diff options
| -rw-r--r-- | arch/sh/Kconfig | 10 | ||||
| -rw-r--r-- | arch/sh/Makefile | 1 | ||||
| -rw-r--r-- | arch/sh/boards/se/7300/Makefile | 5 | ||||
| -rw-r--r-- | arch/sh/boards/se/7300/io.c | 268 | ||||
| -rw-r--r-- | arch/sh/boards/se/7300/irq.c | 40 | ||||
| -rw-r--r-- | arch/sh/boards/se/7300/setup.c | 74 | ||||
| -rw-r--r-- | arch/sh/configs/se7300_defconfig | 696 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/irq/ipr.c | 2 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/sh3/Makefile | 4 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/sh3/clock-sh7710.c (renamed from arch/sh/kernel/cpu/sh3/clock-sh7300.c) | 26 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/sh3/setup-sh7300.c | 43 | ||||
| -rw-r--r-- | arch/sh/kernel/setup.c | 1 | ||||
| -rw-r--r-- | arch/sh/kernel/timers/timer-tmu.c | 3 | ||||
| -rw-r--r-- | arch/sh/mm/Kconfig | 4 | ||||
| -rw-r--r-- | arch/sh/tools/mach-types | 1 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.c | 9 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.h | 30 | ||||
| -rw-r--r-- | include/asm-sh/bugs.h | 2 | ||||
| -rw-r--r-- | include/asm-sh/cpu-sh3/freq.h | 4 | ||||
| -rw-r--r-- | include/asm-sh/cpu-sh3/mmu_context.h | 1 | ||||
| -rw-r--r-- | include/asm-sh/cpu-sh3/timer.h | 3 | ||||
| -rw-r--r-- | include/asm-sh/processor.h | 2 | ||||
| -rw-r--r-- | include/asm-sh/se7300.h | 64 | ||||
| -rw-r--r-- | include/asm-sh/ubc.h | 3 |
24 files changed, 31 insertions, 1265 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ec2beabb193c..54878f07cf0c 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -264,14 +264,6 @@ config SH_7780_SOLUTION_ENGINE Select 7780 SolutionEngine if configuring for a Renesas SH7780 evaluation board. -config SH_7300_SOLUTION_ENGINE - bool "SolutionEngine7300" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7300 - help - Select 7300 SolutionEngine if configuring for a Hitachi - SH7300(SH-Mobile V) evaluation board. - config SH_7343_SOLUTION_ENGINE bool "SolutionEngine7343" select SOLUTION_ENGINE @@ -446,7 +438,7 @@ config SH_PCLK_FREQ default "27000000" if CPU_SUBTYPE_SH7343 default "31250000" if CPU_SUBTYPE_SH7619 default "32000000" if CPU_SUBTYPE_SH7722 - default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ + default "33333333" if CPU_SUBTYPE_SH7770 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7206 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R diff --git a/arch/sh/Makefile b/arch/sh/Makefile index cb6661c5efe4..3d211aa33cd8 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -91,7 +91,6 @@ machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 -machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) += se/7300 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 machdir-$(CONFIG_SH_HP6XX) += hp6xx machdir-$(CONFIG_SH_DREAMCAST) += dreamcast diff --git a/arch/sh/boards/se/7300/Makefile b/arch/sh/boards/se/7300/Makefile deleted file mode 100644 index 46247368f14b..000000000000 --- a/arch/sh/boards/se/7300/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the 7300 SolutionEngine specific parts of the kernel -# - -obj-y := setup.o io.o irq.o diff --git a/arch/sh/boards/se/7300/io.c b/arch/sh/boards/se/7300/io.c deleted file mode 100644 index 8a03d7a52a7c..000000000000 --- a/arch/sh/boards/se/7300/io.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * arch/sh/boards/se/7300/io.c - * - * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> - * Based on arch/sh/kernel/io_shmse.c - * - * I/O routine for SH-Mobile3 73180 SolutionEngine. - * - */ - -#include <linux/kernel.h> -#include <asm/io.h> -#include <asm/se7300.h> - -#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) - -struct iop { - unsigned long start, end; - unsigned long base; - struct iop *(*check) (struct iop * p, unsigned long port); - unsigned char (*inb) (struct iop * p, unsigned long port); - unsigned short (*inw) (struct iop * p, unsigned long port); - void (*outb) (struct iop * p, unsigned char value, unsigned long port); - void (*outw) (struct iop * p, unsigned short value, unsigned long port); -}; - -struct iop * -simple_check(struct iop *p, unsigned long port) -{ - if ((p->start <= port) && (port <= p->end)) - return p; - else - badio(check, port); -} - -struct iop * -ide_check(struct iop *p, unsigned long port) -{ - if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) - return p; - return NULL; -} - -unsigned char -simple_inb(struct iop *p, unsigned long port) -{ - return *(unsigned char *) (p->base + port); -} - -unsigned short -simple_inw(struct iop *p, unsigned long port) -{ - return *(unsigned short *) (p->base + port); -} - -void -simple_outb(struct iop *p, unsigned char value, unsigned long port) -{ - *(unsigned char *) (p->base + port) = value; -} - -void -simple_outw(struct iop *p, unsigned short value, unsigned long port) -{ - *(unsigned short *) (p->base + port) = value; -} - -unsigned char -pcc_inb(struct iop *p, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - unsigned long v; - - if (port & 1) - addr += 0x00400000; - v = *(volatile unsigned char *) addr; - return v; -} - -void -pcc_outb(struct iop *p, unsigned char value, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - - if (port & 1) - addr += 0x00400000; - *(volatile unsigned char *) addr = value; -} - -unsigned char -bad_inb(struct iop *p, unsigned long port) -{ - badio(inb, port); -} - -void -bad_outb(struct iop *p, unsigned char value, unsigned long port) -{ - badio(inw, port); -} - -#ifdef CONFIG_SMC91X -/* MSTLANEX01 LAN at 0xb400:0000 */ -static struct iop laniop = { - .start = 0x300, - .end = 0x30f, - .base = 0xb4000000, - .check = simple_check, - .inb = simple_inb, - .inw = simple_inw, - .outb = simple_outb, - .outw = simple_outw, -}; -#endif - -/* NE2000 pc card NIC */ -static struct iop neiop = { - .start = 0x280, - .end = 0x29f, - .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ - .check = simple_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; - -#ifdef CONFIG_IDE -/* CF in CF slot */ -static struct iop cfiop = { - .base = 0xb0600000, - .check = ide_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; -#endif - -static __inline__ struct iop * -port2iop(unsigned long port) -{ - if (0) ; -#if defined(CONFIG_SMC91X) - else if (laniop.check(&laniop, port)) - return &laniop; -#endif -#if defined(CONFIG_NE2000) - else if (neiop.check(&neiop, port)) - return &neiop; -#endif -#if defined(CONFIG_IDE) - else if (cfiop.check(&cfiop, port)) - return &cfiop; -#endif - else - return &neiop; /* fallback */ -} - -static inline void -delay(void) -{ - ctrl_inw(0xac000000); - ctrl_inw(0xac000000); -} - -unsigned char -sh7300se_inb(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inb) (p, port); -} - -unsigned char -sh7300se_inb_p(unsigned long port) -{ - unsigned char v = sh7300se_inb(port); - delay(); - return v; -} - -unsigned short -sh7300se_inw(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inw) (p, port); -} - -unsigned int -sh7300se_inl(unsigned long port) -{ - badio(inl, port); -} - -void -sh7300se_outb(unsigned char value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outb) (p, value, port); -} - -void -sh7300se_outb_p(unsigned char value, unsigned long port) -{ - sh7300se_outb(value, port); - delay(); -} - -void -sh7300se_outw(unsigned short value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outw) (p, value, port); -} - -void -sh7300se_outl(unsigned int value, unsigned long port) -{ - badio(outl, port); -} - -void -sh7300se_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned char *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inb) (p, port); -} - -void -sh7300se_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned short *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inw) (p, port); -} - -void -sh7300se_insl(unsigned long port, void *addr, unsigned long count) -{ - badio(insl, port); -} - -void -sh7300se_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned char *a = (unsigned char *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outb) (p, *a++, port); -} - -void -sh7300se_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned short *a = (unsigned short *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outw) (p, *a++, port); -} - -void -sh7300se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - badio(outsw, port); -} diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c deleted file mode 100644 index 1279d776d60f..000000000000 --- a/arch/sh/boards/se/7300/irq.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/sh/boards/se/7300/irq.c - * - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * - * SH-Mobile SolutionEngine 7300 Support. - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/se7300.h> - -static struct ipr_data se7300_ipr_map[] = { - /* PC_IRQ[0-3] -> IRQ0 (32) */ - { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ }, - /* A_IRQ[0-3] -> IRQ1 (33) */ - { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ }, - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, -}; - -/* - * Initialize IRQ setting - */ -void __init -init_7300se_IRQ(void) -{ - ctrl_outw(0x0028, PA_EPLD_MODESET); /* mode set IRQ0,1 active low. */ - ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */ - ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */ - - make_ipr_irq(se7300_ipr_map, ARRAY_SIZE(se7300_ipr_map)); - - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ -} diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c deleted file mode 100644 index eb469f5b6e97..000000000000 --- a/arch/sh/boards/se/7300/setup.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/sh/boards/se/7300/setup.c - * - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * - * SH-Mobile SolutionEngine 7300 Support. - * - */ -#include <linux/init.h> -#include <linux/platform_device.h> -#include <asm/machvec.h> -#include <asm/se7300.h> - -void init_7300se_IRQ(void); - -static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; - -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device heartbeat_device = { - .name = "heartbeat", - .id = -1, - .dev = { - .platform_data = heartbeat_bit_pos, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, -}; - -static struct platform_device *se7300_devices[] __initdata = { - &heartbeat_device, -}; - -static int __init se7300_devices_setup(void) -{ - return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices)); -} -__initcall(se7300_devices_setup); - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_7300se __initmv = { - .mv_name = "SolutionEngine 7300", - .mv_nr_irqs = 109, - .mv_inb = sh7300se_inb, - .mv_inw = sh7300se_inw, - .mv_inl = sh7300se_inl, - .mv_outb = sh7300se_outb, - .mv_outw = sh7300se_outw, - .mv_outl = sh7300se_outl, - - .mv_inb_p = sh7300se_inb_p, - .mv_inw_p = sh7300se_inw, - .mv_inl_p = sh7300se_inl, - .mv_outb_p = sh7300se_outb_p, - .mv_outw_p = sh7300se_outw, - .mv_outl_p = sh7300se_outl, - - .mv_insb = sh7300se_insb, - .mv_insw = sh7300se_insw, - .mv_insl = sh7300se_insl, - .mv_outsb = sh7300se_outsb, - .mv_outsw = sh7300se_outsw, - .mv_outsl = sh7300se_outsl, - - .mv_init_irq = init_7300se_IRQ, -}; diff --git a/arch/sh/configs/se7300_defconfig b/arch/sh/configs/se7300_defconfig deleted file mode 100644 index 8a217908b81f..000000000000 --- a/arch/sh/configs/se7300_defconfig +++ /dev/null @@ -1,696 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:43:22 2006 -# -CONFIG_SUPERH=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set -# CONFIG_IKCONFIG is not set -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" - -# -# System type -# -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -CONFIG_SH_7300_SOLUTION_ENGINE=y -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# -CONFIG_CPU_SH3=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -CONFIG_CPU_SUBTYPE_SH7300=y -# CONFIG_CPU_SUBTYPE_SH7705 is not set -# CONFIG_CPU_SUBTYPE_SH7706 is not set -# CONFIG_CPU_SUBTYPE_SH7707 is not set -# CONFIG_CPU_SUBTYPE_SH7708 is not set -# CONFIG_CPU_SUBTYPE_SH7709 is not set -# CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7750 is not set -# CONFIG_CPU_SUBTYPE_SH7091 is not set -# CONFIG_CPU_SUBTYPE_SH7750R is not set -# CONFIG_CPU_SUBTYPE_SH7750S is not set -# CONFIG_CPU_SUBTYPE_SH7751 is not set -# CONFIG_CPU_SUBTYPE_SH7751R is not set -# CONFIG_CPU_SUBTYPE_SH7760 is not set -# CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7770 is not set -# CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set -# CONFIG_CPU_SUBTYPE_SH7343 is not set - -# -# Memory management options -# -CONFIG_MMU=y -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_MEMORY_START=0x0c000000 -CONFIG_MEMORY_SIZE=0x04000000 -CONFIG_VSYSCALL=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set - -# -# Cache configuration -# -# CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set - -# -# Processor features -# -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_SH_FPU_EMU is not set -CONFIG_SH_DSP=y -# CONFIG_SH_ADC is not set -CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_SR_RB=y - -# -# Timer support -# -CONFIG_SH_TMU=y -CONFIG_SH_PCLK_FREQ=33333333 - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# DMA support -# -# CONFIG_SH_DMA is not set - -# -# Companion Chips -# -# CONFIG_HD6446X_SERIES is not set -CONFIG_HEARTBEAT=y - -# -# Kernel features -# -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_SMP is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set - -# -# Boot options -# -CONFIG_ZERO_PAGE_OFFSET=0x00001000 -CONFIG_BOOT_LINK_OFFSET=0x00210000 -# CONFIG_UBC_WAKEUP is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,38400 root=/dev/ram0" - -# -# Bus options -# -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# -# CONFIG_NET is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=2 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_UNIX98_PTYS is not set -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -CONFIG_IPMI_HANDLER=y -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=y -# CONFIG_IPMI_SI is not set -CONFIG_IPMI_WATCHDOG=y -# CONFIG_IPMI_POWEROFF is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=y -# CONFIG_SH_WDT is not set -CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set -CONFIG_SH_STANDARD_BIOS=y -CONFIG_EARLY_PRINTK=y -CONFIG_KGDB=y - -# -# KGDB configuration options -# -# CONFIG_MORE_COMPILE_OPTIONS is not set -# CONFIG_KGDB_NMI is not set -# CONFIG_KGDB_THREAD is not set -# CONFIG_SH_KGDB_CONSOLE is not set -# CONFIG_KGDB_SYSRQ is not set -# CONFIG_KGDB_KERNEL_ASSERTS is not set - -# -# Serial port setup -# -CONFIG_KGDB_DEFPORT=1 -CONFIG_KGDB_DEFBAUD=115200 -CONFIG_KGDB_DEFPARITY_N=y -# CONFIG_KGDB_DEFPARITY_E is not set -# CONFIG_KGDB_DEFPARITY_O is not set -CONFIG_KGDB_DEFBITS_8=y -# CONFIG_KGDB_DEFBITS_7 is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 98e84f40c713..5da325414880 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -8,7 +8,7 @@ * * Supported system: * On-chip supporting modules (TMU, RTC, etc.). - * On-chip supporting modules for SH7709/SH7709A/SH7729/SH7300. + * On-chip supporting modules for SH7709/SH7709A/SH7729. * Hitachi SolutionEngine external I/O: * MS7709SE01, MS7709ASE01, and MS7750SE01 * diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 09faa056cd43..55b750763f66 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -10,16 +10,14 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh7709.o obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o -obj-$(CONFIG_CPU_SUBTYPE_SH7300) += setup-sh7300.o obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o -clock-$(CONFIG_CPU_SUBTYPE_SH7300) := clock-sh7300.o clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o -clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7300.o +clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7300.c b/arch/sh/kernel/cpu/sh3/clock-sh7710.c index e804174b9625..4744c50ec449 100644 --- a/arch/sh/kernel/cpu/sh3/clock-sh7300.c +++ b/arch/sh/kernel/cpu/sh3/clock-sh7710.c @@ -1,7 +1,7 @@ /* - * arch/sh/kernel/cpu/sh3/clock-sh7300.c + * arch/sh/kernel/cpu/sh3/clock-sh7710.c * - * SH7300 support for the clock framework + * SH7710 support for the clock framework * * Copyright (C) 2005 Paul Mundt * @@ -29,7 +29,7 @@ static void master_clk_init(struct clk *clk) clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007]; } -static struct clk_ops sh7300_master_clk_ops = { +static struct clk_ops sh7710_master_clk_ops = { .init = master_clk_init, }; @@ -39,7 +39,7 @@ static void module_clk_recalc(struct clk *clk) clk->rate = clk->parent->rate / md_table[idx]; } -static struct clk_ops sh7300_module_clk_ops = { +static struct clk_ops sh7710_module_clk_ops = { .recalc = module_clk_recalc, }; @@ -49,7 +49,7 @@ static void bus_clk_recalc(struct clk *clk) clk->rate = clk->parent->rate / md_table[idx]; } -static struct clk_ops sh7300_bus_clk_ops = { +static struct clk_ops sh7710_bus_clk_ops = { .recalc = bus_clk_recalc, }; @@ -59,20 +59,20 @@ static void cpu_clk_recalc(struct clk *clk) clk->rate = clk->parent->rate / md_table[idx]; } -static struct clk_ops sh7300_cpu_clk_ops = { +static struct clk_ops sh7710_cpu_clk_ops = { .recalc = cpu_clk_recalc, }; -static struct clk_ops *sh7300_clk_ops[] = { - &sh7300_master_clk_ops, - &sh7300_module_clk_ops, - &sh7300_bus_clk_ops, - &sh7300_cpu_clk_ops, +static struct clk_ops *sh7710_clk_ops[] = { + &sh7710_master_clk_ops, + &sh7710_module_clk_ops, + &sh7710_bus_clk_ops, + &sh7710_cpu_clk_ops, }; void __init arch_init_clk_ops(struct clk_ops **ops, int idx) { - if (idx < ARRAY_SIZE(sh7300_clk_ops)) - *ops = sh7300_clk_ops[idx]; + if (idx < ARRAY_SIZE(sh7710_clk_ops)) + *ops = sh7710_clk_ops[idx]; } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7300.c b/arch/sh/kernel/cpu/sh3/setup-sh7300.c deleted file mode 100644 index ab4d204bfba5..000000000000 --- a/arch/sh/kernel/cpu/sh3/setup-sh7300.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * SH7300 Setup - * - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial.h> -#include <asm/sci.h> - -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xa4430000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, - .irqs = { 80, 80, 80, 80 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - -static struct platform_device *sh7300_devices[] __initdata = { - &sci_device, -}; - -static int __init sh7300_devices_setup(void) -{ - return platform_add_devices(sh7300_devices, - ARRAY_SIZE(sh7300_devices)); -} -__initcall(sh7300_devices_setup); diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index af766b6cd3c1..2cf7dec0d690 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -276,7 +276,6 @@ void __init setup_arch(char **cmdline_p) static const char *cpu_name[] = { [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", - [CPU_SH7300] = "SH7300", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 7aca37d79766..8a545d54e2d3 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -173,8 +173,7 @@ static int tmu_timer_init(void) tmu_timer_stop(); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ +#if !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ !defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index ff67422c8dcb..43f3972a5fb9 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -63,10 +63,6 @@ config CPU_SUBTYPE_SH7206 # SH-3 Processor Support -config CPU_SUBTYPE_SH7300 - bool "Support SH7300 processor" - select CPU_SH3 - config CPU_SUBTYPE_SH7705 bool "Support SH7705 processor" select CPU_SH3 diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 21d18351af7f..439bfe3d29af 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -8,7 +8,6 @@ SE SH_SOLUTION_ENGINE 7751SE SH_7751_SOLUTION_ENGINE 7722SE SH_7722_SOLUTION_ENGINE -7300SE SH_7300_SOLUTION_ENGINE 