diff options
57 files changed, 158 insertions, 193 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 87b63fde06d7..245058b3b0ef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -175,13 +175,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool -config ARCH_HAS_CPUFREQ - bool - help - Internal node to signify that the ARCH has CPUFREQ support - and that the relevant menu configurations are displayed for - it. - config ARCH_HAS_BANDGAP bool @@ -318,7 +311,6 @@ config ARCH_MULTIPLATFORM config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" - select ARCH_HAS_CPUFREQ select ARM_AMBA select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR @@ -538,7 +530,6 @@ config ARCH_DOVE config ARCH_KIRKWOOD bool "Marvell Kirkwood" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select GENERIC_CLOCKEVENTS @@ -637,7 +628,6 @@ config ARCH_LPC32XX config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU - select ARCH_HAS_CPUFREQ select ARCH_MTD_XIP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM @@ -707,7 +697,6 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" - select ARCH_HAS_CPUFREQ select ARCH_MTD_XIP select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE @@ -725,7 +714,6 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ATAGS select CLKDEV_LOOKUP @@ -746,7 +734,6 @@ config ARCH_S3C24XX config ARCH_S3C64XX bool "Samsung S3C64XX" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC @@ -809,7 +796,6 @@ config ARCH_S5PC100 config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE select ATAGS @@ -845,7 +831,6 @@ config ARCH_DAVINCI config ARCH_OMAP1 bool "TI OMAP1" depends on MMU - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB @@ -1009,8 +994,6 @@ source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-sa1100/Kconfig" -source "arch/arm/plat-samsung/Kconfig" - source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/mach-spear/Kconfig" @@ -1028,6 +1011,7 @@ source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" source "arch/arm/mach-exynos/Kconfig" +source "arch/arm/plat-samsung/Kconfig" source "arch/arm/mach-shmobile/Kconfig" @@ -2109,9 +2093,7 @@ endmenu menu "CPU Power Management" -if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" -endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff63b901..adb5ed9e269e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ stih415-b2020.dtb \ stih416-b2000.dtb \ stih416-b2020.dtb \ - stih416-b2020-revE.dtb + stih416-b2020e.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 772fec2d26ce..1e2919d43d78 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -91,6 +91,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index ff9637dd8d0f..5bae4731828b 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -98,6 +98,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index e5c6a0492ca0..4e5a59ee1501 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -25,7 +25,7 @@ memory { device_type = "memory"; - reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ + reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */ }; soc { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index b8ece4be41ca..fbaf426d2daa 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -113,7 +113,7 @@ compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x10490000 0x1000>, <0x10480000 0x100>; + reg = <0x10490000 0x10000>, <0x10480000 0x10000>; }; combiner: interrupt-controller@10440000 { diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index d6f254f302fe..a0f6f75fe3b5 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -169,8 +169,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -192,8 +192,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020e.dts index ba0fa2caaf18..ba0fa2caaf18 100644 --- a/arch/arm/boot/dts/stih416-b2020-revE.