diff options
32 files changed, 588 insertions, 507 deletions
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 7634c27ac562..393d218e4a0c 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -679,6 +679,74 @@ Contact: Sam Ravnborg Level: Advanced +Brightness handling on devices with multiple internal panels +============================================================ + +On x86/ACPI devices there can be multiple backlight firmware interfaces: +(ACPI) video, vendor specific and others. As well as direct/native (PWM) +register programming by the KMS driver. + +To deal with this backlight drivers used on x86/ACPI call +acpi_video_get_backlight_type() which has heuristics (+quirks) to select +which backlight interface to use; and backlight drivers which do not match +the returned type will not register themselves, so that only one backlight +device gets registered (in a single GPU setup, see below). + +At the moment this more or less assumes that there will only +be 1 (internal) panel on a system. + +On systems with 2 panels this may be a problem, depending on +what interface acpi_video_get_backlight_type() selects: + +1. native: in this case the KMS driver is expected to know which backlight + device belongs to which output so everything should just work. +2. video: this does support controlling multiple backlights, but some work + will need to be done to get the output <-> backlight device mapping + +The above assumes both panels will require the same backlight interface type. +Things will break on systems with multiple panels where the 2 panels need +a different type of control. E.g. one panel needs ACPI video backlight control, +where as the other is using native backlight control. Currently in this case +only one of the 2 required backlight devices will get registered, based on +the acpi_video_get_backlight_type() return value. + +If this (theoretical) case ever shows up, then supporting this will need some +work. A possible solution here would be to pass a device and connector-name +to acpi_video_get_backlight_type() so that it can deal with this. + +Note in a way we already have a case where userspace sees 2 panels, +in dual GPU laptop setups with a mux. On those systems we may see +either 2 native backlight devices; or 2 native backlight devices. + +Userspace already has code to deal with this by detecting if the related +panel is active (iow which way the mux between the GPU and the panels +points) and then uses that backlight device. Userspace here very much +assumes a single panel though. It picks only 1 of the 2 backlight devices +and then only uses that one. + +Note that all userspace code (that I know off) is currently hardcoded +to assume a single panel. + +Before the recent changes to not register multiple (e.g. video + native) +/sys/class/backlight devices for a single panel (on a single GPU laptop), +userspace would see multiple backlight devices all controlling the same +backlight. + +To deal with this userspace had to always picks one preferred device under +/sys/class/backlight and will ignore the others. So to support brightness +control on multiple panels userspace will need to be updated too. + +There are plans to allow brightness control through the KMS API by adding +a "display brightness" property to drm_connector objects for panels. This +solves a number of issues with the /sys/class/backlight API, including not +being able to map a sysfs backlight device to a specific connector. Any +userspace changes to add support for brightness control on devices with +multiple panels really should build on top of this new KMS property. + +Contact: Hans de Goede + +Level: Advanced + Outside DRM =========== diff --git a/MAINTAINERS b/MAINTAINERS index 1e1581b90d9d..4f2fa9925116 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14532,6 +14532,7 @@ M: Daniel Dadap <ddadap@nvidia.com> L: platform-driver-x86@vger.kernel.org S: Supported F: drivers/platform/x86/nvidia-wmi-ec-backlight.c +F: include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h NVM EXPRESS DRIVER M: Keith Busch <kbusch@kernel.org> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 7802d8846a8d..44ad4b6bd234 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -212,6 +212,7 @@ config ACPI_VIDEO tristate "Video" depends on BACKLIGHT_CLASS_DEVICE depends on INPUT + depends on ACPI_WMI || !X86 select THERMAL help This driver implements the ACPI Extensions For Display Adapters diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c index 5cbe2196176d..a7c3d11e0dac 100644 --- a/drivers/acpi/acpi_video.c +++ b/drivers/acpi/acpi_video.c @@ -73,6 +73,16 @@ module_param(device_id_scheme, bool, 0444); static int only_lcd = -1; module_param(only_lcd, int, 0444); +/* + * Display probing is known to take up to 5 seconds, so delay the fallback + * backlight registration by 5 seconds + 3 seconds for some extra margin. + */ +static int register_backlight_delay = 8; +module_param(register_backlight_delay, int, 0444); +MODULE_PARM_DESC(register_backlight_delay, + "Delay in seconds before doing fallback (non GPU driver triggered) " + "backlight registration, set to 0 to disable."); + static bool may_report_brightness_keys; static int register_count; static DEFINE_MUTEX(register_count_mutex); @@ -81,7 +91,9 @@ static LIST_HEAD(video_bus_head); static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device); static void acpi_video_bus_notify(struct acpi_device *device, u32 event); -void acpi_video_detect_exit(void); +static void acpi_video_bus_register_backlight_work(struct work_struct *ignored); +static DECLARE_DELAYED_WORK(video_bus_register_backlight_work, + acpi_video_bus_register_backlight_work); /* * Indices in the _BCL method response: the first two items are special, @@ -1859,8 +1871,6 @@ static int acpi_video_bus_register_backlight(struct acpi_video_bus *video) if (video->backlight_registered) return 0; - acpi_video_run_bcl_for_osi(video); - if (acpi_video_get_backlight_type() != acpi_backlight_video) return 0; @@ -2086,7 +2096,11 @@ static int acpi_video_bus_add(struct acpi_device *device) list_add_tail(&video->entry, &video_bus_head); mutex_unlock(&video_list_lock); - acpi_video_bus_register_backlight(video); + /* + * The userspace visible backlight_device gets registered separately + * from acpi_video_register_backlight(). + */ + acpi_video_run_bcl_for_osi(video); acpi_video_bus_add_notify_handler(video); return 0; @@ -2111,20 +2125,25 @@ static int acpi_video_bus_remove(struct acpi_device *device) video = acpi_driver_data(device); - acpi_video_bus_remove_notify_handler(video); - acpi_video_bus_unregister_backlight(video); - acpi_video_bus_put_devices(video); - mutex_lock(&video_list_lock); list_del(&video->entry); mutex_unlock(&video_list_lock); + acpi_video_bus_remove_notify_handler(video); + acpi_video_bus_unregister_backlight(video); + acpi_video_bus_put_devices(video); + kfree(video->attached_array); kfree(video); return 0; } +static void acpi_video_bus_register_backlight_work(struct work_struct *ignored) +{ + acpi_video_register_backlight(); +} + static int __init is_i740(struct pci_dev *dev) { if (dev->device == 0x00D1) @@ -2235,6 +2254,18 @@ int acpi_video_register(void) */ register_count = 