diff options
| -rw-r--r-- | drivers/scsi/lpfc/lpfc.h | 29 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 5 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_crtn.h | 4 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_hw4.h | 32 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 188 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 110 |
6 files changed, 363 insertions, 5 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 169cef789f73..5a356a1d517c 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -114,6 +114,12 @@ struct lpfc_sli2_slim; #define LPFC_MBX_NO_WAIT 0 #define LPFC_MBX_WAIT 1 +#define LPFC_CFG_PARAM_MAGIC_NUM 0xFEAA0005 +#define LPFC_PORT_CFG_NAME "/cfg/port.cfg" + +#define lpfc_rangecheck(val, min, max) \ + ((uint)(val) >= (uint)(min) && (val) <= (max)) + enum lpfc_polling_flags { ENABLE_FCP_RING_POLLING = 0x1, DISABLE_FCP_RING_INT = 0x2 @@ -403,6 +409,26 @@ struct lpfc_trunk_link { link3; }; +/* Format of congestion module parameters */ +struct lpfc_cgn_param { + uint32_t cgn_param_magic; + uint8_t cgn_param_version; /* version 1 */ + uint8_t cgn_param_mode; /* 0=off 1=managed 2=monitor only */ +#define LPFC_CFG_OFF 0 +#define LPFC_CFG_MANAGED 1 +#define LPFC_CFG_MONITOR 2 + uint8_t cgn_rsvd1; + uint8_t cgn_rsvd2; + uint8_t cgn_param_level0; + uint8_t cgn_param_level1; + uint8_t cgn_param_level2; + uint8_t byte11; + uint8_t byte12; + uint8_t byte13; + uint8_t byte14; + uint8_t byte15; +}; + /* Max number of days of congestion data */ #define LPFC_MAX_CGN_DAYS 10 @@ -1491,6 +1517,9 @@ struct lpfc_hba { u32 cgn_sig_freq; u32 cgn_acqe_cnt; + /* Congestion parameters from flash */ + struct lpfc_cgn_param cgn_p; + /* Statistics counter for ACQE cgn alarms and warnings */ struct lpfc_cgn_acqe_stat cgn_acqe_stat; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index d16d3544084f..449409cad60d 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -2248,11 +2248,6 @@ lpfc_sriov_hw_max_virtfn_show(struct device *dev, return scnprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn); } -static inline bool lpfc_rangecheck(uint val, uint min, uint max) -{ - return val >= min && val <= max; -} - /** * lpfc_enable_bbcr_set: Sets an attribute value. * @phba: pointer the the adapter structure. diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index e7fad8cd10ee..947c4ba847f6 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -77,6 +77,7 @@ int lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hrq, struct lpfc_queue *drq, int count, int idx); void lpfc_init_congestion_stat(struct lpfc_hba *phba); void lpfc_init_congestion_buf(struct lpfc_hba *phba); +int lpfc_sli4_cgn_params_read(struct lpfc_hba *phba); int lpfc_config_cgn_signal(struct lpfc_hba *phba); void lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -220,6 +221,9 @@ irqreturn_t lpfc_sli_fp_intr_handler(int, void *); irqreturn_t lpfc_sli4_intr_handler(int, void *); irqreturn_t lpfc_sli4_hba_intr_handler(int, void *); +int lpfc_read_object(struct lpfc_hba *phba, char *s, uint32_t *datap, + uint32_t len); + void lpfc_sli4_cleanup_poll_list(struct lpfc_hba *phba); int lpfc_sli4_poll_eq(struct lpfc_queue *q, uint8_t path); void lpfc_sli4_poll_hbtimer(struct timer_list *t); diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 3e81d02fb24f..973af1f86d28 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1134,6 +1134,12 @@ struct lpfc_mbx_sge { uint32_t length; }; +struct lpfc_mbx_host_buf { + uint32_t length; + uint32_t pa_lo; + uint32_t pa_hi; +}; + struct lpfc_mbx_nembed_cmd { struct lpfc_sli4_cfg_mhdr cfg_mhdr; #define LPFC_SLI4_MBX_SGE_MAX_PAGES 19 @@ -1144,6 +1150,30 @@ struct lpfc_mbx_nembed_sge_virt { void *addr[LPFC_SLI4_MBX_SGE_MAX_PAGES]; }; +struct