diff options
Diffstat (limited to 'arch/arm/mach-omap2')
35 files changed, 285 insertions, 407 deletions
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b8..130ab00c09a2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include <linux/usb/otg.h> #include <linux/spi/spi.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 41b0a2fe0b04..909a8b91b564 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -26,6 +26,7 @@ #include <linux/i2c/at24.h> #include <linux/i2c/twl.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/mmc/host.h> @@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; +static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + static void __init cm_t35_init_ethernet(void) { + regulator_register_fixed(0, cm_t35_smsc911x_supplies, + ARRAY_SIZE(cm_t35_smsc911x_supplies)); + regulator_register_fixed(1, sb_t35_smsc911x_supplies, + ARRAY_SIZE(sb_t35_smsc911x_supplies)); + gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b5170..098d183a0086 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index e558800adfdf..930c0d380435 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -634,8 +634,14 @@ static void __init igep_wlan_bt_init(void) static inline void __init igep_wlan_bt_init(void) { } #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init igep_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d50a562adfa0..1b6049567ab4 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,6 +22,7 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/spi/spi.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/io.h> @@ -410,8 +411,14 @@ static struct mtd_partition ldp_nand_partitions[] = { }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap_ldp_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); ldp_init_smsc911x(); omap_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 4c90f078abe1..49df12735b41 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -114,15 +114,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = { static inline void __init omap3evm_init_smsc911x(void) { - struct clk *l3ck; - unsigned int rate; - - l3ck = clk_get(NULL, "l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); - /* Configure ethernet controller reset gpio */ if (cpu_is_omap3430()) { if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) @@ -632,9 +623,15 @@ static void __init omap3_evm_wl12xx_init(void) #endif } +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); if (cpu_is_omap3630()) omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 4a7d8c8a75da..9b3c141ff51b 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -188,8 +189,14 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3logic_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3torpedo_fix_pbias_voltage(); omap3logic_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 641004380795..4dffc95bddd2 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -24,6 +24,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> @@ -72,15 +73,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = { static inline void __init omap3stalker_init_eth(void) { - struct clk *l3ck; - unsigned int rate; - - l3ck = clk_get(NULL, "l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); - omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); gpmc_smsc911x_init(&smsc911x_cfg); } @@ -419,8 +411,14 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3_stalker_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_board_config = omap3_stalker_config; omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f0126..1b782ba53433 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 668533e2a379..33aa3910b09e 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -498,10 +498,18 @@ static struct gpio overo_bt_gpios[] __initdata = { { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + static void __init overo_init(void) { int ret; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_hsmmc_init(mmc); overo_i2c_init(); diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 1e8540eabde9..f64f44173061 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -14,6 +14,9 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> + #include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> @@ -117,11 +120,17 @@ static struct platform_device *zoom_devices[] __initdata = { &zoom_debugboard_serial_device, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + int __init zoom_debugboard_init(void) { if (!omap_zoom_debugboard_detect()) return 0; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); zoom_init_smsc911x(); zoom_init_quaduart(); return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 7072e0d651b1..3d9d746b221a 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - * XXX This should be replaced by an OPP layer in the near future - */ -static struct cpufreq_frequency_table *freq_table; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - const struct prcm_config *prcm; - int i = 0; - int tbl_sz = 0; - - if (!cpu_is_omap24xx()) - return; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - tbl_sz++; - } - - /* - * XXX Ensure that we're doing what CPUFreq expects for this error - * case and the following one - */ - if (tbl_sz == 0) { - pr_warning("%s: no matching entries in rate_table\n", - __func__); - return; - } - - /* Include the CPUFREQ_TABLE_END terminator entry */ - tbl_sz++; - - freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, - GFP_ATOMIC); - if (!freq_table) { - pr_err("%s: could not kzalloc frequency table\n", __func__); - return; - } - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} - -void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - if (!cpu_is_omap24xx()) - return; - - kfree(freq_table); -} - -#endif diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f57ed5baeccf..d9f4931513f9 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - /* These will be removed when the OPP code is integrated */ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, - .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, -#endif }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b8c2a686481c..a1bb23a23351 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[]; extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ) -extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#else -#define omap2_clk_init_cpufreq_table 0 -#define omap2_clk_exit_cpufreq_table 0 -#endif - extern const struct clkops clkops_omap2_iclk_dflt_wait; extern const struct clkops clkops_omap2_iclk_dflt; extern const struct clkops clkops_omap2_iclk_idle_only; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 480fb8f09aed..f4a626f7c79e 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -747,7 +747,7 @@ static struct clk dpll4_m3_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_TV_MASK, + .clksel_mask = OMAP3630_CLKSEL_TV_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -832,7 +832,7 @@ static struct clk dpll4_m4_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, + .clksel_mask = OMAP3630_CLKSEL_DSS1_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -859,7 +859,7 @@ static struct clk dpll4_m5_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, + .clksel_mask = OMAP3630_CLKSEL_CAM_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .set_rate = &omap2_clksel_set_rate, @@ -886,7 +886,7 @@ static struct clk dpll4_m6_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL4_MASK, + .clksel_mask = OMAP3630_DIV_DPLL4_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -1394,6 +1394,7 @@ static struct clk cpefuse_fck = { .name = "cpefuse_fck", .ops = &clkops_omap2_dflt, .parent = &sys_ck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, .recalc = &followparent_recalc, @@ -1403,6 +1404,7 @@ static struct clk ts_fck = { .name = "ts_fck", .ops = &clkops_omap2_dflt, .parent = &omap_32k_fck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_TS_SHIFT, .recalc = &followparent_recalc, @@ -1412,6 +1414,7 @@ static struct clk usbtll_fck = { .name = "usbtll_fck", .ops = &clkops_omap2_dflt_wait, .parent = &dpll5_m2_ck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, .recalc = &followparent_recalc, @@ -1617,6 +1620,7 @@ static struct clk fshostusb_fck = { .name = "fshostusb_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, .recalc = &followparent_recalc, @@ -2043,6 +2047,7 @@ static struct clk omapctrl_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, .flags = ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2094,6 +2099,7 @@ static struct clk usb_l4_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, .clksel = usb_l4_clksel, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3467,8 +3473,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", "emac_clk", &emac_ick, CK_AM35XX), - CLK("davinci_emac", "phy_clk", &emac_fck, CK_AM35XX), + CLK("davinci_emac", NULL, &emac_ick, CK_AM35XX), + CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index c03c1108468e..fa6ea65ad44b 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -957,8 +957,8 @@ static struct dpll_data dpll_usb_dd = { .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_USB, .idlest_reg = OMAP4430_CM_IDLEST_DPLL_USB, - .mult_mask = OMAP4430_DPLL_MULT_MASK, - .div1_mask = OMAP4430_DPLL_DIV_MASK, + .mult_mask = OMAP4430_DPLL_MULT_USB_MASK, + .div1_mask = OMAP4430_DPLL_DIV_0_7_MASK, .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, @@ -978,6 +978,7 @@ static struct clk dpll_usb_ck = { .recalc = &omap3_dpll_recalc, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "l3_init_clkdm", }; static struct clk dpll_usb_clkdcoldo_ck = { diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 9299ac291d28..bd7ed13515cc 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -390,7 +390,7 @@ static struct clockdomain emu_sys_44xx_clkdm = { .prcm_partition = OMAP4430_PRM_PARTITION, .cm_inst = OMAP4430_PRM_EMU_CM_INST, .clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP, }; static struct clockdomain l3_dma_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 5e5880d6d099..b6c77be3e8f7 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,15 +19,11 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/smsc911x.