diff options
Diffstat (limited to 'Documentation/userspace-api/media/v4l')
89 files changed, 1318 insertions, 769 deletions
diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst index 1b0fdc160533..e991ba73d873 100644 --- a/Documentation/userspace-api/media/v4l/buffer.rst +++ b/Documentation/userspace-api/media/v4l/buffer.rst @@ -157,7 +157,7 @@ of appropriately sized buffers for each use case). struct v4l2_buffer ================== -.. tabularcolumns:: |p{2.8cm}|p{2.5cm}|p{1.6cm}|p{10.2cm}| +.. tabularcolumns:: |p{2.9cm}|p{2.4cm}|p{12.0cm}| .. cssclass:: longtable @@ -314,7 +314,7 @@ struct v4l2_buffer struct v4l2_plane ================= -.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}| +.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{10.3cm}| .. cssclass:: longtable @@ -389,7 +389,7 @@ enum v4l2_buf_type .. cssclass:: longtable -.. tabularcolumns:: |p{7.8cm}|p{0.6cm}|p{9.1cm}| +.. tabularcolumns:: |p{7.8cm}|p{0.6cm}|p{8.9cm}| .. flat-table:: :header-rows: 0 @@ -452,16 +452,16 @@ Buffer Flags .. raw:: latex - \small + \footnotesize -.. tabularcolumns:: |p{7.0cm}|p{2.1cm}|p{8.4cm}| +.. tabularcolumns:: |p{6.5cm}|p{1.8cm}|p{9.0cm}| .. cssclass:: longtable .. flat-table:: :header-rows: 0 :stub-columns: 0 - :widths: 3 1 4 + :widths: 65 18 70 * .. _`V4L2-BUF-FLAG-MAPPED`: @@ -585,7 +585,7 @@ Buffer Flags - ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` - 0x00000200 - - Only valid if ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` is + - Only valid if struct :c:type:`v4l2_requestbuffers` flag ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` is set. It is typically used with stateless decoders where multiple output buffers each decode to a slice of the decoded frame. Applications can set this flag when queueing the output buffer @@ -681,7 +681,7 @@ Buffer Flags enum v4l2_memory ================ -.. tabularcolumns:: |p{5.0cm}|p{0.8cm}|p{11.7cm}| +.. tabularcolumns:: |p{5.0cm}|p{0.8cm}|p{11.5cm}| .. flat-table:: :header-rows: 0 @@ -715,7 +715,7 @@ The :c:type:`v4l2_buffer_timecode` structure is designed to hold a struct v4l2_timecode -------------------- -.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{12.3cm}| +.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{13.1cm}| .. flat-table:: :header-rows: 0 @@ -751,8 +751,6 @@ struct v4l2_timecode Timecode Types -------------- -.. tabularcolumns:: |p{5.6cm}|p{0.8cm}|p{11.1cm}| - .. flat-table:: :header-rows: 0 :stub-columns: 0 @@ -780,7 +778,7 @@ Timecode Types Timecode Flags -------------- -.. tabularcolumns:: |p{6.6cm}|p{1.4cm}|p{9.5cm}| +.. tabularcolumns:: |p{6.6cm}|p{1.4cm}|p{9.3cm}| .. flat-table:: :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/colorspaces-details.rst b/Documentation/userspace-api/media/v4l/colorspaces-details.rst index 126f66482a0d..26a4ace42ca5 100644 --- a/Documentation/userspace-api/media/v4l/colorspaces-details.rst +++ b/Documentation/userspace-api/media/v4l/colorspaces-details.rst @@ -17,10 +17,6 @@ PAL and by SDTV in general. The default transfer function is range. The chromaticities of the primary colors and the white reference are: - - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: SMPTE 170M Chromaticities :header-rows: 1 :stub-columns: 0 @@ -98,10 +94,6 @@ default Y'CbCr encoding is ``V4L2_YCBCR_ENC_709``. The default Y'CbCr quantization is limited range. The chromaticities of the primary colors and the white reference are: - - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: Rec. 709 Chromaticities :header-rows: 1 :stub-columns: 0 @@ -225,10 +217,6 @@ would break how applications interpret the quantization range. The chromaticities of the primary colors and the white reference are: - - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: sRGB Chromaticities :header-rows: 1 :stub-columns: 0 @@ -308,9 +296,6 @@ would break how applications interpret the quantization range. The chromaticities of the primary colors and the white reference are: - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: opRGB Chromaticities :header-rows: 1 :stub-columns: 0 @@ -373,10 +358,6 @@ definition television (UHDTV). The default transfer function is ``V4L2_YCBCR_ENC_BT2020``. The default Y'CbCr quantization is limited range. The chromaticities of the primary colors and the white reference are: - - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: BT.2020 Chromaticities :header-rows: 1 :stub-columns: 0 @@ -478,9 +459,6 @@ is ``V4L2_XFER_FUNC_DCI_P3``. The default Y'CbCr encoding is The chromaticities of the primary colors and the white reference are: - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: DCI-P3 Chromaticities :header-rows: 1 :stub-columns: 0 @@ -532,9 +510,6 @@ quantization is limited range. The chromaticities of the primary colors and the white reference are: - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: SMPTE 240M Chromaticities :header-rows: 1 :stub-columns: 0 @@ -603,9 +578,6 @@ limited range. The chromaticities of the primary colors and the white reference are: - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: NTSC 1953 Chromaticities :header-rows: 1 :stub-columns: 0 @@ -683,9 +655,6 @@ range. The chromaticities of the primary colors and the white reference are: - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: EBU Tech. 3213 Chromaticities :header-rows: 1 :stub-columns: 0 diff --git a/Documentation/userspace-api/media/v4l/common.rst b/Documentation/userspace-api/media/v4l/common.rst index 8c263c5a85d8..ea0435182e44 100644 --- a/Documentation/userspace-api/media/v4l/common.rst +++ b/Documentation/userspace-api/media/v4l/common.rst @@ -51,6 +51,7 @@ applicable to all devices. ext-ctrls-fm-tx ext-ctrls-fm-rx ext-ctrls-detect + ext-ctrls-colorimetry fourcc format planar-apis diff --git a/Documentation/userspace-api/media/v4l/control.rst b/Documentation/userspace-api/media/v4l/control.rst index 4e5652eb6126..f8d0b923da20 100644 --- a/Documentation/userspace-api/media/v4l/control.rst +++ b/Documentation/userspace-api/media/v4l/control.rst @@ -154,10 +154,13 @@ Control IDs ``V4L2_CID_POWER_LINE_FREQUENCY`` ``(enum)`` Enables a power line frequency filter to avoid flicker. Possible values for ``enum v4l2_power_line_frequency`` are: - ``V4L2_CID_POWER_LINE_FREQUENCY_DISABLED`` (0), - ``V4L2_CID_POWER_LINE_FREQUENCY_50HZ`` (1), - ``V4L2_CID_POWER_LINE_FREQUENCY_60HZ`` (2) and - ``V4L2_CID_POWER_LINE_FREQUENCY_AUTO`` (3). + + ========================================== == + ``V4L2_CID_POWER_LINE_FREQUENCY_DISABLED`` 0 + ``V4L2_CID_POWER_LINE_FREQUENCY_50HZ`` 1 + ``V4L2_CID_POWER_LINE_FREQUENCY_60HZ`` 2 + ``V4L2_CID_POWER_LINE_FREQUENCY_AUTO`` 3 + ========================================== == ``V4L2_CID_HUE_AUTO`` ``(boolean)`` Enables automatic hue control by the device. The effect of setting @@ -197,7 +200,7 @@ Control IDs -.. tabularcolumns:: |p{5.5cm}|p{12cm}| +.. tabularcolumns:: |p{5.7cm}|p{11.8cm}| .. flat-table:: :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/dev-meta.rst b/Documentation/userspace-api/media/v4l/dev-meta.rst index 8ec3a73dcae4..0e7e1ee1471a 100644 --- a/Documentation/userspace-api/media/v4l/dev-meta.rst +++ b/Documentation/userspace-api/media/v4l/dev-meta.rst @@ -49,7 +49,7 @@ to 0. .. c:type:: v4l2_meta_format -.. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}| +.. tabularcolumns:: |p{1.4cm}|p{2.4cm}|p{13.5cm}| .. flat-table:: struct v4l2_meta_format :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/dev-overlay.rst b/Documentation/userspace-api/media/v4l/dev-overlay.rst index 07cc92564c16..4f4b23b95b9b 100644 --- a/Documentation/userspace-api/media/v4l/dev-overlay.rst +++ b/Documentation/userspace-api/media/v4l/dev-overlay.rst @@ -37,6 +37,10 @@ capturing and overlay. Optionally these drivers may also permit capturing and overlay with a single file descriptor for compatibility with V4L and earlier versions of V4L2. [#f1]_ +A common application of two file descriptors is the X11 +:ref:`Xv/V4L <xvideo>` interface driver and a V4L2 application. +While the X server controls video overlay, the application can take +advantage of memory mapping and DMA. Querying Capabilities ===================== @@ -289,11 +293,6 @@ To start or stop the frame buffer overlay applications call the :ref:`VIDIOC_OVERLAY` ioctl. .. [#f1] - A common application of two file descriptors is the XFree86 - :ref:`Xv/V4L <xvideo>` interface driver and a V4L2 application. - While the X server controls video overlay, the application can take - advantage of memory mapping and DMA. - In the opinion of the designers of this API, no driver writer taking the efforts to support simultaneous capturing and overlay will restrict this ability by requiring a single file descriptor, as in diff --git a/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst index 3f43a01ba938..58f97c3a7792 100644 --- a/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst +++ b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst @@ -97,7 +97,7 @@ VBI devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does. :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional. -.. tabularcolumns:: |p{1.6cm}|p{4.2cm}|p{11.7cm}| +.. tabularcolumns:: |p{1.6cm}|p{4.2cm}|p{11.5cm}| .. c:type:: v4l2_vbi_format @@ -180,7 +180,7 @@ and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does - This array is reserved for future extensions. Drivers and applications must set it to zero. -.. tabularcolumns:: |p{4.4cm}|p{1.5cm}|p{11.6cm}| +.. tabularcolumns:: |p{4.4cm}|p{1.5cm}|p{11.4cm}| .. _vbifmt-flags: diff --git a/Documentation/userspace-api/media/v4l/dev-rds.rst b/Documentation/userspace-api/media/v4l/dev-rds.rst index 207216d5e6a5..b1dadc24561f 100644 --- a/Documentation/userspace-api/media/v4l/dev-rds.rst +++ b/Documentation/userspace-api/media/v4l/dev-rds.rst @@ -91,8 +91,6 @@ RDS datastructures .. c:type:: v4l2_rds_data -.. tabularcolumns:: |p{2.5cm}|p{2.5cm}|p{12.5cm}| - .. flat-table:: struct v4l2_rds_data :header-rows: 0 :stub-columns: 0 @@ -133,7 +131,7 @@ RDS datastructures .. _v4l2-rds-block-codes: -.. tabularcolumns:: |p{6.4cm}|p{2.0cm}|p{1.2cm}|p{7.9cm}| +.. tabularcolumns:: |p{6.4cm}|p{2.0cm}|p{1.2cm}|p{7.0cm}| .. flat-table:: Block defines :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/dev-sdr.rst b/Documentation/userspace-api/media/v4l/dev-sdr.rst index 80b25a7e8017..928884dfe09d 100644 --- a/Documentation/userspace-api/media/v4l/dev-sdr.rst +++ b/Documentation/userspace-api/media/v4l/dev-sdr.rst @@ -80,7 +80,7 @@ data transfer, set by the driver in order to inform application. .. c:type:: v4l2_sdr_format -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_sdr_format :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst index f0df144c9f63..97ec2b115c71 100644 --- a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst +++ b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst @@ -108,7 +108,7 @@ struct v4l2_sliced_vbi_format \scriptsize \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{.85cm}|p{3.3cm}|p{4.4cm}|p{4.4cm}|p{4.4cm}| +.. tabularcolumns:: |p{.85cm}|p{3.3cm}|p{4.45cm}|p{4.45cm}|p{4.45cm}| .. cssclass:: longtable @@ -213,9 +213,9 @@ Sliced VBI services .. raw:: latex - \scriptsize + \footnotesize -.. tabularcolumns:: |p{4.1cm}|p{1.1cm}|p{2.4cm}|p{2.0cm}|p{7.3cm}| +.. tabularcolumns:: |p{4.2cm}|p{1.1cm}|p{2.1cm}|p{2.0cm}|p{6.5cm}| .. flat-table:: :header-rows: 1 @@ -253,13 +253,7 @@ Sliced VBI services :ref:`en300294` - PAL/SECAM line 23 - - - - :: - - Byte 0 1 - msb lsb msb lsb - Bit 7 6 5 4 3 2 1 0 x x 13 12 11 10 9 + - See :ref:`v4l2-sliced-wss-625-payload` below. * - ``V4L2_SLICED_VBI_525`` - 0x1000 - :cspan:`2` Set of services applicable to 525 line systems. @@ -282,6 +276,21 @@ format while i/o is in progress (between a :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` call, and after the first :c:func:`read()` or :c:func:`write()` call). +.. _v4l2-sliced-wss-625-payload: + +V4L2_SLICED_WSS_625 payload +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The payload for ``V4L2_SLICED_WSS_625`` is: + + +-----+------------------+-----------------------+ + |Byte | 0 | 1 | + +-----+--------+---------+-----------+-----------+ + | | msb | lsb | msb | lsb | + | +-+-+-+--+--+-+-+--+--+-+--+---+---+--+-+--+ + | Bit |7|6|5|4 | 3|2|1|0 | x|x|13|12 | 11|10|9|8 | + +-----+-+-+-+--+--+-+-+--+--+-+--+---+---+--+-+--+ + Reading and writing sliced VBI data =================================== @@ -298,7 +307,7 @@ struct :c:type:`v4l2_sliced_vbi_data` elements must be zero. struct v4l2_sliced_vbi_data --------------------------- -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{1.2cm}|p{2.2cm}|p{13.9cm}| .. flat-table:: :header-rows: 0 @@ -455,7 +464,7 @@ number). struct v4l2_mpeg_vbi_fmt_ivtv ----------------------------- -.. tabularcolumns:: |p{1.0cm}|p{3.8cm}|p{1.0cm}|p{11.2cm}| +.. tabularcolumns:: |p{4.2cm}|p{2.0cm}|p{11.1cm}| .. flat-table:: :header-rows: 0 @@ -490,7 +499,7 @@ struct v4l2_mpeg_vbi_fmt_ivtv Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field ------------------------------------------------------------- -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. flat-table:: :header-rows: 1 @@ -519,7 +528,11 @@ Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0 ------------------------------------------------- -.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}| +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{4.6cm}|p{2.0cm}|p{10.7cm}| .. flat-table:: :header-rows: 0 @@ -560,13 +573,16 @@ structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0 one line of unspecified data that should be ignored by applications. +.. raw:: latex + + \normalsize .. _v4l2-mpeg-vbi-itv0-1: struct v4l2_mpeg_vbi_ITV0 ------------------------- -.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}| +.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.7cm}| .. flat-table:: :header-rows: 0 @@ -587,7 +603,7 @@ struct v4l2_mpeg_vbi_ITV0 struct v4l2_mpeg_vbi_itv0_line ------------------------------ -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: :header-rows: 0 @@ -609,7 +625,7 @@ struct v4l2_mpeg_vbi_itv0_line Line Identifiers for struct v4l2_mpeg_vbi_itv0_line id field ------------------------------------------------------------ -.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}| +.