lpfc_mbx_read_object { /* Version 0 */ + struct mbox_header header; + union { + struct { + uint32_t word0; +#define lpfc_mbx_rd_object_rlen_SHIFT 0 +#define lpfc_mbx_rd_object_rlen_MASK 0x00FFFFFF +#define lpfc_mbx_rd_object_rlen_WORD word0 + uint32_t rd_object_offset; + uint32_t rd_object_name[26]; +#define LPFC_OBJ_NAME_SZ 104 /* 26 x sizeof(uint32_t) is 104. */ + uint32_t rd_object_cnt; + struct lpfc_mbx_host_buf rd_object_hbuf[4]; + } request; + struct { + uint32_t rd_object_actual_rlen; + uint32_t word1; +#define lpfc_mbx_rd_object_eof_SHIFT 31 +#define lpfc_mbx_rd_object_eof_MASK 0x1 +#define lpfc_mbx_rd_object_eof_WORD word1 + } response; + } u; +}; + struct lpfc_mbx_eq_create { struct mbox_header header; union { @@ -2339,6 +2369,7 @@ struct lpfc_mbx_redisc_fcf_tbl { #define ADD_STATUS_OPERATION_ALREADY_ACTIVE 0x67 #define ADD_STATUS_FW_NOT_SUPPORTED 0xEB #define ADD_STATUS_INVALID_REQUEST 0x4B +#define ADD_STATUS_INVALID_OBJECT_NAME 0xA0 #define ADD_STATUS_FW_DOWNLOAD_HW_DISABLED 0x58 struct lpfc_mbx_sli4_config { @@ -3893,6 +3924,7 @@ struct lpfc_mqe { struct lpfc_mbx_unreg_fcfi unreg_fcfi; struct lpfc_mbx_mq_create mq_create; struct lpfc_mbx_mq_create_ext mq_create_ext; + struct lpfc_mbx_read_object read_object; struct lpfc_mbx_eq_create eq_create; struct lpfc_mbx_modify_eq_delay eq_delay; struct lpfc_mbx_cq_create cq_create; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 71166c24ae89..a34f667e1cd0 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -6114,6 +6114,194 @@ lpfc_sli4_async_grp5_evt(struct lpfc_hba *phba, } /** + * lpfc_cgn_params_val - Validate FW congestion parameters. + * @phba: pointer to lpfc hba data structure. + * @p_cfg_param: pointer to FW provided congestion parameters. + * + * This routine validates the congestion parameters passed + * by the FW to the driver via an ACQE event. + **/ +static void +lpfc_cgn_params_val(struct lpfc_hba *phba, struct lpfc_cgn_param *p_cfg_param) +{ + spin_lock_irq(&phba->hbalock); + + if (!lpfc_rangecheck(p_cfg_param->cgn_param_mode, LPFC_CFG_OFF, + LPFC_CFG_MONITOR)) { + lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT, + "6225 CMF mode param out of range: %d\n", + p_cfg_param->cgn_param_mode); + p_cfg_param->cgn_param_mode = LPFC_CFG_OFF; + } + + spin_unlock_irq(&phba->hbalock); +} + +/** + * lpfc_cgn_params_parse - Process a FW cong parm change event + * @phba: pointer to lpfc hba data structure. + * @p_cgn_param: pointer to a data buffer with the FW cong params. + * @len: the size of pdata in bytes. + * + * This routine validates the congestion management buffer signature + * from the FW, validates the contents and makes corrections for + * valid, in-range values. If the signature magic is correct and + * after parameter validation, the contents are copied to the driver's + * @phba structure. If the magic is incorrect, an error message is + * logged. + **/ +static void +lpfc_cgn_params_parse(struct lpfc_hba *phba, + struct lpfc_cgn_param *p_cgn_param, uint32_t len) +{ + uint32_t oldmode; + + /* Make sure the FW has encoded the correct magic number to + * validate the congestion parameter in FW memory. + */ + if (p_cgn_param->cgn_param_magic == LPFC_CFG_PARAM_MAGIC_NUM) { + lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT | LOG_INIT, + "4668 FW cgn parm buffer data: " + "magic 0x%x version %d mode %d " + "level0 %d level1 %d " + "level2 %d byte13 %d " + "byte14 %d byte15 %d " + "byte11 %d byte12 %d activeMode %d\n", + p_cgn_param->cgn_param_magic, + p_cgn_param->cgn_param_version, + p_cgn_param->cgn_param_mode, + p_cgn_param->cgn_param_level0, + p_cgn_param->cgn_param_level1, + p_cgn_param->cgn_param_level2, + p_cgn_param->byte13, + p_cgn_param->byte14, + p_cgn_param->byte15, + p_cgn_param->byte11, + p_cgn_param->byte12, + phba->cmf_active_mode); + + oldmode = phba->cmf_active_mode; + + /* Any parameters out of range are corrected to defaults + * by this routine. No need to fail. + */ + lpfc_cgn_params_val(phba, p_cgn_param); + + /* Parameters are verified, move them into driver storage */ + spin_lock_irq(&phba->hbalock); + memcpy(&phba->cgn_p, p_cgn_param, + sizeof(struct lpfc_cgn_param)); + + spin_unlock_irq(&phba->hbalock); + + phba->cmf_active_mode = phba->cgn_p.cgn_param_mode; + + switch (oldmode) { + case LPFC_CFG_OFF: + if (phba->cgn_p.cgn_param_mode != LPFC_CFG_OFF) { + /* Turning CMF on */ + + if (phba->link_state >= LPFC_LINK_UP) { + phba->cgn_reg_fpin = + phba->cgn_init_reg_fpin; + phba->cgn_reg_signal = + phba->cgn_init_reg_signal; + lpfc_issue_els_edc(phba->pport, 0); + } + } + break; + case LPFC_CFG_MANAGED: + switch (phba->cgn_p.cgn_param_mode) { + case LPFC_CFG_OFF: + /* Turning CMF off */ + if (phba->link_state >= LPFC_LINK_UP) + lpfc_issue_els_edc(phba->pport, 0); + break; + case LPFC_CFG_MONITOR: + lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, + "4661 Switch from MANAGED to " + "`MONITOR mode\n"); + break; + } + break; + case LPFC_CFG_MONITOR: + switch (phba->cgn_p.cgn_param_mode) { + case LPFC_CFG_OFF: + /* Turning CMF off */ + if (phba->link_state >= LPFC_LINK_UP) + lpfc_issue_els_edc(phba->pport, 0); + break; + case LPFC_CFG_MANAGED: + lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, + "4662 Switch from MONITOR to " + "MANAGED mode\n"); + break; + } + break; + } + } else { + lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT, + "4669 FW cgn parm buf wrong magic 0x%x " + "version %d\n", p_cgn_param->cgn_param_magic, + p_cgn_param->cgn_param_version); + } +} + +/** + * lpfc_sli4_cgn_params_read - Read and Validate FW congestion parameters. + * @phba: pointer to lpfc hba data structure. + * + * This routine issues a read_object mailbox command to + * get the congestion management parameters from the FW + * parses it and updates the driver maintained values. + * + * Returns + * 0 if the object was empty + * -Eval if an error was encountered + * Count if bytes were read from object + **/ +int +lpfc_sli4_cgn_params_read(struct lpfc_hba *phba) +{ + int ret = 0; + struct lpfc_cgn_param *p_cgn_param = NULL; + u32 *pdata = NULL; + u32 len = 0; + + /* Find out if the FW has a new set of congestion parameters. */ + len = sizeof(struct lpfc_cgn_param); + pdata = kzalloc(len, GFP_KERNEL); + ret = lpfc_read_object(phba, (char *)LPFC_PORT_CFG_NAME, + pdata, len); + + /* 0 means no data. A negative means error. A positive means + * bytes were copied. + */ + if (!ret) { + lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT, + "4670 CGN RD OBJ returns no data\n"); + goto rd_obj_err; + } else if (ret < 0) { + /* Some error. Just exit and return it to the caller.*/ + goto rd_obj_err; + } + + lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT | LOG_INIT, + "6234 READ CGN PARAMS Successful %d\n", len); + + /* Parse data pointer over len and update the phba congestion + * parameters with values passed back. The receive rate values + * may have been altered in FW, but take no action here. + */ + p_cgn_param = (struct lpfc_cgn_param *)pdata; + lpfc_cgn_params_parse(phba, p_cgn_param, len); + + rd_obj_err: + kfree(pdata); + return ret; +} + +/** * lpfc_sli4_async_event_proc - Process all the pending asynchronous event * @phba: pointer to lpfc hba data structure. * diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index e6d03a0cf5c1..b42c2dc49c83 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -21706,6 +21706,116 @@ struct lpfc_io_buf *lpfc_get_io_buf(struct lpfc_hba *phba, } /** + * lpfc_read_object - Retrieve object data from HBA + * @phba: The HBA for which this call is being executed. + * @rdobject: Pathname of object data we want to read. + * @datap: Pointer to where data will be copied to. + * @datasz: size of data area + * + * This routine is limited to object sizes of LPFC_BPL_SIZE (1024) or less. + * The data will be truncated if datasz is not large enough. + * Version 1 is not supported with Embedded mbox cmd, so we must use version 0. + * Returns the actual bytes read from the object. + */ +int +lpfc_read_object(struct lpfc_hba *phba, char *rdobject, uint32_t *datap, + uint32_t datasz) +{ + struct lpfc_mbx_read_object *read_object; + LPFC_MBOXQ_t *mbox; + int rc, length, eof, j, byte_cnt = 0; + uint32_t shdr_status, shdr_add_status; + union lpfc_sli4_cfg_shdr *shdr; + struct lpfc_dmabuf *pcmd; + + /* sanity check on queue memory */ + if (!datap) + return -ENODEV; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + length = (sizeof(struct lpfc_mbx_read_object) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_READ_OBJECT, + length, LPFC_SLI4_MBX_EMBED); + read_object = &mbox->u.mqe.un.read_object; + shdr = (union lpfc_sli4_cfg_shdr *)&read_object->header.cfg_shdr; + + bf_set(lpfc_mbox_hdr_version, &shdr->request, LPFC_Q_CREATE_VERSION_0); + bf_set(lpfc_mbx_rd_object_rlen, &read_object->u.request, datasz); + read_object->u.request.rd_object_offset = 0; + read_object->u.request.rd_object_cnt = 1; + + memset((void *)read_object->u.request.rd_object_name, 0, + LPFC_OBJ_NAME_SZ); + sprintf((uint8_t *)read_object->u.request.rd_object_name, rdobject); + for (j = 0; j < strlen(rdobject); j++) + read_object->u.request.rd_object_name[j] = + cpu_to_le32(read_object->u.request.rd_object_name[j]); + + pcmd = kmalloc(sizeof(*pcmd), GFP_KERNEL); + if (pcmd) + pcmd->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &pcmd->phys); + if (!pcmd || !pcmd->virt) { + kfree(pcmd); + mempool_free(mbox, phba->mbox_mem_pool); + return -ENOMEM; + } + memset((void *)pcmd->virt, 0, LPFC_BPL_SIZE); + read_object->u.request.rd_object_hbuf[0].pa_lo = + putPaddrLow(pcmd->phys); + read_object->u.request.rd_object_hbuf[0].pa_hi = + putPaddrHigh(pcmd->phys); + read_object->u.request.rd_object_hbuf[0].length = LPFC_BPL_SIZE; + + mbox->vport = phba->pport; + mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + mbox->ctx_buf = NULL; + mbox->ctx_ndlp = NULL; + + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + + if (shdr_status == STATUS_FAILED && + shdr_add_status == ADD_STATUS_INVALID_OBJECT_NAME) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_CGN_MGMT, + "4674 No port cfg file in FW.\n"); + byte_cnt = -ENOENT; + } else if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_CGN_MGMT, + "2625 READ_OBJECT mailbox failed with " + "status x%x add_status x%x, mbx status x%x\n", + shdr_status, shdr_add_status, rc); + byte_cnt = -ENXIO; + } else { + /* Success */ + length = read_object->u.response.rd_object_actual_rlen; + eof = bf_get(lpfc_mbx_rd_object_eof, &read_object->u.response); + lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_CGN_MGMT, + "2626 READ_OBJECT Success len %d:%d, EOF %d\n", + length, datasz, eof); + + /* Detect the port config file exists but is empty */ + if (!length && eof) { + byte_cnt = 0; + goto exit; + } + + byte_cnt = length; + lpfc_sli_pcimem_bcopy(pcmd->virt, datap, byte_cnt); + } + + exit: + lpfc_mbuf_free(phba, pcmd->virt, pcmd->phys); + kfree(pcmd); + mempool_free(mbox, phba->mbox_mem_pool); + return byte_cnt; +} + +/** * lpfc_get_sgl_per_hdwq - Get one SGL chunk from hdwq's pool * @phba: The HBA for which this call is being executed. * @lpfc_buf: IO buf structure to append the SGL chunk |