diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-mt65xx.txt | 16 | ||||
| -rw-r--r-- | drivers/spi/spi-atmel.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-bcm2835.c | 6 | ||||
| -rw-r--r-- | drivers/spi/spi-meson-spifc.c | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-mt65xx.c | 53 | ||||
| -rw-r--r-- | drivers/spi/spi-pxa2xx.c | 4 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 3 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 2 |
8 files changed, 45 insertions, 42 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index dcefc438272f..6160ffbcb3d3 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -15,17 +15,18 @@ Required properties: - interrupts: Should contain spi interrupt - clocks: phandles to input clocks. - The first should be <&topckgen CLK_TOP_SPI_SEL>. - The second should be one of the following. + The first should be one of the following. It's PLL. - <&clk26m>: specify parent clock 26MHZ. - <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ. It's the default one. - <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ. - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ. - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ. + The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux. + The third is <&pericfg CLK_PERI_SPI0>. It's clock gate. -- clock-names: shall be "spi-clk" for the controller clock, and - "parent-clk" for the parent clock. +- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the + muxes clock, and "spi-clk" for the clock gate. Optional properties: - mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi @@ -44,8 +45,11 @@ spi: spi@1100a000 { #size-cells = <0>; reg = <0 0x1100a000 0 0x1000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_SPI_SEL>, <&topckgen CLK_TOP_SYSPLL3_D2>; - clock-names = "spi-clk", "parent-clk"; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + mediatek,pad-select = <0>; status = "disabled"; }; diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index bf9ed380bb1c..63318e2afba1 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1720,6 +1720,7 @@ static int atmel_spi_runtime_resume(struct device *dev) return clk_prepare_enable(as->clk); } +#ifdef CONFIG_PM_SLEEP static int atmel_spi_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); @@ -1756,6 +1757,7 @@ static int atmel_spi_resume(struct device *dev) return ret; } +#endif static const struct dev_pm_ops atmel_spi_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index e7874a6171ec..3e8eeb23d4e9 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -386,14 +386,14 @@ static bool bcm2835_spi_can_dma(struct spi_master *master, /* otherwise we only allow transfers within the same page * to avoid wasting time on dma_mapping when it is not practical */ - if (((size_t)tfr->tx_buf & PAGE_MASK) + tfr->len > PAGE_SIZE) { + if (((size_t)tfr->tx_buf & (PAGE_SIZE - 1)) + tfr->len > PAGE_SIZE) { dev_warn_once(&spi->dev, "Unaligned spi tx-transfer bridging page\n"); return false; } - if (((size_t)tfr->rx_buf & PAGE_MASK) + tfr->len > PAGE_SIZE) { + if (((size_t)tfr->rx_buf & (PAGE_SIZE - 1)) + tfr->len > PAGE_SIZE) { dev_warn_once(&spi->dev, - "Unaligned spi tx-transfer bridging page\n"); + "Unaligned spi rx-transfer bridging page\n"); return false; } diff --git a/drivers/spi/spi-meson-spifc.c b/drivers/spi/spi-meson-spifc.c index 5468fc70dbf8..2465259f6241 100644 --- a/drivers/spi/spi-meson-spifc.c +++ b/drivers/spi/spi-meson-spifc.c @@ -444,6 +444,7 @@ static const struct of_device_id meson_spifc_dt_match[] = { { .compatible = "amlogic,meson6-spifc", }, { }, }; +MODULE_DEVICE_TABLE(of, meson_spifc_dt_match); static struct platform_driver meson_spifc_driver = { .probe = meson_spifc_probe, diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 5f6315c47920..ecb6c58238c4 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -85,7 +85,7 @@ struct mtk_spi { void __iomem *base; u32 state; u32 pad_sel; - struct clk *spi_clk, *parent_clk; + struct clk *parent_clk, *sel_clk, *spi_clk; struct spi_transfer *cur_transfer; u32 xfer_len; struct scatterlist *tx_sgl, *rx_sgl; @@ -173,22 +173,6 @@ static void mtk_spi_config(struct mtk_spi *mdata, writel(mdata->pad_sel, mdata->base + SPI_PAD_SEL_REG); } -static