diff options
23 files changed, 75 insertions, 34 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt index f2455c50533d..120bc4971cf3 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -11,6 +11,10 @@ Required properties: 0 = active high 1 = active low +Optional properties: +- little-endian : GPIO registers are used as little endian. If not + present registers are used as big endian by default. + Example: gpio0: gpio@1100 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d83ff9c9701e..de8791a4d131 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -74,7 +74,7 @@ reg = <0x48240200 0x100>; interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&dpll_mpu_m2_ck>; + clocks = <&mpu_periphclk>; }; local_timer: timer@48240600 { @@ -82,7 +82,7 @@ reg = <0x48240600 0x100>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&dpll_mpu_m2_ck>; + clocks = <&mpu_periphclk>; }; l2-cache-controller@48242000 { diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index cc88728d751d..a38af2bfbfcf 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -259,6 +259,14 @@ ti,invert-autoidle-bit; }; + mpu_periphclk: mpu_periphclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_mpu_m2_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + dpll_ddr_ck: dpll_ddr_ck { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index ad6de73ed5a5..e74df327cdd3 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -184,6 +184,7 @@ regulator-name = "VDD_SDHC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 8ea177f375dd..fb1da99996ea 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -118,7 +118,8 @@ sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; - clocks = <&chip_clk CLKID_SDIO1XIN>; + clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; + clock-names = "io", "core"; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -126,7 +127,8 @@ sdhci1: sdhci@ab0800 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0800 0x200>; - clocks = <&chip_clk CLKID_SDIO1XIN>; + clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; + clock-names = "io", "core"; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -135,7 +137,7 @@ compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>; + clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>; clock-names = "io", "core"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 3c99cfa1a876..eee636de4cd8 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -218,6 +218,7 @@ reg = <0x480c8000 0x2000>; interrupts = <77>; ti,hwmods = "mailbox"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; mbox_dsp: mbox_dsp { @@ -279,8 +280,11 @@ ti,spi-num-cs = <4>; ti,hwmods = "mcspi1"; dmas = <&edma 16 &edma 17 - &edma 18 &edma 19>; - dma-names = "tx0", "rx0", "tx1", "rx1"; + &edma 18 &edma 19 + &edma 20 &edma 21 + &edma 22 &edma 23>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; }; mmc1: mmc@48060000 { diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 2d4250b1faf8..68b479b8772c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -83,6 +83,7 @@ reg = <0x5d>; interrupt-parent = <&pio>; interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ + touchscreen-swapped-x-y; }; }; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 19fe045b8334..2d7eab755210 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -18,8 +18,3 @@ reg = <0x80000000 0x10000000>; }; }; - -&L2 { - arm,data-latency = <2 1 2>; - arm,tag-latency = <3 2 3>; -}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 5f8eb1bd782b..58bc6e448be5 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -19,7 +19,7 @@ reg = <0x40006000 0x1000>; cache-unified; cache-level = <2>; - arm,data-latency = <1 1 1>; + arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; }; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 0d5acc2cdc8e..3cd1b27f2697 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -178,8 +178,10 @@ compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_SAI2>; - clock-names = "sai"; + clocks = <&clks VF610_CLK_SAI2>, + <&clks VF610_CLK_SAI2_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 0 21>, <&edma0 0 20>; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 92673006e55c..28656c2b54a0 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -4,7 +4,6 @@ menuconfig ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select COMMON_CLK_AT91 select PINCTRL - select PINCTRL_AT91 select SOC_BUS if ARCH_AT91 @@ -17,6 +16,7 @@ config SOC_SAMA5D2 select HAVE_AT91_USB_CLK select HAVE_AT91_H32MX select HAVE_AT91_GENERATED_CLK + select PINCTRL_AT91PIO4 help Select this if ou are using one of Atmel's SAMA5D2 family SoC. @@ -27,6 +27,7 @@ config SOC_SAMA5D3 select HAVE_AT91_UTMI select HAVE_AT91_SMD select HAVE_AT91_USB_CLK + select PINCTRL_AT91 help Select this if you are using one of Atmel's SAMA5D3 family SoC. This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36. @@ -40,6 +41,7 @@ config SOC_SAMA5D4 select HAVE_AT91_SMD select