diff options
| -rw-r--r-- | drivers/hid/Kconfig | 28 | ||||
| -rw-r--r-- | drivers/hid/Makefile | 2 | ||||
| -rw-r--r-- | drivers/hid/hid-chicony.c | 7 | ||||
| -rw-r--r-- | drivers/hid/hid-core.c | 21 | ||||
| -rw-r--r-- | drivers/hid/hid-ids.h | 16 | ||||
| -rw-r--r-- | drivers/hid/hid-kye.c | 399 | ||||
| -rw-r--r-- | drivers/hid/hid-magicmouse.c | 2 | ||||
| -rw-r--r-- | drivers/hid/hid-multitouch.c | 5 | ||||
| -rw-r--r-- | drivers/hid/hid-saitek.c | 70 | ||||
| -rw-r--r-- | drivers/hid/hid-sjoy.c | 6 | ||||
| -rw-r--r-- | drivers/hid/hid-tivo.c | 90 | ||||
| -rw-r--r-- | drivers/hid/hid-uclogic.c | 413 | ||||
| -rw-r--r-- | drivers/hid/hid-wacom.c | 1 | ||||
| -rw-r--r-- | drivers/hid/hid-waltop.c | 881 | ||||
| -rw-r--r-- | drivers/hid/usbhid/hid-quirks.c | 3 |
15 files changed, 860 insertions, 1084 deletions
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 3890ac698061..a3d033252995 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -200,11 +200,14 @@ config HID_KEYTOUCH - Keytouch IEC 60945 config HID_KYE - tristate "Kye/Genius Ergo Mouse" if EXPERT + tristate "KYE/Genius devices" depends on USB_HID - default !EXPERT ---help--- - Support for Kye/Genius Ergo Mouse. + Support for KYE/Genius devices not fully compliant with HID standard: + - Ergo Mouse + - EasyPen i405X tablet + - MousePen i608X tablet + - EasyPen M610X tablet config HID_UCLOGIC tristate "UC-Logic" @@ -257,7 +260,9 @@ config HID_LOGITECH_DJ ---help--- Say Y if you want support for Logitech Unifying receivers and devices. Unifying receivers are capable of pairing up to 6 Logitech compliant - devices to the same receiver. + devices to the same receiver. Without this driver it will be handled by + generic USB_HID driver and all incomming events will be multiplexed + into a single mouse and a single keyboard device. config LOGITECH_FF bool "Logitech force feedback support" @@ -485,6 +490,15 @@ config HID_ROCCAT Say Y here if you have a Roccat mouse or keyboard and want support for its special functionalities. +config HID_SAITEK + tristate "Saitek non-fully HID-compliant devices" + depends on USB_HID + ---help--- + Support for Saitek devices that are not fully compliant with the + HID standard. + + Currently only supports the PS1000 controller. + config HID_SAMSUNG tristate "Samsung InfraRed remote control or keyboards" depends on USB_HID @@ -549,6 +563,12 @@ config SMARTJOYPLUS_FF Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to enable force feedback support for it. +config HID_TIVO + tristate "TiVo Slide Bluetooth remote control support" + depends on (USB_HID || BT_HIDP) + ---help--- + Say Y if you have a TiVo Slide Bluetooth remote control. + config HID_TOPSEED tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support" depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 7d926719e21b..22f1d16cd79c 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -67,6 +67,7 @@ obj-$(CONFIG_HID_PRIMAX) += hid-primax.o obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \ hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \ hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-pyra.o +obj-$(CONFIG_HID_SAITEK) += hid-saitek.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o obj-$(CONFIG_HID_SONY) += hid-sony.o @@ -74,6 +75,7 @@ obj-$(CONFIG_HID_SPEEDLINK) += hid-speedlink.o obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o +obj-$(CONFIG_HID_TIVO) += hid-tivo.o obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o diff --git a/drivers/hid/hid-chicony.c b/drivers/hid/hid-chicony.c index 8965ad93d510..b99af346fdff 100644 --- a/drivers/hid/hid-chicony.c +++ b/drivers/hid/hid-chicony.c @@ -45,6 +45,12 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi, case 0xff09: ch_map_key_clear(BTN_9); break; case 0xff0a: ch_map_key_clear(BTN_A); break; case 0xff0b: ch_map_key_clear(BTN_B); break; + case 0x00f1: ch_map_key_clear(KEY_WLAN); break; + case 0x00f2: ch_map_key_clear(KEY_BRIGHTNESSDOWN); break; + case 0x00f3: ch_map_key_clear(KEY_BRIGHTNESSUP); break; + case 0x00f4: ch_map_key_clear(KEY_DISPLAY_OFF); break; + case 0x00f7: ch_map_key_clear(KEY_CAMERA); break; + case 0x00f8: ch_map_key_clear(KEY_PROG1); break; default: return 0; } @@ -53,6 +59,7 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi, static const struct hid_device_id ch_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) }, { } }; MODULE_DEVICE_TABLE(hid, ch_devices); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 05a0c9a35bf2..f5d1ca8272c5 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -4,7 +4,7 @@ * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc - * Copyright (c) 2006-2010 Jiri Kosina + * Copyright (c) 2006-2012 Jiri Kosina */ /* @@ -50,6 +50,10 @@ module_param_named(debug, hid_debug, int, 0600); MODULE_PARM_DESC(debug, "toggle HID debugging messages"); EXPORT_SYMBOL_GPL(hid_debug); +static int hid_ignore_special_drivers = 0; +module_param_named(ignore_special_drivers, hid_ignore_special_drivers, int, 0600); +MODULE_PARM_DESC(debug, "Ignore any special drivers and handle all devices by generic driver"); + /* * Register a new report for a device. */ @@ -1395,6 +1399,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) }, { HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) }, @@ -1418,6 +1423,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) }, { HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_FRUCTEL, USB_DEVICE_ID_GAMETEL_MT_MODE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) }, @@ -1436,6 +1442,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) }, { HID_USB_DEVICE(USB_VENDOR_ID_LG, USB_DEVICE_ID_LG_MULTITOUCH) }, @@ -1463,8 +1472,10 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFGT_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL) }, +#if IS_ENABLED(CONFIG_HID_LOGITECH_DJ) { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2) }, +#endif { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, @@ -1519,6 +1530,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KOVAPLUS) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) }, @@ -1538,6 +1550,8 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) }, + { HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL, USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) }, @@ -1551,6 +1565,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) }, { HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) }, @@ -1559,6 +1574,8 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_Q_PAD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_PID_0038) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_XAT, USB_DEVICE_ID_XAT_CSR) }, @@ -1674,7 +1691,7 @@ static int hid_bus_match(struct device *dev, struct device_driver *drv) return 0; /* generic wants all that don't have specialized driver */ - if (!strncmp(hdrv->name, "generic-", 8)) + if (!strncmp(hdrv->name, "generic-", 8) && !hid_ignore_special_drivers) return !hid_match_id(hdev, hid_have_special_driver); return 1; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 55360fefee5b..3eb00902ca40 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -177,6 +177,7 @@ #define USB_VENDOR_ID_CH 0x068e #define USB_DEVICE_ID_CH_PRO_THROTTLE 0x00f1 #define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 +#define USB_DEVICE_ID_CH_FIGHTERSTICK 0x00f3 #define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4 #define USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE 0x0051 #define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff @@ -194,6 +195,7 @@ #define USB_DEVICE_ID_CHICONY_TACTICAL_PAD 0x0418 #define USB_DEVICE_ID_CHICONY_MULTI_TOUCH 0xb19d #define USB_DEVICE_ID_CHICONY_WIRELESS 0x0618 +#define USB_DEVICE_ID_CHICONY_WIRELESS2 0x1123 #define USB_VENDOR_ID_CHUNGHWAT 0x2247 #define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH 0x0001 @@ -280,6 +282,9 @@ #define USB_VENDOR_ID_EZKEY 0x0518 #define USB_DEVICE_ID_BTC_8193 0x0002 +#define USB_VENDOR_ID_FRUCTEL 0x25B6 +#define USB_DEVICE_ID_GAMETEL_MT_MODE 0x0002 + #define USB_VENDOR_ID_GAMERON 0x0810 #define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001 #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002 @@ -417,6 +422,9 @@ #define USB_VENDOR_ID_KYE 0x0458 #define USB_DEVICE_ID_KYE_ERGO_525V 0x0087 #define USB_DEVICE_ID_KYE_GPEN_560 0x5003 +#define USB_DEVICE_ID_KYE_EASYPEN_I405X 0x5010 +#define USB_DEVICE_ID_KYE_MOUSEPEN_I608X 0x5011 +#define USB_DEVICE_ID_KYE_EASYPEN_M610X 0x5013 #define USB_VENDOR_ID_LABTEC 0x1020 #define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006 @@ -629,6 +637,7 @@ #define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 +#define USB_DEVICE_ID_SAITEK_PS1000 0x0621 #define USB_VENDOR_ID_SAMSUNG 0x0419 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 @@ -670,6 +679,10 @@ #define USB_VENDOR_ID_THRUSTMASTER 0x044f +#define USB_VENDOR_ID_TIVO 0x150a +#define USB_DEVICE_ID_TIVO_SLIDE_BT 0x1200 +#define USB_DEVICE_ID_TIVO_SLIDE 0x1201 + #define USB_VENDOR_ID_TOPSEED 0x0766 #define USB_DEVICE_ID_TOPSEED_CYBERLINK 0x0204 @@ -720,6 +733,8 @@ #define USB_VENDOR_ID_WALTOP 0x172f #define USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH 0x0032 #define USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH 0x0034 +#define USB_DEVICE_ID_WALTOP_Q_PAD 0x0037 +#define USB_DEVICE_ID_WALTOP_PID_0038 0x0038 #define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH 0x0501 #define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH 0x0500 @@ -728,6 +743,7 @@ #define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101 #define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104 #define USB_DEVICE_ID_8_8_4_IF_KIT 0x8201 +#define USB_DEVICE_ID_SUPER_JOY_BOX_3 0x8888 #define USB_DEVICE_ID_QUAD_USB_JOYPAD 0x8800 #define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866 diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c index f2ba9efc3a53..b4f0d8216fd0 100644 --- a/drivers/hid/hid-kye.c +++ b/drivers/hid/hid-kye.c @@ -3,6 +3,7 @@ * * Copyright (c) 2009 Jiri Kosina * Copyright (c) 2009 Tomas Hanak + * Copyright (c) 2012 Nikolai Kondrashov */ /* @@ -15,36 +16,399 @@ #include <linux/device.h> #include <linux/hid.h> #include <linux/module.h> +#include <linux/usb.h> +#include "usbhid/usbhid.h" #include "hid-ids.h" -/* the fixups that need to be done: - * - change led usage page to button for extra buttons - * - report size 8 count 1 must be size 1 count 8 for button bitfield - * - change the button usage range to 4-7 for the extra buttons +/* + * See EasyPen i405X description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=KYE_EasyPen_i405X */ + +/* Original EasyPen i405X report descriptor size */ +#define EASYPEN_I405X_RDESC_ORIG_SIZE 476 + +/* Fixed EasyPen i405X report descriptor */ +static __u8 easypen_i405x_rdesc_fixed[] = { + 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ + 0x09, 0x01, /* Usage (01h), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x05, /* Report ID (5), */ + 0x09, 0x01, /* Usage (01h), */ + 0x15, 0x80, /* Logical Minimum (-128), */ + 0x25, 0x7F, /* Logical Maximum (127), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x07, /* Report Count (7), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0xC0, /* End Collection, */ + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x10, /* Report ID (16), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x04, /* Report Count (4), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x09, 0x32, /* Usage (In Range), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x7C, 0x15, /* Physical Maximum (5500), */ + 0x26, 0x00, 0x37, /* Logical Maximum (14080), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0xA0, 0x0F, /* Physical Maximum (4000), */ + 0x26, 0x00, 0x28, /* Logical Maximum (10240), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* + * See MousePen i608X description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=KYE_MousePen_i608X + */ + +/* Original MousePen i608X report descriptor size */ +#define MOUSEPEN_I608X_RDESC_ORIG_SIZE 476 + +/* Fixed MousePen i608X report descriptor */ +static __u8 mousepen_i608x_rdesc_fixed[] = { + 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ + 0x09, 0x01, /* Usage (01h), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x05, /* Report ID (5), */ + 0x09, 0x01, /* Usage (01h), */ + 0x15, 0x80, /* Logical Minimum (-128), */ + 0x25, 0x7F, /* Logical Maximum (127), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x07, /* Report Count (7), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0xC0, /* End Collection, */ + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x10, /* Report ID (16), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x04, /* Report Count (4), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x09, 0x32, /* Usage (In Range), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x40, 0x1F, /* Physical Maximum (8000), */ + 0x26, 0x00, 0x50, /* Logical Maximum (20480), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x70, 0x17, /* Physical Maximum (6000), */ + 0x26, 0x00, 0x3C, /* Logical Maximum (15360), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0, /* End Collection, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x02, /* Usage (Mouse), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x11, /* Report ID (17), */ + 0x09, 0x01, /* Usage (Pointer), */ + 0xA0, /* Collection (Physical), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x09, /* Usage Page (Button), */ + 0x75, 0x01, /* Report Size (1), */ + 0x19, 0x01, /* Usage Minimum (01h), */ + 0x29, 0x03, /* Usage Maximum (03h), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x05, /* Report Count (5), */ + 0x81, 0x01, /* Input (Constant), */ + 0xB4, /* Pop, */ + 0x95, 0x01, /* Report Count (1), */ + 0xA4, /* Push, */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x75, 0x10, /* Report Size (16), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x40, 0x1F, /* Physical Maximum (8000), */ + 0x26, 0x00, 0x50, /* Logical Maximum (20480), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x70, 0x17, /* Physical Maximum (6000), */ + 0x26, 0x00, 0x3C, /* Logical Maximum (15360), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x75, 0x08, /* Report Size (8), */ + 0x09, 0x38, /* Usage (Wheel), */ + 0x15, 0xFF, /* Logical Minimum (-1), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x81, 0x01, /* Input (Constant), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* + * See EasyPen M610X description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=KYE_EasyPen_M610X + */ + +/* Original EasyPen M610X report descriptor size */ +#define EASYPEN_M610X_RDESC_ORIG_SIZE 476 + +/* Fixed EasyPen M610X report descriptor */ +static __u8 easypen_m610x_rdesc_fixed[] = { + 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ + 0x09, 0x01, /* Usage (01h), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x05, /* Report ID (5), */ + 0x09, 0x01, /* Usage (01h), */ + 0x15, 0x80, /* Logical Minimum (-128), */ + 0x25, 0x7F, /* Logical Maximum (127), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x07, /* Report Count (7), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0xC0, /* End Collection, */ + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x10, /* Report ID (16), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x04, /* Report Count (4), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x09, 0x32, /* Usage (In Range), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x10, 0x27, /* Physical Maximum (10000), */ + 0x27, 0x00, 0xA0, 0x00, 0x00, /* Logical Maximum (40960), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x6A, 0x18, /* Physical Maximum (6250), */ + 0x26, 0x00, 0x64, /* Logical Maximum (25600), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0, /* End Collection, */ + 0x05, 0x0C, /* Usage Page (Consumer), */ + 0x09, 0x01, /* Usage (Consumer Control), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x12, /* Report ID (18), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x04, /* Report Count (4), */ + 0x0A, 0x1A, 0x02, /* Usage (AC Undo), */ + 0x0A, 0x79, 0x02, /* Usage (AC Redo Or Repeat), */ + 0x0A, 0x2D, 0x02, /* Usage (AC