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> #include <plat/board.h> #include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> -static struct omap_smsc911x_platform_data *gpmc_cfg; - static struct resource gpmc_smsc911x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -41,51 +37,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_16BIT, -}; - -static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -/* Generic regulator definition to satisfy smsc911x */ -static struct regulator_init_data gpmc_smsc911x_reg_init_data = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), - .consumer_supplies = gpmc_smsc911x_supply, -}; - -static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { - .supply_name = "gpmc_smsc911x", - .microvolts = 3300000, - .gpio = -EINVAL, - .startup_delay = 0, - .enable_high = 0, - .enabled_at_boot = 1, - .init_data = &gpmc_smsc911x_reg_init_data, -}; - -/* - * Platform device id of 42 is a temporary fix to avoid conflicts - * with other reg-fixed-voltage devices. The real fix should - * involve the driver core providing a way of dynamically - * assigning a unique id on registration for platform devices - * in the same name space. - */ -static struct platform_device gpmc_smsc911x_regulator = { - .name = "reg-fixed-voltage", - .id = 42, - .dev = { - .platform_data = &gpmc_smsc911x_fixed_reg_data, - }, }; /* @@ -93,23 +44,12 @@ static struct platform_device gpmc_smsc911x_regulator = { * assume that pin multiplexing is done in the board-*.c file, * or in the bootloader. */ -void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) +void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg) { struct platform_device *pdev; unsigned long cs_mem_base; int ret; - gpmc_cfg = board_data; - - if (!gpmc_cfg->id) { - ret = platform_device_register(&gpmc_smsc911x_regulator); - if (ret < 0) { - pr_err("Unable to register smsc911x regulators: %d\n", - ret); - return; - } - } - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; @@ -139,8 +79,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpio_set_value(gpmc_cfg->gpio_reset, 1); } - if (gpmc_cfg->flags) - gpmc_smsc911x_config.flags = gpmc_cfg->flags; + gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT; pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 100db6217f39..b0268eaffe13 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -506,6 +506,13 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, if (oh->dev_attr != NULL) { mmc_dev_attr = oh->dev_attr; mmc_data->controller_flags = mmc_dev_attr->flags; + /* + * erratum 2.1.1.128 doesn't apply if board has + * a transceiver is attached + */ + if (hsmmcinfo->transceiver) + mmc_data->controller_flags &= + ~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ; } pdev = platform_device_alloc(name, ctrl_nr - 1); diff --git a/arch/arm/mach-omap2/include/mach/barriers.h b/arch/arm/mach-omap2/include/mach/barriers.h index 4fa72c7cc7cd..1c582a8592b9 100644 --- a/arch/arm/mach-omap2/include/mach/barriers.h +++ b/arch/arm/mach-omap2/include/mach/barriers.h @@ -22,6 +22,8 @@ #ifndef __MACH_BARRIERS_H #define __MACH_BARRIERS_H +#include <asm/outercache.h> + extern void omap_bus_sync(void); #define rmb() dsb() diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index eba6cd3816f5..7144ae651d3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1395,7 +1395,7 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) */ static int _ocp_softreset(struct omap_hwmod *oh) { - u32 v; + u32 v, softrst_mask; int c = 0; int ret = 0; @@ -1422,16 +1422,21 @@ static int _ocp_softreset(struct omap_hwmod *oh) goto dis_opt_clks; _write_sysconfig(v, oh); + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); - else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) + else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { + softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); omap_test_timeout(!(omap_hwmod_read(oh, oh->class->sysc->sysc_offs) - & SYSC_TYPE2_SOFTRESET_MASK), + & softrst_mask), MAX_MODULE_SOFTRESET_WAIT, c); + } if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", @@ -1477,6 +1482,11 @@ static int _reset(struct omap_hwmod *oh) ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh); + if (oh->class->sysc) { + _update_sysc_cache(oh); + _enable_sysc(oh); + } + return ret; } @@ -1786,20 +1796,9 @@ static int _setup(struct omap_hwmod *oh, void *data) return 0; } - if (!(oh->flags & HWMOD_INIT_NO_RESET)) { + if (!(oh->flags & HWMOD_INIT_NO_RESET)) _reset(oh); - /* - * OCP_SYSCONFIG bits need to be reprogrammed after a softreset. - * The _enable() function should be split to - * avoid the rewrite of the OCP_SYSCONFIG register. - */ - if (oh->class->sysc) { - _update_sysc_cache(oh); - _enable_sysc(oh); - } - } - postsetup_state = oh->_postsetup_state; if (postsetup_state == _HWMOD_STATE_UNKNOWN) postsetup_state = _HWMOD_STATE_ENABLED; @@ -2463,26 +2462,28 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, * @oh: struct omap_hwmod * * * Sets the module OCP socket ENAWAKEUP bit to allow the module to - * send wakeups to the PRCM. Eventually this should sets PRCM wakeup - * registers to cause the PRCM to receive wakeup events from the - * module. Does not set any wakeup routing registers beyond this - * point - if the module is to wake up any other module or subsystem, - * that must be set separately. Called