1; + /* + * acpi_video_bus_add() skips registering the userspace visible + * backlight_device. The intend is for this to be registered by the + * drm/kms driver calling acpi_video_register_backlight() *after* it is + * done setting up its own native backlight device. The delayed work + * ensures that acpi_video_register_backlight() always gets called + * eventually, in case there is no drm/kms driver or it is disabled. + */ + if (register_backlight_delay) + schedule_delayed_work(&video_bus_register_backlight_work, + register_backlight_delay * HZ); + leave: mutex_unlock(®ister_count_mutex); return ret; @@ -2245,6 +2276,7 @@ void acpi_video_unregister(void) { mutex_lock(®ister_count_mutex); if (register_count) { + cancel_delayed_work_sync(&video_bus_register_backlight_work); acpi_bus_unregister_driver(&acpi_video_bus); register_count = 0; may_report_brightness_keys = false; @@ -2253,19 +2285,16 @@ void acpi_video_unregister(void) } EXPORT_SYMBOL(acpi_video_unregister); -void acpi_video_unregister_backlight(void) +void acpi_video_register_backlight(void) { struct acpi_video_bus *video; - mutex_lock(®ister_count_mutex); - if (register_count) { - mutex_lock(&video_list_lock); - list_for_each_entry(video, &video_bus_head, entry) - acpi_video_bus_unregister_backlight(video); - mutex_unlock(&video_list_lock); - } - mutex_unlock(®ister_count_mutex); + mutex_lock(&video_list_lock); + list_for_each_entry(video, &video_bus_head, entry) + acpi_video_bus_register_backlight(video); + mutex_unlock(&video_list_lock); } +EXPORT_SYMBOL(acpi_video_register_backlight); bool acpi_video_handles_brightness_key_presses(void) { @@ -2302,7 +2331,6 @@ static int __init acpi_video_init(void) static void __exit acpi_video_exit(void) { - acpi_video_detect_exit(); acpi_video_unregister(); } diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 5d7f38016a24..db2474fe58ac 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -17,8 +17,9 @@ * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop, * sony_acpi,... can take care about backlight brightness. * - * Backlight drivers can use acpi_video_get_backlight_type() to determine - * which driver should handle the backlight. + * Backlight drivers can use acpi_video_get_backlight_type() to determine which + * driver should handle the backlight. RAW/GPU-driver backlight drivers must + * use the acpi_video_backlight_use_native() helper for this. * * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) * this file will not be compiled and acpi_video_get_backlight_type() will @@ -27,20 +28,16 @@ #include <linux/export.h> #include <linux/acpi.h> +#include <linux/apple-gmux.h> #include <linux/backlight.h> #include <linux/dmi.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/platform_data/x86/nvidia-wmi-ec-backlight.h> #include <linux/types.h> #include <linux/workqueue.h> #include <acpi/video.h> -void acpi_video_unregister_backlight(void); - -static bool backlight_notifier_registered; -static struct notifier_block backlight_nb; -static struct work_struct backlight_notify_work; - static enum acpi_backlight_type acpi_backlight_cmdline = acpi_backlight_undef; static enum acpi_backlight_type acpi_backlight_dmi = acpi_backlight_undef; @@ -78,6 +75,36 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; } +/* This depends on ACPI_WMI which is X86 only */ +#ifdef CONFIG_X86 +static bool nvidia_wmi_ec_supported(void) +{ + struct wmi_brightness_args args = { + .mode = WMI_BRIGHTNESS_MODE_GET, + .val = 0, + .ret = 0, + }; + struct acpi_buffer buf = { (acpi_size)sizeof(args), &args }; + acpi_status status; + + status = wmi_evaluate_method(WMI_BRIGHTNESS_GUID, 0, + WMI_BRIGHTNESS_METHOD_SOURCE, &buf, &buf); + if (ACPI_FAILURE(status)) + return false; + + /* + * If brightness is handled by the EC then nvidia-wmi-ec-backlight + * should be used, else the GPU driver(s) should be used. + */ + return args.ret == WMI_BRIGHTNESS_SOURCE_EC; +} +#else +static bool nvidia_wmi_ec_supported(void) +{ + return false; +} +#endif + /* Force to use vendor driver when the ACPI device is known to be * buggy */ static int video_detect_force_vendor(const struct dmi_system_id *d) @@ -105,63 +132,143 @@ static int video_detect_force_none(const struct dmi_system_id *d) } static const struct dmi_system_id video_detect_dmi_table[] = { - /* On Samsung X360, the BIOS will set a flag (VDRV) if generic - * ACPI backlight device is used. This flag will definitively break - * the backlight interface (even the vendor interface) until next - * reboot. It's why we should prevent video.ko from being used here - * and we can't rely on a later call to acpi_video_unregister(). - */ { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1128309 */ .callback = video_detect_force_vendor, - /* X360 */ + /* Acer KAV80 */ .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X360"), - DMI_MATCH(DMI_BOARD_NAME, "X360"), + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"), }, }, { - .callback = video_detect_force_vendor, - /* Asus UL30VT */ - .matches = { + .callback = video_detect_force_vendor, + /* Asus UL30VT */ + .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"), }, }, { - .callback = video_detect_force_vendor, - /* Asus UL30A */ - .matches = { + .callback = video_detect_force_vendor, + /* Asus UL30A */ + .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"), }, }, { - .callback = video_detect_force_vendor, - /* GIGABYTE GB-BXBT-2807 */ - .matches = { + .callback = video_detect_force_vendor, + /* Asus X55U */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X55U"), + }, + }, + { + .callback = video_detect_force_vendor, + /* Asus X101CH */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X101CH"), + }, + }, + { + .callback = video_detect_force_vendor, + /* Asus X401U */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X401U"), + }, + }, + { + .callback = video_detect_force_vendor, + /* Asus X501U */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X501U"), + }, + }, + { + .callback = video_detect_force_vendor, + /* Asus 1015CX */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "1015CX"), + }, + }, + { + .callback = video_detect_force_vendor, + /* GIGABYTE GB-BXBT-2807 */ + .matches = { DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), DMI_MATCH(DMI_PRODUCT_NAME, "GB-BXBT-2807"), }, }, { - .callback = video_detect_force_vendor, - /* Sony VPCEH3U1E */ - .matches = { + .callback = video_detect_force_vendor, + /* Samsung N150/N210/N220 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"), + DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"), + }, + }, + { + .callback = video_detect_force_vendor, + /* Samsung NF110/NF210/NF310 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"), + DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"), + }, + }, + { + .callback = video_detect_force_vendor, + /* Samsung NC210 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"), + DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"), + }, + }, + { + .callback = video_detect_force_vendor, + /* Sony VPCEH3U1E */ + .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VPCEH3U1E"), }, }, { - .callback = video_detect_force_vendor, - /* Xiaomi Mi Pad 2 */ - .matches = { + .callback = video_detect_force_vendor, + /* Xiaomi Mi Pad 2 */ + .