diff options
42 files changed, 202 insertions, 187 deletions
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 5d0376b8f202..211e7785f4d2 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -17,7 +17,6 @@ Required properties: "fsl,imx6sx-usdhc" Optional properties: -- fsl,cd-controller : Indicate to use controller internal card detection - fsl,wp-controller : Indicate to use controller internal write protection - fsl,delay-line : Specify the number of delay cells for override mode. This is used to set the clock delay for DLL(Delay Line) on override mode @@ -35,7 +34,6 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-controller; fsl,wp-controller; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index dd45e6971bc3..9351296356dc 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "imx25.dtsi" @@ -114,8 +115,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 1 0>; - wp-gpios = <&gpio2 0 0>; + cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 93d3ea12328c..0f3fe29b816e 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -98,7 +98,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; bus-width = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index e9337ad52f59..3bc18835fb4b 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -103,8 +103,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d0e0f57eb432..53f40885c530 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -124,8 +124,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ab4ba39f2ed9..b0d5542ac829 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -147,8 +147,8 @@ &esdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc3>; - cd-gpios = <&gpio3 11 0>; - wp-gpios = <&gpio3 12 0>; + cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; bus-width = <8>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 1d325576bcc0..fc89ce1e5763 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -41,8 +41,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio3 13 0>; - wp-gpios = <&gpio4 11 0>; + cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 4f1f0e2868bf..e03373a58760 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -41,8 +41,8 @@ pinctrl-0 = <&pinctrl_esdhc2>, <&pinctrl_esdhc2_cdwp>; vmmc-supply = <®_3p3v>; - wp-gpios = <&gpio1 2 0>; - cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 704bd72cbfec..d3e50b22064f 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -183,7 +183,7 @@ }; &esdhc1 { - cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -191,7 +191,7 @@ }; &esdhc2 { - cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index c17d3ad6dba5..fc51b87ad208 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -119,8 +119,8 @@ &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio3 25 0>; - wp-gpios = <&gpio2 19 0>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 43cb3fd76be7..5111f5170d53 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -305,8 +305,8 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -314,8 +314,8 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 78df05e9d1ce..d6515f7a56c4 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -196,8 +197,8 @@ }; &usdhc3 { - cd-gpios = <&gpio6 11 0>; - wp-gpios = <&gpio6 14 0>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3 diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 703539cf36d3..00bd63e63d0c 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -161,7 +162,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; - cd-gpios = <&gpio6 11 0>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index a43abfa21e33..5645d52850a7 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -251,7 +251,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; - cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -260,7 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; - cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index e6d9195a1da7..f4d6ae564ead 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -173,7 +173,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -181,7 +181,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 1d85de2befb3..a47a0399a172 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -392,7 +392,7 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; no-1-8-v; status = "okay"; }; @@ -400,7 +400,7 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; no-1-8-v; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 59e5d15e3ec4..ff41f83551de 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -258,6 +258,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 2c253d6d20bd..45e7c39e80d5 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/gpio/gpio.h> + / { regulators { compatible = "simple-bus"; @@ -181,7 +183,7 @@ &usdhc2 { /* module slot */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio2 2 0>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index b5756c21ea1d..4493f6e99330 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -318,7 +318,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 86f03c1b147c..a857d1294609 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -324,7 +324,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 4a8d97f47759..1afe3385e2d2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -417,7 +417,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 62a82f3eba88..6dd0b764e036 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -299,6 +299,6 @@ &pinctrl_hummingboard_usdhc2 >; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 3af16dfe417b..d7fe6672d00c 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -453,7 +453,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -461,7 +461,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio2 6 0>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 1ce6133b67f5..9e6ecd99b472 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -409,8 +409,8 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -418,7 +418,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_cdwp>; - cd-gpios = <&gpio1 27 0>; - wp-gpios = <&gpio1 29 0>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 488a640796ac..3373fd958e95 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -342,7 +342,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -351,6 +351,6 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 3b24b12651b2..e329ca5c3322 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -467,8 +467,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - cd-gpios = <&gpio6 15 0>; - wp-gpios = <&gpio1 13 0>; + cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index e00c44f6a0df..782379320517 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -448,8 +448,8 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -457,7 +457,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio2 6 0>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index a626e6dd8022..944eb81cb2b8 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -562,8 +562,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <8>; - cd-gpios = <&gpio2 2 0>; - wp-gpios = <&gpio2 3 0>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -571,8 +571,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; - cd-gpios = <&gpio2 0 0>; - wp-gpios = <&gpio2 1 0>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index f02b80b41d4f..da08de324e9e 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -680,7 +680,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; no-1-8-v; - cd-gpios = <&gpio7 2 0>; + cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; fsl,wp-controller; status = "okay"; }; @@ -690,7 +690,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; no-1-8-v; - cd-gpios = <&gpio7 3 0>; + cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 5fb091675582..9e096d811bed 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -9,6 +9,8 @@ * */ +#include <dt-bindings/gpio/gpio.h> + / { regulators { compatible = "simple-bus"; @@ -250,13 +252,13 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio3 9 0>; + cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 945887d3fdb3..b84dff2e94ea 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -617,8 +617,8 @@ pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <8>; - cd-gpios = <&gpio4 7 0>; - wp-gpios = <&gpio4 6 0>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -627,8 +627,8 @@ pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - cd-gpios = <&gpio5 0 0>; - wp-gpios = <&gpio4 29 0>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -637,6 +637,6 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - cd-gpios = <&gpio3 22 0>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index e3c0b63c2205..115f3fd78971 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -49,7 +49,7 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; - cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; enable-sdio-wakeup; @@ -61,7 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; - cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; enable-sdio-wakup; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index cef04cef3a80..ac88c3467078 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -293,7 +293,7 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; - cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; enable-sdio-wakeup; @@ -304,7 +304,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 4d1a4b977d84..fdd1d7c9a5cc 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -234,8 +234,8 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio5 0 0>; - wp-gpios = <&gpio5 1 0>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; enable-sdio-wakeup; keep-power-in-suspend; status = "okay"; diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index c9c3d20b784b..a1b820fcb2a6 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -208,6 +208,8 @@ static ssize_t power_ro_lock_show(struct device *dev, ret = snprintf(buf, PAGE_SIZE, "%d\n", locked); + mmc_blk_put(md); + return ret; } diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index fd9a58e216a5..6a0f9c79be26 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -779,6 +779,7 @@ config MMC_TOSHIBA_PCI config MMC_MTK tristate "MediaTek SD/MMC Card Interface support" + depends on HAS_DMA help This selects the MediaTek(R) Secure digital and Multimedia card Interface. If you have a machine with a integrated SD/MMC card reader, say Y or M here. diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index b2b411da297b..4d1203236890 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1062,9 +1062,14 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) if (status & (CTO_EN | CCRC_EN)) end_cmd = 1; + if (host->data || host->response_busy) { + end_trans = !end_cmd; + host->response_busy = 0; + } if (status & (CTO_EN | DTO_EN)) hsmmc_command_incomplete(host, -ETIMEDOUT, end_cmd); - else if (status & (CCRC_EN | DCRC_EN)) + else if (status & (CCRC_EN | DCRC_EN | DEB_EN | CEB_EN | + BADA_EN)) hsmmc_command_incomplete(host, -EILSEQ, end_cmd); if (status & ACE_EN) { @@ -1081,10 +1086,6 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) } dev_dbg(mmc_dev(host->mmc), "AC12 err: 0x%x\n", ac12); } - if (host->data || host->response_busy) { - end_trans = !end_cmd; - host->response_busy = 0; - } } OMAP_HSMMC_WRITE(host->base, STAT, status); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index faf0cb910c96..c6b9f6492e1a 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -581,13 +581,8 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct pltfm_imx_data *imx_data = pltfm_host->priv; - struct esdhc_platform_data *boarddata = &imx_data->boarddata; - if (boarddata->f_max && (boarddata->f_max < pltfm_host->clock)) - return boarddata->f_max; - else - return pltfm_host->clock; + return pltfm_host->clock; } static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host) @@ -878,34 +873,19 @@ static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { static int sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, struct sdhci_host *host, - struct esdhc_platform_data *boarddata) + struct pltfm_imx_data *imx_data) { struct device_node *np = pdev->dev.of_node; - - if (!np) - return -ENODEV; - - if (of_get_property(np, "non-removable", NULL)) - boarddata->cd_type = ESDHC_CD_PERMANENT; - - if (of_get_property(np, "fsl,cd-controller", NULL)) - boarddata->cd_type = ESDHC_CD_CONTROLLER; + struct esdhc_platform_data *boarddata = &imx_data->boarddata; + int ret; if (of_get_property(np, "fsl,wp-controller", NULL)) boarddata->wp_type = ESDHC_WP_CONTROLLER; - boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); - if (gpio_is_valid(boarddata->cd_gpio)) - boarddata->cd_type = ESDHC_CD_GPIO; - boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0); if (gpio_is_valid(boarddata->wp_gpio)) boarddata->wp_type = ESDHC_WP_GPIO; - of_property_read_u32(np, "bus-width", &boarddata->max_bus_width); - - of_property_read_u32(np, "max-frequency", &boarddata->f_max); - if (of_find_property(np, "no-1-8-v", NULL)) boarddata->support_vsel = false; else @@ -916,29 +896,119 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, mmc_of_parse_voltage(np, &host->ocr_mask); + /* sdr50 and sdr104 needs work on 1.8v signal voltage */ + if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) && + !IS_ERR(imx_data->pins_default)) { + imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_100MHZ); + imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_200MHZ); + if (IS_ERR(imx_data->pins_100mhz) || + IS_ERR(imx_data->pins_200mhz)) { + dev_warn(mmc_dev(host->mmc), + "could not get ultra high speed state, work on normal mode\n"); + /* + * fall back to not support uhs by specify no 1.8v quirk + */ + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + } else { + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + /* call to generic mmc_of_parse to support additional capabilities */ - return mmc_of_parse(host->mmc); + ret = mmc_of_parse(host->mmc); + if (ret) + return ret; + + if (!IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc))) + host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; + + return 0; } #else static inline int sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, struct sdhci_host *host, - struct esdhc_platform_data *boarddata) + struct pltfm_imx_data *imx_data) { return -ENODEV; } #endif +static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev, + struct sdhci_host *host, + struct pltfm_imx_data *imx_data) +{ + struct esdhc_platform_data *boarddata = &imx_data->boarddata; + int err; + + if (!host->mmc->parent->platform_data) { + dev_err(mmc_dev(host->mmc), "no board data!\n"); + return -EINVAL; + } + + imx_data->boarddata = *((struct esdhc_platform_data *) + host->mmc->parent->platform_data); + /* write_protect */ + if (boarddata->wp_type == ESDHC_WP_GPIO) { + err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio); + if (err) { + dev_err(mmc_dev(host->mmc), + "failed to request write-protect gpio!\n"); + return err; + } + host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + } + + /* card_detect */ + switch (boarddata->cd_type) { + case ESDHC_CD_GPIO: + err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0); + if (err) { + dev_err(mmc_dev(host->mmc), + "failed to request card-detect gpio!\n"); + return err; + } + /* fall through */ + + case ESDHC_CD_CONTROLLER: + /* we have a working card_detect back */ + host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; + break; + + case ESDHC_CD_PERMANENT: + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + break; + + case ESDHC_CD_NONE: + break; + } + + switch (boarddata->max_bus_width) { + case 8: + host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA; + break; + case 4: + host->mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + case 1: + default: + host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; + break; + } + + return 0; +} + static int sdhci_esdhc_imx_probe(struct platform_device *pdev) { const struct of_device_id *of_id = of_match_device(imx_esdhc_dt_ids, &pdev->dev); struct sdhci_pltfm_host *pltfm_host; struct sdhci_host *host; - struct esdhc_platform_data *boarddata; int err; struct pltfm_imx_data *imx_data; - bool dt = true; host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, 0); if (IS_ERR(host)) @@ -1030,84 +1100,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536) host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; - boarddata = &imx_data->boarddata; - if (sdhci_esdhc_imx_probe_dt(pdev, host, boarddata) < 0) { - if (!host->mmc->parent->platform_data) { - dev_err(mmc_dev(host->mmc), "no board data!