diff options
Diffstat (limited to 'Documentation')
39 files changed, 1630 insertions, 325 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 7c2b846521f3..8494ef27e8d2 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -7,6 +7,7 @@ Description: all descendant memdevs for unbind. Writing '1' to this attribute flushes that work. + What: /sys/bus/cxl/devices/memX/firmware_version Date: December, 2020 KernelVersion: v5.12 @@ -16,6 +17,7 @@ Description: Memory Device Output Payload in the CXL-2.0 specification. + What: /sys/bus/cxl/devices/memX/ram/size Date: December, 2020 KernelVersion: v5.12 @@ -25,6 +27,7 @@ Description: identically named field in the Identify Memory Device Output Payload in the CXL-2.0 specification. + What: /sys/bus/cxl/devices/memX/pmem/size Date: December, 2020 KernelVersion: v5.12 @@ -34,6 +37,7 @@ Description: identically named field in the Identify Memory Device Output Payload in the CXL-2.0 specification. + What: /sys/bus/cxl/devices/memX/serial Date: January, 2022 KernelVersion: v5.18 @@ -43,6 +47,7 @@ Description: capability. Mandatory for CXL devices, see CXL 2.0 8.1.12.2 Memory Device PCIe Capabilities and Extended Capabilities. + What: /sys/bus/cxl/devices/memX/numa_node Date: January, 2022 KernelVersion: v5.18 @@ -52,114 +57,334 @@ Description: host PCI device for this memory device, emit the CPU node affinity for this device. + What: /sys/bus/cxl/devices/*/devtype Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: - CXL device objects export the devtype attribute which mirrors - the same value communicated in the DEVTYPE environment variable - for uevents for devices on the "cxl" bus. + (RO) CXL device objects export the devtype attribute which + mirrors the same value communicated in the DEVTYPE environment + variable for uevents for devices on the "cxl" bus. + What: /sys/bus/cxl/devices/*/modalias Date: December, 2021 KernelVersion: v5.18 Contact: linux-cxl@vger.kernel.org Description: - CXL device objects export the modalias attribute which mirrors - the same value communicated in the MODALIAS environment variable - for uevents for devices on the "cxl" bus. + (RO) CXL device objects export the modalias attribute which + mirrors the same value communicated in the MODALIAS environment + variable for uevents for devices on the "cxl" bus. + What: /sys/bus/cxl/devices/portX/uport Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: - CXL port objects are enumerated from either a platform firmware - device (ACPI0017 and ACPI0016) or PCIe switch upstream port with - CXL component registers. The 'uport' symlink connects the CXL - portX object to the device that published the CXL port + (RO) CXL port objects are enumerated from either a platform + firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream + port with CXL component registers. The 'uport' symlink connects + the CXL portX object to the device that published the CXL port capability. + What: /sys/bus/cxl/devices/portX/dportY Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: - CXL port objects are enumerated from either a platform firmware - device (ACPI0017 and ACPI0016) or PCIe switch upstream port with - CXL component registers. The 'dportY' symlink identifies one or - more downstream ports that the upstream port may target in its - decode of CXL memory resources. The 'Y' integer reflects the - hardware port unique-id used in the hardware decoder target - list. + (RO) CXL port objects are enumerated from either a platform + firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream + port with CXL component registers. The 'dportY' symlink + identifies one or more downstream ports that the upstream port + may target in its decode of CXL memory resources. The 'Y' + integer reflects the hardware port unique-id used in the + hardware decoder target list. + What: /sys/bus/cxl/devices/decoderX.Y Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: - CXL decoder objects are enumerated from either a platform + (RO) CXL decoder objects are enumerated from either a platform firmware description, or a CXL HDM decoder register set in a PCIe device (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure). The 'X' in decoderX.Y represents the cxl_port container of this decoder, and 'Y' represents the instance id of a given decoder resource. + What: /sys/bus/cxl/devices/decoderX.Y/{start,size} Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: - The 'start' and 'size' attributes together convey the physical - address base and number of bytes mapped in the decoder's decode - window. For decoders of devtype "cxl_decoder_root" the address - range is fixed. For decoders of devtype "cxl_decoder_switch" the - address is bounded by the decode range of the cxl_port ancestor - of the decoder's cxl_port, and dynamically updates based on the - active memory regions in that address space. + (RO) The 'start' and 'size' attributes together convey the + physical address base and number of bytes mapped in the + decoder's decode window. For decoders of devtype + "cxl_decoder_root" the address range is fixed. For decoders of + devtype "cxl_decoder_switch" the address is bounded by the + decode range of the cxl_port ancestor of the decoder's cxl_port, + and dynamically updates based on the active memory regions in + that address space. + What: /sys/bus/cxl/devices/decoderX.Y/locked Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: - CXL HDM decoders have the capability to lock the configuration - until the next device reset. For decoders of devtype - "cxl_decoder_root" there is no standard facility to unlock them. - For decoders of devtype "cxl_decoder_switch" a secondary bus - reset, of the PCIe bridge that provides the bus for this - decoders uport, unlocks / resets the decoder. + (RO) CXL HDM decoders have the capability to lock the + configuration until the next device reset. For decoders of + devtype "cxl_decoder_root" there is no standard facility to + unlock them. For decoders of devtype "cxl_decoder_switch" a + secondary bus reset, of the PCIe bridge that provides the bus + for this decoders uport, unlocks / resets the decoder. + What: /sys/bus/cxl/devices/decoderX.Y/target_list Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: - Display a comma separated list of the current decoder target - configuration. The list is ordered by the current configured - interleave order of the decoder's dport instances. Each entry in - the list is a dport id. + (RO) Display a comma separated list of the current decoder + target configuration. The list is ordered by the current + configured interleave order of the decoder's dport instances. + Each entry in the list is a dport id. + What: /sys/bus/cxl/devices/decoderX.Y/cap_{pmem,ram,type2,type3} Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: - When a CXL decoder is of devtype "cxl_decoder_root", it + (RO) When a CXL decoder is of devtype "cxl_decoder_root", it represents a fixed memory window identified by platform firmware. A fixed window may only support a subset of memory types. The 'cap_*' attributes indicate whether persistent memory, volatile memory, accelerator memory, and / or expander memory may be mapped behind this decoder's memory window. + What: /sys/bus/cxl/devices/decoderX.Y/target_type Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: - When a CXL decoder is of devtype "cxl_decoder_switch", it can - optionally decode either accelerator memory (type-2) or expander - memory (type-3). The 'target_type' attribute indicates the - current setting which may dynamically change based on what + (RO) When a CXL decoder is of devtype "cxl_decoder_switch", it + can optionally decode either accelerator memory (type-2) or + expander memory (type-3). The 'target_type' attribute indicates + the current setting which may dynamically change based on what memory regions are activated in this decode hierarchy. + + +What: /sys/bus/cxl/devices/endpointX/CDAT +Date: July, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) If this sysfs entry is not present no DOE mailbox was + found to support CDAT data. If it is present and the length of + the data is 0 reading the CDAT data failed. Otherwise the CDAT + data is reported. + + +What: /sys/bus/cxl/devices/decoderX.Y/mode +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it + translates from a host physical address range, to a device local + address