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"), DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"), }, }, /* + * Toshiba models with Transflective display, these need to use + * the toshiba_acpi vendor driver for proper Transflective handling. + */ + { + .callback = video_detect_force_vendor, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R500"), + }, + }, + { + .callback = video_detect_force_vendor, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R600"), + }, + }, + + /* * These models have a working acpi_video backlight control, and using * native backlight causes a regression where backlight does not work * when userspace is not handling brightness key events. Disable @@ -390,130 +497,119 @@ static const struct dmi_system_id video_detect_dmi_table[] = { }, }, { - /* https://bugzilla.kernel.org/show_bug.cgi?id=207835 */ + /* https://bugzilla.redhat.com/show_bug.cgi?id=1012674 */ .callback = video_detect_force_native, - /* Acer TravelMate 5735Z */ + /* Acer Aspire 5741 */ .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5735Z"), - DMI_MATCH(DMI_BOARD_NAME, "BA51_MV"), + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"), }, }, { - .callback = video_detect_force_native, - /* ASUSTeK COMPUTER INC. GA401 */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "GA401"), - }, - }, - { - .callback = video_detect_force_native, - /* ASUSTeK COMPUTER INC. GA502 */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "GA502"), + /* https://bugzilla.kernel.org/show_bug.cgi?id=42993 */ + .callback = video_detect_force_native, + /* Acer Aspire 5750 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5750"), }, }, { - .callback = video_detect_force_native, - /* ASUSTeK COMPUTER INC. GA503 */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "GA503"), + /* https://bugzilla.kernel.org/show_bug.cgi?id=42833 */ + .callback = video_detect_force_native, + /* Acer Extensa 5235 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5235"), }, }, - /* - * Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a - * working native and video interface. However the default detection - * mechanism first registers the video interface before unregistering - * it again and switching to the native interface during boot. This - * results in a dangling SBIOS request for backlight change for some - * reason, causing the backlight to switch to ~2% once per boot on the - * first power cord connect or disconnect event. Setting the native - * interface explicitly circumvents this buggy behaviour, by avoiding - * the unregistering process. - */ { - .callback = video_detect_force_native, - .ident = "Clevo NL5xRU", - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"), + .callback = video_detect_force_native, + /* Acer TravelMate 4750 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4750"), }, }, { - .callback = video_detect_force_native, - .ident = "Clevo NL5xRU", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"), - DMI_MATCH(DMI_BOARD_NAME, "AURA1501"), + /* https://bugzilla.kernel.org/show_bug.cgi?id=207835 */ + .callback = video_detect_force_native, + /* Acer TravelMate 5735Z */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5735Z"), + DMI_MATCH(DMI_BOARD_NAME, "BA51_MV"), }, }, { - .callback = video_detect_force_native, - .ident = "Clevo NL5xRU", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"), - DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"), + /* https://bugzilla.kernel.org/show_bug.cgi?id=36322 */ + .callback = video_detect_force_native, + /* Acer TravelMate 5760 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5760"), }, }, { - .callback = video_detect_force_native, - .ident = "Clevo NL5xNU", - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"), + .callback = video_detect_force_native, + /* ASUSTeK COMPUTER INC. GA401 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "GA401"), }, }, - /* - * The TongFang PF5PU1G, PF4NU1F, PF5NU1G, and PF5LUXG/TUXEDO BA15 Gen10, - * Pulse 14/15 Gen1, and Pulse 15 Gen2 have the same problem as the Clevo - * NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2. See the description - * above. - */ { - .callback = video_detect_force_native, - .ident = "TongFang PF5PU1G", - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "PF5PU1G"), + .callback = video_detect_force_native, + /* ASUSTeK COMPUTER INC. GA502 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "GA502"), }, }, { - .callback = video_detect_force_native, - .ident = "TongFang PF4NU1F", - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "PF4NU1F"), + .callback = video_detect_force_native, + /* ASUSTeK COMPUTER INC. GA503 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "GA503"), }, }, { - .callback = video_detect_force_native, - .ident = "TongFang PF4NU1F", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"), - DMI_MATCH(DMI_BOARD_NAME, "PULSE1401"), + .callback = video_detect_force_native, + /* Asus UX303UB */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "UX303UB"), }, }, { - .callback = video_detect_force_native, - .ident = "TongFang PF5NU1G", - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "PF5NU1G"), + .callback = video_detect_force_native, + /* Samsung N150P */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N150P"), + DMI_MATCH(DMI_BOARD_NAME, "N150P"), }, }, { - .callback = video_detect_force_native, - .ident = "TongFang PF5NU1G", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"), - DMI_MATCH(DMI_BOARD_NAME, "PULSE1501"), + .callback = video_detect_force_native, + /* Samsung N145P/N250P/N260P */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"), + DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"), }, }, { - .callback = video_detect_force_native, - .ident = "TongFang PF5LUXG", - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "PF5LUXG"), + .callback = video_detect_force_native, + /* Samsung N250P */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N250P"), + DMI_MATCH(DMI_BOARD_NAME, "N250P"), }, }, + /* * Desktops which falsely report a backlight and which our heuristics * for this do not catch. @@ -537,43 +633,15 @@ static const struct dmi_system_id video_detect_dmi_table[] = { { }, }; -/* This uses a workqueue to avoid various locking ordering issues */ -static void acpi_video_backlight_notify_work(struct work_struct *work) -{ - if (acpi_video_get_backlight_type() != acpi_backlight_video) - acpi_video_unregister_backlight(); -} - -static int acpi_video_backlight_notify(struct notifier_block *nb, - unsigned long val, void *bd) -{ - struct backlight_device *backlight = bd; - - /* A raw bl registering may change video -> native */ - if (backlight->props.type == BACKLIGHT_RAW && - val == BACKLIGHT_REGISTERED) - schedule_work(&backlight_notify_work); - - return NOTIFY_OK; -} - /* * Determine which type of backlight interface to use on this system, * First check cmdline, then dmi quirks, then do autodetect. - * - * The autodetect order is: - * 1) Is the acpi-video backlight interface supported -> - * no, use a vendor interface - * 2) Is this a win8 "ready" BIOS and do we have a native interface -> - * yes, use a native interface - * 3) Else use the acpi-video interface - * - * Arguably the