diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 72 | ||||
| -rw-r--r-- | Documentation/leds/leds-lp55xx.txt | 30 |
2 files changed, 98 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt index d5176882d8b9..a61727f9a6d1 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt @@ -1,7 +1,7 @@ Binding for TI/National Semiconductor LP55xx Led Drivers Required properties: -- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562" +- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562" or "ti,lp8501" - reg: I2C slave address - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external) @@ -11,6 +11,11 @@ Each child has own specific current settings Optional properties: - label: Used for naming LEDs +- pwr-sel: LP8501 specific property. Power selection for output channels. + 0: D1~9 are connected to VDD + 1: D1~6 with VDD, D7~9 with VOUT + 2: D1~6 with VOUT, D7~9 with VDD + 3: D1~9 are connected to VOUT Alternatively, each child can have specific channel name - chan-name: Name of each channel name @@ -145,3 +150,68 @@ lp5562@30 { max-cur = /bits/ 8 <0x60>; }; }; + +example 4) LP8501 +9 channels are defined. The 'pwr-sel' is LP8501 specific property. +Others are same as LP5523. + +lp8501@32 { + compatible = "ti,lp8501"; + reg = <0x32>; + clock-mode = /bits/ 8 <2>; + pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ + + chan0 { + chan-name = "d1"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan1 { + chan-name = "d2"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan2 { + chan-name = "d3"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan3 { + chan-name = "d4"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan4 { + chan-name = "d5"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan5 { + chan-name = "d6"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan6 { + chan-name = "d7"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan7 { + chan-name = "d8"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan8 { + chan-name = "d9"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; +}; diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt index eec8fa2ffe4e..82713ff92eb3 100644 --- a/Documentation/leds/leds-lp55xx.txt +++ b/Documentation/leds/leds-lp55xx.txt @@ -1,11 +1,11 @@ -LP5521/LP5523/LP55231 Common Driver -=================================== +LP5521/LP5523/LP55231/LP5562/LP8501 Common Driver +================================================= Authors: Milo(Woogyom) Kim <milo.kim@ti.com> Description ----------- -LP5521, LP5523/55231 and LP5562 have common features as below. +LP5521, LP5523/55231, LP5562 and LP8501 have common features as below. Register access via the I2C Device initialization/deinitialization @@ -109,6 +109,30 @@ As soon as 'loading' is set to 0, registered callback is called. Inside the callback, the selected engine is loaded and memory is updated. To run programmed pattern, 'run_engine' attribute should be enabled. +The pattern sqeuence of LP8501 is same as LP5523. +However pattern data is specific. +Ex 1) Engine 1 is used +echo 1 > /sys/bus/i2c/devices/xxxx/select_engine +echo 1 > /sys/class/firmware/lp8501/loading +echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data +echo 0 > /sys/class/firmware/lp8501/loading +echo 1 > /sys/bus/i2c/devices/xxxx/run_engine + +Ex 2) Engine 2 and 3 are used at the same time +echo 2 > /sys/bus/i2c/devices/xxxx/select_engine +sleep 1 +echo 1 > /sys/class/firmware/lp8501/loading +echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data +echo 0 > /sys/class/firmware/lp8501/loading +sleep 1 +echo 3 > /sys/bus/i2c/devices/xxxx/select_engine +sleep 1 +echo 1 > /sys/class/firmware/lp8501/loading +echo "9d0340ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data +echo 0 > /sys/class/firmware/lp8501/loading +sleep 1 +echo 1 > /sys/class/leds/d1/device/run_engine + ( 'run_engine' and 'firmware_cb' ) The sequence of running the program data is common. But each device has own specific register addresses for commands. |