diff options
64 files changed, 3042 insertions, 487 deletions
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt index 27717e816e71..eb871447d508 100644 --- a/Documentation/devicetree/bindings/regulator/da9211.txt +++ b/Documentation/devicetree/bindings/regulator/da9211.txt @@ -15,6 +15,8 @@ Required properties: Optional properties: - enable-gpios: platform gpio for control of BUCKA/BUCKB. - Any optional property defined in regulator.txt + - regulator-initial-mode and regulator-allowed-modes may be specified using + mode values from dt-bindings/regulator/dlg,da9211-regulator.h Example 1) DA9211 pmic: da9211@68 { @@ -30,6 +32,8 @@ Example 1) DA9211 regulator-min-microamp = <2000000>; regulator-max-microamp = <5000000>; enable-gpios = <&gpio 27 0>; + regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC + DA9211_BUCK_MODE_AUTO>; }; }; }; diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml new file mode 100644 index 000000000000..c9453d7ce227 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/google,cros-ec-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC controlled voltage regulators + +maintainers: + - Pi-Hsun Shih <pihsun@chromium.org> + +description: + Any property defined as part of the core regulator binding, defined in + regulator.yaml, can also be used. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: google,cros-ec-regulator + + reg: + maxItems: 1 + description: Identifier for the voltage regulator to ChromeOS EC. + +required: + - compatible + - reg + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + regulator@0 { + compatible = "google,cros-ec-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + reg = <0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt index ca58a68ffdf1..ab895cd1cac1 100644 --- a/Documentation/devicetree/bindings/regulator/lp872x.txt +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt @@ -37,8 +37,8 @@ Optional properties: (Documentation/devicetree/bindings/regulator/regulator.txt) Datasheet - - LP8720: http://www.ti.com/lit/ds/symlink/lp8720.pdf - - LP8725: http://www.ti.com/lit/ds/symlink/lp8725.pdf + - LP8720: https://www.ti.com/lit/ds/symlink/lp8720.pdf + - LP8725: https://www.ti.com/lit/ds/symlink/lp8725.pdf Example 1) LP8720 diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt index 01141fb00875..c080086d3e62 100644 --- a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt @@ -16,6 +16,9 @@ LDO: ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6, ldo_vibr +BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to +values specified in dt-bindings/regulator/mediatek,mt6397-regulator.h + Example: pmic { compatible = "mediatek,mt6397"; diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml new file mode 100644 index 000000000000..c2b0a8b6da1e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA9450A/B/C Power Management Integrated Circuit regulators + +maintainers: + - Robin Gong <yibin.gong@nxp.com> + +description: | + Regulator nodes should be named to BUCK_<number> and LDO_<number>. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Datasheet is available at + https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf + +#The valid names for PCA9450 regulator nodes are: +#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, +#LDO1, LDO2, LDO3, LDO4, LDO5 +#Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C. + +properties: + compatible: + enum: + - nxp,pca9450a + - nxp,pca9450b + - nxp,pca9450c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller + + patternProperties: + "^LDO[1-5]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: + pattern: "^LDO[1-5]$" + description: + should be "LDO1", ..., "LDO5" + + unevaluatedProperties: false + + "^BUCK[1-6]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: + pattern: "^BUCK[1-6]$" + description: + should be "BUCK1", ..., "BUCK6" + + nxp,dvs-run-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 600000 + maximum: 2187500 + description: + PMIC default "RUN" state voltage in uV. Only Buck1~3 have such + dvs(dynamic voltage scaling) property. + + nxp,dvs-standby-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 600000 + maximum: 2187500 + description: + PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such + dvs(dynamic voltage scaling) property. + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@25 { + compatible = "nxp,pca9450b"; + reg = <0x25>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml new file mode 100644 index 000000000000..eb61e04ef852 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/onnn,fan53880.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Onsemi FAN53880 PMIC + +maintainers: + - Christoph Fritz <chf.fritz@googlemail.com> + +description: | + The FAN53880 is an I2C porgrammable power management IC (PMIC) + that contains a BUCK (step-down converter), four low dropouts (LDO) + and one BOOST (step-up converter) output. It is designed for mobile + power applications. + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - onnn,fan53880 + + reg: + maxItems: 1 + + VIN12-supply: + description: Input supply phandle(s) for LDO1 and LDO2 + + VIN3-supply: + description: Input supply phandle(s) for LDO3 + + VIN4-supply: + description: Input supply phandle(s) for LDO4 + + PVIN-supply: + description: Input supply phandle(s) for BUCK and BOOST + + regulators: + type: object + $ref: regulator.yaml# + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts LDO[1-4], BUCK and BOOST + + patternProperties: + "^LDO[1-4]$": + type: object + $ref: regulator.yaml# + + "^BUCK|BOOST$": + type: object + $ref: regulator.yaml# + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@35 { + compatible = "onnn,fan53880"; + reg = <0x35>; + + PVIN-supply = <&fixreg_example_vcc>; + + regulators { + BUCK { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt deleted file mode 100644 index dea4384f4c03..000000000000 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +++ /dev/null @@ -1,320 +0,0 @@ -QCOM SMD RPM REGULATOR - -The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM. -Because SMD is used as the communication transport mechanism, the RPM resides as -a subnode of the SMD. As such, the SMD-RPM regulator requires that the SMD and -RPM nodes be present. - -Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for -information pertaining to the SMD node. - -Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt for -information regarding the RPM node. - -== Regulator - -Regulator nodes are identified by their compatible: - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-pm8841-regulators" - "qcom,rpm-pm8916-regulators" - "qcom,rpm-pm8941-regulators" - "qcom,rpm-pm8950-regulators" - "qcom,rpm-pm8994-regulators" - "qcom,rpm-pm8998-regulators" - "qcom,rpm-pma8084-regulators" - "qcom,rpm-pmi8994-regulators" - "qcom,rpm-pmi8998-regulators" - "qcom,rpm-pms405-regulators" - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: - Usage: optional (pm8841 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_l1_l2_l3-supply: -- vdd_l4_l5_l6-supply: -- vdd_l7-supply: -- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply: - Usage: optional (pm8916 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_l1_l19-supply: -- vdd_l2_l23-supply: -- vdd_l3-supply: -- vdd_l4_l5_l6_l7_l16-supply: -- vdd_l8_l11_l12_l17_l22-supply: -- vdd_l9_l10_l13_l14_l15_l18-supply: -- vdd_l20-supply: -- vdd_l21-supply: - Usage: optional (pm8950 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_l1_l3-supply: -- vdd_l2_lvs1_2_3-supply: -- vdd_l4_l11-supply: -- vdd_l5_l7-supply: -- vdd_l6_l12_l14_l15-supply: -- vdd_l8_l16_l18_l19-supply: -- vdd_l9_l10_l17_l22-supply: -- vdd_l13_l20_l23_l24-supply: -- vdd_l21-supply: -- vin_5vs-supply: - Usage: optional (pm8941 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vdd_s9-supply: -- vdd_s10-supply: -- vdd_s11-supply: -- vdd_s12-supply: -- vdd_l1-supply: -- vdd_l2_l26_l28-supply: -- vdd_l3_l11-supply: -- vdd_l4_l27_l31-supply: -- vdd_l5_l7-supply: -- vdd_l6_l12_l32-supply: -- vdd_l5_l7-supply: -- vdd_l8_l16_l30-supply: -- vdd_l9_l10_l18_l22-supply: -- vdd_l9_l10_l18_l22-supply: -- vdd_l3_l11-supply: -- vdd_l6_l12_l32-supply: -- vdd_l13_l19_l23_l24-supply: -- vdd_l14_l15-supply: -- vdd_l14_l15-supply: -- vdd_l8_l16_l30-supply: -- vdd_l17_l29-supply: -- vdd_l9_l10_l18_l22-supply: -- vdd_l13_l19_l23_l24-supply: -- vdd_l20_l21-supply: -- vdd_l20_l21-supply: -- vdd_l9_l10_l18_l22-supply: -- vdd_l13_l19_l23_l24-supply: -- vdd_l13_l19_l23_l24-supply: -- vdd_l25-supply: -- vdd_l2_l26_l28-supply: -- vdd_l4_l27_l31-supply: -- vdd_l2_l26_l28-supply: -- vdd_l17_l29-supply: -- vdd_l8_l16_l30-supply: -- vdd_l4_l27_l31-supply: -- vdd_l6_l12_l32-supply: -- vdd_lvs1_2-supply: - Usage: optional (pm8994 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_bst_byp-supply: - Usage: optional (pmi8994 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vdd_s9-supply: -- vdd_s10-supply: -- vdd_s11-supply: -- vdd_s12-supply: -- vdd_s13-supply: -- vdd_l1_l27-supply: -- vdd_l20_l24-supply: -- vdd_l26-supply: -- vdd_l2_l8_l17-supply: -- vdd_l3_l11-supply: -- vdd_l4_l5-supply: -- vdd_l6-supply: -- vdd_l7_l12_l14_l15-supply: -- vdd_l9-supply: -- vdd_l10_l23_l25-supply: -- vdd_l13_l19_l21-supply: -- vdd_l16_l28-supply: -- vdd_l18_l22-supply: -- vdd_lvs1_lvs2-supply: - Usage: optional (pmi8998 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vdd_s9-supply: -- vdd_s10-supply: -- vdd_s11-supply: -- vdd_s12-supply: -- vdd_l1_l11-supply: -- vdd_l2_l3_l4_l27-supply: -- vdd_l5_l7-supply: -- vdd_l6_l12_l14_l15_l26-supply: -- vdd_l8-supply: -- vdd_l9_l10_l13_l20_l23_l24-supply: -- vdd_l16_l25-supply: -- vdd_l17-supply: -- vdd_l18-supply: -- vdd_l19-supply: -- vdd_l21-supply: -- vdd_l22-supply: - Usage: optional (pma8084 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_bob-supply: - Usage: optional (pmi8998 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_l1_l2-supply: -- vdd_l3_l8-supply: -- vdd_l4-supply: -- vdd_l5_l6-supply: -- vdd_l7-supply: -- vdd_l3_l8-supply: -- vdd_l9-supply: -- vdd_l10_l11_l12_l13-supply: - Usage: optional (pms405 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -The regulator node houses sub-nodes for each regulator within the device. Each -sub-node is identified using the node's name, with valid values listed for each -of the pmics below. - -pm8841: - s1, s2, s3, s4, s5, s6, s7, s8 - -pm8916: - s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, - l14, l15, l16, l17, l18 - -pm8941: - s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, - l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, - lvs3, 5vs1, 5vs2 - -pm8994: - s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, - l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, - l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 - -pm8998: - s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, l3, l4, - l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, - l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2 - -pma8084: - s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, - l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, - l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 - -pmi8994: - s1, s2, s3, boost-bypass - -pmi8998: - bob - -pms405: - s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, - l13 - -The content of each sub-node is defined by the standard binding for regulators - -see regulator.txt. - -= EXAMPLE - - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; - - pm8941-regulators { - compatible = "qcom,rpm-pm8941-regulators"; - vdd_l13_l20_l23_l24-supply = <&pm8941_boost>; - - pm8941_s3: s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8941_boost: s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - pm8941_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml new file mode 100644 index 000000000000..d2022206081f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,smd-rpm-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCOM SMD RPM REGULATOR + +description: + The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM. + Because SMD is used as the communication transport mechanism, the RPM + resides as a subnode of the SMD. As such, the SMD-RPM regulator requires + that the SMD and RPM nodes be present. + + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for + information pertaining to the SMD node. + + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml + for information regarding the RPM node. + + The regulator node houses sub-nodes for each regulator within the device. + Each sub-node is identified using the node's name, with valid values listed + for each of the pmics below. + + For mp5496, s2 + + For pm8841, s1, s2, s3, s4, s5, s6, s7, s8 + + For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18 + + For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, + lvs3, 5vs1, 5vs2 + + For pm8994, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, + l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, + l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 + + For pm8998, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, + l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, + l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2 + + For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, + l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, + l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 + + For pmi8994, s1, s2, s3, boost-bypass + + For pmi8998, bob + + For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13 + +maintainers: + - Kathiravan T <kathirav@codeaurora.org> + +properties: + compatible: + enum: + - qcom,rpm-mp5496-regulators + - qcom,rpm-pm8841-regulators + - qcom,rpm-pm8916-regulators + - qcom,rpm-pm8941-regulators + - qcom,rpm-pm8950-regulators + - qcom,rpm-pm8994-regulators + - qcom,rpm-pm8998-regulators + - qcom,rpm-pma8084-regulators + - qcom,rpm-pmi8994-regulators + - qcom,rpm-pmi8998-regulators + - qcom,rpm-pms405-regulators + +patternProperties: + ".