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.5cm}| .. flat-table:: :header-rows: 1 diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst index 2aa8157efae1..fd1de0a73a9f 100644 --- a/Documentation/userspace-api/media/v4l/dev-subdev.rst +++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst @@ -209,9 +209,11 @@ list entity names and pad numbers). .. raw:: latex + \begingroup \scriptsize + \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{2.0cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}| +.. tabularcolumns:: |p{2.0cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}| .. _sample-pipeline-config: @@ -298,7 +300,7 @@ list entity names and pad numbers). .. raw:: latex - \normalsize + \endgroup 1. Initial state. The sensor source pad format is set to its native 3MP size and V4L2_MBUS_FMT_SGRBG8_1X8 media bus code. Formats on the diff --git a/Documentation/userspace-api/media/v4l/diff-v4l.rst b/Documentation/userspace-api/media/v4l/diff-v4l.rst index caa05fbbd396..33243ecb5033 100644 --- a/Documentation/userspace-api/media/v4l/diff-v4l.rst +++ b/Documentation/userspace-api/media/v4l/diff-v4l.rst @@ -72,7 +72,11 @@ and radio devices supporting a set of related functions like video capturing, video overlay and VBI capturing. See :ref:`open` for an introduction. -.. tabularcolumns:: |p{5.5cm}|p{6.5cm}|p{5.5cm} +.. raw:: latex + + \small + +.. tabularcolumns:: |p{5.3cm}|p{6.7cm}|p{5.3cm}| .. cssclass:: longtable @@ -148,6 +152,10 @@ introduction. - ``-`` - See above. +.. raw:: latex + + \normalsize + The ``audios`` field was replaced by ``capabilities`` flag ``V4L2_CAP_AUDIO``, indicating *if* the device has any audio inputs or outputs. To determine their number applications can enumerate audio diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst index c05a2d2c675d..4c5061aa9cd4 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst @@ -32,6 +32,7 @@ enum v4l2_exposure_auto_type - should ignore such requests. Possible values are: +.. tabularcolumns:: |p{7.1cm}|p{10.4cm}| .. flat-table:: :header-rows: 0 @@ -81,7 +82,7 @@ enum v4l2_exposure_metering - Determines how the camera measures the amount of light available for the frame exposure. Possible values are: -.. tabularcolumns:: |p{8.7cm}|p{8.8cm}| +.. tabularcolumns:: |p{8.7cm}|p{8.7cm}| .. flat-table:: :header-rows: 0 @@ -173,7 +174,7 @@ enum v4l2_exposure_metering - control may stop updates of the ``V4L2_CID_AUTO_FOCUS_STATUS`` control value. -.. tabularcolumns:: |p{6.7cm}|p{10.8cm}| +.. tabularcolumns:: |p{6.8cm}|p{10.7cm}| .. flat-table:: :header-rows: 0 @@ -199,7 +200,7 @@ enum v4l2_exposure_metering - enum v4l2_auto_focus_range - Determines auto focus distance range for which lens may be adjusted. -.. tabularcolumns:: |p{6.8cm}|p{10.7cm}| +.. tabularcolumns:: |p{6.9cm}|p{10.6cm}| .. flat-table:: :header-rows: 0 @@ -274,7 +275,7 @@ enum v4l2_auto_n_preset_white_balance - representation. The following white balance presets are listed in order of increasing color temperature. -.. tabularcolumns:: |p{7.2 cm}|p{10.3cm}| +.. tabularcolumns:: |p{7.4cm}|p{10.1cm}| .. flat-table:: :header-rows: 0 @@ -384,7 +385,9 @@ enum v4l2_scene_mode - \small -.. tabularcolumns:: |p{5.9cm}|p{11.5cm}| +.. tabularcolumns:: |p{5.9cm}|p{11.6cm}| + +.. cssclass:: longtable .. flat-table:: :header-rows: 0 @@ -519,6 +522,7 @@ enum v4l2_scene_mode - have the ``V4L2_CAMERA_ORIENTATION_EXTERNAL`` orientation. +.. tabularcolumns:: |p{7.7cm}|p{9.8cm}| .. flat-table:: :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst index 01e3b1a3fb99..3fc04daa9ffb 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst @@ -34,7 +34,11 @@ Stateless Codec Control ID .. c:type:: v4l2_ctrl_h264_sps -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}| .. flat-table:: struct v4l2_ctrl_h264_sps :header-rows: 0 @@ -96,6 +100,10 @@ Stateless Codec Control ID - ``flags`` - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>` +.. raw:: latex + + \normalsize + .. _h264_sps_constraints_set_flags: ``Sequence Parameter Set Constraints Set Flags`` @@ -171,7 +179,9 @@ Stateless Codec Control ID .. c:type:: v4l2_ctrl_h264_pps -.. cssclass:: longtable +.. raw:: latex + + \small .. flat-table:: struct v4l2_ctrl_h264_pps :header-rows: 0 @@ -212,43 +222,57 @@ Stateless Codec Control ID - ``flags`` - See :ref:`Picture Parameter Set Flags <h264_pps_flags>` +.. raw:: latex + + \normalsize + .. _h264_pps_flags: ``Picture Parameter Set Flags`` -.. cssclass:: longtable +.. raw:: latex + + \begingroup + \scriptsize + \setlength{\tabcolsep}{2pt} + +.. tabularcolumns:: |p{9.8cm}|p{1.0cm}|p{6.5cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - :widths: 1 1 2 + :widths: 10 1 4 * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE`` - - 0x00000001 + - 0x0001 - * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT`` - - 0x00000002 + - 0x0002 - * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED`` - - 0x00000004 + - 0x0004 - * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT`` - - 0x00000008 + - 0x0008 - * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED`` - - 0x00000010 + - 0x0010 - * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT`` - - 0x00000020 + - 0x0020 - * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE`` - - 0x00000040 + - 0x0040 - * - ``V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT`` - - 0x00000080 - - Indicates that ``V4L2_CID_STATELESS_H264_SCALING_MATRIX`` + - 0x0080 + - ``V4L2_CID_STATELESS_H264_SCALING_MATRIX`` must be used for this picture. +.. raw:: latex + + \endgroup + ``V4L2_CID_STATELESS_H264_SCALING_MATRIX (struct)`` Specifies the scaling matrix (as extracted from the bitstream) for the associated H264 slice data. The bitstream parameters are @@ -259,7 +283,11 @@ Stateless Codec Control ID .. c:type:: v4l2_ctrl_h264_scaling_matrix -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{0.6cm}|p{4.8cm}|p{11.9cm}| .. flat-table:: struct v4l2_ctrl_h264_scaling_matrix :header-rows: 0 @@ -290,7 +318,11 @@ Stateless Codec Control ID .. c:type:: v4l2_ctrl_h264_slice_params -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{4.0cm}|p{5.9cm}|p{7.4cm}| .. flat-table:: struct v4l2_ctrl_h264_slice_params :header-rows: 0 @@ -333,11 +365,11 @@ Stateless Codec Control ID * - __u8 - ``num_ref_idx_l0_active_minus1`` - If num_ref_idx_active_override_flag is not set, this field must be - set to the value of num_ref_idx_l0_default_active_minus1. + set to the value of num_ref_idx_l0_default_active_minus1 * - __u8 - ``num_ref_idx_l1_active_minus1`` - If num_ref_idx_active_override_flag is not set, this field must be - set to the value of num_ref_idx_l1_default_active_minus1. + set to the value of num_ref_idx_l1_default_active_minus1 * - __u8 - ``reserved`` - Applications and drivers must set this to zero. @@ -351,6 +383,10 @@ Stateless Codec Control ID - ``flags`` - See :ref:`Slice Parameter Flags <h264_slice_flags>` +.. raw:: latex + + \normalsize + .. _h264_slice_flags: ``Slice Parameter Set Flags`` @@ -378,7 +414,11 @@ Stateless Codec Control ID .. c:type:: v4l2_ctrl_h264_pred_weights -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{4.9cm}|p{4.9cm}|p{7.5cm}| .. flat-table:: struct v4l2_ctrl_h264_pred_weights :header-rows: 0 @@ -396,9 +436,17 @@ Stateless Codec Control ID - The weight factors at index 0 are the weight factors for the reference list 0, the one at index 1 for the reference list 1. +.. raw:: latex + + \normalsize + .. c:type:: v4l2_h264_weight_factors -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.0cm}|p{4.5cm}|p{11.8cm}| .. flat-table:: struct v4l2_h264_weight_factors :header-rows: 0 @@ -418,6 +466,10 @@ Stateless Codec Control ID - ``chroma_offset[32][2]`` - +.. raw:: latex + + \normalsize + ``Picture Reference`` .. c:type:: v4l2_h264_reference @@ -440,7 +492,11 @@ Stateless Codec Control ID ``Reference Fields`` -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{5.4cm}|p{0.8cm}|p{11.1cm}| .. flat-table:: :header-rows: 0 @@ -458,6 +514,10 @@ Stateless Codec Control ID - The frame (or the top/bottom fields, if it's a field pair) is used for short-term reference. +.. raw:: latex + + \normalsize + ``V4L2_CID_STATELESS_H264_DECODE_PARAMS (struct)`` Specifies the decode parameters (as extracted from the bitstream) for the associated H264 slice data. This includes the necessary @@ -469,7 +529,11 @@ Stateless Codec Control ID .. c:type:: v4l2_ctrl_h264_decode_params -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{4.0cm}|p{5.9cm}|p{7.4cm}| .. flat-table:: struct v4l2_ctrl_h264_decode_params :header-rows: 0 @@ -524,11 +588,19 @@ Stateless Codec Control ID - ``flags`` - See :ref:`Decode Parameters Flags <h264_decode_params_flags>` +.. raw:: latex + + \normalsize + .. _h264_decode_params_flags: ``Decode Parameters Flags`` -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{8.3cm}|p{2.1cm}|p{6.9cm}| .. flat-table:: :header-rows: 0 @@ -545,9 +617,17 @@ Stateless Codec Control ID - 0x00000004 - +.. raw:: latex + + \normalsize + .. c:type:: v4l2_h264_dpb_entry -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.0cm}|p{4.9cm}|p{11.4cm}| .. flat-table:: struct v4l2_h264_dpb_entry :header-rows: 0 @@ -583,11 +663,19 @@ Stateless Codec Control ID - ``flags`` - See :ref:`DPB Entry Flags <h264_dpb_flags>` +.. raw:: latex + + \normalsize + .. _h264_dpb_flags: ``DPB Entries Flags`` -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{7.7cm}|p{2.1cm}|p{7.5cm}| .. flat-table:: :header-rows: 0 @@ -607,6 +695,10 @@ Stateless Codec Control ID - 0x00000008 - The DPB entry is a single field or a complementary field pair. +.. raw:: latex + + \normalsize + ``V4L2_CID_STATELESS_H264_DECODE_MODE (enum)`` Specifies the decoding mode to use. Currently exposes slice-based and frame-based decoding but new modes might be added later on. @@ -619,7 +711,11 @@ Stateless Codec Control ID .. c:type:: v4l2_stateless_h264_decode_mode -.. cssclass:: longtable +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| .. flat-table:: :header-rows: 0 @@ -644,6 +740,10 @@ Stateless Codec Control ID selected, the ``V4L2_CID_STATELESS_H264_SLICE_PARAMS`` control shall not be set. +.. raw:: latex + + \normalsize + ``V4L2_CID_STATELESS_H264_START_CODE (enum)`` Specifies the H264 slice start code expected for each slice. This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE @@ -655,23 +755,32 @@ Stateless Codec Control ID .. c:type:: v4l2_stateless_h264_start_code -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{7.9cm}|p{0.4cm}|p{9.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - :widths: 1 1 2 + :widths: 4 1 4 * - ``V4L2_STATELESS_H264_START_CODE_NONE`` - 0 - Selecting this value specifies that H264 slices are passed - to the driver without any start code. + to the driver without any start code. The bitstream data should be + according to :ref:`h264` 7.3.1 NAL unit syntax, hence contains + emulation prevention bytes when required. * - ``V4L2_STATELESS_H264_START_CODE_ANNEX_B`` - 1 - Selecting this value specifies that H264 slices are expected to be prefixed by Annex B start codes. According to :ref:`h264` valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. +.. raw:: latex + + \normalsize .. _codec-stateless-fwht: @@ -683,9 +792,11 @@ Stateless Codec Control ID .. c:type:: v4l2_ctrl_fwht_params -.. cssclass:: longtable +.. raw:: latex + + \small -.. tabularcolumns:: |p{1.4cm}|p{4.3cm}|p{11.8cm}| +.. tabularcolumns:: |p{1.4cm}|p{3.9cm}|p{12.0cm}| .. flat-table:: struct v4l2_ctrl_fwht_params :header-rows: 0 @@ -724,16 +835,20 @@ Stateless Codec Control ID - ``quantization`` - The quantization range, from enum :c:type:`v4l2_quantization`. +.. raw:: latex + \normalsize .. _fwht-flags: FWHT Flags ========== -.. cssclass:: longtable +.. raw:: latex -.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.3cm}| + \small + +.. tabularcolumns:: |p{7.0cm}|p{2.3cm}|p{8.0cm}| .. flat-table:: :header-rows: 0 @@ -778,7 +893,7 @@ FWHT Flags - Set if this is an I-frame. * - ``V4L2_FWHT_FL_COMPONENTS_NUM_MSK`` - 0x00070000 - - The number of color components - 1. + - The number of color components minus one. * - ``V4L2_FWHT_FL_PIXENC_MSK`` - 0x00180000 - The mask for the pixel encoding. @@ -791,3 +906,341 @@ FWHT Flags * - ``V4L2_FWHT_FL_PIXENC_HSV`` - 0x00180000 - Set if the pixel encoding is HSV. + +.. raw:: latex + + \normalsize + +.. _v4l2-codec-stateless-vp8: + +``V4L2_CID_STATELESS_VP8_FRAME (struct)`` + Specifies the frame parameters for the associated VP8 parsed frame data. + This includes the necessary parameters for + configuring a stateless hardware decoding pipeline for VP8. + The bitstream parameters are defined according to :ref:`vp8`. + +.. c:type:: v4l2_ctrl_vp8_frame + +.. raw:: latex + + \small + +.. tabularcolumns:: |p{7.0cm}|p{4.6cm}|p{5.7cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_vp8_frame + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - struct :c:type:`v4l2_vp8_segment` + - ``segment`` + - Structure with segment-based adjustments metadata. + * - struct :c:type:`v4l2_vp8_loop_filter` + - ``lf`` + - Structure with loop filter level adjustments metadata. + * - struct :c:type:`v4l2_vp8_quantization` + - ``quant`` + - Structure with VP8 dequantization indices metadata. + * - struct :c:type:`v4l2_vp8_entropy` + - ``entropy`` + - Structure with VP8 entropy coder probabilities metadata. + * - struct :c:type:`v4l2_vp8_entropy_coder_state` + - ``coder_state`` + - Structure with VP8 entropy coder state. + * - __u16 + - ``width`` + - The width of the frame. Must be set for all frames. + * - __u16 + - ``height`` + - The height of the frame. Must be set for all frames. + * - __u8 + - ``horizontal_scale`` + - Horizontal scaling factor. + * - __u8 + - ``vertical_scaling factor`` + - Vertical scale. + * - __u8 + - ``version`` + - Bitstream version. + * - __u8 + - ``prob_skip_false`` + - Indicates the probability that the macroblock is not skipped. + * - __u8 + - ``prob_intra`` + - Indicates the probability that a macroblock is intra-predicted. + * - __u8 + - ``prob_last`` + - Indicates the probability that the last reference frame is used + for inter-prediction + * - __u8 + - ``prob_gf`` + - Indicates the probability that the golden reference frame is used + for inter-prediction + * - __u8 + - ``num_dct_parts`` + - Number of DCT coefficients partitions. Must be one of: 1, 2, 4, or 8. + * - __u32 + - ``first_part_size`` + - Size of the first partition, i.e. the control partition. + * - __u32 + - ``first_part_header_bits`` + - Size in bits of the first partition header portion. + * - __u32 + - ``dct_part_sizes[8]`` + - DCT coefficients sizes. + * - __u64 + - ``last_frame_ts`` + - Timestamp for the V4L2 capture buffer to use as last reference frame, used + with inter-coded frames. The timestamp refers to the ``timestamp`` field in + struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` + function to convert the struct :c:type:`timeval` in struct + :c:type:`v4l2_buffer` to a __u64. + * - __u64 + - ``golden_frame_ts`` + - Timestamp for the V4L2 capture buffer to use as last reference frame, used + with inter-coded frames. The timestamp refers to the ``timestamp`` field in + struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` + function to convert the struct :c:type:`timeval` in struct + :c:type:`v4l2_buffer` to a __u64. + * - __u64 + - ``alt_frame_ts`` + - Timestamp for the V4L2 capture buffer to use as alternate reference frame, used + with inter-coded frames. The timestamp refers to the ``timestamp`` field in + struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` + function to convert the struct :c:type:`timeval` in struct + :c:type:`v4l2_buffer` to a __u64. + * - __u64 + - ``flags`` + - See :ref:`Frame Flags <vp8_frame_flags>` + +.. raw:: latex + + \normalsize + +.. _vp8_frame_flags: + +``Frame Flags`` + +.. tabularcolumns:: |p{9.8cm}|p{0.8cm}|p{6.7cm}| + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_VP8_FRAME_FLAG_KEY_FRAME`` + - 0x01 + - Indicates if the frame is a key frame. + * - ``V4L2_VP8_FRAME_FLAG_EXPERIMENTAL`` + - 0x02 + - Experimental bitstream. + * - ``V4L2_VP8_FRAME_FLAG_SHOW_FRAME`` + - 0x04 + - Show frame flag, indicates if the frame is for display. + * - ``V4L2_VP8_FRAME_FLAG_MB_NO_SKIP_COEFF`` + - 0x08 + - Enable/disable skipping of macroblocks with no non-zero coefficients. + * - ``V4L2_VP8_FRAME_FLAG_SIGN_BIAS_GOLDEN`` + - 0x10 + - Sign of motion vectors when the golden frame is referenced. + * - ``V4L2_VP8_FRAME_FLAG_SIGN_BIAS_ALT`` + - 0x20 + - Sign of motion vectors when the alt frame is referenced. + +.. c:type:: v4l2_vp8_entropy_coder_state + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.3cm}| + +.. flat-table:: struct v4l2_vp8_entropy_coder_state + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``range`` + - coder state value for "Range" + * - __u8 + - ``value`` + - coder state value for "Value"- + * - __u8 + - ``bit_count`` + - number of bits left. + * - __u8 + - ``padding`` + - Applications and drivers must set this to zero. + +.. c:type:: v4l2_vp8_segment + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.2cm}|p{4.0cm}|p{12.1cm}| + +.. flat-table:: struct v4l2_vp8_segment + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __s8 + - ``quant_update[4]`` + - Signed quantizer value update. + * - __s8 + - ``lf_update[4]`` + - Signed loop filter level value update. + * - __u8 + - ``segment_probs[3]`` + - Segment probabilities. + * - __u8 + - ``padding`` + - Applications and drivers must set this to zero. + * - __u32 + - ``flags`` + - See :ref:`Segment Flags <vp8_segment_flags>` + +.. _vp8_segment_flags: + +``Segment Flags`` + +.. raw:: latex + + \small + +.. tabularcolumns:: |p{10cm}|p{1.0cm}|p{6.3cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_VP8_SEGMENT_FLAG_ENABLED`` + - 0x01 + - Enable/disable segment-based adjustments. + * - ``V4L2_VP8_SEGMENT_FLAG_UPDATE_MAP`` + - 0x02 + - Indicates if the macroblock segmentation map is updated in this frame. + * - ``V4L2_VP8_SEGMENT_FLAG_UPDATE_FEATURE_DATA`` + - 0x04 + - Indicates if the segment feature data is updated in this frame. + * - ``V4L2_VP8_SEGMENT_FLAG_DELTA_VALUE_MODE`` + - 0x08 + - If is set, the segment feature data mode is delta-value. + If cleared, it's absolute-value. + +.. raw:: latex + + \normalsize + +.. c:type:: v4l2_vp8_loop_filter + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{3.9cm}|p{11.9cm}| + +.. flat-table:: struct v4l2_vp8_loop_filter + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __s8 + - ``ref_frm_delta[4]`` + - Reference adjustment (signed) delta value. + * - __s8 + - ``mb_mode_delta[4]`` + - Macroblock prediction mode adjustment (signed) delta value. + * - __u8 + - ``sharpness_level`` + - Sharpness level + * - __u8 + - ``level`` + - Filter level + * - __u16 + - ``padding`` + - Applications and drivers must set this to zero. + * - __u32 + - ``flags`` + - See :ref:`Loop Filter Flags <vp8_loop_filter_flags>` + +.. _vp8_loop_filter_flags: + +``Loop Filter Flags`` + +.. tabularcolumns:: |p{7.0cm}|p{1.2cm}|p{9.1cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_VP8_LF_ADJ_ENABLE`` + - 0x01 + - Enable/disable macroblock-level loop filter adjustment. + * - ``V4L2_VP8_LF_DELTA_UPDATE`` + - 0x02 + - Indicates if the delta values used in an adjustment are updated. + * - ``V4L2_VP8_LF_FILTER_TYPE_SIMPLE`` + - 0x04 + - If set, indicates the filter type is simple. + If cleared, the filter type is normal. + +.. c:type:: v4l2_vp8_quantization + +.. tabularcolumns:: |p{1.5cm}|p{3.5cm}|p{12.3cm}| + +.. flat-table:: struct v4l2_vp8_quantization + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``y_ac_qi`` + - Luma AC coefficient table index. + * - __s8 + - ``y_dc_delta`` + - Luma DC delta vaue. + * - __s8 + - ``y2_dc_delta`` + - Y2 block DC delta value. + * - __s8 + - ``y2_ac_delta`` + - Y2 block AC delta value. + * - __s8 + - ``uv_dc_delta`` + - Chroma DC delta value. + * - __s8 + - ``uv_ac_delta`` + - Chroma AC delta value. + * - __u16 + - ``padding`` + - Applications and drivers must set this to zero. + +.. c:type:: v4l2_vp8_entropy + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_vp8_entropy + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``coeff_probs[4][8][3][11]`` + - Coefficient update probabilities. + * - __u8 + - ``y_mode_probs[4]`` + - Luma mode update probabilities. + * - __u8 + - ``uv_mode_probs[3]`` + - Chroma mode update probabilities. + * - __u8 + - ``mv_probs[2][19]`` + - MV decoding update probabilities. + * - __u8 + - ``padding[3]`` + - Applications and drivers must set this to zero. diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index 00944e97d638..b0de4e6e7ebd 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -392,7 +392,7 @@ enum v4l2_mpeg_audio_mode_extension - which subbands are in intensity stereo. All other subbands are coded in stereo. Layer III is not (yet) supported. Possible values are: - +.. tabularcolumns:: |p{9.1cm}|p{8.4cm}| .. flat-table:: :header-rows: 0 @@ -580,7 +580,7 @@ enum v4l2_mpeg_video_bitrate_mode - ``V4L2_CID_MPEG_VIDEO_BITRATE (integer)`` - Video bitrate in bits per second. + Average video bitrate in bits per second. ``V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (integer)`` Peak video bitrate in bits per second. Must be larger or equal to @@ -605,7 +605,7 @@ enum v4l2_mpeg_video_frame_skip_mode - are: -.. tabularcolumns:: |p{9.2cm}|p{8.3cm}| +.. tabularcolumns:: |p{8.2cm}|p{9.3cm}| .. raw:: latex @@ -615,12 +615,12 @@ enum v4l2_mpeg_video_frame_skip_mode - :header-rows: 0 :stub-columns: 0 - * - ``V4L2_MPEG_FRAME_SKIP_MODE_DISABLED`` + * - ``V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_DISABLED`` - Frame skip mode is disabled. - * - ``V4L2_MPEG_FRAME_SKIP_MODE_LEVEL_LIMIT`` + * - ``V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT`` - Frame skip mode enabled and buffer limit is set by the chosen level and is defined by the standard. - * - ``V4L2_MPEG_FRAME_SKIP_MODE_BUF_LIMIT`` + * - ``V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT`` - Frame skip mode enabled and buffer limit is set by the :ref:`VBV (MPEG1/2/4) <v4l2-mpeg-video-vbv-size>` or :ref:`CPB (H264) buffer size <v4l2-mpeg-video-h264-cpb-size>` control. @@ -674,11 +674,64 @@ enum v4l2_mpeg_video_frame_skip_mode - is currently displayed (decoded). This value is reset to 0 whenever the decoder is started. +``V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (integer64)`` + This control sets the conceal color in YUV color space. It describes + the client preference of the error conceal color in case of an error + where the reference frame is missing. The decoder should fill the + reference buffer with the preferred color and use it for future + decoding. The control is using 16 bits per channel. + Applicable to decoders. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - + - 8bit format + - 10bit format + - 12bit format + * - Y luminance + - Bit 0:7 + - Bit 0:9 + - Bit 0:11 + * - Cb chrominance + - Bit 16:23 + - Bit 16:25 + - Bit 16:27 + * - Cr chrominance + - Bit 32:39 + - Bit 32:41 + - Bit 32:43 + * - Must be zero + - Bit 48:63 + - Bit 48:63 + - Bit 48:63 + ``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)`` If enabled the decoder expects to receive a single slice per buffer, otherwise the decoder expects a single frame in per buffer. Applicable to the decoder, all codecs. +``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (boolean)`` + If the display delay is enabled then the decoder is forced to return + a CAPTURE buffer (decoded frame) after processing a certain number + of OUTPUT buffers. The delay can be set through + ``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY``. This + feature can be used for example for generating thumbnails of videos. + Applicable to the decoder. + +``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (integer)`` + Display delay value for decoder. The decoder is forced to + return a decoded frame after the set 'display delay' number of + frames. If this number is low it may result in frames returned out + of display order, in addition the hardware may still be using the + returned buffer as a reference picture for subsequent frames. + +``V4L2_CID_MPEG_VIDEO_AU_DELIMITER (boolean)`` + If enabled then, AUD (Access Unit Delimiter) NALUs will be generated. + That could be useful to find the start of a frame without having to + fully parse each NALU. Applicable to the H264 and HEVC encoders. + ``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)`` Enable writing sample aspect ratio in the Video Usability Information. Applicable to the H264 encoder. @@ -873,7 +926,11 @@ enum v4l2_mpeg_video_h264_profile - The profile information for H264. Applicable to the H264 encoder. Possible values are: +.. raw:: latex + + \small +.. tabularcolumns:: |p{10.2cm}|p{7.3cm}| .. flat-table:: :header-rows: 0 @@ -916,7 +973,9 @@ enum v4l2_mpeg_video_h264_profile - * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH`` - Constrained High profile +.. raw:: latex + \normalsize .. _v4l2-mpeg-video-mpeg2-profile: @@ -927,7 +986,11 @@ enum v4l2_mpeg_video_mpeg2_profile - The profile information for MPEG2. Applicable to MPEG2 codecs. Possible values are: +.. raw:: latex + \small + +.. tabularcolumns:: |p{10.2cm}|p{7.3cm}| .. flat-table:: :header-rows: 0 @@ -947,6 +1010,9 @@ enum v4l2_mpeg_video_mpeg2_profile - - Multi-view profile (MVP) +.. raw:: latex + + \normalsize .. _v4l2-mpeg-video-mpeg4-profile: @@ -957,7 +1023,11 @@ enum v4l2_mpeg_video_mpeg4_profile - The profile information for MPEG4. Applicable to the MPEG4 encoder. Possible values are: +.. raw:: latex + + \small +.. tabularcolumns:: |p{11.8cm}|p{5.7cm}| .. flat-table:: :header-rows: 0 @@ -972,9 +1042,11 @@ enum v4l2_mpeg_video_mpeg4_profile - * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE`` - Simple Scalable profile * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY`` - - + - Advanced Coding Efficiency profile +.. raw:: latex + \normalsize ``V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (integer)`` The maximum number of reference pictures used for encoding. @@ -1030,7 +1102,7 @@ enum v4l2_mpeg_video_h264_loop_filter_mode - \small -.. tabularcolumns:: |p{13.6cm}|p{3.9cm}| +.. tabularcolumns:: |p{13.5cm}|p{4.0cm}| .. flat-table:: :header-rows: 0 @@ -1425,7 +1497,7 @@ enum v4l2_mpeg_video_h264_fmo_change_dir - Specifies a direction of the slice group change for raster and wipe maps. Applicable to the H264 encoder. Possible values are: - +.. tabularcolumns:: |p{9.6cm}|p{7.9cm}| .. flat-table:: :header-rows: 0 @@ -1549,9 +1621,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - .. c:type:: v4l2_ctrl_mpeg2_slice_params -.. cssclass:: longtable +.. tabularcolumns:: |p{5.6cm}|p{4.6cm}|p{7.1cm}| -.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| +.. cssclass:: longtable .. flat-table:: struct v4l2_ctrl_mpeg2_slice_params :header-rows: 0 @@ -1594,7 +1666,7 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - .. cssclass:: longtable -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| +.. tabularcolumns:: |p{1.4cm}|p{6.5cm}|p{9.4cm}| .. flat-table:: struct v4l2_mpeg2_sequence :header-rows: 0 @@ -1625,9 +1697,13 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - .. c:type:: v4l2_mpeg2_picture +.. raw:: latex + + \small + .. cssclass:: longtable -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| +.. tabularcolumns:: |p{1.0cm}|p{5.6cm}|p{10.7cm}| .. flat-table:: struct v4l2_mpeg2_picture :header-rows: 0 @@ -1675,6 +1751,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - - ``progressive_frame`` - Indicates whether the current frame is progressive. +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION (struct)`` Specifies quantization matrices (as extracted from the bitstream) for the associated MPEG-2 slice data. @@ -1686,9 +1766,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - .. c:type:: v4l2_ctrl_mpeg2_quantization -.. cssclass:: longtable +.. tabularcolumns:: |p{0.8cm}|p{8.0cm}|p{8.5cm}| -.. tabularcolumns:: |p{1.2cm}|p{8.0cm}|p{7.4cm}| +.. cssclass:: longtable .. raw:: latex @@ -1739,6 +1819,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - non-intra-coded frames, in zigzag scanning order. Only relevant for non-4:2:0 YUV formats. +.. raw:: latex + + \normalsize + ``V4L2_CID_FWHT_I_FRAME_QP (integer)`` Quantization parameter for an I frame for FWHT. Valid range: from 1 to 31. @@ -1747,329 +1831,6 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - Quantization parameter for a P frame for FWHT. Valid range: from 1 to 31. -.. _v4l2-mpeg-vp8: - -``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (struct)`` - Specifies the frame parameters for the associated VP8 parsed frame data. - This includes the necessary parameters for - configuring a stateless hardware decoding pipeline for VP8. - The bitstream parameters are defined according to :ref:`vp8`. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_vp8_frame_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| - -.. flat-table:: struct v4l2_ctrl_vp8_frame_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - struct :c:type:`v4l2_vp8_segment_header` - - ``segment_header`` - - Structure with segment-based adjustments metadata. - * - struct :c:type:`v4l2_vp8_loopfilter_header` - - ``loopfilter_header`` - - Structure with loop filter level adjustments metadata. - * - struct :c:type:`v4l2_vp8_quantization_header` - - ``quant_header`` - - Structure with VP8 dequantization indices metadata. - * - struct :c:type:`v4l2_vp8_entropy_header` - - ``entropy_header`` - - Structure with VP8 entropy coder probabilities metadata. - * - struct :c:type:`v4l2_vp8_entropy_coder_state` - - ``coder_state`` - - Structure with VP8 entropy coder state. - * - __u16 - - ``width`` - - The width of the frame. Must be set for all frames. - * - __u16 - - ``height`` - - The height of the frame. Must be set for all frames. - * - __u8 - - ``horizontal_scale`` - - Horizontal scaling factor. - * - __u8 - - ``vertical_scaling factor`` - - Vertical scale. - * - __u8 - - ``version`` - - Bitstream version. - * - __u8 - - ``prob_skip_false`` - - Indicates the probability that the macroblock is not skipped. - * - __u8 - - ``prob_intra`` - - Indicates the probability that a macroblock is intra-predicted. - * - __u8 - - ``prob_last`` - - Indicates the probability that the last reference frame is used - for inter-prediction - * - __u8 - - ``prob_gf`` - - Indicates the probability that the golden reference frame is used - for inter-prediction - * - __u8 - - ``num_dct_parts`` - - Number of DCT coefficients partitions. Must be one of: 1, 2, 4, or 8. - * - __u32 - - ``first_part_size`` - - Size of the first partition, i.e. the control partition. - * - __u32 - - ``first_part_header_bits`` - - Size in bits of the first partition header portion. - * - __u32 - - ``dct_part_sizes[8]`` - - DCT coefficients sizes. - * - __u64 - - ``last_frame_ts`` - - Timestamp for the V4L2 capture buffer to use as last reference frame, used - with inter-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``golden_frame_ts`` - - Timestamp for the V4L2 capture buffer to use as last reference frame, used - with inter-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``alt_frame_ts`` - - Timestamp for the V4L2 capture buffer to use as alternate reference frame, used - with inter-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``flags`` - - See :ref:`Frame Header Flags <vp8_frame_header_flags>` - -.. _vp8_frame_header_flags: - -``Frame Header Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME`` - - 0x01 - - Indicates if the frame is a key frame. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL`` - - 0x02 - - Experimental bitstream. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME`` - - 0x04 - - Show frame flag, indicates if the frame is for display. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF`` - - 0x08 - - Enable/disable skipping of macroblocks with no non-zero coefficients. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN`` - - 0x10 - - Sign of motion vectors when the golden frame is referenced. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT`` - - 0x20 - - Sign of motion vectors when the alt frame is referenced. - -.. c:type:: v4l2_vp8_entropy_coder_state - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_entropy_coder_state - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``range`` - - - * - __u8 - - ``value`` - - - * - __u8 - - ``bit_count`` - - - * - __u8 - - ``padding`` - - Applications and drivers must set this to zero. - -.. c:type:: v4l2_vp8_segment_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_segment_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s8 - - ``quant_update[4]`` - - Signed quantizer value update. - * - __s8 - - ``lf_update[4]`` - - Signed loop filter level value update. - * - __u8 - - ``segment_probs[3]`` - - Segment probabilities. - * - __u8 - - ``padding`` - - Applications and drivers must set this to zero. - * - __u32 - - ``flags`` - - See :ref:`Segment Header Flags <vp8_segment_header_flags>` - -.. _vp8_segment_header_flags: - -``Segment Header Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED`` - - 0x01 - - Enable/disable segment-based adjustments. - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP`` - - 0x02 - - Indicates if the macroblock segmentation map is updated in this frame. - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA`` - - 0x04 - - Indicates if the segment feature data is updated in this frame. - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE`` - - 0x08 - - If is set, the segment feature data mode is delta-value. - If cleared, it's absolute-value. - -.. c:type:: v4l2_vp8_loopfilter_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_loopfilter_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s8 - - ``ref_frm_delta[4]`` - - Reference adjustment (signed) delta value. - * - __s8 - - ``mb_mode_delta[4]`` - - Macroblock prediction mode adjustment (signed) delta value. - * - __u8 - - ``sharpness_level`` - - Sharpness level - * - __u8 - - ``level`` - - Filter level - * - __u16 - - ``padding`` - - Applications and drivers must set this to zero. - * - __u32 - - ``flags`` - - See :ref:`Loopfilter Header Flags <vp8_loopfilter_header_flags>` - -.. _vp8_loopfilter_header_flags: - -``Loopfilter Header Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_VP8_LF_HEADER_ADJ_ENABLE`` - - 0x01 - - Enable/disable macroblock-level loop filter adjustment. - * - ``V4L2_VP8_LF_HEADER_DELTA_UPDATE`` - - 0x02 - - Indicates if the delta values used in an adjustment are updated. - * - ``V4L2_VP8_LF_FILTER_TYPE_SIMPLE`` - - 0x04 - - If set, indicates the filter type is simple. - If cleared, the filter type is normal. - -.. c:type:: v4l2_vp8_quantization_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_quantization_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``y_ac_qi`` - - Luma