@ void __init smp_init_cpus(void) void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; - ncores = scu_base ? scu_get_core_count(scu_base) : 1; + if (soc_is_exynos5250()) + ncores = 2; + else + ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ if (ncores > nr_cpu_ids) { @@ -183,8 +186,8 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - - scu_enable(scu_base_addr()); + if (!soc_is_exynos5250()) + scu_enable(scu_base_addr()); /* * Write the address of secondary startup into the diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index e19013051772..428cfeb57724 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -38,29 +38,29 @@ #include <mach/pmu.h> static struct sleep_save exynos4_set_clksrc[] = { - { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, }, - { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, }, - { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, }, - { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, - { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, - { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, }, - { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, - { .reg = S5P_CLKSRC_MASK_PERIL1 , .val = 0x01110111, }, - { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, + { .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, }, + { .reg = EXYNOS4_CLKSRC_MASK_CAM , .val = 0x11111111, }, + { .reg = EXYNOS4_CLKSRC_MASK_TV , .val = 0x00000111, }, + { .reg = EXYNOS4_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, + { .reg = EXYNOS4_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, + { .reg = EXYNOS4_CLKSRC_MASK_FSYS , .val = 0x01011111, }, + { .reg = EXYNOS4_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, + { .reg = EXYNOS4_CLKSRC_MASK_PERIL1 , .val = 0x01110111, }, + { .reg = EXYNOS4_CLKSRC_MASK_DMC , .val = 0x00010000, }, }; static struct sleep_save exynos4210_set_clksrc[] = { - { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, + { .reg = EXYNOS4210_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, }; static struct sleep_save exynos4_epll_save[] = { - SAVE_ITEM(S5P_EPLL_CON0), - SAVE_ITEM(S5P_EPLL_CON1), + SAVE_ITEM(EXYNOS4_EPLL_CON0), + SAVE_ITEM(EXYNOS4_EPLL_CON1), }; static struct sleep_save exynos4_vpll_save[] = { - SAVE_ITEM(S5P_VPLL_CON0), - SAVE_ITEM(S5P_VPLL_CON1), + SAVE_ITEM(EXYNOS4_VPLL_CON0), + SAVE_ITEM(EXYNOS4_VPLL_CON1), }; static struct sleep_save exynos4_core_save[] = { @@ -155,13 +155,6 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_SROM_BC3), }; -static struct sleep_save exynos4_l2cc_save[] = { - SAVE_ITEM(S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL), - SAVE_ITEM(S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL), - SAVE_ITEM(S5P_VA_L2CC + L2X0_PREFETCH_CTRL), - SAVE_ITEM(S5P_VA_L2CC + L2X0_POWER_CTRL), - SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL), -}; /* For Cortex-A9 Diagnostic and Power control register */ static unsigned int save_arm_register[2]; @@ -182,7 +175,6 @@ static void exynos4_pm_prepare(void) u32 tmp; s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); - s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save)); s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save)); @@ -239,7 +231,7 @@ static void exynos4_restore_pll(void) locktime = (3000 / pll_in_rate) * p_div; lockcnt = locktime * 10000 / (10000 / pll_in_rate); - __raw_writel(lockcnt, S5P_EPLL_LOCK); + __raw_writel(lockcnt, EXYNOS4_EPLL_LOCK); s3c_pm_do_restore_core(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save)); @@ -257,7 +249,7 @@ static void exynos4_restore_pll(void) locktime = 750; lockcnt = locktime * 10000 / (10000 / pll_in_rate); - __raw_writel(lockcnt, S5P_VPLL_LOCK); + __raw_writel(lockcnt, EXYNOS4_VPLL_LOCK); s3c_pm_do_restore_core(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save)); @@ -268,14 +260,14 @@ static void exynos4_restore_pll(void) do { if (epll_wait) { - pll_con = __raw_readl(S5P_EPLL_CON0); - if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT)) + pll_con = __raw_readl(EXYNOS4_EPLL_CON0); + if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT)) epll_wait = 0; } if (vpll_wait) { - pll_con = __raw_readl(S5P_VPLL_CON0); - if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT)) + pll_con = __raw_readl(EXYNOS4_VPLL_CON0); + if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT)) vpll_wait = 0; } } while (epll_wait || vpll_wait); @@ -388,13 +380,6 @@ static void exynos4_pm_resume(void) scu_enable(S5P_VA_SCU); #endif -#ifdef CONFIG_CACHE_L2X0 - s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); - outer_inv_all(); - /* enable L2X0*/ - writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL); -#endif - early_wakeup: return; } diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 0b04af2b13cc..13b306808b42 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -183,6 +183,12 @@ static __init int exynos4_pm_init_power_domain(void) #ifdef CONFIG_S5P_DEV_CSIS1 exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam); #endif +#ifdef CONFIG_S5P_DEV_G2D + exynos_pm_add_dev_to_genpd(&s5p_device_g2d, &exynos4_pd_lcd0); +#endif +#ifdef CONFIG_S5P_DEV_JPEG + exynos_pm_add_dev_to_genpd(&s5p_device_jpeg, &exynos4_pd_cam); +#endif return 0; } arch_initcall(exynos4_pm_init_power_domain); diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c index d395bd17c38b..b90d94c17f7c 100644 --- a/arch/arm/mach-exynos/setup-i2c0.c +++ b/arch/arm/mach-exynos/setup-i2c0.c @@ -1,7 +1,5 @@ /* - * linux/arch/arm/mach-exynos4/setup-i2c0.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * I2C0 GPIO configuration. @@ -18,9 +16,14 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> +#include <plat/cpu.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { + if (soc_is_exynos5250()) + /* will be implemented with gpio function */ + return; + s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 41978ee4f9d0..3e6aaa6361da 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -21,6 +21,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/setup.h> +#include <asm/system_misc.h> #include <asm/hardware/dec21285.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 121ad1d4fa39..3b54196447c7 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -14,6 +14,7 @@ #include <asm/hardware/dec21285.h> #include <asm/mach/time.h> +#include <asm/system_info.h> #include "common.h" diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index f685650c25d7..e17e11de4f5e 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -21,7 +21,6 @@ #include <video/vga.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <asm/hardware/dec21285.h> @@ -275,11 +274,13 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) allocate_resource(&iomem_resource, &res[0], 0x40000000, 0x80000000, 0xffffffff, 0x40000000, NULL, NULL); - pci_add_resource(&sys->resources, &ioport_resource); - pci_add_resource(&sys->resources, &res[0]); - pci_add_resource(&sys->resources, &res[1]); sys->mem_offset = DC21285_PCI_MEM; + pci_add_resource_offset(&sys->resources, + &ioport_resource, sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + return 1; } diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c index 4e10090cd87f..5bd266754b95 100644 --- a/arch/arm/mach-footbridge/ebsa285-leds.c +++ b/arch/arm/mach-footbridge/ebsa285-leds.c @@ -24,7 +24,6 @@ #include <mach/hardware.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/system.h> #define LED_STATE_ENABLED 1 #define LED_STATE_CLAIMED 2 diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S index d3847be0c667..dabbd5c54a78 100644 --- a/arch/arm/mach-footbridge/include/mach/entry-macro.S +++ b/arch/arm/mach-footbridge/include/mach/entry-macro.S @@ -14,9 +14,6 @@ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp mov \base, #dc21285_high .if dc21285_low @@ -24,9 +21,6 @@ .endif .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqstat, [\base, #0x180] @ get interrupts diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h deleted file mode 100644 index a174a5841bc2..000000000000 --- a/arch/arm/mach-footbridge/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index 80a1c5cc9071..cac9f67e7da7 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -17,6 +17,7 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/setup.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c index e57102e871fc..5a2bd89cbdca 100644 --- a/arch/arm/mach-footbridge/netwinder-leds.c +++ b/arch/arm/mach-footbridge/netwinder-leds.c @@ -24,7 +24,6 @@ #include <mach/hardware.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/system.h> #define LED_STATE_ENABLED 1 #define LED_STATE_CLAIMED 2 diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index c5b24b95a76e..7355c0bbcb5e 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o mm.o time.o devices.o gpio.o +obj-y := irq.o mm.o time.o devices.o gpio.o idle.o # Board-specific support obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c new file mode 100644 index 000000000000..92bbd6bb600a --- /dev/null +++ b/arch/arm/mach-gemini/idle.c @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-gemini/idle.c + */ + +#include <linux/init.h> +#include <asm/system.h> +#include <asm/proc-fns.h> + +static void gemini_idle(void) +{ + /* + * Because of broken hardware we have to enable interrupts or the CPU + * will never wakeup... Acctualy it is not very good to enable + * interrupts first since scheduler can miss a tick, but there is + * no other way around this. Platforms that needs it for power saving + * should call enable_hlt() in init code, since by default it is + * disabled. + */ + local_irq_enable(); + cpu_do_idle(); +} + +static int __init gemini_idle_init(void) +{ + arm_pm_idle = gemini_idle; + return 0; +} + +arch_initcall(gemini_idle_init); diff --git a/arch/arm/mach-gemini/include/mach/entry-macro.S b/arch/arm/mach-gemini/include/mach/entry-macro.S index 1624f91a2b8b..f044e430bfa4 100644 --- a/arch/arm/mach-gemini/include/mach/entry-macro.S +++ b/arch/arm/mach-gemini/include/mach/entry-macro.S @@ -12,15 +12,9 @@ #define IRQ_STATUS 0x14 - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS) ldr \irqnr, [\irqstat] diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h index 4d9c1f872472..a33b5a1f8ab4 100644 --- a/arch/arm/mach-gemini/include/mach/system.h +++ b/arch/arm/mach-gemini/include/mach/system.h @@ -14,20 +14,6 @@ #include <mach/hardware.h> #include <mach/global_reg.h> -static inline void arch_idle(void) -{ - /* - * Because of broken hardware we have to enable interrupts or the CPU - * will never wakeup... Acctualy it is not very good to enable - * interrupts here since scheduler can miss a tick, but there is - * no other way around this. Platforms that needs it for power saving - * should call enable_hlt() in init code, since by default it is - * disabled. - */ - local_irq_enable(); - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 9485a8fdf851..ca70e5fcc7ac 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -73,8 +73,8 @@ void __init gemini_init_irq(void) unsigned int i, mode = 0, level = 0; /* - * Disable arch_idle() by default since it is buggy - * For more info see arch/arm/mach-gemini/include/mach/system.h + * Disable the idle handler by default since it is buggy + * For more info see arch/arm/mach-gemini/idle.c */ disable_hlt(); diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index f8a2f6bb5483..e756d1ac00c2 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -247,3 +247,21 @@ void h720x_restart(char mode, const char *cmd) { CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; } + +static void h720x__idle(void) +{ + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; + nop(); + nop(); + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; + nop(); + nop(); +} + +static int __init h720x_idle_init(void) +{ + arm_pm_idle = h720x__idle; + return 0; +} + +arch_initcall(h720x_idle_init); diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S index c3948e5ba4a0..75267fad7012 100644 --- a/arch/arm/mach-h720x/include/mach/entry-macro.S +++ b/arch/arm/mach-h720x/include/mach/entry-macro.S @@ -8,15 +8,9 @@ * warranty of any kind, whether express or implied. */ - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp #if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202) @ we could use the id register on H7202, but this is not diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h deleted file mode 100644 index 16ac46e239aa..000000000000 --- a/arch/arm/mach-h720x/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/system.h - * - * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * arch/arm/mach-h720x/include/mach/system.h - * - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include <mach/hardware.h> - -static void arch_idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - -#endif diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index 986958a5a720..f8437dd238c2 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,6 +1,5 @@ obj-y := clock.o highbank.o system.o obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o obj-$(CONFIG_SMP) += platsmp.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_PM_SLEEP) += pm.o diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 8394d512a402..808b055289b2 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -27,6 +27,7 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> +#include <asm/smp_twd.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> #include <asm/hardware/gic.h> @@ -109,8 +110,10 @@ static void __init highbank_timer_init(void) highbank_clocks_init(); - sp804_clocksource_init(timer_base + 0x20, "timer1"); + sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); sp804_clockevents_init(timer_base, irq, "timer0"); + + twd_local_timer_of_register(); } static struct sys_timer highbank_timer = { diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S deleted file mode 100644 index a14f9e62ca92..000000000000 --- a/arch/arm/mach-highbank/include/mach/entry-macro.S +++ /dev/null @@ -1,5 +0,0 @@ - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-highbank/include/mach/memory.h b/arch/arm/mach-highbank/include/mach/memory.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-highbank/include/mach/memory.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-highbank/localtimer.c b/arch/arm/mach-highbank/localtimer.c deleted file mode 100644 index 5a00e7945fdf..000000000000 --- a/arch/arm/mach-highbank/localtimer.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright 2010-2011 Calxeda, Inc. - * Based on localtimer.c, Copyright (C) 2002 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/init.h> -#include <linux/clockchips.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/smp_twd.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "arm,smp-twd"); - if (!twd_base) { - twd_base = of_iomap(np, 0); - WARN_ON(!twd_base); - } - evt->irq = irq_of_parse_and_map(np, 0); - twd_timer_setup(evt); - return 0; -} diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4defb97bbfc8..52359f80c42d 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -46,7 +46,6 @@ config SOC_IMX21 bool select MACH_MX21 select CPU_ARM926T - select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -55,7 +54,6 @@ config SOC_IMX25 bool select ARCH_MX25 select CPU_ARM926T - select ARCH_MXC_AUDMUX_V2 select ARCH_MXC_IOMUX_V3 select MXC_AVIC @@ -63,7 +61,6 @@ config SOC_IMX27 bool select MACH_MX27 select CPU_ARM926T - select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -72,7 +69,6 @@ config SOC_IMX31 bool select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA - select ARCH_MXC_AUDMUX_V2 select MXC_AVIC select SMP_ON_UP if SMP @@ -80,7 +76,6 @@ config SOC_IMX35 bool select CPU_V6 select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP @@ -89,7 +84,6 @@ config SOC_IMX5 select CPU_V7 select MXC_TZIC select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ select ARCH_MX5 bool @@ -304,6 +298,7 @@ config MACH_MX27_3DS select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX @@ -320,8 +315,10 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select LEDS_GPIO_REGISTER help Include support for Visstrim_m10 platform and its different variants. This includes specific configurations for the board and its @@ -376,6 +373,14 @@ config MACH_IMX27IPCAM Include support for IMX27 IPCAM platform. This includes specific configurations for the board and its peripherals. +config MACH_IMX27_DT + bool "Support i.MX27 platforms from device tree" + select SOC_IMX27 + select USE_OF + help + Include support for Freescale i.MX27 based platforms + using the device tree for discovery + endif if ARCH_IMX_V6_V7 @@ -492,6 +497,7 @@ config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select SOC_IMX31 select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 55db9c488f2b..35fc450fa263 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -8,8 +8,8 @@ obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o -obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o -obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o +obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o +obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-imx3.o obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o @@ -41,6 +41,7 @@ obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o +obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o # i.MX31 based machines obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o @@ -71,7 +72,6 @@ obj-$(CONFIG_CPU_V7) += head-v7.o AFLAGS_head-v7.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 6dfdbcc83afd..3851d8a27875 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -38,5 +38,8 @@ zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 +dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb +dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ + imx53-qsb.dtb imx53-smd.dtb dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ imx6q-sabrelite.dtb diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 88fe00a146e3..b9a95ed75553 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/clkdev.h> +#include <linux/of.h> #include <asm/div64.h> @@ -661,7 +662,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "dma", dma_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "brom", brom_clk) - _REGISTER_CLOCK(NULL, "emma", emma_clk) + _REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "emi", emi_clk) @@ -764,3 +765,20 @@ int __init mx27_clocks_init(unsigned long fref) return 0; } +#ifdef CONFIG_OF +int __init mx27_clocks_init_dt(void) +{ + struct device_node *np; + u32 fref = 26000000; /* default */ + + for_each_compatible_node(np, NULL, "fixed-clock") { + if (!of_device_is_compatible(np, "fsl,imx-osc26m")) + continue; + + if (!of_property_read_u32(np, "clock-frequency", &fref)) + break; + } + + return mx27_clocks_init(fref); +} +#endif diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c index 988a28178d4c..3a943cd4159f 100644 --- a/arch/arm/mach-imx/clock-imx31.c +++ b/arch/arm/mach-imx/clock-imx31.c @@ -32,7 +32,7 @@ #include <mach/mx31.h> #include <mach/common.h> -#include "crmregs-imx31.h" +#include "crmregs-imx3.h" #define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */ diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index ac8238caecb9..1e279af656ad 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -27,23 +27,7 @@ #include <mach/hardware.h> #include <mach/common.h> -#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR) - -#define CCM_CCMR 0x00 -#define CCM_PDR0 0x04 -#define CCM_PDR1 0x08 -#define CCM_PDR2 0x0C -#define CCM_PDR3 0x10 -#define CCM_PDR4 0x14 -#define CCM_RCSR 0x18 -#define CCM_MPCTL 0x1C -#define CCM_PPCTL 0x20 -#define CCM_ACMR 0x24 -#define CCM_COSR 0x28 -#define CCM_CGR0 0x2C -#define CCM_CGR1 0x30 -#define CCM_CGR2 0x34 -#define CCM_CGR3 0x38 +#include "crmregs-imx3.h" #ifdef HAVE_SET_RATE_SUPPORT static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost) @@ -111,14 +95,14 @@ static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post) static unsigned long get_rate_mpll(void) { - ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL); + ulong mpctl = __raw_readl(MX35_CCM_MPCTL); return mxc_decode_pll(mpctl, 24000000); } static unsigned long get_rate_ppll(void) { - ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL); + ulong ppctl = __raw_readl(MX35_CCM_PPCTL); return mxc_decode_pll(ppctl, 24000000); } @@ -148,7 +132,7 @@ static struct arm_ahb_div clk_consumer[] = { static unsigned long get_rate_arm(void) { - unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); + unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0); struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); @@ -161,7 +145,7 @@ static unsigned long get_rate_arm(void) static unsigned long get_rate_ahb(struct clk *clk) { - unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); + unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0); struct arm_ahb_div *aad; unsigned long fref = get_rate_arm(); @@ -177,8 +161,8 @@ static unsigned long get_rate_ipg(struct clk *clk) static unsigned long get_rate_uart(struct clk *clk) { - unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); - unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); + unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3); + unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4); unsigned long div = ((pdr4 >> 10) & 0x3f) + 1; if (pdr3 & (1 << 14)) @@ -189,7 +173,7 @@ static unsigned long get_rate_uart(struct clk *clk) static unsigned long get_rate_sdhc(struct clk *clk) { - unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); + unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3); unsigned long div, rate; if (pdr3 & (1 << 6)) @@ -215,7 +199,7 @@ static unsigned long get_rate_sdhc(struct clk *clk) static unsigned long get_rate_mshc(struct clk *clk) { - unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1); + unsigned long pdr1 = __raw_readl(MXC_CCM_PDR1); unsigned long div1, div2, rate; if (pdr1 & (1 << 7)) @@ -231,7 +215,7 @@ static unsigned long get_rate_mshc(struct clk *clk) static unsigned long get_rate_ssi(struct clk *clk) { - unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2); + unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2); unsigned long div1, div2, rate; if (pdr2 & (1 << 6)) @@ -256,7 +240,7 @@ static unsigned long get_rate_ssi(struct clk *clk) static unsigned long get_rate_csi(struct clk *clk) { - unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2); + unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2); unsigned long rate; if (pdr2 & (1 << 7)) @@ -269,7 +253,7 @@ static unsigned long get_rate_csi(struct clk *clk) static unsigned long get_rate_otg(struct clk *clk) { - unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); + unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4); unsigned long rate; if (pdr4 & (1 << 9)) @@ -282,8 +266,8 @@ static unsigned long get_rate_otg(struct clk *clk) static unsigned long get_rate_ipg_per(struct clk *clk) { - unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); - unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); + unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0); + unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4); unsigned long div; if (pdr0 & (1 << 26)) { @@ -297,7 +281,7 @@ static unsigned long get_rate_ipg_per(struct clk *clk) static unsigned long get_rate_hsp(struct clk *clk) { - unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03; + unsigned long hsp_podf = (__raw_readl(MXC_CCM_PDR0) >> 20) & 0x03; unsigned long fref = get_rate_mpll(); if (fref > 400 * 1000 * 1000) { @@ -345,7 +329,7 @@ static void clk_cgr_disable(struct clk *clk) #define DEFINE_CLOCK(name, i, er, es, gr, sr) \ static struct clk name = { \ .id = i, \ - .enable_reg = CCM_BASE + er, \ + .enable_reg = er, \ .enable_shift = es, \ .get_rate = gr, \ .set_rate = sr, \ @@ -353,59 +337,59 @@ static void clk_cgr_disable(struct clk *clk) .disable = clk_cgr_disable, \ } -DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL); -DEFINE_CLOCK(pata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL); -/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); */ -DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL); -DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi1_clk, 0, CCM_CGR0, 10, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi2_clk, 1, CCM_CGR0, 12, get_rate_ipg, NULL); -DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL); -DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL); -DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL); -DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg, NULL); -DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg, NULL); -DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL); -DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL); -DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL); -DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL); - -DEFINE_CLOCK(fec_clk, 0, CCM_CGR1, 0, get_rate_ipg, NULL); -DEFINE_CLOCK(gpio1_clk, 0, CCM_CGR1, 2, NULL, NULL); -DEFINE_CLOCK(gpio2_clk, 1, CCM_CGR1, 4, NULL, NULL); -DEFINE_CLOCK(gpio3_clk, 2, CCM_CGR1, 6, NULL, NULL); -DEFINE_CLOCK(gpt_clk, 0, CCM_CGR1, 8, get_rate_ipg, NULL); -DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL); -DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL); -DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL); -DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL); -DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_hsp, NULL); -DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL); -DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL); -DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL); -DEFINE_CLOCK(owire_clk, 0, CCM_CGR1, 26, get_rate_ipg_per, NULL); -DEFINE_CLOCK(pwm_clk, 0, CCM_CGR1, 28, get_rate_ipg_per, NULL); -DEFINE_CLOCK(rngc_clk, 0, CCM_CGR1, 30, get_rate_ipg, NULL); - -DEFINE_CLOCK(rtc_clk, 0, CCM_CGR2, 0, get_rate_ipg, NULL); -DEFINE_CLOCK(rtic_clk, 0, CCM_CGR2, 2, get_rate_ahb, NULL); -DEFINE_CLOCK(scc_clk, 0, CCM_CGR2, 4, get_rate_ipg, NULL); -DEFINE_CLOCK(sdma_clk, 0, CCM_CGR2, 6, NULL, NULL); -DEFINE_CLOCK(spba_clk, 0, CCM_CGR2, 8, get_rate_ipg, NULL); -DEFINE_CLOCK(spdif_clk, 0, CCM_CGR2, 10, NULL, NULL); -DEFINE_CLOCK(ssi1_clk, 0, CCM_CGR2, 12, get_rate_ssi, NULL); -DEFINE_CLOCK(ssi2_clk, 1, CCM_CGR2, 14, get_rate_ssi, NULL); -DEFINE_CLOCK(uart1_clk, 0, CCM_CGR2, 16, get_rate_uart, NULL); -DEFINE_CLOCK(uart2_clk, 1, CCM_CGR2, 18, get_rate_uart, NULL); -DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL); -DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL); -DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL); -DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL); -DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL); - -DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL); -DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL); -DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); +DEFINE_CLOCK(asrc_clk, 0, MX35_CCM_CGR0, 0, NULL, NULL); +DEFINE_CLOCK(pata_clk, 0, MX35_CCM_CGR0, 2, get_rate_ipg, NULL); +/* DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR0, 4, NULL, NULL); */ +DEFINE_CLOCK(can1_clk, 0, MX35_CCM_CGR0, 6, get_rate_ipg, NULL); +DEFINE_CLOCK(can2_clk, 1, MX35_CCM_CGR0, 8, get_rate_ipg, NULL); +DEFINE_CLOCK(cspi1_clk, 0, MX35_CCM_CGR0, 10, get_rate_ipg, NULL); +DEFINE_CLOCK(cspi2_clk, 1, MX35_CCM_CGR0, 12, get_rate_ipg, NULL); +DEFINE_CLOCK(ect_clk, 0, MX35_CCM_CGR0, 14, get_rate_ipg, NULL); +DEFINE_CLOCK(edio_clk, 0, MX35_CCM_CGR0, 16, NULL, NULL); +DEFINE_CLOCK(emi_clk, 0, MX35_CCM_CGR0, 18, get_rate_ipg, NULL); +DEFINE_CLOCK(epit1_clk, 0, MX35_CCM_CGR0, 20, get_rate_ipg, NULL); +DEFINE_CLOCK(epit2_clk, 1, MX35_CCM_CGR0, 22, get_rate_ipg, NULL); +DEFINE_CLOCK(esai_clk, 0, MX35_CCM_CGR0, 24, NULL, NULL); +DEFINE_CLOCK(esdhc1_clk, 0, MX35_CCM_CGR0, 26, get_rate_sdhc, NULL); +DEFINE_CLOCK(esdhc2_clk, 1, MX35_CCM_CGR0, 28, get_rate_sdhc, NULL); +DEFINE_CLOCK(esdhc3_clk, 2, MX35_CCM_CGR0, 30, get_rate_sdhc, NULL); + +DEFINE_CLOCK(fec_clk, 0, MX35_CCM_CGR1, 0, get_rate_ipg, NULL); +DEFINE_CLOCK(gpio1_clk, 0, MX35_CCM_CGR1, 2, NULL, NULL); +DEFINE_CLOCK(gpio2_clk, 1, MX35_CCM_CGR1, 4, NULL, NULL); +DEFINE_CLOCK(gpio3_clk, 2, MX35_CCM_CGR1, 6, NULL, NULL); +DEFINE_CLOCK(gpt_clk, 0, MX35_CCM_CGR1, 8, get_rate_ipg, NULL); +DEFINE_CLOCK(i2c1_clk, 0, MX35_CCM_CGR1, 10, get_rate_ipg_per, NULL); +DEFINE_CLOCK(i2c2_clk, 1, MX35_CCM_CGR1, 12, get_rate_ipg_per, NULL); +DEFINE_CLOCK(i2c3_clk, 2, MX35_CCM_CGR1, 14, get_rate_ipg_per, NULL); +DEFINE_CLOCK(iomuxc_clk, 0, MX35_CCM_CGR1, 16, NULL, NULL); +DEFINE_CLOCK(ipu_clk, 0, MX35_CCM_CGR1, 18, get_rate_hsp, NULL); +DEFINE_CLOCK(kpp_clk, 0, MX35_CCM_CGR1, 20, get_rate_ipg, NULL); +DEFINE_CLOCK(mlb_clk, 0, MX35_CCM_CGR1, 22, get_rate_ahb, NULL); +DEFINE_CLOCK(mshc_clk, 0, MX35_CCM_CGR1, 24, get_rate_mshc, NULL); +DEFINE_CLOCK(owire_clk, 0, MX35_CCM_CGR1, 26, get_rate_ipg_per, NULL); +DEFINE_CLOCK(pwm_clk, 0, MX35_CCM_CGR1, 28, get_rate_ipg_per, NULL); +DEFINE_CLOCK(rngc_clk, 0, MX35_CCM_CGR1, 30, get_rate_ipg, NULL); + +DEFINE_CLOCK(rtc_clk, 0, MX35_CCM_CGR2, 0, get_rate_ipg, NULL); +DEFINE_CLOCK(rtic_clk, 0, MX35_CCM_CGR2, 2, get_rate_ahb, NULL); +DEFINE_CLOCK(scc_clk, 0, MX35_CCM_CGR2, 4, get_rate_ipg, NULL); +DEFINE_CLOCK(sdma_clk, 0, MX35_CCM_CGR2, 6, NULL, NULL); +DEFINE_CLOCK(spba_clk, 0, MX35_CCM_CGR2, 8, get_rate_ipg, NULL); +DEFINE_CLOCK(spdif_clk, 0, MX35_CCM_CGR2, 10, NULL, NULL); +DEFINE_CLOCK(ssi1_clk, 0, MX35_CCM_CGR2, 12, get_rate_ssi, NULL); +DEFINE_CLOCK(ssi2_clk, 1, MX35_CCM_CGR2, 14, get_rate_ssi, NULL); +DEFINE_CLOCK(uart1_clk, 0, MX35_CCM_CGR2, 16, get_rate_uart, NULL); +DEFINE_CLOCK(uart2_clk, 1, MX35_CCM_CGR2, 18, get_rate_uart, NULL); +DEFINE_CLOCK(uart3_clk, 2, MX35_CCM_CGR2, 20, get_rate_uart, NULL); +DEFINE_CLOCK(usbotg_clk, 0, MX35_CCM_CGR2, 22, get_rate_otg, NULL); +DEFINE_CLOCK(wdog_clk, 0, MX35_CCM_CGR2, 24, NULL, NULL); +DEFINE_CLOCK(max_clk, 0, MX35_CCM_CGR2, 26, NULL, NULL); +DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR2, 30, NULL, NULL); + +DEFINE_CLOCK(csi_clk, 0, MX35_CCM_CGR3, 0, get_rate_csi, NULL); +DEFINE_CLOCK(iim_clk, 0, MX35_CCM_CGR3, 2, NULL, NULL); +DEFINE_CLOCK(gpu2d_clk, 0, MX35_CCM_CGR3, 4, NULL, NULL); DEFINE_CLOCK(usbahb_clk, 0, 0, 0, get_rate_ahb, NULL); @@ -422,7 +406,7 @@ static unsigned long get_rate_nfc(struct clk *clk) { unsigned long div1; - div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1; + div1 = (__raw_readl(MX35_CCM_PDR4) >> 28) + 1; return get_rate_ahb(NULL) / div1; } @@ -518,11 +502,11 @@ int __init mx35_clocks_init() /* Turn off all clocks except the ones we need to survive, namely: * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart */ - __raw_writel((3 << 18), CCM_BASE + CCM_CGR0); + __raw_writel((3 << 18), MX35_CCM_CGR0); __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16), - CCM_BASE + CCM_CGR1); - __raw_writel(cgr2, CCM_BASE + CCM_CGR2); - __raw_writel(0, CCM_BASE + CCM_CGR3); + MX35_CCM_CGR1); + __raw_writel(cgr2, MX35_CCM_CGR2); + __raw_writel(0, MX35_CCM_CGR3); clk_enable(&iim_clk); imx_print_silicon_rev("i.MX35", mx35_revision()); @@ -533,7 +517,7 @@ int __init mx35_clocks_init() * extra clocks turned on, otherwise the MX35 boot ROM code will * hang after a watchdog reset. */ - if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) { + if (!(__raw_readl(MX35_CCM_RCSR) & (3 << 10))) { /* Additionally turn on UART1, SCC, and IIM clocks */ clk_enable(&iim_clk); clk_enable(&uart1_clk); diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 2d88f8b9a454..111c328f5420 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -329,6 +329,12 @@ #define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) #define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) +#define BP_CCOSR_CKO1_EN 7 +#define BP_CCOSR_CKO1_PODF 4 +#define BM_CCOSR_CKO1_PODF (0x7 << 4) +#define BP_CCOSR_CKO1_SEL 0 +#define BM_CCOSR_CKO1_SEL (0xf << 0) + #define FREQ_480M 480000000 #define FREQ_528M 528000000 #define FREQ_594M 594000000 @@ -393,6 +399,7 @@ static struct clk ipu1_di1_clk; static struct clk ipu2_di0_clk; static struct clk ipu2_di1_clk; static struct clk enfc_clk; +static struct clk cko1_clk; static struct clk dummy_clk = {}; static unsigned long external_high_reference; @@ -938,6 +945,24 @@ static void _clk_disable(struct clk *clk) writel_relaxed(reg, clk->enable_reg); } +static int _clk_enable_1b(struct clk *clk) +{ + u32 reg; + reg = readl_relaxed(clk->enable_reg); + reg |= 0x1 << clk->enable_shift; + writel_relaxed(reg, clk->enable_reg); + + return 0; +} + +static void _clk_disable_1b(struct clk *clk) +{ + u32 reg; + reg = readl_relaxed(clk->enable_reg); + reg &= ~(0x1 << clk->enable_shift); + writel_relaxed(reg, clk->enable_reg); +} + struct divider { struct clk *clk; void __iomem *reg; @@ -983,6 +1008,7 @@ DEF_CLK_DIV1(ipu2_di0_pre_div, &ipu2_di0_pre_clk, CSCDR2, IPU2_DI0_PRE); DEF_CLK_DIV1(ipu2_di1_pre_div, &ipu2_di1_pre_clk, CSCDR2, IPU2_DI1_PRE); DEF_CLK_DIV1(ipu1_div, &ipu1_clk, CSCDR3, IPU1_HSP); DEF_CLK_DIV1(ipu2_div, &ipu2_clk, CSCDR3, IPU2_HSP); +DEF_CLK_DIV1(cko1_div, &cko1_clk, CCOSR, CKO1); #define DEF_CLK_DIV2(d, c, r, b) \ static struct divider d = { \ @@ -1038,6 +1064,7 @@ static struct divider *dividers[] = { &enfc_div, &spdif_div, &asrc_serial_div, + &cko1_div, }; static unsigned long ldb_di_clk_get_rate(struct clk *clk) @@ -1625,6 +1652,32 @@ DEF_IPU_DI_MUX(CSCDR2, 2, 1); DEF_IPU_MUX(1); DEF_IPU_MUX(2); +static struct multiplexer cko1_mux = { + .clk = &cko1_clk, + .reg = CCOSR, + .bp = BP_CCOSR_CKO1_SEL, + .bm = BM_CCOSR_CKO1_SEL, + .parents = { + &pll3_usb_otg, + &pll2_bus, + &pll1_sys, + &pll5_video, + &dummy_clk, + &axi_clk, + &enfc_clk, + &ipu1_di0_clk, + &ipu1_di1_clk, + &ipu2_di0_clk, + &ipu2_di1_clk, + &ahb_clk, + &ipg_clk, + &ipg_perclk, + &ckil_clk, + &pll4_audio, + NULL + }, +}; + static struct multiplexer *multiplexers[] = { &axi_mux, &periph_mux, @@ -1667,6 +1720,7 @@ static struct multiplexer *multiplexers[] = { &ipu2_di1_mux, &ipu1_mux, &ipu2_mux, + &cko1_mux, }; static int _clk_set_parent(struct clk *clk, struct clk *parent) @@ -1690,7 +1744,7 @@ static int _clk_set_parent(struct clk *clk, struct clk *parent) break; i++; } - if (!m->parents[i]) + if (!m->parents[i] || m->parents[i] == &dummy_clk) return -EINVAL; val = readl_relaxed(m->reg); @@ -1745,6 +1799,20 @@ DEF_NG_CLK(asrc_serial_clk, &pll3_usb_otg); .secondary = s, \ } +#define DEF_CLK_1B(name, er, es, p, s) \ + static struct clk name = { \ + .enable_reg = er, \ + .enable_shift = es, \ + .enable = _clk_enable_1b, \ + .disable = _clk_disable_1b, \ + .get_rate = _clk_get_rate, \ + .set_rate = _clk_set_rate, \ + .round_rate = _clk_round_rate, \ + .set_parent = _clk_set_parent, \ + .parent = p, \ + .secondary = s, \ + } + DEF_CLK(aips_tz1_clk, CCGR0, CG0, &ahb_clk, NULL); DEF_CLK(aips_tz2_clk, CCGR0, CG1, &ahb_clk, NULL); DEF_CLK(apbh_dma_clk, CCGR0, CG2, &ahb_clk, NULL); @@ -1811,6 +1879,7 @@ DEF_CLK(usdhc4_clk, CCGR6, CG4, &pll2_pfd_400m, NULL); DEF_CLK(emi_slow_clk, CCGR6, CG5, &axi_clk, NULL); DEF_CLK(vdo_axi_clk, CCGR6, CG6, &axi_clk, NULL); DEF_CLK(vpu_clk, CCGR6, CG7, &axi_clk, NULL); +DEF_CLK_1B(cko1_clk, CCOSR, BP_CCOSR_CKO1_EN, &pll2_bus, NULL); static int pcie_clk_enable(struct clk *clk) { @@ -1922,6 +1991,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk), _REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk), _REGISTER_CLOCK(NULL, "sata_clk", sata_clk), + _REGISTER_CLOCK(NULL, "cko1_clk", cko1_clk), }; int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) @@ -2029,6 +2099,8 @@ int __init mx6q_clocks_init(void) clk_set_rate(&usdhc3_clk, 49500000); clk_set_rate(&usdhc4_clk, 49500000); + clk_set_parent(&cko1_clk, &ahb_clk); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index 5e2e7a843860..aa15c517d06e 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -149,39 +149,3 @@ int mx50_revision(void) return mx5_cpu_rev; } EXPORT_SYMBOL(mx50_revision); - -static int __init post_cpu_init(void) -{ - unsigned int reg; - void __iomem *base; - - if (cpu_is_mx51() || cpu_is_mx53()) { - if (cpu_is_mx51()) - base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR); - else - base = MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR); - - __raw_writel(0x0, base + 0x40); - __raw_writel(0x0, base + 0x44); - __raw_writel(0x0, base + 0x48); - __raw_writel(0x0, base + 0x4C); - reg = __raw_readl(base + 0x50) & 0x00FFFFFF; - __raw_writel(reg, base + 0x50); - - if (cpu_is_mx51()) - base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR); - else - base = MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR); - - __raw_writel(0x0, base + 0x40); - __raw_writel(0x0, base + 0x44); - __raw_writel(0x0, base + 0x48); - __raw_writel(0x0, base + 0x4C); - reg = __raw_readl(base + 0x50) & 0x00FFFFFF; - __raw_writel(reg, base + 0x50); - } - - return 0; -} - -postcore_initcall(post_cpu_init); diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c index 9d34c3d4c024..7b92cd6da6d3 100644 --- a/arch/arm/mach-imx/cpu_op-mx51.c +++ b/arch/arm/mach-imx/cpu_op-mx51.c @@ -11,6 +11,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/bug.h> #include <linux/types.h> #include <mach/hardware.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-imx/crmregs-imx31.h b/arch/arm/mach-imx/crmregs-imx3.h index 37a8a07beda3..53141273df45 100644 --- a/arch/arm/mach-imx/crmregs-imx31.h +++ b/arch/arm/mach-imx/crmregs-imx3.h @@ -24,23 +24,36 @@ #define CKIH_CLK_FREQ_27MHZ 27000000 #define CKIL_CLK_FREQ 32768 -#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) +#define MXC_CCM_BASE (cpu_is_mx31() ? \ +MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) : MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)) /* Register addresses */ #define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00) #define MXC_CCM_PDR0 (MXC_CCM_BASE + 0x04) #define MXC_CCM_PDR1 (MXC_CCM_BASE + 0x08) +#define MX35_CCM_PDR2 (MXC_CCM_BASE + 0x0C) #define MXC_CCM_RCSR (MXC_CCM_BASE + 0x0C) +#define MX35_CCM_PDR3 (MXC_CCM_BASE + 0x10) #define MXC_CCM_MPCTL (MXC_CCM_BASE + 0x10) +#define MX35_CCM_PDR4 (MXC_CCM_BASE + 0x14) #define MXC_CCM_UPCTL (MXC_CCM_BASE + 0x14) +#define MX35_CCM_RCSR (MXC_CCM_BASE + 0x18) #define MXC_CCM_SRPCTL (MXC_CCM_BASE + 0x18) +#define MX35_CCM_MPCTL (MXC_CCM_BASE + 0x1C) #define MXC_CCM_COSR (MXC_CCM_BASE + 0x1C) +#define MX35_CCM_PPCTL (MXC_CCM_BASE + 0x20) #define MXC_CCM_CGR0 (MXC_CCM_BASE + 0x20) +#define MX35_CCM_ACMR (MXC_CCM_BASE + 0x24) #define MXC_CCM_CGR1 (MXC_CCM_BASE + 0x24) +#define MX35_CCM_COSR (MXC_CCM_BASE + 0x28) #define MXC_CCM_CGR2 (MXC_CCM_BASE + 0x28) +#define MX35_CCM_CGR0 (MXC_CCM_BASE + 0x2C) #define MXC_CCM_WIMR (MXC_CCM_BASE + 0x2C) +#define MX35_CCM_CGR1 (MXC_CCM_BASE + 0x30) #define MXC_CCM_LDC (MXC_CCM_BASE + 0x30) +#define MX35_CCM_CGR2 (MXC_CCM_BASE + 0x34) #define MXC_CCM_DCVR0 (MXC_CCM_BASE + 0x34) +#define MX35_CCM_CGR3 (MXC_CCM_BASE + 0x38) #define MXC_CCM_DCVR1 (MXC_CCM_BASE + 0x38) #define MXC_CCM_DCVR2 (MXC_CCM_BASE + 0x3C) #define MXC_CCM_DCVR3 (MXC_CCM_BASE + 0x40) @@ -64,6 +77,7 @@ #define MXC_CCM_CCMR_SSI2S_MASK (0x3 << 21) #define MXC_CCM_CCMR_LPM_OFFSET 14 #define MXC_CCM_CCMR_LPM_MASK (0x3 << 14) +#define MXC_CCM_CCMR_LPM_WAIT_MX35 (0x1 << 14) #define MXC_CCM_CCMR_FIRS_OFFSET 11 #define MXC_CCM_CCMR_FIRS_MASK (0x3 << 11) #define MXC_CCM_CCMR_UPE (1 << 9) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 2f727d7c380c..28537a5d9048 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -50,6 +50,8 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) +#define imx27_add_mx2_emmaprp(pdata) \ + imx_add_mx2_emmaprp(&imx27_mx2_camera_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; #define imx27_add_mxc_ehci_otg(pdata) \ diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c index 42afc29a7da8..3189a6004cf9 100644 --- a/arch/arm/mach-imx/dma-v1.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -32,7 +32,6 @@ #include <linux/scatterlist.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/irq.h> #include <mach/hardware.h> #include <mach/dma-v1.h> diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 5db3e1463af7..5f2f91d1798b 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -32,7 +32,6 @@ #include <mach/common.h> #include <mach/iomux-mx27.h> #include <mach/hardware.h> -#include <mach/audmux.h> #include "devices-imx27.h" @@ -306,25 +305,6 @@ void __init eukrea_mbimx27_baseboard_init(void) mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ - || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) - /* SSI unit master I2S codec connected to SSI_PINS_4*/ - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, - MXC_AUDMUX_V1_PCR_SYN | - MXC_AUDMUX_V1_PCR_TFSDIR | - MXC_AUDMUX_V1_PCR_TCLKDIR | - MXC_AUDMUX_V1_PCR_RFSDIR | - MXC_AUDMUX_V1_PCR_RCLKDIR | - MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | - MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | - MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) - ); - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4, - MXC_AUDMUX_V1_PCR_SYN | - MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0) - ); -#endif - imx27_add_imx_uart1(&uart_pdata); imx27_add_imx_uart2(&uart_pdata); #if !defined(MACH_EUKREA_CPUIMX27_USEUART4) diff --git a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c index d817fc80b986..aaa592fdb9ce 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c @@ -37,7 +37,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx51.h> -#include <mach/audmux.h> #include "devices-imx51.h" diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index 66e8726253fa..2cf603e11c4f 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -31,7 +31,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/mx25.h> -#include <mach/audmux.h> #include "devices-imx25.h" @@ -241,22 +240,6 @@ void __init eukrea_mbimxsd25_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_pads))) printk(KERN_ERR "error setting mbimxsd pads !\n"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) - /* SSI unit master I2S codec connected to SSI_AUD5*/ - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | - MXC_AUDMUX_V2_PTCR_TFSDIR | - MXC_AUDMUX_V2_PTCR_TFSEL(4) | - MXC_AUDMUX_V2_PTCR_TCLKDIR | - MXC_AUDMUX_V2_PTCR_TCSEL(4), - MXC_AUDMUX_V2_PDCR_RXDSEL(4) - ); - mxc_audmux_v2_configure_port(4, - MXC_AUDMUX_V2_PTCR_SYN, - MXC_AUDMUX_V2_PDCR_RXDSEL(0) - ); -#endif - imx25_add_imx_uart1(&uart_pdata); imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata); imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 0f0af02b3182..fd8bf8a425a7 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -38,7 +38,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> -#include <mach/audmux.h> #include "devices-imx35.h" @@ -252,22 +251,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_pads))) printk(KERN_ERR "error setting mbimxsd pads !\n"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) - /* SSI unit master I2S codec connected to SSI_AUD4 */ - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | - MXC_AUDMUX_V2_PTCR_TFSDIR | - MXC_AUDMUX_V2_PTCR_TFSEL(3) | - MXC_AUDMUX_V2_PTCR_TCLKDIR | - MXC_AUDMUX_V2_PTCR_TCSEL(3), - MXC_AUDMUX_V2_PDCR_RXDSEL(3) - ); - mxc_audmux_v2_configure_port(3, - MXC_AUDMUX_V2_PTCR_SYN, - MXC_AUDMUX_V2_PDCR_RXDSEL(0) - ); -#endif - imx35_add_imx_uart1(&uart_pdata); imx35_add_ipu_core(&mx3_ipu_data); imx35_add_mx3_sdc_fb(&mx3fb_pdata); diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c new file mode 100644 index 000000000000..861ceb8232d6 --- /dev/null +++ b/arch/arm/mach-imx/imx27-dt.c @@ -0,0 +1,89 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> +#include <mach/mx27.h> + +static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL), + OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL), + OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx-i2c.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx-i2c.1", NULL), + OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL), + OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL), + OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL), + { /* sentinel */ } +}; + +static int __init imx27_avic_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + irq_domain_add_simple(np, 0); + return 0; +} + +static int __init imx27_gpio_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + + irq_domain_add_simple(np, gpio_irq_base); + + return 0; +} + +static const struct of_device_id imx27_irq_match[] __initconst = { + { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, }, + { .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, }, + { /* sentinel */ } +}; + +static void __init imx27_dt_init(void) +{ + of_irq_init(imx27_irq_match); + + of_platform_populate(NULL, of_default_bus_match_table, + imx27_auxdata_lookup, NULL); +} + +static void __init imx27_timer_init(void) +{ + mx27_clocks_init_dt(); +} + +static struct sys_timer imx27_timer = { + .init = imx27_timer_init, +}; + +static const char *imx27_dt_board_compat[] __initdata = { + "fsl,imx27", + NULL +}; + +DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, + .timer = &imx27_timer, + .init_machine = imx27_dt_init, + .dt_compat = imx27_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 1e03ef42faa0..5cca573964f0 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -104,6 +104,7 @@ static struct sys_timer imx51_timer = { static const char *imx51_dt_board_compat[] __initdata = { "fsl,imx51-babbage", + "fsl,imx51", NULL }; diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index fd5be0f20fbb..4172279b3900 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -114,6 +114,7 @@ static const char *imx53_dt_board_compat[] __initdata = { "fsl,imx53-evk", "fsl,imx53-qsb", "fsl,imx53-smd", + "fsl,imx53", NULL }; diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c index d4ab6f29a766..0213f8dcee81 100644 --- a/arch/arm/mach-imx/lluart.c +++ b/arch/arm/mach-imx/lluart.c @@ -17,7 +17,7 @@ #include <mach/hardware.h> static struct map_desc imx_lluart_desc = { -#ifdef CONFIG_DEBUG_IMX6Q_UART +#ifdef CONFIG_DEBUG_IMX6Q_UART4 .virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR), .pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR), .length = MX6Q_UART4_SIZE, diff --git a/arch/arm/mach-imx/localtimer.c b/arch/arm/mach-imx/localtimer.c deleted file mode 100644 index 3a163515d41f..000000000000 --- a/arch/arm/mach-imx/localtimer.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/clockchips.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <asm/smp_twd.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "arm,smp-twd"); - if (!twd_base) { - twd_base = of_iomap(np, 0); - WARN_ON(!twd_base); - } - evt->irq = irq_of_parse_and_map(np, 0); - twd_timer_setup(evt); - - return 0; -} diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index e4f426a09899..27bc27e6ea41 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -51,7 +51,7 @@ #include <mach/ulpi.h> #include "devices-imx31.h" -#include "crmregs-imx31.h" +#include "crmregs-imx3.h" static int armadillo5x0_pins[] = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index c2766ae02b4f..f7b074f496f0 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,6 +30,10 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/leds.h> +#include <linux/memblock.h> +#include <media/soc_camera.h> #include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +43,8 @@ #include "devices-imx27.h" +#define TVP5150_RSTN (GPIO_PORTC + 18) +#define TVP5150_PWDN (GPIO_PORTC + 19) #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ IRQ_GPIOB(25) @@ -100,8 +106,99 @@ static const int visstrim_m10_pins[] __initconst = { PE1_PF_USBOTG_STP, PB23_PF_USB_PWR, PB24_PF_USB_OC, + /* CSI */ + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, }; +/* Camera */ +static int visstrim_camera_power(struct device *dev, int on) +{ + gpio_set_value(TVP5150_PWDN, on); + + return 0; +}; + +static int visstrim_camera_reset(struct device *dev) +{ + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + + return 0; +}; + +static struct i2c_board_info visstrim_i2c_camera = { + I2C_BOARD_INFO("tvp5150", 0x5d), +}; + +static struct soc_camera_link iclink_tvp5150 = { + .bus_id = 0, + .board_info = &visstrim_i2c_camera, + .i2c_adapter_id = 0, + .power = visstrim_camera_power, + .reset = visstrim_camera_reset, +}; + +static struct mx2_camera_platform_data visstrim_camera = { + .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | + MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING, + .clk = 100000, +}; + +static phys_addr_t mx2_camera_base __initdata; +#define MX2_CAMERA_BUF_SIZE SZ_8M + +static void __init visstrim_camera_init(void) +{ + struct platform_device *pdev; + int dma; + + /* Initialize tvp5150 gpios */ + mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT); + gpio_set_value(TVP5150_RSTN, 1); + gpio_set_value(TVP5150_PWDN, 0); + ndelay(1); + + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + ndelay(200000); + + pdev = imx27_add_mx2_camera(&visstrim_camera); + if (IS_ERR(pdev)) + return; + + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base, mx2_camera_base, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + return; +} + +static void __init visstrim_reserve(void) +{ + /* reserve 4 MiB for mx2-camera */ + mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE); + memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE); + memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE); +} + /* GPIOs used as events for applications */ static struct gpio_keys_button visstrim_gpio_keys[] = { { @@ -136,6 +233,35 @@ static const struct gpio_keys_platform_data .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), }; +/* led */ +static const struct gpio_led visstrim_m10_leds[] __initconst = { + { + .name = "visstrim:ld0", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 29), + }, + { + .name = "visstrim:ld1", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 24), + }, + { + .name = "visstrim:ld2", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 28), + }, + { + .name = "visstrim:ld3", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 25), + }, +}; + +static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = { + .leds = visstrim_m10_leds, + .num_leds = ARRAY_SIZE(visstrim_m10_leds), +}; + /* Visstrim_SM10 has a microSD slot connected to sdhc1 */ static int visstrim_m10_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) @@ -216,6 +342,9 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("tlv320aic32x4", 0x18), .platform_data = &visstrim_m10_aic32x4_pdata, + }, + { + I2C_BOARD_INFO("m41t00", 0x68), } }; @@ -254,15 +383,21 @@ static void __init visstrim_m10_board_init(void) imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); - i2c_register_board_info(0, visstrim_m10_i2c_devices, - ARRAY_SIZE(visstrim_m10_i2c_devices)); imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); + i2c_register_board_info(0, visstrim_m10_i2c_devices, + ARRAY_SIZE(visstrim_m10_i2c_devices)); + imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); imx27_add_fec(NULL); imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0); + platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, + &iclink_tvp5150, sizeof(iclink_tvp5150)); + gpio_led_register_device(0, &visstrim_m10_led_data); + visstrim_camera_init(); } static void __init visstrim_m10_timer_init(void) @@ -276,6 +411,7 @@ static struct sys_timer visstrim_m10_timer = { MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .atag_offset = 0x100, + .reserve = visstrim_reserve, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 6075d4d62dd6..da6c1d9af768 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -21,10 +21,12 @@ #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/micrel_phy.h> +#include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include <asm/system_misc.h> #include <mach/common.h> #include <mach/hardware.h> @@ -120,6 +122,7 @@ static void __init imx6q_init_irq(void) static void __init imx6q_timer_init(void) { mx6q_clocks_init(); + twd_local_timer_of_register(); } static struct sys_timer imx6q_timer = { @@ -129,6 +132,7 @@ static struct sys_timer imx6q_timer = { static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6q-arm2", "fsl,imx6q-sabrelite", + "fsl,imx6q", NULL, }; diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 8d9f95514b1f..e432d4acee1f 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -37,8 +37,8 @@ #define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ (MX21ADS_MMIO_BASE_ADDR + (offset)) +#define MX21ADS_CS8900A_MMIO_SIZE 0x200000 #define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) -#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) #define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) #define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) #define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) @@ -159,6 +159,18 @@ static struct platform_device mx21ads_nor_mtd_device = { .resource = &mx21ads_flash_resource, }; +static const struct resource mx21ads_cs8900_resources[] __initconst = { + DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), + DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ), +}; + +static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = { + .name = "cs89x0", + .id = 0, + .res = mx21ads_cs8900_resources, + .num_res = ARRAY_SIZE(mx21ads_cs8900_resources), +}; + static const struct imxuart_platform_data uart_pdata_rts __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -292,6 +304,8 @@ static void __init mx21ads_board_init(void) imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + platform_device_register_full( + (struct platform_device_info *)&mx21ads_cs8900_devinfo); } static void __init mx21ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 18f35816706a..c6d385c52257 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -31,6 +31,8 @@ #include <linux/regulator/machine.h> #include <linux/spi/l4f00242t03.h> +#include <media/soc_camera.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -52,6 +54,8 @@ #define SD1_CD IMX_GPIO_NR(2, 26) #define LCD_RESET IMX_GPIO_NR(1, 3) #define LCD_ENABLE IMX_GPIO_NR(1, 31) +#define CSI_PWRDWN IMX_GPIO_NR(4, 19) +#define CSI_RESET IMX_GPIO_NR(3, 6) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -141,6 +145,26 @@ static const int mx27pdk_pins[] __initconst = { PA30_PF_CONTRAST, LCD_ENABLE | GPIO_GPIO | GPIO_OUT, LCD_RESET | GPIO_GPIO | GPIO_OUT, + /* CSI */ + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, + CSI_PWRDWN | GPIO_GPIO | GPIO_OUT, + CSI_RESET | GPIO_GPIO | GPIO_OUT, +}; + +static struct gpio mx27_3ds_camera_gpios[] = { + { CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" }, + { CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" }, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -242,6 +266,7 @@ static struct regulator_init_data gpo_init = { static struct regulator_consumer_supply vmmc1_consumers[] = { REGULATOR_SUPPLY("vcore", "spi0.0"), + REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"), }; static struct regulator_init_data vmmc1_init = { @@ -270,6 +295,22 @@ static struct regulator_init_data vgen_init = { .consumer_supplies = vgen_consumers, }; +static struct regulator_consumer_supply vvib_consumers[] = { + REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"), +}; + +static struct regulator_init_data vvib_init = { + .constraints = { + .min_uV = 1300000, + .max_uV = 1300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vvib_consumers), + .consumer_supplies = vvib_consumers, +}; + static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { { .id = MC13783_REG_VMMC1, @@ -283,6 +324,9 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }, { .id = MC13783_REG_GPO3, /* Turn on 3.3V */ .init_data = &gpo_init, + }, { + .id = MC13783_REG_VVIB, /* Power OV2640 */ + .init_data = &vvib_init, }, }; @@ -311,6 +355,51 @@ static const struct spi_imx_master spi2_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi2_chipselect), }; +static int mx27_3ds_camera_power(struct device *dev, int on) +{ + /* enable or disable the camera */ + pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); + gpio_set_value(CSI_PWRDWN, on ? 0 : 1); + + if (!on) + goto out; + + /* If enabled, give a reset impulse */ + gpio_set_value(CSI_RESET, 0); + msleep(20); + gpio_set_value(CSI_RESET, 1); + msleep(100); + +out: + return 0; +} + +static struct i2c_board_info mx27_3ds_i2c_camera = { + I2C_BOARD_INFO("ov2640", 0x30), +}; + +static struct regulator_bulk_data mx27_3ds_camera_regs[] = { + { .supply = "cmos_vcore" }, + { .supply = "cmos_2v8" }, +}; + +static struct soc_camera_link iclink_ov2640 = { + .bus_id = 0, + .board_info = &mx27_3ds_i2c_camera, + .i2c_adapter_id = 0, + .power = mx27_3ds_camera_power, + .regulators = mx27_3ds_camera_regs, + .num_regulators = ARRAY_SIZE(mx27_3ds_camera_regs), +}; + +static struct platform_device mx27_3ds_ov2640 = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink_ov2640, + }, +}; + static struct imx_fb_videomode mx27_3ds_modes[] = { { /* 480x640 @ 60 Hz */ .mode = { @@ -367,12 +456,21 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { }, }; +static struct platform_device *devices[] __initdata = { + &mx27_3ds_ov2640, +}; + +static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = { + .clk = 26000000, +}; + static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { .bitrate = 100000, }; static void __init mx27pdk_init(void) { + int ret; imx27_soc_init(); mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), @@ -404,7 +502,17 @@ static void __init mx27pdk_init(void) if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); + platform_add_devices(devices, ARRAY_SIZE(devices)); imx27_add_imx_fb(&mx27_3ds_fb_data); + + ret = gpio_request_array(mx27_3ds_camera_gpios, + ARRAY_SIZE(mx27_3ds_camera_gpios)); + if (ret) { + pr_err("Failed to request camera gpios"); + iclink_ov2640.power = NULL; + } + + imx27_add_mx2_camera(&mx27_3ds_cam_pdata); } static void __init mx27pdk_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 4917aab0e253..4518e5448227 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -28,7 +28,6 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31ads.h> #include <mach/iomux-mx3.h> #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 @@ -39,6 +38,9 @@ #include "devices-imx31.h" +/* Base address of PBC controller */ +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT + /* PBC Board interrupt status register */ #define PBC_INTSTATUS 0x000016 @@ -62,6 +64,7 @@ #define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) #define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) +#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START #define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) #define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) @@ -69,6 +72,10 @@ #define MXC_MAX_EXP_IO_LINES 16 +/* CS8900 */ +#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) +#define CS4_CS8900_MMIO_START 0x20000 + /* * The serial port definition structure. */ @@ -101,11 +108,29 @@ static struct platform_device serial_device = { }, }; +static const struct resource mx31ads_cs8900_resources[] __initconst = { + DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K), + DEFINE_RES_IRQ(EXPIO_INT_ENET_INT), +}; + +static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { + .name = "cs89x0", + .id = 0, + .res = mx31ads_cs8900_resources, + .num_res = ARRAY_SIZE(mx31ads_cs8900_resources), +}; + static int __init mxc_init_extuart(void) { return platform_device_register(&serial_device); } +static void __init mxc_init_ext_ethernet(void) +{ + platform_device_register_full( + (struct platform_device_info *)&mx31ads_cs8900_devinfo); +} + static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -492,12 +517,15 @@ static void __init mxc_init_audio(void) mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); } -/* static mappings */ +/* + * Static mappings, starting from the CS4 start address up to the start address + * of the CS8900. + */ static struct map_desc mx31ads_io_desc[] __initdata = { { .virtual = MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), - .length = MX31_CS4_SIZE / 2, + .length = CS4_CS8900_MMIO_START, .type = MT_DEVICE }, }; @@ -522,6 +550,7 @@ static void __init mx31ads_init(void) mxc_init_imx_uart(); mxc_init_i2c(); mxc_init_audio(); + mxc_init_ext_ethernet(); } static void __init mx31ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index f225262b5c38..f17a15f28316 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -507,7 +507,7 @@ static void mx31moboard_poweroff(void) struct clk *clk = clk_get_sys("imx2-wdt.0", NULL); if (!IS_ERR(clk)) - clk_enable(clk); + clk_prepare_enable(clk); mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST); @@ -530,6 +530,8 @@ static void __init mx31moboard_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); gpio_led_register_device(-1, &mx31moboard_led_pdata); + imx31_add_imx2_wdt(NULL); + imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); @@ -590,7 +592,7 @@ static void __init mx31moboard_reserve(void) } MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") - /* Maintainer: Valentin Longchamp, EPFL Mobots group */ + /* Maintainer: Philippe Retornaz, EPFL Mobots group */ .atag_offset = 0x100, .reserve = mx31moboard_reserve, .map_io = mx31_map_io, diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 0af6c9c5b3fd..e14291d89e4f 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -4,6 +4,11 @@ * * Author: Fabio Estevam <fabio.estevam@freescale.com> * + * Copyright (C) 2011 Meprolight, Ltd. + * Alex Gershgorin <alexg@meprolight.com> + * + * Modified from i.MX31 3-Stack Development System + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -34,15 +39,102 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <asm/memblock.h> #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> #include <mach/irqs.h> #include <mach/3ds_debugboard.h> +#include <video/platform_lcd.h> + +#include <media/soc_camera.h> #include "devices-imx35.h" +#define GPIO_MC9S08DZ60_GPS_ENABLE 0 +#define GPIO_MC9S08DZ60_HDD_ENABLE 4 +#define GPIO_MC9S08DZ60_WIFI_ENABLE 5 +#define GPIO_MC9S08DZ60_LCD_ENABLE 6 +#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8 + +static const struct fb_videomode fb_modedb[] = { + { + /* 800x480 @ 55 Hz */ + .name = "Ceramate-CLAA070VC01", + .refresh = 55, + .xres = 800, + .yres = 480, + .pixclock = 40000, + .left_margin = 40, + .right_margin = 40, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static const struct ipu_platform_data mx3_ipu_data __initconst = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata __initdata = { + .name = "Ceramate-CLAA070VC01", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct i2c_board_info __initdata i2c_devices_3ds[] = { + { + I2C_BOARD_INFO("mc9s08dz60", 0x69), + }, +}; + +static int lcd_power_gpio = -ENXIO; + +static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, + void *data) +{ + return !strcmp(chip->label, data); +} + +static void mx35_3ds_lcd_set_power( + struct plat_lcd_data *pd, unsigned int power) +{ + struct gpio_chip *chip; + + if (!gpio_is_valid(lcd_power_gpio)) { + chip = gpiochip_find( + "mc9s08dz60", mc9s08dz60_gpiochip_match); + if (chip) { + lcd_power_gpio = + chip->base + GPIO_MC9S08DZ60_LCD_ENABLE; + if (gpio_request(lcd_power_gpio, "lcd_power") < 0) { + pr_err("error: gpio already requested!\n"); + lcd_power_gpio = -ENXIO; + } + } else { + pr_err("error: didn't find mc9s08dz60 gpio chip\n"); + } + } + + if (gpio_is_valid(lcd_power_gpio)) + gpio_set_value_cansleep(lcd_power_gpio, power); +} + +static struct plat_lcd_data mx35_3ds_lcd_data = { + .set_power = mx35_3ds_lcd_set_power, +}; + +static struct platform_device mx35_3ds_lcd = { + .name = "platform-lcd", + .dev.platform_data = &mx35_3ds_lcd_data, +}; + #define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1)) static const struct imxuart_platform_data uart_pdata __initconst = { @@ -120,6 +212,109 @@ static iomux_v3_cfg_t mx35pdk_pads[] = { /* I2C1 */ MX35_PAD_I2C1_CLK__I2C1_SCL, MX35_PAD_I2C1_DAT__I2C1_SDA, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, + /* CSI */ + MX35_PAD_TX1__IPU_CSI_D_6, + MX35_PAD_TX0__IPU_CSI_D_7, + MX35_PAD_CSI_D8__IPU_CSI_D_8, + MX35_PAD_CSI_D9__IPU_CSI_D_9, + MX35_PAD_CSI_D10__IPU_CSI_D_10, + MX35_PAD_CSI_D11__IPU_CSI_D_11, + MX35_PAD_CSI_D12__IPU_CSI_D_12, + MX35_PAD_CSI_D13__IPU_CSI_D_13, + MX35_PAD_CSI_D14__IPU_CSI_D_14, + MX35_PAD_CSI_D15__IPU_CSI_D_15, + MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC, + MX35_PAD_CSI_MCLK__IPU_CSI_MCLK, + MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK, + MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC, +}; + +/* + * Camera support +*/ +static phys_addr_t mx3_camera_base __initdata; +#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M + +static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = { + .flags = MX3_CAMERA_DATAWIDTH_8, + .mclk_10khz = 2000, +}; + +static int __init imx35_3ds_init_camera(void) +{ + int dma, ret = -ENOMEM; + struct platform_device *pdev = + imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + if (!mx3_camera_base) + goto err; + + dma = dma_declare_coherent_memory(&pdev->dev, + mx3_camera_base, mx3_camera_base, + MX35_3DS_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + + if (!(dma & DMA_MEMORY_MAP)) + goto err; + + ret = platform_device_add(pdev); + if (ret) +err: + platform_device_put(pdev); + + return ret; +} + +static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct i2c_board_info mx35_3ds_i2c_camera = { + I2C_BOARD_INFO("ov2640", 0x30), +}; + +static struct soc_camera_link iclink_ov2640 = { + .bus_id = 0, + .board_info = &mx35_3ds_i2c_camera, + .i2c_adapter_id = 0, + .power = NULL, +}; + +static struct platform_device mx35_3ds_ov2640 = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink_ov2640, + }, }; static int mx35_3ds_otg_init(struct platform_device *pdev) @@ -179,6 +374,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { + struct platform_device *imx35_fb_pdev; + imx35_soc_init(); mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); @@ -204,6 +401,17 @@ static void __init mx35_3ds_init(void) pr_warn("Init of the debugboard failed, all " "devices on the debugboard are unusable.\n"); imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); + + i2c_register_board_info( + 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); + + imx35_add_ipu_core(&mx35_3ds_ipu_data); + platform_device_register(&mx35_3ds_ov2640); + imx35_3ds_init_camera(); + + imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); + mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; + platform_device_register(&mx35_3ds_lcd); } static void __init mx35pdk_timer_init(void) @@ -215,6 +423,13 @@ struct sys_timer mx35pdk_timer = { .init = mx35pdk_timer_init, }; +static void __init mx35_3ds_reserve(void) +{ + /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ + mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE, + MX35_3DS_CAMERA_BUF_SIZE); +} + MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ .atag_offset = 0x100, @@ -224,5 +439,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .handle_irq = imx35_handle_irq, .timer = &mx35pdk_timer, .init_machine = mx35_3ds_init, + .reserve = mx35_3ds_reserve, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c index 3a5ed2dd885a..586e9f822124 100644 --- a/arch/arm/mach-imx/mach-mx51_efikamx.c +++ b/arch/arm/mach-imx/mach-mx51_efikamx.c @@ -33,6 +33,7 @@ #include <mach/iomux-mx51.h> #include <asm/setup.h> +#include <asm/system_info.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c index ea5f65b0381a..24aded9e109f 100644 --- a/arch/arm/mach-imx/mach-mx51_efikasb.c +++ b/arch/arm/mach-imx/mach-mx51_efikasb.c @@ -36,6 +36,7 @@ #include <mach/iomux-mx51.h> #include <asm/setup.h> +#include <asm/system_info.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index d3b9c6b5edde..541152e450c4 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -36,7 +36,6 @@ #include <mach/hardware.h> #include <mach/iomux-mx27.h> #include <asm/mach/time.h> -#include <mach/audmux.h> #include <mach/irqs.h> #include <mach/ulpi.h> @@ -359,18 +358,6 @@ static void __init pca100_init(void) imx27_soc_init(); - /* SSI unit */ - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, - MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V1_PCR_TFCSEL(3) | - MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */ - MXC_AUDMUX_V1_PCR_RXDSEL(3)); - mxc_audmux_v1_configure_port(3, - MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V1_PCR_TFCSEL(0) | - MXC_AUDMUX_V1_PCR_TFSDIR | - MXC_AUDMUX_V1_PCR_RXDSEL(0)); - ret = mxc_gpio_setup_multiple_pins(pca100_pins, ARRAY_SIZE(pca100_pins), "PCA100"); if (ret) diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 16f126da9f8f..2f3debe2a113 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -233,7 +233,7 @@ static struct regulator_init_data sdhc1_data = { static struct regulator_consumer_supply cam_consumers[] = { { - .dev = NULL, + .dev_name = NULL, .supply = "imx_cam_vcc", }, }; diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 06dc106519ae..237474fcca23 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -37,7 +37,6 @@ #include <mach/common.h> #include <mach/iomux-mx35.h> #include <mach/ulpi.h> -#include <mach/audmux.h> #include "devices-imx35.h" @@ -362,18 +361,6 @@ static void __init pcm043_init(void) mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); - mxc_audmux_v2_configure_port(3, - MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V2_PTCR_TFSEL(0) | - MXC_AUDMUX_V2_PTCR_TFSDIR, - MXC_AUDMUX_V2_PDCR_RXDSEL(0)); - - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V2_PTCR_TCSEL(3) | - MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ - MXC_AUDMUX_V2_PDCR_RXDSEL(3)); - imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx2_wdt(NULL); diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 3f05dfebacc9..14d540edfd1e 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -75,6 +75,10 @@ void __init mx21_init_irq(void) mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); } +static const struct resource imx21_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K), +}; + void __init imx21_soc_init(void) { mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); @@ -85,4 +89,6 @@ void __init imx21_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); imx_add_imx_dma(); + platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, + ARRAY_SIZE(imx21_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index cc4d152bd9bd..153b457acdc0 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -83,6 +83,10 @@ static struct sdma_platform_data imx25_sdma_pdata __initdata = { .script_addrs = &imx25_sdma_script, }; +static const struct resource imx25_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx25_soc_init(void) { /* i.mx25 has the i.mx31 type gpio */ @@ -93,4 +97,7 @@ void __init imx25_soc_init(void) /* i.mx25 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); + /* i.mx25 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res, + ARRAY_SIZE(imx25_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 96dd1f5ea7bd..8cb3f5e3e569 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -75,6 +75,10 @@ void __init mx27_init_irq(void) mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); } +static const struct resource imx27_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K), +}; + void __init imx27_soc_init(void) { /* i.mx27 has the i.mx21 type gpio */ @@ -86,4 +90,7 @@ void __init imx27_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); imx_add_imx_dma(); + /* imx27 has the imx21 type audmux */ + platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, + ARRAY_SIZE(imx27_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 31807d2a8b7b..f8ca96c354f2 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -34,31 +34,31 @@ static void imx3_idle(void) { unsigned long reg = 0; - if (!need_resched()) - __asm__ __volatile__( - /* disable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #0x00001000\n" - "bic %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - /* invalidate I cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c5, 0\n" - /* clear and invalidate D cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c14, 0\n" - /* WFI */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c0, 4\n" - "nop\n" "nop\n" "nop\n" "nop\n" - "nop\n" "nop\n" "nop\n" - /* enable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #0x00001000\n" - "orr %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - : "=r" (reg)); - local_irq_enable(); + mx3_cpu_lp_set(MX3_WAIT); + + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); } static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, @@ -78,7 +78,7 @@ static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, return __arm_ioremap(phys_addr, size, mtype); } -void imx3_init_l2x0(void) +void __init imx3_init_l2x0(void) { void __iomem *l2x0_base; void __iomem *clkctl_base; @@ -134,8 +134,8 @@ void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; + arm_pm_idle = imx3_idle; } void __init mx31_init_irq(void) @@ -158,6 +158,10 @@ static struct sdma_platform_data imx31_sdma_pdata __initdata = { .script_addrs = &imx31_to2_sdma_script, }; +static const struct resource imx31_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx31_soc_init(void) { int to_version = mx31_revision() >> 4; @@ -175,6 +179,12 @@ void __init imx31_soc_init(void) } imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); + + imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR)); + imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR)); + + platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res, + ARRAY_SIZE(imx31_audmux_res)); } #endif /* ifdef CONFIG_SOC_IMX31 */ @@ -197,7 +207,7 @@ void __init imx35_init_early(void) mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - pm_idle = imx3_idle; + arm_pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } @@ -241,6 +251,10 @@ static struct sdma_platform_data imx35_sdma_pdata __initdata = { .script_addrs = &imx35_to2_sdma_script, }; +static const struct resource imx35_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx35_soc_init(void) { int to_version = mx35_revision() >> 4; @@ -259,5 +273,13 @@ void __init imx35_soc_init(void) } imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); + + /* Setup AIPS registers */ + imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR)); + imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR)); + + /* i.mx35 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res, + ARRAY_SIZE(imx35_audmux_res)); } #endif /* ifdef CONFIG_SOC_IMX35 */ diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea3817..51af9fa56944 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -26,23 +26,17 @@ static struct clk *gpc_dvfs_clk; static void imx5_idle(void) { - if (!need_resched()) { - /* gpc clock is needed for SRPG */ - if (gpc_dvfs_clk == NULL) { - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - if (IS_ERR(gpc_dvfs_clk)) - goto err0; - } - clk_enable(gpc_dvfs_clk); - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake()) - goto err1; - cpu_do_idle(); -err1: - clk_disable(gpc_dvfs_clk); + /* gpc clock is needed for SRPG */ + if (gpc_dvfs_clk == NULL) { + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + if (IS_ERR(gpc_dvfs_clk)) + return; } -err0: - local_irq_enable(); + clk_enable(gpc_dvfs_clk); + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (tzic_enable_wake() != 0) + cpu_do_idle(); + clk_disable(gpc_dvfs_clk); } /* @@ -108,7 +102,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - pm_idle = imx5_idle; + arm_pm_idle = imx5_idle; } void __init imx53_init_early(void) @@ -170,6 +164,18 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = { .script_addrs = &imx53_sdma_script, }; +static const struct resource imx50_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K), +}; + +static const struct resource imx51_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K), +}; + +static const struct resource imx53_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx50_soc_init(void) { /* i.mx50 has the i.mx31 type gpio */ @@ -179,6 +185,10 @@ void __init imx50_soc_init(void) mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); + + /* i.mx50 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res, + ARRAY_SIZE(imx50_audmux_res)); } void __init imx51_soc_init(void) @@ -191,6 +201,14 @@ void __init imx51_soc_init(void) /* i.mx51 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); + + /* Setup AIPS registers */ + imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR)); + imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR)); + + /* i.mx51 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res, + ARRAY_SIZE(imx51_audmux_res)); } void __init imx53_soc_init(void) @@ -206,4 +224,12 @@ void __init imx53_soc_init(void) /* i.mx53 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); + + /* Setup AIPS registers */ + imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR)); + imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR)); + + /* i.mx53 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res, + ARRAY_SIZE(imx53_audmux_res)); } diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index e455d2f855bf..6fcffa7db978 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -10,7 +10,6 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/system.h> #include <mach/hardware.h> static int mx27_suspend_enter(suspend_state_t state) @@ -23,7 +22,7 @@ static int mx27_suspend_enter(suspend_state_t state) cscr &= 0xFFFFFFFC; __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); /* Executes WFI */ - arch_idle(); + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c new file mode 100644 index 000000000000..b3752439632e --- /dev/null +++ b/arch/arm/mach-imx/pm-imx3.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/io.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/devices-common.h> +#include "crmregs-imx3.h" + +/* + * Set cpu low power mode before WFI instruction. This function is called + * mx3 because it can be used for mx31 and mx35. + * Currently only WAIT_MODE is supported. + */ +void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode) +{ + int reg = __raw_readl(MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_LPM_MASK; + + switch (mode) { + case MX3_WAIT: + if (cpu_is_mx35()) + reg |= MXC_CCM_CCMR_LPM_WAIT_MX35; + __raw_writel(reg, MXC_CCM_CCMR); + break; + default: + pr_err("Unknown cpu power mode: %d\n", mode); + return; + } +} diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 6dc093448057..e26a9cb05ed8 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -89,7 +89,7 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) static int mx5_suspend_prepare(void) { - return clk_enable(gpc_dvfs_clk); + return clk_prepare_enable(gpc_dvfs_clk); } static int mx5_suspend_enter(suspend_state_t state) @@ -119,7 +119,7 @@ static int mx5_suspend_enter(suspend_state_t state) static void mx5_suspend_finish(void) { - clk_disable(gpc_dvfs_clk); + clk_disable_unprepare(gpc_dvfs_clk); } static int mx5_pm_valid(suspend_state_t state) diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 019f0ab08f66..1a65d77bd55d 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -27,7 +27,6 @@ #include <mach/platform.h> #include <asm/irq.h> #include <mach/cm.h> -#include <asm/system.h> #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/mach/time.h> @@ -35,67 +34,23 @@ static struct amba_pl010_data integrator_uart_data; -static struct amba_device rtc_device = { - .dev = { - .init_name = "mb:15", - }, - .res = { - .start = INTEGRATOR_RTC_BASE, - .end = INTEGRATOR_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_RTCINT, NO_IRQ }, -}; +#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } +#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } +#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 } +#define KMI0_IRQ { IRQ_KMIINT0 } +#define KMI1_IRQ { IRQ_KMIINT1 } -static struct amba_device uart0_device = { - .dev = { - .init_name = "mb:16", - .platform_data = &integrator_uart_data, - }, - .res = { - .start = INTEGRATOR_UART0_BASE, - .end = INTEGRATOR_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_UARTINT0, NO_IRQ }, -}; +static AMBA_APB_DEVICE(rtc, "mb:15", 0, + INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); -static struct amba_device uart1_device = { - .dev = { - .init_name = "mb:17", - .platform_data = &integrator_uart_data, - }, - .res = { - .start = INTEGRATOR_UART1_BASE, - .end = INTEGRATOR_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_UARTINT1, NO_IRQ }, -}; +static AMBA_APB_DEVICE(uart0, "mb:16", 0, + INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); -static struct amba_device kmi0_device = { - .dev = { - .init_name = "mb:18", - }, - .res = { - .start = KMI0_BASE, - .end = KMI0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_KMIINT0, NO_IRQ }, -}; +static AMBA_APB_DEVICE(uart1, "mb:17", 0, + INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); -static struct amba_device kmi1_device = { - .dev = { - .init_name = "mb:19", - }, - .res = { - .start = KMI1_BASE, - .end = KMI1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_KMIINT1, NO_IRQ }, -}; +static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL); +static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL); static struct amba_device *amba_devs[] __initdata = { &rtc_device, diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 8cbb75a96bd4..3e538da6cb1f 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -401,24 +401,21 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; - d = kzalloc(sizeof(struct amba_device), GFP_KERNEL); + d = amba_device_alloc(NULL, pc_base, SZ_4K); if (!d) continue; dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12); d->dev.parent = &dev->dev; - d->res.start = dev->resource.start + idev->offset; - d->res.end = d->res.start + SZ_4K - 1; - d->res.flags = IORESOURCE_MEM; d->irq[0] = dev->irq; d->irq[1] = dev->irq; d->periphid = idev->id; d->dev.platform_data = idev->platform_data; - ret = amba_device_register(d, &dev->resource); + ret = amba_device_add(d, &dev->resource); if (ret) { dev_err(&d->dev, "unable to register device: %d\n", ret); - kfree(d); + amba_device_put(d); } } diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S index 3d029c9f3ef6..5cc7b85ad9df 100644 --- a/arch/arm/mach-integrator/include/mach/entry-macro.S +++ b/arch/arm/mach-integrator/include/mach/entry-macro.S @@ -11,15 +11,9 @@ #include <mach/platform.h> #include <mach/irqs.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp /* FIXME: should not be using soo many LDRs here */ ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE) diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h deleted file mode 100644 index 901514eba4a6..000000000000 --- a/arch/arm/mach-integrator/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index a8b6aa6003f3..be9ead4a3bcc 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -347,32 +347,14 @@ static struct mmci_platform_data mmc_data = { .gpio_cd = -1, }; -static struct amba_device mmc_device = { - .dev = { - .init_name = "mb:1c", - .platform_data = &mmc_data, - }, - .res = { - .start = INTEGRATOR_CP_MMC_BASE, - .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }, - .periphid = 0, -}; +#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } +#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } -static struct amba_device aaci_device = { - .dev = { - .init_name = "mb:1d", - }, - .res = { - .start = INTEGRATOR_CP_AACI_BASE, - .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_CP_AACIINT, NO_IRQ }, - .periphid = 0, -}; +static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE, + INTEGRATOR_CP_MMC_IRQS, &mmc_data); + +static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE, + INTEGRATOR_CP_AACI_IRQS, NULL); /* @@ -425,21 +407,8 @@ static struct clcd_board clcd_data = { .remove = versatile_clcd_remove_dma, }; -static struct amba_device clcd_device = { - .dev = { - .init_name = "mb:c0", - .coherent_dma_mask = ~0, - .platform_data = &clcd_data, - }, - .res = { - .start = INTCP_PA_CLCD_BASE, - .end = INTCP_PA_CLCD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = { IRQ_CP_CLCDCINT, NO_IRQ }, - .periphid = 0, -}; +static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE, + { IRQ_CP_CLCDCINT }, &clcd_data); static struct amba_device *amba_devs[] __initdata = { &mmc_device, diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index 28be186adb89..466defa97842 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -29,7 +29,6 @@ #include <mach/hardware.h> #include <mach/platform.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <mach/cm.h> diff --git a/arch/arm/mach-integrator/pci.c b/arch/arm/mach-integrator/pci.c index 520b6bf81bb1..36068f438f2b 100644 --- a/arch/arm/mach-integrator/pci.c +++ b/arch/arm/mach-integrator/pci.c @@ -27,7 +27,6 @@ #include <linux/init.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 3c82566acece..4be172c3cbe0 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -32,7 +32,6 @@ #include <mach/platform.h> #include <asm/irq.h> #include <asm/signal.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <asm/irq_regs.h> @@ -378,9 +377,10 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource(&sys->resources, &ioport_resource); - pci_add_resource(&sys->resources, &non_mem); - pci_add_resource(&sys->resources, &pre_mem); + pci_add_resource_offset(&sys->resources, + &ioport_resource, sys->io_offset); + pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-iop13xx/include/mach/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S index a624a7870c64..1a2d603488d8 100644 --- a/arch/arm/mach-iop13xx/include/mach/entry-macro.S +++ b/arch/arm/mach-iop13xx/include/mach/entry-macro.S @@ -16,9 +16,6 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * */ - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp mrc p15, 0, \tmp, c15, c1, 0 orr \tmp, \tmp, #(1 << 6) diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h deleted file mode 100644 index 1f31ed3f8ae2..000000000000 --- a/arch/arm/mach-iop13xx/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop13xx/include/mach/system.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index b8f5a8736511..861cb12ef436 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -1084,8 +1084,8 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) request_resource(&ioport_resource, &res[0]); request_resource(&iomem_resource, &res[1]); - pci_add_resource(&sys->resources, &res[0]); - pci_add_resource(&sys->resources, &res[1]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S index b02fb56bafcc..ea13ae02d9b1 100644 --- a/arch/arm/mach-iop32x/include/mach/entry-macro.S +++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S @@ -9,9 +9,6 @@ */ #include <mach/iop32x.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp mrc p15, 0, \tmp, c15, c1, 0 orr \tmp, \tmp, #(1 << 6) diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h deleted file mode 100644 index 4a88727bca98..000000000000 --- a/arch/arm/mach-iop32x/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S index 4e1f7282b354..0a398fe1fba4 100644 --- a/arch/arm/mach-iop33x/include/mach/entry-macro.S +++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S @@ -9,9 +9,6 @@ */ #include <mach/iop33x.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp mrc p15, 0, \tmp, c15, c1, 0 orr \tmp, \tmp, #(1 << 6) diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h deleted file mode 100644 index 4f98e765397c..000000000000 --- a/arch/arm/mach-iop33x/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c index cdae24e46eea..bbf54d794ce8 100644 --- a/arch/arm/mach-iop33x/uart.c +++ b/arch/arm/mach-iop33x/uart.c @@ -22,7 +22,6 @@ #include <asm/page.h> #include <asm/mach/map.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/memory.h> #include <mach/hardware.h> #include <asm/hardware/iop3xx.h> diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 81c45370a4e6..f214cdff01cb 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -32,7 +32,6 @@ #include <asm/memory.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index e872d238cd0f..4867f408617c 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -36,7 +36,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S index 5850ffc8c751..c4444dff9202 100644 --- a/arch/arm/mach-ixp2000/include/mach/entry-macro.S +++ b/arch/arm/mach-ixp2000/include/mach/entry-macro.S @@ -9,15 +9,9 @@ */ #include <mach/irqs.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp mov \irqnr, #0x0 @clear out irqnr as default diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h deleted file mode 100644 index a7fb08b2b8e7..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/system.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/system.h - * - * Copyright (C) 2002 Intel Corp. - * Copyricht (C) 2003-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index f53e911ec94a..915ad49e3b8f 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -134,11 +133,11 @@ static void ixdp2400_pci_postinit(void) if (ixdp2x00_master_npu()) { dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } else { dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); ixdp2x00_slave_pci_postinit(); diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index a2e7c393e74f..a9f1819ea049 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -262,14 +261,14 @@ int __init ixdp2800_pci_init(void) pci_common_init(&ixdp2800_pci); if (ixdp2x00_master_npu()) { dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); ixdp2800_master_enable_slave(); ixdp2800_master_wait_for_slave_bus_scan(); } else { dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } } diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 634b6c852f68..421e38dc0fac 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -30,7 +30,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -239,12 +238,12 @@ void ixdp2x00_slave_pci_postinit(void) * Remove PMC device is there is one */ if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) { - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 7632beadabf6..5196c39cdba4 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -34,7 +34,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 626fda435aa9..9c02de932fac 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -26,7 +26,6 @@ #include <linux/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach/pci.h> @@ -243,8 +242,10 @@ int ixp2000_pci_setup(int nr, struct pci_sys_data *sys) if (nr >= 1) return 0; - pci_add_resource(&sys->resources, &ixp2000_pci_io_space); - pci_add_resource(&sys->resources, &ixp2000_pci_mem_space); + pci_add_resource_offset(&sys->resources, + &ixp2000_pci_io_space, sys->io_offset); + pci_add_resource_offset(&sys->resources, + &ixp2000_pci_mem_space, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 0923bb905cc0..d2c2dc35cbdd 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -34,7 +34,6 @@ #include <asm/memory.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> @@ -441,6 +440,9 @@ static struct platform_device *ixp23xx_devices[] __initdata = { void __init ixp23xx_sys_init(void) { + /* by default, the idle code is disabled */ + disable_hlt(); + *IXP23XX_EXP_UNIT_FUSE |= 0xf; platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); } diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index 8f2487e1fc4e..d142d45dea12 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -32,7 +32,6 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S index 3f5338a7bbdd..3fd2cb984e42 100644 --- a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S +++ b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S @@ -2,15 +2,9 @@ * arch/arm/mach-ixp23xx/include/mach/entry-macro.S */ - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET) ldr \irqnr, [\irqnr] @ get interrupt number diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h deleted file mode 100644 index 277dda7334b9..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/system.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/system.h - * - * Copyright (C) 2003 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ -#if 0 - if (!hlt_counter) - cpu_do_idle(); -#endif -} diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index 5d5dd3e8d069..b0e07db5ceaf 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -36,7 +36,6 @@ #include <asm/memory.h> #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 25b5c462cea2..911f5a58e006 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -28,7 +28,6 @@ #include <asm/irq.h> #include <asm/sizes.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <mach/hardware.h> @@ -281,8 +280,10 @@ int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) if (nr >= 1) return 0; - pci_add_resource(&sys->resources, &ixp23xx_pci_io_space); - pci_add_resource(&sys->resources, &ixp23xx_pci_mem_space); + pci_add_resource_offset(&sys->resources, + &ixp23xx_pci_io_space, sys->io_offset); + pci_add_resource_offset(&sys->resources, + &ixp23xx_pci_mem_space, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index 377283fc658c..eaaa3fa9fd05 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -36,7 +36,6 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 5eff15f24bc2..d5719eb42591 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -32,7 +32,6 @@ #include <asm/cputype.h> #include <asm/irq.h> #include <asm/sizes.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <mach/hardware.h> @@ -472,8 +471,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) request_resource(&ioport_resource, &res[0]); request_resource(&iomem_resource, &res[1]); - pci_add_resource(&sys->resources, &res[0]); - pci_add_resource(&sys->resources, &res[1]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); platform_notify = ixp4xx_pci_platform_notify; platform_notify_remove = ixp4xx_pci_platform_notify_remove; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 3841ab4146ba..a6329a0a8ec4 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -236,6 +236,12 @@ void __init ixp4xx_init_irq(void) { int i = 0; + /* + * ixp4xx does not implement the XScale PWRMODE register + * so it must not call cpu_do_idle(). + */ + disable_hlt(); + /* Route all sources to IRQ instead of FIQ */ *IXP4XX_ICLR = 0x0; diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index c0e3d69a8aec..78ae12c46261 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -12,7 +12,6 @@ #include <linux/pci.h> #include <linux/serial_8250.h> #include <asm/mach-types.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S index f2e14e94ed15..79adf83e2c3d 100644 --- a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S @@ -9,15 +9,9 @@ */ #include <mach/hardware.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET) ldr \irqstat, [\irqstat] @ get interrupts diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h deleted file mode 100644 index 140a9bef4466..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/system.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -static inline void arch_idle(void) -{ - /* ixp4xx does not implement the XScale PWRMODE register, - * so it must not call cpu_do_idle() here. - */ -#if 0 - cpu_do_idle(); -#endif -} diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7fc603b46891..90ceab761929 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -44,6 +44,20 @@ config MACH_GURUPLUG Say 'Y' here if you want your kernel to support the Marvell GuruPlug Reference Board. +config ARCH_KIRKWOOD_DT + bool "Marvell Kirkwood Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Kirkwood using flattened device tree. + +config MACH_DREAMPLUG_DT + bool "Marvell DreamPlug (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Marvell DreamPlug (Flattened Device Tree). + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 5dcaa81a2ec3..e299a9576bf0 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -20,3 +20,5 @@ obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o +obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 760a0efe7580..16f938522304 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c new file mode 100644 index 000000000000..985453994dd3 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -0,0 +1,152 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-dreamplug.c + * + * Marvell DreamPlug Reference Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +struct mtd_partition dreamplug_partitions[] = { + { + .name = "u-boot", + .size = SZ_512K, + .offset = 0, + }, + { + .name = "u-boot env", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K, + }, + { + .name = "dtb", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K + SZ_512K, + }, +}; + +static const struct flash_platform_data dreamplug_spi_slave_data = { + .type = "mx25l1606e", + .name = "spi_flash", + .parts = dreamplug_partitions, + .nr_parts = ARRAY_SIZE(dreamplug_partitions), +}; + +static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &dreamplug_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct mv643xx_eth_platform_data dreamplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data dreamplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data dreamplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data dreamplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led dreamplug_led_pins[] = { + { + .name = "dreamplug:blue:bluetooth", + .gpio = 47, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi", + .gpio = 48, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi_ap", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dreamplug_led_data = { + .leds = dreamplug_led_pins, + .num_leds = ARRAY_SIZE(dreamplug_led_pins), +}; + +static struct platform_device dreamplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dreamplug_led_data, + } +}; + +static unsigned int dreamplug_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP47_GPIO, /* Bluetooth LED */ + MPP48_GPIO, /* Wifi LED */ + MPP49_GPIO, /* Wifi AP LED */ + 0 +}; + +void __init dreamplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(dreamplug_mpp_config); + + spi_register_board_info(dreamplug_spi_slave_info, + ARRAY_SIZE(dreamplug_spi_slave_info)); + kirkwood_spi_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&dreamplug_ge00_data); + kirkwood_ge01_init(&dreamplug_ge01_data); + kirkwood_sata_init(&dreamplug_sata_data); + kirkwood_sdio_init(&dreamplug_mvsdio_data); + + platform_device_register(&dreamplug_leds); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c new file mode 100644 index 000000000000..1c672d9e6656 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -0,0 +1,75 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-dt.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/bridge-regs.h> +#include "common.h" + +static struct of_device_id kirkwood_dt_match_table[] __initdata = { + { .compatible = "simple-bus", }, + { } +}; + +static void __init kirkwood_dt_init(void) +{ + pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); + + /* + * Disable propagation of mbus errors to the CPU local bus, + * as this causes mbus errors (which can occur for example + * for PCI aborts) to throw CPU aborts, which we're not set + * up to deal with. + */ + writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + + kirkwood_setup_cpu_mbus(); + +#ifdef CONFIG_CACHE_FEROCEON_L2 + kirkwood_l2_init(); +#endif + + /* internal devices that every board has */ + kirkwood_wdt_init(); + kirkwood_xor0_init(); + kirkwood_xor1_init(); + kirkwood_crypto_init(); + +#ifdef CONFIG_KEXEC + kexec_reinit = kirkwood_enable_pcie; +#endif + + if (of_machine_is_compatible("globalscale,dreamplug")) + dreamplug_init(); + + of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); +} + +static const char *kirkwood_dt_board_compat[] = { + "globalscale,dreamplug", + NULL +}; + +DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") + /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, + .init_machine = kirkwood_dt_init, + .restart = kirkwood_restart, + .dt_compat = kirkwood_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 77d4852e19f2..a02cae881f2f 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -279,7 +279,7 @@ void __init kirkwood_crypto_init(void) /***************************************************************************** * XOR0 ****************************************************************************/ -static void __init kirkwood_xor0_init(void) +void __init kirkwood_xor0_init(void) { kirkwood_clk_ctrl |= CGC_XOR0; @@ -291,7 +291,7 @@ static void __init kirkwood_xor0_init(void) /***************************************************************************** * XOR1 ****************************************************************************/ -static void __init kirkwood_xor1_init(void) +void __init kirkwood_xor1_init(void) { kirkwood_clk_ctrl |= CGC_XOR1; @@ -303,7 +303,7 @@ static void __init kirkwood_xor1_init(void) /***************************************************************************** * Watchdog ****************************************************************************/ -static void __init kirkwood_wdt_init(void) +void __init kirkwood_wdt_init(void) { orion_wdt_init(kirkwood_tclk); } @@ -392,7 +392,7 @@ void __init kirkwood_audio_init(void) /* * Identify device ID and revision. */ -static char * __init kirkwood_id(void) +char * __init kirkwood_id(void) { u32 dev, rev; @@ -435,7 +435,7 @@ static char * __init kirkwood_id(void) } } -static void __init kirkwood_l2_init(void) +void __init kirkwood_l2_init(void) { #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); @@ -450,7 +450,6 @@ void __init kirkwood_init(void) { printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); - kirkwood_i2s_data.tclk = kirkwood_tclk; /* * Disable propagation of mbus errors to the CPU local bus, diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 9071a397136d..fa8e7689c436 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -51,6 +51,21 @@ void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev void kirkwood_audio_init(void); void kirkwood_restart(char, const char *); +/* board init functions for boards not fully converted to fdt */ +#ifdef CONFIG_MACH_DREAMPLUG_DT +void dreamplug_init(void); +#else +static inline void dreamplug_init(void) {}; +#endif + +/* early init functions not converted to fdt yet */ +char *kirkwood_id(void); +void kirkwood_l2_init(void); +void kirkwood_wdt_init(void); +void kirkwood_xor0_init(void); +void kirkwood_xor1_init(void); +void kirkwood_crypto_init(void); + extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S index 8939d36f893c..82db29f7af8f 100644 --- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S @@ -10,12 +10,6 @@ #include <mach/bridge-regs.h> - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_preamble, base, tmp ldr \base, =IRQ_VIRT_BASE .endm diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h deleted file mode 100644 index 5fddde002b5e..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 01f8c8992880..7e99c3f340fc 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -83,6 +83,11 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static struct platform_device openrd_client_audio_device = { + .name = "openrd-client-audio", + .id = -1, +}; + static int __initdata uart1; static int __init sd_uart_selection(char *str) @@ -172,6 +177,7 @@ static void __init openrd_init(void) kirkwood_i2c_init(); if (machine_is_openrd_client() || machine_is_openrd_ultimate()) { + platform_device_register(&openrd_client_audio_device); i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index a066a6d8d9d2..f56a0118c1bb 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -198,9 +198,9 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe%d Memory resource failed\n", index); - pci_add_resource(&sys->resources, &pp->res[0]); - pci_add_resource(&sys->resources, &pp->res[1]); sys->io_offset = 0; + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); /* * Generic PCIe unit setup. diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index 966b2b3bb813..f9d2a11b7f96 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -106,6 +106,11 @@ static struct platform_device hp_t5325_button_device = { } }; +static struct platform_device hp_t5325_audio_device = { + .name = "t5325-audio", + .id = -1, +}; + static unsigned int hp_t5325_mpp_config[] __initdata = { MPP0_NF_IO2, MPP1_SPI_MOSI, @@ -179,6 +184,7 @@ static void __init hp_t5325_init(void) kirkwood_sata_init(&hp_t5325_sata_data); kirkwood_ehci_init(); platform_device_register(&hp_t5325_button_device); + platform_device_register(&hp_t5325_audio_device); i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S index b4fe0c11c6ce..8315b34f32ff 100644 --- a/arch/arm/mach-ks8695/include/mach/entry-macro.S +++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S @@ -14,16 +14,10 @@ #include <mach/hardware.h> #include <mach/regs-irq.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h deleted file mode 100644 index 59fe992395bf..000000000000 --- a/arch/arm/mach-ks8695/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/system.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * KS8695 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks, - */ - cpu_do_idle(); - -} - -#endif diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index b26f992071df..acc701435817 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -169,8 +169,8 @@ static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys) request_resource(&iomem_resource, &pci_mem); request_resource(&ioport_resource, &pci_io); - pci_add_resource(&sys->resources, &pci_io); - pci_add_resource(&sys->resources, &pci_mem); + pci_add_resource_offset(&sys->resources, &pci_io, sys->io_offset); + pci_add_resource_offset(&sys->resources, &pci_mem, sys->mem_offset); /* Assign and enable processor bridge */ ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA); diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index 37dfcd5bd2ad..ec783a3070ae 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <asm/mach/time.h> +#include <asm/system_misc.h> #include <mach/regs-timer.h> #include <mach/regs-irq.h> diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig index fde663508696..75946ac89ee9 100644 --- a/arch/arm/mach-lpc32xx/Kconfig +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -29,5 +29,30 @@ config ARCH_LPC32XX_UART6_SELECT endmenu +menu "LPC32XX chip components" + +config ARCH_LPC32XX_IRAM_FOR_NET + bool "Use IRAM for network buffers" + default y + help + Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as + network buffer. If the total combined required buffer sizes is + larger than the size of IRAM, then SDRAM will be used instead. + + This can be enabled safely if the IRAM is not intended for other + uses. + +config ARCH_LPC32XX_MII_SUPPORT + bool "Check to enable MII support or leave disabled for RMII support" + help + Say Y here to enable MII support, or N for RMII support. Regardless of + which support is selected, the ethernet interface driver needs to be + selected in the device driver networking section. + + The PHY3250 reference board uses RMII, so users of this board should + say N. + +endmenu + endif diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index 1e027514096d..b7ef51119d37 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -82,10 +82,12 @@ * will also impact the individual peripheral rates. */ +#include <linux/export.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/device.h> +#include <linux/delay.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/amba/bus.h> @@ -97,9 +99,12 @@ #include "clock.h" #include "common.h" +static DEFINE_SPINLOCK(global_clkregs_lock); + +static int usb_pll_enable, usb_pll_valid; + static struct clk clk_armpll; static struct clk clk_usbpll; -static DEFINE_MUTEX(clkm_lock); /* * Post divider values for PLLs based on selected register value @@ -127,7 +132,7 @@ static struct clk osc_32KHz = { static int local_pll397_enable(struct clk *clk, int enable) { u32 reg; - unsigned long timeout = 1 + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(10); reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL); @@ -142,7 +147,7 @@ static int local_pll397_enable(struct clk *clk, int enable) /* Wait for PLL397 lock */ while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) && - (timeout > jiffies)) + time_before(jiffies, timeout)) cpu_relax(); if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & @@ -156,7 +161,7 @@ static int local_pll397_enable(struct clk *clk, int enable) static int local_oscmain_enable(struct clk *clk, int enable) { u32 reg; - unsigned long timeout = 1 + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(10); reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL); @@ -171,7 +176,7 @@ static int local_oscmain_enable(struct clk *clk, int enable) /* Wait for main oscillator to start */ while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & LPC32XX_CLKPWR_MOSC_DISABLE) != 0) && - (timeout > jiffies)) + time_before(jiffies, timeout)) cpu_relax(); if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & @@ -382,30 +387,62 @@ static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup) static int local_usbpll_enable(struct clk *clk, int enable) { u32 reg; - int ret = -ENODEV; - unsigned long timeout = 1 + msecs_to_jiffies(10); + int ret = 0; + unsigned long timeout = jiffies + msecs_to_jiffies(20); reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - if (enable == 0) { - reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 | - LPC32XX_CLKPWR_USBCTRL_CLK_EN2); - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - } else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) { + __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 | + LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), + LPC32XX_CLKPWR_USB_CTRL); + __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1, + LPC32XX_CLKPWR_USB_CTRL); + + if (enable && usb_pll_valid && usb_pll_enable) { + ret = -ENODEV; + /* + * If the PLL rate has been previously set, then the rate + * in the PLL register is valid and can be enabled here. + * Otherwise, it needs to be enabled as part of setrate. + */ + + /* + * Gate clock into PLL + */ reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - /* Wait for PLL lock */ - while ((timeout > jiffies) & (ret == -ENODEV)) { + /* + * Enable PLL + */ + reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP; + __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + + /* + * Wait for PLL to lock + */ + while (time_before(jiffies, timeout) && (ret == -ENODEV)) { reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS) ret = 0; + else + udelay(10); } + /* + * Gate clock from PLL if PLL is locked + */ if (ret == 0) { - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2, + LPC32XX_CLKPWR_USB_CTRL); + } else { + __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 | + LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), + LPC32XX_CLKPWR_USB_CTRL); } + } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) { + usb_pll_valid = 0; + usb_pll_enable = 0; } return ret; @@ -423,7 +460,7 @@ static unsigned long local_usbpll_round_rate(struct clk *clk, */ rate = rate * 1000; - clkin = clk->parent->rate; + clkin = clk->get_rate(clk); usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; clkin = clkin / usbdiv; @@ -437,7 +474,8 @@ static unsigned long local_usbpll_round_rate(struct clk *clk, static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) { - u32 clkin, reg, usbdiv; + int ret = -ENODEV; + u32 clkin, usbdiv; struct clk_pll_setup pllsetup; /* @@ -446,7 +484,7 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) */ rate = rate * 1000; - clkin = clk->get_rate(clk); + clkin = clk->get_rate(clk->parent); usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; clkin = clkin / usbdiv; @@ -455,22 +493,25 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) return -EINVAL; + /* + * Disable PLL clocks during PLL change + */ local_usbpll_enable(clk, 0); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - pllsetup.analog_on = 1; + pllsetup.analog_on = 0; local_clk_usbpll_setup(&pllsetup); - clk->rate = clk_check_pll_setup(clkin, &pllsetup); + /* + * Start USB PLL and check PLL status + */ + + usb_pll_valid = 1; + usb_pll_enable = 1; - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + ret = local_usbpll_enable(clk, 1); + if (ret >= 0) + clk->rate = clk_check_pll_setup(clkin, &pllsetup); - return 0; + return ret; } static struct clk clk_usbpll = { @@ -719,6 +760,41 @@ static struct clk clk_tsc = { .get_rate = local_return_parent_rate, }; +static int adc_onoff_enable(struct clk *clk, int enable) +{ + u32 tmp; + u32 divider; + + /* Use PERIPH_CLOCK */ + tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); + tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; + /* + * Set clock divider so that we have equal to or less than + * 4.5MHz clock at ADC + */ + divider = clk->get_rate(clk) / 4500000 + 1; + tmp |= divider; + __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); + + /* synchronize rate of this clock w/ actual HW setting */ + clk->rate = clk->get_rate(clk->parent) / divider; + + if (enable == 0) + __raw_writel(0, clk->enable_reg); + else + __raw_writel(clk->enable_mask, clk->enable_reg); + + return 0; +} + +static struct clk clk_adc = { + .parent = &clk_pclk, + .enable = adc_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, + .get_rate = local_return_parent_rate, +}; + static int mmc_onoff_enable(struct clk *clk, int enable) { u32 tmp; @@ -891,20 +967,8 @@ static struct clk clk_lcd = { .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN, }; -static inline void clk_lock(void) -{ - mutex_lock(&clkm_lock); -} - -static inline void clk_unlock(void) -{ - mutex_unlock(&clkm_lock); -} - static void local_clk_disable(struct clk *clk) { - WARN_ON(clk->usecount == 0); - /* Don't attempt to disable clock if it has no users */ if (clk->usecount > 0) { clk->usecount--; @@ -947,10 +1011,11 @@ static int local_clk_enable(struct clk *clk) int clk_enable(struct clk *clk) { int ret; + unsigned long flags; - clk_lock(); + spin_lock_irqsave(&global_clkregs_lock, flags); ret = local_clk_enable(clk); - clk_unlock(); + spin_unlock_irqrestore(&global_clkregs_lock, flags); return ret; } @@ -961,9 +1026,11 @@ EXPORT_SYMBOL(clk_enable); */ void clk_disable(struct clk *clk) { - clk_lock(); + unsigned long flags; + + spin_lock_irqsave(&global_clkregs_lock, flags); local_clk_disable(clk); - clk_unlock(); + spin_unlock_irqrestore(&global_clkregs_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -972,13 +1039,7 @@ EXPORT_SYMBOL(clk_disable); */ unsigned long clk_get_rate(struct clk *clk) { - unsigned long rate; - - clk_lock(); - rate = clk->get_rate(clk); - clk_unlock(); - - return rate; + return clk->get_rate(clk); } EXPORT_SYMBOL(clk_get_rate); @@ -994,11 +1055,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate) * the actual rate set as part of the peripheral dividers * instead of high level clock control */ - if (clk->set_rate) { - clk_lock(); + if (clk->set_rate) ret = clk->set_rate(clk, rate); - clk_unlock(); - } return ret; } @@ -1009,15 +1067,11 @@ EXPORT_SYMBOL(clk_set_rate); */ long clk_round_rate(struct clk *clk, unsigned long rate) { - clk_lock(); - if (clk->round_rate) rate = clk->round_rate(clk, rate); else rate = clk->get_rate(clk); - clk_unlock(); - return rate; } EXPORT_SYMBOL(clk_round_rate); @@ -1075,10 +1129,11 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1) _REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan) _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand) - _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0) - _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1) + _REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc) + _REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0) + _REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1) _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc) - _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc) + _REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc) _REGISTER_CLOCK("lpc-net.0", NULL, clk_net) _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd) _REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd) diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 369b152896cd..bbbf063a74c2 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -138,6 +138,75 @@ struct platform_device lpc32xx_rtc_device = { }; /* + * ADC support + */ +static struct resource adc_resources[] = { + { + .start = LPC32XX_ADC_BASE, + .end = LPC32XX_ADC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_LPC32XX_TS_IRQ, + .end = IRQ_LPC32XX_TS_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device lpc32xx_adc_device = { + .name = "lpc32xx-adc", + .id = -1, + .num_resources = ARRAY_SIZE(adc_resources), + .resource = adc_resources, +}; + +/* + * USB support + */ +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32) 0; +static struct resource ohci_resources[] = { + { + .start = IO_ADDRESS(LPC32XX_USB_BASE), + .end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1), + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_LPC32XX_USB_HOST, + .flags = IORESOURCE_IRQ, + }, +}; +struct platform_device lpc32xx_ohci_device = { + .name = "usb-ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xFFFFFFFF, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +/* + * Network Support + */ +static struct resource net_resources[] = { + [0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K), + [1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K), + [2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET), +}; + +static u64 lpc32xx_mac_dma_mask = 0xffffffffUL; +struct platform_device lpc32xx_net_device = { + .name = "lpc-eth", + .id = 0, + .dev = { + .dma_mask = &lpc32xx_mac_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(net_resources), + .resource = net_resources, +}; + +/* * Returns the unique ID for the device */ void lpc32xx_get_uid(u32 devid[4]) diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 4b4e700343c1..68e45e8c9486 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -19,6 +19,7 @@ #ifndef __LPC32XX_COMMON_H #define __LPC32XX_COMMON_H +#include <mach/board.h> #include <linux/platform_device.h> /* @@ -29,7 +30,10 @@ extern struct platform_device lpc32xx_i2c0_device; extern struct platform_device lpc32xx_i2c1_device; extern struct platform_device lpc32xx_i2c2_device; extern struct platform_device lpc32xx_tsc_device; +extern struct platform_device lpc32xx_adc_device; extern struct platform_device lpc32xx_rtc_device; +extern struct platform_device lpc32xx_ohci_device; +extern struct platform_device lpc32xx_net_device; /* * Other arch specific structures and functions @@ -65,9 +69,7 @@ extern u32 clk_get_pclk_div(void); */ extern void lpc32xx_get_uid(u32 devid[4]); -extern void lpc32xx_watchdog_reset(void); extern u32 lpc32xx_return_iram_size(void); - /* * Pointers used for sizing and copying suspend function data */ diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/board.h index bf176c991520..52531ca7bd1d 100644 --- a/arch/arm/mach-lpc32xx/include/mach/system.h +++ b/arch/arm/mach-lpc32xx/include/mach/board.h @@ -1,5 +1,5 @@ /* - * arch/arm/mach-lpc32xx/include/mach/system.h + * arm/arch/mach-lpc32xx/include/mach/board.h * * Author: Kevin Wells <kevin.wells@nxp.com> * @@ -16,12 +16,9 @@ * GNU General Public License for more details. */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H +#ifndef __ASM_ARCH_BOARD_H +#define __ASM_ARCH_BOARD_H -static void arch_idle(void) -{ - cpu_do_idle(); -} +extern u32 lpc32xx_return_iram_size(void); -#endif +#endif /* __ASM_ARCH_BOARD_H */ diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S index b725f6c93975..24ca11b377c8 100644 --- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S @@ -21,16 +21,10 @@ #define LPC32XX_INTC_MASKED_STATUS_OFS 0x8 - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp ldr \base, =IO_ADDRESS(LPC32XX_MIC_BASE) .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - /* * Return IRQ number in irqnr. Also return processor Z flag status in CPSR * as set if an interrupt is pending. diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h index 14ea8d1aadb5..c584f5bb164f 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -591,42 +591,42 @@ /* * Timer/counter register offsets */ -#define LCP32XX_TIMER_IR(x) io_p2v((x) + 0x00) -#define LCP32XX_TIMER_TCR(x) io_p2v((x) + 0x04) -#define LCP32XX_TIMER_TC(x) io_p2v((x) + 0x08) -#define LCP32XX_TIMER_PR(x) io_p2v((x) + 0x0C) -#define LCP32XX_TIMER_PC(x) io_p2v((x) + 0x10) -#define LCP32XX_TIMER_MCR(x) io_p2v((x) + 0x14) -#define LCP32XX_TIMER_MR0(x) io_p2v((x) + 0x18) -#define LCP32XX_TIMER_MR1(x) io_p2v((x) + 0x1C) -#define LCP32XX_TIMER_MR2(x) io_p2v((x) + 0x20) -#define LCP32XX_TIMER_MR3(x) io_p2v((x) + 0x24) -#define LCP32XX_TIMER_CCR(x) io_p2v((x) + 0x28) -#define LCP32XX_TIMER_CR0(x) io_p2v((x) + 0x2C) -#define LCP32XX_TIMER_CR1(x) io_p2v((x) + 0x30) -#define LCP32XX_TIMER_CR2(x) io_p2v((x) + 0x34) -#define LCP32XX_TIMER_CR3(x) io_p2v((x) + 0x38) -#define LCP32XX_TIMER_EMR(x) io_p2v((x) + 0x3C) -#define LCP32XX_TIMER_CTCR(x) io_p2v((x) + 0x70) +#define LPC32XX_TIMER_IR(x) io_p2v((x) + 0x00) +#define LPC32XX_TIMER_TCR(x) io_p2v((x) + 0x04) +#define LPC32XX_TIMER_TC(x) io_p2v((x) + 0x08) +#define LPC32XX_TIMER_PR(x) io_p2v((x) + 0x0C) +#define LPC32XX_TIMER_PC(x) io_p2v((x) + 0x10) +#define LPC32XX_TIMER_MCR(x) io_p2v((x) + 0x14) +#define LPC32XX_TIMER_MR0(x) io_p2v((x) + 0x18) +#define LPC32XX_TIMER_MR1(x) io_p2v((x) + 0x1C) +#define LPC32XX_TIMER_MR2(x) io_p2v((x) + 0x20) +#define LPC32XX_TIMER_MR3(x) io_p2v((x) + 0x24) +#define LPC32XX_TIMER_CCR(x) io_p2v((x) + 0x28) +#define LPC32XX_TIMER_CR0(x) io_p2v((x) + 0x2C) +#define LPC32XX_TIMER_CR1(x) io_p2v((x) + 0x30) +#define LPC32XX_TIMER_CR2(x) io_p2v((x) + 0x34) +#define LPC32XX_TIMER_CR3(x) io_p2v((x) + 0x38) +#define LPC32XX_TIMER_EMR(x) io_p2v((x) + 0x3C) +#define LPC32XX_TIMER_CTCR(x) io_p2v((x) + 0x70) /* * ir register definitions */ -#define LCP32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3)) -#define LCP32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3))) +#define LPC32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3)) +#define LPC32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3))) /* * tcr register definitions */ -#define LCP32XX_TIMER_CNTR_TCR_EN 0x1 -#define LCP32XX_TIMER_CNTR_TCR_RESET 0x2 +#define LPC32XX_TIMER_CNTR_TCR_EN 0x1 +#define LPC32XX_TIMER_CNTR_TCR_RESET 0x2 /* * mcr register definitions */ -#define LCP32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3)) -#define LCP32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1)) -#define LCP32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2)) +#define LPC32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3)) +#define LPC32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1)) +#define LPC32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2)) /* * Standard UART register offsets @@ -690,5 +690,8 @@ #define LPC32XX_GPIO_P1_MUX_SET _GPREG(0x130) #define LPC32XX_GPIO_P1_MUX_CLR _GPREG(0x134) #define LPC32XX_GPIO_P1_MUX_STATE _GPREG(0x138) +#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028) +#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) +#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) #endif diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index c74de01ab5b6..d080cb1123dd 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -150,6 +150,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT, }, + [IRQ_LPC32XX_ETHERNET] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_MAC_BIT, + }, [IRQ_LPC32XX_USB_OTG_ATX] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT, diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index bfee5b455105..7f7401ec7487 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -37,6 +37,7 @@ #include <mach/hardware.h> #include <mach/platform.h> +#include <mach/board.h> #include <mach/gpio-lpc32xx.h> #include "common.h" @@ -149,20 +150,8 @@ static struct clcd_board lpc32xx_clcd_data = { .remove = lpc32xx_clcd_remove, }; -static struct amba_device lpc32xx_clcd_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "dev:clcd", - .platform_data = &lpc32xx_clcd_data, - }, - .res = { - .start = LPC32XX_LCD_BASE, - .end = (LPC32XX_LCD_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = {IRQ_LPC32XX_LCD, NO_IRQ}, -}; +static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0, + LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data); /* * AMBA SSP (SPI) @@ -191,20 +180,8 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = { .enable_dma = 0, }; -static struct amba_device lpc32xx_ssp0_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "dev:ssp0", - .platform_data = &lpc32xx_ssp0_data, - }, - .res = { - .start = LPC32XX_SSP0_BASE, - .end = (LPC32XX_SSP0_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = {IRQ_LPC32XX_SSP0, NO_IRQ}, -}; +static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0, + LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data); /* AT25 driver registration */ static int __init phy3250_spi_board_register(void) @@ -271,11 +248,16 @@ static struct platform_device lpc32xx_gpio_led_device = { }; static struct platform_device *phy3250_devs[] __initdata = { + &lpc32xx_rtc_device, + &lpc32xx_tsc_device, &lpc32xx_i2c0_device, &lpc32xx_i2c1_device, &lpc32xx_i2c2_device, &lpc32xx_watchdog_device, &lpc32xx_gpio_led_device, + &lpc32xx_adc_device, + &lpc32xx_ohci_device, + &lpc32xx_net_device, }; static struct amba_device *amba_devs[] __initdata = { diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index b9c80597b7bf..207e81275ff0 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -13,7 +13,7 @@ /* * LPC32XX CPU and system power management * - * The LCP32XX has three CPU modes for controlling system power: run, + * The LPC32XX has three CPU modes for controlling system power: run, * direct-run, and halt modes. When switching between halt and run modes, * the CPU transistions through direct-run mode. For Linux, direct-run * mode is not used in normal operation. Halt mode is used when the diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c index b42c909bbeeb..c40667c33161 100644 --- a/arch/arm/mach-lpc32xx/timer.c +++ b/arch/arm/mach-lpc32xx/timer.c @@ -34,11 +34,11 @@ static int lpc32xx_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) { - __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET, - LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN, - LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, + LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, + LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); return 0; } @@ -58,7 +58,7 @@ static void lpc32xx_clkevt_mode(enum clock_event_mode mode, * disable the timer to wait for the first call to * set_next_event(). */ - __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); break; case CLOCK_EVT_MODE_UNUSED: @@ -81,8 +81,8 @@ static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &lpc32xx_clkevt; /* Clear match */ - __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0), - LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), + LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); evt->event_handler(evt); @@ -128,14 +128,14 @@ static void __init lpc32xx_timer_init(void) clkrate = clkrate / clk_get_pclk_div(); /* Initial timer setup */ - __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0), - LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - __raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) | - LCP32XX_TIMER_CNTR_MCR_STOP(0) | - LCP32XX_TIMER_CNTR_MCR_RESET(0), - LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); + __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), + LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); + __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) | + LPC32XX_TIMER_CNTR_MCR_STOP(0) | + LPC32XX_TIMER_CNTR_MCR_RESET(0), + LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); /* Setup tick interrupt */ setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq); @@ -151,14 +151,14 @@ static void __init lpc32xx_timer_init(void) clockevents_register_device(&lpc32xx_clkevt); /* Use timer1 as clock source. */ - __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET, - LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN, - LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - - clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE), + __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, + LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); + __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); + __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, + LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); + + clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE), "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up); } diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 323d4c9e9f44..5a90b9a3ab6e 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -2,6 +2,16 @@ if ARCH_MMP menu "Marvell PXA168/910/MMP2 Implmentations" +config MACH_MMP_DT + bool "Support MMP2 platforms from device tree" + select CPU_PXA168 + select CPU_PXA910 + select USE_OF + help + Include support for Marvell MMP2 based platforms using + the device tree. Needn't select any other machine while + MACH_MMP_DT is enabled. + config MACH_ASPENITE bool "Marvell's PXA168 Aspenite Development Board" select CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index ba254a71691a..4fc0ff5dc96d 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -18,5 +18,6 @@ obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o +obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o obj-$(CONFIG_MACH_GPLUGD) += gplugd.o diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 062b5b93c50e..9292b7966e3b 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -14,6 +14,7 @@ #include <asm/page.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/addr-map.h> #include <mach/cputype.h> diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S index c42d9d4e892d..9cff9e7a2b26 100644 --- a/arch/arm/mach-mmp/include/mach/entry-macro.S +++ b/arch/arm/mach-mmp/include/mach/entry-macro.S @@ -8,12 +8,6 @@ #include <mach/regs-icu.h> - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_preamble, base, tmp mrc p15, 0, \tmp, c0, c0, 0 @ CPUID and \tmp, \tmp, #0xff00 diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index 4de13abef7bb..e2e1f1e5e124 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -22,6 +22,7 @@ extern struct pxa_device_desc pxa910_device_pwm4; extern struct pxa_device_desc pxa910_device_nand; extern struct platform_device pxa910_device_gpio; +extern struct platform_device pxa910_device_rtc; static inline int pxa910_add_uart(int id) { diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h index 1a96585336ba..8a37fb003655 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -57,6 +57,7 @@ #define APBC_PXA910_SSP1 APBC_REG(0x01c) #define APBC_PXA910_SSP2 APBC_REG(0x020) #define APBC_PXA910_IPC APBC_REG(0x024) +#define APBC_PXA910_RTC APBC_REG(0x028) #define APBC_PXA910_TWSI0 APBC_REG(0x02c) #define APBC_PXA910_KPC APBC_REG(0x030) #define APBC_PXA910_TIMERS APBC_REG(0x034) diff --git a/arch/arm/mach-mmp/include/mach/regs-rtc.h b/arch/arm/mach-mmp/include/mach/regs-rtc.h new file mode 100644 index 000000000000..5bff886a3941 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-rtc.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_REGS_RTC_H +#define __ASM_MACH_REGS_RTC_H + +#include <mach/addr-map.h> + +#define RTC_VIRT_BASE (APB_VIRT_BASE + 0x10000) +#define RTC_REG(x) (*((volatile u32 __iomem *)(RTC_VIRT_BASE + (x)))) + +/* + * Real Time Clock + */ + +#define RCNR RTC_REG(0x00) /* RTC Count Register */ +#define RTAR RTC_REG(0x04) /* RTC Alarm Register */ +#define RTSR RTC_REG(0x08) /* RTC Status Register */ +#define RTTR RTC_REG(0x0C) /* RTC Timer Trim Register */ + +#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ +#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ +#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ +#define RTSR_AL (1 << 0) /* RTC alarm detected */ + +#endif /* __ASM_MACH_REGS_RTC_H */ diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h deleted file mode 100644 index 1d001eab81e1..000000000000 --- a/arch/arm/mach-mmp/include/mach/system.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_SYSTEM_H -#define __ASM_MACH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} -#endif /* __ASM_MACH_SYSTEM_H */ diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c new file mode 100644 index 000000000000..67075395e400 --- /dev/null +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -0,0 +1,75 @@ +/* + * linux/arch/arm/mach-mmp/mmp-dt.c + * + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <mach/irqs.h> + +#include "common.h" + +extern struct sys_timer pxa168_timer; +extern void __init icu_init_irq(void); + +static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL), + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL), + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL), + OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), + OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), + OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), + {} +}; + +static int __init mmp_intc_add_irq_domain(struct device_node *np, + struct device_node *parent) +{ + irq_domain_add_simple(np, 0); + return 0; +} + +static int __init mmp_gpio_add_irq_domain(struct device_node *np, + struct device_node *parent) +{ + irq_domain_add_simple(np, IRQ_GPIO_START); + return 0; +} + +static const struct of_device_id mmp_irq_match[] __initconst = { + { .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, }, + { .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, }, + {} +}; + +static void __init mmp_dt_init(void) +{ + + of_irq_init(mmp_irq_match); + + of_platform_populate(NULL, of_default_bus_match_table, + mmp_auxdata_lookup, NULL); +} + +static const char *pxa168_dt_board_compat[] __initdata = { + "mrvl,pxa168-aspenite", + NULL, +}; + +DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)") + .map_io = mmp_map_io, + .init_irq = icu_init_irq, + .timer = &pxa168_timer, + .init_machine = mmp_dt_init, + .dt_compat = pxa168_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 617c60a170a4..c709a24a9d25 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -223,6 +223,7 @@ struct resource mmp2_resource_gpio[] = { }, { .start = IRQ_MMP2_GPIO, .end = IRQ_MMP2_GPIO, + .