*-supply$": + description: Input supply phandle(s) for this node + + "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$": + description: List of regulators and its properties + allOf: + - $ref: regulator.yaml# + +additionalProperties: false + +required: + - compatible + +examples: + - | + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l13_l20_l23_l24-supply = <&pm8941_boost>; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_boost: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml new file mode 100644 index 000000000000..12ed98c28aaa --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,usb-vbus-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The Qualcomm PMIC VBUS output regulator driver + +maintainers: + - Wesley Cheng <wcheng@codeaurora.org> + +description: | + This regulator driver controls the VBUS output by the Qualcomm PMIC. This + regulator will be enabled in situations where the device is required to + provide power to the connected peripheral. + +properties: + compatible: + enum: + - qcom,pm8150b-vbus-reg + + reg: + maxItems: 1 + description: VBUS output base address + +required: + - compatible + +additionalProperties: false + +examples: + - | + pm8150b { + #address-cells = <1>; + #size-cells = <0>; + pm8150b_vbus: dcdc@1100 { + compatible = "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml new file mode 100644 index 000000000000..085cbd1ad8d0 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) Regulator + +maintainers: + - Sumit Semwal <sumit.semwal@linaro.org> + +description: + LAB can be used as a positive boost power supply and IBB can be used as a + negative boost power supply for display panels. Currently implemented for + pmi8998. + +properties: + compatible: + const: qcom,pmi8998-lab-ibb + + lab: + type: object + + properties: + + interrupts: + maxItems: 1 + description: + Short-circuit interrupt for lab. + + required: + - interrupts + + ibb: + type: object + + properties: + + interrupts: + maxItems: 1 + description: + Short-circuit interrupt for lab. + + required: + - interrupts + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + labibb { + compatible = "qcom,pmi8998-lab-ibb"; + + lab { + interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "sc-err"; + }; + + ibb { + interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "sc-err"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml new file mode 100644 index 000000000000..15983cdc7c28 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/silergy,sy8827n.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy8827n PMIC + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +properties: + compatible: + enum: + - silergy,sy8827n + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to enable/disable the regulator. + maxItems: 1 + + silergy,vsel-state-high: + type: boolean + description: + Indicates if the VSEL pin is set to high. + If this property is missing, assume the VSEL pin is set to low. + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@60 { + compatible = "silergy,sy8827n"; + reg = <0x60>; + }; + }; + +... diff --git a/drivers/platform/chrome/cros_ec_trace.c b/drivers/platform/chrome/cros_ec_trace.c index 523a39bd0ff6..425e9441b7ca 100644 --- a/drivers/platform/chrome/cros_ec_trace.c +++ b/drivers/platform/chrome/cros_ec_trace.c @@ -161,6 +161,11 @@ TRACE_SYMBOL(EC_CMD_ADC_READ), \ TRACE_SYMBOL(EC_CMD_ROLLBACK_INFO), \ TRACE_SYMBOL(EC_CMD_AP_RESET), \ + TRACE_SYMBOL(EC_CMD_REGULATOR_GET_INFO), \ + TRACE_SYMBOL(EC_CMD_REGULATOR_ENABLE), \ + TRACE_SYMBOL(EC_CMD_REGULATOR_IS_ENABLED), \ + TRACE_SYMBOL(EC_CMD_REGULATOR_SET_VOLTAGE), \ + TRACE_SYMBOL(EC_CMD_REGULATOR_GET_VOLTAGE), \ TRACE_SYMBOL(EC_CMD_CR51_BASE), \ TRACE_SYMBOL(EC_CMD_CR51_LAST), \ TRACE_SYMBOL(EC_CMD_FP_PASSTHRU), \ diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index edb1c4f8b496..de17ef7e18f0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -238,6 +238,16 @@ config REGULATOR_CPCAP Say y here for CPCAP regulator found on some Motorola phones and tablets such as Droid 4. +config REGULATOR_CROS_EC + tristate "ChromeOS EC regulators" + depends on CROS_EC && OF + help + This driver supports voltage regulators that is connected to ChromeOS + EC and controlled through EC host commands. + + This driver can also be built as a module. If so, the module + will be called cros-ec-regulator. + config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X @@ -326,6 +336,16 @@ config REGULATOR_FAN53555 input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. +config REGULATOR_FAN53880 + tristate "Fairchild FAN53880 Regulator" + depends on I2C && (OF || COMPILE_TEST) + select REGMAP_I2C + help + This driver supports Fairchild (ON Semiconductor) FAN53880 + regulator. The regulator is a programmable power management IC + (PMIC), it is controlled by I2C and provides one BUCK, one BOOST + and four LDO outputs. + config REGULATOR_GPIO tristate "GPIO regulator support" depends on GPIOLIB || COMPILE_TEST @@ -730,6 +750,14 @@ config REGULATOR_PBIAS This driver provides support for OMAP pbias modelled regulators. +config REGULATOR_PCA9450 + tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" + depends on I2C + select REGMAP_I2C + help + Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC + regulator driver. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP @@ -826,6 +854,16 @@ config REGULATOR_QCOM_SPMI Qualcomm SPMI PMICs as a module. The module will be named "qcom_spmi-regulator". +config REGULATOR_QCOM_USB_VBUS + tristate "Qualcomm USB Vbus regulator driver" + depends on SPMI || COMPILE_TEST + help + If you say yes to this option, support will be included for the + regulator used to enable the VBUS output. + + Say M here if you want to include support for enabling the VBUS output + as a module. The module will be named "qcom_usb_vbus_regulator". + config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" depends on MFD_RC5T583 @@ -989,6 +1027,13 @@ config REGULATOR_SY8824X help This driver supports SY8824C single output regulator. +config REGULATOR_SY8827N + tristate "Silergy SY8827N regulator" + depends on I2C && (OF || COMPILE_TEST) + select REGMAP_I2C + help + This driver supports SY8827N single output regulator. + config REGULATOR_TPS51632 tristate "TI TPS51632 Power Regulator" depends on I2C @@ -1178,5 +1223,15 @@ config REGULATOR_WM8994 This driver provides support for the voltage regulators on the WM8994 CODEC. +config REGULATOR_QCOM_LABIBB + tristate "QCOM LAB/IBB regulator support" + depends on SPMI || COMPILE_TEST + help + This driver supports Qualcomm's LAB/IBB regulators present on the + Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI + based PMIC implementations. LAB can be used as positive + boost regulator and IBB can be used as a negative boost regulator + for LCD display panel. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 0796e4a47afa..d8d3ecf526a8 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_88PG86X) += 88pg86x.o obj-$(CONFIG_REGULATOR_88PM800) += 88pm800-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o +obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o @@ -41,6 +42,7 @@ obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o +obj-$(CONFIG_REGULATOR_FAN53880) += fan53880.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o @@ -88,11 +90,14 @@ obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o +obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o +obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o +obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o @@ -120,6 +125,7 @@ obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o +obj-$(CONFIG_REGULATOR_SY8827N) += sy8827n.o obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 716ca5bb178e..47b8b6f7b571 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -59,6 +59,7 @@ struct ab8500_shared_mode { * @voltage_bank: bank to control regulator voltage * @voltage_reg: register to control regulator voltage * @voltage_mask: mask to control regulator voltage + * @expand_register: */ struct ab8500_regulator_info { struct device *dev; @@ -79,12 +80,6 @@ struct ab8500_regulator_info { u8 voltage_bank; u8 voltage_reg; u8 voltage_mask; - struct { - u8 voltage_limit; - u8 voltage_bank; - u8 voltage_reg; - u8 voltage_mask; - } expand_register; }; /* voltage tables for the vauxn/vintcore supplies */ diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index ca92b3de0e9c..f9856d4e295f 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -139,7 +139,7 @@ static struct regulator_ops anatop_rops = { .map_voltage = regulator_map_voltage_linear, }; -static struct regulator_ops anatop_core_rops = { +static const struct regulator_ops anatop_core_rops = { .enable = anatop_regmap_enable, .disable = anatop_regmap_disable, .is_enabled = anatop_regmap_is_enabled, diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 03154f5b939f..75ff7c563c5d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -105,6 +105,7 @@ static int regulator_balance_voltage(struct regulator_dev *rdev, static struct regulator *create_regulator(struct regulator_dev *rdev, struct device *dev, const char *supply_name); +static void destroy_regulator(struct regulator *regulator); static void _regulator_put(struct regulator *regulator); const char *rdev_get_name(struct regulator_dev *rdev) @@ -2034,20 +2035,9 @@ struct regulator *regulator_get_optional(struct device *dev, const char *id) } EXPORT_SYMBOL_GPL(regulator_get_optional); -/* regulator_list_mutex lock held by regulator_put() */ -static void _regulator_put(struct regulator *regulator) +static void destroy_regulator(struct regulator *regulator) { - struct regulator_dev *rdev; - - if (IS_ERR_OR_NULL(regulator)) - return; - - lockdep_assert_held_once(®ulator_list_mutex); - - /* Docs say you must disable before calling regulator_put() */ - WARN_ON(regulator->enable_count); - - rdev = regulator->rdev; + struct regulator_dev *rdev = regulator->rdev; debugfs_remove_recursive(regulator->debugfs); @@ -2068,6 +2058,24 @@ static void _regulator_put(struct regulator *regulator) kfree_const(regulator->supply_name); kfree(regulator); +} + +/* regulator_list_mutex lock held by regulator_put() */ +static void _regulator_put(struct regulator *regulator) +{ + struct regulator_dev *rdev; + + if (IS_ERR_OR_NULL(regulator)) + return; + + lockdep_assert_held_once(®ulator_list_mutex); + + /* Docs say you must disable before calling regulator_put() */ + WARN_ON(regulator->enable_count); + + rdev = regulator->rdev; + + destroy_regulator(regulator); module_put(rdev->owner); put_device(&rdev->dev); @@ -2347,6 +2355,37 @@ static void _regulator_enable_delay(unsigned int delay) udelay(us); } +/** + * _regulator_check_status_enabled + * + * A helper function to check if the regulator status can be interpreted + * as 'regulator is enabled'. + * @rdev: the regulator device to check + * + * Return: + * * 1 - if status shows regulator is in enabled state + * * 0 - if not enabled state + * * Error Value - as received from ops->get_status() + */ +static inline int _regulator_check_status_enabled(struct regulator_dev *rdev) +{ + int ret = rdev->desc->ops->get_status(rdev); + + if (ret < 0) { + rdev_info(rdev, "get_status returned error: %d\n", ret); + return ret; + } + + switch (ret) { + case REGULATOR_STATUS_OFF: + case REGULATOR_STATUS_ERROR: + case REGULATOR_STATUS_UNDEFINED: + return 0; + default: + return 1; + } +} + static int _regulator_do_enable(struct regulator_dev *rdev) { int ret, delay; @@ -2407,7 +2446,37 @@ static int _regulator_do_enable(struct regulator_dev *rdev) * together. */ trace_regulator_enable_delay(rdev_get_name(rdev)); - _regulator_enable_delay(delay); + /* If poll_enabled_time is set, poll upto the delay calculated + * above, delaying poll_enabled_time uS to check if the regulator + * actually got enabled. + * If the regulator isn't enabled after enable_delay has + * expired, return -ETIMEDOUT. + */ + if (rdev->desc->poll_enabled_time) { + unsigned int time_remaining = delay; + + while (time_remaining > 0) { + _regulator_enable_delay(rdev->desc->poll_enabled_time); + + if (rdev->desc->ops->get_status) { + ret = _regulator_check_status_enabled(rdev); + if (ret < 0) + return ret; + else if (ret) + break; + } else if (rdev->desc->ops->is_enabled(rdev)) + break; + + time_remaining -= rdev->desc->poll_enabled_time; + } + + if (time_remaining <= 0) { + rdev_err(rdev, "Enabled check timed out\n"); + return -ETIMEDOUT; + } + } else { + _regulator_enable_delay(delay); + } trace_regulator_enable_complete(rdev_get_name(rdev)); @@ -5023,7 +5092,6 @@ regulator_register(const struct regulator_desc *regulator_desc, struct regulator_dev *rdev; bool dangling_cfg_gpiod = false; bool dangling_of_gpiod = false; - bool reg_device_fail = false; struct device *dev; int ret, i; @@ -5152,10 +5220,12 @@ regulator_register(const struct regulator_desc *regulator_desc, } /* register with sysfs */ + device_initialize(&rdev->dev); rdev->dev.class = ®ulator_class; rdev->dev.parent = dev; dev_set_name(&rdev->dev, "regulator.