diff options
| -rw-r--r-- | Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6q.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl.dtsi | 8 | ||||
| -rw-r--r-- | drivers/dma/imx-sdma.c | 93 | ||||
| -rw-r--r-- | drivers/spi/spi-imx.c | 41 |
5 files changed, 111 insertions, 34 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index c9e97409e853..12c316ff4834 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -9,6 +9,7 @@ Required properties: "fsl,imx53-sdma" "fsl,imx6q-sdma" "fsl,imx7d-sdma" + "fsl,imx6ul-sdma" "fsl,imx8mq-sdma" "fsl,imx8mm-sdma" "fsl,imx8mn-sdma" diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 8d209c1b3ca7..9caba4529c71 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -177,7 +177,7 @@ clocks = <&clks IMX6Q_CLK_ECSPI5>, <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; - dmas = <&sdma 11 8 1>, <&sdma 12 8 2>; + dmas = <&sdma 11 7 1>, <&sdma 12 7 2>; dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 82e01ce026ea..89c342f3a7c2 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -334,7 +334,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI1>, <&clks IMX6QDL_CLK_ECSPI1>; clock-names = "ipg", "per"; - dmas = <&sdma 3 8 1>, <&sdma 4 8 2>; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -348,7 +348,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI2>, <&clks IMX6QDL_CLK_ECSPI2>; clock-names = "ipg", "per"; - dmas = <&sdma 5 8 1>, <&sdma 6 8 2>; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -362,7 +362,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI3>, <&clks IMX6QDL_CLK_ECSPI3>; clock-names = "ipg", "per"; - dmas = <&sdma 7 8 1>, <&sdma 8 8 2>; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -376,7 +376,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI4>, <&clks IMX6QDL_CLK_ECSPI4>; clock-names = "ipg", "per"; - dmas = <&sdma 9 8 1>, <&sdma 10 8 2>; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 8070fd664bfc..cacc725ca545 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -198,12 +198,12 @@ struct sdma_script_start_addrs { s32 per_2_firi_addr; s32 mcu_2_firi_addr; s32 uart_2_per_addr; - s32 uart_2_mcu_addr; + s32 uart_2_mcu_ram_addr; s32 per_2_app_addr; s32 mcu_2_app_addr; s32 per_2_per_addr; s32 uartsh_2_per_addr; - s32 uartsh_2_mcu_addr; + s32 uartsh_2_mcu_ram_addr; s32 per_2_shp_addr; s32 mcu_2_shp_addr; s32 ata_2_mcu_addr; @@ -230,6 +230,10 @@ struct sdma_script_start_addrs { s32 zcanfd_2_mcu_addr; s32 zqspi_2_mcu_addr; s32 mcu_2_ecspi_addr; + s32 mcu_2_sai_addr; + s32 sai_2_mcu_addr; + s32 uart_2_mcu_addr; + s32 uartsh_2_mcu_addr; /* End of v3 array */ s32 mcu_2_zqspi_addr; /* End of v4 array */ @@ -433,9 +437,10 @@ struct sdma_channel { unsigned long watermark_level; u32 shp_addr, per_addr; enum dma_status status; - bool context_loaded; struct imx_dma_data data; struct work_struct terminate_worker; + struct list_head terminated; + bool is_ram_script; }; #define IMX_DMA_SG_LOOP BIT(0) @@ -476,6 +481,13 @@ struct sdma_driver_data { int num_events; struct sdma_script_start_addrs *script_addrs; bool check_ratio; + /* + * ecspi ERR009165 fixed should be done in sdma script + * and it has been fixed in soc from i.mx6ul. + * please get more information from the below link: + * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf + */ + bool ecspi_fixed; }; struct sdma_engine { @@ -499,6 +511,7 @@ struct sdma_engine { struct sdma_buffer_descriptor *bd0; /* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/ bool clk_ratio; + bool fw_loaded; }; static int sdma_config_write(struct dma_chan *chan, @@ -595,6 +608,13 @@ static struct sdma_driver_data sdma_imx6q = { .script_addrs = &sdma_script_imx6q, }; +static struct sdma_driver_data sdma_imx6ul = { + .chnenbl0 = SDMA_CHNENBL0_IMX35, + .num_events = 48, + .script_addrs = &sdma_script_imx6q, + .ecspi_fixed = true, +}; + static struct sdma_script_start_addrs sdma_script_imx7d = { .ap_2_ap_addr = 644, .uart_2_mcu_addr = 819, @@ -628,6 +648,7 @@ static const struct of_device_id sdma_dt_ids[] = { { .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, }, { .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, }, { .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, }, + { .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, }, { .