diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/palmas.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/s2mps11.txt | 109 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/palmas-pmic.txt | 5 |
3 files changed, 116 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt index 892537d1a48f..e5f0f8303461 100644 --- a/Documentation/devicetree/bindings/mfd/palmas.txt +++ b/Documentation/devicetree/bindings/mfd/palmas.txt @@ -5,6 +5,7 @@ twl6035 (palmas) twl6037 (palmas) tps65913 (palmas) tps65914 (palmas) +tps659038 Required properties: - compatible : Should be from the list @@ -14,6 +15,7 @@ Required properties: ti,tps65913 ti,tps65914 ti,tps80036 + ti,tps659038 and also the generic series names ti,palmas - interrupt-controller : palmas has its own internal IRQs diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt new file mode 100644 index 000000000000..c9332c626021 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -0,0 +1,109 @@ + +* Samsung S2MPS11 Voltage and Current Regulator + +The Samsung S2MP211 is a multi-function device which includes voltage and +current regulators, RTC, charger controller and other sub-blocks. It is +interfaced to the host controller using a I2C interface. Each sub-block is +addressed by the host system using different I2C slave address. + +Required properties: +- compatible: Should be "samsung,s2mps11-pmic". +- reg: Specifies the I2C slave address of the pmic block. It should be 0x66. + +Optional properties: +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from s2mps11 are delivered to. +- interrupts: Interrupt specifiers for interrupt sources. + +Optional nodes: +- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to + register these as clocks with common clock framework instantiate a sub-node + named "clocks". It uses the common clock binding documented in : + [Documentation/devicetree/bindings/clock/clock-bindings.txt] + - #clock-cells: should be 1. + + - The following is the list of clocks generated by the controller. Each clock + is assigned an identifier and client nodes use this identifier to specify + the clock which they consume. + Clock ID + ---------------------- + 32KhzAP 0 + 32KhzCP 1 + 32KhzBT 2 + +- regulators: The regulators of s2mps11 that have to be instantiated should be +included in a sub-node named 'regulators'. Regulator nodes included in this +sub-node should be of the format as listed below. + + regulator_name { + [standard regulator constraints....]; + }; + + regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us + + BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly + regulator-ramp-delay = <0> can be used for them to disable ramp delay. + In absence of regulator-ramp-delay property, default ramp delay will be used. + +NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set +for a particular group of BUCKs. So provide same regulator-ramp-delay<value>. +Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6], +BUCK[3, 4], and BUCK[7, 8, 10] + +The regulator constraints inside the regulator nodes use the standard regulator +bindings which are documented elsewhere. + +The following are the names of the regulators that the s2mps11 pmic block +supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of s2mps11. + + - LDOn + - valid values for n are 1 to 28 + - Example: LDO0, LD01, LDO28 + - BUCKn + - valid values for n are 1 to 9. + - Example: BUCK1, BUCK2, BUCK9 + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + s2m_osc: clocks{ + #clock-cells = 1; + clock-output-names = "xx", "yy", "zz"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index a22e4c70db5c..875639ae0606 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -36,6 +36,9 @@ Optional nodes: ti,smps-range - OTP has the wrong range set for the hardware so override 0 - low range, 1 - high range. +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. + Example: #include <dt-bindings/interrupt-controller/irq.h> @@ -48,6 +51,8 @@ pmic { ti,ldo6-vibrator; + ti,system-power-controller; + regulators { smps12_reg : smps12 { regulator-name = "smps12"; |