AC coefficient table index. - * - __s8 - - ``y_dc_delta`` - - Luma DC delta vaue. - * - __s8 - - ``y2_dc_delta`` - - Y2 block DC delta value. - * - __s8 - - ``y2_ac_delta`` - - Y2 block AC delta value. - * - __s8 - - ``uv_dc_delta`` - - Chroma DC delta value. - * - __s8 - - ``uv_ac_delta`` - - Chroma AC delta value. - * - __u16 - - ``padding`` - - Applications and drivers must set this to zero. - -.. c:type:: v4l2_vp8_entropy_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_entropy_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``coeff_probs[4][8][3][11]`` - - Coefficient update probabilities. - * - __u8 - - ``y_mode_probs[4]`` - - Luma mode update probabilities. - * - __u8 - - ``uv_mode_probs[3]`` - - Chroma mode update probabilities. - * - __u8 - - ``mv_probs[2][19]`` - - MV decoding update probabilities. - * - __u8 - - ``padding[3]`` - - Applications and drivers must set this to zero. - .. raw:: latex \normalsize @@ -2096,6 +1857,11 @@ MFC 5.1 Control IDs feature can be used for example for generating thumbnails of videos. Applicable to the H264 decoder. + .. note:: + + This control is deprecated. Use the standard + ``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE`` control instead. + ``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (integer)`` Display delay value for H264 decoder. The decoder is forced to return a decoded frame after the set 'display delay' number of @@ -2103,6 +1869,11 @@ MFC 5.1 Control IDs of display order, in addition the hardware may still be using the returned buffer as a reference picture for subsequent frames. + .. note:: + + This control is deprecated. Use the standard + ``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY`` control instead. + ``V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (integer)`` The number of reference pictures used for encoding a P picture. Applicable to the H264 encoder. @@ -2187,7 +1958,7 @@ enum v4l2_mpeg_mfc51_video_frame_skip_mode - are: -.. tabularcolumns:: |p{9.2cm}|p{8.3cm}| +.. tabularcolumns:: |p{9.4cm}|p{8.1cm}| .. raw:: latex @@ -2197,12 +1968,12 @@ enum v4l2_mpeg_mfc51_video_frame_skip_mode - :header-rows: 0 :stub-columns: 0 - * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED`` + * - ``V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED`` - Frame skip mode is disabled. - * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT`` + * - ``V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT`` - Frame skip mode enabled and buffer limit is set by the chosen level and is defined by the standard. - * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT`` + * - ``V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT`` - Frame skip mode enabled and buffer limit is set by the VBV (MPEG1/2/4) or CPB (H264) buffer size control. @@ -2231,7 +2002,7 @@ enum v4l2_mpeg_mfc51_video_force_frame_type - Force a frame type for the next queued buffer. Applicable to encoders. Possible values are: -.. tabularcolumns:: |p{9.5cm}|p{8.0cm}| +.. tabularcolumns:: |p{9.9cm}|p{7.6cm}| .. flat-table:: :header-rows: 0 @@ -2267,6 +2038,7 @@ enum v4l2_mpeg_cx2341x_video_spatial_filter_mode - are: +.. tabularcolumns:: |p{11.5cm}|p{6.0cm}| .. flat-table:: :header-rows: 0 @@ -2292,11 +2064,11 @@ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type - Select the algorithm to use for the Luma Spatial Filter (default ``1D_HOR``). Possible values: -.. tabularcolumns:: |p{14.5cm}|p{3.0cm}| +.. tabularcolumns:: |p{13.1cm}|p{4.4cm}| .. raw:: latex - \small + \footnotesize .. flat-table:: :header-rows: 0 @@ -2317,8 +2089,6 @@ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type - \normalsize - - .. _chroma-spatial-filter-type: ``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE`` @@ -2328,8 +2098,11 @@ enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type - Select the algorithm for the Chroma Spatial Filter (default ``1D_HOR``). Possible values are: +.. raw:: latex -.. tabularcolumns:: |p{14.0cm}|p{3.5cm}| + \footnotesize + +.. tabularcolumns:: |p{11.0cm}|p{6.5cm}| .. flat-table:: :header-rows: 0 @@ -2340,7 +2113,9 @@ enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type - * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR`` - One-dimensional horizontal +.. raw:: latex + \normalsize .. _v4l2-mpeg-cx2341x-video-temporal-filter-mode: @@ -2351,7 +2126,9 @@ enum v4l2_mpeg_cx2341x_video_temporal_filter_mode - Sets the Temporal Filter mode (default ``MANUAL``). Possible values are: +.. raw:: latex + \footnotesize .. flat-table:: :header-rows: 0 @@ -2362,7 +2139,9 @@ enum v4l2_mpeg_cx2341x_video_temporal_filter_mode - * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO`` - Choose the filter automatically +.. raw:: latex + \normalsize ``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (integer (0-31))`` The setting for the Temporal Filter. 0 = off, 31 = maximum. (Default @@ -2377,6 +2156,11 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type - Median Filter Type (default ``OFF``). Possible values are: +.. raw:: latex + + \small + +.. tabularcolumns:: |p{11.0cm}|p{6.5cm}| .. flat-table:: :header-rows: 0 @@ -2393,7 +2177,9 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type - * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG`` - Diagonal filter +.. raw:: latex + \normalsize ``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (integer (0-255))`` Threshold above which the luminance median filter is enabled @@ -2470,7 +2256,7 @@ enum v4l2_vp8_num_ref_frames - The number of reference pictures for encoding P frames. Possible values are: -.. tabularcolumns:: |p{7.9cm}|p{9.6cm}| +.. tabularcolumns:: |p{7.5cm}|p{7.5cm}| .. raw:: latex @@ -2525,7 +2311,7 @@ enum v4l2_vp8_golden_frame_sel - \scriptsize -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{8.6cm}|p{8.9cm}| .. flat-table:: :header-rows: 0 @@ -2735,7 +2521,7 @@ enum v4l2_mpeg_video_hevc_hier_coding_type - \footnotesize -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{8.2cm}|p{9.3cm}| .. flat-table:: :header-rows: 0 @@ -2804,7 +2590,7 @@ enum v4l2_mpeg_video_hevc_profile - \footnotesize -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{9.0cm}|p{8.5cm}| .. flat-table:: :header-rows: 0 @@ -2830,47 +2616,21 @@ enum v4l2_mpeg_video_hevc_profile - enum v4l2_mpeg_video_hevc_level - Selects the desired level for HEVC encoder. -.. raw:: latex - - \footnotesize - -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1`` - - Level 1.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2`` - - Level 2.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1`` - - Level 2.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3`` - - Level 3.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1`` - - Level 3.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4`` - - Level 4.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1`` - - Level 4.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5`` - - Level 5.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1`` - - Level 5.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2`` - - Level 5.2 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6`` - - Level 6.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1`` - - Level 6.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2`` - - Level 6.2 - -.. raw:: latex - - \normalsize - +================================== ========= +``V4L2_MPEG_VIDEO_HEVC_LEVEL_1`` Level 1.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_2`` Level 2.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1`` Level 2.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_3`` Level 3.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1`` Level 3.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_4`` Level 4.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1`` Level 4.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_5`` Level 5.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1`` Level 5.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2`` Level 5.2 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_6`` Level 6.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1`` Level 6.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2`` Level 6.2 +================================== ========= ``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)`` Indicates the number of evenly spaced subintervals, called ticks, within @@ -2889,24 +2649,10 @@ enum v4l2_mpeg_video_hevc_tier - this flag to 1 indicates High tier. High tier is for applications requiring high bit rates. -.. raw:: latex - - \footnotesize - -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN`` - - Main tier. - * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH`` - - High tier. - -.. raw:: latex - - \normalsize +================================== ========== +``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN`` Main tier. +``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH`` High tier. +================================== ========== ``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)`` @@ -2962,7 +2708,7 @@ enum v4l2_mpeg_video_hevc_hier_refresh_type - \footnotesize -.. tabularcolumns:: |p{8.0cm}|p{9.0cm}| +.. tabularcolumns:: |p{6.2cm}|p{11.3cm}| .. flat-table:: :header-rows: 0 @@ -3042,7 +2788,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - \footnotesize -.. tabularcolumns:: |p{6.0cm}|p{11.0cm}| +.. tabularcolumns:: |p{5.5cm}|p{12.0cm}| .. flat-table:: :header-rows: 0 @@ -3102,6 +2848,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_ctrl_hevc_sps +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.2cm}|p{9.2cm}|p{6.9cm}| + .. cssclass:: longtable .. flat-table:: struct v4l2_ctrl_hevc_sps @@ -3176,10 +2928,18 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - ``flags`` - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>` +.. raw:: latex + + \normalsize + .. _hevc_sps_flags: ``Sequence Parameter Set Flags`` +.. raw:: latex + + \small + .. cssclass:: longtable .. flat-table:: @@ -3215,6 +2975,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - 0x00000100 - +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)`` Specifies the Picture Parameter Set fields (as extracted from the bitstream) for the associated HEVC slice data. @@ -3224,6 +2988,8 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_ctrl_hevc_pps +.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}| + .. cssclass:: longtable .. flat-table:: struct v4l2_ctrl_hevc_pps @@ -3278,7 +3044,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - ``Picture Parameter Set Flags`` -.. cssclass:: longtable +.. raw:: latex + + \small .. flat-table:: :header-rows: 0 @@ -3343,6 +3111,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - 0x00040000 - +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)`` Specifies various slice-specific parameters, especially from the NAL unit header, general slice segment header and weighted prediction parameter @@ -3353,6 +3125,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_ctrl_hevc_slice_params +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| + .. cssclass:: longtable .. flat-table:: struct v4l2_ctrl_hevc_slice_params @@ -3455,11 +3233,17 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - ``flags`` - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>` +.. raw:: latex + + \normalsize + .. _hevc_slice_params_flags: ``Slice Parameters Flags`` -.. cssclass:: longtable +.. raw:: latex + + \scriptsize .. flat-table:: :header-rows: 0 @@ -3494,9 +3278,17 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - 0x00000100 - +.. raw:: latex + + \normalsize + .. c:type:: v4l2_hevc_dpb_entry -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{12.1cm}| .. flat-table:: struct v4l2_hevc_dpb_entry :header-rows: 0 @@ -3528,9 +3320,17 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - ``padding[2]`` - Applications and drivers must set this to zero. +.. raw:: latex + + \normalsize + .. c:type:: v4l2_hevc_pred_weight_table -.. cssclass:: longtable +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{0.8cm}|p{10.6cm}|p{5.9cm}| .. flat-table:: struct v4l2_hevc_pred_weight_table :header-rows: 0 @@ -3571,6 +3371,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - ``padding[6]`` - Applications and drivers must set this to zero. +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)`` Specifies the decoding mode to use. Currently exposes slice-based and frame-based decoding but new modes might be added later on. @@ -3588,7 +3392,11 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_mpeg_video_hevc_decode_mode -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{9.4cm}|p{0.6cm}|p{7.3cm}| .. flat-table:: :header-rows: 0 @@ -3605,6 +3413,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - The OUTPUT buffer must contain all slices needed to decode the frame. The OUTPUT buffer must also contain both fields. +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)`` Specifies the HEVC slice start code expected for each slice. This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE @@ -3621,7 +3433,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_mpeg_video_hevc_start_code -.. cssclass:: longtable +.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}| .. flat-table:: :header-rows: 0 @@ -3631,7 +3443,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE`` - 0 - Selecting this value specifies that HEVC slices are passed - to the driver without any start code. + to the driver without any start code. The bitstream data should be + according to :ref:`hevc` 7.3.1.1 General NAL unit syntax, hence + contains emulation prevention bytes when required. * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B`` - 1 - Selecting this value specifies that HEVC slices are expected @@ -3646,3 +3460,21 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - so this has to come from client. This is applicable to H264 and valid Range is from 0 to 63. Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1. + +``V4L2_CID_MPEG_VIDEO_LTR_COUNT (integer)`` + Specifies the maximum number of Long Term Reference (LTR) frames at any + given time that the encoder can keep. + This is applicable to the H264 and HEVC encoders. + +``V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (integer)`` + After setting this control the frame that will be queued next + will be marked as a Long Term Reference (LTR) frame + and given this LTR index which ranges from 0 to LTR_COUNT-1. + This is applicable to the H264 and HEVC encoders. + Source Rec. ITU-T H.264 (06/2019); Table 7.9 + +``V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (bitmask)`` + Specifies the Long Term Reference (LTR) frame(s) to be used for + encoding the next frame queued after setting this control. + This provides a bitmask which consists of bits [0, LTR_COUNT-1]. + This is applicable to the H264 and HEVC encoders. diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-colorimetry.