range. Device-local address ranges are further split + into a 'ram' (volatile memory) range and 'pmem' (persistent + memory) range. The 'mode' attribute emits one of 'ram', 'pmem', + 'mixed', or 'none'. The 'mixed' indication is for error cases + when a decoder straddles the volatile/persistent partition + boundary, and 'none' indicates the decoder is not actively + decoding, or no DPA allocation policy has been set. + + 'mode' can be written, when the decoder is in the 'disabled' + state, with either 'ram' or 'pmem' to set the boundaries for the + next allocation. + + +What: /sys/bus/cxl/devices/decoderX.Y/dpa_resource +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) When a CXL decoder is of devtype "cxl_decoder_endpoint", + and its 'dpa_size' attribute is non-zero, this attribute + indicates the device physical address (DPA) base address of the + allocation. + + +What: /sys/bus/cxl/devices/decoderX.Y/dpa_size +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it + translates from a host physical address range, to a device local + address range. The range, base address plus length in bytes, of + DPA allocated to this decoder is conveyed in these 2 attributes. + Allocations can be mutated as long as the decoder is in the + disabled state. A write to 'dpa_size' releases the previous DPA + allocation and then attempts to allocate from the free capacity + in the device partition referred to by 'decoderX.Y/mode'. + Allocate and free requests can only be performed on the highest + instance number disabled decoder with non-zero size. I.e. + allocations are enforced to occur in increasing 'decoderX.Y/id' + order and frees are enforced to occur in decreasing + 'decoderX.Y/id' order. + + +What: /sys/bus/cxl/devices/decoderX.Y/interleave_ways +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The number of targets across which this decoder's host + physical address (HPA) memory range is interleaved. The device + maps every Nth block of HPA (of size == + 'interleave_granularity') to consecutive DPA addresses. The + decoder's position in the interleave is determined by the + device's (endpoint or switch) switch ancestry. For root + decoders their interleave is specified by platform firmware and + they only specify a downstream target order for host bridges. + + +What: /sys/bus/cxl/devices/decoderX.Y/interleave_granularity +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The number of consecutive bytes of host physical address + space this decoder claims at address N before the decode rotates + to the next target in the interleave at address N + + interleave_granularity (assuming N is aligned to + interleave_granularity). + + +What: /sys/bus/cxl/devices/decoderX.Y/create_pmem_region +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) Write a string in the form 'regionZ' to start the process + of defining a new persistent memory region (interleave-set) + within the decode range bounded by root decoder 'decoderX.Y'. + The value written must match the current value returned from + reading this attribute. An atomic compare exchange operation is + done on write to assign the requested id to a region and + allocate the region-id for the next creation attempt. EBUSY is + returned if the region name written does not match the current + cached value. + + +What: /sys/bus/cxl/devices/decoderX.Y/delete_region +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) Write a string in the form 'regionZ' to delete that region, + provided it is currently idle / not bound to a driver. + + +What: /sys/bus/cxl/devices/regionZ/uuid +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) Write a unique identifier for the region. This field must + be set for persistent regions and it must not conflict with the + UUID of another region. + + +What: /sys/bus/cxl/devices/regionZ/interleave_granularity +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) Set the number of consecutive bytes each device in the + interleave set will claim. The possible interleave granularity + values are determined by the CXL spec and the participating + devices. + + +What: /sys/bus/cxl/devices/regionZ/interleave_ways +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) Configures the number of devices participating in the + region is set by writing this value. Each device will provide + 1/interleave_ways of storage for the region. + + +What: /sys/bus/cxl/devices/regionZ/size +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) System physical address space to be consumed by the region. + When written trigger the driver to allocate space out of the + parent root decoder's address space. When read the size of the + address space is reported and should match the span of the + region's resource attribute. Size shall be set after the + interleave configuration parameters. Once set it cannot be + changed, only freed by writing 0. The kernel makes no guarantees + that data is maintained over an address space freeing event, and + there is no guarantee that a free followed by an allocate + results in the same address being allocated. + + +What: /sys/bus/cxl/devices/regionZ/resource +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) A region is a contiguous partition of a CXL root decoder + address space. Region capacity is allocated by writing to the + size attribute, the resulting physical address space determined + by the driver is reflected here. It is therefore not useful to + read this before writing a value to the size attribute. + + +What: /sys/bus/cxl/devices/regionZ/target[0..N] +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) Write an endpoint decoder object name to 'targetX' where X + is the intended position of the endpoint device in the region + interleave and N is the 'interleave_ways' setting for the + region. ENXIO is returned if the write results in an impossible + to map decode scenario, like the endpoint is unreachable at that + position relative to the root decoder interleave. EBUSY is + returned if the position in the region is already occupied, or + if the region is not in a state to accept interleave + configuration changes. EINVAL is returned if the object name is + not an endpoint decoder. Once all positions have been + successfully written a final validation for decode conflicts is + performed before activating the region. + + +What: /sys/bus/cxl/devices/regionZ/commit +Date: May, 2022 +KernelVersion: v5.20 +Contact: linux-cxl@vger.kernel.org +Description: + (RW) Write a boolean 'true' string value to this attribute to + trigger the region to transition from the software programmed + state to the actively decoding in hardware state. The commit + operation in addition to validating that the region is in proper + configured state, validates that the decoders are being + committed in spec mandated order (last committed decoder id + + 1), and checks that the hardware accepts the commit request. + Reading this value indicates whether the region is committed or + not. diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst index 9e9556826450..2ce2a38cdd55 100644 --- a/Documentation/admin-guide/hw-vuln/spectre.rst +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -422,6 +422,14 @@ The possible values in this file are: 'RSB filling' Protection of RSB on context switch enabled ============= =========================================== + - EIBRS Post-barrier Return Stack Buffer (PBRSB) protection status: + + =========================== ======================================================= + 'PBRSB-eIBRS: SW sequence' CPU is affected and protection of RSB on VMEXIT enabled + 'PBRSB-eIBRS: Vulnerable' CPU is vulnerable + 'PBRSB-eIBRS: Not affected' CPU is not affected by PBRSB + =========================== ======================================================= + Full mitigation might require a microcode update from the CPU vendor. When the necessary microcode is not available, the kernel will report vulnerability. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8c06271835b0..db5de5f0b9d3 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1158,8 +1158,12 @@ nopku [X86] Disable Memory Protection Keys CPU feature found in some Intel CPUs. - <module>.async_probe [KNL] - Enable asynchronous probe on this module. + <module>.async_probe[=<bool>] [KNL] + If no <bool> value is specified or if the value + specified is not a valid <bool>, enable asynchronous + probe on this module. Otherwise, enable/disable + asynchronous probe on this module as indicated by the + <bool> value. See also: module.async_probe early_ioremap_debug [KNL] Enable debug messages in early_ioremap support. This @@ -3278,6 +3282,15 @@ For details see: Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst + module.async_probe=<bool> + [KNL] When set to true, modules will use async probing + by default. To enable/disable async probing for a + specific module, use the module specific control that + is documented under <module>.async_probe. When both + module.async_probe and <module>.async_probe are + specified, <module>.async_probe takes precedence for + the specific module. + module.sig_enforce [KNL] When CONFIG_MODULE_SIG is set, this means that modules without (valid) signatures will fail to load. diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index 2f1b8b6852a0..24fa3d87a40b 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -25,6 +25,7 @@ properties: - description: v2 of CPUFREQ HW (EPSS) items: - enum: + - qcom,sm6375-cpufreq-epss - qcom,sm8250-cpufreq-epss - const: qcom,cpufreq-epss diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml index 10b3a7a4af36..a11e1b867379 100644 --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -22,6 +22,13 @@ select: compatible: contains: enum: + - qcom,apq8064 + - qcom,apq8096 + - qcom,ipq8064 + - qcom,msm8939 + - qcom,msm8960 + - qcom,msm8974 + - qcom,msm8996 - qcom,qcs404 required: - compatible diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml index 0f628b088cec..14486aee97b4 100644 --- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml @@ -19,8 +19,14 @@ properties: oneOf: - enum: - x-powers,axp209-gpio + - x-powers,axp221-gpio - x-powers,axp813-gpio - items: + - enum: + - x-powers,axp223-gpio + - x-powers,axp809-gpio + - const: x-powers,axp221-gpio + - items: - const: x-powers,axp803-gpio - const: x-powers,axp813-gpio diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml index 76c8acd981b3..66d0ec763f0b 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -50,6 +50,16 @@ patternProperties: property to uniquely identify the OPP nodes exists. Devices like power domains must have another (implementation dependent) property. + Entries for multiple clocks shall be provided in the same field, as + array of frequencies. The OPP binding doesn't provide any provisions + to relate the values to their clocks or the order in which the clocks + need to be configured and that is left for the implementation + specific binding. + minItems: 1 + maxItems: 16 + items: + maxItems: 1 + opp-microvolt: description: | Voltage for the OPP diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml index 30f7b596d609..59663e897dae 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml @@ -98,6 +98,8 @@ examples: capacity-dmips-mhz = <1024>; clocks = <&kryocc 0>; operating-points-v2 = <&cluster0_opp>; + power-domains = <&cpr>; + power-domain-names = "cpr"; #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { @@ -115,6 +117,8 @@ examples: capacity-dmips-mhz = <1024>; clocks = <&kryocc 0>; operating-points-v2 = <&cluster0_opp>; + power-domains = <&cpr>; + power-domain-names = "cpr"; #cooling-cells = <2>; next-level-cache = <&L2_0>; }; @@ -128,6 +132,8 @@ examples: capacity-dmips-mhz = <1024>; clocks = <&kryocc 1>; operating-points-v2 = <&cluster1_opp>; + power-domains = <&cpr>; + power-domain-names = "cpr"; #cooling-cells = <2>; next-level-cache = <&L2_1>; L2_1: l2-cache { @@ -145,6 +151,8 @@ examples: capacity-dmips-mhz = <1024>; clocks = <&kryocc 1>; operating-points-v2 = <&cluster1_opp>; + power-domains = <&cpr>; + power-domain-names = "cpr"; #cooling-cells = <2>; next-level-cache = <&L2_1>; }; @@ -182,18 +190,21 @@ examples: opp-microvolt = <905000 905000 1140000>; opp-supported-hw = <0x7>; clock-latency-ns = <200000>; + required-opps = <&cpr_opp1>; }; opp-1401600000 { opp-hz = /bits/ 64 <1401600000>; opp-microvolt = <1140000 905000 1140000>; opp-supported-hw = <0x5>; clock-latency-ns = <200000>; + required-opps = <&cpr_opp2>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; opp-microvolt = <1140000 905000 1140000>; opp-supported-hw = <0x1>; clock-latency-ns = <200000>; + required-opps = <&cpr_opp3>; }; }; @@ -207,24 +218,28 @@ examples: opp-microvolt = <905000 905000 1140000>; opp-supported-hw = <0x7>; clock-latency-ns = <200000>; + required-opps = <&cpr_opp1>; }; opp-1804800000 { opp-hz = /bits/ 64 <1804800000>; opp-microvolt = <1140000 905000 1140000>; opp-supported-hw = <0x6>; clock-latency-ns = <200000>; + required-opps = <&cpr_opp4>; }; opp-1900800000 { opp-hz = /bits/ 64 <1900800000>; opp-microvolt = <1140000 905000 1140000>; opp-supported-hw = <0x4>; clock-latency-ns = <200000>; + required-opps = <&cpr_opp5>; }; opp-2150400000 { opp-hz = /bits/ 64 <2150400000>; opp-microvolt = <1140000 905000 1140000>; opp-supported-hw = <0x1>; clock-latency-ns = <200000>; + required-opps = <&cpr_opp6>; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index 0681b9a3965f..d19d65c870aa 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -46,6 +46,7 @@ properties: - allwinner,sun8i-v3s-pinctrl - allwinner,sun9i-a80-pinctrl - allwinner,sun9i-a80-r-pinctrl + - allwinner,sun20i-d1-pinctrl - allwinner,sun50i-a64-pinctrl - allwinner,sun50i-a64-r-pinctrl - allwinner,sun50i-a100-pinctrl @@ -80,9 +81,6 @@ properties: - const: hosc - const: losc - resets: - maxItems: 1 - gpio-controller: true interrupt-controller: true gpio-line-names: true @@ -185,6 +183,18 @@ allOf: properties: compatible: enum: + - allwinner,sun20i-d1-pinctrl + + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + + - if: + properties: + compatible: + enum: - allwinner,sun9i-a80-pinctrl then: diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml index 47a56b83a610..7a11beb8f222 100644 --- a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml @@ -152,7 +152,7 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uid>, <&pinmux_uid>; - uid { + button-uid { label = "UID"; linux,code = <102>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml index 8a2bb8608291..1eeb885ce0c6 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml @@ -28,6 +28,8 @@ properties: gpio-ranges: maxItems: 1 + gpio-line-names: true + reg: description: | Physical address base for gpio base registers. There are 8 different GPIO @@ -105,31 +107,8 @@ patternProperties: drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] - mediatek,drive-strength-adv: - description: | - Describe the specific driving setup property. - For I2C pins, the existing generic driving setup can only support - 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they - can support 0.125/0.25/0.5/1mA adjustment. If we enable specific - driving setup, the existing generic setup will be disabled. - The specific driving setup is controlled by E1E0EN. - When E1=0/E0=0, the strength is 0.125mA. - When E1=0/E0=1, the strength is 0.25mA. - When E1=1/E0=0, the strength is 0.5mA. - When E1=1/E0=1, the strength is 1mA. - EN is used to enable or disable the specific driving setup. - Valid arguments are described as below: - 0: (E1, E0, EN) = (0, 0, 0) - 1: (E1, E0, EN) = (0, 0, 1) - 2: (E1, E0, EN) = (0, 1, 0) - 3: (E1, E0, EN) = (0, 1, 1) - 4: (E1, E0, EN) = (1, 0, 0) - 5: (E1, E0, EN) = (1, 0, 1) - 6: (E1, E0, EN) = (1, 1, 0) - 7: (E1, E0, EN) = (1, 1, 1) - So the valid arguments are from 0 to 7. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3, 4, 5, 6, 7] + drive-strength-microamp: + enum: [125, 250, 500, 1000] bias-pull-down: oneOf: @@ -291,7 +270,7 @@ examples: pinmux = <PINMUX_GPIO127__FUNC_SCL0>, <PINMUX_GPIO128__FUNC_SDA0>; bias-pull-up = <MTK_PULL_SET_RSEL_001>; - mediatek,drive-strength-adv = <7>; + drive-strength-microamp = <1000>; }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index c90a132fbc79..e0e943e5b874 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -80,46 +80,30 @@ patternProperties: dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. enum: [2, 4, 6, 8, 10, 12, 14, 16] - mediatek,drive-strength-adv: - description: | - Describe the specific driving setup property. - For I2C pins, the existing generic driving setup can only support - 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they - can support 0.125/0.25/0.5/1mA adjustment. If we enable specific - driving setup, the existing generic setup will be disabled. - The specific driving setup is controlled by E1E0EN. - When E1=0/E0=0, the strength is 0.125mA. - When E1=0/E0=1, the strength is 0.25mA. - When E1=1/E0=0, the strength is 0.5mA. - When E1=1/E0=1, the strength is 1mA. - EN is used to enable or disable the specific driving setup. - Valid arguments are described as below: - 0: (E1, E0, EN) = (0, 0, 0) - 1: (E1, E0, EN) = (0, 0, 1) - 2: (E1, E0, EN) = (0, 1, 0) - 3: (E1, E0, EN) = (0, 1, 1) - 4: (E1, E0, EN) = (1, 0, 0) - 5: (E1, E0, EN) = (1, 0, 1) - 6: (E1, E0, EN) = (1, 1, 0) - 7: (E1, E0, EN) = (1, 1, 1) - So the valid arguments are from 0 to 7. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3, 4, 5, 6, 7] - - mediatek,pull-up-adv: - description: | - Pull up settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] - - bias-pull-down: true - - bias-pull-up: true + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_ + defines in dt-bindings/pinctrl/mt65xx.h. + - enum: [200, 201, 202, 203] + description: RSEL pull down type. See MTK_PULL_SET_RSEL_ + defines in dt-bindings/pinctrl/mt65xx.h. + + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_ + defines in dt-bindings/pinctrl/mt65xx.h. + - enum: [200, 201, 202, 203] + description: RSEL pull up type. See MTK_PULL_SET_RSEL_ + defines in dt-bindings/pinctrl/mt65xx.h. bias-disable: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml index c5b755514c46..66fe17e9e4d3 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml @@ -29,6 +29,8 @@ properties: description: gpio valid number range. maxItems: 1 + gpio-line-names: true + reg: description: | Physical address base for gpio base registers. There are 8 GPIO @@ -49,7 +51,7 @@ properties: description: The interrupt outputs to sysirq. maxItems: 1 - mediatek,rsel_resistance_in_si_unit: + mediatek,rsel-resistance-in-si-unit: type: boolean description: | Identifying i2c pins pull up/down type which is RSEL. It can support @@ -98,31 +100,8 @@ patternProperties: drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] - mediatek,drive-strength-adv: - description: | - Describe the specific driving setup property. - For I2C pins, the existing generic driving setup can only support - 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they - can support 0.125/0.25/0.5/1mA adjustment. If we enable specific - driving setup, the existing generic setup will be disabled. - The specific driving setup is controlled by E1E0EN. - When E1=0/E0=0, the strength is 0.125mA. - When E1=0/E0=1, the strength is 0.25mA. - When E1=1/E0=0, the strength is 0.5mA. - When E1=1/E0=1, the strength is 1mA. - EN is used to enable or disable the specific driving setup. - Valid arguments are described as below: - 0: (E1, E0, EN) = (0, 0, 0) - 1: (E1, E0, EN) = (0, 0, 1) - 2: (E1, E0, EN) = (0, 1, 0) - 3: (E1, E0, EN) = (0, 1, 1) - 4: (E1, E0, EN) = (1, 0, 0) - 5: (E1, E0, EN) = (1, 0, 1) - 6: (E1, E0, EN) = (1, 1, 0) - 7: (E1, E0, EN) = (1, 1, 1) - So the valid arguments are from 0 to 7. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3, 4, 5, 6, 7] + drive-strength-microamp: + enum: [125, 250, 500, 1000] bias-pull-down: oneOf: @@ -142,7 +121,7 @@ patternProperties: "MTK_PUPD_SET_R1R0_11" define in mt8195. For pull down type is RSEL, it can add RSEL define & resistance value(ohm) to set different resistance by identifying property - "mediatek,rsel_resistance_in_si_unit". + "mediatek,rsel-resistance-in-si-unit". It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" @@ -161,7 +140,7 @@ patternProperties: }; An example of using si unit resistance value(ohm): &pio { - mediatek,rsel_resistance_in_si_unit; + mediatek,rsel-resistance-in-si-unit; } pincontroller { i2c0_pin { @@ -190,7 +169,7 @@ patternProperties: "MTK_PUPD_SET_R1R0_11" define in mt8195. For pull up type is RSEL, it can add RSEL define & resistance value(ohm) to set different resistance by identifying property - "mediatek,rsel_resistance_in_si_unit". + "mediatek,rsel-resistance-in-si-unit". It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" @@ -209,7 +188,7 @@ patternProperties: }; An example of using si unit resistance value(ohm): &pio { - mediatek,rsel_resistance_in_si_unit; + mediatek,rsel-resistance-in-si-unit; } pincontroller { i2c0-pins { @@ -302,7 +281,7 @@ examples: pinmux = <PINMUX_GPIO8__FUNC_SDA0>, <PINMUX_GPIO9__FUNC_SCL0>; bias-disable; - mediatek,drive-strength-adv = <7>; + drive-strength-microamp = <1000>; }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml new file mode 100644 index 000000000000..e03530091478 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8909-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. MSM8909 TLMM block + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +description: | + This binding describes the Top Level Mode Multiplexer (TLMM) block found + in the MSM8909 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,msm8909-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + gpio-reserved-ranges: true + '#gpio-cells': true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-msm8909-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-msm8909-tlmm-state" + +$defs: + qcom-msm8909-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-7])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, + qdsd_data2, qdsd_data3 ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_wlan0, atest_wlan1, + bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, + blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1, + blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, + blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1, + blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, + blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam_mclk, + cci_async, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, + dbg_out, dmic0_clk, dmic0_data, ebi0_wrcdc, ebi2_a, ebi2_lcd, + ext_lpass, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gpio, + gsm0_tx, ldo_en, ldo_update, m_voc, mdp_vsync, modem_tsync, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, + pri_mi2s_data0_a, pri_mi2s_data0_b, pri_mi2s_data1_a, + pri_mi2s_data1_b, pri_mi2s_mclk_a, pri_mi2s_mclk_b, + pri_mi2s_sck_a, pri_mi2s_sck_b, pri_mi2s_ws_a, pri_mi2s_ws_b, + prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a, + qdss_tracedata_a, qdss_tracedata_b, sd_write, sec_mi2s, + smb_int, ssbi0, ssbi1, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt, + wcss_bt, wcss_fm, wcss_wlan ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@1000000 { + compatible = "qcom,msm8909-tlmm"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx { + pins = "gpio4"; + function = "blsp_uart1"; + bias-pull-up; + }; + + tx { + pins = "gpio5"; + function = "blsp_uart1"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 6f2efc3772cb..694898f382be 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -52,6 +52,7 @@ properties: - qcom,pmi8998-gpio - qcom,pmk8350-gpio - qcom,pmm8155au-gpio + - qcom,pmp8074-gpio - qcom,pmr735a-gpio - qcom,pmr735b-gpio - qcom,pms405-gpio @@ -158,6 +159,7 @@ allOf: compatible: contains: enum: + - qcom,pm8226-gpio - qcom,pm8350b-gpio - qcom,pm8950-gpio then: @@ -233,6 +235,7 @@ allOf: - qcom,pm8150b-gpio - qcom,pm8150l-gpio - qcom,pmc8180c-gpio + - qcom,pmp8074-gpio - qcom,pms405-gpio then: properties: @@ -415,6 +418,7 @@ $defs: - gpio1-gpio10 for pmi8994 - gpio1-gpio4 for pmk8350 - gpio1-gpio10 for pmm8155au + - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12) - gpio1-gpio4 for pmr735a - gpio1-gpio4 for pmr735b - gpio1-gpio12 for pms405 (holes on gpio1, gpio9 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index d32ee32776e8..33d1d37fdf6d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -19,6 +19,11 @@ properties: compatible: const: qcom,sc7280-lpass-lpi-pinctrl + qcom,adsp-bypass-mode: + description: + Tells ADSP is in bypass mode. + type: boolean + reg: minItems: 2 maxItems: 2 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml new file mode 100644 index 000000000000..3908807a8339 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6375-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM6375 TLMM block + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + This binding describes the Top Level Mode Multiplexer (TLMM) block found + in the SM6375 platform. + +allOf: + - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm6375-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + gpio-reserved-ranges: true + '#gpio-cells': true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-sm6375-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-sm6375-tlmm-state" + +$defs: + qcom-sm6375-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$" + - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_tsens, atest_tsens2, + atest_usb1, atest_usb10, atest_usb11, atest_usb12, + atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, + cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, + gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio, + gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, + m_voc, mclk, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, mss_lte, nav_gpio, + nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10, + phase_flag11, phase_flag12, phase_flag13, phase_flag14, + phase_flag15, phase_flag16, phase_flag17, phase_flag18, + phase_flag19, phase_flag2, phase_flag20, phase_flag21, + phase_flag22, phase_flag23, phase_flag24, phase_flag25, + phase_flag26, phase_flag27, phase_flag28, phase_flag29, + phase_flag3, phase_flag30, phase_flag31, phase_flag4, + phase_flag5, phase_flag6, phase_flag7, phase_flag8, + phase_flag9, pll_bist, pll_bypassnl, pll_clk, pll_reset, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, + qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, + qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, + qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, + qlink1_wmss, qup00, qup01, qup02, qup10, qup11_f1, qup11_f2, + qup12, qup13_f1, qup13_f2, qup14, sd_write, sdc1_tb, sdc2_tb, + sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, + uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac, + usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1 ] + + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@500000 { + compatible = "qcom,sm6375-tlmm"; + reg = <0x00500000 0x800000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 157>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx { + pins = "gpio18"; + function = "qup13_f2"; + bias-pull-up; + }; + + tx { + pins = "gpio19"; + function = "qup13_f2"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml index 2a57df75d832..4fc758fea7e6 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -45,6 +45,7 @@ properties: - renesas,pfc-r8a77995 # R-Car D3 - renesas,pfc-r8a779a0 # R-Car V3U - renesas,pfc-r8a779f0 # R-Car S4-8 + - renesas,pfc-r8a779g0 # R-Car V4H - renesas,pfc-sh73a0 # SH-Mobile AG5 reg: diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml new file mode 100644 index 000000000000..eac6245db7dc --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rzv2m-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M combined Pin and GPIO controller + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Phil Edworthy <phil.edworthy@renesas.com> + +description: + The Renesas RZ/V2M SoC features a combined Pin and GPIO controller. + Pin multiplexing and GPIO configuration is performed on a per-pin basis. + Each port features up to 16 pins, each of them configurable for GPIO function + (port mode) or in alternate function mode. + Up to 8 different alternate function modes exist for each single pin. + +properties: + compatible: + const: renesas,r9a09g011-pinctrl # RZ/V2M + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: + The first cell contains the global GPIO port index, constructed using the + RZV2M_GPIO() helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h> and the + second cell represents consumer flag as mentioned in ../gpio/gpio.txt + E.g. "RZV2M_GPIO(8, 1)" for P8_1. + + gpio-ranges: + maxItems: 1 + + interrupts: + description: INEXINT[0..38] corresponding to individual pin inputs. + maxItems: 39 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + Pin controller client devices use pin configuration subnodes (children + and grandchildren) for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + phandle: true + pinmux: + description: + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZV2M_PORT_PINMUX() + helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h>. + pins: true + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength-microamp: + # Superset of supported values + enum: [ 1600, 1800, 2000, 3200, 3800, 4000, 6400, 7800, 8000, + 9000, 9600, 11000, 12000, 13000, 18000 ] + slew-rate: + description: 0 is slow slew rate, 1 is fast slew rate + enum: [ 0, 1 ] + gpio-hog: true + gpios: true + output-high: true + output-low: true + line-name: true + + - type: object + properties: + phandle: true + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - interrupts + - clocks + - power-domains + - resets + +examples: + - | + #include <dt-bindings/pinctrl/rzv2m-pinctrl.h> + #include <dt-bindings/clock/r9a09g011-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl: pinctrl@b6250000 { + compatible = "renesas,r9a09g011-pinctrl"; + reg = <0xb6250000 0x800>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 352>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>; + resets = <&cpg R9A09G011_PFC_PRESETN>; + power-domains = <&cpg>; + + i2c2_pins: i2c2 { + pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */ + <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */ + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 335ffc1353b5..d35dcc4f0242 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -59,6 +59,7 @@ properties: patternProperties: '^gpio@[0-9a-f]*$': type: object + additionalProperties: false properties: gpio-controller: true '#gpio-cells': @@ -68,8 +69,7 @@ patternProperties: maxItems: 1 clocks: maxItems: 1 - reset: - minItems: 1 + resets: maxItems: 1 gpio-ranges: minItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml index d8e75b3e64f1..15092fdd4b5b 100644 --- a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml @@ -288,11 +288,14 @@ required: additionalProperties: false +allOf: + - $ref: "pinctrl.yaml#" + examples: - | #include <dt-bindings/pinctrl/sppctl-sp7021.h> - pinctl@9c000100 { + pinctrl@9c000100 { compatible = "sunplus,sp7021-pctl"; reg = <0x9c000100 0x100>, <0x9c000300 0x100>, <0x9c0032e4 0x1c>, <0x9c000080 0x20>; diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 2722dc7bb03d..1e2b9b627b12 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -274,6 +274,10 @@ patternProperties: slew-rate: enum: [0, 1] + output-enable: + description: + This will internally disable the tri-state for MIO pins. + drive-strength: description: Selects the drive strength for MIO pins, in mA. diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml index eec3b9c4c713..7e091eaffc18 100644 --- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml @@ -18,6 +18,7 @@ properties: enum: - mediatek,mt8183-scp - mediatek,mt8186-scp + - mediatek,mt8188-scp - mediatek,mt8192-scp - mediatek,mt8195-scp @@ -80,6 +81,7 @@ allOf: enum: - mediatek,mt8183-scp - mediatek,mt8186-scp + - mediatek,mt8188-scp then: properties: reg: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml index 947f94548d0e..3072af5f9d79 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml @@ -67,13 +67,28 @@ properties: minItems: 1 maxItems: 8 + interconnects: + maxItems: 1 + interrupts: minItems: 5 - maxItems: 6 + items: + - description: Watchdog interrupt + - description: Fatal interrupt + - description: Ready interrupt + - description: Handover interrupt + - description: Stop acknowledge interrupt + - description: Shutdown acknowledge interrupt interrupt-names: minItems: 5 - maxItems: 6 + items: + - const: wdog + - const: fatal + - const: ready + - const: handover + - const: stop-ack + - const: shutdown-ack resets: minItems: 1 @@ -116,7 +131,6 @@ properties: - description: Stop the modem qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string-array description: The names of the state bits used for SMP2P output items: - const: stop @@ -134,13 +148,13 @@ properties: three offsets within syscon for q6, modem and nc halt registers. smd-edge: - type: object + $ref: /schemas/remoteproc/qcom,smd-edge.yaml# description: Qualcomm Shared Memory subnode which represents communication edge, channels and devices related to the ADSP. glink-edge: - type: object + $ref: /schemas/remoteproc/qcom,glink-edge.yaml# description: Qualcomm G-Link subnode which represents communication edge, channels and devices related to the ADSP. @@ -315,19 +329,9 @@ allOf: then: properties: interrupts: - items: - - description: Watchdog interrupt - - description: Fatal interrupt - - description: Ready interrupt - - description: Handover interrupt - - description: Stop acknowledge interrupt + maxItems: 5 interrupt-names: - items: - - const: wdog - - const: fatal - - const: ready - - const: handover - - const: stop-ack + maxItems: 5 - if: properties: @@ -345,21 +349,9 @@ allOf: then: properties: interrupts: - items: - - description: Watchdog interrupt - - description: Fatal interrupt - - description: Ready interrupt - - description: Handover interrupt - - description: Stop acknowledge interrupt - - description: Shutdown acknowledge interrupt + minItems: 6 interrupt-names: - items: - - const: wdog - - const: fatal - - const: ready - - const: handover - - const: stop-ack - - const: shutdown-ack + minItems: 6 - if: properties: @@ -379,6 +371,8 @@ allOf: - qcom,msm8226-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8998-adsp-pas + - qcom,sm8150-adsp-pas + - qcom,sm8150-cdsp-pas then: properties: power-domains: @@ -447,19 +441,6 @@ allOf: compatible: contains: enum: - - qcom,sm8150-adsp-pas - - qcom,sm8150-cdsp-pas - then: - properties: - power-domains: - items: - - description: CX power domain - - - if: - properties: - compatible: - contains: - enum: - qcom,sc7280-mpss-pas - qcom,sdx55-mpss-pas - qcom,sm6350-mpss-pas @@ -594,11 +575,12 @@ allOf: examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> adsp { compatible = "qcom,msm8974-adsp-pil"; - interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, @@ -620,7 +602,7 @@ examples: qcom,smem-state-names = "stop"; smd-edge { - interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 8>; qcom,smd-edge = <1>; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml new file mode 100644 index 000000000000..fa69f7b21eed --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,glink-edge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm G-Link Edge communication channel nodes + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + Qualcomm G-Link subnode represents communication edge, channels and devices + related to the remote processor. + +properties: + $nodename: + const: "glink-edge" + + apr: + $ref: /schemas/soc/qcom/qcom,apr.yaml# + description: + Qualcomm APR/GPR (Asynchronous/Generic Packet Router) + + fastrpc: + type: object + description: + See Documentation/devicetree/bindings/misc/qcom,fastrpc.txt + + interrupts: + maxItems: 1 + + label: + description: The names of the state bits used for SMP2P output + + mboxes: + maxItems: 1 + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + ID of the shared memory used by GLINK for communication with remote + processor. + +required: + - interrupts + - label + - mboxes + - qcom,remote-pid + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + + remoteproc@8a00000 { + reg = <0x08a00000 0x10000>; + // ... + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "wpss"; + qcom,remote-pid = <13>; + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 658f96fbc4fe..d0ebd16ee0e1 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -14,8 +14,6 @@ on the Qualcomm Hexagon core. "qcom,msm8974-mss-pil" "qcom,msm8996-mss-pil" "qcom,msm8998-mss-pil" - "qcom,sc7180-mss-pil" - "qcom,sc7280-mss-pil" "qcom,sdm845-mss-pil" - reg: @@ -47,8 +45,6 @@ on the Qualcomm Hexagon core. must be "wdog", "fatal", "ready", "handover", "stop-ack" qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: - qcom,sc7180-mss-pil: - qcom,sc7280-mss-pil: qcom,sdm845-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack" @@ -86,11 +82,6 @@ on the Qualcomm Hexagon core. qcom,msm8998-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "qdss" - qcom,sc7180-mss-pil: - must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi", - "nav" - qcom,sc7280-mss-pil: - must be "iface", "xo", "snoc_axi", "offline", "pka" qcom,sdm845-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng" @@ -102,7 +93,7 @@ on the Qualcomm Hexagon core. reference to the list of 3 reset-controllers for the wcss sub-system reference to the list of 2 reset-controllers for the modem - sub-system on SC7180, SC7280, SDM845 SoCs + sub-system on SDM845 SoCs - reset-names: Usage: required @@ -111,7 +102,7 @@ on the Qualcomm Hexagon core. must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" for the wcss sub-system must be "mss_restart", "pdc_reset" for the modem - sub-system on SC7180, SC7280, SDM845 SoCs + sub-system on SDM845 SoCs For devices where the mba and mpss sub-nodes are not specified, mba/mpss region should be referenced as follows: @@ -176,10 +167,6 @@ For the compatible string below the following supplies are required: qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: must be "cx", "mx" - qcom,sc7180-mss-pil: - must be "cx", "mx", "mss" - qcom,sc7280-mss-pil: - must be "cx", "mss" qcom,sdm845-mss-pil: must be "cx", "mx", "mss" @@ -205,36 +192,6 @@ For the compatible string below the following supplies are required: Definition: a phandle reference to a syscon representing TCSR followed by the three offsets within syscon for q6, modem and nc halt registers. - a phandle reference to a syscon representing TCSR followed - by the four offsets within syscon for q6, modem, nc and vq6 - halt registers on SC7280 SoCs. - -For the compatible strings below the following phandle references are required: - "qcom,sc7180-mss-pil" -- qcom,spare-regs: - Usage: required - Value type: <prop-encoded-array> - Definition: a phandle reference to a syscon representing TCSR followed - by the offset within syscon for conn_box_spare0 register - used by the modem sub-system running on SC7180 SoC. - -For the compatible strings below the following phandle references are required: - "qcom,sc7280-mss-pil" -- qcom,ext-regs: - Usage: required - Value type: <prop-encoded-array> - Definition: two phandle references to syscons representing TCSR_REG and - TCSR register space followed by the two offsets within the syscon - to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off - registers respectively. - -- qcom,qaccept-regs: - Usage: required - Value type: <prop-encoded-array> - Definition: a phandle reference to a syscon representing TCSR followed - by the three offsets within syscon for mdm, cx and axi - qaccept registers used by the modem sub-system running on - SC7280 SoC. The Hexagon node must contain iommus property as described in ../iommu/iommu.txt on platforms which do not have TrustZone. @@ -257,29 +214,23 @@ related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and The following example describes the resources needed to boot control the Hexagon, as it is found on MSM8974 boards. - modem-rproc@fc880000 { - compatible = "qcom,q6v5-pil"; - reg = <0xfc880000 0x100>, - <0xfc820000 0x020>; + remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; reg-names = "qdsp6", "rmb"; - interrupts-extended = <&intc 0 24 1>, - <&modem_smp2p_in 0 0>, - <&modem_smp2p_in 1 0>, - <&modem_smp2p_in 2 0>, - <&modem_smp2p_in 3 0>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>; - clock-names = "iface", "bus", "mem"; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; resets = <&gcc GCC_MSS_RESTART>; reset-names = "mss_restart"; @@ -289,6 +240,8 @@ Hexagon, as it is found on MSM8974 boards. mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -299,4 +252,13 @@ Hexagon, as it is found on MSM8974 boards. mpss { memory-region = <&mpss_region>; }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml index 31413cfe10db..06f5f93f62a9 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml @@ -90,7 +90,6 @@ properties: - description: Stop the modem qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string description: The names of the state bits used for SMP2P output items: - const: stop diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml new file mode 100644 index 000000000000..e76c861165dd --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml @@ -0,0 +1,245 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-mss-pil.