diff options
415 files changed, 2371 insertions, 3041 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9277237810e9..de89df1e9c21 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -196,7 +196,8 @@ config VECTORS_BASE The base address of exception vectors. config ARM_PATCH_PHYS_VIRT - bool "Patch physical to virtual translations at runtime" + bool "Patch physical to virtual translations at runtime" if EMBEDDED + default y depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help @@ -205,16 +206,25 @@ config ARM_PATCH_PHYS_VIRT kernel in system memory. This can only be used with non-XIP MMU kernels where the base - of physical memory is at a 16MB boundary, or theoretically 64K - for the MSM machine class. + of physical memory is at a 16MB boundary. -config ARM_PATCH_PHYS_VIRT_16BIT - def_bool y - depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM + Only disable this option if you know that you do not require + this feature (eg, building a kernel for a single machine) and + you need to shrink the kernel to the minimal size. + +config NEED_MACH_MEMORY_H + bool help - This option extends the physical to virtual translation patching - to allow physical memory down to a theoretical minimum of 64K - boundaries. + Select this when mach/memory.h is required to provide special + definitions for this platform. The need for mach/memory.h should + be avoided when possible. + +config PHYS_OFFSET + hex "Physical address of main memory" + depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + help + Please provide the physical address corresponding to the + location of main memory in your system. source "init/Kconfig" @@ -247,6 +257,7 @@ config ARCH_INTEGRATOR select GENERIC_CLOCKEVENTS select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ + select NEED_MACH_MEMORY_H help Support for ARM's Integrator platform. @@ -262,6 +273,7 @@ config ARCH_REALVIEW select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB + select NEED_MACH_MEMORY_H help This enables support for ARM Ltd RealView boards. @@ -302,7 +314,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP - select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -323,6 +334,7 @@ config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x-based" select CPU_ARM720T select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Cirrus Logic 711x/721x based boards. @@ -363,6 +375,7 @@ config ARCH_EBSA110 select ISA select NO_IOPORT select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -378,6 +391,7 @@ config ARCH_EP93XX select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_USES_GETTIMEOFFSET + select NEED_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -386,6 +400,7 @@ config ARCH_FOOTBRIDGE select CPU_SA110 select FOOTBRIDGE select GENERIC_CLOCKEVENTS + select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -435,6 +450,7 @@ config ARCH_IOP13XX select PCI select ARCH_SUPPORTS_MSI select VMSPLIT_1G + select NEED_MACH_MEMORY_H help Support for Intel's IOP13XX (XScale) family of processors. @@ -465,6 +481,7 @@ config ARCH_IXP23XX select CPU_XSC3 select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Intel's IXP23xx (XScale) family of processors. @@ -474,6 +491,7 @@ config ARCH_IXP2000 select CPU_XSCALE select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -567,6 +585,7 @@ config ARCH_KS8695 select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -658,6 +677,7 @@ config ARCH_SHMOBILE select SPARSE_IRQ select MULTI_IRQ_HANDLER select PM_GENERIC_DOMAINS if PM + select NEED_MACH_MEMORY_H help Support for Renesas's SH-Mobile and R-Mobile ARM platforms. @@ -672,6 +692,7 @@ config ARCH_RPC select NO_IOPORT select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -690,6 +711,7 @@ config ARCH_SA1100 select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB + select NEED_MACH_MEMORY_H help Support for StrongARM 11x0 based boards. @@ -782,6 +804,7 @@ config ARCH_S5PV210 select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_MEMORY_H help Samsung S5PV210/S5PC110 series based systems @@ -798,6 +821,7 @@ config ARCH_EXYNOS4 select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_MEMORY_H help Samsung EXYNOS4 series based systems @@ -809,6 +833,7 @@ config ARCH_SHARK select ZONE_DMA select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -837,6 +862,8 @@ config ARCH_U300 select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select NEED_MACH_MEMORY_H help Support for ST-Ericsson U300 series mobile platforms. @@ -1987,6 +2014,7 @@ config CPU_FREQ_PXA bool depends on CPU_FREQ && ARCH_PXA && PXA25x default y + select CPU_FREQ_TABLE select CPU_FREQ_DEFAULT_GOV_USERSPACE config CPU_FREQ_S3C diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 70c424eaf7b0..5665c2a3b652 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -128,6 +128,9 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif +textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index e5818668d091..0e225b86b652 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -66,5 +66,6 @@ cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + support-8bit; }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 64cedca6fc79..a72299b8e668 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -25,4 +25,8 @@ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; + + sdhci@c8000600 { + support-8bit; + }; }; diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index a07b0e763a80..1cde34a080d7 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -12,11 +12,11 @@ */ #include <linux/device.h> +#include <linux/gpio.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <asm/gpio.h> #include <asm/hardware/scoop.h> /* PCMCIA to Scoop linkage diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig new file mode 100644 index 000000000000..c5876d244f4b --- /dev/null +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -0,0 +1,214 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9G45=y +CONFIG_MACH_AT91SAM9M10G45EK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_UACCESS_WITH_MEMCPY=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_IPV6_SIT_6RD=y +CONFIG_CFG80211=y +CONFIG_LIB80211=y +CONFIG_MAC80211=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_DAVICOM_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_AT76C50X_USB=m +CONFIG_USB_ZD1201=m +CONFIG_RTL8187=m +CONFIG_ATH_COMMON=m +CONFIG_ATH9K=m +CONFIG_CARL9170=m +CONFIG_B43=m +CONFIG_B43_PHY_N=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RTL8192CU=m +CONFIG_WL1251=m +CONFIG_WL1251_SDIO=m +CONFIG_WL12XX_MENU=m +CONFIG_WL12XX=m +CONFIG_WL12XX_SDIO=m +CONFIG_ZD1211RW=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272 +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_QT1070=m +CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y +# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_FB=y +CONFIG_FB_ATMEL=y +CONFIG_FB_UDL=m +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_ATMEL_AC97C=y +# CONFIG_SND_SPI is not set +CONFIG_SND_USB_AUDIO=m +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ATMEL_USBA=m +CONFIG_USB_ZERO=m +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_EEM=y +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_USB_G_MULTI=m +CONFIG_USB_G_MULTI_CDC=y +CONFIG_MMC=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_SDIO_UART=m +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_ATMELMCI_DMA=y +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_DMADEVICES=y +CONFIG_AT_HDMAC=y +CONFIG_DMATEST=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 166a7a3e2840..11ad0bfbb0ad 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -4,4 +4,23 @@ /* not all ARM platforms necessarily support this API ... */ #include <mach/gpio.h> +#ifndef __ARM_GPIOLIB_COMPLEX +/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */ +#include <asm-generic/gpio.h> + +/* The trivial gpiolib dispatchers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#endif + +/* + * Provide a default gpio_to_irq() which should satisfy every case. + * However, some platforms want to do this differently, so allow them + * to override it. + */ +#ifndef gpio_to_irq +#define gpio_to_irq __gpio_to_irq +#endif + #endif /* _ARCH_ARM_GPIO_H */ diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h index b69d972b1f7d..9eda7dc92ad8 100644 --- a/arch/arm/include/asm/hardware/iop3xx-gpio.h +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -28,6 +28,8 @@ #include <mach/hardware.h> #include <asm-generic/gpio.h> +#define __ARM_GPIOLIB_COMPLEX + #define IOP3XX_N_GPIOS 8 static inline int gpio_get_value(unsigned gpio) diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index b3fea38d55c6..43cab498bc27 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -9,7 +9,7 @@ #ifndef __ASM_HARDWARE_IT8152_H #define __ASM_HARDWARE_IT8152_H -extern unsigned long it8152_base_address; +extern void __iomem *it8152_base_address; #define IT8152_IO_BASE (it8152_base_address + 0x03e00000) #define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 652fccca4952..a8997d71084e 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -16,9 +16,12 @@ #include <linux/compiler.h> #include <linux/const.h> #include <linux/types.h> -#include <mach/memory.h> #include <asm/sizes.h> +#ifdef CONFIG_NEED_MACH_MEMORY_H +#include <mach/memory.h> +#endif + /* * Allow for constants defined here to be used from assembly code * by prepending the UL suffix only with actual C code compilation. @@ -151,7 +154,6 @@ * so that all we need to do is modify the 8-bit constant field. */ #define __PV_BITS_31_24 0x81000000 -#define __PV_BITS_23_16 0x00810000 extern unsigned long __pv_phys_offset; #define PHYS_OFFSET __pv_phys_offset @@ -169,9 +171,6 @@ static inline unsigned long __virt_to_phys(unsigned long x) { unsigned long t; __pv_stub(x, t, "add", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "add", __PV_BITS_23_16); -#endif return t; } @@ -179,9 +178,6 @@ static inline unsigned long __phys_to_virt(unsigned long x) { unsigned long t; __pv_stub(x, t, "sub", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "sub", __PV_BITS_23_16); -#endif return t; } #else @@ -191,7 +187,11 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #ifndef PHYS_OFFSET +#ifdef PLAT_PHYS_OFFSET #define PHYS_OFFSET PLAT_PHYS_OFFSET +#else +#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) +#endif #endif /* diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 543b44916d2c..6c6809f982f1 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -31,11 +31,7 @@ struct mod_arch_specific { /* Add __virt_to_phys patching state as well */ #ifdef CONFIG_ARM_PATCH_PHYS_VIRT -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT -#define MODULE_ARCH_VERMAGIC_P2V "p2v16 " -#else #define MODULE_ARCH_VERMAGIC_P2V "p2v8 " -#endif #else #define MODULE_ARCH_VERMAGIC_P2V "" #endif diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index bcd66e00bdbe..b7685f1bb04a 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -22,7 +22,7 @@ #if defined(CONFIG_DEBUG_ICEDCC) @@ debug using ARM EmbeddedICE DCC channel - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp .endm #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) @@ -106,7 +106,7 @@ #ifdef CONFIG_MMU .macro addruart_current, rx, tmp1, tmp2 - addruart \tmp1, \tmp2 + addruart \tmp1, \tmp2, \rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 moveq \rx, \tmp1 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 742b6108a001..673c806cc106 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -95,7 +95,7 @@ ENTRY(stext) sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) add r8, r8, r4 @ PHYS_OFFSET #else - ldr r8, =PLAT_PHYS_OFFSET + ldr r8, =PHYS_OFFSET @ always constant in this case #endif /* @@ -234,7 +234,7 @@ __create_page_tables: * This allows debug messages to be output * via a serial console before paging_init. */ - addruart r7, r3 + addruart r7, r3, r0 mov r3, r3, lsr #20 mov r3, r3, lsl #2 @@ -488,13 +488,8 @@ __fixup_pv_table: add r5, r5, r3 @ adjust table end address add r7, r7, r3 @ adjust __pv_phys_offset address str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset -#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT mov r6, r3, lsr #24 @ constant for add/sub instructions teq r3, r6, lsl #24 @ must be 16MiB aligned -#else - mov r6, r3, lsr #16 @ constant for add/sub instructions - teq r3, r6, lsl #16 @ must be 64kiB aligned -#endif THUMB( it ne @ cross section branch ) bne __error str r6, [r7, #4] @ save to __pv_offset @@ -510,20 +505,8 @@ ENDPROC(__fixup_pv_table) .text __fixup_a_pv_table: #ifdef CONFIG_THUMB2_KERNEL -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - lsls r0, r6, #24 - lsr r6, #8 - beq 1f - clz r7, r0 - lsr r0, #24 - lsl r0, r7 - bic r0, 0x0080 - lsrs r7, #1 - orrcs r0, #0x0080 - orr r0, r0, r7, lsl #12 -#endif -1: lsls r6, #24 - beq 4f + lsls r6, #24 + beq 2f clz r7, r6 lsr r6, #24 lsl r6, r7 @@ -532,43 +515,25 @@ __fixup_a_pv_table: orrcs r6, #0x0080 orr r6, r6, r7, lsl #12 orr r6, #0x4000 - b 4f -2: @ at this point the C flag is always clear - add r7, r3 -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - ldrh ip, [r7] - tst ip, 0x0400 @ the i bit tells us LS or MS byte - beq 3f - cmp r0, #0 @ set C flag, and ... - biceq ip, 0x0400 @ immediate zero value has a special encoding - streqh ip, [r7] @ that requires the i bit cleared -#endif -3: ldrh ip, [r7, #2] + b 2f +1: add r7, r3 + ldrh ip, [r7, #2] and ip, 0x8f00 - orrcc ip, r6 @ mask in offset bits 31-24 - orrcs ip, r0 @ mask in offset bits 23-16 + orr ip, r6 @ mask in offset bits 31-24 strh ip, [r7, #2] -4: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b bx lr #else -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - and r0, r6, #255 @ offset bits 23-16 - mov r6, r6, lsr #8 @ offset bits 31-24 -#else - mov r0, #0 @ just in case... -#endif - b 3f -2: ldr ip, [r7, r3] + b 2f +1: ldr ip, [r7, r3] bic ip, ip, #0x000000ff - tst ip, #0x400 @ rotate shift tells us LS or MS byte - orrne ip, ip, r6 @ mask in offset bits 31-24 - orreq ip, ip, r0 @ mask in offset bits 23-16 + orr ip, ip, r6 @ mask in offset bits 31-24 str ip, [r7, r3] -3: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b mov pc, lr #endif ENDPROC(__fixup_a_pv_table) diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index dba0d8d8a4bd..f87f5040e78e 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -16,6 +16,7 @@ #include <asm/mach/irq.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -23,7 +24,6 @@ #include <mach/board.h> #include <mach/cpu.h> -#include <mach/gpio.h> #include <mach/at91cap9.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7227755ffec6..978be950035a 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -14,11 +14,11 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 39f81f47b4ba..a53b3de9daa2 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -13,11 +13,11 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include <mach/at91sam9260.h> #include <mach/at91sam9260_matrix.h> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 0f917928eeb7..4e647b653339 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -14,6 +14,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -21,7 +22,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9261.h> #include <mach/at91sam9261_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index a050f41fc860..dd7662bc395f 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -20,7 +21,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 600bffb01edb..c3dfb1b3b1e3 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> @@ -21,7 +22,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index aacb19dc9225..305a851b5bff 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -10,6 +10,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -17,7 +18,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9rl.h> #include <mach/at91sam9rl_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 5aa58851eb39..367d5cd5e362 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -34,7 +35,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index b0c796d42e49..0487ea10c2d6 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -25,6 +25,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -43,7 +44,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index d1abd5898e85..747b2eaa9737 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -38,7 +39,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 679b0b743e92..062670351a6a 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -41,7 +42,6 @@ #include <asm/mach/map.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index c578c5d90728..774c87fcbd5b 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -35,7 +36,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index f4da8a16d5dc..fc885a4ce243 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -40,7 +41,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2d919f5a4f57..d35e65b08ccd 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -36,7 +37,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 17654d5e94e6..c3936665e645 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -38,7 +39,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 72b55674616c..586100e2acbb 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -20,6 +20,7 @@ #include <linux/types.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -35,7 +36,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 01170a2766a8..45db7a3dbef0 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -35,7 +36,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 7c0313c51f26..2f9c16d29212 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -37,7 +38,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 4a170890b3b1..3bae73e63633 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -34,7 +35,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 9dc8d496ead1..15a3f1a87ab0 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -35,7 +36,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include <mach/at91rm9200_mc.h> diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9bc6ab32e0ac..6094496f7edb 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -44,7 +45,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index b7b8390e8a00..0a8fe6a1b7c8 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -37,7 +38,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 81f911033681..938cc390bea3 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -40,7 +41,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 6f08faadb474..b4ac30e38a9e 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 85bcccd7b9e4..99fd7f8aee0e 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 4d3a02f1289e..2a21e790250e 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -37,7 +38,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 8a50c3e67186..89c8b579bfda 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -41,7 +42,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 5096a0ec50c1..3741f43cdae9 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -45,7 +46,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index ea8f185d3b9d..a580dd451a41 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -44,7 +45,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 817f59d7251b..8d77c2ff96b2 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -18,6 +18,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -41,7 +42,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ad234ccbf57e..2d6203ac1a42 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -14,6 +14,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -38,7 +39,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 4f14b54b93a8..39a28effc3df 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -8,6 +8,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -30,7 +31,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 8c4c1a02c4be..bac9b65cf551 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -40,7 +41,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 25e793782a4e..5bd735787d6d 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 95edcbd2aec6..3c288b396fc4 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -43,7 +44,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 4615528205c8..224e9e2f8674 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -11,6 +11,7 @@ #include <linux/clk.h> #include <linux/errno.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/debugfs.h> @@ -22,9 +23,6 @@ #include <mach/hardware.h> #include <mach/at91_pio.h> -#include <mach/gpio.h> - -#include <asm/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index bc1e0b2e2f4f..0ed8648c6452 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <mach/at91_dbgu.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) .endm diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index 056dc6674b6b..2b9a1f51210f 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -214,11 +214,6 @@ extern void at91_gpio_resume(void); */ #include <asm/errno.h> -#include <asm-generic/gpio.h> /* cansleep wrappers */ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep #define gpio_to_irq(gpio) (gpio) #define irq_to_gpio(irq) (irq) diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 0415a839e1ad..8dfafe76ffe6 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -9,13 +9,13 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> #include <mach/board.h> -#include <mach/gpio.h> /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 4159eca78945..7046158109d7 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -10,6 +10,7 @@ * (at your option) any later version. */ +#include <linux/gpio.h> #include <linux/suspend.h> #include <linux/sched.h> #include <linux/proc_fs.h> @@ -25,7 +26,6 @@ #include <asm/mach/irq.h> #include <mach/at91_pmc.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h index ed78aabb8e9f..6ae20a649a97 100644 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ b/arch/arm/mach-bcmring/include/mach/hardware.h @@ -22,7 +22,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <mach/memory.h> #include <cfg_global.h> #include <mach/csp/mm_io.h> @@ -31,7 +30,7 @@ * *_SIZE is the size of the region * *_BASE is the virtual address */ -#define RAM_START PLAT_PHYS_OFFSET +#define RAM_START PHYS_OFFSET #define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED) #define RAM_BASE PAGE_OFFSET diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h deleted file mode 100644 index 8848a5bb3445..000000000000 --- a/arch/arm/mach-bcmring/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/***************************************************************************** -* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <cfg_global.h> - -/* - * Physical vs virtual RAM address space conversion. These are - * private definitions which should NOT be used outside memory.h - * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. - */ - -#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE - -#endif diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index 507c6873b7ee..b802e8a51831 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <asm/hardware/clps7111.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp #ifndef CONFIG_DEBUG_CLPS711X_UART2 mov \rp, #0x0000 @ UART1 #else diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S index 56d828634db5..d04c150baa1c 100644 --- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ - .macro addruart,rp,rv + .macro addruart,rp,rv,tmp mov \rp, #0x00009000 orr \rv, \rp, #0xf0000000 @ virtual base orr \rp, \rp, #0x10000000 diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h deleted file mode 100644 index dc16c5c5d86b..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#define __phys_to_bus(x) ((x) + PHYS_OFFSET) -#define __bus_to_phys(x) ((x) - PHYS_OFFSET) - -#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) -#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) -#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) -#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) - -#endif diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 0b87a1ca2bb3..495e31306fc0 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o clock.o serial.o io.o psc.o \ - gpio.o dma.o usb.o common.o sram.o aemif.o + dma.o usb.o common.o sram.o aemif.o obj-$(CONFIG_DAVINCI_MUX) += mux.o @@ -17,7 +17,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o -obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index bd59f31b8a95..0b314bf16f7f 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -19,7 +19,7 @@ #include <asm/proc-fns.h> #include <mach/cpuidle.h> -#include <mach/memory.h> +#include <mach/ddr2.h> #define DAVINCI_CPUIDLE_MAX_STATES 2 diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 2ed2f822fc40..a6bf5dcaef13 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -8,6 +8,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> @@ -19,7 +20,7 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <mach/gpio.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 935dbed5c541..4aae01576aab 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -11,6 +11,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/platform_device.h> @@ -27,7 +28,7 @@ #include <mach/da8xx.h> #include <mach/cpufreq.h> #include <mach/pm.h> -#include <mach/gpio.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 68fb18162459..fe520d4167a2 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,7 +13,6 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> @@ -30,6 +29,7 @@ #include <mach/common.h> #include <mach/asp.h> #include <mach/spi.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 4604e72d7d99..679e168dce34 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -17,7 +17,6 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> #include <asm/mach/map.h> @@ -34,7 +33,7 @@ #include <mach/asp.h> #include <mach/keyscan.h> #include <mach/spi.h> - +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 555ff5bdb220..3470983aa343 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -12,7 +12,6 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <asm/mach/map.h> @@ -26,6 +25,7 @@ #include <mach/serial.h> #include <mach/common.h> #include <mach/asp.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index b0c350a02484..0b68ed534f8e 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -13,7 +13,6 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <asm/mach/map.h> @@ -27,6 +26,7 @@ #include <mach/serial.h> #include <mach/common.h> #include <mach/asp.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/include/mach/ddr2.h new file mode 100644 index 000000000000..c19e047d0e6a --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/ddr2.h @@ -0,0 +1,4 @@ +#define DDR2_SDRCR_OFFSET 0xc +#define DDR2_SRPD_BIT (1 << 23) +#define DDR2_MCLKSTOPEN_BIT (1 << 30) +#define DDR2_LPMODEN_BIT (1 << 31) diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index f8b7ea4f6235..cf94552d5274 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -18,56 +18,50 @@ #include <linux/serial_reg.h> -#include <asm/memory.h> - #include <mach/serial.h> #define UART_SHIFT 2 -#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 .popsection - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* Use davinci_uart_phys/virt if already configured */ -10: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =davinci_uart_v2p(davinci_uart_phys) - ldrne \rp, =davinci_uart_phys - add \rv, \rp, #4 @ davinci_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +10: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ davinci_uart_phys + ldr \rv, [\tmp, #4] @ davinci_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 - bne 99f @ already configured + bne 100f @ already configured /* Check the debug UART address set in uncompress.h */ - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? + and \rp, pc, #0xff000000 + ldr \rv, =DAVINCI_UART_INFO_OFS + add \rp, \rp, \rv /* Copy uart phys address from decompressor uart info */ - ldreq \rv, =davinci_uart_v2p(davinci_uart_phys) - ldrne \rv, =davinci_uart_phys - ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) - ldr \rp, [\rp, #0] - str \rp, [\rv] + ldr \rv, [\rp, #0] + str \rv, [\tmp, #0] /* Copy uart virt address from decompressor uart info */ - ldreq \rv, =davinci_uart_v2p(davinci_uart_virt) - ldrne \rv, =davinci_uart_virt - ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) - ldr \rp, [\rp, #4] - str \rp, [\rv] + ldr \rv, [\rp, #4] + str \rv, [\tmp, #4] b 10b -99: + + .align +99: .word . + .word davinci_uart_phys + .ltorg + +100: .