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index ada1213982b4..b24d2c32cba9 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <asm/mach/time.h> +#include <asm/system_misc.h> #include <mach/addr-map.h> #include <mach/cputype.h> #include <mach/regs-apbc.h> @@ -64,6 +65,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000); static APBC_CLK(keypad, PXA168_KPC, 0, 32000); +static APBC_CLK(rtc, PXA168_RTC, 8, 32768); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); @@ -92,6 +94,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"), + INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; static int __init pxa168_init(void) @@ -166,6 +169,7 @@ struct resource pxa168_resource_gpio[] = { }, { .start = IRQ_PXA168_GPIOX, .end = IRQ_PXA168_GPIOX, + .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 3241a25784d0..43f8bcc29b67 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -92,6 +92,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000); +static APBC_CLK(rtc, PXA910_RTC, 8, 32768); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(u2o, USB, 0x1b, 480000000); @@ -109,6 +110,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"), + INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; static int __init pxa910_init(void) @@ -173,6 +175,7 @@ struct resource pxa910_resource_gpio[] = { }, { .start = IRQ_PXA910_AP_GPIO, .end = IRQ_PXA910_AP_GPIO, + .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; @@ -183,3 +186,28 @@ struct platform_device pxa910_device_gpio = { .num_resources = ARRAY_SIZE(pxa910_resource_gpio), .resource = pxa910_resource_gpio, }; + +static struct resource pxa910_resource_rtc[] = { + { + .start = 0xd4010000, + .end = 0xd401003f, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PXA910_RTC_INT, + .end = IRQ_PXA910_RTC_INT, + .name = "rtc 1Hz", + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_PXA910_RTC_ALARM, + .end = IRQ_PXA910_RTC_ALARM, + .name = "rtc alarm", + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa910_device_rtc = { + .name = "sa1100-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(pxa910_resource_rtc), + .resource = pxa910_resource_rtc, +}; diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 5ac5d5832e45..e72c709da44f 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -124,6 +124,7 @@ static struct platform_device ttc_dkb_device_onenand = { static struct platform_device *ttc_dkb_devices[] = { &pxa910_device_gpio, + &pxa910_device_rtc, &ttc_dkb_device_onenand, }; diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 97b8191d9d38..4a8ea0d40b6f 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <asm/system.h> #include <mach/system.h> #include <mach/vreg.h> #include <mach/board.h> diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S deleted file mode 100644 index 6a94f0527137..000000000000 --- a/arch/arm/mach-msm/idle.S +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/mach-msm/include/mach/idle.S - * - * Idle processing for MSM7K - work around bugs with SWFI. - * - * Copyright (c) 2007 QUALCOMM Incorporated. - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - -ENTRY(arch_idle) -#ifdef CONFIG_MSM7X00A_IDLE - mrc p15, 0, r1, c1, c0, 0 /* read current CR */ - bic r0, r1, #(1 << 2) /* clear dcache bit */ - bic r0, r0, #(1 << 12) /* clear icache bit */ - mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ - - mov r0, #0 /* prepare wfi value */ - mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ - mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ - mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ - - mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ -#endif - mov pc, lr diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c new file mode 100644 index 000000000000..0c9e13c65743 --- /dev/null +++ b/arch/arm/mach-msm/idle.c @@ -0,0 +1,49 @@ +/* arch/arm/mach-msm/idle.c + * + * Idle processing for MSM7K - work around bugs with SWFI. + * + * Copyright (c) 2007 QUALCOMM Incorporated. + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <asm/system.h> + +static void msm_idle(void) +{ +#ifdef CONFIG_MSM7X00A_IDLE + asm volatile ( + + "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t" + "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t" + "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t" + "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t" + + "mov r0, #0 /* prepare wfi value */ \n\t" + "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t" + "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t" + "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t" + + "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t" + + : : : "r0","r1" ); +#endif +} + +static int __init msm_idle_init(void) +{ + arm_pm_idle = msm_idle; + return 0; +} + +arch_initcall(msm_idle_init); diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S index 41f7003ef34f..f2ae9087f654 100644 --- a/arch/arm/mach-msm/include/mach/entry-macro.S +++ b/arch/arm/mach-msm/include/mach/entry-macro.S @@ -16,12 +16,6 @@ * */ - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - #if !defined(CONFIG_ARM_GIC) #include <mach/msm_iomap.h> diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h index 311db2b35da0..f5fb2ec87ffe 100644 --- a/arch/arm/mach-msm/include/mach/system.h +++ b/arch/arm/mach-msm/include/mach/system.h @@ -12,7 +12,6 @@ * GNU General Public License for more details. * */ -void arch_idle(void); /* low level hardware reset hook -- for example, hitting the * PSHOLD line on the PMIC to hard reset the system diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 11d0d8f2656c..75f4be40b3e5 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -127,6 +127,45 @@ static struct clocksource msm_clocksource = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +#ifdef CONFIG_LOCAL_TIMERS +static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt) +{ + /* Use existing clock_event for cpu 0 */ + if (!smp_processor_id()) + return 0; + + writel_relaxed(0, event_base + TIMER_ENABLE); + writel_relaxed(0, event_base + TIMER_CLEAR); + writel_relaxed(~0, event_base + TIMER_MATCH_VAL); + evt->irq = msm_clockevent.irq; + evt->name = "local_timer"; + evt->features = msm_clockevent.features; + evt->rating = msm_clockevent.rating; + evt->set_mode = msm_timer_set_mode; + evt->set_next_event = msm_timer_set_next_event; + evt->shift = msm_clockevent.shift; + evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt); + evt->min_delta_ns = clockevent_delta2ns(4, evt); + + *__this_cpu_ptr(msm_evt.percpu_evt) = evt; + clockevents_register_device(evt); + enable_percpu_irq(evt->irq, 0); + return 0; +} + +static void msm_local_timer_stop(struct clock_event_device *evt) +{ + evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); + disable_percpu_irq(evt->irq); +} + +static struct local_timer_ops msm_local_timer_ops __cpuinitdata = { + .setup = msm_local_timer_setup, + .stop = msm_local_timer_stop, +}; +#endif /* CONFIG_LOCAL_TIMERS */ + static void __init msm_timer_init(void) { struct clock_event_device *ce = &msm_clockevent; @@ -173,8 +212,12 @@ static void __init msm_timer_init(void) *__this_cpu_ptr(msm_evt.percpu_evt) = ce; res = request_percpu_irq(ce->irq, msm_timer_interrupt, ce->name, msm_evt.percpu_evt); - if (!res) + if (!res) { enable_percpu_irq(ce->irq, 0); +#ifdef CONFIG_LOCAL_TIMERS + local_timer_register(&msm_local_timer_ops); +#endif + } } else { msm_evt.evt = ce; res = request_irq(ce->irq, msm_timer_interrupt, @@ -191,40 +234,6 @@ err: pr_err("clocksource_register failed\n"); } -#ifdef CONFIG_LOCAL_TIMERS -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - /* Use existing clock_event for cpu 0 */ - if (!smp_processor_id()) - return 0; - - writel_relaxed(0, event_base + TIMER_ENABLE); - writel_relaxed(0, event_base + TIMER_CLEAR); - writel_relaxed(~0, event_base + TIMER_MATCH_VAL); - evt->irq = msm_clockevent.irq; - evt->name = "local_timer"; - evt->features = msm_clockevent.features; - evt->rating = msm_clockevent.rating; - evt->set_mode = msm_timer_set_mode; - evt->set_next_event = msm_timer_set_next_event; - evt->shift = msm_clockevent.shift; - evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift); - evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt); - evt->min_delta_ns = clockevent_delta2ns(4, evt); - - *__this_cpu_ptr(msm_evt.percpu_evt) = evt; - clockevents_register_device(evt); - enable_percpu_irq(evt->irq, 0); - return 0; -} - -void local_timer_stop(struct clock_event_device *evt) -{ - evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); - disable_percpu_irq(evt->irq); -} -#endif /* CONFIG_LOCAL_TIMERS */ - struct sys_timer msm_timer = { .init = msm_timer_init }; diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S index 66ae2d29e773..6b1f088e0597 100644 --- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S @@ -10,12 +10,6 @@ #include <mach/bridge-regs.h> - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_preamble, base, tmp ldr \base, =IRQ_VIRT_BASE .endm diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h deleted file mode 100644 index 8c3a5387cec7..000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 8459f6d7d8ca..df3e38055a24 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -155,8 +155,8 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys) orion_pcie_set_local_bus_nr(pp->base, sys->busnr); orion_pcie_setup(pp->base); - pci_add_resource(&sys->resources, &pp->res[0]); - pci_add_resource(&sys->resources, &pp->res[1]); + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index cf00b3e3be85..c57f9964a713 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -83,6 +83,18 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP +config MODULE_APX4 + bool + select SOC_IMX28 + select LEDS_GPIO_REGISTER + select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_FEC + select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_MMC + select MXS_HAVE_PLATFORM_MXS_SAIF + select MXS_OCOTP + config MACH_TX28 bool "Ka-Ro TX28 module" select MODULE_TX28 @@ -91,4 +103,8 @@ config MACH_M28EVK bool "Support DENX M28EVK Platform" select MODULE_M28 +config MACH_APX4DEVKIT + bool "Support Bluegiga APX4 Development Kit" + select MODULE_APX4 + endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 8c93b24896bf..908bf9a567f1 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o +obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o obj-$(CONFIG_MODULE_TX28) += module-tx28.o obj-$(CONFIG_MACH_TX28) += mach-tx28.o diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index e12e11231dc7..e3ac52c34019 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -223,7 +223,6 @@ static int cpu_clk_set_rate(struct clk *clk, unsigned long rate) { u32 reg, bm_busy, div_max, d, f, div, frac; unsigned long diff, parent_rate, calc_rate; - int i; parent_rate = clk_get_rate(clk->parent); @@ -275,14 +274,7 @@ static int cpu_clk_set_rate(struct clk *clk, unsigned long rate) reg |= div << BP_CLKCTRL_CPU_DIV_CPU; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); - for (i = 10000; i; i--) - if (!(__raw_readl(CLKCTRL_BASE_ADDR + - HW_CLKCTRL_CPU) & bm_busy)) - break; - if (!i) { - pr_err("%s: divider writing timeout\n", __func__); - return -ETIMEDOUT; - } + mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy); return 0; } @@ -292,7 +284,6 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ { \ u32 reg, div_max, div; \ unsigned long parent_rate; \ - int i; \ \ parent_rate = clk_get_rate(clk->parent); \ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ @@ -310,15 +301,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ - for (i = 10000; i; i--) \ - if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ - HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \ - break; \ - if (!i) { \ - pr_err("%s: divider writing timeout\n", __func__); \ - return -ETIMEDOUT; \ - } \ - \ + mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY); \ return 0; \ } @@ -456,12 +439,13 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) _REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk) + _REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk) }; static int clk_misc_init(void) { u32 reg; - int i; + int ret; /* Fix up parent per register setting */ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ); @@ -510,14 +494,7 @@ static int clk_misc_init(void) reg |= 3 << BP_CLKCTRL_HBUS_DIV; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - for (i = 10000; i; i--) - if (!(__raw_readl(CLKCTRL_BASE_ADDR + - HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_BUSY)) - break; - if (!i) { - pr_err("%s: divider writing timeout\n", __func__); - return -ETIMEDOUT; - } + ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY); /* Gate off cpu clock in WFI for power saving */ __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, @@ -532,7 +509,7 @@ static int clk_misc_init(void) reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - return 0; + return ret; } int __init mx23_clocks_init(void) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 5d68e4152220..cea29c99e214 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -322,7 +322,6 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ { \ u32 reg, bm_busy, div_max, d, f, div, frac; \ unsigned long diff, parent_rate, calc_rate; \ - int i; \ \ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ bm_busy = BM_CLKCTRL_##dr##_BUSY; \ @@ -396,16 +395,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ - for (i = 10000; i; i--) \ - if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ - HW_CLKCTRL_##dr) & bm_busy)) \ - break; \ - if (!i) { \ - pr_err("%s: divider writing timeout\n", __func__); \ - return -ETIMEDOUT; \ - } \ - \ - return 0; \ + return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy); \ } _CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU) @@ -421,7 +411,6 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ { \ u32 reg, div_max, div; \ unsigned long parent_rate; \ - int i; \ \ parent_rate = clk_get_rate(clk->parent); \ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ @@ -439,16 +428,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ - for (i = 10000; i; i--) \ - if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ - HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \ - break; \ - if (!i) { \ - pr_err("%s: divider writing timeout\n", __func__); \ - return -ETIMEDOUT; \ - } \ - \ - return 0; \ + return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\ } _CLK_SET_RATE1(xbus_clk, XBUS) @@ -461,7 +441,6 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ u32 reg; \ u64 lrate; \ unsigned long parent_rate; \ - int i; \ \ parent_rate = clk_get_rate(clk->parent); \ if (rate > parent_rate) \ @@ -477,18 +456,13 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ reg &= ~BM_CLKCTRL_##rs##_DIV; \ reg |= div << BP_CLKCTRL_##rs##_DIV; \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - \ - for (i = 10000; i; i--) \ - if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ - HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY)) \ - break; \ - if (!i) { \ - pr_err("%s: divider writing timeout\n", __func__); \ - return -ETIMEDOUT; \ + if (reg & (1 << clk->enable_shift)) { \ + pr_err("%s: clock is gated\n", __func__); \ + return -EINVAL; \ } \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ \ - return 0; \ + return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\ } _CLK_SET_RATE_SAIF(saif0_clk, SAIF0) @@ -643,6 +617,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) + _REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk) _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) _REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk) _REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk) @@ -654,6 +629,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk) _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk) + _REGISTER_CLOCK("mxs-mmc.2", NULL, ssp2_clk) + _REGISTER_CLOCK("mxs-mmc.3", NULL, ssp3_clk) _REGISTER_CLOCK("flexcan.0", NULL, can0_clk) _REGISTER_CLOCK("flexcan.1", NULL, can1_clk) _REGISTER_CLOCK(NULL, "usb0", usb0_clk) @@ -676,7 +653,7 @@ static struct clk_lookup lookups[] = { static int clk_misc_init(void) { u32 reg; - int i; + int ret; /* Fix up parent per register setting */ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ); @@ -756,14 +733,7 @@ static int clk_misc_init(void) reg |= 3 << BP_CLKCTRL_HBUS_DIV; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - for (i = 10000; i; i--) - if (!(__raw_readl(CLKCTRL_BASE_ADDR + - HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY)) - break; - if (!i) { - pr_err("%s: divider writing timeout\n", __func__); - return -ETIMEDOUT; - } + ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_ASM_BUSY); /* Gate off cpu clock in WFI for power saving */ __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, @@ -790,7 +760,7 @@ static int clk_misc_init(void) reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0); - return 0; + return ret; } int __init mx28_clocks_init(void) @@ -803,6 +773,8 @@ int __init mx28_clocks_init(void) */ clk_set_parent(&ssp0_clk, &ref_io0_clk); clk_set_parent(&ssp1_clk, &ref_io0_clk); + clk_set_parent(&ssp2_clk, &ref_io1_clk); + clk_set_parent(&ssp3_clk, &ref_io1_clk); clk_prepare_enable(&cpu_clk); clk_prepare_enable(&hbus_clk); diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index 3fa651d2c994..4d1329d59287 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -21,6 +21,10 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst; #define mx23_add_auart0() mx23_add_auart(0) #define mx23_add_auart1() mx23_add_auart(1) +extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst; +#define mx23_add_gpmi_nand(pdata) \ + mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data) + extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst; #define mx23_add_mxs_mmc(id, pdata) \ mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 4f50094e293d..9dbeae130842 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -34,6 +34,10 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; #define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata) #define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata) +extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst; +#define mx28_add_gpmi_nand(pdata) \ + mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data) + extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst; #define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id]) diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index fe3e847930c9..01faffec3064 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -77,16 +77,18 @@ err: int __init mxs_add_amba_device(const struct amba_device *dev) { - struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL); + struct amba_device *adev = amba_device_alloc(dev->dev.init_name, + dev->res.start, resource_size(&dev->res)); if (!adev) { pr_err("%s: failed to allocate memory", __func__); return -ENOMEM; } - *adev = *dev; + adev->irq[0] = dev->irq[0]; + adev->irq[1] = dev->irq[1]; - return amba_device_register(adev, &iomem_resource); + return amba_device_add(adev, &iomem_resource); } struct device mxs_apbh_bus = { diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index 18b6bf526a27..b8913df4cfa2 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -12,6 +12,9 @@ config MXS_HAVE_PLATFORM_FLEXCAN select HAVE_CAN_FLEXCAN if CAN bool +config MXS_HAVE_PLATFORM_GPMI_NAND + bool + config MXS_HAVE_PLATFORM_MXS_I2C bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index f52e3e53baec..c8f5c9541a30 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o obj-y += platform-dma.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c index a559db09b49c..a5479f766046 100644 --- a/arch/arm/mach-mxs/devices/amba-duart.c +++ b/arch/arm/mach-mxs/devices/amba-duart.c @@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = { \ .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ .flags = IORESOURCE_MEM, \ }, \ - .irq = {soc ## _INT_DUART, NO_IRQ}, \ + .irq = {soc ## _INT_DUART}, \ } #ifdef CONFIG_SOC_IMX23 diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c new file mode 100644 index 000000000000..3e22df5944a8 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#include <asm/sizes.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> +#include <linux/dma-mapping.h> + +#ifdef CONFIG_SOC_IMX23 +const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = { + .devid = "imx23-gpmi-nand", + .res = { + /* GPMI */ + DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K, + GPMI_NAND_GPMI_REGS_ADDR_RES_NAME), + DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION, + GPMI_NAND_GPMI_INTERRUPT_RES_NAME), + /* BCH */ + DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K, + GPMI_NAND_BCH_REGS_ADDR_RES_NAME), + DEFINE_RES_IRQ_NAMED(MX23_INT_BCH, + GPMI_NAND_BCH_INTERRUPT_RES_NAME), + /* DMA */ + DEFINE_RES_NAMED(MX23_DMA_GPMI0, + MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1, + GPMI_NAND_DMA_CHANNELS_RES_NAME, + IORESOURCE_DMA), + DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA, + GPMI_NAND_DMA_INTERRUPT_RES_NAME), + }, +}; +#endif + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = { + .devid = "imx28-gpmi-nand", + .res = { + /* GPMI */ + DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K, + GPMI_NAND_GPMI_REGS_ADDR_RES_NAME), + DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI, + GPMI_NAND_GPMI_INTERRUPT_RES_NAME), + /* BCH */ + DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K, + GPMI_NAND_BCH_REGS_ADDR_RES_NAME), + DEFINE_RES_IRQ_NAMED(MX28_INT_BCH, + GPMI_NAND_BCH_INTERRUPT_RES_NAME), + /* DMA */ + DEFINE_RES_NAMED(MX28_DMA_GPMI0, + MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1, + GPMI_NAND_DMA_CHANNELS_RES_NAME, + IORESOURCE_DMA), + DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA, + GPMI_NAND_DMA_INTERRUPT_RES_NAME), + }, +}; +#endif + +struct platform_device *__init +mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata, + const struct mxs_gpmi_nand_data *data) +{ + return mxs_add_platform_device_dmamask(data->devid, -1, + data->res, GPMI_NAND_RES_SIZE, + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); +} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c index 382dacbeca21..bef9d923f54e 100644 --- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c +++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c @@ -41,6 +41,8 @@ const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = { const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = { mxs_mxs_mmc_data_entry(MX28, 0, 0), mxs_mxs_mmc_data_entry(MX28, 1, 1), + mxs_mxs_mmc_data_entry(MX28, 2, 2), + mxs_mxs_mmc_data_entry(MX28, 3, 3), }; #endif diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index e1237ab25862..c50c3ea28a9d 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -31,4 +31,6 @@ extern void mx28_init_irq(void); extern void icoll_init_irq(void); +extern int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask); + #endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index dc369c1239fc..f2e383955d88 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -66,6 +66,16 @@ struct platform_device *__init mxs_add_flexcan( const struct mxs_flexcan_data *data, const struct flexcan_platform_data *pdata); +/* gpmi-nand */ +#include <linux/mtd/gpmi-nand.h> +struct mxs_gpmi_nand_data { + const char *devid; + const struct resource res[GPMI_NAND_RES_SIZE]; +}; +struct platform_device *__init +mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata, + const struct mxs_gpmi_nand_data *data); + /* i2c */ struct mxs_mxs_i2c_data { int id; diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h index 49a888c65d6d..17964066303f 100644 --- a/arch/arm/mach-mxs/include/mach/digctl.h +++ b/arch/arm/mach-mxs/include/mach/digctl.h @@ -18,4 +18,5 @@ #define HW_DIGCTL_CTRL 0x0 #define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 #define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) +#define HW_DIGCTL_CHIPID 0x310 #endif diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/mach-mxs/include/mach/entry-macro.S index 9f0da12e657a..0c14259705b9 100644 --- a/arch/arm/mach-mxs/include/mach/entry-macro.S +++ b/arch/arm/mach-mxs/include/mach/entry-macro.S @@ -23,9 +23,6 @@ #define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR) #define HW_ICOLL_STAT_OFFSET 0x70 - .macro disable_fiq - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET] cmp \irqnr, #0x7F @@ -36,6 +33,3 @@ .macro get_irqnr_preamble, base, tmp ldr \base, =MXS_ICOLL_VBASE .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index bde5f6634747..7d4fb6d0afda 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -23,22 +23,10 @@ #include <linux/io.h> #endif #include <asm/mach-types.h> +#include <mach/digctl.h> #include <mach/hardware.h> /* - * MXS CPU types - */ -#define cpu_is_mx23() ( \ - machine_is_mx23evk() || \ - machine_is_stmp378x() || \ - 0) -#define cpu_is_mx28() ( \ - machine_is_mx28evk() || \ - machine_is_m28evk() || \ - machine_is_tx28() || \ - 0) - -/* * IO addresses common to MXS-based */ #define MXS_IO_BASE_ADDR 0x80000000 @@ -109,6 +97,21 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_TOG_ADDR); } + +/* + * MXS CPU types + */ +#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) + +static inline int cpu_is_mx23(void) +{ + return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); +} + +static inline int cpu_is_mx28(void) +{ + return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); +} #endif #endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h deleted file mode 100644 index e7ad1bb29423..000000000000 --- a/arch/arm/mach-mxs/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MXS_SYSTEM_H__ -#define __MACH_MXS_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __MACH_MXS_SYSTEM_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h index 67776746f143..ef2811495446 100644 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -18,8 +18,6 @@ #ifndef __MACH_MXS_UNCOMPRESS_H__ #define __MACH_MXS_UNCOMPRESS_H__ -#include <asm/mach-types.h> - unsigned long mxs_duart_base; #define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) @@ -55,16 +53,17 @@ static inline void flush(void) #define MX23_DUART_BASE_ADDR 0x80070000 #define MX28_DUART_BASE_ADDR 0x80074000 +#define MXS_DIGCTL_CHIPID 0x8001c310 static inline void __arch_decomp_setup(unsigned long arch_id) { - switch (arch_id) { - case MACH_TYPE_MX23EVK: + u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16; + + switch (chipid) { + case 0x3780: mxs_duart_base = MX23_DUART_BASE_ADDR; break; - case MACH_TYPE_MX28EVK: - case MACH_TYPE_M28EVK: - case MACH_TYPE_TX28: + case 0x2800: mxs_duart_base = MX28_DUART_BASE_ADDR; break; default: diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c new file mode 100644 index 000000000000..48a7fab571a6 --- /dev/null +++ b/arch/arm/mach-mxs/mach-apx4devkit.c @@ -0,0 +1,260 @@ +/* + * Copyright (C) 2011-2012 + * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com> + * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com> + * + * based on: mach-mx28evk.c + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/micrel_phy.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/digctl.h> +#include <mach/iomux-mx28.h> + +#include "devices-mx28.h" + +#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28) + +static const iomux_cfg_t apx4devkit_pads[] __initconst = { + /* duart */ + MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, + MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, + + /* auart0 */ + MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, + MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, + MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, + MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, + + /* auart1 */ + MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, + MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, + + /* auart2 */ + MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL, + MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL, + + /* auart3 */ + MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL, + MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL, + +#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) + /* fec0 */ + MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, + + /* i2c */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* mmc0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* led */ + MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, + + /* saif0 & saif1 */ + MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), +}; + +/* led */ +static const struct gpio_led apx4devkit_leds[] __initconst = { + { + .name = "user-led", + .default_trigger = "heartbeat", + .gpio = APX4DEVKIT_GPIO_USERLED, + }, +}; + +static const struct gpio_led_platform_data apx4devkit_led_data __initconst = { + .leds = apx4devkit_leds, + .num_leds = ARRAY_SIZE(apx4devkit_leds), +}; + +static const struct fec_platform_data mx28_fec_pdata __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = { + .wp_gpio = -EINVAL, + .flags = SLOTF_4_BIT_CAPABLE, +}; + +static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = { + { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */ + { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */ +}; + +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \ + defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("VDDA", "0-000a"), + REGULATOR_SUPPLY("VDDIO", "0-000a"), +}; + +static struct regulator_init_data apx4devkit_vdd_reg_init_data = { + .constraints = { + .name = "3V3", + .always_on = 1, + }, + .consumer_supplies = apx4devkit_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies), +}; + +static struct fixed_voltage_config apx4devkit_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 1, + .init_data = &apx4devkit_vdd_reg_init_data, +}; + +static struct platform_device apx4devkit_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &apx4devkit_vdd_pdata, + }, +}; + +static void __init apx4devkit_add_regulators(void) +{ + platform_device_register(&apx4devkit_voltage_regulator); +} +#else +static void __init apx4devkit_add_regulators(void) {} +#endif + +static const struct mxs_saif_platform_data + apx4devkit_mxs_saif_pdata[] __initconst = { + /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ + { + .master_mode = 1, + .master_id = 0, + }, { + .master_mode = 0, + .master_id = 0, + }, +}; + +static int apx4devkit_phy_fixup(struct phy_device *phy) +{ + phy->dev_flags |= MICREL_PHY_50MHZ_CLK; + return 0; +} + +static void __init apx4devkit_init(void) +{ + mxs_iomux_setup_multiple_pads(apx4devkit_pads, + ARRAY_SIZE(apx4devkit_pads)); + + mx28_add_duart(); + mx28_add_auart0(); + mx28_add_auart1(); + mx28_add_auart2(); + mx28_add_auart3(); + + /* + * Register fixup for the Micrel KS8031 PHY clock + * (shares same ID with KS8051) + */ + phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, + apx4devkit_phy_fixup); + + mx28_add_fec(0, &mx28_fec_pdata); + + mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); + + gpio_led_register_device(0, &apx4devkit_led_data); + + mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); + mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]); + mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]); + + apx4devkit_add_regulators(); + + mx28_add_mxs_i2c(0); + i2c_register_board_info(0, apx4devkit_i2c_boardinfo, + ARRAY_SIZE(apx4devkit_i2c_boardinfo)); + + mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); +} + +static void __init apx4devkit_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer apx4devkit_timer = { + .init = apx4devkit_timer_init, +}; + +MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit") + .map_io = mx28_map_io, + .init_irq = mx28_init_irq, + .timer = &apx4devkit_timer, + .init_machine = apx4devkit_init, + .restart = mxs_restart, +MACHINE_END diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 2f2758230edf..06d79963611c 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -247,18 +247,15 @@ static int __init m28evk_fec_get_mac(void) u32 val; const u32 *ocotp = mxs_get_ocotp(); - if (!ocotp) { - pr_err("%s: timeout when reading fec mac from OCOTP\n", - __func__); + if (!ocotp) return -ETIMEDOUT; - } /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code DENX OUI (C0:E5:4E) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i * 4]; + val = ocotp[i]; mx28_fec_pdata[i].mac[0] = 0xC0; mx28_fec_pdata[i].mac[1] = 0xE5; mx28_fec_pdata[i].mac[2] = 0x4E; diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index fdb0a5664dd6..e386c142f93c 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -223,7 +223,6 @@ static const struct gpio_led_platform_data mx28evk_led_data __initconst = { /* fec */ static void __init mx28evk_fec_reset(void) { - int ret; struct clk *clk; /* Enable fec phy clock */ @@ -231,32 +230,7 @@ static void __init mx28evk_fec_reset(void) if (!IS_ERR(clk)) clk_prepare_enable(clk); - /* Power up fec phy */ - ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power"); - if (ret) { - pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret); - return; - } - - ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0); - if (ret) { - pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret); - return; - } - - /* Reset fec phy */ - ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset"); - if (ret) { - pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret); - return; - } - - gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0); - if (ret) { - pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret); - return; - } - + gpio_set_value(MX28EVK_FEC_PHY_RESET, 0); mdelay(1); gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } @@ -278,14 +252,14 @@ static int __init mx28evk_fec_get_mac(void) const u32 *ocotp = mxs_get_ocotp(); if (!ocotp) - goto error; + return -ETIMEDOUT; /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code Freescale OUI (00:04:9f) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i * 4]; + val = ocotp[i]; mx28_fec_pdata[i].mac[0] = 0x00; mx28_fec_pdata[i].mac[1] = 0x04; mx28_fec_pdata[i].mac[2] = 0x9f; @@ -295,10 +269,6 @@ static int __init mx28evk_fec_get_mac(void) } return 0; - -error: - pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__); - return -ETIMEDOUT; } /* @@ -417,9 +387,14 @@ static void __init mx28evk_add_regulators(void) static void __init mx28evk_add_regulators(void) {} #endif -static struct gpio mx28evk_lcd_gpios[] = { +static const struct gpio mx28evk_gpios[] __initconst = { { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" }, { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" }, + { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" }, + { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" }, + { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" }, + { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" }, + { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" }, }; static const struct mxs_saif_platform_data @@ -447,25 +422,18 @@ static void __init mx28evk_init(void) if (mx28evk_fec_get_mac()) pr_warn("%s: failed on fec mac setup\n", __func__); + ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios)); + if (ret) + pr_err("One or more GPIOs failed to be requested: %d\n", ret); + mx28evk_fec_reset(); mx28_add_fec(0, &mx28_fec_pdata[0]); mx28_add_fec(1, &mx28_fec_pdata[1]); - ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, - "flexcan-switch"); - if (ret) { - pr_err("failed to request gpio flexcan-switch: %d\n", ret); - } else { - mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); - mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - } + mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); + mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - ret = gpio_request_array(mx28evk_lcd_gpios, - ARRAY_SIZE(mx28evk_lcd_gpios)); - if (ret) - pr_warn("failed to request gpio pins for lcd: %d\n", ret); - else - mx28_add_mxsfb(&mx28evk_mxsfb_pdata); + mx28_add_mxsfb(&mx28evk_mxsfb_pdata); mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]); @@ -480,20 +448,8 @@ static void __init mx28evk_init(void) mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); - /* power on mmc slot by writing 0 to the gpio */ - ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc0-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); - else - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); - - ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc1-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); - else - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); mx28_add_rtc_stmp3xxx(); diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c index fb042da29bda..a9b4bbcdafb4 100644 --- a/arch/arm/mach-mxs/pm.c +++ b/arch/arm/mach-mxs/pm.c @@ -15,13 +15,12 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/system.h> static int mxs_suspend_enter(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: - arch_idle(); + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c index 54f91ad1c965..80ac1fca8a00 100644 --- a/arch/arm/mach-mxs/system.c +++ b/arch/arm/mach-mxs/system.c @@ -25,7 +25,7 @@ #include <linux/module.h> #include <asm/proc-fns.h> -#include <asm/system.h> +#include <asm/system_misc.h> #include <mach/mxs.h> #include <mach/common.h> @@ -37,6 +37,8 @@ #define MXS_MODULE_CLKGATE (1 << 30) #define MXS_MODULE_SFTRST (1 << 31) +#define CLKCTRL_TIMEOUT 10 /* 10 ms */ + static void __iomem *mxs_clkctrl_reset_addr; /* @@ -137,3 +139,17 @@ error: return -ETIMEDOUT; } EXPORT_SYMBOL(mxs_reset_block); + +int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(CLKCTRL_TIMEOUT); + while (readl_relaxed(MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) + + reg_offset) & mask) { + if (time_after(jiffies, timeout)) { + pr_err("Timeout at CLKCTRL + 0x%x\n", reg_offset); + return -ETIMEDOUT; + } + } + + return 0; +} diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index b9913234bbf6..2cdf6ef69bee 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -92,18 +92,7 @@ void clk_put(struct clk *clk) { } -static struct amba_device fb_device = { - .dev = { - .init_name = "fb", - .coherent_dma_mask = ~0, - }, - .res = { - .start = 0x00104000, - .end = 0x00104fff, - .flags = IORESOURCE_MEM, - }, - .irq = { NETX_IRQ_LCD, NO_IRQ }, -}; +static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) { diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S deleted file mode 100644 index 6e9f1cbe1634..000000000000 --- a/arch/arm/mach-netx/include/mach/entry-macro.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Hilscher netX based platforms - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h deleted file mode 100644 index b38fa36d58c4..000000000000 --- a/arch/arm/mach-netx/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/system.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif - diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 7c878bf00340..58cacafcf662 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -27,11 +27,11 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/flash.h> +#include <asm/mach/time.h> #include <plat/gpio-nomadik.h> #include <plat/mtu.h> -#include <mach/setup.h> #include <mach/nand.h> #include <mach/fsmc.h> @@ -185,20 +185,11 @@ static void __init nhk8815_onenand_init(void) #endif } -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} +static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE, + { IRQ_UART0 }, NULL); -static struct amba_device uart0_device = { - .dev = { .init_name = "uart0" }, - __MEM_4K_RESOURCE(NOMADIK_UART0_BASE), - .irq = {IRQ_UART0, NO_IRQ}, -}; - -static struct amba_device uart1_device = { - .dev = { .init_name = "uart1" }, - __MEM_4K_RESOURCE(NOMADIK_UART1_BASE), - .irq = {IRQ_UART1, NO_IRQ}, -}; +static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE, + { IRQ_UART1 }, NULL); static struct amba_device *amba_devs[] __initdata = { &uart0_device, @@ -255,10 +246,7 @@ static void __init nomadik_timer_init(void) src_cr |= SRC_CR_INIT_VAL; writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); - /* Save global pointer to mtu, used by platform timer code */ - mtu_base = io_p2v(NOMADIK_MTU0_BASE); - - nmdk_timer_init(); + nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE)); } static struct sys_timer nomadik_timer = { diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 65df7b4fdd3e..27f43a46985e 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -97,12 +97,7 @@ static struct platform_device cpu8815_platform_gpio[] = { GPIO_DEVICE(3), }; -static struct amba_device cpu8815_amba_rng = { - .dev = { - .init_name = "rng", - }, - __MEM_4K_RESOURCE(NOMADIK_RNG_BASE), -}; +static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL); static struct platform_device *platform_devs[] __initdata = { cpu8815_platform_gpio + 0, @@ -112,7 +107,7 @@ static struct platform_device *platform_devs[] __initdata = { }; static struct amba_device *amba_devs[] __initdata = { - &cpu8815_amba_rng + &cpu8815_amba_rng_device }; static int __init cpu8815_init(void) diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S deleted file mode 100644 index 98ea1c1fbbab..000000000000 --- a/arch/arm/mach-nomadik/include/mach/entry-macro.S +++ /dev/null @@ -1,13 +0,0 @@ -/* - * Low-level IRQ helper macros for Nomadik platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h deleted file mode 100644 index bcaeaf41c053..000000000000 --- a/arch/arm/mach-nomadik/include/mach/setup.h +++ /dev/null @@ -1,19 +0,0 @@ - -/* - * These symbols are needed for board-specific files to call their - * own cpu-specific files - */ - -#ifndef __ASM_ARCH_SETUP_H -#define __ASM_ARCH_SETUP_H - -#include <asm/mach/time.h> -#include <linux/init.h> - -#ifdef CONFIG_NOMADIK_8815 - -extern void nmdk_timer_init(void); - -#endif /* NOMADIK_8815 */ - -#endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h deleted file mode 100644 index 25e198b8976c..000000000000 --- a/arch/arm/mach-nomadik/include/mach/system.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * mach-nomadik/include/mach/system.h - * - * Copyright (C) 2008 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 4f8d66f044e7..dfab466ebd1d 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -37,7 +37,6 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) - select OMAP_MCBSP help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. @@ -45,7 +44,6 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. @@ -72,7 +70,6 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. @@ -155,6 +152,10 @@ config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" depends on ARCH_OMAP1 && ARCH_OMAP15XX select FIQ + select GPIO_GENERIC_PLATFORM + select LEDS_GPIO_REGISTER + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 11c85cd2731a..9923f92b5450 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -6,7 +6,9 @@ obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +obj-y += mcbsp.o +endif obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index c1c5fb6a5b4c..399c4c49722f 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -15,11 +15,12 @@ #include <linux/linkage.h> -#include <plat/io.h> #include <plat/board-ams-delta.h> #include <mach/ams-delta-fiq.h> +#include "iomap.h" + /* * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c. * Unfortunately, those were not placed in a separate header file. diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 152b32c15e28..fcce7ff37630 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -22,6 +22,7 @@ #include <plat/board-ams-delta.h> #include <asm/fiq.h> + #include <mach/ams-delta-fiq.h> static struct fiq_handler fh = { diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 88909cc0b254..c1b681ef4cba 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/basic_mmio_gpio.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> @@ -18,30 +19,33 @@ #include <linux/interrupt.h> #include <linux/leds.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/serial_8250.h> #include <linux/export.h> +#include <linux/omapfb.h> +#include <linux/io.h> #include <media/soc_camera.h> #include <asm/serial.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/io.h> #include <plat/board-ams-delta.h> #include <plat/keypad.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> -#include "common.h" -#include <mach/camera.h> +#include <mach/hardware.h> #include <mach/ams-delta-fiq.h> +#include <mach/camera.h> -static u8 ams_delta_latch1_reg; -static u16 ams_delta_latch2_reg; +#include "iomap.h" +#include "common.h" static const unsigned int ams_delta_keymap[] = { KEY(0, 0, KEY_F1), /* Advert */ @@ -121,58 +125,188 @@ static const unsigned int ams_delta_keymap[] = { KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ }; -void ams_delta_latch1_write(u8 mask, u8 value) -{ - ams_delta_latch1_reg &= ~mask; - ams_delta_latch1_reg |= value; - *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg; -} - -void ams_delta_latch2_write(u16 mask, u16 value) -{ - ams_delta_latch2_reg &= ~mask; - ams_delta_latch2_reg |= value; - *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; -} +#define LATCH1_PHYS 0x01000000 +#define LATCH1_VIRT 0xEA000000 +#define MODEM_PHYS 0x04000000 +#define MODEM_VIRT 0xEB000000 +#define LATCH2_PHYS 0x08000000 +#define LATCH2_VIRT 0xEC000000 static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { - .virtual = AMS_DELTA_LATCH1_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), + .virtual = LATCH1_VIRT, + .pfn = __phys_to_pfn(LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_LATCH2 */ { - .virtual = AMS_DELTA_LATCH2_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), + .virtual = LATCH2_VIRT, + .pfn = __phys_to_pfn(LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_MODEM */ { - .virtual = AMS_DELTA_MODEM_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), + .virtual = MODEM_VIRT, + .pfn = __phys_to_pfn(MODEM_PHYS), .length = 0x01000000, .type = MT_DEVICE } }; -static struct omap_lcd_config ams_delta_lcd_config = { +static struct omap_lcd_config ams_delta_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_usb_config ams_delta_usb_config __initdata = { +static struct omap_usb_config ams_delta_usb_config = { .register_host = 1, .hmc_mode = 16, .pins[0] = 2, }; -static struct omap_board_config_kernel ams_delta_config[] __initdata = { - { OMAP_TAG_LCD, &ams_delta_lcd_config }, +#define LATCH1_GPIO_BASE 232 +#define LATCH1_NGPIO 8 + +static struct resource latch1_resources[] = { + [0] = { + .name = "dat", + .start = LATCH1_PHYS, + .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, }; +static struct bgpio_pdata latch1_pdata = { + .base = LATCH1_GPIO_BASE, + .ngpio = LATCH1_NGPIO, +}; + +static struct platform_device latch1_gpio_device = { + .name = "basic-mmio-gpio", + .id = 0, + .resource = latch1_resources, + .num_resources = ARRAY_SIZE(latch1_resources), + .dev = { + .platform_data = &latch1_pdata, + }, +}; + +static struct resource latch2_resources[] = { + [0] = { + .name = "dat", + .start = LATCH2_PHYS, + .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch2_pdata = { + .base = AMS_DELTA_LATCH2_GPIO_BASE, + .ngpio = AMS_DELTA_LATCH2_NGPIO, +}; + +static struct platform_device latch2_gpio_device = { + .name = "basic-mmio-gpio", + .id = 1, + .resource = latch2_resources, + .num_resources = ARRAY_SIZE(latch2_resources), + .dev = { + .platform_data = &latch2_pdata, + }, +}; + +static const struct gpio latch_gpios[] __initconst = { + { + .gpio = LATCH1_GPIO_BASE + 6, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit1", + }, + { + .gpio = LATCH1_GPIO_BASE + 7, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit2", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_rstin", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_cmdvcc", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "modem_codec", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash1", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash2", + }, +}; + +static struct regulator_consumer_supply modem_nreset_consumers[] = { + REGULATOR_SUPPLY("RESET#", "serial8250.1"), + REGULATOR_SUPPLY("POR", "cx20442-codec"), +}; + +static struct regulator_init_data modem_nreset_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers), + .consumer_supplies = modem_nreset_consumers, +}; + +static struct fixed_voltage_config modem_nreset_config = { + .supply_name = "modem_nreset", + .microvolts = 3300000, + .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, + .startup_delay = 25000, + .enable_high = 1, + .enabled_at_boot = 1, + .init_data = &modem_nreset_data, +}; + +static struct platform_device modem_nreset_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &modem_nreset_config, + }, +}; + +struct modem_private_data { + struct regulator *regulator; +}; + +static struct modem_private_data modem_priv; + +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) +{ + int bit = 0; + u16 bitpos = 1 << bit; + + for (; bit < ngpio; bit++, bitpos = bitpos << 1) { + if (!(mask & bitpos)) + continue; + else + gpio_set_value(base + bit, (value & bitpos) != 0); + } +} +EXPORT_SYMBOL(ams_delta_latch_write); + static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -202,7 +336,7 @@ static const struct matrix_keymap_data ams_delta_keymap_data = { .keymap_size = ARRAY_SIZE(ams_delta_keymap), }; -static struct omap_kp_platform_data ams_delta_kp_data __initdata = { +static struct omap_kp_platform_data ams_delta_kp_data = { .rows = 8, .cols = 8, .keymap_data = &ams_delta_keymap_data, @@ -224,9 +358,45 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct platform_device ams_delta_led_device = { - .name = "ams-delta-led", - .id = -1 +static const struct gpio_led gpio_leds[] __initconst = { + { + .name = "camera", + .gpio = LATCH1_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_OFF, +#ifdef CONFIG_LEDS_TRIGGERS + .default_trigger = "ams_delta_camera", +#endif + }, + { + .name = "advert", + .gpio = LATCH1_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "email", + .gpio = LATCH1_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "handsfree", + .gpio = LATCH1_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voicemail", + .gpio = LATCH1_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voice", + .gpio = LATCH1_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static const struct gpio_led_platform_data leds_pdata __initconst = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), }; static struct i2c_board_info ams_delta_camera_board_info[] = { @@ -275,13 +445,17 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { }; static struct platform_device *ams_delta_devices[] __initdata = { - &ams_delta_nand_device, + &latch1_gpio_device, + &latch2_gpio_device, &ams_delta_kp_device, - &ams_delta_lcd_device, - &ams_delta_led_device, &ams_delta_camera_device, }; +static struct platform_device *late_devices[] __initdata = { + &ams_delta_nand_device, + &ams_delta_lcd_device, +}; + static void __init ams_delta_init(void) { /* mux pins for uarts */ @@ -302,37 +476,53 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); - omap_board_config = ams_delta_config; - omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - /* Clear latch2 (NAND, LCD, modem enable) */ - ams_delta_latch2_write(~0, 0); - omap1_usb_init(&ams_delta_usb_config); omap1_set_camera_info(&ams_delta_camera_platform_data); #ifdef CONFIG_LEDS_TRIGGERS led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif + gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); ams_delta_init_fiq(); omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); + + omapfb_set_lcd_config(&ams_delta_lcd_config); +} + +static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) +{ + struct modem_private_data *priv = port->private_data; + + if (IS_ERR(priv->regulator)) + return; + + if (state == old) + return; + + if (state == 0) + regulator_enable(priv->regulator); + else if (old == 0) + regulator_disable(priv->regulator); } static struct plat_serial8250_port ams_delta_modem_ports[] = { { - .membase = IOMEM(AMS_DELTA_MODEM_VIRT), - .mapbase = AMS_DELTA_MODEM_PHYS, + .membase = IOMEM(MODEM_VIRT), + .mapbase = MODEM_PHYS, .irq = -EINVAL, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, .iotype = UPIO_MEM, .regshift = 1, .uartclk = BASE_BAUD * 16, + .pm = modem_pm, + .private_data = &modem_priv, }, { }, }; @@ -345,13 +535,27 @@ static struct platform_device ams_delta_modem_device = { }, }; -static int __init ams_delta_modem_init(void) +static int __init late_init(void) { int err; if (!machine_is_ams_delta()) return -ENODEV; + err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); + if (err) { + pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); + return err; + } + + platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); + + err = platform_device_register(&modem_nreset_device); + if (err) { + pr_err("Couldn't register the modem regulator device\n"); + return err; + } + omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); @@ -363,13 +567,35 @@ static int __init ams_delta_modem_init(void) } gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); - ams_delta_latch2_write( - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); + /* Initialize the modem_nreset regulator consumer before use */ + modem_priv.regulator = ERR_PTR(-ENODEV); + + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, + AMS_DELTA_LATCH2_MODEM_CODEC); - return platform_device_register(&ams_delta_modem_device); + err = platform_device_register(&ams_delta_modem_device); + if (err) + goto gpio_free; + + /* + * Once the modem device is registered, the modem_nreset + * regulator can be requested on behalf of that device. + */ + modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, + "RESET#"); + if (IS_ERR(modem_priv.regulator)) { + err = PTR_ERR(modem_priv.regulator); + goto unregister; + } + return 0; + +unregister: + platform_device_unregister(&ams_delta_modem_device); +gpio_free: + gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + return err; } -arch_initcall(ams_delta_modem_init); +late_initcall(late_init); static void __init ams_delta_map_io(void) { @@ -388,6 +614,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .timer = &omap1_timer, .restart = omap1_restart, MACHINE_END - -EXPORT_SYMBOL(ams_delta_latch1_write); -EXPORT_SYMBOL(ams_delta_latch2_write); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 0b9464b41212..80bd43c7f4ec 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -21,8 +21,8 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,9 +32,13 @@ #include <plat/flash.h> #include <plat/fpga.h> #include <plat/keypad.h> -#include "common.h" #include <plat/board.h> +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" + /* fsample is pretty close to p2-sample */ #define fsample_cpld_read(reg) __raw_readb(reg) @@ -273,27 +277,17 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; static struct omap_lcd_config fsample_lcd_config = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel fsample_config[] __initdata = { - { OMAP_TAG_LCD, &fsample_lcd_config }, -}; - static void __init omap_fsample_init(void) { /* Early, board-dependent init */ @@ -352,10 +346,10 @@ static void __init omap_fsample_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = fsample_config; - omap_board_config_size = ARRAY_SIZE(fsample_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&fsample_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 00ad6b22d60a..c3068622fdcb 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -30,8 +30,7 @@ #include <linux/input.h> #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> - -#include <mach/hardware.h> +#include <linux/omapfb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -43,9 +42,11 @@ #include <plat/irda.h> #include <plat/usb.h> #include <plat/keypad.h> -#include "common.h" #include <plat/flash.h> +#include <mach/hardware.h> + +#include "common.h" #include "board-h2.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ @@ -325,18 +326,12 @@ static struct platform_device h2_irda_device = { .resource = h2_irda_resources, }; -static struct platform_device h2_lcd_device = { - .name = "lcd_h2", - .id = -1, -}; - static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, &h2_nand_device, &h2_smc91x_device, &h2_irda_device, &h2_kp_device, - &h2_lcd_device, }; static void __init h2_init_smc91x(void) @@ -391,10 +386,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h2_config[] __initdata = { - { OMAP_TAG_LCD, &h2_lcd_config }, -}; - static void __init h2_init(void) { h2_init_smc91x(); @@ -438,13 +429,13 @@ static void __init h2_init(void) omap_cfg_reg(N19_1610_KBR5); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); - omap_board_config = h2_config; - omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); omap1_usb_init(&h2_usb_config); h2_mmc_init(); + + omapfb_set_lcd_config(&h2_lcd_config); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4a7f25149703..64b8584f64ce 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -30,24 +30,25 @@ #include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <asm/setup.h> #include <asm/page.h> -#include <mach/hardware.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/irqs.h> #include <plat/mux.h> #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> -#include "common.h" #include <plat/flash.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + +#include "common.h" #include "board-h3.h" /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ @@ -370,10 +371,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h3_config[] __initdata = { - { OMAP_TAG_LCD, &h3_lcd_config }, -}; - static struct i2c_board_info __initdata h3_i2c_board_info[] = { { I2C_BOARD_INFO("tps65013", 0x48), @@ -426,13 +423,13 @@ static void __init h3_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(h3_spi_board_info, ARRAY_SIZE(h3_spi_board_info)); - omap_board_config = h3_config; - omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); omap1_usb_init(&h3_usb_config); h3_mmc_init(); + + omapfb_set_lcd_config(&h3_lcd_config); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 731cc3db7ab3..827d83a96af8 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -27,7 +27,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> -#include <linux/io.h> +#include <linux/delay.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/i2c.h> @@ -36,12 +36,12 @@ #include <linux/leds.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/omapfb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/omap7xx.h> -#include "common.h" #include <plat/board.h> #include <plat/keypad.h> #include <plat/usb.h> @@ -49,7 +49,7 @@ #include <mach/irqs.h> -#include <linux/delay.h> +#include "common.h" /* LCD register definition */ #define OMAP_LCDC_CONTROL (0xfffec000 + 0x00) @@ -398,10 +398,6 @@ static struct omap_lcd_config htcherald_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel htcherald_config[] __initdata = { - { OMAP_TAG_LCD, &htcherald_lcd_config }, -}; - static struct platform_device lcd_device = { .name = "lcd_htcherald", .id = -1, @@ -580,8 +576,6 @@ static void __init htcherald_init(void) printk(KERN_INFO "HTC Herald init.\n"); /* Do board initialization before we register all the devices */ - omap_board_config = htcherald_config; - omap_board_config_size = ARRAY_SIZE(htcherald_config); platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); @@ -598,6 +592,8 @@ static void __init htcherald_init(void) htc_mmc_data[0] = &htc_mmc1_data; omap1_init_mmc(htc_mmc_data, 1); #endif + + omapfb_set_lcd_config(&htcherald_lcd_config); } MACHINE_START(HERALD, "HTC Herald") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index be2002f42dea..61219182d16a 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -25,8 +25,8 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -37,9 +37,13 @@ #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> -#include "common.h" #include <plat/mmc.h> +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" + /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 @@ -370,10 +374,6 @@ static inline void innovator_mmc_init(void) } #endif -static struct omap_board_config_kernel innovator_config[] = { - { OMAP_TAG_LCD, NULL }, -}; - static void __init innovator_init(void) { if (cpu_is_omap1510()) @@ -416,17 +416,15 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[0].data = &innovator1510_lcd_config; + omapfb_set_lcd_config(&innovator1510_lcd_config); } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[0].data = &innovator1610_lcd_config; + omapfb_set_lcd_config(&innovator1610_lcd_config); } #endif - omap_board_config = innovator_config; - omap_board_config_size = ARRAY_SIZE(innovator_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); innovator_mmc_init(); diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index f9efc036ba96..fe95ec5f6f03 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -21,7 +21,6 @@ #include <linux/workqueue.h> #include <linux/delay.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -30,12 +29,14 @@ #include <plat/usb.h> #include <plat/board.h> #include <plat/keypad.h> -#include "common.h" -#include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> #include <plat/clock.h> +#include <mach/hardware.h> + +#include "common.h" + #define ADS7846_PENDOWN_GPIO 15 static const unsigned int nokia770_keymap[] = { @@ -99,15 +100,16 @@ static struct mipid_platform_data nokia770_mipid_platform_data = { .shutdown = mipid_shutdown, }; +static struct omap_lcd_config nokia770_lcd_config __initdata = { + .ctrl_name = "hwa742", +}; + static void __init mipid_dev_init(void) { - const struct omap_lcd_config *conf; + nokia770_mipid_platform_data.nreset_gpio = 13; + nokia770_mipid_platform_data.data_lines = 16; - conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf != NULL) { - nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio; - nokia770_mipid_platform_data.data_lines = conf->data_lines; - } + omapfb_set_lcd_config(&nokia770_lcd_config); } static void __init ads7846_dev_init(void) @@ -150,14 +152,9 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { }, }; -static struct hwa742_platform_data nokia770_hwa742_platform_data = { - .te_connected = 1, -}; - static void __init hwa742_dev_init(void) { clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); - omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); } /* assume no Mini-AB port */ diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 675de06557aa..1fe347396f4d 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -34,15 +34,12 @@ #include <linux/i2c.h> #include <linux/leds.h> #include <linux/smc91x.h> - +#include <linux/omapfb.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> - #include <linux/i2c/tps65010.h> -#include <mach/hardware.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -51,6 +48,9 @@ #include <plat/usb.h> #include <plat/mux.h> #include <plat/tc.h> + +#include <mach/hardware.h> + #include "common.h" /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ @@ -300,12 +300,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = { }; #endif -static struct omap_board_config_kernel osk_config[] __initdata = { -#ifdef CONFIG_OMAP_OSK_MISTRAL - { OMAP_TAG_LCD, &osk_lcd_config }, -#endif -}; - #ifdef CONFIG_OMAP_OSK_MISTRAL #include <linux/input.h> @@ -549,8 +543,6 @@ static void __init osk_init(void) osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); - omap_board_config = osk_config; - omap_board_config_size = ARRAY_SIZE(osk_config); l = omap_readl(USB_TRANSCEIVER_CTRL); l |= (3 << 1); @@ -567,6 +559,11 @@ static void __init osk_init(void) omap_register_i2c_bus(1, 400, osk_i2c_board_info, ARRAY_SIZE(osk_i2c_board_info)); osk_mistral_init(); + +#ifdef CONFIG_OMAP_OSK_MISTRAL + omapfb_set_lcd_config(&osk_lcd_config); +#endif + } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 81fa27f88369..0863d8e2bdf1 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -27,8 +27,8 @@ #include <linux/spi/spi.h> #include <linux/interrupt.h> #include <linux/apm-emulation.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -41,6 +41,9 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> + +#include <mach/hardware.h> + #include "common.h" #define PALMTE_USBDETECT_GPIO 0 @@ -209,10 +212,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmte_config[] __initdata = { - { OMAP_TAG_LCD, &palmte_lcd_config }, -}; - static struct spi_board_info palmte_spi_info[] __initdata = { { .modalias = "tsc2102", @@ -250,9 +249,6 @@ static void __init omap_palmte_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - omap_board_config = palmte_config; - omap_board_config_size = ARRAY_SIZE(palmte_config); - platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); @@ -260,6 +256,8 @@ static void __init omap_palmte_init(void) omap_serial_init(); omap1_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&palmte_lcd_config); } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 81cb82178388..4ff699c509c0 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -24,8 +24,10 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/leds.h> +#include <linux/omapfb.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -39,10 +41,10 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> -#include "common.h" -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> +#include <mach/hardware.h> + +#include "common.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 @@ -273,10 +275,6 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmtt_config[] __initdata = { - { OMAP_TAG_LCD, &palmtt_lcd_config }, -}; - static void __init omap_mpu_wdt_mode(int mode) { if (mode) omap_writew(0x8000, OMAP_WDT_TIMER_MODE); @@ -298,15 +296,14 @@ static void __init omap_palmtt_init(void) omap_mpu_wdt_mode(0); - omap_board_config = palmtt_config; - omap_board_config_size = ARRAY_SIZE(palmtt_config); - platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); omap1_usb_init(&palmtt_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&palmtt_lcd_config); } MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e881945ce8ec..abcbbd339aeb 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -27,8 +27,10 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/omapfb.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -41,10 +43,10 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> -#include "common.h" -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> +#include <mach/hardware.h> + +#include "common.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 @@ -239,10 +241,6 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmz71_config[] __initdata = { - {OMAP_TAG_LCD, &palmz71_lcd_config}, -}; - static irqreturn_t palmz71_powercable(int irq, void *dev_id) { @@ -313,9 +311,6 @@ omap_palmz71_init(void) palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); - omap_board_config = palmz71_config; - omap_board_config_size = ARRAY_SIZE(palmz71_config); - platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(palmz71_boardinfo, @@ -324,6 +319,8 @@ omap_palmz71_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); + + omapfb_set_lcd_config(&palmz71_lcd_config); } MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index c000bed76276..76d4ee05a814 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -21,8 +21,8 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,9 +32,13 @@ #include <plat/fpga.h> #include <plat/flash.h> #include <plat/keypad.h> -#include "common.h" #include <plat/board.h> +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" + static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), KEY(1, 0, KEY_RIGHT), @@ -232,27 +236,17 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel perseus2_config[] __initdata = { - { OMAP_TAG_LCD, &perseus2_lcd_config }, -}; - static void __init perseus2_init_smc91x(void) { fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); @@ -320,10 +314,10 @@ static void __init omap_perseus2_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = perseus2_config; - omap_board_config_size = ARRAY_SIZE(perseus2_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&perseus2_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 7bcd82ab0fd0..f34cb74a9f41 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -27,8 +27,8 @@ #include <linux/i2c.h> #include <linux/errno.h> #include <linux/export.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -40,10 +40,13 @@ #include <plat/usb.h> #include <plat/tc.h> #include <plat/board.h> -#include "common.h" #include <plat/keypad.h> #include <plat/board-sx1.h> +#include <mach/hardware.h> + +#include "common.h" + /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) { @@ -355,11 +358,6 @@ static struct omap_usb_config sx1_usb_config __initdata = { /*----------- LCD -------------------------*/ -static struct platform_device sx1_lcd_device = { - .name = "lcd_sx1", - .id = -1, -}; - static struct omap_lcd_config sx1_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -368,14 +366,8 @@ static struct omap_lcd_config sx1_lcd_config __initdata = { static struct platform_device *sx1_devices[] __initdata = { &sx1_flash_device, &sx1_kp_device, - &sx1_lcd_device, &sx1_irda_device, }; -/*-----------------------------------------*/ - -static struct omap_board_config_kernel sx1_config[] __initdata = { - { OMAP_TAG_LCD, &sx1_lcd_config }, -}; /*-----------------------------------------*/ @@ -391,8 +383,6 @@ static void __init omap_sx1_init(void) platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); - omap_board_config = sx1_config; - omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); omap1_usb_init(&sx1_usb_config); @@ -406,6 +396,8 @@ static void __init omap_sx1_init(void) gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ + + omapfb_set_lcd_config(&sx1_lcd_config); } MACHINE_START(SX1, "OMAP310 based Siemens SX1") diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index f83a502dc93c..659d0f75de2c 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -27,18 +27,20 @@ #include <linux/smc91x.h> #include <linux/export.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/board-voiceblue.h> -#include "common.h" #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> #include <plat/usb.h> +#include <mach/hardware.h> + +#include "common.h" + static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 0c50df05d135..67382ddd8c83 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -15,8 +15,8 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/clk.h> #include <linux/io.h> +#include <linux/clk.h> #include <linux/clkdev.h> #include <asm/mach-types.h> @@ -27,6 +27,9 @@ #include <plat/sram.h> #include <plat/clkdev_omap.h> +#include <mach/hardware.h> + +#include "iomap.h" #include "clock.h" #include "opp.h" diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 94699a82a734..c6ce93f71d08 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -15,10 +15,10 @@ */ #include <linux/kernel.h> +#include <linux/io.h> #include <linux/clk.h> #include <linux/cpufreq.h> #include <linux/delay.h> -#include <linux/io.h> #include <asm/mach-types.h> /* for machine_is_* */ @@ -28,6 +28,9 @@ #include <plat/sram.h> /* for omap_sram_reprogram_clock() */ #include <plat/usb.h> /* for OTG_BASE */ +#include <mach/hardware.h> + +#include "iomap.h" #include "clock.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index a9a5146dd2d4..af658ad338ec 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -58,5 +58,6 @@ void omap1_restart(char, const char *); extern struct sys_timer omap1_timer; extern bool omap_32k_timer_init(void); +extern void __init omap_init_consistent_dma_size(void); #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 1d76a63c0983..dcd8ddbec2bb 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -15,21 +15,20 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/io.h> #include <linux/spi/spi.h> -#include <mach/camera.h> -#include <mach/hardware.h> #include <asm/mach/map.h> -#include "common.h" #include <plat/tc.h> #include <plat/board.h> #include <plat/mux.h> #include <plat/mmc.h> #include <plat/omap7xx.h> -#include <plat/mcbsp.h> +#include <mach/camera.h> +#include <mach/hardware.h> + +#include "common.h" #include "clock.h" /*-------------------------------------------------------------------------*/ @@ -250,16 +249,8 @@ static struct platform_device omap_pcm = { .id = -1, }; -OMAP_MCBSP_PLATFORM_DEVICE(1); -OMAP_MCBSP_PLATFORM_DEVICE(2); -OMAP_MCBSP_PLATFORM_DEVICE(3); - static void omap_init_audio(void) { - platform_device_register(&omap_mcbsp1); - platform_device_register(&omap_mcbsp2); - if (!cpu_is_omap7xx()) - platform_device_register(&omap_mcbsp3); platform_device_register(&omap_pcm); } diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index f5a52204b89f..3ef7d52316b4 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -19,11 +19,11 @@ */ #include <linux/err.h> -#include <linux/io.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/io.h> #include <plat/dma.h> #include <plat/tc.h> diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 1749cb37dda0..f9bf78d4fdfb 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -6,13 +6,15 @@ * published by the Free Software Foundation. */ +#include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <plat/io.h> #include <plat/tc.h> #include <plat/flash.h> +#include <mach/hardware.h> + void omap1_set_vpp(struct platform_device *pdev, int enable) { static int count; diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 0a17a1a7e00d..76c67b3f9f61 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -24,12 +24,15 @@ #include <linux/errno.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> #include <plat/fpga.h> +#include <mach/hardware.h> + +#include "iomap.h" + static void fpga_mask_irq(struct irq_data *d) { unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE; diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 399da4ce017b..634903ef8292 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -42,11 +42,12 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT, .irqenable = OMAP_MPUIO_GPIO_MASKIT, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, + .is_mpuio = true, .bank_width = 16, .bank_stride = 1, .regs = &omap15xx_mpuio_regs, @@ -83,11 +84,12 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = { .irqstatus = OMAP1510_GPIO_INT_STATUS, .irqenable = OMAP1510_GPIO_INT_MASK, .irqenable_inv = true, + .irqctrl = OMAP1510_GPIO_INT_CONTROL, + .pinctrl = OMAP1510_GPIO_PIN_CONTROL, }; static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_1510, .bank_width = 16, .regs = &omap15xx_gpio_regs, }; @@ -115,7 +117,6 @@ static int __init omap15xx_gpio_init(void) platform_device_register(&omap15xx_mpu_gpio); platform_device_register(&omap15xx_gpio); - gpio_bank_count = 2; return 0; } postcore_initcall(omap15xx_gpio_init); diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 0f399bd0e70e..1fb3b9ad496e 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -24,6 +24,9 @@ #define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE +/* smart idle, enable wakeup */ +#define SYSCONFIG_WORD 0x14 + /* mpu gpio */ static struct __initdata resource omap16xx_mpu_gpio_resources[] = { { @@ -45,11 +48,12 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT, .irqenable = OMAP_MPUIO_GPIO_MASKIT, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, + .is_mpuio = true, .bank_width = 16, .bank_stride = 1, .regs = &omap16xx_mpuio_regs, @@ -89,11 +93,13 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = { .irqenable = OMAP1610_GPIO_IRQENABLE1, .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1, .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1, + .wkup_en = OMAP1610_GPIO_WAKEUPENABLE, + .edgectrl1 = OMAP1610_GPIO_EDGE_CTRL1, + .edgectrl2 = OMAP1610_GPIO_EDGE_CTRL2, }; static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -123,7 +129,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 16, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -153,7 +158,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 32, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -183,7 +187,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 48, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -214,14 +217,42 @@ static struct __initdata platform_device * omap16xx_gpio_dev[] = { static int __init omap16xx_gpio_init(void) { int i; + void __iomem *base; + struct resource *res; + struct platform_device *pdev; + struct omap_gpio_platform_data *pdata; if (!cpu_is_omap16xx()) return -EINVAL; - for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) - platform_device_register(omap16xx_gpio_dev[i]); + /* + * Enable system clock for GPIO module. + * The CAM_CLK_CTRL *is* really the right place. + */ + omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, + ULPD_CAM_CLK_CTRL); + + for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) { + pdev = omap16xx_gpio_dev[i]; + pdata = pdev->dev.platform_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "Invalid mem resource.\n"); + return -ENODEV; + } - gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev); + base = ioremap(res->start, resource_size(res)); + if (unlikely(!base)) { + dev_err(&pdev->dev, "ioremap failed.\n"); + return -ENOMEM; + } + + __raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG); + iounmap(base); + + platform_device_register(omap16xx_gpio_dev[i]); + } return 0; } diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 5ab63eab0ff5..4771d6b68b96 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -47,12 +47,13 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT / 2, .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE >> 1, }; static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, - .bank_width = 32, + .is_mpuio = true, + .bank_width = 16, .bank_stride = 2, .regs = &omap7xx_mpuio_regs, }; @@ -88,11 +89,11 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = { .irqstatus = OMAP7XX_GPIO_INT_STATUS, .irqenable = OMAP7XX_GPIO_INT_MASK, .irqenable_inv = true, + .irqctrl = OMAP7XX_GPIO_INT_CONTROL, }; static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -122,7 +123,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 32, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -152,7 +152,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 64, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -182,7 +181,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 96, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -212,7 +210,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .virtual_irq_start = IH_GPIO_BASE + 128, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -242,7 +239,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .virtual_irq_start = IH_GPIO_BASE + 160, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -282,8 +278,6 @@ static int __init omap7xx_gpio_init(void) for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++) platform_device_register(omap7xx_gpio_dev[i]); - gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev); - return 0; } postcore_initcall(omap7xx_gpio_init); diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index a0e3560b39db..2b28e1da14b0 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -15,8 +15,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <asm/system_info.h> + #include <plat/cpu.h> +#include <mach/hardware.h> + #define OMAP_DIE_ID_0 0xfffe1800 #define OMAP_DIE_ID_1 0xfffe1804 #define OMAP_PRODUCTION_ID_0 0xfffe2000 diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index bfb4fb1d7382..fa0f32a686aa 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -9,20 +9,16 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ + #include <mach/hardware.h> #include <mach/io.h> #include <mach/irqs.h> -#include <asm/hardware/gic.h> - .macro disable_fiq - .endm +#include "../../iomap.h" .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index a3f6287b2007..01e35fa106b8 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -2,4 +2,40 @@ * arch/arm/mach-omap1/include/mach/hardware.h */ +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +#ifndef __ASSEMBLER__ +/* + * NOTE: Please use ioremap + __raw_read/write where possible instead of these + */ +extern u8 omap_readb(u32 pa); +extern u16 omap_readw(u32 pa); +extern u32 omap_readl(u32 pa); +extern void omap_writeb(u8 v, u32 pa); +extern void omap_writew(u16 v, u32 pa); +extern void omap_writel(u32 v, u32 pa); + +#include <plat/tc.h> + +/* Almost all documentation for chip and board memory maps assumes + * BM is clear. Most devel boards have a switch to control booting + * from NOR flash (using external chipselect 3) rather than mask ROM, + * which uses BM to interchange the physical CS0 and CS3 addresses. + */ +static inline u32 omap_cs0m_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? OMAP_CS3_PHYS : 0; +} + +static inline u32 omap_cs3_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? 0 : OMAP_CS3_PHYS; +} + +#endif +#endif + #include <plat/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h index 57bdf74a3e64..37b12e1fd022 100644 --- a/arch/arm/mach-omap1/include/mach/io.h +++ b/arch/arm/mach-omap1/include/mach/io.h @@ -1,5 +1,46 @@ /* * arch/arm/mach-omap1/include/mach/io.h + * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup */ -#include <plat/io.h> +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index c6337645ba8a..901082def9bd 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -18,7 +18,8 @@ * Note that the is_lbus_device() test is not very efficient on 1510 * because of the strncmp(). */ -#ifdef CONFIG_ARCH_OMAP15XX +#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) +#include <plat/cpu.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h deleted file mode 100644 index a6c1b3a16dfc..000000000000 --- a/arch/arm/mach-omap1/include/mach/system.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/system.h - */ - -#include <plat/system.h> diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 8e55b6fb3478..d969a7203d14 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,9 +15,12 @@ #include <asm/tlb.h> #include <asm/mach/map.h> + #include <plat/mux.h> #include <plat/tc.h> +#include "iomap.h" +#include "common.h" #include "clock.h" extern void omap_check_revision(void); @@ -118,7 +121,7 @@ void __init omap16xx_map_io(void) /* * Common low-level hardware init for omap1. */ -void omap1_init_early(void) +void __init omap1_init_early(void) { omap_check_revision(); diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h new file mode 100644 index 000000000000..d68175761c3d --- /dev/null +++ b/arch/arm/mach-omap1/iomap.h @@ -0,0 +1,42 @@ +/* + * IO mappings for OMAP1 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef __ASSEMBLER__ +#define IOMEM(x) (x) +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +/* + * ---------------------------------------------------------------------------- + * Omap1 specific IO mapping + * ---------------------------------------------------------------------------- + */ + +#define OMAP1_IO_PHYS 0xFFFB0000 +#define OMAP1_IO_SIZE 0x40000 +#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET) diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index e5b104b7fce6..4448114fab72 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -42,11 +42,13 @@ #include <linux/interrupt.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> + #include <plat/cpu.h> +#include <mach/hardware.h> + #define IRQ_BANK(irq) ((irq) >> 5) #define IRQ_BIT(irq) ((irq) & 0x1f) diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 4c5ce7d829c2..86ace9aaa663 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,9 +27,10 @@ #include <linux/interrupt.h> #include <linux/io.h> +#include <plat/dma.h> + #include <mach/hardware.h> #include <mach/lcdc.h> -#include <plat/dma.h> int omap_lcd_dma_running(void) { diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 4b818eb9f911..f6b14a14a957 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -17,7 +17,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <plat/fpga.h> diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c index 9b99c2894623..3a066ee8d02c 100644 --- a/arch/arm/mach-omap1/leds-innovator.c +++ b/arch/arm/mach-omap1/leds-innovator.c @@ -5,7 +5,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index da09f4364979..936ed426b84f 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -8,7 +8,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 91f9abbd3250..adf00975b9bb 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,12 +19,15 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <mach/irqs.h> #include <plat/dma.h> #include <plat/mux.h> #include <plat/cpu.h> #include <plat/mcbsp.h> +#include <mach/irqs.h> + +#include "iomap.h" + #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) @@ -420,18 +423,6 @@ static int __init omap1_mcbsp_init(void) return -ENODEV; if (cpu_is_omap7xx()) - omap_mcbsp_count = OMAP7XX_MCBSP_COUNT; - else if (cpu_is_omap15xx()) - omap_mcbsp_count = OMAP15XX_MCBSP_COUNT; - else if (cpu_is_omap16xx()) - omap_mcbsp_count = OMAP16XX_MCBSP_COUNT; - - mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), - GFP_KERNEL); - if (!mcbsp_ptr) - return -ENOMEM; - - if (cpu_is_omap7xx()) omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0, OMAP7XX_MCBSP_RES_SZ, omap7xx_mcbsp_pdata, @@ -449,7 +440,7 @@ static int __init omap1_mcbsp_init(void) omap16xx_mcbsp_pdata, OMAP16XX_MCBSP_COUNT); - return omap_mcbsp_init(); + return 0; } arch_initcall(omap1_mcbsp_init); diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 5fdef7a34828..087dba0df47e 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -27,7 +27,6 @@ #include <linux/io.h> #include <linux/spinlock.h> -#include <asm/system.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 89ea20ca0ccc..306beaca14c5 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -42,14 +42,13 @@ #include <linux/sysfs.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/atomic.h> #include <asm/irq.h> -#include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <plat/cpu.h> -#include <mach/irqs.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/tc.h> @@ -57,6 +56,9 @@ #include <plat/dma.h> #include <plat/dmtimer.h> +#include <mach/irqs.h> + +#include "iomap.h" #include "pm.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; @@ -108,13 +110,7 @@ void omap1_pm_idle(void) __u32 use_idlect1 = arm_idlect1_mask; int do_sleep = 0; - local_irq_disable(); local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) #warning Enable 32kHz OS timer in order to allow sleep states in idle @@ -157,14 +153,12 @@ void omap1_pm_idle(void) omap_writel(saved_idlect1, ARM_IDLECT1); local_fiq_enable(); - local_irq_enable(); return; } omap_sram_suspend(omap_readl(ARM_IDLECT1), omap_readl(ARM_IDLECT2)); local_fiq_enable(); - local_irq_enable(); } /* @@ -583,8 +577,6 @@ static void omap_pm_init_proc(void) #endif /* DEBUG && CONFIG_PROC_FS */ -static void (*saved_idle)(void) = NULL; - /* * omap_pm_prepare - Do preliminary suspend work. * @@ -592,8 +584,7 @@ static void (*saved_idle)(void) = NULL; static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - saved_idle = pm_idle; - pm_idle = NULL; + disable_hlt(); return 0; } @@ -630,7 +621,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - pm_idle = saved_idle; + enable_hlt(); } @@ -687,7 +678,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - pm_idle = omap1_pm_idle; + arm_pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index 91d199b64979..f255b153b863 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -4,9 +4,10 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <mach/hardware.h> #include <plat/prcm.h> +#include <mach/hardware.h> + void omap1_restart(char mode, const char *cmd) { /* diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index c875bdc902c5..0779db150da7 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -33,8 +33,12 @@ */ #include <linux/linkage.h> + #include <asm/assembler.h> + #include <mach/io.h> + +#include "iomap.h" #include "pm.h" .text diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S index 692587d07ea5..2ce0b9ab20e5 100644 --- a/arch/arm/mach-omap1/sram.S +++ b/arch/arm/mach-omap1/sram.S @@ -9,10 +9,14 @@ */ #include <linux/linkage.h> + #include <asm/assembler.h> + #include <mach/io.h> #include <mach/hardware.h> +#include "iomap.h" + .text /* diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index b8faffa44f9e..4d8dd9a1b04c 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -44,15 +44,15 @@ #include <linux/clockchips.h> #include <linux/io.h> -#include <asm/system.h> -#include <mach/hardware.h> #include <asm/leds.h> #include <asm/irq.h> #include <asm/sched_clock.h> +#include <mach/hardware.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include "iomap.h" #include "common.h" #ifdef CONFIG_OMAP_MPU_TIMER diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 9a54ef4dcf5e..325b9a0aa4a0 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -46,15 +46,17 @@ #include <linux/clockchips.h> #include <linux/io.h> -#include <asm/system.h> -#include <mach/hardware.h> #include <asm/leds.h> #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include "common.h" + #include <plat/dmtimer.h> +#include <mach/hardware.h> + +#include "common.h" + /* * --------------------------------------------------------------------------- * 32KHz OS timer diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e20c8ab80b0e..8141b76283a6 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -32,7 +32,7 @@ config ARCH_OMAP3 depends on ARCH_OMAP2PLUS default y select CPU_V7 - select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARCH_HAS_OPP select PM_OPP if PM select ARM_CPU_SUSPEND if PM @@ -52,7 +52,7 @@ config ARCH_OMAP4 select ARM_ERRATA_720789 select ARCH_HAS_OPP select PM_OPP if PM - select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" @@ -117,7 +117,6 @@ comment "OMAP Board Type" config MACH_OMAP_GENERIC bool "Generic OMAP2+ board" depends on ARCH_OMAP2PLUS - select USE_OF default y help Support for generic TI OMAP2+ boards using Flattened Device Tree. @@ -245,10 +244,11 @@ config MACH_NOKIA_N8X0 select MACH_NOKIA_N810_WIMAX config MACH_NOKIA_RM680 - bool "Nokia RM-680 board" + bool "Nokia RM-680/696 board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select MACH_NOKIA_RM696 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index bd76394ccaf8..49f92bc1c311 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ @@ -17,13 +17,14 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +obj-y += mcbsp.o +endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o -obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o \ sleep44xx.o @@ -182,9 +183,6 @@ obj-$(CONFIG_OMAP_IOMMU) += iommu2.o iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) -i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o -obj-y += $(i2c-omap-m) $(i2c-omap-y) - ifneq ($(CONFIG_TIDSPBRIDGE),) obj-y += dsp.o endif @@ -268,6 +266,11 @@ obj-y += $(smc91x-m) $(smc91x-y) smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) -obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o +ifneq ($(CONFIG_HWSPINLOCK_OMAP),) +obj-y += hwspinlock.o +endif + +emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o +obj-y += $(emac-m) $(emac-y) obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c new file mode 100644 index 000000000000..1f97e7475206 --- /dev/null +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -0,0 +1,117 @@ +/* + * Copyright (C) 2011 Ilya Yanok, Emcraft Systems + * + * Based on mach-omap2/board-am3517evm.c + * Copyright (C) 2009 Texas Instruments Incorporated + * Author: Ranjith Lohithakshan <ranjithl@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/davinci_emac.h> +#include <linux/platform_device.h> +#include <plat/irqs.h> +#include <mach/am35xx.h> + +#include "control.h" + +static struct mdio_platform_data am35xx_emac_mdio_pdata; + +static struct resource am35xx_emac_mdio_resources[] = { + DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K), +}; + +static struct platform_device am35xx_emac_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources), + .resource = am35xx_emac_mdio_resources, + .dev.platform_data = &am35xx_emac_mdio_pdata, +}; + +static void am35xx_enable_emac_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR | + AM35XX_CPGMAC_C0_MISC_PULSE_CLR | + AM35XX_CPGMAC_C0_RX_THRESH_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +static void am35xx_disable_emac_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +static struct emac_platform_data am35xx_emac_pdata = { + .ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET, + .ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE, + .hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR, + .version = EMAC_VERSION_2, + .interrupt_enable = am35xx_enable_emac_int, + .interrupt_disable = am35xx_disable_emac_int, +}; + +static struct resource am35xx_emac_resources[] = { + DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ), +}; + +static struct platform_device am35xx_emac_device = { + .name = "davinci_emac", + .id = -1, + .num_resources = ARRAY_SIZE(am35xx_emac_resources), + .resource = am35xx_emac_resources, + .dev = { + .platform_data = &am35xx_emac_pdata, + }, +}; + +void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) +{ + unsigned int regval; + int err; + + am35xx_emac_pdata.rmii_en = rmii_en; + am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq; + err = platform_device_register(&am35xx_emac_device); + if (err) { + pr_err("AM35x: failed registering EMAC device: %d\n", err); + return; + } + + err = platform_device_register(&am35xx_emac_mdio_device); + if (err) { + pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err); + platform_device_unregister(&am35xx_emac_device); + return; + } + + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); + omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); +} diff --git a/arch/arm/mach-omap2/am35xx-emac.h b/arch/arm/mach-omap2/am35xx-emac.h new file mode 100644 index 000000000000..15c6f9ce59a2 --- /dev/null +++ b/arch/arm/mach-omap2/am35xx-emac.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2011 Ilya Yanok, Emcraft Systems + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define AM35XX_DEFAULT_MDIO_FREQUENCY 1000000 + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) +void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en); +#else +static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {} +#endif diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 7370983f809f..c8bda62900d8 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -279,7 +279,7 @@ static void __init omap_2430sdp_init(void) platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 383717ba63b9..da75f239873e 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -232,11 +232,13 @@ static struct omap2_hsmmc_info mmc[] = { */ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 4, + .deferred = true, }, { .mmc = 2, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 7, + .deferred = true, }, {} /* Terminator */ }; @@ -249,7 +251,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev, */ mmc[0].gpio_cd = gpio + 0; mmc[1].gpio_cd = gpio + 1; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); @@ -606,6 +608,7 @@ static void __init omap_3430sdp_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); + omap_hsmmc_init(mmc); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 4e9071589bfb..37dcb1bc025e 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -25,6 +25,7 @@ #include <linux/regulator/fixed.h> #include <linux/leds.h> #include <linux/leds_pwm.h> +#include <linux/platform_data/omap4-keypad.h> #include <mach/hardware.h> #include <asm/hardware/gic.h> @@ -41,6 +42,7 @@ #include <video/omap-panel-nokia-dsi.h> #include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> +#include <linux/platform_data/omap-abe-twl6040.h> #include "mux.h" #include "hsmmc.h" @@ -322,7 +324,10 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = { .bus_num = 1, .chip_select = 0, .max_speed_hz = 24000000, - .irq = ETH_KS8851_IRQ, + /* + * .irq is set to gpio_to_irq(ETH_KS8851_IRQ) + * in omap_4430sdp_init + */ }, }; @@ -378,12 +383,40 @@ static struct platform_device sdp4430_dmic_codec = { .id = -1, }; +static struct omap_abe_twl6040_data sdp4430_abe_audio_data = { + .card_name = "SDP4430", + .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + .has_ep = 1, + .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + .has_vibra = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + + .has_dmic = 1, + .has_hsmic = 1, + .has_mainmic = 1, + .has_submic = 1, + .has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + + .jack_detection = 1, + /* MCLK input is 38.4MHz */ + .mclk_freq = 38400000, +}; + +static struct platform_device sdp4430_abe_audio = { + .name = "omap-abe-twl6040", + .id = -1, + .dev = { + .platform_data = &sdp4430_abe_audio_data, + }, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, &sdp4430_vbat, &sdp4430_dmic_codec, + &sdp4430_abe_audio, }; static struct omap_musb_board_data musb_board_data = { @@ -457,21 +490,22 @@ static struct platform_device omap_vwlan_device = { static int omap4_twl6030_hsmmc_late_init(struct device *dev) { - int ret = 0; + int irq = 0; struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct omap_mmc_platform_data *pdata = dev->platform_data; /* Setting MMC1 Card detect Irq */ if (pdev->id == 0) { - ret = twl6030_mmc_card_detect_config(); - if (ret) + irq = twl6030_mmc_card_detect_config(); + if (irq < 0) { pr_err("Failed configuring MMC1 card detect\n"); - pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + - MMCDETECT_INTR_OFFSET; + return irq; + } + pdata->slots[0].card_detect_irq = irq; pdata->slots[0].card_detect = twl6030_mmc_card_detect; } - return ret; + return 0; } static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) @@ -491,9 +525,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) { struct omap2_hsmmc_info *c; - omap2_hsmmc_init(controllers); + omap_hsmmc_init(controllers); for (c = controllers; c->mmc; c++) - omap4_twl6030_hsmmc_set_late_init(c->dev); + omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); return 0; } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4b1cfe32e6ba..3645285a3e2b 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -39,124 +39,11 @@ #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-dvi.h> +#include "am35xx-emac.h" #include "mux.h" #include "control.h" #include "hsmmc.h" -#define AM35XX_EVM_MDIO_FREQUENCY (1000000) - -static struct mdio_platform_data am3517_evm_mdio_pdata = { - .bus_freq = AM35XX_EVM_MDIO_FREQUENCY, -}; - -static struct resource am3517_mdio_resources[] = { - { - .start = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, - .end = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET + - SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device am3517_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(am3517_mdio_resources), - .resource = am3517_mdio_resources, - .dev.platform_data = &am3517_evm_mdio_pdata, -}; - -static struct emac_platform_data am3517_evm_emac_pdata = { - .rmii_en = 1, -}; - -static struct resource am3517_emac_resources[] = { - { - .start = AM35XX_IPSS_EMAC_BASE, - .end = AM35XX_IPSS_EMAC_BASE + 0x2FFFF, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_35XX_EMAC_C0_RXTHRESH_IRQ, - .end = INT_35XX_EMAC_C0_RXTHRESH_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = INT_35XX_EMAC_C0_RX_PULSE_IRQ, - .end = INT_35XX_EMAC_C0_RX_PULSE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = INT_35XX_EMAC_C0_TX_PULSE_IRQ, - .end = INT_35XX_EMAC_C0_TX_PULSE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, - .end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device am3517_emac_device = { - .name = "davinci_emac", - .id = -1, - .num_resources = ARRAY_SIZE(am3517_emac_resources), - .resource = am3517_emac_resources, -}; - -static void am3517_enable_ethernet_int(void) -{ - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR | - AM35XX_CPGMAC_C0_MISC_PULSE_CLR | - AM35XX_CPGMAC_C0_RX_THRESH_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); -} - -static void am3517_disable_ethernet_int(void) -{ - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); -} - -static void am3517_evm_ethernet_init(struct emac_platform_data *pdata) -{ - unsigned int regval; - - pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET; - pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET; - pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET; - pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE; - pdata->version = EMAC_VERSION_2; - pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR; - pdata->interrupt_enable = am3517_enable_ethernet_int; - pdata->interrupt_disable = am3517_disable_ethernet_int; - am3517_emac_device.dev.platform_data = pdata; - platform_device_register(&am3517_emac_device); - platform_device_register(&am3517_mdio_device); - clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev), - NULL, &am3517_emac_device.dev); - - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); - omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - - return ; -} - - - #define LCD_PANEL_PWR 176 #define LCD_PANEL_BKLIGHT_PWR 182 #define LCD_PANEL_PWM 181 @@ -498,13 +385,13 @@ static void __init am3517_evm_init(void) i2c_register_board_info(1, am3517evm_i2c1_boardinfo, ARRAY_SIZE(am3517evm_i2c1_boardinfo)); /*Ethernet*/ - am3517_evm_ethernet_init(&am3517_evm_emac_pdata); + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); /* MUSB */ am3517_evm_musb_init(); /* MMC init function */ - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index d73316ed4207..41b0a2fe0b04 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -280,7 +280,6 @@ static struct omap_dss_board_info cm_t35_dss_data = { static struct omap2_mcspi_device_config tdo24m_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ }; static struct tdo24m_platform_data tdo24m_config = { @@ -413,7 +412,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, - + .deferred = true, }, { .mmc = 2, @@ -471,7 +470,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); return 0; } @@ -639,6 +638,7 @@ static void __init cm_t3x_common_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); + omap_hsmmc_init(mmc); cm_t35_init_i2c(); omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index f36d694d2159..9e66e167e4f3 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -49,6 +49,7 @@ #include "mux.h" #include "control.h" #include "common-board-devices.h" +#include "am35xx-emac.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -291,6 +292,7 @@ static void __init cm_t3517_init(void) cm_t3517_init_rtc(); cm_t3517_init_usbh(); cm_t3517_init_hecc(); + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } MACHINE_START(CM_T3517, "Compulab CM-T3517") diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e873063f4fda..11cd2a806093 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, + .deferred = true, }, {} /* Terminator */ }; @@ -228,7 +229,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -636,6 +637,7 @@ static void __init devkit8000_init(void) omap_dm9000_init(); + omap_hsmmc_init(mmc); devkit8000_i2c_init(); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 30a6f527510c..0349fd2b68d8 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -189,7 +189,7 @@ unmap: * * @return - void. */ -void board_flash_init(struct flash_partitions partition_info[], +void __init board_flash_init(struct flash_partitions partition_info[], char chip_sel_board[][GPMC_CS_NUM], int nand_type) { u8 cs = 0; diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 45fdfe2bd9d5..74e1687b5170 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include <linux/io.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/irqdomain.h> #include <linux/i2c/twl.h> @@ -24,33 +25,23 @@ #include "common.h" #include "common-board-devices.h" -/* - * XXX: Still needed to boot until the i2c & twl driver is adapted to - * device-tree - */ -#ifdef CONFIG_ARCH_OMAP4 -static struct twl4030_platform_data sdp4430_twldata = { - .irq_base = TWL6030_IRQ_BASE, - .irq_end = TWL6030_IRQ_END, -}; - -static void __init omap4_i2c_init(void) -{ - omap4_pmic_init("twl6030", &sdp4430_twldata); -} +#if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) +#define omap_intc_of_init NULL +#endif +#ifndef CONFIG_ARCH_OMAP4 +#define gic_of_init NULL #endif -#ifdef CONFIG_ARCH_OMAP3 -static struct twl4030_platform_data beagle_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, +static struct of_device_id irq_match[] __initdata = { + { .compatible = "ti,omap2-intc", .data = omap_intc_of_init, }, + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + { } }; -static void __init omap3_i2c_init(void) +static void __init omap_init_irq(void) { - omap3_pmic_init("twl4030", &beagle_twldata); + of_irq_init(irq_match); } -#endif static struct of_device_id omap_dt_match_table[] __initdata = { { .compatible = "simple-bus", }, @@ -58,51 +49,24 @@ static struct of_device_id omap_dt_match_table[] __initdata = { { } }; -static struct of_device_id intc_match[] __initdata = { - { .compatible = "ti,omap3-intc", }, - { .compatible = "arm,cortex-a9-gic", }, - { } -}; - static void __init omap_generic_init(void) { - struct device_node *node = of_find_matching_node(NULL, intc_match); - if (node) - irq_domain_add_legacy(node, 32, 0, 0, &irq_domain_simple_ops, NULL); - omap_sdrc_init(NULL, NULL); of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); } -#ifdef CONFIG_ARCH_OMAP4 -static void __init omap4_init(void) -{ - omap4_i2c_init(); - omap_generic_init(); -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 -static void __init omap3_init(void) -{ - omap3_i2c_init(); - omap_generic_init(); -} -#endif - -#if defined(CONFIG_SOC_OMAP2420) +#ifdef CONFIG_SOC_OMAP2420 static const char *omap242x_boards_compat[] __initdata = { "ti,omap2420", NULL, }; DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") - .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap242x_map_io, .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, + .init_irq = omap_init_irq, .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, @@ -111,18 +75,17 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") MACHINE_END #endif -#if defined(CONFIG_SOC_OMAP2430) +#ifdef CONFIG_SOC_OMAP2430 static const char *omap243x_boards_compat[] __initdata = { "ti,omap2430", NULL, }; DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") - .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap243x_map_io, .init_early = omap2430_init_early, - .init_irq = omap2_init_irq, + .init_irq = omap_init_irq, .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, @@ -131,18 +94,33 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") MACHINE_END #endif -#if defined(CONFIG_ARCH_OMAP3) +#ifdef CONFIG_ARCH_OMAP3 +static struct twl4030_platform_data beagle_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, +}; + +static void __init omap3_i2c_init(void) +{ + omap3_pmic_init("twl4030", &beagle_twldata); +} + +static void __init omap3_init(void) +{ + omap3_i2c_init(); + omap_generic_init(); +} + static const char *omap3_boards_compat[] __initdata = { "ti,omap3", NULL, }; DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") - .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, + .init_irq = omap_init_irq, .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_init, .timer = &omap3_timer, @@ -151,18 +129,33 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") MACHINE_END #endif -#if defined(CONFIG_ARCH_OMAP4) +#ifdef CONFIG_ARCH_OMAP4 +static struct twl4030_platform_data sdp4430_twldata = { + .irq_base = TWL6030_IRQ_BASE, + .irq_end = TWL6030_IRQ_END, +}; + +static void __init omap4_i2c_init(void) +{ + omap4_pmic_init("twl6030", &sdp4430_twldata); +} + +static void __init omap4_init(void) +{ + omap4_i2c_init(); + omap_generic_init(); +} + static const char *omap4_boards_compat[] __initdata = { "ti,omap4", NULL, }; DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") - .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap4_map_io, .init_early = omap4430_init_early, - .init_irq = gic_init_irq, + .init_irq = omap_init_irq, .handle_irq = gic_handle_irq, .init_machine = omap4_init, .timer = &omap4_timer, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index a59ace0ed560..e558800adfdf 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -295,6 +295,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .deferred = true, }, #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) { @@ -402,7 +403,7 @@ static int igep_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) @@ -639,6 +640,9 @@ static void __init igep_init(void) /* Get IGEP2 hardware revision */ igep2_get_revision(); + + omap_hsmmc_init(mmc); + /* Register I2C busses and drivers */ igep_i2c_init(); platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 2d2a61f7dcbf..d50a562adfa0 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -27,7 +27,6 @@ #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/mmc/host.h> -#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -424,7 +423,7 @@ static void __init omap_ldp_init(void) board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); ldp_display_init(); } diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 672262717601..518091c5f77c 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -36,10 +36,6 @@ #include "mux.h" -static int slot1_cover_open; -static int slot2_cover_open; -static struct device *mmc_device; - #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 #define TUSB6010_GPIO_INT 58 @@ -137,7 +133,6 @@ static void __init n8x0_usb_init(void) {} static struct omap2_mcspi_device_config p54spi_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct spi_board_info n800_spi_board_info[] __initdata = { @@ -211,6 +206,10 @@ static struct omap_onenand_platform_data board_onenand_data[] = { #define N810_EMMC_VSD_GPIO 23 #define N810_EMMC_VIO_GPIO 9 +static int slot1_cover_open; +static int slot2_cover_open; +static struct device *mmc_device; + static int n8x0_mmc_switch_slot(struct device *dev, int slot) { #ifdef CONFIG_MMC_DEBUG diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7ffcd2839e7b..7be8d659d91d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -253,6 +253,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = -EINVAL, + .deferred = true, }, {} /* Terminator */ }; @@ -272,12 +273,10 @@ static int beagle_twl_gpio_setup(struct device *dev, { int r; - if (beagle_config.mmc1_gpio_wp != -EINVAL) - omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active @@ -521,6 +520,11 @@ static void __init omap3_beagle_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); + + if (beagle_config.mmc1_gpio_wp != -EINVAL) + omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); + omap_hsmmc_init(mmc); + omap3_beagle_i2c_init(); gpio_buttons[0].gpio = beagle_config.usr_button_gpio; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c877236a8442..a659e198892b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -317,6 +317,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 63, + .deferred = true, }, #ifdef CONFIG_WL12XX_PLATFORM_DATA { @@ -361,9 +362,8 @@ static int omap3evm_twl_gpio_setup(struct device *dev, int r, lcd_bl_en; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* * Most GPIOs are for USB OTG. Some are mostly sent to @@ -644,6 +644,9 @@ static void __init omap3_evm_init(void) omap_board_config = omap3_evm_config; omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + omap_mux_init_gpio(63, OMAP_PIN_INPUT); + omap_hsmmc_init(mmc); + omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 4198dd017d8f..4a7d8c8a75da 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -128,7 +128,7 @@ static void __init board_mmc_init(void) return; } - omap2_hsmmc_init(board_mmc_info); + omap_hsmmc_init(board_mmc_info); } static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { @@ -205,6 +205,7 @@ static void __init omap3logic_init(void) MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .atag_offset = 0x100, + .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, @@ -216,6 +217,7 @@ MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .atag_offset = 0x100, + .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1644b73017fc..33d995d0f075 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -121,6 +121,11 @@ static struct platform_device pandora_leds_gpio = { }, }; +static struct platform_device pandora_backlight = { + .name = "pandora-backlight", + .id = -1, +}; + #define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \ { \ .gpio = gpio_num, \ @@ -273,6 +278,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { .gpio_cd = -EINVAL, .gpio_wp = 126, .ext_clock = 0, + .deferred = true, }, { .mmc = 2, @@ -281,6 +287,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { .gpio_wp = 127, .ext_clock = 1, .transceiver = true, + .deferred = true, }, { .mmc = 3, @@ -300,7 +307,7 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */ omap3pandora_mmc[0].gpio_cd = gpio + 0; omap3pandora_mmc[1].gpio_cd = gpio + 1; - omap2_hsmmc_init(omap3pandora_mmc); + omap_hsmmc_late_init(omap3pandora_mmc); /* gpio + 13 drives 32kHz buffer for wifi module */ gpio_32khz = gpio + 13; @@ -343,7 +350,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"), + REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -476,6 +483,10 @@ static struct platform_device pandora_vwlan_device = { static struct twl4030_bci_platform_data pandora_bci_data; +static struct twl4030_power_data pandora_power_data = { + .use_poweroff = true, +}; + static struct twl4030_platform_data omap3pandora_twldata = { .gpio = &omap3pandora_gpio_data, .vmmc1 = &pandora_vmmc1, @@ -486,6 +497,7 @@ static struct twl4030_platform_data omap3pandora_twldata = { .vsim = &pandora_vsim, .keypad = &pandora_kp_data, .bci = &pandora_bci_data, + .power = &pandora_power_data, }; static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { @@ -557,17 +569,18 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, &pandora_vwlan_device, + &pandora_backlight, }; static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, - .reset_gpio_port[0] = 16, - .reset_gpio_port[1] = -EINVAL, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 16, .reset_gpio_port[2] = -EINVAL }; @@ -580,6 +593,7 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_hsmmc_init(omap3pandora_mmc); omap3pandora_i2c_init(); pandora_wl1251_init(); platform_add_devices(omap3pandora_devices, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index cb089a46f62f..641004380795 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -209,10 +209,11 @@ static struct regulator_init_data omap3stalker_vsim = { static struct omap2_hsmmc_info mmc[] = { { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 23, + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = 23, + .deferred = true, }, {} /* Terminator */ }; @@ -282,9 +283,8 @@ omap3stalker_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* * Most GPIOs are for USB OTG. Some are mostly sent to @@ -425,6 +425,9 @@ static void __init omap3_stalker_init(void) omap_board_config = omap3_stalker_config; omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + omap_hsmmc_init(mmc); + omap3_stalker_i2c_init(); platform_add_devices(omap3_stalker_devices, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index a0b851aafcca..ae2251fa4a69 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -42,6 +42,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> +#include <asm/system_info.h> #include <plat/board.h> #include "common.h" @@ -100,6 +101,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, + .deferred = true, }, {} /* Terminator */ }; @@ -117,15 +119,9 @@ static struct gpio_led gpio_leds[]; static int touchbook_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -351,6 +347,14 @@ static void __init omap3_touchbook_init(void) pm_power_off = omap3_touchbook_poweroff; + if (system_rev >= 0x20 && system_rev <= 0x34301000) { + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + mmc[0].gpio_wp = 23; + } else { + omap_mux_init_gpio(29, OMAP_PIN_INPUT); + } + omap_hsmmc_init(mmc); + omap3_touchbook_i2c_init(); platform_add_devices(omap3_touchbook_devices, ARRAY_SIZE(omap3_touchbook_devices)); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 28fc271f7031..8bf8e99c358e 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -28,6 +28,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> +#include <linux/platform_data/omap-abe-twl6040.h> #include <mach/hardware.h> #include <asm/hardware/gic.h> @@ -91,9 +92,40 @@ static struct platform_device leds_gpio = { }, }; +static struct omap_abe_twl6040_data panda_abe_audio_data = { + /* Audio out */ + .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* HandsFree through expasion connector */ + .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */ + .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* PandaBoard: FM RX, PandaBoardES: audio in */ + .has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* No jack detection. */ + .jack_detection = 0, + /* MCLK input is 38.4MHz */ + .mclk_freq = 38400000, + +}; + +static struct platform_device panda_abe_audio = { + .name = "omap-abe-twl6040", + .id = -1, + .dev = { + .platform_data = &panda_abe_audio_data, + }, +}; + +static struct platform_device btwilink_device = { + .name = "btwilink", + .id = -1, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, + &panda_abe_audio, + &btwilink_device, }; static const struct usbhs_omap_board_data usbhs_bdata __initconst = { @@ -206,7 +238,7 @@ struct wl12xx_platform_data omap_panda_wlan_data __initdata = { static int omap4_twl6030_hsmmc_late_init(struct device *dev) { - int ret = 0; + int irq = 0; struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct omap_mmc_platform_data *pdata = dev->platform_data; @@ -217,14 +249,15 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev) } /* Setting MMC1 Card detect Irq */ if (pdev->id == 0) { - ret = twl6030_mmc_card_detect_config(); - if (ret) + irq = twl6030_mmc_card_detect_config(); + if (irq < 0) { dev_err(dev, "%s: Error card detect config(%d)\n", - __func__, ret); - else - pdata->slots[0].card_detect = twl6030_mmc_card_detect; + __func__, irq); + return irq; + } + pdata->slots[0].card_detect = twl6030_mmc_card_detect; } - return ret; + return 0; } static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) @@ -245,15 +278,32 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) { struct omap2_hsmmc_info *c; - omap2_hsmmc_init(controllers); + omap_hsmmc_init(controllers); for (c = controllers; c->mmc; c++) - omap4_twl6030_hsmmc_set_late_init(c->dev); + omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); return 0; } +static struct twl4030_codec_data twl6040_codec = { + /* single-step ramp for headset and handsfree */ + .hs_left_step = 0x0f, + .hs_right_step = 0x0f, + .hf_left_step = 0x1d, + .hf_right_step = 0x1d, +}; + +static struct twl4030_audio_data twl6040_audio = { + .codec = &twl6040_codec, + .audpwron_gpio = 127, + .naudint_irq = OMAP44XX_IRQ_SYS_2N, + .irq_base = TWL6040_CODEC_IRQ_BASE, +}; + /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata; +static struct twl4030_platform_data omap4_panda_twldata = { + .audio = &twl6040_audio, +}; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -461,7 +511,7 @@ static struct omap_dss_board_info omap4_panda_dss_data = { .default_device = &omap4_panda_dvi_device, }; -void omap4_panda_display_init(void) +void __init omap4_panda_display_init(void) { int r; @@ -485,6 +535,20 @@ void omap4_panda_display_init(void) omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } +static void omap4_panda_init_rev(void) +{ + if (cpu_is_omap443x()) { + /* PandaBoard 4430 */ + /* ASoC audio configuration */ + panda_abe_audio_data.card_name = "PandaBoard"; + panda_abe_audio_data.has_hsmic = 1; + } else { + /* PandaBoard ES */ + /* ASoC audio configuration */ + panda_abe_audio_data.card_name = "PandaBoardES"; + } +} + static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; @@ -498,6 +562,7 @@ static void __init omap4_panda_init(void) if (ret) pr_err("error setting wl12xx data: %d\n", ret); + omap4_panda_init_rev(); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52c0cef77165..668533e2a379 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -407,8 +407,6 @@ static inline void __init overo_init_keys(void) { return; } static int overo_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - omap2_hsmmc_init(mmc); - #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -505,6 +503,7 @@ static void __init overo_init(void) int ret; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_hsmmc_init(mmc); overo_i2c_init(); omap_display_init(&overo_dss_data); omap_serial_init(); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 8678b386c6a2..ae53d71f0ce0 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -1,5 +1,5 @@ /* - * Board support file for Nokia RM-680. + * Board support file for Nokia RM-680/696. * * Copyright (C) 2010 Nokia * @@ -120,7 +120,7 @@ static void __init rm680_peripherals_init(void) ARRAY_SIZE(rm680_peripherals_devices)); rm680_i2c_init(); gpmc_onenand_init(board_onenand_data); - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); } #ifdef CONFIG_OMAP_MUX @@ -154,3 +154,15 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .timer = &omap3_timer, .restart = omap_prcm_restart, MACHINE_END + +MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") + .atag_offset = 0x100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, + .init_machine = rm680_init, + .timer = &omap3_timer, + .restart = omap_prcm_restart, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index acb4e77b39ef..f120997309af 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -25,6 +25,7 @@ #include <linux/gpio_keys.h> #include <linux/mmc/host.h> #include <linux/power/isp1704_charger.h> +#include <asm/system_info.h> #include <plat/mcspi.h> #include <plat/board.h> @@ -138,17 +139,14 @@ static struct lp5523_platform_data rx51_lp5523_platform_data = { static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct omap2_mcspi_device_config mipid_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct omap2_mcspi_device_config tsc2005_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, }; static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { @@ -1105,6 +1103,11 @@ static struct tsc2005_platform_data tsc2005_pdata = { .esd_timeout_ms = 8000, }; +static struct gpio rx51_tsc2005_gpios[] __initdata = { + { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, + { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, +}; + static void rx51_tsc2005_set_reset(bool enable) { gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); @@ -1114,20 +1117,18 @@ static void __init rx51_init_tsc2005(void) { int r; - r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ"); - if (r < 0) { - printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ"); - rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0; - } + omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); - r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, - "tsc2005 reset"); - if (r >= 0) { - tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; - } else { - printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset"); + r = gpio_request_array(rx51_tsc2005_gpios, + ARRAY_SIZE(rx51_tsc2005_gpios)); + if (r < 0) { + printk(KERN_ERR "tsc2005 board initialization failed\n"); tsc2005_pdata.esd_timeout_ms = 0; + return; } + + tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; } void __init rx51_peripherals_init(void) @@ -1145,7 +1146,7 @@ void __init rx51_peripherals_init(void) partition = omap_mux_get("core"); if (partition) - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); rx51_charger_init(); } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index d4683ba5f721..a43a765dd092 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -55,6 +55,7 @@ static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) { +#ifdef CONFIG_TWL4030_CORE unsigned char c; u8 mux_pwm, enb_pwm; @@ -90,6 +91,9 @@ static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) c = ((50 * (100 - level)) / 100) + 1; twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF); twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON); +#else + pr_warn("Backlight not enabled\n"); +#endif return 0; } @@ -117,7 +121,6 @@ static struct omap_dss_board_info zoom_dss_data = { static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { .turbo_mode = 1, - .single_channel = 1, /* 0: slave, 1: master */ }; static struct spi_board_info nec_8048_spi_board_info[] __initdata = { diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index c126461836ac..3d39cdb2e250 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -205,6 +205,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .power_saving = true, + .deferred = true, }, { .name = "internal", @@ -233,7 +234,7 @@ static int zoom_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable"); @@ -301,6 +302,7 @@ void __init zoom_peripherals_init(void) if (ret) pr_err("error setting wl12xx data: %d\n", ret); + omap_hsmmc_init(mmc); omap_i2c_init(); platform_device_register(&omap_vwlan_device); usb_musb_init(NULL); diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 39f9d5a58d0c..7072e0d651b1 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -33,6 +33,7 @@ #include <linux/cpufreq.h> #include <linux/slab.h> +#include <plat/cpu.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/sdrc.h> diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index e25364de028a..04d551b1f7f7 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -43,6 +43,7 @@ #include <linux/errno.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/bug.h> #include <plat/clock.h> diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index e069a9be93df..cd7fd0f91149 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -22,6 +22,7 @@ #include <asm/div64.h> #include <plat/clock.h> +#include <plat/cpu.h> #include "clock.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 61ad3855f10a..bace9308a4db 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -14,11 +14,14 @@ */ #include <linux/kernel.h> +#include <linux/io.h> #include <linux/clk.h> #include <linux/list.h> +#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c index d87bc9cb2a36..dfda9a3f2cb2 100644 --- a/arch/arm/mach-omap2/clock2430.c +++ b/arch/arm/mach-omap2/clock2430.c @@ -21,8 +21,10 @@ #include <linux/clk.h> #include <linux/io.h> +#include <plat/hardware.h> #include <plat/clock.h> +#include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 0cc12879e7b9..3b4d09a50399 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -17,8 +17,10 @@ #include <linux/clk.h> #include <linux/list.h> +#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 80bb0f0e92e6..12500097378d 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -22,6 +22,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include <plat/cpu.h> #include <plat/clock.h> #include "clock.h" diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 952c3e01c9eb..794d82702c85 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -21,6 +21,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include <plat/hardware.h> #include <plat/clock.h> #include "clock.h" diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d75e5f6b8a01..981b9f9111a4 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -20,14 +20,15 @@ #include <linux/clk.h> #include <linux/list.h> +#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "iomap.h" #include "clock.h" #include "clock3xxx.h" #include "clock34xx.h" #include "clock36xx.h" #include "clock3517.h" - #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 08e86d793a1f..79b98f22f207 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -26,8 +26,11 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/clk.h> + +#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "iomap.h" #include "clock.h" #include "clock44xx.h" #include "cm1_44xx.h" diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 04d39cdd2112..389f9f8b570c 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -18,8 +18,10 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" +#include <plat/hardware.h> +#include "iomap.h" +#include "common.h" #include "cm.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c index 6a836303252c..535d66e2822c 100644 --- a/arch/arm/mach-omap2/cm44xx.c +++ b/arch/arm/mach-omap2/cm44xx.c @@ -18,8 +18,8 @@ #include <linux/err.h> #include <linux/io.h> +#include "iomap.h" #include "common.h" - #include "cm.h" #include "cm1_44xx.h" #include "cm2_44xx.h" diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 6204deaf85b1..bd8810c3753f 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -20,8 +20,8 @@ #include <linux/err.h> #include <linux/io.h> +#include "iomap.h" #include "common.h" - #include "cm.h" #include "cm1_44xx.h" #include "cm2_44xx.h" diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index bcb0c5817167..9498b0f5fbd0 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -33,7 +33,6 @@ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ }; static struct ads7846_platform_data ads7846_config = { @@ -76,13 +75,15 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, gpio_set_debounce(gpio_pendown, gpio_debounce); } - ads7846_config.gpio_pendown = gpio_pendown; - spi_bi->bus_num = bus_num; spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); - if (board_pdata) + if (board_pdata) { + board_pdata->gpio_pendown = gpio_pendown; spi_bi->platform_data = board_pdata; + } else { + ads7846_config.gpio_pendown = gpio_pendown; + } spi_register_board_info(&ads7846_spi_board_info, 1); } diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index aaf421178c91..1549c11000d3 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -17,12 +17,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include "common.h" +#include <plat/hardware.h> #include <plat/board.h> #include <plat/mux.h> - #include <plat/clock.h> +#include "iomap.h" +#include "common.h" #include "sdrc.h" #include "control.h" diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 7e9338e8d684..57da7f406e28 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -134,6 +134,8 @@ void omap4_map_io(void); void ti81xx_map_io(void); void omap_barriers_init(void); +extern void __init omap_init_consistent_dma_size(void); + /** * omap_test_timeout - busy-loop, testing a condition * @cond: condition to test until it evaluates to true @@ -175,6 +177,18 @@ void omap3_intc_handle_irq(struct pt_regs *regs); extern void __iomem *omap4_get_l2cache_base(void); #endif +struct device_node; +#ifdef CONFIG_OF +int __init omap_intc_of_init(struct device_node *node, + struct device_node *parent); +#else +int __init omap_intc_of_init(struct device_node *node, + struct device_node *parent) +{ + return 0; +} +#endif + #ifdef CONFIG_SMP extern void __iomem *omap4_get_scu_base(void); #else @@ -236,5 +250,10 @@ static inline u32 omap4_mpuss_read_prev_context_state(void) return 0; } #endif + +struct omap_sdrc_params; +extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 114c037e433c..08e674bb0417 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -15,9 +15,11 @@ #include <linux/kernel.h> #include <linux/io.h> -#include "common.h" +#include <plat/hardware.h> #include <plat/sdrc.h> +#include "iomap.h" +#include "common.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 0ba68d3764bc..a406fd045ce1 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -16,7 +16,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H #define __ARCH_ARM_MACH_OMAP2_CONTROL_H -#include <mach/io.h> #include <mach/ctrl_module_core_44xx.h> #include <mach/ctrl_module_wkup_44xx.h> #include <mach/ctrl_module_pad_core_44xx.h> @@ -339,6 +338,11 @@ #define AM35XX_VPFE_PCLK_SW_RST BIT(4) /* + * CONTROL AM33XX STATUS register + */ +#define AM33XX_CONTROL_STATUS 0x040 + +/* * CONTROL OMAP STATUS register to identify OMAP3 features */ #define OMAP3_CONTROL_OMAP_STATUS 0x044c diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 283d11eae693..e4336035c0ea 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -17,6 +17,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/platform_data/omap4-keypad.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -24,9 +25,8 @@ #include <asm/mach/map.h> #include <asm/pmu.h> -#include <plat/tc.h> +#include "iomap.h" #include <plat/board.h> -#include <plat/mcbsp.h> #include <plat/mmc.