\n"); - err = -EINVAL; - goto disable_clk; - } - imx_data->boarddata = *((struct esdhc_platform_data *) - host->mmc->parent->platform_data); - dt = false; - } - /* write_protect */ - if (boarddata->wp_type == ESDHC_WP_GPIO && !dt) { - err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio); - if (err) { - dev_err(mmc_dev(host->mmc), - "failed to request write-protect gpio!\n"); - goto disable_clk; - } - host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; - } - - /* card_detect */ - switch (boarddata->cd_type) { - case ESDHC_CD_GPIO: - if (dt) - break; - err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0); - if (err) { - dev_err(mmc_dev(host->mmc), - "failed to request card-detect gpio!\n"); - goto disable_clk; - } - /* fall through */ - - case ESDHC_CD_CONTROLLER: - /* we have a working card_detect back */ - host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; - break; - - case ESDHC_CD_PERMANENT: - host->mmc->caps |= MMC_CAP_NONREMOVABLE; - break; - - case ESDHC_CD_NONE: - break; - } - - switch (boarddata->max_bus_width) { - case 8: - host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA; - break; - case 4: - host->mmc->caps |= MMC_CAP_4_BIT_DATA; - break; - case 1: - default: - host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; - break; - } - - /* sdr50 and sdr104 needs work on 1.8v signal voltage */ - if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) && - !IS_ERR(imx_data->pins_default)) { - imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, - ESDHC_PINCTRL_STATE_100MHZ); - imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, - ESDHC_PINCTRL_STATE_200MHZ); - if (IS_ERR(imx_data->pins_100mhz) || - IS_ERR(imx_data->pins_200mhz)) { - dev_warn(mmc_dev(host->mmc), - "could not get ultra high speed state, work on normal mode\n"); - /* fall back to not support uhs by specify no 1.8v quirk */ - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; - } - } else { - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; - } + if (of_id) + err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data); + else + err = sdhci_esdhc_imx_probe_nondt(pdev, host, imx_data); + if (err) + goto disable_clk; err = sdhci_add_host(host); if (err) diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index 3497cfaf683c..a870c42731d7 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -45,6 +45,6 @@ #define ESDHC_DMA_SYSCTL 0x40c #define ESDHC_DMA_SNOOP 0x00000040 -#define ESDHC_HOST_CONTROL_RES 0x05 +#define ESDHC_HOST_CONTROL_RES 0x01 #endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */ diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index 9cd5fc62f130..946d37f94a31 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -411,6 +411,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev) goto err_of_parse; sdhci_get_of_property(pdev); pdata = pxav3_get_mmc_pdata(dev); + pdev->dev.platform_data = pdata; } else if (pdata) { /* on-chip device */ if (pdata->flags & PXA_FLAG_CARD_PERMANENT) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index bc1445238fb3..1dbe93232030 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2866,6 +2866,7 @@ int sdhci_add_host(struct sdhci_host *host) u32 max_current_caps; unsigned int ocr_avail; unsigned int override_timeout_clk; + u32 max_clk; int ret; WARN_ON(host == NULL); @@ -2978,8 +2979,11 @@ int sdhci_add_host(struct sdhci_host *host) GFP_KERNEL); host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL); if (!host->adma_table || !host->align_buffer) { - dma_free_coherent(mmc_dev(mmc), host->adma_table_sz, - host->adma_table, host->adma_addr); + if (host->adma_table) + dma_free_coherent(mmc_dev(mmc), + host->adma_table_sz, + host->adma_table, + host->adma_addr); kfree(host->align_buffer); pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n", mmc_hostname(mmc)); @@ -3047,18 +3051,22 @@ int sdhci_add_host(struct sdhci_host *host) * Set host parameters. */ mmc->ops = &sdhci_ops; - mmc->f_max = host->max_clk; + max_clk = host->max_clk; + if (host->ops->get_min_clock) mmc->f_min = host->ops->get_min_clock(host); else if (host->version >= SDHCI_SPEC_300) { if (host->clk_mul) { mmc->f_min = (host->max_clk * host->clk_mul) / 1024; - mmc->f_max = host->max_clk * host->clk_mul; + max_clk = host->max_clk * host->clk_mul; } else mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; } else mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; + if (!mmc->f_max || (mmc->f_max && (mmc->f_max > max_clk))) + mmc->f_max = max_clk; + if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { host->timeout_clk = (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT; diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index 75f70f6ac137..e1571efa3f2b 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -43,7 +43,6 @@ struct esdhc_platform_data { enum wp_types wp_type; enum cd_types cd_type; int max_bus_width; - unsigned int f_max; bool support_vsel; unsigned int delay_line; }; |