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h new file mode 100644 index 000000000000..1fdd1fd35448 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h @@ -0,0 +1,91 @@ +/* + * TI DaVinci GPIO Support + * + * Copyright (c) 2006 David Brownell + * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DAVINCI_DAVINCI_GPIO_H +#define __DAVINCI_DAVINCI_GPIO_H + +#include <linux/io.h> +#include <linux/spinlock.h> + +#include <asm-generic/gpio.h> + +#include <mach/irqs.h> +#include <mach/common.h> + +#define DAVINCI_GPIO_BASE 0x01C67000 + +enum davinci_gpio_type { + GPIO_TYPE_DAVINCI = 0, + GPIO_TYPE_TNETV107X, +}; + +/* + * basic gpio routines + * + * board-specific init should be done by arch/.../.../board-XXX.c (maybe + * initializing banks together) rather than boot loaders; kexec() won't + * go through boot loaders. + * + * the gpio clock will be turned on when gpios are used, and you may also + * need to pay attention to PINMUX registers to be sure those pins are + * used as gpios, not with other peripherals. + * + * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. + * + * GPIOs can also be on external chips, numbered after the ones built-in + * to the DaVinci chip. For now, they won't be usable as IRQ sources. + */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ + +/* Convert GPIO signal to GPIO pin number */ +#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) + +struct davinci_gpio_controller { + struct gpio_chip chip; + int irq_base; + spinlock_t lock; + void __iomem *regs; + void __iomem *set_data; + void __iomem *clr_data; + void __iomem *in_data; +}; + +/* The __gpio_to_controller() and __gpio_mask() functions inline to constants + * with constant parameters; or in outlined code they execute at runtime. + * + * You'd access the controller directly when reading or writing more than + * one gpio value at a time, and to support wired logic where the value + * being driven by the cpu need not match the value read back. + * + * These are NOT part of the cross-platform GPIO interface + */ +static inline struct davinci_gpio_controller * +__gpio_to_controller(unsigned gpio) +{ + struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; + int index = gpio / 32; + + if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) + return NULL; + + return ctlrs + index; +} + +static inline u32 __gpio_mask(unsigned gpio) +{ + return 1 << (gpio % 32); +} + +#endif /* __DAVINCI_DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index fbece126c2bf..fbaae4772b91 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -13,80 +13,10 @@ #ifndef __DAVINCI_GPIO_H #define __DAVINCI_GPIO_H -#include <linux/io.h> -#include <linux/spinlock.h> - #include <asm-generic/gpio.h> -#include <mach/irqs.h> -#include <mach/common.h> - -#define DAVINCI_GPIO_BASE 0x01C67000 - -enum davinci_gpio_type { - GPIO_TYPE_DAVINCI = 0, - GPIO_TYPE_TNETV107X, -}; - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX registers to be sure those pins are - * used as gpios, not with other peripherals. - * - * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code may write GPIO(N). These may be - * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip - * may not support all the GPIOs in that range. - * - * GPIOs can also be on external chips, numbered after the ones built-in - * to the DaVinci chip. For now, they won't be usable as IRQ sources. - */ -#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -struct davinci_gpio_controller { - struct gpio_chip chip; - int irq_base; - spinlock_t lock; - void __iomem *regs; - void __iomem *set_data; - void __iomem *clr_data; - void __iomem *in_data; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct davinci_gpio_controller * -__gpio_to_controller(unsigned gpio) -{ - struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; - int index = gpio / 32; - - if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) - return NULL; - - return ctlrs + index; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} +/* The inline versions use the static inlines in the driver header */ +#include "gpio-davinci.h" /* * The get/set/clear functions will inline when called with constant @@ -147,11 +77,6 @@ static inline int gpio_cansleep(unsigned gpio) return __gpio_cansleep(gpio); } -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned irq) { /* don't support the reverse mapping */ diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h deleted file mode 100644 index 885d23319668..000000000000 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * DaVinci memory space definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/************************************************************************** - * Included Files - **************************************************************************/ -#include <asm/page.h> -#include <asm/sizes.h> - -/************************************************************************** - * Definitions - **************************************************************************/ -#define DAVINCI_DDR_BASE 0x80000000 -#define DA8XX_DDR_BASE 0xc0000000 - -#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) -#error Cannot enable DaVinci and DA8XX platforms concurrently -#elif defined(CONFIG_ARCH_DAVINCI_DA8XX) -#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE -#else -#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE -#endif - -#define DDR2_SDRCR_OFFSET 0xc -#define DDR2_SRPD_BIT BIT(23) -#define DDR2_MCLKSTOPEN_BIT BIT(30) -#define DDR2_LPMODEN_BIT BIT(31) - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index c9e6ce185a66..e347d88fef91 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -21,8 +21,9 @@ * macros in debug-macro.S. * * This area sits just below the page tables (see arch/arm/kernel/head.S). + * We define it as a relative offset from start of usable RAM. */ -#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8) +#define DAVINCI_UART_INFO_OFS 0x3ff8 #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 78d80683cdc2..9dc7cf9664fe 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -43,7 +43,12 @@ static inline void flush(void) static inline void set_uart_info(u32 phys, void * __iomem virt) { - u32 *uart_info = (u32 *)(DAVINCI_UART_INFO); + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS); uart = (u32 *)phys; uart_info[0] = phys; diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index 5f1e045a3ad1..d4e9316ecacb 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -22,7 +22,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/psc.h> -#include <mach/memory.h> +#include <mach/ddr2.h> #include "clock.h" diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c index 1b28fdd892a6..409bb869c7c7 100644 --- a/arch/arm/mach-davinci/tnetv107x.c +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -12,6 +12,7 @@ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> @@ -27,9 +28,9 @@ #include <mach/psc.h> #include <mach/cp_intc.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/hardware.h> #include <mach/tnetv107x.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S index da8bf2bad3b1..5929cbc59161 100644 --- a/arch/arm/mach-dove/include/mach/debug-macro.S +++ b/arch/arm/mach-dove/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/bridge-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =DOVE_SB_REGS_PHYS_BASE ldr \rv, =DOVE_SB_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h deleted file mode 100644 index bbc93fee6c75..000000000000 --- a/arch/arm/mach-dove/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S index 7ef5690fd08c..bb02c05e6812 100644 --- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S +++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * **/ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xf0000000 orr \rp, \rp, #0x00000be0 mov \rp, \rv diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index c60f081e930b..94c78bc66275 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -38,6 +38,7 @@ #include <mach/fb.h> #include <mach/ep93xx_keypad.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach/map.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 257175edc575..c63a5ec1a8e3 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -37,6 +37,7 @@ #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S index b25bc9076367..af54e43132cf 100644 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S @@ -11,7 +11,7 @@ */ #include <mach/ep93xx-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base orr \rp, \rp, #0x000c0000 diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h index c57152c231f1..8aff2ea35877 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h @@ -1,9 +1,7 @@ -/* - * arch/arm/mach-ep93xx/include/mach/gpio.h - */ +/* Include file for the EP93XX GPIO controller machine specifics */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H +#ifndef __GPIO_EP93XX_H +#define __GPIO_EP93XX_H /* GPIO port A. */ #define EP93XX_GPIO_LINE_A(x) ((x) + 0) @@ -99,22 +97,4 @@ /* maximum value for irq capable line identifiers */ #define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) -/* new generic GPIO API - see Documentation/gpio.txt */ - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -/* - * Map GPIO A0..A7 (0..7) to irq 64..71, - * B0..B7 (7..15) to irq 72..79, and - * F0..F7 (16..24) to irq 80..87. - */ -#define gpio_to_irq(gpio) \ - (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL) - -#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) - -#endif +#endif /* __GPIO_EP93XX_H */ diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 238bc603da86..d6f286b4db9c 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -18,12 +18,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <mach/hardware.h> #include <mach/fb.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 3bdf3a2e5ad0..2b4d4b0201df 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/fb.h> @@ -30,6 +29,7 @@ #include <mach/hardware.h> #include <mach/fb.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S index a442ef861167..6cacf16a67a6 100644 --- a/arch/arm/mach-exynos4/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S @@ -20,7 +20,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h index be9266b10fdb..80523ca9bb49 100644 --- a/arch/arm/mach-exynos4/include/mach/gpio.h +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* Practically, GPIO banks up to GPZ are the configurable gpio banks */ /* GPIO bank sizes */ @@ -151,6 +146,4 @@ enum s5p_gpio_number { #define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 1be2eeb7a0a0..e5acde25ffc5 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -15,7 +15,7 @@ #ifndef CONFIG_DEBUG_DC21285_PORT /* For NetWinder debugging */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x000003f8 orr \rv, \rp, #0xff000000 @ virtual orr \rp, \rp, #0x7c000000 @ physical @@ -31,7 +31,7 @@ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp .if dc21285_low mov \rp, #dc21285_low .else diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S index f40e006d296e..837670763b85 100644 --- a/arch/arm/mach-gemini/include/mach/debug-macro.S +++ b/arch/arm/mach-gemini/include/mach/debug-macro.S @@ -11,7 +11,7 @@ */ #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =GEMINI_UART_BASE @ physical ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual .endm diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h index 3bc2c70f2989..40a0527bada7 100644 --- a/arch/arm/mach-gemini/include/mach/gpio.h +++ b/arch/arm/mach-gemini/include/mach/gpio.h @@ -13,11 +13,6 @@ #define __MACH_GPIO_H__ #include <mach/irqs.h> -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep #define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE) #define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE) diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h deleted file mode 100644 index a50915f764d8..000000000000 --- a/arch/arm/mach-gemini/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2001-2006 Storlink, Corp. - * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#ifdef CONFIG_GEMINI_MEM_SWAP -# define PLAT_PHYS_OFFSET UL(0x00000000) -#else -# define PLAT_PHYS_OFFSET UL(0x10000000) -#endif - -#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S index c2093e835720..8a46157b0582 100644 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ b/arch/arm/mach-h720x/include/mach/debug-macro.S @@ -16,7 +16,7 @@ .equ io_virt, IO_VIRT .equ io_phys, IO_PHYS - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00020000 @ UART1 add \rv, \rp, #io_virt @ virtual address add \rp, \rp, #io_phys @ physical base address diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h deleted file mode 100644 index 96dcf50c51d3..000000000000 --- a/arch/arm/mach-h720x/include/mach/memory.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/memory.h - * - * Copyright (c) 2000 Jungjun Kim - * - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x40000000) -#endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0519dd7f034b..e9c2968005dc 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -449,6 +449,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index cf8f8099ebd7..82bd4403b450 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -17,13 +17,12 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/kernel.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include <mach/iomux-mx3.h> /* diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index efe6109099fd..635b0509068b 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -13,7 +13,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/iomux-mx27.h> #include "devices-imx27.h" diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 589066fb3316..712a7fb1cf01 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -542,7 +542,7 @@ static const struct mxc_nand_platform_data mx31_3ds_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, -#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT +#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT .flash_bbt = 1, #endif }; diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S index a1f598fd3a56..411b116077e4 100644 --- a/arch/arm/mach-integrator/include/mach/debug-macro.S +++ b/arch/arm/mach-integrator/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x16000000 @ physical base address mov \rv, #0xf0000000 @ virtual base add \rv, \rv, #0x16000000 >> 4 diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S index e664466d51bf..d869a6f67e5c 100644 --- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00002300 orr \rp, \rp, #0x00000040 orr \rv, \rp, #0xfe000000 @ virtual diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S index ff9e76c09f35..363bdf90b34d 100644 --- a/arch/arm/mach-iop32x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xfe000000 @ physical as well as virtual orr \rp, \rp, #0x00800000 @ location of the UART mov \rv, \rp diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h deleted file mode 100644 index 169cc239f76c..000000000000 --- a/arch/arm/mach-iop32x/include/mach/memory.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0xa0000000) - -#endif diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S index 40c500dd1fac..361be1f6026e 100644 --- a/arch/arm/mach-iop33x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00ff0000 orr \rp, \rp, #0x0000f700 orr \rv, #0xfe000000 @ virtual diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h deleted file mode 100644 index 8e1daf7006b6..000000000000 --- a/arch/arm/mach-iop33x/include/mach/memory.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 4068166c8993..59a512672bb9 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -13,7 +13,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/spinlock.h> @@ -39,7 +39,7 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> +#include <mach/gpio-ixp2000.h> static DEFINE_SPINLOCK(ixp2000_slowport_lock); static unsigned long ixp2000_slowport_irq_flags; diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S index 0ef533b20972..bdd3ccdc2890 100644 --- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00030000 #ifdef __ARMEB__ orr \rp, \rp, #0x00000003 diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h index 4a88d2c33dac..af836c76c3f1 100644 --- a/arch/arm/mach-ixp2000/include/mach/gpio.h +++ b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h @@ -3,7 +3,7 @@ * * Copyright (C) 2002 Intel Corporation. * - * This program is free software, you can redistribute it and/or modify + * This program is free software, you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ @@ -11,7 +11,7 @@ /* * IXP2000 GPIO in/out, edge/level detection for IRQs: * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High - * or both Falling-edge and Rising-edge. + * or both Falling-edge and Rising-edge. * This must be called *before* the corresponding IRQ is registerd. * Use this instead of directly setting the GPIO registers. * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 235638f800e5..634b6c852f68 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -14,6 +14,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mm.h> @@ -40,8 +41,7 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> -#include <mach/gpio.h> - +#include <mach/gpio-ixp2000.h> /************************************************************************* * IXDP2x00 IRQ Initialization diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S index f7c6eef7fa22..5ff524c13744 100644 --- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S @@ -12,7 +12,7 @@ */ #include <mach/ixp23xx.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual #ifdef __ARMEB__ diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 71607a7ecc7e..8837fbca27ce 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -16,7 +16,7 @@ * Author: Rod Whitby <rod@whitby.id.au> * Maintainers: http://www.nslu2-linux.org/ */ - +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/jiffies.h> #include <linux/timer.h> @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <asm/gpio.h> #define DSMG600_SDA_PIN 5 #define DSMG600_SCL_PIN 4 diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index a9540cd90375..2887c3578c17 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -14,7 +14,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/serial.h> @@ -27,7 +27,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/gpio.h> #define FSG_SDA_PIN 12 #define FSG_SCL_PIN 13 diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index b974a49c0aff..8c9f8d564492 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp #ifdef __ARMEB__ mov \rp, #3 @ Uart regs are at off set of 3 if @ byte writes used - Big Endian. diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h index a5f87ded2f28..83d6b4ed60bb 100644 --- a/arch/arm/mach-ixp4xx/include/mach/gpio.h +++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h @@ -28,6 +28,8 @@ #include <linux/kernel.h> #include <mach/hardware.h> +#define __ARM_GPIOLIB_COMPLEX + static inline int gpio_request(unsigned gpio, const char *label) { return 0; @@ -70,6 +72,7 @@ static inline void gpio_set_value(unsigned gpio, int value) #include <asm-generic/gpio.h> /* cansleep wrappers */ extern int gpio_to_irq(int gpio); +#define gpio_to_irq gpio_to_irq extern int irq_to_gpio(unsigned int irq); #endif diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h deleted file mode 100644 index 4caf1761f1e2..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/memory.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/memory.h - * - * Copyright (c) 2001-2004 MontaVista Software, Inc. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <asm/sizes.h> - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 9f4669260d4c..de716fa1aab6 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -17,7 +17,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/jiffies.h> @@ -32,7 +32,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/gpio.h> #define NAS100D_SDA_PIN 5 #define NAS100D_SCL_PIN 6 diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 3676fbf6ef9c..ac81ccb26bfe 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -16,7 +16,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/serial.h> @@ -30,7 +30,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <asm/gpio.h> #define NSLU2_SDA_PIN 7 #define NSLU2_SCL_PIN 6 diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index db06ae437d08..f785d401a607 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/bridge-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =KIRKWOOD_REGS_PHYS_BASE ldr \rv, =KIRKWOOD_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h deleted file mode 100644 index 4600b44e3ad3..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 05d193a25b25..c4c68e5b94f1 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -7,14 +7,13 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/irq.h> -#include <asm/gpio.h> #include "common.h" static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index b0a7d979a8ed..cc431fa22ccb 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -7,12 +7,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include <plat/mpp.h> #include "common.h" diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 7e3e8160ed30..853efd9133c6 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -3,7 +3,7 @@ # Makefile for KS8695 architecture support # -obj-y := cpu.o irq.o time.o gpio.o devices.o +obj-y := cpu.o irq.o time.o devices.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index a5fcc7c7fe18..a91f99d265aa 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -34,7 +34,7 @@ #include <asm/mach/irq.h> #include <mach/devices.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index fb91a716a7db..d24bcef2e2dd 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -29,7 +29,7 @@ #include <asm/mach/irq.h> #include <mach/devices.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 8f67a750b6c7..16c95657f8fd 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -5,7 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -18,7 +18,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> #include <mach/devices.h> #include "generic.h" diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c index b89fb6d46ccc..73bd63812878 100644 --- a/arch/arm/mach-ks8695/devices.c +++ b/arch/arm/mach-ks8695/devices.c @@ -20,6 +20,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S index bf516adf1925..a79e48981202 100644 --- a/arch/arm/mach-ks8695/include/mach/debug-macro.S +++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <mach/regs-uart.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =KS8695_UART_PA @ physical base address ldr \rv, =KS8695_UART_VA @ virtual base address .endm diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h new file mode 100644 index 000000000000..6eb034d60325 --- /dev/null +++ b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2006 Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_KS8659_GPIO_H +#define __MACH_KS8659_GPIO_H + +#include <linux/kernel.h> + +#define KS8695_GPIO_0 0 +#define KS8695_GPIO_1 1 +#define KS8695_GPIO_2 2 +#define KS8695_GPIO_3 3 +#define KS8695_GPIO_4 4 +#define KS8695_GPIO_5 5 +#define KS8695_GPIO_6 6 +#define KS8695_GPIO_7 7 +#define KS8695_GPIO_8 8 +#define KS8695_GPIO_9 9 +#define KS8695_GPIO_10 10 +#define KS8695_GPIO_11 11 +#define KS8695_GPIO_12 12 +#define KS8695_GPIO_13 13 +#define KS8695_GPIO_14 14 +#define KS8695_GPIO_15 15 + +/* + * Configure GPIO pin as external interrupt source. + */ +extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type); + +/* Register the GPIOs */ +extern void ks8695_register_gpios(void); + +#endif /* __MACH_KS8659_GPIO_H */ diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h index 86312d476bc6..f5fda36e4512 100644 --- a/arch/arm/mach-ks8695/include/mach/gpio.h +++ b/arch/arm/mach-ks8695/include/mach/gpio.h @@ -11,47 +11,9 @@ #ifndef __ASM_ARCH_GPIO_H_ #define __ASM_ARCH_GPIO_H_ -#include <linux/kernel.h> - -#define KS8695_GPIO_0 0 -#define KS8695_GPIO_1 1 -#define KS8695_GPIO_2 2 -#define KS8695_GPIO_3 3 -#define KS8695_GPIO_4 4 -#define KS8695_GPIO_5 5 -#define KS8695_GPIO_6 6 -#define KS8695_GPIO_7 7 -#define KS8695_GPIO_8 8 -#define KS8695_GPIO_9 9 -#define KS8695_GPIO_10 10 -#define KS8695_GPIO_11 11 -#define KS8695_GPIO_12 12 -#define KS8695_GPIO_13 13 -#define KS8695_GPIO_14 14 -#define KS8695_GPIO_15 15 - -/* - * Configure GPIO pin as external interrupt source. - */ -extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type); - /* * Map IRQ number to GPIO line. */ extern int irq_to_gpio(unsigned int irq); -#include <asm-generic/gpio.h> - -/* If it turns out that we need to optimise GPIO access for the - * Micrel's GPIOs, then these can be changed to check their argument - * directly as static inlines. However for now it's probably not - * worthwhile. - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_to_irq __gpio_to_irq - -/* Register the GPIOs */ -extern void ks8695_register_gpios(void); - #endif diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c index 184ef74e4bee..d6f6502ac9b5 100644 --- a/arch/arm/mach-ks8695/leds.c +++ b/arch/arm/mach-ks8695/leds.c @@ -7,14 +7,14 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/gpio.h> #include <asm/leds.h> #include <mach/devices.h> -#include <mach/gpio.h> static inline void ks8695_led_on(unsigned int led) diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S index b0a2db77d392..0b4e760159b9 100644 --- a/arch/arm/mach-l7200/include/mach/debug-macro.S +++ b/arch/arm/mach-l7200/include/mach/debug-macro.S @@ -14,7 +14,7 @@ .equ io_virt, IO_BASE .equ io_phys, IO_START - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00044000 @ UART1 @ mov \rp, #0x00045000 @ UART2 add \rv, \rp, #io_virt @ virtual address diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index a5fc5d0eeaeb..f5db805ab958 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -3,6 +3,6 @@ # obj-y := timer.o irq.o common.o serial.o clock.o -obj-y += gpiolib.o pm.o suspend.o +obj-y += pm.o suspend.o obj-y += phy3250.o diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S index 629e744aeb9e..351bd6c84909 100644 --- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S @@ -20,7 +20,7 @@ * Debug output is hardcoded to standard UART 5 */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldreq \rp, =0x40090000 ldrne \rv, =0xF4090000 .endm diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h new file mode 100644 index 000000000000..1816e22a3479 --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h @@ -0,0 +1,50 @@ +/* + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_GPIO_LPC32XX_H +#define __MACH_GPIO_LPC32XX_H + +/* + * Note! + * Muxed GP pins need to be setup to the GP state in the board level + * code prior to using this driver. + * GPI pins : 28xP3 group + * GPO pins : 24xP3 group + * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group + */ + +#define LPC32XX_GPIO_P0_MAX 8 +#define LPC32XX_GPIO_P1_MAX 24 +#define LPC32XX_GPIO_P2_MAX 13 +#define LPC32XX_GPIO_P3_MAX 6 +#define LPC32XX_GPI_P3_MAX 28 +#define LPC32XX_GPO_P3_MAX 24 + +#define LPC32XX_GPIO_P0_GRP 0 +#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) +#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) +#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) +#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) +#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) + +/* + * A specific GPIO can be selected with this macro + * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) + * See the LPC32x0 User's guide for GPIO group numbers + */ +#define LPC32XX_GPIO(x, y) ((x) + (y)) + +#endif /* __MACH_GPIO_LPC32XX_H */ diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h index 67d03da1eee9..e69de29bb2d1 100644 --- a/arch/arm/mach-lpc32xx/include/mach/gpio.h +++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h @@ -1,74 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/gpio.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <asm-generic/gpio.h> - -/* - * Note! - * Muxed GP pins need to be setup to the GP state in the board level - * code prior to using this driver. - * GPI pins : 28xP3 group - * GPO pins : 24xP3 group - * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group - */ - -#define LPC32XX_GPIO_P0_MAX 8 -#define LPC32XX_GPIO_P1_MAX 24 -#define LPC32XX_GPIO_P2_MAX 13 -#define LPC32XX_GPIO_P3_MAX 6 -#define LPC32XX_GPI_P3_MAX 28 -#define LPC32XX_GPO_P3_MAX 24 - -#define LPC32XX_GPIO_P0_GRP 0 -#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) -#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) -#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) -#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) -#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) - -/* - * A specific GPIO can be selected with this macro - * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) - * See the LPC32x0 User's guide for GPIO group numbers - */ -#define LPC32XX_GPIO(x, y) ((x) + (y)) - -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h deleted file mode 100644 index a647dd624afa..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/memory.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/memory.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset of bank 0 - */ -#define PLAT_PHYS_OFFSET UL(0x80000000) - -#endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 9b621e14d16a..6d2f0d1b9373 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -37,6 +37,7 @@ #include <mach/hardware.h> #include <mach/platform.h> +#include <mach/gpio-lpc32xx.h> #include "common.h" /* diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 56ef5f6c8116..323d4c9e9f44 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -77,7 +77,7 @@ config MACH_TETON_BGA Say 'Y' here if you want to support the Marvell PXA168-based Teton BGA Development Board. -config MACH_SHEEVAD +config MACH_GPLUGD bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" select CPU_PXA168 help diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index b0ac942327aa..8f948f981646 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -19,4 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o -obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o +obj-$(CONFIG_MACH_GPLUGD) += gplugd.o diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 06b5fa853c93..833c3a2784aa 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -17,13 +17,13 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-pxa168.h> #include <mach/pxa168.h> -#include <mach/gpio.h> #include <video/pxa168fb.h> #include <linux/input.h> #include <plat/pxa27x_keypad.h> diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index c79162a50f28..e411252e3d39 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/regulator/fixed.h> diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index 3143e994e672..149b30cd1469 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -30,7 +30,7 @@ extern struct clkops apmu_clk_ops; #define APBC_CLK(_name, _reg, _fnclksel, _rate) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APBC_##_reg, \ + .clk_rst = APBC_##_reg, \ .fnclksel = _fnclksel, \ .rate = _rate, \ .ops = &apbc_clk_ops, \ @@ -38,7 +38,7 @@ struct clk clk_##_name = { \ #define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APBC_##_reg, \ + .clk_rst = APBC_##_reg, \ .fnclksel = _fnclksel, \ .rate = _rate, \ .ops = _ops, \ @@ -46,7 +46,7 @@ struct clk clk_##_name = { \ #define APMU_CLK(_name, _reg, _eval, _rate) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APMU_##_reg, \ + .clk_rst = APMU_##_reg, \ .enable_val = _eval, \ .rate = _rate, \ .ops = &apmu_clk_ops, \ @@ -54,7 +54,7 @@ struct clk clk_##_name = { \ #define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APMU_##_reg, \ + .clk_rst = APMU_##_reg, \ .enable_val = _eval, \ .rate = _rate, \ .ops = _ops, \ diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 0ec0ca80bb3e..5720674739f0 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -27,12 +27,12 @@ EXPORT_SYMBOL(mmp_chip_id); static struct map_desc standard_io_desc[] __initdata = { { .pfn = __phys_to_pfn(APB_PHYS_BASE), - .virtual = APB_VIRT_BASE, + .virtual = (unsigned long)APB_VIRT_BASE, .length = APB_PHYS_SIZE, .type = MT_DEVICE, }, { .pfn = __phys_to_pfn(AXI_PHYS_BASE), - .virtual = AXI_VIRT_BASE, + .virtual = (unsigned long)AXI_VIRT_BASE, .length = AXI_PHYS_SIZE, .type = MT_DEVICE, }, diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 98e25d9aaab6..69156568bc41 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -9,11 +9,11 @@ */ #include <linux/init.