Zoom In), */ + 0x0A, 0x2E, 0x02, /* Usage (AC Zoom Out), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x01, /* Report Count (1), */ + 0x75, 0x14, /* Report Size (20), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x75, 0x20, /* Report Size (32), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0xC0 /* End Collection */ +}; + static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { - if (*rsize >= 74 && - rdesc[61] == 0x05 && rdesc[62] == 0x08 && - rdesc[63] == 0x19 && rdesc[64] == 0x08 && - rdesc[65] == 0x29 && rdesc[66] == 0x0f && - rdesc[71] == 0x75 && rdesc[72] == 0x08 && - rdesc[73] == 0x95 && rdesc[74] == 0x01) { - hid_info(hdev, - "fixing up Kye/Genius Ergo Mouse report descriptor\n"); - rdesc[62] = 0x09; - rdesc[64] = 0x04; - rdesc[66] = 0x07; - rdesc[72] = 0x01; - rdesc[74] = 0x08; + switch (hdev->product) { + case USB_DEVICE_ID_KYE_ERGO_525V: + /* the fixups that need to be done: + * - change led usage page to button for extra buttons + * - report size 8 count 1 must be size 1 count 8 for button + * bitfield + * - change the button usage range to 4-7 for the extra + * buttons + */ + if (*rsize >= 74 && + rdesc[61] == 0x05 && rdesc[62] == 0x08 && + rdesc[63] == 0x19 && rdesc[64] == 0x08 && + rdesc[65] == 0x29 && rdesc[66] == 0x0f && + rdesc[71] == 0x75 && rdesc[72] == 0x08 && + rdesc[73] == 0x95 && rdesc[74] == 0x01) { + hid_info(hdev, + "fixing up Kye/Genius Ergo Mouse " + "report descriptor\n"); + rdesc[62] = 0x09; + rdesc[64] = 0x04; + rdesc[66] = 0x07; + rdesc[72] = 0x01; + rdesc[74] = 0x08; + } + break; + case USB_DEVICE_ID_KYE_EASYPEN_I405X: + if (*rsize == EASYPEN_I405X_RDESC_ORIG_SIZE) { + rdesc = easypen_i405x_rdesc_fixed; + *rsize = sizeof(easypen_i405x_rdesc_fixed); + } + break; + case USB_DEVICE_ID_KYE_MOUSEPEN_I608X: + if (*rsize == MOUSEPEN_I608X_RDESC_ORIG_SIZE) { + rdesc = mousepen_i608x_rdesc_fixed; + *rsize = sizeof(mousepen_i608x_rdesc_fixed); + } + break; + case USB_DEVICE_ID_KYE_EASYPEN_M610X: + if (*rsize == EASYPEN_M610X_RDESC_ORIG_SIZE) { + rdesc = easypen_m610x_rdesc_fixed; + *rsize = sizeof(easypen_m610x_rdesc_fixed); + } + break; } return rdesc; } +/** + * Enable fully-functional tablet mode by setting a special feature report. + * + * @hdev: HID device + * + * The specific report ID and data were discovered by sniffing the + * Windows driver traffic. + */ +static int kye_tablet_enable(struct hid_device *hdev) +{ + struct list_head *list; + struct list_head *head; + struct hid_report *report; + __s32 *value; + + list = &hdev->report_enum[HID_FEATURE_REPORT].report_list; + list_for_each(head, list) { + report = list_entry(head, struct hid_report, list); + if (report->id == 5) + break; + } + + if (head == list) { + hid_err(hdev, "tablet-enabling feature report not found\n"); + return -ENODEV; + } + + if (report->maxfield < 1 || report->field[0]->report_count < 7) { + hid_err(hdev, "invalid tablet-enabling feature report\n"); + return -ENODEV; + } + + value = report->field[0]->value; + + value[0] = 0x12; + value[1] = 0x10; + value[2] = 0x11; + value[3] = 0x12; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; + usbhid_submit_report(hdev, report, USB_DIR_OUT); + + return 0; +} + +static int kye_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "parse failed\n"); + goto err; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) { + hid_err(hdev, "hw start failed\n"); + goto err; + } + + switch (id->product) { + case USB_DEVICE_ID_KYE_EASYPEN_I405X: + case USB_DEVICE_ID_KYE_MOUSEPEN_I608X: + case USB_DEVICE_ID_KYE_EASYPEN_M610X: + ret = kye_tablet_enable(hdev); + if (ret) { + hid_err(hdev, "tablet enabling failed\n"); + goto enabling_err; + } + break; + } + + return 0; +enabling_err: + hid_hw_stop(hdev); +err: + return ret; +} + static const struct hid_device_id kye_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, + USB_DEVICE_ID_KYE_EASYPEN_I405X) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, + USB_DEVICE_ID_KYE_MOUSEPEN_I608X) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, + USB_DEVICE_ID_KYE_EASYPEN_M610X) }, { } }; MODULE_DEVICE_TABLE(hid, kye_devices); @@ -52,6 +416,7 @@ MODULE_DEVICE_TABLE(hid, kye_devices); static struct hid_driver kye_driver = { .name = "kye", .id_table = kye_devices, + .probe = kye_probe, .report_fixup = kye_report_fixup, }; diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 2ab71758e2e2..7cf3ffe4b7bc 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -418,6 +418,8 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h __set_bit(BTN_TOOL_TRIPLETAP, input->keybit); __set_bit(BTN_TOOL_QUADTAP, input->keybit); __set_bit(BTN_TOUCH, input->keybit); + __set_bit(INPUT_PROP_POINTER, input->propbit); + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); } if (report_touches) { diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 6fb46d70f39d..1d5b94167b52 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -837,6 +837,11 @@ static const struct hid_device_id mt_devices[] = { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) }, + /* Gametel game controller */ + { .driver_data = MT_CLS_DEFAULT, + HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_FRUCTEL, + USB_DEVICE_ID_GAMETEL_MT_MODE) }, + /* GoodTouch panels */ { .driver_data = MT_CLS_DEFAULT, HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH, diff --git a/drivers/hid/hid-saitek.c b/drivers/hid/hid-saitek.c new file mode 100644 index 000000000000..45aea77bb611 --- /dev/null +++ b/drivers/hid/hid-saitek.c @@ -0,0 +1,70 @@ +/* + * HID driver for Saitek devices, currently only the PS1000 (USB gamepad). + * Fixes the HID report descriptor by removing a non-existent axis and + * clearing the constant bit on the input reports for buttons and d-pad. + * (This module is based on "hid-ortek".) + * + * Copyright (c) 2012 Andreas Hübner + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> +#include <linux/kernel.h> + +#include "hid-ids.h" + +static __u8 *saitek_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) +{ + if (*rsize == 137 && rdesc[20] == 0x09 && rdesc[21] == 0x33 + && rdesc[94] == 0x81 && rdesc[95] == 0x03 + && rdesc[110] == 0x81 && rdesc[111] == 0x03) { + + hid_info(hdev, "Fixing up Saitek PS1000 report descriptor\n"); + + /* convert spurious axis to a "noop" Logical Minimum (0) */ + rdesc[20] = 0x15; + rdesc[21] = 0x00; + + /* clear constant bit on buttons and d-pad */ + rdesc[95] = 0x02; + rdesc[111] = 0x02; + + } + return rdesc; +} + +static const struct hid_device_id saitek_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000)}, + { } +}; + +MODULE_DEVICE_TABLE(hid, saitek_devices); + +static struct hid_driver saitek_driver = { + .name = "saitek", + .id_table = saitek_devices, + .report_fixup = saitek_report_fixup +}; + +static int __init saitek_init(void) +{ + return hid_register_driver(&saitek_driver); +} + +static void __exit saitek_exit(void) +{ + hid_unregister_driver(&saitek_driver); +} + +module_init(saitek_init); +module_exit(saitek_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/hid/hid-sjoy.c b/drivers/hid/hid-sjoy.c index 4b1448613ea6..42257acfeb73 100644 --- a/drivers/hid/hid-sjoy.c +++ b/drivers/hid/hid-sjoy.c @@ -155,7 +155,8 @@ err: } static const struct hid_device_id sjoy_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO), + .driver_data = HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO), .driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET | HID_QUIRK_SKIP_OUTPUT_REPORTS }, @@ -163,8 +164,9 @@ static const struct hid_device_id sjoy_devices[] = { .driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET | HID_QUIRK_SKIP_OUTPUT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD), - .driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET | + .driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS }, { } }; diff --git a/drivers/hid/hid-tivo.c b/drivers/hid/hid-tivo.c new file mode 100644 index 000000000000..de47039c708c --- /dev/null +++ b/drivers/hid/hid-tivo.c @@ -0,0 +1,90 @@ +/* + * HID driver for TiVo Slide Bluetooth remote + * + * Copyright (c) 2011 Jarod Wilson <jarod@redhat.com> + * based