%lu", (unsigned long) atomic_inc_return(®ulator_no)); + dev_set_drvdata(&rdev->dev, rdev); /* set regulator constraints */ if (init_data) @@ -5206,12 +5276,9 @@ regulator_register(const struct regulator_desc *regulator_desc, !rdev->desc->fixed_uV) rdev->is_switch = true; - dev_set_drvdata(&rdev->dev, rdev); - ret = device_register(&rdev->dev); - if (ret != 0) { - reg_device_fail = true; + ret = device_add(&rdev->dev); + if (ret != 0) goto unset_supplies; - } rdev_init_debugfs(rdev); @@ -5233,17 +5300,15 @@ unset_supplies: mutex_unlock(®ulator_list_mutex); wash: kfree(rdev->coupling_desc.coupled_rdevs); - kfree(rdev->constraints); mutex_lock(®ulator_list_mutex); regulator_ena_gpio_free(rdev); mutex_unlock(®ulator_list_mutex); + put_device(&rdev->dev); + rdev = NULL; clean: if (dangling_of_gpiod) gpiod_put(config->ena_gpiod); - if (reg_device_fail) - put_device(&rdev->dev); - else - kfree(rdev); + kfree(rdev); kfree(config); rinse: if (dangling_cfg_gpiod) diff --git a/drivers/regulator/cpcap-regulator.c b/drivers/regulator/cpcap-regulator.c index f80781d58a28..79b3eb3222c6 100644 --- a/drivers/regulator/cpcap-regulator.c +++ b/drivers/regulator/cpcap-regulator.c @@ -89,7 +89,7 @@ */ #define CPCAP_REG_OFF_MODE_SEC BIT(15) -/** +/* * SoC specific configuration for CPCAP regulator. There are at least three * different SoCs each with their own parameters: omap3, omap4 and tegra2. * @@ -169,7 +169,7 @@ enum cpcap_regulator_id { static int cpcap_regulator_enable(struct regulator_dev *rdev) { struct cpcap_regulator *regulator = rdev_get_drvdata(rdev); - int error, ignore; + int error; error = regulator_enable_regmap(rdev); if (error) @@ -180,7 +180,7 @@ static int cpcap_regulator_enable(struct regulator_dev *rdev) regulator->assign_mask, regulator->assign_mask); if (error) - ignore = regulator_disable_regmap(rdev); + regulator_disable_regmap(rdev); } return error; @@ -193,7 +193,7 @@ static int cpcap_regulator_enable(struct regulator_dev *rdev) static int cpcap_regulator_disable(struct regulator_dev *rdev) { struct cpcap_regulator *regulator = rdev_get_drvdata(rdev); - int error, ignore; + int error; if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) { error = regmap_update_bits(rdev->regmap, regulator->assign_reg, @@ -204,9 +204,9 @@ static int cpcap_regulator_disable(struct regulator_dev *rdev) error = regulator_disable_regmap(rdev); if (error && (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC)) { - ignore = regmap_update_bits(rdev->regmap, regulator->assign_reg, - regulator->assign_mask, - regulator->assign_mask); + regmap_update_bits(rdev->regmap, regulator->assign_reg, + regulator->assign_mask, + regulator->assign_mask); } return error; @@ -256,7 +256,7 @@ static int cpcap_regulator_set_mode(struct regulator_dev *rdev, CPCAP_BIT_AUDIO_LOW_PWR, value); } -static struct regulator_ops cpcap_regulator_ops = { +static const struct regulator_ops cpcap_regulator_ops = { .enable = cpcap_regulator_enable, .disable = cpcap_regulator_disable, .is_enabled = regulator_is_enabled_regmap, @@ -325,7 +325,7 @@ static const unsigned int vvib_val_tbl[] = { 1300000, 1800000, 2000000, static const unsigned int vusb_val_tbl[] = { 0, 3300000, }; static const unsigned int vaudio_val_tbl[] = { 0, 2775000, }; -/** +/* * SoC specific configuration for omap4. The data below is comes from Motorola * Linux kernel tree. It's basically the values of cpcap_regltr_data, * cpcap_regulator_mode_values and cpcap_regulator_off_mode_values, see diff --git a/drivers/regulator/cros-ec-regulator.c b/drivers/regulator/cros-ec-regulator.c new file mode 100644 index 000000000000..3117bbd2826b --- /dev/null +++ b/drivers/regulator/cros-ec-regulator.c @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright 2020 Google LLC. + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_data/cros_ec_proto.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/slab.h> + +struct cros_ec_regulator_data { + struct regulator_desc desc; + struct regulator_dev *dev; + struct cros_ec_device *ec_dev; + + u32 index; + + u16 *voltages_mV; + u16 num_voltages; +}; + +static int cros_ec_cmd(struct cros_ec_device *ec, u32 version, u32 command, + void *outdata, u32 outsize, void *indata, u32 insize) +{ + struct cros_ec_command *msg; + int ret; + + msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + msg->version = version; + msg->command = command; + msg->outsize = outsize; + msg->insize = insize; + + if (outdata && outsize > 0) + memcpy(msg->data, outdata, outsize); + + ret = cros_ec_cmd_xfer_status(ec, msg); + if (ret < 0) + goto cleanup; + + if (insize) + memcpy(indata, msg->data, insize); + +cleanup: + kfree(msg); + return ret; +} + +static int cros_ec_regulator_enable(struct regulator_dev *dev) +{ + struct cros_ec_regulator_data *data = rdev_get_drvdata(dev); + struct ec_params_regulator_enable cmd = { + .index = data->index, + .enable = 1, + }; + + return cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_ENABLE, &cmd, + sizeof(cmd), NULL, 0); +} + +static int cros_ec_regulator_disable(struct regulator_dev *dev) +{ + struct cros_ec_regulator_data *data = rdev_get_drvdata(dev); + struct ec_params_regulator_enable cmd = { + .index = data->index, + .enable = 0, + }; + + return cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_ENABLE, &cmd, + sizeof(cmd), NULL, 0); +} + +static int cros_ec_regulator_is_enabled(struct regulator_dev *dev) +{ + struct cros_ec_regulator_data *data = rdev_get_drvdata(dev); + struct ec_params_regulator_is_enabled cmd = { + .index = data->index, + }; + struct ec_response_regulator_is_enabled resp; + int ret; + + ret = cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_IS_ENABLED, &cmd, + sizeof(cmd), &resp, sizeof(resp)); + if (ret < 0) + return ret; + return resp.enabled; +} + +static int cros_ec_regulator_list_voltage(struct regulator_dev *dev, + unsigned int selector) +{ + struct cros_ec_regulator_data *data = rdev_get_drvdata(dev); + + if (selector >= data->num_voltages) + return -EINVAL; + + return data->voltages_mV[selector] * 1000; +} + +static int cros_ec_regulator_get_voltage(struct regulator_dev *dev) +{ + struct cros_ec_regulator_data *data = rdev_get_drvdata(dev); + struct ec_params_regulator_get_voltage cmd = { + .index = data->index, + }; + struct ec_response_regulator_get_voltage resp; + int ret; + + ret = cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_GET_VOLTAGE, &cmd, + sizeof(cmd), &resp, sizeof(resp)); + if (ret < 0) + return ret; + return resp.voltage_mv * 1000; +} + +static int cros_ec_regulator_set_voltage(struct regulator_dev *dev, int min_uV, + int max_uV, unsigned int *selector) +{ + struct cros_ec_regulator_data *data = rdev_get_drvdata(dev); + int min_mV = DIV_ROUND_UP(min_uV, 1000); + int max_mV = max_uV / 1000; + struct ec_params_regulator_set_voltage cmd = { + .index = data->index, + .min_mv = min_mV, + .max_mv = max_mV, + }; + + /* + * This can happen when the given range [min_uV, max_uV] doesn't + * contain any voltage that can be represented exactly in mV. + */ + if (min_mV > max_mV) + return -EINVAL; + + return cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_SET_VOLTAGE, &cmd, + sizeof(cmd), NULL, 0); +} + +static const struct regulator_ops cros_ec_regulator_voltage_ops = { + .enable = cros_ec_regulator_enable, + .disable = cros_ec_regulator_disable, + .is_enabled = cros_ec_regulator_is_enabled, + .list_voltage = cros_ec_regulator_list_voltage, + .get_voltage = cros_ec_regulator_get_voltage, + .set_voltage = cros_ec_regulator_set_voltage, +}; + +static int cros_ec_regulator_init_info(struct device *dev, + struct cros_ec_regulator_data *data) +{ + struct ec_params_regulator_get_info cmd = { + .index = data->index, + }; + struct ec_response_regulator_get_info resp; + int ret; + + ret = cros_ec_cmd(data->ec_dev, 0, EC_CMD_REGULATOR_GET_INFO, &cmd, + sizeof(cmd), &resp, sizeof(resp)); + if (ret < 0) + return ret; + + data->num_voltages = + min_t(u16, ARRAY_SIZE(resp.voltages_mv), resp.num_voltages); + data->voltages_mV = + devm_kmemdup(dev, resp.voltages_mv, + sizeof(u16) * data->num_voltages, GFP_KERNEL); + data->desc.n_voltages = data->num_voltages; + + /* Make sure the returned name is always a valid string */ + resp.name[ARRAY_SIZE(resp.name) - 1] = '\0'; + data->desc.name = devm_kstrdup(dev, resp.name, GFP_KERNEL); + if (!data->desc.name) + return -ENOMEM; + + return 0; +} + +static int cros_ec_regulator_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct cros_ec_regulator_data *drvdata; + struct regulator_init_data *init_data; + struct regulator_config cfg = {}; + struct regulator_desc *desc; + int ret; + + drvdata = devm_kzalloc( + &pdev->dev, sizeof(struct cros_ec_regulator_data), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + drvdata->ec_dev = dev_get_drvdata(dev->parent); + desc = &drvdata->desc; + + init_data = of_get_regulator_init_data(dev, np, desc); + if (!init_data) + return -EINVAL; + + ret = of_property_read_u32(np, "reg", &drvdata->index); + if (ret < 0) + return ret; + + desc->owner = THIS_MODULE; + desc->type = REGULATOR_VOLTAGE; + desc->ops = &cros_ec_regulator_voltage_ops; + + ret = cros_ec_regulator_init_info(dev, drvdata); + if (ret < 0) + return ret; + + cfg.dev = &pdev->dev; + cfg.init_data = init_data; + cfg.driver_data = drvdata; + cfg.of_node = np; + + drvdata->dev = devm_regulator_register(dev, &drvdata->desc, &cfg); + if (IS_ERR(drvdata->dev)) { + dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret); + return PTR_ERR(drvdata->dev); + } + + platform_set_drvdata(pdev, drvdata); + + return 0; +} + +static const struct of_device_id regulator_cros_ec_of_match[] = { + { .compatible = "google,cros-ec-regulator", }, + {} +}; +MODULE_DEVICE_TABLE(of, regulator_cros_ec_of_match); + +static struct platform_driver cros_ec_regulator_driver = { + .probe = cros_ec_regulator_probe, + .driver = { + .name = "cros-ec-regulator", + .of_match_table = regulator_cros_ec_of_match, + }, +}; + +module_platform_driver(cros_ec_regulator_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ChromeOS EC controlled regulator"); +MODULE_AUTHOR("Pi-Hsun Shih <pihsun@chromium.org>"); diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c index 2ea4362ffa5c..297b3aa7c753 100644 --- a/drivers/regulator/da9211-regulator.c +++ b/drivers/regulator/da9211-regulator.c @@ -17,6 +17,7 @@ #include <linux/gpio/consumer.h> #include <linux/regulator/of_regulator.h> #include <linux/regulator/da9211.h> +#include <dt-bindings/regulator/dlg,da9211-regulator.h> #include "da9211-regulator.h" /* DEVICE IDs */ @@ -24,10 +25,6 @@ #define DA9213_DEVICE_ID 0x23 #define DA9215_DEVICE_ID 0x24 -#define DA9211_BUCK_MODE_SLEEP 1 -#define DA9211_BUCK_MODE_SYNC 2 -#define DA9211_BUCK_MODE_AUTO 3 - /* DA9211 REGULATOR IDs */ #define DA9211_ID_BUCKA 0 #define DA9211_ID_BUCKB 1 @@ -89,6 +86,20 @@ static const int da9215_current_limits[] = { 5600000, 5800000, 6000000, 6200000, 6400000, 6600000, 6800000, 7000000 }; +static unsigned int da9211_map_buck_mode(unsigned int mode) +{ + switch (mode) { + case DA9211_BUCK_MODE_SLEEP: + return REGULATOR_MODE_STANDBY; + case DA9211_BUCK_MODE_SYNC: + return REGULATOR_MODE_FAST; + case DA9211_BUCK_MODE_AUTO: + return REGULATOR_MODE_NORMAL; + default: + return REGULATOR_MODE_INVALID; + } +} + static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev) { int id = rdev_get_id(rdev); @@ -236,6 +247,7 @@ static const struct regulator_ops da9211_buck_ops = { .vsel_reg = DA9211_REG_VBUCKA_A + DA9211_ID_##_id * 2,\ .vsel_mask = DA9211_VBUCK_MASK,\ .owner = THIS_MODULE,\ + .of_map_mode = da9211_map_buck_mode,\ } static struct regulator_desc da9211_regulators[] = { @@ -245,8 +257,14 @@ static struct regulator_desc da9211_regulators[] = { #ifdef CONFIG_OF static struct of_regulator_match da9211_matches[] = { - [DA9211_ID_BUCKA] = { .name = "BUCKA" }, - [DA9211_ID_BUCKB] = { .name = "BUCKB" }, + [DA9211_ID_BUCKA] = { + .name = "BUCKA", + .desc = &da9211_regulators[DA9211_ID_BUCKA], + }, + [DA9211_ID_BUCKB] = { + .name = "BUCKB", + .desc = &da9211_regulators[DA9211_ID_BUCKB], + }, }; static struct da9211_pdata *da9211_parse_regulators_dt( diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c