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> @@ -276,7 +276,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data } #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) -static inline void omap_init_mbox(void) +static inline void __init omap_init_mbox(void) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -304,29 +304,8 @@ static struct platform_device omap_pcm = { .id = -1, }; -/* - * OMAP2420 has 2 McBSP ports - * OMAP2430 has 5 McBSP ports - * OMAP3 has 5 McBSP ports - * OMAP4 has 4 McBSP ports - */ -OMAP_MCBSP_PLATFORM_DEVICE(1); -OMAP_MCBSP_PLATFORM_DEVICE(2); -OMAP_MCBSP_PLATFORM_DEVICE(3); -OMAP_MCBSP_PLATFORM_DEVICE(4); -OMAP_MCBSP_PLATFORM_DEVICE(5); - static void omap_init_audio(void) { - platform_device_register(&omap_mcbsp1); - platform_device_register(&omap_mcbsp2); - if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) { - platform_device_register(&omap_mcbsp3); - platform_device_register(&omap_mcbsp4); - } - if (cpu_is_omap243x() || cpu_is_omap34xx()) - platform_device_register(&omap_mcbsp5); - platform_device_register(&omap_pcm); } @@ -337,7 +316,7 @@ static inline void omap_init_audio(void) {} #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) -static void omap_init_mcpdm(void) +static void __init omap_init_mcpdm(void) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -358,7 +337,7 @@ static inline void omap_init_mcpdm(void) {} #if defined(CONFIG_SND_OMAP_SOC_DMIC) || \ defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE) -static void omap_init_dmic(void) +static void __init omap_init_dmic(void) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -380,7 +359,7 @@ static inline void omap_init_dmic(void) {} #include <plat/mcspi.h> -static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) +static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused) { struct platform_device *pdev; char *name = "omap2_mcspi"; @@ -654,9 +633,7 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) /*-------------------------------------------------------------------------*/ #if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE) -#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) #define OMAP_HDQ_BASE 0x480B2000 -#endif static struct resource omap_hdq_resources[] = { { .start = OMAP_HDQ_BASE, @@ -679,7 +656,10 @@ static struct platform_device omap_hdq_dev = { }; static inline void omap_hdq_init(void) { - (void) platform_device_register(&omap_hdq_dev); + if (cpu_is_omap2420()) + return; + + platform_device_register(&omap_hdq_dev); } #else static inline void omap_hdq_init(void) {} diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 3677b1f58b85..9706c648bc19 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -30,6 +30,7 @@ #include <plat/omap-pm.h> #include "common.h" +#include "iomap.h" #include "mux.h" #include "control.h" #include "display.h" @@ -124,7 +125,7 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) } } -static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) +static int __init omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; u32 pipd_mask, pipd_shift; @@ -157,7 +158,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return 0; } -int omap_hdmi_init(enum omap_hdmi_flags flags) +int __init omap_hdmi_init(enum omap_hdmi_flags flags) { if (cpu_is_omap44xx()) omap4_hdmi_mux_pads(flags); @@ -165,7 +166,7 @@ int omap_hdmi_init(enum omap_hdmi_flags flags) return 0; } -static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) +static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) return omap4_dsi_mux_pads(dsi_id, lane_mask); @@ -173,7 +174,7 @@ static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) return 0; } -static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) +static void __init omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) omap4_dsi_mux_pads(dsi_id, 0); diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index a59a45a0096e..b19d8496c16e 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -227,7 +227,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) dma_stride = OMAP2_DMA_STRIDE; dma_common_ch_start = CSDP; - if (cpu_is_omap3630() || cpu_is_omap4430()) + if (cpu_is_omap3630() || cpu_is_omap44xx()) dma_common_ch_end = CCDN; else dma_common_ch_end = CCFN; diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c index 9c442e290ccb..e28e761b7ab9 100644 --- a/arch/arm/mach-omap2/emu.c +++ b/arch/arm/mach-omap2/emu.c @@ -21,6 +21,10 @@ #include <linux/clk.h> #include <linux/err.h> +#include <mach/hardware.h> + +#include "iomap.h" + MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shishkin"); @@ -30,29 +34,8 @@ MODULE_AUTHOR("Alexander Shishkin"); #define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000) #define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000) -static struct amba_device omap3_etb_device = { - .dev = { - .init_name = "etb", - }, - .res = { - .start = ETB_BASE, - .end = ETB_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .periphid = 0x000bb907, -}; - -static struct amba_device omap3_etm_device = { - .dev = { - .init_name = "etm", - }, - .res = { - .start = ETM_BASE, - .end = ETM_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .periphid = 0x102bb921, -}; +static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL); +static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL); static int __init emu_init(void) { @@ -66,4 +49,3 @@ static int __init emu_init(void) } subsys_initcall(emu_init); - diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 8cbfbc2918ce..2f994e5194e8 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -23,14 +23,18 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include <plat/omap-pm.h> -static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) +#include "powerdomain.h" + +static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) { struct platform_device *pdev; struct omap_gpio_platform_data *pdata; struct omap_gpio_dev_attr *dev_attr; char *name = "omap_gpio"; int id; + struct powerdomain *pwrdm; /* * extract the device id from name field available in the @@ -52,7 +56,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->bank_width = dev_attr->bank_width; pdata->dbck_flag = dev_attr->dbck_flag; pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); - + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); if (!pdata) { pr_err("gpio%d: Memory allocation failed\n", id); @@ -61,8 +65,15 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) switch (oh->class->rev) { case 0: + if (id == 1) + /* non-wakeup GPIO pins for OMAP2 Bank1 */ + pdata->non_wakeup_gpios = 0xe203ffc0; + else if (id == 2) + /* non-wakeup GPIO pins for OMAP2 Bank2 */ + pdata->non_wakeup_gpios = 0x08700040; + /* fall through */ + case 1: - pdata->bank_type = METHOD_GPIO_24XX; pdata->regs->revision = OMAP24XX_GPIO_REVISION; pdata->regs->direction = OMAP24XX_GPIO_OE; pdata->regs->datain = OMAP24XX_GPIO_DATAIN; @@ -72,13 +83,19 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; + pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2; pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; + pdata->regs->ctrl = OMAP24XX_GPIO_CTRL; + pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN; + pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0; + pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1; + pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT; + pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT; break; case 2: - pdata->bank_type = METHOD_GPIO_44XX; pdata->regs->revision = OMAP4_GPIO_REVISION; pdata->regs->direction = OMAP4_GPIO_OE; pdata->regs->datain = OMAP4_GPIO_DATAIN; @@ -88,10 +105,17 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1; pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; + pdata->regs->ctrl = OMAP4_GPIO_CTRL; + pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0; + pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0; + pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1; + pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT; + pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT; break; default: WARN(1, "Invalid gpio bank_type\n"); @@ -99,6 +123,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return -EINVAL; } + pwrdm = omap_hwmod_get_pwrdm(oh); + pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); + pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata), NULL, 0, false); kfree(pdata); @@ -109,9 +136,6 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return PTR_ERR(pdev); } - omap_device_disable_idle_on_suspend(pdev); - - gpio_bank_count++; return 0; } diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 8ad210bda9a9..386dec8d2351 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -16,6 +16,7 @@ #include <asm/mach/flash.h> +#include <plat/cpu.h> #include <plat/nand.h> #include <plat/board.h> #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 5cdce10d6183..385b3e02c4a6 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -18,6 +18,7 @@ #include <asm/mach/flash.h> +#include <plat/cpu.h> #include <plat/onenand.h> #include <plat/board.h> #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index bbb870c04a5e..5e5880d6d099 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -101,10 +101,13 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; - ret = platform_device_register(&gpmc_smsc911x_regulator); - if (ret < 0) { - pr_err("Unable to register smsc911x regulators: %d\n", ret); - return; + if (!gpmc_cfg->id) { + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", + ret); + return; + } } if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index dfffbbf4c009..00d510858e28 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -888,6 +888,7 @@ int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) gpmc_write_reg(GPMC_ECC_CONFIG, val); return 0; } +EXPORT_SYMBOL_GPL(gpmc_enable_hwecc); /** * gpmc_calculate_ecc - generate non-inverted ecc bytes @@ -918,3 +919,4 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) gpmc_ecc_used = -EINVAL; return 0; } +EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 19dd1657245c..100db6217f39 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -293,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) +static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) { char *hc_name; @@ -316,6 +316,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, mmc->slots[0].pm_caps = c->pm_caps; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; + mmc->max_freq = c->max_freq; if (cpu_is_omap44xx()) mmc->reg_offset = OMAP4_MMC_REG_OFFSET; else @@ -429,66 +430,131 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, } static int omap_hsmmc_done; + +void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) +{ + struct platform_device *pdev; + struct omap_mmc_platform_data *mmc_pdata; + int res; + + if (omap_hsmmc_done != 1) + return; + + omap_hsmmc_done++; + + for (; c->mmc; c++) { + if (!c->deferred) + continue; + + pdev = c->pdev; + if (!pdev) + continue; + + mmc_pdata = pdev->dev.platform_data; + if (!mmc_pdata) + continue; + + mmc_pdata->slots[0].switch_pin = c->gpio_cd; + mmc_pdata->slots[0].gpio_wp = c->gpio_wp; + + res = omap_device_register(pdev); + if (res) + pr_err("Could not late init MMC %s\n", + c->name); + } +} + #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, + int ctrl_nr) { struct omap_hwmod *oh; + struct omap_hwmod *ohs[1]; + struct omap_device *od; struct platform_device *pdev; char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; struct omap_mmc_platform_data *mmc_data; struct omap_mmc_dev_attr *mmc_dev_attr; char *name; - int l; + int res; mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); if (!mmc_data) { pr_err("Cannot allocate memory for mmc device!\n"); - goto done; + return; } - if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) { - pr_err("%s fails!\n", __func__); - goto done; - } + res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data); + if (res < 0) + goto free_mmc; + omap_hsmmc_mux(mmc_data, (ctrl_nr - 1)); name = "omap_hsmmc"; - - l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, + res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, "mmc%d", ctrl_nr); - WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN, + WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN, "String buffer overflow in MMC%d device setup\n", ctrl_nr); + oh = omap_hwmod_lookup(oh_name); if (!oh) { pr_err("Could not look up %s\n", oh_name); - kfree(mmc_data->slots[0].name); - goto done; + goto free_name; } - + ohs[0] = oh; if (oh->dev_attr != NULL) { mmc_dev_attr = oh->dev_attr; mmc_data->controller_flags = mmc_dev_attr->flags; } - pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, - sizeof(struct omap_mmc_platform_data), NULL, 0, false); - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); - kfree(mmc_data->slots[0].name); - goto done; + pdev = platform_device_alloc(name, ctrl_nr - 1); + if (!pdev) { + pr_err("Could not allocate pdev for %s\n", name); + goto free_name; } - /* - * return device handle to board setup code - * required to populate for regulator framework structure - */ - hsmmcinfo->dev = &pdev->dev; + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + + od = omap_device_alloc(pdev, ohs, 1, NULL, 0); + if (!od) { + pr_err("Could not allocate od for %s\n", name); + goto put_pdev; + } + + res = platform_device_add_data(pdev, mmc_data, + sizeof(struct omap_mmc_platform_data)); + if (res) { + pr_err("Could not add pdata for %s\n", name); + goto put_pdev; + } + + hsmmcinfo->pdev = pdev; + + if (hsmmcinfo->deferred) + goto free_mmc; + + res = omap_device_register(pdev); + if (res) { + pr_err("Could not register od for %s\n", name); + goto free_od; + } + + goto free_mmc; + +free_od: + omap_device_delete(od); + +put_pdev: + platform_device_put(pdev); + +free_name: + kfree(mmc_data->slots[0].name); -done: +free_mmc: kfree(mmc_data); } -void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; @@ -521,7 +587,7 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) } for (; controllers->mmc; controllers++) - omap_init_hsmmc(controllers, controllers->mmc); + omap_hsmmc_init_one(controllers, controllers->mmc); } diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index c4409730c4bb..7f2e790e0929 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -21,11 +21,14 @@ struct omap2_hsmmc_info { bool no_off; /* power_saving and power is not to go off */ bool no_off_init; /* no power off when not in MMC sleep state */ bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */ + bool deferred; /* mmc needs a deferred probe */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ char *name; /* or NULL for default */ - struct device *dev; /* returned: pointer to mmc adapter */ + struct platform_device *pdev; /* mmc controller instance */ int ocr_mask; /* temporary HACK */ + int max_freq; /* maximum clock, if constrained by external + * circuitry, or 0 for default */ /* Remux (pad configuration) when powering on/off */ void (*remux)(struct device *dev, int slot, int power_on); /* init some special card */ @@ -34,11 +37,16 @@ struct omap2_hsmmc_info { #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -void omap2_hsmmc_init(struct omap2_hsmmc_info *); +void omap_hsmmc_init(struct omap2_hsmmc_info *); +void omap_hsmmc_late_init(struct omap2_hsmmc_info *); #else -static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info) +static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info) +{ +} + +static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info) { } diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 719ee423abe2..0e79b7bc6aa4 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -29,7 +29,7 @@ #include "control.h" static unsigned int omap_revision; - +static const char *cpu_rev; u32 omap_features; unsigned int omap_rev(void) @@ -44,6 +44,8 @@ int omap_type(void) if (cpu_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); + } else if (cpu_is_am33xx()) { + val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); } else if (cpu_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); } else if (cpu_is_omap44xx()) { @@ -112,7 +114,7 @@ void omap_get_die_id(struct omap_die_id *odi) odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3); } -static void __init omap24xx_check_revision(void) +void __init omap2xxx_check_revision(void) { int i, j; u32 idcode, prod_id; @@ -166,13 +168,63 @@ static void __init omap24xx_check_revision(void) pr_info("\n"); } +#define OMAP3_SHOW_FEATURE(feat) \ + if (omap3_has_ ##feat()) \ + printk(#feat" "); + +static void __init omap3_cpuinfo(void) +{ + const char *cpu_name; + + /* + * OMAP3430 and OMAP3530 are assumed to be same. + * + * OMAP3525, OMAP3515 and OMAP3503 can be detected only based + * on available features. Upon detection, update the CPU id + * and CPU class bits. + */ + if (cpu_is_omap3630()) { + cpu_name = "OMAP3630"; + } else if (cpu_is_omap3517()) { + /* AM35xx devices */ + cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; + } else if (cpu_is_ti816x()) { + cpu_name = "TI816X"; + } else if (cpu_is_am335x()) { + cpu_name = "AM335X"; + } else if (cpu_is_ti814x()) { + cpu_name = "TI814X"; + } else if (omap3_has_iva() && omap3_has_sgx()) { + /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ + cpu_name = "OMAP3430/3530"; + } else if (omap3_has_iva()) { + cpu_name = "OMAP3525"; + } else if (omap3_has_sgx()) { + cpu_name = "OMAP3515"; + } else { + cpu_name = "OMAP3503"; + } + + /* Print verbose information */ + pr_info("%s ES%s (", cpu_name, cpu_rev); + + OMAP3_SHOW_FEATURE(l2cache); + OMAP3_SHOW_FEATURE(iva); + OMAP3_SHOW_FEATURE(sgx); + OMAP3_SHOW_FEATURE(neon); + OMAP3_SHOW_FEATURE(isp); + OMAP3_SHOW_FEATURE(192mhz_clk); + + printk(")\n"); +} + #define OMAP3_CHECK_FEATURE(status,feat) \ if (((status & OMAP3_ ##feat## _MASK) \ >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \ omap_features |= OMAP3_HAS_ ##feat; \ } -static void __init omap3_check_features(void) +void __init omap3xxx_check_features(void) { u32 status; @@ -199,9 +251,11 @@ static void __init omap3_check_features(void) * TODO: Get additional info (where applicable) * e.g. Size of L2 cache. */ + + omap3_cpuinfo(); } -static void __init omap4_check_features(void) +void __init omap4xxx_check_features(void) { u32 si_type; @@ -226,12 +280,13 @@ static void __init omap4_check_features(void) } } -static void __init ti81xx_check_features(void) +void __init ti81xx_check_features(void) { omap_features = OMAP3_HAS_NEON; + omap3_cpuinfo(); } -static void __init omap3_check_revision(const char **cpu_rev) +void __init omap3xxx_check_revision(void) { u32 cpuid, idcode; u16 hawkeye; @@ -245,7 +300,7 @@ static void __init omap3_check_revision(const char **cpu_rev) cpuid = read_cpuid(CPUID_ID); if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) { omap_revision = OMAP3430_REV_ES1_0; - *cpu_rev = "1.0"; + cpu_rev = "1.0"; return; } @@ -266,26 +321,26 @@ static void __init omap3_check_revision(const char **cpu_rev) case 0: /* Take care of early samples */ case 1: omap_revision = OMAP3430_REV_ES2_0; - *cpu_rev = "2.0"; + cpu_rev = "2.0"; break; case 2: omap_revision = OMAP3430_REV_ES2_1; - *cpu_rev = "2.1"; + cpu_rev = "2.1"; break; case 3: omap_revision = OMAP3430_REV_ES3_0; - *cpu_rev = "3.0"; + cpu_rev = "3.0"; break; case 4: omap_revision = OMAP3430_REV_ES3_1; - *cpu_rev = "3.1"; + cpu_rev = "3.1"; break; case 7: /* FALLTHROUGH */ default: /* Use the latest known revision as default */ omap_revision = OMAP3430_REV_ES3_1_2; - *cpu_rev = "3.1.2"; + cpu_rev = "3.1.2"; } break; case 0xb868: @@ -298,13 +353,13 @@ static void __init omap3_check_revision(const char **cpu_rev) switch (rev) { case 0: omap_revision = OMAP3517_REV_ES1_0; - *cpu_rev = "1.0"; + cpu_rev = "1.0"; break; case 1: /* FALLTHROUGH */ default: omap_revision = OMAP3517_REV_ES1_1; - *cpu_rev = "1.1"; + cpu_rev = "1.1"; } break; case 0xb891: @@ -313,36 +368,36 @@ static void __init omap3_check_revision(const char **cpu_rev) switch(rev) { case 0: /* Take care of early samples */ omap_revision = OMAP3630_REV_ES1_0; - *cpu_rev = "1.0"; + cpu_rev = "1.0"; break; case 1: omap_revision = OMAP3630_REV_ES1_1; - *cpu_rev = "1.1"; + cpu_rev = "1.1"; break; case 2: /* FALLTHROUGH */ default: omap_revision = OMAP3630_REV_ES1_2; - *cpu_rev = "1.2"; + cpu_rev = "1.2"; } break; case 0xb81e: switch (rev) { case 0: omap_revision = TI8168_REV_ES1_0; - *cpu_rev = "1.0"; + cpu_rev = "1.0"; break; case 1: /* FALLTHROUGH */ default: omap_revision = TI8168_REV_ES1_1; - *cpu_rev = "1.1"; + cpu_rev = "1.1"; break; } break; case 0xb944: omap_revision = AM335X_REV_ES1_0; - *cpu_rev = "1.0"; + cpu_rev = "1.0"; break; case 0xb8f2: switch (rev) { @@ -350,29 +405,29 @@ static void __init omap3_check_revision(const char **cpu_rev) /* FALLTHROUGH */ case 1: omap_revision = TI8148_REV_ES1_0; - *cpu_rev = "1.0"; + cpu_rev = "1.0"; break; case 2: omap_revision = TI8148_REV_ES2_0; - *cpu_rev = "2.0"; + cpu_rev = "2.0"; break; case 3: /* FALLTHROUGH */ default: omap_revision = TI8148_REV_ES2_1; - *cpu_rev = "2.1"; + cpu_rev = "2.1"; break; } break; default: /* Unknown default to latest silicon rev as default */ omap_revision = OMAP3630_REV_ES1_2; - *cpu_rev = "1.2"; + cpu_rev = "1.2"; pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n"); } } -static void __init omap4_check_revision(void) +void __init omap4xxx_check_revision(void) { u32 idcode; u16 hawkeye; @@ -445,89 +500,6 @@ static void __init omap4_check_revision(void) ((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf)); } -#define OMAP3_SHOW_FEATURE(feat) \ - if (omap3_has_ ##feat()) \ - printk(#feat" "); - -static void __init omap3_cpuinfo(const char *cpu_rev) -{ - const char *cpu_name; - - /* - * OMAP3430 and OMAP3530 are assumed to be same. - * - * OMAP3525, OMAP3515 and OMAP3503 can be detected only based - * on available features. Upon detection, update the CPU id - * and CPU class bits. - */ - if (cpu_is_omap3630()) { - cpu_name = "OMAP3630"; - } else if (cpu_is_omap3517()) { - /* AM35xx devices */ - cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; - } else if (cpu_is_ti816x()) { - cpu_name = "TI816X"; - } else if (cpu_is_am335x()) { - cpu_name = "AM335X"; - } else if (cpu_is_ti814x()) { - cpu_name = "TI814X"; - } else if (omap3_has_iva() && omap3_has_sgx()) { - /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ - cpu_name = "OMAP3430/3530"; - } else if (omap3_has_iva()) { - cpu_name = "OMAP3525"; - } else if (omap3_has_sgx()) { - cpu_name = "OMAP3515"; - } else { - cpu_name = "OMAP3503"; - } - - /* Print verbose information */ - pr_info("%s ES%s (", cpu_name, cpu_rev); - - OMAP3_SHOW_FEATURE(l2cache); - OMAP3_SHOW_FEATURE(iva); - OMAP3_SHOW_FEATURE(sgx); - OMAP3_SHOW_FEATURE(neon); - OMAP3_SHOW_FEATURE(isp); - OMAP3_SHOW_FEATURE(192mhz_clk); - - printk(")\n"); -} - -/* - * Try to detect the exact revision of the omap we're running on - */ -void __init omap2_check_revision(void) -{ - const char *cpu_rev; - - /* - * At this point we have an idea about the processor revision set - * earlier with omap2_set_globals_tap(). - */ - if (cpu_is_omap24xx()) { - omap24xx_check_revision(); - } else if (cpu_is_omap34xx()) { - omap3_check_revision(&cpu_rev); - - /* TI81XX doesn't have feature register */ - if (!cpu_is_ti81xx()) - omap3_check_features(); - else - ti81xx_check_features(); - - omap3_cpuinfo(cpu_rev); - return; - } else if (cpu_is_omap44xx()) { - omap4_check_revision(); - omap4_check_features(); - return; - } else { - pr_err("OMAP revision unknown, please fix!\n"); - } -} - /* * Set up things for map_io and processor detection later on. Gets called * pretty much first thing from board init. For multi-omap, this gets diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S deleted file mode 100644 index 56964a0c4c7e..000000000000 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for OMAP-based platforms - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h index fd78f31aa1ad..b8758c8a9394 100644 --- a/arch/arm/mach-omap2/include/mach/io.h +++ b/arch/arm/mach-omap2/include/mach/io.h @@ -1,5 +1,49 @@ /* * arch/arm/mach-omap2/include/mach/io.h + * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup */ -#include <plat/io.h> +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h deleted file mode 100644 index d488721ab90b..000000000000 --- a/arch/arm/mach-omap2/include/mach/system.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/system.h - */ - -#include <plat/system.h> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index fb11b44fbdec..065bd768987c 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -21,36 +21,32 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/clk.h> -#include <linux/omapfb.h> #include <asm/tlb.h> - #include <asm/mach/map.h> #include <plat/sram.h> #include <plat/sdrc.h> #include <plat/serial.h> - -#include "clock2xxx.h" -#include "clock3xxx.h" -#include "clock44xx.h" - -#include "common.h" #include <plat/omap-pm.h> +#include <plat/omap_hwmod.h> +#include <plat/multi.h> + +#include "iomap.h" #include "voltage.h" #include "powerdomain.h" - #include "clockdomain.h" -#include <plat/omap_hwmod.h> -#include <plat/multi.h> #include "common.h" +#include "clock2xxx.h" +#include "clock3xxx.h" +#include "clock44xx.h" /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ -#ifdef CONFIG_ARCH_OMAP2 +#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) static struct map_desc omap24xx_io_desc[] __initdata = { { .virtual = L3_24XX_VIRT, @@ -352,7 +348,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) static void __init omap_common_init_early(void) { - omap2_check_revision(); omap_init_consistent_dma_size(); } @@ -393,6 +388,7 @@ static void __init omap_hwmod_init_postsetup(void) void __init omap2420_init_early(void) { omap2_set_globals_242x(); + omap2xxx_check_revision(); omap_common_init_early(); omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); @@ -407,6 +403,7 @@ void __init omap2420_init_early(void) void __init omap2430_init_early(void) { omap2_set_globals_243x(); + omap2xxx_check_revision(); omap_common_init_early(); omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); @@ -425,6 +422,8 @@ void __init omap2430_init_early(void) void __init omap3_init_early(void) { omap2_set_globals_3xxx(); + omap3xxx_check_revision(); + omap3xxx_check_features(); omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); @@ -457,6 +456,8 @@ void __init am35xx_init_early(void) void __init ti81xx_init_early(void) { omap2_set_globals_ti81xx(); + omap3xxx_check_revision(); + ti81xx_check_features(); omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); @@ -471,6 +472,8 @@ void __init ti81xx_init_early(void) void __init omap4430_init_early(void) { omap2_set_globals_443x(); + omap4xxx_check_revision(); + omap4xxx_check_features(); omap_common_init_early(); omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); @@ -491,43 +494,3 @@ void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, _omap2_init_reprogram_sdrc(); } } - -/* - * NOTE: Please use ioremap + __raw_read/write where possible instead of these - */ - -u8 omap_readb(u32 pa) -{ - return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_readb); - -u16 omap_readw(u32 pa) -{ - return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_readw); - -u32 omap_readl(u32 pa) -{ - return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_readl); - -void omap_writeb(u8 v, u32 pa) -{ - __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_writeb); - -void omap_writew(u16 v, u32 pa) -{ - __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_writew); - -void omap_writel(u32 v, u32 pa) -{ - __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); -} -EXPORT_SYMBOL(omap_writel); diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/mach-omap2/iomap.h index 0696bae1818b..e6f958165296 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/mach-omap2/iomap.h @@ -1,13 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/io.h - * - * IO definitions for TI OMAP processors and boards - * - * Copied from arch/arm/mach-sa1100/include/mach/io.h - * Copyright (C) 1997-1999 Russell King - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * IO mappings for OMAP2+ * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -25,33 +17,9 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include <mach/hardware.h> - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -/* - * ---------------------------------------------------------------------------- - * I/O mapping - * ---------------------------------------------------------------------------- */ #ifdef __ASSEMBLER__ @@ -60,13 +28,9 @@ #define IOMEM(x) ((void __force __iomem *)(x)) #endif -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - #define OMAP2_L3_IO_OFFSET 0x90000000 #define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ - #define OMAP2_L4_IO_OFFSET 0xb2000000 #define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ @@ -87,16 +51,6 @@ /* * ---------------------------------------------------------------------------- - * Omap1 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -#define OMAP1_IO_PHYS 0xFFFB0000 -#define OMAP1_IO_SIZE 0x40000 -#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET) - -/* - * ---------------------------------------------------------------------------- * Omap2 specific IO mapping * ---------------------------------------------------------------------------- */ @@ -247,31 +201,3 @@ /* 0x4e000000 --> 0xfd300000 */ #define OMAP44XX_DMM_SIZE SZ_1M #define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE) -/* - * ---------------------------------------------------------------------------- - * Omap specific register access - * ---------------------------------------------------------------------------- - */ - -#ifndef __ASSEMBLER__ - -/* - * NOTE: Please use ioremap + __raw_read/write where possible instead of these - */ - -extern u8 omap_readb(u32 pa); -extern u16 omap_readw(u32 pa); -extern u32 omap_readl(u32 pa); -extern void omap_writeb(u8 v, u32 pa); -extern void omap_writew(u16 v, u32 pa); -extern void omap_writel(u32 v, u32 pa); - -struct omap_sdrc_params; -extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); - -extern void __init omap_init_consistent_dma_size(void); - -#endif - -#endif diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 1fef061f7927..65f0d2571c9a 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -11,13 +11,20 @@ * for more details. */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <mach/hardware.h> + #include <asm/exception.h> #include <asm/mach/irq.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <mach/hardware.h> + +#include "iomap.h" /* selected INTC register offsets */ @@ -57,6 +64,8 @@ static struct omap_irq_bank { }, }; +static struct irq_domain *domain; + /* Structure to save interrupt controller context */ struct omap3_intc_regs { u32 sysconfig; @@ -147,17 +156,27 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) IRQ_NOREQUEST | IRQ_NOPROBE, 0); } -static void __init omap_init_irq(u32 base, int nr_irqs) +static void __init omap_init_irq(u32 base, int nr_irqs, + struct device_node *node) { void __iomem *omap_irq_base; unsigned long nr_of_irqs = 0; unsigned int nr_banks = 0; - int i, j; + int i, j, irq_base; omap_irq_base = ioremap(base, SZ_4K); if (WARN_ON(!omap_irq_base)) return; + irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); + if (irq_base < 0) { + pr_warn("Couldn't allocate IRQ numbers\n"); + irq_base = 0; + } + + domain = irq_domain_add_legacy(node, nr_irqs, irq_base, 0, + &irq_domain_simple_ops, NULL); + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { struct omap_irq_bank *bank = irq_banks + i; @@ -166,36 +185,36 @@ static void __init omap_init_irq(u32 base, int nr_irqs) /* Static mapping, never released */ bank->base_reg = ioremap(base, SZ_4K); if (!bank->base_reg) { - printk(KERN_ERR "Could not ioremap irq bank%i\n", i); + pr_err("Could not ioremap irq bank%i\n", i); continue; } omap_irq_bank_init_one(bank); for (j = 0; j < bank->nr_irqs; j += 32) - omap_alloc_gc(bank->base_reg + j, j, 32); + omap_alloc_gc(bank->base_reg + j, j + irq_base, 32); nr_of_irqs += bank->nr_irqs; nr_banks++; } - printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n", - nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); + pr_info("Total of %ld interrupts on %d active controller%s\n", + nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); } void __init omap2_init_irq(void) { - omap_init_irq(OMAP24XX_IC_BASE, 96); + omap_init_irq(OMAP24XX_IC_BASE, 96, NULL); } void __init omap3_init_irq(void) { - omap_init_irq(OMAP34XX_IC_BASE, 96); + omap_init_irq(OMAP34XX_IC_BASE, 96, NULL); } void __init ti81xx_init_irq(void) { - omap_init_irq(OMAP34XX_IC_BASE, 128); + omap_init_irq(OMAP34XX_IC_BASE, 128, NULL); } static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs) @@ -225,8 +244,10 @@ out: irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET); irqnr &= ACTIVEIRQ_MASK; - if (irqnr) + if (irqnr) { + irqnr = irq_find_mapping(domain, irqnr); handle_IRQ(irqnr, regs); + } } while (irqnr); } @@ -236,6 +257,28 @@ asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs omap_intc_handle_irq(base_addr, regs); } +int __init omap_intc_of_init(struct device_node *node, + struct device_node *parent) +{ + struct resource res; + u32 nr_irqs = 96; + + if (WARN_ON(!node)) + return -ENODEV; + + if (of_address_to_resource(node, 0, &res)) { + WARN(1, "unable to get intc registers\n"); + return -EINVAL; + } + + if (of_property_read_u32(node, "ti,intc-size", &nr_irqs)) + pr_warn("unable to get intc-size, default to %d\n", nr_irqs); + + omap_init_irq(res.start, nr_irqs, of_node_get(node)); + + return 0; +} + #ifdef CONFIG_ARCH_OMAP3 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index fb4bcf81a183..577cb77db26c 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -34,7 +34,7 @@ #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" -/* McBSP internal signal muxing function */ +/* McBSP1 internal signal muxing function for OMAP2/3 */ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, const char *src) { @@ -65,6 +65,42 @@ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, return 0; } +/* McBSP4 internal signal muxing function for OMAP4 */ +#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31) +#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30) +static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal, + const char *src) +{ + u32 v; + + /* + * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR + * mux) is used */ + v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); + + if (!strcmp(signal, "clkr")) { + if (!strcmp(src, "clkr")) + v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; + else if (!strcmp(src, "clkx")) + v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; + else + return -EINVAL; + } else if (!strcmp(signal, "fsr")) { + if (!strcmp(src, "fsr")) + v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; + else if (!strcmp(src, "fsx")) + v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; + else + return -EINVAL; + } else { + return -EINVAL; + } + + omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); + + return 0; +} + /* McBSP CLKS source switching function */ static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk, const char *src) @@ -122,7 +158,7 @@ static int omap3_enable_st_clock(unsigned int id, bool enable) return 0; } -static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) +static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) { int id, count = 1; char *name = "omap-mcbsp"; @@ -146,9 +182,15 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->has_ccr = true; } pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) + + /* On OMAP2/3 the McBSP1 port has 6 pin configuration */ + if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4) pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; + /* On OMAP4 the McBSP4 port has 6 pin configuration */ + if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4) + pdata->mux_signal = omap4_mcbsp4_mux_rx_clk; + if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) /* The FIFO has 1024 + 256 locations */ @@ -180,7 +222,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - omap_mcbsp_count++; return 0; } @@ -188,11 +229,6 @@ static int __init omap2_mcbsp_init(void) { omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); - mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), - GFP_KERNEL); - if (!mcbsp_ptr) - return -ENOMEM; - - return omap_mcbsp_init(); + return 0; } arch_initcall(omap2_mcbsp_init); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 611a0e3d54ca..65c33911341f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -35,7 +35,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/system.h> #include <plat/omap_hwmod.h> @@ -100,8 +99,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition, static char *omap_mux_options; -static int _omap_mux_init_gpio(struct omap_mux_partition *partition, - int gpio, int val) +static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, + int gpio, int val) { struct omap_mux_entry *e; struct omap_mux *gpio_mux = NULL; @@ -145,7 +144,7 @@ static int _omap_mux_init_gpio(struct omap_mux_partition *partition, return 0; } -int omap_mux_init_gpio(int gpio, int val) +int __init omap_mux_init_gpio(int gpio, int val) { struct omap_mux_partition *partition; int ret; @@ -159,9 +158,9 @@ int omap_mux_init_gpio(int gpio, int val) return -ENODEV; } -static int _omap_mux_get_by_name(struct omap_mux_partition *partition, - const char *muxname, - struct omap_mux **found_mux) +static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, + const char *muxname, + struct omap_mux **found_mux) { struct omap_mux *mux = NULL; struct omap_mux_entry *e; @@ -218,7 +217,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int +static int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) @@ -240,7 +239,7 @@ omap_mux_get_by_name(const char *muxname, return -ENODEV; } -int omap_mux_init_signal(const char *muxname, int val) +int __init omap_mux_init_signal(const char *muxname, int val) { struct omap_mux_partition *partition = NULL; struct omap_mux *mux = NULL; diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 2132308ad1e4..69fe060a0b75 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -246,7 +246,7 @@ static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state) { } -static struct omap_board_mux *board_mux __initdata __maybe_unused; +static struct omap_board_mux *board_mux __maybe_unused; #endif diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index adbe4d8c7caf..56c345b8b931 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -33,7 +33,7 @@ int platform_cpu_kill(unsigned int cpu) * platform-specific code to shutdown a CPU * Called with IRQs disabled */ -void platform_cpu_die(unsigned int cpu) +void __ref platform_cpu_die(unsigned int cpu) { unsigned int this_cpu; diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 1d5d01056558..13670aa84e58 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -46,7 +46,6 @@ #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/smp_scu.h> -#include <asm/system.h> #include <asm/pgalloc.h> #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> @@ -263,12 +262,10 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * In MPUSS OSWR or device OFF, interrupt controller contest is lost. */ mpuss_clear_prev_logic_pwrst(); - pwrdm_clear_all_prev_pwrst(mpuss_pd); if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) && (pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF)) save_state = 2; - clear_cpu_prev_pwrst(cpu); cpu_clear_prev_logic_pwrst(cpu); set_cpu_next_pwrst(cpu, power_state); set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume)); @@ -300,7 +297,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * @cpu : CPU ID * @power_state: CPU low power state. */ -int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) +int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { unsigned int cpu_state = 0; diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index c1bf3ef0ba02..deffbf1c9627 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -23,11 +23,12 @@ #include <asm/cacheflush.h> #include <asm/hardware/gic.h> #include <asm/smp_scu.h> + #include <mach/hardware.h> #include <mach/omap-secure.h> +#include "iomap.h" #include "common.h" - #include "clockdomain.h" /* SCU base address */ diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index d3d8971d7f30..42cd7fb52414 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -43,7 +43,6 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; -static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks); static DEFINE_SPINLOCK(wakeupgen_lock); static unsigned int irq_target_cpu[NR_IRQS]; @@ -67,14 +66,6 @@ static inline void sar_writel(u32 val, u32 offset, u8 idx) __raw_writel(val, sar_base + offset + (idx * 4)); } -static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg) -{ - u8 i; - - for (i = 0; i < NR_REG_BANKS; i++) - wakeupgen_writel(reg, i, cpu); -} - static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index) { unsigned int spi_irq; @@ -130,22 +121,6 @@ static void _wakeupgen_set(unsigned int irq, unsigned int cpu) wakeupgen_writel(val, i, cpu); } -static void _wakeupgen_save_masks(unsigned int cpu) -{ - u8 i; - - for (i = 0; i < NR_REG_BANKS; i++) - per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu); -} - -static void _wakeupgen_restore_masks(unsigned int cpu) -{ - u8 i; - - for (i = 0; i < NR_REG_BANKS; i++) - wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu); -} - /* * Architecture specific Mask extension */ @@ -170,6 +145,33 @@ static void wakeupgen_unmask(struct irq_data *d) spin_unlock_irqrestore(&wakeupgen_lock, flags); } +#ifdef CONFIG_HOTPLUG_CPU +static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks); + +static void _wakeupgen_save_masks(unsigned int cpu) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu); +} + +static void _wakeupgen_restore_masks(unsigned int cpu) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu); +} + +static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + wakeupgen_writel(reg, i, cpu); +} + /* * Mask or unmask all interrupts on given CPU. * 0 = Mask all interrupts on the 'cpu' @@ -191,6 +193,7 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) } spin_unlock_irqrestore(&wakeupgen_lock, flags); } +#endif #ifdef CONFIG_CPU_PM /* diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 3c8dd928628e..34b9766d1d23 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -29,6 +29,7 @@ #include "omap_hwmod_common_data.h" +#include "smartreflex.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" #include "wd_timer.h" @@ -376,6 +377,16 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { + { .irq = 18}, + { .irq = -1 } +}; + +static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { + { .irq = 19}, + { .irq = -1 } +}; + /* L4 CORE -> SR1 interface */ static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = { { @@ -2664,6 +2675,10 @@ static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = { }; /* SR1 */ +static struct omap_smartreflex_dev_attr sr1_dev_attr = { + .sensor_voltdm_name = "mpu_iva", +}; + static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = { &omap3_l4_core__sr1, }; @@ -2672,7 +2687,6 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { .name = "sr1_hwmod", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", - .vdd_name = "mpu_iva", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -2684,6 +2698,8 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { }, .slaves = omap3_sr1_slaves, .slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves), + .dev_attr = &sr1_dev_attr, + .mpu_irqs = omap3_smartreflex_mpu_irqs, .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; @@ -2691,7 +2707,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = { .name = "sr1_hwmod", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", - .vdd_name = "mpu_iva", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -2703,9 +2718,15 @@ static struct omap_hwmod omap36xx_sr1_hwmod = { }, .slaves = omap3_sr1_slaves, .slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves), + .dev_attr = &sr1_dev_attr, + .mpu_irqs = omap3_smartreflex_mpu_irqs, }; /* SR2 */ +static struct omap_smartreflex_dev_attr sr2_dev_attr = { + .sensor_voltdm_name = "core", +}; + static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = { &omap3_l4_core__sr2, }; @@ -2714,7 +2735,6 @@ static struct omap_hwmod omap34xx_sr2_hwmod = { .name = "sr2_hwmod", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", - .vdd_name = "core", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -2726,6 +2746,8 @@ static struct omap_hwmod omap34xx_sr2_hwmod = { }, .slaves = omap3_sr2_slaves, .slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves), + .dev_attr = &sr2_dev_attr, + .mpu_irqs = omap3_smartreflex_core_irqs, .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; @@ -2733,7 +2755,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = { .name = "sr2_hwmod", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", - .vdd_name = "core", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -2745,6 +2766,8 @@ static struct omap_hwmod omap36xx_sr2_hwmod = { }, .slaves = omap3_sr2_slaves, .slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves), + .dev_attr = &sr2_dev_attr, + .mpu_irqs = omap3_smartreflex_core_irqs, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index ef0524c10a84..08daa5e0eb5f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -28,12 +28,12 @@ #include <plat/mcspi.h> #include <plat/mcbsp.h> #include <plat/mmc.h> -#include <plat/i2c.h> #include <plat/dmtimer.h> #include <plat/common.h> #include "omap_hwmod_common_data.h" +#include "smartreflex.h" #include "cm1_44xx.h" #include "cm2_44xx.h" #include "prm44xx.h" @@ -3963,6 +3963,10 @@ static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = { }; /* smartreflex_core */ +static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = { + .sensor_voltdm_name = "core", +}; + static struct omap_hwmod omap44xx_smartreflex_core_hwmod; static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = { { .irq = 19 + OMAP44XX_IRQ_GIC_START }, @@ -3999,7 +4003,6 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = { .mpu_irqs = omap44xx_smartreflex_core_irqs, .main_clk = "smartreflex_core_fck", - .vdd_name = "core", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET, @@ -4009,9 +4012,14 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = { }, .slaves = omap44xx_smartreflex_core_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves), + .dev_attr = &smartreflex_core_dev_attr, }; /* smartreflex_iva */ +static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = { + .sensor_voltdm_name = "iva", +}; + static struct omap_hwmod omap44xx_smartreflex_iva_hwmod; static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = { { .irq = 102 + OMAP44XX_IRQ_GIC_START }, @@ -4047,7 +4055,6 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = { .clkdm_name = "l4_ao_clkdm", .mpu_irqs = omap44xx_smartreflex_iva_irqs, .main_clk = "smartreflex_iva_fck", - .vdd_name = "iva", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET, @@ -4057,9 +4064,14 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = { }, .slaves = omap44xx_smartreflex_iva_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves), + .dev_attr = &smartreflex_iva_dev_attr, }; /* smartreflex_mpu */ +static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = { + .sensor_voltdm_name = "mpu", +}; + static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod; static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = { { .irq = 18 + OMAP44XX_IRQ_GIC_START }, @@ -4095,7 +4107,6 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = { .clkdm_name = "l4_ao_clkdm", .mpu_irqs = omap44xx_smartreflex_mpu_irqs, .main_clk = "smartreflex_mpu_fck", - .vdd_name = "mpu", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET, @@ -4105,6 +4116,7 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = { }, .slaves = omap44xx_smartreflex_mpu_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves), + .dev_attr = &smartreflex_mpu_dev_attr, }; /* diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c index e6dda694fd5c..5037e76e4e23 100644 --- a/arch/arm/mach-omap2/opp2420_data.c +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -28,6 +28,8 @@ * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/ */ +#include <plat/hardware.h> + #include "opp2xxx.h" #include "sdrc.h" #include "clock.h" diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index 1b9596ae201e..750805c528d8 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -26,6 +26,8 @@ * This is technically part of the OMAP2xxx clock code. */ +#include <plat/hardware.h> + #include "opp2xxx.h" #include "sdrc.h" #include "clock.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 4411163e012d..814bcd901596 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -220,8 +220,8 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir) return 0; d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir); - - (void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d, + if (!(IS_ERR_OR_NULL(d))) + (void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d, (void *)pwrdm, &pwrdm_suspend_fops); return 0; @@ -264,7 +264,7 @@ static int __init pm_dbg_init(void) return 0; d = debugfs_create_dir("pm_debug", NULL); - if (IS_ERR(d)) + if (IS_ERR_OR_NULL(d)) return PTR_ERR(d); (void) debugfs_create_file("count", S_IRUGO, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 5a65dd04aa38..a7bdec69a2b3 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -15,11 +15,13 @@ #include <linux/err.h> #include <linux/opp.h> #include <linux/export.h> +#include <linux/suspend.h> #include <plat/omap-pm.h> #include <plat/omap_device.h> #include "common.h" +#include "prcm-common.h" #include "voltage.h" #include "powerdomain.h" #include "clockdomain.h" @@ -28,7 +30,13 @@ static struct omap_device_pm_latency *pm_lats; -static int _init_omap_device(char *name) +/* + * omap_pm_suspend: points to a function that does the SoC-specific + * suspend work + */ +int (*omap_pm_suspend)(void); + +static int __init _init_omap_device(char *name) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -49,7 +57,7 @@ static int _init_omap_device(char *name) /* * Build omap_devices for processors and bus. */ -static void omap2_init_processor_devices(void) +static void __init omap2_init_processor_devices(void) { _init_omap_device("mpu"); if (omap3_has_iva()) @@ -68,32 +76,41 @@ static void omap2_init_processor_devices(void) #define FORCEWAKEUP_SWITCH 0 #define LOWPOWERSTATE_SWITCH 1 +int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) +{ + if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) + clkdm_allow_idle(clkdm); + else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && + atomic_read(&clkdm->usecount) == 0) + clkdm_sleep(clkdm); + return 0; +} + /* * This sets pwrdm state (other than mpu & core. Currently only ON & * RET are supported. */ -int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst) { - u32 cur_state; - int sleep_switch = -1; - int ret = 0; - int hwsup = 0; + u8 curr_pwrst, next_pwrst; + int sleep_switch = -1, ret = 0, hwsup = 0; - if (pwrdm == NULL || IS_ERR(pwrdm)) + if (!pwrdm || IS_ERR(pwrdm)) return -EINVAL; - while (!(pwrdm->pwrsts & (1 << state))) { - if (state == PWRDM_POWER_OFF) + while (!(pwrdm->pwrsts & (1 << pwrst))) { + if (pwrst == PWRDM_POWER_OFF) return ret; - state--; + pwrst--; } - cur_state = pwrdm_read_next_pwrst(pwrdm); - if (cur_state == state) + next_pwrst = pwrdm_read_next_pwrst(pwrdm); + if (next_pwrst == pwrst) return ret; - if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { - if ((pwrdm_read_pwrst(pwrdm) > state) && + curr_pwrst = pwrdm_read_pwrst(pwrdm); + if (curr_pwrst < PWRDM_POWER_ON) { + if ((curr_pwrst > pwrst) && (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) { sleep_switch = LOWPOWERSTATE_SWITCH; } else { @@ -103,12 +120,10 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) } } - ret = pwrdm_set_next_pwrst(pwrdm, state); - if (ret) { - pr_err("%s: unable to set state of powerdomain: %s\n", + ret = pwrdm_set_next_pwrst(pwrdm, pwrst); + if (ret) + pr_err("%s: unable to set power state of powerdomain: %s\n", __func__, pwrdm->name); - goto err; - } switch (sleep_switch) { case FORCEWAKEUP_SWITCH: @@ -119,16 +134,16 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) break; case LOWPOWERSTATE_SWITCH: pwrdm_set_lowpwrstchange(pwrdm); + pwrdm_wait_transition(pwrdm); + pwrdm_state_switch(pwrdm); break; - default: - return ret; } - pwrdm_state_switch(pwrdm); -err: return ret; } + + /* * This API is to be called during init to set the various voltage * domains to the voltage as per the opp table. Typically we boot up @@ -199,6 +214,56 @@ exit: return -EINVAL; } +#ifdef CONFIG_SUSPEND +static int omap_pm_enter(suspend_state_t suspend_state) +{ + int ret = 0; + + if (!omap_pm_suspend) + return -ENOENT; /* XXX doublecheck */ + + switch (suspend_state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int omap_pm_begin(suspend_state_t state) +{ + disable_hlt(); + if (cpu_is_omap34xx()) + omap_prcm_irq_prepare(); + return 0; +} + +static void omap_pm_end(void) +{ + enable_hlt(); + return; +} + +static void omap_pm_finish(void) +{ + if (cpu_is_omap34xx()) + omap_prcm_irq_complete(); +} + +static const struct platform_suspend_ops omap_pm_ops = { + .begin = omap_pm_begin, + .end = omap_pm_end, + .enter = omap_pm_enter, + .finish = omap_pm_finish, + .valid = suspend_valid_only_mem, +}; + +#endif /* CONFIG_SUSPEND */ + static void __init omap3_init_voltages(void) { if (!cpu_is_omap34xx()) @@ -230,6 +295,14 @@ postcore_initcall(omap2_common_pm_init); static int __init omap2_common_pm_late_init(void) { + /* + * In the case of DT, the PMIC and SR initialization will be done using + * a completely different mechanism. + * Disable this part if a DT blob is available. + */ + if (of_have_populated_dt()) + return 0; + /* Init the voltage layer */ omap_pmic_late_init(); omap_voltage_late_init(); @@ -241,6 +314,10 @@ static int __init omap2_common_pm_late_init(void) /* Smartreflex device init */ omap_devinit_smartreflex(); +#ifdef CONFIG_SUSPEND + suspend_set_ops(&omap_pm_ops); +#endif + return 0; } late_initcall(omap2_common_pm_late_init); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index b737b11e4499..36fa90b6ece8 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -18,10 +18,11 @@ extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); -extern int omap3_can_sleep(void); extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); extern int omap3_idle_init(void); extern int omap4_idle_init(void); +extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); +extern int (*omap_pm_suspend)(void); #if defined(CONFIG_PM_OPP) extern int omap3_opp_init(void); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 23de98d03841..95442b69ae27 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -26,7 +26,6 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/clk.h> -#include <linux/io.h> #include <linux/irq.h> #include <linux/time.h> #include <linux/gpio.h> @@ -34,13 +33,15 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> +#include <asm/system_misc.h> -#include <mach/irqs.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/dma.h> #include <plat/board.h> +#include <mach/irqs.h> + #include "common.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" @@ -49,23 +50,9 @@ #include "sdrc.h" #include "pm.h" #include "control.h" - #include "powerdomain.h" #include "clockdomain.h" -#ifdef CONFIG_SUSPEND -static suspend_state_t suspend_state = PM_SUSPEND_ON; -static inline bool is_suspending(void) -{ - return (suspend_state != PM_SUSPEND_ON); -} -#else -static inline bool is_suspending(void) -{ - return false; -} -#endif - static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); @@ -85,7 +72,7 @@ static int omap2_fclks_active(void) return (f1 | f2) ? 1 : 0; } -static void omap2_enter_full_retention(void) +static int omap2_enter_full_retention(void) { u32 l; @@ -148,6 +135,8 @@ no_sleep: /* Mask future PRCM-to-MPU interrupts */ omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + + return 0; } static int omap2_i2c_active(void) @@ -226,7 +215,6 @@ static int omap2_can_sleep(void) static void omap2_pm_idle(void) { - local_irq_disable(); local_fiq_disable(); if (!omap2_can_sleep()) { @@ -243,78 +231,6 @@ static void omap2_pm_idle(void) out: local_fiq_enable(); - local_irq_enable(); -} - -#ifdef CONFIG_SUSPEND -static int omap2_pm_begin(suspend_state_t state) -{ - disable_hlt(); - suspend_state = state; - return 0; -} - -static int omap2_pm_suspend(void) -{ - u32 wken_wkup, mir1; - - wken_wkup = omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); - wken_wkup &= ~OMAP24XX_EN_GPT1_MASK; - omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN); - - /* Mask GPT1 */ - mir1 = omap_readl(0x480fe0a4); - omap_writel(1 << 5, 0x480fe0ac); - - omap2_enter_full_retention(); - - omap_writel(mir1, 0x480fe0a4); - omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN); - - return 0; -} - -static int omap2_pm_enter(suspend_state_t state) -{ - int ret = 0; - - switch (state) { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap2_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static void omap2_pm_end(void) -{ - suspend_state = PM_SUSPEND_ON; - enable_hlt(); -} - -static const struct platform_suspend_ops omap_pm_ops = { - .begin = omap2_pm_begin, - .enter = omap2_pm_enter, - .end = omap2_pm_end, - .valid = suspend_valid_only_mem, -}; -#else -static const struct platform_suspend_ops __initdata omap_pm_ops; -#endif /* CONFIG_SUSPEND */ - -/* XXX This function should be shareable between OMAP2xxx and OMAP3 */ -static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) -{ - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) - clkdm_allow_idle(clkdm); - else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && - atomic_read(&clkdm->usecount) == 0) - clkdm_sleep(clkdm); - return 0; } static void __init prcm_setup_regs(void) @@ -358,9 +274,13 @@ static void __init prcm_setup_regs(void) clkdm_sleep(gfx_clkdm); /* Enable hardware-supervised idle for all clkdms */ - clkdm_for_each(clkdms_setup, NULL); + clkdm_for_each(omap_pm_clkdms_setup, NULL); clkdm_add_wkdep(mpu_clkdm, wkup_clkdm); +#ifdef CONFIG_SUSPEND + omap_pm_suspend = omap2_enter_full_retention; +#endif + /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk * stabilisation */ omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, @@ -461,8 +381,7 @@ static int __init omap2_pm_init(void) omap24xx_cpu_suspend_sz); } - suspend_set_ops(&omap_pm_ops); - pm_idle = omap2_pm_idle; + arm_pm_idle = omap2_pm_idle; return 0; } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index fc6987578920..238defc6f6df 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -31,6 +31,7 @@ #include <trace/events/power.h> #include <asm/suspend.h> +#include <asm/system_misc.h> #include <plat/sram.h> #include "clockdomain.h" @@ -50,10 +51,6 @@ #include "sdrc.h" #include "control.h" -#ifdef CONFIG_SUSPEND -static suspend_state_t suspend_state = PM_SUSPEND_ON; -#endif - /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -75,16 +72,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; static struct powerdomain *cam_pwrdm; -static inline void omap3_per_save_context(void) -{ - omap_gpio_save_context(); -} - -static inline void omap3_per_restore_context(void) -{ - omap_gpio_restore_context(); -} - static void omap3_enable_io_chain(void) { int timeout = 0; @@ -290,11 +277,6 @@ void omap_sram_idle(void) int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; - pwrdm_clear_all_prev_pwrst(mpu_pwrdm); - pwrdm_clear_all_prev_pwrst(neon_pwrdm); - pwrdm_clear_all_prev_pwrst(core_pwrdm); - pwrdm_clear_all_prev_pwrst(per_pwrdm); - mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); switch (mpu_next_state) { case PWRDM_POWER_ON: @@ -332,8 +314,6 @@ void omap_sram_idle(void) if (per_next_state < PWRDM_POWER_ON) { per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); - if (per_next_state == PWRDM_POWER_OFF) - omap3_per_save_context(); } /* CORE */ @@ -399,8 +379,6 @@ void omap_sram_idle(void) if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); omap2_gpio_resume_after_idle(); - if (per_prev_state == PWRDM_POWER_OFF) - omap3_per_restore_context(); } /* Disable IO-PAD and IO-CHAIN wakeup */ @@ -418,10 +396,9 @@ void omap_sram_idle(void) static void omap3_pm_idle(void) { - local_irq_disable(); local_fiq_disable(); - if (omap_irq_pending() || need_resched()) + if (omap_irq_pending()) goto out; trace_power_start(POWER_CSTATE, 1, smp_processor_id()); @@ -434,7 +411,6 @@ static void omap3_pm_idle(void) out: local_fiq_enable(); - local_irq_enable(); } #ifdef CONFIG_SUSPEND @@ -479,50 +455,6 @@ restore: return ret; } -static int omap3_pm_enter(suspend_state_t unused) -{ - int ret = 0; - - switch (suspend_state) { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap3_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -/* Hooks to enable / disable UART interrupts during suspend */ -static int omap3_pm_begin(suspend_state_t state) -{ - disable_hlt(); - suspend_state = state; - omap_prcm_irq_prepare(); - return 0; -} - -static void omap3_pm_end(void) -{ - suspend_state = PM_SUSPEND_ON; - enable_hlt(); - return; -} - -static void omap3_pm_finish(void) -{ - omap_prcm_irq_complete(); -} - -static const struct platform_suspend_ops omap_pm_ops = { - .begin = omap3_pm_begin, - .end = omap3_pm_end, - .enter = omap3_pm_enter, - .finish = omap3_pm_finish, - .valid = suspend_valid_only_mem, -}; #endif /* CONFIG_SUSPEND */ @@ -743,21 +675,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) } /* - * Enable hw supervised mode for all clockdomains if it's - * supported. Initiate sleep transition for other clockdomains, if - * they are not used - */ -static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) -{ - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) - clkdm_allow_idle(clkdm); - else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && - atomic_read(&clkdm->usecount) == 0) - clkdm_sleep(clkdm); - return 0; -} - -/* * Push functions to SRAM * * The minimum set of functions is pushed to SRAM for execution: @@ -826,7 +743,7 @@ static int __init omap3_pm_init(void) goto err2; } - (void) clkdm_for_each(clkdms_setup, NULL); + (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); if (mpu_pwrdm == NULL) { @@ -845,10 +762,10 @@ static int __init omap3_pm_init(void) core_clkdm = clkdm_lookup("core_clkdm"); #ifdef CONFIG_SUSPEND - suspend_set_ops(&omap_pm_ops); -#endif /* CONFIG_SUSPEND */ + omap_pm_suspend = omap3_pm_suspend; +#endif - pm_idle = omap3_pm_idle; + arm_pm_idle = omap3_pm_idle; omap3_idle_init(); /* diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index c264ef7219c1..9ccaadc2cf07 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/err.h> #include <linux/slab.h> +#include <asm/system_misc.h> #include "common.h" #include "clockdomain.h" @@ -83,59 +84,8 @@ static int omap4_pm_suspend(void) return 0; } - -static int omap4_pm_enter(suspend_state_t suspend_state) -{ - int ret = 0; - - switch (suspend_state) { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap4_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static int omap4_pm_begin(suspend_state_t state) -{ - disable_hlt(); - return 0; -} - -static void omap4_pm_end(void) -{ - enable_hlt(); - return; -} - -static const struct platform_suspend_ops omap_pm_ops = { - .begin = omap4_pm_begin, - .end = omap4_pm_end, - .enter = omap4_pm_enter, - .valid = suspend_valid_only_mem, -}; #endif /* CONFIG_SUSPEND */ -/* - * Enable hardware supervised mode for all clockdomains if it's - * supported. Initiate sleep transition for other clockdomains, if - * they are not used - */ -static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) -{ - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) - clkdm_allow_idle(clkdm); - else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && - atomic_read(&clkdm->usecount) == 0) - clkdm_sleep(clkdm); - return 0; -} - - static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) { struct power_state *pwrst; @@ -173,18 +123,16 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) * omap_default_idle - OMAP4 default ilde routine.' * * Implements OMAP4 memory, IO ordering requirements which can't be addressed - * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and + * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and * by secondary CPU with CONFIG_CPUIDLE. */ static void omap_default_idle(void) { - local_irq_disable(); local_fiq_disable(); omap_do_wfi(); local_fiq_enable(); - local_irq_enable(); } /** @@ -249,14 +197,14 @@ static int __init omap4_pm_init(void) goto err2; } - (void) clkdm_for_each(clkdms_setup, NULL); + (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); #ifdef CONFIG_SUSPEND - suspend_set_ops(&omap_pm_ops); -#endif /* CONFIG_SUSPEND */ + omap_pm_suspend = omap4_pm_suspend; +#endif - /* Overwrite the default arch_idle() */ - pm_idle = omap_default_idle; + /* Overwrite the default cpu_do_idle() */ + arm_pm_idle = omap_default_idle; omap4_idle_init(); diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c index f97afff68d6d..c0aeabfcf009 100644 --- a/arch/arm/mach-omap2/powerdomain-common.c +++ b/arch/arm/mach-omap2/powerdomain-common.c @@ -13,6 +13,7 @@ #include <linux/errno.h> #include <linux/kernel.h> +#include <linux/bug.h> #include "pm.h" #include "cm.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index 6a17e4ca1d79..0f0a9f1592fe 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/bug.h> #include <plat/prcm.h> diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c index a7880af4b3d9..601325b852a4 100644 --- a/arch/arm/mach-omap2/powerdomain44xx.c +++ b/arch/arm/mach-omap2/powerdomain44xx.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/bug.h> #include "powerdomain.h" #include <plat/prcm.h> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 8ef26daeed68..b7ea468eea32 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/bug.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index ca669b50f390..928dbd4f20ed 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -15,8 +15,8 @@ #include <linux/err.h> #include <linux/io.h> +#include "iomap.h" #include "common.h" - #include "prcm_mpu44xx.h" #include "cm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a1d6154dc120..eac623c7c3d8 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -17,11 +17,12 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" #include <plat/cpu.h> #include <plat/irqs.h> #include <plat/prcm.h> +#include "iomap.h" +#include "common.h" #include "vp.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 860118ab43e2..873b51d494ea 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,7 +24,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include <mach/system.h> #include <plat/common.h> #include <plat/prcm.h> #include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index f6de5bc6b12a..9b3898a3ac9b 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -16,8 +16,8 @@ #include <linux/err.h> #include <linux/io.h> +#include "iomap.h" #include "common.h" - #include "prm44xx.h" #include "prminst44xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c index 7479d7ea1379..845c4fd2b125 100644 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ b/arch/arm/mach-omap2/sdram-nokia.c @@ -17,7 +17,6 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/io.h> #include "common.h" #include <plat/clock.h> #include <plat/sdrc.h> diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 791a63cdceb2..1133bb2f632b 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,13 +24,15 @@ #include <linux/clk.h> #include <linux/io.h> -#include "common.h" +#include <plat/hardware.h> #include <plat/clock.h> #include <plat/sram.h> +#include <plat/sdrc.h> +#include "iomap.h" +#include "common.h" #include "prm2xxx_3xxx.h" #include "clock.h" -#include <plat/sdrc.h> #include "sdrc.h" /* Memory timing, DLL mode flags */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index f590afc1f673..0cdd359a128e 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -54,11 +54,9 @@ struct omap_uart_state { int num; - int can_sleep; struct list_head node; struct omap_hwmod *oh; - struct platform_device *pdev; }; static LIST_HEAD(uart_list); @@ -381,8 +379,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); - uart->pdev = pdev; - oh->dev_attr = uart; if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index b5071a47ec39..d4bf904d84ab 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -27,7 +27,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/io.h> #include <plat/omap24xx.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index f2ea1bd1c691..1f62f23673fb 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -23,10 +23,13 @@ * MA 02111-1307 USA */ #include <linux/linkage.h> + #include <asm/assembler.h> + +#include <plat/hardware.h> #include <plat/sram.h> -#include <mach/io.h> +#include "iomap.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index abd283400490..9f6b83d1b193 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -10,7 +10,6 @@ */ #include <linux/linkage.h> -#include <asm/system.h> #include <asm/smp_scu.h> #include <asm/memory.h> #include <asm/hardware/cache-l2x0.h> diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index 53d9d0a5b39d..955566eefac4 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -29,6 +29,7 @@ static int sr_class3_enable(struct voltagedomain *voltdm) static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset) { + sr_disable_errgen(voltdm); omap_vp_disable(voltdm); sr_disable(voltdm); if (is_volt_reset) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 7e755bb0ffc4..008fbd7b9352 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -36,6 +36,12 @@ #define SR_DISABLE_TIMEOUT 200 struct omap_sr { + struct list_head node; + struct platform_device *pdev; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; + struct dentry *dbg_dir; + unsigned int irq; int srid; int ip_type; int nvalue_count; @@ -49,13 +55,7 @@ struct omap_sr { u32 senp_avgweight; u32 senp_mod; u32 senn_mod; - unsigned int irq; void __iomem *base; - struct platform_device *pdev; - struct list_head node; - struct omap_sr_nvalue_table *nvalue_table; - struct voltagedomain *voltdm; - struct dentry *dbg_dir; }; /* sr_list contains all the instances of smartreflex module */ @@ -74,10 +74,6 @@ static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask, u32 value) { u32 reg_val; - u32 errconfig_offs = 0, errconfig_mask = 0; - - reg_val = __raw_readl(sr->base + offset); - reg_val &= ~mask; /* * Smartreflex error config register is special as it contains @@ -88,16 +84,15 @@ static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask, * if they are currently set, but does allow the caller to write * those bits. */ - if (sr->ip_type == SR_TYPE_V1) { - errconfig_offs = ERRCONFIG_V1; - errconfig_mask = ERRCONFIG_STATUS_V1_MASK; - } else if (sr->ip_type == SR_TYPE_V2) { - errconfig_offs = ERRCONFIG_V2; - errconfig_mask = ERRCONFIG_VPBOUNDINTST_V2; - } + if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1) + mask |= ERRCONFIG_STATUS_V1_MASK; + else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2) + mask |= ERRCONFIG_VPBOUNDINTST_V2; + + reg_val = __raw_readl(sr->base + offset); + reg_val &= ~mask; - if (offset == errconfig_offs) - reg_val &= ~errconfig_mask; + value &= mask; reg_val |= value; @@ -128,21 +123,28 @@ static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm) static irqreturn_t sr_interrupt(int irq, void *data) { - struct omap_sr *sr_info = (struct omap_sr *)data; + struct omap_sr *sr_info = data; u32 status = 0; - if (sr_info->ip_type == SR_TYPE_V1) { + switch (sr_info->ip_type) { + case SR_TYPE_V1: /* Read the status bits */ status = sr_read_reg(sr_info, ERRCONFIG_V1); /* Clear them by writing back */ sr_write_reg(sr_info, ERRCONFIG_V1, status); - } else if (sr_info->ip_type == SR_TYPE_V2) { + break; + case SR_TYPE_V2: /* Read the status bits */ status = sr_read_reg(sr_info, IRQSTATUS); /* Clear them by writing back */ sr_write_reg(sr_info, IRQSTATUS, status); + break; + default: + dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n", + sr_info->ip_type); + return IRQ_NONE; } if (sr_class->notify) @@ -166,6 +168,7 @@ static void sr_set_clk_length(struct omap_sr *sr) __func__); return; } + sys_clk_speed = clk_get_rate(sys_ck); clk_put(sys_ck); @@ -267,7 +270,7 @@ static int sr_late_init(struct omap_sr *sr_info) goto error; } ret = request_irq(sr_info->irq, sr_interrupt, - 0, name, (void *)sr_info); + 0, name, sr_info); if (ret) goto error; disable_irq(sr_info->irq); @@ -288,12 +291,15 @@ error: "not function as desired\n", __func__); kfree(name); kfree(sr_info); + return ret; } static void sr_v1_disable(struct omap_sr *sr) { int timeout = 0; + int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST | + ERRCONFIG_MCUBOUNDINTST; /* Enable MCUDisableAcknowledge interrupt */ sr_modify_reg(sr, ERRCONFIG_V1, @@ -302,13 +308,13 @@ static void sr_v1_disable(struct omap_sr *sr) /* SRCONFIG - disable SR */ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); - /* Disable all other SR interrupts and clear the status */ + /* Disable all other SR interrupts and clear the status as needed */ + if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1) + errconf_val |= ERRCONFIG_VPBOUNDINTST_V1; sr_modify_reg(sr, ERRCONFIG_V1, (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1), - (ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST | - ERRCONFIG_MCUBOUNDINTST | - ERRCONFIG_VPBOUNDINTST_V1)); + errconf_val); /* * Wait for SR to be disabled. @@ -337,9 +343,17 @@ static void sr_v2_disable(struct omap_sr *sr) /* SRCONFIG - disable SR */ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); - /* Disable all other SR interrupts and clear the status */ - sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, + /* + * Disable all other SR interrupts and clear the status + * write to status register ONLY on need basis - only if status + * is set. + */ + if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2) + sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, ERRCONFIG_VPBOUNDINTST_V2); + else + sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, + 0x0); sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT | IRQENABLE_MCUBOUNDSINT)); @@ -398,15 +412,16 @@ static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs) */ int sr_configure_errgen(struct voltagedomain *voltdm) { - u32 sr_config, sr_errconfig, errconfig_offs, vpboundint_en; - u32 vpboundint_st, senp_en = 0, senn_en = 0; + u32 sr_config, sr_errconfig, errconfig_offs; + u32 vpboundint_en, vpboundint_st; + u32 senp_en = 0, senn_en = 0; u8 senp_shift, senn_shift; struct omap_sr *sr = _sr_lookup(voltdm); if (IS_ERR(sr)) { pr_warning("%s: omap_sr struct for sr_%s not found\n", __func__, voltdm->name); - return -EINVAL; + return PTR_ERR(sr); } if (!sr->clk_length) @@ -418,20 +433,23 @@ int sr_configure_errgen(struct voltagedomain *voltdm) sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN; - if (sr->ip_type == SR_TYPE_V1) { + switch (sr->ip_type) { + case SR_TYPE_V1: sr_config |= SRCONFIG_DELAYCTRL; senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; errconfig_offs = ERRCONFIG_V1; vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; - } else if (sr->ip_type == SR_TYPE_V2) { + break; + case SR_TYPE_V2: senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; errconfig_offs = ERRCONFIG_V2; vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; - } else { + break; + default: dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" "module without specifying the ip\n", __func__); return -EINVAL; @@ -447,8 +465,55 @@ int sr_configure_errgen(struct voltagedomain *voltdm) sr_errconfig); /* Enabling the interrupts if the ERROR module is used */ - sr_modify_reg(sr, errconfig_offs, - vpboundint_en, (vpboundint_en | vpboundint_st)); + sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st), + vpboundint_en); + + return 0; +} + +/** + * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component + * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * + * This API is to be called from the smartreflex class driver to + * disable the error generator module inside the smartreflex module. + * + * Returns 0 on success and error value in case of failure. + */ +int sr_disable_errgen(struct voltagedomain *voltdm) +{ + u32 errconfig_offs; + u32 vpboundint_en, vpboundint_st; + struct omap_sr *sr = _sr_lookup(voltdm); + + if (IS_ERR(sr)) { + pr_warning("%s: omap_sr struct for sr_%s not found\n", + __func__, voltdm->name); + return PTR_ERR(sr); + } + + switch (sr->ip_type) { + case SR_TYPE_V1: + errconfig_offs = ERRCONFIG_V1; + vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; + vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; + break; + case SR_TYPE_V2: + errconfig_offs = ERRCONFIG_V2; + vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; + vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; + break; + default: + dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" + "module without specifying the ip\n", __func__); + return -EINVAL; + } + + /* Disable the interrupts of ERROR module */ + sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0); + + /* Disable the Sensor and errorgen */ + sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0); return 0; } @@ -475,7 +540,7 @@ int sr_configure_minmax(struct voltagedomain *voltdm) if (IS_ERR(sr)) { pr_warning("%s: omap_sr struct for sr_%s not found\n", __func__, voltdm->name); - return -EINVAL; + return PTR_ERR(sr); } if (!sr->clk_length) @@ -488,14 +553,17 @@ int sr_configure_minmax(struct voltagedomain *voltdm) SRCONFIG_SENENABLE | (sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT); - if (sr->ip_type == SR_TYPE_V1) { + switch (sr->ip_type) { + case SR_TYPE_V1: sr_config |= SRCONFIG_DELAYCTRL; senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; - } else if (sr->ip_type == SR_TYPE_V2) { + break; + case SR_TYPE_V2: senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; - } else { + break; + default: dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" "module without specifying the ip\n", __func__); return -EINVAL; @@ -511,20 +579,27 @@ int sr_configure_minmax(struct voltagedomain *voltdm) * Enabling the interrupts if MINMAXAVG module is used. * TODO: check if all the interrupts are mandatory */ - if (sr->ip_type == SR_TYPE_V1) { + switch (sr->ip_type) { + case SR_TYPE_V1: sr_modify_reg(sr, ERRCONFIG_V1, (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUBOUNDINTEN), (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST | ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST)); - } else if (sr->ip_type == SR_TYPE_V2) { + break; + case SR_TYPE_V2: sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT | IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT); sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT | IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT); + break; + default: + dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" + "module without specifying the ip\n", __func__); + return -EINVAL; } return 0; @@ -543,15 +618,15 @@ int sr_configure_minmax(struct voltagedomain *voltdm) */ int sr_enable(struct voltagedomain *voltdm, unsigned long volt) { - u32 nvalue_reciprocal; struct omap_volt_data *volt_data; struct omap_sr *sr = _sr_lookup(voltdm); + u32 nvalue_reciprocal; int ret; if (IS_ERR(sr)) { pr_warning("%s: omap_sr struct for sr_%s not found\n", __func__, voltdm->name); - return -EINVAL; + return PTR_ERR(sr); } volt_data = omap_voltage_get_voltdata(sr->voltdm, volt); @@ -559,7 +634,7 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt) if (IS_ERR(volt_data)) { dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table" "for nominal voltage %ld\n", __func__, volt); - return -ENODATA; + return PTR_ERR(volt_data); } nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs); @@ -617,10 +692,17 @@ void sr_disable(struct voltagedomain *voltdm) * disable the clocks. */ if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) { - if (sr->ip_type == SR_TYPE_V1) + switch (sr->ip_type) { + case SR_TYPE_V1: sr_v1_disable(sr); - else if (sr->ip_type == SR_TYPE_V2) + break; + case SR_TYPE_V2: sr_v2_disable(sr); + break; + default: + dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n", + sr->ip_type); + } } pm_runtime_put_sync_suspend(&sr->pdev->dev); @@ -779,10 +861,10 @@ void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data) sr_pmic_data = pmic_data; } -/* PM Debug Fs enteries to enable disable smartreflex. */ +/* PM Debug FS entries to enable and disable smartreflex. */ static int omap_sr_autocomp_show(void *data, u64 *val) { - struct omap_sr *sr_info = (struct omap_sr *) data; + struct omap_sr *sr_info = data; if (!sr_info) { pr_warning("%s: omap_sr struct not found\n", __func__); @@ -796,7 +878,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val) static int omap_sr_autocomp_store(void *data, u64 val) { - struct omap_sr *sr_info = (struct omap_sr *) data; + struct omap_sr *sr_info = data; if (!sr_info) { pr_warning("%s: omap_sr struct not found\n", __func__); @@ -804,7 +886,7 @@ static int omap_sr_autocomp_store(void *data, u64 val) } /* Sanity check */ - if (val && (val != 1)) { + if (val > 1) { pr_warning("%s: Invalid argument %lld\n", __func__, val); return -EINVAL; } @@ -821,11 +903,11 @@ static int omap_sr_autocomp_store(void *data, u64 val) } DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show, - omap_sr_autocomp_store, "%llu\n"); + omap_sr_autocomp_store, "%llu\n"); static int __init omap_sr_probe(struct platform_device *pdev) { - struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); + struct omap_sr *sr_info; struct omap_sr_data *pdata = pdev->dev.platform_data; struct resource *mem, *irq; struct dentry *nvalue_dir; @@ -833,12 +915,15 @@ static int __init omap_sr_probe(struct platform_device *pdev) int i, ret = 0; char *name; + sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); if (!sr_info) { dev_err(&pdev->dev, "%s: unable to allocate sr_info\n", __func__); return -ENOMEM; } + platform_set_drvdata(pdev, sr_info); + if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); ret = -EINVAL; @@ -904,7 +989,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__); if (!sr_dbg_dir) { sr_dbg_dir = debugfs_create_dir("smartreflex", NULL); - if (!sr_dbg_dir) { + if (IS_ERR_OR_NULL(sr_dbg_dir)) { ret = PTR_ERR(sr_dbg_dir); pr_err("%s:sr debugfs dir creation failed(%d)\n", __func__, ret); @@ -921,7 +1006,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) } sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir); kfree(name); - if (IS_ERR(sr_info->dbg_dir)) { + if (IS_ERR_OR_NULL(sr_info->dbg_dir)) { dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); ret = PTR_ERR(sr_info->dbg_dir); @@ -938,7 +1023,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) &sr_info->err_minlimit); nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir); - if (IS_ERR(nvalue_dir)) { + if (IS_ERR_OR_NULL(nvalue_dir)) { dev_err(&pdev->dev, "%s: Unable to create debugfs directory" "for n-values\n", __func__); ret = PTR_ERR(nvalue_dir); @@ -994,7 +1079,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) if (IS_ERR(sr_info)) { dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", __func__); - return -EINVAL; + return PTR_ERR(sr_info); } if (sr_info->autocomp_active) @@ -1011,8 +1096,32 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) return 0; } +static void __devexit omap_sr_shutdown(struct platform_device *pdev) +{ + struct omap_sr_data *pdata = pdev->dev.platform_data; + struct omap_sr *sr_info; + + if (!pdata) { + dev_err(&pdev->dev, "%s: platform data missing\n", __func__); + return; + } + + sr_info = _sr_lookup(pdata->voltdm); + if (IS_ERR(sr_info)) { + dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", + __func__); + return; + } + + if (sr_info->autocomp_active) + sr_stop_vddautocomp(sr_info); + + return; +} + static struct platform_driver smartreflex_driver = { - .remove = omap_sr_remove, + .remove = __devexit_p(omap_sr_remove), + .shutdown = __devexit_p(omap_sr_shutdown), .driver = { .name = "smartreflex", }, @@ -1042,12 +1151,12 @@ static int __init sr_init(void) return 0; } +late_initcall(sr_init); static void __exit sr_exit(void) { platform_driver_unregister(&smartreflex_driver); } -late_initcall(sr_init); module_exit(sr_exit); MODULE_DESCRIPTION("OMAP Smartreflex Driver"); diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h index 5f35b9e25556..5809141171f8 100644 --- a/arch/arm/mach-omap2/smartreflex.h +++ b/arch/arm/mach-omap2/smartreflex.h @@ -152,6 +152,15 @@ struct omap_sr_pmic_data { void (*sr_pmic_init) (void); }; +/** + * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. + * + * @sensor_voltdm_name: Name of voltdomain of SR instance + */ +struct omap_smartreflex_dev_attr { + const char *sensor_voltdm_name; +}; + #ifdef CONFIG_OMAP_SMARTREFLEX /* * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. @@ -231,6 +240,7 @@ void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); int sr_enable(struct voltagedomain *voltdm, unsigned long volt); void sr_disable(struct voltagedomain *voltdm); int sr_configure_errgen(struct voltagedomain *voltdm); +int sr_disable_errgen(struct voltagedomain *voltdm); int sr_configure_minmax(struct voltagedomain *voltdm); /* API to register the smartreflex class driver with the smartreflex driver */ diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 9f43fcc05d3e..a503e1e8358c 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -69,11 +69,12 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, sr_data->nvalue_count = count; } -static int sr_dev_init(struct omap_hwmod *oh, void *user) +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) { struct omap_sr_data *sr_data; struct platform_device *pdev; struct omap_volt_data *volt_data; + struct omap_smartreflex_dev_attr *sr_dev_attr; char *name = "smartreflex"; static int i; @@ -84,9 +85,11 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user) return -ENOMEM; } - if (!oh->vdd_name) { + sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; + if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { pr_err("%s: No voltage domain specified for %s." - "Cannot initialize\n", __func__, oh->name); + "Cannot initialize\n", __func__, + oh->name); goto exit; } @@ -94,10 +97,10 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; - sr_data->voltdm = voltdm_lookup(oh->vdd_name); + sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); if (IS_ERR(sr_data->voltdm)) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", - __func__, oh->vdd_name); + __func__, sr_dev_attr->sensor_voltdm_name); goto exit; } diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index ff9b9dbcb30e..ee0bfcc1410f 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -29,10 +29,12 @@ * These crashes may be intermittent. */ #include <linux/linkage.h> + #include <asm/assembler.h> -#include <mach/io.h> + #include <mach/hardware.h> +#include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index 76730209fa0e..d4d39ef04769 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -29,10 +29,12 @@ * These crashes may be intermittent. */ #include <linux/linkage.h> + #include <asm/assembler.h> -#include <mach/io.h> + #include <mach/hardware.h> +#include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 6f5849aaa7c0..df5a21322b0a 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -26,11 +26,12 @@ * MA 02111-1307 USA */ #include <linux/linkage.h> + #include <asm/assembler.h> -#include <mach/hardware.h> -#include <mach/io.h> +#include <mach/hardware.h> +#include "iomap.h" #include "sdrc.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c deleted file mode 100644 index 31c0ac4cd66a..000000000000 --- a/arch/arm/mach-omap2/timer-mpu.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * The MPU local timer source file. In OMAP4, both cortex-a9 cores have - * own timer in it's MPU domain. These timers will be driving the - * linux kernel SMP tick framework when active. These timers are not - * part of the wake up domain. - * - * Copyright (C) 2009 Texas Instruments, Inc. - * - * Author: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This file is based on arm realview smp platform file. - * Copyright (C) 2002 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/clockchips.h> -#include <asm/irq.h> -#include <asm/smp_twd.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - /* Local timers are not supprted on OMAP4430 ES1.0 */ - if (omap_rev() == OMAP4430_REV_ES1_0) - return -ENXIO; - - evt->irq = OMAP44XX_IRQ_LOCALTIMER; - twd_timer_setup(evt); - return 0; -} - diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 5c9acea95761..c512bac69ec5 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -39,7 +39,7 @@ #include <asm/mach/time.h> #include <plat/dmtimer.h> -#include <asm/localtimer.h> +#include <asm/smp_twd.h> #include <asm/sched_clock.h> #include "common.h" #include <plat/omap_hwmod.h> @@ -324,14 +324,26 @@ OMAP_SYS_TIMER(3_secure) #endif #ifdef CONFIG_ARCH_OMAP4 -static void __init omap4_timer_init(void) -{ #ifdef CONFIG_LOCAL_TIMERS - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); - BUG_ON(!twd_base); +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, + OMAP44XX_LOCAL_TWD_BASE, + OMAP44XX_IRQ_LOCALTIMER); #endif + +static void __init omap4_timer_init(void) +{ omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE); +#ifdef CONFIG_LOCAL_TIMERS + /* Local timers are not supprted on OMAP4430 ES1.0 */ + if (omap_rev() != OMAP4430_REV_ES1_0) { + int err; + + err = twd_local_timer_register(&twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); + } +#endif } OMAP_SYS_TIMER(4) #endif diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 175b7d86d86a..84da34f9a7cf 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/bug.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 0df88820978d..f95c1bad9dc6 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -61,8 +61,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm) vddmin = voltdm->pmic->vp_vddmin; vddmax = voltdm->pmic->vp_vddmax; - waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * - sys_clk_rate) / 1000; + waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate, + 1000 * voltdm->pmic->slew_rate); vstepmin = voltdm->pmic->vp_vstepmin; vstepmax = voltdm->pmic->vp_vstepmax; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 5dad38ec00ea..24481666d2cd 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -21,6 +21,7 @@ #include <net/dsa.h> #include <asm/page.h> #include <asm/setup.h> +#include <asm/system_misc.h> #include <asm/timex.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 91b0f4788597..c3ed15b8ea25 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -32,6 +32,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> +#include <asm/system_info.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S index d658992e5401..79eb502a1e64 100644 --- a/arch/arm/mach-orion5x/include/mach/entry-macro.S +++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S @@ -10,12 +10,6 @@ #include <mach/bridge-regs.h> - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_preamble, base, tmp ldr \base, =MAIN_IRQ_CAUSE .endm diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h deleted file mode 100644 index 825a2650cefa..000000000000 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/system.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 527213169db0..0c9e413b5805 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -22,7 +22,6 @@ #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/system.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index 9a8697b97dd7..c1b5d8a58037 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -21,7 +21,6 @@ #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/system.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index 09c73659f467..949eaa8f12e3 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -21,7 +21,6 @@ #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/system.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 09a045f0c406..d6a91948e4dc 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -171,13 +171,14 @@ static int __init pcie_setup(struct pci_sys_data *sys) /* * IORESOURCE_IO */ + sys->io_offset = 0; res[0].name = "PCIe I/O Space"; res[0].flags = IORESOURCE_IO; res[0].start = ORION5X_PCIE_IO_BUS_BASE; res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCIe IO resource failed\n"); - pci_add_resource(&sys->resources, &res[0]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); /* * IORESOURCE_MEM @@ -188,9 +189,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCIe Memory resource failed\n"); - pci_add_resource(&sys->resources, &res[1]); - - sys->io_offset = 0; + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); return 1; } @@ -499,13 +498,14 @@ static int __init pci_setup(struct pci_sys_data *sys) /* * IORESOURCE_IO */ + sys->io_offset = 0; res[0].name = "PCI I/O Space"; res[0].flags = IORESOURCE_IO; res[0].start = ORION5X_PCI_IO_BUS_BASE; res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCI IO resource failed\n"); - pci_add_resource(&sys->resources, &res[0]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); /* * IORESOURCE_MEM @@ -516,9 +516,7 @@ static int __init pci_setup(struct pci_sys_data *sys) res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCI Memory resource failed\n"); - pci_add_resource(&sys->resources, &res[1]); - - sys->io_offset = 0; + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S deleted file mode 100644 index 9b505ac00be9..000000000000 --- a/arch/arm/mach-picoxcell/include/mach/entry-macro.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * entry-macro.S - * - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * Low-level IRQ helper macros for picoXcell platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h deleted file mode 100644 index 1a5d8cb57df4..000000000000 --- a/arch/arm/mach-picoxcell/include/mach/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching and wait for interrupt - * tricks. - */ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c index 4cfb40b2ec19..be4c92858509 100644 --- a/arch/arm/mach-pnx4008/core.c +++ b/arch/arm/mach-pnx4008/core.c @@ -32,7 +32,7 @@ #include <asm/mach-types.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c index 7fa4bf2e2125..a4739e9fb2fb 100644 --- a/arch/arm/mach-pnx4008/dma.c +++ b/arch/arm/mach-pnx4008/dma.c @@ -24,7 +24,6 @@ #include <linux/io.h> #include <linux/gfp.h> -#include <asm/system.h> #include <mach/hardware.h> #include <mach/dma.h> #include <asm/dma-mapping.h> diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S index db7eeebf30d7..77a555846719 100644 --- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S @@ -25,15 +25,9 @@ #define SIC1_BASE_INT 32 #define SIC2_BASE_INT 64 - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp /* decode the MIC interrupt numbers */ ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h deleted file mode 100644 index 60cfe7188091..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/system.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/system.h - * - * Copyright (C) 2003 Philips Semiconductors - * Copyright (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index 7608c7a288cf..41e4201972d5 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -28,7 +28,6 @@ #include <asm/setup.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c index 0c8aad4bb0dc..0cfe8af3d3be 100644 --- a/arch/arm/mach-pnx4008/time.c +++ b/arch/arm/mach-pnx4008/time.c @@ -24,7 +24,6 @@ #include <linux/irq.h> #include <linux/io.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/leds.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-prima2/include/mach/entry-macro.S b/arch/arm/mach-prima2/include/mach/entry-macro.S index 1c8a50f102a7..86434e7a5be9 100644 --- a/arch/arm/mach-prima2/include/mach/entry-macro.S +++ b/arch/arm/mach-prima2/include/mach/entry-macro.S @@ -20,10 +20,3 @@ cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f movges \irqnr, #0 .endm - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h deleted file mode 100644 index 2c7d2a9d0c92..000000000000 --- a/arch/arm/mach-prima2/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/system.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_SYSTEM_H__ -#define __MACH_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 4b981b82d2a5..895ee8c45009 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -44,6 +44,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/setup.h> +#include <asm/system_info.h> #include <mach/pxa300.h> #include <mach/pxa27x-udc.h> diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 2b8ca0de8a3d..68cc75fac219 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -18,6 +18,7 @@ #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/sizes.h> +#include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <mach/pxa3xx-regs.h> diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 11f1e735966e..de9d45e673fd 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -40,7 +40,6 @@ #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 5bc13121eac5..84f2d7015cfe 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -406,20 +406,17 @@ static struct resource pxa_rtc_resources[] = { [1] = { .start = IRQ_RTC1Hz, .end = IRQ_RTC1Hz, + .name = "rtc 1Hz", .flags = IORESOURCE_IRQ, }, [2] = { .start = IRQ_RTCAlrm, .end = IRQ_RTCAlrm, + .name = "rtc alarm", .flags = IORESOURCE_IRQ, }, }; -struct platform_device sa1100_device_rtc = { - .name = "sa1100-rtc", - .id = -1, -}; - struct platform_device pxa_device_rtc = { .name = "pxa-rtc", .id = -1, @@ -427,6 +424,27 @@ struct platform_device pxa_device_rtc = { .resource = pxa_rtc_resources, }; +static struct resource sa1100_rtc_resources[] = { + { + .start = IRQ_RTC1Hz, + .end = IRQ_RTC1Hz, + .name = "rtc 1Hz", + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_RTCAlrm, + .end = IRQ_RTCAlrm, + .name = "rtc alarm", + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device sa1100_device_rtc = { + .name = "sa1100-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(sa1100_rtc_resources), + .resource = sa1100_rtc_resources, +}; + static struct resource pxa_ac97_resources[] = { [0] = { .start = 0x40500000, diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 5432ecb15def..42254175fcf4 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <mach/hardware.h> -#include <asm/system.h> #include <asm/mach/map.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 208eef1c0485..3fa929d4a4f5 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -28,7 +28,8 @@ #include <linux/mtd/physmap.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> -#include <linux/regulator/bq24022.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/regulator/max1586.h> #include <linux/spi/ads7846.h> @@ -97,9 +98,9 @@ static unsigned long hx4700_pin_config[] __initdata = { /* BTUART */ GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, + GPIO43_BTUART_TXD_LPM_LOW, GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, + GPIO45_BTUART_RTS_LPM_LOW, /* PWM 1 (Backlight) */ GPIO17_PWM1_OUT, @@ -245,6 +246,21 @@ static u16 asic3_gpio_config[] = { ASIC3_GPIOD15_nPIOW, }; +static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = { + [0] = { + .name = "hx4700:amber", + .default_trigger = "ds2760-battery.0-charging-blink-full-solid", + }, + [1] = { + .name = "hx4700:green", + .default_trigger = "unused", + }, + [2] = { + .name = "hx4700:blue", + .default_trigger = "hx4700-radio", + }, +}; + static struct resource asic3_resources[] = { /* GPIO part */ [0] = { @@ -275,6 +291,7 @@ static struct asic3_platform_data asic3_platform_data = { .gpio_config_num = ARRAY_SIZE(asic3_gpio_config), .irq_base = IRQ_BOARD_START, .gpio_base = HX4700_ASIC3_GPIO_BASE, + .leds = asic3_leds, }; static struct platform_device asic3 = { @@ -682,14 +699,34 @@ static struct regulator_init_data bq24022_init_data = { .consumer_supplies = bq24022_consumers, }; -static struct bq24022_mach_info bq24022_info = { - .gpio_nce = GPIO72_HX4700_BQ24022_nCHARGE_EN, - .gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2, - .init_data = &bq24022_init_data, +static struct gpio bq24022_gpios[] = { + { GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" }, +}; + +static struct gpio_regulator_state bq24022_states[] = { + { .value = 100000, .gpios = (0 << 0) }, + { .value = 500000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config bq24022_info = { + .supply_name = "bq24022", + + .enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN, + .enable_high = 0, + .enabled_at_boot = 0, + + .gpios = bq24022_gpios, + .nr_gpios = ARRAY_SIZE(bq24022_gpios), + + .states = bq24022_states, + .nr_states = ARRAY_SIZE(bq24022_states), + + .type = REGULATOR_CURRENT, + .init_data = &bq24022_init_data, }; static struct platform_device bq24022 = { - .name = "bq24022", + .name = "gpio-regulator", .id = -1, .dev = { .platform_data = &bq24022_info, @@ -705,10 +742,9 @@ static void hx4700_set_vpp(struct platform_device *pdev, int vpp) gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp); } -static struct resource strataflash_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_128M - 1, - .flags = IORESOURCE_MEM, +static struct resource strataflash_resource[] = { + [0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M), + [1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M), }; static struct physmap_flash_data strataflash_data = { @@ -719,8 +755,8 @@ static struct physmap_flash_data strataflash_data = { static struct platform_device strataflash = { .name = "physmap-flash", .id = -1, - .resource = &strataflash_resource, - .num_resources = 1, + .resource = strataflash_resource, + .num_resources = ARRAY_SIZE(strataflash_resource), .dev = { .platform_data = &strataflash_data, }, @@ -788,17 +824,6 @@ static struct platform_device audio = { /* - * PCMCIA - */ - -static struct platform_device pcmcia = { - .name = "hx4700-pcmcia", - .dev = { - .parent = &asic3.dev, - }, -}; - -/* * Platform devices */ @@ -814,7 +839,6 @@ static struct platform_device *devices[] __initdata = { &power_supply, &strataflash, &audio, - &pcmcia, }; static struct gpio global_gpios[] = { @@ -830,7 +854,6 @@ static struct gpio global_gpios[] = { { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, - { GPIO105_HX4700_nIR_ON, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, }; static void __init hx4700_init(void) diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index f02fa1e6ba86..954641e6c8b1 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -174,7 +174,6 @@ enum balloon3_features { #define BALLOON3_AUX_NIRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ) #define BALLOON3_CODEC_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ) -#define BALLOON3_S0_CD_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_S0_CD) #define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16) diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S deleted file mode 100644 index 260c0c17692a..000000000000 --- a/arch/arm/mach-pxa/include/mach/entry-macro.S +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for PXA-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index ec0f0b0b6744..a65867209aa0 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -158,7 +158,9 @@ #define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) #define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) #define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) +#define GPIO45_BTUART_RTS_LPM_LOW MFP_CFG_OUT(GPIO45, AF2, DRIVE_LOW) #define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) +#define GPIO43_BTUART_TXD_LPM_LOW MFP_CFG_OUT(GPIO43, AF2, DRIVE_LOW) /* STUART */ #define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h deleted file mode 100644 index c5afacd3cc0b..000000000000 --- a/arch/arm/mach-pxa/include/mach/system.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/system.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c index 8b9c17142d5a..06b060025d11 100644 --- a/arch/arm/mach-pxa/leds-idp.c +++ b/arch/arm/mach-pxa/leds-idp.c @@ -16,7 +16,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <mach/pxa25x.h> #include <mach/idp.h> diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c index e26d5efe1969..0bd85c884a7c 100644 --- a/arch/arm/mach-pxa/leds-lubbock.c +++ b/arch/arm/mach-pxa/leds-lubbock.c @@ -15,7 +15,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <mach/pxa25x.h> #include <mach/lubbock.h> diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c index db4af5eee8b2..4058ab340fe6 100644 --- a/arch/arm/mach-pxa/leds-mainstone.c +++ b/arch/arm/mach-pxa/leds-mainstone.c @@ -14,7 +14,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <mach/pxa27x.h> #include <mach/mainstone.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 6ebd276aebeb..6bb3f47b1f14 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -223,6 +223,7 @@ static struct resource sa1111_resources[] = { static struct sa1111_platform_data sa1111_info = { .irq_base = LUBBOCK_SA1111_IRQ_BASE, + .disable_devs = SA1111_DEVID_SAC, }; static struct platform_device sa1111_device = { diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 3d6baf91396c..6f4785b347c2 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -25,7 +25,8 @@ #include <linux/mtd/physmap.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> -#include <linux/regulator/bq24022.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> #include <linux/i2c/pxa-i2c.h> @@ -33,6 +34,7 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> #include <mach/pxa27x.h> #include <mach/magician.h> @@ -596,14 +598,34 @@ static struct regulator_init_data bq24022_init_data = { .consumer_supplies = bq24022_consumers, }; -static struct bq24022_mach_info bq24022_info = { - .gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, - .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2, - .init_data = &bq24022_init_data, +static struct gpio bq24022_gpios[] = { + { EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" }, +}; + +static struct gpio_regulator_state bq24022_states[] = { + { .value = 100000, .gpios = (0 << 0) }, + { .value = 500000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config bq24022_info = { + .supply_name = "bq24022", + + .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + .enable_high = 0, + .enabled_at_boot = 0, + + .gpios = bq24022_gpios, + .nr_gpios = ARRAY_SIZE(bq24022_gpios), + + .states = bq24022_states, + .nr_states = ARRAY_SIZE(bq24022_states), + + .type = REGULATOR_CURRENT, + .init_data = &bq24022_init_data, }; static struct platform_device bq24022 = { - .name = "bq24022", + .name = "gpio-regulator", .id = -1, .dev = { .platform_data = &bq24022_info, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 744baee12c0c..89d98c832189 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -34,7 +34,6 @@ #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 3918a672238e..1570d457fea3 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -89,6 +89,7 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL), INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL), INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 5ce434b95e87..47601f80e6e7 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -231,6 +231,7 @@ static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL), INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL), INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; void __init pxa95x_init_irq(void) diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index c8497b00cdfe..b4528899ef08 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -9,6 +9,7 @@ #include <linux/gpio.h> #include <linux/io.h> #include <asm/proc-fns.h> +#include <asm/system_misc.h> #include <mach/regs-ost.h> #include <mach/reset.h> diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 023d6ca789de..7a3d342a7732 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -57,6 +57,7 @@ #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/sizes.h> +#include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index a4dd1c347050..af3d4f7646d7 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -32,6 +32,7 @@ #include <asm/mach-types.h> #include <asm/suspend.h> +#include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index acd329afc3ac..45868bb43cbd 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -33,7 +33,6 @@ #include <linux/clkdev.h> #include <linux/mtd/physmap.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/leds.h> diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 735b57aaf2d6..f8f2c0ac4c01 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -28,21 +28,11 @@ #include <asm/setup.h> #include <asm/leds.h> -#define AMBA_DEVICE(name,busid,base,plat) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = REALVIEW_##base##_BASE, \ - .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0, \ - .irq = base##_IRQ, \ -} +#define APB_DEVICE(name, busid, base, plat) \ +static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) + +#define AHB_DEVICE(name, busid, base, plat) \ +static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) struct machine_desc; diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index eb55f05bef3a..57d9efba2956 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_plat.h> extern volatile int pen_release; diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S deleted file mode 100644 index e8a5179c2653..000000000000 --- a/arch/arm/mach-realview/include/mach/entry-macro.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for RealView platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h index 204d5378f309..d6b5073692d2 100644 --- a/arch/arm/mach-realview/include/mach/irqs-eb.h +++ b/arch/arm/mach-realview/include/mach/irqs-eb.h @@ -96,16 +96,19 @@ #define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) #define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) -#define IRQ_EB11MP_UART2 -1 -#define IRQ_EB11MP_UART3 -1 -#define IRQ_EB11MP_CLCD -1 -#define IRQ_EB11MP_DMA -1 -#define IRQ_EB11MP_WDOG -1 -#define IRQ_EB11MP_GPIO0 -1 -#define IRQ_EB11MP_GPIO1 -1 -#define IRQ_EB11MP_GPIO2 -1 -#define IRQ_EB11MP_SCI -1 -#define IRQ_EB11MP_SSP -1 +/* + * The 11MPcore tile leaves the following unconnected. + */ +#define IRQ_EB11MP_UART2 0 +#define IRQ_EB11MP_UART3 0 +#define IRQ_EB11MP_CLCD 0 +#define IRQ_EB11MP_DMA 0 +#define IRQ_EB11MP_WDOG 0 +#define IRQ_EB11MP_GPIO0 0 +#define IRQ_EB11MP_GPIO1 0 +#define IRQ_EB11MP_GPIO2 0 +#define IRQ_EB11MP_SCI 0 +#define IRQ_EB11MP_SSP 0 #define NR_GIC_EB11MP 2 diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 5c3c625e3e04..708f84156f2c 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -40,6 +40,7 @@ #define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) #define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) #define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16) #define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ #define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ #define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ @@ -73,7 +74,6 @@ #define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ #define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ -#define IRQ_PB1176_GPIO0 -1 #define IRQ_PB1176_SCTL -1 #define NR_GIC_PB1176 2 diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h deleted file mode 100644 index 471b671159ce..000000000000 --- a/arch/arm/mach-realview/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 9578145f2df0..baf382c5e776 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -36,7 +36,7 @@ #include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/localtimer.h> +#include <asm/smp_twd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -135,63 +135,63 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } +#define GPIO2_IRQ { IRQ_EB_GPIO2 } +#define GPIO3_IRQ { IRQ_EB_GPIO3 } -#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } +#define AACI_IRQ { IRQ_EB_AACI } #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } +#define KMI0_IRQ { IRQ_EB_KMI0 } +#define KMI1_IRQ { IRQ_EB_KMI1 } /* * These devices are connected directly to the multi-layer AHB switch */ -#define EB_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } +#define EB_SMC_IRQ { } +#define MPMC_IRQ { } +#define EB_CLCD_IRQ { IRQ_EB_CLCD } +#define DMAC_IRQ { IRQ_EB_DMA } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } -#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } +#define SCTL_IRQ { } +#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG } +#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 } +#define GPIO1_IRQ { IRQ_EB_GPIO1 } +#define EB_RTC_IRQ { IRQ_EB_RTC } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } -#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } +#define SCI_IRQ { IRQ_EB_SCI } +#define EB_UART0_IRQ { IRQ_EB_UART0 } +#define EB_UART1_IRQ { IRQ_EB_UART1 } +#define EB_UART2_IRQ { IRQ_EB_UART2 } +#define EB_UART3_IRQ { IRQ_EB_UART3 } +#define EB_SSP_IRQ { IRQ_EB_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL); -AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL); +AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, @@ -383,6 +383,23 @@ static void realview_eb11mp_fixup(void) realview_eb_isp1761_resources[1].end = IRQ_EB11MP_USB; } +#ifdef CONFIG_HAVE_ARM_TWD +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, + REALVIEW_EB11MP_TWD_BASE, + IRQ_LOCALTIMER); + +static void __init realview_eb_twd_init(void) +{ + if (core_tile_eb11mp() || core_tile_a9mp()) { + int err = twd_local_timer_register(&twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); + } +} +#else +#define realview_eb_twd_init() do { } while(0) +#endif + static void __init realview_eb_timer_init(void) { unsigned int timer_irq; @@ -392,15 +409,13 @@ static void __init realview_eb_timer_init(void) timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20; - if (core_tile_eb11mp() || core_tile_a9mp()) { -#ifdef CONFIG_LOCAL_TIMERS - twd_base = __io_address(REALVIEW_EB11MP_TWD_BASE); -#endif + if (core_tile_eb11mp() || core_tile_a9mp()) timer_irq = IRQ_EB11MP_TIMER0_1; - } else + else timer_irq = IRQ_EB_TIMER0_1; realview_timer_init(timer_irq); + realview_eb_twd_init(); } static struct sys_timer realview_eb_timer = { diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index e4abe94fb11a..b1d7cafa1a6d 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -132,50 +132,50 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * RealView PB1176 AMBA devices */ -#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PB1176_GPIO2 } +#define GPIO3_IRQ { IRQ_PB1176_GPIO3 } +#define AACI_IRQ { IRQ_PB1176_AACI } #define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } -#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } -#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } -#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } -#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } -#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } -#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } -#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } -#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } -#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PB1176_KMI0 } +#define KMI1_IRQ { IRQ_PB1176_KMI1 } +#define PB1176_SMC_IRQ { } +#define MPMC_IRQ { } +#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD } +#define SCTL_IRQ { } +#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG } +#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 } +#define GPIO1_IRQ { IRQ_PB1176_GPIO1 } +#define PB1176_RTC_IRQ { IRQ_DC1176_RTC } +#define SCI_IRQ { IRQ_PB1176_SCI } +#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 } +#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 } +#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 } +#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 } +#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 } +#define PB1176_SSP_IRQ { IRQ_DC1176_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); -AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); -AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); +AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); +APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); +AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart0_device, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 2147335f66f5..a98c536e3327 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -36,7 +36,7 @@ #include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/localtimer.h> +#include <asm/smp_twd.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> @@ -127,52 +127,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PB11MPCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 } +#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 } +#define AACI_IRQ { IRQ_TC11MP_AACI } #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } -#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } -#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } -#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } -#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } -#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } -#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } -#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } -#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_TC11MP_KMI0 } +#define KMI1_IRQ { IRQ_TC11MP_KMI1 } +#define PB11MP_SMC_IRQ { } +#define MPMC_IRQ { } +#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD } +#define DMAC_IRQ { IRQ_PB11MP_DMAC } +#define SCTL_IRQ { } +#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG } +#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 } +#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 } +#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC } +#define SCI_IRQ { IRQ_PB11MP_SCI } +#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 } +#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 } +#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 } +#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 } +#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, @@ -290,6 +290,21 @@ static void __init gic_init_irq(void) gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1); } +#ifdef CONFIG_HAVE_ARM_TWD +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, + REALVIEW_TC11MP_TWD_BASE, + IRQ_LOCALTIMER); + +static void __init realview_pb11mp_twd_init(void) +{ + int err = twd_local_timer_register(&twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); +} +#else +#define realview_pb11mp_twd_init() do {} while(0) +#endif + static void __init realview_pb11mp_timer_init(void) { timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE); @@ -297,10 +312,8 @@ static void __init realview_pb11mp_timer_init(void) timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20; -#ifdef CONFIG_LOCAL_TIMERS - twd_base = __io_address(REALVIEW_TC11MP_TWD_BASE); -#endif realview_timer_init(IRQ_TC11MP_TIMER0_1); + realview_pb11mp_twd_init(); } static struct sys_timer realview_pb11mp_timer = { diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 25b2e59296f8..59650174e6ed 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -122,52 +122,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBA8Core AMBA devices */ -#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PBA8_GPIO2 } +#define GPIO3_IRQ { IRQ_PBA8_GPIO3 } +#define AACI_IRQ { IRQ_PBA8_AACI } #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } -#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } -#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } -#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } -#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } -#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } -#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } -#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } -#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PBA8_KMI0 } +#define KMI1_IRQ { IRQ_PBA8_KMI1 } +#define PBA8_SMC_IRQ { } +#define MPMC_IRQ { } +#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD } +#define DMAC_IRQ { IRQ_PBA8_DMAC } +#define SCTL_IRQ { } +#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG } +#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 } +#define GPIO1_IRQ { IRQ_PBA8_GPIO1 } +#define PBA8_RTC_IRQ { IRQ_PBA8_RTC } +#define SCI_IRQ { IRQ_PBA8_SCI } +#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 } +#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 } +#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 } +#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 } +#define PBA8_SSP_IRQ { IRQ_PBA8_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index ac715645b860..3f2f605624e9 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -144,52 +144,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBXCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PBX_GPIO2 } +#define GPIO3_IRQ { IRQ_PBX_GPIO3 } +#define AACI_IRQ { IRQ_PBX_AACI } #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } -#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } -#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } -#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } -#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } -#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } -#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } -#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } -#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PBX_KMI0 } +#define KMI1_IRQ { IRQ_PBX_KMI1 } +#define PBX_SMC_IRQ { } +#define MPMC_IRQ { } +#define PBX_CLCD_IRQ { IRQ_PBX_CLCD } +#define DMAC_IRQ { IRQ_PBX_DMAC } +#define SCTL_IRQ { } +#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG } +#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 } +#define GPIO1_IRQ { IRQ_PBX_GPIO1 } +#define PBX_RTC_IRQ { IRQ_PBX_RTC } +#define SCI_IRQ { IRQ_PBX_SCI } +#define PBX_UART0_IRQ { IRQ_PBX_UART0 } +#define PBX_UART1_IRQ { IRQ_PBX_UART1 } +#define PBX_UART2_IRQ { IRQ_PBX_UART2 } +#define PBX_UART3_IRQ { IRQ_PBX_UART3 } +#define PBX_SSP_IRQ { IRQ_PBX_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, @@ -298,6 +298,21 @@ static void __init gic_init_irq(void) } } +#ifdef CONFIG_HAVE_ARM_TWD +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, + REALVIEW_PBX_TILE_TWD_BASE, + IRQ_LOCALTIMER); + +static void __init realview_pbx_twd_init(void) +{ + int err = twd_local_timer_register(&twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); +} +#else +#define realview_pbx_twd_init() do { } while(0) +#endif + static void __init realview_pbx_timer_init(void) { timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE); @@ -305,11 +320,8 @@ static void __init realview_pbx_timer_init(void) timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20; -#ifdef CONFIG_LOCAL_TIMERS - if (core_tile_pbx11mp() || core_tile_pbxa9mp()) - twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE); -#endif realview_timer_init(IRQ_PBX_TIMER0_1); + realview_pbx_twd_init(); } static struct sys_timer realview_pbx_timer = { diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile index aa77bc9efbbb..992e28b4ae9a 100644 --- a/arch/arm/mach-rpc/Makefile +++ b/arch/arm/mach-rpc/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := dma.o irq.o riscpc.o +obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o obj-m := obj-n := obj- := diff --git a/arch/arm/kernel/ecard.c b/arch/arm/mach-rpc/ecard.c index 1651d4950744..b91bc87b3dcf 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -42,6 +42,7 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/kthread.h> +#include <linux/irq.h> #include <linux/io.h> #include <asm/dma.h> @@ -54,10 +55,6 @@ #include "ecard.h" -#ifndef CONFIG_ARCH_RPC -#define HAVE_EXPMASK -#endif - struct ecard_request { void (*fn)(struct ecard_request *); ecard_t *ec; @@ -77,9 +74,6 @@ struct expcard_blacklist { static ecard_t *cards; static ecard_t *slot_to_expcard[MAX_ECARDS]; static unsigned int ectcr; -#ifdef HAS_EXPMASK -static unsigned int have_expmask; -#endif /* List of descriptions of cards which don't have an extended * identification, or chunk directories containing a description. @@ -391,22 +385,10 @@ int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num) static void ecard_def_irq_enable(ecard_t *ec, int irqnr) { -#ifdef HAS_EXPMASK - if (irqnr < 4 && have_expmask) { - have_expmask |= 1 << irqnr; - __raw_writeb(have_expmask, EXPMASK_ENABLE); - } -#endif } static void ecard_def_irq_disable(ecard_t *ec, int irqnr) { -#ifdef HAS_EXPMASK - if (irqnr < 4 && have_expmask) { - have_expmask &= ~(1 << irqnr); - __raw_writeb(have_expmask, EXPMASK_ENABLE); - } -#endif } static int ecard_def_irq_pending(ecard_t *ec) @@ -446,7 +428,7 @@ static expansioncard_ops_t ecard_default_ops = { */ static void ecard_irq_unmask(struct irq_data *d) { - ecard_t *ec = slot_to_ecard(d->irq - 32); + ecard_t *ec = irq_data_get_irq_chip_data(d); if (ec) { if (!ec->ops) @@ -462,7 +444,7 @@ static void ecard_irq_unmask(struct irq_data *d) static void ecard_irq_mask(struct irq_data *d) { - ecard_t *ec = slot_to_ecard(d->irq - 32); + ecard_t *ec = irq_data_get_irq_chip_data(d); if (ec) { if (!ec->ops) @@ -579,7 +561,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc) for (ec = cards; ec; ec = ec->next) { int pending; - if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8) + if (!ec->claimed || !ec->irq || ec->slot_no == 8) continue; if (ec->ops && ec->ops->irqpending) @@ -598,83 +580,6 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc) ecard_check_lockup(desc); } -#ifdef HAS_EXPMASK -static unsigned char priority_masks[] = -{ - 0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff -}; - -static unsigned char first_set[] = -{ - 0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, - 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00 -}; - -static void -ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc) -{ - const unsigned int statusmask = 15; - unsigned int status; - - status = __raw_readb(EXPMASK_STATUS) & statusmask; - if (status) { - unsigned int slot = first_set[status]; - ecard_t *ec = slot_to_ecard(slot); - - if (ec->claimed) { - /* - * this ugly code is so that we can operate a - * prioritorising system: - * - * Card 0 highest priority - * Card 1 - * Card 2 - * Card 3 lowest priority - * - * Serial cards should go in 0/1, ethernet/scsi in 2/3 - * otherwise you will lose serial data at high speeds! - */ - generic_handle_irq(ec->irq); - } else { - printk(KERN_WARNING "card%d: interrupt from unclaimed " - "card???\n", slot); - have_expmask &= ~(1 << slot); - __raw_writeb(have_expmask, EXPMASK_ENABLE); - } - } else - printk(KERN_WARNING "Wild interrupt from backplane (masks)\n"); -} - -static int __init ecard_probeirqhw(void) -{ - ecard_t *ec; - int found; - - __raw_writeb(0x00, EXPMASK_ENABLE); - __raw_writeb(0xff, EXPMASK_STATUS); - found = (__raw_readb(EXPMASK_STATUS) & 15) == 0; - __raw_writeb(0xff, EXPMASK_ENABLE); - - if (found) { - printk(KERN_DEBUG "Expansion card interrupt " - "management hardware found\n"); - - /* for each card present, set a bit to '1' */ - have_expmask = 0x80000000; - - for (ec = cards; ec; ec = ec->next) - have_expmask |= 1 << ec->slot_no; - - __raw_writeb(have_expmask, EXPMASK_ENABLE); - } - - return found; -} -#else -#define ecard_irqexp_handler NULL -#define ecard_probeirqhw() (0) -#endif - static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) { void __iomem *address = NULL; @@ -806,8 +711,8 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot) ec->slot_no = slot; ec->easi = type == ECARD_EASI; - ec->irq = NO_IRQ; - ec->fiq = NO_IRQ; + ec->irq = 0; + ec->fiq = 0; ec->dma = NO_DMA; ec->ops = &ecard_default_ops; @@ -978,8 +883,7 @@ EXPORT_SYMBOL(ecardm_iomap); * If bit 1 of the first byte of the card is set, then the * card does not exist. */ -static int __init -ecard_probe(int slot, card_type_t type) +static int __init ecard_probe(int slot, unsigned irq, card_type_t type) { ecard_t **ecp; ecard_t *ec; @@ -1033,18 +937,18 @@ ecard_probe(int slot, card_type_t type) break; } + ec->irq = irq; + /* * hook the interrupt handlers */ if (slot < 8) { - ec->irq = 32 + slot; irq_set_chip_and_handler(ec->irq, &ecard_chip, handle_level_irq); + irq_set_chip_data(ec->irq, ec); set_irq_flags(ec->irq, IRQF_VALID); } - if (slot == 8) - ec->irq = 11; #ifdef CONFIG_ARCH_RPC /* On RiscPC, only first two slots have DMA capability */ if (slot < 2) @@ -1074,28 +978,30 @@ ecard_probe(int slot, card_type_t type) static int __init ecard_init(void) { struct task_struct *task; - int slot, irqhw; + int slot, irqbase; + + irqbase = irq_alloc_descs(-1, 0, 8, -1); + if (irqbase < 0) + return irqbase; task = kthread_run(ecard_task, NULL, "kecardd"); if (IS_ERR(task)) { printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n", PTR_ERR(task)); + irq_free_descs(irqbase, 8); return PTR_ERR(task); } printk("Probing expansion cards\n"); for (slot = 0; slot < 8; slot ++) { - if (ecard_probe(slot, ECARD_EASI) == -ENODEV) - ecard_probe(slot, ECARD_IOC); + if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV) + ecard_probe(slot, irqbase + slot, ECARD_IOC); } - ecard_probe(8, ECARD_IOC); - - irqhw = ecard_probeirqhw(); + ecard_probe(8, 11, ECARD_IOC); - irq_set_chained_handler(IRQ_EXPANSIONCARD, - irqhw ? ecard_irqexp_handler : ecard_irq_handler); + irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler); ecard_proc_init(); diff --git a/arch/arm/kernel/ecard.h b/arch/arm/mach-rpc/ecard.h index 4642d436be2a..4642d436be2a 100644 --- a/arch/arm/kernel/ecard.h +++ b/arch/arm/mach-rpc/ecard.h diff --git a/arch/arm/mach-rpc/fiq.S b/arch/arm/mach-rpc/fiq.S new file mode 100644 index 000000000000..48ddd57db16e --- /dev/null +++ b/arch/arm/mach-rpc/fiq.S @@ -0,0 +1,16 @@ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/hardware.h> +#include <mach/entry-macro.S> + + .text + + .global rpc_default_fiq_end +ENTRY(rpc_default_fiq_start) + mov r12, #ioc_base_high + .if ioc_base_low + orr r12, r12, #ioc_base_low + .endif + strb r12, [r12, #0x38] @ Disable FIQ register + subs pc, lr, #4 +rpc_default_fiq_end: diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S index 4e7e54144093..7178368d7062 100644 --- a/arch/arm/mach-rpc/include/mach/entry-macro.S +++ b/arch/arm/mach-rpc/include/mach/entry-macro.S @@ -10,7 +10,3 @@ orr \base, \base, #ioc_base_low .endif .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h index 3d2037496e38..6868e178274d 100644 --- a/arch/arm/mach-rpc/include/mach/irqs.h +++ b/arch/arm/mach-rpc/include/mach/irqs.h @@ -42,6 +42,4 @@ */ #define FIQ_START 64 -#define IRQ_TIMER IRQ_TIMER0 - #define NR_IRQS 128 diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h deleted file mode 100644 index 359bab94b6af..000000000000 --- a/arch/arm/mach-rpc/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-rpc/include/mach/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c index 2e1b5309fbab..cf0e669eaf1a 100644 --- a/arch/arm/mach-rpc/irq.c +++ b/arch/arm/mach-rpc/irq.c @@ -5,6 +5,7 @@ #include <asm/mach/irq.h> #include <asm/hardware/iomd.h> #include <asm/irq.h> +#include <asm/fiq.h> static void iomd_ack_irq_a(struct irq_data *d) { @@ -112,6 +113,8 @@ static struct irq_chip iomd_fiq_chip = { .irq_unmask = iomd_unmask_irq_fiq, }; +extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end; + void __init rpc_init_irq(void) { unsigned int irq, flags; @@ -121,6 +124,9 @@ void __init rpc_init_irq(void) iomd_writeb(0, IOMD_FIQMASK); iomd_writeb(0, IOMD_DMAMASK); + set_fiq_handler(&rpc_default_fiq_start, + &rpc_default_fiq_end - &rpc_default_fiq_start); + for (irq = 0; irq < NR_IRQS; irq++) { flags = IRQF_VALID; diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 3d44a59fc0df..f3fa259ce01f 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -28,6 +28,7 @@ #include <asm/page.h> #include <asm/domain.h> #include <asm/setup.h> +#include <asm/system_misc.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -98,15 +99,9 @@ static void __init rpc_map_io(void) } static struct resource acornfb_resources[] = { - { /* VIDC */ - .start = 0x03400000, - .end = 0x035fffff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_VSYNCPULSE, - .end = IRQ_VSYNCPULSE, - .flags = IORESOURCE_IRQ, - }, + /* VIDC */ + DEFINE_RES_MEM(0x03400000, 0x00200000), + DEFINE_RES_IRQ(IRQ_VSYNCPULSE), }; static struct platform_device acornfb_device = { @@ -120,11 +115,7 @@ static struct platform_device acornfb_device = { }; static struct resource iomd_resources[] = { - { - .start = 0x03200000, - .end = 0x0320ffff, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(0x03200000, 0x10000), }; static struct platform_device iomd_device = { @@ -134,18 +125,25 @@ static struct platform_device iomd_device = { .resource = iomd_resources, }; +static struct resource iomd_kart_resources[] = { + DEFINE_RES_IRQ(IRQ_KEYBOARDRX), + DEFINE_RES_IRQ(IRQ_KEYBOARDTX), +}; + static struct platform_device kbd_device = { .name = "kart", .id = -1, .dev = { .parent = &iomd_device.dev, }, + .num_resources = ARRAY_SIZE(iomd_kart_resources), + .resource = iomd_kart_resources, }; static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = 0x03010fe0, - .irq = 10, + .irq = IRQ_SERIALPORT, .uartclk = 1843200, .regshift = 2, .iotype = UPIO_MEM, @@ -167,21 +165,9 @@ static struct pata_platform_info pata_platform_data = { }; static struct resource pata_resources[] = { - [0] = { - .start = 0x030107c0, - .end = 0x030107df, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x03010fd8, - .end = 0x03010fdb, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_HARDDISK, - .end = IRQ_HARDDISK, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0x030107c0, 0x20), + DEFINE_RES_MEM(0x03010fd8, 0x04), + DEFINE_RES_IRQ(IRQ_HARDDISK), }; static struct platform_device pata_device = { diff --git a/arch/arm/common/time-acorn.c b/arch/arm/mach-rpc/time.c index deeed561b168..581fca934bb3 100644 --- a/arch/arm/common/time-acorn.c +++ b/arch/arm/mach-rpc/time.c @@ -85,7 +85,7 @@ static struct irqaction ioc_timer_irq = { static void __init ioc_timer_init(void) { ioctime_init(); - setup_irq(IRQ_TIMER, &ioc_timer_irq); + setup_irq(IRQ_TIMER0, &ioc_timer_irq); } struct sys_timer ioc_timer = { diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 5261a7ed0999..68d89cb96af0 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,42 +2,6 @@ # # Licensed under GPLv2 -config CPU_S3C2410 - bool - depends on ARCH_S3C2410 - select CPU_ARM920T - select S3C2410_CLOCK - select CPU_LLSERIAL_S3C2410 - select S3C2410_PM if PM - select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX - help - Support for S3C2410 and S3C2410A family from the S3C24XX line - of Samsung Mobile CPUs. - -config CPU_S3C2410_DMA - bool - depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) - default y if CPU_S3C2410 || CPU_S3C2442 - help - DMA device selection for S3C2410 and compatible CPUs - -config S3C2410_PM - bool - help - Power Management code common to S3C2410 and better - -config SIMTEC_NOR - bool - help - Internal node to specify machine has simtec NOR mapping - -config MACH_BAST_IDE - bool - select HAVE_PATA_PLATFORM - help - Internal node for machines with an BAST style IDE - interface - # cpu frequency scaling support config S3C2410_CPUFREQ @@ -54,121 +18,3 @@ config S3C2410_PLLTABLE help Select the PLL table for the S3C2410 -menu "S3C2410 Machines" - -config ARCH_SMDK2410 - bool "SMDK2410/A9M2410" - select CPU_S3C2410 - select MACH_SMDK - help - Say Y here if you are using the SMDK2410 or the derived module A9M2410 - <http://www.fsforth.de> - -config ARCH_H1940 - bool "IPAQ H1940" - select CPU_S3C2410 - select PM_H1940 if PM - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - select S3C2410_SETUP_TS - help - Say Y here if you are using the HP IPAQ H1940 - -config H1940BT - tristate "Control the state of H1940 bluetooth chip" - depends on ARCH_H1940 - select RFKILL - help - This is a simple driver that is able to control - the state of built in bluetooth chip on h1940. - -config PM_H1940 - bool - help - Internal node for H1940 and related PM - -config MACH_N30 - bool "Acer N30 family" - select CPU_S3C2410 - select MACH_N35 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you want suppt for the Acer N30, Acer N35, - Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. - -config MACH_N35 - bool - help - Internal node in order to enable support for Acer N35 if Acer N30 is - selected. - -config ARCH_BAST - bool "Simtec Electronics BAST (EB2410ITX)" - select CPU_S3C2410 - select S3C2410_IOTIMING if S3C2410_CPUFREQ - select PM_SIMTEC if PM - select SIMTEC_NOR - select MACH_BAST_IDE - select S3C24XX_DCLK - select ISA - select S3C_DEV_HWMON - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Simtec Electronics EB2410ITX - development board (also known as BAST) - -config MACH_OTOM - bool "NexVision OTOM Board" - select CPU_S3C2410 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Nex Vision OTOM board - -config MACH_AML_M5900 - bool "AML M5900 Series" - select CPU_S3C2410 - select PM_SIMTEC if PM - select S3C_DEV_USB_HOST - help - Say Y here if you are using the American Microsystems M5900 Series - <http://www.amltd.com> - -config BAST_PC104_IRQ - bool "BAST PC104 IRQ support" - depends on ARCH_BAST - default y - help - Say Y here to enable the PC104 IRQ routing on the - Simtec BAST (EB2410ITX) - -config MACH_TCT_HAMMER - bool "TCT Hammer Board" - select CPU_S3C2410 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the TinCanTools Hammer Board - <http://www.tincantools.com> - -config MACH_VR1000 - bool "Thorcom VR1000" - select PM_SIMTEC if PM - select S3C24XX_DCLK - select SIMTEC_NOR - select MACH_BAST_IDE - select CPU_S3C2410 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Thorcom VR1000 board. - -config MACH_QT2410 - bool "QT2410" - select CPU_S3C2410 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Armzone QT2410 - -endmenu diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 782fd81144e9..6b9a316e0041 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -9,32 +9,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o -obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o -obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o -# Machine support - -obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o -obj-$(CONFIG_ARCH_H1940) += mach-h1940.o -obj-$(CONFIG_H1940BT) += h1940-bluetooth.o -obj-$(CONFIG_PM_H1940) += pm-h1940.o -obj-$(CONFIG_MACH_N30) += mach-n30.o -obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o -obj-$(CONFIG_MACH_OTOM) += mach-otom.o -obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o -obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o -obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o -obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o -obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o - -# Common bits of machine support - -obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o - -# machine additions - -obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o diff --git a/arch/arm/mach-s3c2410/common.h b/arch/arm/mach-s3c2410/common.h deleted file mode 100644 index f65dc8062961..000000000000 --- a/arch/arm/mach-s3c2410/common.