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, }, { /* sentinel */ } }; @@ -919,6 +940,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac, sdmac->pc_to_device = 0; sdmac->device_to_device = 0; sdmac->pc_to_pc = 0; + sdmac->is_ram_script = false; switch (peripheral_type) { case IMX_DMATYPE_MEMORY: @@ -945,6 +967,17 @@ static void sdma_get_pc(struct sdma_channel *sdmac, emi_2_per = sdma->script_addrs->mcu_2_ata_addr; break; case IMX_DMATYPE_CSPI: + per_2_emi = sdma->script_addrs->app_2_mcu_addr; + + /* Use rom script mcu_2_app if ERR009165 fixed */ + if (sdmac->sdma->drvdata->ecspi_fixed) { + emi_2_per = sdma->script_addrs->mcu_2_app_addr; + } else { + emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr; + sdmac->is_ram_script = true; + } + + break; case IMX_DMATYPE_EXT: case IMX_DMATYPE_SSI: case IMX_DMATYPE_SAI: @@ -954,6 +987,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac, case IMX_DMATYPE_SSI_DUAL: per_2_emi = sdma->script_addrs->ssish_2_mcu_addr; emi_2_per = sdma->script_addrs->mcu_2_ssish_addr; + sdmac->is_ram_script = true; break; case IMX_DMATYPE_SSI_SP: case IMX_DMATYPE_MMC: @@ -968,6 +1002,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac, per_2_emi = sdma->script_addrs->asrc_2_mcu_addr; emi_2_per = sdma->script_addrs->asrc_2_mcu_addr; per_2_per = sdma->script_addrs->per_2_per_addr; + sdmac->is_ram_script = true; break; case IMX_DMATYPE_ASRC_SP: per_2_emi = sdma->script_addrs->shp_2_mcu_addr; @@ -1008,9 +1043,6 @@ static int sdma_load_context(struct sdma_channel *sdmac) int ret; unsigned long flags; - if (sdmac->context_loaded) - return 0; - if (sdmac->direction == DMA_DEV_TO_MEM) load_address = sdmac->pc_from_device; else if (sdmac->direction == DMA_DEV_TO_DEV) @@ -1053,8 +1085,6 @@ static int sdma_load_context(struct sdma_channel *sdmac) spin_unlock_irqrestore(&sdma->channel_0_lock, flags); - sdmac->context_loaded = true; - return ret; } @@ -1078,9 +1108,6 @@ static void sdma_channel_terminate_work(struct work_struct *work) { struct sdma_channel *sdmac = container_of(work, struct sdma_channel, terminate_worker); - unsigned long flags; - LIST_HEAD(head); - /* * According to NXP R&D team a delay of one BD SDMA cost time * (maximum is 1ms) should be added after disable of the channel @@ -1089,11 +1116,7 @@ static void sdma_channel_terminate_work(struct work_struct *work) */ usleep_range(1000, 2000); - spin_lock_irqsave(&sdmac->vc.lock, flags); - vchan_get_all_descriptors(&sdmac->vc, &head); - spin_unlock_irqrestore(&sdmac->vc.lock, flags); - vchan_dma_desc_free_list(&sdmac->vc, &head); - sdmac->context_loaded = false; + vchan_dma_desc_free_list(&sdmac->vc, &sdmac->terminated); } static int sdma_terminate_all(struct dma_chan *chan) @@ -1107,6 +1130,13 @@ static int sdma_terminate_all(struct dma_chan *chan) if (sdmac->desc) { vchan_terminate_vdesc(&sdmac->desc->vd); + /* + * move out current descriptor into terminated list so that + * it could be free in sdma_channel_terminate_work alone + * later without potential involving next descriptor raised + * up before the last descriptor terminated. + */ + vchan_get_all_descriptors(&sdmac->vc, &sdmac->terminated); sdmac->desc = NULL; schedule_work(&sdmac->terminate_worker); } @@ -1168,7 +1198,6 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac) static int sdma_config_channel(struct dma_chan *chan) { struct sdma_channel *sdmac = to_sdma_chan(chan); - int ret; sdma_disable_channel(chan); @@ -1208,9 +1237,7 @@ static int sdma_config_channel(struct dma_chan *chan) sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */ } - ret = sdma_load_context(sdmac); - - return ret; + return 0; } static int sdma_set_channel_priority(struct sdma_channel *sdmac, @@ -1361,7 +1388,6 @@ static void sdma_free_chan_resources(struct dma_chan *chan) sdmac->event_id0 = 0; sdmac->event_id1 = 0; - sdmac->context_loaded = false; sdma_set_channel_priority(sdmac, 0); @@ -1374,6 +1400,11 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac, { struct sdma_desc *desc; + if (!sdmac->sdma->fw_loaded && sdmac->is_ram_script) { + dev_warn_once(sdmac->sdma->dev, "sdma firmware not ready!