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-colorimetry.rst new file mode 100644 index 000000000000..1e7265155715 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-colorimetry.rst @@ -0,0 +1,93 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later + +.. _colorimetry-controls: + +***************************** +Colorimetry Control Reference +***************************** + +The Colorimetry class includes controls for High Dynamic Range +imaging for representing colors in digital images and video. The +controls should be used for video and image encoding and decoding +as well as in HDMI receivers and transmitters. + +Colorimetry Control IDs +----------------------- + +.. _colorimetry-control-id: + +``V4L2_CID_COLORIMETRY_CLASS (class)`` + The Colorimetry class descriptor. Calling + :ref:`VIDIOC_QUERYCTRL` for this control will + return a description of this control class. + +``V4L2_CID_COLORIMETRY_HDR10_CLL_INFO (struct)`` + The Content Light Level defines upper bounds for the nominal target + brightness light level of the pictures. + +.. c:type:: v4l2_ctrl_hdr10_cll_info + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hdr10_cll_info + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u16 + - ``max_content_light_level`` + - The upper bound for the maximum light level among all individual + samples for the pictures of a video sequence, cd/m\ :sup:`2`. + When equal to 0 no such upper bound is present. + * - __u16 + - ``max_pic_average_light_level`` + - The upper bound for the maximum average light level among the + samples for any individual picture of a video sequence, + cd/m\ :sup:`2`. When equal to 0 no such upper bound is present. + +``V4L2_CID_COLORIMETRY_HDR10_MASTERING_DISPLAY (struct)`` + The mastering display defines the color volume (the color primaries, + white point and luminance range) of a display considered to be the + mastering display for the current video content. + +.. c:type:: v4l2_ctrl_hdr10_mastering_display + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hdr10_mastering_display + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u16 + - ``display_primaries_x[3]`` + - Specifies the normalized x chromaticity coordinate of the color + primary component c of the mastering display in increments of 0.00002. + For describing the mastering display that uses Red, Green and Blue + color primaries, index value c equal to 0 corresponds to the Green + primary, c equal to 1 corresponds to Blue primary and c equal to 2 + corresponds to the Red color primary. + * - __u16 + - ``display_primaries_y[3]`` + - Specifies the normalized y chromaticity coordinate of the color + primary component c of the mastering display in increments of 0.00002. + For describing the mastering display that uses Red, Green and Blue + color primaries, index value c equal to 0 corresponds to the Green + primary, c equal to 1 corresponds to Blue primary and c equal to 2 + corresponds to Red color primary. + * - __u16 + - ``white_point_x`` + - Specifies the normalized x chromaticity coordinate of the white + point of the mastering display in increments of 0.00002. + * - __u16 + - ``white_point_y`` + - Specifies the normalized y chromaticity coordinate of the white + point of the mastering display in increments of 0.00002. + * - __u32 + - ``max_luminance`` + - Specifies the nominal maximum display luminance of the mastering + display in units of 0.0001 cd/m\ :sup:`2`. + * - __u32 + - ``min_luminance`` + - specifies the nominal minimum display luminance of the mastering + display in units of 0.0001 cd/m\ :sup:`2`. diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst index a6f696bf89dd..d2794e03ac6d 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst @@ -99,7 +99,7 @@ enum v4l2_dv_it_content_type - or an analog source. The enum v4l2_dv_it_content_type defines the possible content types: -.. tabularcolumns:: |p{7.3cm}|p{10.4cm}| +.. tabularcolumns:: |p{7.3cm}|p{10.2cm}| .. flat-table:: :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst index ad4b878cd034..d22c5efb806a 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst @@ -63,6 +63,7 @@ Flash Control IDs presence of some faults. See V4L2_CID_FLASH_FAULT. +.. tabularcolumns:: |p{5.7cm}|p{11.8cm}| .. flat-table:: :header-rows: 0 @@ -73,14 +74,16 @@ Flash Control IDs * - ``V4L2_FLASH_LED_MODE_FLASH`` - Flash mode. * - ``V4L2_FLASH_LED_MODE_TORCH`` - - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. + - Torch mode. + + See V4L2_CID_FLASH_TORCH_INTENSITY. ``V4L2_CID_FLASH_STROBE_SOURCE (menu)`` Defines the source of the flash LED strobe. -.. tabularcolumns:: |p{7.5cm}|p{10.0cm}| +.. tabularcolumns:: |p{7.5cm}|p{7.5cm}| .. flat-table:: :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst index e07a2dbcd65d..60f9a09422d6 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst @@ -64,13 +64,12 @@ JPEG Control IDs .. _jpeg-quality-control: ``V4L2_CID_JPEG_COMPRESSION_QUALITY (integer)`` - ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control determines trade-off - between image quality and size. It provides simpler method for - applications to control image quality, without a need for direct - reconfiguration of luminance and chrominance quantization tables. In - cases where a driver uses quantization tables configured directly by - an application, using interfaces defined elsewhere, - ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control should be set by + Determines trade-off between image quality and size. + It provides simpler method for applications to control image quality, + without a need for direct reconfiguration of luminance and chrominance + quantization tables. In cases where a driver uses quantization tables + configured directly by an application, using interfaces defined + elsewhere, ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control should be set by driver to 0. The value range of this control is driver-specific. Only positive, diff --git a/Documentation/userspace-api/media/v4l/field-order.rst b/Documentation/userspace-api/media/v4l/field-order.rst index 54548ea4308c..9a0ed8fc550f 100644 --- a/Documentation/userspace-api/media/v4l/field-order.rst +++ b/Documentation/userspace-api/media/v4l/field-order.rst @@ -62,7 +62,7 @@ enum v4l2_field .. c:type:: v4l2_field -.. tabularcolumns:: |p{5.8cm}|p{0.6cm}|p{11.1cm}| +.. tabularcolumns:: |p{5.8cm}|p{0.6cm}|p{10.9cm}| .. cssclass:: longtable diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst index acad5f3ca0c1..6dba70da822b 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst @@ -7,7 +7,13 @@ Compressed Formats .. _compressed-formats: -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. raw:: latex + + \small + +.. tabularcolumns:: |p{5.8cm}|p{1.2cm}|p{10.3cm}| + +.. cssclass:: longtable .. flat-table:: Compressed Image Formats :header-rows: 1 @@ -147,22 +153,17 @@ Compressed Formats - ``V4L2_PIX_FMT_VP8_FRAME`` - 'VP8F' - - VP8 parsed frame, as extracted from the container. - This format is adapted for stateless video decoders that implement a - VP8 pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`). + - VP8 parsed frame, including the frame header, as extracted from the container. + This format is adapted for stateless video decoders that implement an + VP8 pipeline with the :ref:`stateless_decoder`. Metadata associated with the frame to decode is required to be passed - through the ``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER`` control. - See the :ref:`associated Codec Control IDs <v4l2-mpeg-vp8>`. + through the ``V4L2_CID_STATELESS_VP8_FRAME`` control. + See the :ref:`associated Codec Control IDs <v4l2-codec-stateless-vp8>`. Exactly one output and one capture buffer must be provided for use with this pixel format. The output buffer must contain the appropriate number of macroblocks to decode a full corresponding frame to the matching capture buffer. - .. note:: - - This format is not yet part of the public kernel API and it - is expected to change. - * .. _V4L2-PIX-FMT-VP9: - ``V4L2_PIX_FMT_VP9`` @@ -220,3 +221,7 @@ Compressed Formats Metadata associated with the frame to decode is required to be passed through the ``V4L2_CID_STATELESS_FWHT_PARAMS`` control. See the :ref:`associated Codec Control ID <codec-stateless-fwht>`. + +.. raw:: latex + + \normalsize diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst index eb551b57557e..65520c3af7cf 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst @@ -36,10 +36,10 @@ Cb\ :sub:`5-0` Cr\ :sub:`4-0`], and stored in memory in two bytes, .. raw:: latex \begingroup - \tiny + \scriptsize \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{2.5cm}|p{0.69cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}| +.. tabularcolumns:: |p{3.5cm}|p{0.96cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}| .. flat-table:: Packed YUV 4:4:4 Image Formats (less than 8bpc) :header-rows: 2 @@ -220,6 +220,16 @@ the second byte and Y'\ :sub:`7-0` in the third byte. - Y'\ :sub:`7-0` - X\ :sub:`7-0` + * .. _V4L2-PIX-FMT-YUV24: + + - ``V4L2_PIX_FMT_YUV24`` + - 'YUV3' + + - Y'\ :sub:`7-0` + - Cb\ :sub:`7-0` + - Cr\ :sub:`7-0` + - -\ + .. note:: - The alpha component is expected to contain a meaningful value that can be @@ -234,6 +244,12 @@ the second byte and Y'\ :sub:`7-0` in the third byte. These formats, commonly referred to as YUYV or YUY2, subsample the chroma components horizontally by 2, storing 2 pixels in 4 bytes. +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{3.4cm}|p{1.2cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}| + .. flat-table:: Packed YUV 4:2:2 Formats :header-rows: 1 :stub-columns: 0 @@ -301,6 +317,10 @@ components horizontally by 2, storing 2 pixels in 4 bytes. - Y'\ :sub:`3` - Cb\ :sub:`2` +.. raw:: latex + + \normalsize + **Color Sample Location:** Chroma samples are :ref:`interstitially sited<yuv-chroma-centered>` horizontally. @@ -312,6 +332,12 @@ horizontally. This format subsamples the chroma components horizontally by 4, storing 8 pixels in 12 bytes. +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{2.9cm}|p{0.8cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}| + .. flat-table:: Packed YUV 4:1:1 Formats :header-rows: 1 :stub-columns: 0 @@ -348,11 +374,15 @@ pixels in 12 bytes. - Y'\ :sub:`6` - Y'\ :sub:`7` +.. raw:: latex + + \normalsize + .. note:: Do not confuse ``V4L2_PIX_FMT_Y41P`` with :ref:`V4L2_PIX_FMT_YUV411P <V4L2-PIX-FMT-YUV411P>`. Y41P is derived from - "YUV 4:1:1 *packed*", while YUV411P stands for "YUV 4:1:1 *planar*". + "YUV 4:1:1 **packed**", while YUV411P stands for "YUV 4:1:1 **planar**". **Color Sample Location:** Chroma samples are :ref:`interstitially sited<yuv-chroma-centered>` diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst index c9231e18859b..0b879c0da713 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst @@ -17,7 +17,11 @@ you think your format should be listed in a standard format section please make a proposal on the linux-media mailing list. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| + +.. raw:: latex + + \small .. _reserved-formats: @@ -256,3 +260,7 @@ please make a proposal on the linux-media mailing list. of tiles, resulting in 32-aligned resolutions for the luminance plane and 16-aligned resolutions for the chrominance plane (with 2x2 subsampling). + +.. raw:: latex + + \normalsize diff --git a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst index 897676ee2c9d..48b0f787274c 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst @@ -655,12 +655,7 @@ nomenclature that instead use the order of components as seen in a 24- or .. raw:: latex - \begingroup - \tiny - \setlength{\tabcolsep}{2pt} - -.. tabularcolumns:: |p{2.8cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}| - + \small .. flat-table:: RGB Formats With 8 Bits Per Component :header-rows: 1 @@ -765,7 +760,7 @@ nomenclature that instead use the order of components as seen in a 24- or .. raw:: latex - \endgroup + \normalsize Deprecated RGB Formats diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst index 15f1900cd914..3322b0600f1d 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst @@ -9,7 +9,9 @@ V4L2_PIX_FMT_IPU3_SBGGR10 ('ip3b'), V4L2_PIX_FMT_IPU3_SGBRG10 ('ip3g'), V4L2_PIX_FMT_IPU3_SGRBG10 ('ip3G'), V4L2_PIX_FMT_IPU3_SRGGB10 ('ip3r') ********************************************************************************************************************************************** +==================== 10-bit Bayer formats +==================== Description =========== @@ -25,7 +27,11 @@ Below is an example of a small image in V4L2_PIX_FMT_IPU3_SBGGR10 format. **Byte Order.** Each cell is one byte. -.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}| +.. raw:: latex + + \small + +.. tabularcolumns:: |p{0.8cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}| .. flat-table:: @@ -333,3 +339,7 @@ Each cell is one byte. - R\ :sub:`0323high` - G\ :sub:`0324low` - G\ :sub:`0324high`\ (bits 1--0) + +.. raw:: latex + + \normalsize diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst index dc52e827b5d3..fd5feb415531 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst @@ -33,7 +33,7 @@ of a small V4L2_PIX_FMT_SBGGR10P image: **Byte Order.** Each cell is one byte. -.. tabularcolumns:: |p{2.4cm}|p{1.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{6.4cm}| +.. tabularcolumns:: |p{2.4cm}|p{1.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{9.3cm}| .. flat-table:: :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst index a2f8ebfceb84..b6e79e2f8ce4 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst @@ -31,7 +31,7 @@ Below is an example of a small V4L2_PIX_FMT_SBGGR12P image: **Byte Order.** Each cell is one byte. -.. tabularcolumns:: |p{2.2cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}| +.. tabularcolumns:: |p{2.2cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|p{1.2cm}|p{1.2cm}|p{6.4cm}| .. flat-table:: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst index 7e5d45f30cab..4f5120a6c678 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst @@ -11,7 +11,9 @@ V4L2_PIX_FMT_SRGGB14 ('RG14'), V4L2_PIX_FMT_SGRBG14 ('GR14'), V4L2_PIX_FMT_SGBRG *************************************************************************************************************************** +======================================== 14-bit Bayer formats expanded to 16 bits +======================================== Description diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst index e25baedfca77..3572e42adb22 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst @@ -36,9 +36,11 @@ Each cell is one byte. .. raw:: latex + \begingroup \footnotesize + \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{1.8cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{1.1cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}| +.. tabularcolumns:: |p{1.6cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{3.5cm}|p{3.5cm}|p{3.5cm}| .. flat-table:: :header-rows: 0 @@ -141,5 +143,5 @@ Each cell is one byte. .. raw:: latex - \normalsize + \endgroup diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst index 93a210e22592..2f2f1ef430d9 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst @@ -11,7 +11,9 @@ V4L2_PIX_FMT_SRGGB16 ('RG16'), V4L2_PIX_FMT_SGRBG16 ('GR16'), V4L2_PIX_FMT_SGBRG *************************************************************************************************************************** +==================== 16-bit Bayer formats +==================== Description diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst index 81e72f115994..02061c5a9778 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst @@ -10,8 +10,9 @@ V4L2_PIX_FMT_SRGGB8 ('RGGB'), V4L2_PIX_FMT_SGRBG8 ('GRBG'), V4L2_PIX_FMT_SGBRG8 *************************************************************************************************************************** +=================== 8-bit Bayer formats - +=================== Description =========== diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst index 977facc3a1f4..ad4da988c3a3 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst @@ -13,7 +13,7 @@ describing all planes of that format. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{1.4cm}|p{4.0cm}|p{11.9cm}| .. c:type:: v4l2_plane_pix_format @@ -52,7 +52,7 @@ describing all planes of that format. \small -.. tabularcolumns:: |p{4.4cm}|p{5.6cm}|p{7.5cm}| +.. tabularcolumns:: |p{4.4cm}|p{5.6cm}|p{7.3cm}| .. c:type:: v4l2_pix_format_mplane diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst index 71e828093310..9c423ffe02f9 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst @@ -4,7 +4,7 @@ Single-planar format structure ****************************** -.. tabularcolumns:: |p{4.0cm}|p{2.5cm}|p{11.0cm}| +.. tabularcolumns:: |p{4.0cm}|p{2.6cm}|p{10.7cm}| .. c:type:: v4l2_pix_format @@ -205,7 +205,7 @@ Single-planar format structure the flag V4L2_FMT_FLAG_CSC_XFER_FUNC in the corresponding struct :c:type:`v4l2_fmtdesc` during enumeration. See :ref:`fmtdesc-flags`. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.8cm}|p{2.3cm}|p{8.2cm}| .. _format-flags: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst index 0c8c5e0a380e..91942c4f0967 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst @@ -19,6 +19,12 @@ are often referred to as greyscale formats. - `0` denotes padding bits set to 0. +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{3.6cm}|p{3.0cm}|p{1.3cm}|p{2.6cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}| + .. flat-table:: Luma-Only Image Formats :header-rows: 1 :stub-columns: 0 @@ -119,6 +125,10 @@ are often referred to as greyscale formats. - ... - ... +.. raw:: latex + + \normalsize + .. note:: For the Y16 and Y16_BE formats, the actual sampling precision may be lower diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst index 1e0db602cc1b..090c091affd2 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst @@ -48,6 +48,12 @@ relationship between the luma and chroma line padding and stride. All components are stored with the same number of bits per component. +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{5.2cm}|p{1.0cm}|p{1.5cm}|p{1.9cm}|p{1.2cm}|p{1.8cm}|p{2.7cm}| + .. flat-table:: Overview of Semi-Planar YUV Formats :header-rows: 1 :stub-columns: 0 @@ -146,12 +152,14 @@ All components are stored with the same number of bits per component. - Yes - Linear -.. note:: +.. raw:: latex + + \normalsize - .. [1] Order of chroma samples in the second plane - .. [2] Indicates if planes have to be contiguous in memory or can be - disjoint - .. [3] Macroblock size in pixels +.. [1] Order of chroma samples in the second plane +.. [2] Indicates if planes have to be contiguous in memory or can be + disjoint +.. [3] Macroblock size in pixels **Color Sample Location:** @@ -481,6 +489,12 @@ relationship between the luma and chroma line padding and stride. All components are stored with the same number of bits per component. +.. raw:: latex + + \small + +.. tabularcolumns:: |p{5.0cm}|p{1.1cm}|p{1.5cm}|p{2.2cm}|p{1.2cm}|p{3.7cm}| + .. flat-table:: Overview of Fully Planar YUV Formats :header-rows: 1 :stub-columns: 0 @@ -565,11 +579,13 @@ All components are stored with the same number of bits per component. - Y, Cr, Cb - No -.. note:: +.. raw:: latex + + \normalsize - .. [4] Order of luma and chroma planes - .. [5] Indicates if planes have to be contiguous in memory or can be - disjoint +.. [4] Order of luma and chroma planes +.. [5] Indicates if planes have to be contiguous in memory or can be + disjoint **Color Sample Location:** diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst index 7f16cbe46e5c..bd68588b2683 100644 --- a/Documentation/userspace-api/media/v4l/subdev-formats.rst +++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst @@ -5,10 +5,12 @@ Media Bus Formats ================= -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. c:type:: v4l2_mbus_framefmt +.. tabularcolumns:: |p{2.0cm}|p{4.0cm}|p{11.3cm}| + +.. cssclass:: longtable + .. flat-table:: struct v4l2_mbus_framefmt :header-rows: 0 :stub-columns: 0 @@ -113,6 +115,8 @@ Media Bus Formats .. _v4l2-mbus-framefmt-flags: +.. tabularcolumns:: |p{6.5cm}|p{1.6cm}|p{9.2cm}| + .. flat-table:: v4l2_mbus_framefmt Flags :header-rows: 0 :stub-columns: 0 @@ -204,7 +208,7 @@ The following tables list existing packed RGB formats. .. it switches to long table, and there's no way to override it. -.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| +.. tabularcolumns:: |p{5.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| .. _v4l2-mbus-pixelcode-rgb: @@ -1567,8 +1571,8 @@ The following tables list existing packed RGB formats. - MEDIA_BUS_FMT_RGB101010_1X30 - 0x1018 - - - 0 - - 0 + - + - - r\ :sub:`9` - r\ :sub:`8` - r\ :sub:`7` @@ -1890,7 +1894,7 @@ JEIDA defined bit mapping will be named .. raw:: latex - \tiny + \small .. _v4l2-mbus-pixelcode-rgb-lvds: @@ -2152,7 +2156,7 @@ organization is given as an example for the first pixel only. \tiny \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| +.. tabularcolumns:: |p{6.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| .. _v4l2-mbus-pixelcode-bayer: @@ -3005,7 +3009,7 @@ the following codes. \tiny \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| +.. tabularcolumns:: |p{5.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| .. _v4l2-mbus-pixelcode-yuv8: @@ -7210,7 +7214,7 @@ The following table list existing packed 36bit wide YUV formats. \tiny \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| +.. tabularcolumns:: |p{4.1cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| .. _v4l2-mbus-pixelcode-yuv8-36bit: @@ -7398,7 +7402,7 @@ The following table list existing packed 48bit wide YUV formats. \tiny \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| +.. tabularcolumns:: |p{5.6cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| .. _v4l2-mbus-pixelcode-yuv8-48bit: @@ -7851,7 +7855,7 @@ The following table lists existing JPEG compressed formats. .. _v4l2-mbus-pixelcode-jpeg: -.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{10.1cm}| +.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{9.9cm}| .. flat-table:: JPEG Formats :header-rows: 1 @@ -7884,7 +7888,7 @@ formats. .. _v4l2-mbus-pixelcode-vendor-specific: -.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}| +.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.9cm}| .. flat-table:: Vendor and device specific formats :header-rows: 1 @@ -7909,7 +7913,7 @@ This section lists all metadata formats. The following table lists the existing metadata formats. -.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}| +.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.9cm}| .. flat-table:: Metadata formats :header-rows: 1 diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst index 3a834d050110..1cb1531c1e52 100644 --- a/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst +++ b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst @@ -6,10 +6,16 @@ Selection flags *************** -.. tabularcolumns:: |p{5.2cm}|p{2.0cm}|p{6.5cm}|p{1.2cm}|p{1.6cm}| - .. _v4l2-selection-flags-table: +.. raw:: latex + + \small + +.. tabularcolumns:: |p{5.6cm}|p{2.0cm}|p{6.5cm}|p{1.2cm}|p{1.2cm}| + +.. cssclass:: longtable + .. flat-table:: Selection flag definitions :header-rows: 1 :stub-columns: 0 @@ -42,3 +48,7 @@ Selection flags inside the subdevice to all further processing steps. - No - Yes + +.. raw:: latex + + \normalsize diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst index e877ebbdb32e..b46bae984f35 100644 --- a/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst +++ b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst @@ -12,7 +12,13 @@ of the two interfaces they are used. .. _v4l2-selection-targets-table: -.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{7.4cm}|p{1.2cm}|p{1.4cm}| +.. raw:: latex + + \small + +.. tabularcolumns:: |p{6.2cm}|p{1.4cm}|p{7.3cm}|p{1.2cm}|p{0.8cm}| + +.. cssclass:: longtable .. flat-table:: Selection target definitions :header-rows: 1 @@ -69,3 +75,7 @@ of the two interfaces they are used. modified by hardware. - Yes - No + +.. raw:: latex + + \normalsize diff --git a/Documentation/userspace-api/media/v4l/vbi_525.svg b/Documentation/userspace-api/media/v4l/vbi_525.svg index b01086d466a6..1951de29a111 100644 --- a/Documentation/userspace-api/media/v4l/vbi_525.svg +++ b/Documentation/userspace-api/media/v4l/vbi_525.svg @@ -14,7 +14,7 @@ xml:space="preserve" width="208.73068mm" height="51.395489mm" - viewBox="0 0 739.59691 182.11" + viewBox="0 0 788.90338 194.25067" sodipodi:docname="vbi_525.svg"><sodipodi:namedview pagecolor="#ffffff" bordercolor="#666666" @@ -25,7 +25,7 @@ inkscape:pageopacity="0" inkscape:pageshadow="2" inkscape:window-width="1920" - inkscape:window-height="997" + inkscape:window-height="1000" id="namedview4" showgrid="false" fit-margin-top="0" diff --git a/Documentation/userspace-api/media/v4l/vbi_625.svg b/Documentation/userspace-api/media/v4l/vbi_625.svg index 41c1ce920d14..21f524de3aed 100644 --- a/Documentation/userspace-api/media/v4l/vbi_625.svg +++ b/Documentation/userspace-api/media/v4l/vbi_625.svg @@ -14,7 +14,7 @@ xml:space="preserve" width="209.46608mm" height="51.576824mm" - viewBox="0 0 742.20265 182.75252" + viewBox="0 0 791.6828 194.93604" sodipodi:docname="vbi_625.svg"><sodipodi:namedview pagecolor="#ffffff" bordercolor="#666666" @@ -25,7 +25,7 @@ inkscape:pageopacity="0" inkscape:pageshadow="2" inkscape:window-width="1920" - inkscape:window-height="997" + inkscape:window-height="1000" id="namedview4" showgrid="false" fit-margin-top="0" diff --git a/Documentation/userspace-api/media/v4l/vbi_hsync.svg b/Documentation/userspace-api/media/v4l/vbi_hsync.svg index 7fcf12a7ece0..d360251e5f20 100644 --- a/Documentation/userspace-api/media/v4l/vbi_hsync.svg +++ b/Documentation/userspace-api/media/v4l/vbi_hsync.svg @@ -14,7 +14,7 @@ xml:space="preserve" width="192.39857mm" height="146.83536mm" - viewBox="0 0 681.72724 520.28277" + viewBox="0 0 727.17572 554.96826" sodipodi:docname="vbi_hsync.svg"><sodipodi:namedview pagecolor="#ffffff" bordercolor="#666666" @@ -25,7 +25,7 @@ inkscape:pageopacity="0" inkscape:pageshadow="2" inkscape:window-width="1920" - inkscape:window-height="997" + inkscape:window-height="1000" id="namedview4" showgrid="false" inkscape:zoom="1.5350601" diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst index b06e5b528e11..f98f18c9e91c 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst @@ -72,7 +72,7 @@ than the number requested. .. c:type:: v4l2_create_buffers -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_create_buffers :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst index 00c31410d4e4..551ac9d3c6ef 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst @@ -45,7 +45,7 @@ overlay devices. .. c:type:: v4l2_cropcap -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_cropcap :header-rows: 0 @@ -96,7 +96,7 @@ overlay devices. .. _v4l2-rect-crop: -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_rect :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst index bde6e952b267..1a1e093936f1 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst @@ -75,7 +75,7 @@ is available from the LinuxTV v4l-dvb repository; see `https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access instructions. -.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}| +.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{6.6cm}| .. _name-v4l2-dbg-match: @@ -101,7 +101,7 @@ instructions. - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_dbg_chip_info @@ -127,7 +127,7 @@ instructions. - Reserved fields, both application and driver must set these to 0. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _name-chip-match-types: diff --git a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst index e1a6abe705bd..53f10c7319b2 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst @@ -85,7 +85,7 @@ It is available from the LinuxTV v4l-dvb repository; see `https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access instructions. -.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}| +.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{6.6cm}| .. c:type:: v4l2_dbg_match @@ -131,7 +131,7 @@ instructions. - The value read from, or to be written into the register. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _chip-match-types: diff --git a/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst b/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst index fd71ceece037..7ccae3b91616 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst @@ -59,7 +59,7 @@ In principle, these ioctls are optional, not all drivers may support them. They introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decoders (as further documented in :ref:`decoder`). -.. tabularcolumns:: |p{1.1cm}|p{2.4cm}|p{1.2cm}|p{1.6cm}|p{10.6cm}| +.. tabularcolumns:: |p{2.0cm}|p{1.1cm}|p{2.2cm}|p{11.8cm}| .. c:type:: v4l2_decoder_cmd @@ -129,7 +129,9 @@ introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decod - -.. tabularcolumns:: |p{5.6cm}|p{0.6cm}|p{11.3cm}| +.. tabularcolumns:: |p{5.6cm}|p{0.6cm}|p{11.1cm}| + +.. cssclass:: longtable .. _decoder-cmds: diff --git a/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst b/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst index 634af717c8ba..6eb40073c906 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst @@ -37,11 +37,10 @@ structure are filled by the driver. The file handle will also receive exceptions which the application may get by e.g. using the select system call. -.. tabularcolumns:: |p{3.0cm}|p{4.4cm}|p{2.4cm}|p{7.7cm}| - .. c:type:: v4l2_event -.. cssclass: longtable +.. tabularcolumns:: |p{3.0cm}|p{3.4cm}|p{10.9cm}| + .. flat-table:: struct v4l2_event :header-rows: 0 @@ -98,7 +97,7 @@ call. zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.2cm}|p{2.6cm}|p{8.5cm}| .. cssclass:: longtable @@ -188,7 +187,7 @@ call. - Base event number for driver-private events. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_event_vsync @@ -202,7 +201,7 @@ call. - The upcoming field. See enum :c:type:`v4l2_field`. -.. tabularcolumns:: |p{3.5cm}|p{3.0cm}|p{1.8cm}|p{8.5cm}| +.. tabularcolumns:: |p{3.5cm}|p{3.0cm}|p{10.8cm}| .. c:type:: v4l2_event_ctrl @@ -252,7 +251,7 @@ call. :ref:`v4l2_queryctrl <v4l2-queryctrl>`. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_event_frame_sync @@ -266,7 +265,7 @@ call. - The sequence number of the frame being received. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_event_src_change @@ -281,7 +280,7 @@ call. :ref:`src-changes-flags`. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_event_motion_det @@ -310,7 +309,7 @@ call. automatically assigned to the default region 0. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _ctrl-changes-flags: @@ -335,7 +334,7 @@ call. step or the default value of the control changed. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _src-changes-flags: diff --git a/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst index 27bd6a83e42c..8ced100bb156 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst @@ -55,7 +55,7 @@ the desired pad number in the struct zero the ``reserved`` array. Attempts to query capabilities on a pad that doesn't support them will return an ``EINVAL`` error code. -.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}| +.. tabularcolumns:: |p{1.2cm}|p{3.2cm}|p{12.9cm}| .. c:type:: v4l2_bt_timings_cap @@ -96,7 +96,7 @@ that doesn't support them will return an ``EINVAL`` error code. Drivers must set the array to zero. -.. tabularcolumns:: |p{1.0cm}|p{4.0cm}|p{3.5cm}|p{9.2cm}| +.. tabularcolumns:: |p{4.4cm}|p{3.6cm}|p{9.3cm}| .. c:type:: v4l2_dv_timings_cap @@ -128,7 +128,7 @@ that doesn't support them will return an ``EINVAL`` error code. * - } - -.. tabularcolumns:: |p{7.0cm}|p{10.5cm}| +.. tabularcolumns:: |p{7.2cm}|p{10.3cm}| .. _dv-bt-cap-capabilities: diff --git a/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst b/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst index 5673606711b4..2b5867a68b31 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst @@ -66,7 +66,7 @@ These ioctls are optional, not all drivers may support them. They were introduced in Linux 2.6.21. They are, however, mandatory for stateful mem2mem encoders (as further documented in :ref:`encoder`). -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_encoder_cmd @@ -89,7 +89,7 @@ encoders (as further documented in :ref:`encoder`). the array to zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _encoder-cmds: @@ -133,7 +133,7 @@ encoders (as further documented in :ref:`encoder`). the encoder is already running, this command does nothing. No flags are defined for this command. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _encoder-flags: diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst index 20730cd4f6ef..a91c1a3f0e32 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst @@ -67,7 +67,7 @@ return an ``EINVAL`` error code. .. c:type:: v4l2_enum_dv_timings -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_enum_dv_timings :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst index 2b3fa9c23146..000c154b0f98 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst @@ -71,10 +71,12 @@ the ``mbus_code`` field is handled differently: formats shall not depend on the active configuration of the video device or device pipeline. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. c:type:: v4l2_fmtdesc +.. cssclass:: longtable + +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| + .. flat-table:: struct v4l2_fmtdesc :header-rows: 0 :stub-columns: 0 @@ -135,7 +137,9 @@ the ``mbus_code`` field is handled differently: zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{8.4cm}|p{1.8cm}|p{7.1cm}| + +.. cssclass:: longtable .. _fmtdesc-flags: diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst index 1f0949726045..34cd39feaeaa 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst @@ -99,8 +99,6 @@ application should zero out all members except for the *IN* fields. .. c:type:: v4l2_frmival_stepwise -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: struct v4l2_frmival_stepwise :header-rows: 0 :stub-columns: 0 @@ -119,7 +117,7 @@ application should zero out all members except for the *IN* fields. .. c:type:: v4l2_frmivalenum -.. tabularcolumns:: |p{1.8cm}|p{4.4cm}|p{2.4cm}|p{8.9cm}| +.. tabularcolumns:: |p{4.9cm}|p{3.3cm}|p{9.1cm}| .. flat-table:: struct v4l2_frmivalenum :header-rows: 0 @@ -154,7 +152,6 @@ application should zero out all members except for the *IN* fields. - * - __u32 - ``reserved[2]`` - - - Reserved space for future use. Must be zeroed by drivers and applications. @@ -164,7 +161,7 @@ Enums .. c:type:: v4l2_frmivaltypes -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. flat-table:: enum v4l2_frmivaltypes :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst index c9a36bcf699f..7271fe37ce3f 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst @@ -89,8 +89,6 @@ application should zero out all members except for the *IN* fields. .. c:type:: v4l2_frmsize_discrete -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: struct v4l2_frmsize_discrete :header-rows: 0 :stub-columns: 0 @@ -106,8 +104,6 @@ application should zero out all members except for the *IN* fields. .. c:type:: v4l2_frmsize_stepwise -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. flat-table:: struct v4l2_frmsize_stepwise :header-rows: 0 :stub-columns: 0 @@ -135,7 +131,7 @@ application should zero out all members except for the *IN* fields. .. c:type:: v4l2_frmsizeenum -.. tabularcolumns:: |p{1.4cm}|p{5.9cm}|p{2.3cm}|p{8.0cm}| +.. tabularcolumns:: |p{6.4cm}|p{2.8cm}|p{8.1cm}| .. flat-table:: struct v4l2_frmsizeenum :header-rows: 0 @@ -173,7 +169,7 @@ Enums .. c:type:: v4l2_frmsizetypes -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. flat-table:: enum v4l2_frmsizetypes :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst index a0764fca8d18..e385929bed62 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst @@ -40,7 +40,7 @@ fields, and zero out the ``reserved`` array of a struct This ioctl is supported if the ``V4L2_TUNER_CAP_FREQ_BANDS`` capability of the corresponding tuner/modulator is set. -.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}| +.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{2.4cm}| .. c:type:: v4l2_frequency_band @@ -108,7 +108,7 @@ of the corresponding tuner/modulator is set. Applications and drivers must set the array to zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _band-modulation: diff --git a/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst b/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst index 0f62e681a827..d5f0535bd866 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst @@ -38,7 +38,7 @@ fill the rest of the structure or return an ``EINVAL`` error code when the index is out of bounds. To enumerate all inputs applications shall begin at index zero, incrementing by one until the driver returns ``EINVAL``. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{3.0cm}|p{3.5cm}|p{10.8cm}| .. c:type:: v4l2_input @@ -101,7 +101,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``. zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{1.0cm}|p{9.7cm}| .. _input-type: @@ -123,7 +123,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``. - This input is a touch device for capturing raw touch data. -.. tabularcolumns:: |p{4.8cm}|p{2.6cm}|p{10.1cm}| +.. tabularcolumns:: |p{5.6cm}|p{2.6cm}|p{9.1cm}| .. _input-status: @@ -194,7 +194,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``. - VTR time constant. [?] -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.4cm}|p{8.3cm}| .. _input-capabilities: diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst b/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst index 91fcf99094d2..06ee8386ae86 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst @@ -39,7 +39,7 @@ when the index is out of bounds. To enumerate all outputs applications shall begin at index zero, incrementing by one until the driver returns ``EINVAL``. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_output @@ -96,7 +96,7 @@ shall begin at index zero, incrementing by one until the driver returns zero. -.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}| +.. tabularcolumns:: |p{7.5cm}|p{0.6cm}|p{9.2cm}| .. _output-type: @@ -118,7 +118,7 @@ shall begin at index zero, incrementing by one until the driver returns - The video output will be copied to a :ref:`video overlay <overlay>`. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.4cm}|p{2.4cm}|p{8.5cm}| .. _output-capabilities: diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst b/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst index b5704e8cf909..6af71b74d42e 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst @@ -47,7 +47,7 @@ or output. [#f1]_ .. c:type:: v4l2_standard -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_standard :header-rows: 0 @@ -86,7 +86,7 @@ or output. [#f1]_ .. c:type:: v4l2_fract -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_fract :header-rows: 0 @@ -100,7 +100,7 @@ or output. [#f1]_ - ``denominator`` - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. _v4l2-std-id: diff --git a/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst index 212377c90442..982e8bcd9c47 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst @@ -112,7 +112,7 @@ Examples .. c:type:: v4l2_exportbuffer -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_exportbuffer :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst b/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst index 4c93bd55bd97..bf61db04d12e 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst @@ -49,7 +49,7 @@ ioctl. Drivers may switch to a different audio mode if the request cannot be satisfied. However, this is a write-only ioctl, it does not return the actual new audio mode. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_audio @@ -79,7 +79,7 @@ return the actual new audio mode. the array to zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _audio-capability: @@ -99,7 +99,7 @@ return the actual new audio mode. - Automatic Volume Level mode is supported. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _audio-mode: diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst b/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst index 194f22493517..9ab15add2911 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst @@ -58,7 +58,7 @@ as ``VIDIOC_G_AUDOUT`` does. .. c:type:: v4l2_audioout -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_audioout :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst index 0ac1509e41cc..570d98308dc4 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst @@ -71,7 +71,7 @@ When cropping is not supported then no parameters are changed and .. c:type:: v4l2_crop -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_crop :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst index 4f1bed53fad5..80e8c63d530f 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst @@ -57,7 +57,7 @@ These ioctls work only with user controls. For other control classes the .. c:type:: v4l2_control -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_control :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst index 760a33d43b7d..6518d857c131 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst @@ -82,10 +82,12 @@ EBUSY EPERM ``VIDIOC_SUBDEV_S_DV_TIMINGS`` has been called on a read-only subdevice. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - .. c:type:: v4l2_bt_timings +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| + +.. cssclass:: longtable + .. flat-table:: struct v4l2_bt_timings :header-rows: 0 :stub-columns: 0 @@ -171,7 +173,7 @@ EPERM - Reserved for future extensions. Drivers and applications must set the array to zero. -.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{7.0cm}|p{3.5cm}| +.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{7.0cm}|p{3.1cm}| .. c:type:: v4l2_dv_timings @@ -194,7 +196,7 @@ EPERM * - } - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. _dv-timing-types: @@ -213,7 +215,9 @@ EPERM - 0 - BT.656/1120 timings -.. tabularcolumns:: |p{4.5cm}|p{12.8cm}| +.. tabularcolumns:: |p{6.5cm}|p{11.0cm}| + +.. cssclass:: longtable .. _dv-bt-standards: @@ -236,7 +240,9 @@ EPERM There are no horizontal syncs/porches at all in this format. Total blanking timings must be set in hsync or vsync fields only. -.. tabularcolumns:: |p{7.0cm}|p{10.5cm}| +.. tabularcolumns:: |p{7.7cm}|p{9.8cm}| + +.. cssclass:: longtable .. _dv-bt-flags: diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst b/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst index 39d523a449a7..fc5535c50d61 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst @@ -100,7 +100,7 @@ EDID is no longer available. .. c:type:: v4l2_edid -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_edid :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst b/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst index 7698e65ccccf..c6792bbe3d04 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst @@ -54,7 +54,7 @@ will be zero. Currently this ioctl is only defined for MPEG-2 program streams and video elementary streams. -.. tabularcolumns:: |p{3.8cm}|p{5.6cm}|p{8.1cm}| +.. tabularcolumns:: |p{4.2cm}|p{6.2cm}|p{6.9cm}| .. c:type:: v4l2_enc_idx @@ -81,7 +81,7 @@ video elementary streams. their ``offset``. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_enc_idx_entry @@ -113,7 +113,7 @@ video elementary streams. - Reserved for future extensions. Drivers must set the array to zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _enc-idx-flags: diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst index b9c62affbb5a..3ba22983d21f 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst @@ -118,11 +118,15 @@ correct. This prevents the situation where only some of the controls were set/get. Only low-level errors (e. g. a failed i2c command) can still cause this situation. -.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{1.5cm}|p{11.8cm}| +.. tabularcolumns:: |p{6.8cm}|p{4.0cm}|p{6.5cm}| .. c:type:: v4l2_ext_control -.. cssclass: longtable +.. raw:: latex + + \footnotesize + +.. cssclass:: longtable .. flat-table:: struct v4l2_ext_control :header-rows: 0 @@ -134,11 +138,12 @@ still cause this situation. - Identifies the control, set by the application. * - __u32 - ``size`` - - The total size in bytes of the payload of this control. This is - normally 0, but for pointer controls this should be set to the - size of the memory containing the payload, or that will receive - the payload. If :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` finds that this value is - less than is required to store the payload result, then it is set + - The total size in bytes of the payload of this control. + * - :cspan:`2` The ``size`` field is normally 0, but for pointer + controls this should be set to the size of the memory that contains + the payload or that will receive the payload. + If :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` finds that this value + is less than is required to store the payload result, then it is set to a value large enough to store the payload result and ``ENOSPC`` is returned. @@ -212,6 +217,18 @@ still cause this situation. - ``p_fwht_params`` - A pointer to a struct :c:type:`v4l2_ctrl_fwht_params`. Valid if this control is of type ``V4L2_CTRL_TYPE_FWHT_PARAMS``. + * - struct :c:type:`v4l2_ctrl_vp8_frame` * + - ``p_vp8_frame`` + - A pointer to a struct :c:type:`v4l2_ctrl_vp8_frame`. Valid if this control is + of type ``V4L2_CTRL_TYPE_VP8_FRAME``. + * - struct :c:type:`v4l2_ctrl_hdr10_cll_info` * + - ``p_hdr10_cll`` + - A pointer to a struct :c:type:`v4l2_ctrl_hdr10_cll_info`. Valid if this control is + of type ``V4L2_CTRL_TYPE_HDR10_CLL_INFO``. + * - struct :c:type:`v4l2_ctrl_hdr10_mastering_display` * + - ``p_hdr10_mastering`` + - A pointer to a struct :c:type:`v4l2_ctrl_hdr10_mastering_display`. Valid if this control is + of type ``V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY``. * - void * - ``ptr`` - A pointer to a compound type which can be an N-dimensional array @@ -221,7 +238,11 @@ still cause this situation. * - } - -.. tabularcolumns:: |p{4.0cm}|p{2.2cm}|p{2.1cm}|p{8.2cm}| +.. raw:: latex + + \normalsize + +.. tabularcolumns:: |p{4.0cm}|p{2.5cm}|p{10.8cm}| .. c:type:: v4l2_ext_controls @@ -235,29 +256,18 @@ still cause this situation. * - union { - (anonymous) * - __u32 - - ``ctrl_class`` - - The control class to which all controls belong, see - :ref:`ctrl-class`. Drivers that use a kernel framework for - handling controls will also accept a value of 0 here, meaning that - the controls can belong to any control class. Whether drivers - support this can be tested by setting ``ctrl_class`` to 0 and - calling :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` with a ``count`` of 0. If that - succeeds, then the driver supports this feature. - * - __u32 - ``which`` - Which value of the control to get/set/try. - ``V4L2_CTRL_WHICH_CUR_VAL`` will return the current value of the - control, ``V4L2_CTRL_WHICH_DEF_VAL`` will return the default + * - :cspan:`2` ``V4L2_CTRL_WHICH_CUR_VAL`` will return the current value of + the control, ``V4L2_CTRL_WHICH_DEF_VAL`` will return the default value of the control and ``V4L2_CTRL_WHICH_REQUEST_VAL`` indicates that these controls have to be retrieved from a request or tried/set for a request. In the latter case the ``request_fd`` field contains the file descriptor of the request that should be used. If the device does not support requests, then ``EACCES`` will be returned. - .. note:: - - When using ``V4L2_CTRL_WHICH_DEF_VAL`` be aware that you can only - get the default value of the control, you cannot set or try it. + When using ``V4L2_CTRL_WHICH_DEF_VAL`` be aware that you can only + get the default value of the control, you cannot set or try it. For backwards compatibility you can also use a control class here (see :ref:`ctrl-class`). In that case all controls have to @@ -265,9 +275,12 @@ still cause this situation. just use ``V4L2_CTRL_WHICH_CUR_VAL``. There are some very old drivers that do not yet support ``V4L2_CTRL_WHICH_CUR_VAL`` and that require a control class here. You can test for such drivers - by setting ctrl_class to ``V4L2_CTRL_WHICH_CUR_VAL`` and calling - VIDIOC_TRY_EXT_CTRLS with a count of 0. If that fails, then the - driver does not support ``V4L2_CTRL_WHICH_CUR_VAL``. + by setting ``which`` to ``V4L2_CTRL_WHICH_CUR_VAL`` and calling + :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` with a count of 0. + If that fails, then the driver does not support ``V4L2_CTRL_WHICH_CUR_VAL``. + * - __u32 + - ``ctrl_class`` + - Deprecated name kept for backwards compatibility. Use ``which`` instead. * - } - * - __u32 @@ -275,7 +288,8 @@ still cause this situation. - The number of controls in the controls array. May also be zero. * - __u32 - ``error_idx`` - - Set by the driver in case of an error. If the error is associated + - Index of the failing control. Set by the driver in case of an error. + * - :cspan:`2` If the error is associated with a particular control, then ``error_idx`` is set to the index of that control. If the error is not related to a specific control, or the validation step failed (see below), then @@ -334,7 +348,9 @@ still cause this situation. Ignored if ``count`` equals zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{7.3cm}|p{2.0cm}|p{8.0cm}| + +.. cssclass:: longtable .. _ctrl-class: @@ -394,6 +410,10 @@ still cause this situation. - 0xa40000 - The class containing stateless codec controls. These controls are described in :ref:`codec-stateless-controls`. + * - ``V4L2_CTRL_CLASS_COLORIMETRY`` + - 0xa50000 + - The class containing colorimetry controls. These controls are + described in :ref:`colorimetry-controls`. Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst index dc1f16343b22..b6cc1a823207 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst @@ -75,7 +75,7 @@ jeopardize the system security, its stability or even damage the hardware, therefore only the superuser can set the parameters for a destructive video overlay. -.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}| +.