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S3C2410 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H -#define __ARCH_ARM_MACH_S3C2410_COMMON_H - -void s3c2410_restart(char mode, const char *cmd); - -#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h deleted file mode 100644 index 4d9588373aa5..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/spi.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - SPI Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPI_H -#define __ASM_ARCH_SPI_H __FILE__ - -struct s3c2410_spi_info { - int pin_cs; /* simple gpio cs */ - unsigned int num_cs; /* total chipselects */ - int bus_num; /* bus number to use. */ - - unsigned int use_fiq:1; /* use fiq */ - - void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); - void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); -}; - -/* Standard setup / suspend routines for SPI GPIO pins. */ - -extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, - int enable); - -extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, - int enable); - -extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, - int enable); - -#endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h deleted file mode 100644 index 5e215c1a5c8f..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/system.h +++ /dev/null @@ -1,54 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/system.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> -#include <mach/hardware.h> - -#include <mach/map.h> -#include <mach/idle.h> - -#include <mach/regs-clock.h> - -void (*s3c24xx_idle)(void); - -void s3c24xx_default_idle(void) -{ - unsigned long tmp; - int i; - - /* idle the system by using the idle mode which will wait for an - * interrupt to happen before restarting the system. - */ - - /* Warning: going into idle state upsets jtag scanning */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); - - /* the samsung port seems to do a loop and then unset idle.. */ - for (i = 0; i < 50; i++) { - tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ - } - - /* this bit is not cleared on re-start... */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); -} - -static void arch_idle(void) -{ - if (s3c24xx_idle != NULL) - (s3c24xx_idle)(); - else - s3c24xx_default_idle(); -} diff --git a/arch/arm/mach-s3c2410/usb-simtec.h b/arch/arm/mach-s3c2410/usb-simtec.h deleted file mode 100644 index 03842ede9e71..000000000000 --- a/arch/arm/mach-s3c2410/usb-simtec.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/usb-simtec.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.simtec.co.uk/products/EB2410ITX/ - * - * Simtec BAST and Thorcom VR1000 USB port support functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern int usb_simtec_init(void); - diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index b8b9029e9f2d..c5256f4e90bb 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -2,41 +2,6 @@ # # Licensed under GPLv2 -config CPU_S3C2412 - bool - depends on ARCH_S3C2410 - select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 - select S3C2412_PM if PM - select S3C2412_DMA if S3C2410_DMA - help - Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line - -config CPU_S3C2412_ONLY - bool - depends on ARCH_S3C2410 && !CPU_S3C2410 && \ - !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ - !CPU_S3C2443 && CPU_S3C2412 - default y if CPU_S3C2412 - -config S3C2412_DMA - bool - depends on CPU_S3C2412 - help - Internal config node for S3C2412 DMA support - -config S3C2412_PM - bool - select S3C2412_PM_SLEEP - help - Internal config node to apply S3C2412 power management - -config S3C2412_PM_SLEEP - bool - help - Internal config node to apply sleep for S3C2412 power management. - Can be selected by another SoCs with similar sleep procedure. - # Note, the S3C2412 IOtiming support is in plat-s3c24xx config S3C2412_CPUFREQ @@ -46,53 +11,3 @@ config S3C2412_CPUFREQ default y help CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. - -menu "S3C2412 Machines" - -config MACH_JIVE - bool "Logitech Jive" - select CPU_S3C2412 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Logitech Jive. - -config MACH_JIVE_SHOW_BOOTLOADER - bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)" - depends on MACH_JIVE && EXPERIMENTAL - -config MACH_SMDK2413 - bool "SMDK2413" - select CPU_S3C2412 - select MACH_S3C2413 - select MACH_SMDK - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using an SMDK2413 - -config MACH_S3C2413 - bool - help - Internal node for S3C2413 version of SMDK2413, so that - machine_is_s3c2413() will work when MACH_SMDK2413 is - selected - -config MACH_SMDK2412 - bool "SMDK2412" - select MACH_SMDK2413 - help - Say Y here if you are using an SMDK2412 - - Note, this shares support with SMDK2413, so will automatically - select MACH_SMDK2413. - -config MACH_VSTMS - bool "VMSTMS" - select CPU_S3C2412 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using an VSTMS board - -endmenu diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 7e4d95fa8a97..41a6c279fb2f 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -9,16 +9,4 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o -obj-$(CONFIG_CPU_S3C2412) += irq.o -obj-$(CONFIG_CPU_S3C2412) += clock.o -obj-$(CONFIG_S3C2412_DMA) += dma.o -obj-$(CONFIG_S3C2412_PM) += pm.o -obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o - -# Machine support - -obj-$(CONFIG_MACH_JIVE) += mach-jive.o -obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o -obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig deleted file mode 100644 index 84c7b03e5a30..000000000000 --- a/arch/arm/mach-s3c2416/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -# arch/arm/mach-s3c2416/Kconfig -# -# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com> -# -# Licensed under GPLv2 - -# note, this also supports the S3C2450 which is so similar it has the same -# ID code as the S3C2416. - -config CPU_S3C2416 - bool - depends on ARCH_S3C2410 - select CPU_ARM926T - select S3C2416_DMA if S3C2410_DMA - select CPU_LLSERIAL_S3C2440 - select SAMSUNG_CLKSRC - select S3C2443_CLOCK - help - Support for the S3C2416 SoC from the S3C24XX line - -config S3C2416_DMA - bool - depends on CPU_S3C2416 - help - Internal config node for S3C2416 DMA support - -config S3C2416_PM - bool - select S3C2412_PM_SLEEP - help - Internal config node to apply S3C2416 power management - -config S3C2416_SETUP_SDHCI - bool - select S3C2416_SETUP_SDHCI_GPIO - help - Internal helper functions for S3C2416 based SDHCI systems - -config S3C2416_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -menu "S3C2416 Machines" - -config MACH_SMDK2416 - bool "SMDK2416" - select CPU_S3C2416 - select MACH_SMDK - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select S3C2416_SETUP_SDHCI - select S3C2416_PM if PM - help - Say Y here if you are using an SMDK2416 - -endmenu diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile deleted file mode 100644 index ca0cd227f873..000000000000 --- a/arch/arm/mach-s3c2416/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# arch/arm/mach-s3c2416/Makefile -# -# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com> -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o -obj-$(CONFIG_CPU_S3C2416) += irq.o -obj-$(CONFIG_S3C2416_PM) += pm.o -#obj-$(CONFIG_S3C2416_DMA) += dma.o - -# Device setup -obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o - -# Machine support - -obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 914e620f1257..ece7a10fe3c6 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -2,35 +2,6 @@ # # Licensed under GPLv2 -config CPU_S3C2440 - bool - select CPU_ARM920T - select S3C2410_CLOCK - select S3C2410_PM if PM - select S3C2440_DMA if S3C2410_DMA - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help - Support for S3C2440 Samsung Mobile CPU based systems. - -config CPU_S3C2442 - bool - select CPU_ARM920T - select S3C2410_CLOCK - select S3C2410_PM if PM - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help - Support for S3C2442 Samsung Mobile CPU based systems. - -config CPU_S3C244X - bool - depends on CPU_S3C2440 || CPU_S3C2442 - help - Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. - - - config S3C2440_CPUFREQ bool "S3C2440/S3C2442 CPU Frequency scaling support" depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) @@ -64,139 +35,3 @@ config S3C2440_PLL_16934400 default y if CPU_FREQ_S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. - -config S3C2440_DMA - bool - depends on CPU_S3C2440 - help - Support for S3C2440 specific DMA code5A - -menu "S3C2440 and S3C2442 Machines" - -config MACH_ANUBIS - bool "Simtec Electronics ANUBIS" - select CPU_S3C2440 - select S3C24XX_DCLK - select PM_SIMTEC if PM - select HAVE_PATA_PLATFORM - select S3C24XX_GPIO_EXTRA64 - select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Simtec Electronics ANUBIS - development system - -config MACH_NEO1973_GTA02 - bool "Openmoko GTA02 / Freerunner phone" - select CPU_S3C2442 - select MFD_PCF50633 - select PCF50633_GPIO - select I2C - select POWER_SUPPLY - select MACH_NEO1973 - select S3C2410_PWM - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone - -config MACH_OSIRIS - bool "Simtec IM2440D20 (OSIRIS) module" - select CPU_S3C2440 - select S3C24XX_DCLK - select PM_SIMTEC if PM - select S3C24XX_GPIO_EXTRA128 - select S3C2440_XTAL_12000000 - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Simtec IM2440D20 module, also - known as the Osiris. - -config MACH_OSIRIS_DVS - tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" - depends on MACH_OSIRIS - select TPS65010 - help - Say Y/M here if you want to have dynamic voltage scaling support - on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. - - The DVS driver alters the voltage supplied to the ARM core - depending on the frequency it is running at. The driver itself - does not do any of the frequency alteration, which is left up - to the cpufreq driver. - -config MACH_RX3715 - bool "HP iPAQ rx3715" - select CPU_S3C2440 - select S3C2440_XTAL_16934400 - select PM_H1940 if PM - select S3C_DEV_NAND - help - Say Y here if you are using the HP iPAQ rx3715. - -config ARCH_S3C2440 - bool "SMDK2440" - select CPU_S3C2440 - select S3C2440_XTAL_16934400 - select MACH_SMDK - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the SMDK2440. - -config MACH_NEXCODER_2440 - bool "NexVision NEXCODER 2440 Light Board" - select CPU_S3C2440 - select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board - -config SMDK2440_CPU2440 - bool "SMDK2440 with S3C2440 CPU module" - default y if ARCH_S3C2440 - select S3C2440_XTAL_16934400 - select CPU_S3C2440 - -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - select CPU_S3C2442 - -config MACH_AT2440EVB - bool "Avantech AT2440EVB development board" - select CPU_S3C2440 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the AT2440EVB development board - -config MACH_MINI2440 - bool "MINI2440 development board" - select CPU_S3C2440 - select EEPROM_AT24 - select NEW_LEDS - select LEDS_CLASS - select LEDS_TRIGGER - select LEDS_TRIGGER_BACKLIGHT - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here to select support for the MINI2440. Is a 10cm x 10cm board - available via various sources. It can come with a 3.5" or 7" touch LCD. - -config MACH_RX1950 - bool "HP iPAQ rx1950" - select CPU_S3C2442 - select S3C24XX_DCLK - select PM_H1940 if PM - select I2C - select S3C2410_PWM - select S3C_DEV_NAND - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C2440_XTAL_16934400 - help - Say Y here if you're using HP iPAQ rx1950 - -endmenu diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index d5440fa34b04..c46092439814 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -9,33 +9,9 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C2440) += dsc.o -obj-$(CONFIG_CPU_S3C2440) += irq.o -obj-$(CONFIG_CPU_S3C2440) += clock.o -obj-$(CONFIG_S3C2440_DMA) += dma.o - -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o - -# Machine support - -obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o -obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o -obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o -obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o -obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o -obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o -obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o -obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o -obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o - -# extra machine support - -obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h deleted file mode 100644 index 0c1eb1dfc534..000000000000 --- a/arch/arm/mach-s3c2440/common.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S3C2440 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H -#define __ARCH_ARM_MACH_S3C2440_COMMON_H - -void s3c244x_restart(char mode, const char *cmd); - -#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */ diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig deleted file mode 100644 index 8814031516ce..000000000000 --- a/arch/arm/mach-s3c2443/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -config CPU_S3C2443 - bool - depends on ARCH_S3C2410 - select CPU_ARM920T - select S3C2443_DMA if S3C2410_DMA - select CPU_LLSERIAL_S3C2440 - select SAMSUNG_CLKSRC - select S3C2443_CLOCK - help - Support for the S3C2443 SoC from the S3C24XX line - -config S3C2443_DMA - bool - depends on CPU_S3C2443 - help - Internal config node for S3C2443 DMA support - -menu "S3C2443 Machines" - -config MACH_SMDK2443 - bool "SMDK2443" - select CPU_S3C2443 - select MACH_SMDK - select S3C_DEV_HSMMC1 - help - Say Y here if you are using an SMDK2443 - -endmenu diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile deleted file mode 100644 index d1843c9eb8bd..000000000000 --- a/arch/arm/mach-s3c2443/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# arch/arm/mach-s3c2443/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o -obj-$(CONFIG_CPU_S3C2443) += irq.o -obj-$(CONFIG_CPU_S3C2443) += clock.o - -obj-$(CONFIG_S3C2443_DMA) += dma.o - -# Machine support - -obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig new file mode 100644 index 000000000000..0f3a327ebcaa --- /dev/null +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -0,0 +1,538 @@ +# arch/arm/mach-s3c24xx/Kconfig +# +# Copyright (c) 2012 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +if ARCH_S3C24XX + +menu "SAMSUNG S3C24XX SoCs Support" + +comment "S3C24XX SoCs" + +config CPU_S3C2410 + bool "SAMSUNG S3C2410" + default y + select CPU_ARM920T + select S3C2410_CLOCK + select CPU_LLSERIAL_S3C2410 + select S3C2410_PM if PM + select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX + help + Support for S3C2410 and S3C2410A family from the S3C24XX line + of Samsung Mobile CPUs. + +config CPU_S3C2412 + bool "SAMSUNG S3C2412" + depends on ARCH_S3C24XX + select CPU_ARM926T + select CPU_LLSERIAL_S3C2440 + select S3C2412_PM if PM + select S3C2412_DMA if S3C24XX_DMA + help + Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line + +config CPU_S3C2416 + bool "SAMSUNG S3C2416/S3C2450" + depends on ARCH_S3C24XX + select CPU_ARM926T + select CPU_LLSERIAL_S3C2440 + select SAMSUNG_CLKSRC + select S3C2443_COMMON + select S3C2443_DMA if S3C24XX_DMA + select S3C2416_PM if PM + help + Support for the S3C2416 SoC from the S3C24XX line + +config CPU_S3C2440 + bool "SAMSUNG S3C2440" + select CPU_ARM920T + select CPU_LLSERIAL_S3C2440 + select S3C2410_CLOCK + select S3C2410_PM if PM + select S3C2440_DMA if S3C24XX_DMA + help + Support for S3C2440 Samsung Mobile CPU based systems. + +config CPU_S3C2442 + bool "SAMSUNG S3C2442" + select CPU_ARM920T + select CPU_LLSERIAL_S3C2440 + select S3C2410_CLOCK + select S3C2410_PM if PM + help + Support for S3C2442 Samsung Mobile CPU based systems. + +config CPU_S3C244X + def_bool y + depends on CPU_S3C2440 || CPU_S3C2442 + +config CPU_S3C2443 + bool "SAMSUNG S3C2443" + depends on ARCH_S3C24XX + select CPU_ARM920T + select CPU_LLSERIAL_S3C2440 + select SAMSUNG_CLKSRC + select S3C2443_COMMON + select S3C2443_DMA if S3C24XX_DMA + help + Support for the S3C2443 SoC from the S3C24XX line + +# common code + +config S3C24XX_SMDK + bool + help + Common machine code for SMDK2410 and SMDK2440 + +config S3C24XX_SIMTEC_AUDIO + bool + depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) + default y + help + Add audio devices for common Simtec S3C24XX boards + +config S3C24XX_SIMTEC_PM + bool + help + Common power management code for systems that are + compatible with the Simtec style of power management + +config S3C24XX_SIMTEC_USB + bool + help + USB management code for common Simtec S3C24XX boards + +config S3C24XX_SETUP_TS + bool + help + Compile in platform device definition for Samsung TouchScreen. + +# cpu-specific sections + +if CPU_S3C2410 + +config S3C2410_DMA + bool + depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 + help + DMA device selection for S3C2410 and compatible CPUs + +config S3C2410_PM + bool + help + Power Management code common to S3C2410 and better + +config S3C24XX_SIMTEC_NOR + bool + help + Internal node to specify machine has simtec NOR mapping + +config MACH_BAST_IDE + bool + select HAVE_PATA_PLATFORM + help + Internal node for machines with an BAST style IDE + interface + +comment "S3C2410 Boards" + +# +# The "S3C2410 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_AML_M5900 + bool "AML M5900 Series" + select S3C24XX_SIMTEC_PM if PM + select S3C_DEV_USB_HOST + help + Say Y here if you are using the American Microsystems M5900 Series + <http://www.amltd.com> + +config ARCH_BAST + bool "Simtec Electronics BAST (EB2410ITX)" + select S3C2410_IOTIMING if S3C2410_CPUFREQ + select S3C24XX_SIMTEC_PM if PM + select S3C24XX_SIMTEC_NOR + select S3C24XX_SIMTEC_USB + select MACH_BAST_IDE + select S3C24XX_DCLK + select ISA + select S3C_DEV_HWMON + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Simtec Electronics EB2410ITX + development board (also known as BAST) + +config BAST_PC104_IRQ + bool "BAST PC104 IRQ support" + depends on ARCH_BAST + default y + help + Say Y here to enable the PC104 IRQ routing on the + Simtec BAST (EB2410ITX) + +config ARCH_H1940 + bool "IPAQ H1940" + select PM_H1940 if PM + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + select S3C24XX_SETUP_TS + help + Say Y here if you are using the HP IPAQ H1940 + +config H1940BT + tristate "Control the state of H1940 bluetooth chip" + depends on ARCH_H1940 + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on h1940. + +config PM_H1940 + bool + help + Internal node for H1940 and related PM + +config MACH_N30 + bool "Acer N30 family" + select MACH_N35 + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you want suppt for the Acer N30, Acer N35, + Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. + +config MACH_OTOM + bool "NexVision OTOM Board" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Nex Vision OTOM board + +config MACH_QT2410 + bool "QT2410" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Armzone QT2410 + +config ARCH_SMDK2410 + bool "SMDK2410/A9M2410" + select S3C24XX_SMDK + help + Say Y here if you are using the SMDK2410 or the derived module A9M2410 + <http://www.fsforth.de> + +config MACH_TCT_HAMMER + bool "TCT Hammer Board" + select S3C_DEV_USB_HOST + help + Say Y here if you are using the TinCanTools Hammer Board + <http://www.tincantools.com> + +config MACH_VR1000 + bool "Thorcom VR1000" + select S3C24XX_SIMTEC_PM if PM + select S3C24XX_DCLK + select S3C24XX_SIMTEC_NOR + select MACH_BAST_IDE + select S3C_DEV_USB_HOST + select S3C24XX_SIMTEC_USB + help + Say Y here if you are using the Thorcom VR1000 board. + +endif # CPU_S3C2410 + +config S3C2412_PM_SLEEP + bool + help + Internal config node to apply sleep for S3C2412 power management. + Can be selected by another SoCs such as S3C2416 with similar + sleep procedure. + +if CPU_S3C2412 + +config CPU_S3C2412_ONLY + bool + depends on ARCH_S3C24XX && !CPU_S3C2410 && \ + !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2443 && CPU_S3C2412 + default y + +config S3C2412_DMA + bool + help + Internal config node for S3C2412 DMA support + +config S3C2412_PM + bool + help + Internal config node to apply S3C2412 power management + +comment "S3C2412 Boards" + +# +# The "S3C2412 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_JIVE + bool "Logitech Jive" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Logitech Jive. + +config MACH_JIVE_SHOW_BOOTLOADER + bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)" + depends on MACH_JIVE && EXPERIMENTAL + +config MACH_S3C2413 + bool + help + Internal node for S3C2413 version of SMDK2413, so that + machine_is_s3c2413() will work when MACH_SMDK2413 is + selected + +config MACH_SMDK2412 + bool "SMDK2412" + select MACH_SMDK2413 + help + Say Y here if you are using an SMDK2412 + + Note, this shares support with SMDK2413, so will automatically + select MACH_SMDK2413. + +config MACH_SMDK2413 + bool "SMDK2413" + select MACH_S3C2413 + select S3C24XX_SMDK + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using an SMDK2413 + +config MACH_VSTMS + bool "VMSTMS" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using an VSTMS board + +endif # CPU_S3C2412 + +if CPU_S3C2416 + +config S3C2416_PM + bool + select S3C2412_PM_SLEEP + help + Internal config node to apply S3C2416 power management + +config S3C2416_SETUP_SDHCI + bool + select S3C2416_SETUP_SDHCI_GPIO + help + Internal helper functions for S3C2416 based SDHCI systems + +config S3C2416_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + +comment "S3C2416 Boards" + +config MACH_SMDK2416 + bool "SMDK2416" + select S3C24XX_SMDK + select S3C_DEV_FB + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_NAND + select S3C_DEV_USB_HOST + select S3C2416_SETUP_SDHCI + help + Say Y here if you are using an SMDK2416 + +endif # CPU_S3C2416 + +if CPU_S3C2440 + +config S3C2440_DMA + bool + help + Support for S3C2440 specific DMA code5A + +comment "S3C2440 Boards" + +# +# The "S3C2440 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_ANUBIS + bool "Simtec Electronics ANUBIS" + select S3C24XX_DCLK + select S3C24XX_SIMTEC_PM if PM + select HAVE_PATA_PLATFORM + select S3C24XX_GPIO_EXTRA64 + select S3C2440_XTAL_12000000 + select S3C_DEV_USB_HOST + help + Say Y here if you are using the Simtec Electronics ANUBIS + development system + +config MACH_AT2440EVB + bool "Avantech AT2440EVB development board" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the AT2440EVB development board + +config MACH_MINI2440 + bool "MINI2440 development board" + select EEPROM_AT24 + select NEW_LEDS + select LEDS_CLASS + select LEDS_TRIGGER + select LEDS_TRIGGER_BACKLIGHT + select S3C_DEV_NAND + select S3C_DEV_USB_HOST + help + Say Y here to select support for the MINI2440. Is a 10cm x 10cm board + available via various sources. It can come with a 3.5" or 7" touch LCD. + +config MACH_NEXCODER_2440 + bool "NexVision NEXCODER 2440 Light Board" + select S3C2440_XTAL_12000000 + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board + +config MACH_OSIRIS + bool "Simtec IM2440D20 (OSIRIS) module" + select S3C24XX_DCLK + select S3C24XX_SIMTEC_PM if PM + select S3C24XX_GPIO_EXTRA128 + select S3C2440_XTAL_12000000 + select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Simtec IM2440D20 module, also + known as the Osiris. + +config MACH_OSIRIS_DVS + tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" + depends on MACH_OSIRIS + select TPS65010 + help + Say Y/M here if you want to have dynamic voltage scaling support + on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. + + The DVS driver alters the voltage supplied to the ARM core + depending on the frequency it is running at. The driver itself + does not do any of the frequency alteration, which is left up + to the cpufreq driver. + +config MACH_RX3715 + bool "HP iPAQ rx3715" + select S3C2440_XTAL_16934400 + select PM_H1940 if PM + select S3C_DEV_NAND + help + Say Y here if you are using the HP iPAQ rx3715. + +config ARCH_S3C2440 + bool "SMDK2440" + select S3C2440_XTAL_16934400 + select S3C24XX_SMDK + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the SMDK2440. + +config SMDK2440_CPU2440 + bool "SMDK2440 with S3C2440 CPU module" + default y if ARCH_S3C2440 + select S3C2440_XTAL_16934400 + +endif # CPU_S3C2440 + +if CPU_S3C2442 + +comment "S3C2442 Boards" + +# +# The "S3C2442 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_NEO1973_GTA02 + bool "Openmoko GTA02 / Freerunner phone" + select MFD_PCF50633 + select PCF50633_GPIO + select I2C + select POWER_SUPPLY + select MACH_NEO1973 + select S3C2410_PWM + select S3C_DEV_USB_HOST + help + Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone + +config MACH_RX1950 + bool "HP iPAQ rx1950" + select S3C24XX_DCLK + select PM_H1940 if PM + select I2C + select S3C2410_PWM + select S3C_DEV_NAND + select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2440_XTAL_16934400 + help + Say Y here if you're using HP iPAQ rx1950 + +config SMDK2440_CPU2442 + bool "SMDM2440 with S3C2442 CPU module" + +endif # CPU_S3C2440 + +if CPU_S3C2443 || CPU_S3C2416 + +config S3C2443_COMMON + bool + help + Common code for the S3C2443 and similar processors, which includes + the S3C2416 and S3C2450. + +config S3C2443_DMA + bool + help + Internal config node for S3C2443 DMA support + +endif # CPU_S3C2443 || CPU_S3C2416 + +if CPU_S3C2443 + +comment "S3C2443 Boards" + +config MACH_SMDK2443 + bool "SMDK2443" + select S3C24XX_SMDK + select S3C_DEV_HSMMC1 + help + Say Y here if you are using an SMDK2443 + +endif # CPU_S3C2443 + +endmenu # SAMSUNG S3C24XX SoCs Support + +endif # ARCH_S3C24XX diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile new file mode 100644 index 000000000000..3518fe812d5f --- /dev/null +++ b/arch/arm/mach-s3c24xx/Makefile @@ -0,0 +1,95 @@ +# arch/arm/mach-s3c24xx/Makefile +# +# Copyright (c) 2012 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# core + +obj-$(CONFIG_CPU_S3C2410) += s3c2410.o +obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o +obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o + +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o +obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o +obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o +obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o + +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o +obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o + +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o + +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o + +# common code + +obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o +obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o + +# +# machine support +# following is ordered alphabetically by option text. +# + +obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o +obj-$(CONFIG_ARCH_BAST) += mach-bast.o +obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +obj-$(CONFIG_ARCH_H1940) += mach-h1940.o +obj-$(CONFIG_H1940BT) += h1940-bluetooth.o +obj-$(CONFIG_PM_H1940) += pm-h1940.o +obj-$(CONFIG_MACH_N30) += mach-n30.o +obj-$(CONFIG_MACH_OTOM) += mach-otom.o +obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o +obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o +obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o +obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o + +obj-$(CONFIG_MACH_JIVE) += mach-jive.o +obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o +obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o + +obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o + +obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o +obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o +obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o +obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o +obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o +obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o +obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o + +obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o +obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o + +obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o + +# common bits of machine support + +obj-$(CONFIG_S3C24XX_SMDK) += common-smdk.o +obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o +obj-$(CONFIG_S3C24XX_SIMTEC_NOR) += simtec-nor.o +obj-$(CONFIG_S3C24XX_SIMTEC_PM) += simtec-pm.o +obj-$(CONFIG_S3C24XX_SIMTEC_USB) += simtec-usb.o + +# machine additions + +obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o +obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o + +# device setup + +obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o +obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o diff --git a/arch/arm/mach-s3c2410/Makefile.boot b/arch/arm/mach-s3c24xx/Makefile.boot index 4457605ba04a..4457605ba04a 100644 --- a/arch/arm/mach-s3c2410/Makefile.boot +++ b/arch/arm/mach-s3c24xx/Makefile.boot diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c index 298ececfa366..298ececfa366 100644 --- a/arch/arm/mach-s3c2410/bast-ide.c +++ b/arch/arm/mach-s3c24xx/bast-ide.c diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c index ac7b2ad5c405..ac7b2ad5c405 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c24xx/bast-irq.c diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index d10b695a9066..d10b695a9066 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c index 59f54d1d7f8b..dbc9ab4aaca2 100644 --- a/arch/arm/mach-s3c2416/clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c @@ -15,7 +15,6 @@ #include <linux/clk.h> #include <plat/s3c2416.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> @@ -132,12 +131,6 @@ static struct clk hsmmc0_clk = { .ctrlbit = S3C2416_HCLKCON_HSMMC0, }; -void __init_or_cpufreq s3c2416_setup_clocks(void) -{ - s3c2443_common_setup_clocks(s3c2416_get_pll); -} - - static struct clksrc_clk *clksrcs[] __initdata = { &hsspi_eplldiv, &hsspi_mux, diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 414364eb426c..414364eb426c 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index 6dde2696f8f0..efb3ac359566 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -179,11 +179,6 @@ static struct clk *clks[] __initdata = { &clk_hsmmc, }; -void __init_or_cpufreq s3c2443_setup_clocks(void) -{ - s3c2443_common_setup_clocks(s3c2443_get_mpll); -} - void __init s3c2443_init_clocks(int xtal) { unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); @@ -196,8 +191,6 @@ void __init s3c2443_init_clocks(int xtal) armdiv, ARRAY_SIZE(armdiv), S3C2443_CLKDIV0_ARMDIV_MASK); - s3c2443_setup_clocks(); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c index 6d9b688c442b..6d9b688c442b 100644 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c244x.c diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index 95e68190d593..460431589f39 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -1,9 +1,18 @@ -/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c +/* + * Common code for SoCs starting with the S3C2443 * * Copyright (c) 2007, 2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2443 Clock control suport - common code + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #include <linux/init.h> @@ -12,7 +21,6 @@ #include <mach/regs-s3c2443-clock.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> @@ -53,7 +61,7 @@ int s3c2443_clkcon_enable_s(struct clk *clk, int enable) * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as * such directly equating the two source clocks is impossible. */ -struct clk clk_mpllref = { +static struct clk clk_mpllref = { .name = "mpllref", .parent = &clk_xtal, }; @@ -160,6 +168,44 @@ static struct clk clk_prediv = { }, }; +/* hclk divider + * + * divides the prediv and provides the hclk. + */ + +static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + + clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; + + return rate / (clkdiv0 + 1); +} + +static struct clk_ops clk_h_ops = { + .get_rate = s3c2443_hclkdiv_getrate, +}; + +/* pclk divider + * + * divides the hclk and provides the pclk. + */ + +static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + + clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0); + + return rate / (clkdiv0 + 1); +} + +static struct clk_ops clk_p_ops = { + .get_rate = s3c2443_pclkdiv_getrate, +}; + /* armdiv * * this clock is sourced from msysclk and can have a number of @@ -516,26 +562,15 @@ static struct clk hsmmc1_clk = { .ctrlbit = S3C2443_HCLKCON_HSMMC, }; -static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) -{ - clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return clkcon0 + 1; -} - /* EPLLCON compatible enough to get on/off information */ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) { unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); struct clk *xtal_clk; unsigned long xtal; unsigned long pll; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; int ptr; xtal_clk = clk_get(NULL, "xtal"); @@ -544,18 +579,13 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) pll = get_mpll(mpllcon, xtal); clk_msysclk.clk.rate = pll; - - fclk = clk_get_rate(&clk_armdiv); - hclk = s3c2443_prediv_getrate(&clk_prediv); - hclk /= s3c2443_get_hdiv(clkdiv0); - pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); - - s3c24xx_setup_clocks(fclk, hclk, pclk); + clk_mpll.rate = pll; printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(pll), print_mhz(fclk), - print_mhz(hclk), print_mhz(pclk)); + (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on", + print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)), + print_mhz(clk_get_rate(&clk_h)), + print_mhz(clk_get_rate(&clk_p))); for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) s3c_set_clksrc(&clksrc_clks[ptr], true); @@ -568,7 +598,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) } printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", + (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on", print_mhz(clk_get_rate(&clk_epll)), print_mhz(clk_get_rate(&clk_usb_bus))); } @@ -611,9 +641,13 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, nr_armdiv = nr_divs; armdivmask = divmask; - /* s3c2443 parents h and p clocks from prediv */ + /* s3c2443 parents h clock from prediv */ clk_h.parent = &clk_prediv; - clk_p.parent = &clk_prediv; + clk_h.ops = &clk_h_ops; + + /* and p clock from h clock */ + clk_p.parent = &clk_h; + clk_p.ops = &clk_p_ops; clk_usb_bus.parent = &clk_usb_bus_host.clk; clk_epll.parent = &clk_epllref.clk; diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 084604be6ad1..084604be6ad1 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 4803338cf56e..4803338cf56e 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index 38472ac920ff..38472ac920ff 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index 5f0a0c8ef84f..5f0a0c8ef84f 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 14224517e621..e227c472a40a 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -51,7 +51,7 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { .name = "xdreq1", .channels = MAP(S3C2443_DMAREQSEL_XDREQ1), }, - [DMACH_SDI] = { + [DMACH_SDI] = { /* only on S3C2443 */ .name = "sdi", .channels = MAP(S3C2443_DMAREQSEL_SDI), }, @@ -59,7 +59,7 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { .name = "spi0", .channels = MAP(S3C2443_DMAREQSEL_SPI0TX), }, - [DMACH_SPI1] = { + [DMACH_SPI1] = { /* only on S3C2443/S3C2450 */ .name = "spi1", .channels = MAP(S3C2443_DMAREQSEL_SPI1TX), }, @@ -71,11 +71,11 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_0), }, - [DMACH_UART2] = { + [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_0), }, - [DMACH_UART3] = { + [DMACH_UART3] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_0), }, @@ -87,11 +87,11 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_1), }, - [DMACH_UART2_SRC2] = { + [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_1), }, - [DMACH_UART3_SRC2] = { + [DMACH_UART3_SRC2] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_1), }, @@ -142,6 +142,23 @@ static int __init s3c2443_dma_add(struct device *dev, return s3c24xx_dma_init_map(&s3c2443_dma_sel); } +#ifdef CONFIG_CPU_S3C2416 +/* S3C2416 DMA contains the same selection table as the S3C2443 */ +static struct subsys_interface s3c2416_dma_interface = { + .name = "s3c2416_dma", + .subsys = &s3c2416_subsys, + .add_dev = s3c2443_dma_add, +}; + +static int __init s3c2416_dma_init(void) +{ + return subsys_interface_register(&s3c2416_dma_interface); +} + +arch_initcall(s3c2416_dma_init); +#endif + +#ifdef CONFIG_CPU_S3C2443 static struct subsys_interface s3c2443_dma_interface = { .name = "s3c2443_dma", .subsys = &s3c2443_subsys, @@ -154,3 +171,4 @@ static int __init s3c2443_dma_init(void) } arch_initcall(s3c2443_dma_init); +#endif diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c index a5eeb62ce1c2..a5eeb62ce1c2 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h index 1b614d5a81f3..1b614d5a81f3 100644 --- a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h +++ b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h index a2a328134e34..a2a328134e34 100644 --- a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h +++ b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-map.h b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h index c9deb3a5b2c3..c9deb3a5b2c3 100644 --- a/arch/arm/mach-s3c2410/include/mach/anubis-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h index bee2a7a932a0..bee2a7a932a0 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h +++ b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h index cac428c42e7f..cac428c42e7f 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h +++ b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h index 6e7dc9d0cf0e..6e7dc9d0cf0e 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/bast-map.h diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h index 4c38b39b741d..4c38b39b741d 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h +++ b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 4135de87d1f7..4135de87d1f7 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index acbdfecd4186..acbdfecd4186 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S index 473b3cd37d9b..7615a14773fa 100644 --- a/arch/arm/mach-s3c2410/include/mach/entry-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S @@ -25,9 +25,6 @@ .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp mov \base, #S3C24XX_VA_IRQ @@ -71,8 +68,3 @@ @@ exit here, Z flag unset if IRQ .endm - - /* currently don't need an disable_fiq macro */ - - .macro disable_fiq - .endm diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h index a957bc8ed44f..a957bc8ed44f 100644 --- a/arch/arm/mach-s3c2410/include/mach/fb.h +++ b/arch/arm/mach-s3c24xx/include/mach/fb.h diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h index c53ad34c6579..c53ad34c6579 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h index 019ea86057f6..019ea86057f6 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h index c410a078622c..c410a078622c 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio.h index 6fac70f3484e..6fac70f3484e 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio.h diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h index 3a56a229cac6..3a56a229cac6 100644 --- a/arch/arm/mach-s3c2440/include/mach/gta02.h +++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h index fc897d3a056c..fc897d3a056c 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c24xx/include/mach/h1940.h index 2aa683c8d3d6..2aa683c8d3d6 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940.h +++ b/arch/arm/mach-s3c24xx/include/mach/h1940.h diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h index aef5631eac58..aef5631eac58 100644 --- a/arch/arm/mach-s3c2410/include/mach/hardware.h +++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h diff --git a/arch/arm/mach-s3c2410/include/mach/idle.h b/arch/arm/mach-s3c24xx/include/mach/idle.h index e9ddd706b16e..e9ddd706b16e 100644 --- a/arch/arm/mach-s3c2410/include/mach/idle.h +++ b/arch/arm/mach-s3c24xx/include/mach/idle.h diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h index 118749f37c4c..118749f37c4c 100644 --- a/arch/arm/mach-s3c2410/include/mach/io.h +++ b/arch/arm/mach-s3c24xx/include/mach/io.h diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index e53b2177319e..e53b2177319e 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h diff --git a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h b/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h index d8a7672519b6..d8a7672519b6 100644 --- a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h index 78ae807f1281..78ae807f1281 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c24xx/include/mach/map.h diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h index e9e36b0abbac..e9e36b0abbac 100644 --- a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h +++ b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c24xx/include/mach/osiris-map.h index 17380f848428..17380f848428 100644 --- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/osiris-map.h diff --git a/arch/arm/mach-s3c2410/include/mach/otom-map.h b/arch/arm/mach-s3c24xx/include/mach/otom-map.h index f9277a52c145..f9277a52c145 100644 --- a/arch/arm/mach-s3c2410/include/mach/otom-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/otom-map.h diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h index 2eef7e6f7675..2eef7e6f7675 100644 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h index 3415b60082d7..3415b60082d7 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h index 98fd4a05587c..98fd4a05587c 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index cac1ad6b582c..cac1ad6b582c 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h index 19575e061114..19575e061114 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c24xx/include/mach/regs-irq.h index 0f07ba30b1fb..0f07ba30b1fb 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-irq.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h index ee8f040aff5f..ee8f040aff5f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h index e0c67b0163d8..e0c67b0163d8 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c24xx/include/mach/regs-power.h index 4932b87bdf3d..4932b87bdf3d 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-power.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-power.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h index fb6352515090..fb6352515090 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h index aa69dc79bc38..aa69dc79bc38 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h index 2f31b74974af..2f31b74974af 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h index e443167efb87..e443167efb87 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h index c3feff3c0488..c3feff3c0488 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h diff --git a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h index cbf2d8884e30..cbf2d8884e30 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h diff --git a/arch/arm/mach-s3c2410/include/mach/tick.h b/arch/arm/mach-s3c24xx/include/mach/tick.h index 544da41979db..544da41979db 100644 --- a/arch/arm/mach-s3c2410/include/mach/tick.h +++ b/arch/arm/mach-s3c24xx/include/mach/tick.h diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h index fe9ca1ffd51b..fe9ca1ffd51b 100644 --- a/arch/arm/mach-s3c2410/include/mach/timex.h +++ b/arch/arm/mach-s3c24xx/include/mach/timex.h diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c24xx/include/mach/uncompress.h index 8b283f847daa..8b283f847daa 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c24xx/include/mach/uncompress.h diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h index e4119913d7c5..e4119913d7c5 100644 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h +++ b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h index 47add133b8ee..47add133b8ee 100644 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h +++ b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h index 99612fcc4eb2..99612fcc4eb2 100644 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c index e65619ddbccc..e65619ddbccc 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c index fd49f35e448e..fd49f35e448e 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2416.c diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c index 4a18cde439cc..4a18cde439cc 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2440.c diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c index ac2829f56d12..ac2829f56d12 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2443.c diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c index 5fe8e58d3afd..5fe8e58d3afd 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c24xx/irq-s3c244x.c diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 4220cc60de3c..4220cc60de3c 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 19b577bc09b8..60c72c54c21e 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -55,6 +55,7 @@ #include <plat/cpu.h> #include <plat/audio-simtec.h> +#include "simtec.h" #include "common.h" #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index d7ae49c90118..d7ae49c90118 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index feeaf73933dc..53219c02eca0 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -64,8 +64,7 @@ #include <plat/gpio-cfg.h> #include <plat/audio-simtec.h> -#include "usb-simtec.h" -#include "nor-simtec.h" +#include "simtec.h" #include "common.h" #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 9a4a5bc008e6..ba5d85394105 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -38,6 +38,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/spi/spi.h> +#include <linux/spi/s3c24xx.h> #include <linux/mmc/host.h> @@ -73,7 +74,6 @@ #include <mach/regs-gpioj.h> #include <mach/fb.h> -#include <mach/spi.h> #include <plat/usb-control.h> #include <mach/regs-mem.h> #include <mach/hardware.h> @@ -258,7 +258,7 @@ static struct pcf50633_bl_platform_data gta02_backlight_data = { .ramp_time = 5, }; -struct pcf50633_platform_data gta02_pcf_pdata = { +static struct pcf50633_platform_data gta02_pcf_pdata = { .resumers = { [0] = PCF50633_INT1_USBINS | PCF50633_INT1_USBREM | @@ -404,7 +404,7 @@ static struct platform_device gta02_nor_flash = { }; -struct platform_device s3c24xx_pwm_device = { +static struct platform_device s3c24xx_pwm_device = { .name = "s3c24xx_pwm", .num_resources = 0, }; diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 41245a603981..6b21ba107eab 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -162,7 +162,7 @@ static int h1940_gpiolib_latch_get(struct gpio_chip *chip, return (latch_state >> (offset + 16)) & 1; } -struct gpio_chip h1940_latch_gpiochip = { +static struct gpio_chip h1940_latch_gpiochip = { .base = H1940_LATCH_GPIO(0), .owner = THIS_MODULE, .label = "H1940_LATCH", @@ -304,7 +304,7 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = { { .volt = 3841, .cur = 0, .level = 0}, }; -int h1940_bat_init(void) +static int h1940_bat_init(void) { int ret; @@ -317,17 +317,17 @@ int h1940_bat_init(void) } -void h1940_bat_exit(void) +static void h1940_bat_exit(void) { gpio_free(H1940_LATCH_SM803_ENABLE); } -void h1940_enable_charger(void) +static void h1940_enable_charger(void) { gpio_set_value(H1940_LATCH_SM803_ENABLE, 1); } -void h1940_disable_charger(void) +static void h1940_disable_charger(void) { gpio_set_value(H1940_LATCH_SM803_ENABLE, 0); } @@ -364,7 +364,7 @@ static struct platform_device h1940_battery = { }, }; -DEFINE_SPINLOCK(h1940_blink_spin); +static DEFINE_SPINLOCK(h1940_blink_spin); int h1940_led_blink_set(unsigned gpio, int state, unsigned long *delay_on, unsigned long *delay_off) diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index ae73ba34ecc6..ae73ba34ecc6 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 5d66fb218a41..5d66fb218a41 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 383d00ca8f60..383d00ca8f60 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 5198e3e1c5be..5198e3e1c5be 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index ad2792dfbee1..ad2792dfbee1 100644 --- a/arch/arm/mach-s3c2440/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index c5daeb612a88..c5daeb612a88 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 5f1e0eeb38a9..5f1e0eeb38a9 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 91c16d9d2459..91c16d9d2459 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 6f68abf44fab..200debb4c72d 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -217,7 +217,7 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = { { .volt = 3820, .cur = 0, .level = 0}, }; -int rx1950_bat_init(void) +static int rx1950_bat_init(void) { int ret; @@ -236,25 +236,25 @@ err_gpio1: return ret; } -void rx1950_bat_exit(void) +static void rx1950_bat_exit(void) { gpio_free(S3C2410_GPJ(2)); gpio_free(S3C2410_GPJ(3)); } -void rx1950_enable_charger(void) +static void rx1950_enable_charger(void) { gpio_direction_output(S3C2410_GPJ(2), 1); gpio_direction_output(S3C2410_GPJ(3), 1); } -void rx1950_disable_charger(void) +static void rx1950_disable_charger(void) { gpio_direction_output(S3C2410_GPJ(2), 0); gpio_direction_output(S3C2410_GPJ(3), 0); } -DEFINE_SPINLOCK(rx1950_blink_spin); +static DEFINE_SPINLOCK(rx1950_blink_spin); static int rx1950_led_blink_set(unsigned gpio, int state, unsigned long *delay_on, unsigned long *delay_off) @@ -382,7 +382,7 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = { static struct pwm_device *lcd_pwm; -void rx1950_lcd_power(int enable) +static void rx1950_lcd_power(int enable) { int i; static int enabled; diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index 56af35447598..56af35447598 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index bdc27e772876..bdc27e772876 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index b11451b853d8..b11451b853d8 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index eebe1e72b93e..30a44f806e01 100644 --- a/arch/arm/mach-s3c2416/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -125,7 +125,7 @@ static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = { } }; -void smdk2416_hsudc_gpio_init(void) +static void smdk2416_hsudc_gpio_init(void) { s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP); s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE); @@ -133,20 +133,20 @@ void smdk2416_hsudc_gpio_init(void) s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0); } -void smdk2416_hsudc_gpio_uninit(void) +static void smdk2416_hsudc_gpio_uninit(void) { s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1); s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0)); } -struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = { +static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = { .epnum = 9, .gpio_init = smdk2416_hsudc_gpio_init, .gpio_uninit = smdk2416_hsudc_gpio_uninit, }; -struct s3c_fb_pd_win smdk2416_fb_win[] = { +static struct s3c_fb_pd_win smdk2416_fb_win[] = { [0] = { /* think this is the same as the smdk6410 */ .win_mode = { diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 83a1036d7dcb..83a1036d7dcb 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 209236956222..209236956222 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 1114666f0efb..1114666f0efb 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index dbe668a803ef..87608d45dac4 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -51,8 +51,7 @@ #include <plat/iic.h> #include <plat/audio-simtec.h> -#include "usb-simtec.h" -#include "nor-simtec.h" +#include "simtec.h" #include "common.h" /* macros for virtual address mods for the io space entries */ diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 94bfaa1fb148..94bfaa1fb148 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S index c93bf2db9f4d..c93bf2db9f4d 100644 --- a/arch/arm/mach-s3c2410/pm-h1940.S +++ b/arch/arm/mach-s3c24xx/pm-h1940.S diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c index 03f706dd6009..03f706dd6009 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index d04588506ec4..d04588506ec4 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c index 1bd4817b8eb8..1bd4817b8eb8 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 061b6bb1a557..a3c5cb086ee2 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -30,6 +30,7 @@ #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <plat/cpu-freq.h> diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index aff6e85a97c6..d4bc7f960bbb 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -31,8 +31,7 @@ #include <mach/hardware.h> #include <asm/proc-fns.h> #include <asm/irq.h> - -#include <mach/idle.h> +#include <asm/system_misc.h> #include <plat/cpu-freq.h> @@ -164,7 +163,7 @@ void __init s3c2412_map_io(void) /* set our idle function */ - s3c24xx_idle = s3c2412_idle; + arm_pm_idle = s3c2412_idle; /* register our io-tables */ diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 5287d2808d3e..7743fade50df 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -43,8 +43,8 @@ #include <mach/hardware.h> #include <asm/proc-fns.h> #include <asm/irq.h> +#include <asm/system_misc.h> -#include <mach/idle.h> #include <mach/regs-s3c2443-clock.h> #include <plat/gpio-core.h> @@ -60,6 +60,7 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> +#include <plat/rtc-core.h> static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -88,8 +89,6 @@ int __init s3c2416_init(void) { printk(KERN_INFO "S3C2416: Initializing architecture\n"); - /* s3c24xx_idle = s3c2416_idle; */ - /* change WDT IRQ number */ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; @@ -101,6 +100,7 @@ int __init s3c2416_init(void) s3c_fb_setname("s3c2443-fb"); s3c_adc_setname("s3c2416-adc"); + s3c_rtc_setname("s3c2416-rtc"); #ifdef CONFIG_PM register_syscore_ops(&s3c2416_pm_syscore_ops); diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c index 2b3dddb49af7..2b3dddb49af7 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c24xx/s3c2440.c diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 22cb7c94a8c8..22cb7c94a8c8 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index b9deaeb0dfff..ab648ad8fa50 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -29,6 +29,7 @@ #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> @@ -41,6 +42,7 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> +#include <plat/rtc-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -73,6 +75,7 @@ int __init s3c2443_init(void) s3c_fb_setname("s3c2443-fb"); s3c_adc_setname("s3c2443-adc"); + s3c_rtc_setname("s3c2443-rtc"); /* change WDT IRQ number */ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index d15852f642b7..6f74118f60c6 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -23,6 +23,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c index 9e90a7cbd1d6..9e90a7cbd1d6 100644 --- a/arch/arm/plat-s3c24xx/setup-i2c.c +++ b/arch/arm/mach-s3c24xx/setup-i2c.c diff --git a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c index f65cb3ef16ce..f65cb3ef16ce 100644 --- a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c +++ b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c diff --git a/arch/arm/plat-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c index ed2638663675..ed2638663675 100644 --- a/arch/arm/plat-s3c24xx/setup-ts.c +++ b/arch/arm/mach-s3c24xx/setup-ts.c diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c index 6bc832e0d8ea..11881c9a38c0 100644 --- a/arch/arm/plat-s3c24xx/simtec-audio.c +++ b/arch/arm/mach-s3c24xx/simtec-audio.c @@ -27,6 +27,8 @@ #include <plat/audio-simtec.h> #include <plat/devs.h> +#include "simtec.h" + /* platform ops for audio */ static void simtec_audio_startup_lrroute(void) diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c24xx/simtec-nor.c index ad9f750f1e55..2119ca6a73bc 100644 --- a/arch/arm/mach-s3c2410/nor-simtec.c +++ b/arch/arm/mach-s3c24xx/simtec-nor.c @@ -30,7 +30,7 @@ #include <mach/bast-map.h> #include <mach/bast-cpld.h> -#include "nor-simtec.h" +#include "simtec.h" static void simtec_nor_vpp(struct platform_device *pdev, int vpp) { diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/mach-s3c24xx/simtec-pm.c index 699f93171297..699f93171297 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/mach-s3c24xx/simtec-pm.c diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c24xx/simtec-usb.c index 29bd3d987bec..d91c1a725139 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -37,7 +37,7 @@ #include <plat/usb-control.h> #include <plat/devs.h> -#include "usb-simtec.h" +#include "simtec.h" /* control power and monitor over-current events on various Simtec * designed boards. diff --git a/arch/arm/mach-s3c2410/nor-simtec.h b/arch/arm/mach-s3c24xx/simtec.h index f619c1e0d0c8..ae8f4f9ad2ee 100644 --- a/arch/arm/mach-s3c2410/nor-simtec.h +++ b/arch/arm/mach-s3c24xx/simtec.h @@ -4,11 +4,18 @@ * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * Simtec NOR mapping + * Simtec common functions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +struct s3c24xx_audio_simtec_pdata; + extern void nor_simtec_init(void); + +extern int usb_simtec_init(void); + +extern int simtec_audio_add(const char *codec_name, bool has_lr_routing, + struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd5b6388a5a5..dd5b6388a5a5 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S index c82418ed714d..c82418ed714d 100644 --- a/arch/arm/mach-s3c2412/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index dd20c66cd700..82c0915729ee 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -83,6 +83,11 @@ config S3C64XX_SETUP_SPI help Common setup code for SPI GPIO configurations +config S3C64XX_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller + # S36400 Macchine support config MACH_SMDK6400 @@ -157,6 +162,7 @@ config MACH_SMDK6410 select S3C64XX_SETUP_IDE select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_KEYPAD + select S3C64XX_SETUP_USB_PHY help Machine support for the Samsung SMDK6410 @@ -256,6 +262,7 @@ config MACH_SMARTQ select S3C_DEV_USB_HOST select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_USB_PHY select SAMSUNG_DEV_ADC select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS @@ -283,6 +290,7 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_KEYPAD select S3C64XX_SETUP_SPI + select S3C64XX_SETUP_USB_PHY select SAMSUNG_DEV_ADC select SAMSUNG_DEV_KEYPAD select S3C_DEV_USB_HOST @@ -296,5 +304,6 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_DEV_SPI0 select SAMSUNG_GPIO_EXTRA128 select I2C + select LEDS_GPIO_REGISTER help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 1822ac2eba31..f9ce1dc28ce4 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_CPU_S3C6410) += s3c6410.o # PM obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o # DMA support @@ -42,6 +43,7 @@ obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o +obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o # Machine support diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index aebbcc291b4e..52f079a691cb 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -207,6 +207,15 @@ static struct clk init_clocks_off[] = { .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, }, { + .name = "ac97", + .parent = &clk_p, + .ctrlbit = S3C_CLKCON_PCLK_AC97, + }, { + .name = "cfcon", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_IHOST, + }, { .name = "dma0", .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, @@ -216,6 +225,107 @@ static struct clk init_clocks_off[] = { .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_DMA1, + }, { + .name = "3dse", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_3DSE, + }, { + .name = "hclk_secur", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SECUR, + }, { + .name = "sdma1", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SDMA1, + }, { + .name = "sdma0", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SDMA0, + }, { + .name = "hclk_jpeg", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_JPEG, + }, { + .name = "camif", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_CAMIF, + }, { + .name = "hclk_scaler", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SCALER, + }, { + .name = "2d", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_2D, + }, { + .name = "tv", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_TV, + }, { + .name = "post0", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_POST0, + }, { + .name = "rot", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_ROT, + }, { + .name = "hclk_mfc", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_MFC, + }, { + .name = "pclk_mfc", + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_MFC, + }, { + .name = "dac27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_DAC27, + }, { + .name = "tv27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_TV27, + }, { + .name = "scaler27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SCALER27, + }, { + .name = "sclk_scaler", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SCALER, + }, { + .name = "post0_27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_POST0_27, + }, { + .name = "secur", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SECUR, + }, { + .name = "sclk_mfc", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_MFC, + }, { + .name = "cam", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_CAM, + }, { + .name = "sclk_jpeg", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_JPEG, }, }; @@ -289,16 +399,7 @@ static struct clk init_clocks[] = { .name = "watchdog", .parent = &clk_p, .ctrlbit = S3C_CLKCON_PCLK_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_AC97, - }, { - .name = "cfcon", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_IHOST, - } + }, }; static struct clk clk_hsmmc0 = { diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index bee7dcd4df7c..b313380342a5 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -29,6 +29,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/hardware/vic.h> +#include <asm/system_misc.h> #include <mach/map.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index 5eb9c9a7d73b..7a10be629aba 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -25,8 +25,6 @@ void s3c64xx_setup_clocks(void); void s3c64xx_restart(char mode, const char *cmd); -extern struct syscore_ops s3c64xx_irq_syscore_ops; - #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c new file mode 100644 index 000000000000..179460f38db7 --- /dev/null +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -0,0 +1,91 @@ +/* linux/arch/arm/mach-s3c64xx/cpuidle.c + * + * Copyright (c) 2011 Wolfson Microelectronics, plc + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/cpuidle.h> +#include <linux/io.h> +#include <linux/export.h> +#include <linux/time.h> + +#include <asm/proc-fns.h> + +#include <mach/map.h> + +#include <mach/regs-sys.h> +#include <mach/regs-syscon-power.h> + +static int s3c64xx_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct timeval before, after; + unsigned long tmp; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + /* Setup PWRCFG to enter idle mode */ + tmp = __raw_readl(S3C64XX_PWR_CFG); + tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK; + tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE; + __raw_writel(tmp, S3C64XX_PWR_CFG); + + cpu_do_idle(); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + + dev->last_residency = idle_time; + return index; +} + +static struct cpuidle_state s3c64xx_cpuidle_set[] = { + [0] = { + .enter = s3c64xx_enter_idle, + .exit_latency = 1, + .target_residency = 1, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IDLE", + .desc = "System active, ARM gated", + }, +}; + +static struct cpuidle_driver s3c64xx_cpuidle_driver = { + .name = "s3c64xx_cpuidle", + .owner = THIS_MODULE, + .state_count = ARRAY_SIZE(s3c64xx_cpuidle_set), +}; + +static struct cpuidle_device s3c64xx_cpuidle_device = { + .state_count = ARRAY_SIZE(s3c64xx_cpuidle_set), +}; + +static int __init s3c64xx_init_cpuidle(void) +{ + int ret; + + memcpy(s3c64xx_cpuidle_driver.states, s3c64xx_cpuidle_set, + sizeof(s3c64xx_cpuidle_set)); + cpuidle_register_driver(&s3c64xx_cpuidle_driver); + + ret = cpuidle_register_device(&s3c64xx_cpuidle_device); + if (ret) { + pr_err("Failed to register cpuidle device: %d\n", ret); + return ret; + } + + return 0; +} +device_initcall(s3c64xx_init_cpuidle); diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S deleted file mode 100644 index dc2bc15142ce..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S +++ /dev/null @@ -1,19 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/entry-macro.S - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Low-level IRQ helper macros for the Samsung S3C64XX series - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h deleted file mode 100644 index 353ed4389ae7..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/system.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - system implementation - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index 8bec61e242c7..0c7e1d960ca4 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -96,7 +96,7 @@ static void s3c64xx_irq_pm_resume(void) S3C_PMDBG("%s: IRQ configuration restored\n", __func__); } -struct syscore_ops s3c64xx_irq_syscore_ops = { +static struct syscore_ops s3c64xx_irq_syscore_ops = { .suspend = s3c64xx_irq_pm_suspend, .resume = s3c64xx_irq_pm_resume, }; diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index cd3c97e2ee75..0ace108c3e3d 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -11,18 +11,38 @@ #include <linux/export.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/spi/spi.h> #include <linux/mfd/wm831x/irq.h> #include <linux/mfd/wm831x/gpio.h> #include <linux/mfd/wm8994/pdata.h> +#include <linux/regulator/machine.h> + #include <sound/wm5100.h> #include <sound/wm8996.h> #include <sound/wm8962.h> #include <sound/wm9081.h> +#include <plat/s3c64xx-spi.h> + #include <mach/crag6410.h> +static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { + .set_level = gpio_set_value, + .line = S3C64XX_GPC(3), +}; + +static struct spi_board_info wm1253_devs[] = { + [0] = { + .modalias = "wm0010", + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .controller_data = &wm0010_spi_csinfo, + }, +}; + static struct wm5100_pdata wm5100_pdata = { .ldo_ena = S3C64XX_GPN(7), .irq_flags = IRQF_TRIGGER_HIGH, @@ -102,6 +122,7 @@ static struct wm8962_pdata wm8962_pdata __initdata = { 0x8000 | WM8962_GPIO_FN_DMICDAT, WM8962_GPIO_FN_IRQ, /* Open drain mode */ }, + .in4_dc_measure = true, }; static struct wm9081_pdata wm9081_pdata __initdata = { @@ -134,6 +155,14 @@ static const struct i2c_board_info wm1259_devs[] = { }, }; +static struct regulator_init_data wm8994_ldo1 = { + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data wm8994_ldo2 = { + .supply_regulator = "WALLVDD", +}; + static struct wm8994_pdata wm8994_pdata = { .gpio_base = CODEC_GPIO_BASE, .gpio_defaults = { @@ -141,8 +170,8 @@ static struct wm8994_pdata wm8994_pdata = { }, .irq_base = CODEC_IRQ_BASE, .ldo = { - { .supply = "WALLVDD" }, - { .supply = "WALLVDD" }, + { .init_data = &wm8994_ldo1, }, + { .init_data = &wm8994_ldo2, }, }, }; @@ -158,14 +187,21 @@ static __devinitdata const struct { const char *name; const struct i2c_board_info *i2c_devs; int num_i2c_devs; + const struct spi_board_info *spi_devs; + int num_spi_devs; } gf_mods[] = { { .id = 0x01, .name = "1250-EV1 Springbank" }, { .id = 0x02, .name = "1251-EV1 Jura" }, { .id = 0x03, .name = "1252-EV1 Glenlivet" }, { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x14, .name = "6271-EV1 Lochnagar" }, + { .id = 0x15, .name = "XXXX-EV1 Bells" }, { .id = 0x21, .name = "1275-EV1 Mortlach" }, { .id = 0x25, .name = "1274-EV1 Glencadam" }, - { .id = 0x31, .name = "1253-EV1 Tomatin", }, + { .id = 0x31, .name = "1253-EV1 Tomatin", + .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) }, + { .id = 0x32, .name = "XXXX-EV1 Caol Illa" }, + { .id = 0x33, .name = "XXXX-EV1 Oban" }, { .id = 0x39, .name = "1254-EV1 Dallas Dhu", .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, { .id = 0x3a, .name = "1259-EV1 Tobermory", @@ -197,12 +233,16 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, if (i < ARRAY_SIZE(gf_mods)) { dev_info(&i2c->dev, "%s revision %d\n", gf_mods[i].name, rev + 1); + for (j = 0; j < gf_mods[i].num_i2c_devs; j++) { if (!i2c_new_device(i2c->adapter, &(gf_mods[i].i2c_devs[j]))) dev_err(&i2c->dev, "Failed to register dev: %d\n", ret); } + + spi_register_board_info(gf_mods[i].spi_devs, + gf_mods[i].num_spi_devs); } else { dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n", id, rev + 1); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 8077f650eb0e..e20bf5835365 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -19,7 +19,9 @@ #include <linux/io.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <linux/delay.h> +#include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/pwm_backlight.h> @@ -59,6 +61,7 @@ #include <plat/sdhci.h> #include <plat/gpio-cfg.h> #include <plat/s3c64xx-spi.h> +#include <plat/udc-hs.h> #include <plat/keypad.h> #include <plat/clock.h> @@ -298,6 +301,7 @@ static struct platform_device littlemill_device = { }; static struct regulator_consumer_supply wallvdd_consumers[] = { + REGULATOR_SUPPLY("SPKVDD", "1-001a"), REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), REGULATOR_SUPPLY("SPKVDDL", "1-001a"), @@ -574,11 +578,19 @@ static struct s3c2410_platform_i2c i2c0_pdata = { .frequency = 400000, }; +static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = { + REGULATOR_SUPPLY("DCVDD", "spi0.0"), + REGULATOR_SUPPLY("AVDD", "spi0.0"), +}; + static struct regulator_init_data pvdd_1v2 __initdata = { .constraints = { .name = "PVDD_1V2", - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + + .consumer_supplies = pvdd_1v2_consumers, + .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers), }; static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { @@ -592,6 +604,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { REGULATOR_SUPPLY("AVDD2", "1-001a"), REGULATOR_SUPPLY("DCVDD", "1-001a"), REGULATOR_SUPPLY("AVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD", "spi0.0"), }; static struct regulator_init_data pvdd_1v8 __initdata = { @@ -681,6 +694,7 @@ static void __init crag6410_map_io(void) static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = { .max_width = 4, .cd_type = S3C_SDHCI_CD_PERMANENT, + .host_caps = MMC_CAP_POWER_OFF_CARD, }; static void crag6410_cfg_sdhci0(struct platform_device *dev, int width) @@ -696,8 +710,59 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = { .max_width = 4, .cd_type = S3C_SDHCI_CD_INTERNAL, .cfg_gpio = crag6410_cfg_sdhci0, + .host_caps = MMC_CAP_POWER_OFF_CARD, +}; + +static const struct gpio_led gpio_leds[] = { + { + .name = "d13:green:", + .gpio = MMGPIO_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d14:green:", + .gpio = MMGPIO_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d15:green:", + .gpio = MMGPIO_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d16:green:", + .gpio = MMGPIO_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d17:green:", + .gpio = MMGPIO_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d18:green:", + .gpio = MMGPIO_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d19:green:", + .gpio = MMGPIO_GPIO_BASE + 6, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d20:green:", + .gpio = MMGPIO_GPIO_BASE + 7, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, }; +static const struct gpio_led_platform_data gpio_leds_pdata = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct s3c_hsotg_plat crag6410_hsotg_pdata; + static void __init crag6410_machine_init(void) { /* Open drain IRQs need pullups */ @@ -722,14 +787,18 @@ static void __init crag6410_machine_init(void) s3c_i2c0_set_platdata(&i2c0_pdata); s3c_i2c1_set_platdata(&i2c1_pdata); s3c_fb_set_platdata(&crag6410_lcd_pdata); + s3c_hsotg_set_platdata(&crag6410_hsotg_pdata); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); samsung_keypad_set_platdata(&crag6410_keypad_data); + s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); + gpio_led_register_device(-1, &gpio_leds_pdata); + regulator_has_full_constraints(); s3c64xx_pm_init(); diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index ce31db136231..ce745e19aa27 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -187,6 +187,8 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = { }, }; +static struct s3c_hsotg_plat smartq_hsotg_pdata; + static int __init smartq_lcd_setup_gpio(void) { int ret; @@ -383,6 +385,7 @@ void __init smartq_map_io(void) void __init smartq_machine_init(void) { s3c_i2c0_set_platdata(NULL); + s3c_hsotg_set_platdata(&smartq_hsotg_pdata); s3c_hwmon_set_platdata(&smartq_hwmon_pdata); s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata); s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata); diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ca6fc204f0ea..d55bc96d9582 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -72,6 +72,7 @@ #include <plat/keypad.h> #include <plat/backlight.h> #include <plat/regs-fb-v4.h> +#include <plat/udc-hs.h> #include "common.h" @@ -631,6 +632,8 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = { .pwm_id = 1, }; +static struct s3c_hsotg_plat smdk6410_hsotg_pdata; + static void __init smdk6410_map_io(void) { u32 tmp; @@ -659,6 +662,7 @@ static void __init smdk6410_machine_init(void) s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata); samsung_keypad_set_platdata(&smdk6410_keypad_data); diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c new file mode 100644 index 000000000000..f6757e02d7db --- /dev/null +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <mach/map.h> +#include <mach/regs-sys.h> +#include <plat/cpu.h> +#include <plat/regs-usb-hsotg-phy.h> +#include <plat/usb-phy.h> + +static int s3c_usb_otgphy_init(struct platform_device *pdev) +{ + struct clk *xusbxti; + u32 phyclk; + + writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS); + + /* set clock frequency for PLL */ + phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK; + + xusbxti = clk_get(&pdev->dev, "xusbxti"); + if (xusbxti && !IS_ERR(xusbxti)) { + switch (clk_get_rate(xusbxti)) { + case 12 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_12M; + break; + case 24 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_24M; + break; + default: + case 48 * MHZ: + /* default reference clock */ + break; + } + clk_put(xusbxti); + } + + /* TODO: select external clock/oscillator */ + writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK); + + /* set to normal OTG PHY */ + writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR); + mdelay(1); + + /* reset OTG PHY and Link */ + writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK, + S3C_RSTCON); + udelay(20); /* at-least 10uS */ + writel(0, S3C_RSTCON); + + return 0; +} + +static int s3c_usb_otgphy_exit(struct platform_device *pdev) +{ + writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN | + S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR); + + writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS); + + return 0; +} + +int s5p_usb_phy_init(struct platform_device *pdev, int type) +{ + if (type == S5P_USB_PHY_DEVICE) + return s3c_usb_otgphy_init(pdev); + + return -EINVAL; +} + +int s5p_usb_phy_exit(struct platform_device *pdev, int type) +{ + if (type == S5P_USB_PHY_DEVICE) + return s3c_usb_otgphy_exit(pdev); + + return -EINVAL; +} diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c index 241d0e645c85..57e718957ef3 100644 --- a/arch/arm/mach-s5p64x0/clock.c +++ b/arch/arm/mach-s5p64x0/clock.c @@ -73,7 +73,7 @@ static const u32 clock_table[][3] = { {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, }; -unsigned long s5p64x0_armclk_get_rate(struct clk *clk) +static unsigned long s5p64x0_armclk_get_rate(struct clk *clk) { unsigned long rate = clk_get_rate(clk->parent); u32 clkdiv; @@ -84,7 +84,8 @@ unsigned long s5p64x0_armclk_get_rate(struct clk *clk) return rate / (clkdiv + 1); } -unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate) +static unsigned long s5p64x0_armclk_round_rate(struct clk *clk, + unsigned long rate) { u32 iter; @@ -96,7 +97,7 @@ unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate) return clock_table[ARRAY_SIZE(clock_table) - 1][0]; } -int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) +static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) { u32 round_tmp; u32 iter; @@ -148,7 +149,7 @@ int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) return 0; } -struct clk_ops s5p64x0_clkarm_ops = { +static struct clk_ops s5p64x0_clkarm_ops = { .get_rate = s5p64x0_armclk_get_rate, .set_rate = s5p64x0_armclk_set_rate, .round_rate = s5p64x0_armclk_round_rate, @@ -173,7 +174,7 @@ struct clksrc_clk clk_dout_mpll = { .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 }, }; -struct clk *clkset_hclk_low_list[] = { +static struct clk *clkset_hclk_low_list[] = { &clk_mout_apll.clk, &clk_mout_mpll.clk, }; diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 52b89a376447..6e6a0a9d6778 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -27,6 +27,7 @@ #include <asm/irq.h> #include <asm/proc-fns.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -146,15 +147,12 @@ static void s5p64x0_idle(void) { unsigned long val; - if (!need_resched()) { - val = __raw_readl(S5P64X0_PWR_CFG); - val &= ~(0x3 << 5); - val |= (0x1 << 5); - __raw_writel(val, S5P64X0_PWR_CFG); + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); - cpu_do_idle(); - } - local_irq_enable(); + cpu_do_idle(); } /* @@ -286,7 +284,7 @@ int __init s5p64x0_init(void) printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); /* set idle function */ - pm_idle = s5p64x0_idle; + arm_pm_idle = s5p64x0_idle; return device_register(&s5p64x0_dev); } diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index f820c0744405..2ee5dc069b37 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -38,7 +38,7 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -u8 s5p6440_pdma_peri[] = { +static u8 s5p6440_pdma_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -63,12 +63,12 @@ u8 s5p6440_pdma_peri[] = { DMACH_SPI1_RX, }; -struct dma_pl330_platdata s5p6440_pdma_pdata = { +static struct dma_pl330_platdata s5p6440_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), .peri_id = s5p6440_pdma_peri, }; -u8 s5p6450_pdma_peri[] = { +static u8 s5p6450_pdma_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -103,39 +103,27 @@ u8 s5p6450_pdma_peri[] = { DMACH_UART5_TX, }; -struct dma_pl330_platdata s5p6450_pdma_pdata = { +static struct dma_pl330_platdata s5p6450_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), .peri_id = s5p6450_pdma_peri, }; -struct amba_device s5p64x0_device_pdma = { - .dev = { - .init_name = "dma-pl330", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .res = { - .start = S5P64X0_PA_PDMA, - .end = S5P64X0_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, + S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL); static int __init s5p64x0_dma_init(void) { if (soc_is_s5p6450()) { dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); - s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; + s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata; } else { dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); - s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; + s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata; } - amba_device_register(&s5p64x0_device_pdma, &iomem_resource); + amba_device_register(&s5p64x0_pdma_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S deleted file mode 100644 index fbb246d0a3df..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Low-level IRQ helper macros for the Samsung S5P64X0 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h index ff85b4b6e8d9..0ef47d1b7670 100644 --- a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h +++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h @@ -22,16 +22,9 @@ extern struct clksrc_clk clk_mout_epll; extern int s5p64x0_epll_enable(struct clk *clk, int enable); extern unsigned long s5p64x0_epll_get_rate(struct clk *clk); -extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk); -extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate); -extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate); - -extern struct clk_ops s5p64x0_clkarm_ops; - extern struct clksrc_clk clk_armclk; extern struct clksrc_clk clk_dout_mpll; -extern struct clk *clkset_hclk_low_list[]; extern struct clksrc_sources clkset_hclk_low; extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable); diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h deleted file mode 100644 index cf26e0954a2f..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/system.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index 247194dd366c..16eca4ea2010 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -170,7 +170,7 @@ static struct clk *clk_src_mout_am_list[] = { [1] = &clk_div_apll2.clk, }; -struct clksrc_sources clk_src_mout_am = { +static struct clksrc_sources clk_src_mout_am = { .sources = clk_src_mout_am_list, .nr_sources = ARRAY_SIZE(clk_src_mout_am_list), }; @@ -212,7 +212,7 @@ static struct clk *clk_src_mout_onenand_list[] = { [1] = &clk_div_d1_bus.clk, }; -struct clksrc_sources clk_src_mout_onenand = { +static struct clksrc_sources clk_src_mout_onenand = { .sources = clk_src_mout_onenand_list, .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list), }; @@ -756,7 +756,7 @@ static struct clk *clk_src_group1_list[] = { [3] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group1 = { +static struct clksrc_sources clk_src_group1 = { .sources = clk_src_group1_list, .nr_sources = ARRAY_SIZE(clk_src_group1_list), }; @@ -766,7 +766,7 @@ static struct clk *clk_src_group2_list[] = { [1] = &clk_div_mpll.clk, }; -struct clksrc_sources clk_src_group2 = { +static struct clksrc_sources clk_src_group2 = { .sources = clk_src_group2_list, .nr_sources = ARRAY_SIZE(clk_src_group2_list), }; @@ -780,7 +780,7 @@ static struct clk *clk_src_group3_list[] = { [5] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group3 = { +static struct clksrc_sources clk_src_group3 = { .sources = clk_src_group3_list, .nr_sources = ARRAY_SIZE(clk_src_group3_list), }; @@ -806,7 +806,7 @@ static struct clk *clk_src_group4_list[] = { [5] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group4 = { +static struct clksrc_sources clk_src_group4 = { .sources = clk_src_group4_list, .nr_sources = ARRAY_SIZE(clk_src_group4_list), }; @@ -831,7 +831,7 @@ static struct clk *clk_src_group5_list[] = { [4] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_group5 = { +static struct clksrc_sources clk_src_group5 = { .sources = clk_src_group5_list, .nr_sources = ARRAY_SIZE(clk_src_group5_list), }; @@ -854,7 +854,7 @@ static struct clk *clk_src_group6_list[] = { [2] = &clk_div_hdmi.clk, }; -struct clksrc_sources clk_src_group6 = { +static struct clksrc_sources clk_src_group6 = { .sources = clk_src_group6_list, .nr_sources = ARRAY_SIZE(clk_src_group6_list), }; @@ -866,7 +866,7 @@ static struct clk *clk_src_group7_list[] = { [3] = &clk_vclk54m, }; -struct clksrc_sources clk_src_group7 = { +static struct clksrc_sources clk_src_group7 = { .sources = clk_src_group7_list, .nr_sources = ARRAY_SIZE(clk_src_group7_list), }; @@ -877,7 +877,7 @@ static struct clk *clk_src_mmc0_list[] = { [2] = &clk_fin_epll, }; -struct clksrc_sources clk_src_mmc0 = { +static struct clksrc_sources clk_src_mmc0 = { .sources = clk_src_mmc0_list, .nr_sources = ARRAY_SIZE(clk_src_mmc0_list), }; @@ -889,7 +889,7 @@ static struct clk *clk_src_mmc12_list[] = { [3] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_mmc12 = { +static struct clksrc_sources clk_src_mmc12 = { .sources = clk_src_mmc12_list, .nr_sources = ARRAY_SIZE(clk_src_mmc12_list), }; @@ -901,7 +901,7 @@ static struct clk *clk_src_irda_usb_list[] = { [3] = &clk_mout_hpll.clk, }; -struct clksrc_sources clk_src_irda_usb = { +static struct clksrc_sources clk_src_irda_usb = { .sources = clk_src_irda_usb_list, .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list), }; @@ -912,7 +912,7 @@ static struct clk *clk_src_pwi_list[] = { [2] = &clk_div_mpll.clk, }; -struct clksrc_sources clk_src_pwi = { +static struct clksrc_sources clk_src_pwi = { .sources = clk_src_pwi_list, .nr_sources = ARRAY_SIZE(clk_src_pwi_list), }; @@ -923,7 +923,7 @@ static struct clk *clk_sclk_spdif_list[] = { [2] = &clk_sclk_audio2.clk, }; -struct clksrc_sources clk_src_sclk_spdif = { +static struct clksrc_sources clk_src_sclk_spdif = { .sources = clk_sclk_spdif_list, .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list), }; diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index c9095730a7f5..621908658861 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -27,6 +27,7 @@ #include <asm/irq.h> #include <asm/proc-fns.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -129,14 +130,6 @@ static struct map_desc s5pc100_iodesc[] __initdata = { } }; -static void s5pc100_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - /* * s5pc100_map_io * @@ -210,10 +203,6 @@ core_initcall(s5pc100_core_init); int __init s5pc100_init(void) { printk(KERN_INFO "S5PC100: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5pc100_idle; - return device_register(&s5pc100_dev); } diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index c841f4d313f2..afd8db2d5991 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -35,7 +35,7 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -u8 pdma0_peri[] = { +static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -68,28 +68,15 @@ u8 pdma0_peri[] = { DMACH_HSI_TX, }; -struct dma_pl330_platdata s5pc100_pdma0_pdata = { +static struct dma_pl330_platdata s5pc100_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), .peri_id = pdma0_peri, }; -struct amba_device s5pc100_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_pdma0_pdata, - }, - .res = { - .start = S5PC100_PA_PDMA0, - .end = S5PC100_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, + S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata); -u8 pdma1_peri[] = { +static u8 pdma1_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -122,36 +109,23 @@ u8 pdma1_peri[] = { DMACH_MSM_REQ3, }; -struct dma_pl330_platdata s5pc100_pdma1_pdata = { +static struct dma_pl330_platdata s5pc100_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), .peri_id = pdma1_peri, }; -struct amba_device s5pc100_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_pdma1_pdata, - }, - .res = { - .start = S5PC100_PA_PDMA1, - .end = S5PC100_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, + S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata); static int __init s5pc100_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); - amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + amba_device_register(&s5pc100_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); - amba_device_register(&s5pc100_device_pdma1, &iomem_resource); + amba_device_register(&s5pc100_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S index b8c242edfa22..bad0700457db 100644 --- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S @@ -12,14 +12,8 @@ * warranty of any kind, whether express or implied. */ - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp .endm diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h deleted file mode 100644 index afc96c298518..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/system.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - system implementation - * - * Based on mach-s3c6400/include/mach/system.h - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 2cdc42e838b8..29594fc4fdf4 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -65,6 +65,11 @@ config S5PV210_SETUP_SPI help Common setup code for SPI GPIO configurations. +config S5PV210_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller + menu "S5PC110 Machines" config MACH_AQUILA @@ -107,6 +112,7 @@ config MACH_GONI select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI select S5PV210_SETUP_FIMC + select S5PV210_SETUP_USB_PHY help Machine support for Samsung GONI board S5PC110(MCP) is one of package option of S5PV210 @@ -118,6 +124,10 @@ config MACH_SMDKC110 select S3C_DEV_I2C2 select S3C_DEV_RTC select S3C_DEV_WDT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_MFC select SAMSUNG_DEV_IDE select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 @@ -142,6 +152,11 @@ config MACH_SMDKV210 select S3C_DEV_I2C2 select S3C_DEV_RTC select S3C_DEV_WDT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_JPEG + select S5P_DEV_MFC select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_IDE diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 76a121dd52b4..1c4e41998a10 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -39,3 +39,4 @@ obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o obj-$(CONFIG_S5PV210_SETUP_SPI) += setup-spi.o +obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index b9ec0c35379f..09609d50961d 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -340,6 +340,11 @@ static struct clk init_clocks_off[] = { .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 26), }, { + .name = "jpeg", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 28), + }, { .name = "mfc", .devname = "s5p-mfc", .parent = &clk_pclk_psys.clk, diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 9c1bcdcc12c3..4c9e9027df9a 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -142,14 +142,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = { } }; -static void s5pv210_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - void s5pv210_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -247,10 +239,6 @@ core_initcall(s5pv210_core_init); int __init s5pv210_init(void) { printk(KERN_INFO "S5PV210: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5pv210_idle; - return device_register(&s5pv210_dev); } diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index a6113e0267f2..86ce62f66190 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -35,7 +35,7 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -u8 pdma0_peri[] = { +static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -66,28 +66,15 @@ u8 pdma0_peri[] = { DMACH_SPDIF, }; -struct dma_pl330_platdata s5pv210_pdma0_pdata = { +static struct dma_pl330_platdata s5pv210_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), .peri_id = pdma0_peri, }; -struct amba_device s5pv210_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma0_pdata, - }, - .res = { - .start = S5PV210_PA_PDMA0, - .end = S5PV210_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, + S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata); -u8 pdma1_peri[] = { +static u8 pdma1_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, DMACH_UART1_RX, @@ -122,36 +109,23 @@ u8 pdma1_peri[] = { DMACH_PCM2_TX, }; -struct dma_pl330_platdata s5pv210_pdma1_pdata = { +static struct dma_pl330_platdata s5pv210_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), .peri_id = pdma1_peri, }; -struct amba_device s5pv210_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma1_pdata, - }, - .res = { - .start = S5PV210_PA_PDMA1, - .end = S5PV210_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, + S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata); static int __init s5pv210_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); - amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + amba_device_register(&s5pv210_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); - amba_device_register(&s5pv210_device_pdma1, &iomem_resource); + amba_device_register(&s5pv210_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S deleted file mode 100644 index bebca1b5d0b1..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/entry-macro.S +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Low-level IRQ helper macros for the Samsung S5PV210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 89c34b8f73bf..b7c8a1917ffc 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -90,6 +90,8 @@ #define S5PV210_PA_FIMC1 0xFB300000 #define S5PV210_PA_FIMC2 0xFB400000 +#define S5PV210_PA_JPEG 0xFB600000 + #define S5PV210_PA_SDO 0xF9000000 #define S5PV210_PA_VP 0xF9100000 #define S5PV210_PA_MIXER 0xF9200000 @@ -132,6 +134,8 @@ #define S5P_PA_SYSCON S5PV210_PA_SYSCON #define S5P_PA_TIMER S5PV210_PA_TIMER +#define S5P_PA_JPEG S5PV210_PA_JPEG + #define SAMSUNG_PA_ADC S5PV210_PA_ADC #define SAMSUNG_PA_CFCON S5PV210_PA_CFCON #define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h index 26691d39d0f4..cccb1eddaa38 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-sys.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-sys.h @@ -13,7 +13,3 @@ #define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) #define S5PV210_USB_PHY0_EN (1 << 0) #define S5PV210_USB_PHY1_EN (1 << 1) - -/* compatibility defines for s3c-hsotg driver */ -#define S3C64XX_OTHERS S5PV210_USB_PHY_CON -#define S3C64XX_OTHERS_USBMASK S5PV210_USB_PHY0_EN diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h deleted file mode 100644 index bf288ced860a..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 5e734d025a6a..a9ea64e0da0d 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -616,6 +616,7 @@ static struct platform_device *aquila_devices[] __initdata = { &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5p_device_fimc_md, &s5pv210_device_iis0, &wm8994_fixed_voltage0, &wm8994_fixed_voltage1, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index ff9152610439..2cf5ed75f390 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -844,7 +844,7 @@ static struct s5p_fimc_isp_info goni_camera_sensors[] = { }, }; -struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { +static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { .isp_info = goni_camera_sensors, .num_clients = ARRAY_SIZE(goni_camera_sensors), }; diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index b323983b2c54..dfc29236321c 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -31,6 +31,7 @@ #include <plat/iic.h> #include <plat/pm.h> #include <plat/s5p-time.h> +#include <plat/mfc.h> #include "common.h" @@ -94,6 +95,13 @@ static struct platform_device *smdkc110_devices[] __initdata = { &s3c_device_i2c2, &s3c_device_rtc, &s3c_device_wdt, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc_md, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, }; static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = { @@ -117,6 +125,11 @@ static void __init smdkc110_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void __init smdkc110_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init smdkc110_machine_init(void) { s3c_pm_init(); @@ -145,4 +158,5 @@ MACHINE_START(SMDKC110, "SMDKC110") .init_machine = smdkc110_machine_init, .timer = &s5p_timer, .restart = s5pv210_restart, + .reserve = &smdkc110_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index dff9ea7b5bba..91d4ad8bcc73 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -46,6 +46,7 @@ #include <plat/s5p-time.h> #include <plat/backlight.h> #include <plat/regs-fb-v4.h> +#include <plat/mfc.h> #include "common.h" @@ -140,7 +141,7 @@ static struct dm9000_plat_data smdkv210_dm9000_platdata = { .dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 }, }; -struct platform_device smdkv210_dm9000 = { +static struct platform_device smdkv210_dm9000 = { .name = "dm9000", .id = -1, .num_resources = ARRAY_SIZE(smdkv210_dm9000_resources), @@ -223,6 +224,14 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc_md, + &s5p_device_jpeg, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, &s5pv210_device_ac97, &s5pv210_device_iis0, &s5pv210_device_spdif, @@ -282,6 +291,11 @@ static void __init smdkv210_map_io(void) s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } +static void __init smdkv210_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init smdkv210_machine_init(void) { s3c_pm_init(); @@ -319,4 +333,5 @@ MACHINE_START(SMDKV210, "SMDKV210") .init_machine = smdkv210_machine_init, .timer = &s5p_timer, .restart = s5pv210_restart, + .reserve = &smdkv210_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c new file mode 100644 index 000000000000..be39cf4aa91b --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-usb-phy.c @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundationr + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <mach/map.h> +#include <mach/regs-sys.h> +#include <plat/cpu.h> +#include <plat/regs-usb-hsotg-phy.h> +#include <plat/usb-phy.h> + +static int s5pv210_usb_otgphy_init(struct platform_device *pdev) +{ + struct clk *xusbxti; + u32 phyclk; + + writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN, + S5PV210_USB_PHY_CON); + + /* set clock frequency for PLL */ + phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK; + + xusbxti = clk_get(&pdev->dev, "xusbxti"); + if (xusbxti && !IS_ERR(xusbxti)) { + switch (clk_get_rate(xusbxti)) { + case 12 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_12M; + break; + case 24 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_24M; + break; + default: + case 48 * MHZ: + /* default reference clock */ + break; + } + clk_put(xusbxti); + } + + /* TODO: select external clock/oscillator */ + writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK); + + /* set to normal OTG PHY */ + writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR); + mdelay(1); + + /* reset OTG PHY and Link */ + writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK, + S3C_RSTCON); + udelay(20); /* at-least 10uS */ + writel(0, S3C_RSTCON); + + return 0; +} + +static int s5pv210_usb_otgphy_exit(struct platform_device *pdev) +{ + writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN | + S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR); + + writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN, + S5PV210_USB_PHY_CON); + + return 0; +} + +int s5p_usb_phy_init(struct platform_device *pdev, int type) +{ + if (type == S5P_USB_PHY_DEVICE) + return s5pv210_usb_otgphy_init(pdev); + + return -EINVAL; +} + +int s5p_usb_phy_exit(struct platform_device *pdev, int type) +{ + if (type == S5P_USB_PHY_DEVICE) + return s5pv210_usb_otgphy_exit(pdev); + + return -EINVAL; +} diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index ed7408d3216c..60b97ec01676 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o +obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 0c4b76ab4d8e..375d3f779a88 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -15,14 +15,16 @@ #include <linux/errno.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/delay.h> #include <linux/mm.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/pgtable-hwdef.h> @@ -36,17 +38,18 @@ #include <asm/mach/serial_sa1100.h> #include <mach/assabet.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" #define ASSABET_BCR_DB1110 \ - (ASSABET_BCR_SPK_OFF | ASSABET_BCR_QMUTE | \ + (ASSABET_BCR_SPK_OFF | \ ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED | \ ASSABET_BCR_RS232EN | ASSABET_BCR_LCD_12RGB | \ ASSABET_BCR_IRDA_MD0) #define ASSABET_BCR_DB1111 \ - (ASSABET_BCR_SPK_OFF | ASSABET_BCR_QMUTE | \ + (ASSABET_BCR_SPK_OFF | \ ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED | \ ASSABET_BCR_RS232EN | ASSABET_BCR_LCD_12RGB | \ ASSABET_BCR_CF_BUS_OFF | ASSABET_BCR_STEREO_LB | \ @@ -69,31 +72,10 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val) EXPORT_SYMBOL(ASSABET_BCR_frob); -static void assabet_backlight_power(int on) -{ -#ifndef ASSABET_PAL_VIDEO - if (on) - ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON); - else -#endif - ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON); -} - -/* - * Turn on/off the backlight. When turning the backlight on, - * we wait 500us after turning it on so we don't cause the - * supplies to droop when we enable the LCD controller (and - * cause a hard reset.) - */ -static void assabet_lcd_power(int on) +static void assabet_ucb1x00_reset(enum ucb1x00_reset state) { -#ifndef ASSABET_PAL_VIDEO - if (on) { - ASSABET_BCR_set(ASSABET_BCR_LCD_ON); - udelay(500); - } else -#endif - ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); + if (state == UCB_RST_PROBE) + ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); } @@ -152,15 +134,8 @@ static struct flash_platform_data assabet_flash_data = { }; static struct resource assabet_flash_resources[] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), + DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M), }; @@ -199,18 +174,126 @@ static struct irda_platform_data assabet_irda_data = { .set_speed = assabet_irda_set_speed, }; +static struct ucb1x00_plat_data assabet_ucb1x00_data = { + .reset = assabet_ucb1x00_reset, + .gpio_base = -1, +}; + static struct mcp_plat_data assabet_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, + .codec_pdata = &assabet_ucb1x00_data, +}; + +static void assabet_lcd_set_visual(u32 visual) +{ + u_int is_true_color = visual == FB_VISUAL_TRUECOLOR; + + if (machine_is_assabet()) { +#if 1 // phase 4 or newer Assabet's + if (is_true_color) + ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); + else + ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); +#else + // older Assabet's + if (is_true_color) + ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); + else + ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); +#endif + } +} + +#ifndef ASSABET_PAL_VIDEO +static void assabet_lcd_backlight_power(int on) +{ + if (on) + ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON); + else + ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON); +} + +/* + * Turn on/off the backlight. When turning the backlight on, we wait + * 500us after turning it on so we don't cause the supplies to droop + * when we enable the LCD controller (and cause a hard reset.) + */ +static void assabet_lcd_power(int on) +{ + if (on) { + ASSABET_BCR_set(ASSABET_BCR_LCD_ON); + udelay(500); + } else + ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); +} + +/* + * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually + * takes an RGB666 signal, but we provide it with an RGB565 signal + * instead (def_rgb_16). + */ +static struct sa1100fb_mach_info lq039q2ds54_info = { + .pixclock = 171521, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 5, .vsync_len = 1, + .left_margin = 61, .upper_margin = 3, + .right_margin = 9, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + + .backlight_power = assabet_lcd_backlight_power, + .lcd_power = assabet_lcd_power, + .set_visual = assabet_lcd_set_visual, +}; +#else +static void assabet_pal_backlight_power(int on) +{ + ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON); +} + +static void assabet_pal_power(int on) +{ + ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); +} + +static struct sa1100fb_mach_info pal_info = { + .pixclock = 67797, .bpp = 16, + .xres = 640, .yres = 512, + + .hsync_len = 64, .vsync_len = 6, + .left_margin = 125, .upper_margin = 70, + .right_margin = 115, .lower_margin = 36, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), + + .backlight_power = assabet_pal_backlight_power, + .lcd_power = assabet_pal_power, + .set_visual = assabet_lcd_set_visual, }; +#endif + +#ifdef CONFIG_ASSABET_NEPONSET +static struct resource neponset_resources[] = { + DEFINE_RES_MEM(0x10000000, 0x08000000), + DEFINE_RES_MEM(0x18000000, 0x04000000), + DEFINE_RES_MEM(0x40000000, SZ_8K), + DEFINE_RES_IRQ(IRQ_GPIO25), +}; +#endif static void __init assabet_init(void) { /* * Ensure that the power supply is in "high power" mode. */ - GPDR |= GPIO_GPIO16; GPSR = GPIO_GPIO16; + GPDR |= GPIO_GPIO16; /* * Ensure that these pins are set as outputs and are driving @@ -218,8 +301,16 @@ static void __init assabet_init(void) * the WS latch in the CPLD, and we don't float causing * excessive power drain. --rmk */ - GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM; GPCR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM; + GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM; + + /* + * Also set GPIO27 as an output; this is used to clock UART3 + * via the FPGA and as otherwise has no pullups or pulldowns, + * so stop it floating. + */ + GPCR = GPIO_GPIO27; + GPDR |= GPIO_GPIO27; /* * Set up registers for sleep mode. @@ -231,8 +322,7 @@ static void __init assabet_init(void) PPDR |= PPC_TXD3 | PPC_TXD1; PPSR |= PPC_TXD3 | PPC_TXD1; - sa1100fb_lcd_power = assabet_lcd_power; - sa1100fb_backlight_power = assabet_backlight_power; + sa11x0_ppc_configure_mcp(); if (machine_has_neponset()) { /* @@ -246,9 +336,17 @@ static void __init assabet_init(void) #ifndef CONFIG_ASSABET_NEPONSET printk( "Warning: Neponset detected but full support " "hasn't been configured in the kernel\n" ); +#else + platform_device_register_simple("neponset", 0, + neponset_resources, ARRAY_SIZE(neponset_resources)); #endif } +#ifndef ASSABET_PAL_VIDEO + sa11x0_register_lcd(&lq039q2ds54_info); +#else + sa11x0_register_lcd(&pal_video); +#endif sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources, ARRAY_SIZE(assabet_flash_resources)); sa11x0_register_irda(&assabet_irda_data); @@ -412,21 +510,8 @@ static void __init assabet_map_io(void) */ Ser1SDCR0 |= SDCR0_SUS; - if (machine_has_neponset()) { -#ifdef CONFIG_ASSABET_NEPONSET - extern void neponset_map_io(void); - - /* - * We map Neponset registers even if it isn't present since - * many drivers will try to probe their stuff (and fail). - * This is still more friendly than a kernel paging request - * crash. - */ - neponset_map_io(); -#endif - } else { + if (!machine_has_neponset()) sa1100_register_uart_fns(&assabet_port_fns); - } /* * When Neponset is attached, the first UART should be @@ -449,6 +534,7 @@ MACHINE_START(ASSABET, "Intel-Assabet") .atag_offset = 0x100, .fixup = fixup_assabet, .map_io = assabet_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = assabet_init, diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index b07a2c024cb7..e0f0c030258c 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -39,20 +39,27 @@ #include "generic.h" static struct resource sa1111_resources[] = { - [0] = { - .start = BADGE4_SA1111_BASE, - .end = BADGE4_SA1111_BASE + 0x00001fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = BADGE4_IRQ_GPIO_SA1111, - .end = BADGE4_IRQ_GPIO_SA1111, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000), + [1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111), }; +static int badge4_sa1111_enable(void *data, unsigned devid) +{ + if (devid == SA1111_DEVID_USB) + badge4_set_5V(BADGE4_5V_USB, 1); + return 0; +} + +static void badge4_sa1111_disable(void *data, unsigned devid) +{ + if (devid == SA1111_DEVID_USB) + badge4_set_5V(BADGE4_5V_USB, 0); +} + static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .disable_devs = SA1111_DEVID_PS2_MSE, + .enable = badge4_sa1111_enable, + .disable = badge4_sa1111_disable, }; static u64 sa1111_dmamask = 0xffffffffUL; @@ -121,11 +128,8 @@ static struct flash_platform_data badge4_flash_data = { .nr_parts = ARRAY_SIZE(badge4_partitions), }; -static struct resource badge4_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource badge4_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M); static int five_v_on __initdata = 0; @@ -269,11 +273,6 @@ static struct map_desc badge4_io_desc[] __initdata = { .pfn = __phys_to_pfn(0x10000000), .length = 0x00100000, .type = MT_DEVICE - }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(0x48000000), - .length = 0x00100000, - .type = MT_DEVICE } }; @@ -304,6 +303,7 @@ static void __init badge4_map_io(void) MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") .atag_offset = 0x100, .map_io = badge4_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, #ifdef CONFIG_SA1111 diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 11bb6d0b9be3..4a61f60e0502 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -18,7 +18,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <asm/irq.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -30,14 +29,11 @@ #include <mach/cerf.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" static struct resource cerfuart2_resources[] = { - [0] = { - .start = 0x80030000, - .end = 0x8003ffff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(0x80030000, SZ_64K), }; static struct platform_device cerfuart2_device = { @@ -87,11 +83,8 @@ static struct flash_platform_data cerf_flash_data = { .nr_parts = ARRAY_SIZE(cerf_partitions), }; -static struct resource cerf_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource cerf_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); static void __init cerf_init_irq(void) { @@ -128,6 +121,7 @@ static struct mcp_plat_data cerf_mcp_data = { static void __init cerf_init(void) { + sa11x0_ppc_configure_mcp(); platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1); sa11x0_register_mcp(&cerf_mcp_data); @@ -136,6 +130,7 @@ static void __init cerf_init(void) MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") /* Maintainer: support@intrinsyc.com */ .map_io = cerf_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = cerf_init_irq, .timer = &sa1100_timer, .init_machine = cerf_init, diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index dab3c6347a8f..172ebd0ee0a2 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -11,17 +11,29 @@ #include <linux/clk.h> #include <linux/spinlock.h> #include <linux/mutex.h> +#include <linux/io.h> +#include <linux/clkdev.h> #include <mach/hardware.h> -/* - * Very simple clock implementation - we only have one clock to deal with. - */ +struct clkops { + void (*enable)(struct clk *); + void (*disable)(struct clk *); +}; + struct clk { + const struct clkops *ops; unsigned int enabled; }; -static void clk_gpio27_enable(void) +#define DEFINE_CLK(_name, _ops) \ +struct clk clk_##_name = { \ + .ops = _ops, \ + } + +static DEFINE_SPINLOCK(clocks_lock); + +static void clk_gpio27_enable(struct clk *clk) { /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: @@ -32,38 +44,24 @@ static void clk_gpio27_enable(void) TUCR = TUCR_3_6864MHz; } -static void clk_gpio27_disable(void) +static void clk_gpio27_disable(struct clk *clk) { TUCR = 0; GPDR &= ~GPIO_32_768kHz; GAFR &= ~GPIO_32_768kHz; } -static struct clk clk_gpio27; - -static DEFINE_SPINLOCK(clocks_lock); - -struct clk *clk_get(struct device *dev, const char *id) -{ - const char *devname = dev_name(dev); - - return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - int clk_enable(struct clk *clk) { unsigned long flags; - spin_lock_irqsave(&clocks_lock, flags); - if (clk->enabled++ == 0) - clk_gpio27_enable(); - spin_unlock_irqrestore(&clocks_lock, flags); + if (clk) { + spin_lock_irqsave(&clocks_lock, flags); + if (clk->enabled++ == 0) + clk->ops->enable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + } + return 0; } EXPORT_SYMBOL(clk_enable); @@ -72,17 +70,31 @@ void clk_disable(struct clk *clk) { unsigned long flags; - WARN_ON(clk->enabled == 0); - - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->enabled == 0) - clk_gpio27_disable(); - spin_unlock_irqrestore(&clocks_lock, flags); + if (clk) { + WARN_ON(clk->enabled == 0); + spin_lock_irqsave(&clocks_lock, flags); + if (--clk->enabled == 0) + clk->ops->disable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + } } EXPORT_SYMBOL(clk_disable); -unsigned long clk_get_rate(struct clk *clk) +const struct clkops clk_gpio27_ops = { + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; + +static DEFINE_CLK(gpio27, &clk_gpio27_ops); + +static struct clk_lookup sa11xx_clkregs[] = { + CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27), + CLKDEV_INIT("sa1100-rtc", NULL, NULL), +}; + +static int __init sa11xx_clk_init(void) { - return 3686400; + clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); + return 0; } -EXPORT_SYMBOL(clk_get_rate); +core_initcall(sa11xx_clk_init); diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index fd5652118ed1..48885b7efd6b 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -22,15 +22,17 @@ #include <linux/tty.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/timer.h> #include <linux/gpio.h> #include <linux/pda_power.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/page.h> #include <asm/setup.h> #include <mach/collie.h> @@ -44,15 +46,12 @@ #include <asm/mach/sharpsl_param.h> #include <asm/hardware/locomo.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" static struct resource collie_scoop_resources[] = { - [0] = { - .start = 0x40800000, - .end = 0x40800fff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(0x40800000, SZ_4K), }; static struct scoop_config collie_scoop_setup = { @@ -85,10 +84,14 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { .num_devs = 1, }; +static struct ucb1x00_plat_data collie_ucb1x00_data = { + .gpio_base = COLLIE_TC35143_GPIO_BASE, +}; + static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, - .gpio_base = COLLIE_TC35143_GPIO_BASE, + .codec_pdata = &collie_ucb1x00_data, }; /* @@ -221,16 +224,8 @@ device_initcall(collie_uart_init); static struct resource locomo_resources[] = { - [0] = { - .start = 0x40000000, - .end = 0x40001fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIO25, - .end = IRQ_GPIO25, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0x40000000, SZ_8K), + [1] = DEFINE_RES_IRQ(IRQ_GPIO25), }; static struct locomo_platform_data locomo_info = { @@ -303,11 +298,21 @@ static struct flash_platform_data collie_flash_data = { }; static struct resource collie_flash_resources[] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), +}; + +static struct sa1100fb_mach_info collie_lcd_info = { + .pixclock = 171521, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 5, .vsync_len = 1, + .left_margin = 11, .upper_margin = 2, + .right_margin = 30, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), }; static void __init collie_init(void) @@ -341,6 +346,10 @@ static void __init collie_init(void) collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN); collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN); + + sa11x0_ppc_configure_mcp(); + + platform_scoop_config = &collie_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -348,6 +357,7 @@ static void __init collie_init(void) printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); } + sa11x0_register_lcd(&collie_lcd_info); sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); sa11x0_register_mcp(&collie_mcp_data); @@ -383,6 +393,7 @@ static void __init collie_map_io(void) MACHINE_START(COLLIE, "Sharp-Collie") .map_io = collie_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = collie_init, diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c deleted file mode 100644 index ad660350c296..000000000000 --- a/arch/arm/mach-sa1100/dma.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * arch/arm/mach-sa1100/dma.c - * - * Support functions for the SA11x0 internal DMA channels. - * - * Copyright (C) 2000, 2001 by Nicolas Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/errno.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma.h> - - -#undef DEBUG -#ifdef DEBUG -#define DPRINTK( s, arg... ) printk( "dma<%p>: " s, regs , ##arg ) -#else -#define DPRINTK( x... ) -#endif - - -typedef struct { - const char *device_id; /* device name */ - u_long device; /* this channel device, 0 if unused*/ - dma_callback_t callback; /* to call when DMA completes */ - void *data; /* ... with private data ptr */ -} sa1100_dma_t; - -static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS]; - -static DEFINE_SPINLOCK(dma_list_lock); - - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - dma_regs_t *dma_regs = dev_id; - sa1100_dma_t *dma = dma_chan + (((u_int)dma_regs >> 5) & 7); - int status = dma_regs->RdDCSR; - - if (status & (DCSR_ERROR)) { - printk(KERN_CRIT "DMA on \"%s\" caused an error\n", dma->device_id); - dma_regs->ClrDCSR = DCSR_ERROR; - } - - dma_regs->ClrDCSR = status & (DCSR_DONEA | DCSR_DONEB); - if (dma->callback) { - if (status & DCSR_DONEA) - dma->callback(dma->data); - if (status & DCSR_DONEB) - dma->callback(dma->data); - } - return IRQ_HANDLED; -} - - -/** - * sa1100_request_dma - allocate one of the SA11x0's DMA channels - * @device: The SA11x0 peripheral targeted by this request - * @device_id: An ascii name for the claiming device - * @callback: Function to be called when the DMA completes - * @data: A cookie passed back to the callback function - * @dma_regs: Pointer to the location of the allocated channel's identifier - * - * This function will search for a free DMA channel and returns the - * address of the hardware registers for that channel as the channel - * identifier. This identifier is written to the location pointed by - * @dma_regs. The list of possible values for @device are listed into - * arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum. - * - * Note that reading from a port and writing to the same port are - * actually considered as two different streams requiring separate - * DMA registrations. - * - * The @callback function is called from interrupt context when one - * of the two possible DMA buffers in flight has terminated. That - * function has to be small and efficient while posponing more complex - * processing to a lower priority execution context. - * - * If no channels are available, or if the desired @device is already in - * use by another DMA channel, then an error code is returned. This - * function must be called before any other DMA calls. - **/ - -int sa1100_request_dma (dma_device_t device, const char *device_id, - dma_callback_t callback, void *data, - dma_regs_t **dma_regs) -{ - sa1100_dma_t *dma = NULL; - dma_regs_t *regs; - int i, err; - - *dma_regs = NULL; - - err = 0; - spin_lock(&dma_list_lock); - for (i = 0; i < SA1100_DMA_CHANNELS; i++) { - if (dma_chan[i].device == device) { - err = -EBUSY; - break; - } else if (!dma_chan[i].device && !dma) { - dma = &dma_chan[i]; - } - } - if (!err) { - if (dma) - dma->device = device; - else - err = -ENOSR; - } - spin_unlock(&dma_list_lock); - if (err) - return err; - - i = dma - dma_chan; - regs = (dma_regs_t *)&DDAR(i); - err = request_irq(IRQ_DMA0 + i, dma_irq_handler, IRQF_DISABLED, - device_id, regs); - if (err) { - printk(KERN_ERR - "%s: unable to request IRQ %d for %s\n", - __func__, IRQ_DMA0 + i, device_id); - dma->device = 0; - return err; - } - - *dma_regs = regs; - dma->device_id = device_id; - dma->callback = callback; - dma->data = data; - - regs->ClrDCSR = - (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB | - DCSR_IE | DCSR_ERROR | DCSR_RUN); - regs->DDAR = device; - - return 0; -} - - -/** - * sa1100_free_dma - free a SA11x0 DMA channel - * @regs: identifier for the channel to free - * - * This clears all activities on a given DMA channel and releases it - * for future requests. The @regs identifier is provided by a - * successful call to sa1100_request_dma(). - **/ - -void sa1100_free_dma(dma_regs_t *regs) -{ - int i; - - for (i = 0; i < SA1100_DMA_CHANNELS; i++) - if (regs == (dma_regs_t *)&DDAR(i)) - break; - if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __func__); - return; - } - - if (!dma_chan[i].device) { - printk(KERN_ERR "%s: Trying to free free DMA\n", __func__); - return; - } - - regs->ClrDCSR = - (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB | - DCSR_IE | DCSR_ERROR | DCSR_RUN); - free_irq(IRQ_DMA0 + i, regs); - dma_chan[i].device = 0; -} - - -/** - * sa1100_start_dma - submit a data buffer for DMA - * @regs: identifier for the channel to use - * @dma_ptr: buffer physical (or bus) start address - * @size: buffer size - * - * This function hands the given data buffer to the hardware for DMA - * access. If another buffer is already in flight then this buffer - * will be queued so the DMA engine will switch to it automatically - * when the previous one is done. The DMA engine is actually toggling - * between two buffers so at most 2 successful calls can be made before - * one of them terminates and the callback function is called. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - * - * The @size must not be larger than %MAX_DMA_SIZE. If a given buffer - * is larger than that then it's the caller's responsibility to split - * it into smaller chunks and submit them separately. If this is the - * case then a @size of %CUT_DMA_SIZE is recommended to avoid ending - * up with too small chunks. The callback function can be used to chain - * submissions of buffer chunks. - * - * Error return values: - * %-EOVERFLOW: Given buffer size is too big. - * %-EBUSY: Both DMA buffers are already in use. - * %-EAGAIN: Both buffers were busy but one of them just completed - * but the interrupt handler has to execute first. - * - * This function returs 0 on success. - **/ - -int sa1100_start_dma(dma_regs_t *regs, dma_addr_t dma_ptr, u_int size) -{ - unsigned long flags; - u_long status; - int ret; - - if (dma_ptr & 3) - printk(KERN_WARNING "DMA: unaligned start address (0x%08lx)\n", - (unsigned long)dma_ptr); - - if (size > MAX_DMA_SIZE) - return -EOVERFLOW; - - local_irq_save(flags); - status = regs->RdDCSR; - - /* If both DMA buffers are started, there's nothing else we can do. */ - if ((status & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) { - DPRINTK("start: st %#x busy\n", status); - ret = -EBUSY; - goto out; - } - - if (((status & DCSR_BIU) && (status & DCSR_STRTB)) || - (!(status & DCSR_BIU) && !(status & DCSR_STRTA))) { - if (status & DCSR_DONEA) { - /* give a chance for the interrupt to be processed */ - ret = -EAGAIN; - goto out; - } - regs->DBSA = dma_ptr; - regs->DBTA = size; - regs->SetDCSR = DCSR_STRTA | DCSR_IE | DCSR_RUN; - DPRINTK("start a=%#x s=%d on A\n", dma_ptr, size); - } else { - if (status & DCSR_DONEB) { - /* give a chance for the interrupt to be processed */ - ret = -EAGAIN; - goto out; - } - regs->DBSB = dma_ptr; - regs->DBTB = size; - regs->SetDCSR = DCSR_STRTB | DCSR_IE | DCSR_RUN; - DPRINTK("start a=%#x s=%d on B\n", dma_ptr, size); - } - ret = 0; - -out: - local_irq_restore(flags); - return ret; -} - - -/** - * sa1100_get_dma_pos - return current DMA position - * @regs: identifier for the channel to use - * - * This function returns the current physical (or bus) address for the - * given DMA channel. If the channel is running i.e. not in a stopped - * state then the caller must disable interrupts prior calling this - * function and process the returned value before re-enabling them to - * prevent races with the completion interrupt handler and the callback - * function. The validation of the returned value is the caller's - * responsibility as well -- the hardware seems to return out of range - * values when the DMA engine completes a buffer. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs) -{ - int status; - - /* - * We must determine whether buffer A or B is active. - * Two possibilities: either we are in the middle of - * a buffer, or the DMA controller just switched to the - * next toggle but the interrupt hasn't been serviced yet. - * The former case is straight forward. In the later case, - * we'll do like if DMA is just at the end of the previous - * toggle since all registers haven't been reset yet. - * This goes around the edge case and since we're always - * a little behind anyways it shouldn't make a big difference. - * If DMA has been stopped prior calling this then the - * position is exact. - */ - status = regs->RdDCSR; - if ((!(status & DCSR_BIU) && (status & DCSR_STRTA)) || - ( (status & DCSR_BIU) && !(status & DCSR_STRTB))) - return regs->DBSA; - else - return regs->DBSB; -} - - -/** - * sa1100_reset_dma - reset a DMA channel - * @regs: identifier for the channel to use - * - * This function resets and reconfigure the given DMA channel. This is - * particularly useful after a sleep/wakeup event. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -void sa1100_reset_dma(dma_regs_t *regs) -{ - int i; - - for (i = 0; i < SA1100_DMA_CHANNELS; i++) - if (regs == (dma_regs_t *)&DDAR(i)) - break; - if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __func__); - return; - } - - regs->ClrDCSR = - (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB | - DCSR_IE | DCSR_ERROR | DCSR_RUN); - regs->DDAR = dma_chan[i].device; -} - - -EXPORT_SYMBOL(sa1100_request_dma); -EXPORT_SYMBOL(sa1100_free_dma); -EXPORT_SYMBOL(sa1100_start_dma); -EXPORT_SYMBOL(sa1100_get_dma_pos); -EXPORT_SYMBOL(sa1100_reset_dma); - diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index bb10ee2cb89f..7c524b4e415d 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -14,17 +14,22 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/pm.h> #include <linux/cpufreq.h> #include <linux/ioport.h> #include <linux/platform_device.h> +#include <video/sa1100fb.h> + #include <asm/div64.h> -#include <mach/hardware.h> -#include <asm/system.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <asm/irq.h> +#include <asm/system_misc.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> #include "generic.h" @@ -149,16 +154,8 @@ static void sa11x0_register_device(struct platform_device *dev, void *data) static struct resource sa11x0udc_resources[] = { - [0] = { - .start = __PREG(Ser0UDCCR), - .end = __PREG(Ser0UDCCR) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser0UDC, - .end = IRQ_Ser0UDC, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser0UDC), }; static u64 sa11x0udc_dma_mask = 0xffffffffUL; @@ -175,16 +172,8 @@ static struct platform_device sa11x0udc_device = { }; static struct resource sa11x0uart1_resources[] = { - [0] = { - .start = __PREG(Ser1UTCR0), - .end = __PREG(Ser1UTCR0) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser1UART, - .end = IRQ_Ser1UART, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser1UART), }; static struct platform_device sa11x0uart1_device = { @@ -195,16 +184,8 @@ static struct platform_device sa11x0uart1_device = { }; static struct resource sa11x0uart3_resources[] = { - [0] = { - .start = __PREG(Ser3UTCR0), - .end = __PREG(Ser3UTCR0) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser3UART, - .end = IRQ_Ser3UART, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser3UART), }; static struct platform_device sa11x0uart3_device = { @@ -215,16 +196,9 @@ static struct platform_device sa11x0uart3_device = { }; static struct resource sa11x0mcp_resources[] = { - [0] = { - .start = __PREG(Ser4MCCR0), - .end = __PREG(Ser4MCCR0) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser4MCP, - .end = IRQ_Ser4MCP, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K), + [1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4), + [2] = DEFINE_RES_IRQ(IRQ_Ser4MCP), }; static u64 sa11x0mcp_dma_mask = 0xffffffffUL; @@ -240,22 +214,24 @@ static struct platform_device sa11x0mcp_device = { .resource = sa11x0mcp_resources, }; +void __init sa11x0_ppc_configure_mcp(void) +{ + /* Setup the PPC unit for the MCP */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); +} + void sa11x0_register_mcp(struct mcp_plat_data *data) { sa11x0_register_device(&sa11x0mcp_device, data); } static struct resource sa11x0ssp_resources[] = { - [0] = { - .start = 0x80070000, - .end = 0x8007ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser4SSP, - .end = IRQ_Ser4SSP, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0x80070000, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser4SSP), }; static u64 sa11x0ssp_dma_mask = 0xffffffffUL; @@ -272,16 +248,8 @@ static struct platform_device sa11x0ssp_device = { }; static struct resource sa11x0fb_resources[] = { - [0] = { - .start = 0xb0100000, - .end = 0xb010ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_LCD, - .end = IRQ_LCD, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0xb0100000, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_LCD), }; static struct platform_device sa11x0fb_device = { @@ -294,6 +262,11 @@ static struct platform_device sa11x0fb_device = { .resource = sa11x0fb_resources, }; +void sa11x0_register_lcd(struct sa1100fb_mach_info *inf) +{ + sa11x0_register_device(&sa11x0fb_device, inf); +} + static struct platform_device sa11x0pcmcia_device = { .name = "sa11x0-pcmcia", .id = -1, @@ -314,23 +287,10 @@ void sa11x0_register_mtd(struct flash_platform_data *flash, } static struct resource sa11x0ir_resources[] = { - { - .start = __PREG(Ser2UTCR0), - .end = __PREG(Ser2UTCR0) + 0x24 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = __PREG(Ser2HSCR0), - .end = __PREG(Ser2HSCR0) + 0x1c - 1, - .flags = IORESOURCE_MEM, - }, { - .start = __PREG(Ser2HSCR2), - .end = __PREG(Ser2HSCR2) + 0x04 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_Ser2ICP, - .end = IRQ_Ser2ICP, - .flags = IORESOURCE_IRQ, - } + DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24), + DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c), + DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04), + DEFINE_RES_IRQ(IRQ_Ser2ICP), }; static struct platform_device sa11x0ir_device = { @@ -345,9 +305,40 @@ void sa11x0_register_irda(struct irda_platform_data *irda) sa11x0_register_device(&sa11x0ir_device, irda); } +static struct resource sa1100_rtc_resources[] = { + DEFINE_RES_MEM(0x90010000, 0x9001003f), + DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"), + DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"), +}; + static struct platform_device sa11x0rtc_device = { .name = "sa1100-rtc", .id = -1, + .num_resources = ARRAY_SIZE(sa1100_rtc_resources), + .resource = sa1100_rtc_resources, +}; + +static struct resource sa11x0dma_resources[] = { + DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE), + DEFINE_RES_IRQ(IRQ_DMA0), + DEFINE_RES_IRQ(IRQ_DMA1), + DEFINE_RES_IRQ(IRQ_DMA2), + DEFINE_RES_IRQ(IRQ_DMA3), + DEFINE_RES_IRQ(IRQ_DMA4), + DEFINE_RES_IRQ(IRQ_DMA5), +}; + +static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device sa11x0dma_device = { + .name = "sa11x0-dma", + .id = -1, + .dev = { + .dma_mask = &sa11x0dma_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(sa11x0dma_resources), + .resource = sa11x0dma_resources, }; static struct platform_device *sa11x0_devices[] __initdata = { @@ -356,8 +347,8 @@ static struct platform_device *sa11x0_devices[] __initdata = { &sa11x0uart3_device, &sa11x0ssp_device, &sa11x0pcmcia_device, - &sa11x0fb_device, &sa11x0rtc_device, + &sa11x0dma_device, }; static int __init sa1100_init(void) @@ -368,12 +359,6 @@ static int __init sa1100_init(void) arch_initcall(sa1100_init); -void (*sa1100fb_backlight_power)(int on); -void (*sa1100fb_lcd_power)(int on); - -EXPORT_SYMBOL(sa1100fb_backlight_power); -EXPORT_SYMBOL(sa1100fb_lcd_power); - /* * Common I/O mapping: @@ -428,7 +413,7 @@ void __init sa1100_map_io(void) * the MBGNT signal false to ensure the SA1111 doesn't own the * SDRAM bus. */ -void __init sa1110_mb_disable(void) +void sa1110_mb_disable(void) { unsigned long flags; @@ -447,7 +432,7 @@ void __init sa1110_mb_disable(void) * If the system is going to use the SA-1111 DMA engines, set up * the memory bus request/grant pins. */ -void __devinit sa1110_mb_enable(void) +void sa1110_mb_enable(void) { unsigned long flags; diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 33268cf6be36..9eb3b3cd5a63 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -16,9 +16,6 @@ extern void sa11x0_restart(char, const char *); mi->bank[__nr].start = (__start), \ mi->bank[__nr].size = (__size) -extern void (*sa1100fb_backlight_power)(int on); -extern void (*sa1100fb_lcd_power)(int on); - extern void sa1110_mb_enable(void); extern void sa1110_mb_disable(void); @@ -39,4 +36,8 @@ struct irda_platform_data; void sa11x0_register_irda(struct irda_platform_data *irda); struct mcp_plat_data; +void sa11x0_ppc_configure_mcp(void); void sa11x0_register_mcp(struct mcp_plat_data *data); + +struct sa1100fb_mach_info; +void sa11x0_register_lcd(struct sa1100fb_mach_info *inf); diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index 1e6b3c105ba6..b2e8d0f418e0 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -14,11 +14,14 @@ #include <linux/kernel.h> #include <linux/gpio.h> +#include <video/sa1100fb.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/irda.h> #include <mach/h3xxx.h> +#include <mach/irqs.h> #include "generic.h" @@ -36,13 +39,28 @@ static void h3100_lcd_power(int enable) } } +static struct sa1100fb_mach_info h3100_lcd_info = { + .pixclock = 406977, .bpp = 4, + .xres = 320, .yres = 240, + + .hsync_len = 26, .vsync_len = 41, + .left_margin = 4, .upper_margin = 0, + .right_margin = 4, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .cmap_greyscale = 1, + .cmap_inverse = 1, + + .