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 MSS Peripheral Image Loader + +maintainers: + - Sibi Sankar <quic_sibis@quicinc.com> + +description: + This document describes the hardware for a component that loads and boots firmware + on the Qualcomm Technology Inc. SC7180 Modem Hexagon Core. + +properties: + compatible: + enum: + - qcom,sc7180-mss-pil + + reg: + items: + - description: MSS QDSP6 registers + - description: RMB registers + + reg-names: + items: + - const: qdsp6 + - const: rmb + + iommus: + items: + - description: MSA Stream 1 + - description: MSA Stream 2 + + interrupts: + items: + - description: Watchdog interrupt + - description: Fatal interrupt + - description: Ready interrupt + - description: Handover interrupt + - description: Stop acknowledge interrupt + - description: Shutdown acknowledge interrupt + + interrupt-names: + items: + - const: wdog + - const: fatal + - const: ready + - const: handover + - const: stop-ack + - const: shutdown-ack + + clocks: + items: + - description: GCC MSS IFACE clock + - description: GCC MSS BUS clock + - description: GCC MSS NAV clock + - description: GCC MSS SNOC_AXI clock + - description: GCC MSS MFAB_AXIS clock + - description: RPMH XO clock + + clock-names: + items: + - const: iface + - const: bus + - const: nav + - const: snoc_axi + - const: mnoc_axi + - const: xo + + power-domains: + items: + - description: CX power domain + - description: MX power domain + - description: MSS power domain + + power-domain-names: + items: + - const: cx + - const: mx + - const: mss + + resets: + items: + - description: AOSS restart + - description: PDC reset + + reset-names: + items: + - const: mss_restart + - const: pdc_reset + + memory-region: + items: + - description: MBA reserved region + - description: modem reserved region + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string-array + items: + - description: Name of MBA firmware + - description: Name of modem firmware + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Halt registers are used to halt transactions of various sub-components + within MSS. + items: + - items: + - description: phandle to TCSR_MUTEX registers + - description: offset to the Q6 halt register + - description: offset to the modem halt register + - description: offset to the nc halt register + + qcom,spare-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Spare registers are multipurpose registers used for errata + handling. + items: + - items: + - description: phandle to TCSR_MUTEX registers + - description: offset to the conn_box_spare0 register + + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM. + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: States used by the AP to signal the Hexagon core + items: + - description: Stop the modem + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output + const: stop + + glink-edge: + $ref: qcom,glink-edge.yaml# + description: + Qualcomm G-Link subnode which represents communication edge, channels + and devices related to the DSP. + + properties: + interrupts: + items: + - description: IRQ from MSS to GLINK + + mboxes: + items: + - description: Mailbox for communication between APPS and MSS + + label: + const: modem + + apr: false + fastrpc: false + +required: + - compatible + - reg + - reg-names + - iommus + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + - power-domain-names + - resets + - reset-names + - qcom,halt-regs + - qcom,spare-regs + - memory-region + - qcom,qmp + - qcom,smem-states + - qcom,smem-state-names + - glink-edge + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/reset/qcom,sdm845-aoss.h> + #include <dt-bindings/reset/qcom,sdm845-pdc.h> + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7180-mss-pil"; + reg = <0x04080000 0x10000>, <0x04180000 0x48>; + reg-names = "qdsp6", "rmb"; + + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", + "mnoc_axi", "xo"; + + power-domains = <&rpmhpd SC7180_CX>, + <&rpmhpd SC7180_MX>, + <&rpmhpd SC7180_MSS>; + power-domain-names = "cx", "mx", "mss"; + + memory-region = <&mba_mem>, <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,spare-regs = <&tcsr_regs 0xb3e4>; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 12>; + qcom,remote-pid = <1>; + label = "modem"; + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml new file mode 100644 index 000000000000..da1a5de3d38b --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml @@ -0,0 +1,266 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 MSS Peripheral Image Loader + +maintainers: + - Sibi Sankar <quic_sibis@quicinc.com> + +description: + This document describes the hardware for a component that loads and boots firmware + on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core. + +properties: + compatible: + enum: + - qcom,sc7280-mss-pil + + reg: + items: + - description: MSS QDSP6 registers + - description: RMB registers + + reg-names: + items: + - const: qdsp6 + - const: rmb + + iommus: + items: + - description: MSA Stream 1 + - description: MSA Stream 2 + + interconnects: + items: + - description: Path leading to system memory + + interrupts: + items: + - description: Watchdog interrupt + - description: Fatal interrupt + - description: Ready interrupt + - description: Handover interrupt + - description: Stop acknowledge interrupt + - description: Shutdown acknowledge interrupt + + interrupt-names: + items: + - const: wdog + - const: fatal + - const: ready + - const: handover + - const: stop-ack + - const: shutdown-ack + + clocks: + items: + - description: GCC MSS IFACE clock + - description: GCC MSS OFFLINE clock + - description: GCC MSS SNOC_AXI clock + - description: RPMH PKA clock + - description: RPMH XO clock + + clock-names: + items: + - const: iface + - const: offline + - const: snoc_axi + - const: pka + - const: xo + + power-domains: + items: + - description: CX power domain + - description: MSS power domain + + power-domain-names: + items: + - const: cx + - const: mss + + resets: + items: + - description: AOSS restart + - description: PDC reset + + reset-names: + items: + - const: mss_restart + - const: pdc_reset + + memory-region: + items: + - description: MBA reserved region + - description: modem reserved region + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string-array + items: + - description: Name of MBA firmware + - description: Name of modem firmware + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Halt registers are used to halt transactions of various sub-components + within MSS. + items: + - items: + - description: phandle to TCSR_MUTEX registers + - description: offset to the Q6 halt register + - description: offset to the modem halt register + - description: offset to the nc halt register + - description: offset to the vq6 halt register + + qcom,ext-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: EXT registers are used for various power related functionality + items: + - items: + - description: phandle to TCSR_REG registers + - description: offset to the force_clk_en register + - description: offset to the rscc_disable register + - items: + - description: phandle to TCSR_MUTEX registers + - description: offset to the axim1_clk_off register + - description: offset to the crypto_clk_off register + + qcom,qaccept-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: QACCEPT registers are used to bring up/down Q-channels + items: + - items: + - description: phandle to TCSR_MUTEX registers + - description: offset to the mdm qaccept register + - description: offset to the cx qaccept register + - description: offset to the axi qaccept register + + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM. + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: States used by the AP to signal the Hexagon core + items: + - description: Stop the modem + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output + const: stop + + glink-edge: + $ref: qcom,glink-edge.yaml# + description: + Qualcomm G-Link subnode which represents communication edge, channels + and devices related to the DSP. + + properties: + interrupts: + items: + - description: IRQ from MSS to GLINK + + mboxes: + items: + - description: Mailbox for communication between APPS and MSS + + label: + const: modem + + apr: false + fastrpc: false + +required: + - compatible + - reg + - reg-names + - iommus + - interconnects + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + - power-domain-names + - resets + - reset-names + - qcom,halt-regs + - qcom,ext-regs + - qcom,qaccept-regs + - memory-region + - qcom,qmp + - qcom,smem-states + - qcom,smem-state-names + - glink-edge + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/reset/qcom,sdm845-aoss.h> + #include <dt-bindings/reset/qcom,sdm845-pdc.h> + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7280-mss-pil"; + reg = <0x04080000 0x10000>, <0x04180000 