diff options
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/regs-serial.h | 8 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/s3c24a0.c | 118 | ||||
| -rw-r--r-- | drivers/serial/samsung.c | 2 |
5 files changed, 134 insertions, 2 deletions
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h index a0daa647b92c..18ba31c7174c 100644 --- a/arch/arm/plat-s3c/include/plat/regs-serial.h +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -149,6 +149,14 @@ #define S3C2410_UFSTAT_RXMASK (15<<0) #define S3C2410_UFSTAT_RXSHIFT (0) +/* UFSTAT S3C24A0 */ +#define S3C24A0_UFSTAT_TXFULL (1 << 14) +#define S3C24A0_UFSTAT_RXFULL (1 << 6) +#define S3C24A0_UFSTAT_TXMASK (63 << 8) +#define S3C24A0_UFSTAT_TXSHIFT (8) +#define S3C24A0_UFSTAT_RXMASK (63) +#define S3C24A0_UFSTAT_RXSHIFT (0) + /* UFSTAT S3C2443 same as S3C2440 */ #define S3C2440_UFSTAT_TXFULL (1<<14) #define S3C2440_UFSTAT_RXFULL (1<<6) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 579d63a81aa2..f71a2e8a5f60 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -508,7 +508,12 @@ config SERIAL_S3C2440 help Serial port support for the Samsung S3C2440 and S3C2442 SoC - +config SERIAL_S3C24A0 + tristate "Samsung S3C24A0 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S3C24A0 + default y if CPU_S3C24A0 + help + Serial port support for the Samsung S3C24A0 SoC config SERIAL_DZ bool "DECstation DZ serial driver" diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 0c17c8ddb19d..7769aece54ca 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o +obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c new file mode 100644 index 000000000000..ebf2fd3c8f7d --- /dev/null +++ b/drivers/serial/s3c24a0.c @@ -0,0 +1,118 @@ +/* linux/drivers/serial/s3c24a0.c + * + * Driver for Samsung S3C24A0 SoC onboard UARTs. + * + * Based on drivers/serial/s3c2410.c + * + * Author: Sandeep Patil <sandeep.patil@azingo.com> + * + * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/io.h> +#include <linux/irq.h> + +#include <mach/hardware.h> + +#include <plat/regs-serial.h> +#include <mach/regs-gpio.h> + +#include "samsung.h" + +static int s3c24a0_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2410_UCON_UCLK; + else + ucon &= ~S3C2410_UCON_UCLK; + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + +static int s3c24a0_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; + + return 0; +} + +static int s3c24a0_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c24a0_uart_inf = { + .name = "Samsung S3C24A0 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C24A0_UFSTAT_RXMASK, + .rx_fifoshift = S3C24A0_UFSTAT_RXSHIFT, + .rx_fifofull = S3C24A0_UFSTAT_RXFULL, + .tx_fifofull = S3C24A0_UFSTAT_TXFULL, + .tx_fifomask = S3C24A0_UFSTAT_TXMASK, + .tx_fifoshift = S3C24A0_UFSTAT_TXSHIFT, + .get_clksrc = s3c24a0_serial_getsource, + .set_clksrc = s3c24a0_serial_setsource, + .reset_port = s3c24a0_serial_resetport, +}; + +static int s3c24a0_serial_probe(struct platform_device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf); +} + +static struct platform_driver s3c24a0_serial_drv = { + .probe = s3c24a0_serial_probe, + .remove = s3c24xx_serial_remove, + .driver = { + .name = "s3c24a0-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf); + +static int __init s3c24a0_serial_init(void) +{ + return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf); +} + +static void __exit s3c24a0_serial_exit(void) +{ + platform_driver_unregister(&s3c24a0_serial_drv); +} + +module_init(s3c24a0_serial_init); +module_exit(s3c24a0_serial_exit); + diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index ebeda832c8a3..bb8b57aae3af 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -61,7 +61,7 @@ /* we can support 3 uarts, but not always use them */ -#ifdef CONFIG_CPU_S3C2400 +#if defined(CONFIG_CPU_S3C2400) || defined(CONFIG_CPU_S3C24A0) #define NR_PORTS (2) #else #define NR_PORTS (3) |