on the hid-topseed driver, which is in turn, based on hid-cherry... + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> + +#include "hid-ids.h" + +#define HID_UP_TIVOVENDOR 0xffff0000 +#define tivo_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \ + EV_KEY, (c)) + +static int tivo_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + switch (usage->hid & HID_USAGE_PAGE) { + case HID_UP_TIVOVENDOR: + switch (usage->hid & HID_USAGE) { + /* TiVo button */ + case 0x3d: tivo_map_key_clear(KEY_MEDIA); break; + /* Live TV */ + case 0x3e: tivo_map_key_clear(KEY_TV); break; + /* Red thumbs down */ + case 0x41: tivo_map_key_clear(KEY_KPMINUS); break; + /* Green thumbs up */ + case 0x42: tivo_map_key_clear(KEY_KPPLUS); break; + default: + return 0; + } + break; + case HID_UP_CONSUMER: + switch (usage->hid & HID_USAGE) { + /* Enter/Last (default mapping: KEY_LAST) */ + case 0x083: tivo_map_key_clear(KEY_ENTER); break; + /* Info (default mapping: KEY_PROPS) */ + case 0x209: tivo_map_key_clear(KEY_INFO); break; + default: + return 0; + } + break; + default: + return 0; + } + + /* This means we found a matching mapping here, else, look in the + * standard hid mappings in hid-input.c */ + return 1; +} + +static const struct hid_device_id tivo_devices[] = { + /* TiVo Slide Bluetooth remote, pairs with a Broadcom dongle */ + { HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) }, + { HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) }, + { } +}; +MODULE_DEVICE_TABLE(hid, tivo_devices); + +static struct hid_driver tivo_driver = { + .name = "tivo_slide", + .id_table = tivo_devices, + .input_mapping = tivo_input_mapping, +}; + +static int __init tivo_init(void) +{ + return hid_register_driver(&tivo_driver); +} + +static void __exit tivo_exit(void) +{ + hid_unregister_driver(&tivo_driver); +} + +module_init(tivo_init); +module_exit(tivo_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); diff --git a/drivers/hid/hid-uclogic.c b/drivers/hid/hid-uclogic.c index e15732f1a22d..1f1128910337 100644 --- a/drivers/hid/hid-uclogic.c +++ b/drivers/hid/hid-uclogic.c @@ -18,141 +18,16 @@ #include "hid-ids.h" /* - * The original descriptors of WPXXXXU tablets have three report IDs, of - * which only two are used (8 and 9), and the remaining (7) seems to have - * the originally intended pen description which was abandoned for some - * reason. From this unused description it is possible to extract the - * actual physical extents and resolution. All the models use the same - * descriptor with different extents for the unused report ID. - * - * Here it is: - * - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Pen), ; Pen (02h, application collection) - * Collection (Application), - * Report ID (7), - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (Tip Switch), ; Tip switch (42h, momentary control) - * Usage (Barrel Switch), ; Barrel switch (44h, momentary control) - * Usage (Eraser), ; Eraser (45h, momentary control) - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (3), - * Input (Variable), - * Report Count (3), - * Input (Constant, Variable), - * Usage (In Range), ; In range (32h, momentary control) - * Report Count (1), - * Input (Variable), - * Report Count (1), - * Input (Constant, Variable), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Report Size (16), - * Report Count (1), - * Push, - * Unit Exponent (13), - * Unit (Inch^3), - * Physical Minimum (0), - * Physical Maximum (Xpm), - * Logical Maximum (Xlm), - * Input (Variable), - * Usage (Y), ; Y (31h, dynamic value) - * Physical Maximum (Ypm), - * Logical Maximum (Ylm), - * Input (Variable), - * Pop, - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) - * Logical Maximum (1023), - * Input (Variable), - * Report Size (16), - * End Collection, - * End Collection, - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (Mouse), ; Mouse (02h, application collection) - * Collection (Application), - * Report ID (8), - * Usage (Pointer), ; Pointer (01h, physical collection) - * Collection (Physical), - * Usage Page (Button), ; Button (09h) - * Usage Minimum (01h), - * Usage Maximum (03h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Count (3), - * Report Size (1), - * Input (Variable), - * Report Count (5), - * Input (Constant), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Usage (Y), ; Y (31h, dynamic value) - * Usage (Wheel), ; Wheel (38h, dynamic value) - * Usage (00h), - * Logical Minimum (-127), - * Logical Maximum (127), - * Report Size (8), - * Report Count (4), - * Input (Variable, Relative), - * End Collection, - * End Collection, - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (Mouse), ; Mouse (02h, application collection) - * Collection (Application), - * Report ID (9), - * Usage (Pointer), ; Pointer (01h, physical collection) - * Collection (Physical), - * Usage Page (Button), ; Button (09h) - * Usage Minimum (01h), - * Usage Maximum (03h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Count (3), - * Report Size (1), - * Input (Variable), - * Report Count (5), - * Input (Constant), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Usage (Y), ; Y (31h, dynamic value) - * Logical Minimum (0), - * Logical Maximum (32767), - * Physical Minimum (0), - * Physical Maximum (32767), - * Report Count (2), - * Report Size (16), - * Input (Variable), - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) - * Logical Maximum (1023), - * Report Count (1), - * Report Size (16), - * Input (Variable), - * End Collection, - * End Collection - * - * Here are the extents values for the WPXXXXU models: - * - * Xpm Xlm Ypm Ylm - * WP4030U 4000 8000 3000 6000 - * WP5540U 5500 11000 4000 8000 - * WP8060U 8000 16000 6000 12000 - * - * This suggests that all of them have 2000 LPI resolution, as advertised. + * See WPXXXXU model descriptions, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP4030U + * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP5540U + * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP8060U */ /* Size of the original descriptor of WPXXXXU tablets */ #define WPXXXXU_RDESC_ORIG_SIZE 212 -/* - * Fixed WP4030U report descriptor. - * Although the hardware might actually support it, the mouse description - * has been removed, since there seems to be no devices having one and it - * wouldn't make much sense because of the working area size. - */ +/* Fixed WP4030U report descriptor */ static __u8 wp4030u_rdesc_fixed[] = { 0x05, 0x0D, /* Usage Page (Digitizer), */ 0x09, 0x02, /* Usage (Pen), */ @@ -343,148 +218,14 @@ static __u8 wp8060u_rdesc_fixed[] = { }; /* - * Original WP1062 report descriptor. - * - * Only report ID 9 is actually used. - * - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Pen), ; Pen (02h, application collection) - * Collection (Application), - * Report ID (7), - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (Tip Switch), ; Tip switch (42h, momentary control) - * Usage (Barrel Switch), ; Barrel switch (44h, momentary control) - * Usage (Eraser), ; Eraser (45h, momentary control) - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (3), - * Input (Variable), - * Report Count (3), - * Input (Constant, Variable), - * Usage (In Range), ; In range (32h, momentary control) - * Report Count (1), - * Input (Variable), - * Report Count (1), - * Input (Constant, Variable), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Report Size (16), - * Report Count (1), - * Push, - * Unit Exponent (13), - * Unit (Inch), - * Physical Minimum (0), - * Physical Maximum (10000), - * Logical Maximum (20000), - * Input (Variable), - * Usage (Y), ; Y (31h, dynamic value) - * Physical Maximum (6583), - * Logical Maximum (13166), - * Input (Variable), - * Pop, - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) - * Logical Maximum (1023), - * Input (Variable), - * Report Size (16), - * End Collection, - * End Collection, - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (Mouse), ; Mouse (02h, application collection) - * Collection (Application), - * Report ID (8), - * Usage (Pointer), ; Pointer (01h, physical