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/gpio.h> #include <mach/pxa168.h> #include <mach/mfp-pxa168.h> @@ -188,7 +188,7 @@ static void __init gplugd_init(void) pxa168_add_eth(&gplugd_eth_platform_data); } -MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform") +MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform") .map_io = mmp_map_io, .nr_irqs = IRQ_BOARD_START, .init_irq = pxa168_init_irq, diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h index 3254089a644d..3e404acd6ff4 100644 --- a/arch/arm/mach-mmp/include/mach/addr-map.h +++ b/arch/arm/mach-mmp/include/mach/addr-map.h @@ -11,6 +11,12 @@ #ifndef __ASM_MACH_ADDR_MAP_H #define __ASM_MACH_ADDR_MAP_H +#ifndef __ASSEMBLER__ +#define IOMEM(x) ((void __iomem *)(x)) +#else +#define IOMEM(x) (x) +#endif + /* APB - Application Subsystem Peripheral Bus * * NOTE: the DMA controller registers are actually on the AXI fabric #1 @@ -18,11 +24,11 @@ * peripherals on APB, let's count it into the ABP mapping area. */ #define APB_PHYS_BASE 0xd4000000 -#define APB_VIRT_BASE 0xfe000000 +#define APB_VIRT_BASE IOMEM(0xfe000000) #define APB_PHYS_SIZE 0x00200000 #define AXI_PHYS_BASE 0xd4200000 -#define AXI_VIRT_BASE 0xfe200000 +#define AXI_VIRT_BASE IOMEM(0xfe200000) #define AXI_PHYS_SIZE 0x00200000 /* Static Memory Controller - Chip Select 0 and 1 */ diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S index 7e2ebd3efc7c..b6f14d203c25 100644 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ b/arch/arm/mach-mmp/include/mach/debug-macro.S @@ -11,7 +11,7 @@ #include <mach/addr-map.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =APB_PHYS_BASE @ physical ldr \rv, =APB_VIRT_BASE @ virtual orr \rp, \rp, #0x00017000 diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h new file mode 100644 index 000000000000..d14eeaf16322 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -0,0 +1,30 @@ +#ifndef __ASM_MACH_GPIO_PXA_H +#define __ASM_MACH_GPIO_PXA_H + +#include <mach/addr-map.h> +#include <mach/irqs.h> + +#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) + +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) + +#define NR_BUILTIN_GPIO IRQ_GPIO_NUM + +#define gpio_to_bank(gpio) ((gpio) >> 5) + +/* NOTE: these macros are defined here to make optimization of + * gpio_{get,set}_value() to work when 'gpio' is a constant. + * Usage of these macros otherwise is no longer recommended, + * use generic GPIO API whenever possible. + */ +#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) + +#include <plat/gpio-pxa.h> + +#endif /* __ASM_MACH_GPIO_PXA_H */ diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index 7bfb827f3fe3..681262359d1c 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -1,36 +1,13 @@ #ifndef __ASM_MACH_GPIO_H #define __ASM_MACH_GPIO_H -#include <mach/addr-map.h> -#include <mach/irqs.h> #include <asm-generic/gpio.h> -#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) - -#define NR_BUILTIN_GPIO IRQ_GPIO_NUM - -#define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) #define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START) - #define __gpio_is_inverted(gpio) (0) #define __gpio_is_occupied(gpio) (0) -/* NOTE: these macros are defined here to make optimization of - * gpio_{get,set}_value() to work when 'gpio' is a constant. - * Usage of these macros otherwise is no longer recommended, - * use generic GPIO API whenever possible. - */ -#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) - #include <plat/gpio.h> #endif /* __ASM_MACH_GPIO_H */ diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h deleted file mode 100644 index d68b50a2d6a0..000000000000 --- a/arch/arm/mach-mmp/include/mach/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_MEMORY_H -#define __ASM_MACH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 5d6421d63254..8bfac6612623 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/mfd/max8925.h> diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 079c18861d5c..7a7e8e4dde41 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -25,7 +24,7 @@ #include <mach/irqs.h> #include <mach/dma.h> #include <mach/mfp.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/devices.h> #include <mach/mmp2.h> @@ -87,7 +86,8 @@ static struct mfp_addr_map mmp2_addr_map[] __initdata = { void mmp2_clear_pmic_int(void) { - unsigned long mfpr_pmic, data; + void __iomem *mfpr_pmic; + unsigned long data; mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4; data = __raw_readl(mfpr_pmic); diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 0156f535dae7..50c1763911ff 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -7,7 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -21,7 +20,7 @@ #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 1464607aa60d..4ebbfbba39fc 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -7,7 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,7 +19,7 @@ #include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/mfp.h> #include <mach/devices.h> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index c296b75c4453..eb5be879fd8c 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -7,18 +7,18 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-pxa910.h> #include <mach/pxa910.h> -#include <mach/gpio.h> #include "common.h" diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index a80765533f13..6d84ee740df4 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -13,7 +13,7 @@ * GNU General Public License for more details. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -34,7 +34,6 @@ #include <mach/vreg.h> #include <mach/mpp.h> -#include <mach/gpio.h> #include <mach/board.h> #include <mach/msm_iomap.h> diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 5a2ab6855183..71de5062c71e 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -14,7 +14,7 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> #include <linux/gpio.h> @@ -24,13 +24,13 @@ #include <linux/smsc911x.h> #include <linux/usb/msm_hsusb.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/memory.h> #include <asm/setup.h> -#include <mach/gpio.h> #include <mach/board.h> #include <mach/msm_iomap.h> #include <mach/dma.h> @@ -42,6 +42,21 @@ extern struct sys_timer msm_timer; +static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { + tag->u.mem.start = 0; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm7x30_reserve(void) +{ + memblock_remove(0x0, SZ_2M); +} + static int hsusb_phy_init_seq[] = { 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ 0x02, 0x36, /* Disable CDR Auto Reset feature */ @@ -107,6 +122,8 @@ static void __init msm7x30_map_io(void) MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") .atag_offset = 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -115,6 +132,8 @@ MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") .atag_offset = 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -123,6 +142,8 @@ MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") .atag_offset = 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 35c7ceeb3f29..b04468e7d00e 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -20,16 +20,34 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> #include "devices.h" +static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8960_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} + static void __init msm8960_map_io(void) { msm_map_msm8960_io(); @@ -76,6 +94,8 @@ static void __init msm8960_rumi3_init(void) } MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, @@ -83,6 +103,8 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") MACHINE_END MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 1163b6fd05d2..9221f54778be 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -20,14 +20,31 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> +static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8x60_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} static void __init msm8x60_map_io(void) { @@ -65,6 +82,8 @@ static void __init msm8x60_init(void) } MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -72,6 +91,8 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") MACHINE_END MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -79,6 +100,8 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") MACHINE_END MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -86,6 +109,8 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") MACHINE_END MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 51109b1f4342..7e8909c978c3 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -14,7 +14,7 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> #include <linux/gpio.h> @@ -32,7 +32,6 @@ #include <mach/board.h> #include <mach/irqs.h> #include <mach/sirc.h> -#include <mach/gpio.h> #include <mach/vreg.h> #include <mach/mmc.h> diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index dc0bcb5a6b9a..afa9293d5800 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -11,7 +11,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -22,7 +22,6 @@ #include <linux/delay.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c index f7a9724788b0..8650342b7493 100644 --- a/arch/arm/mach-msm/board-trout-mmc.c +++ b/arch/arm/mach-msm/board-trout-mmc.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-msm/board-trout-mmc.c ** Author: Brian Swetland <swetland@google.com> */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -11,7 +11,6 @@ #include <linux/err.h> #include <linux/debugfs.h> -#include <asm/gpio.h> #include <asm/io.h> #include <mach/vreg.h> diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 729bb49a44ca..25105c1027fe 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-msm/board-trout-mddi.c ** Author: Brian Swetland <swetland@google.com> */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -11,7 +11,6 @@ #include <linux/err.h> #include <asm/io.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <mach/msm_fb.h> diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 646b99ebc773..2dc73ccddb11 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -20,7 +20,7 @@ #include <mach/msm_iomap.h> #if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =MSM_DEBUG_UART_PHYS ldr \rv, =MSM_DEBUG_UART_BASE .endm @@ -37,7 +37,7 @@ beq 1001b .endm #else - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rv, #0xff000000 orr \rv, \rv, #0x00f00000 .endm diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h index 36ad50d3bfaa..40a8c178f10d 100644 --- a/arch/arm/mach-msm/include/mach/gpio.h +++ b/arch/arm/mach-msm/include/mach/gpio.h @@ -1,26 +1 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. - * Author: Mike Lockwood <lockwood@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef __ASM_ARCH_MSM_GPIO_H -#define __ASM_ARCH_MSM_GPIO_H - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif /* __ASM_ARCH_MSM_GPIO_H */ +/* empty */ diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h deleted file mode 100644 index f2f8d299ba95..000000000000 --- a/arch/arm/mach-msm/include/mach/memory.h +++ /dev/null @@ -1,35 +0,0 @@ -/* arch/arm/mach-msm/include/mach/memory.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* physical offset of RAM */ -#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A) -#define PLAT_PHYS_OFFSET UL(0x00000000) -#elif defined(CONFIG_ARCH_QSD8X50) -#define PLAT_PHYS_OFFSET UL(0x20000000) -#elif defined(CONFIG_ARCH_MSM7X30) -#define PLAT_PHYS_OFFSET UL(0x00200000) -#elif defined(CONFIG_ARCH_MSM8X60) -#define PLAT_PHYS_OFFSET UL(0x40200000) -#elif defined(CONFIG_ARCH_MSM8960) -#define PLAT_PHYS_OFFSET UL(0x40200000) -#else -#define PLAT_PHYS_OFFSET UL(0x10000000) -#endif - -#endif - diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S index 04891428e48b..a7df02b049b7 100644 --- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/mv78xx0.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =MV78XX0_REGS_PHYS_BASE ldr \rv, =MV78XX0_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h deleted file mode 100644 index a648c51f2e42..000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 3e24431bb5ea..e421b701663b 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -7,12 +7,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/irq.h> -#include <asm/gpio.h> #include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index 59b7686b9209..cf4e494d44bf 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -7,13 +7,12 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> #include <plat/mpp.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c index 0624fb8edffb..98052fc852c7 100644 --- a/arch/arm/mach-mx5/pm-imx5.c +++ b/arch/arm/mach-mx5/pm-imx5.c @@ -20,9 +20,13 @@ static struct clk *gpc_dvfs_clk; +static int mx5_suspend_prepare(void) +{ + return clk_enable(gpc_dvfs_clk); +} + static int mx5_suspend_enter(suspend_state_t state) { - clk_enable(gpc_dvfs_clk); switch (state) { case PM_SUSPEND_MEM: mx5_cpu_lp_set(STOP_POWER_OFF); @@ -43,11 +47,14 @@ static int mx5_suspend_enter(suspend_state_t state) __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); } cpu_do_idle(); - clk_disable(gpc_dvfs_clk); - return 0; } +static void mx5_suspend_finish(void) +{ + clk_disable(gpc_dvfs_clk); +} + static int mx5_pm_valid(suspend_state_t state) { return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); @@ -55,7 +62,9 @@ static int mx5_pm_valid(suspend_state_t state) static const struct platform_suspend_ops mx5_suspend_ops = { .valid = mx5_pm_valid, + .prepare = mx5_suspend_prepare, .enter = mx5_suspend_enter, + .finish = mx5_suspend_finish, }; static int __init mx5_pm_init(void) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 5dcc59d5b9ec..ba532279d1a1 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -349,7 +349,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \ - reg |= frac; \ + reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC; \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ } \ \ diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S index 79650a1ad78d..714570d83668 100644 --- a/arch/arm/mach-mxs/include/mach/debug-macro.S +++ b/arch/arm/mach-mxs/include/mach/debug-macro.S @@ -30,7 +30,7 @@ #define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical ldr \rv, =UART_VADDR @ virtual .endm diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h index 56025aa0a639..40a8c178f10d 100644 --- a/arch/arm/mach-mxs/include/mach/gpio.h +++ b/arch/arm/mach-mxs/include/mach/gpio.h @@ -1,31 +1 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MXS_GPIO_H__ -#define __MACH_MXS_GPIO_H__ - -#include <asm-generic/gpio.h> - -/* use gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif /* __MACH_MXS_GPIO_H__ */ +/* empty */ diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h deleted file mode 100644 index b5420a5c2d4b..000000000000 --- a/arch/arm/mach-mxs/include/mach/memory.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MXS_MEMORY_H__ -#define __MACH_MXS_MEMORY_H__ - -#define PHYS_OFFSET UL(0x40000000) - -#endif /* __MACH_MXS_MEMORY_H__ */ diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S index 56a915228180..247781e096e2 100644 --- a/arch/arm/mach-netx/include/mach/debug-macro.S +++ b/arch/arm/mach-netx/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include "hardware.h" - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00000a00 orr \rv, \rp, #io_p2v(0x00100000) @ virtual orr \rp, \rp, #0x00100000 @ physical diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h deleted file mode 100644 index 59561496c36e..000000000000 --- a/arch/arm/mach-netx/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/memory.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x80000000) - -#endif - diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 398a75f62bee..0cbb74c96ef7 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -27,6 +27,7 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> +#include <plat/gpio-nomadik.h> #include <plat/mtu.h> #include <mach/setup.h> diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index ac58e3b03b1a..dc67717db6f0 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -21,8 +21,8 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/platform_device.h> -#include <linux/gpio.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index abfe25a08d6b..0fc2f6f1cc97 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -3,8 +3,8 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> #include <linux/i2c-gpio.h> -#include <linux/gpio.h> #include <linux/platform_device.h> +#include <plat/gpio-nomadik.h> /* * There are two busses in the 8815NHK. diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S index e7151b4b8889..735417922ce2 100644 --- a/arch/arm/mach-nomadik/include/mach/debug-macro.S +++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S @@ -10,7 +10,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00100000 add \rp, \rp, #0x000fb000 add \rv, \rp, #0xf0000000 @ virtual base diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h index 7a81a0420343..efdde0ae0a4f 100644 --- a/arch/arm/mach-nomadik/include/mach/gpio.h +++ b/arch/arm/mach-nomadik/include/mach/gpio.h @@ -1,6 +1,4 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -#include <plat/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h deleted file mode 100644 index d3325211ba6a..000000000000 --- a/arch/arm/mach-nomadik/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * mach-nomadik/include/mach/memory.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h deleted file mode 100644 index ef9864b002a6..000000000000 --- a/arch/arm/mach-nuc93x/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/memory.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index eb36b25450a0..4ea60e2038ea 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,7 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -30,7 +30,6 @@ #include <plat/io.h> #include <plat/board-ams-delta.h> -#include <mach/gpio.h> #include <plat/keypad.h> #include <plat/mux.h> #include <plat/usb.h> diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 999789c4811d..31e089b6f03f 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -28,7 +28,6 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/flash.h> #include <plat/fpga.h> diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 23cc9e4ad50d..05c6e9d858f3 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -12,7 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -22,7 +22,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index f2fc43d8382b..da0e37d40823 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -11,13 +11,12 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c/tps65010.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 6c70c28d055c..c2e279173d42 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -18,7 +18,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/delay.h> @@ -32,7 +32,6 @@ #include <linux/smc91x.h> #include <mach/hardware.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 2098525e7cc5..f8242aa9b763 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -11,13 +11,12 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c/tps65010.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 8e2b64a46929..8f5b6af7ed59 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -13,7 +13,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/types.h> #include <linux/init.h> #include <linux/major.h> @@ -34,7 +34,6 @@ #include <asm/setup.h> #include <asm/page.h> #include <mach/hardware.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index e81ead1c89ea..fcd1a3c31896 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -23,7 +23,6 @@ * 02110-1301, USA. * */ - #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 8b034594fbc7..c2234caf8a7a 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -15,7 +15,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -34,7 +34,6 @@ #include <plat/mux.h> #include <plat/flash.h> #include <plat/fpga.h> -#include <mach/gpio.h> #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 6825635ac681..02789c5d3703 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mutex.h> @@ -26,7 +26,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 44b8e9362bf4..e4dca1deebb4 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -25,7 +25,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -42,7 +42,6 @@ #include <linux/i2c/tps65010.h> #include <mach/hardware.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 3d8cd90b1dbb..50c4e398bcc8 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -16,7 +16,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -33,7 +33,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index d0eefe81cd1b..273771cb1b61 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -12,6 +12,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -30,7 +31,6 @@ #include <asm/mach/map.h> #include <plat/led.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 98e79bc09213..de36ade38ef7 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -15,6 +15,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -32,7 +33,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ad3a1567604e..04b1befaced6 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -28,7 +28,6 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> #include <plat/flash.h> diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index e8ddd86e3fda..b59f78850e69 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -12,11 +12,11 @@ * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/platform_device.h> #include <mach/hardware.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include <plat/board-sx1.h> #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 602b55c39d3d..2bea941741d5 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -14,7 +14,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/dma.h> diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 80165154617a..940faed82be2 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -13,6 +13,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -33,7 +34,6 @@ #include <plat/board-voiceblue.h> #include <plat/common.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 36f26c3fa25e..7c50ecf68123 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -10,6 +10,7 @@ */ #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +25,6 @@ #include <plat/tc.h> #include <plat/board.h> #include <plat/mux.h> -#include <mach/gpio.h> #include <plat/mmc.h> #include <plat/omap7xx.h> #include <plat/mcbsp.h> diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index cddbf8b089ce..0a17a1a7e00d 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -17,6 +17,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/device.h> @@ -28,7 +29,6 @@ #include <asm/mach/irq.h> #include <plat/fpga.h> -#include <mach/gpio.h> static void fpga_mask_irq(struct irq_data *d) { diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 62856044eb63..2b36a281dc84 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,13 +13,8 @@ #include <linux/serial_reg.h> -#include <asm/memory.h> - #include <plat/serial.h> -#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data omap_uart_phys: .word 0x0 omap_uart_virt: .word 0x0 @@ -31,26 +26,24 @@ omap_uart_virt: .word 0x0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* Use omap_uart_phys/virt if already configured */ -9: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rp, =omap_uart_phys @ MMU enabled - add \rv, \rp, #4 @ omap_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +9: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ omap_uart_phys + ldr \rv, [\tmp, #4] @ omap_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 - bne 99f @ already configured + bne 100f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled - ldr \rp, [\rp, #0] + and \rp, pc, #0xff000000 + ldr \rv, =OMAP_UART_INFO_OFS + ldr \rp, [\rp, \rv] /* Select the UART to use based on the UART1 scratchpad value */ 10: cmp \rp, #0 @ no port configured? @@ -74,17 +67,18 @@ omap_uart_virt: .word 0x0 /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0xff000000 @ phys base - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys sub \rp, \rp, #0xff000000 @ phys base add \rp, \rp, #0xfe000000 @ virt base - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt b 9b -99: + + .align +99: .word . + .word omap_uart_phys + .ltorg + +100: .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index e9b600c113ef..c6337645ba8a 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -2,4 +2,55 @@ * arch/arm/mach-omap1/include/mach/memory.h */ -#include <plat/memory.h> +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PLAT_PHYS_OFFSET UL(0x10000000) + +/* + * Bus address is physical address, except for OMAP-1510 Local Bus. + * OMAP-1510 bus address is translated into a Local Bus address if the + * OMAP bus type is lbus. We do the address translation based on the + * device overriding the defaults used in the dma-mapping API. + * Note that the is_lbus_device() test is not very efficient on 1510 + * because of the strncmp(). + */ +#ifdef CONFIG_ARCH_OMAP15XX + +/* + * OMAP-1510 Local Bus address offset + */ +#define OMAP1510_LB_OFFSET UL(0x30000000) + +#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) +#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) +#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) + +#define __arch_pfn_to_dma(dev, pfn) \ + ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ + if (is_lbus_device(dev)) \ + __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ + __dma; }) + +#define __arch_dma_to_pfn(dev, addr) \ + ({ dma_addr_t __dma = addr; \ + if (is_lbus_device(dev)) \ + __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \ + __phys_to_pfn(__dma); \ + }) + +#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ + lbus_to_virt(addr) : \ + __phys_to_virt(addr)); }) + +#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ + (dma_addr_t) (is_lbus_device(dev) ? \ + virt_to_lbus(__addr) : \ + __virt_to_phys(__addr)); }) + +#endif /* CONFIG_ARCH_OMAP15XX */ + +#endif diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index e2b9c901ab67..e5b104b7fce6 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -35,7 +35,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/module.h> #include <linux/sched.h> @@ -45,7 +45,6 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> #include <plat/cpu.h> #define IRQ_BANK(irq) ((irq) >> 5) diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index b4f9be52e1e8..4b818eb9f911 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -9,6 +9,7 @@ * The "surfer" expansion board and H2 sample board also have two-color * green+red LEDs (in parallel), used here for timer and idle indicators. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> @@ -20,7 +21,6 @@ #include <asm/mach-types.h> #include <plat/fpga.h> -#include <mach/gpio.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 499d7ad8697d..da09f4364979 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -3,14 +3,13 @@ * * LED driver for OSK with optional Mistral QVGA board */ +#include <linux/gpio.h> #include <linux/init.h> #include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> -#include <mach/gpio.h> - #include "leds.h" diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 22eb11dde9e7..ae6dd93b8ddc 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -3,13 +3,13 @@ * * OMAP LEDs dispatcher */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <mach/gpio.h> #include <plat/mux.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 550ca9d9991d..93ae8f29727e 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +24,6 @@ #include <plat/board.h> #include <plat/mux.h> -#include <mach/gpio.h> #include <plat/fpga.h> #include "pm.h" diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 69d698c6c5df..d704f0ac328d 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -238,7 +238,8 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap2_pmic_init("twl4030", &sdp2430_twldata); + omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, + &sdp2430_twldata); return 0; } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 32a3a7fe0e95..515646886b59 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -133,7 +133,7 @@ static const int sdp4430_keymap[] = { KEY(7, 6, KEY_OK), KEY(7, 7, KEY_DOWN), }; -static struct omap_device_pad keypad_pads[] __initdata = { +static struct omap_device_pad keypad_pads[] = { { .name = "kpd_col1.kpd_col1", .