summary refs log tree commit diff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arc/Kconfig1
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig2
-rw-r--r--drivers/misc/mic/Kconfig2
-rw-r--r--drivers/staging/android/Kconfig2
-rw-r--r--drivers/staging/bcm/Kconfig1
-rw-r--r--drivers/staging/frontier/Kconfig1
-rw-r--r--drivers/staging/media/go7007/Kconfig3
-rw-r--r--drivers/staging/rtl8187se/Kconfig1
-rw-r--r--drivers/staging/rtl8188eu/Kconfig1
-rw-r--r--drivers/staging/rtl8192e/rtl8192e/Kconfig1
-rw-r--r--drivers/staging/rtl8192u/Kconfig1
-rw-r--r--drivers/staging/rtl8712/Kconfig2
-rw-r--r--drivers/staging/usbip/Kconfig4
-rw-r--r--drivers/usb/core/Kconfig1
-rw-r--r--drivers/usb/host/Kconfig3
15 files changed, 0 insertions, 26 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 9063ae6553cc..3d7f1137a21b 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -356,7 +356,6 @@ config ARC_CURR_IN_REG
 
 config ARC_MISALIGN_ACCESS
 	bool "Emulate unaligned memory access (userspace only)"
-	default N
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	help
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 6792503aaf79..15a9ed1d579c 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -11,7 +11,6 @@ config ETRAX_ETHERNET
 config ETRAX_NO_PHY
 	bool "PHY not present"
 	depends on ETRAX_ETHERNET
-	default N
 	help
 	  This option disables all MDIO communication with an ethernet
 	  transceiver connected to the MII interface. This option shall
@@ -116,7 +115,6 @@ config ETRAX_AXISFLASHMAP
 config ETRAX_AXISFLASHMAP_MTD0WHOLE
 	bool "MTD0 is whole boot flash device"
 	depends on ETRAX_AXISFLASHMAP
-	default N
 	help
 	  When this option is not set, mtd0 refers to the first partition
 	  on the boot flash device. When set, mtd0 refers to the whole
diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
index e42b331edbc6..462a5b1d8651 100644
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@@ -4,7 +4,6 @@ config INTEL_MIC_HOST
 	tristate "Intel MIC Host Driver"
 	depends on 64BIT && PCI && X86
 	select VHOST_RING
-	default N
 	help
 	  This enables Host Driver support for the Intel Many Integrated
 	  Core (MIC) family of PCIe form factor coprocessor devices that
@@ -25,7 +24,6 @@ config INTEL_MIC_CARD
 	tristate "Intel MIC Card Driver"
 	depends on 64BIT && X86
 	select VIRTIO
-	default N
 	help
 	  This enables card driver support for the Intel Many Integrated
 	  Core (MIC) device family. The card driver communicates shutdown/
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index 1e9ab6dfc90d..22cf17dcb7da 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -2,7 +2,6 @@ menu "Android"
 
 config ANDROID
 	bool "Android Drivers"
-	default N
 	---help---
 	  Enable support for various drivers needed on the Android platform
 
@@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO
 
 config ANDROID_LOW_MEMORY_KILLER
 	bool "Android Low Memory Killer"
-	default N
 	---help---
 	  Registers processes to be killed when memory is low
 
diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig
index 83c9752504d4..8acf4b24a7c9 100644
--- a/drivers/staging/bcm/Kconfig
+++ b/drivers/staging/bcm/Kconfig
@@ -1,7 +1,6 @@
 config BCM_WIMAX
        tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support"
        depends on USB && NET
-       default N
        help
          This is an experimental driver for the Beceem WIMAX chipset used
 	 by Sprint 4G.
diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig
index 7121853bd397..4da290b2f5bd 100644
--- a/drivers/staging/frontier/Kconfig
+++ b/drivers/staging/frontier/Kconfig
@@ -1,6 +1,5 @@
 config TRANZPORT
 	tristate "Frontier Tranzport and Alphatrack support"
 	depends on USB
-	default N
 	---help---
 	  Enable support for the Frontier Tranzport and Alphatrack devices.
diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig
index 04bd0fba7b1f..95a3af644a92 100644
--- a/drivers/staging/media/go7007/Kconfig
+++ b/drivers/staging/media/go7007/Kconfig
@@ -13,7 +13,6 @@ config VIDEO_GO7007
 	select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
-	default N
 	---help---
 	  This is a video4linux driver for the WIS GO7007 MPEG
 	  encoder chip.
@@ -24,7 +23,6 @@ config VIDEO_GO7007
 config VIDEO_GO7007_USB
 	tristate "WIS GO7007 USB support"
 	depends on VIDEO_GO7007 && USB
-	default N
 	---help---
 	  This is a video4linux driver for the WIS GO7007 MPEG
 	  encoder chip over USB.
@@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER
 config VIDEO_GO7007_USB_S2250_BOARD
 	tristate "Sensoray 2250/2251 support"
 	depends on VIDEO_GO7007_USB && USB
-	default N
 	---help---
 	  This is a video4linux driver for the Sensoray 2250/2251 device.
 
