diff options
Diffstat (limited to 'arch/arm64/boot')
19 files changed, 765 insertions, 230 deletions
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 0d7bfbf7d922..3f94bce33b7f 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -5,12 +5,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 0cbe24b49710..5d995f7724af 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -83,6 +83,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; cpu1: cpu@1 { @@ -91,6 +92,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; cpu2: cpu@2 { @@ -99,6 +101,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; cpu3: cpu@3 { @@ -107,6 +110,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; }; l2: l2-cache0 { @@ -171,6 +175,28 @@ }; }; + scpi { + compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; + mboxes = <&mailbox 1 &mailbox 2>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + + scpi_clocks: clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: scpi_clocks@0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>; + clock-output-names = "vcpu"; + }; + }; + + scpi_sensors: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -229,6 +255,14 @@ status = "disabled"; }; + saradc: adc@8680 { + compatible = "amlogic,meson-saradc"; + reg = <0x0 0x8680 0x0 0x34>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + pwm_ef: pwm@86c0 { compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; reg = <0x0 0x086c0 0x0 0x10>; @@ -282,6 +316,25 @@ #address-cells = <0>; }; + sram: sram@c8000000 { + compatible = "amlogic,meson-gxbb-sram", "mmio-sram"; + reg = <0x0 0xc8000000 0x0 0x14000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xc8000000 0x14000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "amlogic,meson-gxbb-scp-shmem"; + reg = <0x13000 0x400>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "amlogic,meson-gxbb-scp-shmem"; + reg = <0x13400 0x400>; + }; + }; + aobus: aobus@c8100000 { compatible = "simple-bus"; reg = <0x0 0xc8100000 0x0 0x100000>; @@ -297,6 +350,21 @@ status = "disabled"; }; + uart_AO_B: serial@4e0 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x004e0 0x0 0x14>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + pwm_AO_ab: pwm@550 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x00550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + ir: ir@580 { compatible = "amlogic,meson-gxbb-ir"; reg = <0x0 0x00580 0x0 0x40>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 03e3d76626dd..fc0e86cb4cde 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -45,10 +45,55 @@ /dts-v1/; #include "meson-gxbb-p20x.dtsi" +#include <dt-bindings/input/input.h> / { compatible = "amlogic,p200", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P200 Development Board"; + + avdd18_usb_adc: regulator-avdd18_usb_adc { + compatible = "regulator-fixed"; + regulator-name = "AVDD18_USB_ADC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + adc_keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-home { + label = "Home"; + linux,code = <KEY_HOME>; + press-threshold-microvolt = <900000>; /* 50% */ + }; + + button-esc { + label = "Esc"; + linux,code = <KEY_ESC>; + press-threshold-microvolt = <684000>; /* 38% */ + }; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <468000>; /* 26% */ + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <252000>; /* 14% */ + }; + + button-menu { + label = "Menu"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <0>; /* 0% */ + }; + }; }; &i2c_B { @@ -56,3 +101,8 @@ pinctrl-0 = <&i2c_b_pins>; pinctrl-names = "default"; }; + +&saradc { + status = "okay"; + vref-supply = <&avdd18_usb_adc>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index e59ad308192f..86709929fd20 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -53,6 +53,17 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + + blue { + label = "vega-s95:blue:on"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; + usb_vbus: regulator-usb0-vbus { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts new file mode 100644 index 000000000000..56f855901262 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxbb-p20x.dtsi" + +/ { + compatible = "wetek,hub", "amlogic,meson-gxbb"; + model = "WeTek Hub"; + + leds { + compatible = "gpio-leds"; + + system { + label = "wetek-play:system-status"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; + + cvbs-connector { + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts new file mode 100644 index 000000000000..ea79fdd2c248 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxbb-p20x.dtsi" +#include <dt-bindings/input/input.h> + +/ { + compatible = "wetek,play2", "amlogic,meson-gxbb"; + model = "WeTek Play 