index f604c8db6d0e..c3ad6aa6b5d3 100644 --- a/drivers/regulator/dbx500-prcmu.c +++ b/drivers/regulator/dbx500-prcmu.c @@ -110,13 +110,6 @@ static int ux500_regulator_status_show(struct seq_file *s, void *p) } DEFINE_SHOW_ATTRIBUTE(ux500_regulator_status); -int __attribute__((weak)) dbx500_regulator_testcase( - struct dbx500_regulator_info *regulator_info, - int num_regulators) -{ - return 0; -} - int ux500_regulator_debug_init(struct platform_device *pdev, struct dbx500_regulator_info *regulator_info, @@ -152,7 +145,6 @@ ux500_regulator_debug_init(struct platform_device *pdev, if (!rdebug.state_after_suspend) goto exit_free; - dbx500_regulator_testcase(regulator_info, num_regulators); return 0; exit_free: diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c index 3ea1c170f840..3091210889e3 100644 --- a/drivers/regulator/devres.c +++ b/drivers/regulator/devres.c @@ -41,8 +41,8 @@ static struct regulator *_devm_regulator_get(struct device *dev, const char *id, /** * devm_regulator_get - Resource managed regulator_get() - * @dev: device for regulator "consumer" - * @id: Supply name or regulator ID. + * @dev: device to supply + * @id: supply name or regulator ID. * * Managed regulator_get(). Regulators returned from this function are * automatically regulator_put() on driver detach. See regulator_get() for more @@ -56,8 +56,8 @@ EXPORT_SYMBOL_GPL(devm_regulator_get); /** * devm_regulator_get_exclusive - Resource managed regulator_get_exclusive() - * @dev: device for regulator "consumer" - * @id: Supply name or regulator ID. + * @dev: device to supply + * @id: supply name or regulator ID. * * Managed regulator_get_exclusive(). Regulators returned from this function * are automatically regulator_put() on driver detach. See regulator_get() for @@ -72,8 +72,8 @@ EXPORT_SYMBOL_GPL(devm_regulator_get_exclusive); /** * devm_regulator_get_optional - Resource managed regulator_get_optional() - * @dev: device for regulator "consumer" - * @id: Supply name or regulator ID. + * @dev: device to supply + * @id: supply name or regulator ID. * * Managed regulator_get_optional(). Regulators returned from this * function are automatically regulator_put() on driver detach. See @@ -130,9 +130,9 @@ static void devm_regulator_bulk_release(struct device *dev, void *res) /** * devm_regulator_bulk_get - managed get multiple regulator consumers * - * @dev: Device to supply - * @num_consumers: Number of consumers to register - * @consumers: Configuration of consumers; clients are stored here. + * @dev: device to supply + * @num_consumers: number of consumers to register + * @consumers: configuration of consumers; clients are stored here. * * @return 0 on success, an errno on failure. * @@ -173,8 +173,9 @@ static void devm_rdev_release(struct device *dev, void *res) /** * devm_regulator_register - Resource managed regulator_register() + * @dev: device to supply * @regulator_desc: regulator to register - * @config: runtime configuration for regulator + * @config: runtime configuration for regulator * * Called by regulator drivers to register a regulator. Returns a * valid pointer to struct regulator_dev on success or an ERR_PTR() on @@ -216,7 +217,8 @@ static int devm_rdev_match(struct device *dev, void *res, void *data) /** * devm_regulator_unregister - Resource managed regulator_unregister() - * @regulator: regulator to free + * @dev: device to supply + * @rdev: regulator to free * * Unregister a regulator registered with devm_regulator_register(). * Normally this function will not need to be called and the resource @@ -257,10 +259,10 @@ static void devm_regulator_destroy_supply_alias(struct device *dev, void *res) * devm_regulator_register_supply_alias - Resource managed * regulator_register_supply_alias() * - * @dev: device that will be given as the regulator "consumer" - * @id: Supply name or regulator ID + * @dev: device to supply + * @id: supply name or regulator ID * @alias_dev: device that should be used to lookup the supply - * @alias_id: Supply name or regulator ID that should be used to lookup the + * @alias_id: supply name or regulator ID that should be used to lookup the * supply * * The supply alias will automatically be unregistered when the source @@ -298,8 +300,8 @@ EXPORT_SYMBOL_GPL(devm_regulator_register_supply_alias); * devm_regulator_unregister_supply_alias - Resource managed * regulator_unregister_supply_alias() * - * @dev: device that will be given as the regulator "consumer" - * @id: Supply name or regulator ID + * @dev: device to supply + * @id: supply name or regulator ID * * Unregister an alias registered with * devm_regulator_register_supply_alias(). Normally this function @@ -325,12 +327,12 @@ EXPORT_SYMBOL_GPL(devm_regulator_unregister_supply_alias); * devm_regulator_bulk_register_supply_alias - Managed register * multiple aliases * - * @dev: device that will be given as the regulator "consumer" - * @id: List of supply names or regulator IDs + * @dev: device to supply + * @id: list of supply names or regulator IDs * @alias_dev: device that should be used to lookup the supply - * @alias_id: List of supply names or regulator IDs that should be used to - * lookup the supply - * @num_id: Number of aliases to register + * @alias_id: list of supply names or regulator IDs that should be used to + * lookup the supply + * @num_id: number of aliases to register * * @return 0 on success, an errno on failure. * @@ -375,9 +377,9 @@ EXPORT_SYMBOL_GPL(devm_regulator_bulk_register_supply_alias); * devm_regulator_bulk_unregister_supply_alias - Managed unregister * multiple aliases * - * @dev: device that will be given as the regulator "consumer" - * @id: List of supply names or regulator IDs - * @num_id: Number of aliases to unregister + * @dev: device to supply + * @id: list of supply names or regulator IDs + * @num_id: number of aliases to unregister * * Unregister aliases registered with * devm_regulator_bulk_register_supply_alias(). Normally this function @@ -421,7 +423,7 @@ static void devm_regulator_destroy_notifier(struct device *dev, void *res) * regulator_register_notifier * * @regulator: regulator source - * @nb: notifier block + * @nb: notifier block * * The notifier will be registers under the consumer device and be * automatically be unregistered when the source device is unbound. @@ -458,7 +460,7 @@ EXPORT_SYMBOL_GPL(devm_regulator_register_notifier); * regulator_unregister_notifier() * * @regulator: regulator source - * @nb: notifier block + * @nb: notifier block * * Unregister a notifier registered with devm_regulator_register_notifier(). * Normally this function will not need to be called and the resource diff --git a/drivers/regulator/fan53880.c b/drivers/regulator/fan53880.c new file mode 100644 index 000000000000..e83eb4fb1876 --- /dev/null +++ b/drivers/regulator/fan53880.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> + +enum fan53880_regulator_ids { + FAN53880_LDO1, + FAN53880_LDO2, + FAN53880_LDO3, + FAN53880_LDO4, + FAN53880_BUCK, + FAN53880_BOOST, +}; + +enum fan53880_registers { + FAN53880_PRODUCT_ID = 0x00, + FAN53880_SILICON_REV, + FAN53880_BUCKVOUT, + FAN53880_BOOSTVOUT, + FAN53880_LDO1VOUT, + FAN53880_LDO2VOUT, + FAN53880_LDO3VOUT, + FAN53880_LDO4VOUT, + FAN53880_IOUT, + FAN53880_ENABLE, + FAN53880_ENABLE_BOOST, +}; + +#define FAN53880_ID 0x01 + +static const struct regulator_ops fan53880_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +#define FAN53880_LDO(_num, _supply, _default) \ + [FAN53880_LDO ## _num] = { \ + .name = "LDO"#_num, \ + .of_match = of_match_ptr("LDO"#_num), \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .linear_ranges = (struct linear_range[]) { \ + REGULATOR_LINEAR_RANGE(_default, 0x0, 0x0, 0), \ + REGULATOR_LINEAR_RANGE(800000, 0xf, 0x73, 25000), \ + }, \ + .n_linear_ranges = 2, \ + .vsel_reg = FAN53880_LDO ## _num ## VOUT, \ + .vsel_mask = 0x7f, \ + .enable_reg = FAN53880_ENABLE, \ + .enable_mask = BIT(_num - 1), \ + .enable_time = 150, \ + .supply_name = _supply, \ + .ops = &fan53880_ops, \ + } + +static const struct regulator_desc fan53880_regulators[] = { + FAN53880_LDO(1, "VIN12", 2800000), + FAN53880_LDO(2, "VIN12", 2800000), + FAN53880_LDO(3, "VIN3", 1800000), + FAN53880_LDO(4, "VIN4", 1800000), + [FAN53880_BUCK] = { + .name = "BUCK", + .of_match = of_match_ptr("BUCK"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .linear_ranges = (struct linear_range[]) { + REGULATOR_LINEAR_RANGE(1100000, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(600000, 0x1f, 0xf7, 12500), + }, + .n_linear_ranges = 2, + .vsel_reg = FAN53880_BUCKVOUT, + .vsel_mask = 0x7f, + .enable_reg = FAN53880_ENABLE, + .enable_mask = 0x10, + .enable_time = 480, + .supply_name = "PVIN", + .ops = &fan53880_ops, + }, + [FAN53880_BOOST] = { + .name = "BOOST", + .of_match = of_match_ptr("BOOST"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .linear_ranges = (struct linear_range[]) { + REGULATOR_LINEAR_RANGE(5000000, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(3000000, 0x4, 0x70, 25000), + }, + .n_linear_ranges = 2, + .vsel_reg = FAN53880_BOOSTVOUT, + .vsel_mask = 0x7f, + .enable_reg = FAN53880_ENABLE_BOOST, + .enable_mask = 0xff, + .enable_time = 580, + .supply_name = "PVIN", + .ops = &fan53880_ops, + }, +}; + +static const struct regmap_config fan53880_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = FAN53880_ENABLE_BOOST, +}; + +static int fan53880_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct regulator_config config = { }; + struct regulator_dev *rdev; + struct regmap *regmap; + int i, ret; + unsigned int data; + + regmap = devm_regmap_init_i2c(i2c, &fan53880_regmap); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); + return ret; + } + + ret = regmap_read(regmap, FAN53880_PRODUCT_ID, &data); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to read PRODUCT_ID: %d\n", ret); + return ret; + } + if (data != FAN53880_ID) { + dev_err(&i2c->dev, "Unsupported device id: 0x%x.\n", data); + return -ENODEV; + } + + config.dev = &i2c->dev; + config.init_data = NULL; + + for (i = 0; i < ARRAY_SIZE(fan53880_regulators); i++) { + rdev = devm_regulator_register(&i2c->dev, + &fan53880_regulators[i], + &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(&i2c->dev, "Failed to register %s: %d\n", + fan53880_regulators[i].name, ret); + return ret; + } + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id fan53880_dt_ids[] = { + { .compatible = "onnn,fan53880", }, + {} +}; +MODULE_DEVICE_TABLE(of, fan53880_dt_ids); +#endif + +static const struct i2c_device_id fan53880_i2c_id[] = { + { "fan53880", }, + {} +}; +MODULE_DEVICE_TABLE(i2c, fan53880_i2c_id); + +static struct i2c_driver fan53880_regulator_driver = { + .driver = { + .name = "fan53880", + .of_match_table = of_match_ptr(fan53880_dt_ids), + }, + .probe = fan53880_i2c_probe, + .id_table = fan53880_i2c_id, +}; +module_i2c_driver(fan53880_regulator_driver); + +MODULE_DESCRIPTION("FAN53880 PMIC voltage regulator driver"); +MODULE_AUTHOR("Christoph Fritz <chf.fritz@googlemail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index bc0bbd99e98d..d54830e48b8d 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -210,7 +210,7 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) /* * The signal will be inverted by the GPIO core if flagged so in the - * decriptor. + * descriptor. */ if (config->enabled_at_boot) gflags = GPIOD_OUT_HIGH; diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 110ee6fe76c4..5927d4f3eabd 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -148,6 +148,13 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np, config->supply_name = config->init_data->constraints.name; + if (config->init_data->constraints.boot_on) + config->enabled_at_boot = true; + + /* + * Do not use: undocumented device tree property. + * This is kept around solely for device tree ABI stability. + */ if (of_property_read_bool(np, "enable-at-boot")) config->enabled_at_boot = true; @@ -311,7 +318,7 @@ static int gpio_regulator_probe(struct platform_device *pdev) /* * The signal will be inverted by the GPIO core if flagged so in the - * decriptor. + * descriptor. */ if (config->enabled_at_boot) gflags = GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE; diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c index 66219d8dfc1a..dc631c1a46b4 100644 --- a/drivers/regulator/hi6421-regulator.c +++ b/drivers/regulator/hi6421-regulator.c @@ -5,7 +5,7 @@ // Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd. // http://www.hisilicon.com // Copyright (c) <2013-2014> Linaro Ltd. -// http://www.linaro.org +// https://www.linaro.org // // Author: Guodong Xu <guodong.xu@linaro.org> diff --git a/drivers/regulator/hi6421v530-regulator.c b/drivers/regulator/hi6421v530-regulator.c index 06ae65199afd..988115f9b594 100644 --- a/drivers/regulator/hi6421v530-regulator.c +++ b/drivers/regulator/hi6421v530-regulator.c @@ -5,7 +5,7 @@ // Copyright (c) <2017> HiSilicon Technologies Co., Ltd. // http://www.hisilicon.com // Copyright (c) <2017> Linaro Ltd. -// http://www.linaro.org +// https://www.linaro.org // // Author: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com> // Guodong Xu <guodong.xu@linaro.org> diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c index fe049b67e7d5..c38387e0fbb2 100644 --- a/drivers/regulator/lp873x-regulator.c +++ b/drivers/regulator/lp873x-regulator.c @@ -1,7 +1,7 @@ /* * Regulator driver for LP873X PMIC * - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version 2 as diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c index 5d525dacf959..eeab9d3c824b 100644 --- a/drivers/regulator/lp87565-regulator.c +++ b/drivers/regulator/lp87565-regulator.c @@ -2,7 +2,7 @@ /* * Regulator driver for LP87565 PMIC * - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include <linux/module.h> @@ -11,8 +11,8 @@ #include <linux/mfd/lp87565.h> -#define LP87565_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \ - _delay, _lr, _cr) \ +#define LP87565_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, \ + _er, _em, _ev, _delay, _lr, _cr) \ [_id] = { \ .desc = { \ .name = _name, \ @@ -28,6 +28,7 @@ .vsel_mask = _vm, \ .enable_reg = _er, \ .enable_mask = _em, \ + .enable_val = _ev, \ .ramp_delay = _delay, \ .linear_ranges = _lr, \ .n_linear_ranges = ARRAY_SIZE(_lr), \ @@ -121,38 +122,54 @@ static const struct lp87565_regulator regulators[] = { LP87565_REGULATOR("BUCK0", LP87565_BUCK_0, "buck0", lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1, + LP87565_BUCK_CTRL_1_EN | + LP87565_BUCK_CTRL_1_EN_PIN_CTRL, LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), LP87565_REGULATOR("BUCK1", LP87565_BUCK_1, "buck1", lp87565_buck_ops, 256, LP87565_REG_BUCK1_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK1_CTRL_1, + LP87565_BUCK_CTRL_1_EN | + LP87565_BUCK_CTRL_1_EN_PIN_CTRL, LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK1_CTRL_2), LP87565_REGULATOR("BUCK2", LP87565_BUCK_2, "buck2", lp87565_buck_ops, 256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK2_CTRL_1, + LP87565_BUCK_CTRL_1_EN | + LP87565_BUCK_CTRL_1_EN_PIN_CTRL, LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2), LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops, 256, LP87565_REG_BUCK3_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK3_CTRL_1, + LP87565_BUCK_CTRL_1_EN | + LP87565_BUCK_CTRL_1_EN_PIN_CTRL, LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK3_CTRL_2), LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1, LP87565_BUCK_CTRL_1_EN | + LP87565_BUCK_CTRL_1_EN_PIN_CTRL | + LP87565_BUCK_CTRL_1_FPWM_MP_0_2, + LP87565_BUCK_CTRL_1_EN | LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops, 256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK2_CTRL_1, + LP87565_BUCK_CTRL_1_EN | + LP87565_BUCK_CTRL_1_EN_PIN_CTRL, LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2), LP87565_REGULATOR("BUCK3210", LP87565_BUCK_3210, "buck3210", lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1, LP87565_BUCK_CTRL_1_EN | + LP87565_BUCK_CTRL_1_EN_PIN_CTRL | + LP87565_BUCK_CTRL_1_FPWM_MP_0_2, + LP87565_BUCK_CTRL_1_EN | LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), }; diff --git a/drivers/regulator/ltc3676.c b/drivers/regulator/ltc3676.c index e12e52c69e52..093b3e4a6303 100644 --- a/drivers/regulator/ltc3676.c +++ b/drivers/regulator/ltc3676.c @@ -221,7 +221,7 @@ static const struct regulator_ops ltc3676_fixed_regulator_ops = { #define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit) \ LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0) -static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = { +static const struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = { LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A), LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A), LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A), diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c index 07a150c9bbf2..e34face736f4 100644 --- a/drivers/regulator/max14577-regulator.c +++ b/drivers/regulator/max14577-regulator.c @@ -155,7 +155,7 @@ static const struct regulator_desc max77836_supported_regulators[] = { [MAX77836_LDO2] = MAX77836_LDO_REG(2), }; -/** +/* * Registers for regulators of max77836 use different I2C slave addresses so * different regmaps must be used for them. * diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c index 96dc0eea7659..1a6fd68f3fb1 100644 --- a/drivers/regulator/max8907-regulator.c +++ b/drivers/regulator/max8907-regulator.c @@ -109,7 +109,7 @@ struct max8907_regulator { static const struct regulator_ops max8907_mbatt_ops = { }; -static struct regulator_ops max8907_ldo_ops = { +static const struct regulator_ops max8907_ldo_ops = { .list_voltage = regulator_list_voltage_linear, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, @@ -128,7 +128,7 @@ static const struct regulator_ops max8907_fixed_ops = { .list_voltage = regulator_list_voltage_linear, }; -static struct regulator_ops max8907_out5v_ops = { +static const struct regulator_ops max8907_out5v_ops = { .list_voltage = regulator_list_voltage_linear, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -145,7 +145,7 @@ static const struct regulator_ops max8907_bbat_ops = { .get_voltage_sel = regulator_get_voltage_sel_regmap, }; -static struct regulator_desc max8907_regulators[] = { +static const struct regulator_desc max8907_regulators[] = { REG_MBATT(), REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000), REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500), diff --git a/drivers/regulator/max8997-regulator.c b/drivers/regulator/max8997-regulator.c index 4d2487279a0a..ba47a5e2fbcb 100644 --- a/drivers/regulator/max8997-regulator.c +++ b/drivers/regulator/max8997-regulator.c @@ -732,7 +732,7 @@ static int max8997_reg_disable_suspend(struct regulator_dev *rdev) return max8997_update_reg(i2c, reg, ~pattern, mask); } -static struct regulator_ops max8997_ldo_ops = { +static const struct regulator_ops max8997_ldo_ops = { .list_voltage = max8997_list_voltage, .is_enabled = max8997_reg_is_enabled, .enable = max8997_reg_enable, @@ -742,7 +742,7 @@ static struct regulator_ops max8997_ldo_ops = { .set_suspend_disable = max8997_reg_disable_suspend, }; -static struct regulator_ops max8997_buck_ops = { +static const struct regulator_ops max8997_buck_ops = { .list_voltage = max8997_list_voltage, .is_enabled = max8997_reg_is_enabled, .enable = max8997_reg_enable, @@ -753,7 +753,7 @@ static struct regulator_ops max8997_buck_ops = { .set_suspend_disable = max8997_reg_disable_suspend, }; -static struct regulator_ops max8997_fixedvolt_ops = { +static const struct regulator_ops max8997_fixedvolt_ops = { .list_voltage = max8997_list_voltage, .is_enabled = max8997_reg_is_enabled, .enable = max8997_reg_enable, @@ -761,7 +761,7 @@ static struct regulator_ops max8997_fixedvolt_ops = { .set_suspend_disable = max8997_reg_disable_suspend, }; -static struct regulator_ops max8997_safeout_ops = { +static const struct regulator_ops max8997_safeout_ops = { .list_voltage = regulator_list_voltage_table, .is_enabled = max8997_reg_is_enabled, .enable = max8997_reg_enable, @@ -771,7 +771,7 @@ static struct regulator_ops max8997_safeout_ops = { .set_suspend_disable = max8997_reg_disable_suspend, }; -static struct regulator_ops max8997_fixedstate_ops = { +static const struct regulator_ops max8997_fixedstate_ops = { .list_voltage = max8997_list_voltage_charger_cv, .get_voltage_sel = max8997_get_voltage_sel, .set_voltage = max8997_set_voltage_charger_cv, @@ -805,7 +805,7 @@ static int max8997_get_current_limit(struct regulator_dev *rdev) return max8997_list_voltage(rdev, sel); } -static struct regulator_ops max8997_charger_ops = { +static const struct regulator_ops max8997_charger_ops = { .is_enabled = max8997_reg_is_enabled, .enable = max8997_reg_enable, .disable = max8997_reg_disable, @@ -813,7 +813,7 @@ static struct regulator_ops max8997_charger_ops = { .set_current_limit = max8997_set_current_limit, }; -static struct regulator_ops max8997_charger_fixedstate_ops = { +static const struct regulator_ops max8997_charger_fixedstate_ops = { .get_current_limit = max8997_get_current_limit, .set_current_limit = max8997_set_current_limit, }; diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index 340413bba0c5..ac69bdd398cb 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -415,7 +415,7 @@ static int max8998_set_current_limit(struct regulator_dev *rdev, sel, rdev->desc->csel_mask); } -int max8998_get_current_limit(struct regulator_dev *rdev) +static int max8998_get_current_limit(struct regulator_dev *rdev) { struct max8998_data *max8998 = rdev_get_drvdata(rdev); struct i2c_client *i2c = max8998->iodev->i2c; diff --git a/drivers/regulator/mp886x.c b/drivers/regulator/mp886x.c index 1786f7162019..d3d475f717f4 100644 --- a/drivers/regulator/mp886x.c +++ b/drivers/regulator/mp886x.c @@ -206,8 +206,7 @@ static const struct regmap_config mp886x_regmap_config = { .val_bits = 8, }; -static int mp886x_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int mp886x_i2c_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct device_node *np = dev->of_node; @@ -280,7 +279,7 @@ static struct i2c_driver mp886x_regulator_driver = { .name = "mp886x-regulator", .of_match_table = of_match_ptr(mp886x_dt_ids), }, - .probe = mp886x_i2c_probe, + .probe_new = mp886x_i2c_probe, .id_table = mp886x_id, }; module_i2c_driver(mp886x_regulator_driver); diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c index 269c2a6028e8..0a30df5e414f 100644 --- a/drivers/regulator/mt6397-regulator.c +++ b/drivers/regulator/mt6397-regulator.c @@ -13,9 +13,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/mt6397-regulator.h> #include <linux/regulator/of_regulator.h> - -#define MT6397_BUCK_MODE_AUTO 0 -#define MT6397_BUCK_MODE_FORCE_PWM 1 +#include <dt-bindings/regulator/mediatek,mt6397-regulator.h> /* * MT6397 regulators' information @@ -55,6 +53,7 @@ struct mt6397_regulator_info { .vsel_mask = vosel_mask, \ .enable_reg = enreg, \ .enable_mask = BIT(0), \ + .of_map_mode = mt6397_map_mode, \ }, \ .qi = BIT(13), \ .vselon_reg = voselon, \ @@ -146,6 +145,18 @@ static const unsigned int ldo_volt_table7[] = { 1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000, }; +static unsigned int mt6397_map_mode(unsigned int mode) +{ + switch (mode) { + case MT6397_BUCK_MODE_AUTO: + return REGULATOR_MODE_NORMAL; + case MT6397_BUCK_MODE_FORCE_PWM: + return REGULATOR_MODE_FAST; + default: + return REGULATOR_MODE_INVALID; + } +} + static int mt6397_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode) { diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 87637eb6bcbc..06c0b15fe4c0 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -532,7 +532,7 @@ static bool of_coupling_find_node(struct device_node *src, /** * of_check_coupling_data - Parse rdev's coupling properties and check data * consistency - * @rdev - pointer to regulator_dev whose data is checked + * @rdev: pointer to regulator_dev whose data is checked * * Function checks if all the following conditions are met: * - rdev's max_spread is greater than 0 diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c index bfc15dd3f730..4eccf12f39de 100644 --- a/drivers/regulator/pbias-regulator.c +++ b/drivers/regulator/pbias-regulator.c @@ -1,7 +1,7 @@ /* * pbias-regulator.c * - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ * Author: Balaji T K <balajitk@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c new file mode 100644 index 000000000000..eb5822bf53e0 --- /dev/null +++ b/drivers/regulator/pca9450-regulator.c @@ -0,0 +1,833 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020 NXP. + * NXP PCA9450 pmic driver + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regulator/pca9450.h> + +struct pc9450_dvs_config { + unsigned int run_reg; /* dvs0 */ + unsigned int run_mask; + unsigned int standby_reg; /* dvs1 */ + unsigned int standby_mask; +}; + +struct pca9450_regulator_desc { + struct regulator_desc desc; + const struct pc9450_dvs_config dvs; +}; + +struct pca9450 { + struct device *dev; + struct regmap *regmap; + enum pca9450_chip_type type; + unsigned int rcnt; + int irq; +}; + +static const struct regmap_range pca9450_status_range = { + .range_min = PCA9450_REG_INT1, + .range_max = PCA9450_REG_PWRON_STAT, +}; + +static const struct regmap_access_table pca9450_volatile_regs = { + .yes_ranges = &pca9450_status_range, + .n_yes_ranges = 1, +}; + +static const struct regmap_config pca9450_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &pca9450_volatile_regs, + .max_register = PCA9450_MAX_REGISTER - 1, + .cache_type = REGCACHE_RBTREE, +}; + +/* + * BUCK1/2/3 + * BUCK1RAM[1:0] BUCK1 DVS ramp rate setting + * 00: 25mV/1usec + * 01: 25mV/2usec + * 10: 25mV/4usec + * 11: 25mV/8usec + */ +static int pca9450_dvs_set_ramp_delay(struct regulator_dev *rdev, + int ramp_delay) +{ + int id = rdev_get_id(rdev); + unsigned int ramp_value; + + switch (ramp_delay) { + case 1 ... 3125: + ramp_value = BUCK1_RAMP_3P125MV; + break; + case 3126 ... 6250: + ramp_value = BUCK1_RAMP_6P25MV; + break; + case 6251 ... 12500: + ramp_value = BUCK1_RAMP_12P5MV; + break; + case 12501 ... 