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, }, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index e8d45d3bd3e0..7ac546219e5d 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,7 +15,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> @@ -25,7 +25,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 9a114bd910b1..c12666ee7017 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 2a2545153d15..e179da0c4da5 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 10adf66be7ba..7279ec075737 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -8,7 +8,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -26,7 +26,6 @@ #include <plat/tc.h> #include <plat/board.h> #include <plat/mcbsp.h> -#include <mach/gpio.h> #include <plat/mmc.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index cc8791952a05..2dc002a388b3 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -137,8 +137,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -156,8 +155,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, else reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); timeout = jiffies + msecs_to_jiffies(5); @@ -171,16 +169,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err("Pbias Voltage is not same as LDO\n"); /* Caution : On VMODE_ERROR Power Down MMC IO */ - reg &= ~(OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + reg &= ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } else { reg = omap4_ctrl_pad_readl(control_pbias_offset); reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 48adfe9fe4f3..13f98e59cfef 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,15 +13,10 @@ #include <linux/serial_reg.h> -#include <asm/memory.h> - #include <plat/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) -#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) -#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) - .pushsection .data omap_uart_phys: .word 0 omap_uart_virt: .word 0 @@ -34,26 +29,25 @@ omap_uart_lsr: .word 0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* Use omap_uart_phys/virt if already configured */ -10: mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rp, =omap_uart_phys @ MMU enabled - add \rv, \rp, #4 @ omap_uart_virt - ldr \rp, [\rp, #0] - ldr \rv, [\rv, #0] +10: adr \rp, 99f @ get effective addr of 99f + ldr \rv, [\rp] @ get absolute addr of 99f + sub \rv, \rv, \rp @ offset between the two + ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys + sub \tmp, \rp, \rv @ make it effective + ldr \rp, [\tmp, #0] @ omap_uart_phys + ldr \rv, [\tmp, #4] @ omap_uart_virt cmp \rp, #0 @ is port configured? cmpne \rv, #0 - bne 99f @ already configured + bne 100f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled - ldr \rp, [\rp, #0] + mov \rp, pc + ldr \rv, =OMAP_UART_INFO_OFS + and \rp, \rp, #0xff000000 + ldr \rp, [\rp, \rv] /* Select the UART to use based on the UART1 scratchpad value */ cmp \rp, #0 @ no port configured? @@ -106,50 +100,47 @@ omap_uart_lsr: .word 0 b 98f 83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE) b 98f + 95: ldr \rp, =ZOOM_UART_BASE - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys ldr \rp, =ZOOM_UART_VIRT - add \rv, \rv, #4 @ omap_uart_virt - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT) - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #8] @ omap_uart_lsr b 10b /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0x48000000 @ phys base - mrc p15, 0, \rv, c1, c0 - tst \rv, #1 @ MMU enabled? - ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled - ldrne \rv, =omap_uart_phys @ MMU enabled - str \rp, [\rv, #0] + str \rp, [\tmp, #0] @ omap_uart_phys sub \rp, \rp, #0x48000000 @ phys base add \rp, \rp, #0xfa000000 @ virt base - add \rv, \rv, #4 @ omap_uart_virt - str \rp, [\rv, #0] + str \rp, [\tmp, #4] @ omap_uart_virt mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) - add \rv, \rv, #4 @ omap_uart_lsr - str \rp, [\rv, #0] + str \rp, [\tmp, #8] @ omap_uart_lsr b 10b -99: + + .align +99: .word . + .word omap_uart_phys + .ltorg + +100: /* Pass the UART_LSR reg address */ + ldr \tmp, [\tmp, #8] @ omap_uart_lsr + add \rp, \rp, \tmp + add \rv, \rv, \tmp .endm .macro senduart,rd,rx - strb \rd, [\rx] + orr \rd, \rd, \rx, lsl #24 @ preserve LSR reg offset + bic \rx, \rx, #0xff @ get base (THR) reg address + strb \rd, [\rx] @ send lower byte of rd + orr \rx, \rx, \rd, lsr #24 @ restore original rx (LSR) + bic \rd, \rd, #(0xff << 24) @ restore original rd .endm .macro busyuart,rd,rx -1001: mrc p15, 0, \rd, c1, c0 - tst \rd, #1 @ MMU enabled? - ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled - ldrne \rd, =omap_uart_lsr @ MMU enabled - ldr \rd, [\rd, #0] - ldrb \rd, [\rx, \rd] +1001: ldrb \rd, [\rx] @ rx contains UART_LSR address and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) bne 1001b diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h deleted file mode 100644 index ca6d32a917dd..000000000000 --- a/arch/arm/mach-omap2/include/mach/memory.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/memory.h - */ - -#include <plat/memory.h> diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 3a12f7586a4c..65f1be6a182c 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -165,8 +165,8 @@ static void __init omap_init_irq(u32 base, int nr_irqs) omap_irq_bank_init_one(bank); - for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20) - omap_alloc_gc(bank->base_reg + j, i, 32); + for (j = 0; j < bank->nr_irqs; j += 32) + omap_alloc_gc(bank->base_reg + j, j, 32); nr_of_irqs += bank->nr_irqs; nr_banks++; diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index a65145b02a55..19e4dac62a8c 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -137,9 +137,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (cpu_is_omap44xx()) - omap4430_phy_init(dev); - if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 88432aba972c..4b79a80d5e1f 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -9,7 +9,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,7 +21,6 @@ #include <linux/mv643xx_eth.h> #include <linux/i2c.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 9e5c1663fc4f..343f60e9639f 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -13,7 +13,7 @@ * License, or (at your option) any later version. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> @@ -30,7 +30,6 @@ #include <linux/phy.h> #include <linux/marvell_phy.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S index 5e3bf5b68aec..f340ed8f8dd0 100644 --- a/arch/arm/mach-orion5x/include/mach/debug-macro.S +++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S @@ -10,7 +10,7 @@ #include <mach/orion5x.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =ORION5X_REGS_PHYS_BASE ldr \rv, =ORION5X_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h deleted file mode 100644 index 6769917882fe..000000000000 --- a/arch/arm/mach-orion5x/include/mach/memory.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/memory.h - * - * Marvell Orion memory definitions - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 43cf8bc9767b..b1b45fff776e 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -9,12 +9,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> -#include <asm/gpio.h> #include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 9115511dc035..d3cd3f63258a 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,7 +21,6 @@ #include <linux/serial_reg.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index b3356ada64b9..201ae3676289 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -7,7 +7,7 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/i2c.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <mach/orion5x.h> #include "common.h" diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 8c876664f494..ebd6767d8e88 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -18,7 +18,6 @@ #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 994644f59d8d..05db2d336b08 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -19,7 +19,6 @@ #include <linux/i2c.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 1903d25ecae9..e47fa0578ae3 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -9,7 +9,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/ata_platform.h> #include <linux/i2c.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index e06fdae77f0a..64317251ec00 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,7 +21,6 @@ #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 306183273eb9..29f1526f7b70 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/i2c.h> #include <linux/serial_reg.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 3dbcd5ed77ef..31e51f9b4b64 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -23,7 +23,6 @@ #include <linux/serial_reg.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 23c9e2e5e550..0fbcc14e09d7 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -11,7 +11,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -25,7 +25,6 @@ #include <linux/i2c.h> #include <linux/serial_reg.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 1c63a76f3ca3..b8be7d8d0cf4 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -5,7 +5,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -17,7 +17,6 @@ #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 4fd9f18c9d5d..faf81a039360 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -5,7 +5,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/input.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c index f219914f5b29..d3e71d3847b4 100644 --- a/arch/arm/mach-pnx4008/gpio.c +++ b/arch/arm/mach-pnx4008/gpio.c @@ -13,14 +13,13 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ - #include <linux/types.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/io.h> #include <mach/hardware.h> #include <mach/platform.h> -#include <mach/gpio.h> +#include <mach/gpio-pnx4008.h> /* register definitions */ #define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE) diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S index 931afebaf064..469d60d97f5c 100644 --- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00090000 add \rv, \rp, #0xf4000000 @ virtual add \rp, \rp, #0x40000000 @ physical diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h index 9591467eb9ec..41027dd7cf74 100644 --- a/arch/arm/mach-pnx4008/include/mach/gpio.h +++ b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h @@ -1,5 +1,5 @@ /* - * arch/arm/mach-pnx4008/include/mach/gpio.h + * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h * * PNX4008 GPIO driver - header file * diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h deleted file mode 100644 index 1275db61cee5..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/memory.h - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x80000000) - -#endif diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c index f40961e51914..374c138ac1ac 100644 --- a/arch/arm/mach-pnx4008/serial.c +++ b/arch/arm/mach-pnx4008/serial.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/io.h> @@ -19,8 +18,8 @@ #include <linux/serial_core.h> #include <linux/serial_reg.h> -#include <mach/gpio.h> +#include <mach/gpio-pnx4008.h> #include <mach/clock.h> #define UART_3 0 diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S index bf75106333ff..cd97492bb075 100644 --- a/arch/arm/mach-prima2/include/mach/debug-macro.S +++ b/arch/arm/mach-prima2/include/mach/debug-macro.S @@ -9,7 +9,7 @@ #include <mach/hardware.h> #include <mach/uart.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual .endm diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h deleted file mode 100644 index 368cd5a0601a..000000000000 --- a/arch/arm/mach-prima2/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/memory.h - * - * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -/* - * Restrict DMA-able region to workaround silicon limitation. - * The limitation restricts buffers available for DMA to SD/MMC - * hardware to be below 256MB - */ -#define ARM_DMA_ZONE_SIZE (SZ_256M) - -#endif diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c index 9cda2057bcfb..66c6387e5a04 100644 --- a/arch/arm/mach-prima2/l2x0.c +++ b/arch/arm/mach-prima2/l2x0.c @@ -13,7 +13,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/memory.h> #define L2X0_ADDR_FILTERING_START 0xC00 #define L2X0_ADDR_FILTERING_END 0xC04 @@ -41,9 +40,9 @@ static int __init sirfsoc_of_l2x_init(void) /* * set the physical memory windows L2 cache will cover */ - writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024, + writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024, sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END); - writel_relaxed(PLAT_PHYS_OFFSET | 0x1, + writel_relaxed(PHYS_OFFSET | 0x1, sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START); writel_relaxed(0, diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index a3918d9994af..ef555c041962 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -36,6 +36,7 @@ MACHINE_START(PRIMA2_EVB, "prima2cb") .map_io = sirfsoc_map_lluart, .init_irq = sirfsoc_of_irq_init, .timer = &sirfsoc_timer, + .dma_zone_size = SZ_256M, .init_machine = sirfsoc_mach_init, .dt_compat = prima2cb_dt_match, MACHINE_END diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index cd19309fd3b8..61d3c72ded84 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -2,6 +2,27 @@ if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" +config ARCH_PXA_V7 + bool "ARMv7 (PXA95x) based systems" + +if ARCH_PXA_V7 +comment "Marvell Dev Platforms (sorted by hardware release time)" +config MACH_TAVOREVB3 + bool "PXA95x Development Platform (aka TavorEVB III)" + select CPU_PXA955 + +config MACH_SAARB + bool "PXA955 Handheld Platform (aka SAARB)" + select CPU_PXA955 +endif + +config PXA_V7_MACH_AUTO + def_bool y + depends on ARCH_PXA_V7 + depends on !MACH_SAARB + select MACH_TAVOREVB3 + +if !ARCH_PXA_V7 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config ARCH_LUBBOCK @@ -41,19 +62,11 @@ config MACH_TAVOREVB select PXA3xx select CPU_PXA930 -config MACH_TAVOREVB3 - bool "PXA95x Development Platform (aka TavorEVB III)" - select CPU_PXA950 - config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx select CPU_PXA930 -config MACH_SAARB - bool "PXA955 Handheld Platform (aka SAARB)" - select CPU_PXA955 - comment "Third Party Dev Platforms (sorted by vendor name)" config ARCH_PXA_IDP @@ -414,6 +427,7 @@ config MACH_CENTRO bool "Palm Centro 685 (GSM)" default y depends on ARCH_PXA_PALM + select MACH_PALM27X select PXA27x select IWMMXT select PALM_TREO @@ -425,6 +439,7 @@ config MACH_TREO680 bool "Palm Treo 680" default y depends on ARCH_PXA_PALM + select MACH_PALM27X select PXA27x select IWMMXT select PALM_TREO @@ -436,15 +451,18 @@ config MACH_RAUMFELD_RC bool "Raumfeld Controller" select PXA3xx select CPU_PXA300 + select POWER_SUPPLY select HAVE_PWM config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" + select POWER_SUPPLY select PXA3xx select CPU_PXA300 config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" + select POWER_SUPPLY select PXA3xx select CPU_PXA300 @@ -598,7 +616,7 @@ config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select PXA27x select HAVE_PWM - +endif endmenu config PXA25x @@ -688,6 +706,8 @@ config SHARPSL_PM config SHARPSL_PM_MAX1111 bool select HWMON + select SPI + select SPI_MASTER select SENSORS_MAX1111 config PXA_HAVE_ISA_IRQS diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index cc39d17b2e07..be0f7df8685c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -19,7 +19,7 @@ endif obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o -obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o +obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 7765d677adbb..fc0b8544e174 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -591,7 +591,7 @@ static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ct BALLOON3_NAND_CONTROL_REG); if (balloon3_ctl_set) __raw_writel(balloon3_ctl_set, - BALLOON3_NAND_CONTROL_REG | + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); } @@ -608,7 +608,7 @@ static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) __raw_writew( BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3, - BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); /* Deassert correct nCE line */ __raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip, @@ -626,7 +626,7 @@ static int balloon3_nand_probe(struct platform_device *pdev) int ret; __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, - BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR); ver = __raw_readw(BALLOON3_FPGA_VER); if (ver < 0x4f08) @@ -649,7 +649,7 @@ static int balloon3_nand_probe(struct platform_device *pdev) BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 | BALLOON3_NAND_CONTROL_FLWP, - BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); return 0; err2: @@ -807,7 +807,7 @@ static void __init balloon3_init(void) static struct map_desc balloon3_io_desc[] __initdata = { { /* CPLD/FPGA */ - .virtual = BALLOON3_FPGA_VIRT, + .virtual = (unsigned long)BALLOON3_FPGA_VIRT, .pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS), .length = BALLOON3_FPGA_LENGTH, .type = MT_DEVICE, diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index 93f59f877fc6..be751470d37b 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -11,7 +11,6 @@ #include <linux/platform_device.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/nand-gpio.h> diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 6bf479d9b5ac..ebd9259f5ac9 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -26,7 +26,7 @@ #include <asm/hardware/it8152.h> -unsigned long it8152_base_address; +void __iomem *it8152_base_address; static int cmx2xx_it8152_irq_gpio; static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 349896c53abd..f2e4190080cb 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -39,7 +39,7 @@ extern void cmx270_init(void); #define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40) /* virtual addresses for statically mapped regions */ -#define CMX2XX_VIRT_BASE (0xe8000000) +#define CMX2XX_VIRT_BASE (void __iomem *)(0xe8000000) #define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE) /* physical address if local-bus attached devices */ @@ -482,7 +482,7 @@ static void __init cmx2xx_init_irq(void) /* Map PCI companion statically */ static struct map_desc cmx2xx_io_desc[] __initdata = { [0] = { /* PCI bridge */ - .virtual = CMX2XX_IT8152_VIRT, + .virtual = (unsigned long)CMX2XX_IT8152_VIRT, .pfn = __phys_to_pfn(PXA_CS4_PHYS), .length = SZ_64M, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 9ac0225cd51b..e40dc47cf2f1 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -775,7 +775,6 @@ static struct gpio cm_x300_wi2wi_gpios[] __initdata = { static void __init cm_x300_init_wi2wi(void) { - int bt_reset, wlan_en; int err; if (system_rev < 130) { @@ -791,12 +790,11 @@ static void __init cm_x300_init_wi2wi(void) } udelay(10); - gpio_set_value(bt_reset, 0); + gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0); udelay(10); - gpio_set_value(bt_reset, 1); + gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1); - gpio_free(wlan_en); - gpio_free(bt_reset); + gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios)); } /* MFP */ diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index f5d91efc2965..5432ecb15def 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -26,7 +27,6 @@ #include <asm/mach-types.h> #include <mach/reset.h> -#include <mach/gpio.h> #include <mach/smemc.h> #include <mach/pxa3xx-regs.h> diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h index f4c03659168c..bbf9df37ad4b 100644 --- a/arch/arm/mach-pxa/include/mach/addr-map.h +++ b/arch/arm/mach-pxa/include/mach/addr-map.h @@ -20,7 +20,7 @@ * Peripheral Bus */ #define PERIPH_PHYS 0x40000000 -#define PERIPH_VIRT 0xf2000000 +#define PERIPH_VIRT IOMEM(0xf2000000) #define PERIPH_SIZE 0x02000000 /* @@ -28,21 +28,21 @@ */ #define PXA2XX_SMEMC_PHYS 0x48000000 #define PXA3XX_SMEMC_PHYS 0x4a000000 -#define SMEMC_VIRT 0xf6000000 +#define SMEMC_VIRT IOMEM(0xf6000000) #define SMEMC_SIZE 0x00100000 /* * Dynamic Memory Controller (only on PXA3xx) */ #define DMEMC_PHYS 0x48100000 -#define DMEMC_VIRT 0xf6100000 +#define DMEMC_VIRT IOMEM(0xf6100000) #define DMEMC_SIZE 0x00100000 /* * Internal Memory Controller (PXA27x and later) */ #define IMEMC_PHYS 0x58000000 -#define IMEMC_VIRT 0xfe000000 +#define IMEMC_VIRT IOMEM(0xfe000000) #define IMEMC_SIZE 0x00100000 #endif /* __ASM_MACH_ADDR_MAP_H */ diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 7074e76146c9..6d7eab3d0867 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -23,7 +23,7 @@ enum balloon3_features { }; #define BALLOON3_FPGA_PHYS PXA_CS4_PHYS -#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */ +#define BALLOON3_FPGA_VIRT IOMEM(0xf1000000) /* as per balloon2 */ #define BALLOON3_FPGA_LENGTH 0x01000000 #define BALLOON3_FPGA_SETnCLR (0x1000) diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S index 7d5c75125d65..70b112e8ef68 100644 --- a/arch/arm/mach-pxa/include/mach/debug-macro.S +++ b/arch/arm/mach-pxa/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include "hardware.h" - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00100000 orr \rv, \rp, #io_p2v(0x40000000) @ virtual orr \rp, \rp, #0x40000000 @ physical diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h new file mode 100644 index 000000000000..576868f8b8c5 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h @@ -0,0 +1,133 @@ +/* + * Written by Philipp Zabel <philipp.zabel@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __MACH_PXA_GPIO_PXA_H +#define __MACH_PXA_GPIO_PXA_H + +#include <mach/irqs.h> +#include <mach/hardware.h> + +#define GPIO_REGS_VIRT io_p2v(0x40E00000) + +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) + +/* GPIO Pin Level Registers */ +#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) +#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) +#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) +#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) + +/* GPIO Pin Direction Registers */ +#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) +#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) +#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) +#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) + +/* GPIO Pin Output Set Registers */ +#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) +#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) +#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) +#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) + +/* GPIO Pin Output Clear Registers */ +#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) +#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) +#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) +#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) + +/* GPIO Rising Edge Detect Registers */ +#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) +#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) +#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) +#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) + +/* GPIO Falling Edge Detect Registers */ +#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) +#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) +#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) +#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) + +/* GPIO Edge Detect Status Registers */ +#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) +#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) +#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) +#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) + +/* GPIO Alternate Function Select Registers */ +#define GAFR0_L GPIO_REG(0x0054) +#define GAFR0_U GPIO_REG(0x0058) +#define GAFR1_L GPIO_REG(0x005C) +#define GAFR1_U GPIO_REG(0x0060) +#define GAFR2_L GPIO_REG(0x0064) +#define GAFR2_U GPIO_REG(0x0068) +#define GAFR3_L GPIO_REG(0x006C) +#define GAFR3_U GPIO_REG(0x0070) + +/* More handy macros. The argument is a literal GPIO number. */ + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) +#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) +#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) +#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) +#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) + + +#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM + +#define gpio_to_bank(gpio) ((gpio) >> 5) + +#ifdef CONFIG_CPU_PXA26x +/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, + * as well as their Alternate Function value being '1' for GPIO in GAFRx. + */ +static inline int __gpio_is_inverted(unsigned gpio) +{ + return cpu_is_pxa25x() && gpio > 85; +} +#else +static inline int __gpio_is_inverted(unsigned gpio) { return 0; } +#endif + +/* + * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate + * function of a GPIO, and GPDRx cannot be altered once configured. It + * is attributed as "occupied" here (I know this terminology isn't + * accurate, you are welcome to propose a better one :-) + */ +static inline int __gpio_is_occupied(unsigned gpio) +{ + if (cpu_is_pxa27x() || cpu_is_pxa25x()) { + int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; + int dir = GPDR(gpio) & GPIO_bit(gpio); + + if (__gpio_is_inverted(gpio)) + return af != 1 || dir == 0; + else + return af != 0 || dir != 0; + } else + return GPDR(gpio) & GPIO_bit(gpio); +} + +#include <plat/gpio-pxa.h> +#endif /* __MACH_PXA_GPIO_PXA_H */ diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index c4639502efca..004cade7bb13 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -24,84 +24,10 @@ #ifndef __ASM_ARCH_PXA_GPIO_H #define __ASM_ARCH_PXA_GPIO_H -#include <mach/irqs.h> -#include <mach/hardware.h> #include <asm-generic/gpio.h> +/* The defines for the driver are needed for the accelerated accessors */ +#include "gpio-pxa.h" -#define GPIO_REGS_VIRT io_p2v(0x40E00000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -/* GPIO Pin Level Registers */ -#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) -#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) -#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) -#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) - -/* GPIO Pin Direction Registers */ -#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) -#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) -#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) -#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) - -/* GPIO Pin Output Set Registers */ -#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) -#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) -#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) -#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) - -/* GPIO Pin Output Clear Registers */ -#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) -#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) -#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) -#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) - -/* GPIO Rising Edge Detect Registers */ -#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) -#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) -#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) -#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) - -/* GPIO Falling Edge Detect Registers */ -#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) -#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) -#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) -#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) - -/* GPIO Edge Detect Status Registers */ -#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) -#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) -#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) -#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) - -/* GPIO Alternate Function Select Registers */ -#define GAFR0_L GPIO_REG(0x0054) -#define GAFR0_U GPIO_REG(0x0058) -#define GAFR1_L GPIO_REG(0x005C) -#define GAFR1_U GPIO_REG(0x0060) -#define GAFR2_L GPIO_REG(0x0064) -#define GAFR2_U GPIO_REG(0x0068) -#define GAFR3_L GPIO_REG(0x006C) -#define GAFR3_U GPIO_REG(0x0070) - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) -#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) -#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) -#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) -#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) - - -#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM - -#define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) static inline int irq_to_gpio(unsigned int irq) @@ -118,37 +44,5 @@ static inline int irq_to_gpio(unsigned int irq) return -1; } -#ifdef CONFIG_CPU_PXA26x -/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, - * as well as their Alternate Function value being '1' for GPIO in GAFRx. - */ -static inline int __gpio_is_inverted(unsigned gpio) -{ - return cpu_is_pxa25x() && gpio > 85; -} -#else -static inline int __gpio_is_inverted(unsigned gpio) { return 0; } -#endif - -/* - * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate - * function of a GPIO, and GPDRx cannot be altered once configured. It - * is attributed as "occupied" here (I know this terminology isn't - * accurate, you are welcome to propose a better one :-) - */ -static inline int __gpio_is_occupied(unsigned gpio) -{ - if (cpu_is_pxa27x() || cpu_is_pxa25x()) { - int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; - int dir = GPDR(gpio) & GPIO_bit(gpio); - - if (__gpio_is_inverted(gpio)) - return af != 1 || dir == 0; - else - return af != 0 || dir != 0; - } else - return GPDR(gpio) & GPIO_bit(gpio); -} - #include <plat/gpio.h> #endif diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index de63ca3016b4..8184669dde28 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -36,22 +36,23 @@ * Note that not all PXA2xx chips implement all those addresses, and the * kernel only maps the minimum needed range of this mapping. */ -#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) #define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) +#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) #ifndef __ASSEMBLY__ - -# define __REG(x) (*((volatile u32 *)io_p2v(x))) +# define IOMEM(x) ((void __iomem *)(x)) +# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) /* With indexed regs we don't want to feed the index through io_p2v() especially if it is a variable, otherwise horrible code will result. */ # define __REG2(x,y) \ - (*(volatile u32 *)((u32)&__REG(x) + (y))) + (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) # define __PREG(x) (io_v2p((u32)&(x))) #else +# define IOMEM(x) x # define __REG(x) io_p2v(x) # define __PREG(x) io_v2p(x) diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h index 2a5726c15e0e..b6238cbd8aea 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -1,7 +1,7 @@ #ifndef __ASM_ARCH_LITTLETON_H #define __ASM_ARCH_LITTLETON_H -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #define LITTLETON_ETH_PHYS 0x30000000 diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h index cd070092b6eb..4edc712a2de8 100644 --- a/arch/arm/mach-pxa/include/mach/lpd270.h +++ b/arch/arm/mach-pxa/include/mach/lpd270.h @@ -13,13 +13,13 @@ #define __ASM_ARCH_LPD270_H #define LPD270_CPLD_PHYS PXA_CS2_PHYS -#define LPD270_CPLD_VIRT 0xf0000000 +#define LPD270_CPLD_VIRT IOMEM(0xf0000000) #define LPD270_CPLD_SIZE 0x00100000 #define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000) /* CPLD registers */ -#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x))) +#define LPD270_CPLD_REG(x) (LPD270_CPLD_VIRT + (x)) #define LPD270_CONTROL LPD270_CPLD_REG(0x00) #define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04) #define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08) diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h deleted file mode 100644 index d05a59727d66..000000000000 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/memory.