7343SE SH_7343_SOLUTION_ENGINE 7206SE SH_7206_SOLUTION_ENGINE 7619SE SH_7619_SOLUTION_ENGINE diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 672cd1042539..053fca41b08a 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -12,6 +12,7 @@ * Modified to support multiple serial ports. Stuart Menefy (May 2000). * Modified to support SecureEdge. David McCullough (2002) * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). + * Removed SH7300 support (Jul 2007). * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -289,13 +290,7 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) #endif #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) -#if defined(CONFIG_CPU_SUBTYPE_SH7300) -/* SH7300 doesn't use RTS/CTS */ -static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) -{ - sci_out(port, SCFCR, 0); -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag) { unsigned int fcr_val = 0; diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index b11127d0edab..cf75466ebf57 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -9,6 +9,7 @@ * Modified to support multiple serial ports. Stuart Menefy (May 2000). * Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003). * Modified to support H8/300 Series Yoshinori Sato (Feb 2004). + * Removed SH7300 support (Jul 2007). */ #include <linux/serial_core.h> #include <asm/io.h> @@ -70,11 +71,6 @@ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_SH7300) -# define SCPCR 0xA4050116 /* 16 bit SCIF */ -# define SCPDR 0xA4050136 /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ # define SCI_NPORTS 2 @@ -221,7 +217,7 @@ #define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ #define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) #define SCIF_ORER 0x0200 #define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) #define SCIF_RFDC_MASK 0x007f @@ -250,7 +246,7 @@ # define SCxSR_ERRORS(port) SCIF_ERRORS # define SCxSR_RDxF(port) SCIF_RDF # define SCxSR_TDxE(port) SCIF_TDFE -#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) # define SCxSR_ORER(port) SCIF_ORER #else # define SCxSR_ORER(port) 0x0000 @@ -258,13 +254,13 @@ # define SCxSR_FER(port) SCIF_FER # define SCxSR_PER(port) SCIF_PER # define SCxSR_BRK(port) SCIF_BRK -#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) # define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc) # define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73) # define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf) # define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3) #else -/* SH7705 can also use this, clearing is same between 7705 and 7709 and 7300 */ +/* SH7705 can also use this, clearing is same between 7705 and 7709 */ # define SCxSR_RDxF_CLEAR(port) 0x00fc # define SCxSR_ERROR_CLEAR(port) 0x0073 # define SCxSR_TDxE_CLEAR(port) 0x00df @@ -366,8 +362,7 @@ CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \ - defined(CONFIG_CPU_SUBTYPE_SH7705) +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) #define SCIF_FNS(name, scif_offset, scif_size) \ CPU_SCIF_FNS(name, scif_offset, scif_size) #else @@ -393,8 +388,7 @@ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) #endif -#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \ - defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) @@ -547,13 +541,6 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } -#elif defined(CONFIG_CPU_SUBTYPE_SH7300) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xa4430000) - return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */ - return 1; -} #elif defined(CONFIG_CPU_SUBTYPE_SH7343) static inline int sci_rxd_in(struct uart_port *port) { @@ -701,8 +688,7 @@ static inline int sci_rxd_in(struct uart_port *port) * -- Mitch Davis - 15 Jul 2000 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ +#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index d5d7a16cbfe0..b66139ff73fc 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -29,7 +29,7 @@ static void __init check_bugs(void) *p++ = '2'; *p++ = 'a'; break; - case CPU_SH7705 ... CPU_SH7300: + case CPU_SH7705 ... CPU_SH7729: *p++ = '3'; break; case CPU_SH7750 ... CPU_SH4_501: diff --git a/include/asm-sh/cpu-sh3/freq.h b/include/asm-sh/cpu-sh3/freq.h index 273f3229785c..0a054b53b9de 100644 --- a/include/asm-sh/cpu-sh3/freq.h +++ b/include/asm-sh/cpu-sh3/freq.h @@ -10,11 +10,7 @@ #ifndef __ASM_CPU_SH3_FREQ_H #define __ASM_CPU_SH3_FREQ_H -#if defined(CONFIG_CPU_SUBTYPE_SH7300) -#define FRQCR 0xa415ff80 -#else #define FRQCR 0xffffff80 -#endif #define MIN_DIVISOR_NR 0 #define MAX_DIVISOR_NR 4 diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h index 4704e86dff5b..b20786d42d09 100644 --- a/include/asm-sh/cpu-sh3/mmu_context.h +++ b/include/asm-sh/cpu-sh3/mmu_context.h @@ -30,7 +30,6 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) || \ defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || \ defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7712) || \ defined(CONFIG_CPU_SUBTYPE_SH7710) diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h index 4928b08f9d19..b6c2020a2ad3 100644 --- a/include/asm-sh/cpu-sh3/timer.h +++ b/include/asm-sh/cpu-sh3/timer.h @@ -19,7 +19,6 @@ * SH7729R * SH7710 * SH7720 - * SH7300 * SH7710 * --------------------------------------------------------------------------- */ @@ -28,7 +27,7 @@ #define TMU_TOCR 0xfffffe90 /* Byte access */ #endif -#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) #define TMU_012_TSTR 0xa412fe92 /* Byte access */ #define TMU0_TCOR 0xa412fe94 /* Long access */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 7969d3a127da..26d52174f4b4 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -45,7 +45,7 @@ enum cpu_type { CPU_SH7705, CPU_SH7706, CPU_SH7707, CPU_SH7708, CPU_SH7708S, CPU_SH7708R, CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712, - CPU_SH7729, CPU_SH7300, + CPU_SH7729, /* SH-4 types */ CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, diff --git a/include/asm-sh/se7300.h b/include/asm-sh/se7300.h deleted file mode 100644 index 4e24edccb30d..000000000000 --- a/include/asm-sh/se7300.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __ASM_SH_HITACHI_SE7300_H -#define __ASM_SH_HITACHI_SE7300_H - -/* - * linux/include/asm-sh/se/se7300.h - * - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * - * SH-Mobile SolutionEngine 7300 support - */ - -/* Box specific addresses. */ - -/* Area 0 */ -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */ -#define PA_FROM 0x00400000 /* Flash ROM */ -#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */ -#define PA_SRAM 0x00800000 /* SRAM */ -#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */ -/* Area 1 */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -/* Area 2 */ -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -/* Area 3 */ -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 -/* Area 4 */ -#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */ -#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) -#define PA_LED 0xb0800000 /* LED */ -#define PA_DIPSW 0xb0900000 /* Dip switch 31 */ -#define PA_EPLD_MODESET 0xb0a00000 /* FPGA Mode set register */ -#define PA_EPLD_ST1 0xb0a80000 /* FPGA Interrupt status register1 */ -#define PA_EPLD_ST2 0xb0ac0000 /* FPGA Interrupt status register2 */ -/* Area 5 */ -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -/* Area 6 */ -#define PA_LCD1 0xb8000000 -#define PA_LCD2 0xb8800000 - -#define __IO_PREFIX sh7300se -#include <asm/io_generic.h> - -#endif /* __ASM_SH_HITACHI_SE7300_H */ diff --git a/include/asm-sh/ubc.h b/include/asm-sh/ubc.h index 38d46e01b846..56f4e30dc49c 100644 --- a/include/asm-sh/ubc.h +++ b/include/asm-sh/ubc.h @@ -15,8 +15,7 @@ #include <asm/cpu/ubc.h> /* User Break Controller */ -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) #define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729) #else #define UBC_TYPE_SH7729 0 |