1 files changed, 0 insertions, 68 deletions
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
deleted file mode 100644
index e1365b0ee1e9..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
-
-The Freescale S/PDIF audio block is a stereo transceiver that allows the
-processor to receive and transmit digital audio via an coaxial cable or
-a fibre cable.
-
-Required properties:
-
-  - compatible		: Compatible list, should contain one of the following
-			  compatibles:
-			  "fsl,imx35-spdif",
-			  "fsl,vf610-spdif",
-			  "fsl,imx6sx-spdif",
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the spdif interrupt.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Two dmas have to be defined, "tx" and "rx".
-
-  - clocks		: Contains an entry for each entry in clock-names.
-
-  - clock-names		: Includes the following entries:
-	"core"		  The core clock of spdif controller.
-	"rxtx<0-7>"	  Clock source list for tx and rx clock.
-			  This clock list should be identical to the source
-			  list connecting to the spdif clock mux in "SPDIF
-			  Transceiver Clock Diagram" of SoC reference manual.
-			  It can also be referred to TxClk_Source bit of
-			  register SPDIF_STC.
-	"spba"		  The spba clock is required when SPDIF is placed as a
-			  bus slave of the Shared Peripheral Bus and when two
-			  or more bus masters (CPU, DMA or DSP) try to access
-			  it. This property is optional depending on the SoC
-			  design.
-
-Optional properties:
-
-   - big-endian		: If this property is absent, the native endian mode
-			  will be in use as default, or the big endian mode
-			  will be in use for all the device registers.
-
-Example:
-
-spdif: spdif@2004000 {
-	compatible = "fsl,imx35-spdif";
-	reg = <0x02004000 0x4000>;
-	interrupts = <0 52 0x04>;
-	dmas = <&sdma 14 18 0>,
-	       <&sdma 15 18 0>;
-	dma-names = "rx", "tx";
-
-	clocks = <&clks 197>, <&clks 3>,
-	       <&clks 197>, <&clks 107>,
-	       <&clks 0>, <&clks 118>,
-	       <&clks 62>, <&clks 139>,
-	       <&clks 0>;
-	clock-names = "core", "rxtx0",
-		"rxtx1", "rxtx2",
-		"rxtx3", "rxtx4",
-		"rxtx5", "rxtx6",
-		"rxtx7";
-
-	big-endian;
-};