diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mm.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mm.dtsi | 151 |
1 files changed, 120 insertions, 31 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 6b407a94c06e..232a7412755a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -53,6 +53,8 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; A53_1: cpu@1 { @@ -100,14 +102,23 @@ opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <850000>; + opp-supported-hw = <0xe>, <0x7>; clock-latency-ns = <150000>; }; opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; + opp-supported-hw = <0xc>, <0x7>; + clock-latency-ns = <150000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1000000>; + /* Consumer only but rely on speed grading */ + opp-supported-hw = <0x8>, <0x7>; clock-latency-ns = <150000>; - opp-suspend; }; }; @@ -158,15 +169,6 @@ clock-output-names = "clk_ext4"; }; - gic: interrupt-controller@38800000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ - <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -189,7 +191,23 @@ arm,no-tick-in-suspend; }; - soc { + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -199,13 +217,80 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30000000 0x30000000 0x400000>; + + sai1: sai@30010000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai2: sai@30020000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, + <&clk IMX8MM_CLK_SAI2_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, + <&clk IMX8MM_CLK_SAI3_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30050000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, + <&clk IMX8MM_CLK_SAI5_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai6: sai@30060000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI6_IPG>, + <&clk IMX8MM_CLK_SAI6_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; gpio1: gpio@30200000 { compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -217,6 +302,7 @@ reg = <0x30210000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -228,6 +314,7 @@ reg = <0x30220000 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -239,6 +326,7 @@ reg = <0x30230000 0x10000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -250,6 +338,7 @@ reg = <0x30240000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -319,6 +408,10 @@ /* For nvmem subnodes */ #address-cells = <1>; #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; anatop: anatop@30360000 { @@ -336,6 +429,8 @@ offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; + clock-names = "snvs-rtc"; }; snvs_pwrkey: snvs-powerkey { @@ -344,6 +439,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; @@ -369,7 +465,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30400000 0x30400000 0x400000>; pwm1: pwm@30660000 { compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; @@ -420,7 +516,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30800000 0x30800000 0x400000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; @@ -639,7 +735,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x32c00000 0x32c00000 0x400000>; usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; @@ -656,14 +752,6 @@ status = "disabled"; }; - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc1: usbmisc@32e40200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -685,14 +773,6 @@ status = "disabled"; }; - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc2: usbmisc@32e50200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -729,5 +809,14 @@ dma-names = "rx-tx"; status = "disabled"; }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x38800000 0x10000>, /* GIC Dist */ + <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; |