diff options
| -rw-r--r-- | drivers/rtc/class.c | 3 | ||||
| -rw-r--r-- | drivers/rtc/systohc.c | 53 | ||||
| -rw-r--r-- | include/linux/rtc.h | 43 | ||||
| -rw-r--r-- | kernel/time/ntp.c | 166 |
4 files changed, 196 insertions, 69 deletions
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c index 2ed970d61da1..722d683e0b0f 100644 --- a/drivers/rtc/class.c +++ b/drivers/rtc/class.c @@ -161,6 +161,9 @@ static struct rtc_device *rtc_allocate_device(void) device_initialize(&rtc->dev); + /* Drivers can revise this default after allocating the device. */ + rtc->set_offset_nsec = NSEC_PER_SEC / 2; + rtc->irq_freq = 1; rtc->max_user_freq = 64; rtc->dev.class = rtc_class; diff --git a/drivers/rtc/systohc.c b/drivers/rtc/systohc.c index b4a68ffcd06b..0c177647ea6c 100644 --- a/drivers/rtc/systohc.c +++ b/drivers/rtc/systohc.c @@ -10,6 +10,7 @@ /** * rtc_set_ntp_time - Save NTP synchronized time to the RTC * @now: Current time of day + * @target_nsec: pointer for desired now->tv_nsec value * * Replacement for the NTP platform function update_persistent_clock64 * that stores time for later retrieval by rtc_hctosys. @@ -18,30 +19,52 @@ * possible at all, and various other -errno for specific temporary failure * cases. * + * -EPROTO is returned if now.tv_nsec is not close enough to *target_nsec. + ( * If temporary failure is indicated the caller should try again 'soon' */ -int rtc_set_ntp_time(struct timespec64 now) +int rtc_set_ntp_time(struct timespec64 now, unsigned long *target_nsec) { struct rtc_device *rtc; struct rtc_time tm; + struct timespec64 to_set; int err = -ENODEV; - - if (now.tv_nsec < (NSEC_PER_SEC >> 1)) - rtc_time64_to_tm(now.tv_sec, &tm); - else - rtc_time64_to_tm(now.tv_sec + 1, &tm); + bool ok; rtc = rtc_class_open(CONFIG_RTC_SYSTOHC_DEVICE); - if (rtc) { - /* rtc_hctosys exclusively uses UTC, so we call set_time here, - * not set_mmss. */ - if (rtc->ops && - (rtc->ops->set_time || - rtc->ops->set_mmss64 || - rtc->ops->set_mmss)) - err = rtc_set_time(rtc, &tm); - rtc_class_close(rtc); + if (!rtc) + goto out_err; + + if (!rtc->ops || (!rtc->ops->set_time && !rtc->ops->set_mmss64 && + !rtc->ops->set_mmss)) + goto out_close; + + /* Compute the value of tv_nsec we require the caller to supply in + * now.tv_nsec. This is the value such that (now + + * set_offset_nsec).tv_nsec == 0. + */ + set_normalized_timespec64(&to_set, 0, -rtc->set_offset_nsec); + *target_nsec = to_set.tv_nsec; + + /* The ntp code must call this with the correct value in tv_nsec, if + * it does not we update target_nsec and return EPROTO to make the ntp + * code try again later. + */ + ok = rtc_tv_nsec_ok(rtc->set_offset_nsec, &to_set, &now); + if (!ok) { + err = -EPROTO; + goto out_close; } + rtc_time64_to_tm(to_set.tv_sec, &tm); + + /* rtc_hctosys exclusively uses UTC, so we call set_time here, not + * set_mmss. + */ + err = rtc_set_time(rtc, &tm); + +out_close: + rtc_class_close(rtc); +out_err: return err; } diff --git a/include/linux/rtc.h b/include/linux/rtc.h index e6d0f9c1cafd..5b13fa029fd6 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -135,6 +135,14 @@ struct rtc_device { /* Some hardware can't support UIE mode */ int uie_unsupported; + /* Number of nsec it takes to set the RTC clock. This influences when + * the set ops are called. An offset: + * - of 0.5 s will call RTC set for wall clock time 10.0 s at 9.5 s + * - of 1.5 s will call RTC set for wall clock time 10.0 s at 8.5 s + * - of -0.5 s will call RTC set for wall clock time 10.0 s at 10.5 s + */ + long set_offset_nsec; + bool