25000: + ramp_value = BUCK1_RAMP_25MV; + break; + default: + ramp_value = BUCK1_RAMP_25MV; + } + + return regmap_update_bits(rdev->regmap, PCA9450_REG_BUCK1CTRL + id * 3, + BUCK1_RAMP_MASK, ramp_value << 6); +} + +static struct regulator_ops pca9450_dvs_buck_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = pca9450_dvs_set_ramp_delay, +}; + +static struct regulator_ops pca9450_buck_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static struct regulator_ops pca9450_ldo_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +/* + * BUCK1/2/3 + * 0.60 to 2.1875V (12.5mV step) + */ +static const struct linear_range pca9450_dvs_buck_volts[] = { + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500), +}; + +/* + * BUCK4/5/6 + * 0.6V to 3.4V (25mV step) + */ +static const struct linear_range pca9450_buck_volts[] = { + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x70, 25000), + REGULATOR_LINEAR_RANGE(3400000, 0x71, 0x7F, 0), +}; + +/* + * LDO1 + * 1.6 to 3.3V () + */ +static const struct linear_range pca9450_ldo1_volts[] = { + REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000), + REGULATOR_LINEAR_RANGE(3000000, 0x04, 0x07, 100000), +}; + +/* + * LDO2 + * 0.8 to 1.15V (50mV step) + */ +static const struct linear_range pca9450_ldo2_volts[] = { + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x07, 50000), +}; + +/* + * LDO3/4 + * 0.8 to 3.3V (100mV step) + */ +static const struct linear_range pca9450_ldo34_volts[] = { + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x19, 100000), + REGULATOR_LINEAR_RANGE(3300000, 0x1A, 0x1F, 0), +}; + +/* + * LDO5 + * 1.8 to 3.3V (100mV step) + */ +static const struct linear_range pca9450_ldo5_volts[] = { + REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), +}; + +static int buck_set_dvs(const struct regulator_desc *desc, + struct device_node *np, struct regmap *regmap, + char *prop, unsigned int reg, unsigned int mask) +{ + int ret, i; + uint32_t uv; + + ret = of_property_read_u32(np, prop, &uv); + if (ret == -EINVAL) + return 0; + else if (ret) + return ret; + + for (i = 0; i < desc->n_voltages; i++) { + ret = regulator_desc_list_voltage_linear_range(desc, i); + if (ret < 0) + continue; + if (ret == uv) { + i <<= ffs(desc->vsel_mask) - 1; + ret = regmap_update_bits(regmap, reg, mask, i); + break; + } + } + + return ret; +} + +static int pca9450_set_dvs_levels(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + struct pca9450_regulator_desc *data = container_of(desc, + struct pca9450_regulator_desc, desc); + const struct pc9450_dvs_config *dvs = &data->dvs; + unsigned int reg, mask; + char *prop; + int i, ret = 0; + + for (i = 0; i < PCA9450_DVS_LEVEL_MAX; i++) { + switch (i) { + case PCA9450_DVS_LEVEL_RUN: + prop = "nxp,dvs-run-voltage"; + reg = dvs->run_reg; + mask = dvs->run_mask; + break; + case PCA9450_DVS_LEVEL_STANDBY: + prop = "nxp,dvs-standby-voltage"; + reg = dvs->standby_reg; + mask = dvs->standby_mask; + break; + default: + return -EINVAL; + } + + ret = buck_set_dvs(desc, np, cfg->regmap, prop, reg, mask); + if (ret) + break; + } + + return ret; +} + +static const struct pca9450_regulator_desc pca9450a_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK1, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, + .vsel_mask = BUCK1OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK1CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, + .run_mask = BUCK1OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, + .standby_mask = BUCK1OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK2, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, + .vsel_mask = BUCK2OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK2CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, + .run_mask = BUCK2OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, + .standby_mask = BUCK2OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck3", + .of_match = of_match_ptr("BUCK3"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK3, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK3_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK3OUT_DVS0, + .vsel_mask = BUCK3OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK3CTRL, + .enable_mask = BUCK3_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK3OUT_DVS0, + .run_mask = BUCK3OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK3OUT_DVS1, + .standby_mask = BUCK3OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK4, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK4OUT, + .vsel_mask = BUCK4OUT_MASK, + .enable_reg = PCA9450_REG_BUCK4CTRL, + .enable_mask = BUCK4_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK5, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK5OUT, + .vsel_mask = BUCK5OUT_MASK, + .enable_reg = PCA9450_REG_BUCK5CTRL, + .enable_mask = BUCK5_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK6, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK6OUT, + .vsel_mask = BUCK6OUT_MASK, + .enable_reg = PCA9450_REG_BUCK6CTRL, + .enable_mask = BUCK6_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO1, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), + .vsel_reg = PCA9450_REG_LDO1CTRL, + .vsel_mask = LDO1OUT_MASK, + .enable_reg = PCA9450_REG_LDO1CTRL, + .enable_mask = LDO1_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO2, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo2_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts), + .vsel_reg = PCA9450_REG_LDO2CTRL, + .vsel_mask = LDO2OUT_MASK, + .enable_reg = PCA9450_REG_LDO2CTRL, + .enable_mask = LDO2_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO3, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO3CTRL, + .vsel_mask = LDO3OUT_MASK, + .enable_reg = PCA9450_REG_LDO3CTRL, + .enable_mask = LDO3_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO4, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO4CTRL, + .vsel_mask = LDO4OUT_MASK, + .enable_reg = PCA9450_REG_LDO4CTRL, + .enable_mask = LDO4_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO5, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), + .vsel_reg = PCA9450_REG_LDO5CTRL_H, + .vsel_mask = LDO5HOUT_MASK, + .enable_reg = PCA9450_REG_LDO5CTRL_H, + .enable_mask = LDO5H_EN_MASK, + .owner = THIS_MODULE, + }, + }, +}; + +/* + * Buck3 removed on PCA9450B and connected with Buck1 internal for dual phase + * on PCA9450C as no Buck3. + */ +static const struct pca9450_regulator_desc pca9450bc_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK1, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, + .vsel_mask = BUCK1OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK1CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, + .run_mask = BUCK1OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, + .standby_mask = BUCK1OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK2, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, + .vsel_mask = BUCK2OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK2CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, + .run_mask = BUCK2OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, + .standby_mask = BUCK2OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK4, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK4OUT, + .vsel_mask = BUCK4OUT_MASK, + .enable_reg = PCA9450_REG_BUCK4CTRL, + .enable_mask = BUCK4_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK5, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK5OUT, + .vsel_mask = BUCK5OUT_MASK, + .enable_reg = PCA9450_REG_BUCK5CTRL, + .enable_mask = BUCK5_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK6, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK6OUT, + .vsel_mask = BUCK6OUT_MASK, + .enable_reg = PCA9450_REG_BUCK6CTRL, + .enable_mask = BUCK6_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO1, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), + .vsel_reg = PCA9450_REG_LDO1CTRL, + .vsel_mask = LDO1OUT_MASK, + .enable_reg = PCA9450_REG_LDO1CTRL, + .enable_mask = LDO1_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO2, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo2_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts), + .vsel_reg = PCA9450_REG_LDO2CTRL, + .vsel_mask = LDO2OUT_MASK, + .enable_reg = PCA9450_REG_LDO2CTRL, + .enable_mask = LDO2_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO3, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO3CTRL, + .vsel_mask = LDO3OUT_MASK, + .enable_reg = PCA9450_REG_LDO3CTRL, + .enable_mask = LDO3_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO4, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO4CTRL, + .vsel_mask = LDO4OUT_MASK, + .enable_reg = PCA9450_REG_LDO4CTRL, + .enable_mask = LDO4_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO5, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), + .vsel_reg = PCA9450_REG_LDO5CTRL_H, + .vsel_mask = LDO5HOUT_MASK, + .enable_reg = PCA9450_REG_LDO5CTRL_H, + .enable_mask = LDO5H_EN_MASK, + .owner = THIS_MODULE, + }, + }, +}; + +static irqreturn_t pca9450_irq_handler(int irq, void *data) +{ + struct pca9450 *pca9450 = data; + struct regmap *regmap = pca9450->regmap; + unsigned int status; + int ret; + + ret = regmap_read(regmap, PCA9450_REG_INT1, &status); + if (ret < 0) { + dev_err(pca9450->dev, + "Failed to read INT1(%d)\n", ret); + return IRQ_NONE; + } + + if (status & IRQ_PWRON) + dev_warn(pca9450->dev, "PWRON interrupt.\n"); + + if (status & IRQ_WDOGB) + dev_warn(pca9450->dev, "WDOGB interrupt.\n"); + + if (status & IRQ_VR_FLT1) + dev_warn(pca9450->dev, "VRFLT1 interrupt.\n"); + + if (status & IRQ_VR_FLT2) + dev_warn(pca9450->dev, "VRFLT2 interrupt.\n"); + + if (status & IRQ_LOWVSYS) + dev_warn(pca9450->dev, "LOWVSYS interrupt.\n"); + + if (status & IRQ_THERM_105) + dev_warn(pca9450->dev, "IRQ_THERM_105 interrupt.\n"); + + if (status & IRQ_THERM_125) + dev_warn(pca9450->dev, "IRQ_THERM_125 interrupt.\n"); + + return IRQ_HANDLED; +} + +static int pca9450_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + enum pca9450_chip_type type = (unsigned int)(uintptr_t) + of_device_get_match_data(&i2c->dev); + const struct pca9450_regulator_desc *regulator_desc; + struct regulator_config config = { }; + struct pca9450 *pca9450; + unsigned int device_id, i; + int ret; + + if (!i2c->irq) { + dev_err(&i2c->dev, "No IRQ configured?\n"); + return -EINVAL; + } + + pca9450 = devm_kzalloc(&i2c->dev, sizeof(struct pca9450), GFP_KERNEL); + if (!pca9450) + return -ENOMEM; + + switch (type) { + case PCA9450_TYPE_PCA9450A: + regulator_desc = pca9450a_regulators; + pca9450->rcnt = ARRAY_SIZE(pca9450a_regulators); + break; + case PCA9450_TYPE_PCA9450BC: + regulator_desc = pca9450bc_regulators; + pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators); + break; + default: + dev_err(&i2c->dev, "Unknown device type"); + return -EINVAL; + } + + pca9450->irq = i2c->irq; + pca9450->type = type; + pca9450->dev = &i2c->dev; + + dev_set_drvdata(&i2c->dev, pca9450); + + pca9450->regmap = devm_regmap_init_i2c(i2c, + &pca9450_regmap_config); + if (IS_ERR(pca9450->regmap)) { + dev_err(&i2c->dev, "regmap initialization failed\n"); + return PTR_ERR(pca9450->regmap); + } + + ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID, &device_id); + if (ret) { + dev_err(&i2c->dev, "Read device id error\n"); + return ret; + } + + /* Check your board and dts for match the right pmic */ + if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) || + ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) { + dev_err(&i2c->dev, "Device id(%x) mismatched\n", + device_id >> 4); + return -EINVAL; + } + + for (i = 0; i < pca9450->rcnt; i++) { + const struct regulator_desc *desc; + struct regulator_dev *rdev; + const struct pca9450_regulator_desc *r; + + r = ®ulator_desc[i]; + desc = &r->desc; + + config.regmap = pca9450->regmap; + config.dev = pca9450->dev; + + rdev = devm_regulator_register(pca9450->dev, desc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(pca9450->dev, + "Failed to register regulator(%s): %d\n", + desc->name, ret); + return ret; + } + } + + ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL, + pca9450_irq_handler, + (IRQF_TRIGGER_FALLING | IRQF_ONESHOT), + "pca9450-irq", pca9450); + if (ret != 0) { + dev_err(pca9450->dev, "Failed to request IRQ: %d\n", + pca9450->irq); + return ret; + } + /* Unmask all interrupt except PWRON/WDOG/RSVD */ + ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK, + IRQ_VR_FLT1 | IRQ_VR_FLT2 | IRQ_LOWVSYS | + IRQ_THERM_105 | IRQ_THERM_125, + IRQ_PWRON | IRQ_WDOGB | IRQ_RSVD); + if (ret) { + dev_err(&i2c->dev, "Unmask irq error\n"); + return ret; + } + + dev_info(&i2c->dev, "%s probed.