summary refs log tree commit diff
diff options
context:
space:
mode:
-rw-r--r--Documentation/scsi/ncr53c8xx.txt25
-rw-r--r--Documentation/scsi/tmscsim.txt4
-rw-r--r--arch/mips/loongson/loongson-3/hpet.c2
-rw-r--r--drivers/block/cpqarray.c4
-rw-r--r--drivers/bus/omap_l3_noc.c4
-rw-r--r--drivers/bus/omap_l3_smx.c10
-rw-r--r--drivers/mtd/nand/hisi504_nand.c3
-rw-r--r--drivers/usb/isp1760/isp1760-core.c3
-rw-r--r--drivers/usb/isp1760/isp1760-udc.c4
-rw-r--r--include/linux/interrupt.h3
10 files changed, 13 insertions, 49 deletions
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 1d508dcbf859..8586efff1e99 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -786,7 +786,6 @@ port address 0x1400.
         irqm:1     same as initial settings (assumed BIOS settings)
         irqm:2     always totem pole
         irqm:0x10  driver will not use IRQF_SHARED flag when requesting irq
-        irqm:0x20  driver will not use IRQF_DISABLED flag when requesting irq
 
     (Bits 0x10 and 0x20 can be combined with hardware irq mode option)
 
@@ -1231,30 +1230,6 @@ they only refer to system buffers that are well aligned. So, a work around
 may only be needed under Linux when a scatter/gather list is not used and 
 when the SCSI DATA IN phase is reentered after a phase mismatch.
 
-14.5 IRQ sharing problems
-
-When an IRQ is shared by devices that are handled by different drivers, it 
-may happen that one driver complains about the request of the IRQ having 
-failed. Inder Linux-2.0, this may be due to one driver having requested the 
-IRQ using the IRQF_DISABLED flag but some other having requested the same IRQ
-without this flag. Under both Linux-2.0 and linux-2.2, this may be caused by 
-one driver not having requested the IRQ with the IRQF_SHARED flag.
-
-By default, the ncr53c8xx and sym53c8xx drivers request IRQs with both the 
-IRQF_DISABLED and the IRQF_SHARED flag under Linux-2.0 and with only the IRQF_SHARED
-flag under Linux-2.2.
-
-Under Linux-2.0, you can disable use of IRQF_DISABLED flag from the boot
-command line by using the following option:
-
-     ncr53c8xx=irqm:0x20   (for the generic ncr53c8xx driver)
-     sym53c8xx=irqm:0x20   (for the sym53c8xx driver)
-
-If this does not fix the problem, then you may want to check how all other 
-drivers are requesting the IRQ and report the problem. Note that if at least 
-a single driver does not request the IRQ with the IRQF_SHARED flag (share IRQ),
-then the request of the IRQ obviously will not succeed for all the drivers.
-
 15. SCSI problem troubleshooting
 
 15.1 Problem tracking
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
index 0810132772a8..0e0322bf0020 100644
--- a/Documentation/scsi/tmscsim.txt
+++ b/Documentation/scsi/tmscsim.txt
@@ -107,10 +107,6 @@ produced errors and started to corrupt my disks. So don't do that! A 37.50
 MHz PCI bus works for me, though, but I don't recommend using higher clocks
 than the 33.33 MHz being in the PCI spec.
 
-If you want to share the IRQ with another device and the driver refuses to
-do so, you might succeed with changing the DC390_IRQ type in tmscsim.c to 
-IRQF_SHARED | IRQF_DISABLED.
-
 
 3.Features
 ----------
diff --git a/arch/mips/loongson/loongson-3/hpet.c b/arch/mips/loongson/loongson-3/hpet.c
index e898d68668a9..5c21cd3bd339 100644
--- a/arch/mips/loongson/loongson-3/hpet.c
+++ b/arch/mips/loongson/loongson-3/hpet.c
@@ -162,7 +162,7 @@ static irqreturn_t hpet_irq_handler(int irq, void *data)
 
 static struct irqaction hpet_irq = {
 	.handler = hpet_irq_handler,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
+	.flags = IRQF_NOBALANCING | IRQF_TIMER,
 	.name = "hpet",
 };
 