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 06473c5d9ea9..84758d76d064 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -175,8 +175,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -197,8 +197,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e2d62048e198..be1a3455a9fe 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -300,6 +300,7 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y @@ -352,6 +353,7 @@ CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y +CONFIG_QCOM_GSBI=y CONFIG_COMMON_CLK_QCOM=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index e11170e37442..b0bfefa23902 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -14,6 +14,7 @@ CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_XP=y +CONFIG_MACH_DOVE=y CONFIG_NEON=y # CONFIG_CACHE_L2X0 is not set # CONFIG_SWP_EMULATE is not set @@ -52,6 +53,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_SPI=y CONFIG_SPI_ORION=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 59066cf0271a..536a137863cb 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -32,6 +32,7 @@ CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y +CONFIG_CACHE_L2X0=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y CONFIG_SMP=y diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 9bc6db1c1348..41c839167e87 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,10 +1,9 @@ -config ARCH_BCM +menuconfig ARCH_BCM bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7 help This enables support for Broadcom ARM based SoC chips -menu "Broadcom SoC Selection" - depends on ARCH_BCM +if ARCH_BCM config ARCH_BCM_MOBILE bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 @@ -88,4 +87,4 @@ config ARCH_BCM_5301X different SoC or with the older BCM47XX and BCM53XX based network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx -endmenu +endif diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 101e0f356730..2631cfc5ab0d 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,4 +1,4 @@ -config ARCH_BERLIN +menuconfig ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC @@ -9,8 +9,6 @@ config ARCH_BERLIN if ARCH_BERLIN -menu "Marvell Berlin SoC variants" - config MACH_BERLIN_BG2 bool "Marvell Armada 1500 (BG2)" select CACHE_L2X0 @@ -30,6 +28,4 @@ config MACH_BERLIN_BG2Q select HAVE_ARM_TWD if SMP select PINCTRL_BERLIN_BG2Q -endmenu - endif diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 66838f42037f..3c22a1990ecd 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,12 +1,11 @@ -config ARCH_CNS3XXX +menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. -menu "CNS3XXX platform type" - depends on ARCH_CNS3XXX +if ARCH_CNS3XXX config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" @@ -17,4 +16,4 @@ config MACH_CNS3420VB This is a platform with an on-board ARM11 MPCore and has support for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. -endmenu +endif diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index db18ef866593..584e8d4e2892 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -39,7 +39,6 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" select ARCH_DAVINCI_DA8XX - select ARCH_HAS_CPUFREQ select CP_INTC config ARCH_DAVINCI_DA8XX diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d58995c9a95a..8f9b66c4ac78 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,10 +7,9 @@ # Configuration options for the EXYNOS4 -config ARCH_EXYNOS +menuconfig ARCH_EXYNOS bool "Samsung EXYNOS" if ARCH_MULTI_V7 select ARCH_HAS_BANDGAP - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB select ARM_AMBA @@ -30,8 +29,6 @@ config ARCH_EXYNOS if ARCH_EXYNOS -menu "SAMSUNG EXYNOS SoCs Support" - config ARCH_EXYNOS3 bool "SAMSUNG EXYNOS3" select ARM_CPU_SUSPEND if PM @@ -118,8 +115,6 @@ config SOC_EXYNOS5800 default y depends on SOC_EXYNOS5420 -endmenu - config EXYNOS5420_MCPM bool "Exynos5420 Multi-Cluster PM support" depends on MCPM && SOC_EXYNOS5420 diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 16617bdb37a9..1ee91763fa7c 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -118,6 +118,7 @@ extern void __iomem *sysram_ns_base_addr; extern void __iomem *sysram_base_addr; void exynos_init_io(void); void exynos_restart(enum reboot_mode mode, const char *cmd); +void exynos_sysram_init(void); void exynos_cpuidle_init(void); void exynos_cpufreq_init(void); void exynos_init_late(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 90aab4d75d08..f38cf7c110cc 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -184,6 +184,28 @@ void __init exynos_cpufreq_init(void) platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); } +void __iomem *sysram_base_addr; +void __iomem *sysram_ns_base_addr; + +void __init exynos_sysram_init(void) +{ + struct device_node *node; + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { + if (!of_device_is_available(node)) + continue; + sysram_base_addr = of_iomap(node, 0); + break; + } + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { + if (!of_device_is_available(node)) + continue; + sysram_ns_base_addr = of_iomap(node, 