0x48>; + reg-names = "qdsp6", "rmb"; + + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_OFFLINE_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&rpmhcc RPMH_PKA_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&mba_mem>, <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; + qcom,ext-regs = <&tcsr 0x10000 0x10004>, <&tcsr_mutex 0x26004 0x26008>; + qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml index d99a729d2710..3f06d66cbe47 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml @@ -76,7 +76,7 @@ properties: - const: pdc_sync memory-region: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core firmware-name: @@ -102,13 +102,12 @@ properties: - description: Stop the modem qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string description: The names of the state bits used for SMP2P output const: stop glink-edge: - type: object - description: | + $ref: qcom,glink-edge.yaml# + description: Qualcomm G-Link subnode which represents communication edge, channels and devices related to the ADSP. @@ -122,21 +121,11 @@ properties: - description: Mailbox for communication between APPS and WPSS label: - description: The names of the state bits used for SMP2P output items: - const: wpss - qcom,remote-pid: - $ref: /schemas/types.yaml#/definitions/uint32 - description: ID of the shared memory used by GLINK for communication with WPSS - - required: - - interrupts - - mboxes - - label - - qcom,remote-pid - - additionalProperties: false + apr: false + fastrpc: false required: - compatible diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml index 1535bbbe25da..20df83a96ef3 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml @@ -90,7 +90,6 @@ properties: - description: Stop the modem qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string description: The names of the state bits used for SMP2P output items: - const: stop diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml new file mode 100644 index 000000000000..06eebf791e32 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,smd-edge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SMD Edge communication channel nodes + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + Qualcomm SMD subnode represents a remote subsystem or a remote processor of + some sort - or in SMD language an "edge". The name of the edges are not + important. + See also Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml + +properties: + $nodename: + const: "smd-edge" + + interrupts: + maxItems: 1 + + label: + description: + Name of the edge, used for debugging and identification purposes. The + node name will be used if this is not present. + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the + remote processor. + + qcom,smd-edge: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the remote processor in the smd channel allocation + table. + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier for the remote processor as known by the rest of the + system. + +required: + - interrupts + - qcom,smd-edge + +oneOf: + - required: + - mboxes + - required: + - qcom,ipc + +additionalProperties: true + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + + remoteproc { + // ... + + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml index d7c3a78e37e6..cd55d80137f7 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml @@ -36,17 +36,18 @@ properties: enum: - ti,am3356-pru # for AM335x SoC family (AM3356+ SoCs only) - ti,am4376-pru # for AM437x SoC family (AM4376+ SoCs only) + - ti,am5728-pru # for AM57xx SoC family + - ti,am625-pru # for PRUs in K3 AM62x SoC family - ti,am642-pru # for PRUs in K3 AM64x SoC family - ti,am642-rtu # for RTUs in K3 AM64x SoC family - ti,am642-tx-pru # for Tx_PRUs in K3 AM64x SoC family - - ti,am5728-pru # for AM57xx SoC family - - ti,k2g-pru # for 66AK2G SoC family - ti,am654-pru # for PRUs in K3 AM65x SoC family - ti,am654-rtu # for RTUs in K3 AM65x SoC family - ti,am654-tx-pru # for Tx_PRUs in K3 AM65x SR2.0 SoCs - ti,j721e-pru # for PRUs in K3 J721E SoC family - ti,j721e-rtu # for RTUs in K3 J721E SoC family - ti,j721e-tx-pru # for Tx_PRUs in K3 J721E SoC family + - ti,k2g-pru # for 66AK2G SoC family reg: items: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml index bca07bb13ebf..62bebb5f83bc 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml @@ -28,44 +28,6 @@ patternProperties: edges are not important. properties: - interrupts: - maxItems: 1 - - label: - $ref: /schemas/types.yaml#/definitions/string - description: - Name of the edge, used for debugging and identification purposes. The - node name will be used if this is not present. - - mboxes: - maxItems: 1 - description: - Reference to the mailbox representing the outgoing doorbell in APCS for - this client. - - qcom,ipc: - $ref: /schemas/types.yaml#/definitions/phandle-array - items: - - items: - - description: phandle to a syscon node representing the APCS registers - - description: u32 representing offset to the register within the syscon - - description: u32 representing the ipc bit within the register - description: - Three entries specifying the outgoing ipc bit used for signaling the - remote processor. - - qcom,smd-edge: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The identifier of the remote processor in the smd channel allocation - table. - - qcom,remote-pid: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The identifier for the remote processor as known by the rest of the - system. - rpm-requests: type: object description: @@ -89,17 +51,7 @@ patternProperties: additionalProperties: true - required: - - interrupts - - qcom,smd-edge - - oneOf: - - required: - - mboxes - - required: - - qcom,ipc - - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index 2bd6b4a52637..d8ac0be36e6c 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -24,6 +24,7 @@ properties: - qcom,apss-wdt-sc8280xp - qcom,apss-wdt-sdm845 - qcom,apss-wdt-sdx55 + - qcom,apss-wdt-sdx65 - qcom,apss-wdt-sm6350 - qcom,apss-wdt-sm8150 - qcom,apss-wdt-sm8250 diff --git a/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml b/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml index 11b220a5e0f6..099245fe7b10 100644 --- a/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml @@ -29,6 +29,7 @@ properties: - realtek,rtl8380-wdt - realtek,rtl8390-wdt - realtek,rtl9300-wdt + - realtek,rtl9310-wdt reg: maxItems: 1 diff --git a/Documentation/driver-api/cxl/memory-devices.rst b/Documentation/driver-api/cxl/memory-devices.rst index db476bb170b6..5149ecdc53c7 100644 --- a/Documentation/driver-api/cxl/memory-devices.rst +++ b/Documentation/driver-api/cxl/memory-devices.rst @@ -362,6 +362,14 @@ CXL Core .. kernel-doc:: drivers/cxl/core/mbox.c :doc: cxl mbox +CXL Regions +----------- +.. kernel-doc:: drivers/cxl/core/region.c + :doc: cxl core region + +.. kernel-doc:: drivers/cxl/core/region.c + :identifiers: + External Interfaces =================== diff --git a/Documentation/fault-injection/fault-injection.rst b/Documentation/fault-injection/fault-injection.rst index eb9c2d9a4f5f..17779a2772e5 100644 --- a/Documentation/fault-injection/fault-injection.rst +++ b/Documentation/fault-injection/fault-injection.rst @@ -169,6 +169,13 @@ configuration of fault-injection capabilities. default is 'N', setting it to 'Y' will disable disconnect injection on the RPC server. +- /sys/kernel/debug/fail_sunrpc/ignore-cache-wait: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable cache wait + injection on the RPC server. + - /sys/kernel/debug/fail_function/inject: Format: { 'function-name' | '!function-name' | '' } diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index a7173843a294..7fb398649f51 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -672,7 +672,7 @@ Future kconfig work Work on kconfig is welcomed on both areas of clarifying semantics and on evaluating the use of a full SAT solver for it. A full SAT solver can be desirable to enable more complex dependency mappings and / or queries, -for instance on possible use case for a SAT solver could be that of handling +for instance one possible use case for a SAT solver could be that of handling the current known recursive dependency issues. It is not known if this would address such issues but such evaluation is desirable. If support for a full SAT solver proves too complex or that it cannot address recursive dependency issues |