diff options
| -rw-r--r-- | drivers/char/ipmi/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_msghandler.c | 4 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 73 | ||||
| -rw-r--r-- | include/linux/ipmi.h | 2 |
4 files changed, 3 insertions, 88 deletions
diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig index 6ed9e9fe5233..5a9350b1069a 100644 --- a/drivers/char/ipmi/Kconfig +++ b/drivers/char/ipmi/Kconfig @@ -50,18 +50,6 @@ config IPMI_SI Currently, only KCS and SMIC are supported. If you are using IPMI, you should probably say "y" here. -config IPMI_SI_PROBE_DEFAULTS - bool 'Probe for all possible IPMI system interfaces by default' - default n - depends on IPMI_SI - help - Modern systems will usually expose IPMI interfaces via a discoverable - firmware mechanism such as ACPI or DMI. Older systems do not, and so - the driver is forced to probe hardware manually. This may cause boot - delays. Say "n" here to disable this manual probing. IPMI will then - only be available on older systems if the "ipmi_si_intf.trydefaults=1" - boot argument is passed. - config IPMI_SSIF tristate 'IPMI SMBus handler (SSIF)' select I2C diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 44b1bd6baa38..d8619998cfb5 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -474,12 +474,12 @@ static DEFINE_MUTEX(smi_watchers_mutex); static const char * const addr_src_to_str[] = { "invalid", "hotmod", "hardcoded", "SPMI", "ACPI", "SMBIOS", "PCI", - "device-tree", "default" + "device-tree" }; const char *ipmi_addr_src_to_str(enum ipmi_addr_src src) { - if (src > SI_DEFAULT) + if (src >= SI_LAST) src = 0; /* Invalid */ return addr_src_to_str[src]; } diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 7b1c412b40a2..a112c0146012 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1322,7 +1322,6 @@ static bool si_tryplatform = true; #ifdef CONFIG_PCI static bool si_trypci = true; #endif -static bool si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS); static char *si_type[SI_MAX_PARMS]; #define MAX_SI_TYPE_STR 30 static char si_type_str[MAX_SI_TYPE_STR]; @@ -1371,10 +1370,6 @@ module_param_named(trypci, si_trypci, bool, 0); MODULE_PARM_DESC(trypci, "Setting this to zero will disable the" " default scan of the interfaces identified via pci"); #endif -module_param_named(trydefaults, si_trydefaults, bool, 0); -MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the" - " default scan of the KCS and SMIC interface at the standard" - " address"); module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0); MODULE_PARM_DESC(type, "Defines the type of each interface, each" " interface separated by commas. The types are 'kcs'," @@ -3461,62 +3456,6 @@ static inline void wait_for_timer_and_thread(struct smi_info *smi_info) del_timer_sync(&smi_info->si_timer); } -static const struct ipmi_default_vals -{ - const int type; - const int port; -} ipmi_defaults[] = -{ - { .type = SI_KCS, .port = 0xca2 }, - { .type = SI_SMIC, .port = 0xca9 }, - { .type = SI_BT, .port = 0xe4 }, - { .port = 0 } -}; - -static void default_find_bmc(void) -{ - struct smi_info *info; - int i; - - for (i = 0; ; i++) { - if (!ipmi_defaults[i].port) - break; -#ifdef CONFIG_PPC - if (check_legacy_ioport(ipmi_defaults[i].port)) - continue; -#endif - info = smi_info_alloc(); - if (!info) - return; - - info->addr_source = SI_DEFAULT; - - info->si_type = ipmi_defaults[i].type; - info->io_setup = port_setup; - info->io.addr_data = ipmi_defaults[i].port; - info->io.addr_type = IPMI_IO_ADDR_SPACE; - - info->io.addr = NULL; - info->io.regspacing = DEFAULT_REGSPACING; - info->io.regsize = DEFAULT_REGSPACING; - info->io.regshift = 0; - - if (add_smi(info) == 0) { - if ((try_smi_init(info)) == 0) { - /* Found one... */ - printk(KERN_INFO PFX "Found default %s" - " state machine at %s address 0x%lx\n", - si_to_str[info->si_type], - addr_space_to_str[info->io.addr_type], - info->io.addr_data); - } else - cleanup_one_si(info); - } else { - kfree(info); - } - } -} - static int is_new_interface(struct smi_info *info) { struct smi_info *e; @@ -3844,8 +3783,6 @@ static int init_ipmi_si(void) #ifdef CONFIG_PARISC register_parisc_driver(&ipmi_parisc_driver); parisc_registered = true; - /* poking PC IO addresses will crash machine, don't do it */ - si_trydefaults = 0; #endif /* We prefer devices with interrupts, but in the case of a machine @@ -3885,16 +3822,6 @@ static int init_ipmi_si(void) if (type) return 0; - if (si_trydefaults) { - mutex_lock(&smi_infos_lock); - if (list_empty(&smi_infos)) { - /* No BMC was found, try defaults. */ - mutex_unlock(&smi_infos_lock); - default_find_bmc(); - } else - mutex_unlock(&smi_infos_lock); - } - mutex_lock(&smi_infos_lock); if (unload_when_empty && list_empty(&smi_infos)) { mutex_unlock(&smi_infos_lock); diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 838dbfa3c331..78c5d5ae3857 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -277,7 +277,7 @@ int ipmi_validate_addr(struct ipmi_addr *addr, int len); */ enum ipmi_addr_src { SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS, - SI_PCI, SI_DEVICETREE, SI_DEFAULT + SI_PCI, SI_DEVICETREE, SI_LAST }; const char *ipmi_addr_src_to_str(enum ipmi_addr_src src); |