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0xa0000000) - -#endif diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index 297387ec3618..990d2bf2fb45 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -16,7 +16,6 @@ #define __ARCH_PXA_MTD_XIP_H__ #include <mach/regs-ost.h> -#include <mach/regs-intc.h> #define xip_irqpending() (ICIP & ICMR) diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h index 0a5e5eadebf5..f80bbe246afe 100644 --- a/arch/arm/mach-pxa/include/mach/palm27x.h +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -34,7 +34,7 @@ extern struct pxafb_mode_info palm_320x320_new_lcd_mode; extern void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode); #else -static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {} +#define palm27x_lcd_init(power, mode) do {} while (0) #endif #if defined(CONFIG_USB_GADGET_PXA27X) || \ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 10abc4f2e8e4..7074a6ed46c6 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -71,7 +71,7 @@ /* Various addresses */ #define PALMTX_PCMCIA_PHYS 0x28000000 -#define PALMTX_PCMCIA_VIRT 0xf0000000 +#define PALMTX_PCMCIA_VIRT IOMEM(0xf0000000) #define PALMTX_PCMCIA_SIZE 0x100000 #define PALMTX_PHYS_RAM_START 0xa0000000 @@ -84,8 +84,8 @@ #define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24)) #define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25)) -#define PALMTX_NAND_ALE_VIRT 0xff100000 -#define PALMTX_NAND_CLE_VIRT 0xff200000 +#define PALMTX_NAND_ALE_VIRT IOMEM(0xff100000) +#define PALMTX_NAND_CLE_VIRT IOMEM(0xff200000) /* TOUCHSCREEN */ #define AC97_LINK_FRAME 21 diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index b9b1bdc4bacc..7cff640582b8 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -1,6 +1,7 @@ #ifndef __MACH_PXA27x_H #define __MACH_PXA27x_H +#include <linux/suspend.h> #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa27x.h> @@ -21,6 +22,7 @@ extern void __init pxa27x_map_io(void); extern void __init pxa27x_init_irq(void); extern int __init pxa27x_set_pwrmode(unsigned int mode); +extern void pxa27x_cpu_pm_enter(suspend_state_t state); #define pxa27x_handle_irq ichp_handle_irq diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h new file mode 100644 index 000000000000..cbb097c4cb1f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa95x.h @@ -0,0 +1,7 @@ +#ifndef __MACH_PXA95X_H +#define __MACH_PXA95X_H + +#include <mach/pxa3xx.h> +#include <mach/mfp-pxa930.h> + +#endif /* __MACH_PXA95X_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 01a45ac48114..486b4c519ae2 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -158,5 +158,18 @@ struct pxafb_mach_info { void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); unsigned long pxafb_get_hsync_time(struct device *dev); +#ifdef CONFIG_FB_PXA_SMARTPANEL extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); extern int pxafb_smart_flush(struct fb_info *info); +#else +static inline int pxafb_smart_queue(struct fb_info *info, + uint16_t *cmds, int n) +{ + return 0; +} + +static inline int pxafb_smart_flush(struct fb_info *info) +{ + return 0; +} +#endif diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h index 654adc90c9a0..b7de471b273a 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/include/mach/smemc.h @@ -13,7 +13,7 @@ #define PXA2XX_SMEMC_BASE 0x48000000 #define PXA3XX_SMEMC_BASE 0x4a000000 -#define SMEMC_VIRT 0xf6000000 +#define SMEMC_VIRT IOMEM(0xf6000000) #define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */ #define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */ diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index 0641f31a56b7..56024f81d57e 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -68,7 +68,7 @@ * Be gentle, and remap that over 32kB... */ -#define ZEUS_CPLD (0xf0000000) +#define ZEUS_CPLD IOMEM(0xf0000000) #define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000) #define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000) #define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000) @@ -76,7 +76,7 @@ /* CPLD register bits */ #define ZEUS_CPLD_CONTROL_CF_RST 0x01 -#define ZEUS_PC104IO (0xf1000000) +#define ZEUS_PC104IO IOMEM(0xf1000000) #define ZEUS_SRAM_SIZE (256 * 1024) diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h index ea24998b923c..ecca976f03d2 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -19,7 +19,7 @@ extern int wm9713_irq; extern int lcd_id; extern int lcd_orientation; -#ifdef CONFIG_CPU_PXA300 +#ifdef CONFIG_MACH_ZYLONITE300 extern void zylonite_pxa300_init(void); #else static inline void zylonite_pxa300_init(void) @@ -29,7 +29,7 @@ static inline void zylonite_pxa300_init(void) } #endif -#ifdef CONFIG_CPU_PXA320 +#ifdef CONFIG_MACH_ZYLONITE320 extern void zylonite_pxa320_init(void); #else static inline void zylonite_pxa320_init(void) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index b09e848eb6c6..25f29adf5114 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -11,7 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -21,11 +20,11 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include "generic.h" -#define IRQ_BASE (void __iomem *)io_p2v(0x40d00000) +#define IRQ_BASE io_p2v(0x40d00000) #define ICIP (0x000) #define ICMR (0x004) @@ -63,7 +62,7 @@ static inline void __iomem *irq_base(int i) 0x40d00130, }; - return (void __iomem *)io_p2v(phys_base[i]); + return io_p2v(phys_base[i]); } void pxa_mask_irq(struct irq_data *d) diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 16df0fc0879a..1dd530279e0b 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -12,7 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> @@ -39,7 +39,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <mach/gpio.h> #include <mach/lpd270.h> #include <mach/audio.h> #include <mach/pxafb.h> @@ -480,7 +479,7 @@ static void __init lpd270_init(void) static struct map_desc lpd270_io_desc[] __initdata = { { - .virtual = LPD270_CPLD_VIRT, + .virtual = (unsigned long)LPD270_CPLD_VIRT, .pfn = __phys_to_pfn(LPD270_CPLD_PHYS), .length = LPD270_CPLD_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index a8c696bfc132..c48ce6da9184 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -42,7 +43,6 @@ #include <asm/hardware/sa1111.h> #include <mach/pxa25x.h> -#include <mach/gpio.h> #include <mach/audio.h> #include <mach/lubbock.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index cc6e14f6d114..0567d3965fda 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -12,7 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> @@ -43,7 +43,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <mach/gpio.h> #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index b27544bcafcb..43a5f6861ca3 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -12,15 +12,15 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/syscore_ops.h> -#include <mach/gpio.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa2xx.h> +#include <mach/gpio-pxa.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 7346fbfa8101..94e9708b349d 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -423,6 +423,7 @@ static void __init palmphone_common_init(void) palmtreo_leds_init(); } +#ifdef CONFIG_MACH_TREO680 static void __init treo680_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); @@ -430,7 +431,9 @@ static void __init treo680_init(void) palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY, GPIO_NR_TREO680_SD_POWER, 0); } +#endif +#ifdef CONFIG_MACH_CENTRO static void __init centro_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config)); @@ -438,7 +441,9 @@ static void __init centro_init(void) palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1, GPIO_NR_CENTRO_SD_POWER, 1); } +#endif +#ifdef CONFIG_MACH_TREO680 MACHINE_START(TREO680, "Palm Treo 680") .atag_offset = 0x100, .map_io = pxa27x_map_io, @@ -448,7 +453,9 @@ MACHINE_START(TREO680, "Palm Treo 680") .timer = &pxa_timer, .init_machine = treo680_init, MACHINE_END +#endif +#ifdef CONFIG_MACH_CENTRO MACHINE_START(CENTRO, "Palm Centro 685") .atag_offset = 0x100, .map_io = pxa27x_map_io, @@ -458,3 +465,4 @@ MACHINE_START(CENTRO, "Palm Centro 685") .timer = &pxa_timer, .init_machine = centro_init, MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 2b9e76fc2c90..4e3e45927e95 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -247,7 +247,7 @@ static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; + char __iomem *nandaddr = this->IO_ADDR_W; if (cmd == NAND_CMD_NONE) return; @@ -315,17 +315,17 @@ static inline void palmtx_nand_init(void) {} ******************************************************************************/ static struct map_desc palmtx_io_desc[] __initdata = { { - .virtual = PALMTX_PCMCIA_VIRT, + .virtual = (unsigned long)PALMTX_PCMCIA_VIRT, .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS), .length = PALMTX_PCMCIA_SIZE, .type = MT_DEVICE, }, { - .virtual = PALMTX_NAND_ALE_VIRT, + .virtual = (unsigned long)PALMTX_NAND_ALE_VIRT, .pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS), .length = SZ_1M, .type = MT_DEVICE, }, { - .virtual = PALMTX_NAND_CLE_VIRT, + .virtual = (unsigned long)PALMTX_NAND_CLE_VIRT, .pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS), .length = SZ_1M, .type = MT_DEVICE, diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6d5b7e062124..9a9c539f6c01 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -19,7 +19,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/i2c.h> @@ -28,7 +28,6 @@ #include <media/soc_camera.h> -#include <asm/gpio.h> #include <mach/camera.h> #include <asm/mach/map.h> #include <mach/pxa27x.h> diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 9c434d21a271..f05f9486b0cb 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -23,12 +24,12 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/mach/map.h> #include <asm/suspend.h> #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/pm.h> @@ -324,7 +325,7 @@ void __init pxa26x_init_irq(void) static struct map_desc pxa25x_io_desc[] __initdata = { { /* Mem Ctl */ - .virtual = SMEMC_VIRT, + .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE), .length = 0x00200000, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 9d2400b5f503..bc5a98ebaa72 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,13 +21,13 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> +#include <linux/gpio.h> #include <asm/mach/map.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/suspend.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/pxa27x.h> #include <mach/reset.h> #include <mach/ohci.h> @@ -390,7 +391,7 @@ void __init pxa27x_init_irq(void) static struct map_desc pxa27x_io_desc[] __initdata = { { /* Mem Ctl */ - .virtual = SMEMC_VIRT, + .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE), .length = 0x00200000, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index ce7168b233e2..e28dfb88827f 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -265,6 +265,7 @@ int pxa3xx_u2d_start_hc(struct usb_bus *host) return err; } +EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc); void pxa3xx_u2d_stop_hc(struct usb_bus *host) { @@ -277,6 +278,7 @@ void pxa3xx_u2d_stop_hc(struct usb_bus *host) clk_disable(u2d->clk); } +EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc); static int pxa3xx_u2d_probe(struct platform_device *pdev) { diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index b5cd9e5aba31..0737c59b88ae 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -12,7 +12,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -26,7 +25,7 @@ #include <asm/mach/map.h> #include <asm/suspend.h> #include <mach/hardware.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <mach/ohci.h> @@ -394,7 +393,7 @@ void __init pxa3xx_init_irq(void) static struct map_desc pxa3xx_io_desc[] __initdata = { { /* Mem Ctl */ - .virtual = SMEMC_VIRT, + .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE), .length = 0x00200000, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 0ee166b61f81..51371b39d2a3 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -21,7 +20,7 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/pxa930.h> #include <mach/reset.h> diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index 5ce340320ab9..3e999e308a2d 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -9,12 +9,13 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -23,7 +24,7 @@ #include <mach/hardware.h> #include <mach/mfp.h> #include <mach/mfp-pxa930.h> -#include <mach/gpio.h> +#include <mach/pxa95x.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 65fed3753fa2..ead32c90fec1 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -686,7 +686,8 @@ static void z2_power_off(void) */ PSPR = 0x0; local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); + pxa27x_cpu_pm_enter(PM_SUSPEND_MEM); } #else #define z2_power_off NULL diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index c424e7d85ce3..498b83b089f3 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -860,25 +860,25 @@ static void __init zeus_init(void) static struct map_desc zeus_io_desc[] __initdata = { { - .virtual = ZEUS_CPLD_VERSION, + .virtual = (unsigned long)ZEUS_CPLD_VERSION, .pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS), .length = 0x1000, .type = MT_DEVICE, }, { - .virtual = ZEUS_CPLD_ISA_IRQ, + .virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ, .pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS), .length = 0x1000, .type = MT_DEVICE, }, { - .virtual = ZEUS_CPLD_CONTROL, + .virtual = (unsigned long)ZEUS_CPLD_CONTROL, .pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS), .length = 0x1000, .type = MT_DEVICE, }, { - .virtual = ZEUS_PC104IO, + .virtual = (unsigned long)ZEUS_PC104IO, .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS), .length = 0x00800000, .type = MT_DEVICE, diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 90b687cbe04e..fb4901c4ef04 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -33,7 +33,7 @@ #error "Unknown RealView platform" #endif - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rv, \rp, #0xfb000000 @ virtual base orr \rp, \rp, #0x10000000 @ physical base diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h index 94ff27678a46..40a8c178f10d 100644 --- a/arch/arm/mach-realview/include/mach/gpio.h +++ b/arch/arm/mach-realview/include/mach/gpio.h @@ -1,6 +1 @@ -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +/* empty */ diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S index 85effffdc2b2..6d28cc99b124 100644 --- a/arch/arm/mach-rpc/include/mach/debug-macro.S +++ b/arch/arm/mach-rpc/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00010000 orr \rp, \rp, #0x00000fe0 orr \rv, \rp, #0xe0000000 @ virtual diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h deleted file mode 100644 index 3f33670dd012..000000000000 --- a/arch/arm/mach-s3c2400/include/mach/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-s3c2400/include/mach/memory.h - * from arch/arm/mach-rpc/include/mach/memory.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x0C000000) - -#endif diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S index 5882deaa56be..4135de87d1f7 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S @@ -19,7 +19,7 @@ #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C24XX_PA_UART ldr \rv, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index f7f6b07df30e..6fac70f3484e 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -11,11 +11,6 @@ * published by the Free Software Foundation. */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* some boards require extra gpio capacity to support external * devices that need GPIO. */ @@ -28,7 +23,6 @@ #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) #endif -#include <asm-generic/gpio.h> #include <mach/gpio-nrs.h> #include <mach/gpio-fns.h> diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h index 97e42bfce81e..fc897d3a056c 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h @@ -14,7 +14,7 @@ #ifndef __ASM_ARCH_H1940_LATCH_H #define __ASM_ARCH_H1940_LATCH_H -#include <mach/gpio.h> +#include <asm/gpio.h> #define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h deleted file mode 100644 index f92b97b89c0c..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/memory.h +++ /dev/null @@ -1,16 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/memory.h - * from arch/arm/mach-rpc/include/mach/memory.h - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x30000000) - -#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index a29e70550c70..c0c076a90f27 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -21,7 +21,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h index 0d46e994048a..6e34c2f6e670 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h @@ -12,11 +12,6 @@ * published by the Free Software Foundation. */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S3C64XX_GPIO_A_NR (8) #define S3C64XX_GPIO_B_NR (7) @@ -96,5 +91,3 @@ enum s3c_gpio_number { #define BOARD_NR_GPIOS 16 #define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) - -#include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h deleted file mode 100644 index b704669f95ff..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/memory.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x50000000) - -#endif diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S index 79b04e6a6f8e..e80ba3c69814 100644 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -15,7 +15,7 @@ #include <plat/regs-serial.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xE0000000 orr \rp, \rp, #0x00100000 ldr \rp, [\rp, #0x118 ] diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h index adb5f298ead8..06cd3c9b16ac 100644 --- a/arch/arm/mach-s5p64x0/include/mach/gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S5P6440_GPIO_A_NR (6) @@ -134,6 +129,4 @@ enum s5p6450_gpio_number { #define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h deleted file mode 100644 index b14cbc3f521b..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H __FILE__ - -#define PLAT_PHYS_OFFSET UL(0x20000000) - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index b2ba95ddf8e0..694f75937000 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -22,7 +22,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index 29a8a12d9b4f..5e1a924b595f 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -15,11 +15,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S5PC100_GPIO_A0_NR (8) #define S5PC100_GPIO_A1_NR (5) @@ -146,6 +141,4 @@ enum s5p_gpio_number { /* define the number of gpios we need to the one after the MP04() range */ #define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h deleted file mode 100644 index bda4e79fd5fc..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/memory.h - * - * Copyright 2008 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Based on mach-s3c6400/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x20000000) - -#endif diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 169fe654a59e..79e55597ab63 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -21,7 +21,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, = S3C_PA_UART ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index a5a1e331f8ed..6c8b903c02e4 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* Practically, GPIO banks up to MP03 are the configurable gpio banks */ /* GPIO bank sizes */ @@ -142,6 +137,4 @@ enum s5p_gpio_number { #define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 41252d22e659..73a5c6431792 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o +obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index e21f3470eece..5fa5ae1f39e1 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -9,6 +9,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +25,6 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <asm/irq.h> -#include <asm/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S index 0cd0fc9635b6..530772d937ad 100644 --- a/arch/arm/mach-sa1100/include/mach/debug-macro.S +++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S @@ -12,7 +12,7 @@ */ #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? moveq \rp, #0x80000000 @ physical base address diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h index 7befc104e9a9..703631887c94 100644 --- a/arch/arm/mach-sa1100/include/mach/gpio.h +++ b/arch/arm/mach-sa1100/include/mach/gpio.h @@ -28,6 +28,8 @@ #include <asm/irq.h> #include <asm-generic/gpio.h> +#define __ARM_GPIOLIB_COMPLEX + static inline int gpio_get_value(unsigned gpio) { if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) @@ -51,7 +53,5 @@ static inline void gpio_set_value(unsigned gpio, int value) #define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \ (IRQ_GPIO11 - 11 + gpio)) -#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \ - (irq - IRQ_GPIO11 + 11)) #endif diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index a473f55dc71f..20eb2bf2a42b 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0xe0000000 orr \rp, \rp, #0x000003f8 mov \rv, \rp diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index 2b1bb9e43dda..7bf0890e16ba 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -18,31 +18,15 @@ #ifdef CONFIG_GPIOLIB -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned int irq) { return -ENOSYS; } +#else + +#define __ARM_GPIOLIB_COMPLEX + #endif /* CONFIG_GPIOLIB */ #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h deleted file mode 100644 index 51735221ea19..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/memory.h - * - * Memory map for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#include <plat/memory.h> - -#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h deleted file mode 100644 index 781f088fc228..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/memory.h - * - * Memory map for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#include <plat/memory.h> - -#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 9c27b95b8d86..6db7d699ef1c 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -24,12 +24,10 @@ #include <mach/pinmux.h> #include "board.h" +#include "board-harmony.h" #ifdef CONFIG_TEGRA_PCI -/* GPIO 3 of the PMIC */ -#define EN_VDD_1V05_GPIO (TEGRA_NR_GPIOS + 2) - static int __init harmony_pcie_init(void) { struct regulator *regulator = NULL; @@ -38,11 +36,11 @@ static int __init harmony_pcie_init(void) if (!machine_is_harmony()) return 0; - err = gpio_request(EN_VDD_1V05_GPIO, "EN_VDD_1V05"); + err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05"); if (err) return err; - gpio_direction_output(EN_VDD_1V05_GPIO, 1); + gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1); regulator = regulator_get(NULL, "pex_clk"); if (IS_ERR_OR_NULL(regulator)) @@ -68,7 +66,7 @@ err_pcie: regulator_disable(regulator); regulator_put(regulator); err_reg: - gpio_free(EN_VDD_1V05_GPIO); + gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO); return err; } diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h index d85142edaf6b..139d96c93843 100644 --- a/arch/arm/mach-tegra/board-harmony.h +++ b/arch/arm/mach-tegra/board-harmony.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_HARMONY_H #define _MACH_TEGRA_BOARD_HARMONY_H +#include <mach/gpio-tegra.h> + #define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) #define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_)) @@ -31,6 +33,7 @@ #define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2 #define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0 #define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1 +#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2) void harmony_pinmux_init(void); int harmony_regulator_init(void); diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index d4ff39ddaeb3..42ce8639b90c 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_PAZ00_H #define _MACH_TEGRA_BOARD_PAZ00_H +#include <mach/gpio-tegra.h> + #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 #define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h index d8415e1a8434..15b6c57361be 100644 --- a/arch/arm/mach-tegra/board-seaboard.h +++ b/arch/arm/mach-tegra/board-seaboard.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_SEABOARD_H #define _MACH_TEGRA_BOARD_SEABOARD_H +#include <mach/gpio-tegra.h> + #define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 #define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 #define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6 diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c index 47c596cdbf32..bcb1916e68b9 100644 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -13,12 +13,11 @@ * GNU General Public License for more details. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <mach/pinmux.h> -#include <mach/gpio.h> #include "gpio-names.h" #include "board-trimslice.h" diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h index 7a7dee86b4da..50f128d87779 100644 --- a/arch/arm/mach-tegra/board-trimslice.h +++ b/arch/arm/mach-tegra/board-trimslice.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H #define _MACH_TEGRA_BOARD_TRIMSLICE_H +#include <mach/gpio-tegra.h> + #define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */ #define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */ diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index e0ebe65c1657..619abc63aee8 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -21,7 +21,7 @@ #include <mach/io.h> #include <mach/iomap.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =IO_APB_PHYS @ physical ldr \rv, =IO_APB_VIRT @ virtual orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF) diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h index 537db3aa81a7..87d37fdf5084 100644 --- a/arch/arm/mach-tegra/include/mach/memory.h +++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h @@ -1,10 +1,9 @@ /* - * arch/arm/mach-tegra/include/mach/memory.h + * arch/arm/mach-tegra/include/mach/gpio.h * * Copyright (C) 2010 Google, Inc. * * Author: - * Colin Cross <ccross@google.com> * Erik Gilling <konkers@google.com> * * This software is licensed under the terms of the GNU General Public @@ -18,11 +17,23 @@ * */ -#ifndef __MACH_TEGRA_MEMORY_H -#define __MACH_TEGRA_MEMORY_H +#ifndef __MACH_TEGRA_GPIO_TEGRA_H +#define __MACH_TEGRA_GPIO_TEGRA_H -/* physical offset of RAM */ -#define PLAT_PHYS_OFFSET UL(0) +#include <linux/types.h> +#include <mach/irqs.h> -#endif +#define TEGRA_NR_GPIOS INT_GPIO_NR + +#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) + +struct tegra_gpio_table { + int gpio; /* GPIO number */ + bool enable; /* Enable for GPIO at init? */ +}; +void tegra_gpio_config(struct tegra_gpio_table *table, int num); +void tegra_gpio_enable(int gpio); +void tegra_gpio_disable(int gpio); + +#endif diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h index 196f114dc241..e69de29bb2d1 100644 --- a/arch/arm/mach-tegra/include/mach/gpio.h +++ b/arch/arm/mach-tegra/include/mach/gpio.h @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/gpio.