collection) - * Collection (Physical), - * Usage Page (Button), ; Button (09h) - * Usage Minimum (01h), - * Usage Maximum (03h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Count (3), - * Report Size (1), - * Input (Variable), - * Report Count (5), - * Input (Constant), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Usage (Y), ; Y (31h, dynamic value) - * Usage (Wheel), ; Wheel (38h, dynamic value) - * Usage (00h), - * Logical Minimum (-127), - * Logical Maximum (127), - * Report Size (8), - * Report Count (4), - * Input (Variable, Relative), - * End Collection, - * End Collection, - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (Mouse), ; Mouse (02h, application collection) - * Collection (Application), - * Report ID (9), - * Usage (Pointer), ; Pointer (01h, physical collection) - * Collection (Physical), - * Usage Page (Button), ; Button (09h) - * Usage Minimum (01h), - * Usage Maximum (03h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Count (3), - * Report Size (1), - * Input (Variable), - * Report Count (4), - * Input (Constant), - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (In Range), ; In range (32h, momentary control) - * Report Count (1), - * Input (Variable), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Report Size (16), - * Report Count (1), - * Push, - * Unit Exponent (13), - * Unit (Inch), - * Physical Minimum (0), - * Physical Maximum (10000), - * Logical Maximum (20000), - * Input (Variable), - * Usage (Y), ; Y (31h, dynamic value) - * Physical Maximum (6583), - * Logical Maximum (13166), - * Input (Variable), - * Pop, - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) - * Logical Maximum (1023), - * Report Count (1), - * Report Size (16), - * Input (Variable), - * End Collection, - * End Collection, - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (00h), - * Collection (Application), - * Report ID (4), - * Logical Minimum (0), - * Logical Maximum (255), - * Usage (00h), - * Report Size (8), - * Report Count (3), - * Feature (Variable), - * End Collection + * See WP1062 description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP1062 */ /* Size of the original descriptor of WP1062 tablet */ #define WP1062_RDESC_ORIG_SIZE 254 -/* - * Fixed WP1062 report descriptor. - * - * Removed unused reports, corrected second barrel button usage code, physical - * units. - */ +/* Fixed WP1062 report descriptor */ static __u8 wp1062_rdesc_fixed[] = { 0x05, 0x0D, /* Usage Page (Digitizer), */ 0x09, 0x02, /* Usage (Pen), */ @@ -530,146 +271,14 @@ static __u8 wp1062_rdesc_fixed[] = { }; /* - * Original PF1209 report descriptor. - * - * The descriptor is similar to WPXXXXU descriptors, with an addition of a - * feature report (ID 4) of unknown purpose. - * - * Although the advertised resolution is 4000 LPI the unused report ID - * (taken from WPXXXXU, it seems) states 2000 LPI, but it is probably - * incorrect and is a result of blind copying without understanding. Anyway - * the real logical extents are always scaled to 0..32767, which IMHO spoils - * the precision. - * - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Pen), ; Pen (02h, application collection) - * Collection (Application), - * Report ID (7), - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (Tip Switch), ; Tip switch (42h, momentary control) - * Usage (Barrel Switch), ; Barrel switch (44h, momentary control) - * Usage (Eraser), ; Eraser (45h, momentary control) - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (3), - * Input (Variable), - * Report Count (3), - * Input (Constant, Variable), - * Usage (In Range), ; In range (32h, momentary control) - * Report Count (1), - * Input (Variable), - * Report Count (1), - * Input (Constant, Variable), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Report Size (16), - * Report Count (1), - * Push, - * Unit Exponent (13), - * Unit (Inch^3), - * Physical Minimum (0), - * Physical Maximum (12000), - * Logical Maximum (24000), - * Input (Variable), - * Usage (Y), ; Y (31h, dynamic value) - * Physical Maximum (9000), - * Logical Maximum (18000), - * Input (Variable), - * Pop, - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) - * Logical Maximum (1023), - * Input (Variable), - * Report Size (16), - * End Collection, - * End Collection, - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (Mouse), ; Mouse (02h, application collection) - * Collection (Application), - * Report ID (8), - * Usage (Pointer), ; Pointer (01h, physical collection) - * Collection (Physical), - * Usage Page (Button), ; Button (09h) - * Usage Minimum (01h), - * Usage Maximum (03h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Count (3), - * Report Size (1), - * Input (Variable), - * Report Count (5), - * Input (Constant), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Usage (Y), ; Y (31h, dynamic value) - * Usage (Wheel), ; Wheel (38h, dynamic value) - * Usage (00h), - * Logical Minimum (-127), - * Logical Maximum (127), - * Report Size (8), - * Report Count (4), - * Input (Variable, Relative), - * End Collection, - * End Collection, - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (Mouse), ; Mouse (02h, application collection) - * Collection (Application), - * Report ID (9), - * Usage (Pointer), ; Pointer (01h, physical collection) - * Collection (Physical), - * Usage Page (Button), ; Button (09h) - * Usage Minimum (01h), - * Usage Maximum (03h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Count (3), - * Report Size (1), - * Input (Variable), - * Report Count (5), - * Input (Constant), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Usage (Y), ; Y (31h, dynamic value) - * Logical Minimum (0), - * Logical Maximum (32767), - * Physical Minimum (0), - * Physical Maximum (32767), - * Report Count (2), - * Report Size (16), - * Input (Variable), - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) - * Logical Maximum (1023), - * Report Count (1), - * Report Size (16), - * Input (Variable), - * End Collection, - * End Collection, - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (00h), - * Collection (Application), - * Report ID (4), - * Logical Minimum (0), - * Logical Maximum (255), - * Usage (00h), - * Report Size (8), - * Report Count (3), - * Feature (Variable), - * End Collection + * See PF1209 description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_PF1209 */ /* Size of the original descriptor of PF1209 tablet */ #define PF1209_RDESC_ORIG_SIZE 234 -/* - * Fixed PF1209 report descriptor - * - * The descriptor is fixed similarly to WP5540U and WP8060U, plus the - * feature report is removed, because its purpose is unknown and it is of no - * use to the generic HID driver anyway for now. - */ +/* Fixed PF1209 report descriptor */ static __u8 pf1209_rdesc_fixed[] = { 0x05, 0x0D, /* Usage Page (Digitizer), */ 0x09, 0x02, /* Usage (Pen), */ diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 694545d5bfea..067e2963314c 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -590,6 +590,7 @@ static int wacom_probe(struct hid_device *hdev, wacom_poke(hdev, 1); break; case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH: + sprintf(hdev->name, "%s", "Wacom Intuos4 WL"); wdata->features = 0; wacom_set_features(hdev); break; diff --git a/drivers/hid/hid-waltop.c b/drivers/hid/hid-waltop.c index b3a4163f2e67..2cfd95c4467b 100644 --- a/drivers/hid/hid-waltop.c +++ b/drivers/hid/hid-waltop.c @@ -43,139 +43,14 @@ */ /* - * Original Slim Tablet 5.8 inch report descriptor. - * - * All the reports except the report with ID 16 (the stylus) are unused, - * possibly because the tablet is not configured to, or because they were - * just copied from a more capable model. The full purpose of features - * described for report ID 2 is unknown. - * - * The stylus buttons are described as three bit fields, whereas actually - * it's an "array", i.e. they're reported as button numbers (1, 2 and 3). - * The "eraser" field is not used. There is also a "push" without a "pop" in - * the stylus description. - * - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (Mouse), ; Mouse (02h, application collection) - * Collection (Application), - * Report ID (1), - * Usage (Pointer), ; Pointer (01h, physical collection) - * Collection (Physical), - * Usage Page (Button), ; Button (09h) - * Usage Minimum (01h), - * Usage Maximum (05h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (5), - * Input (Variable), - * Report Size (3), - * Report Count (1), - * Input (Constant, Variable), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Usage (Y), ; Y (31h, dynamic value) - * Usage (Wheel), ; Wheel (38h, dynamic value) - * Logical Minimum (-127), - * Logical Maximum (127), - * Report Size (8), - * Report Count (3), - * Input (Variable, Relative), - * End Collection, - * End Collection, - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Pen), ; Pen (02h, application collection) - * Collection (Application), - * Report ID (2), - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * Usage (Azimuth), ; Azimuth (3Fh, dynamic value) - * Usage (Altitude), ; Altitude (40h, dynamic value) - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (2), - * Feature (Variable), - * End Collection, - * Report ID (5), - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * End Collection, - * Report ID (10), - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (3), - * Input (Variable), - * End Collection, - * Report ID (16), - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (Tip Switch), ; Tip switch (42h, momentary control) - * Usage (Barrel Switch), ; Barrel switch (44h, momentary control) - * Usage (Invert), ; Invert (3Ch, momentary control) - * Usage (Eraser), ; Eraser (45h, momentary control) - * Usage (In Range), ; In range (32h, momentary control) - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (5), - * Input (Variable), - * Report Count (3), - * Input (Constant, Variable), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Report Size (16), - * Report Count (1), - * Push, - * Unit Exponent (13), - * Unit (Inch^3), - * Logical Minimum (0), - * Logical Maximum (10000), - * Physical Minimum (0), - * Physical Maximum (10000), - * Input (Variable), - * Usage (Y), ; Y (31h, dynamic value) - * Logical Maximum (6000), - * Physical Maximum (6000), - * Input (Variable), - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) - * Logical Minimum (0), - * Logical Maximum (1023), - * Physical Minimum (0), - * Physical Maximum (1023), - * Input (Variable), - * End Collection, - * End Collection + * See Slim Tablet 5.8 inch description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Slim_Tablet_5.8%22 */ /* Size of the original report descriptor of Slim Tablet 5.8 inch */ #define SLIM_TABLET_5_8_INCH_RDESC_ORIG_SIZE 222 -/* - * Fixed Slim Tablet 5.8 inch descriptor. - * - * All the reports except the stylus report (ID 16) were removed as unused. - * The stylus buttons description was fixed. - */ +/* Fixed Slim Tablet 5.8 inch descriptor */ static __u8 slim_tablet_5_8_inch_rdesc_fixed[] = { 0x05, 0x0D, /* Usage Page (Digitizer), */ 0x09, 0x02, /* Usage (Pen), */ @@ -224,158 +99,14 @@ static __u8 slim_tablet_5_8_inch_rdesc_fixed[] = { }; /* - * Original Slim Tablet 12.1 inch report descriptor. - * - * The descriptor is similar to the Slim Tablet 5.8 inch descriptor with the - * addition of a keyboard report, seemingly unused. It may have get here - * from a Media Tablet - probably an unimplemented feature. - * - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (Mouse), ; Mouse (02h, application collection) - * Collection (Application), - * Report ID (1), - * Usage (Pointer), ; Pointer (01h, physical collection) - * Collection (Physical), - * Usage Page (Button), ; Button (09h) - * Usage Minimum (01h), - * Usage Maximum (05h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (5), - * Input (Variable), - * Report Size (3), - * Report Count (1), - * Input (Constant, Variable), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Usage (Y), ; Y (31h, dynamic value) - * Usage (Wheel), ; Wheel (38h, dynamic value) - * Logical Minimum (-127), - * Logical Maximum (127), - * Report Size (8), - * Report Count (3), - * Input (Variable, Relative), - * End Collection, - * End Collection, - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Pen), ; Pen (02h, application collection) - * Collection (Application), - * Report ID (2), - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * Usage (Azimuth), ; Azimuth (3Fh, dynamic value) - * Usage (Altitude), ; Altitude (40h, dynamic value) - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (2), - * Feature (Variable), - * End Collection, - * Report ID (5), - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * End Collection, - * Report ID (10), - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (3), - * Input (Variable), - * End Collection, - * Report ID (16), - * Usage (Stylus), ; Stylus (20h, logical collection) - * Collection (Physical), - * Usage (Tip Switch), ; Tip switch (42h, momentary control) - * Usage (Barrel Switch), ; Barrel switch (44h, momentary control) - * Usage (Invert), ; Invert (3Ch, momentary control) - * Usage (Eraser), ; Eraser (45h, momentary control) - * Usage (In Range), ; In range (32h, momentary control) - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (5), - * Input (Variable), - * Report Count (3), - * Input (Constant, Variable), - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (X), ; X (30h, dynamic value) - * Report Size (16), - * Report Count (1), - * Push, - * Unit Exponent (13), - * Unit (Inch^3), - * Logical Minimum (0), - * Logical Maximum (20000), - * Physical Minimum (0), - * Physical Maximum (20000), - * Input (Variable), - * Usage (Y), ; Y (31h, dynamic value) - * Logical Maximum (12500), - * Physical Maximum (12500), - * Input (Variable), - * Usage Page (Digitizer), ; Digitizer (0Dh) - * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) - * Logical Minimum (0), - * Logical Maximum (1023), - * Physical Minimum (0), - * Physical Maximum (1023), - * Input (Variable), - * End Collection, - * End Collection, - * Usage Page (Desktop), ; Generic desktop controls (01h) - * Usage (Keyboard), ; Keyboard (06h, application collection) - * Collection (Application), - * Report ID (13), - * Usage Page (Keyboard), ; Keyboard/keypad (07h) - * Usage Minimum (KB Leftcontrol), ; Keyboard left control - * ; (E0h, dynamic value) - * Usage Maximum (KB Right GUI), ; Keyboard right GUI (E7h, dynamic value) - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (8), - * Input (Variable), - * Report Size (8), - * Report Count (1), - * Input (Constant), - * Usage Page (Keyboard), ; Keyboard/keypad (07h) - * Usage Minimum (None), ; No event (00h, selector) - * Usage Maximum (KB Application), ; Keyboard Application (65h, selector) - * Logical Minimum (0), - * Logical Maximum (101), - * Report Size (8), - * Report Count (5), - * Input, - * End Collection + * See Slim Tablet 12.1 inch description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Slim_Tablet_12.1%22 */ /* Size of the original report descriptor of Slim Tablet 12.1 inch */ #define SLIM_TABLET_12_1_INCH_RDESC_ORIG_SIZE 269 -/* - * Fixed Slim Tablet 12.1 inch descriptor. - * - * All the reports except the stylus report (ID 16) were removed as unused. - * The stylus buttons description was fixed. - */ +/* Fixed Slim Tablet 12.1 inch descriptor */ static __u8 slim_tablet_12_1_inch_rdesc_fixed[] = { 0x05, 0x0D, /* Usage Page (Digitizer), */ 0x09, 0x02, /* Usage (Pen), */ @@ -424,217 +155,128 @@ static __u8 slim_tablet_12_1_inch_rdesc_fixed[] = { }; /* - * Original Media Tablet 10.6 inch report descriptor. - * - * There are at least two versions of this model in the wild. They are - * represented by Genius G-Pen M609 (older version) and Genius G-Pen M609X - * (newer version). - * - * Both versions have the usual pen with two barrel buttons and two - * identical wheels with center buttons in the top corners of the tablet - * base. They also have buttons on the top, between the wheels, for - * selecting the wheels' functions and wide/standard mode. In the wide mode - * the whole working