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + + .lcd_power = h3100_lcd_power, +}; static void __init h3100_map_io(void) { h3xxx_map_io(); - sa1100fb_lcd_power = h3100_lcd_power; - /* Older bootldrs put GPIO2-9 in alternate mode on the assumption that they are used for video */ GAFR &= ~0x000001fb; @@ -80,12 +98,15 @@ static void __init h3100_mach_init(void) { h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio)); h3xxx_mach_init(); + + sa11x0_register_lcd(&h3100_lcd_info); sa11x0_register_irda(&h3100_irda_data); } MACHINE_START(H3100, "Compaq iPAQ H3100") .atag_offset = 0x100, .map_io = h3100_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3100_mach_init, diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 6b58e7460ecf..cb6659f294fe 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -14,11 +14,14 @@ #include <linux/kernel.h> #include <linux/gpio.h> +#include <video/sa1100fb.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/irda.h> #include <mach/h3xxx.h> +#include <mach/irqs.h> #include "generic.h" @@ -56,11 +59,35 @@ err2: gpio_free(H3XXX_EGPIO_LCD_ON); err1: return; } +static const struct sa1100fb_rgb h3600_rgb_16 = { + .red = { .offset = 12, .length = 4, }, + .green = { .offset = 7, .length = 4, }, + .blue = { .offset = 1, .length = 4, }, + .transp = { .offset = 0, .length = 0, }, +}; + +static struct sa1100fb_mach_info h3600_lcd_info = { + .pixclock = 174757, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 3, .vsync_len = 3, + .left_margin = 12, .upper_margin = 10, + .right_margin = 17, .lower_margin = 1, + + .cmap_static = 1, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + + .rgb[RGB_16] = &h3600_rgb_16, + + .lcd_power = h3600_lcd_power, +}; + + static void __init h3600_map_io(void) { h3xxx_map_io(); - - sa1100fb_lcd_power = h3600_lcd_power; } /* @@ -121,12 +148,15 @@ static void __init h3600_mach_init(void) { h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio)); h3xxx_mach_init(); + + sa11x0_register_lcd(&h3600_lcd_info); sa11x0_register_irda(&h3600_irda_data); } MACHINE_START(H3600, "Compaq iPAQ H3600") .atag_offset = 0x100, .map_io = h3600_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3600_mach_init, diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index b0784c974c2d..63150e1ffe9e 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -109,11 +109,8 @@ static struct flash_platform_data h3xxx_flash_data = { .nr_parts = ARRAY_SIZE(h3xxx_partitions), }; -static struct resource h3xxx_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource h3xxx_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); /* @@ -186,11 +183,7 @@ static struct sa1100_port_fns h3xxx_port_fns __initdata = { */ static struct resource egpio_resources[] = { - [0] = { - .start = H3600_EGPIO_PHYS, - .end = H3600_EGPIO_PHYS + 0x4 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(H3600_EGPIO_PHYS, 0x4), }; static struct htc_egpio_chip egpio_chips[] = { diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index c01bb36db940..5535475bf583 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -22,12 +22,10 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> @@ -35,6 +33,9 @@ #include <asm/mach/irq.h> #include <asm/mach/serial_sa1100.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + #include "generic.h" /********************************************************************** @@ -179,11 +180,8 @@ static struct flash_platform_data hackkit_flash_data = { .nr_parts = ARRAY_SIZE(hackkit_partitions), }; -static struct resource hackkit_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M, - .flags = IORESOURCE_MEM, -}; +static struct resource hackkit_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); static void __init hackkit_init(void) { @@ -197,6 +195,7 @@ static void __init hackkit_init(void) MACHINE_START(HACKKIT, "HackKit Cpu Board") .atag_offset = 0x100, .map_io = hackkit_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = hackkit_init, diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index bae8296f5dbf..3f2d1b60188c 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -1590,224 +1590,9 @@ /* * Direct Memory Access (DMA) control registers - * - * Registers - * DDAR0 Direct Memory Access (DMA) Device Address Register - * channel 0 (read/write). - * DCSR0 Direct Memory Access (DMA) Control and Status - * Register channel 0 (read/write). - * DBSA0 Direct Memory Access (DMA) Buffer Start address - * register A channel 0 (read/write). - * DBTA0 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 0 (read/write). - * DBSB0 Direct Memory Access (DMA) Buffer Start address - * register B channel 0 (read/write). - * DBTB0 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 0 (read/write). - * - * DDAR1 Direct Memory Access (DMA) Device Address Register - * channel 1 (read/write). - * DCSR1 Direct Memory Access (DMA) Control and Status - * Register channel 1 (read/write). - * DBSA1 Direct Memory Access (DMA) Buffer Start address - * register A channel 1 (read/write). - * DBTA1 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 1 (read/write). - * DBSB1 Direct Memory Access (DMA) Buffer Start address - * register B channel 1 (read/write). - * DBTB1 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 1 (read/write). - * - * DDAR2 Direct Memory Access (DMA) Device Address Register - * channel 2 (read/write). - * DCSR2 Direct Memory Access (DMA) Control and Status - * Register channel 2 (read/write). - * DBSA2 Direct Memory Access (DMA) Buffer Start address - * register A channel 2 (read/write). - * DBTA2 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 2 (read/write). - * DBSB2 Direct Memory Access (DMA) Buffer Start address - * register B channel 2 (read/write). - * DBTB2 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 2 (read/write). - * - * DDAR3 Direct Memory Access (DMA) Device Address Register - * channel 3 (read/write). - * DCSR3 Direct Memory Access (DMA) Control and Status - * Register channel 3 (read/write). - * DBSA3 Direct Memory Access (DMA) Buffer Start address - * register A channel 3 (read/write). - * DBTA3 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 3 (read/write). - * DBSB3 Direct Memory Access (DMA) Buffer Start address - * register B channel 3 (read/write). - * DBTB3 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 3 (read/write). - * - * DDAR4 Direct Memory Access (DMA) Device Address Register - * channel 4 (read/write). - * DCSR4 Direct Memory Access (DMA) Control and Status - * Register channel 4 (read/write). - * DBSA4 Direct Memory Access (DMA) Buffer Start address - * register A channel 4 (read/write). - * DBTA4 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 4 (read/write). - * DBSB4 Direct Memory Access (DMA) Buffer Start address - * register B channel 4 (read/write). - * DBTB4 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 4 (read/write). - * - * DDAR5 Direct Memory Access (DMA) Device Address Register - * channel 5 (read/write). - * DCSR5 Direct Memory Access (DMA) Control and Status - * Register channel 5 (read/write). - * DBSA5 Direct Memory Access (DMA) Buffer Start address - * register A channel 5 (read/write). - * DBTA5 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 5 (read/write). - * DBSB5 Direct Memory Access (DMA) Buffer Start address - * register B channel 5 (read/write). - * DBTB5 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 5 (read/write). */ - -#define DMASp 0x00000020 /* DMA control reg. Space [byte] */ - -#define DDAR(Nb) __REG(0xB0000000 + (Nb)*DMASp) /* DMA Device Address Reg. channel [0..5] */ -#define SetDCSR(Nb) __REG(0xB0000004 + (Nb)*DMASp) /* Set DMA Control & Status Reg. channel [0..5] (write) */ -#define ClrDCSR(Nb) __REG(0xB0000008 + (Nb)*DMASp) /* Clear DMA Control & Status Reg. channel [0..5] (write) */ -#define RdDCSR(Nb) __REG(0xB000000C + (Nb)*DMASp) /* Read DMA Control & Status Reg. channel [0..5] (read) */ -#define DBSA(Nb) __REG(0xB0000010 + (Nb)*DMASp) /* DMA Buffer Start address reg. A channel [0..5] */ -#define DBTA(Nb) __REG(0xB0000014 + (Nb)*DMASp) /* DMA Buffer Transfer count reg. A channel [0..5] */ -#define DBSB(Nb) __REG(0xB0000018 + (Nb)*DMASp) /* DMA Buffer Start address reg. B channel [0..5] */ -#define DBTB(Nb) __REG(0xB000001C + (Nb)*DMASp) /* DMA Buffer Transfer count reg. B channel [0..5] */ - -#define DDAR_RW 0x00000001 /* device data Read/Write */ -#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */ - /* (memory -> device) */ -#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */ - /* (device -> memory) */ -#define DDAR_E 0x00000002 /* big/little Endian device */ -#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */ -#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */ -#define DDAR_BS 0x00000004 /* device Burst Size */ -#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */ -#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */ -#define DDAR_DW 0x00000008 /* device Data Width */ -#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */ -#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */ -#define DDAR_DS Fld (4, 4) /* Device Select */ -#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \ - (0x0 << FShft (DDAR_DS)) -#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \ - (0x1 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \ - (0x2 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \ - (0x3 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \ - (0x4 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \ - (0x5 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \ - (0x6 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \ - (0x7 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \ - (0x8 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \ - (0x9 << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \ - /* (audio) */ \ - (0xA << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \ - /* (audio) */ \ - (0xB << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \ - /* (telecom) */ \ - (0xC << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \ - /* (telecom) */ \ - (0xD << FShft (DDAR_DS)) -#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \ - (0xE << FShft (DDAR_DS)) -#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \ - (0xF << FShft (DDAR_DS)) -#define DDAR_DA Fld (24, 8) /* Device Address */ -#define DDAR_DevAdd(Add) /* Device Address */ \ - (((Add) & 0xF0000000) | \ - (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2))) -#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \ - /* (telecom) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \ - /* (telecom) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR))) -#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR))) - -#define DCSR_RUN 0x00000001 /* DMA running */ -#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ -#define DCSR_ERROR 0x00000004 /* DMA ERROR */ -#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ -#define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */ -#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */ -#define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */ -#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */ -#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */ -#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */ - -#define DBT_TC Fld (13, 0) /* Transfer Count */ -#define DBTA_TCA DBT_TC /* Transfer Count buffer A */ -#define DBTB_TCB DBT_TC /* Transfer Count buffer B */ +#define DMA_SIZE (6 * 0x20) +#define DMA_PHYS 0xb0000000 /* @@ -1903,16 +1688,6 @@ #define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */ /* (Alternative) */ -#define LCCR0 __REG(0xB0100000) /* LCD Control Reg. 0 */ -#define LCSR __REG(0xB0100004) /* LCD Status Reg. */ -#define DBAR1 __REG(0xB0100010) /* LCD DMA Base Address Reg. channel 1 */ -#define DCAR1 __REG(0xB0100014) /* LCD DMA Current Address Reg. channel 1 */ -#define DBAR2 __REG(0xB0100018) /* LCD DMA Base Address Reg. channel 2 */ -#define DCAR2 __REG(0xB010001C) /* LCD DMA Current Address Reg. channel 2 */ -#define LCCR1 __REG(0xB0100020) /* LCD Control Reg. 1 */ -#define LCCR2 __REG(0xB0100024) /* LCD Control Reg. 2 */ -#define LCCR3 __REG(0xB0100028) /* LCD Control Reg. 3 */ - #define LCCR0_LEN 0x00000001 /* LCD ENable */ #define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */ #define LCCR0_Color (LCCR0_CMS*0) /* Color display */ diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h index 28c2cf50c259..307391488c22 100644 --- a/arch/arm/mach-sa1100/include/mach/assabet.h +++ b/arch/arm/mach-sa1100/include/mach/assabet.h @@ -85,21 +85,18 @@ extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set); #define ASSABET_BSR_RAD_RI (1 << 31) -/* GPIOs for which the generic definition doesn't say much */ +/* GPIOs (bitmasks) for which the generic definition doesn't say much */ #define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */ #define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */ #define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */ -#define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */ -#define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */ -#define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */ #define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */ -#define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */ #define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */ #define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */ -#define ASSABET_IRQ_GPIO_CF_IRQ IRQ_GPIO21 -#define ASSABET_IRQ_GPIO_CF_CD IRQ_GPIO22 -#define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24 -#define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25 +/* These are gpiolib GPIO numbers, not bitmasks */ +#define ASSABET_GPIO_CF_IRQ 21 /* CF IRQ */ +#define ASSABET_GPIO_CF_CD 22 /* CF CD */ +#define ASSABET_GPIO_CF_BVD2 24 /* CF BVD / IOSPKR */ +#define ASSABET_GPIO_CF_BVD1 25 /* CF BVD / IOSTSCHG */ #endif diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h index c3ac3d0f9465..88fd9c006ce0 100644 --- a/arch/arm/mach-sa1100/include/mach/cerf.h +++ b/arch/arm/mach-sa1100/include/mach/cerf.h @@ -14,15 +14,10 @@ #define CERF_ETH_IO 0xf0000000 #define CERF_ETH_IRQ IRQ_GPIO26 -#define CERF_GPIO_CF_BVD2 GPIO_GPIO (19) -#define CERF_GPIO_CF_BVD1 GPIO_GPIO (20) -#define CERF_GPIO_CF_RESET GPIO_GPIO (21) -#define CERF_GPIO_CF_IRQ GPIO_GPIO (22) -#define CERF_GPIO_CF_CD GPIO_GPIO (23) - -#define CERF_IRQ_GPIO_CF_BVD2 IRQ_GPIO19 -#define CERF_IRQ_GPIO_CF_BVD1 IRQ_GPIO20 -#define CERF_IRQ_GPIO_CF_IRQ IRQ_GPIO22 -#define CERF_IRQ_GPIO_CF_CD IRQ_GPIO23 +#define CERF_GPIO_CF_BVD2 19 +#define CERF_GPIO_CF_BVD1 20 +#define CERF_GPIO_CF_RESET 21 +#define CERF_GPIO_CF_IRQ 22 +#define CERF_GPIO_CF_CD 23 #endif // _INCLUDE_CERF_H_ diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h deleted file mode 100644 index dda1b351310d..000000000000 --- a/arch/arm/mach-sa1100/include/mach/dma.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/dma.h - * - * Generic SA1100 DMA support - * - * Copyright (C) 2000 Nicolas Pitre - * - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "hardware.h" - - -/* - * The SA1100 has six internal DMA channels. - */ -#define SA1100_DMA_CHANNELS 6 - -/* - * Maximum physical DMA buffer size - */ -#define MAX_DMA_SIZE 0x1fff -#define CUT_DMA_SIZE 0x1000 - -/* - * All possible SA1100 devices a DMA channel can be attached to. - */ -typedef enum { - DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */ - DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */ - DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */ - DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */ - DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */ - DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */ - DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */ - DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */ - DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */ - DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */ - DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */ - DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */ - DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */ - DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */ - DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */ - DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */ - DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */ - DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ -} dma_device_t; - -typedef struct { - volatile u_long DDAR; - volatile u_long SetDCSR; - volatile u_long ClrDCSR; - volatile u_long RdDCSR; - volatile dma_addr_t DBSA; - volatile u_long DBTA; - volatile dma_addr_t DBSB; - volatile u_long DBTB; -} dma_regs_t; - -typedef void (*dma_callback_t)(void *data); - -/* - * DMA function prototypes - */ - -extern int sa1100_request_dma( dma_device_t device, const char *device_id, - dma_callback_t callback, void *data, - dma_regs_t **regs ); -extern void sa1100_free_dma( dma_regs_t *regs ); -extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size ); -extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs); -extern void sa1100_reset_dma(dma_regs_t *regs); - -/** - * sa1100_stop_dma - stop DMA in progress - * @regs: identifier for the channel to use - * - * This stops DMA without clearing buffer pointers. Unlike - * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma() - * or sa1100_get_dma_pos(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_resume_dma - resume DMA on a stopped channel - * @regs: identifier for the channel to use - * - * This resumes DMA on a channel previously stopped with - * sa1100_stop_dma(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_clear_dma - clear DMA pointers - * @regs: identifier for the channel to use - * - * This clear any DMA state so the DMA engine is ready to restart - * with new buffers through sa1100_start_dma(). Any buffers in flight - * are discarded. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-sa1100/include/mach/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S index 6aa13c46c5d3..8cf7630bf024 100644 --- a/arch/arm/mach-sa1100/include/mach/entry-macro.S +++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S @@ -8,17 +8,11 @@ * warranty of any kind, whether express or implied. */ - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp mov \base, #0xfa000000 @ ICIP = 0xfa050000 add \base, \base, #0x00050000 .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqstat, [\base] @ get irqs ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004 diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index d18f21abef80..3790298b7142 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -71,22 +71,19 @@ /* * Figure out the MAX IRQ number. * - * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4 - * Otherwise, we have the standard IRQs only. + * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically + * allocate their IRQs above NR_IRQS. + * + * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has + * to be included in the NR_IRQS calculation. */ -#ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_BOARD_END + 55) -#elif defined(CONFIG_SHARP_LOCOMO) -#define NR_IRQS (IRQ_BOARD_START + 4) +#ifdef CONFIG_SHARP_LOCOMO +#define NR_IRQS_LOCOMO 4 #else -#define NR_IRQS (IRQ_BOARD_START) +#define NR_IRQS_LOCOMO 0 #endif -/* - * Board specific IRQs. Define them here. - * Do not surround them with ifdefs. - */ -#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0) -#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1) -#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2) +#ifndef NR_IRQS +#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO) +#endif +#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO) diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h index ed1a331508a7..4b2860ae3828 100644 --- a/arch/arm/mach-sa1100/include/mach/mcp.h +++ b/arch/arm/mach-sa1100/include/mach/mcp.h @@ -16,7 +16,7 @@ struct mcp_plat_data { u32 mccr0; u32 mccr1; unsigned int sclk_rate; - int gpio_base; + void *codec_pdata; }; #endif diff --git a/arch/arm/mach-sa1100/include/mach/nanoengine.h b/arch/arm/mach-sa1100/include/mach/nanoengine.h index 14f8382d0665..5ebd469a31f2 100644 --- a/arch/arm/mach-sa1100/include/mach/nanoengine.h +++ b/arch/arm/mach-sa1100/include/mach/nanoengine.h @@ -16,12 +16,12 @@ #include <mach/irqs.h> -#define GPIO_PC_READY0 GPIO_GPIO(11) /* ready for socket 0 (active high)*/ -#define GPIO_PC_READY1 GPIO_GPIO(12) /* ready for socket 1 (active high) */ -#define GPIO_PC_CD0 GPIO_GPIO(13) /* detect for socket 0 (active low) */ -#define GPIO_PC_CD1 GPIO_GPIO(14) /* detect for socket 1 (active low) */ -#define GPIO_PC_RESET0 GPIO_GPIO(15) /* reset socket 0 */ -#define GPIO_PC_RESET1 GPIO_GPIO(16) /* reset socket 1 */ +#define GPIO_PC_READY0 11 /* ready for socket 0 (active high)*/ +#define GPIO_PC_READY1 12 /* ready for socket 1 (active high) */ +#define GPIO_PC_CD0 13 /* detect for socket 0 (active low) */ +#define GPIO_PC_CD1 14 /* detect for socket 1 (active low) */ +#define GPIO_PC_RESET0 15 /* reset socket 0 */ +#define GPIO_PC_RESET1 16 /* reset socket 1 */ #define NANOENGINE_IRQ_GPIO_PCI IRQ_GPIO0 #define NANOENGINE_IRQ_GPIO_PC_READY0 IRQ_GPIO11 diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h index ffe2bc45eed0..5516a52a329d 100644 --- a/arch/arm/mach-sa1100/include/mach/neponset.h +++ b/arch/arm/mach-sa1100/include/mach/neponset.h @@ -15,54 +15,6 @@ /* * Neponset definitions: */ - -#define NEPONSET_CPLD_BASE (0x10000000) -#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000) -#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE) - -#define _IRR 0x10000024 /* Interrupt Reason Register */ -#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */ -#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */ -#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */ -#define _NCR_0 0x100000a0 /* Control Register (RW) */ -#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */ -#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */ -#define _SWPK 0x10000020 /* Switch pack (RO) */ -#define _WHOAMI 0x10000000 /* System ID Register (RO) */ - -#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */ - -#define IRR (*((volatile u_char *) Nep_p2v(_IRR))) -#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL))) -#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0))) -#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1))) -#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0))) -#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT))) -#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN))) -#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK))) -#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI))) - -#define LEDS (*((volatile Word *) Nep_p2v(_LEDS))) - -#define IRR_ETHERNET (1<<0) -#define IRR_USAR (1<<1) -#define IRR_SA1111 (1<<2) - -#define AUD_SEL_1341 (1<<0) -#define AUD_MUTE_1341 (1<<1) - -#define MDM_CTL0_RTS1 (1 << 0) -#define MDM_CTL0_DTR1 (1 << 1) -#define MDM_CTL0_RTS2 (1 << 2) -#define MDM_CTL0_DTR2 (1 << 3) - -#define MDM_CTL1_CTS1 (1 << 0) -#define MDM_CTL1_DSR1 (1 << 1) -#define MDM_CTL1_DCD1 (1 << 2) -#define MDM_CTL1_CTS2 (1 << 3) -#define MDM_CTL1_DSR2 (1 << 4) -#define MDM_CTL1_DCD2 (1 << 5) - #define NCR_GP01_OFF (1<<0) #define NCR_TP_PWR_EN (1<<1) #define NCR_MS_PWR_EN (1<<2) @@ -71,4 +23,8 @@ #define NCR_A0VPP (1<<5) #define NCR_A1VPP (1<<6) +void neponset_ncr_frob(unsigned int, unsigned int); +#define neponset_ncr_set(v) neponset_ncr_frob(0, v) +#define neponset_ncr_clear(v) neponset_ncr_frob(v, 0) + #endif diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h index ec27d6e12140..fff39e02b496 100644 --- a/arch/arm/mach-sa1100/include/mach/shannon.h +++ b/arch/arm/mach-sa1100/include/mach/shannon.h @@ -21,16 +21,12 @@ #define SHANNON_GPIO_U3_RTS GPIO_GPIO (19) /* ?? */ #define SHANNON_GPIO_U3_CTS GPIO_GPIO (20) /* ?? */ #define SHANNON_GPIO_SENSE_12V GPIO_GPIO (21) /* Input, 12v flash unprotect detected */ -#define SHANNON_GPIO_DISP_EN GPIO_GPIO (22) /* out */ +#define SHANNON_GPIO_DISP_EN 22 /* out */ /* XXX GPIO 23 unaccounted for */ -#define SHANNON_GPIO_EJECT_0 GPIO_GPIO (24) /* in */ -#define SHANNON_IRQ_GPIO_EJECT_0 IRQ_GPIO24 -#define SHANNON_GPIO_EJECT_1 GPIO_GPIO (25) /* in */ -#define SHANNON_IRQ_GPIO_EJECT_1 IRQ_GPIO25 -#define SHANNON_GPIO_RDY_0 GPIO_GPIO (26) /* in */ -#define SHANNON_IRQ_GPIO_RDY_0 IRQ_GPIO26 -#define SHANNON_GPIO_RDY_1 GPIO_GPIO (27) /* in */ -#define SHANNON_IRQ_GPIO_RDY_1 IRQ_GPIO27 +#define SHANNON_GPIO_EJECT_0 24 /* in */ +#define SHANNON_GPIO_EJECT_1 25 /* in */ +#define SHANNON_GPIO_RDY_0 26 /* in */ +#define SHANNON_GPIO_RDY_1 27 /* in */ /* MCP UCB codec GPIO pins... */ diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h index db28118103eb..cdea671e8931 100644 --- a/arch/arm/mach-sa1100/include/mach/simpad.h +++ b/arch/arm/mach-sa1100/include/mach/simpad.h @@ -39,10 +39,8 @@ /*--- PCMCIA ---*/ -#define GPIO_CF_CD GPIO_GPIO24 -#define GPIO_CF_IRQ GPIO_GPIO1 -#define IRQ_GPIO_CF_IRQ IRQ_GPIO1 -#define IRQ_GPIO_CF_CD IRQ_GPIO24 +#define GPIO_CF_CD 24 +#define GPIO_CF_IRQ 1 /*--- SmartCard ---*/ #define GPIO_SMART_CARD GPIO_GPIO10 diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h deleted file mode 100644 index e17b208f76d4..000000000000 --- a/arch/arm/mach-sa1100/include/mach/system.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/system.h - * - * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index dfbf824a69fa..516ccc25d7fd 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -17,6 +17,7 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/mach/irq.h> #include "generic.h" @@ -221,11 +222,8 @@ static struct irq_chip sa1100_normal_chip = { .irq_set_wake = sa1100_set_wake, }; -static struct resource irq_resource = { - .name = "irqs", - .start = 0x90050000, - .end = 0x9005ffff, -}; +static struct resource irq_resource = + DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs"); static struct sa1100irq_state { unsigned int saved; diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index ee121d6f0480..ca7a7e834720 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -23,9 +23,7 @@ #include <linux/mtd/partitions.h> #include <video/s1d13xxxfb.h> -#include <mach/hardware.h> #include <asm/hardware/sa1111.h> -#include <asm/irq.h> #include <asm/page.h> #include <asm/mach-types.h> #include <asm/setup.h> @@ -34,6 +32,9 @@ #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + #include "generic.h" /* @@ -46,7 +47,7 @@ /* memory space (line 52 of HP's doc) */ #define SA1111REGSTART 0x40000000 -#define SA1111REGLEN 0x00001fff +#define SA1111REGLEN 0x00002000 #define EPSONREGSTART 0x48000000 #define EPSONREGLEN 0x00100000 #define EPSONFBSTART 0x48200000 @@ -174,16 +175,8 @@ static struct s1d13xxxfb_pdata s1d13xxxfb_data = { }; static struct resource s1d13xxxfb_resources[] = { - [0] = { - .start = EPSONFBSTART, - .end = EPSONFBSTART + EPSONFBLEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = EPSONREGSTART, - .end = EPSONREGSTART + EPSONREGLEN, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(EPSONFBSTART, EPSONFBLEN), + [1] = DEFINE_RES_MEM(EPSONREGSTART, EPSONREGLEN), }; static struct platform_device s1d13xxxfb_device = { @@ -197,20 +190,12 @@ static struct platform_device s1d13xxxfb_device = { }; static struct resource sa1111_resources[] = { - [0] = { - .start = SA1111REGSTART, - .end = SA1111REGSTART + SA1111REGLEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIO1, - .end = IRQ_GPIO1, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN), + [1] = DEFINE_RES_IRQ(IRQ_GPIO1), }; static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .disable_devs = SA1111_DEVID_PS2_MSE, }; static u64 sa1111_dmamask = 0xffffffffUL; @@ -284,11 +269,6 @@ static struct map_desc jornada720_io_desc[] __initdata = { .pfn = __phys_to_pfn(EPSONFBSTART), .length = EPSONFBLEN, .type = MT_DEVICE - }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(SA1111REGSTART), - .length = SA1111REGLEN, - .type = MT_DEVICE } }; @@ -352,11 +332,8 @@ static struct flash_platform_data jornada720_flash_data = { .nr_parts = ARRAY_SIZE(jornada720_partitions), }; -static struct resource jornada720_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource jornada720_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); static void __init jornada720_mach_init(void) { @@ -367,6 +344,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720") /* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */ .atag_offset = 0x100, .map_io = jornada720_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = jornada720_mach_init, diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index af4e2761f3db..eb6534e0b0d0 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -6,6 +6,8 @@ #include <linux/kernel.h> #include <linux/tty.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -15,6 +17,7 @@ #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" @@ -26,8 +29,86 @@ static struct mcp_plat_data lart_mcp_data = { .sclk_rate = 11981000, }; +#ifdef LART_GREY_LCD +static struct sa1100fb_mach_info lart_grey_info = { + .pixclock = 150000, .bpp = 4, + .xres = 320, .yres = 240, + + .hsync_len = 1, .vsync_len = 1, + .left_margin = 4, .upper_margin = 0, + .right_margin = 2, .lower_margin = 0, + + .cmap_greyscale = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), +}; +#endif +#ifdef LART_COLOR_LCD +static struct sa1100fb_mach_info lart_color_info = { + .pixclock = 150000, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 2, .vsync_len = 3, + .left_margin = 69, .upper_margin = 14, + .right_margin = 8, .lower_margin = 4, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), +}; +#endif +#ifdef LART_VIDEO_OUT +static struct sa1100fb_mach_info lart_video_info = { + .pixclock = 39721, .bpp = 16, + .xres = 640, .yres = 480, + + .hsync_len = 95, .vsync_len = 2, + .left_margin = 40, .upper_margin = 32, + .right_margin = 24, .lower_margin = 11, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), +}; +#endif + +#ifdef LART_KIT01_LCD +static struct sa1100fb_mach_info lart_kit01_info = { + .pixclock = 63291, .bpp = 16, + .xres = 640, .yres = 480, + + .hsync_len = 64, .vsync_len = 3, + .left_margin = 122, .upper_margin = 45, + .right_margin = 10, .lower_margin = 10, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg +}; +#endif + static void __init lart_init(void) { + struct sa1100fb_mach_info *inf = NULL; + +#ifdef LART_GREY_LCD + inf = &lart_grey_info; +#endif +#ifdef LART_COLOR_LCD + inf = &lart_color_info; +#endif +#ifdef LART_VIDEO_OUT + inf = &lart_video_info; +#endif +#ifdef LART_KIT01_LCD + inf = &lart_kit01_info; +#endif + + if (inf) + sa11x0_register_lcd(inf); + + sa11x0_ppc_configure_mcp(); sa11x0_register_mcp(&lart_mcp_data); } @@ -63,6 +144,7 @@ static void __init lart_map_io(void) MACHINE_START(LART, "LART") .atag_offset = 0x100, .map_io = lart_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .init_machine = lart_init, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c index 64e9b4b11b54..3699176bca94 100644 --- a/arch/arm/mach-sa1100/leds-assabet.c +++ b/arch/arm/mach-sa1100/leds-assabet.c @@ -13,7 +13,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <mach/assabet.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c index cf1e38458b81..f99fac3eedb6 100644 --- a/arch/arm/mach-sa1100/leds-badge4.c +++ b/arch/arm/mach-sa1100/leds-badge4.c @@ -14,7 +14,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c index 259b48e0be89..040540fb7d8a 100644 --- a/arch/arm/mach-sa1100/leds-cerf.c +++ b/arch/arm/mach-sa1100/leds-cerf.c @@ -7,7 +7,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 2bce137462e4..6a2352436e62 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -13,7 +13,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c index 0505a1fdcdb2..a51830c60e53 100644 --- a/arch/arm/mach-sa1100/leds-lart.c +++ b/arch/arm/mach-sa1100/leds-lart.c @@ -13,7 +13,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 85f6ee672225..8f6446b9f025 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -28,6 +28,7 @@ #include <mach/hardware.h> #include <mach/nanoengine.h> +#include <mach/irqs.h> #include "generic.h" @@ -58,15 +59,8 @@ static struct flash_platform_data nanoengine_flash_data = { }; static struct resource nanoengine_flash_resources[] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), + DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M), }; static struct map_desc nanoengine_io_desc[] __initdata = { @@ -114,6 +108,7 @@ static void __init nanoengine_init(void) MACHINE_START(NANOENGINE, "BSE nanoEngine") .atag_offset = 0x100, .map_io = nanoengine_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = nanoengine_init, diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index b4fa53a1427e..6c58f01b358a 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -1,89 +1,104 @@ /* * linux/arch/arm/mach-sa1100/neponset.c - * */ -#include <linux/kernel.h> +#include <linux/err.h> #include <linux/init.h> -#include <linux/tty.h> #include <linux/ioport.h> -#include <linux/serial_core.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/serial_core.h> +#include <linux/slab.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/mach/serial_sa1100.h> -#include <mach/assabet.h> -#include <mach/neponset.h> #include <asm/hardware/sa1111.h> #include <asm/sizes.h> -/* - * Install handler for Neponset IRQ. Note that we have to loop here - * since the ETHERNET and USAR IRQs are level based, and we need to - * ensure that the IRQ signal is deasserted before returning. This - * is rather unfortunate. - */ -static void -neponset_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int irr; - - while (1) { - /* - * Acknowledge the parent IRQ. - */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - - /* - * Read the interrupt reason register. Let's have all - * active IRQ bits high. Note: there is a typo in the - * Neponset user's guide for the SA1111 IRR level. - */ - irr = IRR ^ (IRR_ETHERNET | IRR_USAR); - - if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) - break; - - /* - * Since there is no individual mask, we have to - * mask the parent IRQ. This is safe, since we'll - * recheck the register for any pending IRQs. - */ - if (irr & (IRR_ETHERNET | IRR_USAR)) { - desc->irq_data.chip->irq_mask(&desc->irq_data); - - /* - * Ack the interrupt now to prevent re-entering - * this neponset handler. Again, this is safe - * since we'll check the IRR register prior to - * leaving. - */ - desc->irq_data.chip->irq_ack(&desc->irq_data); +#include <mach/hardware.h> +#include <mach/assabet.h> +#include <mach/neponset.h> +#include <mach/irqs.h> + +#define NEP_IRQ_SMC91X 0 +#define NEP_IRQ_USAR 1 +#define NEP_IRQ_SA1111 2 +#define NEP_IRQ_NR 3 + +#define WHOAMI 0x00 +#define LEDS 0x10 +#define SWPK 0x20 +#define IRR 0x24 +#define KP_Y_IN 0x80 +#define KP_X_OUT 0x90 +#define NCR_0 0xa0 +#define MDM_CTL_0 0xb0 +#define MDM_CTL_1 0xb4 +#define AUD_CTL 0xc0 + +#define IRR_ETHERNET (1 << 0) +#define IRR_USAR (1 << 1) +#define IRR_SA1111 (1 << 2) + +#define MDM_CTL0_RTS1 (1 << 0) +#define MDM_CTL0_DTR1 (1 << 1) +#define MDM_CTL0_RTS2 (1 << 2) +#define MDM_CTL0_DTR2 (1 << 3) + +#define MDM_CTL1_CTS1 (1 << 0) +#define MDM_CTL1_DSR1 (1 << 1) +#define MDM_CTL1_DCD1 (1 << 2) +#define MDM_CTL1_CTS2 (1 << 3) +#define MDM_CTL1_DSR2 (1 << 4) +#define MDM_CTL1_DCD2 (1 << 5) + +#define AUD_SEL_1341 (1 << 0) +#define AUD_MUTE_1341 (1 << 1) - if (irr & IRR_ETHERNET) { - generic_handle_irq(IRQ_NEPONSET_SMC9196); - } +extern void sa1110_mb_disable(void); - if (irr & IRR_USAR) { - generic_handle_irq(IRQ_NEPONSET_USAR); - } +struct neponset_drvdata { + void __iomem *base; + struct platform_device *sa1111; + struct platform_device *smc91x; + unsigned irq_base; +#ifdef CONFIG_PM_SLEEP + u32 ncr0; + u32 mdm_ctl_0; +#endif +}; - desc->irq_data.chip->irq_unmask(&desc->irq_data); - } +static void __iomem *nep_base; - if (irr & IRR_SA1111) { - generic_handle_irq(IRQ_NEPONSET_SA1111); - } +void neponset_ncr_frob(unsigned int mask, unsigned int val) +{ + void __iomem *base = nep_base; + + if (base) { + unsigned long flags; + unsigned v; + + local_irq_save(flags); + v = readb_relaxed(base + NCR_0); + writeb_relaxed((v & ~mask) | val, base + NCR_0); + local_irq_restore(flags); + } else { + WARN(1, "nep_base unset\n"); } } static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) { - u_int mdm_ctl0 = MDM_CTL_0; + void __iomem *base = nep_base; + u_int mdm_ctl0; + if (!base) + return; + + mdm_ctl0 = readb_relaxed(base + MDM_CTL_0); if (port->mapbase == _Ser1UTCR0) { if (mctrl & TIOCM_RTS) mdm_ctl0 &= ~MDM_CTL0_RTS2; @@ -106,14 +121,19 @@ static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) mdm_ctl0 |= MDM_CTL0_DTR1; } - MDM_CTL_0 = mdm_ctl0; + writeb_relaxed(mdm_ctl0, base + MDM_CTL_0); } static u_int neponset_get_mctrl(struct uart_port *port) { + void __iomem *base = nep_base; u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - u_int mdm_ctl1 = MDM_CTL_1; + u_int mdm_ctl1; + + if (!base) + return ret; + mdm_ctl1 = readb_relaxed(base + MDM_CTL_1); if (port->mapbase == _Ser1UTCR0) { if (mdm_ctl1 & MDM_CTL1_DCD2) ret &= ~TIOCM_CD; @@ -138,209 +158,278 @@ static struct sa1100_port_fns neponset_port_fns __devinitdata = { .get_mctrl = neponset_get_mctrl, }; -static int __devinit neponset_probe(struct platform_device *dev) +/* + * Install handler for Neponset IRQ. Note that we have to loop here + * since the ETHERNET and USAR IRQs are level based, and we need to + * ensure that the IRQ signal is deasserted before returning. This + * is rather unfortunate. + */ +static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc) { - sa1100_register_uart_fns(&neponset_port_fns); + struct neponset_drvdata *d = irq_desc_get_handler_data(desc); + unsigned int irr; - /* - * Install handler for GPIO25. - */ - irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); - irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler); + while (1) { + /* + * Acknowledge the parent IRQ. + */ + desc->irq_data.chip->irq_ack(&desc->irq_data); - /* - * We would set IRQ_GPIO25 to be a wake-up IRQ, but - * unfortunately something on the Neponset activates - * this IRQ on sleep (ethernet?) - */ -#if 0 - enable_irq_wake(IRQ_GPIO25); -#endif + /* + * Read the interrupt reason register. Let's have all + * active IRQ bits high. Note: there is a typo in the + * Neponset user's guide for the SA1111 IRR level. + */ + irr = readb_relaxed(d->base + IRR); + irr ^= IRR_ETHERNET | IRR_USAR; - /* - * Setup other Neponset IRQs. SA1111 will be done by the - * generic SA1111 code. - */ - irq_set_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq); - set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE); - irq_set_handler(IRQ_NEPONSET_USAR, handle_simple_irq); - set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE); + if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) + break; - /* - * Disable GPIO 0/1 drivers so the buttons work on the module. - */ - NCR_0 = NCR_GP01_OFF; + /* + * Since there is no individual mask, we have to + * mask the parent IRQ. This is safe, since we'll + * recheck the register for any pending IRQs. + */ + if (irr & (IRR_ETHERNET | IRR_USAR)) { + desc->irq_data.chip->irq_mask(&desc->irq_data); - return 0; -} + /* + * Ack the interrupt now to prevent re-entering + * this neponset handler. Again, this is safe + * since we'll check the IRR register prior to + * leaving. + */ + desc->irq_data.chip->irq_ack(&desc->irq_data); -#ifdef CONFIG_PM + if (irr & IRR_ETHERNET) + generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X); -/* - * LDM power management. - */ -static unsigned int neponset_saved_state; + if (irr & IRR_USAR) + generic_handle_irq(d->irq_base + NEP_IRQ_USAR); -static int neponset_suspend(struct platform_device *dev, pm_message_t state) -{ - /* - * Save state. - */ - neponset_saved_state = NCR_0; + desc->irq_data.chip->irq_unmask(&desc->irq_data); + } - return 0; + if (irr & IRR_SA1111) + generic_handle_irq(d->irq_base + NEP_IRQ_SA1111); + } } -static int neponset_resume(struct platform_device *dev) +/* Yes, we really do not have any kind of masking or unmasking */ +static void nochip_noop(struct irq_data *irq) { - NCR_0 = neponset_saved_state; - - return 0; } -#else -#define neponset_suspend NULL -#define neponset_resume NULL -#endif - -static struct platform_driver neponset_device_driver = { - .probe = neponset_probe, - .suspend = neponset_suspend, - .resume = neponset_resume, - .driver = { - .name = "neponset", - }, -}; - -static struct resource neponset_resources[] = { - [0] = { - .start = 0x10000000, - .end = 0x17ffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device neponset_device = { - .name = "neponset", - .id = 0, - .num_resources = ARRAY_SIZE(neponset_resources), - .resource = neponset_resources, -}; - -static struct resource sa1111_resources[] = { - [0] = { - .start = 0x40000000, - .end = 0x40001fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_NEPONSET_SA1111, - .end = IRQ_NEPONSET_SA1111, - .flags = IORESOURCE_IRQ, - }, +static struct irq_chip nochip = { + .name = "neponset", + .irq_ack = nochip_noop, + .irq_mask = nochip_noop, + .irq_unmask = nochip_noop, }; static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .disable_devs = SA1111_DEVID_PS2_MSE, }; -static u64 sa1111_dmamask = 0xffffffffUL; +static int __devinit neponset_probe(struct platform_device *dev) +{ + struct neponset_drvdata *d; + struct resource *nep_res, *sa1111_res, *smc91x_res; + struct resource sa1111_resources[] = { + DEFINE_RES_MEM(0x40000000, SZ_8K), + { .flags = IORESOURCE_IRQ }, + }; + struct platform_device_info sa1111_devinfo = { + .parent = &dev->dev, + .name = "sa1111", + .id = 0, + .res = sa1111_resources, + .num_res = ARRAY_SIZE(sa1111_resources), + .data = &sa1111_info, + .size_data = sizeof(sa1111_info), + .dma_mask = 0xffffffffUL, + }; + struct resource smc91x_resources[] = { + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS, + 0x02000000, "smc91x-regs"), + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000, + 0x02000000, "smc91x-attrib"), + { .flags = IORESOURCE_IRQ }, + }; + struct platform_device_info smc91x_devinfo = { + .parent = &dev->dev, + .name = "smc91x", + .id = 0, + .res = smc91x_resources, + .num_res = ARRAY_SIZE(smc91x_resources), + }; + int ret, irq; + + if (nep_base) + return -EBUSY; + + irq = ret = platform_get_irq(dev, 0); + if (ret < 0) + goto err_alloc; + + nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0); + smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1); + sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2); + if (!nep_res || !smc91x_res || !sa1111_res) { + ret = -ENXIO; + goto err_alloc; + } -static struct platform_device sa1111_device = { - .name = "sa1111", - .id = 0, - .dev = { - .dma_mask = &sa1111_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &sa1111_info, - }, - .num_resources = ARRAY_SIZE(sa1111_resources), - .resource = sa1111_resources, -}; + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) { + ret = -ENOMEM; + goto err_alloc; + } -static struct resource smc91x_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = SA1100_CS3_PHYS, - .end = SA1100_CS3_PHYS + 0x01ffffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_NEPONSET_SMC9196, - .end = IRQ_NEPONSET_SMC9196, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .name = "smc91x-attrib", - .start = SA1100_CS3_PHYS + 0x02000000, - .end = SA1100_CS3_PHYS + 0x03ffffff, - .flags = IORESOURCE_MEM, - }, -}; + d->base = ioremap(nep_res->start, SZ_4K); + if (!d->base) { + ret = -ENOMEM; + goto err_ioremap; + } -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; + if (readb_relaxed(d->base + WHOAMI) != 0x11) { + dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n", + readb_relaxed(d->base + WHOAMI)); + ret = -ENODEV; + goto err_id; + } -static struct platform_device *devices[] __initdata = { - &neponset_device, - &sa1111_device, - &smc91x_device, -}; + ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1); + if (ret <= 0) { + dev_err(&dev->dev, "unable to allocate %u irqs: %d\n", + NEP_IRQ_NR, ret); + if (ret == 0) + ret = -ENOMEM; + goto err_irq_alloc; + } -extern void sa1110_mb_disable(void); + d->irq_base = ret; -static int __init neponset_init(void) -{ - platform_driver_register(&neponset_device_driver); + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip, + handle_simple_irq); + set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE); + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip, + handle_simple_irq); + set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE); + irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip); - /* - * The Neponset is only present on the Assabet machine type. - */ - if (!machine_is_assabet()) - return -ENODEV; + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + irq_set_handler_data(irq, d); + irq_set_chained_handler(irq, neponset_irq_handler); /* - * Ensure that the memory bus request/grant signals are setup, - * and the grant is held in its inactive state, whether or not - * we actually have a Neponset attached. + * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately + * something on the Neponset activates this IRQ on sleep (eth?) */ +#if 0 + enable_irq_wake(irq); +#endif + + dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n", + d->irq_base, d->irq_base + NEP_IRQ_NR - 1); + nep_base = d->base; + + sa1100_register_uart_fns(&neponset_port_fns); + + /* Ensure that the memory bus request/grant signals are setup */ sa1110_mb_disable(); - if (!machine_has_neponset()) { - printk(KERN_DEBUG "Neponset expansion board not present\n"); - return -ENODEV; - } + /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */ + writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0); - if (WHOAMI != 0x11) { - printk(KERN_WARNING "Neponset board detected, but " - "wrong ID: %02x\n", WHOAMI); - return -ENODEV; - } + sa1111_resources[0].parent = sa1111_res; + sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111; + sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111; + d->sa1111 = platform_device_register_full(&sa1111_devinfo); + + smc91x_resources[0].parent = smc91x_res; + smc91x_resources[1].parent = smc91x_res; + smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X; + smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X; + d->smc91x = platform_device_register_full(&smc91x_devinfo); + + platform_set_drvdata(dev, d); - return platform_add_devices(devices, ARRAY_SIZE(devices)); + return 0; + + err_irq_alloc: + err_id: + iounmap(d->base); + err_ioremap: + kfree(d); + err_alloc: + return ret; } -subsys_initcall(neponset_init); +static int __devexit neponset_remove(struct platform_device *dev) +{ + struct neponset_drvdata *d = platform_get_drvdata(dev); + int irq = platform_get_irq(dev, 0); + + if (!IS_ERR(d->sa1111)) + platform_device_unregister(d->sa1111); + if (!IS_ERR(d->smc91x)) + platform_device_unregister(d->smc91x); + irq_set_chained_handler(irq, NULL); + irq_free_descs(d->irq_base, NEP_IRQ_NR); + nep_base = NULL; + iounmap(d->base); + kfree(d); -static struct map_desc neponset_io_desc[] __initdata = { - { /* System Registers */ - .virtual = 0xf3000000, - .pfn = __phys_to_pfn(0x10000000), - .length = SZ_1M, - .type = MT_DEVICE - }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(0x40000000), - .length = SZ_1M, - .type = MT_DEVICE - } + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int neponset_suspend(struct device *dev) +{ + struct neponset_drvdata *d = dev_get_drvdata(dev); + + d->ncr0 = readb_relaxed(d->base + NCR_0); + d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0); + + return 0; +} + +static int neponset_resume(struct device *dev) +{ + struct neponset_drvdata *d = dev_get_drvdata(dev); + + writeb_relaxed(d->ncr0, d->base + NCR_0); + writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0); + + return 0; +} + +static const struct dev_pm_ops neponset_pm_ops = { + .suspend_noirq = neponset_suspend, + .resume_noirq = neponset_resume, + .freeze_noirq = neponset_suspend, + .restore_noirq = neponset_resume, +}; +#define PM_OPS &neponset_pm_ops +#else +#define PM_OPS NULL +#endif + +static struct platform_driver neponset_device_driver = { + .probe = neponset_probe, + .remove = __devexit_p(neponset_remove), + .driver = { + .name = "neponset", + .owner = THIS_MODULE, + .pm = PM_OPS, + }, }; -void __init neponset_map_io(void) +static int __init neponset_init(void) { - iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc)); + return platform_driver_register(&neponset_device_driver); } + +subsys_initcall(neponset_init); diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index 0d01ca788922..b49108b890a8 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -135,12 +135,8 @@ struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys &sys->resources); } -static struct resource pci_io_ports = { - .name = "PCI IO", - .start = 0x400, - .end = 0x7FF, - .flags = IORESOURCE_IO, -}; +static struct resource pci_io_ports = + DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO"); static struct resource pci_non_prefetchable_memory = { .name = "PCI non-prefetchable", @@ -244,9 +240,11 @@ static int __init pci_nanoengine_setup_resources(struct pci_sys_data *sys) printk(KERN_ERR "PCI: unable to allocate prefetchable\n"); return -EBUSY; } - pci_add_resource(&sys->resources, &pci_io_ports); - pci_add_resource(&sys->resources, &pci_non_prefetchable_memory); - pci_add_resource(&sys->resources, &pci_prefetchable_memory); + pci_add_resource_offset(&sys->resources, &pci_io_ports, sys->io_offset); + pci_add_resource_offset(&sys->resources, + &pci_non_prefetchable_memory, sys->mem_offset); + pci_add_resource_offset(&sys->resources, + &pci_prefetchable_memory, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 9307df053533..1602575a0d5c 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -37,17 +37,9 @@ #define IRQ_GPIO_ETH0_IRQ IRQ_GPIO21 static struct resource smc91x_resources[] = { - [0] = { - .start = PLEB_ETH0_P, - .end = PLEB_ETH0_P | 0x03ffffff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(PLEB_ETH0_P, 0x04000000), #if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */ - [1] = { - .start = IRQ_GPIO_ETH0_IRQ, - .end = IRQ_GPIO_ETH0_IRQ, - .flags = IORESOURCE_IRQ, - }, + [1] = DEFINE_RES_IRQ(IRQ_GPIO_ETH0_IRQ), #endif }; @@ -70,16 +62,8 @@ static struct platform_device *devices[] __initdata = { * the two SA1100 lowest chip select outputs. */ static struct resource pleb_flash_resources[] = { - [0] = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_8M), + [1] = DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_8M), }; @@ -147,6 +131,7 @@ static void __init pleb_map_io(void) MACHINE_START(PLEB, "PLEB") .map_io = pleb_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = pleb_init, diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index bf85b8b259d5..2fa499ec6afe 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <asm/memory.h> #include <asm/suspend.h> -#include <asm/system.h> #include <asm/mach/time.h> extern int sa1100_finish_suspend(unsigned long); diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 318b2b766a0b..ca8bf59b9047 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -9,6 +9,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/setup.h> @@ -19,6 +21,7 @@ #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> #include <mach/shannon.h> +#include <mach/irqs.h> #include "generic.h" @@ -46,19 +49,32 @@ static struct flash_platform_data shannon_flash_data = { .nr_parts = ARRAY_SIZE(shannon_partitions), }; -static struct resource shannon_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_4M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource shannon_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_4M); static struct mcp_plat_data shannon_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, }; +static struct sa1100fb_mach_info shannon_lcd_info = { + .pixclock = 152500, .bpp = 8, + .xres = 640, .yres = 480, + + .hsync_len = 4, .vsync_len = 3, + .left_margin = 2, .upper_margin = 0, + .right_margin = 1, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas, + .lccr3 = LCCR3_ACBsDiv(512), +}; + static void __init shannon_init(void) { + sa11x0_ppc_configure_mcp(); + sa11x0_register_lcd(&shannon_lcd_info); sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); sa11x0_register_mcp(&shannon_mcp_data); } @@ -84,6 +100,7 @@ static void __init shannon_map_io(void) MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") .atag_offset = 0x100, .map_io = shannon_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = shannon_init, diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index e17c04d6e324..3efae03cb3d7 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -7,15 +7,15 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/proc_fs.h> -#include <linux/string.h> +#include <linux/string.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/gpio.h> -#include <asm/irq.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -26,6 +26,7 @@ #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> #include <mach/simpad.h> +#include <mach/irqs.h> #include <linux/serial_core.h> #include <linux/ioport.h> @@ -176,21 +177,18 @@ static struct flash_platform_data simpad_flash_data = { static struct resource simpad_flash_resources [] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_16M -1, - .flags = IORESOURCE_MEM, - }, { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_16M -1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M), + DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_16M), +}; + +static struct ucb1x00_plat_data simpad_ucb1x00_data = { + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, }; static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, + .codec_pdata = &simpad_ucb1x00_data, }; @@ -376,6 +374,7 @@ static int __init simpad_init(void) pm_power_off = simpad_power_off; + sa11x0_ppc_configure_mcp(); sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, ARRAY_SIZE(simpad_flash_resources)); sa11x0_register_mcp(&simpad_mcp_data); @@ -394,6 +393,7 @@ MACHINE_START(SIMPAD, "Simpad") /* Maintainer: Holger Freyther */ .atag_offset = 0x100, .map_io = simpad_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index e8223315b442..30cc6721665b 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -26,27 +26,36 @@ * * Causes sa11x0 to enter sleep state * + * Must be aligned to a cacheline. */ - + .balign 32 ENTRY(sa1100_finish_suspend) @ disable clock switching mcr p15, 0, r1, c15, c2, 2 - @ Adjust memory timing before lowering CPU clock - @ Clock speed adjustment without changing memory timing makes - @ CPU hang in some cases - ldr r0, =MDREFR - ldr r1, [r0] - orr r1, r1, #MDREFR_K1DB2 - str r1, [r0] + ldr r6, =MDREFR + ldr r4, [r6] + orr r4, r4, #MDREFR_K1DB2 + ldr r5, =PPCR + + @ Pre-load __udelay into the I-cache + mov r0, #1 + bl __udelay + mov r0, r0 + + @ The following must all exist in a single cache line to + @ avoid accessing memory until this sequence is complete, + @ otherwise we occasionally hang. + + @ Adjust memory timing before lowering CPU clock + str r4, [r6] @ delay 90us and set CPU PLL to lowest speed @ fixes resume problem on high speed SA1110 mov r0, #90 bl __udelay - ldr r0, =PPCR mov r1, #0 - str r1, [r0] + str r1, [r5] mov r0, #90 bl __udelay @@ -85,12 +94,10 @@ ENTRY(sa1100_finish_suspend) bic r5, r5, #FMsk(MSC_RT) bic r5, r5, #FMsk(MSC_RT)<<16 - ldr r6, =MDREFR - ldr r7, [r6] -bic r7, r7, #0x0000FF00 -bic r7, r7, #0x000000F0 -orr r8, r7, #MDREFR_SLFRSH + bic r7, r7, #0x0000FF00 + bic r7, r7, #0x000000F0 + orr r8, r7, #MDREFR_SLFRSH ldr r9, =MDCNFG ldr r10, [r9] diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c index b20ff93b84a5..e22fca9ad5ec 100644 --- a/arch/arm/mach-sa1100/ssp.c +++ b/arch/arm/mach-sa1100/ssp.c @@ -19,8 +19,8 @@ #include <linux/init.h> #include <linux/io.h> -#include <asm/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/hardware/ssp.h> #define TIMEOUT 100000 diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 69e33535dee6..6af26e8d55e6 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -18,6 +18,7 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> #include <mach/hardware.h> +#include <mach/irqs.h> static u32 notrace sa1100_read_sched_clock(void) { diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a851c254ad6c..6a2a7f2c2557 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -149,10 +149,16 @@ static struct sys_timer shark_timer = { .init = shark_timer_init, }; +static void shark_init_early(void) +{ + disable_hlt(); +} + MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ .atag_offset = 0x3000, .map_io = shark_map_io, + .init_early = shark_init_early, .init_irq = shark_init_irq, .timer = &shark_timer, .dma_zone_size = SZ_4M, diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S index 0bb6cc626eb7..5901b09fc96a 100644 --- a/arch/arm/mach-shark/include/mach/entry-macro.S +++ b/arch/arm/mach-shark/include/mach/entry-macro.S @@ -7,16 +7,10 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp mov \base, #0xe0000000 .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp mov \irqstat, #0x0C diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h deleted file mode 100644 index 1b2f2c5050a8..000000000000 --- a/arch/arm/mach-shark/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/system.h - * - * by Alexander Schulz - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ -} - -#endif diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c index ccd49189bbd0..25609076921f 100644 --- a/arch/arm/mach-shark/leds.c +++ b/arch/arm/mach-shark/leds.c @@ -23,7 +23,6 @@ #include <linux/io.h> #include <asm/leds.h> -#include <asm/system.h> #define LED_STATE_ENABLED 1 #define LED_STATE_CLAIMED 2 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 7ad6954c46cd..e7c2590b75d9 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o # SMP objects smp-y := platsmp.o headsmp.o smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o -smp-$(CONFIG_LOCAL_TIMERS) += localtimer.o smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 8aea3a2dd889..f50d7c8b1221 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -47,8 +47,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/traps.h> @@ -230,16 +228,6 @@ static void lcd_backlight_reset(void) gpio_set_value(GPIO_PORT235, 1); } -static void lcd_on(void *board_data, struct fb_info *info) -{ - lcd_backlight_on(); -} - -static void lcd_off(void *board_data) -{ - lcd_backlight_reset(); -} - /* LCDC0 */ static const struct fb_videomode lcdc0_modes[] = { { @@ -263,14 +251,14 @@ static struct sh_mobile_lcdc_info lcdc0_info = { .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, - .lcd_size_cfg.width = 44, - .lcd_size_cfg.height = 79, .fourcc = V4L2_PIX_FMT_RGB565, - .lcd_cfg = lcdc0_modes, - .num_cfg = ARRAY_SIZE(lcdc0_modes), - .board_cfg = { - .display_on = lcd_on, - .display_off = lcd_off, + .lcd_modes = lcdc0_modes, + .num_modes = ARRAY_SIZE(lcdc0_modes), + .panel_cfg = { + .width = 44, + .height = 79, + .display_on = lcd_backlight_on, + .display_off = lcd_backlight_reset, }, } }; @@ -487,27 +475,6 @@ static struct platform_device *ag5evm_devices[] __initdata = { &sdhi1_device, }; -static struct map_desc ag5evm_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init ag5evm_map_io(void) -{ - iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc)); - - /* setup early devices and console here as well */ - sh73a0_add_early_devices(); - shmobile_setup_console(); -} - static void __init ag5evm_init(void) { sh73a0_pinmux_init(); @@ -623,22 +590,12 @@ static void __init ag5evm_init(void) platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices)); } -static void __init ag5evm_timer_init(void) -{ - sh73a0_clock_init(); - shmobile_timer.init(); - return; -} - -struct sys_timer ag5evm_timer = { - .init = ag5evm_timer_init, -}; - MACHINE_START(AG5EVM, "ag5evm") - .map_io = ag5evm_map_io, + .map_io = sh73a0_map_io, + .init_early = sh73a0_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = gic_handle_irq, .init_machine = ag5evm_init, - .timer = &ag5evm_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index b4718b00e827..b56dde2732bb 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -61,8 +61,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/setup.h> /* @@ -258,10 +256,16 @@ static struct sh_mobile_meram_info meram_info = { static struct resource meram_resources[] = { [0] = { - .name = "MERAM", - .start = 0xe8000000, - .end = 0xe81fffff, - .flags = IORESOURCE_MEM, + .name = "regs", + .start = 0xe8000000, + .end = 0xe807ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "meram", + .start = 0xe8080000, + .end = 0xe81fffff, + .flags = IORESOURCE_MEM, }, }; @@ -437,82 +441,6 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; -static const struct fb_videomode ap4evb_lcdc_modes[] = { - { -#ifdef CONFIG_AP4EVB_QHD - .name = "R63302(QHD)", - .xres = 544, - .yres = 961, - .left_margin = 72, - .right_margin = 600, - .hsync_len = 16, - .upper_margin = 8, - .lower_margin = 8, - .vsync_len = 2, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, -#else - .name = "WVGA Panel", - .xres = 800, - .yres = 480, - .left_margin = 220, - .right_margin = 110, - .hsync_len = 70, - .upper_margin = 20, - .lower_margin = 5, - .vsync_len = 5, - .sync = 0, -#endif - }, -}; -static struct sh_mobile_meram_cfg lcd_meram_cfg = { - .icb[0] = { - .marker_icb = 28, - .cache_icb = 24, - .meram_offset = 0x0, - .meram_size = 0x40, - }, - .icb[1] = { - .marker_icb = 29, - .cache_icb = 25, - .meram_offset = 0x40, - .meram_size = 0x40, - }, -}; - -static struct sh_mobile_lcdc_info lcdc_info = { - .meram_dev = &meram_info, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .lcd_cfg = ap4evb_lcdc_modes, - .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), - .meram_cfg = &lcd_meram_cfg, - } -}; - -static struct resource lcdc_resources[] = { - [0] = { - .name = "LCDC", - .start = 0xfe940000, /* P4-only space */ - .end = 0xfe943fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x580), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device lcdc_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(lcdc_resources), - .resource = lcdc_resources, - .dev = { - .platform_data = &lcdc_info, - .coherent_dma_mask = ~0, - }, -}; - /* * QHD display */ @@ -556,20 +484,25 @@ static struct platform_device keysc_device = { }; /* MIPI-DSI */ -#define PHYCTRL 0x0070 static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { struct clk *pck = clk_get(&pdev->dev, "dsip_clk"); - void __iomem *phy = base + PHYCTRL; if (IS_ERR(pck)) return PTR_ERR(pck); if (enable) { + /* + * DSIPCLK = 24MHz + * D-PHY = DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl) + * HsByteCLK = D-PHY/8 = 39MHz + * + * X * Y * FPS = + * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz + */ clk_set_rate(pck, clk_round_rate(pck, 24000000)); - iowrite32(ioread32(phy) | (0xb << 8), phy); clk_enable(pck); } else { clk_disable(pck); @@ -593,11 +526,14 @@ static struct resource mipidsi0_resources[] = { }, }; +static struct sh_mobile_lcdc_info lcdc_info; + static struct sh_mipi_dsi_info mipidsi0_info = { .data_format = MIPI_RGB888, .lcd_chan = &lcdc_info.ch[0], .lane = 2, .vsynw_offset = 17, + .phyctrl = 0x6 << 8, .flags = SH_MIPI_DSI_SYNC_PULSES_MODE | SH_MIPI_DSI_HSbyteCLK, .set_dot_clock = sh_mipi_set_dot_clock, @@ -619,6 +555,81 @@ static struct platform_device *qhd_devices[] __initdata = { }; #endif /* CONFIG_AP4EVB_QHD */ +/* LCDC0 */ +static const struct fb_videomode ap4evb_lcdc_modes[] = { + { +#ifdef CONFIG_AP4EVB_QHD + .name = "R63302(QHD)", + .xres = 544, + .yres = 961, + .left_margin = 72, + .right_margin = 600, + .hsync_len = 16, + .upper_margin = 8, + .lower_margin = 8, + .vsync_len = 2, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, +#else + .name = "WVGA Panel", + .xres = 800, + .yres = 480, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 70, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, +#endif + }, +}; + +static const struct sh_mobile_meram_cfg lcd_meram_cfg = { + .icb[0] = { + .meram_size = 0x40, + }, + .icb[1] = { + .meram_size = 0x40, + }, +}; + +static struct sh_mobile_lcdc_info lcdc_info = { + .meram_dev = &meram_info, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .fourcc = V4L2_PIX_FMT_RGB565, + .lcd_modes = ap4evb_lcdc_modes, + .num_modes = ARRAY_SIZE(ap4evb_lcdc_modes), + .meram_cfg = &lcd_meram_cfg, +#ifdef CONFIG_AP4EVB_QHD + .tx_dev = &mipidsi0_device, +#endif + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + .coherent_dma_mask = ~0, + }, +}; + /* FSI */ #define IRQ_FSI evt2irq(0x1840) static int __fsi_set_rate(struct clk *clk, long rate, int enable) @@ -737,26 +748,18 @@ fsi_set_rate_end: return ret; } -static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) -{ - int ret; - - if (is_porta) - ret = fsi_ak4642_set_rate(dev, rate, enable); - else - ret = fsi_hdmi_set_rate(dev, rate, enable); - - return ret; -} - static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV, - - .portb_flags = SH_FSI_BRS_INV | - SH_FSI_BRM_INV | - SH_FSI_LRS_INV | - SH_FSI_FMT_SPDIF, - .set_rate = fsi_set_rate, + .port_a = { + .flags = SH_FSI_BRS_INV, + .set_rate = fsi_ak4642_set_rate, + }, + .port_b = { + .flags = SH_FSI_BRS_INV | + SH_FSI_BRM_INV | + SH_FSI_LRS_INV | + SH_FSI_FMT_SPDIF, + .set_rate = fsi_hdmi_set_rate, + }, }; static struct resource fsi_resources[] = { @@ -798,65 +801,11 @@ static struct platform_device fsi_ak4643_device = { }, }; -static struct sh_mobile_meram_cfg hdmi_meram_cfg = { - .icb[0] = { - .marker_icb = 30, - .cache_icb = 26, - .meram_offset = 0x80, - .meram_size = 0x100, - }, - .icb[1] = { - .marker_icb = 31, - .cache_icb = 27, - .meram_offset = 0x180, - .meram_size = 0x100, - }, -}; - -static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { - .clock_source = LCDC_CLK_EXTERNAL, - .meram_dev = &meram_info, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .interface_type = RGB24, - .clock_divider = 1, - .flags = LCDC_FLAGS_DWPOL, - .meram_cfg = &hdmi_meram_cfg, - } -}; - -static struct resource lcdc1_resources[] = { - [0] = { - .name = "LCDC1", - .start = 0xfe944000, - .end = 0xfe947fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x1780), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device lcdc1_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(lcdc1_resources), - .resource = lcdc1_resources, - .id = 1, - .dev = { - .platform_data = &sh_mobile_lcdc1_info, - .coherent_dma_mask = ~0, - }, -}; - +/* LCDC1 */ static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, unsigned long *parent_freq); - static struct sh_mobile_hdmi_info hdmi_info = { - .lcd_chan = &sh_mobile_lcdc1_info.ch[0], - .lcd_dev = &lcdc1_device.dev, .flags = HDMI_SND_SRC_SPDIF, .clk_optimize_parent = ap4evb_clk_optimize, }; @@ -885,10 +834,6 @@ static struct platform_device hdmi_device = { }, }; -static struct platform_device fsi_hdmi_device = { - .name = "sh_fsi2_b_hdmi", -}; - static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, unsigned long *parent_freq) { @@ -908,6 +853,57 @@ static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, return error; } +static const struct sh_mobile_meram_cfg hdmi_meram_cfg = { + .icb[0] = { + .meram_size = 0x100, + }, + .icb[1] = { + .meram_size = 0x100, + }, +}; + +static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .meram_dev = &meram_info, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .fourcc = V4L2_PIX_FMT_RGB565, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .meram_cfg = &hdmi_meram_cfg, + .tx_dev = &hdmi_device, + } +}; + +static struct resource lcdc1_resources[] = { + [0] = { + .name = "LCDC1", + .start = 0xfe944000, + .end = 0xfe947fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x1780), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc1_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc1_resources), + .resource = lcdc1_resources, + .id = 1, + .dev = { + .platform_data = &sh_mobile_lcdc1_info, + .coherent_dma_mask = ~0, + }, +}; + +static struct platform_device fsi_hdmi_device = { + .name = "sh_fsi2_b_hdmi", +}; + static struct gpio_led ap4evb_leds[] = { { .name = "led4", @@ -1042,9 +1038,9 @@ static struct platform_device *ap4evb_devices[] __initdata = { &fsi_ak4643_device, &fsi_hdmi_device, &sh_mmcif_device, - &lcdc1_device, - &lcdc_device, &hdmi_device, + &lcdc_device, + &lcdc1_device, &ceu_device, &ap4evb_camera, &meram_device, @@ -1190,26 +1186,6 @@ static struct i2c_board_info i2c1_devices[] = { }, }; -static struct map_desc ap4evb_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init ap4evb_map_io(void) -{ - iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); - - /* setup early devices and console here as well */ - sh7372_add_early_devices(); - shmobile_setup_console(); -} #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A @@ -1219,6 +1195,9 @@ static void __init ap4evb_init(void) u32 srcr4; struct clk *clk; + /* External clock source */ + clk_set_rate(&sh7372_dv_clki_clk, 27000000); + sh7372_pinmux_init(); /* enable SCIFA0 */ @@ -1355,8 +1334,8 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].interface_type = RGB24; lcdc_info.ch[0].clock_divider = 1; lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; - lcdc_info.ch[0].lcd_size_cfg.width = 44; - lcdc_info.ch[0].lcd_size_cfg.height = 79; + lcdc_info.ch[0].panel_cfg.width = 44; + lcdc_info.ch[0].panel_cfg.height = 79; platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices)); @@ -1397,8 +1376,8 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].interface_type = RGB18; lcdc_info.ch[0].clock_divider = 3; lcdc_info.ch[0].flags = 0; - lcdc_info.ch[0].lcd_size_cfg.width = 152; - lcdc_info.ch[0].lcd_size_cfg.height = 91; + lcdc_info.ch[0].panel_cfg.width = 152; + lcdc_info.ch[0].panel_cfg.height = 91; /* enable TouchScreen */ irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); @@ -1455,23 +1434,11 @@ static void __init ap4evb_init(void) pm_clk_add(&lcdc1_device.dev, "hdmi"); } -static void __init ap4evb_timer_init(void) -{ - sh7372_clock_init(); - shmobile_timer.init(); - - /* External clock source */ - clk_set_rate(&sh7372_dv_clki_clk, 27000000); -} - -static struct sys_timer ap4evb_timer = { - .init = ap4evb_timer_init, -}; - MACHINE_START(AP4EVB, "ap4evb") - .map_io = ap4evb_map_io, + .map_io = sh7372_map_io, + .init_early = sh7372_add_early_devices, .init_irq = sh7372_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = ap4evb_init, - .timer = &ap4evb_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index 4bd1162ce0df..8b2124da245d 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -246,9 +246,9 @@ static struct sh_mobile_lcdc_info lcdc0_info = { .interface_type = RGB24, .clock_divider = 5, .flags = 0, - .lcd_cfg = &lcdc0_mode, - .num_cfg = 1, - .lcd_size_cfg = { + .lcd_modes = &lcdc0_mode, + .num_modes = 1, + .panel_cfg = { .width = 152, .height = 91, }, @@ -328,28 +328,6 @@ static struct platform_device *bonito_base_devices[] __initdata = { * map I/O */ static struct map_desc bonito_io_desc[] __initdata = { - /* - * for CPGA/INTC/PFC - * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 160 << 20, - .type = MT_DEVICE_NONSHARED - }, -#ifdef CONFIG_CACHE_L2X0 - /* - * for l2x0_init() - * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000 - */ - { - .virtual = 0xf0002000, - .pfn = __phys_to_pfn(0xf0100000), - .length = PAGE_SIZE, - .type = MT_DEVICE_NONSHARED - }, -#endif /* * for FPGA (0x1800000-0x19ffffff) * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000 @@ -364,11 +342,8 @@ static struct map_desc bonito_io_desc[] __initdata = { static void __init bonito_map_io(void) { + r8a7740_map_io(); iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc)); - - /* setup early devices and console here as well */ - r8a7740_add_early_devices(); - shmobile_setup_console(); } /* @@ -492,7 +467,7 @@ static void __init bonito_init(void) } } -static void __init bonito_timer_init(void) +static void __init bonito_earlytimer_init(void) { u16 val; u8 md_ck = 0; @@ -507,17 +482,22 @@ static void __init bonito_timer_init(void) md_ck |= MD_CK0; r8a7740_clock_init(md_ck); - shmobile_timer.init(); + shmobile_earlytimer_init(); } -struct sys_timer bonito_timer = { - .init = bonito_timer_init, -}; +void __init bonito_add_early_devices(void) +{ + r8a7740_add_early_devices(); + + /* override timer setup with board-specific code */ + shmobile_timer.init = bonito_earlytimer_init; +} MACHINE_START(BONITO, "bonito") .map_io = bonito_map_io, + .init_early = bonito_add_early_devices, .init_irq = r8a7740_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = bonito_init, - .timer = &bonito_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index 72d557281b1f..b627e89037f5 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -37,8 +37,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> /* * IrDA @@ -246,27 +244,6 @@ static struct platform_device *g3evm_devices[] __initdata = { &irda_device, }; -static struct map_desc g3evm_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init g3evm_map_io(void) -{ - iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc)); - - /* setup early devices and console here as well */ - sh7367_add_early_devices(); - shmobile_setup_console(); -} - static void __init g3evm_init(void) { sh7367_pinmux_init(); @@ -354,20 +331,11 @@ static void __init g3evm_init(void) platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices)); } -static void __init g3evm_timer_init(void) -{ - sh7367_clock_init(); - shmobile_timer.init(); -} - -static struct sys_timer g3evm_timer = { - .init = g3evm_timer_init, -}; - MACHINE_START(G3EVM, "g3evm") - .map_io = g3evm_map_io, + .map_io = sh7367_map_io, + .init_early = sh7367_add_early_devices, .init_irq = sh7367_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = g3evm_init, - .timer = &g3evm_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 2220b885cff5..46d757d2759d 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -38,8 +38,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> /* * SDHI @@ -260,27 +258,6 @@ static struct platform_device *g4evm_devices[] __initdata = { &sdhi1_device, }; -static struct map_desc g4evm_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init g4evm_map_io(void) -{ - iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); - - /* setup early devices and console here as well */ - sh7377_add_early_devices(); - shmobile_setup_console(); -} - #define GPIO_SDHID0_D0 0xe60520fc #define GPIO_SDHID0_D1 0xe60520fd #define GPIO_SDHID0_D2 0xe60520fe @@ -397,20 +374,11 @@ static void __init g4evm_init(void) platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); } -static void __init g4evm_timer_init(void) -{ - sh7377_clock_init(); - shmobile_timer.init(); -} - -static struct sys_timer g4evm_timer = { - .init = g4evm_timer_init, -}; - MACHINE_START(G4EVM, "g4evm") - .map_io = g4evm_map_io, + .map_io = sh7377_map_io, + .init_early = sh7377_add_early_devices, .init_irq = sh7377_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = g4evm_init, - .timer = &g4evm_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index c8e7ca23fc06..61c067294660 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -43,7 +43,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -409,27 +408,6 @@ static struct platform_device *kota2_devices[] __initdata = { &sdhi1_device, }; -static struct map_desc kota2_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init kota2_map_io(void) -{ - iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc)); - - /* setup early devices and console here as well */ - sh73a0_add_early_devices(); - shmobile_setup_console(); -} - static void __init kota2_init(void) { sh73a0_pinmux_init(); @@ -535,22 +513,12 @@ static void __init kota2_init(void) platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices)); } -static void __init kota2_timer_init(void) -{ - sh73a0_clock_init(); - shmobile_timer.init(); - return; -} - -struct sys_timer kota2_timer = { - .init = kota2_timer_init, -}; - MACHINE_START(KOTA2, "kota2") - .map_io = kota2_map_io, + .map_io = sh73a0_map_io, + .init_early = sh73a0_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = gic_handle_irq, .init_machine = kota2_init, - .timer = &kota2_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7b53cda41851..ca609502d6cd 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -57,8 +57,6 @@ #include <mach/sh7372.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> #include <asm/mach-types.h> /* @@ -318,8 +316,14 @@ static struct sh_mobile_meram_info mackerel_meram_info = { static struct resource meram_resources[] = { [0] = { - .name = "MERAM", + .name = "regs", .start = 0xe8000000, + .end = 0xe807ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "meram", + .start = 0xe8080000, .end = 0xe81fffff, .flags = IORESOURCE_MEM, }, @@ -351,29 +355,23 @@ static struct fb_videomode mackerel_lcdc_modes[] = { }, }; -static int mackerel_set_brightness(void *board_data, int brightness) +static int mackerel_set_brightness(int brightness) { gpio_set_value(GPIO_PORT31, brightness); return 0; } -static int mackerel_get_brightness(void *board_data) +static int mackerel_get_brightness(void) { return gpio_get_value(GPIO_PORT31); } -static struct sh_mobile_meram_cfg lcd_meram_cfg = { +static const struct sh_mobile_meram_cfg lcd_meram_cfg = { .icb[0] = { - .marker_icb = 28, - .cache_icb = 24, - .meram_offset = 0x0, .meram_size = 0x40, }, .icb[1] = { - .marker_icb = 29, - .cache_icb = 25, - .meram_offset = 0x40, .meram_size = 0x40, }, }; @@ -384,20 +382,20 @@ static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .fourcc = V4L2_PIX_FMT_RGB565, - .lcd_cfg = mackerel_lcdc_modes, - .num_cfg = ARRAY_SIZE(mackerel_lcdc_modes), + .lcd_modes = mackerel_lcdc_modes, + .num_modes = ARRAY_SIZE(mackerel_lcdc_modes), .interface_type = RGB24, .clock_divider = 3, .flags = 0, - .lcd_size_cfg.width = 152, - .lcd_size_cfg.height = 91, - .board_cfg = { - .set_brightness = mackerel_set_brightness, - .get_brightness = mackerel_get_brightness, + .panel_cfg = { + .width = 152, + .height = 91, }, .bl_info = { .name = "sh_mobile_lcdc_bl", .max_brightness = 1, + .set_brightness = mackerel_set_brightness, + .get_brightness = mackerel_get_brightness, }, .meram_cfg = &lcd_meram_cfg, } @@ -426,21 +424,44 @@ static struct platform_device lcdc_device = { }, }; -static struct sh_mobile_meram_cfg hdmi_meram_cfg = { +/* HDMI */ +static struct sh_mobile_hdmi_info hdmi_info = { + .flags = HDMI_SND_SRC_SPDIF, +}; + +static struct resource hdmi_resources[] = { + [0] = { + .name = "HDMI", + .start = 0xe6be0000, + .end = 0xe6be00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ + .start = evt2irq(0x17e0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device hdmi_device = { + .name = "sh-mobile-hdmi", + .num_resources = ARRAY_SIZE(hdmi_resources), + .resource = hdmi_resources, + .id = -1, + .dev = { + .platform_data = &hdmi_info, + }, +}; + +static const struct sh_mobile_meram_cfg hdmi_meram_cfg = { .icb[0] = { - .marker_icb = 30, - .cache_icb = 26, - .meram_offset = 0x80, .meram_size = 0x100, }, .icb[1] = { - .marker_icb = 31, - .cache_icb = 27, - .meram_offset = 0x180, .meram_size = 0x100, }, }; -/* HDMI */ + static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .meram_dev = &mackerel_meram_info, .clock_source = LCDC_CLK_EXTERNAL, @@ -451,6 +472,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, .meram_cfg = &hdmi_meram_cfg, + .tx_dev = &hdmi_device, } }; @@ -478,36 +500,6 @@ static struct platform_device hdmi_lcdc_device = { }, }; -static struct sh_mobile_hdmi_info hdmi_info = { - .lcd_chan = &hdmi_lcdc_info.ch[0], - .lcd_dev = &hdmi_lcdc_device.dev, - .flags = HDMI_SND_SRC_SPDIF, -}; - -static struct resource hdmi_resources[] = { - [0] = { - .name = "HDMI", - .start = 0xe6be0000, - .end = 0xe6be00ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ - .start = evt2irq(0x17e0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device hdmi_device = { - .name = "sh-mobile-hdmi", - .num_resources = ARRAY_SIZE(hdmi_resources), - .resource = hdmi_resources, - .id = -1, - .dev = { - .platform_data = &hdmi_info, - }, -}; - static struct platform_device fsi_hdmi_device = { .name = "sh_fsi2_b_hdmi", }; @@ -860,7 +852,7 @@ static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) return clk_enable(clk); } -static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +static int fsi_b_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; struct clk *fdiv_clk = &sh7372_fsidivb_clk; @@ -869,10 +861,6 @@ static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) int ackmd_bpfmd; int ret; - /* FSIA is slave mode. nothing to do here */ - if (is_porta) - return 0; - /* clock start */ switch (rate) { case 44100: @@ -916,14 +904,16 @@ fsi_set_rate_end: } static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV, - - .portb_flags = SH_FSI_BRS_INV | + .port_a = { + .flags = SH_FSI_BRS_INV, + }, + .port_b = { + .flags = SH_FSI_BRS_INV | SH_FSI_BRM_INV | SH_FSI_LRS_INV | SH_FSI_FMT_SPDIF, - - .set_rate = fsi_set_rate, + .set_rate = fsi_b_set_rate, + } }; static struct resource fsi_resources[] = { @@ -1276,8 +1266,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &sh_mmcif_device, &ceu_device, &mackerel_camera, - &hdmi_lcdc_device, &hdmi_device, + &hdmi_lcdc_device, &meram_device, }; @@ -1337,31 +1327,6 @@ static struct i2c_board_info i2c1_devices[] = { }, }; -static struct map_desc mackerel_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init mackerel_map_io(void) -{ - iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc)); - /* DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't - * enough to allocate the frame buffer memory. - */ - init_consistent_dma_size(12 << 20); - - /* setup early devices and console here as well */ - sh7372_add_early_devices(); - shmobile_setup_console(); -} - #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A #define GPIO_PORT167CR 0xE60520A7 @@ -1374,6 +1339,9 @@ static void __init mackerel_init(void) struct clk *clk; int ret; + /* External clock source */ + clk_set_rate(&sh7372_dv_clki_clk, 27000000); + sh7372_pinmux_init(); /* enable SCIFA0 */ @@ -1577,23 +1545,11 @@ static void __init mackerel_init(void) pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } -static void __init mackerel_timer_init(void) -{ - sh7372_clock_init(); - shmobile_timer.init(); - - /* External clock source */ - clk_set_rate(&sh7372_dv_clki_clk, 27000000); -} - -static struct sys_timer mackerel_timer = { - .init = mackerel_timer_init, -}; - MACHINE_START(MACKEREL, "mackerel") - .map_io = mackerel_map_io, + .map_io = sh7372_map_io, + .init_early = sh7372_add_early_devices, .init_irq = sh7372_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = mackerel_init, - .timer = &mackerel_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index f0e02c0ce99f..cbd5e4cd06d2 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -33,8 +33,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/hardware/gic.h> #include <asm/traps.h> @@ -72,49 +70,6 @@ static struct platform_device *marzen_devices[] __initdata = { ð_device, }; -static struct map_desc marzen_io_desc[] __initdata = { - /* 2M entity map for 0xf0000000 (MPCORE) */ - { - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0xf0000000), - .length = SZ_2M, - .type = MT_DEVICE_NONSHARED - }, - /* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */ - { - .virtual = 0xfe000000, - .pfn = __phys_to_pfn(0xfe000000), - .length = SZ_16M, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init marzen_map_io(void) -{ - iotable_init(marzen_io_desc, ARRAY_SIZE(marzen_io_desc)); -} - -static void __init marzen_init_early(void) -{ - r8a7779_add_early_devices(); - - /* Early serial console setup is not included here due to - * memory map collisions. The SCIF serial ports in r8a7779 - * are difficult to entity map 1:1 due to collision with the - * virtual memory range used by the coherent DMA code on ARM. - * - * Anyone wanting to debug early can remove UPF_IOREMAP from - * the sh-sci serial console platform data, adjust mapbase - * to a static M:N virt:phys mapping that needs to be added to - * the mappings passed with iotable_init() above. - * - * Then add a call to shmobile_setup_console() from this function. - * - * As a final step pass earlyprint=sh-sci.2,115200 on the kernel - * command line. - */ -} - static void __init marzen_init(void) { r8a7779_pinmux_init(); @@ -135,23 +90,12 @@ static void __init marzen_init(void) platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); } -static void __init marzen_timer_init(void) -{ - r8a7779_clock_init(); - shmobile_timer.init(); - return; -} - -struct sys_timer marzen_timer = { - .init = marzen_timer_init, -}; - MACHINE_START(MARZEN, "marzen") - .map_io = marzen_map_io, - .init_early = marzen_init_early, + .map_io = r8a7779_map_io, + .init_early = r8a7779_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = r8a7779_init_irq, .handle_irq = gic_handle_irq, .init_machine = marzen_init, - .timer = &marzen_timer, + .timer = &shmobile_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 3b35b9afc001..99c4d743a99c 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -93,7 +93,7 @@ static unsigned long div_recalc(struct clk *clk) return clk->parent->rate / (int)(clk->priv); } -static struct clk_ops div_clk_ops = { +static struct sh_clk_ops div_clk_ops = { .recalc = div_recalc, }; @@ -125,7 +125,7 @@ static struct clk extal2_div2_clk = { .parent = &extal2_clk, }; -static struct clk_ops followparent_clk_ops = { +static struct sh_clk_ops followparent_clk_ops = { .recalc = followparent_recalc, }; @@ -156,7 +156,7 @@ static unsigned long pllc01_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc01_clk_ops = { +static struct sh_clk_ops pllc01_clk_ops = { .recalc = pllc01_recalc, }; @@ -376,7 +376,7 @@ void __init r8a7740_clock_init(u8 md_ck) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup r8a7740 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index b4b0e8cd096d..7d6e9fe47b56 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -107,7 +107,7 @@ static unsigned long mul4_recalc(struct clk *clk) return clk->parent->rate * 4; } -static struct clk_ops mul4_clk_ops = { +static struct sh_clk_ops mul4_clk_ops = { .recalc = mul4_recalc, }; @@ -170,7 +170,7 @@ void __init r8a7779_clock_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup r8a7779 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c index 5218c34a9cc6..006e7b5d304c 100644 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -74,7 +74,7 @@ static unsigned long div2_recalc(struct clk *clk) return clk->parent->rate / 2; } -static struct clk_ops div2_clk_ops = { +static struct sh_clk_ops div2_clk_ops = { .recalc = div2_recalc, }; @@ -101,7 +101,7 @@ static unsigned long pllc1_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc1_clk_ops = { +static struct sh_clk_ops pllc1_clk_ops = { .recalc = pllc1_recalc, }; @@ -128,7 +128,7 @@ static unsigned long pllc2_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc2_clk_ops = { +static struct sh_clk_ops pllc2_clk_ops = { .recalc = pllc2_recalc, }; @@ -349,7 +349,7 @@ void __init sh7367_clock_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup sh7367 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 293456d8dcfd..de243e3c8392 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -89,7 +89,7 @@ static unsigned long div2_recalc(struct clk *clk) return clk->parent->rate / 2; } -static struct clk_ops div2_clk_ops = { +static struct sh_clk_ops div2_clk_ops = { .recalc = div2_recalc, }; @@ -128,7 +128,7 @@ static unsigned long pllc01_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc01_clk_ops = { +static struct sh_clk_ops pllc01_clk_ops = { .recalc = pllc01_recalc, }; @@ -276,7 +276,7 @@ static int pllc2_set_parent(struct clk *clk, struct clk *parent) return 0; } -static struct clk_ops pllc2_clk_ops = { +static struct sh_clk_ops pllc2_clk_ops = { .recalc = pllc2_recalc, .round_rate = pllc2_round_rate, .set_rate = pllc2_set_rate, @@ -468,7 +468,7 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate) return 0; } -static struct clk_ops fsidiv_clk_ops = { +static struct sh_clk_ops fsidiv_clk_ops = { .recalc = fsidiv_recalc, .round_rate = fsidiv_round_rate, .set_rate = fsidiv_set_rate, @@ -710,7 +710,7 @@ void __init sh7372_clock_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup sh7372 clocks\n"); diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c index 8cee7b151ae3..0798a15936c3 100644 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ b/arch/arm/mach-shmobile/clock-sh7377.c @@ -77,7 +77,7 @@ static unsigned long div2_recalc(struct clk *clk) return clk->parent->rate / 2; } -static struct clk_ops div2_clk_ops = { +static struct sh_clk_ops div2_clk_ops = { .recalc = div2_recalc, }; @@ -110,7 +110,7 @@ static unsigned long pllc1_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc1_clk_ops = { +static struct sh_clk_ops pllc1_clk_ops = { .recalc = pllc1_recalc, }; @@ -137,7 +137,7 @@ static unsigned long pllc2_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pllc2_clk_ops = { +static struct sh_clk_ops pllc2_clk_ops = { .recalc = pllc2_recalc, }; @@ -360,7 +360,7 @@ void __init sh7377_clock_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup sh7377 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 7727cca6136c..472d1f5361e5 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -88,7 +88,7 @@ static unsigned long div2_recalc(struct clk *clk) return clk->parent->rate / 2; } -static struct clk_ops div2_clk_ops = { +static struct sh_clk_ops div2_clk_ops = { .recalc = div2_recalc, }; @@ -97,7 +97,7 @@ static unsigned long div7_recalc(struct clk *clk) return clk->parent->rate / 7; } -static struct clk_ops div7_clk_ops = { +static struct sh_clk_ops div7_clk_ops = { .recalc = div7_recalc, }; @@ -106,7 +106,7 @@ static unsigned long div13_recalc(struct clk *clk) return clk->parent->rate / 13; } -static struct clk_ops div13_clk_ops = { +static struct sh_clk_ops div13_clk_ops = { .recalc = div13_recalc, }; @@ -122,7 +122,7 @@ static struct clk extal2_div2_clk = { .parent = &sh73a0_extal2_clk, }; -static struct clk_ops main_clk_ops = { +static struct sh_clk_ops main_clk_ops = { .recalc = followparent_recalc, }; @@ -156,7 +156,7 @@ static unsigned long pll_recalc(struct clk *clk) return clk->parent->rate * mult; } -static struct clk_ops pll_clk_ops = { +static struct sh_clk_ops pll_clk_ops = { .recalc = pll_recalc, }; @@ -438,7 +438,7 @@ static int dsiphy_set_rate(struct clk *clk, unsigned long rate) return 0; } -static struct clk_ops dsiphy_clk_ops = { +static struct sh_clk_ops dsiphy_clk_ops = { .recalc = dsiphy_recalc, .round_rate = dsiphy_round_rate, .set_rate = dsiphy_set_rate, @@ -620,7 +620,7 @@ void __init sh73a0_clock_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) - clk_init(); + shmobile_clk_init(); else panic("failed to setup sh73a0 clocks\n"); } diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index 31654d78b96b..e816ca9bd213 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -24,7 +24,7 @@ #include <linux/sh_clk.h> #include <linux/export.h> -int __init clk_init(void) +int __init shmobile_clk_init(void) { /* Kick the child clocks.. */ recalculate_root_clocks(); diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c index 1b2334277e85..21b09b6455e4 100644 --- a/arch/arm/mach-shmobile/cpuidle.c +++ b/arch/arm/mach-shmobile/cpuidle.c @@ -13,7 +13,6 @@ #include <linux/suspend.h> #include <linux/module.h> #include <linux/err.h> -#include <asm/system.h> #include <asm/io.h> static void shmobile_enter_wfi(void) diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index e4b945e271e7..83ad3fe0a75f 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -1,12 +1,15 @@ #ifndef __ARCH_MACH_COMMON_H #define __ARCH_MACH_COMMON_H +extern void shmobile_earlytimer_init(void); extern struct sys_timer shmobile_timer; +struct twd_local_timer; +void shmobile_twd_init(struct twd_local_timer *twd_local_timer); extern void shmobile_setup_console(void); extern void shmobile_secondary_vector(void); extern int shmobile_platform_cpu_kill(unsigned int cpu); struct clk; -extern int clk_init(void); +extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); extern struct platform_suspend_ops shmobile_suspend_ops; struct cpuidle_driver; @@ -14,6 +17,7 @@ extern void (*shmobile_cpuidle_modes[])(void); extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv); extern void sh7367_init_irq(void); +extern void sh7367_map_io(void); extern void sh7367_add_early_devices(void); extern void sh7367_add_standard_devices(void); extern void sh7367_clock_init(void); @@ -22,6 +26,7 @@ extern struct clk sh7367_extalb1_clk; extern struct clk sh7367_extal2_clk; extern void sh7377_init_irq(void); +extern void sh7377_map_io(void); extern void sh7377_add_early_devices(void); extern void sh7377_add_standard_devices(void); extern void sh7377_clock_init(void); @@ -30,6 +35,7 @@ extern struct clk sh7377_extalc1_clk; extern struct clk sh7377_extal2_clk; extern void sh7372_init_irq(void); +extern void sh7372_map_io(void); extern void sh7372_add_early_devices(void); extern void sh7372_add_standard_devices(void); extern void sh7372_clock_init(void); @@ -41,6 +47,7 @@ extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal2_clk; extern void sh73a0_init_irq(void); +extern void sh73a0_map_io(void); extern void sh73a0_add_early_devices(void); extern void sh73a0_add_standard_devices(void); extern void sh73a0_clock_init(void); @@ -56,12 +63,14 @@ extern int sh73a0_boot_secondary(unsigned int cpu); extern void sh73a0_smp_prepare_cpus(void); extern void r8a7740_init_irq(void); +extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); extern void r8a7740_add_standard_devices(void); extern void r8a7740_clock_init(u8 md_ck); extern void r8a7740_pinmux_init(void); extern void r8a7779_init_irq(void); +extern void r8a7779_map_io(void); extern void r8a7779_add_early_devices(void); extern void r8a7779_add_standard_devices(void); extern void r8a7779_clock_init(void); diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S deleted file mode 100644 index 2a57b2964ee9..000000000000 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2010 Paul Mundt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h index 956ac18ddbf9..540eaff08f34 100644 --- a/arch/arm/mach-shmobile/include/mach/system.h +++ b/arch/arm/mach-shmobile/include/mach/system.h @@ -1,10 +1,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -static inline void arch_idle(void) -{ - cpu_do_idle(); -} +#include <asm/system_misc.h> static inline void arch_reset(char mode, const char *cmd) { diff --git a/arch/arm/mach-shmobile/localtimer.c b/arch/arm/mach-shmobile/localtimer.c deleted file mode 100644 index ad9ccc9900c8..000000000000 --- a/arch/arm/mach-shmobile/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * SMP support for R-Mobile / SH-Mobile - local timer portion - * - * Copyright (C) 2010 Magnus Damm - * - * Based on vexpress, Copyright (C) 2002 ARM Ltd, All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/clockchips.h> -#include <asm/smp_twd.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = 29; - twd_timer_setup(evt); - return 0; -} diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 993381257f69..45fa3924c6a1 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -17,7 +17,6 @@ #include <linux/smp.h> #include <linux/io.h> #include <asm/hardware/gic.h> -#include <asm/localtimer.h> #include <asm/mach-types.h> #include <mach/common.h> diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index c38ba7b43ef8..a18a4ae16d2b 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c @@ -18,7 +18,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/console.h> -#include <asm/system.h> #include <asm/io.h> #include <mach/common.h> #include <mach/r8a7779.h> diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index fcf8b1761aef..a3bdb12acde9 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -21,7 +21,6 @@ #include <linux/irq.h> #include <linux/bitrev.h> #include <linux/console.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/tlbflush.h> #include <asm/suspend.h> diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 986dca6b3fad..74e52341dd1b 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -25,8 +25,41 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <mach/r8a7740.h> +#include <mach/common.h> #include <asm/mach-types.h> +#include <asm/mach/map.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> + +static struct map_desc r8a7740_io_desc[] __initdata = { + /* + * for CPGA/INTC/PFC + * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 160 << 20, + .type = MT_DEVICE_NONSHARED + }, +#ifdef CONFIG_CACHE_L2X0 + /* + * for l2x0_init() + * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000 + */ + { + .virtual = 0xf0002000, + .pfn = __phys_to_pfn(0xf0100000), + .length = PAGE_SIZE, + .type = MT_DEVICE_NONSHARED + }, +#endif +}; + +void __init r8a7740_map_io(void) +{ + iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); +} /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { @@ -345,8 +378,20 @@ void __init r8a7740_add_standard_devices(void) ARRAY_SIZE(r8a7740_late_devices)); } +static void __init r8a7740_earlytimer_init(void) +{ + r8a7740_clock_init(0); + shmobile_earlytimer_init(); +} + void __init r8a7740_add_early_devices(void) { early_platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = r8a7740_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 4725663bd032..6820d785493d 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -33,6 +33,31 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <asm/hardware/cache-l2x0.h> + +static struct map_desc r8a7779_io_desc[] __initdata = { + /* 2M entity map for 0xf0000000 (MPCORE) */ + { + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(0xf0000000), + .length = SZ_2M, + .type = MT_DEVICE_NONSHARED + }, + /* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */ + { + .virtual = 0xfe000000, + .pfn = __phys_to_pfn(0xfe000000), + .length = SZ_16M, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init r8a7779_map_io(void) +{ + iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc)); +} static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe40000, @@ -219,6 +244,10 @@ static struct platform_device *r8a7779_late_devices[] __initdata = { void __init r8a7779_add_standard_devices(void) { +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 64K*16way */ + l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff); +#endif r8a7779_pm_init(); r8a7779_init_pm_domain(&r8a7779_sh4a); @@ -232,8 +261,33 @@ void __init r8a7779_add_standard_devices(void) ARRAY_SIZE(r8a7779_late_devices)); } +static void __init r8a7779_earlytimer_init(void) +{ + r8a7779_clock_init(); + shmobile_earlytimer_init(); +} + void __init r8a7779_add_early_devices(void) { early_platform_add_devices(r8a7779_early_devices, ARRAY_SIZE(r8a7779_early_devices)); + + /* Early serial console setup is not included here due to + * memory map collisions. The SCIF serial ports in r8a7779 + * are difficult to entity map 1:1 due to collision with the + * virtual memory range used by the coherent DMA code on ARM. + * + * Anyone wanting to debug early can remove UPF_IOREMAP from + * the sh-sci serial console platform data, adjust mapbase + * to a static M:N virt:phys mapping that needs to be added to + * the mappings passed with iotable_init() above. + * + * Then add a call to shmobile_setup_console() from this function. + * + * As a final step pass earlyprint=sh-sci.2,115200 on the kernel + * command line in case of the marzen board. + */ + + /* override timer setup with soc-specific code */ + shmobile_timer.init = r8a7779_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c index e546017f15de..a51e1a1e6996 100644 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -29,8 +29,28 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <mach/hardware.h> +#include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +static struct map_desc sh7367_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init sh7367_map_io(void) +{ + iotable_init(sh7367_io_desc, ARRAY_SIZE(sh7367_io_desc)); +} /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { @@ -435,6 +455,12 @@ void __init sh7367_add_standard_devices(void) ARRAY_SIZE(sh7367_devices)); } +static void __init sh7367_earlytimer_init(void) +{ + sh7367_clock_init(); + shmobile_earlytimer_init(); +} + #define SYMSTPCR2 0xe6158048 #define SYMSTPCR2_CMT1 (1 << 29) @@ -445,4 +471,10 @@ void __init sh7367_add_early_devices(void) early_platform_add_devices(sh7367_early_devices, ARRAY_SIZE(sh7367_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = sh7367_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index cccf91b8fae1..4e818b7de781 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -31,10 +31,37 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <linux/pm_domain.h> +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/sh7372.h> +#include <mach/common.h> +#include <asm/mach/map.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> + +static struct map_desc sh7372_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init sh7372_map_io(void) +{ + iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc)); + + /* + * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't + * enough to allocate the frame buffer memory. + */ + init_consistent_dma_size(12 << 20); +} /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { @@ -1047,8 +1074,20 @@ void __init sh7372_add_standard_devices(void) sh7372_add_device_to_domain(&sh7372_a4r, &tmu01_device); } +static void __init sh7372_earlytimer_init(void) +{ + sh7372_clock_init(); + shmobile_earlytimer_init(); +} + void __init sh7372_add_early_devices(void) { early_platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = sh7372_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c index bb405b8e459b..9f146095098b 100644 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ b/arch/arm/mach-shmobile/setup-sh7377.c @@ -30,8 +30,28 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <mach/hardware.h> +#include <mach/common.h> +#include <asm/mach/map.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> + +static struct map_desc sh7377_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init sh7377_map_io(void) +{ + iotable_init(sh7377_io_desc, ARRAY_SIZE(sh7377_io_desc)); +} /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { @@ -456,6 +476,12 @@ void __init sh7377_add_standard_devices(void) ARRAY_SIZE(sh7377_devices)); } +static void __init sh7377_earlytimer_init(void) +{ + sh7377_clock_init(); + shmobile_earlytimer_init(); +} + #define SMSTPCR3 0xe615013c #define SMSTPCR3_CMT1 (1 << 29) @@ -466,4 +492,10 @@ void __init sh7377_add_early_devices(void) early_platform_add_devices(sh7377_early_devices, ARRAY_SIZE(sh7377_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = sh7377_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 20e71e5cace4..b6a0734a738e 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -32,8 +32,28 @@ #include <linux/sh_timer.h> #include <mach/hardware.h> #include <mach/sh73a0.h> +#include <mach/common.h> #include <asm/mach-types.h> +#include <asm/mach/map.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> + +static struct map_desc sh73a0_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +void __init sh73a0_map_io(void) +{ + iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc)); +} static struct plat_sci_port scif0_platform_data = { .mapbase = 0xe6c40000, @@ -667,8 +687,20 @@ void __init sh73a0_add_standard_devices(void) ARRAY_SIZE(sh73a0_late_devices)); } +static void __init sh73a0_earlytimer_init(void) +{ + sh73a0_clock_init(); + shmobile_earlytimer_init(); +} + void __init sh73a0_add_early_devices(void) { early_platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); + + /* override timer setup with soc-specific code */ + shmobile_timer.init = sh73a0_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 4fe2e9eaf501..9bb7b8575a1f 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -64,6 +64,8 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(scu_lock); static unsigned long tmp; +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); + static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) { void __iomem *scu_base = scu_base_addr(); @@ -82,11 +84,7 @@ unsigned int __init r8a7779_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); -#ifdef CONFIG_HAVE_ARM_TWD - /* twd_base needs to be initialized before percpu_timer_setup() */ - twd_base = (void __iomem *)0xf0000600; -#endif - + shmobile_twd_init(&twd_local_timer); return scu_get_core_count(scu_base); } diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 2d0d4212be41..c0a9093ba3a8 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -42,6 +42,8 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(scu_lock); static unsigned long tmp; +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); + static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) { void __iomem *scu_base = scu_base_addr(); @@ -60,11 +62,7 @@ unsigned int __init sh73a0_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); -#ifdef CONFIG_HAVE_ARM_TWD - /* twd_base needs to be initialized before percpu_timer_setup() */ - twd_base = (void __iomem *)0xf0000600; -#endif - + shmobile_twd_init(&twd_local_timer); return scu_get_core_count(scu_base); } diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c index c1febe13f709..4d1b86a49923 100644 --- a/arch/arm/mach-shmobile/suspend.c +++ b/arch/arm/mach-shmobile/suspend.c @@ -12,8 +12,8 @@ #include <linux/suspend.h> #include <linux/module.h> #include <linux/err.h> -#include <asm/system.h> #include <asm/io.h> +#include <asm/system_misc.h> static int shmobile_suspend_default_enter(suspend_state_t suspend_state) { diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 895794b543cd..2fba5f3d1c8a 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -20,6 +20,7 @@ */ #include <linux/platform_device.h> #include <asm/mach/time.h> +#include <asm/smp_twd.h> static void __init shmobile_late_time_init(void) { @@ -36,11 +37,24 @@ static void __init shmobile_late_time_init(void) early_platform_driver_probe("earlytimer", 2, 0); } -static void __init shmobile_timer_init(void) +void __init shmobile_earlytimer_init(void) { late_time_init = shmobile_late_time_init; } +static void __init shmobile_timer_init(void) +{ +} + +void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer) +{ +#ifdef CONFIG_HAVE_ARM_TWD + int err = twd_local_timer_register(twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); +#endif +} + struct sys_timer shmobile_timer = { .init = shmobile_timer_init, }; diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S deleted file mode 100644 index de3bb41c8e9e..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h deleted file mode 100644 index 92cee6335c90..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/system.h - * - * SPEAr3xx Machine family specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <plat/system.h> - -#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index 4f7f5182dd4d..f7db66812abb 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -430,18 +430,8 @@ static struct pl061_platform_data gpio1_plat_data = { .irq_base = SPEAR300_GPIO1_INT_BASE, }; -struct amba_device spear300_gpio1_device = { - .dev = { - .init_name = "gpio1", - .platform_data = &gpio1_plat_data, - }, - .res = { - .start = SPEAR300_GPIO_BASE, - .end = SPEAR300_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, + {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); /* spear300 routines */ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 10af45da86a0..b1733c37f209 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -28,31 +28,12 @@ static struct pl061_platform_data gpio_plat_data = { .irq_base = SPEAR3XX_GPIO_INT_BASE, }; -struct amba_device spear3xx_gpio_device = { - .dev = { - .init_name = "gpio", - .platform_data = &gpio_plat_data, - }, - .res = { - .start = SPEAR3XX_ICM3_GPIO_BASE, - .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE, + {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data); /* uart device registration */ -struct amba_device spear3xx_uart_device = { - .dev = { - .init_name = "uart", - }, - .res = { - .start = SPEAR3XX_ICM1_UART_BASE, - .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR3XX_IRQ_UART, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE, + {SPEAR3XX_IRQ_UART}, NULL); /* Do spear3xx familiy common initialization part here */ void __init spear3xx_init(void) diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig index ff4ae5ba00f1..fbe298bd1d92 100644 --- a/arch/arm/mach-spear6xx/Kconfig +++ b/arch/arm/mach-spear6xx/Kconfig @@ -5,11 +5,12 @@ if ARCH_SPEAR6XX menu "SPEAr6xx Implementations" -config BOARD_SPEAR600_EVB - bool "SPEAr600 Evaluation Board" +config BOARD_SPEAR600_DT + bool "SPEAr600 generic board configured via device-tree" select MACH_SPEAR600 + select USE_OF help - Supports ST SPEAr600 Evaluation Board + Supports ST SPEAr600 boards configured via the device-tree endmenu diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile index cc1a4d82d459..76e5750552fc 100644 --- a/arch/arm/mach-spear6xx/Makefile +++ b/arch/arm/mach-spear6xx/Makefile @@ -4,9 +4,3 @@ # common files obj-y += clock.o spear6xx.o - -# spear600 specific files -obj-$(CONFIG_MACH_SPEAR600) += spear600.o - -# spear600 boards files -obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index ac70e0d88fef..358f2800f17b 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -641,8 +641,8 @@ static struct clk_lookup spear_clk_lookups[] = { { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk}, - { .dev_id = "uart0", .clk = &uart0_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, + { .dev_id = "d0000000.serial", .clk = &uart0_clk}, + { .dev_id = "d0080000.serial", .clk = &uart1_clk}, { .dev_id = "firda", .clk = &firda_clk}, { .dev_id = "clcd", .clk = &clcd_clk}, { .dev_id = "gpt0", .clk = &gpt0_clk}, @@ -655,20 +655,20 @@ static struct clk_lookup spear_clk_lookups[] = { { .con_id = "usbh.1_clk", .clk = &usbh1_clk}, /* clock derived from ahb clk */ { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "i2c_designware.0", .clk = &i2c_clk}, + { .dev_id = "d0200000.i2c", .clk = &i2c_clk}, { .dev_id = "dma", .clk = &dma_clk}, { .dev_id = "jpeg", .clk = &jpeg_clk}, { .dev_id = "gmac", .clk = &gmac_clk}, { .dev_id = "smi", .clk = &smi_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, + { .dev_id = "fsmc-nand", .clk = &fsmc_clk}, /* clock derived from apb clk */ { .dev_id = "adc", .clk = &adc_clk}, { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "gpio0", .clk = &gpio0_clk}, - { .dev_id = "gpio1", .clk = &gpio1_clk}, - { .dev_id = "gpio2", .clk = &gpio2_clk}, + { .dev_id = "f0100000.gpio", .clk = &gpio0_clk}, + { .dev_id = "fc980000.gpio", .clk = &gpio1_clk}, + { .dev_id = "d8100000.gpio", .clk = &gpio2_clk}, }; void __init spear6xx_clk_init(void) diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S deleted file mode 100644 index d490a910d925..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h deleted file mode 100644 index 0b1d2be81cfb..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/system.h - * - * SPEAr6xx Machine family specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <plat/system.h> - -#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c deleted file mode 100644 index d0e6eeae9b04..000000000000 --- a/arch/arm/mach-spear6xx/spear600.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-spear6xx/spear600.c - * - * SPEAr600 machine source file - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/ptrace.h> -#include <asm/irq.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -/* Add spear600 specific devices here */ - -void __init spear600_init(void) -{ - /* call spear6xx family common init function */ - spear6xx_init(); -} diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c deleted file mode 100644 index c6e4254741cc..000000000000 --- a/arch/arm/mach-spear6xx/spear600_evb.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-spear6xx/spear600_evb.c - * - * SPEAr600 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/vic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -static struct amba_device *amba_devs[] __initdata = { - &gpio_device[0], - &gpio_device[1], - &gpio_device[2], - &uart_device[0], - &uart_device[1], -}; - -static struct platform_device *plat_devs[] __initdata = { -}; - -static void __init spear600_evb_init(void) -{ - unsigned int i; - - /* call spear600 machine init function */ - spear600_init(); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR600, "ST-SPEAR600-EVB") - .atag_offset = 0x100, - .map_io = spear6xx_map_io, - .init_irq = spear6xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear6xx_timer, - .init_machine = spear600_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index e0f6628c8b2c..2ed8b14c82c8 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -6,111 +6,21 @@ * Copyright (C) 2009 ST Microelectronics * Rajeev Kumar<rajeev-dlh.kumar@st.com> * + * Copyright 2012 Stefan Roese <sr@denx.de> + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/types.h> -#include <linux/amba/pl061.h> -#include <linux/ptrace.h> -#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> #include <asm/hardware/vic.h> -#include <asm/irq.h> #include <asm/mach/arch.h> #include <mach/generic.h> #include <mach/hardware.h> -#include <mach/irqs.h> - -/* Add spear6xx machines common devices here */ -/* uart device registration */ -struct amba_device uart_device[] = { - { - .dev = { - .init_name = "uart0", - }, - .res = { - .start = SPEAR6XX_ICM1_UART0_BASE, - .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_UART_0, NO_IRQ}, - }, { - .dev = { - .init_name = "uart1", - }, - .res = { - .start = SPEAR6XX_ICM1_UART1_BASE, - .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_UART_1, NO_IRQ}, - } -}; - -/* gpio device registration */ -static struct pl061_platform_data gpio_plat_data[] = { - { - .gpio_base = 0, - .irq_base = SPEAR_GPIO0_INT_BASE, - }, { - .gpio_base = 8, - .irq_base = SPEAR_GPIO1_INT_BASE, - }, { - .gpio_base = 16, - .irq_base = SPEAR_GPIO2_INT_BASE, - }, -}; - -struct amba_device gpio_device[] = { - { - .dev = { - .init_name = "gpio0", - .platform_data = &gpio_plat_data[0], - }, - .res = { - .start = SPEAR6XX_CPU_GPIO_BASE, - .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_LOCAL_GPIO, NO_IRQ}, - }, { - .dev = { - .init_name = "gpio1", - .platform_data = &gpio_plat_data[1], - }, - .res = { - .start = SPEAR6XX_ICM3_GPIO_BASE, - .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_BASIC_GPIO, NO_IRQ}, - }, { - .dev = { - .init_name = "gpio2", - .platform_data = &gpio_plat_data[2], - }, - .res = { - .start = SPEAR6XX_ICM2_GPIO_BASE, - .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_APPL_GPIO, NO_IRQ}, - } -}; - -/* This will add devices, and do machine specific tasks */ -void __init spear6xx_init(void) -{ - /* nothing to do for now */ -} - -/* This will initialize vic */ -void __init spear6xx_init_irq(void) -{ - vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0); - vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0); -} /* Following will create static virtual/physical mappings */ static struct map_desc spear6xx_io_desc[] __initdata = { @@ -181,3 +91,33 @@ static void __init spear6xx_timer_init(void) struct sys_timer spear6xx_timer = { .init = spear6xx_timer_init, }; + +static void __init spear600_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *spear600_dt_board_compat[] = { + "st,spear600", + NULL +}; + +static const struct of_device_id vic_of_match[] __initconst = { + { .compatible = "arm,pl190-vic", .data = vic_of_init, }, + { /* Sentinel */ } +}; + +static void __init spear6xx_dt_init_irq(void) +{ + of_irq_init(vic_of_match); +} + +DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)") + .map_io = spear6xx_map_io, + .init_irq = spear6xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear6xx_timer, + .init_machine = spear600_dt_init, + .restart = spear_restart, + .dt_compat = spear600_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 373652d76b90..d0f2546706ca 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -7,9 +7,19 @@ config ARCH_TEGRA_2x_SOC select CPU_V7 select ARM_GIC select ARCH_REQUIRE_GPIOLIB + select PINCTRL + select PINCTRL_TEGRA20 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB_SUPPORT + select USB_ULPI if USB select USB_ULPI_VIEWPORT if USB_SUPPORT + select ARM_ERRATA_720789 + select ARM_ERRATA_742230 + select ARM_ERRATA_751472 + select ARM_ERRATA_754327 + select ARM_ERRATA_764369 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 + select CPU_FREQ_TABLE if CPU_FREQ help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -19,10 +29,18 @@ config ARCH_TEGRA_3x_SOC select CPU_V7 select ARM_GIC select ARCH_REQUIRE_GPIOLIB + select PINCTRL + select PINCTRL_TEGRA30 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB_SUPPORT + select USB_ULPI if USB select USB_ULPI_VIEWPORT if USB_SUPPORT select USE_OF + select ARM_ERRATA_743622 + select ARM_ERRATA_751472 + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 + select PL310_ERRATA_769419 if CACHE_L2X0 + select CPU_FREQ_TABLE if CPU_FREQ help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index e120ff54f663..d87d968115ec 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -7,15 +7,21 @@ obj-y += clock.o obj-y += timer.o obj-y += pinmux.o obj-y += fuse.o +obj-y += pmc.o +obj-y += flowctrl.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pinmux-tegra20-tables.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pinmux-tegra30-tables.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o -obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o +obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o apbio.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_USB_SUPPORT) += usb_phy.o diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c new file mode 100644 index 000000000000..e75451e517bd --- /dev/null +++ b/arch/arm/mach-tegra/apbio.c @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2010 NVIDIA Corporation. + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/spinlock.h> +#include <linux/completion.h> +#include <linux/sched.h> +#include <linux/mutex.h> + +#include <mach/dma.h> +#include <mach/iomap.h> + +#include "apbio.h" + +static DEFINE_MUTEX(tegra_apb_dma_lock); + +static struct tegra_dma_channel *tegra_apb_dma; +static u32 *tegra_apb_bb; +static dma_addr_t tegra_apb_bb_phys; +static DECLARE_COMPLETION(tegra_apb_wait); + +bool tegra_apb_init(void) +{ + struct tegra_dma_channel *ch; + + mutex_lock(&tegra_apb_dma_lock); + + /* Check to see if we raced to setup */ + if (tegra_apb_dma) + goto out; + + ch = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT | + TEGRA_DMA_SHARED); + + if (!ch) + goto out_fail; + + tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32), + &tegra_apb_bb_phys, GFP_KERNEL); + if (!tegra_apb_bb) { + pr_err("%s: can not allocate bounce buffer\n", __func__); + tegra_dma_free_channel(ch); + goto out_fail; + } + + tegra_apb_dma = ch; +out: + mutex_unlock(&tegra_apb_dma_lock); + return true; + +out_fail: + mutex_unlock(&tegra_apb_dma_lock); + return false; +} + +static void apb_dma_complete(struct tegra_dma_req *req) +{ + complete(&tegra_apb_wait); +} + +u32 tegra_apb_readl(unsigned long offset) +{ + struct tegra_dma_req req; + int ret; + + if (!tegra_apb_dma && !tegra_apb_init()) + return readl(IO_TO_VIRT(offset)); + + mutex_lock(&tegra_apb_dma_lock); + req.complete = apb_dma_complete; + req.to_memory = 1; + req.dest_addr = tegra_apb_bb_phys; + req.dest_bus_width = 32; + req.dest_wrap = 1; + req.source_addr = offset; + req.source_bus_width = 32; + req.source_wrap = 4; + req.req_sel = TEGRA_DMA_REQ_SEL_CNTR; + req.size = 4; + + INIT_COMPLETION(tegra_apb_wait); + + tegra_dma_enqueue_req(tegra_apb_dma, &req); + + ret = wait_for_completion_timeout(&tegra_apb_wait, + msecs_to_jiffies(50)); + + if (WARN(ret == 0, "apb read dma timed out")) { + tegra_dma_dequeue_req(tegra_apb_dma, &req); + *(u32 *)tegra_apb_bb = 0; + } + + mutex_unlock(&tegra_apb_dma_lock); + return *((u32 *)tegra_apb_bb); +} + +void tegra_apb_writel(u32 value, unsigned long offset) +{ + struct tegra_dma_req req; + int ret; + + if (!tegra_apb_dma && !tegra_apb_init()) { + writel(value, IO_TO_VIRT(offset)); + return; + } + + mutex_lock(&tegra_apb_dma_lock); + *((u32 *)tegra_apb_bb) = value; + req.complete = apb_dma_complete; + req.to_memory = 0; + req.dest_addr = offset; + req.dest_wrap = 4; + req.dest_bus_width = 32; + req.source_addr = tegra_apb_bb_phys; + req.source_bus_width = 32; + req.source_wrap = 1; + req.req_sel = TEGRA_DMA_REQ_SEL_CNTR; + req.size = 4; + + INIT_COMPLETION(tegra_apb_wait); + + tegra_dma_enqueue_req(tegra_apb_dma, &req); + + ret = wait_for_completion_timeout(&tegra_apb_wait, + msecs_to_jiffies(50)); + + if (WARN(ret == 0, "apb write dma timed out")) + tegra_dma_dequeue_req(tegra_apb_dma, &req); + + mutex_unlock(&tegra_apb_dma_lock); +} diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/apbio.h index a312988bf6f8..8b49e8c89a64 100644 --- a/arch/arm/mach-tegra/include/mach/system.h +++ b/arch/arm/mach-tegra/apbio.h @@ -1,12 +1,7 @@ /* - * arch/arm/mach-tegra/include/mach/system.h - * + * Copyright (C) 2010 NVIDIA Corporation. * Copyright (C) 2010 Google, Inc. * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. @@ -18,11 +13,27 @@ * */ -#ifndef __MACH_TEGRA_SYSTEM_H -#define __MACH_TEGRA_SYSTEM_H +#ifndef __MACH_TEGRA_APBIO_H +#define __MACH_TEGRA_APBIO_H + +#ifdef CONFIG_TEGRA_SYSTEM_DMA + +u32 tegra_apb_readl(unsigned long offset); +void tegra_apb_writel(u32 value, unsigned long offset); + +#else +#include <asm/io.h> +#include <mach/io.h> -static inline void arch_idle(void) +static inline u32 tegra_apb_readl(unsigned long offset) { + return readl(IO_TO_VIRT(offset)); } +static inline void tegra_apb_writel(u32 value, unsigned long offset) +{ + writel(value, IO_TO_VIRT(offset)); +} +#endif + #endif diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 7a95e0bc4aba..e20b419d5983 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -131,11 +131,7 @@ static void __init tegra_dt_init(void) } static const char *tegra20_dt_board_compat[] = { - "compulab,trimslice", - "nvidia,harmony", - "compal,paz00", - "nvidia,seaboard", - "nvidia,ventana", + "nvidia,tegra20", NULL }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 3c197e2440b7..5f7c03e972f3 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -34,20 +34,42 @@ #include <asm/hardware/gic.h> #include "board.h" +#include "clock.h" static struct of_device_id tegra_dt_match_table[] __initdata = { { .compatible = "simple-bus", }, {} }; +struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000400, "sdhci-tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000600, "sdhci-tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C000, "tegra-i2c.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C400, "tegra-i2c.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL), + {} +}; + +static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { + /* name parent rate enabled */ + { "uarta", "pll_p", 408000000, true }, + { NULL, NULL, 0, 0}, +}; + static void __init tegra30_dt_init(void) { + tegra_clk_init_from_table(tegra_dt_clk_init_table); + of_platform_populate(NULL, tegra_dt_match_table, - NULL, NULL); + tegra30_auxdata_lookup, NULL); } static const char *tegra30_dt_board_compat[] = { - "nvidia,cardhu", + "nvidia,tegra30", NULL }; diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c index 465808c8ac0b..1af85bccc0f1 100644 --- a/arch/arm/mach-tegra/board-harmony-pinmux.c +++ b/arch/arm/mach-tegra/board-harmony-pinmux.c @@ -53,7 +53,7 @@ static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_GME, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GPU, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_GPU7, TEGRA_MUX_RTCK, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_GPV, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_GPV, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_I2CP, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_IRRX, TEGRA_MUX_UARTA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, @@ -112,10 +112,10 @@ static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_SDC, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDD, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SLXD, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPDI, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 21d1285731b3..82f32300796c 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -18,31 +18,27 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/io.h> #include <linux/regulator/machine.h> #include <linux/mfd/tps6586x.h> -#include <mach/iomap.h> #include <mach/irqs.h> #include "board-harmony.h" -#define PMC_CTRL 0x0 -#define PMC_CTRL_INTR_LOW (1 << 17) - static struct regulator_consumer_supply tps658621_ldo0_supply[] = { REGULATOR_SUPPLY("pex_clk", NULL), }; static struct regulator_init_data ldo0_data = { .constraints = { - .min_uV = 1250 * 1000, + .min_uV = 3300 * 1000, .max_uV = 3300 * 1000, .valid_modes_mask = (REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY), .valid_ops_mask = (REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE), + .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply), .consumer_supplies = tps658621_ldo0_supply, @@ -114,16 +110,6 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { - void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); - u32 pmc_ctrl; - - /* - * Configure the power management controller to trigger PMU - * interrupts when low - */ - pmc_ctrl = readl(pmc + PMC_CTRL); - writel(pmc_ctrl | PMC_CTRL_INTR_LOW, pmc + PMC_CTRL); - i2c_register_board_info(3, harmony_regulators, 1); return 0; diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 789bdc9e8f91..c00aadb01e09 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -101,7 +101,6 @@ static struct wm8903_platform_data harmony_wm8903_pdata = { static struct i2c_board_info __initdata wm8903_board_info = { I2C_BOARD_INFO("wm8903", 0x1a), .platform_data = &harmony_wm8903_pdata, - .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ), }; static void __init harmony_i2c_init(void) @@ -111,6 +110,7 @@ static void __init harmony_i2c_init(void) platform_device_register(&tegra_i2c_device3); platform_device_register(&tegra_i2c_device4); + wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ); i2c_register_board_info(0, &wm8903_board_info, 1); } diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index ebac65f52510..d669847f0485 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -159,7 +159,6 @@ static struct platform_device *seaboard_devices[] __initdata = { static struct i2c_board_info __initdata isl29018_device = { I2C_BOARD_INFO("isl29018", 0x44), - .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_ISL29018_IRQ), }; static struct i2c_board_info __initdata adt7461_device = { @@ -183,7 +182,6 @@ static struct wm8903_platform_data wm8903_pdata = { static struct i2c_board_info __initdata wm8903_device = { I2C_BOARD_INFO("wm8903", 0x1a), .platform_data = &wm8903_pdata, - .