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_GPIO_H -#define __MACH_TEGRA_GPIO_H - -#include <linux/init.h> -#include <mach/irqs.h> - -#define TEGRA_NR_GPIOS INT_GPIO_NR - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) -#define TEGRA_IRQ_TO_GPIO(irq) ((irq) - INT_GPIO_BASE) - -static inline int gpio_to_irq(unsigned int gpio) -{ - if (gpio < TEGRA_NR_GPIOS) - return INT_GPIO_BASE + gpio; - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned int irq) -{ - if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR)) - return irq - INT_GPIO_BASE; - return -EINVAL; -} - -struct tegra_gpio_table { - int gpio; /* GPIO number */ - bool enable; /* Enable for GPIO at init? */ -}; - -void tegra_gpio_config(struct tegra_gpio_table *table, int num); -void tegra_gpio_enable(int gpio); -void tegra_gpio_disable(int gpio); - -#endif diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c index 88081bb3ec52..37576a721aeb 100644 --- a/arch/arm/mach-tegra/usb_phy.c +++ b/arch/arm/mach-tegra/usb_phy.c @@ -28,6 +28,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <asm/mach-types.h> +#include <mach/gpio-tegra.h> #include <mach/usb_phy.h> #include <mach/iomap.h> diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 966a5a06a58c..39e077e2f243 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -6,6 +6,7 @@ comment "ST-Ericsson Mobile Platform Products" config MACH_U300 bool "U300" + select GPIO_U300 comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 724037e2de3d..2f1d758133a7 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -38,6 +38,7 @@ #include <mach/hardware.h> #include <mach/syscon.h> #include <mach/dma_channels.h> +#include <mach/gpio-u300.h> #include "clock.h" #include "mmc.h" @@ -223,7 +224,7 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT2, .flags = IORESOURCE_IRQ, }, -#ifdef U300_COH901571_3 +#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) { .name = "gpio3", .start = IRQ_U300_GPIO_PORT3, @@ -236,6 +237,7 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT4, .flags = IORESOURCE_IRQ, }, +#endif #ifdef CONFIG_MACH_U300_BS335 { .name = "gpio5", @@ -250,7 +252,6 @@ static struct resource gpio_resources[] = { .flags = IORESOURCE_IRQ, }, #endif /* CONFIG_MACH_U300_BS335 */ -#endif /* U300_COH901571_3 */ }; static struct resource keypad_resources[] = { @@ -1495,11 +1496,35 @@ static struct platform_device i2c1_device = { .resource = i2c1_resources, }; +/* + * The different variants have a few different versions of the + * GPIO block, with different number of ports. + */ +static struct u300_gpio_platform u300_gpio_plat = { +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) + .variant = U300_GPIO_COH901335, + .ports = 3, +#endif +#ifdef CONFIG_MACH_U300_BS335 + .variant = U300_GPIO_COH901571_3_BS335, + .ports = 7, +#endif +#ifdef CONFIG_MACH_U300_BS365 + .variant = U300_GPIO_COH901571_3_BS365, + .ports = 5, +#endif + .gpio_base = 0, + .gpio_irq_base = IRQ_U300_GPIO_BASE, +}; + static struct platform_device gpio_device = { .name = "u300-gpio", .id = -1, .num_resources = ARRAY_SIZE(gpio_resources), .resource = gpio_resources, + .dev = { + .platform_data = &u300_gpio_plat, + }, }; static struct platform_device keypad_device = { @@ -1596,7 +1621,7 @@ void __init u300_init_irq(void) BUG_ON(IS_ERR(clk)); clk_enable(clk); - for (i = 0; i < NR_IRQS; i++) + for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S index df715707bead..8ae8e4ab34b0 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -10,7 +10,7 @@ */ #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp /* If we move the address using MMU, use this. */ ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h new file mode 100644 index 000000000000..0c2b2021951a --- /dev/null +++ b/arch/arm/mach-u300/include/mach/gpio-u300.h @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2007-2011 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * GPIO block resgister definitions and inline macros for + * U300 GPIO COH 901 335 or COH 901 571/3 + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#ifndef __MACH_U300_GPIO_U300_H +#define __MACH_U300_GPIO_U300_H + +/* + * Individual pin assignments for the B26/S26. Notice that the + * actual usage of these pins depends on the PAD MUX settings, that + * is why the same number can potentially appear several times. + * In the reference design each pin is only used for one purpose. + * These were determined by inspecting the B26/S26 schematic: + * 2/1911-ROA 128 1603 + */ +#ifdef CONFIG_MACH_U300_BS2X +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ +#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ +#define U300_GPIO_PIN_CAM_SLEEP 4 +#define U300_GPIO_PIN_CAM_REG_EN 5 +#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ +#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ +#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ +#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ +#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ +#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ +#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ +#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ +#endif + +/* + * Individual pin assignments for the B330/S330 and B365/S365. + * Notice that the actual usage of these pins depends on the + * PAD MUX settings, that is why the same number can potentially + * appear several times. In the reference design each pin is only + * used for one purpose. These were determined by inspecting the + * S365 schematic. + */ +#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ + defined(CONFIG_MACH_U300_BS335) +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_UART_CTS 2 +#define U300_GPIO_PIN_UART_RTS 3 +#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ +#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ +#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ +#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ + +#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ +#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ +#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ +#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ +#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ +#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ +#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ +#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ +#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ +#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ +#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ +#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ +#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ +#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ +#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ +#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ +#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ +#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ +#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ +#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ +#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ + +#ifdef CONFIG_MACH_U300_BS335 + +#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ +#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ +#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ +#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ +#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ +#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ +#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ +#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ +#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ +#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ +#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ +#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ +#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ +#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ +#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ +#endif + +#endif + +/** + * enum u300_gpio_variant - the type of U300 GPIO employed + */ +enum u300_gpio_variant { + U300_GPIO_COH901335, + U300_GPIO_COH901571_3_BS335, + U300_GPIO_COH901571_3_BS365, +}; + +/** + * struct u300_gpio_platform - U300 GPIO platform data + * @variant: IP block variant + * @ports: number of GPIO block ports + * @gpio_base: first GPIO number for this block (use a free range) + * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) + */ +struct u300_gpio_platform { + enum u300_gpio_variant variant; + u8 ports; + int gpio_base; + int gpio_irq_base; +}; + +#endif /* __MACH_U300_GPIO_U300_H */ diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h index d5a71abcbaea..e69de29bb2d1 100644 --- a/arch/arm/mach-u300/include/mach/gpio.h +++ b/arch/arm/mach-u300/include/mach/gpio.h @@ -1,294 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/gpio.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * GPIO block resgister definitions and inline macros for - * U300 GPIO COH 901 335 or COH 901 571/3 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_GPIO_H -#define __MACH_U300_GPIO_H - -#include <linux/kernel.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/irq.h> - -/* Switch type depending on platform/chip variant */ -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_COH901335 -#endif -#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) -#define U300_COH901571_3 -#endif - -/* Get base address for regs here */ -#include "u300-regs.h" -/* IRQ numbers */ -#include "irqs.h" - -/* - * This is the GPIO block definitions. GPIO (General Purpose I/O) can be - * used for anything, and often is. The event/enable etc figures are for - * the lowermost pin (pin 0 on each port), shift this left to match your - * pin if you're gonna use these values. - */ -#ifdef U300_COH901335 -#define U300_GPIO_PORTX_SPACING (0x1C) -/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ -#define U300_GPIO_PXPDIR (0x00) -#define U300_GPIO_PXPDOR (0x00) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_GPIO_PXPCR (0x04) -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_GPIO_PXIEV (0x08) -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_GPIO_PXIEN (0x0C) -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_GPIO_PXIFR (0x10) -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_GPIO_PXICR (0x14) -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_GPIO_PXPER (0x18) -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Control Register 32bit (R/W) */ -#define U300_GPIO_CR (0x54) -#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) -/* three ports of 8 bits each = GPIO pins 0..23 */ -#define U300_GPIO_NUM_PORTS 3 -#define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) -#endif - -#ifdef U300_COH901571_3 -/* - * Control Register 32bit (R/W) - * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores - * gives the number of GPIO pins. - * bit 8-2 (mask 0x000001FC) contains the core version ID. - */ -#define U300_GPIO_CR (0x00) -#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL) -#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) -#define U300_GPIO_PORTX_SPACING (0x30) -/* Port X Pin Data INPUT Register 32bit (R/W) */ -#define U300_GPIO_PXPDIR (0x04) -/* Port X Pin Data OUTPUT Register 32bit (R/W) */ -#define U300_GPIO_PXPDOR (0x08) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_GPIO_PXPCR (0x0C) -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_GPIO_PXPER (0x10) -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_GPIO_PXIEV (0x14) -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_GPIO_PXIEN (0x18) -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_GPIO_PXIFR (0x1C) -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_GPIO_PXICR (0x20) -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -#ifdef CONFIG_MACH_U300_BS335 -/* seven ports of 8 bits each = GPIO pins 0..55 */ -#define U300_GPIO_NUM_PORTS 7 -#else -/* five ports of 8 bits each = GPIO pins 0..39 */ -#define U300_GPIO_NUM_PORTS 5 -#endif -#define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) -#endif - -/* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. - * Notice that the actual usage of these pins depends on the - * PAD MUX settings, that is why the same number can potentially - * appear several times. In the reference design each pin is only - * used for one purpose. These were determined by inspecting the - * S365 schematic. - */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_UART_CTS 2 -#define U300_GPIO_PIN_UART_RTS 3 -#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ -#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ -#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ -#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ - -#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ -#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ -#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ -#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ -#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ -#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ -#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ -#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ -#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ -#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ -#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ -#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ -#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ -#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ -#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ -#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ -#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ -#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ -#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ -#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ -#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ - -#ifdef CONFIG_MACH_U300_BS335 - -#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ -#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ -#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ -#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ -#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ -#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ -#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ -#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ -#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ -#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ -#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ -#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ -#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ -#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ -#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif - -/* translates a pin number to a port number */ -#define PIN_TO_PORT(val) (val >> 3) - -/* These can be found in arch/arm/mach-u300/gpio.c */ -extern int gpio_is_valid(int number); -extern int gpio_request(unsigned gpio, const char *label); -extern void gpio_free(unsigned gpio); -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); -extern int gpio_register_callback(unsigned gpio, - int (*func)(void *arg), - void *); -extern int gpio_unregister_callback(unsigned gpio); -extern void enable_irq_on_gpio_pin(unsigned gpio, int edge); -extern void disable_irq_on_gpio_pin(unsigned gpio); -extern void gpio_pullup(unsigned gpio, int value); -extern int gpio_get_value(unsigned gpio); -extern void gpio_set_value(unsigned gpio, int value); - -#define gpio_get_value_cansleep gpio_get_value -#define gpio_set_value_cansleep gpio_set_value - -/* wrappers to sleep-enable the previous two functions */ -static inline unsigned gpio_to_irq(unsigned gpio) -{ - return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0; -} - -static inline unsigned irq_to_gpio(unsigned irq) -{ - /* - * FIXME: This is no 1-1 mapping at all, it points to the - * whole block of 8 pins. - */ - return (irq - IRQ_U300_GPIO_PORT0) << 3; -} - -#endif diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index 09b1b28fa8fd..d270fea32926 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -72,7 +72,7 @@ /* DB3150 and DB3200 have only 45 IRQs */ #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_NR_IRQS 45 +#define U300_VIC_IRQS_END 45 #endif /* The DB3350-specific interrupt lines */ @@ -88,7 +88,7 @@ #define IRQ_U300_GPIO_PORT4 53 #define IRQ_U300_GPIO_PORT5 54 #define IRQ_U300_GPIO_PORT6 55 -#define U300_NR_IRQS 56 +#define U300_VIC_IRQS_END 56 #endif /* The DB3210-specific interrupt lines */ @@ -106,16 +106,25 @@ #define IRQ_U300_NFIF 45 #define IRQ_U300_NFIF2 46 #define IRQ_U300_SYSCON_PLL_LOCK 47 -#define U300_NR_IRQS 48 +#define U300_VIC_IRQS_END 48 #endif -#ifdef CONFIG_AB3550_CORE -#define IRQ_AB3550_BASE (U300_NR_IRQS) -#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37) +/* Maximum 8*7 GPIO lines */ +#ifdef CONFIG_GPIO_U300 +#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END) +#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56) +#else +#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) +#endif -#define NR_IRQS (IRQ_AB3550_END + 1) +/* Optional AB3550 mixsig chip */ +#ifdef CONFIG_AB3550_CORE +#define IRQ_AB3550_BASE (IRQ_U300_GPIO_END) +#define IRQ_AB3550_END (IRQ_AB3550_BASE + 38) #else -#define NR_IRQS U300_NR_IRQS +#define IRQ_AB3550_END (IRQ_U300_GPIO_END) #endif +#define NR_IRQS (IRQ_AB3550_END) + #endif diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 677ccef5cd32..d9a5c92db74a 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -13,12 +13,12 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/mmc/host.h> -#include <linux/gpio.h> #include <linux/dmaengine.h> #include <linux/amba/mmci.h> #include <linux/slab.h> #include <mach/coh901318.h> #include <mach/dma_channels.h> +#include <mach/gpio-u300.h> #include "mmc.h" #include "padmux.h" diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 4108c7bf324e..74bfcff2bdf3 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -6,10 +6,10 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include "pins-db8500.h" diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c index 8ce46c0fdfd5..feb5744d98b7 100644 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -4,7 +4,7 @@ * Board data for the U8500 UIB, also known as the New UIB * License terms: GNU General Public License (GPL), version 2 */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> @@ -13,7 +13,6 @@ #include <linux/mfd/tc3589x.h> #include <linux/input/matrix_keypad.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include "board-mop500.h" diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 4810968b672c..bdd7b80dd7ad 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -37,6 +37,7 @@ #include <plat/i2c.h> #include <plat/ste_dma40.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c index 739fb4c5b160..63c3f8058ffc 100644 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -7,9 +7,9 @@ #include <linux/amba/mmci.h> #include <linux/mmc/host.h> -#include <linux/gpio.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/db5500-regs.h> #include <plat/ste_dma40.h> diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 166d47a5f4f3..e014aa749b03 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -8,7 +8,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/amba/bus.h> -#include <linux/gpio.h> #include <linux/irq.h> #include <linux/i2c.h> @@ -17,6 +16,7 @@ #include <plat/pincfg.h> #include <plat/i2c.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index 22705d246fc7..9de1af008094 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -13,7 +13,7 @@ #include <asm/mach/map.h> #include <asm/pmu.h> -#include <plat/gpio.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 4598b06c8c55..13e8890a8b8a 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -14,12 +14,12 @@ #include <linux/amba/bus.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/io.h> #include <asm/mach/map.h> #include <asm/pmu.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index 13a4ce046ae5..c563e5418d80 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -13,7 +13,7 @@ #include <linux/platform_device.h> #include <linux/amba/bus.h> -#include <plat/gpio.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 700fb05ee815..8d74d927d4e2 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -35,7 +35,7 @@ #define UX500_UART(n) __UX500_UART(n) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =UART_BASE @ no, physical address ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address .endm diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h index 3c4cd31ad9f7..7389df911b1a 100644 --- a/arch/arm/mach-ux500/include/mach/gpio.h +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -7,6 +7,4 @@ */ #define ARCH_NR_GPIOS 350 -#include <plat/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h deleted file mode 100644 index 2ef697a67006..000000000000 --- a/arch/arm/mach-ux500/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) -#define BUS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S index eb2cf7dc5c44..d0fbd7f1cb00 100644 --- a/arch/arm/mach-versatile/include/mach/debug-macro.S +++ b/arch/arm/mach-versatile/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x001F0000 orr \rp, \rp, #0x00001000 orr \rv, \rp, #0xf1000000 @ virtual base diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h index 94ff27678a46..40a8c178f10d 100644 --- a/arch/arm/mach-versatile/include/mach/gpio.h +++ b/arch/arm/mach-versatile/include/mach/gpio.h @@ -1,6 +1 @@ -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +/* empty */ diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h deleted file mode 100644 index dacc9d8e4e6a..000000000000 --- a/arch/arm/mach-versatile/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index 050d65e02a42..fd9e6c7ea49f 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -12,7 +12,7 @@ #define DEBUG_LL_UART_OFFSET 0x00009000 - .macro addruart,rp,rv + .macro addruart,rp,rv,tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rv, \rp, #0xf8000000 @ virtual base orr \rp, \rp, #0x10000000 @ physical base diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h deleted file mode 100644 index 5b7fcd439d87..000000000000 --- a/arch/arm/mach-vexpress/include/mach/memory.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-vexpress/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x60000000) - -#endif diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S index f1191626ad51..ca292f29d4a3 100644 --- a/arch/arm/mach-vt8500/include/mach/debug-macro.S +++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S @@ -11,7 +11,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #0x00200000 orr \rv, \rp, #0xf8000000 orr \rp, \rp, #0xd8000000 diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h index 94ff27678a46..40a8c178f10d 100644 --- a/arch/arm/mach-vt8500/include/mach/gpio.h +++ b/arch/arm/mach-vt8500/include/mach/gpio.h @@ -1,6 +1 @@ -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +/* empty */ diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h deleted file mode 100644 index 175f914eff93..000000000000 --- a/arch/arm/mach-vt8500/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h index 034da3e390c9..5385a4203277 100644 --- a/arch/arm/mach-w90x900/include/mach/gpio.h +++ b/arch/arm/mach-w90x900/include/mach/gpio.h @@ -15,16 +15,12 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep static inline int gpio_to_irq(unsigned gpio) { return gpio; } +#define gpio_to_irq gpio_to_irq static inline int irq_to_gpio(unsigned irq) { diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h deleted file mode 100644 index f02905ba7746..000000000000 --- a/arch/arm/mach-w90x900/include/mach/memory.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/memory.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/memory.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S index 9f664d5eb81d..3ab0be1f6191 100644 --- a/arch/arm/mach-zynq/include/mach/debug-macro.S +++ b/arch/arm/mach-zynq/include/mach/debug-macro.S @@ -17,7 +17,7 @@ #include <mach/zynq_soc.h> #include <mach/uart.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =LL_UART_PADDR @ physical ldr \rv, =LL_UART_VADDR @ virtual .endm diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h deleted file mode 100644 index 35a92634dcc1..000000000000 --- a/arch/arm/mach-zynq/include/mach/memory.h +++ /dev/null @@ -1,22 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/memory.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MEMORY_H__ -#define __MACH_MEMORY_H__ - -#include <asm/sizes.h> - -#define PLAT_PHYS_OFFSET UL(0x0) - -#endif diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index e4dde91f0231..a3045937fc2f 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -54,7 +54,7 @@ #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical ldr \rv, =UART_VADDR @ virtual .endm diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index 44af0064ba1a..40a8c178f10d 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -1,32 +1 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_GPIO_H__ -#define __ASM_ARCH_MXC_GPIO_H__ - -#include <linux/spinlock.h> -#include <mach/hardware.h> -#include <asm-generic/gpio.h> - -/* use gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif +/* empty */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 35e0df224caa..2fa3b5430102 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -90,11 +90,11 @@ typedef u64 iomux_v3_cfg_t; #define PAD_CTL_HYS (1 << 8) #define PAD_CTL_PKE (1 << 7) -#define PAD_CTL_PUE (1 << 6) -#define PAD_CTL_PUS_100K_DOWN (0 << 4) -#define PAD_CTL_PUS_47K_UP (1 << 4) -#define PAD_CTL_PUS_100K_UP (2 << 4) -#define PAD_CTL_PUS_22K_UP (3 << 4) +#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) +#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) #define PAD_CTL_ODE (1 << 3) diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h deleted file mode 100644 index 3ec84b902243..000000000000 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MEMORY_H__ -#define __ASM_ARCH_MXC_MEMORY_H__ - -#define MX1_PHYS_OFFSET UL(0x08000000) -#define MX21_PHYS_OFFSET UL(0xc0000000) -#define MX25_PHYS_OFFSET UL(0x80000000) -#define MX27_PHYS_OFFSET UL(0xa0000000) -#define MX3x_PHYS_OFFSET UL(0x80000000) -#define MX50_PHYS_OFFSET UL(0x70000000) -#define MX51_PHYS_OFFSET UL(0x90000000) -#define MX53_PHYS_OFFSET UL(0x70000000) - -#if !defined(CONFIG_RUNTIME_PHYS_OFFSET) -# if defined CONFIG_ARCH_MX1 -# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET -# elif defined CONFIG_MACH_MX21 -# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX25 -# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET -# elif defined CONFIG_MACH_MX27 -# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX3 -# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX50 -# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX51 -# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX53 -# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET -# endif -#endif - -#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h index d5d7e651269c..3ba4d8f8073b 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h @@ -9,20 +9,9 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_GPIO_H -#define __ASM_PLAT_GPIO_H -#include <asm-generic/gpio.h> - -/* - * These currently cause a function call to happen, they may be optimized - * if needed by adding cpu-specific defines to identify blocks - * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +#ifndef __PLAT_NOMADIK_GPIO +#define __PLAT_NOMADIK_GPIO /* * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving @@ -93,4 +82,4 @@ struct nmk_gpio_platform_data { bool supports_sleepmode; }; -#endif /* __ASM_PLAT_GPIO_H */ +#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index bb8f4a6b3e37..95732af7b208 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -14,6 +14,7 @@ config ARCH_OMAP1 select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select NEED_MACH_MEMORY_H help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 923c9621096b..caa1f7b6cc21 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -18,7 +18,6 @@ #include <mach/hardware.h> #include <plat/board.h> -#include <mach/gpio.h> /* Many OMAP development platforms reuse the same "debug board"; these diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index fc05b1022602..61a1ec2a6af4 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> @@ -19,7 +19,6 @@ #include <asm/mach-types.h> #include <plat/fpga.h> -#include <mach/gpio.h> /* Many OMAP development platforms reuse the same "debug board"; these diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index bd9a06b3ee89..acd132c29647 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -8,7 +8,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +24,6 @@ #include <plat/tc.h> #include <plat/board.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include <plat/menelaus.h> #include <plat/omap44xx.h> diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 91e8de3db085..9e86ee0aed0a 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -222,26 +222,6 @@ extern void omap_gpio_restore_context(void); #include <linux/errno.h> #include <asm-generic/gpio.h> -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned irq) { int tmp; diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h deleted file mode 100644 index 7f9df6f1e113..000000000000 --- a/arch/arm/plat-omap/include/plat/memory.