\n"); + goto err_out; + } + desc = kzalloc((sizeof(*desc)), GFP_NOWAIT); if (!desc) goto err_out; @@ -1722,8 +1753,8 @@ static void sdma_issue_pending(struct dma_chan *chan) #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38 -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 41 -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 42 +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 45 +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 46 static void sdma_add_scripts(struct sdma_engine *sdma, const struct sdma_script_start_addrs *addr) @@ -1747,6 +1778,19 @@ static void sdma_add_scripts(struct sdma_engine *sdma, for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; + + /* + * get uart_2_mcu_addr/uartsh_2_mcu_addr rom script specially because + * they are now replaced by uart_2_mcu_ram_addr/uartsh_2_mcu_ram_addr + * to be compatible with legacy freescale/nxp sdma firmware, and they + * are located in the bottom part of sdma_script_start_addrs which are + * beyond the SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1. + */ + if (addr->uart_2_mcu_addr) + sdma->script_addrs->uart_2_mcu_addr = addr->uart_2_mcu_addr; + if (addr->uartsh_2_mcu_addr) + sdma->script_addrs->uartsh_2_mcu_addr = addr->uartsh_2_mcu_addr; + } static void sdma_load_firmware(const struct firmware *fw, void *context) @@ -1803,6 +1847,8 @@ static void sdma_load_firmware(const struct firmware *fw, void *context) sdma_add_scripts(sdma, addr); + sdma->fw_loaded = true; + dev_info(sdma->dev, "loaded firmware %d.%d\n", header->version_major, header->version_minor); @@ -2086,6 +2132,7 @@ static int sdma_probe(struct platform_device *pdev) sdmac->channel = i; sdmac->vc.desc_free = sdma_desc_free; + INIT_LIST_HEAD(&sdmac->terminated); INIT_WORK(&sdmac->terminate_worker, sdma_channel_terminate_work); /* diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 4aee3db6d6df..63a8d7bc70c3 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -77,6 +77,11 @@ struct spi_imx_devtype_data { bool has_slavemode; unsigned int fifo_size; bool dynamic_burst; + /* + * ERR009165 fixed or not: + * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf + */ + bool tx_glitch_fixed; enum spi_imx_devtype devtype; }; @@ -608,8 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk); spi_imx->spi_bus_clk = clk; - if (spi_imx->usedma) + /* + * ERR009165: work in XHC mode instead of SMC as PIO on the chips + * before i.mx6ul. + */ + if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed) ctrl |= MX51_ECSPI_CTRL_SMC; + else + ctrl &= ~MX51_ECSPI_CTRL_SMC; writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); @@ -618,12 +629,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, static void mx51_setup_wml(struct spi_imx_data *spi_imx) { + u32 tx_wml = 0; + + if (spi_imx->devtype_data->tx_glitch_fixed) + tx_wml = spi_imx->wml; /* * Configure the DMA register: setup the watermark * and enable DMA request. */ writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | - MX51_ECSPI_DMA_TX_WML(spi_imx->wml) | + MX51_ECSPI_DMA_TX_WML(tx_wml) | MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA); @@ -1014,6 +1029,23 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = { .devtype = IMX53_ECSPI, }; +static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = { + .intctrl = mx51_ecspi_intctrl, + .prepare_message = mx51_ecspi_prepare_message, + .prepare_transfer = mx51_ecspi_prepare_transfer, + .trigger = mx51_ecspi_trigger, + .rx_available = mx51_ecspi_rx_available, + .reset = mx51_ecspi_reset, + .setup_wml = mx51_setup_wml, + .fifo_size = 64, + .has_dmamode = true, + .dynamic_burst = true, + .has_slavemode = true, + .tx_glitch_fixed = true, + .disable = mx51_ecspi_disable, + .devtype = IMX51_ECSPI, +}; + static const struct of_device_id spi_imx_dt_ids[] = { { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, }, { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, }, @@ -1022,6 +1054,7 @@ static const struct of_device_id spi_imx_dt_ids[] = { { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, }, { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, }, { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, }, + { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, spi_imx_dt_ids); @@ -1239,10 +1272,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, { int ret; - /* use pio mode for i.mx6dl chip TKT238285 */ - if (of_machine_is_compatible("fsl,imx6dl")) - return 0; - spi_imx->wml = spi_imx->devtype_data->fifo_size / 2; /* Prepare for TX DMA: */ |