0); + break; + } +} + void __init exynos_init_late(void) { if (of_machine_is_compatible("samsung,exynos5440")) @@ -198,7 +220,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, int depth, void *data) { struct map_desc iodesc; - __be32 *reg; + const __be32 *reg; int len; if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && @@ -271,6 +293,13 @@ static void __init exynos_dt_machine_init(void) } } + /* + * This is called from smp_prepare_cpus if we've built for SMP, but + * we still need to set it up for PM and firmware ops if not. + */ + if (!IS_ENABLED(SMP)) + exynos_sysram_init(); + exynos_cpuidle_init(); exynos_cpufreq_init(); diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 69fa48397394..8a134d019cb3 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -46,13 +46,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) if (cpu == 1) exynos_cpu_power_down(cpu); - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); + wfi(); if (pen_release == cpu_logical_map(cpu)) { /* diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 0498d0b887ef..ace0ed617476 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -25,7 +25,6 @@ #define EXYNOS5420_CPUS_PER_CLUSTER 4 #define EXYNOS5420_NR_CLUSTERS 2 -#define MCPM_BOOT_ADDR_OFFSET 0x1c /* * The common v7_exit_coherency_flush API could not be used because of the @@ -343,11 +342,13 @@ static int __init exynos_mcpm_init(void) pr_info("Exynos MCPM support installed\n"); /* - * Future entries into the kernel can now go - * through the cluster entry vectors. + * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr + * as part of secondary_cpu_start(). Let's redirect it to the + * mcpm_entry_point(). */ - __raw_writel(virt_to_phys(mcpm_entry_point), - ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET); + __raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */ + __raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */ + __raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8); iounmap(ns_sram_base_addr); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index ec02422e8499..1c8d31e39520 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -32,28 +32,6 @@ extern void exynos4_secondary_startup(void); -void __iomem *sysram_base_addr; -void __iomem *sysram_ns_base_addr; - -static void __init exynos_smp_prepare_sysram(void) -{ - struct device_node *node; - - for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { - if (!of_device_is_available(node)) - continue; - sysram_base_addr = of_iomap(node, 0); - break; - } - - for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { - if (!of_device_is_available(node)) - continue; - sysram_ns_base_addr = of_iomap(node, 0); - break; - } -} - static inline void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) @@ -234,11 +212,11 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { int i; + exynos_sysram_init(); + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); - exynos_smp_prepare_sysram(); - /* * Write the address of secondary startup into the * system-wide flags register. The boot monitor waits diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 87c0d34c7fba..202ca73e49c4 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -300,7 +300,7 @@ static int exynos_pm_suspend(void) tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_save_register(); return 0; @@ -334,7 +334,7 @@ static void exynos_pm_resume(void) if (exynos_pm_central_resume()) goto early_wakeup; - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_restore_register(); /* For release retention */ @@ -353,7 +353,7 @@ static void exynos_pm_resume(void) s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(S5P_VA_SCU); early_wakeup: @@ -440,15 +440,18 @@ static int exynos_cpu_pm_notifier(struct notifier_block *self, case CPU_PM_ENTER: if (cpu == 0) { exynos_pm_central_suspend(); - exynos_cpu_save_register(); + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) + exynos_cpu_save_register(); } break; case CPU_PM_EXIT: if (cpu == 0) { - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == + ARM_CPU_PART_CORTEX_A9) { scu_enable(S5P_VA_SCU); - exynos_cpu_restore_register(); + exynos_cpu_restore_register(); + } exynos_pm_central_resume(); } break; diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 830b76e70250..a5960e2ac090 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,7 +1,6 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8d42eab76d53..28fa2fa49e5d 