HAVE_AT91_USB_CLK select HAVE_AT91_H32MX + select PINCTRL_AT91 help Select this if you are using one of Atmel's SAMA5D4 family SoC. @@ -50,6 +52,7 @@ config SOC_AT91RM9200 select CPU_ARM920T select HAVE_AT91_USB_CLK select MIGHT_HAVE_PCI + select PINCTRL_AT91 select SOC_SAM_V4_V5 select SRAM if PM help @@ -65,6 +68,7 @@ config SOC_AT91SAM9 select HAVE_AT91_UTMI select HAVE_FB_ATMEL select MEMORY + select PINCTRL_AT91 select SOC_SAM_V4_V5 select SRAM if PM help diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 80e277cfcc8b..23726fb31741 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -41,8 +41,10 @@ * implementation should be moved down into the pinctrl driver and get * called as part of the generic suspend/resume path. */ +#ifdef CONFIG_PINCTRL_AT91 extern void at91_pinctrl_gpio_suspend(void); extern void at91_pinctrl_gpio_resume(void); +#endif static struct { unsigned long uhp_udp_mask; @@ -151,8 +153,9 @@ static void at91_pm_suspend(suspend_state_t state) static int at91_pm_enter(suspend_state_t state) { +#ifdef CONFIG_PINCTRL_AT91 at91_pinctrl_gpio_suspend(); - +#endif switch (state) { /* * Suspend-to-RAM is like STANDBY plus slow clock mode, so @@ -192,7 +195,9 @@ static int at91_pm_enter(suspend_state_t state) error: target_state = PM_SUSPEND_ON; +#ifdef CONFIG_PINCTRL_AT91 at91_pinctrl_gpio_resume(); +#endif return 0; } diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index de68938ee6aa..c21e41dad19c 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -748,8 +748,12 @@ static void exynos5_powerdown_conf(enum sys_powerdown mode) void exynos_sys_powerdown_conf(enum sys_powerdown mode) { unsigned int i; + const struct exynos_pmu_data *pmu_data; + + if (!pmu_context) + return; - const struct exynos_pmu_data *pmu_data = pmu_context->pmu_data; + pmu_data = pmu_context->pmu_data; if (pmu_data->powerdown_conf) pmu_data->powerdown_conf(mode); diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index b02439019963..7a0c13bf4269 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -143,7 +143,7 @@ static inline void __indirect_writesl(volatile void __iomem *bus_addr, writel(*vaddr++, bus_addr); } -static inline unsigned char __indirect_readb(const volatile void __iomem *p) +static inline u8 __indirect_readb(const volatile void __iomem *p) { u32 addr = (u32)p; u32 n, byte_enables, data; @@ -166,7 +166,7 @@ static inline void __indirect_readsb(const volatile void __iomem *bus_addr, *vaddr++ = readb(bus_addr); } -static inline unsigned short __indirect_readw(const volatile void __iomem *p) +static inline u16 __indirect_readw(const volatile void __iomem *p) { u32 addr = (u32)p; u32 n, byte_enables, data; @@ -189,7 +189,7 @@ static inline void __indirect_readsw(const volatile void __iomem *bus_addr, *vaddr++ = readw(bus_addr); } -static inline unsigned long __indirect_readl(const volatile void __iomem *p) +static inline u32 __indirect_readl(const volatile void __iomem *p) { u32 addr = (__force u32)p; u32 data; @@ -350,7 +350,7 @@ static inline void insl(u32 io_addr, void *p, u32 count) ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) #define ioread8(p) ioread8(p) -static inline unsigned int ioread8(const void __iomem *addr) +static inline u8 ioread8(const void __iomem *addr) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) @@ -378,7 +378,7 @@ static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) } #define ioread16(p) ioread16(p) -static inline unsigned int ioread16(const void __iomem *addr) +static inline u16 ioread16(const void __iomem *addr) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) @@ -407,7 +407,7 @@ static inline void ioread16_rep(const void __iomem *addr, void *vaddr, } #define ioread32(p) ioread32(p) -static inline unsigned int ioread32(const void __iomem *addr) +static inline u32 ioread32(const void __iomem *addr) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5076d3f334d2..4b4371db5799 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -121,6 +121,7 @@ config ARCH_OMAP2PLUS_TYPICAL select NEON if CPU_V7 select PM select REGULATOR + select REGULATOR_FIXED_VOLTAGE select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 select VFP @@ -201,7 +202,6 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_NOKIA_N810 bool diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 3db3231e8dc7..23b010480e83 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -889,6 +889,7 @@ static void __init e680_init(void) pxa_set_keypad_info(&e680_keypad_platform_data); + pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(e680_devices)); } @@ -956,6 +957,7 @@ static void __init a1200_init(void) pxa_set_keypad_info(&a1200_keypad_platform_data); + pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a1200_devices)); } @@ -1148,6 +1150,7 @@ static void __init a910_init(void) platform_device_register(&a910_camera); } + pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a910_devices)); } @@ -1215,6 +1218,7 @@ static void __init e6_init(void) pxa_set_keypad_info(&e6_keypad_platform_data); + pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(e6_devices)); } @@ -1256,6 +1260,7 @@ static void __init e2_init(void) pxa_set_keypad_info(&e2_keypad_platform_data); + pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(e2_devices)); } diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c index a19460e6e7b0..b355fca6cc2e 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c @@ -20,7 +20,7 @@ #include <plat/cpu.h> #include <plat/cpu-freq-core.h> -static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { +static struct cpufreq_frequency_table s3c2440_plls_12[] = { { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ { .frequency = 90000000, .driver_data = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */ diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c index 1191b2905625..be9a248b5ce9 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c @@ -20,7 +20,7 @@ #include <plat/cpu.h> #include <plat/cpu-freq-core.h> -static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { +static struct cpufreq_frequency_table s3c2440_plls_169344[] = { { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ { .frequency = 90115200, .driver_data = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index e81cd48d6245..925552e7b4f3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -269,6 +269,7 @@ clock-frequency = <0>; /* Updated by bootloader */ voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; + little-endian; bus-width = <4>; }; @@ -277,6 +278,7 @@ reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <0 36 0x4>; /* Level high type */ gpio-controller; + little-endian; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -287,6 +289,7 @@ reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <0 36 0x4>; /* Level high type */ gpio-controller; + little-endian; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -297,6 +300,7 @@ reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <0 37 0x4>; /* Level high type */ gpio-controller; + little-endian; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -307,6 +311,7 @@ reg = <0x0 0x2330000 0x0 0x10000>; interrupts = <0 37 0x4>; /* Level high type */ gpio-controller; + little-endian; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index 846bc29c157d..0cfcb39c53f4 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -342,13 +342,13 @@ static int sunxi_rsb_read(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr, ret = _sunxi_rsb_run_xfer(rsb); if (ret) - goto out; + goto unlock; *buf = readl(rsb->regs + RSB_DATA); +unlock: mutex_unlock(&rsb->lock); -out: return ret; } diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c index d1b1c95177bb..0a94d9661d91 100644 --- a/drivers/clk/imx/clk-vf610.c +++ b/drivers/clk/imx/clk-vf610.c @@ -335,22 +335,22 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4); clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16); clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4); - clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15)); + clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(15)); clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4); clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17); clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4); - clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0)); + clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(0)); clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4); clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18); clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4); - clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1)); + clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(1)); clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4); clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19); clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4); - clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2)); + clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(2)); clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4); clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9); diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index 733aa5153e74..68ef8fd9482f 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -648,7 +648,7 @@ late_initcall(s3c_cpufreq_initcall); * * Register the given set of PLLs with the system. */ -int __init s3c_plltab_register(struct cpufreq_frequency_table *plls, +int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no) { struct cpufreq_frequency_table *vals; diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c index e87459f6d686..acd1460cf787 100644 --- a/drivers/memory/fsl_ifc.c +++ b/drivers/memory/fsl_ifc.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/compiler.h> +#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/types.h> #include <linux/slab.h> |