1 files changed, 0 insertions, 95 deletions
diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c
deleted file mode 100644
index d279294f2381..000000000000
--- a/arch/arm/boot/compressed/sdhi-sh7372.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <mach/mmc.h>
-#include <linux/mmc/boot.h>
-#include <linux/mmc/tmio.h>
-
-#include "sdhi-shmobile.h"
-
-#define PORT179CR       0xe60520b3
-#define PORT180CR       0xe60520b4
-#define PORT181CR       0xe60520b5
-#define PORT182CR       0xe60520b6
-#define PORT183CR       0xe60520b7
-#define PORT184CR       0xe60520b8
-
-#define SMSTPCR3        0xe615013c
-
-#define CR_INPUT_ENABLE 0x10
-#define CR_FUNCTION1    0x01
-
-#define SDHI1_BASE	(void __iomem *)0xe6860000
-#define SDHI_BASE	SDHI1_BASE
-
-/*  SuperH Mobile SDHI loader
- *
- * loads the zImage from an SD card starting from block 0
- * on physical partition 1
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 1 (=byte 512) of physical partition 1
- *
- * Use the following line to write the vrl4 formated zImage
- * to an SD card
- * # dd if=vrl4.out of=/dev/sdx bs=512
- */
-asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
-{
-	int high_capacity;
-
-	mmc_init_progress();
-
-	mmc_update_progress(MMC_PROGRESS_ENTER);
-        /* Initialise SDHI1 */
-        /* PORT184CR: GPIO_FN_SDHICMD1 Control */
-        __raw_writeb(CR_FUNCTION1, PORT184CR);
-        /* PORT179CR: GPIO_FN_SDHICLK1 Control */
-        __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
-        /* PORT181CR: GPIO_FN_SDHID1_3 Control */
-        __raw_writeb(CR_FUNCTION1, PORT183CR);
-        /* PORT182CR: GPIO_FN_SDHID1_2 Control */
-        __raw_writeb(CR_FUNCTION1, PORT182CR);
-        /* PORT183CR: GPIO_FN_SDHID1_1 Control */
-        __raw_writeb(CR_FUNCTION1, PORT181CR);
-        /* PORT180CR: GPIO_FN_SDHID1_0 Control */
-        __raw_writeb(CR_FUNCTION1, PORT180CR);
-
-        /* Enable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
-
-	/* setup SDHI hardware */
-	mmc_update_progress(MMC_PROGRESS_INIT);
-	high_capacity = sdhi_boot_init(SDHI_BASE);
-	if (high_capacity < 0)
-		goto err;
-
-	mmc_update_progress(MMC_PROGRESS_LOAD);
-	/* load kernel */
-	if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
-			      0, /* Kernel is at block 1 */
-			      (len + TMIO_BBS - 1) / TMIO_BBS, buf))
-		goto err;
-
-        /* Disable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_DONE);
-
-	return;
-err:
-	for(;;);
-}