native on win8 check should be done first, but that would - * be a behavior change, which may causes issues. */ -enum acpi_backlight_type acpi_video_get_backlight_type(void) +static enum acpi_backlight_type __acpi_video_get_backlight_type(bool native) { static DEFINE_MUTEX(init_mutex); + static bool nvidia_wmi_ec_present; + static bool native_available; static bool init_done; static long video_caps; @@ -585,48 +653,60 @@ enum acpi_backlight_type acpi_video_get_backlight_type(void) acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, find_video, NULL, &video_caps, NULL); - INIT_WORK(&backlight_notify_work, - acpi_video_backlight_notify_work); - backlight_nb.notifier_call = acpi_video_backlight_notify; - backlight_nb.priority = 0; - if (backlight_register_notifier(&backlight_nb) == 0) - backlight_notifier_registered = true; + nvidia_wmi_ec_present = nvidia_wmi_ec_supported(); init_done = true; } + if (native) + native_available = true; mutex_unlock(&init_mutex); + /* + * The below heuristics / detection steps are in order of descending + * presedence. The commandline takes presedence over anything else. + */ if (acpi_backlight_cmdline != acpi_backlight_undef) return acpi_backlight_cmdline; + /* DMI quirks override any autodetection. */ if (acpi_backlight_dmi != acpi_backlight_undef) return acpi_backlight_dmi; - if (!(video_caps & ACPI_VIDEO_BACKLIGHT)) - return acpi_backlight_vendor; + /* Special cases such as nvidia_wmi_ec and apple gmux. */ + if (nvidia_wmi_ec_present) + return acpi_backlight_nvidia_wmi_ec; - if (acpi_osi_is_win8() && backlight_device_get_by_type(BACKLIGHT_RAW)) - return acpi_backlight_native; + if (apple_gmux_present()) + return acpi_backlight_apple_gmux; + + /* On systems with ACPI video use either native or ACPI video. */ + if (video_caps & ACPI_VIDEO_BACKLIGHT) { + /* + * Windows 8 and newer no longer use the ACPI video interface, + * so it often does not work. If the ACPI tables are written + * for win8 and native brightness ctl is available, use that. + * + * The native check deliberately is inside the if acpi-video + * block on older devices without acpi-video support native + * is usually not the best choice. + */ + if (acpi_osi_is_win8() && native_available) + return acpi_backlight_native; + else + return acpi_backlight_video; + } - return acpi_backlight_video; + /* No ACPI video (old hw), use vendor specific fw methods. */ + return acpi_backlight_vendor; } -EXPORT_SYMBOL(acpi_video_get_backlight_type); -/* - * Set the preferred backlight interface type based on DMI info. - * This function allows DMI blacklists to be implemented by external - * platform drivers instead of putting a big blacklist in video_detect.c - */ -void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type) +enum acpi_backlight_type acpi_video_get_backlight_type(void) { - acpi_backlight_dmi = type; - /* Remove acpi-video backlight interface if it is no longer desired */ - if (acpi_video_get_backlight_type() != acpi_backlight_video) - acpi_video_unregister_backlight(); + return __acpi_video_get_backlight_type(false); } -EXPORT_SYMBOL(acpi_video_set_dmi_backlight_type); +EXPORT_SYMBOL(acpi_video_get_backlight_type); -void __exit acpi_video_detect_exit(void) +bool acpi_video_backlight_use_native(void) { - if (backlight_notifier_registered) - backlight_unregister_notifier(&backlight_nb); + return __acpi_video_get_backlight_type(true) == acpi_backlight_native; } +EXPORT_SYMBOL(acpi_video_backlight_use_native); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 2f52e8941074..198ba846d34b 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -235,6 +235,13 @@ config DRM_RADEON select HWMON select BACKLIGHT_CLASS_DEVICE select INTERVAL_TREE + # radeon depends on ACPI_VIDEO when ACPI is enabled, for select to work + # ACPI_VIDEO's dependencies must also be selected. + select INPUT if ACPI + select ACPI_VIDEO if ACPI + # On x86 ACPI_VIDEO also needs ACPI_WMI + select X86_PLATFORM_DEVICES if ACPI && X86 + select ACPI_WMI if ACPI && X86 help Choose this option if you have an ATI Radeon graphics card. There are both PCI and AGP versions. You don't need to choose this to @@ -260,6 +267,13 @@ config DRM_AMDGPU select BACKLIGHT_CLASS_DEVICE select INTERVAL_TREE select DRM_BUDDY + # amdgpu depends on ACPI_VIDEO when ACPI is enabled, for select to work + # ACPI_VIDEO's dependencies must also be selected. + select INPUT if ACPI + select ACPI_VIDEO if ACPI + # On x86 ACPI_VIDEO also needs ACPI_WMI + select X86_PLATFORM_DEVICES if ACPI && X86 + select ACPI_WMI if ACPI && X86 help Choose this option if you have a recent AMD Radeon graphics card. diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c b/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c index fa7421afb9a6..6be9ac2b9c5b 100644 --- a/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c +++ b/drivers/gpu/drm/amd/amdgpu/atombios_encoders.c @@ -26,6 +26,8 @@ #include <linux/pci.h> +#include <acpi/video.h> + #include <drm/drm_crtc_helper.h> #include <drm/amdgpu_drm.h> #include "amdgpu.h" @@ -182,7 +184,12 @@ void amdgpu_atombios_encoder_init_backlight(struct amdgpu_encoder *amdgpu_encode return; if (!(adev->mode_info.firmware_flags & ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU)) - return; + goto register_acpi_backlight; + + if (!acpi_video_backlight_use_native()) { + drm_info(dev, "Skipping amdgpu atom DIG backlight registration\n"); + goto register_acpi_backlight; + } pdata = kmalloc(sizeof(struct amdgpu_backlight_privdata), GFP_KERNEL); if (!pdata) { @@ -218,6 +225,11 @@ void amdgpu_atombios_encoder_init_backlight(struct amdgpu_encoder *amdgpu_encode error: kfree(pdata); return; + +register_acpi_backlight: + /* Try registering an ACPI video backlight device instead. */ + acpi_video_register_backlight(); + return; } void diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 7a93162633ae..7b19f444624c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -90,6 +90,8 @@ #include <drm/drm_gem_atomic_helper.h> #include <drm/drm_plane_helper.h> +#include <acpi/video.h> + #include "ivsrcid/dcn/irqsrcs_dcn_1_0.h" #include "dcn/dcn_1_0_offset.h" @@ -4032,6 +4034,13 @@ amdgpu_dm_register_backlight_device(struct amdgpu_display_manager *dm) amdgpu_dm_update_backlight_caps(dm, dm->num_of_edps); dm->brightness[dm->num_of_edps] = AMDGPU_MAX_BL_LEVEL; + if (!acpi_video_backlight_use_native()) { + drm_info(adev_to_drm(dm->adev), "Skipping amdgpu DM backlight registration\n"); + /* Try registering an ACPI video backlight device instead. */ + acpi_video_register_backlight(); + return; + } + props.max_brightness = AMDGPU_MAX_BL_LEVEL; props.brightness = AMDGPU_MAX_BL_LEVEL; props.type = BACKLIGHT_RAW; diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..807b989e3c77 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -7,6 +7,8 @@ config DRM_GMA500 select ACPI_VIDEO if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI + select X86_PLATFORM_DEVICES if ACPI + select ACPI_WMI if ACPI help Say yes for an experimental 2D KMS framebuffer driver for the Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig index 7ae3b7d67fcf..3efce05d7b57 100644 --- a/drivers/gpu/drm/i915/Kconfig +++ b/drivers/gpu/drm/i915/Kconfig @@ -23,6 +23,8 @@ config DRM_I915 # but for select to work, need to select ACPI_VIDEO's dependencies, ick select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI + select X86_PLATFORM_DEVICES if ACPI + select ACPI_WMI if ACPI select ACPI_VIDEO if ACPI select ACPI_BUTTON if ACPI select SYNC_FILE diff --git a/drivers/gpu/drm/i915/display/intel_acpi.c b/drivers/gpu/drm/i915/display/intel_acpi.c index e78430001f07..9df78e7caa2b 100644 --- a/drivers/gpu/drm/i915/display/intel_acpi.c +++ b/drivers/gpu/drm/i915/display/intel_acpi.c @@ -7,6 +7,7 @@ #include <linux/pci.h> #include <linux/acpi.h> +#include <acpi/video.h> #include "i915_drv.h" #include "intel_acpi.h" @@ -331,3 +332,29 @@ void intel_acpi_assign_connector_fwnodes(struct drm_i915_private *i915) */ fwnode_handle_put(fwnode); } + +void intel_acpi_video_register(struct drm_i915_private *i915) +{ + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + + acpi_video_register(); + + /* + * If i915 is driving an internal panel without registering its native + * backlight handler try to register the acpi_video backlight. + * For panels not driven by i915 another GPU driver may still register + * a native backlight later and acpi_video_register_backlight() should + * only be called after any native backlights have been registered. + */ + drm_connector_list_iter_begin(&i915->drm, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + struct intel_panel *panel = &to_intel_connector(connector)->panel; + + if (panel->backlight.funcs && !panel->backlight.device) { + acpi_video_register_backlight(); + break; + } + } + drm_connector_list_iter_end(&conn_iter); +} diff --git a/drivers/gpu/drm/i915/display/intel_acpi.h b/drivers/gpu/drm/i915/display/intel_acpi.h index 4a760a2baed9..6a0007452f95 100644 --- a/drivers/gpu/drm/i915/display/intel_acpi.h +++ b/drivers/gpu/drm/i915/display/intel_acpi.h @@ -14,6 +14,7 @@ void intel_unregister_dsm_handler(void); void intel_dsm_get_bios_data_funcs_supported(struct drm_i915_private *i915); void intel_acpi_device_id_update(struct drm_i915_private *i915); void intel_acpi_assign_connector_fwnodes(struct drm_i915_private *i915); +void intel_acpi_video_register(struct drm_i915_private *i915); #else static inline void intel_register_dsm_handler(void) { return; } static inline void intel_unregister_dsm_handler(void) { return; } @@ -23,6 +24,8 @@ static inline void intel_acpi_device_id_update(struct drm_i915_private *i915) { return; } static inline void intel_acpi_assign_connector_fwnodes(struct drm_i915_private *i915) { return; } +static inline +void intel_acpi_video_register(struct drm_i915_private *i915) { return; } #endif /* CONFIG_ACPI */ #endif /* __INTEL_ACPI_H__ */ diff --git a/drivers/gpu/drm/i915/display/intel_backlight.c b/drivers/gpu/drm/i915/display/intel_backlight.c index 110fc98ec280..84639e9df5c9 100644 --- a/drivers/gpu/drm/i915/display/intel_backlight.c +++ b/drivers/gpu/drm/i915/display/intel_backlight.c @@ -8,6 +8,8 @@ #include <linux/pwm.h> #include <linux/string_helpers.h> +#include <acpi/video.h> + #include "intel_backlight.h" #include "intel_connector.h" #include "intel_de.h" @@ -950,6 +952,11 @@ int intel_backlight_device_register(struct intel_connector *connector) WARN_ON(panel->backlight.max == 0); + if (!acpi_video_backlight_use_native()) { + drm_info(&i915->drm, "Skipping intel_backlight registration\n"); + return 0; + } + memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_RAW; diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index f4f7c3414762..40fbf8a296e2 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -9089,7 +9089,7 @@ void intel_display_driver_register(struct drm_i915_private *i915) /* Must be done after probing outputs */ intel_opregion_register(i915); - acpi_video_register(); + intel_acpi_video_register(i915); intel_audio_init(i915); diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index 6140db756d06..8cf096f841a9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -386,3 +386,13 @@ nouveau_acpi_edid(struct drm_device *dev, struct drm_connector *connector) return kmemdup(edid, EDID_LENGTH, GFP_KERNEL); } + +bool nouveau_acpi_video_backlight_use_native(void) +{ + return acpi_video_backlight_use_native(); +} + +void nouveau_acpi_video_register_backlight(void) +{ + acpi_video_register_backlight(); +} diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.h b/drivers/gpu/drm/nouveau/nouveau_acpi.h index 330f9b837066..e39dd8b94b8b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.h +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.h @@ -11,6 +11,8 @@ void nouveau_register_dsm_handler(void); void nouveau_unregister_dsm_handler(void); void nouveau_switcheroo_optimus_dsm(void); void *nouveau_acpi_edid(struct drm_device *, struct drm_connector *); +bool nouveau_acpi_video_backlight_use_native(void); +void nouveau_acpi_video_register_backlight(void); #else static inline bool nouveau_is_optimus(void) { return false; }; static inline bool nouveau_is_v1_dsm(void) { return false; }; @@ -18,6 +20,8 @@ static inline void nouveau_register_dsm_handler(void) {} static inline void nouveau_unregister_dsm_handler(void) {} static inline void nouveau_switcheroo_optimus_dsm(void) {} static inline void *nouveau_acpi_edid(struct drm_device *dev, struct drm_connector *connector) { return NULL; } +static inline bool nouveau_acpi_video_backlight_use_native(void) { return true; } +static inline void nouveau_acpi_video_register_backlight(void) {} #endif #endif diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c index a2141d3d9b1d..a614582779ca 100644 --- a/drivers/gpu/drm/nouveau/nouveau_backlight.c +++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c @@ -38,6 +38,7 @@ #include "nouveau_reg.h" #include "nouveau_encoder.h" #include "nouveau_connector.h" +#include "nouveau_acpi.h" static struct ida bl_ida; #define BL_NAME_SIZE 15 // 12 for name + 2 for digits + 1 for '\0' @@ -405,6 +406,11 @@ nouveau_backlight_init(struct drm_connector *connector) goto fail_alloc; } + if (!nouveau_acpi_video_backlight_use_native()) { + NV_INFO(drm, "Skipping nv_backlight registration\n"); + goto fail_alloc; + } + if (!nouveau_get_backlight_name(backlight_name, bl)) { NV_ERROR(drm, "Failed to retrieve a unique name for the backlight interface\n"); goto fail_alloc; @@ -430,6 +436,13 @@ nouveau_backlight_init(struct drm_connector *connector) fail_alloc: kfree(bl); + /* + * If we get here we have an internal panel, but no nv_backlight, + * try registering an ACPI video backlight device instead. + */ + if (ret == 0) + nouveau_acpi_video_register_backlight(); + return ret; } diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 0eae05dfb385..c841c273222e 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -32,6 +32,8 @@ #include <drm/drm_file.h> #include <drm/radeon_drm.h> +#include <acpi/video.h> + #include "atom.h" #include "radeon_atombios.h" #include "radeon.h" @@ -209,6 +211,11 @@ void radeon_atom_backlight_init(struct radeon_encoder *radeon_encoder, if (!