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 2b9440384536..f749df9e15cd 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -405,8 +405,8 @@ static int cpqarray_register_ctlr(int i, struct pci_dev *pdev)
 		goto Enomem4;
 	}
 	hba[i]->access.set_intr_mask(hba[i], 0);
-	if (request_irq(hba[i]->intr, do_ida_intr,
-		IRQF_DISABLED|IRQF_SHARED, hba[i]->devname, hba[i]))
+	if (request_irq(hba[i]->intr, do_ida_intr, IRQF_SHARED,
+			hba[i]->devname, hba[i]))
 	{
 		printk(KERN_ERR "cpqarray: Unable to get irq %d for %s\n",
 				hba[i]->intr, hba[i]->devname);
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 029bc73de001..11f7982cbdb3 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -284,7 +284,7 @@ static int omap_l3_probe(struct platform_device *pdev)
 	 */
 	l3->debug_irq = platform_get_irq(pdev, 0);
 	ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler,
-			       IRQF_DISABLED, "l3-dbg-irq", l3);
+			       0x0, "l3-dbg-irq", l3);
 	if (ret) {
 		dev_err(l3->dev, "request_irq failed for %d\n",
 			l3->debug_irq);
@@ -293,7 +293,7 @@ static int omap_l3_probe(struct platform_device *pdev)
 
 	l3->app_irq = platform_get_irq(pdev, 1);
 	ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler,
-			       IRQF_DISABLED, "l3-app-irq", l3);
+			       0x0, "l3-app-irq", l3);
 	if (ret)
 		dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq);
 
diff --git a/drivers/bus/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c
index 597fdaee7315..360a5c0a4ee0 100644
--- a/drivers/bus/omap_l3_smx.c
+++ b/drivers/bus/omap_l3_smx.c
@@ -251,18 +251,16 @@ static int omap3_l3_probe(struct platform_device *pdev)
 	}
 
 	l3->debug_irq = platform_get_irq(pdev, 0);
-	ret = request_irq(l3->debug_irq, omap3_l3_app_irq,
-		IRQF_DISABLED | IRQF_TRIGGER_RISING,
-		"l3-debug-irq", l3);
+	ret = request_irq(l3->debug_irq, omap3_l3_app_irq, IRQF_TRIGGER_RISING,
+			  "l3-debug-irq", l3);
 	if (ret) {
 		dev_err(&pdev->dev, "couldn't request debug irq\n");
 		goto err1;
 	}
 
 	l3->app_irq = platform_get_irq(pdev, 1);
-	ret = request_irq(l3->app_irq, omap3_l3_app_irq,
-		IRQF_DISABLED | IRQF_TRIGGER_RISING,
-		"l3-app-irq", l3);
+	ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_TRIGGER_RISING,
+			  "l3-app-irq", l3);
 	if (ret) {
 		dev_err(&pdev->dev, "couldn't request app irq\n");
 		goto err2;
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
index 289ad3ac3e80..8dcc7b8fee40 100644
--- a/drivers/mtd/nand/hisi504_nand.c
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -758,8 +758,7 @@ static int hisi_nfc_probe(struct platform_device *pdev)
 
 	hisi_nfc_host_init(host);
 
-	ret = devm_request_irq(dev, irq, hinfc_irq_handle, IRQF_DISABLED,
-				"nandc", host);
+	ret = devm_request_irq(dev, irq, hinfc_irq_handle, 0x0, "nandc", host);
 	if (ret) {
 		dev_err(dev, "failed to request IRQ\n");
 		goto err_res;
diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c
index b9827556455f..5c37f40f6122 100644
--- a/drivers/usb/isp1760/isp1760-core.c
+++ b/drivers/usb/isp1760/isp1760-core.c
@@ -151,8 +151,7 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
 	}
 
 	if (IS_ENABLED(CONFIG_USB_ISP1761_UDC) && !udc_disabled) {
-		ret = isp1760_udc_register(isp, irq, irqflags | IRQF_SHARED |
-					   IRQF_DISABLED);
+		ret = isp1760_udc_register(isp, irq, irqflags | IRQF_SHARED);
 		if (ret < 0) {
 			isp1760_hcd_unregister(&isp->hcd);
 			return ret;
diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index 9612d7990565..0b46ff01299f 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1451,8 +1451,8 @@ int isp1760_udc_register(struct isp1760_device *isp, int irq,
 
 	sprintf(udc->irqname, "%s (udc)", devname);
 
-	ret = request_irq(irq, isp1760_udc_irq, IRQF_SHARED | IRQF_DISABLED |
-			  irqflags, udc->irqname, udc);
+	ret = request_irq(irq, isp1760_udc_irq, IRQF_SHARED | irqflags,
+			  udc->irqname, udc);
 	if (ret < 0)
 		goto error;
 
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 3bb01b9a379c..2cee1761c77d 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -39,8 +39,6 @@
  * These flags used only by the kernel as part of the
  * irq handling routines.
  *
- * IRQF_DISABLED - keep irqs disabled when calling the action handler.
- *                 DEPRECATED. This flag is a NOOP and scheduled to be removed
  * IRQF_SHARED - allow sharing the irq among several devices
  * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
  * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
@@ -58,7 +56,6 @@
  * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
  *                resume time.
  */
-#define IRQF_DISABLED		0x00000020
 #define IRQF_SHARED		0x00000080
 #define IRQF_PROBE_SHARED	0x00000100
 #define __IRQF_TIMER		0x00000200