surface is sensed, in the standard mode a narrower area - * is sensed, but the logical report extents remain the same. These modes - * correspond roughly to 16:9 and 4:3 aspect ratios respectively. - * - * The older version has three wheel function buttons ("scroll", "zoom" and - * "volume") and two separate buttons for wide and standard mode. The newer - * version has four wheel function buttons (plus "brush") and only one - * button is used for selecting wide/standard mode. So, the total number of - * buttons remains the same, but one of the mode buttons is repurposed as a - * wheels' function button in the newer version. - * - * The wheel functions are: - * scroll - the wheels act as scroll wheels, the center buttons switch - * between vertical and horizontal scrolling; - * zoom - the wheels zoom in/out, the buttons supposedly reset to 100%; - * volume - the wheels control the sound volume, the buttons mute; - * brush - the wheels are supposed to control brush width in a graphics - * editor, the buttons do nothing. - * - * Below is the newer version's report descriptor. It may very well be that - * the older version's descriptor is different and thus it won't be - * supported. - * - * The mouse report (ID 1) only uses the wheel field for reporting the tablet - * wheels' scroll mode. The keyboard report (ID 13) is used to report the - * wheels' zoom and brush control functions as key presses. The report ID 12 - * is used to report the wheels' volume control functions. The stylus report - * (ID 16) has the same problems as the Slim Tablet 5.8 inch report has. - * - * The rest of the reports are unused, at least in the default configuration. - * The purpose of the features is unknown. - * - * Usage Page (Desktop), - * Usage (Mouse), - * Collection (Application), - * Report ID (1), - * Usage (Pointer), - * Collection (Physical), - * Usage Page (Button), - * Usage Minimum (01h), - * Usage Maximum (05h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (5), - * Input (Variable), - * Report Size (3), - * Report Count (1), - * Input (Constant, Variable), - * Usage Page (Desktop), - * Usage (X), - * Usage (Y), - * Usage (Wheel), - * Logical Minimum (-127), - * Logical Maximum (127), - * Report Size (8), - * Report Count (3), - * Input (Variable, Relative), - * End Collection, - * End Collection, - * Usage Page (Digitizer), - * Usage (Pen), - * Collection (Application), - * Report ID (2), - * Usage (Stylus), - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * Usage (Azimuth), - * Usage (Altitude), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (2), - * Feature (Variable), - * End Collection, - * Report ID (5), - * Usage Page (Digitizer), - * Usage (Stylus), - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * End Collection, - * Report ID (10), - * Usage Page (Digitizer), - * Usage (Stylus), - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * End Collection, - * Report ID (16), - * Usage (Stylus), - * Collection (Physical), - * Usage (Tip Switch), - * Usage (Barrel Switch), - * Usage (Invert), - * Usage (Eraser), - * Usage (In Range), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (5), - * Input (Variable), - * Report Count (3), - * Input (Constant, Variable), - * Usage Page (Desktop), - * Usage (X), - * Report Size (16), - * Report Count (1), - * Push, - * Unit Exponent (13), - * Unit (Inch^3), - * Logical Minimum (0), - * Logical Maximum (18000), - * Physical Minimum (0), - * Physical Maximum (18000), - * Input (Variable), - * Usage (Y), - * Logical Maximum (11000), - * Physical Maximum (11000), - * Input (Variable), - * Usage Page (Digitizer), - * Usage (Tip Pressure), - * Logical Minimum (0), - * Logical Maximum (1023), - * Physical Minimum (0), - * Physical Maximum (1023), - * Input (Variable), - * End Collection, - * End Collection, - * Usage Page (Desktop), - * Usage (Keyboard), - * Collection (Application), - * Report ID (13), - * Usage Page (Keyboard), - * Usage Minimum (KB Leftcontrol), - * Usage Maximum (KB Right GUI), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (8), - * Input (Variable), - * Report Size (8), - * Report Count (1), - * Input (Constant), - * Usage Page (Keyboard), - * Usage Minimum (None), - * Usage Maximum (KB Application), - * Logical Minimum (0), - * Logical Maximum (101), - * Report Size (8), - * Report Count (5), - * Input, - * End Collection, - * Usage Page (Consumer), - * Usage (Consumer Control), - * Collection (Application), - * Report ID (12), - * Usage (Volume Inc), - * Usage (Volume Dec), - * Usage (Mute), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (3), - * Input (Variable, Relative), - * Report Size (5), - * Report Count (1), - * Input (Constant, Variable, Relative), - * End Collection + * See Q Pad description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Q_Pad */ -/* Size of the original report descriptor of Media Tablet 10.6 inch */ -#define MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE 300 +/* Size of the original report descriptor of Q Pad */ +#define Q_PAD_RDESC_ORIG_SIZE 241 + +/* Fixed Q Pad descriptor */ +static __u8 q_pad_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x10, /* Report ID (16), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x15, 0x01, /* Logical Minimum (1), */ + 0x25, 0x03, /* Logical Maximum (3), */ + 0x75, 0x04, /* Report Size (4), */ + 0x95, 0x01, /* Report Count (1), */ + 0x80, /* Input, */ + 0x09, 0x32, /* Usage (In Range), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x70, 0x17, /* Physical Maximum (6000), */ + 0x26, 0x00, 0x30, /* Logical Maximum (12288), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x94, 0x11, /* Physical Maximum (4500), */ + 0x26, 0x00, 0x24, /* Logical Maximum (9216), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; /* - * Fixed Media Tablet 10.6 inch descriptor. - * - * The descriptions of reports unused in the default configuration are - * removed. The stylus report (ID 16) is fixed similarly to Slim Tablet 5.8 - * inch. The unused mouse report (ID 1) fields are replaced with constant - * padding. - * - * The keyboard report (ID 13) is hacked to instead have an "array" field - * reporting consumer page controls, and all the unused bits are masked out - * with constant padding. The "brush" wheels' function is represented as "Scan - * Previous/Next Track" controls due to the lack of brush controls in the - * usage tables specification. + * See description, device and HID report descriptors of tablet with PID 0038 at + * http://sf.net/apps/mediawiki/digimend/?title=Waltop_PID_0038 + */ + +/* Size of the original report descriptor of tablet with PID 0038 */ +#define PID_0038_RDESC_ORIG_SIZE 241 + +/* + * Fixed report descriptor for tablet with PID 0038. + */ +static __u8 pid_0038_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x10, /* Report ID (16), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x15, 0x01, /* Logical Minimum (1), */ + 0x25, 0x03, /* Logical Maximum (3), */ + 0x75, 0x04, /* Report Size (4), */ + 0x95, 0x01, /* Report Count (1), */ + 0x80, /* Input, */ + 0x09, 0x32, /* Usage (In Range), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x2E, 0x22, /* Physical Maximum (8750), */ + 0x26, 0x00, 0x46, /* Logical Maximum (17920), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x82, 0x14, /* Physical Maximum (5250), */ + 0x26, 0x00, 0x2A, /* Logical Maximum (10752), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* + * See Media Tablet 10.6 inch description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Media_Tablet_10.6%22 */ + +/* Size of the original report descriptor of Media Tablet 10.6 inch */ +#define MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE 300 + +/* Fixed Media Tablet 10.6 inch descriptor */ static __u8 media_tablet_10_6_inch_rdesc_fixed[] = { 0x05, 0x0D, /* Usage Page (Digitizer), */ 0x09, 0x02, /* Usage (Pen), */ @@ -745,187 +387,14 @@ static __u8 media_tablet_10_6_inch_rdesc_fixed[] = { }; /* - * Original Media Tablet 14.1 inch report descriptor. - * - * There are at least two versions of this model in the