registered; struct nvmem_config *nvmem_config; @@ -172,7 +180,7 @@ extern void devm_rtc_device_unregister(struct device *dev, extern int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm); extern int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm); -extern int rtc_set_ntp_time(struct timespec64 now); +extern int rtc_set_ntp_time(struct timespec64 now, unsigned long *target_nsec); int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm); extern int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alrm); @@ -221,6 +229,39 @@ static inline bool is_leap_year(unsigned int year) return (!(year % 4) && (year % 100)) || !(year % 400); } +/* Determine if we can call to driver to set the time. Drivers can only be + * called to set a second aligned time value, and the field set_offset_nsec + * specifies how far away from the second aligned time to call the driver. + * + * This also computes 'to_set' which is the time we are trying to set, and has + * a zero in tv_nsecs, such that: + * to_set - set_delay_nsec == now +/- FUZZ + * + */ +static inline bool rtc_tv_nsec_ok(s64 set_offset_nsec, + struct timespec64 *to_set, + const struct timespec64 *now) +{ + /* Allowed error in tv_nsec, arbitarily set to 5 jiffies in ns. */ + const unsigned long TIME_SET_NSEC_FUZZ = TICK_NSEC * 5; + struct timespec64 delay = {.tv_sec = 0, + .tv_nsec = set_offset_nsec}; + + *to_set = timespec64_add(*now, delay); + + if (to_set->tv_nsec < TIME_SET_NSEC_FUZZ) { + to_set->tv_nsec = 0; + return true; + } + + if (to_set->tv_nsec > NSEC_PER_SEC - TIME_SET_NSEC_FUZZ) { + to_set->tv_sec++; + to_set->tv_nsec = 0; + return true; + } + return false; +} + #define rtc_register_device(device) \ __rtc_register_device(THIS_MODULE, device) diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index edf19cc53140..bc19de1a0683 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -492,6 +492,67 @@ out: return leap; } +static void sync_hw_clock(struct work_struct *work); +static DECLARE_DELAYED_WORK(sync_work, sync_hw_clock); + +static void sched_sync_hw_clock(struct timespec64 now, + unsigned long target_nsec, bool fail) + +{ + struct timespec64 next; + + getnstimeofday64(&next); + if (!fail) + next.tv_sec = 659; + else { + /* + * Try again as soon as possible. Delaying long periods + * decreases the accuracy of the work queue timer. Due to this + * the algorithm is very likely to require a short-sleep retry + * after the above long sleep to synchronize ts_nsec. + */ + next.tv_sec = 0; + } + + /* Compute the needed delay that will get to tv_nsec == target_nsec */ + next.tv_nsec = target_nsec - next.tv_nsec; + if (next.tv_nsec <= 0) + next.tv_nsec += NSEC_PER_SEC; + if (next.tv_nsec >= NSEC_PER_SEC) { + next.tv_sec++; + next.tv_nsec -= NSEC_PER_SEC; + } + + queue_delayed_work(system_power_efficient_wq, &sync_work, + timespec64_to_jiffies(&next)); +} + +static void sync_rtc_clock(void) +{ + unsigned long target_nsec; + struct timespec64 adjust, now; + int rc; + + if (!IS_ENABLED(CONFIG_RTC_SYSTOHC)) + return; + + getnstimeofday64(&now); + + adjust = now; + if (persistent_clock_is_local) + adjust.tv_sec -= (sys_tz.tz_minuteswest * 60); + + /* + * The current RTC in use will provide the target_nsec it wants to be + * called at, and does rtc_tv_nsec_ok internally. + */ + rc = rtc_set_ntp_time(adjust, &target_nsec); + if (rc == -ENODEV) + return; + + sched_sync_hw_clock(now, target_nsec, rc); +} + #ifdef CONFIG_GENERIC_CMOS_UPDATE int __weak update_persistent_clock(struct timespec now) { @@ -507,76 +568,75 @@ int __weak update_persistent_clock64(struct