diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/can/c_can.txt | 49 | ||||
| -rw-r--r-- | drivers/net/can/c_can/c_can_platform.c | 55 |
2 files changed, 87 insertions, 17 deletions
diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt new file mode 100644 index 000000000000..8f1ae81228e3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/c_can.txt @@ -0,0 +1,49 @@ +Bosch C_CAN/D_CAN controller Device Tree Bindings +------------------------------------------------- + +Required properties: +- compatible : Should be "bosch,c_can" for C_CAN controllers and + "bosch,d_can" for D_CAN controllers. +- reg : physical base address and size of the C_CAN/D_CAN + registers map +- interrupts : property with a value describing the interrupt + number + +Optional properties: +- ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the + instance number + +Note: "ti,hwmods" field is used to fetch the base address and irq +resources from TI, omap hwmod data base during device registration. +Future plan is to migrate hwmod data base contents into device tree +blob so that, all the required data will be used from device tree dts +file. + +Example: + +Step1: SoC common .dtsi file + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + +(or) + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + +Step 2: board specific .dts file + + &dcan1 { + status = "okay"; + }; diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index 5c46d1cc5cf5..d0a66cf298ba 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -30,6 +30,8 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/can/dev.h> @@ -65,17 +67,52 @@ static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv, writew(val, priv->base + 2 * priv->regs[index]); } +static struct platform_device_id c_can_id_table[] = { + [BOSCH_C_CAN_PLATFORM] = { + .name = KBUILD_MODNAME, + .driver_data = BOSCH_C_CAN, + }, + [BOSCH_C_CAN] = { + .name = "c_can", + .driver_data = BOSCH_C_CAN, + }, + [BOSCH_D_CAN] = { + .name = "d_can", + .driver_data = BOSCH_D_CAN, + }, { + } +}; + +static const struct of_device_id c_can_of_table[] = { + { .compatible = "bosch,c_can", .data = &c_can_id_table[BOSCH_C_CAN] }, + { .compatible = "bosch,d_can", .data = &c_can_id_table[BOSCH_D_CAN] }, + { /* sentinel */ }, +}; + static int __devinit c_can_plat_probe(struct platform_device *pdev) { int ret; void __iomem *addr; struct net_device *dev; struct c_can_priv *priv; + const struct of_device_id *match; const struct platform_device_id *id; struct resource *mem; int irq; struct clk *clk; + if (pdev->dev.of_node) { + match = of_match_device(c_can_of_table, &pdev->dev); + if (!match) { + dev_err(&pdev->dev, "Failed to find matching dt id\n"); + ret = -EINVAL; + goto exit; + } + id = match->data; + } else { + id = platform_get_device_id(pdev); + } + /* get the appropriate clk */ clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { @@ -114,7 +151,6 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) } priv = netdev_priv(dev); - id = platform_get_device_id(pdev); switch (id->driver_data) { case BOSCH_C_CAN: priv->regs = reg_map_c_can; @@ -195,26 +231,11 @@ static int __devexit c_can_plat_remove(struct platform_device *pdev) return 0; } -static const struct platform_device_id c_can_id_table[] = { - [BOSCH_C_CAN_PLATFORM] = { - .name = KBUILD_MODNAME, - .driver_data = BOSCH_C_CAN, - }, - [BOSCH_C_CAN] = { - .name = "c_can", - .driver_data = BOSCH_C_CAN, - }, - [BOSCH_D_CAN] = { - .name = "d_can", - .driver_data = BOSCH_D_CAN, - }, { - } -}; - static struct platform_driver c_can_plat_driver = { .driver = { .name = KBUILD_MODNAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(c_can_of_table), }, .probe = c_can_plat_probe, .remove = __devexit_p(c_can_plat_remove), |