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,6 +1,5 @@ -config ARCH_MXC +menuconfig ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM @@ -13,8 +12,7 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors -menu "Freescale i.MX support" - depends on ARCH_MXC +if ARCH_MXC config MXC_TZIC bool @@ -99,7 +97,6 @@ config SOC_IMX25 config SOC_IMX27 bool - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 @@ -124,7 +121,6 @@ config SOC_IMX35 config SOC_IMX5 bool - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 select MXC_TZIC @@ -786,4 +782,4 @@ endif source "arch/arm/mach-imx/devices/Kconfig" -endmenu +endif diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index ba43321001d8..64f8e2564a37 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -28,7 +28,7 @@ config ARCH_CINTEGRATOR bool config INTEGRATOR_IMPD1 - tristate "Include support for Integrator/IM-PD1" + bool "Include support for Integrator/IM-PD1" depends on ARCH_INTEGRATOR_AP select ARCH_REQUIRE_GPIOLIB select ARM_VIC diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 0e870ea818c4..3ce880729cff 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -308,7 +308,12 @@ static struct impd1_device impd1_devs[] = { */ #define IMPD1_VALID_IRQS 0x00000bffU -static int __init impd1_probe(struct lm_device *dev) +/* + * As this module is bool, it is OK to have this as __init_refok() - no + * probe calls will be done after the initial system bootup, as devices + * are discovered as part of the machine startup. + */ +static int __init_refok impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; int irq_base; @@ -397,6 +402,11 @@ static void impd1_remove(struct lm_device *dev) static struct lm_driver impd1_driver = { .drv = { .name = "impd1", + /* + * As we're dropping the probe() function, suppress driver + * binding from sysfs. + */ + .suppress_bind_attrs = true, }, .probe = impd1_probe, .remove = impd1_remove, diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index f50bc936cb84..98a156afaa94 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -1,6 +1,7 @@ config ARCH_KEYSTONE bool "Texas Instruments Keystone Devices" depends on ARCH_MULTI_V7 + depends on ARM_PATCH_PHYS_VIRT select ARM_GIC select HAVE_ARM_ARCH_TIMER select CLKSRC_MMIO diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 82a4ba8578a2..f49328c39bef 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MOXART +menuconfig ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 6090b9eb00c8..4a7c250c9a30 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MVEBU +menuconfig ARCH_MVEBU bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO @@ -13,8 +13,6 @@ config ARCH_MVEBU if ARCH_MVEBU -menu "Marvell EBU SoC variants" - config MACH_MVEBU_V7 bool select ARMADA_370_XP_TIMER @@ -84,7 +82,6 @@ config MACH_DOVE config MACH_KIRKWOOD bool "Marvell Kirkwood boards" if ARCH_MULTI_V5 - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select KIRKWOOD_CLK @@ -97,6 +94,4 @@ config MACH_KIRKWOOD Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -endmenu - endif diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 486d301f43fd..3c61096c8627 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -1,4 +1,4 @@ -config ARCH_NOMADIK +menuconfig ARCH_NOMADIK bool "ST-Ericsson Nomadik" depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB @@ -15,7 +15,6 @@ config ARCH_NOMADIK Support for the Nomadik platform by ST-Ericsson if ARCH_NOMADIK -menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" @@ -24,7 +23,6 @@ config MACH_NOMADIK_8815NHK select I2C_ALGOBIT select I2C_NOMADIK -endmenu endif config NOMADIK_8815 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0ba482638ebf..062505345c95 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -1,3 +1,6 @@ +menu "TI OMAP/AM/DM/DRA Family" + depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 + config ARCH_OMAP bool @@ -28,7 +31,6 @@ config ARCH_OMAP4 select ARM_CPU_SUSPEND if PM select ARM_ERRATA_720789 select ARM_GIC - select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select OMAP_INTERCONNECT @@ -80,7 +82,6 @@ config SOC_DRA7XX config ARCH_OMAP2PLUS bool select ARCH_HAS_BANDGAP - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB @@ -343,3 +344,5 @@ config OMAP4_ERRATA_I688 endmenu endif + +endmenu diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index ff029737c8f0..a373d508799a 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -91,7 +91,14 @@ extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); +#ifdef CONFIG_CACHE_L2X0 int omap_l2_cache_init(void); +#else +static inline int omap_l2_cache_init(void) +{ + return 0; +} +#endif extern void omap5_realtime_timer_init(void); void omap2420_init_early(void); diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index e4e505f52ba0..042f693ef423 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,4 +1,4 @@ -config ARCH_SIRF +menuconfig ARCH_SIRF bool "CSR SiRF" if ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB @@ -11,7 +11,7 @@ config ARCH_SIRF if ARCH_SIRF -menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" +comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" config ARCH_ATLAS6 bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" @@ -37,8 +37,6 @@ config ARCH_MARCO help Support for CSR SiRFSoC ARM Cortex A9 Platform -endmenu - config SIRF_IRQ bool diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index fd2b99dceb89..ee5697ba05bc 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -1,4 +1,4 @@ -config ARCH_QCOM +menuconfig ARCH_QCOM bool "Qualcomm Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC @@ -11,8 +11,6 @@ config ARCH_QCOM if ARCH_QCOM -menu "Qualcomm SoC Selection" - config ARCH_MSM8X60 bool "Enable support for MSM8X60" select CLKSRC_QCOM @@ -25,8 +23,6 @@ config ARCH_MSM8974 bool "Enable support for MSM8974" select HAVE_ARM_ARCH_TIMER -endmenu - config QCOM_SCM bool diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 04284de7aca5..ad5316ae524e 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -117,7 +117,7 @@ config S3C24XX_SETUP_TS Compile in platform device definition for Samsung TouchScreen. config S3C24XX_DMA - bool "S3C2410 DMA support" + bool "S3C2410 DMA support (deprecated)" select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 3136d86b0d6e..26ca2427e53d 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -18,9 +18,9 @@ config CPU_S3C6410 Enable S3C6410 CPU support config S3C64XX_PL080 - bool "S3C64XX DMA using generic PL08x driver" + def_bool DMADEVICES + select ARM_AMBA select AMBA_PL08X - select SAMSUNG_DMADEV config S3C64XX_SETUP_SDHCI bool diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index bb2111b3751e..26003e23796d 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,16 +9,18 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_SLEEP if PM - select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM help Enable S5P6440 CPU support config CPU_S5P6450 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_SLEEP if PM - select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM help Enable S5P6450 CPU support diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 15170be97a74..c5e3a969b063 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -9,8 +9,9 @@ if ARCH_S5PC100 config CPU_S5PC100 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_EXT_INT - select SAMSUNG_DMADEV help Enable S5PC100 CPU support diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 8c3abe521757..f60f2862856d 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,10 +11,11 @@ if ARCH_S5PV210 config CPU_S5PV210 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_EXT_INT select S5P_PM if PM select S5P_SLEEP if PM - select SAMSUNG_DMADEV help Enable S5PV210 CPU support diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index dbd954e61aa7..798073057e51 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -1,7 +1,7 @@ config ARCH_SHMOBILE bool -config ARCH_SHMOBILE_MULTI +menuconfig ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU select ARCH_SHMOBILE @@ -15,7 +15,7 @@ config ARCH_SHMOBILE_MULTI if ARCH_SHMOBILE_MULTI -comment "Renesas ARM SoCs System Type" +#comment "Renesas ARM SoCs System Type" config ARCH_EMEV2 bool "Emma Mobile EV2" @@ -85,7 +85,6 @@ config ARCH_R8A73A4 select CPU_V7 select SH_CLK_CPG select RENESAS_IRQC - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -264,7 +263,6 @@ config MACH_KOELSCH config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 0786249b2832..90df2022276a 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -14,7 +14,6 @@ if PLAT_SPEAR config ARCH_SPEAR13XX bool "ST SPEAr13xx" depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE - select ARCH_HAS_CPUFREQ select ARM_GIC select GPIO_SPEAR_SPICS select HAVE_ARM_SCU if SMP diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index abf9ee9bbc3f..7e33e9d2c42e 