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{6.6cm}| .. c:type:: v4l2_framebuffer @@ -207,7 +207,7 @@ destructive video overlay. - ``priv`` - Reserved. Drivers and applications must set this field to zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{7.4cm}|p{1.6cm}|p{8.3cm}| .. _framebuffer-cap: @@ -255,7 +255,7 @@ destructive video overlay. chroma-key colors are replaced by framebuffer pixels, which is exactly opposite of ``V4L2_FBUF_CAP_CHROMAKEY`` -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{7.4cm}|p{1.6cm}|p{8.3cm}| .. _framebuffer-flags: diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst index 7e9f8475ea63..675c385e5aca 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst @@ -89,7 +89,7 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical .. c:type:: v4l2_format -.. tabularcolumns:: |p{1.2cm}|p{4.6cm}|p{3.0cm}|p{8.6cm}| +.. tabularcolumns:: |p{7.4cm}|p{4.4cm}|p{5.5cm}| .. flat-table:: struct v4l2_format :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst b/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst index 5445a4a442e4..0d037665a89e 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst @@ -51,7 +51,7 @@ structure. When the requested frequency is not possible the driver assumes the closest possible value. However :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` is a write-only ioctl, it does not return the actual new frequency. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_frequency diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst b/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst index 93ed111dfcb9..d4565d2cc1f5 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst @@ -54,7 +54,7 @@ stored in the JPEG-encoded fields. These define how the JPEG field is encoded. If you omit them, applications assume you've used standard encoding. You usually do want to add them. -.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}| +.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.1cm}| .. c:type:: v4l2_jpegcompression @@ -91,7 +91,7 @@ encoding. You usually do want to add them. control is exposed by a driver applications should use it instead and ignore this field. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _jpeg-markers: diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst index 2ac2473e341b..6bdf925f9a4a 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst @@ -60,7 +60,7 @@ context. To change the radio frequency the :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available. -.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}| +.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{2.4cm}| .. c:type:: v4l2_modulator @@ -119,8 +119,9 @@ To change the radio frequency the Drivers and applications must set the array to zero. +.. tabularcolumns:: |p{6.0cm}|p{2.0cm}|p{9.3cm}| -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. cssclass:: longtable .. _modulator-txsubchans: diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst index 724f7fa7bae1..8b5600fbf013 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst @@ -56,7 +56,7 @@ To get and set the streaming parameters applications call the pointer to a struct :c:type:`v4l2_streamparm` which contains a union holding separate parameters for input and output devices. -.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}| +.. tabularcolumns:: |p{3.7cm}|p{3.5cm}|p{10.1cm}| .. c:type:: v4l2_streamparm @@ -85,10 +85,9 @@ union holding separate parameters for input and output devices. - ``raw_data``\ [200] - A place holder for future extensions. * - } - - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_captureparm @@ -147,7 +146,7 @@ union holding separate parameters for input and output devices. the array to zero. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_outputparm @@ -207,7 +206,7 @@ union holding separate parameters for input and output devices. the array to zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _parm-caps: @@ -222,7 +221,7 @@ union holding separate parameters for input and output devices. field. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _parm-flags: diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst b/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst index d72a0c716fca..3031256159c3 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst @@ -45,7 +45,7 @@ with a pointer to this variable. .. c:type:: v4l2_priority -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. flat-table:: enum v4l2_priority :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst index 9a9e589cce77..2b5b27260741 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst @@ -129,7 +129,7 @@ Selection targets and flags are documented in .. c:type:: v4l2_selection -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_selection :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst index 752f7f5fae73..90d40f6af57b 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst @@ -45,7 +45,7 @@ the sliced VBI API is unsupported or ``type`` is invalid. .. c:type:: v4l2_sliced_vbi_cap -.. tabularcolumns:: |p{1.2cm}|p{4.2cm}|p{4.1cm}|p{4.0cm}|p{4.0cm}| +.. tabularcolumns:: |p{1.4cm}|p{4.4cm}|p{4.5cm}|p{3.6cm}|p{3.6cm}| .. flat-table:: struct v4l2_sliced_vbi_cap :header-rows: 0 @@ -122,7 +122,7 @@ the sliced VBI API is unsupported or ``type`` is invalid. \scriptsize -.. tabularcolumns:: |p{3.5cm}|p{1.0cm}|p{2.0cm}|p{2.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{3.9cm}|p{1.0cm}|p{2.0cm}|p{3.0cm}|p{7.0cm}| .. _vbi-services: @@ -162,13 +162,7 @@ the sliced VBI API is unsupported or ``type`` is invalid. :ref:`itu1119` - PAL/SECAM line 23 - - - - :: - - Byte 0 1 - msb lsb msb lsb - Bit 7 6 5 4 3 2 1 0 x x 13 12 11 10 9 + - See :ref:`v4l2-sliced-vbi-cap-wss-625-payload` below. * - ``V4L2_SLICED_VBI_525`` - 0x1000 - :cspan:`2` Set of services applicable to 525 line systems. @@ -176,10 +170,27 @@ the sliced VBI API is unsupported or ``type`` is invalid. - 0x4401 - :cspan:`2` Set of services applicable to 625 line systems. + .. raw:: latex \normalsize +.. _v4l2-sliced-vbi-cap-wss-625-payload: + +V4L2_SLICED_VBI_CAP WSS_625 payload +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The payload for ``V4L2_SLICED_WSS_625`` is: + + +-----+------------------+-----------------------+ + |Byte | 0 | 1 | + +-----+--------+---------+-----------+-----------+ + | | msb | lsb | msb | lsb | + | +-+-+-+--+--+-+-+--+--+-+--+---+---+--+-+--+ + | Bit |7|6|5|4 | 3|2|1|0 | x|x|13|12 | 11|10|9|8 | + +-----+-+-+-+--+--+-+-+--+--+-+--+---+---+--+-+--+ + + Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst b/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst index 116e66c01556..b0522f1ff7a4 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst @@ -59,7 +59,7 @@ to zero. The term 'tuner' means SDR receiver in this context. To change the radio frequency the :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available. - .. tabularcolumns:: |p{1.3cm}|p{3.0cm}|p{6.6cm}|p{6.6cm}| + .. tabularcolumns:: |p{1.3cm}|p{3.0cm}|p{7.0cm}|p{5.8cm}| .. c:type:: v4l2_tuner @@ -182,7 +182,7 @@ To change the radio frequency the Drivers and applications must set the array to zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. c:type:: v4l2_tuner_type @@ -205,7 +205,7 @@ To change the radio frequency the - 5 - Tuner controls the RF part of a Software Digital Radio (SDR) -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{7.0cm}|p{2.2cm}|p{8.1cm}| .. _tuner-capability: @@ -296,7 +296,7 @@ To change the radio frequency the instead of 62.5 kHz. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _tuner-rxsubchans: @@ -334,7 +334,7 @@ To change the radio frequency the - The tuner receives an RDS channel. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _tuner-audmode: diff --git a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst index b512b1fbf9a3..63e23f6f95ee 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst @@ -38,10 +38,12 @@ pointer to a struct :c:type:`v4l2_capability` which is filled by the driver. When the driver is not compatible with this specification the ioctl returns an ``EINVAL`` error code. -.. tabularcolumns:: |p{1.5cm}|p{2.5cm}|p{13cm}| - .. c:type:: v4l2_capability +.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{13.1cm}| + +.. cssclass:: longtable + .. flat-table:: struct v4l2_capability :header-rows: 0 :stub-columns: 0 @@ -130,7 +132,7 @@ specification the ioctl returns an ``EINVAL`` error code. zero. -.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{7.0cm}|p{2.6cm}|p{7.7cm}| .. _device-capabilities: diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst index 82f61f1e2fb8..8a285daedc6a 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst @@ -94,7 +94,7 @@ inclusive. See also the examples in :ref:`control`. -.. tabularcolumns:: |p{1.2cm}|p{3.6cm}|p{12.7cm}| +.. tabularcolumns:: |p{1.2cm}|p{3.6cm}|p{12.5cm}| .. _v4l2-queryctrl: @@ -172,7 +172,7 @@ See also the examples in :ref:`control`. zero. -.. tabularcolumns:: |p{1.2cm}|p{5.0cm}|p{11.3cm}| +.. tabularcolumns:: |p{1.2cm}|p{5.5cm}|p{10.6cm}| .. _v4l2-query-ext-ctrl: @@ -272,7 +272,7 @@ See also the examples in :ref:`control`. the array to zero. -.. tabularcolumns:: |p{1.2cm}|p{1.0cm}|p{1.7cm}|p{13.0cm}| +.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.1cm}| .. _v4l2-querymenu: @@ -306,10 +306,13 @@ See also the examples in :ref:`control`. - Reserved for future extensions. Drivers must set the array to zero. +.. c:type:: v4l2_ctrl_type -.. tabularcolumns:: |p{5.8cm}|p{1.4cm}|p{1.0cm}|p{1.4cm}|p{6.9cm}| +.. raw:: latex -.. c:type:: v4l2_ctrl_type + \footnotesize + +.. tabularcolumns:: |p{6.5cm}|p{1.5cm}|p{1.1cm}|p{1.5cm}|p{6.8cm}| .. cssclass:: longtable @@ -486,13 +489,23 @@ See also the examples in :ref:`control`. - n/a - A struct :c:type:`v4l2_ctrl_hevc_slice_params`, containing HEVC slice parameters for stateless video decoders. + * - ``V4L2_CTRL_TYPE_VP8_FRAME`` + - n/a + - n/a + - n/a + - A struct :c:type:`v4l2_ctrl_vp8_frame`, containing VP8 + frame parameters for stateless video decoders. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. raw:: latex -.. _control-flags: + \normalsize + +.. tabularcolumns:: |p{7.3cm}|p{1.8cm}|p{8.2cm}| .. cssclass:: longtable +.. _control-flags: + .. flat-table:: Control Flags :header-rows: 0 :stub-columns: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst index c1c88e00b106..50ea72043bb0 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst @@ -71,7 +71,7 @@ aborting or finishing any DMA in progress, an implicit .. c:type:: v4l2_requestbuffers -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_requestbuffers :header-rows: 0 @@ -109,8 +109,6 @@ aborting or finishing any DMA in progress, an implicit - A place holder for future extensions. Drivers and applications must set the array to zero. -.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}| - .. _v4l2-buf-capabilities: .. _V4L2-BUF-CAP-SUPPORTS-MMAP: .. _V4L2-BUF-CAP-SUPPORTS-USERPTR: @@ -120,6 +118,12 @@ aborting or finishing any DMA in progress, an implicit .. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF: .. _V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS: +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{8.1cm}|p{2.2cm}|p{7.0cm}| + .. cssclass:: longtable .. flat-table:: V4L2 Buffer Capabilities Flags @@ -157,6 +161,10 @@ aborting or finishing any DMA in progress, an implicit :ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>` and :ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>`. +.. raw:: latex + + \normalsize + Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst index 1948f31c2dbc..ed10f380579a 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst @@ -58,7 +58,7 @@ set. If this ioctl is called from a non-blocking filehandle, then ``EAGAIN`` error code is returned and no seek takes place. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_hw_freq_seek diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst index 17acf3fd8396..3703943b412f 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst @@ -61,7 +61,7 @@ multiple pads of the same sub-device is not defined. .. c:type:: v4l2_subdev_frame_interval_enum -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_subdev_frame_interval_enum :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst index 8016fba7023f..c25a9896df0e 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst @@ -63,7 +63,7 @@ information about try formats. .. c:type:: v4l2_subdev_frame_size_enum -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_subdev_frame_size_enum :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst index 1fd950e34a0b..417f1a19bcc4 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst @@ -48,7 +48,7 @@ information about the try formats. .. c:type:: v4l2_subdev_mbus_code_enum -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_subdev_mbus_code_enum :header-rows: 0 @@ -79,7 +79,11 @@ information about the try formats. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{7.7cm}| +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{8.8cm}|p{2.2cm}|p{6.3cm}| .. _v4l2-subdev-mbus-code-flags: @@ -124,6 +128,10 @@ information about the try formats. ioctl with :ref:`V4L2_MBUS_FRAMEFMT_SET_CSC <mbus-framefmt-set-csc>` set. See :ref:`v4l2-mbus-format` on how to do this. +.. raw:: latex + + \normalsize + Return Value ============ diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst index 2d78b4f5928d..bd15c0a5a66b 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst @@ -78,7 +78,7 @@ modified format should be as close as possible to the original request. .. c:type:: v4l2_subdev_crop -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_subdev_crop :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst index 90b9bbfb61dd..7acdbb939d89 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst @@ -81,7 +81,7 @@ doesn't match the device capabilities. They must instead modify the format to match what the hardware can provide. The modified format should be as close as possible to the original request. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. c:type:: v4l2_subdev_format @@ -107,7 +107,7 @@ should be as close as possible to the original request. the array to zero. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}| .. _v4l2-subdev-format-whence: diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst index 3a50f8b2843d..d7fe7543c506 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst @@ -76,7 +76,7 @@ the same sub-device is not defined. .. c:type:: v4l2_subdev_frame_interval -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_subdev_frame_interval :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst index f35b9562df21..f9172a42f036 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst @@ -70,7 +70,7 @@ Selection targets and flags are documented in .. c:type:: v4l2_subdev_selection -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| .. flat-table:: struct v4l2_subdev_selection :header-rows: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst index 949d9775b03d..9b8d8644ec0f 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst @@ -38,7 +38,7 @@ a struct :c:type:`v4l2_subdev_capability` which is filled by the driver. When the driver is not compatible with this specification the ioctl returns ``ENOTTY`` error code. -.. tabularcolumns:: |p{1.5cm}|p{2.5cm}|p{13cm}| +.. tabularcolumns:: |p{1.5cm}|p{2.9cm}|p{12.9cm}| .. c:type:: v4l2_subdev_capability @@ -75,7 +75,7 @@ the driver is not compatible with this specification the ioctl returns - ``reserved``\ [14] - Reserved for future extensions. Set to 0 by the V4L2 core. -.. tabularcolumns:: |p{6cm}|p{2.2cm}|p{8.8cm}| +.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.1cm}| .. _subdevice-capabilities: diff --git a/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst b/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst index d1ad35164033..a6fc3c5fe99d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst @@ -39,7 +39,7 @@ Description Subscribe or unsubscribe V4L2 event. Subscribed events are dequeued by using the :ref:`VIDIOC_DQEVENT` ioctl. -.. tabularcolumns:: |p{4.6cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{2.6cm}|p{4.4cm}|p{10.3cm}| .. c:type:: v4l2_event_subscription @@ -71,7 +71,7 @@ using the :ref:`VIDIOC_DQEVENT` ioctl. the array to zero. -.. tabularcolumns:: |p{6.8cm}|p{2.2cm}|p{8.5cm}| +.. tabularcolumns:: |p{7.5cm}|p{2.0cm}|p{7.8cm}| .. _event-flags: |