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/memory.h - * - * Memory map for OMAP-1510 and 1610 - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#if defined(CONFIG_ARCH_OMAP1) -#define PLAT_PHYS_OFFSET UL(0x10000000) -#else -#define PLAT_PHYS_OFFSET UL(0x80000000) -#endif - -/* - * Bus address is physical address, except for OMAP-1510 Local Bus. - * OMAP-1510 bus address is translated into a Local Bus address if the - * OMAP bus type is lbus. We do the address translation based on the - * device overriding the defaults used in the dma-mapping API. - * Note that the is_lbus_device() test is not very efficient on 1510 - * because of the strncmp(). - */ -#ifdef CONFIG_ARCH_OMAP15XX - -/* - * OMAP-1510 Local Bus address offset - */ -#define OMAP1510_LB_OFFSET UL(0x30000000) - -#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) -#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) -#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) - -#define __arch_pfn_to_dma(dev, pfn) \ - ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ - if (is_lbus_device(dev)) \ - __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ - __dma; }) - -#define __arch_dma_to_pfn(dev, addr) \ - ({ dma_addr_t __dma = addr; \ - if (is_lbus_device(dev)) \ - __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \ - __phys_to_pfn(__dma); \ - }) - -#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ - lbus_to_virt(addr) : \ - __phys_to_virt(addr)); }) - -#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ - (dma_addr_t) (is_lbus_device(dev) ? \ - virt_to_lbus(__addr) : \ - __virt_to_phys(__addr)); }) - -#endif /* CONFIG_ARCH_OMAP15XX */ - -#endif - diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index de3b10c18127..1ab9fd6abe6d 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -16,8 +16,8 @@ #include <linux/init.h> /* - * Memory entry used for the DEBUG_LL UART configuration. See also - * uncompress.h and debug-macro.S. + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. * * Note that using a memory location for storing the UART configuration * has at least two limitations: @@ -27,7 +27,7 @@ * 2. We assume printascii is called at least once before paging_init, * and addruart has a chance to read OMAP_UART_INFO */ -#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc) +#define OMAP_UART_INFO_OFS 0x3ffc /* OMAP1 serial ports */ #define OMAP1_UART1_BASE 0xfffb0000 diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index a067484cc4a2..2f472e989ec6 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -36,7 +36,13 @@ int uart_shift; */ static void set_omap_uart_info(unsigned char port) { - *(volatile u32 *)OMAP_UART_INFO = port; + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; } static void putc(int c) diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 3075b9fdde83..3abf30428bee 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -12,15 +12,7 @@ #define __PLAT_GPIO_H #include <linux/init.h> -#include <asm-generic/gpio.h> - -/* - * GENERIC_GPIO primitives. - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +#include <linux/types.h> /* * Orion-specific GPIO API extensions. diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 3aca5ba0f876..f302d048392d 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -4,7 +4,6 @@ obj-y := dma.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_PXA95x) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h new file mode 100644 index 000000000000..b6390beff323 --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/gpio-pxa.h @@ -0,0 +1,44 @@ +#ifndef __PLAT_PXA_GPIO_H +#define __PLAT_PXA_GPIO_H + +struct irq_data; + +/* + * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with + * one set of registers. The register offsets are organized below: + * + * GPLR GPDR GPSR GPCR GRER GFER GEDR + * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 + * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C + * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 + * + * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 + * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C + * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 + * + * NOTE: + * BANK 3 is only available on PXA27x and later processors. + * BANK 4 and 5 are only available on PXA935 + */ + +#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) + +#define GPLR_OFFSET 0x00 +#define GPDR_OFFSET 0x0C +#define GPSR_OFFSET 0x18 +#define GPCR_OFFSET 0x24 +#define GRER_OFFSET 0x30 +#define GFER_OFFSET 0x3C +#define GEDR_OFFSET 0x48 + +/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). + * Those cases currently cause holes in the GPIO number space, the + * actual number of the last GPIO is recorded by 'pxa_last_gpio'. + */ +extern int pxa_last_gpio; + +typedef int (*set_wake_t)(struct irq_data *d, unsigned int on); + +extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); + +#endif /* __PLAT_PXA_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h index 1ddd2b97a729..258f77210b02 100644 --- a/arch/arm/plat-pxa/include/plat/gpio.h +++ b/arch/arm/plat-pxa/include/plat/gpio.h @@ -1,35 +1,10 @@ #ifndef __PLAT_GPIO_H #define __PLAT_GPIO_H -struct irq_data; +#define __ARM_GPIOLIB_COMPLEX -/* - * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with - * one set of registers. The register offsets are organized below: - * - * GPLR GPDR GPSR GPCR GRER GFER GEDR - * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 - * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C - * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 - * - * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 - * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C - * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 - * - * NOTE: - * BANK 3 is only available on PXA27x and later processors. - * BANK 4 and 5 are only available on PXA935 - */ - -#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 +/* The individual machine provides register offsets and NR_BUILTIN_GPIO */ +#include <mach/gpio-pxa.h> static inline int gpio_get_value(unsigned gpio) { @@ -52,13 +27,4 @@ static inline void gpio_set_value(unsigned gpio, int value) #define gpio_cansleep __gpio_cansleep -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space, the - * actual number of the last GPIO is recorded by 'pxa_last_gpio'. - */ -extern int pxa_last_gpio; - -typedef int (*set_wake_t)(struct irq_data *d, unsigned int on); - -extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); #endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 89e68e07b0a8..5c79c29f2833 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -456,7 +456,7 @@ struct mfp_addr_map { #define MFP_ADDR_END { MFP_PIN_INVALID, 0 } -void __init mfp_init_base(unsigned long mfpr_base); +void __init mfp_init_base(void __iomem *mfpr_base); void __init mfp_init_addr(struct mfp_addr_map *map); /* diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index be12eadcce20..2c4dbb1f4236 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -229,7 +229,7 @@ void mfp_write(int mfp, unsigned long val) spin_unlock_irqrestore(&mfp_spin_lock, flags); } -void __init mfp_init_base(unsigned long mfpr_base) +void __init mfp_init_base(void __iomem *mfpr_base) { int i; @@ -237,7 +237,7 @@ void __init mfp_init_base(unsigned long mfpr_base) for (i = 0; i < ARRAY_SIZE(mfp_table); i++) mfp_table[i].config = -1; - mfpr_mmio_base = (void __iomem *)mfpr_base; + mfpr_mmio_base = mfpr_base; } void __init mfp_init_addr(struct mfp_addr_map *map) diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 8501bbf2c092..02b160a1ec9b 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -14,7 +14,7 @@ #include <linux/amba/serial.h> #include <mach/hardware.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp mov \rp, #SPEAR_DBG_UART_BASE @ Physical base mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base .endm diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h index b857c91257dd..40a8c178f10d 100644 --- a/arch/arm/plat-spear/include/plat/gpio.h +++ b/arch/arm/plat-spear/include/plat/gpio.h @@ -1,24 +1 @@ -/* - * arch/arm/plat-spear/include/plat/gpio.h - * - * GPIO macros for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_GPIO_H -#define __PLAT_GPIO_H - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif /* __PLAT_GPIO_H */ +/* empty */ diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h deleted file mode 100644 index 7e3599e1104e..000000000000 --- a/arch/arm/plat-spear/include/plat/memory.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/memory.h - * - * Memory map for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_MEMORY_H -#define __PLAT_MEMORY_H - -/* Physical DRAM offset */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif /* __PLAT_MEMORY_H */ diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S index 7662f736e42b..cf17d04ec30d 100644 --- a/arch/arm/plat-tcc/include/mach/debug-macro.S +++ b/arch/arm/plat-tcc/include/mach/debug-macro.S @@ -9,7 +9,7 @@ * */ - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp moveq \rp, #0x90000000 @ physical base address movne \rv, #0xF1000000 @ virtual base orr \rp, \rp, #0x00007000 @ UART0 diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h deleted file mode 100644 index 28a6e0cd13b3..000000000000 --- a/arch/arm/plat-tcc/include/mach/memory.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 RidgeRun, Inc. - * Copyright (C) 2008-2009 Telechips - * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GPL v2. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x20000000) - -#endif diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 960c72571395..3f4c2613b3df 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -30,7 +30,7 @@ #include <mach/at91sam9_smc.h> #include <mach/board.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #define DRV_NAME "pata_at91" #define DRV_VERSION "0.3" diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d539efd96d4b..4caa3d37bbde 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -178,6 +178,15 @@ config GPIO_SCH The Intel Tunnel Creek processor has 5 GPIOs powered by the core power rail and 9 from suspend power supply. +config GPIO_U300 + bool "ST-Ericsson U300 COH 901 335/571 GPIO" + depends on GPIOLIB && ARCH_U300 + help + Say yes here to support GPIO interface on ST-Ericsson U300. + The names of the two IP block variants supported are + COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 + ports of 8 GPIO pins each. + config GPIO_VX855 tristate "VIA VX855/VX875 GPIO" depends on MFD_SUPPORT && PCI diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9588948c96f0..19c5d27b6d2e 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -14,11 +14,14 @@ obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o +obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o +obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o +obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o @@ -37,18 +40,20 @@ obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o obj-$(CONFIG_GPIO_PCH) += gpio-pch.o obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o +obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o - +obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o +obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o diff --git a/arch/arm/mach-davinci/gpio.c b/drivers/gpio/gpio-davinci.c index cafbe13a82a5..df0d59570a84 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/drivers/gpio/gpio-davinci.c @@ -9,15 +9,13 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <mach/gpio.h> - #include <asm/mach/irq.h> struct davinci_gpio_regs { @@ -232,9 +230,6 @@ static void gpio_irq_enable(struct irq_data *d) static int gpio_irq_type(struct irq_data *d, unsigned trigger) { - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); - if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) return -EINVAL; diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c index 72fb9c665320..7aafbb437339 100644 --- a/drivers/gpio/gpio-ep93xx.c +++ b/drivers/gpio/gpio-ep93xx.c @@ -23,6 +23,9 @@ #include <linux/basic_mmio_gpio.h> #include <mach/hardware.h> +#include <mach/gpio-ep93xx.h> + +#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) struct ep93xx_gpio { void __iomem *mmio_base; @@ -307,6 +310,21 @@ static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, return 0; } +/* + * Map GPIO A0..A7 (0..7) to irq 64..71, + * B0..B7 (7..15) to irq 72..79, and + * F0..F7 (16..24) to irq 80..87. + */ +static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + if (gpio > EP93XX_GPIO_LINE_MAX_IRQ) + return -EINVAL; + + return 64 + gpio; +} + static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev, void __iomem *mmio_base, struct ep93xx_gpio_bank *bank) { @@ -321,8 +339,10 @@ static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev, bgc->gc.label = bank->label; bgc->gc.base = bank->base; - if (bank->has_debounce) + if (bank->has_debounce) { bgc->gc.set_debounce = ep93xx_gpio_set_debounce; + bgc->gc.to_irq = ep93xx_gpio_to_irq; + } return gpiochip_add(&bgc->gc); } diff --git a/arch/arm/mach-ks8695/gpio.c b/drivers/gpio/gpio-ks8695.c index 31e456508a6f..a3ac66ea364b 100644 --- a/arch/arm/mach-ks8695/gpio.c +++ b/drivers/gpio/gpio-ks8695.c @@ -18,7 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/init.h> @@ -31,7 +31,7 @@ #include <asm/mach/irq.h> #include <mach/regs-gpio.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> /* * Configure a GPIO line for either GPIO function, or its internal diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/drivers/gpio/gpio-lpc32xx.c index 69061ea8997a..5b6948081f8f 100644 --- a/arch/arm/mach-lpc32xx/gpiolib.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -24,7 +24,7 @@ #include <mach/hardware.h> #include <mach/platform.h> -#include "common.h" +#include <mach/gpio-lpc32xx.h> #define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000) #define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004) diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c index 2c212c732d76..740caed2b278 100644 --- a/drivers/gpio/gpio-nomadik.c +++ b/drivers/gpio/gpio-nomadik.c @@ -27,8 +27,9 @@ #include <asm/mach/irq.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> -#include <mach/gpio.h> +#include <asm/gpio.h> /* * The GPIO module in the Nomadik family of Systems-on-Chip is an diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 0599854e2217..9c27244fd680 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -25,7 +25,7 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <asm/mach/irq.h> struct gpio_bank { diff --git a/arch/arm/plat-pxa/gpio.c b/drivers/gpio/gpio-pxa.c index a11dc3670505..ee137712f9db 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/drivers/gpio/gpio-pxa.c @@ -11,14 +11,14 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/syscore_ops.h> #include <linux/slab.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> int pxa_last_gpio; @@ -122,7 +122,7 @@ static int __init pxa_init_gpio_chip(int gpio_end) struct gpio_chip *c = &chips[i].chip; sprintf(chips[i].label, "gpio-%d", i); - chips[i].regbase = (void __iomem *)GPIO_BANK(i); + chips[i].regbase = GPIO_BANK(i); c->base = gpio; c->label = chips[i].label; diff --git a/arch/arm/mach-sa1100/gpio.c b/drivers/gpio/gpio-sa1100.c index 0d3829a8c2c1..b6c1f6d80649 100644 --- a/arch/arm/mach-sa1100/gpio.c +++ b/drivers/gpio/gpio-sa1100.c @@ -7,13 +7,11 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/module.h> -#include <asm/gpio.h> #include <mach/hardware.h> -#include "generic.h" static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) { diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 747eb40e8afe..6b65207c8106 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -27,6 +27,7 @@ #include <asm/mach/irq.h> +#include <mach/gpio-tegra.h> #include <mach/iomap.h> #include <mach/suspend.h> @@ -134,7 +135,10 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset, return 0; } - +static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return TEGRA_GPIO_TO_IRQ(offset); +} static struct gpio_chip tegra_gpio_chip = { .label = "tegra-gpio", @@ -142,6 +146,7 @@ static struct gpio_chip tegra_gpio_chip = { .get = tegra_gpio_get, .direction_output = tegra_gpio_direction_output, .set = tegra_gpio_set, + .to_irq = tegra_gpio_to_irq, .base = 0, .ngpio = TEGRA_NR_GPIOS, }; @@ -331,6 +336,7 @@ static struct lock_class_key gpio_lock_class; static int __init tegra_gpio_init(void) { struct tegra_gpio_bank *bank; + int gpio; int i; int j; @@ -352,14 +358,17 @@ static int __init tegra_gpio_init(void) gpiochip_add(&tegra_gpio_chip); - for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { - bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))]; + for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) { + int irq = TEGRA_GPIO_TO_IRQ(gpio); + /* No validity check; all Tegra GPIOs are valid IRQs */ + + bank = &tegra_gpio_banks[GPIO_BANK(gpio)]; - irq_set_lockdep_class(i, &gpio_lock_class); - irq_set_chip_data(i, bank); - irq_set_chip_and_handler(i, &tegra_gpio_irq_chip, + irq_set_lockdep_class(irq, &gpio_lock_class); + irq_set_chip_data(irq, bank); + irq_set_chip_and_handler(irq, &tegra_gpio_irq_chip, handle_simple_irq); - set_irq_flags(i, IRQF_VALID); + set_irq_flags(irq, IRQF_VALID); } for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c index 3fa3e2867e19..3fa3e2867e19 100644 --- a/arch/arm/mach-davinci/gpio-tnetv107x.c +++ b/drivers/gpio/gpio-tnetv107x.c diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c index 53e8255cb0ba..4035778852b0 100644 --- a/drivers/gpio/gpio-u300.c +++ b/drivers/gpio/gpio-u300.c @@ -1,18 +1,17 @@ /* * U300 GPIO module. * - * Copyright (C) 2007-2009 ST-Ericsson AB + * Copyright (C) 2007-2011 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * This can driver either of the two basic GPIO cores * available in the U300 platforms: * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) - * Notice that you also have inline macros in <asm-arch/gpio.h> - * Author: Linus Walleij <linus.walleij@stericsson.com> + * Author: Linus Walleij <linus.walleij@linaro.org> * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - * */ #include <linux/module.h> +#include <linux/irq.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/errno.h> @@ -21,677 +20,898 @@ #include <linux/err.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/list.h> +#include <linux/slab.h> +#include <mach/gpio-u300.h> -/* Reference to GPIO block clock */ -static struct clk *clk; +/* + * Bias modes for U300 GPIOs + * + * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us + * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or state + * is not controlled by software + * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with high + * impedance to VDD) + */ +#define GPIO_U300_CONFIG_BIAS_UNKNOWN 0x1000 +#define GPIO_U300_CONFIG_BIAS_FLOAT 0x1001 +#define GPIO_U300_CONFIG_BIAS_PULL_UP 0x1002 -/* Memory resource */ -static struct resource *memres; -static void __iomem *virtbase; -static struct device *gpiodev; +/* + * Drive modes for U300 GPIOs (output) + * + * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high and + * low, this is the most typical case and is typically achieved with two + * active transistors on the output + * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain + * (open collector) which means it is usually wired with other output + * ports which are then pulled up with an external resistor + * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain + * (open emitter) which is the same as open drain mutatis mutandis but + * pulled to ground + */ +#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL 0x2000 +#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN 0x2001 +#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE 0x2002 + +/* + * Register definitions for COH 901 335 variant + */ +#define U300_335_PORT_STRIDE (0x1C) +/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ +#define U300_335_PXPDIR (0x00) +#define U300_335_PXPDOR (0x00) +/* Port X Pin Config Register 32bit (R/W) */ +#define U300_335_PXPCR (0x04) +/* This register layout is the same in both blocks */ +#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) +#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) +#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) +/* Port X Interrupt Event Register 32bit (R/W) */ +#define U300_335_PXIEV (0x08) +/* Port X Interrupt Enable Register 32bit (R/W) */ +#define U300_335_PXIEN (0x0C) +/* Port X Interrupt Force Register 32bit (R/W) */ +#define U300_335_PXIFR (0x10) +/* Port X Interrupt Config Register 32bit (R/W) */ +#define U300_335_PXICR (0x14) +/* This register layout is the same in both blocks */ +#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) +#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) +/* Port X Pull-up Enable Register 32bit (R/W) */ +#define U300_335_PXPER (0x18) +/* This register layout is the same in both blocks */ +#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) +/* Control Register 32bit (R/W) */ +#define U300_335_CR (0x54) +#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) + +/* + * Register definitions for COH 901 571 / 3 variant + */ +#define U300_571_PORT_STRIDE (0x30) +/* + * Control Register 32bit (R/W) + * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores + * gives the number of GPIO pins. + * bit 8-2 (mask 0x000001FC) contains the core version ID. + */ +#define U300_571_CR (0x00) +#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL) +#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) +/* + * These registers have the same layout and function as the corresponding + * COH 901 335 registers, just at different offset. + */ +#define U300_571_PXPDIR (0x04) +#define U300_571_PXPDOR (0x08) +#define U300_571_PXPCR (0x0C) +#define U300_571_PXPER (0x10) +#define U300_571_PXIEV (0x14) +#define U300_571_PXIEN (0x18) +#define U300_571_PXIFR (0x1C) +#define U300_571_PXICR (0x20) + +/* 8 bits per port, no version has more than 7 ports */ +#define U300_GPIO_PINS_PER_PORT 8 +#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7) + +struct u300_gpio { + struct gpio_chip chip; + struct list_head port_list; + struct clk *clk; + struct resource *memres; + void __iomem *base; + struct device *dev; + int irq_base; + u32 stride; + /* Register offsets */ + u32 pcr; + u32 dor; + u32 dir; + u32 per; + u32 icr; + u32 ien; + u32 iev; +}; struct u300_gpio_port { - const char *name; + struct list_head node; + struct u300_gpio *gpio; + char name[8]; int irq; int number; + u8 toggle_edge_mode; }; +/* + * Macro to expand to read a specific register found in the "gpio" + * struct. It requires the struct u300_gpio *gpio variable to exist in + * its context. It calculates the port offset from the given pin + * offset, muliplies by the port stride and adds the register offset + * so it provides a pointer to the desired register. + */ +#define U300_PIN_REG(pin, reg) \ + (gpio->base + (pin >> 3) * gpio->stride + gpio->reg) -static struct u300_gpio_port gpio_ports[] = { - { - .name = "gpio0", - .number = 0, - }, - { - .name = "gpio1", - .number = 1, - }, - { - .name = "gpio2", - .number = 2, - }, -#ifdef U300_COH901571_3 - { - .name = "gpio3", - .number = 3, - }, - { - .name = "gpio4", - .number = 4, - }, -#ifdef CONFIG_MACH_U300_BS335 - { - .name = "gpio5", - .number = 5, - }, - { - .name = "gpio6", - .number = 6, - }, -#endif -#endif +/* + * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO + * register. + */ +#define U300_PIN_BIT(pin) \ + (1 << (pin & 0x07)) +struct u300_gpio_confdata { + u16 bias_mode; + bool output; + int outval; }; +/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */ +#define BS335_GPIO_NUM_PORTS 7 +/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */ +#define BS365_GPIO_NUM_PORTS 5 -#ifdef U300_COH901571_3 +#define U300_FLOATING_INPUT { \ + .bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \ + .output = false, \ +} -/* Default input value */ -#define DEFAULT_OUTPUT_LOW 0 -#define DEFAULT_OUTPUT_HIGH 1 +#define U300_PULL_UP_INPUT { \ + .bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \ + .output = false, \ +} -/* GPIO Pull-Up status */ -#define DISABLE_PULL_UP 0 -#define ENABLE_PULL_UP 1 +#define U300_OUTPUT_LOW { \ + .output = true, \ + .outval = 0, \ +} -#define GPIO_NOT_USED 0 -#define GPIO_IN 1 -#define GPIO_OUT 2 +#define U300_OUTPUT_HIGH { \ + .output = true, \ + .outval = 1, \ +} -struct u300_gpio_configuration_data { - unsigned char pin_usage; - unsigned char default_output_value; - unsigned char pull_up; -}; /* Initial configuration */ -const struct u300_gpio_configuration_data -u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { -#ifdef CONFIG_MACH_U300_BS335 +static const struct __initdata u300_gpio_confdata +bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { /* Port 0, pins 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + U300_FLOATING_INPUT, + U300_OUTPUT_HIGH, + U300_FLOATING_INPUT, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, }, /* Port 1, pins 0-7 */ { - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_PULL_UP_INPUT, + U300_FLOATING_INPUT, + U300_OUTPUT_HIGH, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, }, /* Port 2, pins 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_OUTPUT_LOW, + U300_PULL_UP_INPUT, + U300_OUTPUT_LOW, + U300_PULL_UP_INPUT, }, /* Port 3, pins 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + U300_PULL_UP_INPUT, + U300_OUTPUT_LOW, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, }, /* Port 4, pins 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, }, /* Port 5, pins 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, }, /* Port 6, pind 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, } -#endif +}; -#ifdef CONFIG_MACH_U300_BS365 +static const struct __initdata u300_gpio_confdata +bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { /* Port 0, pins 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + U300_FLOATING_INPUT, + U300_OUTPUT_LOW, + U300_FLOATING_INPUT, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_PULL_UP_INPUT, + U300_FLOATING_INPUT, }, /* Port 1, pins 0-7 */ { - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + U300_OUTPUT_LOW, + U300_FLOATING_INPUT, + U300_OUTPUT_LOW, + U300_FLOATING_INPUT, + U300_FLOATING_INPUT, + U300_OUTPUT_HIGH, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, }, /* Port 2, pins 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + U300_FLOATING_INPUT, + U300_PULL_UP_INPUT, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, }, /* Port 3, pins 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, }, /* Port 4, pins 0-7 */ { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, + U300_PULL_UP_INPUT, /* These 4 pins doesn't exist on DB3210 */ - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, + U300_OUTPUT_LOW, } -#endif }; -#endif - -/* No users == we can power down GPIO */ -static int gpio_users; - -struct gpio_struct { - int (*callback)(void *); - void *data; - int users; -}; - -static struct gpio_struct gpio_pin[U300_GPIO_MAX]; - -/* - * Let drivers register callback in order to get notified when there is - * an interrupt on the gpio pin +/** + * to_u300_gpio() - get the pointer to u300_gpio + * @chip: the gpio chip member of the structure u300_gpio */ -int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data) +static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip) { - if (gpio_pin[gpio].callback) - dev_warn(gpiodev, "%s: WARNING: callback already " - "registered for gpio pin#%d\n", __func__, gpio); - gpio_pin[gpio].callback = func; - gpio_pin[gpio].data = data; - - return 0; + return container_of(chip, struct u300_gpio, chip); } -EXPORT_SYMBOL(gpio_register_callback); -int gpio_unregister_callback(unsigned gpio) +static int u300_gpio_get(struct gpio_chip *chip, unsigned offset) { - if (!gpio_pin[gpio].callback) - dev_warn(gpiodev, "%s: WARNING: callback already " - "unregistered for gpio pin#%d\n", __func__, gpio); - gpio_pin[gpio].callback = NULL; - gpio_pin[gpio].data = NULL; + struct u300_gpio *gpio = to_u300_gpio(chip); - return 0; + return readl(U300_PIN_REG(offset, dir)) & U300_PIN_BIT(offset); } -EXPORT_SYMBOL(gpio_unregister_callback); -/* Non-zero means valid */ -int gpio_is_valid(int number) +static void u300_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - if (number >= 0 && - number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT)) - return 1; - return 0; -} -EXPORT_SYMBOL(gpio_is_valid); + struct u300_gpio *gpio = to_u300_gpio(chip); + unsigned long flags; + u32 val; -int gpio_request(unsigned gpio, const char *label) -{ - if (gpio_pin[gpio].users) - return -EINVAL; - else - gpio_pin[gpio].users++; + local_irq_save(flags); - gpio_users++; + val = readl(U300_PIN_REG(offset, dor)); + if (value) + writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, dor)); + else + writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, dor)); - return 0; + local_irq_restore(flags); } -EXPORT_SYMBOL(gpio_request); -void gpio_free(unsigned gpio) +static int u300_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - gpio_users--; - gpio_pin[gpio].users--; - if (unlikely(gpio_pin[gpio].users < 0)) { - dev_warn(gpiodev, "warning: gpio#%d release mismatch\n", - gpio); - gpio_pin[gpio].users = 0; - } - - return; -} -EXPORT_SYMBOL(gpio_free); + struct u300_gpio *gpio = to_u300_gpio(chip); + unsigned long flags; + u32 val; -/* This returns zero or nonzero */ -int gpio_get_value(unsigned gpio) -{ - return readl(virtbase + U300_GPIO_PXPDIR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07)); + local_irq_save(flags); + val = readl(U300_PIN_REG(offset, pcr)); + /* Mask out this pin, note 2 bits per setting */ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((offset & 0x07) << 1)); + writel(val, U300_PIN_REG(offset, pcr)); + local_irq_restore(flags); + return 0; } -EXPORT_SYMBOL(gpio_get_value); -/* - * We hope that the compiler will optimize away the unused branch - * in case "value" is a constant - */ -void gpio_set_value(unsigned gpio, int value) +static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) { - u32 val; + struct u300_gpio *gpio = to_u300_gpio(chip); unsigned long flags; + u32 oldmode; + u32 val; local_irq_save(flags); - if (value) { - /* set */ - val = readl(virtbase + U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) - & (1 << (gpio & 0x07)); - writel(val | (1 << (gpio & 0x07)), virtbase + - U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } else { - /* clear */ - val = readl(virtbase + U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) - & (1 << (gpio & 0x07)); - writel(val & ~(1 << (gpio & 0x07)), virtbase + - U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + val = readl(U300_PIN_REG(offset, pcr)); + /* + * Drive mode must be set by the special mode set function, set + * push/pull mode by default if no mode has been selected. + */ + oldmode = val & (U300_GPIO_PXPCR_PIN_MODE_MASK << + ((offset & 0x07) << 1)); + /* mode = 0 means input, else some mode is already set */ + if (oldmode == 0) { + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << + ((offset & 0x07) << 1)); + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL + << ((offset & 0x07) << 1)); + writel(val, U300_PIN_REG(offset, pcr)); } + u300_gpio_set(chip, offset, value); local_irq_restore(flags); + return 0; } -EXPORT_SYMBOL(gpio_set_value); -int gpio_direction_input(unsigned gpio) +static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { + struct u300_gpio *gpio = to_u300_gpio(chip); + int retirq = gpio->irq_base + offset; + + dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset, + retirq); + return retirq; +} + +static int u300_gpio_config(struct gpio_chip *chip, unsigned offset, + u16 param, unsigned long *data) +{ + struct u300_gpio *gpio = to_u300_gpio(chip); unsigned long flags; u32 val; - if (gpio > U300_GPIO_MAX) - return -EINVAL; - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - /* Mask out this pin*/ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); - /* This is not needed since it sets the bits to zero.