by omap_device code. Returns - * -EINVAL on error or 0 upon success. + * send wakeups to the PRCM, and enable I/O ring wakeup events for + * this IP block if it has dynamic mux entries. Eventually this + * should set PRCM wakeup registers to cause the PRCM to receive + * wakeup events from the module. Does not set any wakeup routing + * registers beyond this point - if the module is to wake up any other + * module or subsystem, that must be set separately. Called by + * omap_device code. Returns -EINVAL on error or 0 upon success. */ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) { unsigned long flags; u32 v; - if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) - return -EINVAL; - spin_lock_irqsave(&oh->_lock, flags); - v = oh->_sysc_cache; - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); + + if (oh->class->sysc && + (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { + v = oh->_sysc_cache; + _enable_wakeup(oh, &v); + _write_sysconfig(v, oh); + } + _set_idle_ioring_wakeup(oh, true); spin_unlock_irqrestore(&oh->_lock, flags); @@ -2494,26 +2495,28 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) * @oh: struct omap_hwmod * * * Clears the module OCP socket ENAWAKEUP bit to prevent the module - * from sending wakeups to the PRCM. Eventually this should clear - * PRCM wakeup registers to cause the PRCM to ignore wakeup events - * from the module. Does not set any wakeup routing registers beyond - * this point - if the module is to wake up any other module or - * subsystem, that must be set separately. Called by omap_device - * code. Returns -EINVAL on error or 0 upon success. + * from sending wakeups to the PRCM, and disable I/O ring wakeup + * events for this IP block if it has dynamic mux entries. Eventually + * this should clear PRCM wakeup registers to cause the PRCM to ignore + * wakeup events from the module. Does not set any wakeup routing + * registers beyond this point - if the module is to wake up any other + * module or subsystem, that must be set separately. Called by + * omap_device code. Returns -EINVAL on error or 0 upon success. */ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) { unsigned long flags; u32 v; - if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) - return -EINVAL; - spin_lock_irqsave(&oh->_lock, flags); - v = oh->_sysc_cache; - _disable_wakeup(oh, &v); - _write_sysconfig(v, oh); + + if (oh->class->sysc && + (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { + v = oh->_sysc_cache; + _disable_wakeup(oh, &v); + _write_sysconfig(v, oh); + } + _set_idle_ioring_wakeup(oh, false); spin_unlock_irqrestore(&oh->_lock, flags); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a5409ce3f323..a6bde34e443a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c4f56cb60d7d..04a3885f4475 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .slave = &omap2430_dss_venc_hwmod, .clk = "dss_ick", .addr = omap2_dss_venc_addrs, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 34b9766d1d23..db86ce90c69f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 08daa5e0eb5f..6abc75753e42 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, + /* + * ISS needs 100 OCP clk cycles delay after a softreset before + * accessing sysconfig again. + * The lowest frequency at the moment for L3 bus is 100 MHz, so + * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). + * + * TODO: Indicate errata when available. + */ + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | @@ -2996,6 +3005,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = { &omap44xx_l4_abe__mcbsp1_dma, }; +static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap44xx_mcbsp_hwmod_class, @@ -3012,6 +3026,8 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = { }, .slaves = omap44xx_mcbsp1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves), + .opt_clks = mcbsp1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), }; /* mcbsp2 */ @@ -3071,6 +3087,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = { &omap44xx_l4_abe__mcbsp2_dma, }; +static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap44xx_mcbsp_hwmod_class, @@ -3087,6 +3108,8 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = { }, .slaves = omap44xx_mcbsp2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves), + .opt_clks = mcbsp2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), }; /* mcbsp3 */ @@ -3146,6 +3169,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = { &omap44xx_l4_abe__mcbsp3_dma, }; +static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap44xx_mcbsp_hwmod_class, @@ -3162,6 +3190,8 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = { }, .slaves = omap44xx_mcbsp3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves), + .opt_clks = mcbsp3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), }; /* mcbsp4 */ @@ -3200,6 +3230,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = { &omap44xx_l4_per__mcbsp4, }; +static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap44xx_mcbsp_hwmod_class, @@ -3216,6 +3251,8 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = { }, .slaves = omap44xx_mcbsp4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves), + .opt_clks = mcbsp4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp4_opt_clks), }; /* diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 9262a6b47702..de6d46451746 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -64,10 +64,10 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, } oh = omap_hwmod_lookup(opp_def->hwmod_name); if (!oh || !oh->od) { - pr_warn("%s: no hwmod or odev for %s, [%d] " + pr_debug("%s: no hwmod or odev for %s, [%d] " "cannot add OPPs.