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ), }; static int seaboard_ehci_init(void) @@ -214,7 +212,10 @@ static void __init seaboard_i2c_init(void) gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018"); gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ); + isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ); i2c_register_board_info(0, &isl29018_device, 1); + + wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ); i2c_register_board_info(0, &wm8903_device, 1); i2c_register_board_info(3, &adt7461_device, 1); diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 8337068a4abe..8dad8d18cb49 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -399,6 +399,28 @@ void tegra_periph_reset_assert(struct clk *c) } EXPORT_SYMBOL(tegra_periph_reset_assert); +/* Several extended clock configuration bits (e.g., clock routing, clock + * phase control) are included in PLL and peripheral clock source + * registers. */ +int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&c->spinlock, flags); + + if (!c->ops || !c->ops->clk_cfg_ex) { + ret = -ENOSYS; + goto out; + } + ret = c->ops->clk_cfg_ex(c, p, setting); + +out: + spin_unlock_irqrestore(&c->spinlock, flags); + + return ret; +} + #ifdef CONFIG_DEBUG_FS static int __clk_lock_all_spinlocks(void) diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index 5c44106616c5..bc300657deba 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -24,6 +24,8 @@ #include <linux/list.h> #include <linux/spinlock.h> +#include <mach/clk.h> + #define DIV_BUS (1 << 0) #define DIV_U71 (1 << 1) #define DIV_U71_FIXED (1 << 2) @@ -39,7 +41,16 @@ #define PERIPH_MANUAL_RESET (1 << 12) #define PLL_ALT_MISC_REG (1 << 13) #define PLLU (1 << 14) +#define PLLX (1 << 15) +#define MUX_PWM (1 << 16) +#define MUX8 (1 << 17) +#define DIV_U71_UART (1 << 18) +#define MUX_CLK_OUT (1 << 19) +#define PLLM (1 << 20) +#define DIV_U71_INT (1 << 21) +#define DIV_U71_IDLE (1 << 22) #define ENABLE_ON_INIT (1 << 28) +#define PERIPH_ON_APB (1 << 29) struct clk; @@ -65,6 +76,8 @@ struct clk_ops { int (*set_rate)(struct clk *, unsigned long); long (*round_rate)(struct clk *, unsigned long); void (*reset)(struct clk *, bool); + int (*clk_cfg_ex)(struct clk *, + enum tegra_clk_ex_param, u32); }; enum clk_state { @@ -114,6 +127,7 @@ struct clk { unsigned long vco_max; const struct clk_pll_freq_table *freq_table; int lock_delay; + unsigned long fixed_rate; } pll; struct { u32 sel; @@ -146,6 +160,7 @@ struct tegra_clk_init_table { }; void tegra2_init_clocks(void); +void tegra30_init_clocks(void); void clk_init(struct clk *clk); struct clk *tegra_get_clock_by_name(const char *name); int clk_reparent(struct clk *c, struct clk *parent); diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index a2eb90169aed..22df10fb9972 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -27,11 +27,29 @@ #include <asm/hardware/gic.h> #include <mach/iomap.h> -#include <mach/system.h> +#include <mach/powergate.h> #include "board.h" #include "clock.h" #include "fuse.h" +#include "pmc.h" + +/* + * Storage for debug-macro.S's state. + * + * This must be in .data not .bss so that it gets initialized each time the + * kernel is loaded. The data is declared here rather than debug-macro.S so + * that multiple inclusions of debug-macro.S point at the same data. + */ +#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF) +u32 tegra_uart_config[3] = { + /* Debug UART initialization required */ + 1, + /* Debug UART physical address */ + (u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET), + /* Debug UART virtual address */ + (u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET), +}; #ifdef CONFIG_OF static const struct of_device_id tegra_dt_irq_match[] __initconst = { @@ -100,11 +118,17 @@ void __init tegra20_init_early(void) tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); tegra_init_cache(0x331, 0x441); + tegra_pmc_init(); + tegra_powergate_init(); } #endif #ifdef CONFIG_ARCH_TEGRA_3x_SOC void __init tegra30_init_early(void) { + tegra_init_fuse(); + tegra30_init_clocks(); tegra_init_cache(0x441, 0x551); + tegra_pmc_init(); + tegra_powergate_init(); } #endif diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index bb5ce39b733b..7a065f0cf633 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -30,7 +30,6 @@ #include <linux/io.h> #include <linux/suspend.h> -#include <asm/system.h> #include <mach/clk.h> diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c new file mode 100644 index 000000000000..d83a8c0296f5 --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle.c @@ -0,0 +1,107 @@ +/* + * arch/arm/mach-tegra/cpuidle.c + * + * CPU idle driver for Tegra CPUs + * + * Copyright (c) 2010-2012, NVIDIA Corporation. + * Copyright (c) 2011 Google, Inc. + * Author: Colin Cross <ccross@android.com> + * Gary King <gking@nvidia.com> + * + * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/cpu.h> +#include <linux/cpuidle.h> +#include <linux/hrtimer.h> + +#include <mach/iomap.h> + +extern void tegra_cpu_wfi(void); + +static int tegra_idle_enter_lp3(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); + +struct cpuidle_driver tegra_idle_driver = { + .name = "tegra_idle", + .owner = THIS_MODULE, + .state_count = 1, + .states = { + [0] = { + .enter = tegra_idle_enter_lp3, + .exit_latency = 10, + .target_residency = 10, + .power_usage = 600, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "LP3", + .desc = "CPU flow-controlled", + }, + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); + +static int tegra_idle_enter_lp3(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + ktime_t enter, exit; + s64 us; + + local_irq_disable(); + local_fiq_disable(); + + enter = ktime_get(); + + tegra_cpu_wfi(); + + exit = ktime_sub(ktime_get(), enter); + us = ktime_to_us(exit); + + local_fiq_enable(); + local_irq_enable(); + + dev->last_residency = us; + + return index; +} + +static int __init tegra_cpuidle_init(void) +{ + int ret; + unsigned int cpu; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &tegra_idle_driver; + + ret = cpuidle_register_driver(&tegra_idle_driver); + if (ret) { + pr_err("CPUidle driver registration failed\n"); + return ret; + } + + for_each_possible_cpu(cpu) { + dev = &per_cpu(tegra_idle_device, cpu); + dev->cpu = cpu; + + dev->state_count = drv->state_count; + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("CPU%u: CPUidle device registration failed\n", + cpu); + return ret; + } + } + return 0; +} +device_initcall(tegra_cpuidle_init); diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index c0cf967e47d3..abea4f6e2dd5 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -33,6 +33,8 @@ #include <mach/iomap.h> #include <mach/suspend.h> +#include "apbio.h" + #define APB_DMA_GEN 0x000 #define GEN_ENABLE (1<<31) @@ -50,8 +52,6 @@ #define CSR_ONCE (1<<27) #define CSR_FLOW (1<<21) #define CSR_REQ_SEL_SHIFT 16 -#define CSR_REQ_SEL_MASK (0x1F<<CSR_REQ_SEL_SHIFT) -#define CSR_REQ_SEL_INVALID (31<<CSR_REQ_SEL_SHIFT) #define CSR_WCOUNT_SHIFT 2 #define CSR_WCOUNT_MASK 0xFFFC @@ -133,6 +133,7 @@ struct tegra_dma_channel { static bool tegra_dma_initialized; static DEFINE_MUTEX(tegra_dma_lock); +static DEFINE_SPINLOCK(enable_lock); static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS); static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS]; @@ -180,36 +181,94 @@ static void tegra_dma_stop(struct tegra_dma_channel *ch) static int tegra_dma_cancel(struct tegra_dma_channel *ch) { - u32 csr; unsigned long irq_flags; spin_lock_irqsave(&ch->lock, irq_flags); while (!list_empty(&ch->list)) list_del(ch->list.next); - csr = readl(ch->addr + APB_DMA_CHAN_CSR); - csr &= ~CSR_REQ_SEL_MASK; - csr |= CSR_REQ_SEL_INVALID; - writel(csr, ch->addr + APB_DMA_CHAN_CSR); - tegra_dma_stop(ch); spin_unlock_irqrestore(&ch->lock, irq_flags); return 0; } +static unsigned int get_channel_status(struct tegra_dma_channel *ch, + struct tegra_dma_req *req, bool is_stop_dma) +{ + void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE); + unsigned int status; + + if (is_stop_dma) { + /* + * STOP the DMA and get the transfer count. + * Getting the transfer count is tricky. + * - Globally disable DMA on all channels + * - Read the channel's status register to know the number + * of pending bytes to be transfered. + * - Stop the dma channel + * - Globally re-enable DMA to resume other transfers + */ + spin_lock(&enable_lock); + writel(0, addr + APB_DMA_GEN); + udelay(20); + status = readl(ch->addr + APB_DMA_CHAN_STA); + tegra_dma_stop(ch); + writel(GEN_ENABLE, addr + APB_DMA_GEN); + spin_unlock(&enable_lock); + if (status & STA_ISE_EOC) { + pr_err("Got Dma Int here clearing"); + writel(status, ch->addr + APB_DMA_CHAN_STA); + } + req->status = TEGRA_DMA_REQ_ERROR_ABORTED; + } else { + status = readl(ch->addr + APB_DMA_CHAN_STA); + } + return status; +} + +/* should be called with the channel lock held */ +static unsigned int dma_active_count(struct tegra_dma_channel *ch, + struct tegra_dma_req *req, unsigned int status) +{ + unsigned int to_transfer; + unsigned int req_transfer_count; + unsigned int bytes_transferred; + + to_transfer = ((status & STA_COUNT_MASK) >> STA_COUNT_SHIFT) + 1; + req_transfer_count = ch->req_transfer_count + 1; + bytes_transferred = req_transfer_count; + if (status & STA_BUSY) + bytes_transferred -= to_transfer; + /* + * In continuous transfer mode, DMA only tracks the count of the + * half DMA buffer. So, if the DMA already finished half the DMA + * then add the half buffer to the completed count. + */ + if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) { + if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) + bytes_transferred += req_transfer_count; + if (status & STA_ISE_EOC) + bytes_transferred += req_transfer_count; + } + bytes_transferred *= 4; + return bytes_transferred; +} + int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, struct tegra_dma_req *_req) { - unsigned int csr; unsigned int status; struct tegra_dma_req *req = NULL; int found = 0; unsigned long irq_flags; - int to_transfer; - int req_transfer_count; + int stop = 0; spin_lock_irqsave(&ch->lock, irq_flags); + + if (list_entry(ch->list.next, struct tegra_dma_req, node) == _req) + stop = 1; + list_for_each_entry(req, &ch->list, node) { if (req == _req) { list_del(&req->node); @@ -222,47 +281,12 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, return 0; } - /* STOP the DMA and get the transfer count. - * Getting the transfer count is tricky. - * - Change the source selector to invalid to stop the DMA from - * FIFO to memory. - * - Read the status register to know the number of pending - * bytes to be transferred. - * - Finally stop or program the DMA to the next buffer in the - * list. - */ - csr = readl(ch->addr + APB_DMA_CHAN_CSR); - csr &= ~CSR_REQ_SEL_MASK; - csr |= CSR_REQ_SEL_INVALID; - writel(csr, ch->addr + APB_DMA_CHAN_CSR); - - /* Get the transfer count */ - status = readl(ch->addr + APB_DMA_CHAN_STA); - to_transfer = (status & STA_COUNT_MASK) >> STA_COUNT_SHIFT; - req_transfer_count = ch->req_transfer_count; - req_transfer_count += 1; - to_transfer += 1; - - req->bytes_transferred = req_transfer_count; - - if (status & STA_BUSY) - req->bytes_transferred -= to_transfer; - - /* In continuous transfer mode, DMA only tracks the count of the - * half DMA buffer. So, if the DMA already finished half the DMA - * then add the half buffer to the completed count. - * - * FIXME: There can be a race here. What if the req to - * dequue happens at the same time as the DMA just moved to - * the new buffer and SW didn't yet received the interrupt? - */ - if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) - if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) - req->bytes_transferred += req_transfer_count; + if (!stop) + goto skip_stop_dma; - req->bytes_transferred *= 4; + status = get_channel_status(ch, req, true); + req->bytes_transferred = dma_active_count(ch, req, status); - tegra_dma_stop(ch); if (!list_empty(&ch->list)) { /* if the list is not empty, queue the next request */ struct tegra_dma_req *next_req; @@ -270,6 +294,8 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, typeof(*next_req), node); tegra_dma_update_hw(ch, next_req); } + +skip_stop_dma: req->status = -TEGRA_DMA_REQ_ERROR_ABORTED; spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -357,7 +383,7 @@ struct tegra_dma_channel *tegra_dma_allocate_channel(int mode) int channel; struct tegra_dma_channel *ch = NULL; - if (WARN_ON(!tegra_dma_initialized)) + if (!tegra_dma_initialized) return NULL; mutex_lock(&tegra_dma_lock); diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c new file mode 100644 index 000000000000..fef66a7486ed --- /dev/null +++ b/arch/arm/mach-tegra/flowctrl.c @@ -0,0 +1,62 @@ +/* + * arch/arm/mach-tegra/flowctrl.c + * + * functions and macros to control the flowcontroller + * + * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> + +#include <mach/iomap.h> + +#include "flowctrl.h" + +u8 flowctrl_offset_halt_cpu[] = { + FLOW_CTRL_HALT_CPU0_EVENTS, + FLOW_CTRL_HALT_CPU1_EVENTS, + FLOW_CTRL_HALT_CPU1_EVENTS + 8, + FLOW_CTRL_HALT_CPU1_EVENTS + 16, +}; + +u8 flowctrl_offset_cpu_csr[] = { + FLOW_CTRL_CPU0_CSR, + FLOW_CTRL_CPU1_CSR, + FLOW_CTRL_CPU1_CSR + 8, + FLOW_CTRL_CPU1_CSR + 16, +}; + +static void flowctrl_update(u8 offset, u32 value) +{ + void __iomem *addr = IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + offset; + + writel(value, addr); + + /* ensure the update has reached the flow controller */ + wmb(); + readl_relaxed(addr); +} + +void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value) +{ + return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value); +} + +void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value) +{ + return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value); +} diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h new file mode 100644 index 000000000000..19428173855e --- /dev/null +++ b/arch/arm/mach-tegra/flowctrl.h @@ -0,0 +1,42 @@ +/* + * arch/arm/mach-tegra/flowctrl.h + * + * functions and macros to control the flowcontroller + * + * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __MACH_TEGRA_FLOWCTRL_H +#define __MACH_TEGRA_FLOWCTRL_H + +#define FLOW_CTRL_HALT_CPU0_EVENTS 0x0 +#define FLOW_CTRL_WAITEVENT (2 << 29) +#define FLOW_CTRL_WAIT_FOR_INTERRUPT (4 << 29) +#define FLOW_CTRL_JTAG_RESUME (1 << 28) +#define FLOW_CTRL_HALT_CPU_IRQ (1 << 10) +#define FLOW_CTRL_HALT_CPU_FIQ (1 << 8) +#define FLOW_CTRL_CPU0_CSR 0x8 +#define FLOW_CTRL_CSR_INTR_FLAG (1 << 15) +#define FLOW_CTRL_CSR_EVENT_FLAG (1 << 14) +#define FLOW_CTRL_CSR_ENABLE (1 << 0) +#define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 +#define FLOW_CTRL_CPU1_CSR 0x18 + +#ifndef __ASSEMBLY__ +void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value); +void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value); +#endif + +#endif diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index ea49bd93c6b9..f946d129423c 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -19,68 +19,113 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <linux/module.h> +#include <linux/export.h> #include <mach/iomap.h> #include "fuse.h" +#include "apbio.h" #define FUSE_UID_LOW 0x108 #define FUSE_UID_HIGH 0x10c #define FUSE_SKU_INFO 0x110 #define FUSE_SPARE_BIT 0x200 -static inline u32 fuse_readl(unsigned long offset) +int tegra_sku_id; +int tegra_cpu_process_id; +int tegra_core_process_id; +int tegra_chip_id; +enum tegra_revision tegra_revision; + +/* The BCT to use at boot is specified by board straps that can be read + * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs. + */ +int tegra_bct_strapping; + +#define STRAP_OPT 0x008 +#define GMI_AD0 (1 << 4) +#define GMI_AD1 (1 << 5) +#define RAM_ID_MASK (GMI_AD0 | GMI_AD1) +#define RAM_CODE_SHIFT 4 + +static const char *tegra_revision_name[TEGRA_REVISION_MAX] = { + [TEGRA_REVISION_UNKNOWN] = "unknown", + [TEGRA_REVISION_A01] = "A01", + [TEGRA_REVISION_A02] = "A02", + [TEGRA_REVISION_A03] = "A03", + [TEGRA_REVISION_A03p] = "A03 prime", + [TEGRA_REVISION_A04] = "A04", +}; + +static inline u32 tegra_fuse_readl(unsigned long offset) { - return readl(IO_TO_VIRT(TEGRA_FUSE_BASE + offset)); + return tegra_apb_readl(TEGRA_FUSE_BASE + offset); } -static inline void fuse_writel(u32 value, unsigned long offset) +static inline bool get_spare_fuse(int bit) { - writel(value, IO_TO_VIRT(TEGRA_FUSE_BASE + offset)); + return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4); +} + +static enum tegra_revision tegra_get_revision(u32 id) +{ + u32 minor_rev = (id >> 16) & 0xf; + + switch (minor_rev) { + case 1: + return TEGRA_REVISION_A01; + case 2: + return TEGRA_REVISION_A02; + case 3: + if (tegra_chip_id == TEGRA20 && + (get_spare_fuse(18) || get_spare_fuse(19))) + return TEGRA_REVISION_A03p; + else + return TEGRA_REVISION_A03; + case 4: + return TEGRA_REVISION_A04; + default: + return TEGRA_REVISION_UNKNOWN; + } } void tegra_init_fuse(void) { + u32 id; + u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); reg |= 1 << 28; writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); - pr_info("Tegra SKU: %d CPU Process: %d Core Process: %d\n", - tegra_sku_id(), tegra_cpu_process_id(), - tegra_core_process_id()); + reg = tegra_fuse_readl(FUSE_SKU_INFO); + tegra_sku_id = reg & 0xFF; + + reg = tegra_fuse_readl(FUSE_SPARE_BIT); + tegra_cpu_process_id = (reg >> 6) & 3; + + reg = tegra_fuse_readl(FUSE_SPARE_BIT); + tegra_core_process_id = (reg >> 12) & 3; + + reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT); + tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT; + + id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); + tegra_chip_id = (id >> 8) & 0xff; + + tegra_revision = tegra_get_revision(id); + + pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", + tegra_revision_name[tegra_revision], + tegra_sku_id, tegra_cpu_process_id, + tegra_core_process_id); } unsigned long long tegra_chip_uid(void) { unsigned long long lo, hi; - lo = fuse_readl(FUSE_UID_LOW); - hi = fuse_readl(FUSE_UID_HIGH); + lo = tegra_fuse_readl(FUSE_UID_LOW); + hi = tegra_fuse_readl(FUSE_UID_HIGH); return (hi << 32ull) | lo; } EXPORT_SYMBOL(tegra_chip_uid); - -int tegra_sku_id(void) -{ - int sku_id; - u32 reg = fuse_readl(FUSE_SKU_INFO); - sku_id = reg & 0xFF; - return sku_id; -} - -int tegra_cpu_process_id(void) -{ - int cpu_process_id; - u32 reg = fuse_readl(FUSE_SPARE_BIT); - cpu_process_id = (reg >> 6) & 3; - return cpu_process_id; -} - -int tegra_core_process_id(void) -{ - int core_process_id; - u32 reg = fuse_readl(FUSE_SPARE_BIT); - core_process_id = (reg >> 12) & 3; - return core_process_id; -} diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index 584b2e27dbda..d2107b2cb85a 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-tegra/fuse.c - * * Copyright (C) 2010 Google, Inc. * * Author: @@ -17,8 +15,38 @@ * */ +#ifndef __MACH_TEGRA_FUSE_H +#define __MACH_TEGRA_FUSE_H + +enum tegra_revision { + TEGRA_REVISION_UNKNOWN = 0, + TEGRA_REVISION_A01, + TEGRA_REVISION_A02, + TEGRA_REVISION_A03, + TEGRA_REVISION_A03p, + TEGRA_REVISION_A04, + TEGRA_REVISION_MAX, +}; + +#define SKU_ID_T20 8 +#define SKU_ID_T25SE 20 +#define SKU_ID_AP25 23 +#define SKU_ID_T25 24 +#define SKU_ID_AP25E 27 +#define SKU_ID_T25E 28 + +#define TEGRA20 0x20 +#define TEGRA30 0x30 + +extern int tegra_sku_id; +extern int tegra_cpu_process_id; +extern int tegra_core_process_id; +extern int tegra_chip_id; +extern enum tegra_revision tegra_revision; + +extern int tegra_bct_strapping; + unsigned long long tegra_chip_uid(void); -int tegra_sku_id(void); -int tegra_cpu_process_id(void); -int tegra_core_process_id(void); void tegra_init_fuse(void); + +#endif diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index b5349b2f13d2..fef9c2c51370 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -1,6 +1,23 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/cache.h> + +#include <mach/iomap.h> + +#include "flowctrl.h" +#include "reset.h" + +#define APB_MISC_GP_HIDREV 0x804 +#define PMC_SCRATCH41 0x140 + +#define RESET_DATA(x) ((TEGRA_RESET_##x)*4) + + .macro mov32, reg, val + movw \reg, #:lower16:\val + movt \reg, #:upper16:\val + .endm + .section ".text.head", "ax" __CPUINIT @@ -47,15 +64,149 @@ ENTRY(v7_invalidate_l1) mov pc, lr ENDPROC(v7_invalidate_l1) + ENTRY(tegra_secondary_startup) - msr cpsr_fsxc, #0xd3 bl v7_invalidate_l1 - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - ldr r1, =0x6000f100 - str r0, [r1] -1: ldr r2, [r1] - cmp r0, r2 - beq 1b + /* Enable coresight */ + mov32 r0, 0xC5ACCE55 + mcr p14, 0, r0, c7, c12, 6 b secondary_startup ENDPROC(tegra_secondary_startup) + + .align L1_CACHE_SHIFT +ENTRY(__tegra_cpu_reset_handler_start) + +/* + * __tegra_cpu_reset_handler: + * + * Common handler for all CPU reset events. + * + * Register usage within the reset handler: + * + * R7 = CPU present (to the OS) mask + * R8 = CPU in LP1 state mask + * R9 = CPU in LP2 state mask + * R10 = CPU number + * R11 = CPU mask + * R12 = pointer to reset handler data + * + * NOTE: This code is copied to IRAM. All code and data accesses + * must be position-independent. + */ + + .align L1_CACHE_SHIFT +ENTRY(__tegra_cpu_reset_handler) + + cpsid aif, 0x13 @ SVC mode, interrupts disabled + mrc p15, 0, r10, c0, c0, 5 @ MPIDR + and r10, r10, #0x3 @ R10 = CPU number + mov r11, #1 + mov r11, r11, lsl r10 @ R11 = CPU mask + adr r12, __tegra_cpu_reset_handler_data + +#ifdef CONFIG_SMP + /* Does the OS know about this CPU? */ + ldr r7, [r12, #RESET_DATA(MASK_PRESENT)] + tst r7, r11 @ if !present + bleq __die @ CPU not present (to OS) +#endif + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + bne 1f + /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ + mov32 r6, TEGRA_PMC_BASE + mov r0, #0 + cmp r10, #0 + strne r0, [r6, #PMC_SCRATCH41] +1: +#endif + +#ifdef CONFIG_SMP + /* + * Can only be secondary boot (initial or hotplug) but CPU 0 + * cannot be here. + */ + cmp r10, #0 + bleq __die @ CPU0 cannot be here + ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)] + cmp lr, #0 + bleq __die @ no secondary startup handler + bx lr +#endif + +/* + * We don't know why the CPU reset. Just kill it. + * The LR register will contain the address we died at + 4. + */ + +__die: + sub lr, lr, #4 + mov32 r7, TEGRA_PMC_BASE + str lr, [r7, #PMC_SCRATCH41] + + mov32 r7, TEGRA_CLK_RESET_BASE + + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + bne 1f + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC + mov32 r0, 0x1111 + mov r1, r0, lsl r10 + str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET +#endif +1: +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + mov32 r6, TEGRA_FLOW_CTRL_BASE + + cmp r10, #0 + moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS + moveq r2, #FLOW_CTRL_CPU0_CSR + movne r1, r10, lsl #3 + addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8) + addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8) + + /* Clear CPU "event" and "interrupt" flags and power gate + it when halting but not before it is in the "WFI" state. */ + ldr r0, [r6, +r2] + orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + orr r0, r0, #FLOW_CTRL_CSR_ENABLE + str r0, [r6, +r2] + + /* Unconditionally halt this CPU */ + mov r0, #FLOW_CTRL_WAITEVENT + str r0, [r6, +r1] + ldr r0, [r6, +r1] @ memory barrier + + dsb + isb + wfi @ CPU should be power gated here + + /* If the CPU didn't power gate above just kill it's clock. */ + + mov r0, r11, lsl #8 + str r0, [r7, #348] @ CLK_CPU_CMPLX_SET +#endif + + /* If the CPU still isn't dead, just spin here. */ + b . +ENDPROC(__tegra_cpu_reset_handler) + + .align L1_CACHE_SHIFT + .type __tegra_cpu_reset_handler_data, %object + .globl __tegra_cpu_reset_handler_data +__tegra_cpu_reset_handler_data: + .rept TEGRA_RESET_DATA_SIZE + .long 0 + .endr + .align L1_CACHE_SHIFT + +ENTRY(__tegra_cpu_reset_handler_end) diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index f3294040d357..d8dc9ddd6d18 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> static inline void cpu_enter_lowpower(void) { diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index fc3ecb66de08..d97e403303a0 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -22,10 +22,20 @@ struct clk; +enum tegra_clk_ex_param { + TEGRA_CLK_VI_INP_SEL, + TEGRA_CLK_DTV_INVERT, + TEGRA_CLK_NAND_PAD_DIV2_ENB, + TEGRA_CLK_PLLD_CSI_OUT_ENB, + TEGRA_CLK_PLLD_DSI_OUT_ENB, + TEGRA_CLK_PLLD_MIPI_MUX_SEL, +}; + void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); unsigned long clk_get_rate_all_locked(struct clk *c); void tegra2_sdmmc_tap_delay(struct clk *c, int delay); +int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting); #endif diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index 619abc63aee8..90069abd37bd 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -1,11 +1,17 @@ /* * arch/arm/mach-tegra/include/mach/debug-macro.S * - * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2010,2011 Google, Inc. + * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. * * Author: * Colin Cross <ccross@google.com> * Erik Gilling <konkers@google.com> + * Doug Anderson <dianders@chromium.org> + * Stephen Warren <swarren@nvidia.com> + * + * Portions based on mach-omap2's debug-macro.S + * Copyright (C) 1994-1999 Russell King * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -18,18 +24,78 @@ * */ +#include <linux/serial_reg.h> + #include <mach/io.h> #include <mach/iomap.h> +#include <mach/irammap.h> + + .macro addruart, rp, rv, tmp + adr \rp, 99f @ actual addr of 99f + ldr \rv, [\rp] @ linked addr is stored there + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ linked tegra_uart_config + sub \tmp, \rp, \rv @ actual tegra_uart_config + ldr \rp, [\tmp] @ Load tegra_uart_config + cmp \rp, #1 @ needs intitialization? + bne 100f @ no; go load the addresses + mov \rv, #0 @ yes; record init is done + str \rv, [\tmp] + mov \rp, #TEGRA_IRAM_BASE @ See if cookie is in IRAM + ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET] + movw \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff + movt \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16 + cmp \rv, \rp @ Cookie present? + bne 100f @ No, use default UART + mov \rp, #TEGRA_IRAM_BASE @ Load UART address from IRAM + ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4] + str \rv, [\tmp, #4] @ Store in tegra_uart_phys + sub \rv, \rv, #IO_APB_PHYS @ Calculate virt address + add \rv, \rv, #IO_APB_VIRT + str \rv, [\tmp, #8] @ Store in tegra_uart_virt + b 100f + + .align +99: .word . + .word tegra_uart_config + .ltorg + +100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys + ldr \rv, [\tmp, #8] @ Load tegra_uart_virt + .endm + +#define UART_SHIFT 2 + +/* + * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra + * check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case. + * We use the fact that all 5 valid UART addresses all have something in the + * 2nd-to-lowest byte. + */ - .macro addruart, rp, rv, tmp - ldr \rp, =IO_APB_PHYS @ physical - ldr \rv, =IO_APB_VIRT @ virtual - orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF) - orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF00) - orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF) - orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF00) - .endm + .macro senduart, rd, rx + tst \rx, #0x0000ff00 + strneb \rd, [\rx, #UART_TX << UART_SHIFT] +1001: + .endm -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> + .macro busyuart, rd, rx + tst \rx, #0x0000ff00 + beq 1002f +1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1001b +1002: + .endm + .macro waituart, rd, rx +#ifdef FLOW_CONTROL + tst \rx, #0x0000ff00 + beq 1002f +1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +1002: +#endif + .endm diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S deleted file mode 100644 index e577cfe27e72..000000000000 --- a/arch/arm/mach-tegra/include/mach/entry-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-tegra/include/mach/entry-macro.S - * - * Copyright (C) 2009 Palm, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h index 87d37fdf5084..6140820555e1 100644 --- a/arch/arm/mach-tegra/include/mach/gpio-tegra.h +++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h @@ -25,8 +25,6 @@ #define TEGRA_NR_GPIOS INT_GPIO_NR -#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) - struct tegra_gpio_table { int gpio; /* GPIO number */ bool enable; /* Enable for GPIO at init? */ diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h index 19dec3ac0854..cff672a344f4 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/include/mach/iomap.h @@ -74,6 +74,9 @@ #define TEGRA_QUATERNARY_ICTLR_BASE 0x60004300 #define TEGRA_QUATERNARY_ICTLR_SIZE SZ_64 +#define TEGRA_QUINARY_ICTLR_BASE 0x60004400 +#define TEGRA_QUINARY_ICTLR_SIZE SZ_64 + #define TEGRA_TMR1_BASE 0x60005000 #define TEGRA_TMR1_SIZE SZ_8 @@ -110,6 +113,9 @@ #define TEGRA_AHB_GIZMO_BASE 0x6000C004 #define TEGRA_AHB_GIZMO_SIZE 0x10C +#define TEGRA_SB_BASE 0x6000C200 +#define TEGRA_SB_SIZE 256 + #define TEGRA_STATMON_BASE 0x6000C400 #define TEGRA_STATMON_SIZE SZ_1K diff --git a/arch/arm/mach-tegra/include/mach/irammap.h b/arch/arm/mach-tegra/include/mach/irammap.h new file mode 100644 index 000000000000..0cbe63261854 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/irammap.h @@ -0,0 +1,35 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __MACH_TEGRA_IRAMMAP_H +#define __MACH_TEGRA_IRAMMAP_H + +#include <asm/sizes.h> + +/* The first 1K of IRAM is permanently reserved for the CPU reset handler */ +#define TEGRA_IRAM_RESET_HANDLER_OFFSET 0 +#define TEGRA_IRAM_RESET_HANDLER_SIZE SZ_1K + +/* + * These locations are written to by uncompress.h, and read by debug-macro.S. + * The first word holds the cookie value if the data is valid. The second + * word holds the UART physical address. + */ +#define TEGRA_IRAM_DEBUG_UART_OFFSET SZ_1K +#define TEGRA_IRAM_DEBUG_UART_SIZE 8 +#define TEGRA_IRAM_DEBUG_UART_COOKIE 0x55415254 + +#endif diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h index a2146cd6867d..aad1a2c1d714 100644 --- a/arch/arm/mach-tegra/include/mach/irqs.h +++ b/arch/arm/mach-tegra/include/mach/irqs.h @@ -165,11 +165,12 @@ #define INT_QUAD_RES_30 (INT_QUAD_BASE + 30) #define INT_QUAD_RES_31 (INT_QUAD_BASE + 31) -#define INT_MAIN_NR (INT_QUAD_BASE + 32 - INT_PRI_BASE) - +/* Tegra30 has 5 banks of 32 IRQs */ +#define INT_MAIN_NR (32 * 5) #define INT_GPIO_BASE (INT_PRI_BASE + INT_MAIN_NR) -#define INT_GPIO_NR (28 * 8) +/* Tegra30 has 8 banks of 32 GPIOs */ +#define INT_GPIO_NR (32 * 8) #define TEGRA_NR_IRQS (INT_GPIO_BASE + INT_GPIO_NR) diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h index 20bb0545f992..a13025612939 100644 --- a/arch/arm/mach-tegra/include/mach/kbc.h +++ b/arch/arm/mach-tegra/include/mach/kbc.h @@ -24,20 +24,21 @@ #include <linux/types.h> #include <linux/input/matrix_keypad.h> -#ifdef CONFIG_ARCH_TEGRA_2x_SOC #define KBC_MAX_GPIO 24 #define KBC_MAX_KPENT 8 -#else -#define KBC_MAX_GPIO 20 -#define KBC_MAX_KPENT 7 -#endif #define KBC_MAX_ROW 16 #define KBC_MAX_COL 8 #define KBC_MAX_KEY (KBC_MAX_ROW * KBC_MAX_COL) +enum tegra_pin_type { + PIN_CFG_IGNORE, + PIN_CFG_COL, + PIN_CFG_ROW, +}; + struct tegra_kbc_pin_cfg { - bool is_row; + enum tegra_pin_type type; unsigned char num; }; diff --git a/arch/arm/mach-tegra/include/mach/pinconf-tegra.h b/arch/arm/mach-tegra/include/mach/pinconf-tegra.h new file mode 100644 index 000000000000..1f24d304921e --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/pinconf-tegra.h @@ -0,0 +1,63 @@ +/* + * pinctrl configuration definitions for the NVIDIA Tegra pinmux + * + * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __PINCONF_TEGRA_H__ +#define __PINCONF_TEGRA_H__ + +enum tegra_pinconf_param { + /* argument: tegra_pinconf_pull */ + TEGRA_PINCONF_PARAM_PULL, + /* argument: tegra_pinconf_tristate */ + TEGRA_PINCONF_PARAM_TRISTATE, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_ENABLE_INPUT, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_OPEN_DRAIN, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_LOCK, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_IORESET, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_SCHMITT, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_LOW_POWER_MODE, + /* argument: Integer, range is HW-dependant */ + TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, + /* argument: Integer, range is HW-dependant */ + TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, + /* argument: Integer, range is HW-dependant */ + TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, + /* argument: Integer, range is HW-dependant */ + TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, +}; + +enum tegra_pinconf_pull { + TEGRA_PINCONFIG_PULL_NONE, + TEGRA_PINCONFIG_PULL_DOWN, + TEGRA_PINCONFIG_PULL_UP, +}; + +enum tegra_pinconf_tristate { + TEGRA_PINCONFIG_DRIVEN, + TEGRA_PINCONFIG_TRISTATE, +}; + +#define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_)) +#define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16) +#define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff) + +#endif diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h index 39c396d2ddb0..4752b1a68f35 100644 --- a/arch/arm/mach-tegra/include/mach/powergate.h +++ b/arch/arm/mach-tegra/include/mach/powergate.h @@ -27,8 +27,21 @@ #define TEGRA_POWERGATE_VDEC 4 #define TEGRA_POWERGATE_L2 5 #define TEGRA_POWERGATE_MPE 6 -#define TEGRA_NUM_POWERGATE 7 +#define TEGRA_POWERGATE_HEG 7 +#define TEGRA_POWERGATE_SATA 8 +#define TEGRA_POWERGATE_CPU1 9 +#define TEGRA_POWERGATE_CPU2 10 +#define TEGRA_POWERGATE_CPU3 11 +#define TEGRA_POWERGATE_CELP 12 +#define TEGRA_POWERGATE_3D1 13 +#define TEGRA_POWERGATE_CPU0 TEGRA_POWERGATE_CPU +#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D + +int __init tegra_powergate_init(void); + +int tegra_cpu_powergate_id(int cpuid); +int tegra_powergate_is_powered(int id); int tegra_powergate_power_on(int id); int tegra_powergate_power_off(int id); int tegra_powergate_remove_clamping(int id); diff --git a/arch/arm/mach-tegra/include/mach/smmu.h b/arch/arm/mach-tegra/include/mach/smmu.h new file mode 100644 index 000000000000..dad403a9cf00 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/smmu.h @@ -0,0 +1,63 @@ +/* + * IOMMU API for SMMU in Tegra30 + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef MACH_SMMU_H +#define MACH_SMMU_H + +enum smmu_hwgrp { + HWGRP_AFI, + HWGRP_AVPC, + HWGRP_DC, + HWGRP_DCB, + HWGRP_EPP, + HWGRP_G2, + HWGRP_HC, + HWGRP_HDA, + HWGRP_ISP, + HWGRP_MPE, + HWGRP_NV, + HWGRP_NV2, + HWGRP_PPCS, + HWGRP_SATA, + HWGRP_VDE, + HWGRP_VI, + + HWGRP_COUNT, + + HWGRP_END = ~0, +}; + +#define HWG_AFI (1 << HWGRP_AFI) +#define HWG_AVPC (1 << HWGRP_AVPC) +#define HWG_DC (1 << HWGRP_DC) +#define HWG_DCB (1 << HWGRP_DCB) +#define HWG_EPP (1 << HWGRP_EPP) +#define HWG_G2 (1 << HWGRP_G2) +#define HWG_HC (1 << HWGRP_HC) +#define HWG_HDA (1 << HWGRP_HDA) +#define HWG_ISP (1 << HWGRP_ISP) +#define HWG_MPE (1 << HWGRP_MPE) +#define HWG_NV (1 << HWGRP_NV) +#define HWG_NV2 (1 << HWGRP_NV2) +#define HWG_PPCS (1 << HWGRP_PPCS) +#define HWG_SATA (1 << HWGRP_SATA) +#define HWG_VDE (1 << HWGRP_VDE) +#define HWG_VI (1 << HWGRP_VI) + +#endif /* MACH_SMMU_H */ diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h index 4e8323770c79..5a440f315e57 100644 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ b/arch/arm/mach-tegra/include/mach/uncompress.h @@ -2,10 +2,14 @@ * arch/arm/mach-tegra/include/mach/uncompress.h * * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2011 Google, Inc. + * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. * * Author: * Colin Cross <ccross@google.com> * Erik Gilling <konkers@google.com> + * Doug Anderson <dianders@chromium.org> + * Stephen Warren <swarren@nvidia.com> * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -25,36 +29,130 @@ #include <linux/serial_reg.h> #include <mach/iomap.h> +#include <mach/irammap.h> + +#define BIT(x) (1 << (x)) +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) + +#define DEBUG_UART_SHIFT 2 + +volatile u8 *uart; static void putc(int c) { - volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE; - int shift = 2; - if (uart == NULL) return; - while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) + while (!(uart[UART_LSR << DEBUG_UART_SHIFT] & UART_LSR_THRE)) barrier(); - uart[UART_TX << shift] = c; + uart[UART_TX << DEBUG_UART_SHIFT] = c; } static inline void flush(void) { } +static inline void save_uart_address(void) +{ + u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET); + + if (uart) { + buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE; + buf[1] = (u32)uart; + } else + buf[0] = 0; +} + +/* + * Setup before decompression. This is where we do UART selection for + * earlyprintk and init the uart_base register. + */ static inline void arch_decomp_setup(void) { - volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE; - int shift = 2; + static const struct { + u32 base; + u32 reset_reg; + u32 clock_reg; + u32 bit; + } uarts[] = { + { + TEGRA_UARTA_BASE, + TEGRA_CLK_RESET_BASE + 0x04, + TEGRA_CLK_RESET_BASE + 0x10, + 6, + }, + { + TEGRA_UARTB_BASE, + TEGRA_CLK_RESET_BASE + 0x04, + TEGRA_CLK_RESET_BASE + 0x10, + 7, + }, + { + TEGRA_UARTC_BASE, + TEGRA_CLK_RESET_BASE + 0x08, + TEGRA_CLK_RESET_BASE + 0x14, + 23, + }, + { + TEGRA_UARTD_BASE, + TEGRA_CLK_RESET_BASE + 0x0c, + TEGRA_CLK_RESET_BASE + 0x18, + 1, + }, + { + TEGRA_UARTE_BASE, + TEGRA_CLK_RESET_BASE + 0x0c, + TEGRA_CLK_RESET_BASE + 0x18, + 2, + }, + }; + int i; + volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE; + u32 chip, div; + + /* + * Look for the first UART that: + * a) Is not in reset. + * b) Is clocked. + * c) Has a 'D' in the scratchpad register. + * + * Note that on Tegra30, the first two conditions are required, since + * if not true, accesses to the UART scratch register will hang. + * Tegra20 doesn't have this issue. + * + * The intent is that the bootloader will tell the kernel which UART + * to use by setting up those conditions. If nothing found, we'll fall + * back to what's specified in TEGRA_DEBUG_UART_BASE. + */ + for (i = 0; i < ARRAY_SIZE(uarts); i++) { + if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit)) + continue; + if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit))) + continue; + + uart = (volatile u8 *)uarts[i].base; + if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D') + continue; + + break; + } + if (i == ARRAY_SIZE(uarts)) + uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE; + save_uart_address(); if (uart == NULL) return; - uart[UART_LCR << shift] |= UART_LCR_DLAB; - uart[UART_DLL << shift] = 0x75; - uart[UART_DLM << shift] = 0x0; - uart[UART_LCR << shift] = 3; + chip = (apb_misc[0x804 / 4] >> 8) & 0xff; + if (chip == 0x20) + div = 0x0075; + else + div = 0x00dd; + + uart[UART_LCR << DEBUG_UART_SHIFT] |= UART_LCR_DLAB; + uart[UART_DLL << DEBUG_UART_SHIFT] = div & 0xff; + uart[UART_DLM << DEBUG_UART_SHIFT] = div >> 8; + uart[UART_LCR << DEBUG_UART_SHIFT] = 3; } static inline void arch_decomp_wdog(void) diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 4e1afcd54fae..2f5bd2db8e1f 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -44,14 +44,16 @@ #define ICTLR_COP_IER_CLR 0x38 #define ICTLR_COP_IEP_CLASS 0x3c -#define NUM_ICTLRS 4 #define FIRST_LEGACY_IRQ 32 +static int num_ictlrs; + static void __iomem *ictlr_reg_base[] = { IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE), IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE), IO_ADDRESS(TEGRA_TERTIARY_ICTLR_BASE), IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE), + IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE), }; static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg) @@ -60,7 +62,7 @@ static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg) u32 mask; BUG_ON(irq < FIRST_LEGACY_IRQ || - irq >= FIRST_LEGACY_IRQ + NUM_ICTLRS * 32); + irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32); base = ictlr_reg_base[(irq - FIRST_LEGACY_IRQ) / 32]; mask = BIT((irq - FIRST_LEGACY_IRQ) % 32); @@ -113,8 +115,18 @@ static int tegra_retrigger(struct irq_data *d) void __init tegra_init_irq(void) { int i; + void __iomem *distbase; + + distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE); + num_ictlrs = readl_relaxed(distbase + GIC_DIST_CTR) & 0x1f; + + if (num_ictlrs > ARRAY_SIZE(ictlr_reg_base)) { + WARN(1, "Too many (%d) interrupt controllers found. Maximum is %d.", + num_ictlrs, ARRAY_SIZE(ictlr_reg_base)); + num_ictlrs = ARRAY_SIZE(ictlr_reg_base); + } - for (i = 0; i < NUM_ICTLRS; i++) { + for (i = 0; i < num_ictlrs; i++) { void __iomem *ictlr = ictlr_reg_base[i]; writel(~0, ictlr + ICTLR_CPU_IER_CLR); writel(0, ictlr + ICTLR_CPU_IEP_CLASS); @@ -131,6 +143,6 @@ void __init tegra_init_irq(void) * initialized elsewhere under DT. */ if (!of_have_populated_dt()) - gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), + gic_init(0, 29, distbase, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); } diff --git a/arch/arm/mach-tegra/localtimer.c b/arch/arm/mach-tegra/localtimer.c deleted file mode 100644 index e91d681d45a2..000000000000 --- a/arch/arm/mach-tegra/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-tegra/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/clockchips.h> -#include <asm/irq.h> -#include <asm/smp_twd.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); - return 0; -} diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index af8b63435727..54a816ff3847 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -408,7 +408,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[0].flags = IORESOURCE_IO; if (request_resource(&ioport_resource, &pp->res[0])) panic("Request PCIe IO resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[0]); + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); /* * IORESOURCE_MEM @@ -427,7 +427,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[1].flags = IORESOURCE_MEM; if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe Memory resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[1]); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); /* * IORESOURCE_MEM | IORESOURCE_PREFETCH @@ -446,7 +446,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; if (request_resource(&iomem_resource, &pp->res[2])) panic("Request PCIe Prefetch Memory resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[2]); + pci_add_resource_offset(&sys->resources, &pp->res[2], sys->mem_offset); return 1; } @@ -585,10 +585,10 @@ static void tegra_pcie_setup_translations(void) afi_writel(0, AFI_MSI_BAR_SZ); } -static void tegra_pcie_enable_controller(void) +static int tegra_pcie_enable_controller(void) { u32 val, reg; - int i; + int i, timeout; /* Enable slot clock and pulse the reset signals */ for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) { @@ -639,8 +639,14 @@ static void tegra_pcie_enable_controller(void) pads_writel(0xfa5cfa5c, 0xc8); /* Wait for the PLL to lock */ + timeout = 300; do { val = pads_readl(PADS_PLL_CTL); + usleep_range(1000, 1000); + if (--timeout == 0) { + pr_err("Tegra PCIe error: timeout waiting for PLL\n"); + return -EBUSY; + } } while (!(val & PADS_PLL_CTL_LOCKDET)); /* turn off IDDQ override */ @@ -671,7 +677,7 @@ static void tegra_pcie_enable_controller(void) /* Disable all execptions */ afi_writel(0, AFI_FPCI_ERROR_MASKS); - return; + return 0; } static void tegra_pcie_xclk_clamp(bool clamp) @@ -921,7 +927,9 @@ int __init tegra_pcie_init(bool init_port0, bool init_port1) if (err) return err; - tegra_pcie_enable_controller(); + err = tegra_pcie_enable_controller(); + if (err) + return err; /* setup the AFI address translations */ tegra_pcie_setup_translations(); diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 7d2b5d03c1df..1a208dbf682f 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -24,19 +24,31 @@ #include <asm/mach-types.h> #include <asm/smp_scu.h> +#include <mach/clk.h> #include <mach/iomap.h> +#include <mach/powergate.h> + +#include "fuse.h" +#include "flowctrl.h" +#include "reset.h" extern void tegra_secondary_startup(void); -static DEFINE_SPINLOCK(boot_lock); static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE); #define EVP_CPU_RESET_VECTOR \ (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100) #define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \ (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c) +#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \ + (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340) #define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \ (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344) +#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \ + (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c) + +#define CPU_CLOCK(cpu) (0x1<<(8+cpu)) +#define CPU_RESET(cpu) (0x1111ul<<(cpu)) void __cpuinit platform_secondary_init(unsigned int cpu) { @@ -47,63 +59,106 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ gic_secondary_init(0); - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +static int tegra20_power_up_cpu(unsigned int cpu) { - unsigned long old_boot_vector; - unsigned long boot_vector; - unsigned long timeout; u32 reg; - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); + /* Enable the CPU clock. */ + reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX); + writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX); + barrier(); + reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX); + /* Clear flow controller CSR. */ + flowctrl_write_cpu_csr(cpu, 0); - /* set the reset vector to point to the secondary_startup routine */ + return 0; +} - boot_vector = virt_to_phys(tegra_secondary_startup); - old_boot_vector = readl(EVP_CPU_RESET_VECTOR); - writel(boot_vector, EVP_CPU_RESET_VECTOR); +static int tegra30_power_up_cpu(unsigned int cpu) +{ + u32 reg; + int ret, pwrgateid; + unsigned long timeout; - /* enable cpu clock on cpu1 */ - reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX); - writel(reg & ~(1<<9), CLK_RST_CONTROLLER_CLK_CPU_CMPLX); + pwrgateid = tegra_cpu_powergate_id(cpu); + if (pwrgateid < 0) + return pwrgateid; + + /* If this is the first boot, toggle powergates directly. */ + if (!tegra_powergate_is_powered(pwrgateid)) { + ret = tegra_powergate_power_on(pwrgateid); + if (ret) + return ret; + + /* Wait for the power to come up. */ + timeout = jiffies + 10*HZ; + while (tegra_powergate_is_powered(pwrgateid)) { + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + udelay(10); + } + } - reg = (1<<13) | (1<<9) | (1<<5) | (1<<1); - writel(reg, CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR); + /* CPU partition is powered. Enable the CPU clock. */ + writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); + reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); + udelay(10); - smp_wmb(); - flush_cache_all(); + /* Remove I/O clamps. */ + ret = tegra_powergate_remove_clamping(pwrgateid); + udelay(10); - /* unhalt the cpu */ - writel(0, IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + 0x14); + /* Clear flow controller CSR. */ + flowctrl_write_cpu_csr(cpu, 0); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - if (readl(EVP_CPU_RESET_VECTOR) != boot_vector) - break; - udelay(10); - } + return 0; +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + int status; - /* put the old boot vector back */ - writel(old_boot_vector, EVP_CPU_RESET_VECTOR); + /* + * Force the CPU into reset. The CPU must remain in reset when the + * flow controller state is cleared (which will cause the flow + * controller to stop driving reset if the CPU has been power-gated + * via the flow controller). This will have no effect on first boot + * of the CPU since it should already be in reset. + */ + writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET); + dmb(); /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish + * Unhalt the CPU. If the flow controller was used to power-gate the + * CPU this will cause the flow controller to stop driving reset. + * The CPU will remain in reset because the clock and reset block + * is now driving reset. */ - spin_unlock(&boot_lock); + flowctrl_write_cpu_halt(cpu, 0); + + switch (tegra_chip_id) { + case TEGRA20: + status = tegra20_power_up_cpu(cpu); + break; + case TEGRA30: + status = tegra30_power_up_cpu(cpu); + break; + default: + status = -EINVAL; + break; + } - return 0; + if (status) + goto done; + + /* Take the CPU out of reset. */ + writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR); + wmb(); +done: + return status; } /* @@ -128,6 +183,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - + tegra_cpu_reset_handler_init(); scu_enable(scu_base); } diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c new file mode 100644 index 000000000000..7af6a54404be --- /dev/null +++ b/arch/arm/mach-tegra/pmc.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/of.h> + +#include <mach/iomap.h> + +#define PMC_CTRL 0x0 +#define PMC_CTRL_INTR_LOW (1 << 17) + +static inline u32 tegra_pmc_readl(u32 reg) +{ + return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg)); +} + +static inline void tegra_pmc_writel(u32 val, u32 reg) +{ + writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg)); +} + +#ifdef CONFIG_OF +static const struct of_device_id matches[] __initconst = { + { .compatible = "nvidia,tegra20-pmc" }, + { } +}; +#endif + +void __init tegra_pmc_init(void) +{ + /* + * For now, Harmony is the only board that uses the PMC, and it wants + * the signal inverted. Seaboard would too if it used the PMC. + * Hopefully by the time other boards want to use the PMC, everything + * will be device-tree, or they also want it inverted. + */ + bool invert_interrupt = true; + u32 val; + +#ifdef CONFIG_OF + if (of_have_populated_dt()) { + struct device_node *np; + + invert_interrupt = false; + + np = of_find_matching_node(NULL, matches); + if (np) { + if (of_find_property(np, "nvidia,invert-interrupt", + NULL)) + invert_interrupt = true; + } + } +#endif + + val = tegra_pmc_readl(PMC_CTRL); + if (invert_interrupt) + val |= PMC_CTRL_INTR_LOW; + else + val &= ~PMC_CTRL_INTR_LOW; + tegra_pmc_writel(val, PMC_CTRL); +} diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-tegra/pmc.h index b1d8b5fbe373..8995ee4a8768 100644 --- a/arch/arm/mach-highbank/include/mach/system.h +++ b/arch/arm/mach-tegra/pmc.h @@ -1,5 +1,5 @@ /* - * Copyright 2010-2011 Calxeda, Inc. + * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -10,15 +10,14 @@ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * */ -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H -static inline void arch_idle(void) -{ - cpu_do_idle(); -} +#ifndef __MACH_TEGRA_PMC_H +#define __MACH_TEGRA_PMC_H + +void tegra_pmc_init(void); #endif diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index 948306491a59..c238699ae86f 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -31,6 +31,8 @@ #include <mach/iomap.h> #include <mach/powergate.h> +#include "fuse.h" + #define PWRGATE_TOGGLE 0x30 #define PWRGATE_TOGGLE_START (1 << 8) @@ -38,6 +40,16 @@ #define PWRGATE_STATUS 0x38 +static int tegra_num_powerdomains; +static int tegra_num_cpu_domains; +static u8 *tegra_cpu_domains; +static u8 tegra30_cpu_domains[] = { + TEGRA_POWERGATE_CPU0, + TEGRA_POWERGATE_CPU1, + TEGRA_POWERGATE_CPU2, + TEGRA_POWERGATE_CPU3, +}; + static DEFINE_SPINLOCK(tegra_powergate_lock); static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); @@ -75,7 +87,7 @@ static int tegra_powergate_set(int id, bool new_state) int tegra_powergate_power_on(int id) { - if (id < 0 || id >= TEGRA_NUM_POWERGATE) + if (id < 0 || id >= tegra_num_powerdomains) return -EINVAL; return tegra_powergate_set(id, true); @@ -83,17 +95,18 @@ int tegra_powergate_power_on(int id) int tegra_powergate_power_off(int id) { - if (id < 0 || id >= TEGRA_NUM_POWERGATE) + if (id < 0 || id >= tegra_num_powerdomains) return -EINVAL; return tegra_powergate_set(id, false); } -static bool tegra_powergate_is_powered(int id) +int tegra_powergate_is_powered(int id) { u32 status; - WARN_ON(id < 0 || id >= TEGRA_NUM_POWERGATE); + if (id < 0 || id >= tegra_num_powerdomains) + return -EINVAL; status = pmc_read(PWRGATE_STATUS) & (1 << id); return !!status; @@ -103,7 +116,7 @@ int tegra_powergate_remove_clamping(int id) { u32 mask; - if (id < 0 || id >= TEGRA_NUM_POWERGATE) + if (id < 0 || id >= tegra_num_powerdomains) return -EINVAL; /* @@ -156,6 +169,34 @@ err_power: return ret; } +int tegra_cpu_powergate_id(int cpuid) +{ + if (cpuid > 0 && cpuid < tegra_num_cpu_domains) + return tegra_cpu_domains[cpuid]; + + return -EINVAL; +} + +int __init tegra_powergate_init(void) +{ + switch (tegra_chip_id) { + case TEGRA20: + tegra_num_powerdomains = 7; + break; + case TEGRA30: + tegra_num_powerdomains = 14; + tegra_num_cpu_domains = 4; + tegra_cpu_domains = tegra30_cpu_domains; + break; + default: + /* Unknown Tegra variant. Disable powergating */ + tegra_num_powerdomains = 0; + break; + } + + return 0; +} + #ifdef CONFIG_DEBUG_FS static const char * const powergate_name[] = { @@ -175,7 +216,7 @@ static int powergate_show(struct seq_file *s, void *data) seq_printf(s, " powergate powered\n"); seq_printf(s, "------------------\n"); - for (i = 0; i < TEGRA_NUM_POWERGATE; i++) + for (i = 0; i < tegra_num_powerdomains; i++) seq_printf(s, " %9s %7s\n", powergate_name[i], tegra_powergate_is_powered(i) ? "yes" : "no"); return 0; diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c new file mode 100644 index 000000000000..4d6a2ee99c3b --- /dev/null +++ b/arch/arm/mach-tegra/reset.c @@ -0,0 +1,84 @@ +/* + * arch/arm/mach-tegra/reset.c + * + * Copyright (C) 2011,2012 NVIDIA Corporation. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/cpumask.h> +#include <linux/bitops.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/cache-l2x0.h> + +#include <mach/iomap.h> +#include <mach/irammap.h> + +#include "reset.h" +#include "fuse.h" + +#define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \ + TEGRA_IRAM_RESET_HANDLER_OFFSET) + +static bool is_enabled; + +static void tegra_cpu_reset_handler_enable(void) +{ + void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); + void __iomem *evp_cpu_reset = + IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE + 0x100); + void __iomem *sb_ctrl = IO_ADDRESS(TEGRA_SB_BASE); + u32 reg; + + BUG_ON(is_enabled); + BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE); + + memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start, + tegra_cpu_reset_handler_size); + + /* + * NOTE: This must be the one and only write to the EVP CPU reset + * vector in the entire system. + */ + writel(TEGRA_IRAM_RESET_BASE + tegra_cpu_reset_handler_offset, + evp_cpu_reset); + wmb(); + reg = readl(evp_cpu_reset); + + /* + * Prevent further modifications to the physical reset vector. + * NOTE: Has no effect on chips prior to Tegra30. + */ + if (tegra_chip_id != TEGRA20) { + reg = readl(sb_ctrl); + reg |= 2; + writel(reg, sb_ctrl); + wmb(); + } + + is_enabled = true; +} + +void __init tegra_cpu_reset_handler_init(void) +{ + +#ifdef CONFIG_SMP + __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] = + *((u32 *)cpu_present_mask); + __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] = + virt_to_phys((void *)tegra_secondary_startup); +#endif + + tegra_cpu_reset_handler_enable(); +} diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h new file mode 100644 index 000000000000..de88bf851dd3 --- /dev/null +++ b/arch/arm/mach-tegra/reset.h @@ -0,0 +1,50 @@ +/* + * arch/arm/mach-tegra/reset.h + * + * CPU reset dispatcher. + * + * Copyright (c) 2011, NVIDIA Corporation. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_TEGRA_RESET_H +#define __MACH_TEGRA_RESET_H + +#define TEGRA_RESET_MASK_PRESENT 0 +#define TEGRA_RESET_MASK_LP1 1 +#define TEGRA_RESET_MASK_LP2 2 +#define TEGRA_RESET_STARTUP_SECONDARY 3 +#define TEGRA_RESET_STARTUP_LP2 4 +#define TEGRA_RESET_STARTUP_LP1 5 +#define TEGRA_RESET_DATA_SIZE 6 + +#ifndef __ASSEMBLY__ + +extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE]; + +void __tegra_cpu_reset_handler_start(void); +void __tegra_cpu_reset_handler(void); +void __tegra_cpu_reset_handler_end(void); +void tegra_secondary_startup(void); + +#define tegra_cpu_reset_handler_offset \ + ((u32)__tegra_cpu_reset_handler - \ + (u32)__tegra_cpu_reset_handler_start) + +#define tegra_cpu_reset_handler_size \ + (__tegra_cpu_reset_handler_end - \ + __tegra_cpu_reset_handler_start) + +void __init tegra_cpu_reset_handler_init(void); + +#endif +#endif diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S new file mode 100644 index 000000000000..8f9fde161c34 --- /dev/null +++ b/arch/arm/mach-tegra/sleep.S @@ -0,0 +1,91 @@ +/* + * arch/arm/mach-tegra/sleep.S + * + * Copyright (c) 2010-2011, NVIDIA Corporation. + * Copyright (c) 2011, Google, Inc. + * + * Author: Colin Cross <ccross@android.com> + * Gary King <gking@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/linkage.h> +#include <mach/io.h> +#include <mach/iomap.h> + +#include "flowctrl.h" + +#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \ + + IO_PPSB_VIRT) + +/* returns the offset of the flow controller halt register for a cpu */ +.macro cpu_to_halt_reg rd, rcpu + cmp \rcpu, #0 + subne \rd, \rcpu, #1 + movne \rd, \rd, lsl #3 + addne \rd, \rd, #0x14 + moveq \rd, #0 +.endm + +/* returns the offset of the flow controller csr register for a cpu */ +.macro cpu_to_csr_reg rd, rcpu + cmp \rcpu, #0 + subne \rd, \rcpu, #1 + movne \rd, \rd, lsl #3 + addne \rd, \rd, #0x18 + moveq \rd, #8 +.endm + +/* returns the ID of the current processor */ +.macro cpu_id, rd + mrc p15, 0, \rd, c0, c0, 5 + and \rd, \rd, #0xF +.endm + +/* loads a 32-bit value into a register without a data access */ +.macro mov32, reg, val + movw \reg, #:lower16:\val + movt \reg, #:upper16:\val +.endm + +/* + * tegra_cpu_wfi + * + * puts current CPU in clock-gated wfi using the flow controller + * + * corrupts r0-r3 + * must be called with MMU on + */ + +ENTRY(tegra_cpu_wfi) + cpu_id r0 + cpu_to_halt_reg r1, r0 + cpu_to_csr_reg r2, r0 + mov32 r0, TEGRA_FLOW_CTRL_VIRT + mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + str r3, [r0, r2] @ clear event & interrupt status + mov r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME + str r3, [r0, r1] @ put flow controller in wait irq mode + dsb + wfi + mov r3, #0 + str r3, [r0, r1] @ clear flow controller halt status + mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + str r3, [r0, r2] @ clear event & interrupt status + dsb + mov pc, lr +ENDPROC(tegra_cpu_wfi) + diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index ff9e6b6c0460..592a4eeb5328 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -720,7 +720,7 @@ static void tegra2_pllx_clk_init(struct clk *c) { tegra2_pll_clk_init(c); - if (tegra_sku_id() == 7) + if (tegra_sku_id == 7) c->max_rate = 750000000; } @@ -1143,15 +1143,35 @@ static void tegra2_emc_clk_init(struct clk *c) static long tegra2_emc_clk_round_rate(struct clk *c, unsigned long rate) { - long new_rate = rate; + long emc_rate; + long clk_rate; - new_rate = tegra_emc_round_rate(new_rate); - if (new_rate < 0) + /* + * The slowest entry in the EMC clock table that is at least as + * fast as rate. + */ + emc_rate = tegra_emc_round_rate(rate); + if (emc_rate < 0) return c->max_rate; - BUG_ON(new_rate != tegra2_periph_clk_round_rate(c, new_rate)); + /* + * The fastest rate the PLL will generate that is at most the + * requested rate. + */ + clk_rate = tegra2_periph_clk_round_rate(c, emc_rate); + + /* + * If this fails, and emc_rate > clk_rate, it's because the maximum + * rate in the EMC tables is larger than the maximum rate of the EMC + * clock. The EMC clock's max rate is the rate it was running when the + * kernel booted. Such a mismatch is probably due to using the wrong + * BCT, i.e. using a Tegra20 BCT with an EMC table written for Tegra25. + */ + WARN_ONCE(emc_rate != clk_rate, + "emc_rate %ld != clk_rate %ld", + emc_rate, clk_rate); - return new_rate; + return emc_rate; } static int tegra2_emc_clk_set_rate(struct clk *c, unsigned long rate) diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index 0f7ae6e90b55..5070d833bdd1 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -16,14 +16,19 @@ */ #include <linux/kernel.h> +#include <linux/device.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/platform_data/tegra_emc.h> #include <mach/iomap.h> #include "tegra2_emc.h" +#include "fuse.h" #ifdef CONFIG_TEGRA_EMC_SCALING_ENABLE static bool emc_enable = true; @@ -32,18 +37,17 @@ static bool emc_enable; #endif module_param(emc_enable, bool, 0644); -static void __iomem *emc = IO_ADDRESS(TEGRA_EMC_BASE); -static const struct tegra_emc_table *tegra_emc_table; -static int tegra_emc_table_size; +static struct platform_device *emc_pdev; +static void __iomem *emc_regbase; static inline void emc_writel(u32 val, unsigned long addr) { - writel(val, emc + addr); + writel(val, emc_regbase + addr); } static inline u32 emc_readl(unsigned long addr) { - return readl(emc + addr); + return readl(emc_regbase + addr); } static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = { @@ -98,15 +102,15 @@ static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = { /* Select the closest EMC rate that is higher than the requested rate */ long tegra_emc_round_rate(unsigned long rate) { + struct tegra_emc_pdata *pdata; int i; int best = -1; unsigned long distance = ULONG_MAX; - if (!tegra_emc_table) + if (!emc_pdev) return -EINVAL; - if (!emc_enable) - return -EINVAL; + pdata = emc_pdev->dev.platform_data; pr_debug("%s: %lu\n", __func__, rate); @@ -116,10 +120,10 @@ long tegra_emc_round_rate(unsigned long rate) */ rate = rate / 2 / 1000; - for (i = 0; i < tegra_emc_table_size; i++) { - if (tegra_emc_table[i].rate >= rate && - (tegra_emc_table[i].rate - rate) < distance) { - distance = tegra_emc_table[i].rate - rate; + for (i = 0; i < pdata->num_tables; i++) { + if (pdata->tables[i].rate >= rate && + (pdata->tables[i].rate - rate) < distance) { + distance = pdata->tables[i].rate - rate; best = i; } } @@ -127,9 +131,9 @@ long tegra_emc_round_rate(unsigned long rate) if (best < 0) return -EINVAL; - pr_debug("%s: using %lu\n", __func__, tegra_emc_table[best].rate); + pr_debug("%s: using %lu\n", __func__, pdata->tables[best].rate); - return tegra_emc_table[best].rate * 2 * 1000; + return pdata->tables[best].rate * 2 * 1000; } /* @@ -142,37 +146,211 @@ long tegra_emc_round_rate(unsigned long rate) */ int tegra_emc_set_rate(unsigned long rate) { + struct tegra_emc_pdata *pdata; int i; int j; - if (!tegra_emc_table) + if (!emc_pdev) return -EINVAL; + pdata = emc_pdev->dev.platform_data; + /* * The EMC clock rate is twice the bus rate, and the bus rate is * measured in kHz */ rate = rate / 2 / 1000; - for (i = 0; i < tegra_emc_table_size; i++) - if (tegra_emc_table[i].rate == rate) + for (i = 0; i < pdata->num_tables; i++) + if (pdata->tables[i].rate == rate) break; - if (i >= tegra_emc_table_size) + if (i >= pdata->num_tables) return -EINVAL; pr_debug("%s: setting to %lu\n", __func__, rate); for (j = 0; j < TEGRA_EMC_NUM_REGS; j++) - emc_writel(tegra_emc_table[i].regs[j], emc_reg_addr[j]); + emc_writel(pdata->tables[i].regs[j], emc_reg_addr[j]); - emc_readl(tegra_emc_table[i].regs[TEGRA_EMC_NUM_REGS - 1]); + emc_readl(pdata->tables[i].regs[TEGRA_EMC_NUM_REGS - 1]); return 0; } -void tegra_init_emc(const struct tegra_emc_table *table, int table_size) +#ifdef CONFIG_OF +static struct device_node *tegra_emc_ramcode_devnode(struct device_node *np) +{ + struct device_node *iter; + u32 reg; + + for_each_child_of_node(np, iter) { + if (of_property_read_u32(np, "nvidia,ram-code", ®)) + continue; + if (reg == tegra_bct_strapping) + return of_node_get(iter); + } + + return NULL; +} + +static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata( + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *tnp, *iter; + struct tegra_emc_pdata *pdata; + int ret, i, num_tables; + + if (!np) + return NULL; + + if (of_find_property(np, "nvidia,use-ram-code", NULL)) { + tnp = tegra_emc_ramcode_devnode(np); + if (!tnp) + dev_warn(&pdev->dev, + "can't find emc table for ram-code 0x%02x\n", + tegra_bct_strapping); + } else + tnp = of_node_get(np); + + if (!tnp) + return NULL; + + num_tables = 0; + for_each_child_of_node(tnp, iter) + if (of_device_is_compatible(iter, "nvidia,tegra20-emc-table")) + num_tables++; + + if (!num_tables) { + pdata = NULL; + goto out; + } + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + pdata->tables = devm_kzalloc(&pdev->dev, + sizeof(*pdata->tables) * num_tables, + GFP_KERNEL); + + i = 0; + for_each_child_of_node(tnp, iter) { + u32 prop; + + ret = of_property_read_u32(iter, "clock-frequency", &prop); + if (ret) { + dev_err(&pdev->dev, "no clock-frequency in %s\n", + iter->full_name); + continue; + } + pdata->tables[i].rate = prop; + + ret = of_property_read_u32_array(iter, "nvidia,emc-registers", + pdata->tables[i].regs, + TEGRA_EMC_NUM_REGS); + if (ret) { + dev_err(&pdev->dev, + "malformed emc-registers property in %s\n", + iter->full_name); + continue; + } + + i++; + } + pdata->num_tables = i; + +out: + of_node_put(tnp); + return pdata; +} +#else +static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata( + struct platform_device *pdev) +{ + return NULL; +} +#endif + +static struct tegra_emc_pdata __devinit *tegra_emc_fill_pdata(struct platform_device *pdev) +{ + struct clk *c = clk_get_sys(NULL, "emc"); + struct tegra_emc_pdata *pdata; + unsigned long khz; + int i; + + WARN_ON(pdev->dev.platform_data); + BUG_ON(IS_ERR_OR_NULL(c)); + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + pdata->tables = devm_kzalloc(&pdev->dev, sizeof(*pdata->tables), + GFP_KERNEL); + + pdata->tables[0].rate = clk_get_rate(c) / 2 / 1000; + + for (i = 0; i < TEGRA_EMC_NUM_REGS; i++) + pdata->tables[0].regs[i] = emc_readl(emc_reg_addr[i]); + + pdata->num_tables = 1; + + khz = pdata->tables[0].rate; + dev_info(&pdev->dev, "no tables provided, using %ld kHz emc, " + "%ld kHz mem\n", khz * 2, khz); + + return pdata; +} + +static int __devinit tegra_emc_probe(struct platform_device *pdev) +{ + struct tegra_emc_pdata *pdata; + struct resource *res; + + if (!emc_enable) { + dev_err(&pdev->dev, "disabled per module parameter\n"); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing register base\n"); + return -ENOMEM; + } + + emc_regbase = devm_request_and_ioremap(&pdev->dev, res); + if (!emc_regbase) { + dev_err(&pdev->dev, "failed to remap registers\n"); + return -ENOMEM; + } + + pdata = pdev->dev.platform_data; + + if (!pdata) + pdata = tegra_emc_dt_parse_pdata(pdev); + + if (!pdata) + pdata = tegra_emc_fill_pdata(pdev); + + pdev->dev.platform_data = pdata; + + emc_pdev = pdev; + + return 0; +} + +static struct of_device_id tegra_emc_of_match[] __devinitdata = { + { .compatible = "nvidia,tegra20-emc", }, + { }, +}; + +static struct platform_driver tegra_emc_driver = { + .driver = { + .name = "tegra-emc", + .owner = THIS_MODULE, + .of_match_table = tegra_emc_of_match, + }, + .probe = tegra_emc_probe, +}; + +static int __init tegra_emc_init(void) { - tegra_emc_table = table; - tegra_emc_table_size = table_size; + return platform_driver_register(&tegra_emc_driver); } +device_initcall(tegra_emc_init); diff --git a/arch/arm/mach-tegra/tegra2_emc.h b/arch/arm/mach-tegra/tegra2_emc.h index 19f08cb31603..f61409b54cb7 100644 --- a/arch/arm/mach-tegra/tegra2_emc.h +++ b/arch/arm/mach-tegra/tegra2_emc.h @@ -15,13 +15,10 @@ * */ -#define TEGRA_EMC_NUM_REGS 46 - -struct tegra_emc_table { - unsigned long rate; - u32 regs[TEGRA_EMC_NUM_REGS]; -}; +#ifndef __MACH_TEGRA_TEGRA2_EMC_H_ +#define __MACH_TEGRA_TEGRA2_EMC_H int tegra_emc_set_rate(unsigned long rate); long tegra_emc_round_rate(unsigned long rate); -void tegra_init_emc(const struct tegra_emc_table *table, int table_size); + +#endif diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c new file mode 100644 index 000000000000..6d08b53f92d2 --- /dev/null +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -0,0 +1,3099 @@ +/* + * arch/arm/mach-tegra/tegra30_clocks.c + * + * Copyright (c) 2010-2011 NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/syscore_ops.h> + +#include <asm/clkdev.h> + +#include <mach/iomap.h> + +#include "clock.h" +#include "fuse.h" + +#define USE_PLL_LOCK_BITS 0 + +#define RST_DEVICES_L 0x004 +#define RST_DEVICES_H 0x008 +#define RST_DEVICES_U 0x00C +#define RST_DEVICES_V 0x358 +#define RST_DEVICES_W 0x35C +#define RST_DEVICES_SET_L 0x300 +#define RST_DEVICES_CLR_L 0x304 +#define RST_DEVICES_SET_V 0x430 +#define RST_DEVICES_CLR_V 0x434 +#define RST_DEVICES_NUM 5 + +#define CLK_OUT_ENB_L 0x010 +#define CLK_OUT_ENB_H 0x014 +#define CLK_OUT_ENB_U 0x018 +#define CLK_OUT_ENB_V 0x360 +#define CLK_OUT_ENB_W 0x364 +#define CLK_OUT_ENB_SET_L 0x320 +#define CLK_OUT_ENB_CLR_L 0x324 +#define CLK_OUT_ENB_SET_V 0x440 +#define CLK_OUT_ENB_CLR_V 0x444 +#define CLK_OUT_ENB_NUM 5 + +#define RST_DEVICES_V_SWR_CPULP_RST_DIS (0x1 << 1) +#define CLK_OUT_ENB_V_CLK_ENB_CPULP_EN (0x1 << 1) + +#define PERIPH_CLK_TO_BIT(c) (1 << (c->u.periph.clk_num % 32)) +#define PERIPH_CLK_TO_RST_REG(c) \ + periph_clk_to_reg((c), RST_DEVICES_L, RST_DEVICES_V, 4) +#define PERIPH_CLK_TO_RST_SET_REG(c) \ + periph_clk_to_reg((c), RST_DEVICES_SET_L, RST_DEVICES_SET_V, 8) +#define PERIPH_CLK_TO_RST_CLR_REG(c) \ + periph_clk_to_reg((c), RST_DEVICES_CLR_L, RST_DEVICES_CLR_V, 8) + +#define PERIPH_CLK_TO_ENB_REG(c) \ + periph_clk_to_reg((c), CLK_OUT_ENB_L, CLK_OUT_ENB_V, 4) +#define PERIPH_CLK_TO_ENB_SET_REG(c) \ + periph_clk_to_reg((c), CLK_OUT_ENB_SET_L, CLK_OUT_ENB_SET_V, 8) +#define PERIPH_CLK_TO_ENB_CLR_REG(c) \ + periph_clk_to_reg((c), CLK_OUT_ENB_CLR_L, CLK_OUT_ENB_CLR_V, 8) + +#define CLK_MASK_ARM 0x44 +#define MISC_CLK_ENB 0x48 + +#define OSC_CTRL 0x50 +#define OSC_CTRL_OSC_FREQ_MASK (0xF<<28) +#define OSC_CTRL_OSC_FREQ_13MHZ (0x0<<28) +#define OSC_CTRL_OSC_FREQ_19_2MHZ (0x4<<28) +#define OSC_CTRL_OSC_FREQ_12MHZ (0x8<<28) +#define OSC_CTRL_OSC_FREQ_26MHZ (0xC<<28) +#define OSC_CTRL_OSC_FREQ_16_8MHZ (0x1<<28) +#define OSC_CTRL_OSC_FREQ_38_4MHZ (0x5<<28) +#define OSC_CTRL_OSC_FREQ_48MHZ (0x9<<28) +#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK) + +#define OSC_CTRL_PLL_REF_DIV_MASK (3<<26) +#define OSC_CTRL_PLL_REF_DIV_1 (0<<26) +#define OSC_CTRL_PLL_REF_DIV_2 (1<<26) +#define OSC_CTRL_PLL_REF_DIV_4 (2<<26) + +#define OSC_FREQ_DET 0x58 +#define OSC_FREQ_DET_TRIG (1<<31) + +#define OSC_FREQ_DET_STATUS 0x5C +#define OSC_FREQ_DET_BUSY (1<<31) +#define OSC_FREQ_DET_CNT_MASK 0xFFFF + +#define PERIPH_CLK_SOURCE_I2S1 0x100 +#define PERIPH_CLK_SOURCE_EMC 0x19c +#define PERIPH_CLK_SOURCE_OSC 0x1fc +#define PERIPH_CLK_SOURCE_NUM1 \ + ((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4) + +#define PERIPH_CLK_SOURCE_G3D2 0x3b0 +#define PERIPH_CLK_SOURCE_SE 0x42c +#define PERIPH_CLK_SOURCE_NUM2 \ + ((PERIPH_CLK_SOURCE_SE - PERIPH_CLK_SOURCE_G3D2) / 4 + 1) + +#define AUDIO_DLY_CLK 0x49c +#define AUDIO_SYNC_CLK_SPDIF 0x4b4 +#define PERIPH_CLK_SOURCE_NUM3 \ + ((AUDIO_SYNC_CLK_SPDIF - AUDIO_DLY_CLK) / 4 + 1) + +#define PERIPH_CLK_SOURCE_NUM (PERIPH_CLK_SOURCE_NUM1 + \ + PERIPH_CLK_SOURCE_NUM2 + \ + PERIPH_CLK_SOURCE_NUM3) + +#define CPU_SOFTRST_CTRL 0x380 + +#define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF +#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF +#define PERIPH_CLK_SOURCE_DIV_SHIFT 0 +#define PERIPH_CLK_SOURCE_DIVIDLE_SHIFT 8 +#define PERIPH_CLK_SOURCE_DIVIDLE_VAL 50 +#define PERIPH_CLK_UART_DIV_ENB (1<<24) +#define PERIPH_CLK_VI_SEL_EX_SHIFT 24 +#define PERIPH_CLK_VI_SEL_EX_MASK (0x3<<PERIPH_CLK_VI_SEL_EX_SHIFT) +#define PERIPH_CLK_NAND_DIV_EX_ENB (1<<8) +#define PERIPH_CLK_DTV_POLARITY_INV (1<<25) + +#define AUDIO_SYNC_SOURCE_MASK 0x0F +#define AUDIO_SYNC_DISABLE_BIT 0x10 +#define AUDIO_SYNC_TAP_NIBBLE_SHIFT(c) ((c->reg_shift - 24) * 4) + +#define PLL_BASE 0x0 +#define PLL_BASE_BYPASS (1<<31) +#define PLL_BASE_ENABLE (1<<30) +#define PLL_BASE_REF_ENABLE (1<<29) +#define PLL_BASE_OVERRIDE (1<<28) +#define PLL_BASE_LOCK (1<<27) +#define PLL_BASE_DIVP_MASK (0x7<<20) +#define PLL_BASE_DIVP_SHIFT 20 +#define PLL_BASE_DIVN_MASK (0x3FF<<8) +#define PLL_BASE_DIVN_SHIFT 8 +#define PLL_BASE_DIVM_MASK (0x1F) +#define PLL_BASE_DIVM_SHIFT 0 + +#define PLL_OUT_RATIO_MASK (0xFF<<8) +#define PLL_OUT_RATIO_SHIFT 8 +#define PLL_OUT_OVERRIDE (1<<2) +#define PLL_OUT_CLKEN (1<<1) +#define PLL_OUT_RESET_DISABLE (1<<0) + +#define PLL_MISC(c) \ + (((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc) +#define PLL_MISC_LOCK_ENABLE(c) \ + (((c)->flags & (PLLU | PLLD)) ? (1<<22) : (1<<18)) + +#define PLL_MISC_DCCON_SHIFT 20 +#define PLL_MISC_CPCON_SHIFT 8 +#define PLL_MISC_CPCON_MASK (0xF<<PLL_MISC_CPCON_SHIFT) +#define PLL_MISC_LFCON_SHIFT 4 +#define PLL_MISC_LFCON_MASK (0xF<<PLL_MISC_LFCON_SHIFT) +#define PLL_MISC_VCOCON_SHIFT 0 +#define PLL_MISC_VCOCON_MASK (0xF<<PLL_MISC_VCOCON_SHIFT) +#define PLLD_MISC_CLKENABLE (1<<30) + +#define PLLU_BASE_POST_DIV (1<<20) + +#define PLLD_BASE_DSIB_MUX_SHIFT 25 +#define PLLD_BASE_DSIB_MUX_MASK (1<<PLLD_BASE_DSIB_MUX_SHIFT) +#define PLLD_BASE_CSI_CLKENABLE (1<<26) +#define PLLD_MISC_DSI_CLKENABLE (1<<30) +#define PLLD_MISC_DIV_RST (1<<23) +#define PLLD_MISC_DCCON_SHIFT 12 + +#define PLLDU_LFCON_SET_DIVN 600 + +/* FIXME: OUT_OF_TABLE_CPCON per pll */ +#define OUT_OF_TABLE_CPCON 0x8 + +#define SUPER_CLK_MUX 0x00 +#define SUPER_STATE_SHIFT 28 +#define SUPER_STATE_MASK (0xF << SUPER_STATE_SHIFT) +#define SUPER_STATE_STANDBY (0x0 << SUPER_STATE_SHIFT) +#define SUPER_STATE_IDLE (0x1 << SUPER_STATE_SHIFT) +#define SUPER_STATE_RUN (0x2 << SUPER_STATE_SHIFT) +#define SUPER_STATE_IRQ (0x3 << SUPER_STATE_SHIFT) +#define SUPER_STATE_FIQ (0x4 << SUPER_STATE_SHIFT) +#define SUPER_LP_DIV2_BYPASS (0x1 << 16) +#define SUPER_SOURCE_MASK 0xF +#define SUPER_FIQ_SOURCE_SHIFT 12 +#define SUPER_IRQ_SOURCE_SHIFT 8 +#define SUPER_RUN_SOURCE_SHIFT 4 +#define SUPER_IDLE_SOURCE_SHIFT 0 + +#define SUPER_CLK_DIVIDER 0x04 +#define SUPER_CLOCK_DIV_U71_SHIFT 16 +#define SUPER_CLOCK_DIV_U71_MASK (0xff << SUPER_CLOCK_DIV_U71_SHIFT) +/* guarantees safe cpu backup */ +#define SUPER_CLOCK_DIV_U71_MIN 0x2 + +#define BUS_CLK_DISABLE (1<<3) +#define BUS_CLK_DIV_MASK 0x3 + +#define PMC_CTRL 0x0 + #define PMC_CTRL_BLINK_ENB (1 << 7) + +#define PMC_DPD_PADS_ORIDE 0x1c + #define PMC_DPD_PADS_ORIDE_BLINK_ENB (1 << 20) + +#define PMC_BLINK_TIMER_DATA_ON_SHIFT 0 +#define PMC_BLINK_TIMER_DATA_ON_MASK 0x7fff +#define PMC_BLINK_TIMER_ENB (1 << 15) +#define PMC_BLINK_TIMER_DATA_OFF_SHIFT 16 +#define PMC_BLINK_TIMER_DATA_OFF_MASK 0xffff + +#define PMC_PLLP_WB0_OVERRIDE 0xf8 +#define PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE (1 << 12) + +#define UTMIP_PLL_CFG2 0x488 +#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6) +#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN (1 << 0) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN (1 << 2) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN (1 << 4) + +#define UTMIP_PLL_CFG1 0x484 +#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) +#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) +#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN (1 << 14) +#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN (1 << 12) +#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN (1 << 16) + +#define PLLE_BASE_CML_ENABLE (1<<31) +#define PLLE_BASE_ENABLE (1<<30) +#define PLLE_BASE_DIVCML_SHIFT 24 +#define PLLE_BASE_DIVCML_MASK (0xf<<PLLE_BASE_DIVCML_SHIFT) +#define PLLE_BASE_DIVP_SHIFT 16 +#define PLLE_BASE_DIVP_MASK (0x3f<<PLLE_BASE_DIVP_SHIFT) +#define PLLE_BASE_DIVN_SHIFT 8 +#define PLLE_BASE_DIVN_MASK (0xFF<<PLLE_BASE_DIVN_SHIFT) +#define PLLE_BASE_DIVM_SHIFT 0 +#define PLLE_BASE_DIVM_MASK (0xFF<<PLLE_BASE_DIVM_SHIFT) +#define PLLE_BASE_DIV_MASK \ + (PLLE_BASE_DIVCML_MASK | PLLE_BASE_DIVP_MASK | \ + PLLE_BASE_DIVN_MASK | PLLE_BASE_DIVM_MASK) +#define PLLE_BASE_DIV(m, n, p, cml) \ + (((cml)<<PLLE_BASE_DIVCML_SHIFT) | ((p)<<PLLE_BASE_DIVP_SHIFT) | \ + ((n)<<PLLE_BASE_DIVN_SHIFT) | ((m)<<PLLE_BASE_DIVM_SHIFT)) + +#define PLLE_MISC_SETUP_BASE_SHIFT 16 +#define PLLE_MISC_SETUP_BASE_MASK (0xFFFF<<PLLE_MISC_SETUP_BASE_SHIFT) +#define PLLE_MISC_READY (1<<15) +#define PLLE_MISC_LOCK (1<<11) +#define PLLE_MISC_LOCK_ENABLE (1<<9) +#define PLLE_MISC_SETUP_EX_SHIFT 2 +#define PLLE_MISC_SETUP_EX_MASK (0x3<<PLLE_MISC_SETUP_EX_SHIFT) +#define PLLE_MISC_SETUP_MASK \ + (PLLE_MISC_SETUP_BASE_MASK | PLLE_MISC_SETUP_EX_MASK) +#define PLLE_MISC_SETUP_VALUE \ + ((0x7<<PLLE_MISC_SETUP_BASE_SHIFT) | (0x0<<PLLE_MISC_SETUP_EX_SHIFT)) + +#define PLLE_SS_CTRL 0x68 +#define PLLE_SS_INCINTRV_SHIFT 24 +#define PLLE_SS_INCINTRV_MASK (0x3f<<PLLE_SS_INCINTRV_SHIFT) +#define PLLE_SS_INC_SHIFT 16 +#define PLLE_SS_INC_MASK (0xff<<PLLE_SS_INC_SHIFT) +#define PLLE_SS_MAX_SHIFT 0 +#define PLLE_SS_MAX_MASK (0x1ff<<PLLE_SS_MAX_SHIFT) +#define PLLE_SS_COEFFICIENTS_MASK \ + (PLLE_SS_INCINTRV_MASK | PLLE_SS_INC_MASK | PLLE_SS_MAX_MASK) +#define PLLE_SS_COEFFICIENTS_12MHZ \ + ((0x18<<PLLE_SS_INCINTRV_SHIFT) | (0x1<<PLLE_SS_INC_SHIFT) | \ + (0x24<<PLLE_SS_MAX_SHIFT)) +#define PLLE_SS_DISABLE ((1<<12) | (1<<11) | (1<<10)) + +#define PLLE_AUX 0x48c +#define PLLE_AUX_PLLP_SEL (1<<2) +#define PLLE_AUX_CML_SATA_ENABLE (1<<1) +#define PLLE_AUX_CML_PCIE_ENABLE (1<<0) + +#define PMC_SATA_PWRGT 0x1ac +#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE (1<<5) +#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1<<4) + +#define ROUND_DIVIDER_UP 0 +#define ROUND_DIVIDER_DOWN 1 + +/* FIXME: recommended safety delay after lock is detected */ +#define PLL_POST_LOCK_DELAY 100 + +/** +* Structure defining the fields for USB UTMI clocks Parameters. +*/ +struct utmi_clk_param { + /* Oscillator Frequency in KHz */ + u32 osc_frequency; + /* UTMIP PLL Enable Delay Count */ + u8 enable_delay_count; + /* UTMIP PLL Stable count */ + u8 stable_count; + /* UTMIP PLL Active delay count */ + u8 active_delay_count; + /* UTMIP PLL Xtal frequency count */ + u8 xtal_freq_count; +}; + +static const struct utmi_clk_param utmi_parameters[] = { + { + .osc_frequency = 13000000, + .enable_delay_count = 0x02, + .stable_count = 0x33, + .active_delay_count = 0x05, + .xtal_freq_count = 0x7F + }, + { + .osc_frequency = 19200000, + .enable_delay_count = 0x03, + .stable_count = 0x4B, + .active_delay_count = 0x06, + .xtal_freq_count = 0xBB}, + { + .osc_frequency = 12000000, + .enable_delay_count = 0x02, + .stable_count = 0x2F, + .active_delay_count = 0x04, + .xtal_freq_count = 0x76 + }, + { + .osc_frequency = 26000000, + .enable_delay_count = 0x04, + .stable_count = 0x66, + .active_delay_count = 0x09, + .xtal_freq_count = 0xFE + }, + { + .osc_frequency = 16800000, + .enable_delay_count = 0x03, + .stable_count = 0x41, + .active_delay_count = 0x0A, + .xtal_freq_count = 0xA4 + }, +}; + +static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE); +static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); +static void __iomem *misc_gp_hidrev_base = IO_ADDRESS(TEGRA_APB_MISC_BASE); + +#define MISC_GP_HIDREV 0x804 + +/* + * Some peripheral clocks share an enable bit, so refcount the enable bits + * in registers CLK_ENABLE_L, ... CLK_ENABLE_W + */ +static int tegra_periph_clk_enable_refcount[CLK_OUT_ENB_NUM * 32]; + +#define clk_writel(value, reg) \ + __raw_writel(value, (u32)reg_clk_base + (reg)) +#define clk_readl(reg) \ + __raw_readl((u32)reg_clk_base + (reg)) +#define pmc_writel(value, reg) \ + __raw_writel(value, (u32)reg_pmc_base + (reg)) +#define pmc_readl(reg) \ + __raw_readl((u32)reg_pmc_base + (reg)) +#define chipid_readl() \ + __raw_readl((u32)misc_gp_hidrev_base + MISC_GP_HIDREV) + +#define clk_writel_delay(value, reg) \ + do { \ + __raw_writel((value), (u32)reg_clk_base + (reg)); \ + udelay(2); \ + } while (0) + + +static inline int clk_set_div(struct clk *c, u32 n) +{ + return clk_set_rate(c, (clk_get_rate(c->parent) + n-1) / n); +} + +static inline u32 periph_clk_to_reg( + struct clk *c, u32 reg_L, u32 reg_V, int offs) +{ + u32 reg = c->u.periph.clk_num / 32; + BUG_ON(reg >= RST_DEVICES_NUM); + if (reg < 3) + reg = reg_L + (reg * offs); + else + reg = reg_V + ((reg - 3) * offs); + return reg; +} + +static unsigned long clk_measure_input_freq(void) +{ + u32 clock_autodetect; + clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET); + do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY); + clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS); + if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) { + return 12000000; + } else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) { + return 13000000; + } else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) { + return 19200000; + } else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) { + return 26000000; + } else if (clock_autodetect >= 1025 - 3 && clock_autodetect <= 1025 + 3) { + return 16800000; + } else if (clock_autodetect >= 2344 - 3 && clock_autodetect <= 2344 + 3) { + return 38400000; + } else if (clock_autodetect >= 2928 - 3 && clock_autodetect <= 2928 + 3) { + return 48000000; + } else { + pr_err("%s: Unexpected clock autodetect value %d", __func__, + clock_autodetect); + BUG(); + return 0; + } +} + +static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate, + u32 flags, u32 round_mode) +{ + s64 divider_u71 = parent_rate; + if (!rate) + return -EINVAL; + + if (!(flags & DIV_U71_INT)) + divider_u71 *= 2; + if (round_mode == ROUND_DIVIDER_UP) + divider_u71 += rate - 1; + do_div(divider_u71, rate); + if (flags & DIV_U71_INT) + divider_u71 *= 2; + + if (divider_u71 - 2 < 0) + return 0; + + if (divider_u71 - 2 > 255) + return -EINVAL; + + return divider_u71 - 2; +} + +static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate) +{ + s64 divider_u16; + + divider_u16 = parent_rate; + if (!rate) + return -EINVAL; + divider_u16 += rate - 1; + do_div(divider_u16, rate); + + if (divider_u16 - 1 < 0) + return 0; + + if (divider_u16 - 1 > 0xFFFF) + return -EINVAL; + + return divider_u16 - 1; +} + +/* clk_m functions */ +static unsigned long tegra30_clk_m_autodetect_rate(struct clk *c) +{ + u32 osc_ctrl = clk_readl(OSC_CTRL); + u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK; + u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK; + + c->rate = clk_measure_input_freq(); + switch (c->rate) { + case 12000000: + auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ; + BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); + break; + case 13000000: + auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ; + BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); + break; + case 19200000: + auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ; + BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); + break; + case 26000000: + auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ; + BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); + break; + case 16800000: + auto_clock_control |= OSC_CTRL_OSC_FREQ_16_8MHZ; + BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); + break; + case 38400000: + auto_clock_control |= OSC_CTRL_OSC_FREQ_38_4MHZ; + BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_2); + break; + case 48000000: + auto_clock_control |= OSC_CTRL_OSC_FREQ_48MHZ; + BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4); + break; + default: + pr_err("%s: Unexpected clock rate %ld", __func__, c->rate); + BUG(); + } + clk_writel(auto_clock_control, OSC_CTRL); + return c->rate; +} + +static void tegra30_clk_m_init(struct clk *c) +{ + pr_debug("%s on clock %s\n", __func__, c->name); + tegra30_clk_m_autodetect_rate(c); +} + +static int tegra30_clk_m_enable(struct clk *c) +{ + pr_debug("%s on clock %s\n", __func__, c->name); + return 0; +} + +static void tegra30_clk_m_disable(struct clk *c) +{ + pr_debug("%s on clock %s\n", __func__, c->name); + WARN(1, "Attempting to disable main SoC clock\n"); +} + +static struct clk_ops tegra_clk_m_ops = { + .init = tegra30_clk_m_init, + .enable = tegra30_clk_m_enable, + .disable = tegra30_clk_m_disable, +}; + +static struct clk_ops tegra_clk_m_div_ops = { + .enable = tegra30_clk_m_enable, +}; + +/* PLL reference divider functions */ +static void tegra30_pll_ref_init(struct clk *c) +{ + u32 pll_ref_div = clk_readl(OSC_CTRL) & OSC_CTRL_PLL_REF_DIV_MASK; + pr_debug("%s on clock %s\n", __func__, c->name); + + switch (pll_ref_div) { + case OSC_CTRL_PLL_REF_DIV_1: + c->div = 1; + break; + case OSC_CTRL_PLL_REF_DIV_2: + c->div = 2; + break; + case OSC_CTRL_PLL_REF_DIV_4: + c->div = 4; + break; + default: + pr_err("%s: Invalid pll ref divider %d", __func__, pll_ref_div); + BUG(); + } + c->mul = 1; + c->state = ON; +} + +static struct clk_ops tegra_pll_ref_ops = { + .init = tegra30_pll_ref_init, + .enable = tegra30_clk_m_enable, + .disable = tegra30_clk_m_disable, +}; + +/* super clock functions */ +/* "super clocks" on tegra30 have two-stage muxes, fractional 7.1 divider and + * clock skipping super divider. We will ignore the clock skipping divider, + * since we can't lower the voltage when using the clock skip, but we can if + * we lower the PLL frequency. We will use 7.1 divider for CPU super-clock + * only when its parent is a fixed rate PLL, since we can't change PLL rate + * in this case. + */ +static void tegra30_super_clk_init(struct clk *c) +{ + u32 val; + int source; + int shift; + const struct clk_mux_sel *sel; + val = clk_readl(c->reg + SUPER_CLK_MUX); + c->state = ON; + BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) && + ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE)); + shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ? + SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT; + source = (val >> shift) & SUPER_SOURCE_MASK; + if (c->flags & DIV_2) + source |= val & SUPER_LP_DIV2_BYPASS; + for (sel = c->inputs; sel->input != NULL; sel++) { + if (sel->value == source) + break; + } + BUG_ON(sel->input == NULL); + c->parent = sel->input; + + if (c->flags & DIV_U71) { + /* Init safe 7.1 divider value (does not affect PLLX path) */ + clk_writel(SUPER_CLOCK_DIV_U71_MIN << SUPER_CLOCK_DIV_U71_SHIFT, + c->reg + SUPER_CLK_DIVIDER); + c->mul = 2; + c->div = 2; + if (!(c->parent->flags & PLLX)) + c->div += SUPER_CLOCK_DIV_U71_MIN; + } else + clk_writel(0, c->reg + SUPER_CLK_DIVIDER); +} + +static int tegra30_super_clk_enable(struct clk *c) +{ + return 0; +} + +static void tegra30_super_clk_disable(struct clk *c) +{ + /* since tegra 3 has 2 CPU super clocks - low power lp-mode clock and + geared up g-mode super clock - mode switch may request to disable + either of them; accept request with no affect on h/w */ +} + +static int tegra30_super_clk_set_parent(struct clk *c, struct clk *p) +{ + u32 val; + const struct clk_mux_sel *sel; + int shift; + + val = clk_readl(c->reg + SUPER_CLK_MUX); + BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) && + ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE)); + shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ? + SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT; + for (sel = c->inputs; sel->input != NULL; sel++) { + if (sel->input == p) { + /* For LP mode super-clock switch between PLLX direct + and divided-by-2 outputs is allowed only when other + than PLLX clock source is current parent */ + if ((c->flags & DIV_2) && (p->flags & PLLX) && + ((sel->value ^ val) & SUPER_LP_DIV2_BYPASS)) { + if (c->parent->flags & PLLX) + return -EINVAL; + val ^= SUPER_LP_DIV2_BYPASS; + clk_writel_delay(val, c->reg); + } + val &= ~(SUPER_SOURCE_MASK << shift); + val |= (sel->value & SUPER_SOURCE_MASK) << shift; + + /* 7.1 divider for CPU super-clock does not affect + PLLX path */ + if (c->flags & DIV_U71) { + u32 div = 0; + if (!(p->flags & PLLX)) { + div = clk_readl(c->reg + + SUPER_CLK_DIVIDER); + div &= SUPER_CLOCK_DIV_U71_MASK; + div >>= SUPER_CLOCK_DIV_U71_SHIFT; + } + c->div = div + 2; + c->mul = 2; + } + + if (c->refcnt) + clk_enable(p); + + clk_writel_delay(val, c->reg); + + if (c->refcnt && c->parent) + clk_disable(c->parent); + + clk_reparent(c, p); + return 0; + } + } + return -EINVAL; +} + +/* + * Do not use super clocks "skippers", since dividing using a clock skipper + * does not allow the voltage to be scaled down. Instead adjust the rate of + * the parent clock. This requires that the parent of a super clock have no + * other children, otherwise the rate will change underneath the other + * children. Special case: if fixed rate PLL is CPU super clock parent the + * rate of this PLL can't be changed, and it has many other children. In + * this case use 7.1 fractional divider to adjust the super clock rate. + */ +static int tegra30_super_clk_set_rate(struct clk *c, unsigned long rate) +{ + if ((c->flags & DIV_U71) && (c->parent->flags & PLL_FIXED)) { + int div = clk_div71_get_divider(c->parent->u.pll.fixed_rate, + rate, c->flags, ROUND_DIVIDER_DOWN); + div = max(div, SUPER_CLOCK_DIV_U71_MIN); + + clk_writel(div << SUPER_CLOCK_DIV_U71_SHIFT, + c->reg + SUPER_CLK_DIVIDER); + c->div = div + 2; + c->mul = 2; + return 0; + } + return clk_set_rate(c->parent, rate); +} + +static struct clk_ops tegra_super_ops = { + .init = tegra30_super_clk_init, + .enable = tegra30_super_clk_enable, + .disable = tegra30_super_clk_disable, + .set_parent = tegra30_super_clk_set_parent, + .set_rate = tegra30_super_clk_set_rate, +}; + +static int tegra30_twd_clk_set_rate(struct clk *c, unsigned long rate) +{ + /* The input value 'rate' is the clock rate of the CPU complex. */ + c->rate = (rate * c->mul) / c->div; + return 0; +} + +static struct clk_ops tegra30_twd_ops = { + .set_rate = tegra30_twd_clk_set_rate, +}; + +/* Blink output functions */ + +static void tegra30_blink_clk_init(struct clk *c) +{ + u32 val; + + val = pmc_readl(PMC_CTRL); + c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF; + c->mul = 1; + val = pmc_readl(c->reg); + + if (val & PMC_BLINK_TIMER_ENB) { + unsigned int on_off; + + on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) & + PMC_BLINK_TIMER_DATA_ON_MASK; + val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT; + val &= PMC_BLINK_TIMER_DATA_OFF_MASK; + on_off += val; + /* each tick in the blink timer is 4 32KHz clocks */ + c->div = on_off * 4; + } else { + c->div = 1; + } +} + +static int tegra30_blink_clk_enable(struct clk *c) +{ + u32 val; + + val = pmc_readl(PMC_DPD_PADS_ORIDE); + pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE); + + val = pmc_readl(PMC_CTRL); + pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL); + + return 0; +} + +static void tegra30_blink_clk_disable(struct clk *c) +{ + u32 val; + + val = pmc_readl(PMC_CTRL); + pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL); + + val = pmc_readl(PMC_DPD_PADS_ORIDE); + pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE); +} + +static int tegra30_blink_clk_set_rate(struct clk *c, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(c->parent); + if (rate >= parent_rate) { + c->div = 1; + pmc_writel(0, c->reg); + } else { + unsigned int on_off; + u32 val; + + on_off = DIV_ROUND_UP(parent_rate / 8, rate); + c->div = on_off * 8; + + val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) << + PMC_BLINK_TIMER_DATA_ON_SHIFT; + on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK; + on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT; + val |= on_off; + val |= PMC_BLINK_TIMER_ENB; + pmc_writel(val, c->reg); + } + + return 0; +} + +static struct clk_ops tegra_blink_clk_ops = { + .init = &tegra30_blink_clk_init, + .enable = &tegra30_blink_clk_enable, + .disable = &tegra30_blink_clk_disable, + .set_rate = &tegra30_blink_clk_set_rate, +}; + +/* PLL Functions */ +static int tegra30_pll_clk_wait_for_lock(struct clk *c, u32 lock_reg, + u32 lock_bit) +{ +#if USE_PLL_LOCK_BITS + int i; + for (i = 0; i < c->u.pll.lock_delay; i++) { + if (clk_readl(lock_reg) & lock_bit) { + udelay(PLL_POST_LOCK_DELAY); + return 0; + } + udelay(2); /* timeout = 2 * lock time */ + } + pr_err("Timed out waiting for lock bit on pll %s", c->name); + return -1; +#endif + udelay(c->u.pll.lock_delay); + + return 0; +} + + +static void tegra30_utmi_param_configure(struct clk *c) +{ + u32 reg; + int i; + unsigned long main_rate = + clk_get_rate(c->parent->parent); + + for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { + if (main_rate == utmi_parameters[i].osc_frequency) + break; + } + + if (i >= ARRAY_SIZE(utmi_parameters)) { + pr_err("%s: Unexpected main rate %lu\n", __func__, main_rate); + return; + } + + reg = clk_readl(UTMIP_PLL_CFG2); + + /* Program UTMIP PLL stable and active counts */ + /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ + reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); + reg |= UTMIP_PLL_CFG2_STABLE_COUNT( + utmi_parameters[i].stable_count); + + reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); + + reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT( + utmi_parameters[i].active_delay_count); + + /* Remove power downs from UTMIP PLL control bits */ + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; + + clk_writel(reg, UTMIP_PLL_CFG2); + + /* Program UTMIP PLL delay and oscillator frequency counts */ + reg = clk_readl(UTMIP_PLL_CFG1); + reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); + + reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT( + utmi_parameters[i].enable_delay_count); + + reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); + reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT( + utmi_parameters[i].xtal_freq_count); + + /* Remove power downs from UTMIP PLL control bits */ + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; + + clk_writel(reg, UTMIP_PLL_CFG1); +} + +static void tegra30_pll_clk_init(struct clk *c) +{ + u32 val = clk_readl(c->reg + PLL_BASE); + + c->state = (val & PLL_BASE_ENABLE) ? ON : OFF; + + if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) { + const struct clk_pll_freq_table *sel; + unsigned long input_rate = clk_get_rate(c->parent); + for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { + if (sel->input_rate == input_rate && + sel->output_rate == c->u.pll.fixed_rate) { + c->mul = sel->n; + c->div = sel->m * sel->p; + return; + } + } + pr_err("Clock %s has unknown fixed frequency\n", c->name); + BUG(); + } else if (val & PLL_BASE_BYPASS) { + c->mul = 1; + c->div = 1; + } else { + c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT; + c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT; + if (c->flags & PLLU) + c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2; + else + c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >> + PLL_BASE_DIVP_SHIFT)); + if (c->flags & PLL_FIXED) { + unsigned long rate = clk_get_rate_locked(c); + BUG_ON(rate != c->u.pll.fixed_rate); + } + } + + if (c->flags & PLLU) + tegra30_utmi_param_configure(c); +} + +static int tegra30_pll_clk_enable(struct clk *c) +{ + u32 val; + pr_debug("%s on clock %s\n", __func__, c->name); + +#if USE_PLL_LOCK_BITS + val = clk_readl(c->reg + PLL_MISC(c)); + val |= PLL_MISC_LOCK_ENABLE(c); + clk_writel(val, c->reg + PLL_MISC(c)); +#endif + val = clk_readl(c->reg + PLL_BASE); + val &= ~PLL_BASE_BYPASS; + val |= PLL_BASE_ENABLE; + clk_writel(val, c->reg + PLL_BASE); + + if (c->flags & PLLM) { + val = pmc_readl(PMC_PLLP_WB0_OVERRIDE); + val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE; + pmc_writel(val, PMC_PLLP_WB0_OVERRIDE); + } + + tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_BASE, PLL_BASE_LOCK); + + return 0; +} + +static void tegra30_pll_clk_disable(struct clk *c) +{ + u32 val; + pr_debug("%s on clock %s\n", __func__, c->name); + + val = clk_readl(c->reg); + val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE); + clk_writel(val, c->reg); + + if (c->flags & PLLM) { + val = pmc_readl(PMC_PLLP_WB0_OVERRIDE); + val &= ~PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE; + pmc_writel(val, PMC_PLLP_WB0_OVERRIDE); + } +} + +static int tegra30_pll_clk_set_rate(struct clk *c, unsigned long rate) +{ + u32 val, p_div, old_base; + unsigned long input_rate; + const struct clk_pll_freq_table *sel; + struct clk_pll_freq_table cfg; + + pr_debug("%s: %s %lu\n", __func__, c->name, rate); + + if (c->flags & PLL_FIXED) { + int ret = 0; + if (rate != c->u.pll.fixed_rate) { + pr_err("%s: Can not change %s fixed rate %lu to %lu\n", + __func__, c->name, c->u.pll.fixed_rate, rate); + ret = -EINVAL; + } + return ret; + } + + if (c->flags & PLLM) { + if (rate != clk_get_rate_locked(c)) { + pr_err("%s: Can not change memory %s rate in flight\n", + __func__, c->name); + return -EINVAL; + } + return 0; + } + + p_div = 0; + input_rate = clk_get_rate(c->parent); + + /* Check if the target rate is tabulated */ + for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { + if (sel->input_rate == input_rate && sel->output_rate == rate) { + if (c->flags & PLLU) { + BUG_ON(sel->p < 1 || sel->p > 2); + if (sel->p == 1) + p_div = PLLU_BASE_POST_DIV; + } else { + BUG_ON(sel->p < 1); + for (val = sel->p; val > 1; val >>= 1) + p_div++; + p_div <<= PLL_BASE_DIVP_SHIFT; + } + break; + } + } + + /* Configure out-of-table rate */ + if (sel->input_rate == 0) { + unsigned long cfreq; + BUG_ON(c->flags & PLLU); + sel = &cfg; + + switch (input_rate) { + case 12000000: + case 26000000: + cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000; + break; + case 13000000: + cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000; + break; + case 16800000: + case 19200000: + cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000; + break; + default: + pr_err("%s: Unexpected reference rate %lu\n", + __func__, input_rate); + BUG(); + } + + /* Raise VCO to guarantee 0.5% accuracy */ + for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq; + cfg.output_rate <<= 1) + p_div++; + + cfg.p = 0x1 << p_div; + cfg.m = input_rate / cfreq; + cfg.n = cfg.output_rate / cfreq; + cfg.cpcon = OUT_OF_TABLE_CPCON; + + if ((cfg.m > (PLL_BASE_DIVM_MASK >> PLL_BASE_DIVM_SHIFT)) || + (cfg.n > (PLL_BASE_DIVN_MASK >> PLL_BASE_DIVN_SHIFT)) || + (p_div > (PLL_BASE_DIVP_MASK >> PLL_BASE_DIVP_SHIFT)) || + (cfg.output_rate > c->u.pll.vco_max)) { + pr_err("%s: Failed to set %s out-of-table rate %lu\n", + __func__, c->name, rate); + return -EINVAL; + } + p_div <<= PLL_BASE_DIVP_SHIFT; + } + + c->mul = sel->n; + c->div = sel->m * sel->p; + + old_base = val = clk_readl(c->reg + PLL_BASE); + val &= ~(PLL_BASE_DIVM_MASK | PLL_BASE_DIVN_MASK | + ((c->flags & PLLU) ? PLLU_BASE_POST_DIV : PLL_BASE_DIVP_MASK)); + val |= (sel->m << PLL_BASE_DIVM_SHIFT) | + (sel->n << PLL_BASE_DIVN_SHIFT) | p_div; + if (val == old_base) + return 0; + + if (c->state == ON) { + tegra30_pll_clk_disable(c); + val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE); + } + clk_writel(val, c->reg + PLL_BASE); + + if (c->flags & PLL_HAS_CPCON) { + val = clk_readl(c->reg + PLL_MISC(c)); + val &= ~PLL_MISC_CPCON_MASK; + val |= sel->cpcon << PLL_MISC_CPCON_SHIFT; + if (c->flags & (PLLU | PLLD)) { + val &= ~PLL_MISC_LFCON_MASK; + if (sel->n >= PLLDU_LFCON_SET_DIVN) + val |= 0x1 << PLL_MISC_LFCON_SHIFT; + } else if (c->flags & (PLLX | PLLM)) { + val &= ~(0x1 << PLL_MISC_DCCON_SHIFT); + if (rate >= (c->u.pll.vco_max >> 1)) + val |= 0x1 << PLL_MISC_DCCON_SHIFT; + } + clk_writel(val, c->reg + PLL_MISC(c)); + } + + if (c->state == ON) + tegra30_pll_clk_enable(c); + + return 0; +} + +static struct clk_ops tegra_pll_ops = { + .init = tegra30_pll_clk_init, + .enable = tegra30_pll_clk_enable, + .disable = tegra30_pll_clk_disable, + .set_rate = tegra30_pll_clk_set_rate, +}; + +static int +tegra30_plld_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting) +{ + u32 val, mask, reg; + + switch (p) { + case TEGRA_CLK_PLLD_CSI_OUT_ENB: + mask = PLLD_BASE_CSI_CLKENABLE; + reg = c->reg + PLL_BASE; + break; + case TEGRA_CLK_PLLD_DSI_OUT_ENB: + mask = PLLD_MISC_DSI_CLKENABLE; + reg = c->reg + PLL_MISC(c); + break; + case TEGRA_CLK_PLLD_MIPI_MUX_SEL: + if (!(c->flags & PLL_ALT_MISC_REG)) { + mask = PLLD_BASE_DSIB_MUX_MASK; + reg = c->reg + PLL_BASE; + break; + } + /* fall through - error since PLLD2 does not have MUX_SEL control */ + default: + return -EINVAL; + } + + val = clk_readl(reg); + if (setting) + val |= mask; + else + val &= ~mask; + clk_writel(val, reg); + return 0; +} + +static struct clk_ops tegra_plld_ops = { + .init = tegra30_pll_clk_init, + .enable = tegra30_pll_clk_enable, + .disable = tegra30_pll_clk_disable, + .set_rate = tegra30_pll_clk_set_rate, + .clk_cfg_ex = tegra30_plld_clk_cfg_ex, +}; + +static void tegra30_plle_clk_init(struct clk *c) +{ + u32 val; + + val = clk_readl(PLLE_AUX); + c->parent = (val & PLLE_AUX_PLLP_SEL) ? + tegra_get_clock_by_name("pll_p") : + tegra_get_clock_by_name("pll_ref"); + + val = clk_readl(c->reg + PLL_BASE); + c->state = (val & PLLE_BASE_ENABLE) ? ON : OFF; + c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT; + c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT; + c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT; +} + +static void tegra30_plle_clk_disable(struct clk *c) +{ + u32 val; + pr_debug("%s on clock %s\n", __func__, c->name); + + val = clk_readl(c->reg + PLL_BASE); + val &= ~(PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE); + clk_writel(val, c->reg + PLL_BASE); +} + +static void tegra30_plle_training(struct clk *c) +{ + u32 val; + + /* PLLE is already disabled, and setup cleared; + * create falling edge on PLLE IDDQ input */ + val = pmc_readl(PMC_SATA_PWRGT); + val |= PMC_SATA_PWRGT_PLLE_IDDQ_VALUE; + pmc_writel(val, PMC_SATA_PWRGT); + + val = pmc_readl(PMC_SATA_PWRGT); + val |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL; + pmc_writel(val, PMC_SATA_PWRGT); + + val = pmc_readl(PMC_SATA_PWRGT); + val &= ~PMC_SATA_PWRGT_PLLE_IDDQ_VALUE; + pmc_writel(val, PMC_SATA_PWRGT); + + do { + val = clk_readl(c->reg + PLL_MISC(c)); + } while (!(val & PLLE_MISC_READY)); +} + +static int tegra30_plle_configure(struct clk *c, bool force_training) +{ + u32 val; + const struct clk_pll_freq_table *sel; + unsigned long rate = c->u.pll.fixed_rate; + unsigned long input_rate = clk_get_rate(c->parent); + + for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { + if (sel->input_rate == input_rate && sel->output_rate == rate) + break; + } + + if (sel->input_rate == 0) + return -ENOSYS; + + /* disable PLLE, clear setup fiels */ + tegra30_plle_clk_disable(c); + + val = clk_readl(c->reg + PLL_MISC(c)); + val &= ~(PLLE_MISC_LOCK_ENABLE | PLLE_MISC_SETUP_MASK); + clk_writel(val, c->reg + PLL_MISC(c)); + + /* training */ + val = clk_readl(c->reg + PLL_MISC(c)); + if (force_training || (!(val & PLLE_MISC_READY))) + tegra30_plle_training(c); + + /* configure dividers, setup, disable SS */ + val = clk_readl(c->reg + PLL_BASE); + val &= ~PLLE_BASE_DIV_MASK; + val |= PLLE_BASE_DIV(sel->m, sel->n, sel->p, sel->cpcon); + clk_writel(val, c->reg + PLL_BASE); + c->mul = sel->n; + c->div = sel->m * sel->p; + + val = clk_readl(c->reg + PLL_MISC(c)); + val |= PLLE_MISC_SETUP_VALUE; + val |= PLLE_MISC_LOCK_ENABLE; + clk_writel(val, c->reg + PLL_MISC(c)); + + val = clk_readl(PLLE_SS_CTRL); + val |= PLLE_SS_DISABLE; + clk_writel(val, PLLE_SS_CTRL); + + /* enable and lock PLLE*/ + val = clk_readl(c->reg + PLL_BASE); + val |= (PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE); + clk_writel(val, c->reg + PLL_BASE); + + tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_MISC(c), PLLE_MISC_LOCK); + + return 0; +} + +static int tegra30_plle_clk_enable(struct clk *c) +{ + pr_debug("%s on clock %s\n", __func__, c->name); + return tegra30_plle_configure(c, !c->set); +} + +static struct clk_ops tegra_plle_ops = { + .init = tegra30_plle_clk_init, + .enable = tegra30_plle_clk_enable, + .disable = tegra30_plle_clk_disable, +}; + +/* Clock divider ops */ +static void tegra30_pll_div_clk_init(struct clk *c) +{ + if (c->flags & DIV_U71) { + u32 divu71; + u32 val = clk_readl(c->reg); + val >>= c->reg_shift; + c->state = (val & PLL_OUT_CLKEN) ? ON : OFF; + if (!(val & PLL_OUT_RESET_DISABLE)) + c->state = OFF; + + divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT; + c->div = (divu71 + 2); + c->mul = 2; + } else if (c->flags & DIV_2) { + c->state = ON; + if (c->flags & (PLLD | PLLX)) { + c->div = 2; + c->mul = 1; + } else + BUG(); + } else { + c->state = ON; + c->div = 1; + c->mul = 1; + } +} + +static int tegra30_pll_div_clk_enable(struct clk *c) +{ + u32 val; + u32 new_val; + + pr_debug("%s: %s\n", __func__, c->name); + if (c->flags & DIV_U71) { + val = clk_readl(c->reg); + new_val = val >> c->reg_shift; + new_val &= 0xFFFF; + + new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE; + + val &= ~(0xFFFF << c->reg_shift); + val |= new_val << c->reg_shift; + clk_writel_delay(val, c->reg); + return 0; + } else if (c->flags & DIV_2) { + return 0; + } + return -EINVAL; +} + +static void tegra30_pll_div_clk_disable(struct clk *c) +{ + u32 val; + u32 new_val; + + pr_debug("%s: %s\n", __func__, c->name); + if (c->flags & DIV_U71) { + val = clk_readl(c->reg); + new_val = val >> c->reg_shift; + new_val &= 0xFFFF; + + new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE); + + val &= ~(0xFFFF << c->reg_shift); + val |= new_val << c->reg_shift; + clk_writel_delay(val, c->reg); + } +} + +static int tegra30_pll_div_clk_set_rate(struct clk *c, unsigned long rate) +{ + u32 val; + u32 new_val; + int divider_u71; + unsigned long parent_rate = clk_get_rate(c->parent); + + pr_debug("%s: %s %lu\n", __func__, c->name, rate); + if (c->flags & DIV_U71) { + divider_u71 = clk_div71_get_divider( + parent_rate, rate, c->flags, ROUND_DIVIDER_UP); + if (divider_u71 >= 0) { + val = clk_readl(c->reg); + new_val = val >> c->reg_shift; + new_val &= 0xFFFF; + if (c->flags & DIV_U71_FIXED) + new_val |= PLL_OUT_OVERRIDE; + new_val &= ~PLL_OUT_RATIO_MASK; + new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT; + + val &= ~(0xFFFF << c->reg_shift); + val |= new_val << c->reg_shift; + clk_writel_delay(val, c->reg); + c->div = divider_u71 + 2; + c->mul = 2; + return 0; + } + } else if (c->flags & DIV_2) + return clk_set_rate(c->parent, rate * 2); + + return -EINVAL; +} + +static long tegra30_pll_div_clk_round_rate(struct clk *c, unsigned long rate) +{ + int divider; + unsigned long parent_rate = clk_get_rate(c->parent); + pr_debug("%s: %s %lu\n", __func__, c->name, rate); + + if (c->flags & DIV_U71) { + divider = clk_div71_get_divider( + parent_rate, rate, c->flags, ROUND_DIVIDER_UP); + if (divider < 0) + return divider; + return DIV_ROUND_UP(parent_rate * 2, divider + 2); + } else if (c->flags & DIV_2) + /* no rounding - fixed DIV_2 dividers pass rate to parent PLL */ + return rate; + + return -EINVAL; +} + +static struct clk_ops tegra_pll_div_ops = { + .init = tegra30_pll_div_clk_init, + .enable = tegra30_pll_div_clk_enable, + .disable = tegra30_pll_div_clk_disable, + .set_rate = tegra30_pll_div_clk_set_rate, + .round_rate = tegra30_pll_div_clk_round_rate, +}; + +/* Periph clk ops */ +static inline u32 periph_clk_source_mask(struct clk *c) +{ + if (c->flags & MUX8) + return 7 << 29; + else if (c->flags & MUX_PWM) + return 3 << 28; + else if (c->flags & MUX_CLK_OUT) + return 3 << (c->u.periph.clk_num + 4); + else if (c->flags & PLLD) + return PLLD_BASE_DSIB_MUX_MASK; + else + return 3 << 30; +} + +static inline u32 periph_clk_source_shift(struct clk *c) +{ + if (c->flags & MUX8) + return 29; + else if (c->flags & MUX_PWM) + return 28; + else if (c->flags & MUX_CLK_OUT) + return c->u.periph.clk_num + 4; + else if (c->flags & PLLD) + return PLLD_BASE_DSIB_MUX_SHIFT; + else + return 30; +} + +static void tegra30_periph_clk_init(struct clk *c) +{ + u32 val = clk_readl(c->reg); + const struct clk_mux_sel *mux = 0; + const struct clk_mux_sel *sel; + if (c->flags & MUX) { + for (sel = c->inputs; sel->input != NULL; sel++) { + if (((val & periph_clk_source_mask(c)) >> + periph_clk_source_shift(c)) == sel->value) + mux = sel; + } + BUG_ON(!mux); + + c->parent = mux->input; + } else { + c->parent = c->inputs[0].input; + } + + if (c->flags & DIV_U71) { + u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK; + if ((c->flags & DIV_U71_UART) && + (!(val & PERIPH_CLK_UART_DIV_ENB))) { + divu71 = 0; + } + if (c->flags & DIV_U71_IDLE) { + val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK << + PERIPH_CLK_SOURCE_DIVIDLE_SHIFT); + val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL << + PERIPH_CLK_SOURCE_DIVIDLE_SHIFT); + clk_writel(val, c->reg); + } + c->div = divu71 + 2; + c->mul = 2; + } else if (c->flags & DIV_U16) { + u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK; + c->div = divu16 + 1; + c->mul = 1; + } else { + c->div = 1; + c->mul = 1; + } + + c->state = ON; + if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c))) + c->state = OFF; + if (!(c->flags & PERIPH_NO_RESET)) + if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & PERIPH_CLK_TO_BIT(c)) + c->state = OFF; +} + +static int tegra30_periph_clk_enable(struct clk *c) +{ + pr_debug("%s on clock %s\n", __func__, c->name); + + tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++; + if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1) + return 0; + + clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_SET_REG(c)); + if (!(c->flags & PERIPH_NO_RESET) && + !(c->flags & PERIPH_MANUAL_RESET)) { + if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & + PERIPH_CLK_TO_BIT(c)) { + udelay(5); /* reset propagation delay */ + clk_writel(PERIPH_CLK_TO_BIT(c), + PERIPH_CLK_TO_RST_CLR_REG(c)); + } + } + return 0; +} + +static void tegra30_periph_clk_disable(struct clk *c) +{ + unsigned long val; + pr_debug("%s on clock %s\n", __func__, c->name); + + if (c->refcnt) + tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--; + + if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0) { + /* If peripheral is in the APB bus then read the APB bus to + * flush the write operation in apb bus. This will avoid the + * peripheral access after disabling clock*/ + if (c->flags & PERIPH_ON_APB) + val = chipid_readl(); + + clk_writel_delay( + PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c)); + } +} + +static void tegra30_periph_clk_reset(struct clk *c, bool assert) +{ + unsigned long val; + pr_debug("%s %s on clock %s\n", __func__, + assert ? "assert" : "deassert", c->name); + + if (!(c->flags & PERIPH_NO_RESET)) { + if (assert) { + /* If peripheral is in the APB bus then read the APB + * bus to flush the write operation in apb bus. This + * will avoid the peripheral access after disabling + * clock */ + if (c->flags & PERIPH_ON_APB) + val = chipid_readl(); + + clk_writel(PERIPH_CLK_TO_BIT(c), + PERIPH_CLK_TO_RST_SET_REG(c)); + } else + clk_writel(PERIPH_CLK_TO_BIT(c), + PERIPH_CLK_TO_RST_CLR_REG(c)); + } +} + +static int tegra30_periph_clk_set_parent(struct clk *c, struct clk *p) +{ + u32 val; + const struct clk_mux_sel *sel; + pr_debug("%s: %s %s\n", __func__, c->name, p->name); + + if (!(c->flags & MUX)) + return (p == c->parent) ? 0 : (-EINVAL); + + for (sel = c->inputs; sel->input != NULL; sel++) { + if (sel->input == p) { + val = clk_readl(c->reg); + val &= ~periph_clk_source_mask(c); + val |= (sel->value << periph_clk_source_shift(c)); + + if (c->refcnt) + clk_enable(p); + + clk_writel_delay(val, c->reg); + + if (c->refcnt && c->parent) + clk_disable(c->parent); + + clk_reparent(c, p); + return 0; + } + } + + return -EINVAL; +} + +static int tegra30_periph_clk_set_rate(struct clk *c, unsigned long rate) +{ + u32 val; + int divider; + unsigned long parent_rate = clk_get_rate(c->parent); + + if (c->flags & DIV_U71) { + divider = clk_div71_get_divider( + parent_rate, rate, c->flags, ROUND_DIVIDER_UP); + if (divider >= 0) { + val = clk_readl(c->reg); + val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK; + val |= divider; + if (c->flags & DIV_U71_UART) { + if (divider) + val |= PERIPH_CLK_UART_DIV_ENB; + else + val &= ~PERIPH_CLK_UART_DIV_ENB; + } + clk_writel_delay(val, c->reg); + c->div = divider + 2; + c->mul = 2; + return 0; + } + } else if (c->flags & DIV_U16) { + divider = clk_div16_get_divider(parent_rate, rate); + if (divider >= 0) { + val = clk_readl(c->reg); + val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK; + val |= divider; + clk_writel_delay(val, c->reg); + c->div = divider + 1; + c->mul = 1; + return 0; + } + } else if (parent_rate <= rate) { + c->div = 1; + c->mul = 1; + return 0; + } + return -EINVAL; +} + +static long tegra30_periph_clk_round_rate(struct clk *c, + unsigned long rate) +{ + int divider; + unsigned long parent_rate = clk_get_rate(c->parent); + pr_debug("%s: %s %lu\n", __func__, c->name, rate); + + if (c->flags & DIV_U71) { + divider = clk_div71_get_divider( + parent_rate, rate, c->flags, ROUND_DIVIDER_UP); + if (divider < 0) + return divider; + + return DIV_ROUND_UP(parent_rate * 2, divider + 2); + } else if (c->flags & DIV_U16) { + divider = clk_div16_get_divider(parent_rate, rate); + if (divider < 0) + return divider; + return DIV_ROUND_UP(parent_rate, divider + 1); + } + return -EINVAL; +} + +static struct clk_ops tegra_periph_clk_ops = { + .init = &tegra30_periph_clk_init, + .enable = &tegra30_periph_clk_enable, + .disable = &tegra30_periph_clk_disable, + .set_parent = &tegra30_periph_clk_set_parent, + .set_rate = &tegra30_periph_clk_set_rate, + .round_rate = &tegra30_periph_clk_round_rate, + .reset = &tegra30_periph_clk_reset, +}; + + +/* Periph extended clock configuration ops */ +static int +tegra30_vi_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting) +{ + if (p == TEGRA_CLK_VI_INP_SEL) { + u32 val = clk_readl(c->reg); + val &= ~PERIPH_CLK_VI_SEL_EX_MASK; + val |= (setting << PERIPH_CLK_VI_SEL_EX_SHIFT) & + PERIPH_CLK_VI_SEL_EX_MASK; + clk_writel(val, c->reg); + return 0; + } + return -EINVAL; +} + +static struct clk_ops tegra_vi_clk_ops = { + .init = &tegra30_periph_clk_init, + .enable = &tegra30_periph_clk_enable, + .disable = &tegra30_periph_clk_disable, + .set_parent = &tegra30_periph_clk_set_parent, + .set_rate = &tegra30_periph_clk_set_rate, + .round_rate = &tegra30_periph_clk_round_rate, + .clk_cfg_ex = &tegra30_vi_clk_cfg_ex, + .reset = &tegra30_periph_clk_reset, +}; + +static int +tegra30_nand_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting) +{ + if (p == TEGRA_CLK_NAND_PAD_DIV2_ENB) { + u32 val = clk_readl(c->reg); + if (setting) + val |= PERIPH_CLK_NAND_DIV_EX_ENB; + else + val &= ~PERIPH_CLK_NAND_DIV_EX_ENB; + clk_writel(val, c->reg); + return 0; + } + return -EINVAL; +} + +static struct clk_ops tegra_nand_clk_ops = { + .init = &tegra30_periph_clk_init, + .enable = &tegra30_periph_clk_enable, + .disable = &tegra30_periph_clk_disable, + .set_parent = &tegra30_periph_clk_set_parent, + .set_rate = &tegra30_periph_clk_set_rate, + .round_rate = &tegra30_periph_clk_round_rate, + .clk_cfg_ex = &tegra30_nand_clk_cfg_ex, + .reset = &tegra30_periph_clk_reset, +}; + + +static int +tegra30_dtv_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting) +{ + if (p == TEGRA_CLK_DTV_INVERT) { + u32 val = clk_readl(c->reg); + if (setting) + val |= PERIPH_CLK_DTV_POLARITY_INV; + else + val &= ~PERIPH_CLK_DTV_POLARITY_INV; + clk_writel(val, c->reg); + return 0; + } + return -EINVAL; +} + +static struct clk_ops tegra_dtv_clk_ops = { + .init = &tegra30_periph_clk_init, + .enable = &tegra30_periph_clk_enable, + .disable = &tegra30_periph_clk_disable, + .set_parent = &tegra30_periph_clk_set_parent, + .set_rate = &tegra30_periph_clk_set_rate, + .round_rate = &tegra30_periph_clk_round_rate, + .clk_cfg_ex = &tegra30_dtv_clk_cfg_ex, + .reset = &tegra30_periph_clk_reset, +}; + +static int tegra30_dsib_clk_set_parent(struct clk *c, struct clk *p) +{ + const struct clk_mux_sel *sel; + struct clk *d = tegra_get_clock_by_name("pll_d"); + + pr_debug("%s: %s %s\n", __func__, c->name, p->name); + + for (sel = c->inputs; sel->input != NULL; sel++) { + if (sel->input == p) { + if (c->refcnt) + clk_enable(p); + + /* The DSIB parent selection bit is in PLLD base + register - can not do direct r-m-w, must be + protected by PLLD lock */ + tegra_clk_cfg_ex( + d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, sel->value); + + if (c->refcnt && c->parent) + clk_disable(c->parent); + + clk_reparent(c, p); + return 0; + } + } + + return -EINVAL; +} + +static struct clk_ops tegra_dsib_clk_ops = { + .init = &tegra30_periph_clk_init, + .enable = &tegra30_periph_clk_enable, + .disable = &tegra30_periph_clk_disable, + .set_parent = &tegra30_dsib_clk_set_parent, + .set_rate = &tegra30_periph_clk_set_rate, + .round_rate = &tegra30_periph_clk_round_rate, + .reset = &tegra30_periph_clk_reset, +}; + +/* pciex clock support only reset function */ +static struct clk_ops tegra_pciex_clk_ops = { + .reset = tegra30_periph_clk_reset, +}; + +/* Output clock ops */ + +static DEFINE_SPINLOCK(clk_out_lock); + +static void tegra30_clk_out_init(struct clk *c) +{ + const struct clk_mux_sel *mux = 0; + const struct clk_mux_sel *sel; + u32 val = pmc_readl(c->reg); + + c->state = (val & (0x1 << c->u.periph.clk_num)) ? ON : OFF; + c->mul = 1; + c->div = 1; + + for (sel = c->inputs; sel->input != NULL; sel++) { + if (((val & periph_clk_source_mask(c)) >> + periph_clk_source_shift(c)) == sel->value) + mux = sel; + } + BUG_ON(!mux); + c->parent = mux->input; +} + +static int tegra30_clk_out_enable(struct clk *c) +{ + u32 val; + unsigned long flags; + + pr_debug("%s on clock %s\n", __func__, c->name); + + spin_lock_irqsave(&clk_out_lock, flags); + val = pmc_readl(c->reg); + val |= (0x1 << c->u.periph.clk_num); + pmc_writel(val, c->reg); + spin_unlock_irqrestore(&clk_out_lock, flags); + + return 0; +} + +static void tegra30_clk_out_disable(struct clk *c) +{ + u32 val; + unsigned long flags; + + pr_debug("%s on clock %s\n", __func__, c->name); + + spin_lock_irqsave(&clk_out_lock, flags); + val = pmc_readl(c->reg); + val &= ~(0x1 << c->u.periph.clk_num); + pmc_writel(val, c->reg); + spin_unlock_irqrestore(&clk_out_lock, flags); +} + +static int tegra30_clk_out_set_parent(struct clk *c, struct clk *p) +{ + u32 val; + unsigned long flags; + const struct clk_mux_sel *sel; + + pr_debug("%s: %s %s\n", __func__, c->name, p->name); + + for (sel = c->inputs; sel->input != NULL; sel++) { + if (sel->input == p) { + if (c->refcnt) + clk_enable(p); + + spin_lock_irqsave(&clk_out_lock, flags); + val = pmc_readl(c->reg); + val &= ~periph_clk_source_mask(c); + val |= (sel->value << periph_clk_source_shift(c)); + pmc_writel(val, c->reg); + spin_unlock_irqrestore(&clk_out_lock, flags); + + if (c->refcnt && c->parent) + clk_disable(c->parent); + + clk_reparent(c, p); + return 0; + } + } + return -EINVAL; +} + +static struct clk_ops tegra_clk_out_ops = { + .init = &tegra30_clk_out_init, + .enable = &tegra30_clk_out_enable, + .disable = &tegra30_clk_out_disable, + .set_parent = &tegra30_clk_out_set_parent, +}; + + +/* Clock doubler ops */ +static void tegra30_clk_double_init(struct clk *c) +{ + u32 val = clk_readl(c->reg); + c->mul = val & (0x1 << c->reg_shift) ? 1 : 2; + c->div = 1; + c->state = ON; + if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c))) + c->state = OFF; +}; + +static int tegra30_clk_double_set_rate(struct clk *c, unsigned long rate) +{ + u32 val; + unsigned long parent_rate = clk_get_rate(c->parent); + if (rate == parent_rate) { + val = clk_readl(c->reg) | (0x1 << c->reg_shift); + clk_writel(val, c->reg); + c->mul = 1; + c->div = 1; + return 0; + } else if (rate == 2 * parent_rate) { + val = clk_readl(c->reg) & (~(0x1 << c->reg_shift)); + clk_writel(val, c->reg); + c->mul = 2; + c->div = 1; + return 0; + } + return -EINVAL; +} + +static struct clk_ops tegra_clk_double_ops = { + .init = &tegra30_clk_double_init, + .enable = &tegra30_periph_clk_enable, + .disable = &tegra30_periph_clk_disable, + .set_rate = &tegra30_clk_double_set_rate, +}; + +/* Audio sync clock ops */ +static int tegra30_sync_source_set_rate(struct clk *c, unsigned long rate) +{ + c->rate = rate; + return 0; +} + +static struct clk_ops tegra_sync_source_ops = { + .set_rate = &tegra30_sync_source_set_rate, +}; + +static void tegra30_audio_sync_clk_init(struct clk *c) +{ + int source; + const struct clk_mux_sel *sel; + u32 val = clk_readl(c->reg); + c->state = (val & AUDIO_SYNC_DISABLE_BIT) ? OFF : ON; + source = val & AUDIO_SYNC_SOURCE_MASK; + for (sel = c->inputs; sel->input != NULL; sel++) + if (sel->value == source) + break; + BUG_ON(sel->input == NULL); + c->parent = sel->input; +} + +static int tegra30_audio_sync_clk_enable(struct clk *c) +{ + u32 val = clk_readl(c->reg); + clk_writel((val & (~AUDIO_SYNC_DISABLE_BIT)), c->reg); + return 0; +} + +static void tegra30_audio_sync_clk_disable(struct clk *c) +{ + u32 val = clk_readl(c->reg); + clk_writel((val | AUDIO_SYNC_DISABLE_BIT), c->reg); +} + +static int tegra30_audio_sync_clk_set_parent(struct clk *c, struct clk *p) +{ + u32 val; + const struct clk_mux_sel *sel; + for (sel = c->inputs; sel->input != NULL; sel++) { + if (sel->input == p) { + val = clk_readl(c->reg); + val &= ~AUDIO_SYNC_SOURCE_MASK; + val |= sel->value; + + if (c->refcnt) + clk_enable(p); + + clk_writel(val, c->reg); + + if (c->refcnt && c->parent) + clk_disable(c->parent); + + clk_reparent(c, p); + return 0; + } + } + + return -EINVAL; +} + +static struct clk_ops tegra_audio_sync_clk_ops = { + .init = tegra30_audio_sync_clk_init, + .enable = tegra30_audio_sync_clk_enable, + .disable = tegra30_audio_sync_clk_disable, + .set_parent = tegra30_audio_sync_clk_set_parent, +}; + +/* cml0 (pcie), and cml1 (sata) clock ops */ +static void tegra30_cml_clk_init(struct clk *c) +{ + u32 val = clk_readl(c->reg); + c->state = val & (0x1 << c->u.periph.clk_num) ? ON : OFF; +} + +static int tegra30_cml_clk_enable(struct clk *c) +{ + u32 val = clk_readl(c->reg); + val |= (0x1 << c->u.periph.clk_num); + clk_writel(val, c->reg); + return 0; +} + +static void tegra30_cml_clk_disable(struct clk *c) +{ + u32 val = clk_readl(c->reg); + val &= ~(0x1 << c->u.periph.clk_num); + clk_writel(val, c->reg); +} + +static struct clk_ops tegra_cml_clk_ops = { + .init = &tegra30_cml_clk_init, + .enable = &tegra30_cml_clk_enable, + .disable = &tegra30_cml_clk_disable, +}; + +/* Clock definitions */ +static struct clk tegra_clk_32k = { + .name = "clk_32k", + .rate = 32768, + .ops = NULL, + .max_rate = 32768, +}; + +static struct clk tegra_clk_m = { + .name = "clk_m", + .flags = ENABLE_ON_INIT, + .ops = &tegra_clk_m_ops, + .reg = 0x1fc, + .reg_shift = 28, + .max_rate = 48000000, +}; + +static struct clk tegra_clk_m_div2 = { + .name = "clk_m_div2", + .ops = &tegra_clk_m_div_ops, + .parent = &tegra_clk_m, + .mul = 1, + .div = 2, + .state = ON, + .max_rate = 24000000, +}; + +static struct clk tegra_clk_m_div4 = { + .name = "clk_m_div4", + .ops = &tegra_clk_m_div_ops, + .parent = &tegra_clk_m, + .mul = 1, + .div = 4, + .state = ON, + .max_rate = 12000000, +}; + +static struct clk tegra_pll_ref = { + .name = "pll_ref", + .flags = ENABLE_ON_INIT, + .ops = &tegra_pll_ref_ops, + .parent = &tegra_clk_m, + .max_rate = 26000000, +}; + +static struct clk_pll_freq_table tegra_pll_c_freq_table[] = { + { 12000000, 1040000000, 520, 6, 1, 8}, + { 13000000, 1040000000, 480, 6, 1, 8}, + { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */ + { 19200000, 1040000000, 325, 6, 1, 6}, + { 26000000, 1040000000, 520, 13, 1, 8}, + + { 12000000, 832000000, 416, 6, 1, 8}, + { 13000000, 832000000, 832, 13, 1, 8}, + { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */ + { 19200000, 832000000, 260, 6, 1, 8}, + { 26000000, 832000000, 416, 13, 1, 8}, + + { 12000000, 624000000, 624, 12, 1, 8}, + { 13000000, 624000000, 624, 13, 1, 8}, + { 16800000, 600000000, 520, 14, 1, 8}, + { 19200000, 624000000, 520, 16, 1, 8}, + { 26000000, 624000000, 624, 26, 1, 8}, + + { 12000000, 600000000, 600, 12, 1, 8}, + { 13000000, 600000000, 600, 13, 1, 8}, + { 16800000, 600000000, 500, 14, 1, 8}, + { 19200000, 600000000, 375, 12, 1, 6}, + { 26000000, 600000000, 600, 26, 1, 8}, + + { 12000000, 520000000, 520, 12, 1, 8}, + { 13000000, 520000000, 520, 13, 1, 8}, + { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */ + { 19200000, 520000000, 325, 12, 1, 6}, + { 26000000, 520000000, 520, 26, 1, 8}, + + { 12000000, 416000000, 416, 12, 1, 8}, + { 13000000, 416000000, 416, 13, 1, 8}, + { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */ + { 19200000, 416000000, 260, 12, 1, 6}, + { 26000000, 416000000, 416, 26, 1, 8}, + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct clk tegra_pll_c = { + .name = "pll_c", + .flags = PLL_HAS_CPCON, + .ops = &tegra_pll_ops, + .reg = 0x80, + .parent = &tegra_pll_ref, + .max_rate = 1400000000, + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1400000000, + .freq_table = tegra_pll_c_freq_table, + .lock_delay = 300, + }, +}; + +static struct clk tegra_pll_c_out1 = { + .name = "pll_c_out1", + .ops = &tegra_pll_div_ops, + .flags = DIV_U71, + .parent = &tegra_pll_c, + .reg = 0x84, + .reg_shift = 0, + .max_rate = 700000000, +}; + +static struct clk_pll_freq_table tegra_pll_m_freq_table[] = { + { 12000000, 666000000, 666, 12, 1, 8}, + { 13000000, 666000000, 666, 13, 1, 8}, + { 16800000, 666000000, 555, 14, 1, 8}, + { 19200000, 666000000, 555, 16, 1, 8}, + { 26000000, 666000000, 666, 26, 1, 8}, + { 12000000, 600000000, 600, 12, 1, 8}, + { 13000000, 600000000, 600, 13, 1, 8}, + { 16800000, 600000000, 500, 14, 1, 8}, + { 19200000, 600000000, 375, 12, 1, 6}, + { 26000000, 600000000, 600, 26, 1, 8}, + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct clk tegra_pll_m = { + .name = "pll_m", + .flags = PLL_HAS_CPCON | PLLM, + .ops = &tegra_pll_ops, + .reg = 0x90, + .parent = &tegra_pll_ref, + .max_rate = 800000000, + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1200000000, + .freq_table = tegra_pll_m_freq_table, + .lock_delay = 300, + }, +}; + +static struct clk tegra_pll_m_out1 = { + .name = "pll_m_out1", + .ops = &tegra_pll_div_ops, + .flags = DIV_U71, + .parent = &tegra_pll_m, + .reg = 0x94, + .reg_shift = 0, + .max_rate = 600000000, +}; + +static struct clk_pll_freq_table tegra_pll_p_freq_table[] = { + { 12000000, 216000000, 432, 12, 2, 8}, + { 13000000, 216000000, 432, 13, 2, 8}, + { 16800000, 216000000, 360, 14, 2, 8}, + { 19200000, 216000000, 360, 16, 2, 8}, + { 26000000, 216000000, 432, 26, 2, 8}, + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct clk tegra_pll_p = { + .name = "pll_p", + .flags = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON, + .ops = &tegra_pll_ops, + .reg = 0xa0, + .parent = &tegra_pll_ref, + .max_rate = 432000000, + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1400000000, + .freq_table = tegra_pll_p_freq_table, + .lock_delay = 300, + .fixed_rate = 408000000, + }, +}; + +static struct clk tegra_pll_p_out1 = { + .name = "pll_p_out1", + .ops = &tegra_pll_div_ops, + .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, + .parent = &tegra_pll_p, + .reg = 0xa4, + .reg_shift = 0, + .max_rate = 432000000, +}; + +static struct clk tegra_pll_p_out2 = { + .name = "pll_p_out2", + .ops = &tegra_pll_div_ops, + .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, + .parent = &tegra_pll_p, + .reg = 0xa4, + .reg_shift = 16, + .max_rate = 432000000, +}; + +static struct clk tegra_pll_p_out3 = { + .name = "pll_p_out3", + .ops = &tegra_pll_div_ops, + .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, + .parent = &tegra_pll_p, + .reg = 0xa8, + .reg_shift = 0, + .max_rate = 432000000, +}; + +static struct clk tegra_pll_p_out4 = { + .name = "pll_p_out4", + .ops = &tegra_pll_div_ops, + .