*/ - /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */ - writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); + switch (param) { + case GPIO_U300_CONFIG_BIAS_UNKNOWN: + case GPIO_U300_CONFIG_BIAS_FLOAT: + val = readl(U300_PIN_REG(offset, per)); + writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, per)); + break; + case GPIO_U300_CONFIG_BIAS_PULL_UP: + val = readl(U300_PIN_REG(offset, per)); + writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, per)); + break; + case GPIO_U300_CONFIG_DRIVE_PUSH_PULL: + val = readl(U300_PIN_REG(offset, pcr)); + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK + << ((offset & 0x07) << 1)); + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL + << ((offset & 0x07) << 1)); + writel(val, U300_PIN_REG(offset, pcr)); + break; + case GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: + val = readl(U300_PIN_REG(offset, pcr)); + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK + << ((offset & 0x07) << 1)); + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN + << ((offset & 0x07) << 1)); + writel(val, U300_PIN_REG(offset, pcr)); + break; + case GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: + val = readl(U300_PIN_REG(offset, pcr)); + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK + << ((offset & 0x07) << 1)); + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE + << ((offset & 0x07) << 1)); + writel(val, U300_PIN_REG(offset, pcr)); + break; + default: + local_irq_restore(flags); + dev_err(gpio->dev, "illegal configuration requested\n"); + return -EINVAL; + } local_irq_restore(flags); return 0; } -EXPORT_SYMBOL(gpio_direction_input); -int gpio_direction_output(unsigned gpio, int value) +static struct gpio_chip u300_gpio_chip = { + .label = "u300-gpio-chip", + .owner = THIS_MODULE, + .get = u300_gpio_get, + .set = u300_gpio_set, + .direction_input = u300_gpio_direction_input, + .direction_output = u300_gpio_direction_output, + .to_irq = u300_gpio_to_irq, +}; + +static void u300_toggle_trigger(struct u300_gpio *gpio, unsigned offset) { - unsigned long flags; u32 val; - if (gpio > U300_GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - /* Mask out this pin */ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); - /* - * FIXME: configure for push/pull, open drain or open source per pin - * in setup. The current driver will only support push/pull. - */ - val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL - << ((gpio & 0x07) << 1)); - writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - gpio_set_value(gpio, value); - local_irq_restore(flags); - return 0; + val = readl(U300_PIN_REG(offset, icr)); + /* Set mode depending on state */ + if (u300_gpio_get(&gpio->chip, offset)) { + /* High now, let's trigger on falling edge next then */ + writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr)); + dev_dbg(gpio->dev, "next IRQ on falling edge on pin %d\n", + offset); + } else { + /* Low now, let's trigger on rising edge next then */ + writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr)); + dev_dbg(gpio->dev, "next IRQ on rising edge on pin %d\n", + offset); + } } -EXPORT_SYMBOL(gpio_direction_output); -/* - * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0). - */ -void enable_irq_on_gpio_pin(unsigned gpio, int edge) +static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger) { + struct u300_gpio_port *port = irq_data_get_irq_chip_data(d); + struct u300_gpio *gpio = port->gpio; + int offset = d->irq - gpio->irq_base; u32 val; - unsigned long flags; - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val |= (1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - if (edge) - val |= (1 << (gpio & 0x07)); - else - val &= ~(1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); + if ((trigger & IRQF_TRIGGER_RISING) && + (trigger & IRQF_TRIGGER_FALLING)) { + /* + * The GPIO block can only trigger on falling OR rising edges, + * not both. So we need to toggle the mode whenever the pin + * goes from one state to the other with a special state flag + */ + dev_dbg(gpio->dev, + "trigger on both rising and falling edge on pin %d\n", + offset); + port->toggle_edge_mode |= U300_PIN_BIT(offset); + u300_toggle_trigger(gpio, offset); + } else if (trigger & IRQF_TRIGGER_RISING) { + dev_dbg(gpio->dev, "trigger on rising edge on pin %d\n", + offset); + val = readl(U300_PIN_REG(offset, icr)); + writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr)); + port->toggle_edge_mode &= ~U300_PIN_BIT(offset); + } else if (trigger & IRQF_TRIGGER_FALLING) { + dev_dbg(gpio->dev, "trigger on falling edge on pin %d\n", + offset); + val = readl(U300_PIN_REG(offset, icr)); + writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr)); + port->toggle_edge_mode &= ~U300_PIN_BIT(offset); + } + + return 0; } -EXPORT_SYMBOL(enable_irq_on_gpio_pin); -void disable_irq_on_gpio_pin(unsigned gpio) +static void u300_gpio_irq_enable(struct irq_data *d) { + struct u300_gpio_port *port = irq_data_get_irq_chip_data(d); + struct u300_gpio *gpio = port->gpio; + int offset = d->irq - gpio->irq_base; u32 val; unsigned long flags; local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val &= ~(1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); + val = readl(U300_PIN_REG(offset, ien)); + writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien)); local_irq_restore(flags); } -EXPORT_SYMBOL(disable_irq_on_gpio_pin); -/* Enable (value == 0) or disable (value == 1) internal pullup */ -void gpio_pullup(unsigned gpio, int value) +static void u300_gpio_irq_disable(struct irq_data *d) { + struct u300_gpio_port *port = irq_data_get_irq_chip_data(d); + struct u300_gpio *gpio = port->gpio; + int offset = d->irq - gpio->irq_base; u32 val; unsigned long flags; local_irq_save(flags); - if (value) { - val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } else { - val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } + val = readl(U300_PIN_REG(offset, ien)); + writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien)); local_irq_restore(flags); } -EXPORT_SYMBOL(gpio_pullup); -static irqreturn_t gpio_irq_handler(int irq, void *dev_id) +static struct irq_chip u300_gpio_irqchip = { + .name = "u300-gpio-irqchip", + .irq_enable = u300_gpio_irq_enable, + .irq_disable = u300_gpio_irq_disable, + .irq_set_type = u300_gpio_irq_type, + +}; + +static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc) { - struct u300_gpio_port *port = dev_id; - u32 val; - int pin; + struct u300_gpio_port *port = irq_get_handler_data(irq); + struct u300_gpio *gpio = port->gpio; + int pinoffset = port->number << 3; /* get the right stride */ + unsigned long val; + desc->irq_data.chip->irq_ack(&desc->irq_data); /* Read event register */ - val = readl(virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Mask with enable register */ - val &= readl(virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); + val = readl(U300_PIN_REG(pinoffset, iev)); /* Mask relevant bits */ - val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK; + val &= 0xFFU; /* 8 bits per port */ /* ACK IRQ (clear event) */ - writel(val, virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Print message */ - while (val != 0) { - unsigned gpio; - - pin = __ffs(val); - /* mask off this pin */ - val &= ~(1 << pin); - gpio = (port->number << 3) + pin; - - if (gpio_pin[gpio].callback) - (void)gpio_pin[gpio].callback(gpio_pin[gpio].data); - else - dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n", - gpio); + writel(val, U300_PIN_REG(pinoffset, iev)); + + /* Call IRQ handler */ + if (val != 0) { + int irqoffset; + + for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) { + int pin_irq = gpio->irq_base + (port->number << 3) + + irqoffset; + int offset = pinoffset + irqoffset; + + dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n", + pin_irq, offset); + generic_handle_irq(pin_irq); + /* + * Triggering IRQ on both rising and falling edge + * needs mockery + */ + if (port->toggle_edge_mode & U300_PIN_BIT(offset)) + u300_toggle_trigger(gpio, offset); + } } - return IRQ_HANDLED; + + desc->irq_data.chip->irq_unmask(&desc->irq_data); } -static void gpio_set_initial_values(void) +static void __init u300_gpio_init_pin(struct u300_gpio *gpio, + int offset, + const struct u300_gpio_confdata *conf) { -#ifdef U300_COH901571_3 - int i, j; - unsigned long flags; - u32 val; + /* Set mode: input or output */ + if (conf->output) { + u300_gpio_direction_output(&gpio->chip, offset, conf->outval); - /* Write default values to all pins */ - for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { - val = 0; - for (j = 0; j < 8; j++) - val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j; - local_irq_save(flags); - writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); + /* Deactivate bias mode for output */ + u300_gpio_config(&gpio->chip, offset, + GPIO_U300_CONFIG_BIAS_FLOAT, + NULL); + + /* Set drive mode for output */ + u300_gpio_config(&gpio->chip, offset, + GPIO_U300_CONFIG_DRIVE_PUSH_PULL, NULL); + + dev_dbg(gpio->dev, "set up pin %d as output, value: %d\n", + offset, conf->outval); + } else { + u300_gpio_direction_input(&gpio->chip, offset); + + /* Always set output low on input pins */ + u300_gpio_set(&gpio->chip, offset, 0); + + /* Set bias mode for input */ + u300_gpio_config(&gpio->chip, offset, conf->bias_mode, NULL); + + dev_dbg(gpio->dev, "set up pin %d as input, bias: %04x\n", + offset, conf->bias_mode); } +} - /* - * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED' - * to output and 'GPIO_IN' to input for each port. And initialize - * default value on outputs. - */ - for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { - for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) { - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + - i * U300_GPIO_PORTX_SPACING); - /* Mask out this pin */ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1)); - - if (u300_gpio_config[i][j].pin_usage != GPIO_IN) - val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1)); - writel(val, virtbase + U300_GPIO_PXPCR + - i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); +static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio, + struct u300_gpio_platform *plat) +{ + int i, j; + + /* Write default config and values to all pins */ + for (i = 0; i < plat->ports; i++) { + for (j = 0; j < 8; j++) { + const struct u300_gpio_confdata *conf; + int offset = (i*8) + j; + + if (plat->variant == U300_GPIO_COH901571_3_BS335) + conf = &bs335_gpio_config[i][j]; + else if (plat->variant == U300_GPIO_COH901571_3_BS365) + conf = &bs365_gpio_config[i][j]; + else + break; + + u300_gpio_init_pin(gpio, offset, conf); } } +} - /* Enable or disable the internal pull-ups in the GPIO ASIC block */ - for (i = 0; i < U300_GPIO_MAX; i++) { - val = 0; - for (j = 0; j < 8; j++) - val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j); - local_irq_save(flags); - writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); +static inline void u300_gpio_free_ports(struct u300_gpio *gpio) +{ + struct u300_gpio_port *port; + struct list_head *p, *n; + + list_for_each_safe(p, n, &gpio->port_list) { + port = list_entry(p, struct u300_gpio_port, node); + list_del(&port->node); + free_irq(port->irq, port); + kfree(port); } -#endif } -static int __init gpio_probe(struct platform_device *pdev) +static int __init u300_gpio_probe(struct platform_device *pdev) { - u32 val; + struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev); + struct u300_gpio *gpio; int err = 0; + int portno; + u32 val; + u32 ifr; int i; - int num_irqs; - gpiodev = &pdev->dev; - memset(gpio_pin, 0, sizeof(gpio_pin)); + gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL); + if (gpio == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + gpio->chip = u300_gpio_chip; + gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT; + gpio->irq_base = plat->gpio_irq_base; + gpio->chip.dev = &pdev->dev; + gpio->chip.base = plat->gpio_base; + gpio->dev = &pdev->dev; /* Get GPIO clock */ - clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) { - err = PTR_ERR(clk); - dev_err(gpiodev, "could not get GPIO clock\n"); + gpio->clk = clk_get(gpio->dev, NULL); + if (IS_ERR(gpio->clk)) { + err = PTR_ERR(gpio->clk); + dev_err(gpio->dev, "could not get GPIO clock\n"); goto err_no_clk; } - err = clk_enable(clk); + err = clk_enable(gpio->clk); if (err) { - dev_err(gpiodev, "could not enable GPIO clock\n"); + dev_err(gpio->dev, "could not enable GPIO clock\n"); goto err_no_clk_enable; } - memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!memres) + gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!gpio->memres) { + dev_err(gpio->dev, "could not get GPIO memory resource\n"); + err = -ENODEV; goto err_no_resource; + } - if (!request_mem_region(memres->start, resource_size(memres), + if (!request_mem_region(gpio->memres->start, + resource_size(gpio->memres), "GPIO Controller")) { err = -ENODEV; goto err_no_ioregion; } - virtbase = ioremap(memres->start, resource_size(memres)); - if (!virtbase) { + gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres)); + if (!gpio->base) { err = -ENOMEM; goto err_no_ioremap; } - dev_info(gpiodev, "remapped 0x%08x to %p\n", - memres->start, virtbase); - -#ifdef U300_COH901335 - dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n"); - /* Turn on the GPIO block */ - writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR); -#endif - -#ifdef U300_COH901571_3 - dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n"); - val = readl(virtbase + U300_GPIO_CR); - dev_info(gpiodev, "COH901571/3 block version: %d, " \ - "number of cores: %d\n", - ((val & 0x0000FE00) >> 9), - ((val & 0x000001FC) >> 2)); - writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR); -#endif - - gpio_set_initial_values(); - - for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) { - - gpio_ports[num_irqs].irq = - platform_get_irq_byname(pdev, - gpio_ports[num_irqs].name); - - err = request_irq(gpio_ports[num_irqs].irq, - gpio_irq_handler, IRQF_DISABLED, - gpio_ports[num_irqs].name, - &gpio_ports[num_irqs]); - if (err) { - dev_err(gpiodev, "cannot allocate IRQ for %s!\n", - gpio_ports[num_irqs].name); - goto err_no_irq; + + if (plat->variant == U300_GPIO_COH901335) { + dev_info(gpio->dev, + "initializing GPIO Controller COH 901 335\n"); + gpio->stride = U300_335_PORT_STRIDE; + gpio->pcr = U300_335_PXPCR; + gpio->dor = U300_335_PXPDOR; + gpio->dir = U300_335_PXPDIR; + gpio->per = U300_335_PXPER; + gpio->icr = U300_335_PXICR; + gpio->ien = U300_335_PXIEN; + gpio->iev = U300_335_PXIEV; + ifr = U300_335_PXIFR; + + /* Turn on the GPIO block */ + writel(U300_335_CR_BLOCK_CLOCK_ENABLE, + gpio->base + U300_335_CR); + } else if (plat->variant == U300_GPIO_COH901571_3_BS335 || + plat->variant == U300_GPIO_COH901571_3_BS365) { + dev_info(gpio->dev, + "initializing GPIO Controller COH 901 571/3\n"); + gpio->stride = U300_571_PORT_STRIDE; + gpio->pcr = U300_571_PXPCR; + gpio->dor = U300_571_PXPDOR; + gpio->dir = U300_571_PXPDIR; + gpio->per = U300_571_PXPER; + gpio->icr = U300_571_PXICR; + gpio->ien = U300_571_PXIEN; + gpio->iev = U300_571_PXIEV; + ifr = U300_571_PXIFR; + + val = readl(gpio->base + U300_571_CR); + dev_info(gpio->dev, "COH901571/3 block version: %d, " \ + "number of cores: %d totalling %d pins\n", + ((val & 0x000001FC) >> 2), + ((val & 0x0000FE00) >> 9), + ((val & 0x0000FE00) >> 9) * 8); + writel(U300_571_CR_BLOCK_CLKRQ_ENABLE, + gpio->base + U300_571_CR); + u300_gpio_init_coh901571(gpio, plat); + } else { + dev_err(gpio->dev, "unknown block variant\n"); + err = -ENODEV; + goto err_unknown_variant; + } + + /* Add each port with its IRQ separately */ + INIT_LIST_HEAD(&gpio->port_list); + for (portno = 0 ; portno < plat->ports; portno++) { + struct u300_gpio_port *port = + kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL); + + if (!port) { + dev_err(gpio->dev, "out of memory\n"); + err = -ENOMEM; + goto err_no_port; } - /* Turns off PortX_irq_force */ - writel(0x0, virtbase + U300_GPIO_PXIFR + - num_irqs * U300_GPIO_PORTX_SPACING); + + snprintf(port->name, 8, "gpio%d", portno); + port->number = portno; + port->gpio = gpio; + + port->irq = platform_get_irq_byname(pdev, + port->name); + + dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq, + port->name); + + irq_set_chained_handler(port->irq, u300_gpio_irq_handler); + irq_set_handler_data(port->irq, port); + + /* For each GPIO pin set the unique IRQ handler */ + for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) { + int irqno = gpio->irq_base + (portno << 3) + i; + + dev_dbg(gpio->dev, "handler for IRQ %d on %s\n", + irqno, port->name); + irq_set_chip_and_handler(irqno, &u300_gpio_irqchip, + handle_simple_irq); + set_irq_flags(irqno, IRQF_VALID); + irq_set_chip_data(irqno, port); + } + + /* Turns off irq force (test register) for this port */ + writel(0x0, gpio->base + portno * gpio->stride + ifr); + + list_add_tail(&port->node, &gpio->port_list); } + dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno); + + err = gpiochip_add(&gpio->chip); + if (err) { + dev_err(gpio->dev, "unable to add gpiochip: %d\n", err); + goto err_no_chip; + } + + platform_set_drvdata(pdev, gpio); return 0; - err_no_irq: - for (i = 0; i < num_irqs; i++) - free_irq(gpio_ports[i].irq, &gpio_ports[i]); - iounmap(virtbase); - err_no_ioremap: - release_mem_region(memres->start, resource_size(memres)); - err_no_ioregion: - err_no_resource: - clk_disable(clk); - err_no_clk_enable: - clk_put(clk); - err_no_clk: - dev_info(gpiodev, "module ERROR:%d\n", err); +err_no_chip: +err_no_port: + u300_gpio_free_ports(gpio); +err_unknown_variant: + iounmap(gpio->base); +err_no_ioremap: + release_mem_region(gpio->memres->start, resource_size(gpio->memres)); +err_no_ioregion: +err_no_resource: + clk_disable(gpio->clk); +err_no_clk_enable: + clk_put(gpio->clk); +err_no_clk: + kfree(gpio); + dev_info(&pdev->dev, "module ERROR:%d\n", err); return err; } -static int __exit gpio_remove(struct platform_device *pdev) +static int __exit u300_gpio_remove(struct platform_device *pdev) { - int i; + struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev); + struct u300_gpio *gpio = platform_get_drvdata(pdev); + int err; /* Turn off the GPIO block */ - writel(0x00000000U, virtbase + U300_GPIO_CR); - for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++) - free_irq(gpio_ports[i].irq, &gpio_ports[i]); - iounmap(virtbase); - release_mem_region(memres->start, resource_size(memres)); - clk_disable(clk); - clk_put(clk); + if (plat->variant == U300_GPIO_COH901335) + writel(0x00000000U, gpio->base + U300_335_CR); + if (plat->variant == U300_GPIO_COH901571_3_BS335 || + plat->variant == U300_GPIO_COH901571_3_BS365) + writel(0x00000000U, gpio->base + U300_571_CR); + + err = gpiochip_remove(&gpio->chip); + if (err < 0) { + dev_err(gpio->dev, "unable to remove gpiochip: %d\n", err); + return err; + } + u300_gpio_free_ports(gpio); + iounmap(gpio->base); + release_mem_region(gpio->memres->start, + resource_size(gpio->memres)); + clk_disable(gpio->clk); + clk_put(gpio->clk); + platform_set_drvdata(pdev, NULL); + kfree(gpio); return 0; } -static struct platform_driver gpio_driver = { +static struct platform_driver u300_gpio_driver = { .driver = { .name = "u300-gpio", }, - .remove = __exit_p(gpio_remove), + .remove = __exit_p(u300_gpio_remove), }; static int __init u300_gpio_init(void) { - return platform_driver_probe(&gpio_driver, gpio_probe); + return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe); } static void __exit u300_gpio_exit(void) { - platform_driver_unregister(&gpio_driver); + platform_driver_unregister(&u300_gpio_driver); } arch_initcall(u300_gpio_init); module_exit(u300_gpio_exit); MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); - -#ifdef U300_COH901571_3 -MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver"); -#endif - -#ifdef U300_COH901335 -MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver"); -#endif - +MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335/COH 901 571/3 GPIO driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 5d8aed5ec21b..c01e9519f6c1 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -35,7 +35,7 @@ #include <linux/slab.h> #include <mach/hardware.h> /* Pick up IXP2000-specific bits */ -#include <mach/gpio.h> +#include <mach/gpio-ixp2000.h> static inline int ixp2000_scl_pin(void *data) { diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index 000a78e5246c..6dede8f366c5 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c @@ -28,7 +28,7 @@ #include <linux/platform_device.h> #include <mach/board.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <mach/at91sam9_smc.h> #define DRV_NAME "at91_ide" diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 33d0bdc837c0..323bcdfff248 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -35,7 +35,7 @@ #include <linux/mutex.h> #include <linux/errno.h> #include <linux/slab.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <plat/keypad.h> #include <plat/menelaus.h> #include <asm/irq.h> diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c index 9cee8e7f0bcb..af5d9d061371 100644 --- a/drivers/mfd/menelaus.c +++ b/drivers/mfd/menelaus.c @@ -44,7 +44,7 @@ #include <asm/mach/irq.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <plat/menelaus.h> #define DRIVER_NAME "menelaus" diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 2d6423c2d193..166d149d931e 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -63,7 +63,7 @@ config AD525X_DPOT_SPI config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" - depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 + depends on HAVE_CLK help This option enables device driver support for the PWM channels on certain Atmel processors. Pulse Width Modulation is used for diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index a6c329040140..2dba999caf2c 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -33,7 +33,7 @@ #include <plat/board.h> #include <plat/mmc.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <plat/dma.h> #include <plat/mux.h> #include <plat/fpga.h> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 18b0bd31de78..21b00cefae63 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -21,7 +21,9 @@ #include <linux/mmc/card.h> #include <linux/mmc/host.h> -#include <mach/gpio.h> +#include <asm/gpio.h> + +#include <mach/gpio-tegra.h> #include <mach/sdhci.h> #include "sdhci-pltfm.h" diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 78017eb9318e..9e6b498c9beb 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -26,7 +26,7 @@ #include <asm/io.h> #include <mach/hardware.h> #include <asm/sizes.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <plat/board-ams-delta.h> /* diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index a916dec29215..6a1d6d9a2df9 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -40,7 +40,7 @@ #include <asm/mach/flash.h> #include <plat/gpmc.h> #include <plat/onenand.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <plat/dma.h> diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 29dc43523cec..48b4ec121f7f 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -35,7 +35,7 @@ #include <asm/mach-types.h> #include <mach/at91rm9200_emac.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <mach/board.h> #include "at91_ether.h" diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c index f56d7de7c751..22a75e610f12 100644 --- a/drivers/pcmcia/pxa2xx_balloon3.c +++ b/drivers/pcmcia/pxa2xx_balloon3.c @@ -97,7 +97,7 @@ static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt, static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) { - __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG | + __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG + ((state->flags & SS_RESET) ? BALLOON3_FPGA_SETnCLR : 0)); return 0; diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c index e956f659089a..66ab92cf3105 100644 --- a/drivers/pcmcia/pxa2xx_vpac270.c +++ b/drivers/pcmcia/pxa2xx_vpac270.c @@ -17,7 +17,7 @@ #include <asm/mach-types.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <mach/vpac270.h> #include "soc_common.h" diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 82dee9a6c0de..d3bff424286f 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -22,7 +22,7 @@ #include <asm/io.h> #include <mach/board.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <mach/cpu.h> /* SPI register offsets */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index b922f5d2e61e..caba6730a943 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -46,7 +46,7 @@ #ifdef CONFIG_ARM #include <mach/cpu.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #endif #define PDC_BUFFER_SIZE 512 diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index 653d6a60edb5..d1b41933199e 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -26,7 +26,7 @@ #include <mach/platform.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 8bdf25a8b023..f9a3f62a83b5 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -35,7 +35,7 @@ #include <mach/hardware.h> #include <mach/memory.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <mach/cputype.h> #include <asm/mach-types.h> diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index b0176e4569e0..61f4ee466df7 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -41,12 +41,6 @@ #include <linux/debugfs.h> #include <linux/seq_file.h> -#ifdef CONFIG_ARM -#include <mach/hardware.h> -#include <mach/memory.h> -#include <asm/mach-types.h> -#endif - #include <asm/uaccess.h> #include "musb_core.h" diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 817ab60f7537..dda920623c6a 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -21,7 +21,7 @@ #include <mach/board.h> #include <mach/cpu.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <video/atmel_lcdc.h> diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c index afea9abbd678..6ce34160da78 100644 --- a/drivers/video/mbx/mbxfb.c +++ b/drivers/video/mbx/mbxfb.c @@ -34,7 +34,7 @@ #include "regs.h" #include "reg_bits.h" -static unsigned long virt_base_2700; +static void __iomem *virt_base_2700; #define write_reg(val, reg) do { writel((val), (reg)); } while(0) @@ -850,7 +850,7 @@ static int mbxfb_suspend(struct platform_device *dev, pm_message_t state) { /* make frame buffer memory enter self-refresh mode */ write_reg_dly(LMPWR_MC_PWR_SRM, LMPWR); - while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM) + while (readl(LMPWRSTAT) != LMPWRSTAT_MC_PWR_SRM) ; /* empty statement */ /* reset the device, since it's initial state is 'mostly sleeping' */ @@ -946,7 +946,7 @@ static int __devinit mbxfb_probe(struct platform_device *dev) ret = -EINVAL; goto err3; } - virt_base_2700 = (unsigned long)mfbi->reg_virt_addr; + virt_base_2700 = mfbi->reg_virt_addr; mfbi->fb_virt_addr = ioremap_nocache(mfbi->fb_phys_addr, res_size(mfbi->fb_req)); diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c index 8df688748b5a..622ad839fd9d 100644 --- a/drivers/video/omap/lcd_h3.c +++ b/drivers/video/omap/lcd_h3.c @@ -23,7 +23,7 @@ #include <linux/platform_device.h> #include <linux/i2c/tps65010.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include "omapfb.h" #define MODULE_NAME "omapfb-lcd_h3" diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c index 9fff86f67bde..12cc52a70f96 100644 --- a/drivers/video/omap/lcd_inn1610.c +++ b/drivers/video/omap/lcd_inn1610.c @@ -22,7 +22,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include "omapfb.h" #define MODULE_NAME "omapfb-lcd_h3" diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c index b87e8b83f29c..6f8d13c41202 100644 --- a/drivers/video/omap/lcd_osk.c +++ b/drivers/video/omap/lcd_osk.c @@ -23,7 +23,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <plat/mux.h> #include "omapfb.h" diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c index ff0e6d7ab3a2..b51b332e5a2b 100644 --- a/drivers/video/omap/lcd_palmtt.c +++ b/drivers/video/omap/lcd_palmtt.c @@ -29,7 +29,7 @@ GPIO13 - screen blanking #include <linux/module.h> #include <linux/io.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include "omapfb.h" static int palmtt_panel_init(struct lcd_panel *panel, diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c index 5ec4f2d439c9..50e00395240f 100644 --- a/drivers/video/pnx4008/sdum.c +++ b/drivers/video/pnx4008/sdum.c @@ -30,7 +30,7 @@ #include <linux/clk.h> #include <linux/gfp.h> #include <asm/uaccess.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include "sdum.h" #include "fbcommon.h" diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 0f4e8c942f9e..389530bf1ada 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1309,16 +1309,6 @@ static int pxafb_smart_init(struct pxafb_info *fbi) return 0; } #else -int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int n_cmds) -{ - return 0; -} - -int pxafb_smart_flush(struct fb_info *info) -{ - return 0; -} - static inline int pxafb_smart_init(struct pxafb_info *fbi) { return 0; } #endif /* CONFIG_FB_PXA_SMARTPANEL */ |