diff options
Diffstat (limited to 'arch/arm/plat-mxc/ehci.c')
| -rw-r--r-- | arch/arm/plat-mxc/ehci.c | 77 |
1 files changed, 58 insertions, 19 deletions
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 9915607683de..8772ce346a58 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -49,6 +49,7 @@ #define MXC_OTG_OFFSET 0 #define MXC_H1_OFFSET 0x200 +#define MXC_H2_OFFSET 0x400 /* USB_CTRL */ #define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ @@ -61,6 +62,11 @@ #define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ #define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ +/* USBH2CTRL */ +#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) +#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) +#define MXC_H2_UCTRL_H2PM_BIT (1 << 4) + #define MXC_USBCMD_OFFSET 0x140 /* USBCMD */ @@ -69,9 +75,9 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) { unsigned int v; -#if defined(CONFIG_ARCH_MX25) +#if defined(CONFIG_SOC_IMX25) if (cpu_is_mx25()) { - v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR + + v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { @@ -108,14 +114,14 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) return -EINVAL; } - writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR + + writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } -#endif /* CONFIG_ARCH_MX25 */ +#endif /* if defined(CONFIG_SOC_IMX25) */ #if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) { - v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + + v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { @@ -153,13 +159,13 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) return -EINVAL; } - writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + + writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } if (cpu_is_mx35()) { - v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { @@ -196,7 +202,7 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) return -EINVAL; } - writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } @@ -206,7 +212,7 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) /* On i.MX27 we can use the i.MX31 USBCTRL bits, they * are identical */ - v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { case 0: /* OTG port */ @@ -241,12 +247,12 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) default: return -EINVAL; } - writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } #endif /* CONFIG_MACH_MX27 */ -#ifdef CONFIG_ARCH_MX51 +#ifdef CONFIG_SOC_IMX51 if (cpu_is_mx51()) { void __iomem *usb_base; void __iomem *usbotg_base; @@ -254,6 +260,10 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) int ret = 0; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) { + printk(KERN_ERR "%s(): ioremap failed\n", __func__); + return -ENOMEM; + } switch (port) { case 0: /* OTG port */ @@ -262,6 +272,9 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) case 1: /* Host 1 port */ usbotg_base = usb_base + MXC_H1_OFFSET; break; + case 2: /* Host 2 port */ + usbotg_base = usb_base + MXC_H2_OFFSET; + break; default: printk(KERN_ERR"%s no such port %d\n", __func__, port); ret = -ENOENT; @@ -274,10 +287,13 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) if (flags & MXC_EHCI_INTERNAL_PHY) { v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */ - else - v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */ + if (flags & MXC_EHCI_POWER_PINS_ENABLED) { + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; + } else { + /* OC/USBPWR is used */ + v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + } __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); @@ -285,16 +301,23 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */ else v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MXC_OTG_UCTRL_OPM_BIT; + else + v &= ~MXC_OTG_UCTRL_OPM_BIT; __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); } break; case 1: /* Host 1 */ /*Host ULPI */ v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); - if (flags & MXC_EHCI_WAKEUP_ENABLED) - v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */ - else - v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */ + if (flags & MXC_EHCI_WAKEUP_ENABLED) { + /* HOST1 wakeup/ULPI intr enable */ + v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); + } else { + /* HOST1 wakeup/ULPI intr disable */ + v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); + } if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ @@ -315,6 +338,22 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK; __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET); break; + case 2: /* Host 2 ULPI */ + v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) { + /* HOST1 wakeup/ULPI intr enable */ + v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); + } else { + /* HOST1 wakeup/ULPI intr disable */ + v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); + } + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + else + v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); + break; } error: |