int mtk_spi_prepare_hardware(struct spi_master *master) -{ - struct spi_transfer *trans; - struct mtk_spi *mdata = spi_master_get_devdata(master); - struct spi_message *msg = master->cur_msg; - - trans = list_first_entry(&msg->transfers, struct spi_transfer, - transfer_list); - if (!trans->cs_change) { - mdata->state = MTK_SPI_IDLE; - mtk_spi_reset(mdata); - } - - return 0; -} - static int mtk_spi_prepare_message(struct spi_master *master, struct spi_message *msg) { @@ -228,11 +212,15 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable) struct mtk_spi *mdata = spi_master_get_devdata(spi->master); reg_val = readl(mdata->base + SPI_CMD_REG); - if (!enable) + if (!enable) { reg_val |= SPI_CMD_PAUSE_EN; - else + writel(reg_val, mdata->base + SPI_CMD_REG); + } else { reg_val &= ~SPI_CMD_PAUSE_EN; - writel(reg_val, mdata->base + SPI_CMD_REG); + writel(reg_val, mdata->base + SPI_CMD_REG); + mdata->state = MTK_SPI_IDLE; + mtk_spi_reset(mdata); + } } static void mtk_spi_prepare_transfer(struct spi_master *master, @@ -509,7 +497,6 @@ static int mtk_spi_probe(struct platform_device *pdev) master->mode_bits = SPI_CPOL | SPI_CPHA; master->set_cs = mtk_spi_set_cs; - master->prepare_transfer_hardware = mtk_spi_prepare_hardware; master->prepare_message = mtk_spi_prepare_message; master->transfer_one = mtk_spi_transfer_one; master->can_dma = mtk_spi_can_dma; @@ -576,13 +563,6 @@ static int mtk_spi_probe(struct platform_device *pdev) goto err_put_master; } - mdata->spi_clk = devm_clk_get(&pdev->dev, "spi-clk"); - if (IS_ERR(mdata->spi_clk)) { - ret = PTR_ERR(mdata->spi_clk); - dev_err(&pdev->dev, "failed to get spi-clk: %d\n", ret); - goto err_put_master; - } - mdata->parent_clk = devm_clk_get(&pdev->dev, "parent-clk"); if (IS_ERR(mdata->parent_clk)) { ret = PTR_ERR(mdata->parent_clk); @@ -590,13 +570,27 @@ static int mtk_spi_probe(struct platform_device *pdev) goto err_put_master; } + mdata->sel_clk = devm_clk_get(&pdev->dev, "sel-clk"); + if (IS_ERR(mdata->sel_clk)) { + ret = PTR_ERR(mdata->sel_clk); + dev_err(&pdev->dev, "failed to get sel-clk: %d\n", ret); + goto err_put_master; + } + + mdata->spi_clk = devm_clk_get(&pdev->dev, "spi-clk"); + if (IS_ERR(mdata->spi_clk)) { + ret = PTR_ERR(mdata->spi_clk); + dev_err(&pdev->dev, "failed to get spi-clk: %d\n", ret); + goto err_put_master; + } + ret = clk_prepare_enable(mdata->spi_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to enable spi_clk (%d)\n", ret); goto err_put_master; } - ret = clk_set_parent(mdata->spi_clk, mdata->parent_clk); + ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret); goto err_disable_clk; @@ -630,7 +624,6 @@ static int mtk_spi_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); mtk_spi_reset(mdata); - clk_disable_unprepare(mdata->spi_clk); spi_master_put(master); return 0; diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index fdd791977041..a8ef38ebb9c9 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -654,6 +654,10 @@ static irqreturn_t ssp_int(int irq, void *dev_id) if (!(sccr1_reg & SSCR1_TIE)) mask &= ~SSSR_TFS; + /* Ignore RX timeout interrupt if it is disabled */ + if (!(sccr1_reg & SSCR1_TINTE)) + mask &= ~SSSR_TINT; + if (!(status & mask)) return IRQ_NONE; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 3abb3903f2ad..a5f53de813d3 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1610,8 +1610,7 @@ static struct class spi_master_class = { * * The caller is responsible for assigning the bus number and initializing * the master's methods before calling spi_register_master(); and (after errors - * adding the device) calling spi_master_put() and kfree() to prevent a memory - * leak. + * adding the device) calling spi_master_put() to prevent a memory leak. */ struct spi_master *spi_alloc_master(struct device *dev, unsigned size) { diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 269e8afd3e2a..6b00f18f5e6b 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -34,7 +34,7 @@ extern struct bus_type spi_bus_type; /** * struct spi_statistics - statistics for spi transfers - * @clock: lock protecting this structure + * @lock: lock protecting this structure * * @messages: number of spi-messages handled * @transfers: number of spi_transfers handled |