(rdev->mode_info.firmware_flags & ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU)) return; + if (!acpi_video_backlight_use_native()) { + drm_info(dev, "Skipping radeon atom DIG backlight registration\n"); + return; + } + pdata = kmalloc(sizeof(struct radeon_backlight_privdata), GFP_KERNEL); if (!pdata) { DRM_ERROR("Memory allocation failed\n"); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 35c535e48b8d..fbc0a2182318 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -30,6 +30,8 @@ #include <drm/drm_device.h> #include <drm/radeon_drm.h> +#include <acpi/video.h> + #include "radeon.h" #include "radeon_atombios.h" #include "radeon_legacy_encoders.h" @@ -167,7 +169,7 @@ static void radeon_encoder_add_backlight(struct radeon_encoder *radeon_encoder, return; if (radeon_backlight == 0) { - return; + use_bl = false; } else if (radeon_backlight == 1) { use_bl = true; } else if (radeon_backlight == -1) { @@ -193,6 +195,13 @@ static void radeon_encoder_add_backlight(struct radeon_encoder *radeon_encoder, else radeon_legacy_backlight_init(radeon_encoder, connector); } + + /* + * If there is no native backlight device (which may happen even when + * use_bl==true) try registering an ACPI video backlight device instead. + */ + if (!rdev->mode_info.bl_encoder) + acpi_video_register_backlight(); } void diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 1a66fb969ee7..0cd32c65456c 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -33,6 +33,8 @@ #include <drm/drm_util.h> #include <drm/radeon_drm.h> +#include <acpi/video.h> + #include "radeon.h" #include "radeon_asic.h" #include "radeon_legacy_encoders.h" @@ -387,6 +389,11 @@ void radeon_legacy_backlight_init(struct radeon_encoder *radeon_encoder, return; #endif + if (!acpi_video_backlight_use_native()) { + drm_info(dev, "Skipping radeon legacy LVDS backlight registration\n"); + return; + } + pdata = kmalloc(sizeof(struct radeon_backlight_privdata), GFP_KERNEL); if (!pdata) { DRM_ERROR("Memory allocation failed\n"); diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f2f98e942cf2..0cc5ac35fc57 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -93,6 +93,7 @@ config PEAQ_WMI config NVIDIA_WMI_EC_BACKLIGHT tristate "EC Backlight Driver for Hybrid Graphics Notebook Systems" + depends on ACPI_VIDEO depends on ACPI_WMI depends on BACKLIGHT_CLASS_DEVICE help diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index e0230ea0cb7e..b933a5165edb 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -643,69 +643,6 @@ static const struct dmi_system_id non_acer_quirks[] __initconst = { {} }; -static int __init -video_set_backlight_video_vendor(const struct dmi_system_id *d) -{ - interface->capability &= ~ACER_CAP_BRIGHTNESS; - pr_info("Brightness must be controlled by generic video driver\n"); - return 0; -} - -static const struct dmi_system_id video_vendor_dmi_table[] __initconst = { - { - .callback = video_set_backlight_video_vendor, - .ident = "Acer TravelMate 4750", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4750"), - }, - }, - { - .callback = video_set_backlight_video_vendor, - .ident = "Acer Extensa 5235", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5235"), - }, - }, - { - .callback = video_set_backlight_video_vendor, - .ident = "Acer TravelMate 5760", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5760"), - }, - }, - { - .callback = video_set_backlight_video_vendor, - .ident = "Acer Aspire 5750", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5750"), - }, - }, - { - .callback = video_set_backlight_video_vendor, - .ident = "Acer Aspire 5741", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"), - }, - }, - { - /* - * Note no video_set_backlight_video_vendor, we must use the - * acer interface, as there is no native backlight interface. - */ - .ident = "Acer KAV80", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"), - }, - }, - {} -}; - /* Find which quirks are needed for a particular vendor/ model pair */ static void __init find_quirks(void) { @@ -2477,9 +2414,6 @@ static int __init acer_wmi_init(void) set_quirks(); - if (dmi_check_system(video_vendor_dmi_table)) - acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); - if (acpi_video_get_backlight_type() != acpi_backlight_vendor) interface->capability &= ~ACER_CAP_BRIGHTNESS; diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index ffe98a18440b..ca33df7ea550 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -21,7 +21,6 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/vga_switcheroo.h> -#include <acpi/video.h> #include <asm/io.h> /** @@ -694,7 +693,6 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) * backlight control and supports more levels than other options. * Disable the other backlight choices. */ - acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); apple_bl_unregister(); gmux_data->power_state = VGA_SWITCHEROO_ON; @@ -804,7 +802,6 @@ static void gmux_remove(struct pnp_dev *pnp) apple_gmux_data = NULL; kfree(gmux_data); - acpi_video_register(); apple_bl_register(); } diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c index 478dd300b9c9..bbfed85051ee 100644 --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -79,12 +79,10 @@ static struct quirk_entry quirk_asus_q500a = { /* * For those machines that need software to control bt/wifi status - * and can't adjust brightness through ACPI interface * and have duplicate events(ACPI and WMI) for display toggle */ static struct quirk_entry quirk_asus_x55u = { .wapf = 4, - .wmi_backlight_power = true, .wmi_backlight_set_devstate = true, .no_display_toggle = true, }; @@ -99,11 +97,6 @@ static struct quirk_entry quirk_asus_x200ca = { .wmi_backlight_set_devstate = true, }; -static struct quirk_entry quirk_asus_ux303ub = { - .wmi_backlight_native = true, - .wmi_backlight_set_devstate = true, -}; - static struct quirk_entry quirk_asus_x550lb = { .wmi_backlight_set_devstate = true, .xusb2pr = 0x01D9, @@ -147,11 +140,6 @@ static const struct dmi_system_id asus_quirks[] = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "U32U"), }, - /* - * Note this machine has a Brazos APU, and most Brazos Asus - * machines need quirk_asus_x55u / wmi_backlight_power but - * here acpi-video seems to work fine for backlight control. - */ .driver_data = &quirk_asus_wapf4, }, { @@ -381,15 +369,6 @@ static const struct dmi_system_id asus_quirks[] = { }, { .callback = dmi_matched, - .ident = "ASUSTeK COMPUTER INC. UX303UB", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "UX303UB"), - }, - .driver_data = &quirk_asus_ux303ub, - }, - { - .callback = dmi_matched, .ident = "ASUSTeK COMPUTER INC. UX330UAK", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 89b604e04d7f..434249ac47a5 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -3553,7 +3553,6 @@ static int asus_wmi_add(struct platform_device *pdev) struct platform_driver *pdrv = to_platform_driver(pdev->dev.driver); struct asus_wmi_driver *wdrv = to_asus_wmi_driver(pdrv); struct asus_wmi *asus; - const char *chassis_type; acpi_status status; int err; u32 result; @@ -3635,18 +3634,6 @@ static int asus_wmi_add(struct platform_device *pdev) if (asus->driver->quirks->wmi_force_als_set) asus_wmi_set_als(); - /* Some Asus desktop boards export an acpi-video backlight interface, - stop this from showing up */ - chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE); - if (chassis_type && !strcmp(chassis_type, "3")) - acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); - - if (asus->driver->quirks->wmi_backlight_power) - acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); - - if (asus->driver->quirks->wmi_backlight_native) - acpi_video_set_dmi_backlight_type(acpi_backlight_native); - if (asus->driver->quirks->xusb2pr) asus_wmi_set_xusb2pr(asus); diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h index b302415bf1d9..f30252efe1db 100644 --- a/drivers/platform/x86/asus-wmi.h +++ b/drivers/platform/x86/asus-wmi.h @@ -29,8 +29,6 @@ struct quirk_entry { bool hotplug_wireless; bool scalar_panel_brightness; bool store_backlight_power; - bool wmi_backlight_power; - bool wmi_backlight_native; bool wmi_backlight_set_devstate; bool wmi_force_als_set; bool use_kbd_dock_devid; diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c index ce86d84ee796..32d9f0ba6be3 100644 --- a/drivers/platform/x86/eeepc-wmi.c +++ b/drivers/platform/x86/eeepc-wmi.c @@ -96,11 +96,6 @@ static struct quirk_entry quirk_asus_et2012_type3 = { .store_backlight_power = true, }; -static struct quirk_entry quirk_asus_x101ch = { - /* We need this when ACPI function doesn't do this well */ - .wmi_backlight_power = true, -}; - static struct quirk_entry *quirks; static void et2012_quirks(void) @@ -151,25 +146,7 @@ static const struct dmi_system_id asus_quirks[] = { }, .driver_data = &quirk_asus_unknown, }, - { - .callback = dmi_matched, - .ident = "ASUSTeK Computer INC. X101CH", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "X101CH"), - }, - .driver_data = &quirk_asus_x101ch, - }, - { - .callback = dmi_matched, - .ident = "ASUSTeK Computer INC. 1015CX", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "1015CX"), - }, - .driver_data = &quirk_asus_x101ch, - }, - {}, + {} }; static void eeepc_wmi_key_filter(struct asus_wmi_driver *asus_wmi, int *code, diff --git a/drivers/platform/x86/nvidia-wmi-ec-backlight.c b/drivers/platform/x86/nvidia-wmi-ec-backlight.c index 61e37194df70..baccdf658538 100644 --- a/drivers/platform/x86/nvidia-wmi-ec-backlight.c +++ b/drivers/platform/x86/nvidia-wmi-ec-backlight.c @@ -7,73 +7,10 @@ #include <linux/backlight.h> #include <linux/mod_devicetable.h> #include <linux/module.h> +#include <linux/platform_data/x86/nvidia-wmi-ec-backlight.h> #include <linux/types.h> #include <linux/wmi.h> - -/** - * enum wmi_brightness_method - WMI method IDs - * @WMI_BRIGHTNESS_METHOD_LEVEL: Get/Set EC brightness level status - * @WMI_BRIGHTNESS_METHOD_SOURCE: Get/Set EC Brightness Source - */ -enum wmi_brightness_method { - WMI_BRIGHTNESS_METHOD_LEVEL = 1, - WMI_BRIGHTNESS_METHOD_SOURCE = 2, - WMI_BRIGHTNESS_METHOD_MAX -}; - -/** - * enum wmi_brightness_mode - Operation mode for WMI-wrapped method - * @WMI_BRIGHTNESS_MODE_GET: Get the current brightness level/source. - * @WMI_BRIGHTNESS_MODE_SET: Set the brightness level. - * @WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL: Get the maximum brightness level. This - * is only valid when the WMI method is - * %WMI_BRIGHTNESS_METHOD_LEVEL. - */ -enum wmi_brightness_mode { - WMI_BRIGHTNESS_MODE_GET = 0, - WMI_BRIGHTNESS_MODE_SET = 1, - WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL = 2, - WMI_BRIGHTNESS_MODE_MAX -}; - -/** - * enum wmi_brightness_source - Backlight brightness control source selection - * @WMI_BRIGHTNESS_SOURCE_GPU: Backlight brightness is controlled by the GPU. - * @WMI_BRIGHTNESS_SOURCE_EC: Backlight brightness is controlled by the - * system's Embedded Controller (EC). - * @WMI_BRIGHTNESS_SOURCE_AUX: Backlight brightness is controlled over the - * DisplayPort AUX channel. - */ -enum wmi_brightness_source { - WMI_BRIGHTNESS_SOURCE_GPU = 1, - WMI_BRIGHTNESS_SOURCE_EC = 2, - WMI_BRIGHTNESS_SOURCE_AUX = 3, - WMI_BRIGHTNESS_SOURCE_MAX -}; - -/** - * struct wmi_brightness_args - arguments for the WMI-wrapped ACPI method - * @mode: Pass in an &enum wmi_brightness_mode value to select between - * getting or setting a value. - * @val: In parameter for value to set when using %WMI_BRIGHTNESS_MODE_SET - * mode. Not used in conjunction with %WMI_BRIGHTNESS_MODE_GET or - * %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL mode. - * @ret: Out parameter returning retrieved value when operating in - * %WMI_BRIGHTNESS_MODE_GET or %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL - * mode. Not used in %WMI_BRIGHTNESS_MODE_SET mode. - * @ignored: Padding; not used. The ACPI method expects a 24 byte params struct. - * - * This is the parameters structure for the WmiBrightnessNotify ACPI method as - * wrapped by WMI. The value passed in to @val or returned by @ret will be a - * brightness value when the WMI method ID is %WMI_BRIGHTNESS_METHOD_LEVEL, or - * an &enum wmi_brightness_source value with %WMI_BRIGHTNESS_METHOD_SOURCE. - */ -struct wmi_brightness_args { - u32 mode; - u32 val; - u32 ret; - u32 ignored[3]; -}; +#include <acpi/video.h> /** * wmi_brightness_notify() - helper function for calling WMI-wrapped ACPI method @@ -151,19 +88,10 @@ static int nvidia_wmi_ec_backlight_probe(struct wmi_device *wdev, const void *ct { struct backlight_properties props = {}; struct backlight_device *bdev; - u32 source; int ret; - ret = wmi_brightness_notify(wdev, WMI_BRIGHTNESS_METHOD_SOURCE, - WMI_BRIGHTNESS_MODE_GET, &source); - if (ret) - return ret; - - /* - * This driver is only to be used when brightness control is handled - * by the EC; otherwise, the GPU driver(s) should control brightness. - */ - if (source != WMI_BRIGHTNESS_SOURCE_EC) + /* drivers/acpi/video_detect.c also checks that SOURCE == EC */ + if (acpi_video_get_backlight_type() != acpi_backlight_nvidia_wmi_ec) return -ENODEV; /* @@ -191,8 +119,6 @@ static int nvidia_wmi_ec_backlight_probe(struct wmi_device *wdev, const void *ct return PTR_ERR_OR_ZERO(bdev); } -#define WMI_BRIGHTNESS_GUID "603E9613-EF25-4338-A3D0-C46177516DB7" - static const struct wmi_device_id nvidia_wmi_ec_backlight_id_table[] = { { .guid_string = WMI_BRIGHTNESS_GUID }, { } diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index c187dcdf82f0..cc30cf08f32d 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -356,23 +356,13 @@ struct samsung_laptop { }; struct samsung_quirks { - bool broken_acpi_video; bool four_kbd_backlight_levels; bool enable_kbd_backlight; - bool use_native_backlight; bool lid_handling; }; static struct samsung_quirks samsung_unknown = {}; -static struct samsung_quirks samsung_broken_acpi_video = { - .broken_acpi_video = true, -}; - -static struct samsung_quirks samsung_use_native_backlight = { - .use_native_backlight = true, -}; - static struct samsung_quirks samsung_np740u3e = { .four_kbd_backlight_levels = true, .enable_kbd_backlight = true, @@ -1542,76 +1532,6 @@ static const struct dmi_system_id samsung_dmi_table[] __initconst = { /* Specific DMI ids for laptop with quirks */ { .callback = samsung_dmi_matched, - .ident = "N150P", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N150P"), - DMI_MATCH(DMI_BOARD_NAME, "N150P"), - }, - .driver_data = &samsung_use_native_backlight, - }, - { - .callback = samsung_dmi_matched, - .ident = "N145P/N250P/N260P", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"), - DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"), - }, - .driver_data = &samsung_use_native_backlight, - }, - { - .callback = samsung_dmi_matched, - .ident = "N150/N210/N220", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"), - DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"), - }, - .driver_data = &samsung_broken_acpi_video, - }, - { - .callback = samsung_dmi_matched, - .ident = "NF110/NF210/NF310", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"), - DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"), - }, - .driver_data = &samsung_broken_acpi_video, - }, - { - .callback = samsung_dmi_matched, - .ident = "X360", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X360"), - DMI_MATCH(DMI_BOARD_NAME, "X360"), - }, - .driver_data = &samsung_broken_acpi_video, - }, - { - .callback = samsung_dmi_matched, - .ident = "N250P", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N250P"), - DMI_MATCH(DMI_BOARD_NAME, "N250P"), - }, - .driver_data = &samsung_use_native_backlight, - }, - { - .callback = samsung_dmi_matched, - .ident = "NC210", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"), - DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"), - }, - .driver_data = &samsung_broken_acpi_video, - }, - { - .callback = samsung_dmi_matched, .ident = "730U3E/740U3E", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), @@ -1654,15 +1574,8 @@ static int __init samsung_init(void) samsung->handle_backlight = true; samsung->quirks = quirks; -#ifdef CONFIG_ACPI - if (samsung->quirks->broken_acpi_video) - acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); - if (samsung->quirks->use_native_backlight) - acpi_video_set_dmi_backlight_type(acpi_backlight_native); - if (acpi_video_get_backlight_type() != acpi_backlight_vendor) samsung->handle_backlight = false; -#endif ret = samsung_platform_init(samsung); if (ret) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 0fc9e8b8827b..030dc37d50b8 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -272,14 +272,6 @@ static const struct key_entry toshiba_acpi_alt_keymap[] = { }; /* - * List of models which have a broken acpi-video backlight interface and thus - * need to use the toshiba (vendor) interface instead. - */ -static const struct dmi_system_id toshiba_vendor_backlight_dmi[] = { - {} -}; - -/* * Utility */ @@ -2881,14 +2873,6 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev) return 0; } - /* - * Tell acpi-video-detect code to prefer vendor backlight on all - * systems with transflective backlight and on dmi matched systems. - */ - if (dev->tr_backlight_supported || - dmi_check_system(toshiba_vendor_backlight_dmi)) - acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); - if (acpi_video_get_backlight_type() != acpi_backlight_vendor) return 0; diff --git a/include/acpi/video.h b/include/acpi/video.h index db8548ff03ce..a275c35e5249 100644 --- a/include/acpi/video.h +++ b/include/acpi/video.h @@ -48,15 +48,18 @@ enum acpi_backlight_type { acpi_backlight_video, acpi_backlight_vendor, acpi_backlight_native, + acpi_backlight_nvidia_wmi_ec, + acpi_backlight_apple_gmux, }; #if IS_ENABLED(CONFIG_ACPI_VIDEO) extern int acpi_video_register(void); extern void acpi_video_unregister(void); +extern void acpi_video_register_backlight(void); extern int acpi_video_get_edid(struct acpi_device *device, int type, int device_id, void **edid); extern enum acpi_backlight_type acpi_video_get_backlight_type(void); -extern void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type); +extern bool acpi_video_backlight_use_native(void); /* * Note: The value returned by acpi_video_handles_brightness_key_presses() * may change over time and should not be cached. @@ -68,6 +71,7 @@ extern int acpi_video_get_levels(struct acpi_device *device, #else static inline int acpi_video_register(void) { return -ENODEV; } static inline void acpi_video_unregister(void) { return; } +static inline void acpi_video_register_backlight(void) { return; } static inline int acpi_video_get_edid(struct acpi_device *device, int type, int device_id, void **edid) { @@ -77,8 +81,9 @@ static inline enum acpi_backlight_type acpi_video_get_backlight_type(void) { return acpi_backlight_vendor; } -static inline void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type) +static inline bool acpi_video_backlight_use_native(void) { + return true; } static inline bool acpi_video_handles_brightness_key_presses(void) { diff --git a/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h b/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h new file mode 100644 index 000000000000..23d60130272c --- /dev/null +++ b/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved. + */ + +#ifndef __PLATFORM_DATA_X86_NVIDIA_WMI_EC_BACKLIGHT_H +#define __PLATFORM_DATA_X86_NVIDIA_WMI_EC_BACKLIGHT_H + +#define WMI_BRIGHTNESS_GUID "603E9613-EF25-4338-A3D0-C46177516DB7" + +/** + * enum wmi_brightness_method - WMI method IDs + * @WMI_BRIGHTNESS_METHOD_LEVEL: Get/Set EC brightness level status + * @WMI_BRIGHTNESS_METHOD_SOURCE: Get/Set EC Brightness Source + */ +enum wmi_brightness_method { + WMI_BRIGHTNESS_METHOD_LEVEL = 1, + WMI_BRIGHTNESS_METHOD_SOURCE = 2, + WMI_BRIGHTNESS_METHOD_MAX +}; + +/** + * enum wmi_brightness_mode - Operation mode for WMI-wrapped method + * @WMI_BRIGHTNESS_MODE_GET: Get the current brightness level/source. + * @WMI_BRIGHTNESS_MODE_SET: Set the brightness level. + * @WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL: Get the maximum brightness level. This + * is only valid when the WMI method is + * %WMI_BRIGHTNESS_METHOD_LEVEL. + */ +enum wmi_brightness_mode { + WMI_BRIGHTNESS_MODE_GET = 0, + WMI_BRIGHTNESS_MODE_SET = 1, + WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL = 2, + WMI_BRIGHTNESS_MODE_MAX +}; + +/** + * enum wmi_brightness_source - Backlight brightness control source selection + * @WMI_BRIGHTNESS_SOURCE_GPU: Backlight brightness is controlled by the GPU. + * @WMI_BRIGHTNESS_SOURCE_EC: Backlight brightness is controlled by the + * system's Embedded Controller (EC). + * @WMI_BRIGHTNESS_SOURCE_AUX: Backlight brightness is controlled over the + * DisplayPort AUX channel. + */ +enum wmi_brightness_source { + WMI_BRIGHTNESS_SOURCE_GPU = 1, + WMI_BRIGHTNESS_SOURCE_EC = 2, + WMI_BRIGHTNESS_SOURCE_AUX = 3, + WMI_BRIGHTNESS_SOURCE_MAX +}; + +/** + * struct wmi_brightness_args - arguments for the WMI-wrapped ACPI method + * @mode: Pass in an &enum wmi_brightness_mode value to select between + * getting or setting a value. + * @val: In parameter for value to set when using %WMI_BRIGHTNESS_MODE_SET + * mode. Not used in conjunction with %WMI_BRIGHTNESS_MODE_GET or + * %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL mode. + * @ret: Out parameter returning retrieved value when operating in + * %WMI_BRIGHTNESS_MODE_GET or %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL + * mode. Not used in %WMI_BRIGHTNESS_MODE_SET mode. + * @ignored: Padding; not used. The ACPI method expects a 24 byte params struct. + * + * This is the parameters structure for the WmiBrightnessNotify ACPI method as + * wrapped by WMI. The value passed in to @val or returned by @ret will be a + * brightness value when the WMI method ID is %WMI_BRIGHTNESS_METHOD_LEVEL, or + * an &enum wmi_brightness_source value with %WMI_BRIGHTNESS_METHOD_SOURCE. + */ +struct wmi_brightness_args { + u32 mode; + u32 val; + u32 ret; + u32 ignored[3]; +}; + +#endif |