1 files changed, 33 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
new file mode 100644
index 000000000000..a289964756a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
@@ -0,0 +1,33 @@
+Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
+
+http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
+
+Required properties:
+ - compatible : should be "adi,adxl372"
+ - reg: the I2C address or SPI chip select number for the device
+
+Required properties for SPI bus usage:
+ - spi-max-frequency: Max SPI frequency to use
+
+Optional properties:
+ - interrupts: interrupt mapping for IRQ as documented in
+   Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Example for a I2C device node:
+
+	accelerometer@53 {
+		compatible = "adi,adxl372";
+		reg = <0x53>;
+		interrupt-parent = <&gpio>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+Example for a SPI device node:
+
+	accelerometer@0 {
+		compatible = "adi,adxl372";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	};