diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iommu/mediatek,iommu.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/iommu/mediatek,iommu.txt | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt deleted file mode 100644 index ac949f7fe3d4..000000000000 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt +++ /dev/null @@ -1,105 +0,0 @@ -* Mediatek IOMMU Architecture Implementation - - Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U), and -this M4U have two generations of HW architecture. Generation one uses flat -pagetable, and only supports 4K size page mapping. Generation two uses the -ARM Short-Descriptor translation table format for address translation. - - About the M4U Hardware Block Diagram, please check below: - - EMI (External Memory Interface) - | - m4u (Multimedia Memory Management Unit) - | - +--------+ - | | - gals0-rx gals1-rx (Global Async Local Sync rx) - | | - | | - gals0-tx gals1-tx (Global Async Local Sync tx) - | | Some SoCs may have GALS. - +--------+ - | - SMI Common(Smart Multimedia Interface Common) - | - +----------------+------- - | | - | gals-rx There may be GALS in some larbs. - | | - | | - | gals-tx - | | - SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb). - (display) (vdec) - | | - | | - +-----+-----+ +----+----+ - | | | | | | - | | |... | | | ... There are different ports in each larb. - | | | | | | -OVL0 RDMA0 WDMA0 MC PP VLD - - As above, The Multimedia HW will go through SMI and M4U while it -access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain -smi local arbiter and smi common. It will control whether the Multimedia -HW should go though the m4u for translation or bypass it and talk -directly with EMI. And also SMI help control the power domain and clocks for -each local arbiter. - Normally we specify a local arbiter(larb) for each multimedia HW -like display, video decode, and camera. And there are different ports -in each larb. Take a example, There are many ports like MC, PP, VLD in the -video decode local arbiter, all these ports are according to the video HW. - In some SoCs, there may be a GALS(Global Async Local Sync) module between -smi-common and m4u, and additional GALS module between smi-larb and -smi-common. GALS can been seen as a "asynchronous fifo" which could help -synchronize for the modules in different clock frequency. - -Required properties: -- compatible : must be one of the following string: - "mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW. - "mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW. - "mediatek,mt6779-m4u" for mt6779 which uses generation two m4u HW. - "mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses - generation one m4u HW. - "mediatek,mt8167-m4u" for mt8167 which uses generation two m4u HW. - "mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW. - "mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW. -- reg : m4u register base and size. -- interrupts : the interrupt of m4u. -- clocks : must contain one entry for each clock-names. -- clock-names : Only 1 optional clock: - - "bclk": the block clock of m4u. - Here is the list which require this "bclk": - - mt2701, mt2712, mt7623 and mt8173. - Note that m4u use the EMI clock which always has been enabled before kernel - if there is no this "bclk". -- mediatek,larbs : List of phandle to the local arbiters in the current Socs. - Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort - according to the local arbiter index, like larb0, larb1, larb2... -- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. - Specifies the mtk_m4u_id as defined in - dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623 - dt-binding/memory/mt2712-larb-port.h for mt2712, - dt-binding/memory/mt6779-larb-port.h for mt6779, - dt-binding/memory/mt8167-larb-port.h for mt8167, - dt-binding/memory/mt8173-larb-port.h for mt8173, and - dt-binding/memory/mt8183-larb-port.h for mt8183. - -Example: - iommu: iommu@10205000 { - compatible = "mediatek,mt8173-m4u"; - reg = <0 0x10205000 0 0x1000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_M4U>; - clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 &larb4 &larb5>; - #iommu-cells = <1>; - }; - -Example for a client device: - display { - compatible = "mediatek,mt8173-disp"; - iommus = <&iommu M4U_PORT_DISP_OVL0>, - <&iommu M4U_PORT_DISP_RDMA0>; - ... - }; |