2"; + + leds { + compatible = "gpio-leds"; + + system { + label = "wetek-play:system-status"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + + wifi { + label = "wetek-play:wifi-status"; + gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + ethernet { + label = "wetek-play:ethernet-status"; + gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index b35307321b63..04b3324bc132 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -50,28 +50,6 @@ / { compatible = "amlogic,meson-gxbb"; - scpi { - compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; - mboxes = <&mailbox 1 &mailbox 2>; - shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - - scpi_clocks: clocks { - compatible = "arm,scpi-clocks"; - - scpi_dvfs: scpi_clocks@0 { - compatible = "arm,scpi-dvfs-clocks"; - #clock-cells = <1>; - clock-indices = <0>; - clock-output-names = "vcpu"; - }; - }; - - scpi_sensors: sensors { - compatible = "arm,scpi-sensors"; - #thermal-sensor-cells = <1>; - }; - }; - soc { usb0_phy: phy@c0000000 { compatible = "amlogic,meson-gxbb-usb2-phy"; @@ -93,25 +71,6 @@ status = "disabled"; }; - sram: sram@c8000000 { - compatible = "amlogic,meson-gxbb-sram", "mmio-sram"; - reg = <0x0 0xc8000000 0x0 0x14000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0xc8000000 0x14000>; - - cpu_scp_lpri: scp-shmem@0 { - compatible = "amlogic,meson-gxbb-scp-shmem"; - reg = <0x13000 0x400>; - }; - - cpu_scp_hpri: scp-shmem@200 { - compatible = "amlogic,meson-gxbb-scp-shmem"; - reg = <0x13400 0x400>; - }; - }; - usb0: usb@c9000000 { compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; reg = <0x0 0xc9000000 0x0 0x40000>; @@ -138,22 +97,6 @@ }; }; -&cpu0 { - clocks = <&scpi_dvfs 0>; -}; - -&cpu1 { - clocks = <&scpi_dvfs 0>; -}; - -&cpu2 { - clocks = <&scpi_dvfs 0>; -}; - -&cpu3 { - clocks = <&scpi_dvfs 0>; -}; - &cbus { spifc: spi@8c80 { compatible = "amlogic,meson-gxbb-spifc"; @@ -195,6 +138,29 @@ }; }; + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { + mux { + groups = "uart_cts_ao_a", + "uart_rts_ao_a"; + function = "uart_ao"; + }; + }; + + uart_ao_b_pins: uart_ao_b { + mux { + groups = "uart_tx_ao_b", "uart_rx_ao_b"; + function = "uart_ao_b"; + }; + }; + + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { + mux { + groups = "uart_cts_ao_b", + "uart_rts_ao_b"; + function = "uart_ao_b"; + }; + }; + remote_input_ao_pins: remote_input_ao { mux { groups = "remote_input_ao"; @@ -340,6 +306,14 @@ }; }; + uart_a_cts_rts_pins: uart_a_cts_rts { + mux { + groups = "uart_cts_a", + "uart_rts_a"; + function = "uart_a"; + }; + }; + uart_b_pins: uart_b { mux { groups = "uart_tx_b", @@ -348,6 +322,14 @@ }; }; + uart_b_cts_rts_pins: uart_b_cts_rts { + mux { + groups = "uart_cts_b", + "uart_rts_b"; + function = "uart_b"; + }; + }; + uart_c_pins: uart_c { mux { groups = "uart_tx_c", @@ -356,6 +338,14 @@ }; }; + uart_c_cts_rts_pins: uart_c_cts_rts { + mux { + groups = "uart_cts_c", + "uart_rts_c"; + function = "uart_c"; + }; + }; + i2c_a_pins: i2c_a { mux { groups = "i2c_sck_a", @@ -463,6 +453,20 @@ function = "pwm_f_y"; }; }; + + hdmi_hpd_pins: hdmi_hpd { + mux { + groups = "hdmi_hpd"; + function = "hdmi_hpd"; + }; + }; + + hdmi_i2c_pins: hdmi_i2c { + mux { + groups = "hdmi_sda", "hdmi_scl"; + function = "hdmi_i2c"; + }; + }; }; }; @@ -486,6 +490,16 @@ clocks = <&clkc CLKID_I2C>; }; +&saradc { + compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc"; + clocks = <&xtal>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>, + <&clkc CLKID_SAR_ADC_CLK>, + <&clkc CLKID_SAR_ADC_SEL>; + clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; +}; + &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index cea4a3eded9b..cea4a3eded9b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 69216246275d..fe11b5fc61f7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -88,12 +88,42 @@ }; }; + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { + mux { + groups = "uart_cts_ao_a", + "uart_rts_ao_a"; + function = "uart_ao"; + }; + }; + + uart_ao_b_pins: uart_ao_b { + mux { + groups = "uart_tx_ao_b", "uart_rx_ao_b"; + function = "uart_ao_b"; + }; + }; + + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { + mux { + groups = "uart_cts_ao_b", + "uart_rts_ao_b"; + function = "uart_ao_b"; + }; + }; + remote_input_ao_pins: remote_input_ao { mux { groups = "remote_input_ao"; function = "remote_input_ao"; }; }; + + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + }; + }; }; }; @@ -163,6 +193,14 @@ }; }; + uart_a_cts_rts_pins: uart_a_cts_rts { + mux { + groups = "uart_cts_a", + "uart_rts_a"; + function = "uart_a"; + }; + }; + uart_b_pins: uart_b { mux { groups = "uart_tx_b", @@ -171,6 +209,14 @@ }; }; + uart_b_cts_rts_pins: uart_b_cts_rts { + mux { + groups = "uart_cts_b", + "uart_rts_b"; + function = "uart_b"; + }; + }; + uart_c_pins: uart_c { mux { groups = "uart_tx_c", @@ -179,6 +225,14 @@ }; }; + uart_c_cts_rts_pins: uart_c_cts_rts { + mux { + groups = "uart_cts_c", + "uart_rts_c"; + function = "uart_c"; + }; + }; + i2c_a_pins: i2c_a { mux { groups = "i2c_sck_a", @@ -229,6 +283,20 @@ function = "pwm_e"; }; }; + + hdmi_hpd_pins: hdmi_hpd { + mux { + groups = "hdmi_hpd"; + function = "hdmi_hpd"; + }; + }; + + hdmi_i2c_pins: hdmi_i2c { + mux { + groups = "hdmi_sda", "hdmi_scl"; + function = "hdmi_i2c"; + }; + }; }; eth-phy-mux { @@ -279,6 +347,16 @@ clocks = <&clkc CLKID_I2C>; }; +&saradc { + compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; + clocks = <&xtal>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>, + <&clkc CLKID_SAR_ADC_CLK>, + <&clkc CLKID_SAR_ADC_SEL>; + clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; +}; + &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 5dbc66088355..5dbc66088355 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts index 95e11d7faab8..95e11d7faab8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index eb2f0c3e5e53..ddea7305c644 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -85,6 +85,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 1>; }; cpu5: cpu@101 { @@ -93,6 +94,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 1>; }; cpu6: cpu@102 { @@ -101,6 +103,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 1>; }; cpu7: cpu@103 { @@ -109,10 +112,21 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&l2>; + clocks = <&scpi_dvfs 1>; }; }; }; +&saradc { + compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc"; +}; + +&scpi_dvfs { + clock-indices = <0 1>; + clock-output-names = "vbig", "vlittle"; +}; + &vpu { compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; }; + diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 9d799d938d2f..df539e865b90 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -372,12 +372,13 @@ }; }; - coresight-replicator { - /* - * Non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-replicator"; + replicator@20120000 { + compatible = "qcom,coresight-replicator1x", "arm,primecell"; + reg = <0 0x20120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 53fd0683d400..098ad557fee3 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -217,18 +217,6 @@ assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; }; -&cmu_disp { - assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, - <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>, - <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, - <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; - assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, - <0>, - <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, - <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; - assigned-clock-rates = <0>, <400000000>; -}; - &cmu_fsys { assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, <&cmu_top CLK_MOUT_SCLK_USBHOST30>, diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index ddba2f889326..dea0a6f5bc18 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -18,6 +18,40 @@ compatible = "samsung,tm2", "samsung,exynos5433"; }; +&cmu_disp { + /* + * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned + * clocks properties for DISP CMU for each board to keep them together + * for easier review and maintenance. + */ + assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>, + <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>, + <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>, + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>, + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>, + <&cmu_disp CLK_MOUT_DISP_PLL>, + <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; + assigned-clock-parents = <0>, <0>, + <&cmu_mif CLK_ACLK_DISP_333>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>, + <&cmu_disp CLK_FOUT_DISP_PLL>, + <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; + assigned-clock-rates = <250000000>, <400000000>; +}; + &hsi2c_9 { status = "okay"; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 2fbf3a860316..7891a31adc17 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -18,6 +18,40 @@ compatible = "samsung,tm2e", "samsung,exynos5433"; }; +&cmu_disp { + /* + * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned + * clocks properties for DISP CMU for each board to keep them together + * for easier review and maintenance. + */ + assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>, + <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>, + <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>, + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>, + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>, + <&cmu_disp CLK_MOUT_DISP_PLL>, + <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; + assigned-clock-parents = <0>, <0>, + <&cmu_mif CLK_ACLK_DISP_333>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>, + <&cmu_disp CLK_FOUT_DISP_PLL>, + <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; + assigned-clock-rates = <278000000>, <400000000>; +}; + &ldo31_reg { regulator-name = "TSP_VDD_1.8V_AP"; regulator-min-microvolt = <1800000>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index c528dd52ba2d..e5892bb0ae6e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -13,6 +13,7 @@ #include "exynos7.dtsi" #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Exynos7 Espresso board based on EXYNOS7"; @@ -32,6 +33,29 @@ device_type = "memory"; reg = <0x0 0x40000000 0x0 0xC0000000>; }; + + usb30_vbus_reg: regulator-usb30 { + compatible = "regulator-fixed"; + regulator-name = "VBUS_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph1 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_vbus_en>; + enable-active-high; + }; + + usb3drd_boost_5v: regulator-usb3drd-boost { + compatible = "regulator-fixed"; + regulator-name = "VUSB_VBUS_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3drd_boost_en>; + enable-active-high; + }; + }; &fin_pll { @@ -328,8 +352,8 @@ &pinctrl_alive { pmic_irq: pmic-irq { samsung,pins = "gpa0-2"; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; }; @@ -365,3 +389,24 @@ vqmmc-supply = <&ldo2_reg>; disable-wp; }; + +&pinctrl_bus1 { + usb30_vbus_en: usb30-vbus-en { + samsung,pins = "gph1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + usb3drd_boost_en: usb3drd-boost-en { + samsung,pins = "gpf4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&usbdrd_phy { + vbus-supply = <&usb30_vbus_reg>; + vbus-boost-supply = <&usb3drd_boost_5v>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index 7ebb93927f13..8f58850cd28c 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -12,6 +12,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/pinctrl/samsung.h> + &pinctrl_alive { gpa0: gpa0 { gpio-controller; @@ -187,163 +189,163 @@ hs_i2c10_bus: hs-i2c10-bus { samsung,pins = "gpb0-1", "gpb0-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hs_i2c11_bus: hs-i2c11-bus { samsung,pins = "gpb0-3", "gpb0-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hs_i2c2_bus: hs-i2c2-bus { samsung,pins = "gpd0-3", "gpd0-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; uart0_data: uart0-data { samsung,pins = "gpd0-0", "gpd0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; uart0_fctl: uart0-fctl { samsung,pins = "gpd0-2", "gpd0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; uart2_data: uart2-data { samsung,pins = "gpd1-4", "gpd1-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hs_i2c3_bus: hs-i2c3-bus { samsung,pins = "gpd1-3", "gpd1-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; uart1_data: uart1-data { samsung,pins = "gpd1-0", "gpd1-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; uart1_fctl: uart1-fctl { samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hs_i2c0_bus: hs-i2c0-bus { samsung,pins = "gpd2-1", "gpd2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hs_i2c1_bus: hs-i2c1-bus { samsung,pins = "gpd2-3", "gpd2-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hs_i2c9_bus: hs-i2c9-bus { samsung,pins = "gpd2-7", "gpd2-6"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; pwm0_out: pwm0-out { samsung,pins = "gpd2-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; pwm1_out: pwm1-out { samsung,pins = "gpd2-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; pwm2_out: pwm2-out { samsung,pins = "gpd2-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; pwm3_out: pwm3-out { samsung,pins = "gpd2-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hs_i2c8_bus: hs-i2c8-bus { samsung,pins = "gpd5-3", "gpd5-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; uart3_data: uart3-data { samsung,pins = "gpd5-0", "gpd5-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; spi2_bus: spi2-bus { samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; spi1_bus: spi1-bus { samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; spi0_bus: spi0-bus { samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hs_i2c4_bus: hs-i2c4-bus { samsung,pins = "gpg3-1", "gpg3-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hs_i2c5_bus: hs-i2c5-bus { samsung,pins = "gpg3-3", "gpg3-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; }; @@ -358,9 +360,9 @@ hs_i2c6_bus: hs-i2c6-bus { samsung,pins = "gpj0-1", "gpj0-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; }; @@ -375,9 +377,9 @@ hs_i2c7_bus: hs-i2c7-bus { samsung,pins = "gpj1-1", "gpj1-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; }; @@ -392,9 +394,9 @@ spi3_bus: spi3-bus { samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; }; @@ -409,9 +411,9 @@ spi4_bus: spi4-bus { samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; }; @@ -426,37 +428,37 @@ sd2_clk: sd2-clk { samsung,pins = "gpr4-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; sd2_cmd: sd2-cmd { samsung,pins = "gpr4-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; sd2_cd: sd2-cd { samsung,pins = "gpr4-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; sd2_bus1: sd2-bus-width1 { samsung,pins = "gpr4-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; sd2_bus4: sd2-bus-width4 { samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; }; @@ -495,107 +497,107 @@ sd0_clk: sd0-clk { samsung,pins = "gpr0-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <4>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; sd0_cmd: sd0-cmd { samsung,pins = "gpr0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <4>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; sd0_ds: sd0-ds { samsung,pins = "gpr0-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <4>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; sd0_qrdy: sd0-qrdy { samsung,pins = "gpr0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <4>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; sd0_bus1: sd0-bus-width1 { samsung,pins = "gpr1-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <4>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; sd0_bus4: sd0-bus-width4 { samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <4>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; sd0_bus8: sd0-bus-width8 { samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <4>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>; }; sd1_clk: sd1-clk { samsung,pins = "gpr2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <2>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; }; sd1_cmd: sd1-cmd { samsung,pins = "gpr2-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <2>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; }; sd1_ds: sd1-ds { samsung,pins = "gpr2-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <6>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>; }; sd1_qrdy: sd1-qrdy { samsung,pins = "gpr2-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <6>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>; }; sd1_int: sd1-int { samsung,pins = "gpr2-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <6>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>; }; sd1_bus1: sd1-bus-width1 { samsung,pins = "gpr3-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <2>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; }; sd1_bus4: sd1-bus-width4 { samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <2>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; }; sd1_bus8: sd1-bus-width8 { samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <2>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>; }; }; @@ -682,22 +684,22 @@ spi5_bus: spi5-bus { samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; ufs_refclk_out: ufs-refclk-out { samsung,pins = "gpg2-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <2>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; }; ufs_rst_n: ufs-rst-n { samsung,pins = "gph1-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 80aa60e38237..9a3fbed1765a 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -603,6 +603,40 @@ #include "exynos7-trip-points.dtsi" }; }; + + usbdrd_phy: phy@15500000 { + compatible = "samsung,exynos7-usbdrd-phy"; + reg = <0x15500000 0x100>; + clocks = <&clock_fsys0 ACLK_USBDRD300>, + <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>, + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>, + <&clock_fsys0 SCLK_USBDRD300_REFCLK>; + clock-names = "phy", "ref", "phy_pipe", + "phy_utmi", "itp"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + + usbdrd3 { + compatible = "samsung,exynos7-dwusb3"; + clocks = <&clock_fsys0 ACLK_USBDRD300>, + <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, + <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>; + clock-names = "usbdrd30", "usbdrd30_susp_clk", + "usbdrd30_axius_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3@15400000 { + compatible = "snps,dwc3"; + reg = <0x15400000 0x10000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; }; }; |