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,5 +1,5 @@ menuconfig ARCH_STI - bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 + bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7 select ARM_GIC select ARM_GLOBAL_TIMER select PINCTRL diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index e16999e5b735..095399618ca5 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,6 +1,5 @@ -config ARCH_TEGRA +menuconfig ARCH_TEGRA bool "NVIDIA Tegra" if ARCH_MULTI_V7 - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_GIC @@ -16,8 +15,7 @@ config ARCH_TEGRA help This enables support for NVIDIA Tegra based systems. -menu "NVIDIA Tegra options" - depends on ARCH_TEGRA +if ARCH_TEGRA config ARCH_TEGRA_2x_SOC bool "Enable support for Tegra20 family" @@ -69,4 +67,4 @@ config TEGRA_AHB which controls AHB bus master arbitration and some performance parameters(priority, prefech size). -endmenu +endif diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index e3a96d7302e9..bc51a71394af 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,4 +1,4 @@ -config ARCH_U300 +menuconfig ARCH_U300 bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 depends on MMU select ARCH_REQUIRE_GPIOLIB @@ -16,8 +16,6 @@ config ARCH_U300 if ARCH_U300 -menu "ST-Ericsson AB U300/U335 Platform" - config MACH_U300 depends on ARCH_U300 bool "U300" @@ -43,6 +41,4 @@ config MACH_U300_SPIDUMMY you don't need it. Selecting this will activate the SPI framework and ARM PL022 support. -endmenu - endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index b41a42da1505..5be7c4583a93 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,9 +1,8 @@ -config ARCH_U8500 +menuconfig ARCH_U8500 bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 depends on MMU select AB8500_CORE select ABX500_CORE - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_ERRATA_754322 @@ -34,8 +33,6 @@ config UX500_SOC_DB8500 select REGULATOR select REGULATOR_DB8500_PRCMU -menu "Ux500 target platform (boards)" - config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C @@ -68,8 +65,6 @@ config UX500_AUTO_PLATFORM a working kernel. If everything else is disabled, this automatically enables MACH_MOP500. -endmenu - config UX500_DEBUG_UART int "Ux500 UART to use for low-level debug" default 2 diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 90249cfc37b3..99c1f151c403 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,4 +1,4 @@ -config ARCH_VEXPRESS +menuconfig ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN @@ -37,8 +37,7 @@ config ARCH_VEXPRESS platforms. The traditional (ATAGs) boot method is not usable on these boards with this option. -menu "Versatile Express platform type" - depends on ARCH_VEXPRESS +if ARCH_VEXPRESS config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA bool "Enable A5 and A9 only errata work-arounds" @@ -65,7 +64,6 @@ config ARCH_VEXPRESS_DCSCB config ARCH_VEXPRESS_SPC bool "Versatile Express Serial Power Controller (SPC)" - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select PM_OPP help @@ -83,4 +81,4 @@ config ARCH_VEXPRESS_TC2_PM Support for CPU and cluster power management on Versatile Express with a TC2 (A15x2 A7x3) big.LITTLE core tile. -endmenu +endif diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index 08f56a41cb55..aaaa24fe4d71 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -1,6 +1,5 @@ config ARCH_VT8500 bool - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select VT8500_TIMER diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 573e0db1d0f0..0c164f81e72d 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,6 +1,5 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 243dfcb2ca0e..301b892d97d9 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -35,27 +35,15 @@ config SAMSUNG_PM Base platform power management code for samsung code if PLAT_SAMSUNG +menu "Samsung Common options" # boot configurations comment "Boot options" -config S3C_BOOT_ERROR_RESET - bool "S3C Reboot on decompression error" - help - Say y here to use the watchdog to reset the system if the - kernel decompressor detects an error during decompression. - -config S3C_BOOT_UART_FORCE_FIFO - bool "Force UART FIFO on during boot process" - default y - help - Say Y here to force the UART FIFOs on during the kernel - uncompressor - - config S3C_LOWLEVEL_UART_PORT int "S3C UART to use for low-level messages" + depends on ARCH_S3C64XX default 0 help Choice