\n", + type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc"); + + return 0; +} + +static const struct of_device_id pca9450_of_match[] = { + { + .compatible = "nxp,pca9450a", + .data = (void *)PCA9450_TYPE_PCA9450A, + }, + { + .compatible = "nxp,pca9450b", + .data = (void *)PCA9450_TYPE_PCA9450BC, + }, + { + .compatible = "nxp,pca9450c", + .data = (void *)PCA9450_TYPE_PCA9450BC, + }, + { } +}; +MODULE_DEVICE_TABLE(of, pca9450_of_match); + +static struct i2c_driver pca9450_i2c_driver = { + .driver = { + .name = "nxp-pca9450", + .of_match_table = pca9450_of_match, + }, + .probe = pca9450_i2c_probe, +}; + +module_i2c_driver(pca9450_i2c_driver); + +MODULE_AUTHOR("Robin Gong <yibin.gong@nxp.com>"); +MODULE_DESCRIPTION("NXP PCA9450 Power Management IC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 4c8e8b472287..7e8ba9246167 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -128,7 +128,7 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); bool reg_has_ramp_delay; - unsigned int ramp_bits; + unsigned int ramp_bits = 0; int ret; switch (pfuze100->chip_id) { @@ -149,8 +149,11 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) } if (reg_has_ramp_delay) { - ramp_delay = 12500 / ramp_delay; - ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3); + if (ramp_delay > 0) { + ramp_delay = 12500 / ramp_delay; + ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3); + } + ret = regmap_update_bits(pfuze100->regmap, rdev->desc->vsel_reg + 4, 0xc0, ramp_bits << 6); diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index 638329bd0745..3234b118b53e 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -48,7 +48,7 @@ struct pwm_voltages { unsigned int dutycycle; }; -/** +/* * Voltage table call-backs */ static void pwm_regulator_init_state(struct regulator_dev *rdev) diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c new file mode 100644 index 000000000000..8c7dd1928380 --- /dev/null +++ b/drivers/regulator/qcom-labibb-regulator.c @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2020, The Linux Foundation. All rights reserved. + +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +#define REG_PERPH_TYPE 0x04 + +#define QCOM_LAB_TYPE 0x24 +#define QCOM_IBB_TYPE 0x20 + +#define PMI8998_LAB_REG_BASE 0xde00 +#define PMI8998_IBB_REG_BASE 0xdc00 + +#define REG_LABIBB_STATUS1 0x08 +#define REG_LABIBB_ENABLE_CTL 0x46 +#define LABIBB_STATUS1_VREG_OK_BIT BIT(7) +#define LABIBB_CONTROL_ENABLE BIT(7) + +#define LAB_ENABLE_CTL_MASK BIT(7) +#define IBB_ENABLE_CTL_MASK (BIT(7) | BIT(6)) + +#define LABIBB_OFF_ON_DELAY 1000 +#define LAB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 2) +#define IBB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 10) +#define LABIBB_POLL_ENABLED_TIME 1000 + +struct labibb_regulator { + struct regulator_desc desc; + struct device *dev; + struct regmap *regmap; + struct regulator_dev *rdev; + u16 base; + u8 type; +}; + +struct labibb_regulator_data { + const char *name; + u8 type; + u16 base; + struct regulator_desc *desc; +}; + +static struct regulator_ops qcom_labibb_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_desc pmi8998_lab_desc = { + .enable_mask = LAB_ENABLE_CTL_MASK, + .enable_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_ENABLE_CTL), + .enable_val = LABIBB_CONTROL_ENABLE, + .enable_time = LAB_ENABLE_TIME, + .poll_enabled_time = LABIBB_POLL_ENABLED_TIME, + .off_on_delay = LABIBB_OFF_ON_DELAY, + .owner = THIS_MODULE, + .type = REGULATOR_VOLTAGE, + .ops = &qcom_labibb_ops, +}; + +static struct regulator_desc pmi8998_ibb_desc = { + .enable_mask = IBB_ENABLE_CTL_MASK, + .enable_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_ENABLE_CTL), + .enable_val = LABIBB_CONTROL_ENABLE, + .enable_time = IBB_ENABLE_TIME, + .poll_enabled_time = LABIBB_POLL_ENABLED_TIME, + .off_on_delay = LABIBB_OFF_ON_DELAY, + .owner = THIS_MODULE, + .type = REGULATOR_VOLTAGE, + .ops = &qcom_labibb_ops, +}; + +static const struct labibb_regulator_data pmi8998_labibb_data[] = { + {"lab", QCOM_LAB_TYPE, PMI8998_LAB_REG_BASE, &pmi8998_lab_desc}, + {"ibb", QCOM_IBB_TYPE, PMI8998_IBB_REG_BASE, &pmi8998_ibb_desc}, + { }, +}; + +static const struct of_device_id qcom_labibb_match[] = { + { .compatible = "qcom,pmi8998-lab-ibb", .data = &pmi8998_labibb_data}, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_labibb_match); + +static int qcom_labibb_regulator_probe(struct platform_device *pdev) +{ + struct labibb_regulator *vreg; + struct device *dev = &pdev->dev; + struct regulator_config cfg = {}; + + const struct of_device_id *match; + const struct labibb_regulator_data *reg_data; + struct regmap *reg_regmap; + unsigned int type; + int ret; + + reg_regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!reg_regmap) { + dev_err(&pdev->dev, "Couldn't get parent's regmap\n"); + return -ENODEV; + } + + match = of_match_device(qcom_labibb_match, &pdev->dev); + if (!match) + return -ENODEV; + + for (reg_data = match->data; reg_data->name; reg_data++) { + + /* Validate if the type of regulator is indeed + * what's mentioned in DT. + */ + ret = regmap_read(reg_regmap, reg_data->base + REG_PERPH_TYPE, + &type); + if (ret < 0) { + dev_err(dev, + "Peripheral type read failed ret=%d\n", + ret); + return -EINVAL; + } + + if (WARN_ON((type != QCOM_LAB_TYPE) && (type != QCOM_IBB_TYPE)) || + WARN_ON(type != reg_data->type)) + return -EINVAL; + + vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), + GFP_KERNEL); + if (!vreg) + return -ENOMEM; + + vreg->regmap = reg_regmap; + vreg->dev = dev; + vreg->base = reg_data->base; + vreg->type = reg_data->type; + + memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc)); + vreg->desc.of_match = reg_data->name; + vreg->desc.name = reg_data->name; + + cfg.dev = vreg->dev; + cfg.driver_data = vreg; + cfg.regmap = vreg->regmap; + + vreg->rdev = devm_regulator_register(vreg->dev, &vreg->desc, + &cfg); + + if (IS_ERR(vreg->rdev)) { + dev_err(dev, "qcom_labibb: error registering %s : %d\n", + reg_data->name, ret); + return PTR_ERR(vreg->rdev); + } + } + + return 0; +} + +static struct platform_driver qcom_labibb_regulator_driver = { + .driver = { + .name = "qcom-lab-ibb-regulator", + .of_match_table = qcom_labibb_match, + }, + .probe = qcom_labibb_regulator_probe, +}; +module_platform_driver(qcom_labibb_regulator_driver); + +MODULE_DESCRIPTION("Qualcomm labibb driver"); +MODULE_AUTHOR("Nisha Kumari <nishakumari@codeaurora.org>"); +MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 79bdc129cb50..08dcc614efa7 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -22,9 +22,9 @@ /** * enum rpmh_regulator_type - supported RPMh accelerator types - * %VRM: RPMh VRM accelerator which supports voting on enable, voltage, + * @VRM: RPMh VRM accelerator which supports voting on enable, voltage, * and mode of LDO, SMPS, and BOB type PMIC regulators. - * %XOB: RPMh XOB accelerator which supports voting on the enable state + * @XOB: RPMh XOB accelerator which supports voting on the enable state * of PMIC regulators. */ enum rpmh_regulator_type { @@ -399,13 +399,13 @@ static const struct regulator_ops rpmh_regulator_xob_ops = { /** * rpmh_regulator_init_vreg() - initialize all attributes of an rpmh-regulator - * vreg: Pointer to the individual rpmh-regulator resource - * dev: Pointer to the top level rpmh-regulator PMIC device - * node: Pointer to the individual rpmh-regulator resource + * @vreg: Pointer to the individual rpmh-regulator resource + * @dev: Pointer to the top level rpmh-regulator PMIC device + * @node: Pointer to the individual rpmh-regulator resource * device node - * pmic_id: String used to identify the top level rpmh-regulator + * @pmic_id: String used to identify the top level rpmh-regulator * PMIC device on the board - * pmic_rpmh_data: Pointer to a null-terminated array of rpmh-regulator + * @pmic_rpmh_data: Pointer to a null-terminated array of rpmh-regulator * resources defined for the top level PMIC device * * Return: 0 on success, errno on failure diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index 0066f850f15d..7f9d66ac37ff 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -407,7 +407,7 @@ static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA) return ret; } -static struct regulator_ops uV_ops = { +static const struct regulator_ops uV_ops = { .list_voltage = regulator_list_voltage_linear_range, .set_voltage_sel = rpm_reg_set_uV_sel, @@ -420,7 +420,7 @@ static struct regulator_ops uV_ops = { .set_load = rpm_reg_set_load, }; -static struct regulator_ops mV_ops = { +static const struct regulator_ops mV_ops = { .list_voltage = regulator_list_voltage_linear_range, .set_voltage_sel = rpm_reg_set_mV_sel, @@ -433,7 +433,7 @@ static struct regulator_ops mV_ops = { .set_load = rpm_reg_set_load, }; -static struct regulator_ops switch_ops = { +static const struct regulator_ops switch_ops = { .enable = rpm_reg_switch_enable, .disable = rpm_reg_switch_disable, .is_enabled = rpm_reg_is_enabled, diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 7f5c318c8259..a87b56bc29fa 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -198,6 +198,15 @@ static const struct regulator_ops rpm_bob_ops = { .set_voltage = rpm_reg_set_voltage, }; +static const struct regulator_ops rpm_mp5496_ops = { + .enable = rpm_reg_enable, + .disable = rpm_reg_disable, + .is_enabled = rpm_reg_is_enabled, + .list_voltage = regulator_list_voltage_linear_range, + + .set_voltage = rpm_reg_set_voltage, +}; + static const struct regulator_desc pma8084_hfsmps = { .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), @@ -474,15 +483,6 @@ static const struct regulator_desc pmi8994_bby = { .ops = &rpm_bob_ops, }; -static const struct regulator_desc pmi8994_boost = { - .linear_ranges = (struct linear_range[]) { - REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000), - }, - .n_linear_ranges = 1, - .n_voltages = 31, - .ops = &rpm_smps_ldo_ops, -}; - static const struct regulator_desc pm8998_ftsmps = { .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000), @@ -595,6 +595,24 @@ static const struct regulator_desc pms405_pldo600 = { .ops = &rpm_smps_ldo_ops, }; +static const struct regulator_desc mp5496_smpa2 = { + .linear_ranges = (struct linear_range[]) { + REGULATOR_LINEAR_RANGE(725000, 0, 27, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 28, + .ops = &rpm_mp5496_ops, +}; + +static const struct regulator_desc mp5496_ldoa2 = { + .linear_ranges = (struct linear_range[]) { + REGULATOR_LINEAR_RANGE(1800000, 0, 60, 25000), + }, + .n_linear_ranges = 1, + .n_voltages = 61, + .ops = &rpm_mp5496_ops, +}; + struct rpm_regulator_data { const char *name; u32 type; @@ -603,6 +621,12 @@ struct rpm_regulator_data { const char *supply; }; +static const struct rpm_regulator_data rpm_mp5496_regulators[] = { + { "s2", QCOM_SMD_RPM_SMPA, 2, &mp5496_smpa2, "s2" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &mp5496_ldoa2, "l2" }, + {} +}; + static const struct rpm_regulator_data rpm_pm8841_regulators[] = { { "s1", QCOM_SMD_RPM_SMPB, 1, &pm8x41_hfsmps, "vdd_s1" }, { "s2", QCOM_SMD_RPM_SMPB, 2, &pm8841_ftsmps, "vdd_s2" }, @@ -901,6 +925,7 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = { }; static const struct of_device_id rpm_of_match[] = { + { .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators }, { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators }, { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators }, diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index 95737e4dd6bb..5ee7c5305d95 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -380,7 +380,7 @@ struct spmi_regulator_mapping { enum spmi_regulator_logical_type logical_type; u32 revision_min; u32 revision_max; - struct regulator_ops *ops; + const struct regulator_ops *ops; struct spmi_voltage_set_points *set_points; int hpm_min_load; }; @@ -1261,7 +1261,7 @@ spmi_regulator_saw_set_voltage(struct regulator_dev *rdev, unsigned selector) static struct regulator_ops spmi_saw_ops = {}; -static struct regulator_ops spmi_smps_ops = { +static const struct regulator_ops spmi_smps_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1276,7 +1276,7 @@ static struct regulator_ops spmi_smps_ops = { .set_pull_down = spmi_regulator_common_set_pull_down, }; -static struct regulator_ops spmi_ldo_ops = { +static const struct regulator_ops spmi_ldo_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1293,7 +1293,7 @@ static struct regulator_ops spmi_ldo_ops = { .set_soft_start = spmi_regulator_common_set_soft_start, }; -static struct regulator_ops spmi_ln_ldo_ops = { +static const struct regulator_ops spmi_ln_ldo_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1305,7 +1305,7 @@ static struct regulator_ops spmi_ln_ldo_ops = { .get_bypass = spmi_regulator_common_get_bypass, }; -static struct regulator_ops spmi_vs_ops = { +static const struct regulator_ops spmi_vs_ops = { .enable = spmi_regulator_vs_enable, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1316,7 +1316,7 @@ static struct regulator_ops spmi_vs_ops = { .get_mode = spmi_regulator_common_get_mode, }; -static struct regulator_ops spmi_boost_ops = { +static const struct regulator_ops spmi_boost_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1327,7 +1327,7 @@ static struct regulator_ops spmi_boost_ops = { .set_input_current_limit = spmi_regulator_set_ilim, }; -static struct regulator_ops spmi_ftsmps_ops = { +static const struct regulator_ops spmi_ftsmps_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1342,7 +1342,7 @@ static struct regulator_ops spmi_ftsmps_ops = { .set_pull_down = spmi_regulator_common_set_pull_down, }; -static struct regulator_ops spmi_ult_lo_smps_ops = { +static const struct regulator_ops spmi_ult_lo_smps_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1356,7 +1356,7 @@ static struct regulator_ops spmi_ult_lo_smps_ops = { .set_pull_down = spmi_regulator_common_set_pull_down, }; -static struct regulator_ops spmi_ult_ho_smps_ops = { +static const struct regulator_ops spmi_ult_ho_smps_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1371,7 +1371,7 @@ static struct regulator_ops spmi_ult_ho_smps_ops = { .set_pull_down = spmi_regulator_common_set_pull_down, }; -static struct regulator_ops spmi_ult_ldo_ops = { +static const struct regulator_ops spmi_ult_ldo_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1388,7 +1388,7 @@ static struct regulator_ops spmi_ult_ldo_ops = { .set_soft_start = spmi_regulator_common_set_soft_start, }; -static struct regulator_ops spmi_ftsmps426_ops = { +static const struct regulator_ops spmi_ftsmps426_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -1403,7 +1403,7 @@ static struct regulator_ops spmi_ftsmps426_ops = { .set_pull_down = spmi_regulator_common_set_pull_down, }; -static struct regulator_ops spmi_hfs430_ops = { +static const struct regulator_ops spmi_hfs430_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, diff --git a/drivers/regulator/qcom_usb_vbus-regulator.c b/drivers/regulator/qcom_usb_vbus-regulator.c new file mode 100644 index 000000000000..8ba947f3585f --- /dev/null +++ b/drivers/regulator/qcom_usb_vbus-regulator.