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, + .parent = &tegra_pll_p, + .reg = 0xa8, + .reg_shift = 16, + .max_rate = 432000000, +}; + +static struct clk_pll_freq_table tegra_pll_a_freq_table[] = { + { 9600000, 564480000, 294, 5, 1, 4}, + { 9600000, 552960000, 288, 5, 1, 4}, + { 9600000, 24000000, 5, 2, 1, 1}, + + { 28800000, 56448000, 49, 25, 1, 1}, + { 28800000, 73728000, 64, 25, 1, 1}, + { 28800000, 24000000, 5, 6, 1, 1}, + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct clk tegra_pll_a = { + .name = "pll_a", + .flags = PLL_HAS_CPCON, + .ops = &tegra_pll_ops, + .reg = 0xb0, + .parent = &tegra_pll_p_out1, + .max_rate = 700000000, + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1400000000, + .freq_table = tegra_pll_a_freq_table, + .lock_delay = 300, + }, +}; + +static struct clk tegra_pll_a_out0 = { + .name = "pll_a_out0", + .ops = &tegra_pll_div_ops, + .flags = DIV_U71, + .parent = &tegra_pll_a, + .reg = 0xb4, + .reg_shift = 0, + .max_rate = 100000000, +}; + +static struct clk_pll_freq_table tegra_pll_d_freq_table[] = { + { 12000000, 216000000, 216, 12, 1, 4}, + { 13000000, 216000000, 216, 13, 1, 4}, + { 16800000, 216000000, 180, 14, 1, 4}, + { 19200000, 216000000, 180, 16, 1, 4}, + { 26000000, 216000000, 216, 26, 1, 4}, + + { 12000000, 594000000, 594, 12, 1, 8}, + { 13000000, 594000000, 594, 13, 1, 8}, + { 16800000, 594000000, 495, 14, 1, 8}, + { 19200000, 594000000, 495, 16, 1, 8}, + { 26000000, 594000000, 594, 26, 1, 8}, + + { 12000000, 1000000000, 1000, 12, 1, 12}, + { 13000000, 1000000000, 1000, 13, 1, 12}, + { 19200000, 1000000000, 625, 12, 1, 8}, + { 26000000, 1000000000, 1000, 26, 1, 12}, + + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct clk tegra_pll_d = { + .name = "pll_d", + .flags = PLL_HAS_CPCON | PLLD, + .ops = &tegra_plld_ops, + .reg = 0xd0, + .parent = &tegra_pll_ref, + .max_rate = 1000000000, + .u.pll = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 40000000, + .vco_max = 1000000000, + .freq_table = tegra_pll_d_freq_table, + .lock_delay = 1000, + }, +}; + +static struct clk tegra_pll_d_out0 = { + .name = "pll_d_out0", + .ops = &tegra_pll_div_ops, + .flags = DIV_2 | PLLD, + .parent = &tegra_pll_d, + .max_rate = 500000000, +}; + +static struct clk tegra_pll_d2 = { + .name = "pll_d2", + .flags = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLD, + .ops = &tegra_plld_ops, + .reg = 0x4b8, + .parent = &tegra_pll_ref, + .max_rate = 1000000000, + .u.pll = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 40000000, + .vco_max = 1000000000, + .freq_table = tegra_pll_d_freq_table, + .lock_delay = 1000, + }, +}; + +static struct clk tegra_pll_d2_out0 = { + .name = "pll_d2_out0", + .ops = &tegra_pll_div_ops, + .flags = DIV_2 | PLLD, + .parent = &tegra_pll_d2, + .max_rate = 500000000, +}; + +static struct clk_pll_freq_table tegra_pll_u_freq_table[] = { + { 12000000, 480000000, 960, 12, 2, 12}, + { 13000000, 480000000, 960, 13, 2, 12}, + { 16800000, 480000000, 400, 7, 2, 5}, + { 19200000, 480000000, 200, 4, 2, 3}, + { 26000000, 480000000, 960, 26, 2, 12}, + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct clk tegra_pll_u = { + .name = "pll_u", + .flags = PLL_HAS_CPCON | PLLU, + .ops = &tegra_pll_ops, + .reg = 0xc0, + .parent = &tegra_pll_ref, + .max_rate = 480000000, + .u.pll = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 480000000, + .vco_max = 960000000, + .freq_table = tegra_pll_u_freq_table, + .lock_delay = 1000, + }, +}; + +static struct clk_pll_freq_table tegra_pll_x_freq_table[] = { + /* 1.7 GHz */ + { 12000000, 1700000000, 850, 6, 1, 8}, + { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */ + { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */ + { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */ + { 26000000, 1700000000, 850, 13, 1, 8}, + + /* 1.6 GHz */ + { 12000000, 1600000000, 800, 6, 1, 8}, + { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */ + { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */ + { 19200000, 1600000000, 500, 6, 1, 8}, + { 26000000, 1600000000, 800, 13, 1, 8}, + + /* 1.5 GHz */ + { 12000000, 1500000000, 750, 6, 1, 8}, + { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */ + { 16800000, 1500000000, 625, 7, 1, 8}, + { 19200000, 1500000000, 625, 8, 1, 8}, + { 26000000, 1500000000, 750, 13, 1, 8}, + + /* 1.4 GHz */ + { 12000000, 1400000000, 700, 6, 1, 8}, + { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */ + { 16800000, 1400000000, 1000, 12, 1, 8}, + { 19200000, 1400000000, 875, 12, 1, 8}, + { 26000000, 1400000000, 700, 13, 1, 8}, + + /* 1.3 GHz */ + { 12000000, 1300000000, 975, 9, 1, 8}, + { 13000000, 1300000000, 1000, 10, 1, 8}, + { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */ + { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */ + { 26000000, 1300000000, 650, 13, 1, 8}, + + /* 1.2 GHz */ + { 12000000, 1200000000, 1000, 10, 1, 8}, + { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */ + { 16800000, 1200000000, 1000, 14, 1, 8}, + { 19200000, 1200000000, 1000, 16, 1, 8}, + { 26000000, 1200000000, 600, 13, 1, 8}, + + /* 1.1 GHz */ + { 12000000, 1100000000, 825, 9, 1, 8}, + { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */ + { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */ + { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */ + { 26000000, 1100000000, 550, 13, 1, 8}, + + /* 1 GHz */ + { 12000000, 1000000000, 1000, 12, 1, 8}, + { 13000000, 1000000000, 1000, 13, 1, 8}, + { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */ + { 19200000, 1000000000, 625, 12, 1, 8}, + { 26000000, 1000000000, 1000, 26, 1, 8}, + + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct clk tegra_pll_x = { + .name = "pll_x", + .flags = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLX, + .ops = &tegra_pll_ops, + .reg = 0xe0, + .parent = &tegra_pll_ref, + .max_rate = 1700000000, + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1700000000, + .freq_table = tegra_pll_x_freq_table, + .lock_delay = 300, + }, +}; + +static struct clk tegra_pll_x_out0 = { + .name = "pll_x_out0", + .ops = &tegra_pll_div_ops, + .flags = DIV_2 | PLLX, + .parent = &tegra_pll_x, + .max_rate = 850000000, +}; + + +static struct clk_pll_freq_table tegra_pll_e_freq_table[] = { + /* PLLE special case: use cpcon field to store cml divider value */ + { 12000000, 100000000, 150, 1, 18, 11}, + { 216000000, 100000000, 200, 18, 24, 13}, + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct clk tegra_pll_e = { + .name = "pll_e", + .flags = PLL_ALT_MISC_REG, + .ops = &tegra_plle_ops, + .reg = 0xe8, + .max_rate = 100000000, + .u.pll = { + .input_min = 12000000, + .input_max = 216000000, + .cf_min = 12000000, + .cf_max = 12000000, + .vco_min = 1200000000, + .vco_max = 2400000000U, + .freq_table = tegra_pll_e_freq_table, + .lock_delay = 300, + .fixed_rate = 100000000, + }, +}; + +static struct clk tegra_cml0_clk = { + .name = "cml0", + .parent = &tegra_pll_e, + .ops = &tegra_cml_clk_ops, + .reg = PLLE_AUX, + .max_rate = 100000000, + .u.periph = { + .clk_num = 0, + }, +}; + +static struct clk tegra_cml1_clk = { + .name = "cml1", + .parent = &tegra_pll_e, + .ops = &tegra_cml_clk_ops, + .reg = PLLE_AUX, + .max_rate = 100000000, + .u.periph = { + .clk_num = 1, + }, +}; + +static struct clk tegra_pciex_clk = { + .name = "pciex", + .parent = &tegra_pll_e, + .ops = &tegra_pciex_clk_ops, + .max_rate = 100000000, + .u.periph = { + .clk_num = 74, + }, +}; + +/* Audio sync clocks */ +#define SYNC_SOURCE(_id) \ + { \ + .name = #_id "_sync", \ + .rate = 24000000, \ + .max_rate = 24000000, \ + .ops = &tegra_sync_source_ops \ + } +static struct clk tegra_sync_source_list[] = { + SYNC_SOURCE(spdif_in), + SYNC_SOURCE(i2s0), + SYNC_SOURCE(i2s1), + SYNC_SOURCE(i2s2), + SYNC_SOURCE(i2s3), + SYNC_SOURCE(i2s4), + SYNC_SOURCE(vimclk), +}; + +static struct clk_mux_sel mux_audio_sync_clk[] = { + { .input = &tegra_sync_source_list[0], .value = 0}, + { .input = &tegra_sync_source_list[1], .value = 1}, + { .input = &tegra_sync_source_list[2], .value = 2}, + { .input = &tegra_sync_source_list[3], .value = 3}, + { .input = &tegra_sync_source_list[4], .value = 4}, + { .input = &tegra_sync_source_list[5], .value = 5}, + { .input = &tegra_pll_a_out0, .value = 6}, + { .input = &tegra_sync_source_list[6], .value = 7}, + { 0, 0 } +}; + +#define AUDIO_SYNC_CLK(_id, _index) \ + { \ + .name = #_id, \ + .inputs = mux_audio_sync_clk, \ + .reg = 0x4A0 + (_index) * 4, \ + .max_rate = 24000000, \ + .ops = &tegra_audio_sync_clk_ops \ + } +static struct clk tegra_clk_audio_list[] = { + AUDIO_SYNC_CLK(audio0, 0), + AUDIO_SYNC_CLK(audio1, 1), + AUDIO_SYNC_CLK(audio2, 2), + AUDIO_SYNC_CLK(audio3, 3), + AUDIO_SYNC_CLK(audio4, 4), + AUDIO_SYNC_CLK(audio, 5), /* SPDIF */ +}; + +#define AUDIO_SYNC_2X_CLK(_id, _index) \ + { \ + .name = #_id "_2x", \ + .flags = PERIPH_NO_RESET, \ + .max_rate = 48000000, \ + .ops = &tegra_clk_double_ops, \ + .reg = 0x49C, \ + .reg_shift = 24 + (_index), \ + .parent = &tegra_clk_audio_list[(_index)], \ + .u.periph = { \ + .clk_num = 113 + (_index), \ + }, \ + } +static struct clk tegra_clk_audio_2x_list[] = { + AUDIO_SYNC_2X_CLK(audio0, 0), + AUDIO_SYNC_2X_CLK(audio1, 1), + AUDIO_SYNC_2X_CLK(audio2, 2), + AUDIO_SYNC_2X_CLK(audio3, 3), + AUDIO_SYNC_2X_CLK(audio4, 4), + AUDIO_SYNC_2X_CLK(audio, 5), /* SPDIF */ +}; + +#define MUX_I2S_SPDIF(_id, _index) \ +static struct clk_mux_sel mux_pllaout0_##_id##_2x_pllp_clkm[] = { \ + {.input = &tegra_pll_a_out0, .value = 0}, \ + {.input = &tegra_clk_audio_2x_list[(_index)], .value = 1}, \ + {.input = &tegra_pll_p, .value = 2}, \ + {.input = &tegra_clk_m, .value = 3}, \ + { 0, 0}, \ +} +MUX_I2S_SPDIF(audio0, 0); +MUX_I2S_SPDIF(audio1, 1); +MUX_I2S_SPDIF(audio2, 2); +MUX_I2S_SPDIF(audio3, 3); +MUX_I2S_SPDIF(audio4, 4); +MUX_I2S_SPDIF(audio, 5); /* SPDIF */ + +/* External clock outputs (through PMC) */ +#define MUX_EXTERN_OUT(_id) \ +static struct clk_mux_sel mux_clkm_clkm2_clkm4_extern##_id[] = { \ + {.input = &tegra_clk_m, .value = 0}, \ + {.input = &tegra_clk_m_div2, .value = 1}, \ + {.input = &tegra_clk_m_div4, .value = 2}, \ + {.input = NULL, .value = 3}, /* placeholder */ \ + { 0, 0}, \ +} +MUX_EXTERN_OUT(1); +MUX_EXTERN_OUT(2); +MUX_EXTERN_OUT(3); + +static struct clk_mux_sel *mux_extern_out_list[] = { + mux_clkm_clkm2_clkm4_extern1, + mux_clkm_clkm2_clkm4_extern2, + mux_clkm_clkm2_clkm4_extern3, +}; + +#define CLK_OUT_CLK(_id) \ + { \ + .name = "clk_out_" #_id, \ + .lookup = { \ + .dev_id = "clk_out_" #_id, \ + .con_id = "extern" #_id, \ + }, \ + .ops = &tegra_clk_out_ops, \ + .reg = 0x1a8, \ + .inputs = mux_clkm_clkm2_clkm4_extern##_id, \ + .flags = MUX_CLK_OUT, \ + .max_rate = 216000000, \ + .u.periph = { \ + .clk_num = (_id - 1) * 8 + 2, \ + }, \ + } +static struct clk tegra_clk_out_list[] = { + CLK_OUT_CLK(1), + CLK_OUT_CLK(2), + CLK_OUT_CLK(3), +}; + +/* called after peripheral external clocks are initialized */ +static void init_clk_out_mux(void) +{ + int i; + struct clk *c; + + /* output clock con_id is the name of peripheral + external clock connected to input 3 of the output mux */ + for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++) { + c = tegra_get_clock_by_name( + tegra_clk_out_list[i].lookup.con_id); + if (!c) + pr_err("%s: could not find clk %s\n", __func__, + tegra_clk_out_list[i].lookup.con_id); + mux_extern_out_list[i][3].input = c; + } +} + +/* Peripheral muxes */ +static struct clk_mux_sel mux_sclk[] = { + { .input = &tegra_clk_m, .value = 0}, + { .input = &tegra_pll_c_out1, .value = 1}, + { .input = &tegra_pll_p_out4, .value = 2}, + { .input = &tegra_pll_p_out3, .value = 3}, + { .input = &tegra_pll_p_out2, .value = 4}, + /* { .input = &tegra_clk_d, .value = 5}, - no use on tegra30 */ + { .input = &tegra_clk_32k, .value = 6}, + { .input = &tegra_pll_m_out1, .value = 7}, + { 0, 0}, +}; + +static struct clk tegra_clk_sclk = { + .name = "sclk", + .inputs = mux_sclk, + .reg = 0x28, + .ops = &tegra_super_ops, + .max_rate = 334000000, + .min_rate = 40000000, +}; + +static struct clk tegra_clk_blink = { + .name = "blink", + .parent = &tegra_clk_32k, + .reg = 0x40, + .ops = &tegra_blink_clk_ops, + .max_rate = 32768, +}; + +static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = { + { .input = &tegra_pll_m, .value = 0}, + { .input = &tegra_pll_c, .value = 1}, + { .input = &tegra_pll_p, .value = 2}, + { .input = &tegra_pll_a_out0, .value = 3}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = { + { .input = &tegra_pll_p, .value = 0}, + { .input = &tegra_pll_c, .value = 1}, + { .input = &tegra_pll_m, .value = 2}, + { .input = &tegra_clk_m, .value = 3}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_pllp_clkm[] = { + { .input = &tegra_pll_p, .value = 0}, + { .input = &tegra_clk_m, .value = 3}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = { + {.input = &tegra_pll_p, .value = 0}, + {.input = &tegra_pll_d_out0, .value = 1}, + {.input = &tegra_pll_c, .value = 2}, + {.input = &tegra_clk_m, .value = 3}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = { + {.input = &tegra_pll_p, .value = 0}, + {.input = &tegra_pll_m, .value = 1}, + {.input = &tegra_pll_d_out0, .value = 2}, + {.input = &tegra_pll_a_out0, .value = 3}, + {.input = &tegra_pll_c, .value = 4}, + {.input = &tegra_pll_d2_out0, .value = 5}, + {.input = &tegra_clk_m, .value = 6}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_plla_pllc_pllp_clkm[] = { + { .input = &tegra_pll_a_out0, .value = 0}, + /* { .input = &tegra_pll_c, .value = 1}, no use on tegra30 */ + { .input = &tegra_pll_p, .value = 2}, + { .input = &tegra_clk_m, .value = 3}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_pllp_pllc_clk32_clkm[] = { + {.input = &tegra_pll_p, .value = 0}, + {.input = &tegra_pll_c, .value = 1}, + {.input = &tegra_clk_32k, .value = 2}, + {.input = &tegra_clk_m, .value = 3}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_pllp_pllc_clkm_clk32[] = { + {.input = &tegra_pll_p, .value = 0}, + {.input = &tegra_pll_c, .value = 1}, + {.input = &tegra_clk_m, .value = 2}, + {.input = &tegra_clk_32k, .value = 3}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_pllp_pllc_pllm[] = { + {.input = &tegra_pll_p, .value = 0}, + {.input = &tegra_pll_c, .value = 1}, + {.input = &tegra_pll_m, .value = 2}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_clk_m[] = { + { .input = &tegra_clk_m, .value = 0}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_pllp_out3[] = { + { .input = &tegra_pll_p_out3, .value = 0}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_plld_out0[] = { + { .input = &tegra_pll_d_out0, .value = 0}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_plld_out0_plld2_out0[] = { + { .input = &tegra_pll_d_out0, .value = 0}, + { .input = &tegra_pll_d2_out0, .value = 1}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_clk_32k[] = { + { .input = &tegra_clk_32k, .value = 0}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_plla_clk32_pllp_clkm_plle[] = { + { .input = &tegra_pll_a_out0, .value = 0}, + { .input = &tegra_clk_32k, .value = 1}, + { .input = &tegra_pll_p, .value = 2}, + { .input = &tegra_clk_m, .value = 3}, + { .input = &tegra_pll_e, .value = 4}, + { 0, 0}, +}; + +static struct clk_mux_sel mux_cclk_g[] = { + { .input = &tegra_clk_m, .value = 0}, + { .input = &tegra_pll_c, .value = 1}, + { .input = &tegra_clk_32k, .value = 2}, + { .input = &tegra_pll_m, .value = 3}, + { .input = &tegra_pll_p, .value = 4}, + { .input = &tegra_pll_p_out4, .value = 5}, + { .input = &tegra_pll_p_out3, .value = 6}, + { .input = &tegra_pll_x, .value = 8}, + { 0, 0}, +}; + +static struct clk tegra_clk_cclk_g = { + .name = "cclk_g", + .flags = DIV_U71 | DIV_U71_INT, + .inputs = mux_cclk_g, + .reg = 0x368, + .ops = &tegra_super_ops, + .max_rate = 1700000000, +}; + +static struct clk tegra30_clk_twd = { + .parent = &tegra_clk_cclk_g, + .name = "twd", + .ops = &tegra30_twd_ops, + .max_rate = 1400000000, /* Same as tegra_clk_cpu_cmplx.max_rate */ + .mul = 1, + .div = 2, +}; + +#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \ + { \ + .name = _name, \ + .lookup = { \ + .dev_id = _dev, \ + .con_id = _con, \ + }, \ + .ops = &tegra_periph_clk_ops, \ + .reg = _reg, \ + .inputs = _inputs, \ + .flags = _flags, \ + .max_rate = _max, \ + .u.periph = { \ + .clk_num = _clk_num, \ + }, \ + } + +#define PERIPH_CLK_EX(_name, _dev, _con, _clk_num, _reg, _max, _inputs, \ + _flags, _ops) \ + { \ + .name = _name, \ + .lookup = { \ + .dev_id = _dev, \ + .con_id = _con, \ + }, \ + .ops = _ops, \ + .reg = _reg, \ + .inputs = _inputs, \ + .flags = _flags, \ + .max_rate = _max, \ + .u.periph = { \ + .clk_num = _clk_num, \ + }, \ + } + +#define SHARED_CLK(_name, _dev, _con, _parent, _id, _div, _mode)\ + { \ + .name = _name, \ + .lookup = { \ + .dev_id = _dev, \ + .con_id = _con, \ + }, \ + .ops = &tegra_clk_shared_bus_ops, \ + .parent = _parent, \ + .u.shared_bus_user = { \ + .client_id = _id, \ + .client_div = _div, \ + .mode = _mode, \ + }, \ + } +struct clk tegra_list_clks[] = { + PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 26000000, mux_clk_m, 0), + PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB), + PERIPH_CLK("kbc", "tegra-kbc", NULL, 36, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB), + PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0), + PERIPH_CLK("kfuse", "kfuse-tegra", NULL, 40, 0, 26000000, mux_clk_m, 0), + PERIPH_CLK("fuse", "fuse-tegra", "fuse", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB), + PERIPH_CLK("fuse_burn", "fuse-tegra", "fuse_burn", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB), + PERIPH_CLK("apbif", "tegra30-ahub", "apbif", 107, 0, 26000000, mux_clk_m, 0), + PERIPH_CLK("i2s0", "tegra30-i2s.0", NULL, 30, 0x1d8, 26000000, mux_pllaout0_audio0_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("i2s1", "tegra30-i2s.1", NULL, 11, 0x100, 26000000, mux_pllaout0_audio1_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("i2s2", "tegra30-i2s.2", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("i2s3", "tegra30-i2s.3", NULL, 101, 0x3bc, 26000000, mux_pllaout0_audio3_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("i2s4", "tegra30-i2s.4", NULL, 102, 0x3c0, 26000000, mux_pllaout0_audio4_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("spdif_out", "tegra30-spdif", "spdif_out", 10, 0x108, 100000000, mux_pllaout0_audio_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("spdif_in", "tegra30-spdif", "spdif_in", 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_clk32_clkm, MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("d_audio", "tegra30-ahub", "d_audio", 106, 0x3d0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71), + PERIPH_CLK("dam0", "tegra30-dam.0", NULL, 108, 0x3d8, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71), + PERIPH_CLK("dam1", "tegra30-dam.1", NULL, 109, 0x3dc, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71), + PERIPH_CLK("dam2", "tegra30-dam.2", NULL, 110, 0x3e0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71), + PERIPH_CLK("hda", "tegra30-hda", "hda", 125, 0x428, 108000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("hda2codec_2x", "tegra30-hda", "hda2codec", 111, 0x3e4, 48000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("hda2hdmi", "tegra30-hda", "hda2hdmi", 128, 0, 48000000, mux_clk_m, 0), + PERIPH_CLK("sbc1", "spi_tegra.0", NULL, 41, 0x134, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("sbc2", "spi_tegra.1", NULL, 44, 0x118, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("sbc3", "spi_tegra.2", NULL, 46, 0x11c, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("sbc4", "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("sbc5", "spi_tegra.4", NULL, 104, 0x3c8, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("sbc6", "spi_tegra.5", NULL, 105, 0x3cc, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("sata_oob", "tegra_sata_oob", NULL, 123, 0x420, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("sata", "tegra_sata", NULL, 124, 0x424, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("sata_cold", "tegra_sata_cold", NULL, 129, 0, 48000000, mux_clk_m, 0), + PERIPH_CLK_EX("ndflash", "tegra_nand", NULL, 13, 0x160, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71, &tegra_nand_clk_ops), + PERIPH_CLK("ndspeed", "tegra_nand_speed", NULL, 80, 0x3f8, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("vfir", "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("sdmmc1", "sdhci-tegra.0", NULL, 14, 0x150, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("sdmmc2", "sdhci-tegra.1", NULL, 9, 0x154, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("sdmmc3", "sdhci-tegra.2", NULL, 69, 0x1bc, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("sdmmc4", "sdhci-tegra.3", NULL, 15, 0x164, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("vcp", "tegra-avp", "vcp", 29, 0, 250000000, mux_clk_m, 0), + PERIPH_CLK("bsea", "tegra-avp", "bsea", 62, 0, 250000000, mux_clk_m, 0), + PERIPH_CLK("bsev", "tegra-aes", "bsev", 63, 0, 250000000, mux_clk_m, 0), + PERIPH_CLK("vde", "vde", NULL, 61, 0x1c8, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT), + PERIPH_CLK("csite", "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* max rate ??? */ + PERIPH_CLK("la", "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("owr", "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("nor", "nor", NULL, 42, 0x1d0, 127000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("mipi", "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), /* scales with voltage */ + PERIPH_CLK("i2c1", "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB), + PERIPH_CLK("i2c2", "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB), + PERIPH_CLK("i2c3", "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB), + PERIPH_CLK("i2c4", "tegra-i2c.3", NULL, 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB), + PERIPH_CLK("i2c5", "tegra-i2c.4", NULL, 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB), + PERIPH_CLK("uarta", "tegra_uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uartb", "tegra_uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uartc", "tegra_uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uartd", "tegra_uart.3", NULL, 65, 0x1c0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uarte", "tegra_uart.4", NULL, 66, 0x1c4, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uarta_dbg", "serial8250.0", "uarta", 6, 0x178, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uartb_dbg", "serial8250.0", "uartb", 7, 0x17c, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uartc_dbg", "serial8250.0", "uartc", 55, 0x1a0, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uartd_dbg", "serial8250.0", "uartd", 65, 0x1c0, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uarte_dbg", "serial8250.0", "uarte", 66, 0x1c4, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK_EX("vi", "tegra_camera", "vi", 20, 0x148, 425000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT, &tegra_vi_clk_ops), + PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET), + PERIPH_CLK("3d2", "3d2", NULL, 98, 0x3b0, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET), + PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE), + PERIPH_CLK("vi_sensor", "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET), + PERIPH_CLK("epp", "epp", NULL, 19, 0x16c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT), + PERIPH_CLK("mpe", "mpe", NULL, 60, 0x170, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT), + PERIPH_CLK("host1x", "host1x", NULL, 28, 0x180, 260000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT), + PERIPH_CLK("cve", "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK_EX("dtv", "dtv", NULL, 79, 0x1dc, 250000000, mux_clk_m, 0, &tegra_dtv_clk_ops), + PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 148500000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8 | DIV_U71), + PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 220000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8), + PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8), + PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ + PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ + PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ + PERIPH_CLK("dsia", "tegradc.0", "dsia", 48, 0, 500000000, mux_plld_out0, 0), + PERIPH_CLK_EX("dsib", "tegradc.1", "dsib", 82, 0xd0, 500000000, mux_plld_out0_plld2_out0, MUX | PLLD, &tegra_dsib_clk_ops), + PERIPH_CLK("csi", "tegra_camera", "csi", 52, 0, 102000000, mux_pllp_out3, 0), + PERIPH_CLK("isp", "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0), /* same frequency as VI */ + PERIPH_CLK("csus", "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET), + + PERIPH_CLK("tsensor", "tegra-tsensor", NULL, 100, 0x3b8, 216000000, mux_pllp_pllc_clkm_clk32, MUX | DIV_U71), + PERIPH_CLK("actmon", "actmon", NULL, 119, 0x3e8, 216000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71), + PERIPH_CLK("extern1", "extern1", NULL, 120, 0x3ec, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71), + PERIPH_CLK("extern2", "extern2", NULL, 121, 0x3f0, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71), + PERIPH_CLK("extern3", "extern3", NULL, 122, 0x3f4, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71), + PERIPH_CLK("i2cslow", "i2cslow", NULL, 81, 0x3fc, 26000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("pcie", "tegra-pcie", "pcie", 70, 0, 250000000, mux_clk_m, 0), + PERIPH_CLK("afi", "tegra-pcie", "afi", 72, 0, 250000000, mux_clk_m, 0), + PERIPH_CLK("se", "se", NULL, 127, 0x42c, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT), +}; + +#define CLK_DUPLICATE(_name, _dev, _con) \ + { \ + .name = _name, \ + .lookup = { \ + .dev_id = _dev, \ + .con_id = _con, \ + }, \ + } + +/* Some clocks may be used by different drivers depending on the board + * configuration. List those here to register them twice in the clock lookup + * table under two names. + */ +struct clk_duplicate tegra_clk_duplicates[] = { + CLK_DUPLICATE("usbd", "utmip-pad", NULL), + CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), + CLK_DUPLICATE("usbd", "tegra-otg", NULL), + CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), + CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), + CLK_DUPLICATE("dsib", "tegradc.0", "dsib"), + CLK_DUPLICATE("dsia", "tegradc.1", "dsia"), + CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL), + CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL), + CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL), + CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL), + CLK_DUPLICATE("bsev", "tegra-avp", "bsev"), + CLK_DUPLICATE("bsev", "nvavp", "bsev"), + CLK_DUPLICATE("vde", "tegra-aes", "vde"), + CLK_DUPLICATE("bsea", "tegra-aes", "bsea"), + CLK_DUPLICATE("bsea", "nvavp", "bsea"), + CLK_DUPLICATE("cml1", "tegra_sata_cml", NULL), + CLK_DUPLICATE("cml0", "tegra_pcie", "cml"), + CLK_DUPLICATE("pciex", "tegra_pcie", "pciex"), + CLK_DUPLICATE("i2c1", "tegra-i2c-slave.0", NULL), + CLK_DUPLICATE("i2c2", "tegra-i2c-slave.1", NULL), + CLK_DUPLICATE("i2c3", "tegra-i2c-slave.2", NULL), + CLK_DUPLICATE("i2c4", "tegra-i2c-slave.3", NULL), + CLK_DUPLICATE("i2c5", "tegra-i2c-slave.4", NULL), + CLK_DUPLICATE("sbc1", "spi_slave_tegra.0", NULL), + CLK_DUPLICATE("sbc2", "spi_slave_tegra.1", NULL), + CLK_DUPLICATE("sbc3", "spi_slave_tegra.2", NULL), + CLK_DUPLICATE("sbc4", "spi_slave_tegra.3", NULL), + CLK_DUPLICATE("sbc5", "spi_slave_tegra.4", NULL), + CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL), + CLK_DUPLICATE("twd", "smp_twd", NULL), + CLK_DUPLICATE("vcp", "nvavp", "vcp"), +}; + +struct clk *tegra_ptr_clks[] = { + &tegra_clk_32k, + &tegra_clk_m, + &tegra_clk_m_div2, + &tegra_clk_m_div4, + &tegra_pll_ref, + &tegra_pll_m, + &tegra_pll_m_out1, + &tegra_pll_c, + &tegra_pll_c_out1, + &tegra_pll_p, + &tegra_pll_p_out1, + &tegra_pll_p_out2, + &tegra_pll_p_out3, + &tegra_pll_p_out4, + &tegra_pll_a, + &tegra_pll_a_out0, + &tegra_pll_d, + &tegra_pll_d_out0, + &tegra_pll_d2, + &tegra_pll_d2_out0, + &tegra_pll_u, + &tegra_pll_x, + &tegra_pll_x_out0, + &tegra_pll_e, + &tegra_clk_cclk_g, + &tegra_cml0_clk, + &tegra_cml1_clk, + &tegra_pciex_clk, + &tegra_clk_sclk, + &tegra_clk_blink, + &tegra30_clk_twd, +}; + + +static void tegra30_init_one_clock(struct clk *c) +{ + clk_init(c); + INIT_LIST_HEAD(&c->shared_bus_list); + if (!c->lookup.dev_id && !c->lookup.con_id) + c->lookup.con_id = c->name; + c->lookup.clk = c; + clkdev_add(&c->lookup); +} + +void __init tegra30_init_clocks(void) +{ + int i; + struct clk *c; + + for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++) + tegra30_init_one_clock(tegra_ptr_clks[i]); + + for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++) + tegra30_init_one_clock(&tegra_list_clks[i]); + + for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) { + c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name); + if (!c) { + pr_err("%s: Unknown duplicate clock %s\n", __func__, + tegra_clk_duplicates[i].name); + continue; + } + + tegra_clk_duplicates[i].lookup.clk = c; + clkdev_add(&tegra_clk_duplicates[i].lookup); + } + + for (i = 0; i < ARRAY_SIZE(tegra_sync_source_list); i++) + tegra30_init_one_clock(&tegra_sync_source_list[i]); + for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_list); i++) + tegra30_init_one_clock(&tegra_clk_audio_list[i]); + for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_2x_list); i++) + tegra30_init_one_clock(&tegra_clk_audio_2x_list[i]); + + init_clk_out_mux(); + for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++) + tegra30_init_one_clock(&tegra_clk_out_list[i]); + +} diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index 1d1acda4f3e0..1eed8d4a80ef 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -28,7 +28,7 @@ #include <linux/io.h> #include <asm/mach/time.h> -#include <asm/localtimer.h> +#include <asm/smp_twd.h> #include <asm/sched_clock.h> #include <mach/iomap.h> @@ -162,6 +162,21 @@ static struct irqaction tegra_timer_irq = { .irq = INT_TMR3, }; +#ifdef CONFIG_HAVE_ARM_TWD +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, + TEGRA_ARM_PERIF_BASE + 0x600, + IRQ_LOCALTIMER); + +static void __init tegra_twd_init(void) +{ + int err = twd_local_timer_register(&twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); +} +#else +#define tegra_twd_init() do {} while(0) +#endif + static void __init tegra_init_timer(void) { struct clk *clk; @@ -188,10 +203,6 @@ static void __init tegra_init_timer(void) else clk_enable(clk); -#ifdef CONFIG_HAVE_ARM_TWD - twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600); -#endif - switch (rate) { case 12000000: timer_writel(0x000b, TIMERUS_USEC_CFG); @@ -231,6 +242,7 @@ static void __init tegra_init_timer(void) tegra_clockevent.cpumask = cpu_all_mask; tegra_clockevent.irq = tegra_timer_irq.irq; clockevents_register_device(&tegra_clockevent); + tegra_twd_init(); } struct sys_timer tegra_timer = { diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c index ad321f9e2bb8..c5b2ac04e2a0 100644 --- a/arch/arm/mach-tegra/usb_phy.c +++ b/arch/arm/mach-tegra/usb_phy.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> @@ -730,6 +731,7 @@ err0: kfree(phy); return ERR_PTR(err); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_open); int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) { @@ -738,6 +740,7 @@ int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) else return utmi_phy_power_on(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_power_on); void tegra_usb_phy_power_off(struct tegra_usb_phy *phy) { @@ -746,18 +749,21 @@ void tegra_usb_phy_power_off(struct tegra_usb_phy *phy) else utmi_phy_power_off(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_power_off); void tegra_usb_phy_preresume(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_preresume(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); void tegra_usb_phy_postresume(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_postresume(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, enum tegra_usb_phy_port_speed port_speed) @@ -765,24 +771,28 @@ void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, if (!phy_is_ulpi(phy)) utmi_phy_restore_start(phy, port_speed); } +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_restore_end(phy); } +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_clk_disable(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable); void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy) { if (!phy_is_ulpi(phy)) utmi_phy_clk_enable(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable); void tegra_usb_phy_close(struct tegra_usb_phy *phy) { @@ -794,3 +804,4 @@ void tegra_usb_phy_close(struct tegra_usb_phy *phy) clk_put(phy->pll_u); kfree(phy); } +EXPORT_SYMBOL_GPL(tegra_usb_phy_close); diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 285538124e5e..fd3a5c382f47 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -8,7 +8,6 @@ obj-n := obj- := obj-$(CONFIG_ARCH_U300) += u300.o -obj-$(CONFIG_MMC) += mmc.o obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_I2C_STU300) += i2c.o diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b4c6926a700c..8b90c44d237f 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -18,6 +18,7 @@ #include <linux/termios.h> #include <linux/dmaengine.h> #include <linux/amba/bus.h> +#include <linux/amba/mmci.h> #include <linux/amba/serial.h> #include <linux/platform_device.h> #include <linux/gpio.h> @@ -26,7 +27,8 @@ #include <linux/mtd/nand.h> #include <linux/mtd/fsmc.h> #include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf-generic.h> #include <linux/dma-mapping.h> #include <asm/types.h> @@ -43,9 +45,9 @@ #include <mach/gpio-u300.h> #include "clock.h" -#include "mmc.h" #include "spi.h" #include "i2c.h" +#include "u300-gpio.h" /* * Static I/O mappings that are needed for booting the U300 platforms. The @@ -94,19 +96,9 @@ static struct amba_pl011_data uart0_plat_data = { #endif }; -static struct amba_device uart0_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "uart0", /* Slow device at 0x3000 offset */ - .platform_data = &uart0_plat_data, - }, - .res = { - .start = U300_UART0_BASE, - .end = U300_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART0, NO_IRQ }, -}; +/* Slow device at 0x3000 offset */ +static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, + { IRQ_U300_UART0 }, &uart0_plat_data); /* The U335 have an additional UART1 on the APP CPU */ #ifdef CONFIG_MACH_U300_BS335 @@ -118,72 +110,42 @@ static struct amba_pl011_data uart1_plat_data = { #endif }; -static struct amba_device uart1_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "uart1", /* Fast device at 0x7000 offset */ - .platform_data = &uart1_plat_data, - }, - .res = { - .start = U300_UART1_BASE, - .end = U300_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART1, NO_IRQ }, -}; +/* Fast device at 0x7000 offset */ +static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, + { IRQ_U300_UART1 }, &uart1_plat_data); #endif -static struct amba_device pl172_device = { - .dev = { - .init_name = "pl172", /* AHB device at 0x4000 offset */ - .platform_data = NULL, - }, - .res = { - .start = U300_EMIF_CFG_BASE, - .end = U300_EMIF_CFG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; +/* AHB device at 0x4000 offset */ +static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); +/* Fast device at 0x6000 offset */ +static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE, + { IRQ_U300_SPI }, NULL); -/* - * Everything within this next ifdef deals with external devices connected to - * the APP SPI bus. - */ -static struct amba_device pl022_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "pl022", /* Fast device at 0x6000 offset */ - }, - .res = { - .start = U300_SPI_BASE, - .end = U300_SPI_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_SPI, NO_IRQ }, - /* - * This device has a DMA channel but the Linux driver does not use - * it currently. - */ -}; +/* Fast device at 0x1000 offset */ +#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 } -static struct amba_device mmcsd_device = { - .dev = { - .init_name = "mmci", /* Fast device at 0x1000 offset */ - .platform_data = NULL, /* Added later */ - }, - .res = { - .start = U300_MMCSD_BASE, - .end = U300_MMCSD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }, +static struct mmci_platform_data mmcsd_platform_data = { /* - * This device has a DMA channel but the Linux driver does not use - * it currently. + * Do not set ocr_mask or voltage translation function, + * we have a regulator we can control instead. */ + .f_max = 24000000, + .gpio_wp = -1, + .gpio_cd = U300_GPIO_PIN_MMC_CD, + .cd_invert = true, + .capabilities = MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, +#ifdef CONFIG_COH901318 + .dma_filter = coh901318_filter_id, + .dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX, + /* Don't specify a TX channel, this RX channel is bidirectional */ +#endif }; +static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, + U300_MMCSD_IRQS, &mmcsd_platform_data); + /* * The order of device declaration may be important, since some devices * have dependencies on other devices being initialized first. @@ -1477,7 +1439,7 @@ static struct coh901318_platform coh901318_platform = { .max_channels = U300_DMA_CHANNELS, }; -static struct resource pinmux_resources[] = { +static struct resource pinctrl_resources[] = { { .start = U300_SYSCON_BASE, .end = U300_SYSCON_BASE + SZ_4K - 1, @@ -1506,6 +1468,13 @@ static struct platform_device i2c1_device = { .resource = i2c1_resources, }; +static struct platform_device pinctrl_device = { + .name = "pinctrl-u300", + .id = -1, + .num_resources = ARRAY_SIZE(pinctrl_resources), + .resource = pinctrl_resources, +}; + /* * The different variants have a few different versions of the * GPIO block, with different number of ports. @@ -1525,6 +1494,7 @@ static struct u300_gpio_platform u300_gpio_plat = { #endif .gpio_base = 0, .gpio_irq_base = IRQ_U300_GPIO_BASE, + .pinctrl_device = &pinctrl_device, }; static struct platform_device gpio_device = { @@ -1597,71 +1567,67 @@ static struct platform_device dma_device = { }, }; -static struct platform_device pinmux_device = { - .name = "pinmux-u300", - .id = -1, - .num_resources = ARRAY_SIZE(pinmux_resources), - .resource = pinmux_resources, +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1), +}; + +static unsigned long pin_highz_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0), }; -/* Pinmux settings */ -static struct pinmux_map __initdata u300_pinmux_map[] = { +/* Pin control settings */ +static struct pinctrl_map __initdata u300_pinmux_map[] = { /* anonymous maps for chip power and EMIFs */ - PINMUX_MAP_SYS_HOG("POWER", "pinmux-u300", "power"), - PINMUX_MAP_SYS_HOG("EMIF0", "pinmux-u300", "emif0"), - PINMUX_MAP_SYS_HOG("EMIF1", "pinmux-u300", "emif1"), + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"), + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"), + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"), /* per-device maps for MMC/SD, SPI and UART */ - PINMUX_MAP("MMCSD", "pinmux-u300", "mmc0", "mmci"), - PINMUX_MAP("SPI", "pinmux-u300", "spi0", "pl022"), - PINMUX_MAP("UART0", "pinmux-u300", "uart0", "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("mmci", "pinctrl-u300", NULL, "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"), + /* This pin is used for clock return rather than GPIO */ + PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11", + pin_pullup_conf), + /* This pin is used for card detect */ + PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS", + pin_highz_conf), }; struct u300_mux_hog { - const char *name; struct device *dev; - struct pinmux *pmx; + struct pinctrl *p; }; static struct u300_mux_hog u300_mux_hogs[] = { { - .name = "uart0", .dev = &uart0_device.dev, }, { - .name = "spi0", .dev = &pl022_device.dev, }, { - .name = "mmc0", .dev = &mmcsd_device.dev, }, }; -static int __init u300_pinmux_fetch(void) +static int __init u300_pinctrl_fetch(void) { int i; for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) { - struct pinmux *pmx; - int ret; + struct pinctrl *p; - pmx = pinmux_get(u300_mux_hogs[i].dev, NULL); - if (IS_ERR(pmx)) { - pr_err("u300: could not get pinmux hog %s\n", - u300_mux_hogs[i].name); - continue; - } - ret = pinmux_enable(pmx); - if (ret) { - pr_err("u300: could enable pinmux hog %s\n", - u300_mux_hogs[i].name); + p = pinctrl_get_select_default(u300_mux_hogs[i].dev); + if (IS_ERR(p)) { + pr_err("u300: could not get pinmux hog for dev %s\n", + dev_name(u300_mux_hogs[i].dev)); continue; } - u300_mux_hogs[i].pmx = pmx; + u300_mux_hogs[i].p = p; } return 0; } -subsys_initcall(u300_pinmux_fetch); +subsys_initcall(u300_pinctrl_fetch); /* * Notice that AMBA devices are initialized before platform devices. @@ -1676,7 +1642,6 @@ static struct platform_device *platform_devs[] __initdata = { &gpio_device, &nand_device, &wdog_device, - &pinmux_device, }; /* @@ -1861,8 +1826,8 @@ void __init u300_init_devices(void) u300_assign_physmem(); /* Initialize pinmuxing */ - pinmux_register_mappings(u300_pinmux_map, - ARRAY_SIZE(u300_pinmux_map)); + pinctrl_register_mappings(u300_pinmux_map, + ARRAY_SIZE(u300_pinmux_map)); /* Register subdevices on the I2C buses */ u300_i2c_register_board_devices(); @@ -1879,16 +1844,6 @@ void __init u300_init_devices(void) writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR); } -static int core_module_init(void) -{ - /* - * This needs to be initialized later: it needs the input framework - * to be initialized first. - */ - return mmc_init(&mmcsd_device); -} -module_init(core_module_init); - /* Forward declare this function from the watchdog */ void coh901327_watchdog_reset(void); diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S deleted file mode 100644 index 7181d6ac6651..000000000000 --- a/arch/arm/mach-u300/include/mach/entry-macro.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * - * arch-arm/mach-u300/include/mach/entry-macro.S - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Low-level IRQ helper macros for ST-Ericsson U300 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h index bf4c7935aecd..e81400c1753a 100644 --- a/arch/arm/mach-u300/include/mach/gpio-u300.h +++ b/arch/arm/mach-u300/include/mach/gpio-u300.h @@ -24,12 +24,14 @@ enum u300_gpio_variant { * @ports: number of GPIO block ports * @gpio_base: first GPIO number for this block (use a free range) * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) + * @pinctrl_device: pin control device to spawn as child */ struct u300_gpio_platform { enum u300_gpio_variant variant; u8 ports; int gpio_base; int gpio_irq_base; + struct platform_device *pinctrl_device; }; #endif /* __MACH_U300_GPIO_U300_H */ diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h deleted file mode 100644 index 574d46e38290..000000000000 --- a/arch/arm/mach-u300/include/mach/system.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/system.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * System shutdown and reset functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c deleted file mode 100644 index 05abd6ad9fab..000000000000 --- a/arch/arm/mach-u300/mmc.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * - * arch/arm/mach-u300/mmc.c - * - * - * Copyright (C) 2009 ST-Ericsson SA - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Johan Lundin - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - */ -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/mmc/host.h> -#include <linux/dmaengine.h> -#include <linux/amba/mmci.h> -#include <linux/slab.h> -#include <mach/coh901318.h> -#include <mach/dma_channels.h> - -#include "u300-gpio.h" -#include "mmc.h" - -static struct mmci_platform_data mmc0_plat_data = { - /* - * Do not set ocr_mask or voltage translation function, - * we have a regulator we can control instead. - */ - /* Nominally 2.85V on our platform */ - .f_max = 24000000, - .gpio_wp = -1, - .gpio_cd = U300_GPIO_PIN_MMC_CD, - .cd_invert = true, - .capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, -#ifdef CONFIG_COH901318 - .dma_filter = coh901318_filter_id, - .dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX, - /* Don't specify a TX channel, this RX channel is bidirectional */ -#endif -}; - -int __devinit mmc_init(struct amba_device *adev) -{ - struct device *mmcsd_device = &adev->dev; - int ret = 0; - - mmcsd_device->platform_data = &mmc0_plat_data; - - return ret; -} diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h deleted file mode 100644 index 92b85125abb3..000000000000 --- a/arch/arm/mach-u300/mmc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * - * arch/arm/mach-u300/mmc.h - * - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - */ -#ifndef MMC_H -#define MMC_H - -#include <linux/amba/bus.h> - -int __devinit mmc_init(struct amba_device *adev); - -#endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c59e8b892d6b..880d02ec89d4 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -8,47 +8,62 @@ config UX500_SOC_COMMON select PL310_ERRATA_753970 select ARM_ERRATA_754322 select ARM_ERRATA_764369 - -menu "Ux500 SoC" + select CACHE_L2X0 config UX500_SOC_DB5500 - bool "DB5500" + bool select MFD_DB5500_PRCMU config UX500_SOC_DB8500 - bool "DB8500" + bool select MFD_DB8500_PRCMU select REGULATOR_DB8500_PRCMU - -endmenu + select CPU_FREQ_TABLE if CPU_FREQ menu "Ux500 target platform (boards)" -config MACH_U8500 - bool "U8500 Development platform" - depends on UX500_SOC_DB8500 - select TPS6105X +config MACH_MOP500 + bool "U8500 Development platform, MOP500 versions" + select UX500_SOC_DB8500 + select I2C + select I2C_NOMADIK + select SOC_BUS help - Include support for the mop500 development platform. + Include support for the MOP500 development platform. config MACH_HREFV60 - bool "U85000 Development platform, HREFv60 version" - depends on UX500_SOC_DB8500 - help - Include support for the HREFv60 new development platform. + bool "U8500 Development platform, HREFv60 version" + select MACH_MOP500 + help + Include support for the HREFv60 new development platform. + Includes HREFv70, v71 etc. config MACH_SNOWBALL bool "U8500 Snowball platform" - depends on UX500_SOC_DB8500 - select MACH_U8500 + select MACH_MOP500 help Include support for the snowball development platform. config MACH_U5500 bool "U5500 Development platform" - depends on UX500_SOC_DB5500 + select UX500_SOC_DB5500 help Include support for the U5500 development platform. + +config UX500_AUTO_PLATFORM + def_bool y + depends on !MACH_U5500 + select MACH_MOP500 + help + At least one platform needs to be selected in order to build + a working kernel. If everything else is disabled, this + automatically enables MACH_MOP500. + +config MACH_UX500_DT + bool "Generic U8500 support using device tree" + depends on MACH_MOP500 + select USE_OF + endmenu config UX500_DEBUG_UART diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 6bd2f451c185..465b9ec9510a 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -7,7 +7,7 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o -obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ +obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ @@ -15,7 +15,6 @@ obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot index ff0a4b5b0a82..dd5cd00e2554 100644 --- a/arch/arm/mach-ux500/Makefile.boot +++ b/arch/arm/mach-ux500/Makefile.boot @@ -2,3 +2,4 @@ params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 +dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 74bfcff2bdf3..f5413dca532c 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -6,6 +6,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/bug.h> #include <asm/mach-types.h> #include <plat/pincfg.h> diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 2735d03996cf..52426a425787 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -74,6 +74,26 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), }; +static struct regulator_consumer_supply ab8500_vaud_consumers[] = { + /* AB8500 audio-codec main supply */ + REGULATOR_SUPPLY("vaud", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic1_consumers[] = { + /* AB8500 audio-codec Mic1 supply */ + REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic2_consumers[] = { + /* AB8500 audio-codec Mic2 supply */ + REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vdmic_consumers[] = { + /* AB8500 audio-codec DMic supply */ + REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"), +}; + static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { /* SoC core supply, no device */ REGULATOR_SUPPLY("v-intcore", NULL), @@ -323,6 +343,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-AUD", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, }, /* supply for v-anamic1 VAMic1-LDO */ [AB8500_LDO_ANAMIC1] = { @@ -330,6 +352,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-AMIC1", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, }, /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ [AB8500_LDO_ANAMIC2] = { @@ -337,6 +361,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-AMIC2", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, }, /* supply for v-dmic, VDMIC LDO */ [AB8500_LDO_DMIC] = { @@ -344,6 +370,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-DMIC", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers), + .consumer_supplies = ab8500_vdmic_consumers, }, /* supply for v-intcore12, VINTCORE12 LDO */ [AB8500_LDO_INTCORE] = { diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 5dde4d4ebe88..920251cf834c 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -31,21 +31,13 @@ * SDI 0 (MicroSD slot) */ -/* MMCIPOWER bits */ -#define MCI_DATA2DIREN (1 << 2) -#define MCI_CMDDIREN (1 << 3) -#define MCI_DATA0DIREN (1 << 4) -#define MCI_DATA31DIREN (1 << 5) -#define MCI_FBCLKEN (1 << 7) - /* GPIO pins used by the sdi0 level shifter */ static int sdi0_en = -1; static int sdi0_vsel = -1; -static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, - unsigned char power_mode) +static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios) { - switch (power_mode) { + switch (ios->power_mode) { case MMC_POWER_UP: case MMC_POWER_ON: /* @@ -65,8 +57,7 @@ static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, break; } - return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN | - MCI_DATA2DIREN | MCI_DATA31DIREN; + return 0; } #ifdef CONFIG_STE_DMA40 @@ -90,13 +81,17 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { #endif static struct mmci_platform_data mop500_sdi0_data = { - .vdd_handler = mop500_sdi0_vdd_handler, + .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED, .gpio_wp = -1, + .sigdir = MCI_ST_FBCLKEN | + MCI_ST_CMDDIREN | + MCI_ST_DATA0DIREN | + MCI_ST_DATA2DIREN, #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &mop500_sdi0_dma_cfg_rx, @@ -104,7 +99,7 @@ static struct mmci_platform_data mop500_sdi0_data = { #endif }; -static void sdi0_configure(void) +static void sdi0_configure(struct device *parent) { int ret; @@ -123,15 +118,15 @@ static void sdi0_configure(void) gpio_direction_output(sdi0_en, 1); /* Add the device, force v2 to subrevision 1 */ - db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); } -void mop500_sdi_tc35892_init(void) +void mop500_sdi_tc35892_init(struct device *parent) { mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; sdi0_en = GPIO_SDMMC_EN; sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL; - sdi0_configure(); + sdi0_configure(parent); } /* @@ -246,12 +241,13 @@ static struct mmci_platform_data mop500_sdi4_data = { #endif }; -void __init mop500_sdi_init(void) +void __init mop500_sdi_init(struct device *parent) { /* PoP:ed eMMC */ - db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls @@ -259,31 +255,31 @@ void __init mop500_sdi_init(void) */ } -void __init snowball_sdi_init(void) +void __init snowball_sdi_init(struct device *parent) { /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; mop500_sdi0_data.cd_invert = true; sdi0_en = SNOWBALL_SDMMC_EN_GPIO; sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; - sdi0_configure(); + sdi0_configure(parent); } -void __init hrefv60_sdi_init(void) +void __init hrefv60_sdi_init(struct device *parent) { /* PoP:ed eMMC */ - db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; sdi0_en = HREFV60_SDMMC_EN_GPIO; sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; - sdi0_configure(); + sdi0_configure(parent); /* WLAN SDIO channel */ - db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); } diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c index feb5744d98b7..ead91c968ff4 100644 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -8,7 +8,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/mfd/tc3589x.h> #include <linux/input/matrix_keypad.h> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 5c00712907d1..77d03c1fbd04 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -30,6 +30,9 @@ #include <linux/gpio_keys.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_platform.h> + #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -72,7 +75,7 @@ static struct platform_device snowball_led_dev = { }; static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { - .gpio_base = MOP500_AB8500_GPIO(0), + .gpio_base = MOP500_AB8500_PIN_GPIO(1), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, /* config_reg is the initial configuration of ab8500 pins. * The pins can be configured as GPIO or alt functions based @@ -226,7 +229,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = { static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base) { - mop500_sdi_tc35892_init(); + struct device *parent = NULL; +#if 0 + /* FIXME: Is the sdi actually part of tc3589x? */ + parent = tc3589x->dev; +#endif + mop500_sdi_tc35892_init(parent); } static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = { @@ -353,12 +361,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -static void __init mop500_i2c_init(void) +static void __init mop500_i2c_init(struct device *parent) { - db8500_add_i2c0(&u8500_i2c0_data); - db8500_add_i2c1(&u8500_i2c1_data); - db8500_add_i2c2(&u8500_i2c2_data); - db8500_add_i2c3(&u8500_i2c3_data); + db8500_add_i2c0(parent, &u8500_i2c0_data); + db8500_add_i2c1(parent, &u8500_i2c1_data); + db8500_add_i2c2(parent, &u8500_i2c2_data); + db8500_add_i2c3(parent, &u8500_i2c3_data); } static struct gpio_keys_button mop500_gpio_keys[] = { @@ -435,7 +443,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { }; #endif -static struct pl022_ssp_controller ssp0_platform_data = { +static struct pl022_ssp_controller ssp0_plat = { .bus_id = 0, #ifdef CONFIG_STE_DMA40 .enable_dma = 1, @@ -451,9 +459,9 @@ static struct pl022_ssp_controller ssp0_platform_data = { .num_chipselect = 5, }; -static void __init mop500_spi_init(void) +static void __init mop500_spi_init(struct device *parent) { - db8500_add_ssp0(&ssp0_platform_data); + db8500_add_ssp0(parent, &ssp0_plat); } #ifdef CONFIG_STE_DMA40 @@ -587,11 +595,11 @@ static struct amba_pl011_data uart2_plat = { #endif }; -static void __init mop500_uart_init(void) +static void __init mop500_uart_init(struct device *parent) { - db8500_add_uart0(&uart0_plat); - db8500_add_uart1(&uart1_plat); - db8500_add_uart2(&uart2_plat); + db8500_add_uart0(parent, &uart0_plat); + db8500_add_uart1(parent, &uart1_plat); + db8500_add_uart2(parent, &uart2_plat); } static struct platform_device *snowball_platform_devs[] __initdata = { @@ -603,21 +611,27 @@ static struct platform_device *snowball_platform_devs[] __initdata = { static void __init mop500_init_machine(void) { + struct device *parent = NULL; int i2c0_devs; + int i; mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - u8500_init_devices(); + parent = u8500_init_devices(); mop500_pins_init(); + /* FIXME: parent of ab8500 should be prcmu */ + for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) + mop500_platform_devs[i]->dev.parent = parent; + platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); - mop500_i2c_init(); - mop500_sdi_init(); - mop500_spi_init(); - mop500_uart_init(); + mop500_i2c_init(parent); + mop500_sdi_init(parent); + mop500_spi_init(parent); + mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -631,19 +645,24 @@ static void __init mop500_init_machine(void) static void __init snowball_init_machine(void) { + struct device *parent = NULL; int i2c0_devs; + int i; - u8500_init_devices(); + parent = u8500_init_devices(); snowball_pins_init(); + for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) + snowball_platform_devs[i]->dev.parent = parent; + platform_add_devices(snowball_platform_devs, ARRAY_SIZE(snowball_platform_devs)); - mop500_i2c_init(); - snowball_sdi_init(); - mop500_spi_init(); - mop500_uart_init(); + mop500_i2c_init(parent); + snowball_sdi_init(parent); + mop500_spi_init(parent); + mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); @@ -656,7 +675,9 @@ static void __init snowball_init_machine(void) static void __init hrefv60_init_machine(void) { + struct device *parent = NULL; int i2c0_devs; + int i; /* * The HREFv60 board removed a GPIO expander and routed @@ -665,17 +686,20 @@ static void __init hrefv60_init_machine(void) */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - u8500_init_devices(); + parent = u8500_init_devices(); hrefv60_pins_init(); + for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) + mop500_platform_devs[i]->dev.parent = parent; + platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); - mop500_i2c_init(); - hrefv60_sdi_init(); - mop500_spi_init(); - mop500_uart_init(); + mop500_i2c_init(parent); + hrefv60_sdi_init(parent); + mop500_spi_init(parent); + mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -718,3 +742,94 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .handle_irq = gic_handle_irq, .init_machine = snowball_init_machine, MACHINE_END + +#ifdef CONFIG_MACH_UX500_DT + +struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), + OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), + {}, +}; + +static const struct of_device_id u8500_soc_node[] = { + /* only create devices below soc node */ + { .compatible = "stericsson,db8500", }, + { }, +}; + +static void __init u8500_init_machine(void) +{ + struct device *parent = NULL; + int i2c0_devs; + int i; + + parent = u8500_init_devices(); + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + + for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) + mop500_platform_devs[i]->dev.parent = parent; + for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) + snowball_platform_devs[i]->dev.parent = parent; + + /* automatically probe child nodes of db8500 device */ + of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent); + + if (of_machine_is_compatible("st-ericsson,mop500")) { + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + mop500_pins_init(); + + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + mop500_sdi_init(parent); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + snowball_pins_init(); + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + + snowball_sdi_init(parent); + } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { + /* + * The HREFv60 board removed a GPIO expander and routed + * all these GPIO pins to the internal GPIO controller + * instead. + */ + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + hrefv60_pins_init(); + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + hrefv60_sdi_init(parent); + } + mop500_i2c_init(parent); + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static const char * u8500_dt_board_compat[] = { + "calaosystems,snowball-a9500", + "st-ericsson,hrefv60+", + "st-ericsson,u8500", + "st-ericsson,mop500", + NULL, +}; + + +DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)") + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .handle_irq = gic_handle_irq, + .init_machine = u8500_init_machine, + .dt_compat = u8500_dt_board_compat, +MACHINE_END +#endif diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index f926d3db6207..fdcfa8721bb4 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -63,7 +63,7 @@ * because the AB8500 GPIO pins are enumbered starting from 1, so the value in * parens matches the GPIO pin number in the data sheet. */ -#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1) +#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1) /*Snowball AB8500 GPIO */ #define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */ #define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */ @@ -75,10 +75,10 @@ struct i2c_board_info; -extern void mop500_sdi_init(void); -extern void snowball_sdi_init(void); -extern void hrefv60_sdi_init(void); -extern void mop500_sdi_tc35892_init(void); +extern void mop500_sdi_init(struct device *parent); +extern void snowball_sdi_init(struct device *parent); +extern void hrefv60_sdi_init(struct device *parent); +extern void mop500_sdi_tc35892_init(struct device *parent); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); void __init mop500_pins_init(void); diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c index 63c3f8058ffc..836112eedde7 100644 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = { #endif }; -void __init u5500_sdi_init(void) +void __init u5500_sdi_init(struct device *parent) { nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins)); - db5500_add_sdi0(&u5500_sdi0_data); + db5500_add_sdi0(parent, &u5500_sdi0_data); } diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 9de9e9c4dbbb..0ff4be72a809 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -97,9 +97,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = { }, }; -static void __init u5500_i2c_init(void) +static void __init u5500_i2c_init(struct device *parent) { - db5500_add_i2c2(&u5500_i2c2_data); + db5500_add_i2c2(parent, &u5500_i2c2_data); i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices)); } @@ -126,20 +126,27 @@ static struct platform_device *u5500_platform_devices[] __initdata = { &ab5500_device, }; -static void __init u5500_uart_init(void) +static void __init u5500_uart_init(struct device *parent) { - db5500_add_uart0(NULL); - db5500_add_uart1(NULL); - db5500_add_uart2(NULL); + db5500_add_uart0(parent, NULL); + db5500_add_uart1(parent, NULL); + db5500_add_uart2(parent, NULL); } static void __init u5500_init_machine(void) { - u5500_init_devices(); + struct device *parent = NULL; + int i; + + parent = u5500_init_devices(); nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins)); - u5500_i2c_init(); - u5500_sdi_init(); - u5500_uart_init(); + + u5500_i2c_init(parent); + u5500_sdi_init(parent); + u5500_uart_init(parent); + + for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++) + u5500_platform_devices[i]->dev.parent = parent; platform_add_devices(u5500_platform_devices, ARRAY_SIZE(u5500_platform_devices)); diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index da5569d83d58..77a75ed0df67 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -5,6 +5,8 @@ */ #include <linux/io.h> +#include <linux/of.h> + #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <mach/hardware.h> @@ -45,7 +47,10 @@ static int __init ux500_l2x0_init(void) ux500_l2x0_unlock(); /* 64KB way size, 8 way associativity, force WA */ - l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + if (of_have_populated_dt()) + l2x0_of_init(0x3e060000, 0xc0000fff); + else + l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); /* * We can't disable l2 as we are in non secure mode, currently diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 737907537004..ec35f0aa5665 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -223,6 +223,13 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + /*TODO*/ + return -ENOSYS; +} +EXPORT_SYMBOL(clk_set_parent); + static void clk_prcmu_enable(struct clk *clk) { void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE) diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h index 074490705229..d776ada08dbf 100644 --- a/arch/arm/mach-ux500/clock.h +++ b/arch/arm/mach-ux500/clock.h @@ -21,6 +21,7 @@ struct clkops { void (*enable) (struct clk *); void (*disable) (struct clk *); unsigned long (*get_rate) (struct clk *); + int (*set_parent)(struct clk *, struct clk *); }; /** diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index 18aa5c05c69e..bca47f32082f 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -147,13 +147,13 @@ static resource_size_t __initdata db5500_gpio_base[] = { U5500_GPIOBANK7_BASE, }; -static void __init db5500_add_gpios(void) +static void __init db5500_add_gpios(struct device *parent) { struct nmk_gpio_platform_data pdata = { /* No custom data yet */ }; - dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base), + dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base), IRQ_DB5500_GPIO0, &pdata); } @@ -212,14 +212,36 @@ static int usb_db5500_tx_dma_cfg[] = { DB5500_DMA_DEV38_USB_OTG_OEP_8 }; -void __init u5500_init_devices(void) +static const char *db5500_read_soc_id(void) { - db5500_add_gpios(); + return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n"); +} + +static struct device * __init db5500_soc_device_init(void) +{ + const char *soc_id = db5500_read_soc_id(); + + return ux500_soc_device_init(soc_id); +} + +struct device * __init u5500_init_devices(void) +{ + struct device *parent; + int i; + + parent = db5500_soc_device_init(); + + db5500_add_gpios(parent); db5500_pmu_init(); - db5500_dma_init(); - db5500_add_rtc(); - db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); + db5500_dma_init(parent); + db5500_add_rtc(parent); + db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); + + for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++) + db5500_platform_devs[i]->dev.parent = parent; platform_add_devices(db5500_platform_devs, ARRAY_SIZE(db5500_platform_devs)); + + return parent; } diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 7176ee7491ab..9bd8163896cf 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -24,6 +24,7 @@ #include <mach/setup.h> #include <mach/devices.h> #include <mach/usb.h> +#include <mach/db8500-regs.h> #include "devices-db8500.h" #include "ste-dma40-db8500.h" @@ -132,13 +133,13 @@ static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK8_BASE, }; -static void __init db8500_add_gpios(void) +static void __init db8500_add_gpios(struct device *parent) { struct nmk_gpio_platform_data pdata = { .supports_sleepmode = true, }; - dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base), + dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); } @@ -164,17 +165,44 @@ static int usb_db8500_tx_dma_cfg[] = { DB8500_DMA_DEV39_USB_OTG_OEP_8 }; +static const char *db8500_read_soc_id(void) +{ + void __iomem *uid = __io_address(U8500_BB_UID_BASE); + + return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", + readl((u32 *)uid+1), + readl((u32 *)uid+1), readl((u32 *)uid+2), + readl((u32 *)uid+3), readl((u32 *)uid+4)); +} + +static struct device * __init db8500_soc_device_init(void) +{ + const char *soc_id = db8500_read_soc_id(); + + return ux500_soc_device_init(soc_id); +} + /* * This function is called from the board init */ -void __init u8500_init_devices(void) +struct device * __init u8500_init_devices(void) { - db8500_add_rtc(); - db8500_add_gpios(); - db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + struct device *parent; + int i; + + parent = db8500_soc_device_init(); + + db8500_add_rtc(parent); + db8500_add_gpios(parent); + db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + + platform_device_register_data(parent, + "cpufreq-u8500", -1, NULL, 0); + + for (i = 0; i < ARRAY_SIZE(platform_devs); i++) + platform_devs[i]->dev.parent = parent; - platform_device_register_simple("cpufreq-u8500", -1, NULL, 0); platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - return ; + return parent; } diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index f41857494375..d11f3892a27d 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -2,6 +2,7 @@ * Copyright (C) ST-Ericsson SA 2010 * * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson * License terms: GNU General Public License (GPL) version 2 */ @@ -11,10 +12,15 @@ #include <linux/mfd/db8500-prcmu.h> #include <linux/mfd/db5500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/sys_soc.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/of.h> +#include <linux/of_irq.h> #include <asm/hardware/gic.h> #include <asm/mach/map.h> -#include <asm/localtimer.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -24,6 +30,11 @@ void __iomem *_PRCMU_BASE; +static const struct of_device_id ux500_dt_irq_match[] = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {}, +}; + void __init ux500_init_irq(void) { void __iomem *dist_base; @@ -38,7 +49,12 @@ void __init ux500_init_irq(void) } else ux500_unknown_soc(); - gic_init(0, 29, dist_base, cpu_base); +#ifdef CONFIG_OF + if (of_have_populated_dt()) + of_irq_init(ux500_dt_irq_match); + else +#endif + gic_init(0, 29, dist_base, cpu_base); /* * Init clocks here so that they are available for system timer @@ -50,3 +66,73 @@ void __init ux500_init_irq(void) db8500_prcmu_early_init(); clk_init(); } + +static const char * __init ux500_get_machine(void) +{ + return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber()); +} + +static const char * __init ux500_get_family(void) +{ + return kasprintf(GFP_KERNEL, "ux500"); +} + +static const char * __init ux500_get_revision(void) +{ + unsigned int rev = dbx500_revision(); + + if (rev == 0x01) + return kasprintf(GFP_KERNEL, "%s", "ED"); + else if (rev >= 0xA0) + return kasprintf(GFP_KERNEL, "%d.%d", + (rev >> 4) - 0xA + 1, rev & 0xf); + + return kasprintf(GFP_KERNEL, "%s", "Unknown"); +} + +static ssize_t ux500_get_process(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + if (dbx500_id.process == 0x00) + return sprintf(buf, "Standard\n"); + + return sprintf(buf, "%02xnm\n", dbx500_id.process); +} + +static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr, + const char *soc_id) +{ + soc_dev_attr->soc_id = soc_id; + soc_dev_attr->machine = ux500_get_machine(); + soc_dev_attr->family = ux500_get_family(); + soc_dev_attr->revision = ux500_get_revision(); +} + +struct device_attribute ux500_soc_attr = + __ATTR(process, S_IRUGO, ux500_get_process, NULL); + +struct device * __init ux500_soc_device_init(const char *soc_id) +{ + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return ERR_PTR(-ENOMEM); + + soc_info_populate(soc_dev_attr, soc_id); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr); + return NULL; + } + + parent = soc_device_to_device(soc_dev); + if (!IS_ERR_OR_NULL(parent)) + device_create_file(parent, &ux500_soc_attr); + + return parent; +} diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index c563e5418d80..c5312a4b49f5 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -20,35 +20,31 @@ #include "devices-common.h" struct amba_device * -dbx500_add_amba_device(const char *name, resource_size_t base, - int irq, void *pdata, unsigned int periphid) +dbx500_add_amba_device(struct device *parent, const char *name, + resource_size_t base, int irq, void *pdata, + unsigned int periphid) { struct amba_device *dev; int ret; - dev = kzalloc(sizeof *dev, GFP_KERNEL); + dev = amba_device_alloc(name, base, SZ_4K); if (!dev) return ERR_PTR(-ENOMEM); - dev->dev.init_name = name; - - dev->res.start = base; - dev->res.end = base + SZ_4K - 1; - dev->res.flags = IORESOURCE_MEM; - dev->dma_mask = DMA_BIT_MASK(32); dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dev->irq[0] = irq; - dev->irq[1] = NO_IRQ; dev->periphid = periphid; dev->dev.platform_data = pdata; - ret = amba_device_register(dev, &iomem_resource); + dev->dev.parent = parent; + + ret = amba_device_add(dev, &iomem_resource); if (ret) { - kfree(dev); + amba_device_put(dev); return ERR_PTR(ret); } @@ -56,60 +52,7 @@ dbx500_add_amba_device(const char *name, resource_size_t base, } static struct platform_device * -dbx500_add_platform_device(const char *name, int id, void *pdata, - struct resource *res, int resnum) -{ - struct platform_device *dev; - int ret; - - dev = platform_device_alloc(name, id); - if (!dev) - return ERR_PTR(-ENOMEM); - - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - dev->dev.dma_mask = &dev->dev.coherent_dma_mask; - - ret = platform_device_add_resources(dev, res, resnum); - if (ret) - goto out_free; - - dev->dev.platform_data = pdata; - - ret = platform_device_add(dev); - if (ret) - goto out_free; - - return dev; - -out_free: - platform_device_put(dev); - return ERR_PTR(ret); -} - -struct platform_device * -dbx500_add_platform_device_4k1irq(const char *name, int id, - resource_size_t base, - int irq, void *pdata) -{ - struct resource resources[] = { - [0] = { - .start = base, - .end = base + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - } - }; - - return dbx500_add_platform_device(name, id, pdata, resources, - ARRAY_SIZE(resources)); -} - -static struct platform_device * -dbx500_add_gpio(int id, resource_size_t addr, int irq, +dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq, struct nmk_gpio_platform_data *pdata) { struct resource resources[] = { @@ -125,13 +68,18 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq, } }; - return platform_device_register_resndata(NULL, "gpio", id, - resources, ARRAY_SIZE(resources), - pdata, sizeof(*pdata)); + return platform_device_register_resndata( + parent, + "gpio", + id, + resources, + ARRAY_SIZE(resources), + pdata, + sizeof(*pdata)); } -void dbx500_add_gpios(resource_size_t *base, int num, int irq, - struct nmk_gpio_platform_data *pdata) +void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, + int irq, struct nmk_gpio_platform_data *pdata) { int first = 0; int i; @@ -141,6 +89,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq, pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); pdata->num_gpio = 32; - dbx500_add_gpio(i, base[i], irq, pdata); + dbx500_add_gpio(parent, i, base[i], irq, pdata); } } diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 7825705033bf..39c74ec82add 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -8,80 +8,89 @@ #ifndef __DEVICES_COMMON_H #define __DEVICES_COMMON_H -extern struct amba_device * -dbx500_add_amba_device(const char *name, resource_size_t base, - int irq, void *pdata, unsigned int periphid); +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/sys_soc.h> +#include <plat/i2c.h> -extern struct platform_device * -dbx500_add_platform_device_4k1irq(const char *name, int id, - resource_size_t base, - int irq, void *pdata); +extern struct amba_device * +dbx500_add_amba_device(struct device *parent, const char *name, + resource_size_t base, int irq, void *pdata, + unsigned int periphid); struct spi_master_cntlr; static inline struct amba_device * -dbx500_add_msp_spi(const char *name, resource_size_t base, int irq, +dbx500_add_msp_spi(struct device *parent, const char *name, + resource_size_t base, int irq, struct spi_master_cntlr *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(parent, name, base, irq, + pdata, 0); } static inline struct amba_device * -dbx500_add_spi(const char *name, resource_size_t base, int irq, - struct spi_master_cntlr *pdata, +dbx500_add_spi(struct device *parent, const char *name, resource_size_t base, + int irq, struct spi_master_cntlr *pdata, u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, periphid); + return dbx500_add_amba_device(parent, name, base, irq, + pdata, periphid); } struct mmci_platform_data; static inline struct amba_device * -dbx500_add_sdi(const char *name, resource_size_t base, int irq, - struct mmci_platform_data *pdata, - u32 periphid) +dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base, + int irq, struct mmci_platform_data *pdata, u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, periphid); + return dbx500_add_amba_device(parent, name, base, irq, + pdata, periphid); } struct amba_pl011_data; static inline struct amba_device * -dbx500_add_uart(const char *name, resource_size_t base, int irq, - struct amba_pl011_data *pdata) +dbx500_add_uart(struct device *parent, const char *name, resource_size_t base, + int irq, struct amba_pl011_data *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(parent, name, base, irq, pdata, 0); } struct nmk_i2c_controller; static inline struct platform_device * -dbx500_add_i2c(int id, resource_size_t base, int irq, - struct nmk_i2c_controller *pdata) -{ - return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq, - pdata); -} - -struct msp_i2s_platform_data; - -static inline struct platform_device * -dbx500_add_msp_i2s(int id, resource_size_t base, int irq, - struct msp_i2s_platform_data *pdata) +dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq, + struct nmk_i2c_controller *data) { - return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq, - pdata); + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_4K), + DEFINE_RES_IRQ(irq), + }; + + struct platform_device_info pdevinfo = { + .parent = parent, + .name = "nmk-i2c", + .id = id, + .res = res, + .num_res = ARRAY_SIZE(res), + .data = data, + .size_data = sizeof(*data), + .dma_mask = DMA_BIT_MASK(32), + }; + + return platform_device_register_full(&pdevinfo); } static inline struct amba_device * -dbx500_add_rtc(resource_size_t base, int irq) +dbx500_add_rtc(struct device *parent, resource_size_t base, int irq) { - return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0); + return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0); } struct nmk_gpio_platform_data; -void dbx500_add_gpios(resource_size_t *base, int num, int irq, - struct nmk_gpio_platform_data *pdata); +void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, + int irq, struct nmk_gpio_platform_data *pdata); #endif diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h index 0c4bccd02b90..e70955502c35 100644 --- a/arch/arm/mach-ux500/devices-db5500.h +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -10,70 +10,90 @@ #include "devices-common.h" -#define db5500_add_i2c1(pdata) \ - dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) -#define db5500_add_i2c2(pdata) \ - dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) -#define db5500_add_i2c3(pdata) \ - dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) +#define db5500_add_i2c1(parent, pdata) \ + dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) +#define db5500_add_i2c2(parent, pdata) \ + dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) +#define db5500_add_i2c3(parent, pdata) \ + dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) -#define db5500_add_msp0_i2s(pdata) \ - dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_i2s(pdata) \ - dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_i2s(pdata) \ - dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata) +#define db5500_add_msp0_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ + IRQ_DB5500_MSP0, pdata) +#define db5500_add_msp1_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ + IRQ_DB5500_MSP1, pdata) +#define db5500_add_msp2_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ + IRQ_DB5500_MSP2, pdata) -#define db5500_add_msp0_spi(pdata) \ - dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_spi(pdata) \ - dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_spi(pdata) \ - dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata) +#define db5500_add_msp0_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ + IRQ_DB5500_MSP0, pdata) +#define db5500_add_msp1_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ + IRQ_DB5500_MSP1, pdata) +#define db5500_add_msp2_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ + IRQ_DB5500_MSP2, pdata) -#define db5500_add_rtc() \ - dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC); +#define db5500_add_rtc(parent) \ + dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC); -#define db5500_add_usb(rx_cfg, tx_cfg) \ - ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) +#define db5500_add_usb(parent, rx_cfg, tx_cfg) \ + ux500_add_usb(parent, U5500_USBOTG_BASE, \ + IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) -#define db5500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \ +#define db5500_add_sdi0(parent, pdata) \ + dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \ + IRQ_DB5500_SDMMC0, pdata, \ 0x10480180) -#define db5500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \ +#define db5500_add_sdi1(parent, pdata) \ + dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \ + IRQ_DB5500_SDMMC1, pdata, \ 0x10480180) -#define db5500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \ +#define db5500_add_sdi2(parent, pdata) \ + dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \ + IRQ_DB5500_SDMMC2, pdata \ 0x10480180) -#define db5500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \ +#define db5500_add_sdi3(parent, pdata) \ + dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \ + IRQ_DB5500_SDMMC3, pdata \ 0x10480180) -#define db5500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \ +#define db5500_add_sdi4(parent, pdata) \ + dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \ + IRQ_DB5500_SDMMC4, pdata \ 0x10480180) /* This one has a bad peripheral ID in the U5500 silicon */ -#define db5500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \ +#define db5500_add_spi0(parent, pdata) \ + dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \ + IRQ_DB5500_SPI0, pdata, \ 0x10080023) -#define db5500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \ +#define db5500_add_spi1(parent, pdata) \ + dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \ + IRQ_DB5500_SPI1, pdata, \ 0x10080023) -#define db5500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \ +#define db5500_add_spi2(parent, pdata) \ + dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \ + IRQ_DB5500_SPI2, pdata \ 0x10080023) -#define db5500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \ +#define db5500_add_spi3(parent, pdata) \ + dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \ + IRQ_DB5500_SPI3, pdata \ 0x10080023) -#define db5500_add_uart0(plat) \ - dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat) -#define db5500_add_uart1(plat) \ - dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat) -#define db5500_add_uart2(plat) \ - dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat) -#define db5500_add_uart3(plat) \ - dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat) +#define db5500_add_uart0(parent, plat) \ + dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \ + IRQ_DB5500_UART0, plat) +#define db5500_add_uart1(parent, plat) \ + dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \ + IRQ_DB5500_UART1, plat) +#define db5500_add_uart2(parent, plat) \ + dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \ + IRQ_DB5500_UART2, plat) +#define db5500_add_uart3(parent, plat) \ + dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \ + IRQ_DB5500_UART3, plat) #endif diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index a7c6cdc9b11e..6e66d3777ed5 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -101,6 +101,9 @@ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV41_SD_MM3_TX] = -1, [DB8500_DMA_DEV42_SD_MM4_TX] = -1, [DB8500_DMA_DEV43_SD_MM5_TX] = -1, + [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, }; /* Mapping between source event lines and physical device address */ @@ -133,6 +136,9 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV41_SD_MM3_RX] = -1, [DB8500_DMA_DEV42_SD_MM4_RX] = -1, [DB8500_DMA_DEV43_SD_MM5_RX] = -1, + [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, }; /* Reserved event lines for memcpy only */ diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index cbd4a9ae8109..9fd93e9da529 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -14,88 +14,114 @@ struct ske_keypad_platform_data; struct pl022_ssp_controller; static inline struct platform_device * -db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata) +db8500_add_ske_keypad(struct device *parent, + struct ske_keypad_platform_data *pdata, + size_t size) { - return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1, - U8500_SKE_BASE, - IRQ_DB8500_KB, pdata); + struct resource resources[] = { + DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K), + DEFINE_RES_IRQ(IRQ_DB8500_KB), + }; + + return platform_device_register_resndata(parent, "nmk-ske-keypad", -1, + resources, 2, pdata, size); } static inline struct amba_device * -db8500_add_ssp(const char *name, resource_size_t base, int irq, - struct pl022_ssp_controller *pdata) +db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, + int irq, struct pl022_ssp_controller *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(parent, name, base, irq, pdata, 0); } -#define db8500_add_i2c0(pdata) \ - dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) -#define db8500_add_i2c1(pdata) \ - dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) -#define db8500_add_i2c2(pdata) \ - dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) -#define db8500_add_i2c3(pdata) \ - dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) -#define db8500_add_i2c4(pdata) \ - dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) - -#define db8500_add_msp0_i2s(pdata) \ - dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_i2s(pdata) \ - dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_i2s(pdata) \ - dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_i2s(pdata) \ - dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) - -#define db8500_add_msp0_spi(pdata) \ - dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_spi(pdata) \ - dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_spi(pdata) \ - dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_spi(pdata) \ - dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) - -#define db8500_add_rtc() \ - dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC); - -#define db8500_add_usb(rx_cfg, tx_cfg) \ - ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) - -#define db8500_add_sdi0(pdata, pid) \ - dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid) -#define db8500_add_sdi1(pdata, pid) \ - dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid) -#define db8500_add_sdi2(pdata, pid) \ - dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid) -#define db8500_add_sdi3(pdata, pid) \ - dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid) -#define db8500_add_sdi4(pdata, pid) \ - dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid) -#define db8500_add_sdi5(pdata, pid) \ - dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid) - -#define db8500_add_ssp0(pdata) \ - db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata) -#define db8500_add_ssp1(pdata) \ - db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata) - -#define db8500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0) -#define db8500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0) -#define db8500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0) -#define db8500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0) - -#define db8500_add_uart0(pdata) \ - dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata) -#define db8500_add_uart1(pdata) \ - dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata) -#define db8500_add_uart2(pdata) \ - dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata) +#define db8500_add_i2c0(parent, pdata) \ + dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) +#define db8500_add_i2c1(parent, pdata) \ + dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) +#define db8500_add_i2c2(parent, pdata) \ + dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) +#define db8500_add_i2c3(parent, pdata) \ + dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) +#define db8500_add_i2c4(parent, pdata) \ + dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) + +#define db8500_add_msp0_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) +#define db8500_add_msp1_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) +#define db8500_add_msp2_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) +#define db8500_add_msp3_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) + +#define db8500_add_msp0_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \ + IRQ_DB8500_MSP0, pdata) +#define db8500_add_msp1_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \ + IRQ_DB8500_MSP1, pdata) +#define db8500_add_msp2_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \ + IRQ_DB8500_MSP2, pdata) +#define db8500_add_msp3_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \ + IRQ_DB8500_MSP1, pdata) + +#define db8500_add_rtc(parent) \ + dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC); + +#define db8500_add_usb(parent, rx_cfg, tx_cfg) \ + ux500_add_usb(parent, U8500_USBOTG_BASE, \ + IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) + +#define db8500_add_sdi0(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \ + IRQ_DB8500_SDMMC0, pdata, pid) +#define db8500_add_sdi1(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \ + IRQ_DB8500_SDMMC1, pdata, pid) +#define db8500_add_sdi2(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \ + IRQ_DB8500_SDMMC2, pdata, pid) +#define db8500_add_sdi3(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \ + IRQ_DB8500_SDMMC3, pdata, pid) +#define db8500_add_sdi4(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \ + IRQ_DB8500_SDMMC4, pdata, pid) +#define db8500_add_sdi5(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \ + IRQ_DB8500_SDMMC5, pdata, pid) + +#define db8500_add_ssp0(parent, pdata) \ + db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \ + IRQ_DB8500_SSP0, pdata) +#define db8500_add_ssp1(parent, pdata) \ + db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \ + IRQ_DB8500_SSP1, pdata) + +#define db8500_add_spi0(parent, pdata) \ + dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \ + IRQ_DB8500_SPI0, pdata, 0) +#define db8500_add_spi1(parent, pdata) \ + dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \ + IRQ_DB8500_SPI1, pdata, 0) +#define db8500_add_spi2(parent, pdata) \ + dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \ + IRQ_DB8500_SPI2, pdata, 0) +#define db8500_add_spi3(parent, pdata) \ + dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \ + IRQ_DB8500_SPI3, pdata, 0) + +#define db8500_add_uart0(parent, pdata) \ + dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \ + IRQ_DB8500_UART0, pdata) +#define db8500_add_uart1(parent, pdata) \ + dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \ + IRQ_DB8500_UART1, pdata) +#define db8500_add_uart2(parent, pdata) \ + dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \ + IRQ_DB8500_UART2, pdata) #endif diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c index 1cfab68ae417..41e9470fa0e6 100644 --- a/arch/arm/mach-ux500/dma-db5500.c +++ b/arch/arm/mach-ux500/dma-db5500.c @@ -125,10 +125,11 @@ static struct platform_device dma40_device = { .resource = dma40_resources }; -void __init db5500_dma_init(void) +void __init db5500_dma_init(struct device *parent) { int ret; + dma40_device.dev.parent = parent; ret = platform_device_register(&dma40_device); if (ret) dev_err(&dma40_device.dev, "unable to register device: %d\n", ret); diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 80e10f50282e..9ec20b96d8f2 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -161,4 +161,7 @@ #define U8500_MODEM_BASE 0xe000000 #define U8500_APE_BASE 0x6000000 +/* SoC identification number information */ +#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) + #endif diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S deleted file mode 100644 index e16299e1020a..000000000000 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Low-level IRQ helper macros for U8500 platforms - * - * Copyright (C) 2009 ST-Ericsson. - * - * This file is a copy of ARM Realview platform. - * -just satisfied checkpatch script. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index b6ba26a1367d..d93d6dbef25b 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -30,6 +30,8 @@ #include <mach/db8500-regs.h> #include <mach/db5500-regs.h> +#define MSP_TX_RX_REG_OFFSET 0 + #ifndef __ASSEMBLY__ #include <mach/id.h> diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index d2d4131435a6..7d34c52798b5 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -13,7 +13,7 @@ #define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START #define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ - + AB8500_NR_IRQS) + + AB8500_MAX_NR_IRQS) /* TC35892 */ #define TC35892_NR_INTERNAL_IRQS 8 diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 9db68d264c5f..c23a6b5f0c4e 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -43,7 +43,7 @@ /* This will be overridden by board-specific irq headers */ #define IRQ_BOARD_END IRQ_BOARD_START -#ifdef CONFIG_MACH_U8500 +#ifdef CONFIG_MACH_MOP500 #include <mach/irqs-board-mop500.h> #endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index a7d363fdb4cd..3dc00ffa7bfa 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -18,17 +18,16 @@ void __init ux500_map_io(void); extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -extern void __init u5500_init_devices(void); -extern void __init u8500_init_devices(void); +extern struct device * __init u5500_init_devices(void); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); -extern void __init u5500_sdi_init(void); +extern void __init u5500_sdi_init(struct device *parent); -extern void __init db5500_dma_init(void); +extern void __init db5500_dma_init(struct device *parent); -/* We re-use nomadik_timer for this platform */ -extern void nmdk_timer_init(void); +extern struct device *ux500_soc_device_init(const char *soc_id); struct amba_device; extern void __init amba_add_devices(struct amba_device *devs[], int num); diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h deleted file mode 100644 index 258e5c919c24..000000000000 --- a/arch/arm/mach-ux500/include/mach/system.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h index d3739d418813..4c1cc50a595a 100644 --- a/arch/arm/mach-ux500/include/mach/usb.h +++ b/arch/arm/mach-ux500/include/mach/usb.h @@ -20,6 +20,6 @@ struct ux500_musb_board_data { bool (*dma_filter)(struct dma_chan *chan, void *filter_param); }; -void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, - int *dma_tx_cfg); +void ux500_add_usb(struct device *parent, resource_size_t base, + int irq, int *dma_rx_cfg, int *dma_tx_cfg); #endif diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c deleted file mode 100644 index 5ba113309a0b..000000000000 --- a/arch/arm/mach-ux500/localtimer.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2008-2009 ST-Ericsson - * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> - * - * This file is heavily based on relaview platform, almost a copy. - * - * Copyright (C) 2002 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/clockchips.h> - -#include <asm/irq.h> -#include <asm/smp_twd.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); - return 0; -} diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index aea467d04ff7..d37df98b5c32 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -7,29 +7,52 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/of.h> -#include <asm/localtimer.h> +#include <asm/smp_twd.h> #include <plat/mtu.h> #include <mach/setup.h> #include <mach/hardware.h> +#include <mach/irqs.h> + +#ifdef CONFIG_HAVE_ARM_TWD +static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer, + U5500_TWD_BASE, IRQ_LOCALTIMER); +static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, + U8500_TWD_BASE, IRQ_LOCALTIMER); + +static void __init ux500_twd_init(void) +{ + struct twd_local_timer *twd_local_timer; + int err; + + twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer : + &u8500_twd_local_timer; + + if (of_have_populated_dt()) + twd_local_timer_of_register(); + else { + err = twd_local_timer_register(twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); + } +} +#else +#define ux500_twd_init() do { } while(0) +#endif static void __init ux500_timer_init(void) { + void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; if (cpu_is_u5500()) { -#ifdef CONFIG_LOCAL_TIMERS - twd_base = __io_address(U5500_TWD_BASE); -#endif - mtu_base = __io_address(U5500_MTU0_BASE); + mtu_timer_base = __io_address(U5500_MTU0_BASE); prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE); } else if (cpu_is_u8500()) { -#ifdef CONFIG_LOCAL_TIMERS - twd_base = __io_address(U8500_TWD_BASE); -#endif - mtu_base = __io_address(U8500_MTU0_BASE); + mtu_timer_base = __io_address(U8500_MTU0_BASE); prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); } else { ux500_unknown_soc(); @@ -52,8 +75,9 @@ static void __init ux500_timer_init(void) * */ - nmdk_timer_init(); + nmdk_timer_init(mtu_timer_base); clksrc_dbx500_prcmu_init(prcmu_timer_base); + ux500_twd_init(); } static void ux500_timer_reset(void) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 9f9e1c203061..a74af389bc63 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -7,6 +7,7 @@ #include <linux/platform_device.h> #include <linux/usb/musb.h> #include <linux/dma-mapping.h> + #include <plat/ste_dma40.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -140,8 +141,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type) musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx]; } -void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, - int *dma_tx_cfg) +void ux500_add_usb(struct device *parent, resource_size_t base, int irq, + int *dma_rx_cfg, int *dma_tx_cfg) { ux500_musb_device.resource[0].start = base; ux500_musb_device.resource[0].end = base + SZ_64K - 1; @@ -151,5 +152,7 @@ void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, ux500_usb_dma_update_rx_ch_config(dma_rx_cfg); ux500_usb_dma_update_tx_ch_config(dma_tx_cfg); + ux500_musb_device.dev.parent = parent; + platform_device_register(&ux500_musb_device); } diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 008ce22b9a06..6bbd74e950ab 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -36,7 +36,6 @@ #include <linux/clkdev.h> #include <linux/mtd/physmap.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/leds.h> #include <asm/hardware/arm_timer.h> @@ -585,58 +584,58 @@ static struct pl022_ssp_controller ssp0_plat_data = { .num_chipselect = 1, }; -#define AACI_IRQ { IRQ_AACI, NO_IRQ } +#define AACI_IRQ { IRQ_AACI } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } -#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ } +#define KMI0_IRQ { IRQ_SIC_KMI0 } +#define KMI1_IRQ { IRQ_SIC_KMI1 } /* * These devices are connected directly to the multi-layer AHB switch */ -#define SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } -#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } +#define SMC_IRQ { } +#define MPMC_IRQ { } +#define CLCD_IRQ { IRQ_CLCDINT } +#define DMAC_IRQ { IRQ_DMAINT } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } -#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } -#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } -#define RTC_IRQ { IRQ_RTCINT, NO_IRQ } +#define SCTL_IRQ { } +#define WATCHDOG_IRQ { IRQ_WDOGINT } +#define GPIO0_IRQ { IRQ_GPIOINT0 } +#define GPIO1_IRQ { IRQ_GPIOINT1 } +#define RTC_IRQ { IRQ_RTCINT } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_SCIINT, NO_IRQ } -#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } -#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } -#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } -#define SSP_IRQ { IRQ_SSPINT, NO_IRQ } +#define SCI_IRQ { IRQ_SCIINT } +#define UART0_IRQ { IRQ_UARTINT0 } +#define UART1_IRQ { IRQ_UARTINT1 } +#define UART2_IRQ { IRQ_UARTINT2 } +#define SSP_IRQ { IRQ_SSPINT } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +APB_DEVICE(aaci, "fpga:04", AACI, NULL); +APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:06", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:07", KMI1, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:00", SMC, NULL); -AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL); -AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); -AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); -AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); -AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); -AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); -AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:00", SMC, NULL); +AHB_DEVICE(mpmc, "dev:10", MPMC, NULL); +AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "dev:30", DMAC, NULL); +APB_DEVICE(sctl, "dev:e0", SCTL, NULL); +APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +APB_DEVICE(rtc, "dev:e8", RTC, NULL); +APB_DEVICE(sci0, "dev:f0", SCI, NULL); +APB_DEVICE(uart0, "dev:f1", UART0, NULL); +APB_DEVICE(uart1, "dev:f2", UART1, NULL); +APB_DEVICE(uart2, "dev:f3", UART2, NULL); +APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index 2ef2f555f315..683e60776a85 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -36,20 +36,10 @@ extern unsigned int mmc_status(struct device *dev); extern struct of_dev_auxdata versatile_auxdata_lookup[]; #endif -#define AMBA_DEVICE(name,busid,base,plat) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = VERSATILE_##base##_BASE, \ - .end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0, \ - .irq = base##_IRQ, \ -} +#define APB_DEVICE(name, busid, base, plat) \ +static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) + +#define AHB_DEVICE(name, busid, base, plat) \ +static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) #endif diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S deleted file mode 100644 index b6f0dbf122ee..000000000000 --- a/arch/arm/mach-versatile/include/mach/entry-macro.S +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Versatile platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h deleted file mode 100644 index f3fa347895f0..000000000000 --- a/arch/arm/mach-versatile/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 90069bce23bc..a6e23f464528 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -24,7 +24,6 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/mach/pci.h> /* @@ -219,9 +218,9 @@ static int __init pci_versatile_setup_resources(struct list_head *resources) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource(resources, &io_mem); - pci_add_resource(resources, &non_mem); - pci_add_resource(resources, &pre_mem); + pci_add_resource_offset(resources, &io_mem, sys->io_offset); + pci_add_resource_offset(resources, &non_mem, sys->mem_offset); + pci_add_resource_offset(resources, &pre_mem, sys->mem_offset); goto out; diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 9581c197500c..19738331bd3d 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -58,28 +58,28 @@ static struct pl061_platform_data gpio3_plat_data = { .irq_base = IRQ_GPIO3_START, }; -#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ } -#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ } +#define UART3_IRQ { IRQ_SIC_UART3 } +#define SCI1_IRQ { IRQ_SIC_SCI3 } #define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B } /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } -#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } +#define GPIO2_IRQ { IRQ_GPIOINT2 } +#define GPIO3_IRQ { IRQ_GPIOINT3 } /* * These devices are connected via the DMA APB bridge */ /* FPGA Primecells */ -AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); -AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL); -AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); +APB_DEVICE(uart3, "fpga:09", UART3, NULL); +APB_DEVICE(sci1, "fpga:0a", SCI1, NULL); +APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); /* DevChip Primecells */ -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); +APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); +APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart3_device, diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 88c3ba151e87..cf8730d35e70 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,14 +1,55 @@ menu "Versatile Express platform type" depends on ARCH_VEXPRESS +config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA + bool + select ARM_ERRATA_720789 + select ARM_ERRATA_751472 + select PL310_ERRATA_753970 if CACHE_PL310 + help + Provides common dependencies for Versatile Express platforms + based on Cortex-A5 and Cortex-A9 processors. In order to + build a working kernel, you must also enable relevant core + tile support or Flattened Device Tree based support options. + config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" + select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA + select ARM_GIC select CPU_V7 + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + +config ARCH_VEXPRESS_DT + bool "Device Tree support for Versatile Express platforms" + select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA select ARM_GIC - select ARM_ERRATA_720789 - select ARM_ERRATA_751472 - select PL310_ERRATA_753970 + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR + select CPU_V7 select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select USE_OF + help + New Versatile Express platforms require Flattened Device Tree to + be passed to the kernel. + + This option enables support for systems using Cortex processor based + ARM core and logic (FPGA) tiles on the Versatile Express motherboard, + for example: + + - CoreTile Express A5x2 (V2P-CA5s) + - CoreTile Express A9x4 (V2P-CA9) + - CoreTile Express A15x2 (V2P-CA15) + - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs + (Soft Macrocell Models) + - Versatile Express RTSMs (Models) + + You must boot using a Flattened Device Tree in order to use these + platforms. The traditional (ATAGs) boot method is not usable on + these boards with this option. + + If your bootloader supports Flattened Device Tree based booting, + say Y here. endmenu diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot index 8630b3d10a4d..909f85ebf5f4 100644 --- a/arch/arm/mach-vexpress/Makefile.boot +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -1,3 +1,9 @@ +# Those numbers are used only by the non-DT V2P-CA9 platform +# The DT-enabled ones require CONFIG_AUTO_ZRELADDR=y zreladdr-y += 0x60008000 params_phys-y := 0x60000100 initrd_phys-y := 0x60800000 + +dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \ + vexpress-v2p-ca9.dtb \ + vexpress-v2p-ca15-tc1.dtb diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f4397159c173..a3a4980770bd 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -1,19 +1,7 @@ -#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000) -#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x)) +/* 2MB large area for motherboard's peripherals static mapping */ +#define V2M_PERIPH 0xf8000000 -#define AMBA_DEVICE(name,busid,base,plat) \ -struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0UL, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = base, \ - .end = base + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0UL, \ - .irq = IRQ_##base, \ - /* .dma = DMA_##base,*/ \ -} +/* Tile's peripherals static mappings should start here */ +#define V2T_PERIPH 0xf8200000 + +void vexpress_dt_smp_map_io(void); diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index b1e87c184e54..c65cc3b462a5 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -30,57 +30,40 @@ #include <plat/clcd.h> -#define V2M_PA_CS7 0x10000000 - static struct map_desc ct_ca9x4_io_desc[] __initdata = { { - .virtual = __MMIO_P2V(CT_CA9X4_MPIC), - .pfn = __phys_to_pfn(CT_CA9X4_MPIC), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = __MMIO_P2V(CT_CA9X4_SP804_TIMER), - .pfn = __phys_to_pfn(CT_CA9X4_SP804_TIMER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = __MMIO_P2V(CT_CA9X4_L2CC), - .pfn = __phys_to_pfn(CT_CA9X4_L2CC), - .length = SZ_4K, - .type = MT_DEVICE, + .virtual = V2T_PERIPH, + .pfn = __phys_to_pfn(CT_CA9X4_MPIC), + .length = SZ_8K, + .type = MT_DEVICE, }, }; static void __init ct_ca9x4_map_io(void) { -#ifdef CONFIG_LOCAL_TIMERS - twd_base = MMIO_P2V(A9_MPCORE_TWD); -#endif iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } -static void __init ct_ca9x4_init_irq(void) +#ifdef CONFIG_HAVE_ARM_TWD +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER); + +static void __init ca9x4_twd_init(void) { - gic_init(0, 29, MMIO_P2V(A9_MPCORE_GIC_DIST), - MMIO_P2V(A9_MPCORE_GIC_CPU)); + int err = twd_local_timer_register(&twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); } +#else +#define ca9x4_twd_init() do {} while(0) +#endif -#if 0 -static void __init ct_ca9x4_timer_init(void) +static void __init ct_ca9x4_init_irq(void) { - writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL); - writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL); - - sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1), "ct-timer1"); - sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0, - "ct-timer0"); + gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K), + ioremap(A9_MPCORE_GIC_CPU, SZ_256)); + ca9x4_twd_init(); } -static struct sys_timer ct_ca9x4_timer = { - .init = ct_ca9x4_timer_init, -}; -#endif - static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) { v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); @@ -109,10 +92,10 @@ static struct clcd_board ct_ca9x4_clcd_data = { .remove = versatile_clcd_remove_dma, }; -static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); -static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL); -static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL); -static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL); +static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); +static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL); +static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL); +static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL); static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { &clcd_device, @@ -201,7 +184,7 @@ static void __init ct_ca9x4_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC); + void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); /* set RAM latencies to 1 cycle for this core tile. */ writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); @@ -217,9 +200,17 @@ static void __init ct_ca9x4_init(void) } #ifdef CONFIG_SMP +static void *ct_ca9x4_scu_base __initdata; + static void __init ct_ca9x4_init_cpu_map(void) { - int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU)); + int i, ncores; + + ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128); + if (WARN_ON(!ct_ca9x4_scu_base)) + return; + + ncores = scu_get_core_count(ct_ca9x4_scu_base); if (ncores > nr_cpu_ids) { pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", @@ -235,7 +226,7 @@ static void __init ct_ca9x4_init_cpu_map(void) static void __init ct_ca9x4_smp_enable(unsigned int max_cpus) { - scu_enable(MMIO_P2V(A9_MPCORE_SCU)); + scu_enable(ct_ca9x4_scu_base); } #endif diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index 3034a4dab4a1..c504a72b94d6 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -14,7 +14,7 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> -#include <asm/system.h> +#include <asm/cp15.h> extern volatile int pen_release; diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h index a34d3d4faae1..84acf8439d4b 100644 --- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -22,9 +22,6 @@ #define CT_CA9X4_SYSWDT (0x1e007000) #define CT_CA9X4_L2CC (0x1e00a000) -#define CT_CA9X4_TIMER0 (CT_CA9X4_SP804_TIMER + 0x000) -#define CT_CA9X4_TIMER1 (CT_CA9X4_SP804_TIMER + 0x020) - #define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000) #define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100) #define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200) @@ -35,7 +32,7 @@ * Interrupts. Those in {} are for AMBA devices */ #define IRQ_CT_CA9X4_CLCDC { 76 } -#define IRQ_CT_CA9X4_DMC { -1 } +#define IRQ_CT_CA9X4_DMC { 0 } #define IRQ_CT_CA9X4_SMC { 77, 78 } #define IRQ_CT_CA9X4_TIMER0 80 #define IRQ_CT_CA9X4_TIMER1 81 diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index fd9e6c7ea49f..fa8224794e0b 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -10,12 +10,34 @@ * published by the Free Software Foundation. */ -#define DEBUG_LL_UART_OFFSET 0x00009000 +#define DEBUG_LL_PHYS_BASE 0x10000000 +#define DEBUG_LL_UART_OFFSET 0x00009000 + +#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000 +#define DEBUG_LL_UART_OFFSET_RS1 0x00090000 + +#define DEBUG_LL_VIRT_BASE 0xf8000000 .macro addruart,rp,rv,tmp - mov \rp, #DEBUG_LL_UART_OFFSET - orr \rv, \rp, #0xf8000000 @ virtual base - orr \rp, \rp, #0x10000000 @ physical base + + @ Make an educated guess regarding the memory map: + @ - the original A9 core tile, which has MPCore peripherals + @ located at 0x1e000000, should use UART at 0x10009000 + @ - all other (RS1 complaint) tiles use UART mapped + @ at 0x1c090000 + mrc p15, 4, \tmp, c15, c0, 0 + cmp \tmp, #0x1e000000 + + @ Original memory map + moveq \rp, #DEBUG_LL_UART_OFFSET + orreq \rv, \rp, #DEBUG_LL_VIRT_BASE + orreq \rp, \rp, #DEBUG_LL_PHYS_BASE + + @ RS1 memory map + movne \rp, #DEBUG_LL_UART_OFFSET_RS1 + orrne \rv, \rp, #DEBUG_LL_VIRT_BASE + orrne \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1 + .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S deleted file mode 100644 index a14f9e62ca92..000000000000 --- a/arch/arm/mach-vexpress/include/mach/entry-macro.S +++ /dev/null @@ -1,5 +0,0 @@ - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h index 7054cbfc9de5..4b10ee7657a6 100644 --- a/arch/arm/mach-vexpress/include/mach/irqs.h +++ b/arch/arm/mach-vexpress/include/mach/irqs.h @@ -1,4 +1,4 @@ #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 -#define NR_IRQS 128 +#define NR_IRQS 256 diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h index 0a3a37518405..31a92890893d 100644 --- a/arch/arm/mach-vexpress/include/mach/motherboard.h +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -39,33 +39,30 @@ #define V2M_CF (V2M_PA_CS7 + 0x0001a000) #define V2M_CLCD (V2M_PA_CS7 + 0x0001f000) -#define V2M_SYS_ID (V2M_SYSREGS + 0x000) -#define V2M_SYS_SW (V2M_SYSREGS + 0x004) -#define V2M_SYS_LED (V2M_SYSREGS + 0x008) -#define V2M_SYS_100HZ (V2M_SYSREGS + 0x024) -#define V2M_SYS_FLAGS (V2M_SYSREGS + 0x030) -#define V2M_SYS_FLAGSSET (V2M_SYSREGS + 0x030) -#define V2M_SYS_FLAGSCLR (V2M_SYSREGS + 0x034) -#define V2M_SYS_NVFLAGS (V2M_SYSREGS + 0x038) -#define V2M_SYS_NVFLAGSSET (V2M_SYSREGS + 0x038) -#define V2M_SYS_NVFLAGSCLR (V2M_SYSREGS + 0x03c) -#define V2M_SYS_MCI (V2M_SYSREGS + 0x048) -#define V2M_SYS_FLASH (V2M_SYSREGS + 0x03c) -#define V2M_SYS_CFGSW (V2M_SYSREGS + 0x058) -#define V2M_SYS_24MHZ (V2M_SYSREGS + 0x05c) -#define V2M_SYS_MISC (V2M_SYSREGS + 0x060) -#define V2M_SYS_DMA (V2M_SYSREGS + 0x064) -#define V2M_SYS_PROCID0 (V2M_SYSREGS + 0x084) -#define V2M_SYS_PROCID1 (V2M_SYSREGS + 0x088) -#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) -#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) -#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) - -#define V2M_TIMER0 (V2M_TIMER01 + 0x000) -#define V2M_TIMER1 (V2M_TIMER01 + 0x020) - -#define V2M_TIMER2 (V2M_TIMER23 + 0x000) -#define V2M_TIMER3 (V2M_TIMER23 + 0x020) +/* + * Offsets from SYSREGS base + */ +#define V2M_SYS_ID 0x000 +#define V2M_SYS_SW 0x004 +#define V2M_SYS_LED 0x008 +#define V2M_SYS_100HZ 0x024 +#define V2M_SYS_FLAGS 0x030 +#define V2M_SYS_FLAGSSET 0x030 +#define V2M_SYS_FLAGSCLR 0x034 +#define V2M_SYS_NVFLAGS 0x038 +#define V2M_SYS_NVFLAGSSET 0x038 +#define V2M_SYS_NVFLAGSCLR 0x03c +#define V2M_SYS_MCI 0x048 +#define V2M_SYS_FLASH 0x03c +#define V2M_SYS_CFGSW 0x058 +#define V2M_SYS_24MHZ 0x05c +#define V2M_SYS_MISC 0x060 +#define V2M_SYS_DMA 0x064 +#define V2M_SYS_PROCID0 0x084 +#define V2M_SYS_PROCID1 0x088 +#define V2M_SYS_CFGDATA 0x0a0 +#define V2M_SYS_CFGCTRL 0x0a4 +#define V2M_SYS_CFGSTAT 0x0a8 /* @@ -117,6 +114,13 @@ int v2m_cfg_write(u32 devfn, u32 data); int v2m_cfg_read(u32 devfn, u32 *data); +void v2m_flags_set(u32 data); + +/* + * Miscellaneous + */ +#define SYS_MISC_MASTERSITE (1 << 14) +#define SYS_PROCIDx_HBI_MASK 0xfff /* * Core tile IDs diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h deleted file mode 100644 index f653a8e265bd..000000000000 --- a/arch/arm/mach-vexpress/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-vexpress/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h index 7972c5748d0e..7dab5596b868 100644 --- a/arch/arm/mach-vexpress/include/mach/uncompress.h +++ b/arch/arm/mach-vexpress/include/mach/uncompress.h @@ -22,7 +22,27 @@ #define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) #define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) -#define get_uart_base() (0x10000000 + 0x00009000) +#define UART_BASE 0x10009000 +#define UART_BASE_RS1 0x1c090000 + +static unsigned long get_uart_base(void) +{ + unsigned long mpcore_periph; + + /* + * Make an educated guess regarding the memory map: + * - the original A9 core tile, which has MPCore peripherals + * located at 0x1e000000, should use UART at 0x10009000 + * - all other (RS1 complaint) tiles use UART mapped + * at 0x1c090000 + */ + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph)); + + if (mpcore_periph == 0x1e000000) + return UART_BASE; + else + return UART_BASE_RS1; +} /* * This does not append a newline diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 124ffb169093..14ba1128ae8d 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -12,21 +12,168 @@ #include <linux/errno.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of_fdt.h> + +#include <asm/smp_scu.h> +#include <asm/hardware/gic.h> +#include <asm/mach/map.h> #include <mach/motherboard.h> -#define V2M_PA_CS7 0x10000000 #include "core.h" extern void versatile_secondary_startup(void); +#if defined(CONFIG_OF) + +static enum { + GENERIC_SCU, + CORTEX_A9_SCU, +} vexpress_dt_scu __initdata = GENERIC_SCU; + +static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = { + .virtual = V2T_PERIPH, + /* .pfn set in vexpress_dt_init_cortex_a9_scu() */ + .length = SZ_128, + .type = MT_DEVICE, +}; + +static void *vexpress_dt_cortex_a9_scu_base __initdata; + +const static char *vexpress_dt_cortex_a9_match[] __initconst = { + "arm,cortex-a5-scu", + "arm,cortex-a9-scu", + NULL +}; + +static int __init vexpress_dt_find_scu(unsigned long node, + const char *uname, int depth, void *data) +{ + if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) { + phys_addr_t phys_addr; + __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL); + + if (WARN_ON(!reg)) + return -EINVAL; + + phys_addr = be32_to_cpup(reg); + vexpress_dt_scu = CORTEX_A9_SCU; + + vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr); + iotable_init(&vexpress_dt_cortex_a9_scu_map, 1); + vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256); + if (WARN_ON(!vexpress_dt_cortex_a9_scu_base)) + return -EFAULT; + } + + return 0; +} + +void __init vexpress_dt_smp_map_io(void) +{ + if (initial_boot_params) + WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL)); +} + +static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname, + int depth, void *data) +{ + static int prev_depth = -1; + static int nr_cpus = -1; + + if (prev_depth > depth && nr_cpus > 0) + return nr_cpus; + + if (nr_cpus < 0 && strcmp(uname, "cpus") == 0) + nr_cpus = 0; + + if (nr_cpus >= 0) { + const char *device_type = of_get_flat_dt_prop(node, + "device_type", NULL); + + if (device_type && strcmp(device_type, "cpu") == 0) + nr_cpus++; + } + + prev_depth = depth; + + return 0; +} + +static void __init vexpress_dt_smp_init_cpus(void) +{ + int ncores = 0, i; + + switch (vexpress_dt_scu) { + case GENERIC_SCU: + ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL); + break; + case CORTEX_A9_SCU: + ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base); + break; + default: + WARN_ON(1); + break; + } + + if (ncores < 2) + return; + + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + + for (i = 0; i < ncores; ++i) + set_cpu_possible(i, true); + + set_smp_cross_call(gic_raise_softirq); +} + +static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) +{ + int i; + + switch (vexpress_dt_scu) { + case GENERIC_SCU: + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + break; + case CORTEX_A9_SCU: + scu_enable(vexpress_dt_cortex_a9_scu_base); + break; + default: + WARN_ON(1); + break; + } +} + +#else + +static void __init vexpress_dt_smp_init_cpus(void) +{ + WARN_ON(1); +} + +void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) +{ + WARN_ON(1); +} + +#endif + /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ void __init smp_init_cpus(void) { - ct_desc->init_cpu_map(); + if (ct_desc) + ct_desc->init_cpu_map(); + else + vexpress_dt_smp_init_cpus(); + } void __init platform_smp_prepare_cpus(unsigned int max_cpus) @@ -35,7 +182,10 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * Initialise the present map, which describes the set of CPUs * actually populated at the present time. */ - ct_desc->smp_enable(max_cpus); + if (ct_desc) + ct_desc->smp_enable(max_cpus); + else + vexpress_dt_smp_prepare_cpus(max_cpus); /* * Write the address of secondary startup into the @@ -43,7 +193,5 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); - writel(virt_to_phys(versatile_secondary_startup), - MMIO_P2V(V2M_SYS_FLAGSSET)); + v2m_flags_set(virt_to_phys(versatile_secondary_startup)); } diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index b4a28ca0e50a..47cdcca5a7e7 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -6,6 +6,10 @@ #include <linux/amba/mmci.h> #include <linux/io.h> #include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/smsc911x.h> @@ -21,6 +25,8 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/arm_timer.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> #include <asm/hardware/timer-sp.h> #include <asm/hardware/sp810.h> #include <asm/hardware/gic.h> @@ -40,29 +46,45 @@ static struct map_desc v2m_io_desc[] __initdata = { { - .virtual = __MMIO_P2V(V2M_PA_CS7), + .virtual = V2M_PERIPH, .pfn = __phys_to_pfn(V2M_PA_CS7), .length = SZ_128K, .type = MT_DEVICE, }, }; -static void __init v2m_timer_init(void) +static void __iomem *v2m_sysreg_base; + +static void __init v2m_sysctl_init(void __iomem *base) { u32 scctrl; + if (WARN_ON(!base)) + return; + /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ - scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL)); + scctrl = readl(base + SCCTRL); scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; - writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL)); + writel(scctrl, base + SCCTRL); +} + +static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) +{ + if (WARN_ON(!base || irq == NO_IRQ)) + return; + + writel(0, base + TIMER_1_BASE + TIMER_CTRL); + writel(0, base + TIMER_2_BASE + TIMER_CTRL); - writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); - writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); + sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1"); + sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0"); +} - sp804_clocksource_init(MMIO_P2V(V2M_TIMER1), "v2m-timer1"); - sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0, - "v2m-timer0"); +static void __init v2m_timer_init(void) +{ + v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); + v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); } static struct sys_timer v2m_timer = { @@ -82,14 +104,14 @@ int v2m_cfg_write(u32 devfn, u32 data) devfn |= SYS_CFG_START | SYS_CFG_WRITE; spin_lock(&v2m_cfg_lock); - val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); - writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT)); + val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); + writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(data, MMIO_P2V(V2M_SYS_CFGDATA)); - writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA); + writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); do { - val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); } while (val == 0); spin_unlock(&v2m_cfg_lock); @@ -103,22 +125,28 @@ int v2m_cfg_read(u32 devfn, u32 *data) devfn |= SYS_CFG_START; spin_lock(&v2m_cfg_lock); - writel(0, MMIO_P2V(V2M_SYS_CFGSTAT)); - writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT); + writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); mb(); do { cpu_relax(); - val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); } while (val == 0); - *data = readl(MMIO_P2V(V2M_SYS_CFGDATA)); + *data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA); spin_unlock(&v2m_cfg_lock); return !!(val & SYS_CFG_ERR); } +void __init v2m_flags_set(u32 data) +{ + writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR); + writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET); +} + static struct resource v2m_pcie_i2c_resource = { .start = V2M_SERIAL_BUS_PCI, @@ -204,7 +232,7 @@ static struct platform_device v2m_usb_device = { static void v2m_flash_set_vpp(struct platform_device *pdev, int on) { - writel(on != 0, MMIO_P2V(V2M_SYS_FLASH)); + writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH); } static struct physmap_flash_data v2m_flash_data = { @@ -258,7 +286,7 @@ static struct platform_device v2m_cf_device = { static unsigned int v2m_mmci_status(struct device *dev) { - return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0); + return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0); } static struct mmci_platform_data v2m_mmci_data = { @@ -266,16 +294,16 @@ static struct mmci_platform_data v2m_mmci_data = { .status = v2m_mmci_status, }; -static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL); -static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data); -static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL); -static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL); -static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL); -static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL); -static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL); -static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL); -static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL); -static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL); +static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL); +static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data); +static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL); +static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL); +static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL); +static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL); +static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL); +static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL); +static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL); +static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL); static struct amba_device *v2m_amba_devs[] __initdata = { &aaci_device, @@ -371,7 +399,7 @@ static void __init v2m_init_early(void) { ct_desc->init_early(); clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); - versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); + versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); } static void v2m_power_off(void) @@ -400,20 +428,23 @@ static void __init v2m_populate_ct_desc(void) u32 current_tile_id; ct_desc = NULL; - current_tile_id = readl(MMIO_P2V(V2M_SYS_PROCID0)) & V2M_CT_ID_MASK; + current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0) + & V2M_CT_ID_MASK; for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i) if (ct_descs[i]->id == current_tile_id) ct_desc = ct_descs[i]; if (!ct_desc) - panic("vexpress: failed to populate core tile description " - "for tile ID 0x%8x\n", current_tile_id); + panic("vexpress: this kernel does not support core tile ID 0x%08x when booting via ATAGs.\n" + "You may need a device tree blob or a different kernel to boot on this board.\n", + current_tile_id); } static void __init v2m_map_io(void) { iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); + v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K); v2m_populate_ct_desc(); ct_desc->map_io(); } @@ -452,3 +483,205 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_machine = v2m_init, .restart = v2m_restart, MACHINE_END + +#if defined(CONFIG_ARCH_VEXPRESS_DT) + +static struct map_desc v2m_rs1_io_desc __initdata = { + .virtual = V2M_PERIPH, + .pfn = __phys_to_pfn(0x1c000000), + .length = SZ_2M, + .type = MT_DEVICE, +}; + +static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname, + int depth, void *data) +{ + const char **map = data; + + if (strcmp(uname, "motherboard") != 0) + return 0; + + *map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL); + + return 1; +} + +void __init v2m_dt_map_io(void) +{ + const char *map = NULL; + + of_scan_flat_dt(v2m_dt_scan_memory_map, &map); + + if (map && strcmp(map, "rs1") == 0) + iotable_init(&v2m_rs1_io_desc, 1); + else + iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); + +#if defined(CONFIG_SMP) + vexpress_dt_smp_map_io(); +#endif +} + +static struct clk_lookup v2m_dt_lookups[] = { + { /* AMBA bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* SP804 timers */ + .dev_id = "sp804", + .con_id = "v2m-timer0", + .clk = &v2m_sp804_clk, + }, { /* SP804 timers */ + .dev_id = "sp804", + .con_id = "v2m-timer1", + .clk = &v2m_sp804_clk, + }, { /* PL180 MMCI */ + .dev_id = "mb:mmci", /* 10005000.mmci */ + .clk = &osc2_clk, + }, { /* PL050 KMI0 */ + .dev_id = "10006000.kmi", + .clk = &osc2_clk, + }, { /* PL050 KMI1 */ + .dev_id = "10007000.kmi", + .clk = &osc2_clk, + }, { /* PL011 UART0 */ + .dev_id = "10009000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART1 */ + .dev_id = "1000a000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART2 */ + .dev_id = "1000b000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART3 */ + .dev_id = "1000c000.uart", + .clk = &osc2_clk, + }, { /* SP805 WDT */ + .dev_id = "1000f000.wdt", + .clk = &v2m_ref_clk, + }, { /* PL111 CLCD */ + .dev_id = "1001f000.clcd", + .clk = &osc1_clk, + }, + /* RS1 memory map */ + { /* PL180 MMCI */ + .dev_id = "mb:mmci", /* 1c050000.mmci */ + .clk = &osc2_clk, + }, { /* PL050 KMI0 */ + .dev_id = "1c060000.kmi", + .clk = &osc2_clk, + }, { /* PL050 KMI1 */ + .dev_id = "1c070000.kmi", + .clk = &osc2_clk, + }, { /* PL011 UART0 */ + .dev_id = "1c090000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART1 */ + .dev_id = "1c0a0000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART2 */ + .dev_id = "1c0b0000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART3 */ + .dev_id = "1c0c0000.uart", + .clk = &osc2_clk, + }, { /* SP805 WDT */ + .dev_id = "1c0f0000.wdt", + .clk = &v2m_ref_clk, + }, { /* PL111 CLCD */ + .dev_id = "1c1f0000.clcd", + .clk = &osc1_clk, + }, +}; + +void __init v2m_dt_init_early(void) +{ + struct device_node *node; + u32 dt_hbi; + + node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg"); + v2m_sysreg_base = of_iomap(node, 0); + if (WARN_ON(!v2m_sysreg_base)) + return; + + /* Confirm board type against DT property, if available */ + if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { + u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); + u32 id = readl(v2m_sysreg_base + (misc & SYS_MISC_MASTERSITE ? + V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); + u32 hbi = id & SYS_PROCIDx_HBI_MASK; + + if (WARN_ON(dt_hbi != hbi)) + pr_warning("vexpress: DT HBI (%x) is not matching " + "hardware (%x)!\n", dt_hbi, hbi); + } + + clkdev_add_table(v2m_dt_lookups, ARRAY_SIZE(v2m_dt_lookups)); + versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); +} + +static struct of_device_id vexpress_irq_match[] __initdata = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {} +}; + +static void __init v2m_dt_init_irq(void) +{ + of_irq_init(vexpress_irq_match); +} + +static void __init v2m_dt_timer_init(void) +{ + struct device_node *node; + const char *path; + int err; + + node = of_find_compatible_node(NULL, NULL, "arm,sp810"); + v2m_sysctl_init(of_iomap(node, 0)); + + err = of_property_read_string(of_aliases, "arm,v2m_timer", &path); + if (WARN_ON(err)) + return; + node = of_find_node_by_path(path); + v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0)); +} + +static struct sys_timer v2m_dt_timer = { + .init = v2m_dt_timer_init, +}; + +static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash", + &v2m_flash_data), + OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data), + /* RS1 memory map */ + OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash", + &v2m_flash_data), + OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data), + {} +}; + +static void __init v2m_dt_init(void) +{ + l2x0_of_init(0x00400000, 0xfe0fffff); + of_platform_populate(NULL, of_default_bus_match_table, + v2m_dt_auxdata_lookup, NULL); + pm_power_off = v2m_power_off; +} + +const static char *v2m_dt_match[] __initconst = { + "arm,vexpress", + NULL, +}; + +DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") + .dt_compat = v2m_dt_match, + .map_io = v2m_dt_map_io, + .init_early = v2m_dt_init_early, + .init_irq = v2m_dt_init_irq, + .timer = &v2m_dt_timer, + .init_machine = v2m_dt_init, + .handle_irq = gic_handle_irq, + .restart = v2m_restart, +MACHINE_END + +#endif diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S index 92684c7eaed3..367d1b55fb9a 100644 --- a/arch/arm/mach-vt8500/include/mach/entry-macro.S +++ b/arch/arm/mach-vt8500/include/mach/entry-macro.S @@ -8,18 +8,12 @@ * warranty of any kind, whether express or implied. */ - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp @ physical 0xd8140000 is virtual 0xf8140000 mov \base, #0xf8000000 orr \base, \base, #0x00140000 .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqnr, [\base] cmp \irqnr, #63 @ may be false positive, check interrupt status diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h index d6c757eaf26b..58fa8010ee61 100644 --- a/arch/arm/mach-vt8500/include/mach/system.h +++ b/arch/arm/mach-vt8500/include/mach/system.h @@ -7,11 +7,6 @@ /* PM Software Reset request register */ #define VT8500_PMSR_VIRT 0xf8130060 -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { writel(1, VT8500_PMSR_VIRT); diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 9a0661992909..9e4dd8b63c4a 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -28,6 +28,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <mach/hardware.h> #include <mach/regs-serial.h> diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 78110befb7a9..db82568a998a 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -530,6 +530,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = { void __init nuc900_board_init(struct platform_device **device, int size) { + disable_hlt(); platform_add_devices(device, size); platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); spi_register_board_info(nuc900_spi_board_info, diff --git a/arch/arm/mach-w90x900/include/mach/entry-macro.S b/arch/arm/mach-w90x900/include/mach/entry-macro.S index d39aca5be9ee..e286daca6827 100644 --- a/arch/arm/mach-w90x900/include/mach/entry-macro.S +++ b/arch/arm/mach-w90x900/include/mach/entry-macro.S @@ -15,9 +15,6 @@ .macro get_irqnr_preamble, base, tmp .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp mov \base, #AIC_BA @@ -27,8 +24,3 @@ cmp \irqnr, #0 .endm - - /* currently don't need an disable_fiq macro */ - - .macro disable_fiq - .endm diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h deleted file mode 100644 index 2aaeb9311619..000000000000 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/system.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -static void arch_idle(void) -{ -} diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S deleted file mode 100644 index d621fb732569..000000000000 --- a/arch/arm/mach-zynq/include/mach/entry-macro.S +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-zynq/include/mach/entry-macro.S - * - * Low-level IRQ helper macros - * - * Copyright (C) 2011 Xilinx - * - * based on arch/plat-mxc/include/mach/entry-macro.S - * - * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h deleted file mode 100644 index 8e88e0b8d2ba..000000000000 --- a/arch/arm/mach-zynq/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/system.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_SYSTEM_H__ -#define __MACH_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index caf14dc059e5..9107231aacc5 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -22,7 +22,8 @@ #include <linux/sched.h> #include <linux/uaccess.h> -#include <asm/system.h> +#include <asm/cp15.h> +#include <asm/system_info.h> #include <asm/unaligned.h> #include "fault.h" diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index e0b0e7a4ec68..dd3d59122cc3 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/highmem.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <plat/cache-feroceon-l2.h> /* diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c index 50868651890f..1fbca05fe906 100644 --- a/arch/arm/mm/cache-tauros2.c +++ b/arch/arm/mm/cache-tauros2.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/hardware/cache-tauros2.h> diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index 5a32020471e3..6c3edeb66e74 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -18,7 +18,7 @@ */ #include <linux/init.h> #include <linux/highmem.h> -#include <asm/system.h> +#include <asm/cp15.h> #include <asm/cputype.h> #include <asm/cacheflush.h> diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index bb7eac381a8e..5bdff5c3e6cb 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -21,8 +21,9 @@ #include <linux/perf_event.h> #include <asm/exception.h> -#include <asm/system.h> #include <asm/pgtable.h> +#include <asm/system_misc.h> +#include <asm/system_info.h> #include <asm/tlbflush.h> #include "fault.h" diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 1a8d4aa821be..062d61a1f87d 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -16,7 +16,6 @@ #include <asm/cachetype.h> #include <asm/highmem.h> #include <asm/smp_plat.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include "mm.h" diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index feacf4c76712..ab88ed4f8e08 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -5,6 +5,7 @@ #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/sections.h> +#include <asm/system_info.h> pgd_t *idmap_pgd; diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c index e62956e12030..4614208369f1 100644 --- a/arch/arm/mm/iomap.c +++ b/arch/arm/mm/iomap.c @@ -32,9 +32,6 @@ EXPORT_SYMBOL(pcibios_min_io); unsigned long pcibios_min_mem = 0x01000000; EXPORT_SYMBOL(pcibios_min_mem); -unsigned int pci_flags = PCI_REASSIGN_ALL_RSRC; -EXPORT_SYMBOL(pci_flags); - void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { if ((unsigned long)addr >= VMALLOC_START && diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 80632e8d7538..6780b49f2c69 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -26,12 +26,14 @@ #include <linux/vmalloc.h> #include <linux/io.h> +#include <asm/cp15.h> #include <asm/cputype.h> #include <asm/cacheflush.h> #include <asm/mmu_context.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> #include <asm/sizes.h> +#include <asm/system_info.h> #include <asm/mach/map.h> #include "mm.h" diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 94c5a0c94f5e..cd439c1dd506 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -17,6 +17,7 @@ #include <linux/fs.h> #include <linux/vmalloc.h> +#include <asm/cp15.h> #include <asm/cputype.h> #include <asm/sections.h> #include <asm/cachetype.h> @@ -25,6 +26,7 @@ #include <asm/smp_plat.h> #include <asm/tlb.h> #include <asm/highmem.h> +#include <asm/system_info.h> #include <asm/traps.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index a3e78ccabd65..0acb089d0f70 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -12,6 +12,7 @@ #include <linux/highmem.h> #include <linux/slab.h> +#include <asm/cp15.h> #include <asm/pgalloc.h> #include <asm/page.h> #include <asm/tlbflush.h> diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 272558a133a3..d217e9795d74 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -22,7 +22,6 @@ #include <asm/pgtable.h> #include <asm/page.h> #include <asm/ptrace.h> -#include <asm/system.h> #include "proc-macros.S" diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c index cc60acde84d9..2782ebcc2ed3 100644 --- a/arch/arm/nwfpe/fpa11.c +++ b/arch/arm/nwfpe/fpa11.c @@ -28,7 +28,6 @@ #include <linux/compiler.h> #include <linux/string.h> -#include <asm/system.h> /* Reset the FPA11 chip. Called to initialize and reset the emulator. */ static void resetFPA11(void) diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c index 4efe392859ee..88215ad031a2 100644 --- a/arch/arm/plat-iop/i2c.c +++ b/arch/arm/plat-iop/i2c.c @@ -23,7 +23,6 @@ #include <asm/page.h> #include <asm/mach/map.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/memory.h> #include <mach/hardware.h> #include <asm/hardware/iop3xx.h> diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index f4d40a27111e..0da42058a20f 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -20,7 +20,6 @@ #include <linux/io.h> #include <asm/irq.h> #include <asm/signal.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach/pci.h> #include <asm/hardware/iop3xx.h> @@ -215,8 +214,8 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0; sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR; - pci_add_resource(&sys->resources, &res[0]); - pci_add_resource(&sys->resources, &res[1]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/plat-iop/restart.c b/arch/arm/plat-iop/restart.c index 6a85a0c502e6..33fa699a4d28 100644 --- a/arch/arm/plat-iop/restart.c +++ b/arch/arm/plat-iop/restart.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ #include <asm/hardware/iop3xx.h> +#include <asm/system_misc.h> #include <mach/hardware.h> void iop3xx_restart(char mode, const char *cmd) diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index dcebb1230f7f..c722f9ce6918 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -88,12 +88,6 @@ config IMX_HAVE_IOMUX_V1 config ARCH_MXC_IOMUX_V3 bool -config ARCH_MXC_AUDMUX_V1 - bool - -config ARCH_MXC_AUDMUX_V2 - bool - config IRAM_ALLOC bool select GENERIC_ALLOCATOR diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 076db84f3e31..e81290c27c65 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -14,8 +14,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o -obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o -obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o ifdef CONFIG_SND_IMX_SOC diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c deleted file mode 100644 index 1180bef7664b..000000000000 --- a/arch/arm/plat-mxc/audmux-v1.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * Initial development of this code was funded by - * Phytec Messtechnik GmbH, http://www.phytec.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <mach/audmux.h> -#include <mach/hardware.h> - -static void __iomem *audmux_base; - -static unsigned char port_mapping[] = { - 0x0, 0x4, 0x8, 0x10, 0x14, 0x1c, -}; - -int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr) -{ - if (!audmux_base) { - printk("%s: not configured\n", __func__); - return -ENOSYS; - } - - if (port >= ARRAY_SIZE(port_mapping)) - return -EINVAL; - - writel(pcr, audmux_base + port_mapping[port]); - - return 0; -} -EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port); - -static int mxc_audmux_v1_init(void) -{ -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) - audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR); - else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR); - else -#endif - (void)0; - - return 0; -} - -postcore_initcall(mxc_audmux_v1_init); diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c deleted file mode 100644 index 8cced35009bd..000000000000 --- a/arch/arm/plat-mxc/audmux-v2.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * Initial development of this code was funded by - * Phytec Messtechnik GmbH, http://www.phytec.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/debugfs.h> -#include <linux/slab.h> -#include <mach/audmux.h> -#include <mach/hardware.h> - -static struct clk *audmux_clk; -static void __iomem *audmux_base; - -#define MXC_AUDMUX_V2_PTCR(x) ((x) * 8) -#define MXC_AUDMUX_V2_PDCR(x) ((x) * 8 + 4) - -#ifdef CONFIG_DEBUG_FS -static struct dentry *audmux_debugfs_root; - -static int audmux_open_file(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -/* There is an annoying discontinuity in the SSI numbering with regard - * to the Linux number of the devices */ -static const char *audmux_port_string(int port) -{ - switch (port) { - case MX31_AUDMUX_PORT1_SSI0: - return "imx-ssi.0"; - case MX31_AUDMUX_PORT2_SSI1: - return "imx-ssi.1"; - case MX31_AUDMUX_PORT3_SSI_PINS_3: - return "SSI3"; - case MX31_AUDMUX_PORT4_SSI_PINS_4: - return "SSI4"; - case MX31_AUDMUX_PORT5_SSI_PINS_5: - return "SSI5"; - case MX31_AUDMUX_PORT6_SSI_PINS_6: - return "SSI6"; - default: - return "UNKNOWN"; - } -} - -static ssize_t audmux_read_file(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - ssize_t ret; - char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); - int port = (int)file->private_data; - u32 pdcr, ptcr; - - if (!buf) - return -ENOMEM; - - if (audmux_clk) - clk_enable(audmux_clk); - - ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port)); - pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port)); - - if (audmux_clk) - clk_disable(audmux_clk); - - ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n", - pdcr, ptcr); - - if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxFS output from %s, ", - audmux_port_string((ptcr >> 27) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxFS input, "); - - if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxClk output from %s", - audmux_port_string((ptcr >> 22) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxClk input"); - - ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n"); - - if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) { - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "Port is symmetric"); - } else { - if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxFS output from %s, ", - audmux_port_string((ptcr >> 17) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxFS input, "); - - if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxClk output from %s", - audmux_port_string((ptcr >> 12) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxClk input"); - } - - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "\nData received from %s\n", - audmux_port_string((pdcr >> 13) & 0x7)); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); - - kfree(buf); - - return ret; -} - -static const struct file_operations audmux_debugfs_fops = { - .open = audmux_open_file, - .read = audmux_read_file, - .llseek = default_llseek, -}; - -static void audmux_debugfs_init(void) -{ - int i; - char buf[20]; - - audmux_debugfs_root = debugfs_create_dir("audmux", NULL); - if (!audmux_debugfs_root) { - pr_warning("Failed to create AUDMUX debugfs root\n"); - return; - } - - for (i = 1; i < 8; i++) { - snprintf(buf, sizeof(buf), "ssi%d", i); - if (!debugfs_create_file(buf, 0444, audmux_debugfs_root, - (void *)i, &audmux_debugfs_fops)) - pr_warning("Failed to create AUDMUX port %d debugfs file\n", - i); - } -} -#else -static inline void audmux_debugfs_init(void) -{ -} -#endif - -int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, - unsigned int pdcr) -{ - if (!audmux_base) - return -ENOSYS; - - if (audmux_clk) - clk_enable(audmux_clk); - - writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port)); - writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port)); - - if (audmux_clk) - clk_disable(audmux_clk); - - return 0; -} -EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port); - -static int mxc_audmux_v2_init(void) -{ - int ret; - if (cpu_is_mx51()) { - audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR); - } else if (cpu_is_mx31()) { - audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); - } else if (cpu_is_mx35()) { - audmux_clk = clk_get(NULL, "audmux"); - if (IS_ERR(audmux_clk)) { - ret = PTR_ERR(audmux_clk); - printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, - ret); - return ret; - } - audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); - } else if (cpu_is_mx25()) { - audmux_clk = clk_get(NULL, "audmux"); - if (IS_ERR(audmux_clk)) { - ret = PTR_ERR(audmux_clk); - printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, - ret); - return ret; - } - audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR); - } - - audmux_debugfs_init(); - - return 0; -} - -postcore_initcall(mxc_audmux_v2_init); diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 55f15699a383..689f81f9593b 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -60,7 +60,7 @@ static int avic_irq_set_priority(unsigned char irq, unsigned char prio) unsigned int mask = 0x0F << irq % 8 * 4; if (irq >= AVIC_NUM_IRQS) - return -EINVAL;; + return -EINVAL; temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c index f5b7e0fa237f..220dd6f93126 100644 --- a/arch/arm/plat-mxc/cpu.c +++ b/arch/arm/plat-mxc/cpu.c @@ -1,5 +1,6 @@ #include <linux/module.h> +#include <linux/io.h> #include <mach/hardware.h> unsigned int __mxc_cpu_type; @@ -18,3 +19,26 @@ void imx_print_silicon_rev(const char *cpu, int srev) pr_info("CPU identified as %s, silicon rev %d.%d\n", cpu, (srev >> 4) & 0xf, srev & 0xf); } + +void __init imx_set_aips(void __iomem *base) +{ + unsigned int reg; +/* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + __raw_writel(0x77777777, base + 0x0); + __raw_writel(0x77777777, base + 0x4); + +/* + * Set all OPACRx to be non-bufferable, to not require + * supervisor privilege level for access, allow for + * write access and untrusted master access. + */ + __raw_writel(0x0, base + 0x40); + __raw_writel(0x0, base + 0x44); + __raw_writel(0x0, base + 0x48); + __raw_writel(0x0, base + 0x4C); + reg = __raw_readl(base + 0x50) & 0x00FFFFFF; + __raw_writel(reg, base + 0x50); +} diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c index d8a56aee521b..ade4a1c4e2a3 100644 --- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c +++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c @@ -60,9 +60,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr) dev_err(dev, "no sata clock.