of which UART port to use for the low-level messages, @@ -407,17 +395,16 @@ config SAMSUNG_PM_GPIO Include legacy GPIO power management code for platforms not using pinctrl-samsung driver. -endif - config SAMSUNG_DMADEV - bool - select ARM_AMBA + bool "Use legacy Samsung DMA abstraction" + depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S5P64X0 || ARCH_S3C64XX select DMADEVICES - select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \ - CPU_S5P6450 || CPU_S5P6440) + default y help Use DMA device engine for PL330 DMAC. +endif + config S5P_DEV_MFC bool help @@ -503,4 +490,5 @@ config DEBUG_S3C_UART default "2" if DEBUG_S3C_UART2 default "3" if DEBUG_S3C_UART3 +endmenu endif diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index a118ec1650fa..1f37d9870e7a 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -45,7 +45,7 @@ config OMAP_INTERCONNECT config ARM_CCI bool "ARM CCI driver support" - depends on ARM + depends on ARM && OF && CPU_V7 help Driver supporting the CCI cache coherent interconnect for ARM platforms. diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 8d6420013a04..f71d55f5e6e5 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -153,13 +153,10 @@ static void exynos4_mct_write(unsigned int value, unsigned long offset) } /* Clocksource handling */ -static void exynos4_mct_frc_start(u32 hi, u32 lo) +static void exynos4_mct_frc_start(void) { u32 reg; - exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L); - exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U); - reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); reg |= MCT_G_TCON_START; exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); @@ -181,7 +178,7 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) static void exynos4_frc_resume(struct clocksource *cs) { - exynos4_mct_frc_start(0, 0); + exynos4_mct_frc_start(); } struct clocksource mct_frc = { @@ -200,7 +197,7 @@ static u64 notrace exynos4_read_sched_clock(void) static void __init exynos4_clocksource_init(void) { - exynos4_mct_frc_start(0, 0); + exynos4_mct_frc_start(); if (clocksource_register_hz(&mct_frc, clk_rate)) panic("%s: can't register clocksource\n", mct_frc.name); diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c index 73068e50e56d..3250fc1df0aa 100644 --- a/drivers/misc/vexpress-syscfg.c +++ b/drivers/misc/vexpress-syscfg.c @@ -199,7 +199,7 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev, func = kzalloc(sizeof(*func) + sizeof(*func->template) * num, GFP_KERNEL); if (!func) - return NULL; + return ERR_PTR(-ENOMEM); func->syscfg = syscfg; func->num_templates = num; @@ -231,10 +231,14 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev, func->regmap = regmap_init(dev, NULL, func, &vexpress_syscfg_regmap_config); - if (IS_ERR(func->regmap)) + if (IS_ERR(func->regmap)) { + void *err = func->regmap; + kfree(func); - else - list_add(&func->list, &syscfg->funcs); + return err; + } + + list_add(&func->list, &syscfg->funcs); return func->regmap; } diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index ce1743d0b679..5e343bab9458 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -44,7 +44,7 @@ config STE_MODEM_RPROC config DA8XX_REMOTEPROC tristate "DA8xx/OMAP-L13x remoteproc support" depends on ARCH_DAVINCI_DA8XX - select CMA + select CMA if MMU select REMOTEPROC select RPMSG help diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 778e376f197e..24f3cdce527d 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -991,7 +991,7 @@ static const struct of_device_id msm_uartdm_table[] = { { } }; -static int __init msm_serial_probe(struct platform_device *pdev) +static int msm_serial_probe(struct platform_device *pdev) { struct msm_port *msm_port; struct resource *resource; diff --git a/include/dt-bindings/clock/stih415-clks.h b/include/dt-bindings/clock/stih415-clks.h index 0d2c7397e028..d80caa68aebd 100644 --- a/include/dt-bindings/clock/stih415-clks.h +++ b/include/dt-bindings/clock/stih415-clks.h @@ -10,6 +10,7 @@ #define CLK_ETH1_PHY 4 /* CLOCKGEN A1 */ +#define CLK_ICN_IF_2 0 #define CLK_GMAC0_PHY 3 #endif diff --git a/include/dt-bindings/clock/stih416-clks.h b/include/dt-bindings/clock/stih416-clks.h index 552c779eb6af..f9bdbd13568d 100644 --- a/include/dt-bindings/clock/stih416-clks.h +++ b/include/dt-bindings/clock/stih416-clks.h @@ -10,6 +10,7 @@ #define CLK_ETH1_PHY 4 /* CLOCKGEN A1 */ +#define CLK_ICN_IF_2 0 #define CLK_GMAC0_PHY 3 #endif |