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 3162aabbeb07..ff8d41ebca36 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -6,6 +6,5 @@ config R8187SE
 	select WEXT_PRIV
 	select EEPROM_93CX6
 	select CRYPTO
-	default N
 	---help---
 	  If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
index c9c548f17494..70fecfabc0c7 100644
--- a/drivers/staging/rtl8188eu/Kconfig
+++ b/drivers/staging/rtl8188eu/Kconfig
@@ -3,7 +3,6 @@ config R8188EU
 	depends on WLAN && USB
 	select WIRELESS_EXT
 	select WEXT_PRIV
-	default N
 	---help---
 	This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
 	If built as a module, it will be called r8188eu.
diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig
index 50e0d91a409a..ad82bc348a75 100644
--- a/drivers/staging/rtl8192e/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig
@@ -5,5 +5,4 @@ config RTL8192E
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select CRYPTO
-	default N
 	---help---
diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig
index 3f055091b35f..3ee9d0d00fb6 100644
--- a/drivers/staging/rtl8192u/Kconfig
+++ b/drivers/staging/rtl8192u/Kconfig
@@ -5,5 +5,4 @@ config RTL8192U
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select CRYPTO
-	default N
 	---help---
diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
index 6a43312380e0..f160eee52f09 100644
--- a/drivers/staging/rtl8712/Kconfig
+++ b/drivers/staging/rtl8712/Kconfig
@@ -4,7 +4,6 @@ config R8712U
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select FW_LOADER
-	default N
 	---help---
 	This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
 	If built as a module, it will be called r8712u.
@@ -12,7 +11,6 @@ config R8712U
 config R8712_TX_AGGR
 	bool "Realtek RTL8712U Transmit Aggregation code"
 	depends on R8712U && BROKEN
-	default N
 	---help---
 	This option provides transmit aggregation for the Realtek RTL8712 USB device.
 
diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig
index 886000980474..bd99e9e47e50 100644
--- a/drivers/staging/usbip/Kconfig
+++ b/drivers/staging/usbip/Kconfig
@@ -1,7 +1,6 @@
 config USBIP_CORE
 	tristate "USB/IP support"
 	depends on USB && NET
-	default N
 	---help---
 	  This enables pushing USB packets over IP to allow remote
 	  machines direct access to USB devices. It provides the
@@ -18,7 +17,6 @@ config USBIP_CORE
 config USBIP_VHCI_HCD
 	tristate "VHCI hcd"
 	depends on USBIP_CORE
-	default N
 	---help---
 	  This enables the USB/IP virtual host controller driver,
 	  which is run on the remote machine.
@@ -29,7 +27,6 @@ config USBIP_VHCI_HCD
 config USBIP_HOST
 	tristate "Host driver"
 	depends on USBIP_CORE
-	default N
 	---help---
 	  This enables the USB/IP host driver, which is run on the
 	  machine that is sharing the USB devices.
@@ -40,6 +37,5 @@ config USBIP_HOST
 config USBIP_DEBUG
 	bool "Debug messages for USB/IP"
 	depends on USBIP_CORE
-	default N
 	---help---
 	  This enables the debug messages from the USB/IP drivers.
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index fed7f68d025d..cb8e99156f5a 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -10,7 +10,6 @@ config USB_DEBUG
 
 config USB_ANNOUNCE_NEW_DEVICES
 	bool "USB announce new devices"
-	default N
 	help
 	  Say Y here if you want the USB core to always announce the
 	  idVendor, idProduct, Manufacturer, Product, and SerialNumber
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a9707da7da0b..c8b4161613cf 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -314,7 +314,6 @@ config USB_ISP1760_HCD
 
 config USB_ISP1362_HCD
 	tristate "ISP1362 HCD support"
-	default N
 	---help---
 	  Supports the Philips ISP1362 chip as a host controller
 
@@ -326,7 +325,6 @@ config USB_ISP1362_HCD
 config USB_FUSBH200_HCD
 	tristate "FUSBH200 HCD support"
 	depends on USB
-	default N
 	---help---
 	Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
 	with minor modification.
@@ -337,7 +335,6 @@ config USB_FUSBH200_HCD
 config USB_FOTG210_HCD
 	tristate "FOTG210 HCD support"
 	depends on USB
-	default N
 	---help---
 	  Faraday FOTG210 is an OTG controller which can be configured as
 	  an USB2.0 host. It is designed to meet USB2.0 EHCI specification
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-09-23 00:17:06 +0000