wild. They are - * represented by Genius G-Pen M712 (older version) and Genius G-Pen M712X - * (newer version). The hardware difference between these versions is the same - * as between older and newer versions of Media Tablet 10.6 inch. The report - * descriptors are identical for both versions. - * - * The function, behavior and report descriptor of this tablet is similar to - * that of Media Tablet 10.6 inch. However, there is one more field (with - * Consumer AC Pan usage) in the mouse description. Then the tablet X and Y - * logical extents both get scaled to 0..16383 range (a hardware limit?), - * which kind of defeats the advertised 4000 LPI resolution, considering the - * physical extents of 12x7.25 inches. Plus, reports 5, 10 and 255 are used - * sometimes (while moving the pen) with unknown purpose. Also, the key codes - * generated for zoom in/out are different. - * - * Usage Page (Desktop), - * Usage (Mouse), - * Collection (Application), - * Report ID (1), - * Usage (Pointer), - * Collection (Physical), - * Usage Page (Button), - * Usage Minimum (01h), - * Usage Maximum (05h), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (5), - * Input (Variable), - * Report Size (3), - * Report Count (1), - * Input (Constant, Variable), - * Usage Page (Desktop), - * Usage (X), - * Usage (Y), - * Usage (Wheel), - * Logical Minimum (-127), - * Logical Maximum (127), - * Report Size (8), - * Report Count (3), - * Input (Variable, Relative), - * Usage Page (Consumer), - * Logical Minimum (-127), - * Logical Maximum (127), - * Report Size (8), - * Report Count (1), - * Usage (AC Pan), - * Input (Variable, Relative), - * End Collection, - * End Collection, - * Usage Page (Digitizer), - * Usage (Pen), - * Collection (Application), - * Report ID (2), - * Usage (Stylus), - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * Usage (Azimuth), - * Usage (Altitude), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (2), - * Feature (Variable), - * End Collection, - * Report ID (5), - * Usage Page (Digitizer), - * Usage (Stylus), - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * End Collection, - * Report ID (10), - * Usage Page (Digitizer), - * Usage (Stylus), - * Collection (Physical), - * Usage (00h), - * Logical Minimum (0), - * Logical Maximum (255), - * Report Size (8), - * Report Count (7), - * Input (Variable), - * End Collection, - * Report ID (16), - * Usage (Stylus), - * Collection (Physical), - * Usage (Tip Switch), - * Usage (Barrel Switch), - * Usage (Invert), - * Usage (Eraser), - * Usage (In Range), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (5), - * Input (Variable), - * Report Count (3), - * Input (Constant, Variable), - * Usage Page (Desktop), - * Usage (X), - * Report Size (16), - * Report Count (1), - * Push, - * Unit Exponent (13), - * Unit (Inch^3), - * Logical Minimum (0), - * Logical Maximum (16383), - * Physical Minimum (0), - * Physical Maximum (16383), - * Input (Variable), - * Usage (Y), - * Input (Variable), - * Usage Page (Digitizer), - * Usage (Tip Pressure), - * Logical Minimum (0), - * Logical Maximum (1023), - * Physical Minimum (0), - * Physical Maximum (1023), - * Input (Variable), - * End Collection, - * End Collection, - * Usage Page (Desktop), - * Usage (Keyboard), - * Collection (Application), - * Report ID (13), - * Usage Page (Keyboard), - * Usage Minimum (KB Leftcontrol), - * Usage Maximum (KB Right GUI), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (8), - * Input (Variable), - * Report Size (8), - * Report Count (1), - * Input (Constant), - * Usage Page (Keyboard), - * Usage Minimum (None), - * Usage Maximum (KB Application), - * Logical Minimum (0), - * Logical Maximum (101), - * Report Size (8), - * Report Count (5), - * Input, - * End Collection, - * Usage Page (Consumer), - * Usage (Consumer Control), - * Collection (Application), - * Report ID (12), - * Usage (Volume Inc), - * Usage (Volume Dec), - * Usage (Mute), - * Logical Minimum (0), - * Logical Maximum (1), - * Report Size (1), - * Report Count (3), - * Input (Variable, Relative), - * Report Size (5), - * Report Count (1), - * Input (Constant, Variable, Relative), - * End Collection + * See Media Tablet 14.1 inch description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Media_Tablet_14.1%22 */ /* Size of the original report descriptor of Media Tablet 14.1 inch */ #define MEDIA_TABLET_14_1_INCH_RDESC_ORIG_SIZE 309 -/* - * Fixed Media Tablet 14.1 inch descriptor. - * It is fixed similarly to the Media Tablet 10.6 inch descriptor. - */ +/* Fixed Media Tablet 14.1 inch descriptor */ static __u8 media_tablet_14_1_inch_rdesc_fixed[] = { 0x05, 0x0D, /* Usage Page (Digitizer), */ 0x09, 0x02, /* Usage (Pen), */ @@ -1033,6 +502,47 @@ static __u8 media_tablet_14_1_inch_rdesc_fixed[] = { 0xC0 /* End Collection */ }; +struct waltop_state { + u8 pressure0; + u8 pressure1; +}; + +static int waltop_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + int ret; + struct waltop_state *s; + + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (s == NULL) { + hid_err(hdev, "can't allocate device state\n"); + ret = -ENOMEM; + goto err; + } + + s->pressure0 = 0; + s->pressure1 = 0; + + hid_set_drvdata(hdev, s); + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "parse failed\n"); + goto err; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) { + hid_err(hdev, "hw start failed\n"); + goto err; + } + + return 0; +err: + kfree(s); + return ret; +} + static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { @@ -1049,6 +559,18 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc, *rsize = sizeof(slim_tablet_12_1_inch_rdesc_fixed); } break; + case USB_DEVICE_ID_WALTOP_Q_PAD: + if (*rsize == Q_PAD_RDESC_ORIG_SIZE) { + rdesc = q_pad_rdesc_fixed; + *rsize = sizeof(q_pad_rdesc_fixed); + } + break; + case USB_DEVICE_ID_WALTOP_PID_0038: + if (*rsize == PID_0038_RDESC_ORIG_SIZE) { + rdesc = pid_0038_rdesc_fixed; + *rsize = sizeof(pid_0038_rdesc_fixed); + } + break; case USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH: if (*rsize == MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE) { rdesc = media_tablet_10_6_inch_rdesc_fixed; @@ -1065,12 +587,54 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc, return rdesc; } +static int waltop_raw_event(struct hid_device *hdev, struct hid_report *report, + u8 *data, int size) +{ + /* If this is a pen input report of a tablet with PID 0038 */ + if (hdev->product == USB_DEVICE_ID_WALTOP_PID_0038 && + report->type == HID_INPUT_REPORT && + report->id == 16 && + size == 8) { + struct waltop_state *s = hid_get_drvdata(hdev); + + /* + * Ignore maximum pressure reported when a barrel button is + * pressed. + */ + + /* If a barrel button is pressed */ + if ((data[1] & 0xF) > 1) { + /* Use the last known pressure */ + data[6] = s->pressure0; + data[7] = s->pressure1; + } else { + /* Remember reported pressure */ + s->pressure0 = data[6]; + s->pressure1 = data[7]; + } + } + + return 0; +} + +static void waltop_remove(struct hid_device *hdev) +{ + struct waltop_state *s = hid_get_drvdata(hdev); + + hid_hw_stop(hdev); + kfree(s); +} + static const struct hid_device_id waltop_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, + USB_DEVICE_ID_WALTOP_Q_PAD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, + USB_DEVICE_ID_WALTOP_PID_0038) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) }, @@ -1081,7 +645,10 @@ MODULE_DEVICE_TABLE(hid, waltop_devices); static struct hid_driver waltop_driver = { .name = "waltop", .id_table = waltop_devices, + .probe = waltop_probe, .report_fixup = waltop_report_fixup, + .raw_event = waltop_raw_event, + .remove = waltop_remove, }; static int __init waltop_init(void) diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 0dd0bebac69f..782c63955f29 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -60,6 +60,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET }, @@ -96,6 +97,8 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS }, + { USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X, HID_QUIRK_MULTI_INPUT }, { 0, 0 } }; |