\n", __func__, opp_def->hwmod_name, i); - return -EINVAL; + continue; } dev = &oh->od->pdev->dev; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 238defc6f6df..703bd1099259 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -153,8 +153,7 @@ static void omap3_save_secure_ram_context(void) pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { - printk(KERN_ERR "save_secure_sram() returns %08x\n", - ret); + pr_err("save_secure_sram() returns %08x\n", ret); while (1) ; } @@ -289,7 +288,7 @@ void omap_sram_idle(void) break; default: /* Invalid state */ - printk(KERN_ERR "Invalid mpu state in sram_idle\n"); + pr_err("Invalid mpu state in sram_idle\n"); return; } @@ -439,18 +438,17 @@ restore: list_for_each_entry(pwrst, &pwrst_list, node) { state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { - printk(KERN_INFO "Powerdomain (%s) didn't enter " - "target state %d\n", + pr_info("Powerdomain (%s) didn't enter " + "target state %d\n", pwrst->pwrdm->name, pwrst->next_state); ret = -1; } omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) - printk(KERN_ERR "Could not enter target state in pm_suspend\n"); + pr_err("Could not enter target state in pm_suspend\n"); else - printk(KERN_INFO "Successfully put all powerdomains " - "to target state\n"); + pr_info("Successfully put all powerdomains to target state\n"); return ret; } @@ -734,21 +732,22 @@ static int __init omap3_pm_init(void) if (ret) { pr_err("pm: Failed to request pm_io irq\n"); - goto err1; + goto err2; } ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { - printk(KERN_ERR "Failed to setup powerdomains\n"); - goto err2; + pr_err("Failed to setup powerdomains\n"); + goto err3; } (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); if (mpu_pwrdm == NULL) { - printk(KERN_ERR "Failed to get mpu_pwrdm\n"); - goto err2; + pr_err("Failed to get mpu_pwrdm\n"); + ret = -EINVAL; + goto err3; } neon_pwrdm = pwrdm_lookup("neon_pwrdm"); @@ -781,8 +780,8 @@ static int __init omap3_pm_init(void) omap3_secure_ram_storage = kmalloc(0x803F, GFP_KERNEL); if (!omap3_secure_ram_storage) - printk(KERN_ERR "Memory allocation failed when" - "allocating for secure sram context\n"); + pr_err("Memory allocation failed when " + "allocating for secure sram context\n"); local_irq_disable(); local_fiq_disable(); @@ -796,14 +795,17 @@ static int __init omap3_pm_init(void) } omap3_save_scratchpad_contents(); -err1: return ret; -err2: - free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); + +err3: list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { list_del(&pwrst->node); kfree(pwrst); } + free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init); +err2: + free_irq(omap_prcm_event_to_irq("wkup"), NULL); +err1: return ret; } diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 9ccaadc2cf07..885625352429 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -144,7 +144,7 @@ static void omap_default_idle(void) static int __init omap4_pm_init(void) { int ret; - struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; + struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; if (!cpu_is_omap44xx()) @@ -168,14 +168,19 @@ static int __init omap4_pm_init(void) * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as * expected. The hardware recommendation is to enable static * dependencies for these to avoid system lock ups or random crashes. + * The L4 wakeup depedency is added to workaround the OCP sync hardware + * BUG with 32K synctimer which lead to incorrect timer value read + * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which + * are part of L4 wakeup clockdomain. */ mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); emif_clkdm = clkdm_lookup("l3_emif_clkdm"); l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); l4_per_clkdm = clkdm_lookup("l4_per_clkdm"); + l4wkup = clkdm_lookup("l4_wkup_clkdm"); ducati_clkdm = clkdm_lookup("ducati_clkdm"); - if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || + if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) || (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm)) goto err2; @@ -183,6 +188,7 @@ static int __init omap4_pm_init(void) ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm); + ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup); ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8a18d1bd61c8..96ad3dbeac34 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -972,7 +972,13 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm) int pwrdm_state_switch(struct powerdomain *pwrdm) { - return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); + int ret; + + ret = pwrdm_wait_transition(pwrdm); + if (!ret) + ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); + + return ret; } int pwrdm_clkdm_state_switch(struct clockdomain *clkdm) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index eac623c7c3d8..f106d21ff581 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -147,8 +147,9 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs) u32 mask, st; /* XXX read mask from RAM? */ - mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs); - st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs); + mask = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + irqen_offs); + st = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, irqst_offs); return mask & st; } @@ -180,7 +181,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events) */ void omap44xx_prm_ocp_barrier(void) { - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_REVISION_PRM_OFFSET); } @@ -198,19 +199,19 @@ void omap44xx_prm_ocp_barrier(void) void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQSTATUS_MPU_OFFSET); saved_mask[1] = - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); - omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); /* OCP barrier */ - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_REVISION_PRM_OFFSET); } @@ -226,9 +227,9 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) */ void omap44xx_prm_restore_irqen(u32 *saved_mask) { - omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); } diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 873b51d494ea..d28f848897d6 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -290,7 +290,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) goto err; } - for (i = 0; i <= irq_setup->nr_regs; i++) { + for (i = 0; i < irq_setup->nr_regs; i++) { gc = irq_alloc_generic_chip("PRCM", 1, irq_setup->base_irq + i * 32, prm_base, handle_level_irq); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0cdd359a128e..9fc2f44188cb 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev) static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); + u8 idlemode; - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); + if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + + omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); } #else @@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static struct omap_device_pad default_uart1_pads[] __initdata = { - { - .name = "uart1_cts.uart1_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rts.uart1_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_tx.uart1_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rx.uart1_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart2_pads[] __initdata = { - { - .name = "uart2_cts.uart2_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rts.uart2_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_tx.uart2_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rx.uart2_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart3_pads[] __initdata = { - { - .name = "uart3_cts_rctx.uart3_cts_rctx", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rts_sd.uart3_rts_sd", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_tx_irtx.uart3_tx_irtx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { - { - .name = "gpmc_wait2.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "gpmc_wait3.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - }, -}; - -static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { - { - .name = "uart4_tx.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart4_rx.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - switch (bdata->id) { - case 0: - bdata->pads = default_uart1_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); - break; - case 1: - bdata->pads = default_uart2_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); - break; - case 2: - bdata->pads = default_uart3_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); - break; - case 3: - if (cpu_is_omap44xx()) { - bdata->pads = default_omap4_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap4_uart4_pads); - } else if (cpu_is_omap3630()) { - bdata->pads = default_omap36xx_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap36xx_uart4_pads); - } - break; - default: - break; - } } #else static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d1..7a7b89304c48 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27a..09627483a57f 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index f51348dafafd..dde8a11f47d5 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -54,7 +54,7 @@ static struct omap_device_pm_latency omap_uhhtll_latency[] = { /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST */ -static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_EHCI_PORT_MODE_PHY: @@ -197,7 +197,8 @@ static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) return; } -static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static +void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_EHCI_PORT_MODE_PHY: @@ -315,7 +316,7 @@ static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: @@ -412,7 +413,8 @@ static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static +void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: |