diff options
| -rw-r--r-- | Documentation/kernel-parameters.txt | 5 | ||||
| -rw-r--r-- | drivers/acpi/video.c | 86 | ||||
| -rw-r--r-- | drivers/acpi/video_detect.c | 57 | ||||
| -rw-r--r-- | drivers/gpu/drm/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/gpu/stub/Kconfig | 1 |
5 files changed, 4 insertions, 146 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index cdd2a6e8a3b7..f91fc5a65034 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -199,11 +199,6 @@ and is between 256 and 4096 characters. It is defined in the file unusable. The "log_buf_len" parameter may be useful if you need to capture more output. - acpi_display_output= [HW,ACPI] - acpi_display_output=vendor - acpi_display_output=video - See above. - acpi_irq_balance [HW,ACPI] ACPI will balance active IRQs default in APIC mode diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5cd0228d2daa..81766ebec843 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -33,7 +33,6 @@ #include <linux/input.h> #include <linux/backlight.h> #include <linux/thermal.h> -#include <linux/video_output.h> #include <linux/sort.h> #include <linux/pci.h> #include <linux/pci_ids.h> @@ -172,9 +171,6 @@ struct acpi_video_device_cap { u8 _BQC:1; /* Get current brightness level */ u8 _BCQ:1; /* Some buggy BIOS uses _BCQ instead of _BQC */ u8 _DDC:1; /*Return the EDID for this device */ - u8 _DCS:1; /*Return status of output device */ - u8 _DGS:1; /*Query graphics state */ - u8 _DSS:1; /*Device state set */ }; struct acpi_video_brightness_flags { @@ -202,7 +198,6 @@ struct acpi_video_device { struct acpi_video_device_brightness *brightness; struct backlight_device *backlight; struct thermal_cooling_device *cooling_dev; - struct output_device *output_dev; }; static const char device_decode[][30] = { @@ -226,10 +221,6 @@ static int acpi_video_get_next_level(struct acpi_video_device *device, u32 level_current, u32 event); static int acpi_video_switch_brightness(struct acpi_video_device *device, int event); -static int acpi_video_device_get_state(struct acpi_video_device *device, - unsigned long long *state); -static int acpi_video_output_get(struct output_device *od); -static int acpi_video_device_set_state(struct acpi_video_device *device, int state); /*backlight device sysfs support*/ static int acpi_video_get_brightness(struct backlight_device *bd) @@ -265,30 +256,6 @@ static struct backlight_ops acpi_backlight_ops = { .update_status = acpi_video_set_brightness, }; -/*video output device sysfs support*/ -static int acpi_video_output_get(struct output_device *od) -{ - unsigned long long state; - struct acpi_video_device *vd = - (struct acpi_video_device *)dev_get_drvdata(&od->dev); - acpi_video_device_get_state(vd, &state); - return (int)state; -} - -static int acpi_video_output_set(struct output_device *od) -{ - unsigned long state = od->request_state; - struct acpi_video_device *vd= - (struct acpi_video_device *)dev_get_drvdata(&od->dev); - return acpi_video_device_set_state(vd, state); -} - -static struct output_properties acpi_output_properties = { - .set_state = acpi_video_output_set, - .get_status = acpi_video_output_get, -}; - - /* thermal cooling device callbacks */ static int video_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned long *state) @@ -344,34 +311,6 @@ static struct thermal_cooling_device_ops video_cooling_ops = { Video Management -------------------------------------------------------------------------- */ -/* device */ - -static int -acpi_video_device_get_state(struct acpi_video_device *device, - unsigned long long *state) -{ - int status; - - status = acpi_evaluate_integer(device->dev->handle, "_DCS", NULL, state); - - return status; -} - -static int -acpi_video_device_set_state(struct acpi_video_device *device, int state) -{ - int status; - union acpi_object arg0 = { ACPI_TYPE_INTEGER }; - struct acpi_object_list args = { 1, &arg0 }; - unsigned long long ret; - - - arg0.integer.value = state; - status = acpi_evaluate_integer(device->dev->handle, "_DSS", &args, &ret); - - return status; -} - static int acpi_video_device_lcd_query_levels(struct acpi_video_device *device, union acpi_object **levels) @@ -831,15 +770,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DDC", &h_dummy1))) { device->cap._DDC = 1; } - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DCS", &h_dummy1))) { - device->cap._DCS = 1; - } - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DGS", &h_dummy1))) { - device->cap._DGS = 1; - } - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DSS", &h_dummy1))) { - device->cap._DSS = 1; - } if (acpi_video_backlight_support()) { struct backlight_properties props; @@ -904,21 +834,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) printk(KERN_ERR PREFIX "Create sysfs link\n"); } - - if (acpi_video_display_switch_support()) { - - if (device->cap._DCS && device->cap._DSS) { - static int count; - char *name; - name = kasprintf(GFP_KERNEL, "acpi_video%d", count); - if (!name) - return; - count++; - device->output_dev = video_output_register(name, - NULL, device, &acpi_output_properties); - kfree(name); - } - } } /* @@ -1452,7 +1367,6 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) thermal_cooling_device_unregister(device->cooling_dev); device->cooling_dev = NULL; } - video_output_unregister(device->output_dev); return 0; } diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index b83676126598..42d3d72dae85 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -17,15 +17,14 @@ * capabilities the graphics cards plugged in support. The check for general * video capabilities will be triggered by the first caller of * acpi_video_get_capabilities(NULL); which will happen when the first - * backlight (or display output) switching supporting driver calls: + * backlight switching supporting driver calls: * acpi_video_backlight_support(); * * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) * are available, video.ko should be used to handle the device. * * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi, - * sony_acpi,... can take care about backlight brightness and display output - * switching. + * sony_acpi,... can take care about backlight brightness. * * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) * this file will not be compiled, acpi_video_get_capabilities() and @@ -83,11 +82,6 @@ long acpi_is_video_device(struct acpi_device *device) if (!device) return 0; - /* Is this device able to support video switching ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) || - ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) - video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; - /* Is this device able to retrieve a video ROM ? */ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) video_caps |= ACPI_VIDEO_ROM_AVAILABLE; @@ -161,8 +155,6 @@ long acpi_video_get_capabilities(acpi_handle graphics_handle) * * if (dmi_name_in_vendors("XY")) { * acpi_video_support |= - * ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR; - * acpi_video_support |= * ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; *} */ @@ -212,33 +204,8 @@ int acpi_video_backlight_support(void) EXPORT_SYMBOL(acpi_video_backlight_support); /* - * Returns true if video.ko can do display output switching. - * This does not work well/at all with binary graphics drivers - * which disable system io ranges and do it on their own. - */ -int acpi_video_display_switch_support(void) -{ - if (!acpi_video_caps_checked) - acpi_video_get_capabilities(NULL); - - if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR) - return 0; - else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO) - return 1; - - if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR) - return 0; - else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO) - return 1; - - return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING; -} -EXPORT_SYMBOL(acpi_video_display_switch_support); - -/* - * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video - * To force that backlight or display output switching is processed by vendor - * specific acpi drivers or video.ko driver. + * Use acpi_backlight=vendor/video to force that backlight switching + * is processed by vendor specific acpi drivers or video.ko driver. */ static int __init acpi_backlight(char *str) { @@ -255,19 +222,3 @@ static int __init acpi_backlight(char *str) return 1; } __setup("acpi_backlight=", acpi_backlight); - -static int __init acpi_display_output(char *str) -{ - if (str == NULL || *str == '\0') - return 1; - else { - if (!strcmp("vendor", str)) - acpi_video_support |= - ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR; - if (!strcmp("video", str)) - acpi_video_support |= - ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; - } - return 1; -} -__setup("acpi_display_output=", acpi_display_output); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 7af443672626..64828a7db77b 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -107,7 +107,6 @@ config DRM_I915 select FB_CFB_IMAGEBLIT # i915 depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick - select VIDEO_OUTPUT_CONTROL if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI select ACPI_VIDEO if ACPI diff --git a/drivers/gpu/stub/Kconfig b/drivers/gpu/stub/Kconfig index 0e1edd7311ff..09aea5f1556d 100644 --- a/drivers/gpu/stub/Kconfig +++ b/drivers/gpu/stub/Kconfig @@ -3,7 +3,6 @@ config STUB_POULSBO depends on PCI # Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick - select VIDEO_OUTPUT_CONTROL if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI select ACPI_VIDEO if ACPI |