\n"); return PTR_ERR(sata_clk); } - ret = clk_enable(sata_clk); + ret = clk_prepare_enable(sata_clk); if (ret) { - dev_err(dev, "can't enable sata clock.\n"); + dev_err(dev, "can't prepare/enable sata clock.\n"); goto put_sata_clk; } @@ -73,9 +73,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr) ret = PTR_ERR(sata_ref_clk); goto release_sata_clk; } - ret = clk_enable(sata_ref_clk); + ret = clk_prepare_enable(sata_ref_clk); if (ret) { - dev_err(dev, "can't enable sata ref clock.\n"); + dev_err(dev, "can't prepare/enable sata ref clock.\n"); goto put_sata_ref_clk; } @@ -104,11 +104,11 @@ static int imx_sata_init(struct device *dev, void __iomem *addr) return 0; release_sata_ref_clk: - clk_disable(sata_ref_clk); + clk_disable_unprepare(sata_ref_clk); put_sata_ref_clk: clk_put(sata_ref_clk); release_sata_clk: - clk_disable(sata_clk); + clk_disable_unprepare(sata_clk); put_sata_clk: clk_put(sata_clk); @@ -117,10 +117,10 @@ put_sata_clk: static void imx_sata_exit(struct device *dev) { - clk_disable(sata_ref_clk); + clk_disable_unprepare(sata_ref_clk); clk_put(sata_ref_clk); - clk_disable(sata_clk); + clk_disable_unprepare(sata_clk); clk_put(sata_clk); } diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/plat-mxc/devices/platform-mx2-camera.c index b3f4828dc447..11eace953a09 100644 --- a/arch/arm/plat-mxc/devices/platform-mx2-camera.c +++ b/arch/arm/plat-mxc/devices/platform-mx2-camera.c @@ -62,3 +62,21 @@ struct platform_device *__init imx_add_mx2_camera( res, data->iobaseemmaprp ? 4 : 2, pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } + +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_camera_data *data) +{ + struct resource res[] = { + { + .start = data->iobaseemmaprp, + .end = data->iobaseemmaprp + data->iosizeemmaprp - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irqemmaprp, + .end = data->irqemmaprp, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("m2m-emmaprp", 0, + res, 2, NULL, 0, DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c index d3467f818c33..9129c9e7d532 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/plat-mxc/epit.c @@ -203,7 +203,7 @@ static int __init epit_clockevent_init(struct clk *timer_clk) void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) { - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); timer_base = base; diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h deleted file mode 100644 index 6fda788ed0e9..000000000000 --- a/arch/arm/plat-mxc/include/mach/audmux.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef __MACH_AUDMUX_H -#define __MACH_AUDMUX_H - -#define MX27_AUDMUX_HPCR1_SSI0 0 -#define MX27_AUDMUX_HPCR2_SSI1 1 -#define MX27_AUDMUX_HPCR3_SSI_PINS_4 2 -#define MX27_AUDMUX_PPCR1_SSI_PINS_1 3 -#define MX27_AUDMUX_PPCR2_SSI_PINS_2 4 -#define MX27_AUDMUX_PPCR3_SSI_PINS_3 5 - -#define MX31_AUDMUX_PORT1_SSI0 0 -#define MX31_AUDMUX_PORT2_SSI1 1 -#define MX31_AUDMUX_PORT3_SSI_PINS_3 2 -#define MX31_AUDMUX_PORT4_SSI_PINS_4 3 -#define MX31_AUDMUX_PORT5_SSI_PINS_5 4 -#define MX31_AUDMUX_PORT6_SSI_PINS_6 5 - -#define MX51_AUDMUX_PORT1_SSI0 0 -#define MX51_AUDMUX_PORT2_SSI1 1 -#define MX51_AUDMUX_PORT3 2 -#define MX51_AUDMUX_PORT4 3 -#define MX51_AUDMUX_PORT5 4 -#define MX51_AUDMUX_PORT6 5 -#define MX51_AUDMUX_PORT7 6 - -/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */ -#define MXC_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff) -#define MXC_AUDMUX_V1_PCR_INMEN (1 << 8) -#define MXC_AUDMUX_V1_PCR_TXRXEN (1 << 10) -#define MXC_AUDMUX_V1_PCR_SYN (1 << 12) -#define MXC_AUDMUX_V1_PCR_RXDSEL(x) (((x) & 0x7) << 13) -#define MXC_AUDMUX_V1_PCR_RFCSEL(x) (((x) & 0xf) << 20) -#define MXC_AUDMUX_V1_PCR_RCLKDIR (1 << 24) -#define MXC_AUDMUX_V1_PCR_RFSDIR (1 << 25) -#define MXC_AUDMUX_V1_PCR_TFCSEL(x) (((x) & 0xf) << 26) -#define MXC_AUDMUX_V1_PCR_TCLKDIR (1 << 30) -#define MXC_AUDMUX_V1_PCR_TFSDIR (1 << 31) - -/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */ -#define MXC_AUDMUX_V2_PTCR_TFSDIR (1 << 31) -#define MXC_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27) -#define MXC_AUDMUX_V2_PTCR_TCLKDIR (1 << 26) -#define MXC_AUDMUX_V2_PTCR_TCSEL(x) (((x) & 0xf) << 22) -#define MXC_AUDMUX_V2_PTCR_RFSDIR (1 << 21) -#define MXC_AUDMUX_V2_PTCR_RFSEL(x) (((x) & 0xf) << 17) -#define MXC_AUDMUX_V2_PTCR_RCLKDIR (1 << 16) -#define MXC_AUDMUX_V2_PTCR_RCSEL(x) (((x) & 0xf) << 12) -#define MXC_AUDMUX_V2_PTCR_SYN (1 << 11) - -#define MXC_AUDMUX_V2_PDCR_RXDSEL(x) (((x) & 0x7) << 13) -#define MXC_AUDMUX_V2_PDCR_TXRXEN (1 << 12) -#define MXC_AUDMUX_V2_PDCR_MODE(x) (((x) & 0x3) << 8) -#define MXC_AUDMUX_V2_PDCR_INMMASK(x) ((x) & 0xff) - -int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr); - -int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, - unsigned int pdcr); - -#endif /* __MACH_AUDMUX_H */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h deleted file mode 100644 index 94b60dd47137..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ - -#include <mach/hardware.h> - -/* - * These symbols are used by drivers/net/cs89x0.c. - * This is ugly as hell, but we have to provide them until - * someone fixed the driver. - */ - -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT -/* Offsets for the PBC Controller register */ - -/* Ethernet Controller IO base address */ -#define PBC_CS8900A_IOBASE 0x020000 - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) - -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 1bf0df81bdc6..0319c4a0cafa 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -65,6 +65,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); +extern int mx27_clocks_init_dt(void); extern int mx51_clocks_init_dt(void); extern int mx53_clocks_init_dt(void); extern int mx6q_clocks_init(void); @@ -75,6 +76,7 @@ extern void mxc_restart(char, const char *); extern void mxc_arch_reset_init(void __iomem *); extern int mx53_revision(void); extern int mx53_display_revision(void); +extern void imx_set_aips(void __iomem *); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ @@ -84,6 +86,14 @@ enum mxc_cpu_pwr_mode { STOP_POWER_OFF, /* STOP + SRPG */ }; +enum mx3_cpu_pwr_mode { + MX3_RUN, + MX3_WAIT, + MX3_DOZE, + MX3_SLEEP, +}; + +extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); extern void imx_print_silicon_rev(const char *cpu, int srev); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 6e192c4a391a..8ddda365f1a0 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -24,7 +24,7 @@ #define UART_PADDR MX51_UART1_BASE_ADDR #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) #define UART_PADDR MX53_UART1_BASE_ADDR -#elif defined (CONFIG_DEBUG_IMX6Q_UART) +#elif defined (CONFIG_DEBUG_IMX6Q_UART4) #define UART_PADDR MX6Q_UART4_BASE_ADDR #endif diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index def9ba53e23a..1b2258daa05b 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -223,6 +223,8 @@ struct imx_mx2_camera_data { struct platform_device *__init imx_add_mx2_camera( const struct imx_mx2_camera_data *data, const struct mx2_camera_platform_data *pdata); +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_camera_data *data); #include <mach/mxc_ehci.h> struct imx_mxc_ehci_data { diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h index 233d0a5e2d68..1b9080385b46 100644 --- a/arch/arm/plat-mxc/include/mach/dma.h +++ b/arch/arm/plat-mxc/include/mach/dma.h @@ -60,8 +60,7 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { - return !strcmp(dev_name(chan->device->dev), "imx31-sdma") || - !strcmp(dev_name(chan->device->dev), "imx35-sdma") || + return strstr(dev_name(chan->device->dev), "sdma") || !strcmp(dev_name(chan->device->dev), "imx-dma"); } diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S deleted file mode 100644 index def5d30cb67e..000000000000 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index f0726d48df22..c61ec0fc10d4 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -139,15 +139,15 @@ #define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL) @@ -192,54 +192,54 @@ #define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL) #define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL) #define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL) -#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL) -#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL) -#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL) -#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL) #define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL) @@ -468,11 +468,11 @@ #define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h deleted file mode 100644 index 13ad0df2e860..000000000000 --- a/arch/arm/plat-mxc/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MXC_SYSTEM_H__ -#define __ASM_ARCH_MXC_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index e032717f7d02..c0cab2270dd1 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -132,7 +132,7 @@ int pwm_enable(struct pwm_device *pwm) int rc = 0; if (!pwm->clk_enabled) { - rc = clk_enable(pwm->clk); + rc = clk_prepare_enable(pwm->clk); if (!rc) pwm->clk_enabled = 1; } @@ -145,7 +145,7 @@ void pwm_disable(struct pwm_device *pwm) writel(0, pwm->mmio_base + MX3_PWMCR); if (pwm->clk_enabled) { - clk_disable(pwm->clk); + clk_disable_unprepare(pwm->clk); pwm->clk_enabled = 0; } } diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 3599bf2cfd4f..1996c3e3b8fe 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -25,8 +25,8 @@ #include <mach/hardware.h> #include <mach/common.h> +#include <asm/system_misc.h> #include <asm/proc-fns.h> -#include <asm/system.h> #include <asm/mach-types.h> void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; @@ -48,7 +48,7 @@ void mxc_restart(char mode, const char *cmd) clk = clk_get_sys("imx2-wdt.0", NULL); if (!IS_ERR(clk)) - clk_enable(clk); + clk_prepare_enable(clk); wcr_enable = (1 << 2); } diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 1c96cdb4c35e..7daf7c9a413b 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -283,7 +283,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) { uint32_t tctl_val; - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); timer_base = base; diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h index 6508e7694a4b..582641f3dc01 100644 --- a/arch/arm/plat-nomadik/include/plat/mtu.h +++ b/arch/arm/plat-nomadik/include/plat/mtu.h @@ -1,9 +1,7 @@ #ifndef __PLAT_MTU_H #define __PLAT_MTU_H -/* should be set by the platform code */ -extern void __iomem *mtu_base; - +void nmdk_timer_init(void __iomem *base); void nmdk_clkevt_reset(void); void nmdk_clksrc_reset(void); diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index ad1b45b605a4..9222e5522a43 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -21,12 +21,6 @@ #include <asm/sched_clock.h> /* - * Guaranteed runtime conversion range in seconds for - * the clocksource and clockevent. - */ -#define MTU_MIN_RANGE 4 - -/* * The MTU device hosts four different counters, with 4 set of * registers. These are register names. */ @@ -66,12 +60,11 @@ #define MTU_PCELL2 0xff8 #define MTU_PCELL3 0xffC +static void __iomem *mtu_base; static bool clkevt_periodic; static u32 clk_prescale; static u32 nmdk_cycle; /* write-once */ -void __iomem *mtu_base; /* Assigned by machine code */ - #ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK /* * Override the global weak sched_clock symbol with this @@ -103,7 +96,6 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) void nmdk_clkevt_reset(void) { if (clkevt_periodic) { - /* Timer: configure load and background-load, and fire it up */ writel(nmdk_cycle, mtu_base + MTU_LR(1)); writel(nmdk_cycle, mtu_base + MTU_BGLR(1)); @@ -121,7 +113,6 @@ void nmdk_clkevt_reset(void) static void nmdk_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) { - switch (mode) { case CLOCK_EVT_MODE_PERIODIC: clkevt_periodic = true; @@ -183,15 +174,16 @@ void nmdk_clksrc_reset(void) mtu_base + MTU_CR(0)); } -void __init nmdk_timer_init(void) +void __init nmdk_timer_init(void __iomem *base) { unsigned long rate; struct clk *clk0; + mtu_base = base; clk0 = clk_get_sys("mtu0", NULL); BUG_ON(IS_ERR(clk0)); - - clk_enable(clk0); + BUG_ON(clk_prepare(clk0) < 0); + BUG_ON(clk_enable(clk0) < 0); /* * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz @@ -224,17 +216,8 @@ void __init nmdk_timer_init(void) setup_sched_clock(nomadik_read_sched_clock, 32, rate); #endif - /* Timer 1 is used for events */ - - clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); - - nmdk_clkevt.max_delta_ns = - clockevent_delta2ns(0xffffffff, &nmdk_clkevt); - nmdk_clkevt.min_delta_ns = - clockevent_delta2ns(0x00000002, &nmdk_clkevt); - nmdk_clkevt.cpumask = cpumask_of(0); - - /* Register irq and clockevents */ + /* Timer 1 is used for events, register irq and clockevents */ setup_irq(IRQ_MTU0, &nmdk_timer_irq); - clockevents_register_device(&nmdk_clkevt); + nmdk_clkevt.cpumask = cpumask_of(0); + clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU); } diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index aa59f4247dc5..ce1e9b96ba1a 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -14,6 +14,7 @@ config ARCH_OMAP1 select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select IRQ_DOMAIN select HAVE_IDE select NEED_MACH_MEMORY_H help @@ -24,6 +25,8 @@ config ARCH_OMAP2PLUS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select OMAP_DM_TIMER + select USE_OF + select PROC_DEVICETREE if PROC_FS help "Systems based on OMAP2, OMAP3 or OMAP4" @@ -110,14 +113,6 @@ config OMAP_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. -config OMAP_MCBSP - bool "McBSP support" - depends on ARCH_OMAP - default y - help - Say Y here if you want support for the OMAP Multichannel - Buffered Serial Port. - config OMAP_MBOX_FWK tristate "Mailbox framework support" depends on ARCH_OMAP diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 9a584614e7e6..c0fe2757b695 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -17,8 +17,6 @@ obj-$(CONFIG_ARCH_OMAP2) += omap_device.o obj-$(CONFIG_ARCH_OMAP3) += omap_device.o obj-$(CONFIG_ARCH_OMAP4) += omap_device.o -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o - obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 567e4b54f245..56b6f8b7053e 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -20,7 +20,6 @@ #include <linux/clk.h> #include <linux/mutex.h> #include <linux/cpufreq.h> -#include <linux/debugfs.h> #include <linux/io.h> #include <plat/clock.h> diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 4de7d1e79e73..f1e46ea6b81d 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/dma-mapping.h> -#include <linux/omapfb.h> #include <plat/common.h> #include <plat/board.h> @@ -65,7 +64,6 @@ const void *__init omap_get_var_config(u16 tag, size_t *len) void __init omap_reserve(void) { - omapfb_reserve_sdram_memblock(); omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 5f0f2292b7fb..5068fe5a6910 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -21,6 +21,7 @@ #include <asm/sched_clock.h> +#include <plat/hardware.h> #include <plat/common.h> #include <plat/board.h> diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 61a1ec2a6af4..39407cbe34c6 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -15,7 +15,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <plat/fpga.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 002fb4d96bbc..ecdb3da0dea9 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,7 +36,6 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <asm/system.h> #include <mach/hardware.h> #include <plat/dma.h> @@ -164,6 +163,8 @@ static inline void set_gdma_dev(int req, int dev) } #else #define set_gdma_dev(req, dev) do {} while (0) +#define omap_readl(reg) 0 +#define omap_writel(val, reg) do {} while (0) #endif void omap_set_dma_priority(int lch, int dst_port, int priority) @@ -2125,7 +2126,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) static struct platform_driver omap_system_dma_driver = { .probe = omap_system_dma_probe, - .remove = omap_system_dma_remove, + .remove = __devexit_p(omap_system_dma_remove), .driver = { .name = "omap_dma_system" }, diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index af3b92be8459..652139c0339e 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -43,6 +43,8 @@ #include <plat/dmtimer.h> +#include <mach/hardware.h> + static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); @@ -80,9 +82,9 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, static void omap_timer_restore_context(struct omap_dm_timer *timer) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET, - timer->context.tiocp_cfg); - if (timer->revision > 1) + __raw_writel(timer->context.tiocp_cfg, + timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); + if (timer->revision == 1) __raw_writel(timer->context.tistat, timer->sys_stat); __raw_writel(timer->context.tisr, timer->irq_stat); @@ -357,6 +359,19 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); + if (timer->loses_context && timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + + /* + * Since the register values are computed and written within + * __omap_dm_timer_stop, we need to use read to retrieve the + * context. + */ + timer->context.tclr = + omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + timer->context.tisr = __raw_readl(timer->irq_stat); + omap_dm_timer_disable(timer); return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_stop); diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index c9e5d7298c40..dd6f92c99e56 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -34,15 +34,11 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/sram.h> - -#include "fb.h" #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) +static bool omapfb_lcd_configured; static struct omapfb_platform_data omapfb_config; -static int config_invalid; -static int configured_regions; static u64 omap_fb_dma_mask = ~(u32)0; @@ -57,302 +53,21 @@ static struct platform_device omap_fb_device = { .num_resources = 0, }; -void omapfb_set_platform_data(struct omapfb_platform_data *data) -{ -} - -static inline int ranges_overlap(unsigned long start1, unsigned long size1, - unsigned long start2, unsigned long size2) -{ - return (start1 >= start2 && start1 < start2 + size2) || - (start2 >= start1 && start2 < start1 + size1); -} - -static inline int range_included(unsigned long start1, unsigned long size1, - unsigned long start2, unsigned long size2) -{ - return start1 >= start2 && start1 + size1 <= start2 + size2; -} - - -/* Check if there is an overlapping region. */ -static int fbmem_region_reserved(unsigned long start, size_t size) -{ - struct omapfb_mem_region *rg; - int i; - - rg = &omapfb_config.mem_desc.region[0]; - for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) { - if (!rg->paddr) - /* Empty slot. */ - continue; - if (ranges_overlap(start, size, rg->paddr, rg->size)) - return 1; - } - return 0; -} - -/* - * Get the region_idx`th region from board config/ATAG and convert it to - * our internal format. - */ -static int __init get_fbmem_region(int region_idx, struct omapfb_mem_region *rg) +void __init omapfb_set_lcd_config(const struct omap_lcd_config *config) { - const struct omap_fbmem_config *conf; - u32 paddr; - - conf = omap_get_nr_config(OMAP_TAG_FBMEM, - struct omap_fbmem_config, region_idx); - if (conf == NULL) - return -ENOENT; - - paddr = conf->start; - /* - * Low bits encode the page allocation mode, if high bits - * are zero. Otherwise we need a page aligned fixed - * address. - */ - memset(rg, 0, sizeof(*rg)); - rg->type = paddr & ~PAGE_MASK; - rg->paddr = paddr & PAGE_MASK; - rg->size = PAGE_ALIGN(conf->size); - return 0; + omapfb_config.lcd = *config; + omapfb_lcd_configured = true; } -static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type, - unsigned long mem_start, - unsigned long mem_size) -{ - /* - * Check if the configuration specifies the type explicitly. - * type = 0 && paddr = 0, a default don't care case maps to - * the SDRAM type. - */ - if (rg->type || !rg->paddr) - return 0; - if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) { - rg->type = mem_type; - return 0; - } - /* Can't determine it. */ - return -1; -} - -static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg, - unsigned long start_avail, unsigned size_avail) +static int __init omap_init_fb(void) { - unsigned long paddr = rg->paddr; - size_t size = rg->size; - - if (rg->type > OMAPFB_MEMTYPE_MAX) { - printk(KERN_ERR - "Invalid start address for FB region %d\n", region_idx); - return -EINVAL; - } - - if (!rg->size) { - printk(KERN_ERR "Zero size for FB region %d\n", region_idx); - return -EINVAL; - } - - if (!paddr) - /* Allocate this dynamically, leave paddr 0 for now. */ - return 0; - /* - * Fixed region for the given RAM range. Check if it's already - * reserved by the FB code or someone else. + * If the board file has not set the lcd config with + * omapfb_set_lcd_config(), don't bother registering the omapfb device */ - if (fbmem_region_reserved(paddr, size) || - !range_included(paddr, size, start_avail, size_avail)) { - printk(KERN_ERR "Trying to use reserved memory " - "for FB region %d\n", region_idx); - return -EINVAL; - } - - return 0; -} - -static int valid_sdram(unsigned long addr, unsigned long size) -{ - return memblock_is_region_memory(addr, size); -} - -static int reserve_sdram(unsigned long addr, unsigned long size) -{ - if (memblock_is_region_reserved(addr, size)) - return -EBUSY; - if (memblock_reserve(addr, size)) - return -ENOMEM; - return 0; -} - -/* - * Called from map_io. We need to call to this early enough so that we - * can reserve the fixed SDRAM regions before VM could get hold of them. - */ -void __init omapfb_reserve_sdram_memblock(void) -{ - unsigned long reserved = 0; - int i; - - if (config_invalid) - return; - - for (i = 0; ; i++) { - struct omapfb_mem_region rg; - - if (get_fbmem_region(i, &rg) < 0) - break; - - if (i == OMAPFB_PLANE_NUM) { - pr_err("Extraneous FB mem configuration entries\n"); - config_invalid = 1; - return; - } - - /* Check if it's our memory type. */ - if (rg.type != OMAPFB_MEMTYPE_SDRAM) - continue; - - /* Check if the region falls within SDRAM */ - if (rg.paddr && !valid_sdram(rg.paddr, rg.size)) - continue; - - if (rg.size == 0) { - pr_err("Zero size for FB region %d\n", i); - config_invalid = 1; - return; - } - - if (rg.paddr) { - if (reserve_sdram(rg.paddr, rg.size)) { - pr_err("Trying to use reserved memory for FB region %d\n", - i); - config_invalid = 1; - return; - } - reserved += rg.size; - } - - if (omapfb_config.mem_desc.region[i].size) { - pr_err("FB region %d already set\n", i); - config_invalid = 1; - return; - } - - omapfb_config.mem_desc.region[i] = rg; - configured_regions++; - } - omapfb_config.mem_desc.region_cnt = i; - if (reserved) - pr_info("Reserving %lu bytes SDRAM for frame buffer\n", - reserved); -} - -/* - * Called at sram init time, before anything is pushed to the SRAM stack. - * Because of the stack scheme, we will allocate everything from the - * start of the lowest address region to the end of SRAM. This will also - * include padding for page alignment and possible holes between regions. - * - * As opposed to the SDRAM case, we'll also do any dynamic allocations at - * this point, since the driver built as a module would have problem with - * freeing / reallocating the regions. - */ -unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail) -{ - struct omapfb_mem_region rg; - unsigned long pend_avail; - unsigned long reserved; - int i; - - if (config_invalid) + if (!omapfb_lcd_configured) return 0; - reserved = 0; - pend_avail = pstart_avail + size_avail; - for (i = 0; ; i++) { - if (get_fbmem_region(i, &rg) < 0) - break; - if (i == OMAPFB_PLANE_NUM) { - printk(KERN_ERR - "Extraneous FB mem configuration entries\n"); - config_invalid = 1; - return 0; - } - - /* Check if it's our memory type. */ - if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM, - sram_pstart, sram_size) < 0 || - (rg.type != OMAPFB_MEMTYPE_SRAM)) - continue; - BUG_ON(omapfb_config.mem_desc.region[i].size); - - if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) { - config_invalid = 1; - return 0; - } - - if (!rg.paddr) { - /* Dynamic allocation */ - if ((size_avail & PAGE_MASK) < rg.size) { - printk("Not enough SRAM for FB region %d\n", - i); - config_invalid = 1; - return 0; - } - size_avail = (size_avail - rg.size) & PAGE_MASK; - rg.paddr = pstart_avail + size_avail; - } - /* Reserve everything above the start of the region. */ - if (pend_avail - rg.paddr > reserved) - reserved = pend_avail - rg.paddr; - size_avail = pend_avail - reserved - pstart_avail; - - /* - * We have a kernel mapping for this already, so the - * driver won't have to make one. - */ - rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart); - omapfb_config.mem_desc.region[i] = rg; - configured_regions++; - } - omapfb_config.mem_desc.region_cnt = i; - if (reserved) - pr_info("Reserving %lu bytes SRAM for frame buffer\n", - reserved); - return reserved; -} - -void omapfb_set_ctrl_platform_data(void *data) -{ - omapfb_config.ctrl_platform_data = data; -} - -static int __init omap_init_fb(void) -{ - const struct omap_lcd_config *conf; - - if (config_invalid) - return 0; - if (configured_regions != omapfb_config.mem_desc.region_cnt) { - printk(KERN_ERR "Invalid FB mem configuration entries\n"); - return 0; - } - conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf == NULL) { - if (configured_regions) - /* FB mem config, but no LCD config? */ - printk(KERN_ERR "Missing LCD configuration\n"); - return 0; - } - omapfb_config.lcd = *conf; - return platform_device_register(&omap_fb_device); } @@ -374,11 +89,6 @@ static struct platform_device omap_fb_device = { .num_resources = 0, }; -void omapfb_set_platform_data(struct omapfb_platform_data *data) -{ - omapfb_config = *data; -} - static int __init omap_init_fb(void) { return platform_device_register(&omap_fb_device); @@ -386,36 +96,10 @@ static int __init omap_init_fb(void) arch_initcall(omap_init_fb); -void omapfb_reserve_sdram_memblock(void) -{ -} - -unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long start_avail, - unsigned long size_avail) -{ - return 0; -} - #else -void omapfb_set_platform_data(struct omapfb_platform_data *data) -{ -} - -void omapfb_reserve_sdram_memblock(void) -{ -} - -unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long start_avail, - unsigned long size_avail) +void __init omapfb_set_lcd_config(const struct omap_lcd_config *config) { - return 0; } #endif diff --git a/arch/arm/plat-omap/fb.h b/arch/arm/plat-omap/fb.h deleted file mode 100644 index d765d0bd8520..000000000000 --- a/arch/arm/plat-omap/fb.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __PLAT_OMAP_FB_H__ -#define __PLAT_OMAP_FB_H__ - -extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail); - -#endif /* __PLAT_OMAP_FB_H__ */ diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h deleted file mode 100644 index 56e7f2e7d12f..000000000000 --- a/arch/arm/plat-omap/include/plat/blizzard.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _BLIZZARD_H -#define _BLIZZARD_H - -struct blizzard_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - - unsigned te_connected:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 51b102dc906b..ad6f865d1f16 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -28,33 +28,8 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMS_DELTA_LATCH1_PHYS 0x01000000 -#define AMS_DELTA_LATCH1_VIRT 0xEA000000 -#define AMS_DELTA_MODEM_PHYS 0x04000000 -#define AMS_DELTA_MODEM_VIRT 0xEB000000 -#define AMS_DELTA_LATCH2_PHYS 0x08000000 -#define AMS_DELTA_LATCH2_VIRT 0xEC000000 - -#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 -#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 -#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 -#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 -#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 -#define AMS_DELTA_LATCH1_LED_VOICE 0x20 - -#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 -#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 -#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 -#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 -#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 -#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 -#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 -#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 -#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 -#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 #define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 #define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 @@ -66,9 +41,29 @@ #define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 +#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 +#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 +#define AMS_DELTA_GPIO_PIN_NAND_NCE 242 +#define AMS_DELTA_GPIO_PIN_NAND_NRE 243 +#define AMS_DELTA_GPIO_PIN_NAND_NWP 244 +#define AMS_DELTA_GPIO_PIN_NAND_NWE 245 +#define AMS_DELTA_GPIO_PIN_NAND_ALE 246 +#define AMS_DELTA_GPIO_PIN_NAND_CLE 247 +#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248 +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249 +#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250 +#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251 +#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 +#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 + +#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN +#define AMS_DELTA_LATCH2_NGPIO 16 + #ifndef __ASSEMBLY__ -void ams_delta_latch1_write(u8 mask, u8 value); -void ams_delta_latch2_write(u16 mask, u16 value); +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); +#define ams_delta_latch2_write(mask, value) \ + ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ + AMS_DELTA_LATCH2_NGPIO, (mask), (value)) #endif #endif /* CONFIG_MACH_AMS_DELTA */ diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 97126dfd2888..d5eb4c87db9d 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -28,9 +28,7 @@ enum { /* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_LCD 0x4f05 #define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_FBMEM 0x4f08 #define OMAP_TAG_STI_CONSOLE 0x4f09 #define OMAP_TAG_CAMERA_SENSOR 0x4f0a diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 6b51086fce18..dc6a86bf2172 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -250,7 +250,6 @@ IS_AM_SUBCLASS(335x, 0x335) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 - * cpu_is_omap4430(): True for OMAP4430 * cpu_is_omap3505(): True for OMAP3505 * cpu_is_omap3517(): True for OMAP3517 */ @@ -299,7 +298,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap3505() 0 #define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 -#define cpu_is_omap4430() 0 #define cpu_is_omap3630() 0 /* @@ -451,7 +449,12 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP447X_CLASS 0x44700044 #define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) -void omap2_check_revision(void); +void omap2xxx_check_revision(void); +void omap3xxx_check_revision(void); +void omap4xxx_check_revision(void); +void omap3xxx_check_features(void); +void ti81xx_check_features(void); +void omap4xxx_check_features(void); /* * Runtime detection of OMAP3 features diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 9e86ee0aed0a..b8a96c6a1a30 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -162,13 +162,6 @@ IH_MPUIO_BASE + ((nr) & 0x0f) : \ IH_GPIO_BASE + (nr)) -#define METHOD_MPUIO 0 -#define METHOD_GPIO_1510 1 -#define METHOD_GPIO_1610 2 -#define METHOD_GPIO_7XX 3 -#define METHOD_GPIO_24XX 5 -#define METHOD_GPIO_44XX 6 - struct omap_gpio_dev_attr { int bank_width; /* GPIO bank width */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ @@ -184,10 +177,21 @@ struct omap_gpio_reg_offs { u16 irqstatus; u16 irqstatus2; u16 irqenable; + u16 irqenable2; u16 set_irqenable; u16 clr_irqenable; u16 debounce; u16 debounce_en; + u16 ctrl; + u16 wkup_en; + u16 leveldetect0; + u16 leveldetect1; + u16 risingdetect; + u16 fallingdetect; + u16 irqctrl; + u16 edgectrl1; + u16 edgectrl2; + u16 pinctrl; bool irqenable_inv; }; @@ -198,45 +202,30 @@ struct omap_gpio_platform_data { int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + bool loses_context; /* whether the bank would ever lose context */ + bool is_mpuio; /* whether the bank is of type MPUIO */ + u32 non_wakeup_gpios; struct omap_gpio_reg_offs *regs; -}; -/* TODO: Analyze removing gpio_bank_count usage from driver code */ -extern int gpio_bank_count; + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); +}; extern void omap2_gpio_prepare_for_idle(int off_mode); extern void omap2_gpio_resume_after_idle(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); -extern void omap_gpio_save_context(void); -extern void omap_gpio_restore_context(void); /*-------------------------------------------------------------------------*/ -/* Wrappers for "new style" GPIO calls, using the new infrastructure +/* + * Wrappers for "new style" GPIO calls, using the new infrastructure * which lets us plug in FPGA, I2C, and other implementations. - * * + * * The original OMAP-specific calls should eventually be removed. */ #include <linux/errno.h> #include <asm-generic/gpio.h> -static inline int irq_to_gpio(unsigned irq) -{ - int tmp; - - /* omap1 SOC mpuio */ - if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16))) - return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES; - - /* SOC gpio */ - tmp = irq - IH_GPIO_BASE; - if (tmp < OMAP_MAX_GPIO_LINES) - return tmp; - - /* we don't supply reverse mappings for non-SOC gpios */ - return -EIO; -} - #endif diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index e897978371c2..537b05ae1f51 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -43,6 +43,12 @@ #endif #include <plat/serial.h> +#ifdef __ASSEMBLER__ +#define IOMEM(x) (x) +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + /* * --------------------------------------------------------------------------- * Common definitions for all OMAP processors diff --git a/arch/arm/plat-omap/include/plat/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h deleted file mode 100644 index 886248d32b49..000000000000 --- a/arch/arm/plat-omap/include/plat/hwa742.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _HWA742_H -#define _HWA742_H - -struct hwa742_platform_data { - unsigned te_connected:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h index 793ce9d53294..a6b21eddb212 100644 --- a/arch/arm/plat-omap/include/plat/keypad.h +++ b/arch/arm/plat-omap/include/plat/keypad.h @@ -12,6 +12,8 @@ #ifndef CONFIG_ARCH_OMAP1 #warning Please update the board to use matrix-keypad driver +#define omap_readw(reg) 0 +#define omap_writew(val, reg) do {} while (0) #endif #include <linux/input/matrix_keypad.h> diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 8fa74e2c9d6e..18814127809a 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -27,271 +27,10 @@ #include <linux/spinlock.h> #include <linux/clk.h> -/* macro for building platform_device for McBSP ports */ -#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ -static struct platform_device omap_mcbsp##port_nr = { \ - .name = "omap-mcbsp-dai", \ - .id = port_nr - 1, \ -} - #define MCBSP_CONFIG_TYPE2 0x2 #define MCBSP_CONFIG_TYPE3 0x3 #define MCBSP_CONFIG_TYPE4 0x4 -/* McBSP register numbers. Register address offset = num * reg_step */ -enum { - /* Common registers */ - OMAP_MCBSP_REG_SPCR2 = 4, - OMAP_MCBSP_REG_SPCR1, - OMAP_MCBSP_REG_RCR2, - OMAP_MCBSP_REG_RCR1, - OMAP_MCBSP_REG_XCR2, - OMAP_MCBSP_REG_XCR1, - OMAP_MCBSP_REG_SRGR2, - OMAP_MCBSP_REG_SRGR1, - OMAP_MCBSP_REG_MCR2, - OMAP_MCBSP_REG_MCR1, - OMAP_MCBSP_REG_RCERA, - OMAP_MCBSP_REG_RCERB, - OMAP_MCBSP_REG_XCERA, - OMAP_MCBSP_REG_XCERB, - OMAP_MCBSP_REG_PCR0, - OMAP_MCBSP_REG_RCERC, - OMAP_MCBSP_REG_RCERD, - OMAP_MCBSP_REG_XCERC, - OMAP_MCBSP_REG_XCERD, - OMAP_MCBSP_REG_RCERE, - OMAP_MCBSP_REG_RCERF, - OMAP_MCBSP_REG_XCERE, - OMAP_MCBSP_REG_XCERF, - OMAP_MCBSP_REG_RCERG, - OMAP_MCBSP_REG_RCERH, - OMAP_MCBSP_REG_XCERG, - OMAP_MCBSP_REG_XCERH, - - /* OMAP1-OMAP2420 registers */ - OMAP_MCBSP_REG_DRR2 = 0, - OMAP_MCBSP_REG_DRR1, - OMAP_MCBSP_REG_DXR2, - OMAP_MCBSP_REG_DXR1, - - /* OMAP2430 and onwards */ - OMAP_MCBSP_REG_DRR = 0, - OMAP_MCBSP_REG_DXR = 2, - OMAP_MCBSP_REG_SYSCON = 35, - OMAP_MCBSP_REG_THRSH2, - OMAP_MCBSP_REG_THRSH1, - OMAP_MCBSP_REG_IRQST = 40, - OMAP_MCBSP_REG_IRQEN, - OMAP_MCBSP_REG_WAKEUPEN, - OMAP_MCBSP_REG_XCCR, - OMAP_MCBSP_REG_RCCR, - OMAP_MCBSP_REG_XBUFFSTAT, - OMAP_MCBSP_REG_RBUFFSTAT, - OMAP_MCBSP_REG_SSELCR, -}; - -/* OMAP3 sidetone control registers */ -#define OMAP_ST_REG_REV 0x00 -#define OMAP_ST_REG_SYSCONFIG 0x10 -#define OMAP_ST_REG_IRQSTATUS 0x18 -#define OMAP_ST_REG_IRQENABLE 0x1C -#define OMAP_ST_REG_SGAINCR 0x24 -#define OMAP_ST_REG_SFIRCR 0x28 -#define OMAP_ST_REG_SSELCR 0x2C - -/************************** McBSP SPCR1 bit definitions ***********************/ -#define RRST 0x0001 -#define RRDY 0x0002 -#define RFULL 0x0004 -#define RSYNC_ERR 0x0008 -#define RINTM(value) ((value)<<4) /* bits 4:5 */ -#define ABIS 0x0040 -#define DXENA 0x0080 -#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ -#define RJUST(value) ((value)<<13) /* bits 13:14 */ -#define ALB 0x8000 -#define DLB 0x8000 - -/************************** McBSP SPCR2 bit definitions ***********************/ -#define XRST 0x0001 -#define XRDY 0x0002 -#define XEMPTY 0x0004 -#define XSYNC_ERR 0x0008 -#define XINTM(value) ((value)<<4) /* bits 4:5 */ -#define GRST 0x0040 -#define FRST 0x0080 -#define SOFT 0x0100 -#define FREE 0x0200 - -/************************** McBSP PCR bit definitions *************************/ -#define CLKRP 0x0001 -#define CLKXP 0x0002 -#define FSRP 0x0004 -#define FSXP 0x0008 -#define DR_STAT 0x0010 -#define DX_STAT 0x0020 -#define CLKS_STAT 0x0040 -#define SCLKME 0x0080 -#define CLKRM 0x0100 -#define CLKXM 0x0200 -#define FSRM 0x0400 -#define FSXM 0x0800 -#define RIOEN 0x1000 -#define XIOEN 0x2000 -#define IDLE_EN 0x4000 - -/************************** McBSP RCR1 bit definitions ************************/ -#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/************************** McBSP XCR1 bit definitions ************************/ -#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/*************************** McBSP RCR2 bit definitions ***********************/ -#define RDATDLY(value) (value) /* Bits 0:1 */ -#define RFIG 0x0004 -#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define RPHASE 0x8000 - -/*************************** McBSP XCR2 bit definitions ***********************/ -#define XDATDLY(value) (value) /* Bits 0:1 */ -#define XFIG 0x0004 -#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define XPHASE 0x8000 - -/************************* McBSP SRGR1 bit definitions ************************/ -#define CLKGDV(value) (value) /* Bits 0:7 */ -#define FWID(value) ((value)<<8) /* Bits 8:15 */ - -/************************* McBSP SRGR2 bit definitions ************************/ -#define FPER(value) (value) /* Bits 0:11 */ -#define FSGM 0x1000 -#define CLKSM 0x2000 -#define CLKSP 0x4000 -#define GSYNC 0x8000 - -/************************* McBSP MCR1 bit definitions *************************/ -#define RMCM 0x0001 -#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/************************* McBSP MCR2 bit definitions *************************/ -#define XMCM(value) (value) /* Bits 0:1 */ -#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/*********************** McBSP XCCR bit definitions *************************/ -#define EXTCLKGATE 0x8000 -#define PPCONNECT 0x4000 -#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */ -#define XFULL_CYCLE 0x0800 -#define DILB 0x0020 -#define XDMAEN 0x0008 -#define XDISABLE 0x0001 - -/********************** McBSP RCCR bit definitions *************************/ -#define RFULL_CYCLE 0x0800 -#define RDMAEN 0x0008 -#define RDISABLE 0x0001 - -/********************** McBSP SYSCONFIG bit definitions ********************/ -#define CLOCKACTIVITY(value) ((value)<<8) -#define SIDLEMODE(value) ((value)<<3) -#define ENAWAKEUP 0x0004 -#define SOFTRST 0x0002 - -/********************** McBSP SSELCR bit definitions ***********************/ -#define SIDETONEEN 0x0400 - -/********************** McBSP Sidetone SYSCONFIG bit definitions ***********/ -#define ST_AUTOIDLE 0x0001 - -/********************** McBSP Sidetone SGAINCR bit definitions *************/ -#define ST_CH1GAIN(value) ((value<<16)) /* Bits 16:31 */ -#define ST_CH0GAIN(value) (value) /* Bits 0:15 */ - -/********************** McBSP Sidetone SFIRCR bit definitions **************/ -#define ST_FIRCOEFF(value) (value) /* Bits 0:15 */ - -/********************** McBSP Sidetone SSELCR bit definitions **************/ -#define ST_COEFFWRDONE 0x0004 -#define ST_COEFFWREN 0x0002 -#define ST_SIDETONEEN 0x0001 - -/********************** McBSP DMA operating modes **************************/ -#define MCBSP_DMA_MODE_ELEMENT 0 -#define MCBSP_DMA_MODE_THRESHOLD 1 -#define MCBSP_DMA_MODE_FRAME 2 - -/********************** McBSP WAKEUPEN bit definitions *********************/ -#define XEMPTYEOFEN 0x4000 -#define XRDYEN 0x0400 -#define XEOFEN 0x0200 -#define XFSXEN 0x0100 -#define XSYNCERREN 0x0080 -#define RRDYEN 0x0008 -#define REOFEN 0x0004 -#define RFSREN 0x0002 -#define RSYNCERREN 0x0001 - -/* CLKR signal muxing options */ -#define CLKR_SRC_CLKR 0 -#define CLKR_SRC_CLKX 1 - -/* FSR signal muxing options */ -#define FSR_SRC_FSR 0 -#define FSR_SRC_FSX 1 - -/* McBSP functional clock sources */ -#define MCBSP_CLKS_PRCM_SRC 0 -#define MCBSP_CLKS_PAD_SRC 1 - -/* we don't do multichannel for now */ -struct omap_mcbsp_reg_cfg { - u16 spcr2; - u16 spcr1; - u16 rcr2; - u16 rcr1; - u16 xcr2; - u16 xcr1; - u16 srgr2; - u16 srgr1; - u16 mcr2; - u16 mcr1; - u16 pcr0; - u16 rcerc; - u16 rcerd; - u16 xcerc; - u16 xcerd; - u16 rcere; - u16 rcerf; - u16 xcere; - u16 xcerf; - u16 rcerg; - u16 rcerh; - u16 xcerg; - u16 xcerh; - u16 xccr; - u16 rccr; -}; - -typedef enum { - OMAP_MCBSP_WORD_8 = 0, - OMAP_MCBSP_WORD_12, - OMAP_MCBSP_WORD_16, - OMAP_MCBSP_WORD_20, - OMAP_MCBSP_WORD_24, - OMAP_MCBSP_WORD_32, -} omap_mcbsp_word_length; - /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); @@ -312,43 +51,6 @@ struct omap_mcbsp_platform_data { int (*mux_signal)(struct device *dev, const char *signal, const char *src); }; -struct omap_mcbsp_st_data { - void __iomem *io_base_st; - bool running; - bool enabled; - s16 taps[128]; /* Sidetone filter coefficients */ - int nr_taps; /* Number of filter coefficients in use */ - s16 ch0gain; - s16 ch1gain; -}; - -struct omap_mcbsp { - struct device *dev; - unsigned long phys_base; - unsigned long phys_dma_base; - void __iomem *io_base; - u8 id; - u8 free; - - int rx_irq; - int tx_irq; - - /* DMA stuff */ - u8 dma_rx_sync; - u8 dma_tx_sync; - - /* Protect the field .free, while checking if the mcbsp is in use */ - spinlock_t lock; - struct omap_mcbsp_platform_data *pdata; - struct clk *fclk; - struct omap_mcbsp_st_data *st_data; - int dma_op_mode; - u16 max_tx_thres; - u16 max_rx_thres; - void *reg_cache; - int reg_cache_size; -}; - /** * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod * @sidetone: name of the sidetone device @@ -357,39 +59,4 @@ struct omap_mcbsp_dev_attr { const char *sidetone; }; -extern struct omap_mcbsp **mcbsp_ptr; -extern int omap_mcbsp_count; - -int omap_mcbsp_init(void); -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); -void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); -u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); -u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); -u16 omap_mcbsp_get_fifo_size(unsigned int id); -u16 omap_mcbsp_get_tx_delay(unsigned int id); -u16 omap_mcbsp_get_rx_delay(unsigned int id); -int omap_mcbsp_get_dma_op_mode(unsigned int id); -int omap_mcbsp_request(unsigned int id); -void omap_mcbsp_free(unsigned int id); -void omap_mcbsp_start(unsigned int id, int tx, int rx); -void omap_mcbsp_stop(unsigned int id, int tx, int rx); - -/* McBSP functional clock source changing function */ -extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); - -/* McBSP signal muxing API */ -void omap2_mcbsp1_mux_clkr_src(u8 mux); -void omap2_mcbsp1_mux_fsr_src(u8 mux); - -int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream); -int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream); - -/* Sidetone specific API */ -int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); -int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain); -int omap_st_enable(unsigned int id); -int omap_st_disable(unsigned int id); -int omap_st_is_enabled(unsigned int id); - #endif diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h index 3d51b18131cc..a357eb26bd25 100644 --- a/arch/arm/plat-omap/include/plat/mcspi.h +++ b/arch/arm/plat-omap/include/plat/mcspi.h @@ -18,9 +18,6 @@ struct omap2_mcspi_dev_attr { struct omap2_mcspi_device_config { unsigned turbo_mode:1; - - /* Do we want one channel enabled at the same time? */ - unsigned single_channel:1; }; #endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index f75946c3293d..7a38750c0079 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -137,8 +137,6 @@ struct omap_mmc_platform_data { int (*set_power)(struct device *dev, int slot, int power_on, int vdd); int (*get_ro)(struct device *dev, int slot); - int (*set_sleep)(struct device *dev, int slot, int sleep, - int vdd, int cardsleep); void (*remux)(struct device *dev, int slot, int power_on); /* Call back before enabling / disabling regulators */ void (*before_set_reg)(struct device *dev, int slot, diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h index 9fe6c8783236..8ad0a377a54b 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -1,15 +1,6 @@ #ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H #define ARCH_ARM_PLAT_OMAP4_KEYPAD_H -#include <linux/input/matrix_keypad.h> - -struct omap4_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - u8 rows; - u8 cols; -}; - extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, struct omap_board_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 51423d2727a5..4327b2c90c3d 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -36,7 +36,7 @@ #include <plat/omap_hwmod.h> -extern struct device omap_device_parent; +extern struct dev_pm_domain omap_device_pm_domain; /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 @@ -100,6 +100,13 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); +struct omap_device *omap_device_alloc(struct platform_device *pdev, + struct omap_hwmod **ohs, int oh_cnt, + struct omap_device_pm_latency *pm_lats, + int pm_lats_cnt); +void omap_device_delete(struct omap_device *od); +int omap_device_register(struct platform_device *pdev); + void __iomem *omap_device_get_rt_va(struct omap_device *od); struct device *omap_device_get_by_hwmod_name(const char *oh_name); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 647010109afa..9e8e63d52aab 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -484,7 +484,6 @@ struct omap_hwmod_class { * @main_clk: main clock: OMAP clock name * @_clk: pointer to the main struct clk (filled in at runtime) * @opt_clks: other device clocks that drivers can request (0..*) - * @vdd_name: voltage domain name * @voltdm: pointer to voltage domain (filled in at runtime) * @masters: ptr to array of OCP ifs that this hwmod can initiate on * @slaves: ptr to array of OCP ifs that this hwmod can respond on @@ -528,7 +527,6 @@ struct omap_hwmod { struct omap_hwmod_opt_clk *opt_clks; char *clkdm_name; struct clockdomain *clkdm; - char *vdd_name; struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ void *dev_attr; diff --git a/arch/arm/plat-omap/include/plat/remoteproc.h b/arch/arm/plat-omap/include/plat/remoteproc.h new file mode 100644 index 000000000000..b10eac89e2e9 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/remoteproc.h @@ -0,0 +1,57 @@ +/* + * Remote Processor - omap-specific bits + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PLAT_REMOTEPROC_H +#define _PLAT_REMOTEPROC_H + +struct rproc_ops; +struct platform_device; + +/* + * struct omap_rproc_pdata - omap remoteproc's platform data + * @name: the remoteproc's name + * @oh_name: omap hwmod device + * @oh_name_opt: optional, secondary omap hwmod device + * @firmware: name of firmware file to load + * @mbox_name: name of omap mailbox device to use with this rproc + * @ops: start/stop rproc handlers + * @device_enable: omap-specific handler for enabling a device + * @device_shutdown: omap-specific handler for shutting down a device + */ +struct omap_rproc_pdata { + const char *name; + const char *oh_name; + const char *oh_name_opt; + const char *firmware; + const char *mbox_name; + const struct rproc_ops *ops; + int (*device_enable) (struct platform_device *pdev); + int (*device_shutdown) (struct platform_device *pdev); +}; + +#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE) + +void __init omap_rproc_reserve_cma(void); + +#else + +void __init omap_rproc_reserve_cma(void) +{ +} + +#endif + +#endif /* _PLAT_REMOTEPROC_H */ diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 198d1e6a4a6c..b073e5f2b190 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -110,7 +110,6 @@ struct omap_board_data; struct omap_uart_port_info; extern void omap_serial_init(void); -extern int omap_uart_can_sleep(void); extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); extern void omap_serial_init_port(struct omap_board_data *bdata, struct omap_uart_port_info *platform_data); diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 75aa1b2bef51..227ae2657554 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -101,4 +101,5 @@ static inline void omap_push_sram_idle(void) {} #else #define OMAP4_SRAM_PA 0x40300000 #endif +#define AM33XX_SRAM_PA 0x40300000 #endif diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h deleted file mode 100644 index 8e5ebd74b129..000000000000 --- a/arch/arm/plat-omap/include/plat/system.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copied from arch/arm/mach-sa1100/include/mach/system.h - * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <asm/proc-fns.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h index d2fcd789bb9a..1b4b2da86203 100644 --- a/arch/arm/plat-omap/include/plat/tc.h +++ b/arch/arm/plat-omap/include/plat/tc.h @@ -84,23 +84,6 @@ #define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) #define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) -/* Almost all documentation for chip and board memory maps assumes - * BM is clear. Most devel boards have a switch to control booting - * from NOR flash (using external chipselect 3) rather than mask ROM, - * which uses BM to interchange the physical CS0 and CS3 addresses. - */ -static inline u32 omap_cs0_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? OMAP_CS3_PHYS : 0; -} - -static inline u32 omap_cs3_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? 0 : OMAP_CS3_PHYS; -} - #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_TC_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 6ee90495ca4c..cc3f11ba7a99 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP3(3, igep0020); DEBUG_LL_OMAP3(3, igep0030); DEBUG_LL_OMAP3(3, nokia_rm680); + DEBUG_LL_OMAP3(3, nokia_rm696); DEBUG_LL_OMAP3(3, nokia_rx51); DEBUG_LL_OMAP3(3, omap3517evm); DEBUG_LL_OMAP3(3, omap3_beagle); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index dc864b580da0..d0fc9f4dc155 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -3,6 +3,7 @@ #ifndef __ASM_ARCH_OMAP_USB_H #define __ASM_ARCH_OMAP_USB_H +#include <linux/io.h> #include <linux/usb/musb.h> #include <plat/board.h> @@ -105,6 +106,46 @@ extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); + +/* + * NOTE: Please update omap USB drivers to use ioremap + read/write + */ + +#define OMAP2_L4_IO_OFFSET 0xb2000000 +#define IOMEM(x) ((void __force __iomem *)(x)) +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) + +static inline u8 omap_readb(u32 pa) +{ + return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline u16 omap_readw(u32 pa) +{ + return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline u32 omap_readl(u32 pa) +{ + return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline void omap_writeb(u8 v, u32 pa) +{ + __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); +} + + +static inline void omap_writew(u16 v, u32 pa) +{ + __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline void omap_writel(u32 v, u32 pa) +{ + __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); +} + #endif extern void am35x_musb_reset(void); diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h index 0aa4ecd12c7d..4d65b7d06e6c 100644 --- a/arch/arm/plat-omap/include/plat/vram.h +++ b/arch/arm/plat-omap/include/plat/vram.h @@ -23,40 +23,21 @@ #include <linux/types.h> -#define OMAP_VRAM_MEMTYPE_SDRAM 0 -#define OMAP_VRAM_MEMTYPE_SRAM 1 -#define OMAP_VRAM_MEMTYPE_MAX 1 - extern int omap_vram_add_region(unsigned long paddr, size_t size); extern int omap_vram_free(unsigned long paddr, size_t size); -extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); +extern int omap_vram_alloc(size_t size, unsigned long *paddr); extern int omap_vram_reserve(unsigned long paddr, size_t size); extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, unsigned long *largest_free_block); #ifdef CONFIG_OMAP2_VRAM extern void omap_vram_set_sdram_vram(u32 size, u32 start); -extern void omap_vram_set_sram_vram(u32 size, u32 start); extern void omap_vram_reserve_sdram_memblock(void); -extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail); #else static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } -static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } static inline void omap_vram_reserve_sdram_memblock(void) { } -static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail) -{ - return 0; -} #endif #endif diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index ad80112c2275..ad32621aa52e 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -307,7 +307,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox) if (!--mbox->use_count) { free_irq(mbox->irq, mbox); tasklet_kill(&mbox->txq->tasklet); - flush_work_sync(&mbox->rxq->work); + flush_work_sync(&mbox->rxq->work); mbox_queue_free(mbox->txq); mbox_queue_free(mbox->rxq); } diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c deleted file mode 100644 index 4b15cd7926d7..000000000000 --- a/arch/arm/plat-omap/mcbsp.c +++ /dev/null @@ -1,1361 +0,0 @@ -/* - * linux/arch/arm/plat-omap/mcbsp.c - * - * Copyright (C) 2004 Nokia Corporation - * Author: Samuel Ortiz <samuel.ortiz@nokia.com> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Multichannel mode not supported. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <plat/mcbsp.h> -#include <linux/pm_runtime.h> - -struct omap_mcbsp **mcbsp_ptr; -int omap_mcbsp_count; - -#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) -#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; - -static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) -{ - void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; - - if (mcbsp->pdata->reg_size == 2) { - ((u16 *)mcbsp->reg_cache)[reg] = (u16)val; - __raw_writew((u16)val, addr); - } else { - ((u32 *)mcbsp->reg_cache)[reg] = val; - __raw_writel(val, addr); - } -} - -static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache) -{ - void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; - - if (mcbsp->pdata->reg_size == 2) { - return !from_cache ? __raw_readw(addr) : - ((u16 *)mcbsp->reg_cache)[reg]; - } else { - return !from_cache ? __raw_readl(addr) : - ((u32 *)mcbsp->reg_cache)[reg]; - } -} - -static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) -{ - __raw_writel(val, mcbsp->st_data->io_base_st + reg); -} - -static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg) -{ - return __raw_readl(mcbsp->st_data->io_base_st + reg); -} - -#define MCBSP_READ(mcbsp, reg) \ - omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0) -#define MCBSP_WRITE(mcbsp, reg, val) \ - omap_mcbsp_write(mcbsp, OMAP_MCBSP_REG_##reg, val) -#define MCBSP_READ_CACHE(mcbsp, reg) \ - omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1) - -#define MCBSP_ST_READ(mcbsp, reg) \ - omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg) -#define MCBSP_ST_WRITE(mcbsp, reg, val) \ - omap_mcbsp_st_write(mcbsp, OMAP_ST_REG_##reg, val) - -static void omap_mcbsp_dump_reg(u8 id) -{ - struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id); - - dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id); - dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", - MCBSP_READ(mcbsp, DRR2)); - dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", - MCBSP_READ(mcbsp, DRR1)); - dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", - MCBSP_READ(mcbsp, DXR2)); - dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", - MCBSP_READ(mcbsp, DXR1)); - dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", - MCBSP_READ(mcbsp, SPCR2)); - dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", - MCBSP_READ(mcbsp, SPCR1)); - dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", - MCBSP_READ(mcbsp, RCR2)); - dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", - MCBSP_READ(mcbsp, RCR1)); - dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", - MCBSP_READ(mcbsp, XCR2)); - dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", - MCBSP_READ(mcbsp, XCR1)); - dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", - MCBSP_READ(mcbsp, SRGR2)); - dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", - MCBSP_READ(mcbsp, SRGR1)); - dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", - MCBSP_READ(mcbsp, PCR0)); - dev_dbg(mcbsp->dev, "***********************\n"); -} - -static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) -{ - struct omap_mcbsp *mcbsp_tx = dev_id; - u16 irqst_spcr2; - - irqst_spcr2 = MCBSP_READ(mcbsp_tx, SPCR2); - dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2); - - if (irqst_spcr2 & XSYNC_ERR) { - dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n", - irqst_spcr2); - /* Writing zero to XSYNC_ERR clears the IRQ */ - MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2)); - } - - return IRQ_HANDLED; -} - -static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) -{ - struct omap_mcbsp *mcbsp_rx = dev_id; - u16 irqst_spcr1; - - irqst_spcr1 = MCBSP_READ(mcbsp_rx, SPCR1); - dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1); - - if (irqst_spcr1 & RSYNC_ERR) { - dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n", - irqst_spcr1); - /* Writing zero to RSYNC_ERR clears the IRQ */ - MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1)); - } - - return IRQ_HANDLED; -} - -/* - * omap_mcbsp_config simply write a config to the - * appropriate McBSP. - * You either call this function or set the McBSP registers - * by yourself before calling omap_mcbsp_start(). - */ -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n", - mcbsp->id, mcbsp->phys_base); - - /* We write the given config */ - MCBSP_WRITE(mcbsp, SPCR2, config->spcr2); - MCBSP_WRITE(mcbsp, SPCR1, config->spcr1); - MCBSP_WRITE(mcbsp, RCR2, config->rcr2); - MCBSP_WRITE(mcbsp, RCR1, config->rcr1); - MCBSP_WRITE(mcbsp, XCR2, config->xcr2); - MCBSP_WRITE(mcbsp, XCR1, config->xcr1); - MCBSP_WRITE(mcbsp, SRGR2, config->srgr2); - MCBSP_WRITE(mcbsp, SRGR1, config->srgr1); - MCBSP_WRITE(mcbsp, MCR2, config->mcr2); - MCBSP_WRITE(mcbsp, MCR1, config->mcr1); - MCBSP_WRITE(mcbsp, PCR0, config->pcr0); - if (mcbsp->pdata->has_ccr) { - MCBSP_WRITE(mcbsp, XCCR, config->xccr); - MCBSP_WRITE(mcbsp, RCCR, config->rccr); - } -} -EXPORT_SYMBOL(omap_mcbsp_config); - -/** - * omap_mcbsp_dma_params - returns the dma channel number - * @id - mcbsp id - * @stream - indicates the direction of data flow (rx or tx) - * - * Returns the dma channel number for the rx channel or tx channel - * based on the value of @stream for the requested mcbsp given by @id - */ -int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (stream) - return mcbsp->dma_rx_sync; - else - return mcbsp->dma_tx_sync; -} -EXPORT_SYMBOL(omap_mcbsp_dma_ch_params); - -/** - * omap_mcbsp_dma_reg_params - returns the address of mcbsp data register - * @id - mcbsp id - * @stream - indicates the direction of data flow (rx or tx) - * - * Returns the address of mcbsp data transmit register or data receive register - * to be used by DMA for transferring/receiving data based on the value of - * @stream for the requested mcbsp given by @id - */ -int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream) -{ - struct omap_mcbsp *mcbsp; - int data_reg; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (mcbsp->pdata->reg_size == 2) { - if (stream) - data_reg = OMAP_MCBSP_REG_DRR1; - else - data_reg = OMAP_MCBSP_REG_DXR1; - } else { - if (stream) - data_reg = OMAP_MCBSP_REG_DRR; - else - data_reg = OMAP_MCBSP_REG_DXR; - } - - return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step; -} -EXPORT_SYMBOL(omap_mcbsp_dma_reg_params); - -static void omap_st_on(struct omap_mcbsp *mcbsp) -{ - unsigned int w; - - if (mcbsp->pdata->enable_st_clock) - mcbsp->pdata->enable_st_clock(mcbsp->id, 1); - - /* Enable McBSP Sidetone */ - w = MCBSP_READ(mcbsp, SSELCR); - MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN); - - /* Enable Sidetone from Sidetone Core */ - w = MCBSP_ST_READ(mcbsp, SSELCR); - MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN); -} - -static void omap_st_off(struct omap_mcbsp *mcbsp) -{ - unsigned int w; - - w = MCBSP_ST_READ(mcbsp, SSELCR); - MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN)); - - w = MCBSP_READ(mcbsp, SSELCR); - MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN)); - - if (mcbsp->pdata->enable_st_clock) - mcbsp->pdata->enable_st_clock(mcbsp->id, 0); -} - -static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir) -{ - u16 val, i; - - val = MCBSP_ST_READ(mcbsp, SSELCR); - - if (val & ST_COEFFWREN) - MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN)); - - MCBSP_ST_WRITE(mcbsp, SSELCR, val | ST_COEFFWREN); - - for (i = 0; i < 128; i++) - MCBSP_ST_WRITE(mcbsp, SFIRCR, fir[i]); - - i = 0; - - val = MCBSP_ST_READ(mcbsp, SSELCR); - while (!(val & ST_COEFFWRDONE) && (++i < 1000)) - val = MCBSP_ST_READ(mcbsp, SSELCR); - - MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN)); - - if (i == 1000) - dev_err(mcbsp->dev, "McBSP FIR load error!\n"); -} - -static void omap_st_chgain(struct omap_mcbsp *mcbsp) -{ - u16 w; - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - w = MCBSP_ST_READ(mcbsp, SSELCR); - - MCBSP_ST_WRITE(mcbsp, SGAINCR, ST_CH0GAIN(st_data->ch0gain) | \ - ST_CH1GAIN(st_data->ch1gain)); -} - -int omap_st_set_chgain(unsigned int id, int channel, s16 chgain) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - int ret = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENOENT; - - spin_lock_irq(&mcbsp->lock); - if (channel == 0) - st_data->ch0gain = chgain; - else if (channel == 1) - st_data->ch1gain = chgain; - else - ret = -EINVAL; - - if (st_data->enabled) - omap_st_chgain(mcbsp); - spin_unlock_irq(&mcbsp->lock); - - return ret; -} -EXPORT_SYMBOL(omap_st_set_chgain); - -int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - int ret = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENOENT; - - spin_lock_irq(&mcbsp->lock); - if (channel == 0) - *chgain = st_data->ch0gain; - else if (channel == 1) - *chgain = st_data->ch1gain; - else - ret = -EINVAL; - spin_unlock_irq(&mcbsp->lock); - - return ret; -} -EXPORT_SYMBOL(omap_st_get_chgain); - -static int omap_st_start(struct omap_mcbsp *mcbsp) -{ - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - if (st_data && st_data->enabled && !st_data->running) { - omap_st_fir_write(mcbsp, st_data->taps); - omap_st_chgain(mcbsp); - - if (!mcbsp->free) { - omap_st_on(mcbsp); - st_data->running = 1; - } - } - - return 0; -} - -int omap_st_enable(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENODEV; - - spin_lock_irq(&mcbsp->lock); - st_data->enabled = 1; - omap_st_start(mcbsp); - spin_unlock_irq(&mcbsp->lock); - - return 0; -} -EXPORT_SYMBOL(omap_st_enable); - -static int omap_st_stop(struct omap_mcbsp *mcbsp) -{ - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - if (st_data && st_data->running) { - if (!mcbsp->free) { - omap_st_off(mcbsp); - st_data->running = 0; - } - } - - return 0; -} - -int omap_st_disable(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - int ret = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENODEV; - - spin_lock_irq(&mcbsp->lock); - omap_st_stop(mcbsp); - st_data->enabled = 0; - spin_unlock_irq(&mcbsp->lock); - - return ret; -} -EXPORT_SYMBOL(omap_st_disable); - -int omap_st_is_enabled(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENODEV; - - - return st_data->enabled; -} -EXPORT_SYMBOL(omap_st_is_enabled); - -/* - * omap_mcbsp_set_rx_threshold configures the transmit threshold in words. - * The threshold parameter is 1 based, and it is converted (threshold - 1) - * for the THRSH2 register. - */ -void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return; - - if (threshold && threshold <= mcbsp->max_tx_thres) - MCBSP_WRITE(mcbsp, THRSH2, threshold - 1); -} -EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold); - -/* - * omap_mcbsp_set_rx_threshold configures the receive threshold in words. - * The threshold parameter is 1 based, and it is converted (threshold - 1) - * for the THRSH1 register. - */ -void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return; - - if (threshold && threshold <= mcbsp->max_rx_thres) - MCBSP_WRITE(mcbsp, THRSH1, threshold - 1); -} -EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold); - -/* - * omap_mcbsp_get_max_tx_thres just return the current configured - * maximum threshold for transmission - */ -u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - return mcbsp->max_tx_thres; -} -EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold); - -/* - * omap_mcbsp_get_max_rx_thres just return the current configured - * maximum threshold for reception - */ -u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - return mcbsp->max_rx_thres; -} -EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold); - -u16 omap_mcbsp_get_fifo_size(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - return mcbsp->pdata->buffer_size; -} -EXPORT_SYMBOL(omap_mcbsp_get_fifo_size); - -/* - * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO - */ -u16 omap_mcbsp_get_tx_delay(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - u16 buffstat; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return 0; - - /* Returns the number of free locations in the buffer */ - buffstat = MCBSP_READ(mcbsp, XBUFFSTAT); - - /* Number of slots are different in McBSP ports */ - return mcbsp->pdata->buffer_size - buffstat; -} -EXPORT_SYMBOL(omap_mcbsp_get_tx_delay); - -/* - * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO - * to reach the threshold value (when the DMA will be triggered to read it) - */ -u16 omap_mcbsp_get_rx_delay(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - u16 buffstat, threshold; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return 0; - - /* Returns the number of used locations in the buffer */ - buffstat = MCBSP_READ(mcbsp, RBUFFSTAT); - /* RX threshold */ - threshold = MCBSP_READ(mcbsp, THRSH1); - - /* Return the number of location till we reach the threshold limit */ - if (threshold <= buffstat) - return 0; - else - return threshold - buffstat; -} -EXPORT_SYMBOL(omap_mcbsp_get_rx_delay); - -/* - * omap_mcbsp_get_dma_op_mode just return the current configured - * operating mode for the mcbsp channel - */ -int omap_mcbsp_get_dma_op_mode(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - int dma_op_mode; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - dma_op_mode = mcbsp->dma_op_mode; - - return dma_op_mode; -} -EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); - -int omap_mcbsp_request(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - void *reg_cache; - int err; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL); - if (!reg_cache) { - return -ENOMEM; - } - - spin_lock(&mcbsp->lock); - if (!mcbsp->free) { - dev_err(mcbsp->dev, "McBSP%d is currently in use\n", - mcbsp->id); - err = -EBUSY; - goto err_kfree; - } - - mcbsp->free = false; - mcbsp->reg_cache = reg_cache; - spin_unlock(&mcbsp->lock); - - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) - mcbsp->pdata->ops->request(id); - - pm_runtime_get_sync(mcbsp->dev); - - /* Enable wakeup behavior */ - if (mcbsp->pdata->has_wakeup) - MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); - - /* - * Make sure that transmitter, receiver and sample-rate generator are - * not running before activating IRQs. - */ - MCBSP_WRITE(mcbsp, SPCR1, 0); - MCBSP_WRITE(mcbsp, SPCR2, 0); - - err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, - 0, "McBSP", (void *)mcbsp); - if (err != 0) { - dev_err(mcbsp->dev, "Unable to request TX IRQ %d " - "for McBSP%d\n", mcbsp->tx_irq, - mcbsp->id); - goto err_clk_disable; - } - - if (mcbsp->rx_irq) { - err = request_irq(mcbsp->rx_irq, - omap_mcbsp_rx_irq_handler, - 0, "McBSP", (void *)mcbsp); - if (err != 0) { - dev_err(mcbsp->dev, "Unable to request RX IRQ %d " - "for McBSP%d\n", mcbsp->rx_irq, - mcbsp->id); - goto err_free_irq; - } - } - - return 0; -err_free_irq: - free_irq(mcbsp->tx_irq, (void *)mcbsp); -err_clk_disable: - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) - mcbsp->pdata->ops->free(id); - - /* Disable wakeup behavior */ - if (mcbsp->pdata->has_wakeup) - MCBSP_WRITE(mcbsp, WAKEUPEN, 0); - - pm_runtime_put_sync(mcbsp->dev); - - spin_lock(&mcbsp->lock); - mcbsp->free = true; - mcbsp->reg_cache = NULL; -err_kfree: - spin_unlock(&mcbsp->lock); - kfree(reg_cache); - - return err; -} -EXPORT_SYMBOL(omap_mcbsp_request); - -void omap_mcbsp_free(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - void *reg_cache; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) - mcbsp->pdata->ops->free(id); - - /* Disable wakeup behavior */ - if (mcbsp->pdata->has_wakeup) - MCBSP_WRITE(mcbsp, WAKEUPEN, 0); - - pm_runtime_put_sync(mcbsp->dev); - - if (mcbsp->rx_irq) - free_irq(mcbsp->rx_irq, (void *)mcbsp); - free_irq(mcbsp->tx_irq, (void *)mcbsp); - - reg_cache = mcbsp->reg_cache; - - spin_lock(&mcbsp->lock); - if (mcbsp->free) - dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id); - else - mcbsp->free = true; - mcbsp->reg_cache = NULL; - spin_unlock(&mcbsp->lock); - - if (reg_cache) - kfree(reg_cache); -} -EXPORT_SYMBOL(omap_mcbsp_free); - -/* - * Here we start the McBSP, by enabling transmitter, receiver or both. - * If no transmitter or receiver is active prior calling, then sample-rate - * generator and frame sync are started. - */ -void omap_mcbsp_start(unsigned int id, int tx, int rx) -{ - struct omap_mcbsp *mcbsp; - int enable_srg = 0; - u16 w; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (mcbsp->st_data) - omap_st_start(mcbsp); - - /* Only enable SRG, if McBSP is master */ - w = MCBSP_READ_CACHE(mcbsp, PCR0); - if (w & (FSXM | FSRM | CLKXM | CLKRM)) - enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | - MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); - - if (enable_srg) { - /* Start the sample generator */ - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6)); - } - - /* Enable transmitter and receiver */ - tx &= 1; - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w | tx); - - rx &= 1; - w = MCBSP_READ_CACHE(mcbsp, SPCR1); - MCBSP_WRITE(mcbsp, SPCR1, w | rx); - - /* - * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec - * REVISIT: 100us may give enough time for two CLKSRG, however - * due to some unknown PM related, clock gating etc. reason it - * is now at 500us. - */ - udelay(500); - - if (enable_srg) { - /* Start frame sync */ - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); - } - - if (mcbsp->pdata->has_ccr) { - /* Release the transmitter and receiver */ - w = MCBSP_READ_CACHE(mcbsp, XCCR); - w &= ~(tx ? XDISABLE : 0); - MCBSP_WRITE(mcbsp, XCCR, w); - w = MCBSP_READ_CACHE(mcbsp, RCCR); - w &= ~(rx ? RDISABLE : 0); - MCBSP_WRITE(mcbsp, RCCR, w); - } - - /* Dump McBSP Regs */ - omap_mcbsp_dump_reg(id); -} -EXPORT_SYMBOL(omap_mcbsp_start); - -void omap_mcbsp_stop(unsigned int id, int tx, int rx) -{ - struct omap_mcbsp *mcbsp; - int idle; - u16 w; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - - mcbsp = id_to_mcbsp_ptr(id); - - /* Reset transmitter */ - tx &= 1; - if (mcbsp->pdata->has_ccr) { - w = MCBSP_READ_CACHE(mcbsp, XCCR); - w |= (tx ? XDISABLE : 0); - MCBSP_WRITE(mcbsp, XCCR, w); - } - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w & ~tx); - - /* Reset receiver */ - rx &= 1; - if (mcbsp->pdata->has_ccr) { - w = MCBSP_READ_CACHE(mcbsp, RCCR); - w |= (rx ? RDISABLE : 0); - MCBSP_WRITE(mcbsp, RCCR, w); - } - w = MCBSP_READ_CACHE(mcbsp, SPCR1); - MCBSP_WRITE(mcbsp, SPCR1, w & ~rx); - - idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | - MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); - - if (idle) { - /* Reset the sample rate generator */ - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6)); - } - - if (mcbsp->st_data) - omap_st_stop(mcbsp); -} -EXPORT_SYMBOL(omap_mcbsp_stop); - -int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) -{ - struct omap_mcbsp *mcbsp; - const char *src; - - if (!omap_mcbsp_check_valid_id(id)) { - pr_err("%s: Invalid id (%d)\n", __func__, id + 1); - return -EINVAL; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (fck_src_id == MCBSP_CLKS_PAD_SRC) - src = "clks_ext"; - else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) - src = "clks_fclk"; - else - return -EINVAL; - - if (mcbsp->pdata->set_clk_src) - return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src); - else - return -EINVAL; -} -EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); - -void omap2_mcbsp1_mux_clkr_src(u8 mux) -{ - struct omap_mcbsp *mcbsp; - const char *src; - - if (mux == CLKR_SRC_CLKR) - src = "clkr"; - else if (mux == CLKR_SRC_CLKX) - src = "clkx"; - else - return; - - mcbsp = id_to_mcbsp_ptr(0); - if (mcbsp->pdata->mux_signal) - mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src); -} -EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src); - -void omap2_mcbsp1_mux_fsr_src(u8 mux) -{ - struct omap_mcbsp *mcbsp; - const char *src; - - if (mux == FSR_SRC_FSR) - src = "fsr"; - else if (mux == FSR_SRC_FSX) - src = "fsx"; - else - return; - - mcbsp = id_to_mcbsp_ptr(0); - if (mcbsp->pdata->mux_signal) - mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src); -} -EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src); - -#define max_thres(m) (mcbsp->pdata->buffer_size) -#define valid_threshold(m, val) ((val) <= max_thres(m)) -#define THRESHOLD_PROP_BUILDER(prop) \ -static ssize_t prop##_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%u\n", mcbsp->prop); \ -} \ - \ -static ssize_t prop##_store(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t size) \ -{ \ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ - unsigned long val; \ - int status; \ - \ - status = strict_strtoul(buf, 0, &val); \ - if (status) \ - return status; \ - \ - if (!valid_threshold(mcbsp, val)) \ - return -EDOM; \ - \ - mcbsp->prop = val; \ - return size; \ -} \ - \ -static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); - -THRESHOLD_PROP_BUILDER(max_tx_thres); -THRESHOLD_PROP_BUILDER(max_rx_thres); - -static const char *dma_op_modes[] = { - "element", "threshold", "frame", -}; - -static ssize_t dma_op_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - int dma_op_mode, i = 0; - ssize_t len = 0; - const char * const *s; - - dma_op_mode = mcbsp->dma_op_mode; - - for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) { - if (dma_op_mode == i) - len += sprintf(buf + len, "[%s] ", *s); - else - len += sprintf(buf + len, "%s ", *s); - } - len += sprintf(buf + len, "\n"); - - return len; -} - -static ssize_t dma_op_mode_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - const char * const *s; - int i = 0; - - for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) - if (sysfs_streq(buf, *s)) - break; - - if (i == ARRAY_SIZE(dma_op_modes)) - return -EINVAL; - - spin_lock_irq(&mcbsp->lock); - if (!mcbsp->free) { - size = -EBUSY; - goto unlock; - } - mcbsp->dma_op_mode = i; - -unlock: - spin_unlock_irq(&mcbsp->lock); - - return size; -} - -static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); - -static const struct attribute *additional_attrs[] = { - &dev_attr_max_tx_thres.attr, - &dev_attr_max_rx_thres.attr, - &dev_attr_dma_op_mode.attr, - NULL, -}; - -static const struct attribute_group additional_attr_group = { - .attrs = (struct attribute **)additional_attrs, -}; - -static ssize_t st_taps_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - ssize_t status = 0; - int i; - - spin_lock_irq(&mcbsp->lock); - for (i = 0; i < st_data->nr_taps; i++) - status += sprintf(&buf[status], (i ? ", %d" : "%d"), - st_data->taps[i]); - if (i) - status += sprintf(&buf[status], "\n"); - spin_unlock_irq(&mcbsp->lock); - - return status; -} - -static ssize_t st_taps_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - int val, tmp, status, i = 0; - - spin_lock_irq(&mcbsp->lock); - memset(st_data->taps, 0, sizeof(st_data->taps)); - st_data->nr_taps = 0; - - do { - status = sscanf(buf, "%d%n", &val, &tmp); - if (status < 0 || status == 0) { - size = -EINVAL; - goto out; - } - if (val < -32768 || val > 32767) { - size = -EINVAL; - goto out; - } - st_data->taps[i++] = val; - buf += tmp; - if (*buf != ',') - break; - buf++; - } while (1); - - st_data->nr_taps = i; - -out: - spin_unlock_irq(&mcbsp->lock); - - return size; -} - -static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store); - -static const struct attribute *sidetone_attrs[] = { - &dev_attr_st_taps.attr, - NULL, -}; - -static const struct attribute_group sidetone_attr_group = { - .attrs = (struct attribute **)sidetone_attrs, -}; - -static int __devinit omap_st_add(struct omap_mcbsp *mcbsp, - struct resource *res) -{ - struct omap_mcbsp_st_data *st_data; - int err; - - st_data = kzalloc(sizeof(*mcbsp->st_data), GFP_KERNEL); - if (!st_data) { - err = -ENOMEM; - goto err1; - } - - st_data->io_base_st = ioremap(res->start, resource_size(res)); - if (!st_data->io_base_st) { - err = -ENOMEM; - goto err2; - } - - err = sysfs_create_group(&mcbsp->dev->kobj, &sidetone_attr_group); - if (err) - goto err3; - - mcbsp->st_data = st_data; - return 0; - -err3: - iounmap(st_data->io_base_st); -err2: - kfree(st_data); -err1: - return err; - -} - -static void __devexit omap_st_remove(struct omap_mcbsp *mcbsp) -{ - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group); - iounmap(st_data->io_base_st); - kfree(st_data); -} - -/* - * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. - * 730 has only 2 McBSP, and both of them are MPU peripherals. - */ -static int __devinit omap_mcbsp_probe(struct platform_device *pdev) -{ - struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; - struct omap_mcbsp *mcbsp; - int id = pdev->id - 1; - struct resource *res; - int ret = 0; - - if (!pdata) { - dev_err(&pdev->dev, "McBSP device initialized without" - "platform data\n"); - ret = -EINVAL; - goto exit; - } - - dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id); - - if (id >= omap_mcbsp_count) { - dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id); - ret = -EINVAL; - goto exit; - } - - mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL); - if (!mcbsp) { - ret = -ENOMEM; - goto exit; - } - - spin_lock_init(&mcbsp->lock); - mcbsp->id = id + 1; - mcbsp->free = true; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); - if (!res) { - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "%s:mcbsp%d has invalid memory" - "resource\n", __func__, pdev->id); - ret = -ENOMEM; - goto exit; - } - } - mcbsp->phys_base = res->start; - mcbsp->reg_cache_size = resource_size(res); - mcbsp->io_base = ioremap(res->start, resource_size(res)); - if (!mcbsp->io_base) { - ret = -ENOMEM; - goto err_ioremap; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma"); - if (!res) - mcbsp->phys_dma_base = mcbsp->phys_base; - else - mcbsp->phys_dma_base = res->start; - - mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx"); - mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx"); - - /* From OMAP4 there will be a single irq line */ - if (mcbsp->tx_irq == -ENXIO) - mcbsp->tx_irq = platform_get_irq(pdev, 0); - - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!res) { - dev_err(&pdev->dev, "%s:mcbsp%d has invalid rx DMA channel\n", - __func__, pdev->id); - ret = -ENODEV; - goto err_res; - } - mcbsp->dma_rx_sync = res->start; - - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!res) { - dev_err(&pdev->dev, "%s:mcbsp%d has invalid tx DMA channel\n", - __func__, pdev->id); - ret = -ENODEV; - goto err_res; - } - mcbsp->dma_tx_sync = res->start; - - mcbsp->fclk = clk_get(&pdev->dev, "fck"); - if (IS_ERR(mcbsp->fclk)) { - ret = PTR_ERR(mcbsp->fclk); - dev_err(&pdev->dev, "unable to get fck: %d\n", ret); - goto err_res; - } - - mcbsp->pdata = pdata; - mcbsp->dev = &pdev->dev; - mcbsp_ptr[id] = mcbsp; - platform_set_drvdata(pdev, mcbsp); - pm_runtime_enable(mcbsp->dev); - - mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; - if (mcbsp->pdata->buffer_size) { - /* - * Initially configure the maximum thresholds to a safe value. - * The McBSP FIFO usage with these values should not go under - * 16 locations. - * If the whole FIFO without safety buffer is used, than there - * is a possibility that the DMA will be not able to push the - * new data on time, causing channel shifts in runtime. - */ - mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; - mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; - - ret = sysfs_create_group(&mcbsp->dev->kobj, - &additional_attr_group); - if (ret) { - dev_err(mcbsp->dev, - "Unable to create additional controls\n"); - goto err_thres; - } - } else { - mcbsp->max_tx_thres = -EINVAL; - mcbsp->max_rx_thres = -EINVAL; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone"); - if (res) { - ret = omap_st_add(mcbsp, res); - if (ret) { - dev_err(mcbsp->dev, - "Unable to create sidetone controls\n"); - goto err_st; - } - } - - return 0; - -err_st: - if (mcbsp->pdata->buffer_size) - sysfs_remove_group(&mcbsp->dev->kobj, - &additional_attr_group); -err_thres: - clk_put(mcbsp->fclk); -err_res: - iounmap(mcbsp->io_base); -err_ioremap: - kfree(mcbsp); -exit: - return ret; -} - -static int __devexit omap_mcbsp_remove(struct platform_device *pdev) -{ - struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - if (mcbsp) { - - if (mcbsp->pdata && mcbsp->pdata->ops && - mcbsp->pdata->ops->free) - mcbsp->pdata->ops->free(mcbsp->id); - - if (mcbsp->pdata->buffer_size) - sysfs_remove_group(&mcbsp->dev->kobj, - &additional_attr_group); - - if (mcbsp->st_data) - omap_st_remove(mcbsp); - - clk_put(mcbsp->fclk); - - iounmap(mcbsp->io_base); - kfree(mcbsp); - } - - return 0; -} - -static struct platform_driver omap_mcbsp_driver = { - .probe = omap_mcbsp_probe, - .remove = __devexit_p(omap_mcbsp_remove), - .driver = { - .name = "omap-mcbsp", - }, -}; - -int __init omap_mcbsp_init(void) -{ - /* Register the McBSP driver */ - return platform_driver_register(&omap_mcbsp_driver); -} diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 0d4aa0d5876c..cff8712122bb 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -26,8 +26,11 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/io.h> -#include <asm/system.h> #include <linux/spinlock.h> + +#include <asm/system.h> + +#include <plat/cpu.h> #include <plat/mux.h> #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 3dc3801aace4..5a97b4d98d41 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -319,7 +319,7 @@ int omap_pm_get_dev_context_loss_count(struct device *dev) if (WARN_ON(!dev)) return -ENODEV; - if (dev->parent == &omap_device_parent) { + if (dev->pm_domain == &omap_device_pm_domain) { count = omap_device_get_context_loss_count(pdev); } else { WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device", diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index e8d98693d2dd..d50cbc6385bd 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -1,3 +1,4 @@ + /* * omap_device implementation * @@ -97,14 +98,7 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 -static int omap_device_register(struct platform_device *pdev); static int omap_early_device_register(struct platform_device *pdev); -static struct omap_device *omap_device_alloc(struct platform_device *pdev, - struct omap_hwmod **ohs, int oh_cnt, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt); -static void omap_device_delete(struct omap_device *od); - static struct omap_device_pm_latency omap_default_latency[] = { { @@ -320,8 +314,6 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od, } -static struct dev_pm_domain omap_device_pm_domain; - /** * omap_device_build_from_dt - build an omap_device with multiple hwmods * @pdev_name: name of the platform_device driver to use @@ -348,7 +340,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) { - dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n"); + dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n"); return -ENODEV; } @@ -509,7 +501,7 @@ static int omap_device_fill_resources(struct omap_device *od, * * Returns an struct omap_device pointer or ERR_PTR() on error; */ -static struct omap_device *omap_device_alloc(struct platform_device *pdev, +struct omap_device *omap_device_alloc(struct platform_device *pdev, struct omap_hwmod **ohs, int oh_cnt, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt) @@ -591,7 +583,7 @@ oda_exit1: return ERR_PTR(ret); } -static void omap_device_delete(struct omap_device *od) +void omap_device_delete(struct omap_device *od) { if (!od) return; @@ -619,7 +611,7 @@ static void omap_device_delete(struct omap_device *od) * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise, * passes along the return value of omap_device_build_ss(). */ -struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, +struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id, struct omap_hwmod *oh, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, @@ -652,7 +644,7 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, * platform_device record. Returns an ERR_PTR() on error, or passes * along the return value of omap_device_register(). */ -struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, +struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_hwmod **ohs, int oh_cnt, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, @@ -717,7 +709,7 @@ odbs_exit: * platform_early_add_device() on the underlying platform_device. * Returns 0 by default. */ -static int omap_early_device_register(struct platform_device *pdev) +static int __init omap_early_device_register(struct platform_device *pdev) { struct platform_device *devices[1]; @@ -762,14 +754,12 @@ static int _od_suspend_noirq(struct device *dev) struct omap_device *od = to_omap_device(pdev); int ret; - if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND) - return pm_generic_suspend_noirq(dev); - ret = pm_generic_suspend_noirq(dev); if (!ret && !pm_runtime_status_suspended(dev)) { if (pm_generic_runtime_suspend(dev) == 0) { - omap_device_idle(pdev); + if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)) + omap_device_idle(pdev); od->flags |= OMAP_DEVICE_SUSPENDED; } } @@ -782,13 +772,11 @@ static int _od_resume_noirq(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); - if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND) - return pm_generic_resume_noirq(dev); - if ((od->flags & OMAP_DEVICE_SUSPENDED) && !pm_runtime_status_suspended(dev)) { od->flags &= ~OMAP_DEVICE_SUSPENDED; - omap_device_enable(pdev); + if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)) + omap_device_enable(pdev); pm_generic_runtime_resume(dev); } @@ -799,7 +787,7 @@ static int _od_resume_noirq(struct device *dev) #define _od_resume_noirq NULL #endif -static struct dev_pm_domain omap_device_pm_domain = { +struct dev_pm_domain omap_device_pm_domain = { .ops = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, _od_runtime_idle) @@ -817,11 +805,10 @@ static struct dev_pm_domain omap_device_pm_domain = { * platform_device_register() on the underlying platform_device. * Returns the return value of platform_device_register(). */ -static int omap_device_register(struct platform_device *pdev) +int omap_device_register(struct platform_device *pdev) { pr_debug("omap_device: %s: registering\n", pdev->name); - pdev->dev.parent = &omap_device_parent; pdev->dev.pm_domain = &omap_device_pm_domain; return platform_device_add(pdev); } @@ -1130,11 +1117,6 @@ int omap_device_enable_clocks(struct omap_device *od) return 0; } -struct device omap_device_parent = { - .init_name = "omap", - .parent = &platform_bus, -}; - static struct notifier_block platform_nb = { .notifier_call = _omap_device_notifier_call, }; @@ -1142,6 +1124,6 @@ static struct notifier_block platform_nb = { static int __init omap_device_init(void) { bus_register_notifier(&platform_bus_type, &platform_nb); - return device_register(&omap_device_parent); + return 0; } core_initcall(omap_device_init); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4243bdcc87bc..eec98afa0f83 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -31,11 +31,10 @@ #include "sram.h" -/* XXX These "sideways" includes are a sign that something is wrong */ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -# include "../mach-omap2/prm2xxx_3xxx.h" -# include "../mach-omap2/sdrc.h" -#endif +/* XXX These "sideways" includes will disappear when sram.c becomes a driver */ +#include "../mach-omap2/iomap.h" +#include "../mach-omap2/prm2xxx_3xxx.h" +#include "../mach-omap2/sdrc.h" #define OMAP1_SRAM_PA 0x20000000 #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) @@ -86,7 +85,7 @@ static int is_sram_locked(void) __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ } - if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx() && !cpu_is_am33xx()) { __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ @@ -124,7 +123,10 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x800; /* 2K */ } } else { - if (cpu_is_omap34xx()) { + if (cpu_is_am33xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap34xx()) { omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ } else if (cpu_is_omap44xx()) { @@ -368,6 +370,11 @@ static inline int omap34xx_sram_init(void) return 0; } +static inline int am33xx_sram_init(void) +{ + return 0; +} + int __init omap_sram_init(void) { omap_detect_sram(); @@ -379,6 +386,8 @@ int __init omap_sram_init(void) omap242x_sram_init(); else if (cpu_is_omap2430()) omap243x_sram_init(); + else if (cpu_is_am33xx()) + am33xx_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init(); diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index f3570884883e..d2bbfd1cb0b5 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -29,6 +29,10 @@ #include <plat/usb.h> #include <plat/board.h> +#include <mach/hardware.h> + +#include "../mach-omap2/common.h" + #ifdef CONFIG_ARCH_OMAP_OTG void __init diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 089899a7db72..74daf5ed1432 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -21,6 +21,7 @@ #include <plat/orion_wdt.h> #include <plat/mv_xor.h> #include <plat/ehci-orion.h> +#include <mach/bridge-regs.h> /* Fill in the resources structure and link it into the platform device structure. There is always a memory region, and nearly @@ -568,13 +569,17 @@ void __init orion_spi_1_init(unsigned long mapbase, ****************************************************************************/ static struct orion_wdt_platform_data orion_wdt_data; +static struct resource orion_wdt_resource = + DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28); + static struct platform_device orion_wdt_device = { .name = "orion_wdt", .id = -1, .dev = { .platform_data = &orion_wdt_data, }, - .num_resources = 0, + .resource = &orion_wdt_resource, + .num_resources = 1, }; void __init orion_wdt_init(unsigned long tclk) diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h index 885f8abd927b..d6a55bd2e578 100644 --- a/arch/arm/plat-orion/include/plat/audio.h +++ b/arch/arm/plat-orion/include/plat/audio.h @@ -2,7 +2,6 @@ #define __PLAT_AUDIO_H struct kirkwood_asoc_platform_data { - u32 tclk; int burst; }; #endif diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c index 2d3c19d7c7b1..79ef102e3b2b 100644 --- a/arch/arm/plat-pxa/dma.c +++ b/arch/arm/plat-pxa/dma.c @@ -20,7 +20,6 @@ #include <linux/errno.h> #include <linux/dma-mapping.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/memory.h> #include <mach/hardware.h> diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index d8973ac46bc4..21bf6adb9198 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -4,7 +4,7 @@ config PLAT_S3C24XX bool - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB @@ -44,12 +44,6 @@ config S3C2410_CLOCK Clock code for the S3C2410, and similar processors which is currently includes the S3C2410, S3C2440, S3C2442. -config S3C2443_CLOCK - bool - help - Clock code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. - config S3C24XX_DCLK bool help @@ -76,15 +70,9 @@ config S3C24XX_GPIO_EXTRA128 Add an extra 128 gpio numbers to the available GPIO pool. This is available for boards that need extra gpios for external devices. -config PM_SIMTEC - bool - help - Common power management code for systems that are - compatible with the Simtec style of power management - -config S3C2410_DMA +config S3C24XX_DMA bool "S3C2410 DMA support" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which @@ -93,31 +81,11 @@ config S3C2410_DMA config S3C2410_DMA_DEBUG bool "S3C2410 DMA support debug" - depends on ARCH_S3C2410 && S3C2410_DMA + depends on ARCH_S3C24XX && S3C2410_DMA help Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. -# SPI default pin configuration code - -config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13 - bool - help - SPI GPIO configuration code for BUS0 when connected to - GPE11, GPE12 and GPE13. - -config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPG5, GPG6 and GPG7. - -config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPD8, GPD9 and GPD10. - # common code for s3c24xx based machines, such as the SMDKs. # cpu frequency items common between s3c2410 and s3c2440/s3c2442 @@ -145,21 +113,4 @@ config S3C2412_IOTIMING Intel node to select io timing code that is common to the s3c2412 and the s3c2443. -config MACH_SMDK - bool - help - Common machine code for SMDK2410 and SMDK2440 - -config S3C24XX_SIMTEC_AUDIO - bool - depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) - default y - help - Add audio devices for common Simtec S3C24XX boards - -config S3C2410_SETUP_TS - bool - help - Compile in platform device definition for Samsung TouchScreen. - endif diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index b2b01125de66..2467b800cc76 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,28 +23,11 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o # Architecture dependent builds -obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o -obj-$(CONFIG_S3C2443_CLOCK) += s3c2443-clock.o -obj-$(CONFIG_S3C2410_DMA) += dma.o +obj-$(CONFIG_S3C24XX_DMA) += dma.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o - -# device specific setup and/or initialisation -obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o -obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o - -# SPI gpio central GPIO functions - -obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o - -# machine common support - -obj-$(CONFIG_MACH_SMDK) += common-smdk.o -obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 21f1fda8b661..0db73ae646bc 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -32,8 +32,10 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/regs-clock.h> #include <asm/irq.h> #include <asm/cacheflush.h> +#include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -190,8 +192,34 @@ static unsigned long s3c24xx_read_idcode_v4(void) return __raw_readl(S3C2410_GSTATUS1); } +static void s3c24xx_default_idle(void) +{ + unsigned long tmp; + int i; + + /* idle the system by using the idle mode which will wait for an + * interrupt to happen before restarting the system. + */ + + /* Warning: going into idle state upsets jtag scanning */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); + + /* the samsung port seems to do a loop and then unset idle.. */ + for (i = 0; i < 50; i++) + tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ + + /* this bit is not cleared on re-start... */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); +} + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { + arm_pm_idle = s3c24xx_default_idle; + /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 2bab4c99a234..28f898f75380 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -27,7 +27,6 @@ #include <linux/errno.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/irq.h> #include <mach/hardware.h> #include <mach/dma.h> diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c deleted file mode 100644 index 704175b0573f..000000000000 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <mach/spi.h> -#include <mach/regs-gpio.h> - -void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); - s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); - s3c2410_gpio_pullup(S3C2410_GPE(11), 0); - s3c2410_gpio_pullup(S3C2410_GPE(13), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c deleted file mode 100644 index 72457afd6255..000000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <mach/spi.h> -#include <mach/regs-gpio.h> - -void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, - int enable) -{ - - printk(KERN_INFO "%s(%d)\n", __func__, enable); - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPD(10), 0); - s3c2410_gpio_pullup(S3C2410_GPD(9), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c deleted file mode 100644 index c3972b645d13..000000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <mach/spi.h> -#include <mach/regs-gpio.h> - -void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPG(5), 0); - s3c2410_gpio_pullup(S3C2410_GPG(6), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 8167ce66188c..96bea3202304 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -9,8 +9,8 @@ config PLAT_S5P bool depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) default y - select ARM_VIC if !ARCH_EXYNOS4 - select ARM_GIC if ARCH_EXYNOS4 + select ARM_VIC if !ARCH_EXYNOS + select ARM_GIC if ARCH_EXYNOS select GIC_NON_BANKED if ARCH_EXYNOS4 select NO_IOPORT select ARCH_REQUIRE_GPIOLIB @@ -40,6 +40,10 @@ config S5P_HRT help Use the High Resolution timer support +config S5P_DEV_UART + def_bool y + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) + config S5P_PM bool help @@ -80,6 +84,16 @@ config S5P_DEV_FIMC3 help Compile in platform device definitions for FIMC controller 3 +config S5P_DEV_JPEG + bool + help + Compile in platform device definitions for JPEG codec + +config S5P_DEV_G2D + bool + help + Compile in platform device definitions for G2D device + config S5P_DEV_FIMD0 bool help diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 30d8c3016e6b..4bd824136659 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -12,7 +12,6 @@ obj- := # Core files -obj-y += dev-uart.o obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o @@ -23,5 +22,7 @@ obj-$(CONFIG_S5P_SLEEP) += sleep.o obj-$(CONFIG_S5P_HRT) += s5p-time.o # devices + +obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 963edea7f7e7..f68a9bb11948 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -61,6 +61,20 @@ struct clk clk_fout_apll = { .id = -1, }; +/* BPLL clock output */ + +struct clk clk_fout_bpll = { + .name = "fout_bpll", + .id = -1, +}; + +/* CPLL clock output */ + +struct clk clk_fout_cpll = { + .name = "fout_cpll", + .id = -1, +}; + /* MPLL clock output * No need .ctrlbit, this is always on */ @@ -101,6 +115,28 @@ struct clksrc_sources clk_src_apll = { .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; +/* Possible clock sources for BPLL Mux */ +static struct clk *clk_src_bpll_list[] = { + [0] = &clk_fin_bpll, + [1] = &clk_fout_bpll, +}; + +struct clksrc_sources clk_src_bpll = { + .sources = clk_src_bpll_list, + .nr_sources = ARRAY_SIZE(clk_src_bpll_list), +}; + +/* Possible clock sources for CPLL Mux */ +static struct clk *clk_src_cpll_list[] = { + [0] = &clk_fin_cpll, + [1] = &clk_fout_cpll, +}; + +struct clksrc_sources clk_src_cpll = { + .sources = clk_src_cpll_list, + .nr_sources = ARRAY_SIZE(clk_src_cpll_list), +}; + /* Possible clock sources for MPLL Mux */ static struct clk *clk_src_mpll_list[] = { [0] = &clk_fin_mpll, diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c index c496b359c371..139c050918c5 100644 --- a/arch/arm/plat-s5p/irq-eint.c +++ b/arch/arm/plat-s5p/irq-eint.c @@ -200,7 +200,7 @@ static struct irq_chip s5p_irq_vic_eint = { #endif }; -int __init s5p_init_irq_eint(void) +static int __init s5p_init_irq_eint(void) { int irq; diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 1fdfaa4599ce..82c7311017a2 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -41,7 +41,7 @@ struct s5p_gpioint_bank { void (*handler)(unsigned int, struct irq_desc *); }; -LIST_HEAD(banks); +static LIST_HEAD(banks); static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type) { diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c index 327acb3a4464..d1bfecae6c9f 100644 --- a/arch/arm/plat-s5p/irq-pm.c +++ b/arch/arm/plat-s5p/irq-pm.c @@ -39,19 +39,32 @@ unsigned long s3c_irqwake_eintallow = 0xffffffffL; int s3c_irq_wake(struct irq_data *data, unsigned int state) { unsigned long irqbit; + unsigned int irq_rtc_tic, irq_rtc_alarm; + +#ifdef CONFIG_ARCH_EXYNOS + if (soc_is_exynos5250()) { + irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC; + irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM; + } else { + irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC; + irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM; + } +#else + irq_rtc_tic = IRQ_RTC_TIC; + irq_rtc_alarm = IRQ_RTC_ALARM; +#endif + + if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) { + irqbit = 1 << (data->irq + 1 - irq_rtc_alarm); - switch (data->irq) { - case IRQ_RTC_TIC: - case IRQ_RTC_ALARM: - irqbit = 1 << (data->irq + 1 - IRQ_RTC_ALARM); if (!state) s3c_irqwake_intmask |= irqbit; else s3c_irqwake_intmask &= ~irqbit; - break; - default: + } else { return -ENOENT; } + return 0; } diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-s5p/sleep.S index 0fd591bfc9fd..006bd01eda02 100644 --- a/arch/arm/plat-s5p/sleep.S +++ b/arch/arm/plat-s5p/sleep.S @@ -23,9 +23,18 @@ */ #include <linux/linkage.h> -#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> - .text +/* + * The following code is located into the .data section. This is to + * allow l2x0_regs_phys to be accessed with a relative load while we + * can't rely on any MMU translation. We could have put l2x0_regs_phys + * in the .text section as well, but some setups might insist on it to + * be truly read-only. (Reference from: arch/arm/kernel/sleep.S) + */ + .data + .align /* * sleep magic, to allow the bootloader to check for an valid @@ -39,11 +48,34 @@ * s3c_cpu_resume * * resume code entry for bootloader to call - * - * we must put this code here in the data segment as we have no - * other way of restoring the stack pointer after sleep, and we - * must not write to the code segment (code is read-only) */ ENTRY(s3c_cpu_resume) +#ifdef CONFIG_CACHE_L2X0 + adr r0, l2x0_regs_phys + ldr r0, [r0] + ldr r1, [r0, #L2X0_R_PHY_BASE] + ldr r2, [r1, #L2X0_CTRL] + tst r2, #0x1 + bne resume_l2on + ldr r2, [r0, #L2X0_R_AUX_CTRL] + str r2, [r1, #L2X0_AUX_CTRL] + ldr r2, [r0, #L2X0_R_TAG_LATENCY] + str r2, [r1, #L2X0_TAG_LATENCY_CTRL] + ldr r2, [r0, #L2X0_R_DATA_LATENCY] + str r2, [r1, #L2X0_DATA_LATENCY_CTRL] + ldr r2, [r0, #L2X0_R_PREFETCH_CTRL] + str r2, [r1, #L2X0_PREFETCH_CTRL] + ldr r2, [r0, #L2X0_R_PWR_CTRL] + str r2, [r1, #L2X0_POWER_CTRL] + mov r2, #1 + str r2, [r1, #L2X0_CTRL] +resume_l2on: +#endif b cpu_resume +ENDPROC(s3c_cpu_resume) +#ifdef CONFIG_CACHE_L2X0 + .globl l2x0_regs_phys +l2x0_regs_phys: + .long 0 +#endif diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 6a2abe67c8b2..71553f410016 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -205,7 +205,7 @@ config S3C_DEV_USB_HSOTG config S3C_DEV_WDT bool - default y if ARCH_S3C2410 + default y if ARCH_S3C24XX help Complie in platform device definition for Watchdog Timer @@ -264,7 +264,7 @@ config SAMSUNG_DEV_KEYPAD config SAMSUNG_DEV_PWM bool - default y if ARCH_S3C2410 + default y if ARCH_S3C24XX help Compile in platform device definition for PWM Timer diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 10f71179071f..65c5eca475e7 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -84,31 +84,35 @@ static int clk_null_enable(struct clk *clk, int enable) int clk_enable(struct clk *clk) { + unsigned long flags; + if (IS_ERR(clk) || clk == NULL) return -EINVAL; clk_enable(clk->parent); - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); if ((clk->usage++) == 0) (clk->enable)(clk, 1); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return 0; } void clk_disable(struct clk *clk) { + unsigned long flags; + if (IS_ERR(clk) || clk == NULL) return; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); if ((--clk->usage) == 0) (clk->enable)(clk, 0); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); clk_disable(clk->parent); } diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c index 81c06d44c11e..46b426e8aff5 100644 --- a/arch/arm/plat-samsung/cpu.c +++ b/arch/arm/plat-samsung/cpu.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/io.h> -#include <asm/system.h> #include <mach/map.h> #include <plat/cpu.h> diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index a976c023b286..5f197dcaf10c 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -77,7 +77,7 @@ static struct platform_device samsung_dfl_bl_device __initdata = { * @gpio_info: structure containing GPIO info for PWM timer * @bl_data: structure containing Backlight control data */ -void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, +void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, struct platform_pwm_backlight_data *bl_data) { int ret = 0; @@ -115,6 +115,8 @@ void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data->init = bl_data->init; if (bl_data->notify) samsung_bl_data->notify = bl_data->notify; + if (bl_data->notify_after) + samsung_bl_data->notify_after = bl_data->notify_after; if (bl_data->exit) samsung_bl_data->exit = bl_data->exit; if (bl_data->check_fb) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index d21d744e4d99..8b928f9bc1c3 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -57,6 +57,7 @@ #include <plat/sdhci.h> #include <plat/ts.h> #include <plat/udc.h> +#include <plat/udc-hs.h> #include <plat/usb-control.h> #include <plat/usb-phy.h> #include <plat/regs-iic.h> @@ -267,6 +268,52 @@ struct platform_device s5p_device_fimc3 = { }; #endif /* CONFIG_S5P_DEV_FIMC3 */ +/* G2D */ + +#ifdef CONFIG_S5P_DEV_G2D +static struct resource s5p_g2d_resource[] = { + [0] = { + .start = S5P_PA_G2D, + .end = S5P_PA_G2D + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_2D, + .end = IRQ_2D, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s5p_device_g2d = { + .name = "s5p-g2d", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_g2d_resource), + .resource = s5p_g2d_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; +#endif /* CONFIG_S5P_DEV_G2D */ + +#ifdef CONFIG_S5P_DEV_JPEG +static struct resource s5p_jpeg_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_JPEG, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_JPEG), +}; + +struct platform_device s5p_device_jpeg = { + .name = "s5p-jpeg", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_jpeg_resource), + .resource = s5p_jpeg_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; +#endif /* CONFIG_S5P_DEV_JPEG */ + /* FIMD0 */ #ifdef CONFIG_S5P_DEV_FIMD0 @@ -744,17 +791,6 @@ struct platform_device s3c_device_iis = { }; #endif /* CONFIG_PLAT_S3C24XX */ -#ifdef CONFIG_CPU_S3C2440 -struct platform_device s3c2412_device_iis = { - .name = "s3c2412-iis", - .id = -1, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; -#endif /* CONFIG_CPU_S3C2440 */ - /* IDE CFCON */ #ifdef CONFIG_SAMSUNG_DEV_IDE @@ -769,7 +805,7 @@ struct platform_device s3c_device_cfcon = { .resource = s3c_cfcon_resource, }; -void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata) +void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata) { s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata), &s3c_device_cfcon); @@ -887,7 +923,7 @@ struct platform_device s5p_device_mfc_r = { #ifdef CONFIG_S5P_DEV_CSIS0 static struct resource s5p_mipi_csis0_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_4K), + [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_16K), [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0), }; @@ -901,7 +937,7 @@ struct platform_device s5p_device_mipi_csis0 = { #ifdef CONFIG_S5P_DEV_CSIS1 static struct resource s5p_mipi_csis1_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_4K), + [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_16K), [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1), }; @@ -1049,7 +1085,7 @@ struct platform_device s3c64xx_device_onenand1 = { .resource = s3c64xx_onenand1_resources, }; -void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata) +void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata) { s3c_set_platdata(pdata, sizeof(struct onenand_platform_data), &s3c64xx_device_onenand1); @@ -1078,7 +1114,7 @@ static struct resource s5p_pmu_resource[] = { DEFINE_RES_IRQ(IRQ_PMU) }; -struct platform_device s5p_device_pmu = { +static struct platform_device s5p_device_pmu = { .name = "arm-pmu", .id = ARM_PMU_DEVICE_CPU, .num_resources = ARRAY_SIZE(s5p_pmu_resource), @@ -1423,6 +1459,19 @@ struct platform_device s3c_device_usb_hsotg = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; + +void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd) +{ + struct s3c_hsotg_plat *npd; + + npd = s3c_set_platdata(pd, sizeof(struct s3c_hsotg_plat), + &s3c_device_usb_hsotg); + + if (!npd->phy_init) + npd->phy_init = s5p_usb_phy_init; + if (!npd->phy_exit) + npd->phy_exit = s5p_usb_phy_exit; +} #endif /* CONFIG_S3C_DEV_USB_HSOTG */ /* USB High Spped 2.0 Device (Gadget) */ diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 0747c77a2fd5..301d9c319d0b 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -116,7 +116,7 @@ static inline int samsung_dmadev_flush(unsigned ch) return dmaengine_terminate_all((struct dma_chan *)ch); } -struct samsung_dma_ops dmadev_ops = { +static struct samsung_dma_ops dmadev_ops = { .request = samsung_dmadev_request, .release = samsung_dmadev_release, .prepare = samsung_dmadev_prepare, diff --git a/arch/arm/plat-samsung/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h index 5345364e7420..376af5286a3e 100644 --- a/arch/arm/plat-samsung/include/plat/audio-simtec.h +++ b/arch/arm/plat-samsung/include/plat/audio-simtec.h @@ -32,6 +32,3 @@ struct s3c24xx_audio_simtec_pdata { void (*startup)(void); }; - -extern int simtec_audio_add(const char *codec_name, bool has_lr_routing, - struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 73c66d4d10fa..a62753dc15ba 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -79,6 +79,10 @@ extern struct clk clk_epll; extern struct clk clk_xtal; extern struct clk clk_ext; +/* S3C2443/S3C2416 specific clocks */ +extern struct clksrc_clk clk_epllref; +extern struct clksrc_clk clk_esysclk; + /* S3C64XX specific clocks */ extern struct clk clk_h2; extern struct clk clk_27m; @@ -114,7 +118,23 @@ extern void s3c24xx_setup_clocks(unsigned long fclk, extern void s3c2410_setup_clocks(void); extern void s3c2412_setup_clocks(void); extern void s3c244x_setup_clocks(void); -extern void s3c2443_setup_clocks(void); + +/* S3C2410 specific clock functions */ + +extern int s3c2410_baseclk_add(void); + +/* S3C2443/S3C2416 specific clock functions */ + +typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); + +extern void s3c2443_common_setup_clocks(pll_fn get_mpll); +extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, + unsigned int *divs, int nr_divs, + int divmask); + +extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); /* S3C64XX specific functions and clocks */ diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 73cb3cfd0685..787ceaca0be8 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -42,6 +42,9 @@ extern unsigned long samsung_cpu_id; #define EXYNOS4412_CPU_ID 0xE4412200 #define EXYNOS4_CPU_MASK 0xFFFE0000 +#define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5_SOC_MASK 0xFFFFF000 + #define IS_SAMSUNG_CPU(name, id, mask) \ static inline int is_samsung_##name(void) \ { \ @@ -58,6 +61,7 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ @@ -120,6 +124,12 @@ IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) #define EXYNOS4210_REV_1_0 (0x10) #define EXYNOS4210_REV_1_1 (0x11) +#if defined(CONFIG_SOC_EXYNOS5250) +# define soc_is_exynos5250() is_samsung_exynos5250() +#else +# define soc_is_exynos5250() 0 +#endif + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 4214ea0ff8fe..2155d4af62a3 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -26,6 +26,8 @@ struct s3c24xx_uart_resources { extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; extern struct s3c24xx_uart_resources s3c64xx_uart_resources[]; extern struct s3c24xx_uart_resources s5p_uart_resources[]; +extern struct s3c24xx_uart_resources exynos4_uart_resources[]; +extern struct s3c24xx_uart_resources exynos5_uart_resources[]; extern struct platform_device *s3c24xx_uart_devs[]; extern struct platform_device *s3c24xx_uart_src[]; @@ -79,6 +81,8 @@ extern struct platform_device s5p_device_fimc1; extern struct platform_device s5p_device_fimc2; extern struct platform_device s5p_device_fimc3; extern struct platform_device s5p_device_fimc_md; +extern struct platform_device s5p_device_jpeg; +extern struct platform_device s5p_device_g2d; extern struct platform_device s5p_device_fimd0; extern struct platform_device s5p_device_hdmi; extern struct platform_device s5p_device_i2c_hdmiphy; diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index c5eaad529de5..0670f37aaaed 100644 --- a/arch/arm/plat-samsung/include/plat/dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -82,6 +82,22 @@ enum dma_ch { DMACH_SLIMBUS4_TX, DMACH_SLIMBUS5_RX, DMACH_SLIMBUS5_TX, + DMACH_MIPI_HSI0, + DMACH_MIPI_HSI1, + DMACH_MIPI_HSI2, + DMACH_MIPI_HSI3, + DMACH_MIPI_HSI4, + DMACH_MIPI_HSI5, + DMACH_MIPI_HSI6, + DMACH_MIPI_HSI7, + DMACH_MTOM_0, + DMACH_MTOM_1, + DMACH_MTOM_2, + DMACH_MTOM_3, + DMACH_MTOM_4, + DMACH_MTOM_5, + DMACH_MTOM_6, + DMACH_MTOM_7, /* END Marker, also used to denote a reserved channel */ DMACH_MAX, }; diff --git a/arch/arm/plat-samsung/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h index 178bccbe4804..a7d622ef16af 100644 --- a/arch/arm/plat-samsung/include/plat/regs-dma.h +++ b/arch/arm/plat-samsung/include/plat/regs-dma.h @@ -119,7 +119,7 @@ #define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) #endif /* CONFIG_CPU_S3C2412 */ -#ifdef CONFIG_CPU_S3C2443 +#if defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2443) #define S3C2443_DMAREQSEL_SRC(x) ((x) << 1) diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h index 8f39aa5b26ea..9a78012d6f43 100644 --- a/arch/arm/plat-samsung/include/plat/regs-fb.h +++ b/arch/arm/plat-samsung/include/plat/regs-fb.h @@ -91,6 +91,9 @@ #define VIDCON1_VSTATUS_BACKPORCH (0x1 << 13) #define VIDCON1_VSTATUS_ACTIVE (0x2 << 13) #define VIDCON1_VSTATUS_FRONTPORCH (0x0 << 13) +#define VIDCON1_VCLK_MASK (0x3 << 9) +#define VIDCON1_VCLK_HOLD (0x0 << 9) +#define VIDCON1_VCLK_RUN (0x1 << 9) #define VIDCON1_INV_VCLK (1 << 7) #define VIDCON1_INV_HSYNC (1 << 6) @@ -164,15 +167,17 @@ #define VIDTCON1_HSPW(_x) ((_x) << 0) #define VIDTCON2 (0x18) +#define VIDTCON2_LINEVAL_E(_x) ((((_x) & 0x800) >> 11) << 23) #define VIDTCON2_LINEVAL_MASK (0x7ff << 11) #define VIDTCON2_LINEVAL_SHIFT (11) #define VIDTCON2_LINEVAL_LIMIT (0x7ff) -#define VIDTCON2_LINEVAL(_x) ((_x) << 11) +#define VIDTCON2_LINEVAL(_x) (((_x) & 0x7ff) << 11) +#define VIDTCON2_HOZVAL_E(_x) ((((_x) & 0x800) >> 11) << 22) #define VIDTCON2_HOZVAL_MASK (0x7ff << 0) #define VIDTCON2_HOZVAL_SHIFT (0) #define VIDTCON2_HOZVAL_LIMIT (0x7ff) -#define VIDTCON2_HOZVAL(_x) ((_x) << 0) +#define VIDTCON2_HOZVAL(_x) (((_x) & 0x7ff) << 0) /* WINCONx */ @@ -228,25 +233,29 @@ /* Local input channels (windows 0-2) */ #define SHADOWCON_CHx_LOCAL_ENABLE(_win) (1 << (5 + (_win))) +#define VIDOSDxA_TOPLEFT_X_E(_x) ((((_x) & 0x800) >> 11) << 23) #define VIDOSDxA_TOPLEFT_X_MASK (0x7ff << 11) #define VIDOSDxA_TOPLEFT_X_SHIFT (11) #define VIDOSDxA_TOPLEFT_X_LIMIT (0x7ff) -#define VIDOSDxA_TOPLEFT_X(_x) ((_x) << 11) +#define VIDOSDxA_TOPLEFT_X(_x) (((_x) & 0x7ff) << 11) +#define VIDOSDxA_TOPLEFT_Y_E(_x) ((((_x) & 0x800) >> 11) << 22) #define VIDOSDxA_TOPLEFT_Y_MASK (0x7ff << 0) #define VIDOSDxA_TOPLEFT_Y_SHIFT (0) #define VIDOSDxA_TOPLEFT_Y_LIMIT (0x7ff) -#define VIDOSDxA_TOPLEFT_Y(_x) ((_x) << 0) +#define VIDOSDxA_TOPLEFT_Y(_x) (((_x) & 0x7ff) << 0) +#define VIDOSDxB_BOTRIGHT_X_E(_x) ((((_x) & 0x800) >> 11) << 23) #define VIDOSDxB_BOTRIGHT_X_MASK (0x7ff << 11) #define VIDOSDxB_BOTRIGHT_X_SHIFT (11) #define VIDOSDxB_BOTRIGHT_X_LIMIT (0x7ff) -#define VIDOSDxB_BOTRIGHT_X(_x) ((_x) << 11) +#define VIDOSDxB_BOTRIGHT_X(_x) (((_x) & 0x7ff) << 11) +#define VIDOSDxB_BOTRIGHT_Y_E(_x) ((((_x) & 0x800) >> 11) << 22) #define VIDOSDxB_BOTRIGHT_Y_MASK (0x7ff << 0) #define VIDOSDxB_BOTRIGHT_Y_SHIFT (0) #define VIDOSDxB_BOTRIGHT_Y_LIMIT (0x7ff) -#define VIDOSDxB_BOTRIGHT_Y(_x) ((_x) << 0) +#define VIDOSDxB_BOTRIGHT_Y(_x) (((_x) & 0x7ff) << 0) /* For VIDOSD[1..4]C */ #define VIDISD14C_ALPHA0_R(_x) ((_x) << 20) @@ -278,15 +287,17 @@ #define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) #define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) +#define VIDW_BUF_SIZE_OFFSET_E(_x) ((((_x) & 0x2000) >> 13) << 27) #define VIDW_BUF_SIZE_OFFSET_MASK (0x1fff << 13) #define VIDW_BUF_SIZE_OFFSET_SHIFT (13) #define VIDW_BUF_SIZE_OFFSET_LIMIT (0x1fff) -#define VIDW_BUF_SIZE_OFFSET(_x) ((_x) << 13) +#define VIDW_BUF_SIZE_OFFSET(_x) (((_x) & 0x1fff) << 13) +#define VIDW_BUF_SIZE_PAGEWIDTH_E(_x) ((((_x) & 0x2000) >> 13) << 26) #define VIDW_BUF_SIZE_PAGEWIDTH_MASK (0x1fff << 0) #define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT (0) #define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT (0x1fff) -#define VIDW_BUF_SIZE_PAGEWIDTH(_x) ((_x) << 0) +#define VIDW_BUF_SIZE_PAGEWIDTH(_x) (((_x) & 0x1fff) << 0) /* Interrupt controls and status */ @@ -384,3 +395,9 @@ #define WPALCON_W0PAL_16BPP_A555 (0x5 << 0) #define WPALCON_W0PAL_16BPP_565 (0x6 << 0) +/* Blending equation control */ +#define BLENDCON (0x260) +#define BLENDCON_NEW_MASK (1 << 0) +#define BLENDCON_NEW_8BIT_ALPHA_VALUE (1 << 0) +#define BLENDCON_NEW_4BIT_ALPHA_VALUE (0 << 0) + diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h index 30b7cc14cef5..0f8263e93eea 100644 --- a/arch/arm/plat-samsung/include/plat/regs-rtc.h +++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h @@ -18,51 +18,54 @@ #define S3C2410_INTP_ALM (1 << 1) #define S3C2410_INTP_TIC (1 << 0) -#define S3C2410_RTCCON S3C2410_RTCREG(0x40) -#define S3C2410_RTCCON_RTCEN (1<<0) -#define S3C2410_RTCCON_CLKSEL (1<<1) -#define S3C2410_RTCCON_CNTSEL (1<<2) -#define S3C2410_RTCCON_CLKRST (1<<3) -#define S3C64XX_RTCCON_TICEN (1<<8) +#define S3C2410_RTCCON S3C2410_RTCREG(0x40) +#define S3C2410_RTCCON_RTCEN (1 << 0) +#define S3C2410_RTCCON_CNTSEL (1 << 2) +#define S3C2410_RTCCON_CLKRST (1 << 3) +#define S3C2443_RTCCON_TICSEL (1 << 4) +#define S3C64XX_RTCCON_TICEN (1 << 8) -#define S3C64XX_RTCCON_TICMSK (0xF<<7) -#define S3C64XX_RTCCON_TICSHT (7) +#define S3C2410_TICNT S3C2410_RTCREG(0x44) +#define S3C2410_TICNT_ENABLE (1 << 7) -#define S3C2410_TICNT S3C2410_RTCREG(0x44) -#define S3C2410_TICNT_ENABLE (1<<7) +/* S3C2443: tick count is 15 bit wide + * TICNT[6:0] contains upper 7 bits + * TICNT1[7:0] contains lower 8 bits + */ +#define S3C2443_TICNT_PART(x) ((x & 0x7f00) >> 8) +#define S3C2443_TICNT1 S3C2410_RTCREG(0x4C) +#define S3C2443_TICNT1_PART(x) (x & 0xff) -#define S3C2410_RTCALM S3C2410_RTCREG(0x50) -#define S3C2410_RTCALM_ALMEN (1<<6) -#define S3C2410_RTCALM_YEAREN (1<<5) -#define S3C2410_RTCALM_MONEN (1<<4) -#define S3C2410_RTCALM_DAYEN (1<<3) -#define S3C2410_RTCALM_HOUREN (1<<2) -#define S3C2410_RTCALM_MINEN (1<<1) -#define S3C2410_RTCALM_SECEN (1<<0) +/* S3C2416: tick count is 32 bit wide + * TICNT[6:0] contains bits [14:8] + * TICNT1[7:0] contains lower 8 bits + * TICNT2[16:0] contains upper 17 bits + */ +#define S3C2416_TICNT2 S3C2410_RTCREG(0x48) +#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15) -#define S3C2410_RTCALM_ALL \ - S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\ - S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\ - S3C2410_RTCALM_SECEN +#define S3C2410_RTCALM S3C2410_RTCREG(0x50) +#define S3C2410_RTCALM_ALMEN (1 << 6) +#define S3C2410_RTCALM_YEAREN (1 << 5) +#define S3C2410_RTCALM_MONEN (1 << 4) +#define S3C2410_RTCALM_DAYEN (1 << 3) +#define S3C2410_RTCALM_HOUREN (1 << 2) +#define S3C2410_RTCALM_MINEN (1 << 1) +#define S3C2410_RTCALM_SECEN (1 << 0) +#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) +#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) +#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) -#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) -#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) -#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) - -#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) -#define S3C2410_ALMMON S3C2410_RTCREG(0x64) -#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) - -#define S3C2410_RTCRST S3C2410_RTCREG(0x6c) - -#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) -#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) -#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) -#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) -#define S3C2410_RTCDAY S3C2410_RTCREG(0x80) -#define S3C2410_RTCMON S3C2410_RTCREG(0x84) -#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) +#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) +#define S3C2410_ALMMON S3C2410_RTCREG(0x64) +#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) +#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) +#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) +#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) +#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) +#define S3C2410_RTCMON S3C2410_RTCREG(0x84) +#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) #endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h index a111ad871833..fcf279662067 100644 --- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h +++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h @@ -25,8 +25,9 @@ #define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY) #define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00) -#define SRC_PHYPWR_OTG_DISABLE (1 << 4) -#define SRC_PHYPWR_ANALOG_POWERDOWN (1 << 3) +#define S3C_PHYPWR_NORMAL_MASK (0x19 << 0) +#define S3C_PHYPWR_OTG_DISABLE (1 << 4) +#define S3C_PHYPWR_ANALOG_POWERDOWN (1 << 3) #define SRC_PHYPWR_FORCE_SUSPEND (1 << 1) #define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04) @@ -42,7 +43,7 @@ #define S3C_RSTCON S3C_HSOTG_PHYREG(0x08) #define S3C_RSTCON_PHYCLK (1 << 2) -#define S3C_RSTCON_HCLK (1 << 2) +#define S3C_RSTCON_HCLK (1 << 1) #define S3C_RSTCON_PHY (1 << 0) #define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20) diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/plat-samsung/include/plat/rtc-core.h new file mode 100644 index 000000000000..21d8594d37ca --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/rtc-core.h @@ -0,0 +1,27 @@ +/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h + * + * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> + * + * Samsung RTC Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_RTC_CORE_H +#define __ASM_PLAT_RTC_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_rtc_setname(char *name) +{ +#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) + s3c_device_rtc.name = name; +#endif +} + +#endif /* __ASM_PLAT_RTC_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h index 3986497dd3f7..55b0e5f51e97 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/s3c2410.h @@ -29,5 +29,3 @@ extern void s3c2410_init_clocks(int xtal); #define s3c2410_init NULL #define s3c2410a_init NULL #endif - -extern int s3c2410_baseclk_add(void); diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h index dce05b43d51c..a5b794ff838b 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2443.h +++ b/arch/arm/plat-samsung/include/plat/s3c2443.h @@ -32,23 +32,3 @@ extern void s3c2443_restart(char mode, const char *cmd); #define s3c2443_init NULL #define s3c2443_restart NULL #endif - -/* common code used by s3c2443 and others. - * note, not to be used outside of arch/arm/mach-s3c* */ - -struct clk; /* some files don't need clk.h otherwise */ - -typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); - -extern void s3c2443_common_setup_clocks(pll_fn get_mpll); -extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask); - -extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); -extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); -extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); - -extern struct clksrc_clk clk_epllref; -extern struct clksrc_clk clk_esysclk; -extern struct clksrc_clk clk_msysclk; diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h index 984bf9e7bc89..1de4b32f98e9 100644 --- a/arch/arm/plat-samsung/include/plat/s5p-clock.h +++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h @@ -18,6 +18,8 @@ #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) #define clk_fin_apll clk_ext_xtal_mux +#define clk_fin_bpll clk_ext_xtal_mux +#define clk_fin_cpll clk_ext_xtal_mux #define clk_fin_mpll clk_ext_xtal_mux #define clk_fin_epll clk_ext_xtal_mux #define clk_fin_dpll clk_ext_xtal_mux @@ -29,6 +31,8 @@ extern struct clk clk_xusbxti; extern struct clk clk_48m; extern struct clk s5p_clk_27m; extern struct clk clk_fout_apll; +extern struct clk clk_fout_bpll; +extern struct clk clk_fout_cpll; extern struct clk clk_fout_mpll; extern struct clk clk_fout_epll; extern struct clk clk_fout_dpll; @@ -37,6 +41,8 @@ extern struct clk clk_arm; extern struct clk clk_vpll; extern struct clksrc_sources clk_src_apll; +extern struct clksrc_sources clk_src_bpll; +extern struct clksrc_sources clk_src_cpll; extern struct clksrc_sources clk_src_mpll; extern struct clksrc_sources clk_src_epll; extern struct clksrc_sources clk_src_dpll; diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index f82f888b91a9..317e246ffc56 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -40,6 +40,7 @@ enum clk_types { * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI * @max_width: The maximum number of data bits supported. * @host_caps: Standard MMC host capabilities bit field. + * @host_caps2: The second standard MMC host capabilities bit field. * @cd_type: Type of Card Detection method (see cd_types enum above) * @clk_type: Type of clock divider method (see clk_types enum above) * @ext_cd_init: Initialize external card detect subsystem. Called on @@ -63,6 +64,7 @@ enum clk_types { struct s3c_sdhci_platdata { unsigned int max_width; unsigned int host_caps; + unsigned int host_caps2; unsigned int pm_caps; enum cd_types cd_type; enum clk_types clk_type; diff --git a/arch/arm/plat-samsung/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h index a22a4f2eea94..c9e3667cb2b1 100644 --- a/arch/arm/plat-samsung/include/plat/udc-hs.h +++ b/arch/arm/plat-samsung/include/plat/udc-hs.h @@ -26,4 +26,9 @@ enum s3c_hsotg_dmamode { struct s3c_hsotg_plat { enum s3c_hsotg_dmamode dma; unsigned int is_osc : 1; + + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); }; + +extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd); diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index ee48e12a1e72..7e068d182c3d 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -37,7 +37,9 @@ static void arch_detect_cpu(void); /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) +#ifdef S3C_PA_UART #define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT) +#endif static __inline__ void uart_wr(unsigned int reg, unsigned int val) diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index 51583cd30164..f980cf3d2baa 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <mach/map.h> +#include <plat/cpu.h> #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> @@ -57,6 +58,21 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) struct irq_chip_type *ct; unsigned int i; +#ifdef CONFIG_ARCH_EXYNOS + if (soc_is_exynos5250()) { + pirq[0] = EXYNOS5_IRQ_TIMER0_VIC; + pirq[1] = EXYNOS5_IRQ_TIMER1_VIC; + pirq[2] = EXYNOS5_IRQ_TIMER2_VIC; + pirq[3] = EXYNOS5_IRQ_TIMER3_VIC; + pirq[4] = EXYNOS5_IRQ_TIMER4_VIC; + } else { + pirq[0] = EXYNOS4_IRQ_TIMER0_VIC; + pirq[1] = EXYNOS4_IRQ_TIMER1_VIC; + pirq[2] = EXYNOS4_IRQ_TIMER2_VIC; + pirq[3] = EXYNOS4_IRQ_TIMER3_VIC; + pirq[4] = EXYNOS4_IRQ_TIMER4_VIC; + } +#endif s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, S3C64XX_TINT_CSTAT, handle_level_irq); diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c index 0f707184eae0..fa78aa710ed1 100644 --- a/arch/arm/plat-samsung/platformdata.c +++ b/arch/arm/plat-samsung/platformdata.c @@ -53,6 +53,8 @@ void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, set->cfg_gpio = pd->cfg_gpio; if (pd->host_caps) set->host_caps |= pd->host_caps; + if (pd->host_caps2) + set->host_caps2 |= pd->host_caps2; if (pd->pm_caps) set->pm_caps |= pd->pm_caps; if (pd->clk_type) diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c index e3bb806bbafe..4dcb11c3d894 100644 --- a/arch/arm/plat-samsung/time.c +++ b/arch/arm/plat-samsung/time.c @@ -28,7 +28,6 @@ #include <linux/io.h> #include <linux/platform_device.h> -#include <asm/system.h> #include <asm/leds.h> #include <asm/mach-types.h> diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h index 68b5394fc583..c16cc31ecbed 100644 --- a/arch/arm/plat-spear/include/plat/keyboard.h +++ b/arch/arm/plat-spear/include/plat/keyboard.h @@ -15,7 +15,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/types.h> -#define DECLARE_KEYMAP(_name) \ +#define DECLARE_9x9_KEYMAP(_name) \ int _name[] = { \ KEY(0, 0, KEY_ESC), \ KEY(0, 1, KEY_1), \ @@ -62,24 +62,6 @@ int _name[] = { \ KEY(4, 6, KEY_Z), \ KEY(4, 7, KEY_X), \ KEY(4, 8, KEY_C), \ - KEY(4, 0, KEY_L), \ - KEY(4, 1, KEY_SEMICOLON), \ - KEY(4, 2, KEY_APOSTROPHE), \ - KEY(4, 3, KEY_GRAVE), \ - KEY(4, 4, KEY_LEFTSHIFT), \ - KEY(4, 5, KEY_BACKSLASH), \ - KEY(4, 6, KEY_Z), \ - KEY(4, 7, KEY_X), \ - KEY(4, 8, KEY_C), \ - KEY(4, 0, KEY_L), \ - KEY(4, 1, KEY_SEMICOLON), \ - KEY(4, 2, KEY_APOSTROPHE), \ - KEY(4, 3, KEY_GRAVE), \ - KEY(4, 4, KEY_LEFTSHIFT), \ - KEY(4, 5, KEY_BACKSLASH), \ - KEY(4, 6, KEY_Z), \ - KEY(4, 7, KEY_X), \ - KEY(4, 8, KEY_C), \ KEY(5, 0, KEY_V), \ KEY(5, 1, KEY_B), \ KEY(5, 2, KEY_N), \ @@ -118,10 +100,55 @@ int _name[] = { \ KEY(8, 8, KEY_KP0), \ } +#define DECLARE_6x6_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_RESERVED), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(1, 0, KEY_Q), \ + KEY(1, 1, KEY_W), \ + KEY(1, 2, KEY_E), \ + KEY(1, 3, KEY_R), \ + KEY(1, 4, KEY_T), \ + KEY(1, 5, KEY_Y), \ + KEY(2, 0, KEY_D), \ + KEY(2, 1, KEY_F), \ + KEY(2, 2, KEY_G), \ + KEY(2, 3, KEY_H), \ + KEY(2, 4, KEY_J), \ + KEY(2, 5, KEY_K), \ + KEY(3, 0, KEY_B), \ + KEY(3, 1, KEY_N), \ + KEY(3, 2, KEY_M), \ + KEY(3, 3, KEY_COMMA), \ + KEY(3, 4, KEY_DOT), \ + KEY(3, 5, KEY_SLASH), \ + KEY(4, 0, KEY_F6), \ + KEY(4, 1, KEY_F7), \ + KEY(4, 2, KEY_F8), \ + KEY(4, 3, KEY_F9), \ + KEY(4, 4, KEY_F10), \ + KEY(4, 5, KEY_NUMLOCK), \ + KEY(5, 0, KEY_KP2), \ + KEY(5, 1, KEY_KP3), \ + KEY(5, 2, KEY_KP0), \ + KEY(5, 3, KEY_KPDOT), \ + KEY(5, 4, KEY_RO), \ + KEY(5, 5, KEY_ZENKAKUHANKAKU), \ +} + +#define KEYPAD_9x9 0 +#define KEYPAD_6x6 1 +#define KEYPAD_2x2 2 + /** * struct kbd_platform_data - spear keyboard platform data * keymap: pointer to keymap data (table and size) * rep: enables key autorepeat + * mode: choose keyboard support(9x9, 6x6, 2x2) * * This structure is supposed to be used by platform code to supply * keymaps to drivers that implement keyboards. @@ -129,6 +156,7 @@ int _name[] = { \ struct kbd_platform_data { const struct matrix_keymap_data *keymap; bool rep; + unsigned int mode; }; /* This function is used to set platform data field of pdev->dev */ diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h deleted file mode 100644 index 86c6f83b44cc..000000000000 --- a/arch/arm/plat-spear/include/plat/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/system.h - * - * SPEAr platform specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_SYSTEM_H -#define __PLAT_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif /* __PLAT_SYSTEM_H */ diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index 2b4e3d82957c..16f203e78d89 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ #include <linux/io.h> +#include <asm/system_misc.h> #include <asm/hardware/sp810.h> #include <mach/hardware.h> #include <mach/generic.h> diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 69714db47c33..a5cb1945bdcc 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,5 +1,4 @@ obj-y := clock.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o diff --git a/arch/arm/plat-versatile/localtimer.c b/arch/arm/plat-versatile/localtimer.c deleted file mode 100644 index 0fb3961999b5..000000000000 --- a/arch/arm/plat-versatile/localtimer.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/arch/arm/plat-versatile/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/clockchips.h> - -#include <asm/smp_twd.h> -#include <asm/localtimer.h> -#include <mach/irqs.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); - return 0; -} diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 8f3ccddbdafd..858748eaa144 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -18,7 +18,9 @@ #include <linux/smp.h> #include <linux/init.h> +#include <asm/cp15.h> #include <asm/cputype.h> +#include <asm/system_info.h> #include <asm/thread_notify.h> #include <asm/vfp.h> |