timespec64 now64) } #endif -#if defined(CONFIG_GENERIC_CMOS_UPDATE) || defined(CONFIG_RTC_SYSTOHC) -static void sync_cmos_clock(struct work_struct *work); - -static DECLARE_DELAYED_WORK(sync_cmos_work, sync_cmos_clock); - -static void sync_cmos_clock(struct work_struct *work) +static bool sync_cmos_clock(void) { + static bool no_cmos; struct timespec64 now; - struct timespec64 next; - int fail = 1; + struct timespec64 adjust; + int rc = -EPROTO; + long target_nsec = NSEC_PER_SEC / 2; + + if (!IS_ENABLED(CONFIG_GENERIC_CMOS_UPDATE)) + return false; + + if (no_cmos) + return false; /* - * If we have an externally synchronized Linux clock, then update - * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be - * called as close as possible to 500 ms before the new second starts. - * This code is run on a timer. If the clock is set, that timer - * may not expire at the correct time. Thus, we adjust... - * We want the clock to be within a couple of ticks from the target. + * Historically update_persistent_clock64() has followed x86 + * semantics, which match the MC146818A/etc RTC. This RTC will store + * 'adjust' and then in .5s it will advance once second. + * + * Architectures are strongly encouraged to use rtclib and not + * implement this legacy API. */ - if (!ntp_synced()) { - /* - * Not synced, exit, do not restart a timer (if one is - * running, let it run out). - */ - return; - } - getnstimeofday64(&now); - if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec * 5) { - struct timespec64 adjust = now; - - fail = -ENODEV; + if (rtc_tv_nsec_ok(-1 * target_nsec, &adjust, &now)) { if (persistent_clock_is_local) adjust.tv_sec -= (sys_tz.tz_minuteswest * 60); -#ifdef CONFIG_GENERIC_CMOS_UPDATE - fail = update_persistent_clock64(adjust); -#endif - -#ifdef CONFIG_RTC_SYSTOHC - if (fail == -ENODEV) - fail = rtc_set_ntp_time(adjust); -#endif + rc = update_persistent_clock64(adjust); + /* + * The machine does not support update_persistent_clock64 even + * though it defines CONFIG_GENERIC_CMOS_UPDATE. + */ + if (rc == -ENODEV) { + no_cmos = true; + return false; + } } - next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec - (TICK_NSEC / 2); - if (next.tv_nsec <= 0) - next.tv_nsec += NSEC_PER_SEC; + sched_sync_hw_clock(now, target_nsec, rc); + return true; +} - if (!fail || fail == -ENODEV) - next.tv_sec = 659; - else - next.tv_sec = 0; +/* + * If we have an externally synchronized Linux clock, then update RTC clock + * accordingly every ~11 minutes. Generally RTCs can only store second + * precision, but many RTCs will adjust the phase of their second tick to + * match the moment of update. This infrastructure arranges to call to the RTC + * set at the correct moment to phase synchronize the RTC second tick over + * with the kernel clock. + */ +static void sync_hw_clock(struct work_struct *work) +{ + if (!ntp_synced()) + return; - if (next.tv_nsec >= NSEC_PER_SEC) { - next.tv_sec++; - next.tv_nsec -= NSEC_PER_SEC; - } - queue_delayed_work(system_power_efficient_wq, - &sync_cmos_work, timespec64_to_jiffies(&next)); + if (sync_cmos_clock()) + return; + + sync_rtc_clock(); } void ntp_notify_cmos_timer(void) { - queue_delayed_work(system_power_efficient_wq, &sync_cmos_work, 0); -} - -#else -void ntp_notify_cmos_timer(void) { } -#endif + if (!ntp_synced()) + return; + if (IS_ENABLED(CONFIG_GENERIC_CMOS_UPDATE) || + IS_ENABLED(CONFIG_RTC_SYSTOHC)) + queue_delayed_work(system_power_efficient_wq, &sync_work, 0); +} /* * Propagate a new txc->status value into the NTP state: |