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Qualcomm PMIC VBUS output regulator driver +// +// Copyright (c) 2020, The Linux Foundation. All rights reserved. + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regmap.h> + +#define CMD_OTG 0x40 +#define OTG_EN BIT(0) +#define OTG_CFG 0x53 +#define OTG_EN_SRC_CFG BIT(1) + +static const struct regulator_ops qcom_usb_vbus_reg_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_desc qcom_usb_vbus_rdesc = { + .name = "usb_vbus", + .ops = &qcom_usb_vbus_reg_ops, + .owner = THIS_MODULE, + .type = REGULATOR_VOLTAGE, +}; + +static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regulator_dev *rdev; + struct regmap *regmap; + struct regulator_config config = { }; + struct regulator_init_data *init_data; + int ret; + u32 base; + + ret = of_property_read_u32(dev->of_node, "reg", &base); + if (ret < 0) { + dev_err(dev, "no base address found\n"); + return ret; + } + + regmap = dev_get_regmap(dev->parent, NULL); + if (!regmap) { + dev_err(dev, "Failed to get regmap\n"); + return -ENOENT; + } + + init_data = of_get_regulator_init_data(dev, dev->of_node, + &qcom_usb_vbus_rdesc); + if (!init_data) + return -ENOMEM; + + qcom_usb_vbus_rdesc.enable_reg = base + CMD_OTG; + qcom_usb_vbus_rdesc.enable_mask = OTG_EN; + config.dev = dev; + config.init_data = init_data; + config.regmap = regmap; + + rdev = devm_regulator_register(dev, &qcom_usb_vbus_rdesc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(dev, "not able to register vbus reg %d\n", ret); + return ret; + } + + /* Disable HW logic for VBUS enable */ + regmap_update_bits(regmap, base + OTG_CFG, OTG_EN_SRC_CFG, 0); + + return 0; +} + +static const struct of_device_id qcom_usb_vbus_regulator_match[] = { + { .compatible = "qcom,pm8150b-vbus-reg" }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_usb_vbus_regulator_match); + +static struct platform_driver qcom_usb_vbus_regulator_driver = { + .driver = { + .name = "qcom-usb-vbus-regulator", + .of_match_table = qcom_usb_vbus_regulator_match, + }, + .probe = qcom_usb_vbus_regulator_probe, +}; +module_platform_driver(qcom_usb_vbus_regulator_driver); + +MODULE_DESCRIPTION("Qualcomm USB vbus regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c index adc9973d1b2f..73e0ab2baeaa 100644 --- a/drivers/regulator/stpmic1_regulator.c +++ b/drivers/regulator/stpmic1_regulator.c @@ -15,7 +15,7 @@ #include <dt-bindings/mfd/st,stpmic1.h> /** - * stpmic1 regulator description: this structure is used as driver data + * struct stpmic1 regulator description: this structure is used as driver data * @desc: regulator framework description * @mask_reset_reg: mask reset register address * @mask_reset_mask: mask rank and mask reset register mask diff --git a/drivers/regulator/sy8827n.c b/drivers/regulator/sy8827n.c new file mode 100644 index 000000000000..b207217f74d8 --- /dev/null +++ b/drivers/regulator/sy8827n.c @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// SY8827N regulator driver +// +// Copyright (C) 2020 Synaptics Incorporated +// +// Author: Jisheng Zhang <jszhang@kernel.org> + +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +#define SY8827N_VSEL0 0 +#define SY8827N_BUCK_EN (1 << 7) +#define SY8827N_MODE (1 << 6) +#define SY8827N_VSEL1 1 +#define SY8827N_CTRL 2 + +#define SY8827N_NVOLTAGES 64 +#define SY8827N_VSELMIN 600000 +#define SY8827N_VSELSTEP 12500 + +struct sy8827n_device_info { + struct device *dev; + struct regulator_desc desc; + struct regulator_init_data *regulator; + struct gpio_desc *en_gpio; + unsigned int vsel_reg; +}; + +static int sy8827n_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct sy8827n_device_info *di = rdev_get_drvdata(rdev); + + switch (mode) { + case REGULATOR_MODE_FAST: + regmap_update_bits(rdev->regmap, di->vsel_reg, + SY8827N_MODE, SY8827N_MODE); + break; + case REGULATOR_MODE_NORMAL: + regmap_update_bits(rdev->regmap, di->vsel_reg, + SY8827N_MODE, 0); + break; + default: + return -EINVAL; + } + return 0; +} + +static unsigned int sy8827n_get_mode(struct regulator_dev *rdev) +{ + struct sy8827n_device_info *di = rdev_get_drvdata(rdev); + u32 val; + int ret = 0; + + ret = regmap_read(rdev->regmap, di->vsel_reg, &val); + if (ret < 0) + return ret; + if (val & SY8827N_MODE) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static const struct regulator_ops sy8827n_regulator_ops = { + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_mode = sy8827n_set_mode, + .get_mode = sy8827n_get_mode, +}; + +static int sy8827n_regulator_register(struct sy8827n_device_info *di, + struct regulator_config *config) +{ + struct regulator_desc *rdesc = &di->desc; + struct regulator_dev *rdev; + + rdesc->name = "sy8827n-reg"; + rdesc->supply_name = "vin"; + rdesc->ops = &sy8827n_regulator_ops; + rdesc->type = REGULATOR_VOLTAGE; + rdesc->n_voltages = SY8827N_NVOLTAGES; + rdesc->enable_reg = di->vsel_reg; + rdesc->enable_mask = SY8827N_BUCK_EN; + rdesc->min_uV = SY8827N_VSELMIN; + rdesc->uV_step = SY8827N_VSELSTEP; + rdesc->vsel_reg = di->vsel_reg; + rdesc->vsel_mask = rdesc->n_voltages - 1; + rdesc->owner = THIS_MODULE; + + rdev = devm_regulator_register(di->dev, &di->desc, config); + return PTR_ERR_OR_ZERO(rdev); +} + +static const struct regmap_config sy8827n_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int sy8827n_i2c_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device_node *np = dev->of_node; + struct sy8827n_device_info *di; + struct regulator_config config = { }; + struct regmap *regmap; + int ret; + + di = devm_kzalloc(dev, sizeof(struct sy8827n_device_info), GFP_KERNEL); + if (!di) + return -ENOMEM; + + di->regulator = of_get_regulator_init_data(dev, np, &di->desc); + if (!di->regulator) { + dev_err(dev, "Platform data not found!\n"); + return -EINVAL; + } + + di->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(di->en_gpio)) + return PTR_ERR(di->en_gpio); + + if (of_property_read_bool(np, "silergy,vsel-state-high")) + di->vsel_reg = SY8827N_VSEL1; + else + di->vsel_reg = SY8827N_VSEL0; + + di->dev = dev; + + regmap = devm_regmap_init_i2c(client, &sy8827n_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to allocate regmap!\n"); + return PTR_ERR(regmap); + } + i2c_set_clientdata(client, di); + + config.dev = di->dev; + config.init_data = di->regulator; + config.regmap = regmap; + config.driver_data = di; + config.of_node = np; + + ret = sy8827n_regulator_register(di, &config); + if (ret < 0) + dev_err(dev, "Failed to register regulator!\n"); + return ret; +} + +static const struct of_device_id sy8827n_dt_ids[] = { + { + .compatible = "silergy,sy8827n", + }, + { } +}; +MODULE_DEVICE_TABLE(of, sy8827n_dt_ids); + +static const struct i2c_device_id sy8827n_id[] = { + { "sy8827n", }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, sy8827n_id); + +static struct i2c_driver sy8827n_regulator_driver = { + .driver = { + .name = "sy8827n-regulator", + .of_match_table = of_match_ptr(sy8827n_dt_ids), + }, + .probe_new = sy8827n_i2c_probe, + .id_table = sy8827n_id, +}; +module_i2c_driver(sy8827n_regulator_driver); + +MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>"); +MODULE_DESCRIPTION("SY8827N regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c index 5ca6d2130593..795d459ff3cf 100644 --- a/drivers/regulator/tps65023-regulator.c +++ b/drivers/regulator/tps65023-regulator.c @@ -3,7 +3,7 @@ * * Supports TPS65023 Regulator * - * Copyright (C) 2009 Texas Instrument Incorporated - http://www.ti.com/ + * Copyright (C) 2009 Texas Instrument Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c index d2a8f69b2665..eafbc2bb4b57 100644 --- a/drivers/regulator/tps6507x-regulator.c +++ b/drivers/regulator/tps6507x-regulator.c @@ -3,7 +3,7 @@ * * Regulator driver for TPS65073 PMIC * - * Copyright (C) 2009 Texas Instrument Incorporated - http://www.ti.com/ + * Copyright (C) 2009 Texas Instrument Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c index 9910e949373c..23528475a962 100644 --- a/drivers/regulator/tps65086-regulator.c +++ b/drivers/regulator/tps65086-regulator.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * * Author: Andrew F. Davis <afd@ti.com> * diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c index d27dbbafcf72..e88ed96f4744 100644 --- a/drivers/regulator/tps65217-regulator.c +++ b/drivers/regulator/tps65217-regulator.c @@ -3,7 +3,7 @@ * * Regulator driver for TPS65217 PMIC * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -124,7 +124,7 @@ static int tps65217_pmic_set_suspend_enable(struct regulator_dev *dev) struct tps65217 *tps = rdev_get_drvdata(dev); unsigned int rid = rdev_get_id(dev); - if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) + if (rid > TPS65217_LDO_4) return -EINVAL; return tps65217_clear_bits(tps, dev->desc->bypass_reg, @@ -137,7 +137,7 @@ static int tps65217_pmic_set_suspend_disable(struct regulator_dev *dev) struct tps65217 *tps = rdev_get_drvdata(dev); unsigned int rid = rdev_get_id(dev); - if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) + if (rid > TPS65217_LDO_4) return -EINVAL; if (!tps->strobes[rid]) @@ -254,6 +254,9 @@ static int tps65217_regulator_probe(struct platform_device *pdev) /* Store default strobe info */ ret = tps65217_reg_read(tps, regulators[i].bypass_reg, &val); + if (ret) + return ret; + tps->strobes[i] = val & regulators[i].bypass_mask; } diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index 05d13f807918..fa263545a70e 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -3,7 +3,7 @@ * * Regulator driver for TPS65218 PMIC * - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version 2 as @@ -128,7 +128,7 @@ static int tps65218_pmic_set_suspend_enable(struct regulator_dev *dev) struct tps65218 *tps = rdev_get_drvdata(dev); unsigned int rid = rdev_get_id(dev); - if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) + if (rid > TPS65218_LDO_1) return -EINVAL; return tps65218_clear_bits(tps, dev->desc->bypass_reg, @@ -141,7 +141,7 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev) struct tps65218 *tps = rdev_get_drvdata(dev); unsigned int rid = rdev_get_id(dev); - if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) + if (rid > TPS65218_LDO_1) return -EINVAL; /* diff --git a/drivers/regulator/tps65912-regulator.c b/drivers/regulator/tps65912-regulator.c index 15c79931ea89..63d6bbd4969b 100644 --- a/drivers/regulator/tps65912-regulator.c +++ b/drivers/regulator/tps65912-regulator.c @@ -1,7 +1,7 @@ /* * Regulator driver for TI TPS65912x PMICs * - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index ae5f0e7fce8b..2e7bfdf7c87b 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1216,11 +1216,11 @@ EXPORT_SYMBOL_GPL(wm8350_register_regulator); /** * wm8350_register_led - Register a WM8350 LED output * - * @param wm8350 The WM8350 device to configure. - * @param lednum LED device index to create. - * @param dcdc The DCDC to use for the LED. - * @param isink The ISINK to use for the LED. - * @param pdata Configuration for the LED. + * @wm8350: The WM8350 device to configure. + * @lednum: LED device index to create. + * @dcdc: The DCDC to use for the LED. + * @isink: The ISINK to use for the LED. + * @pdata: Configuration for the LED. * * The WM8350 supports the use of an ISINK together with a DCDC to * provide a power-efficient LED driver. This function registers the diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 4cb1fbb59722..e9fd13707721 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -234,9 +234,9 @@ static struct platform_driver wm8400_regulator_driver = { * the regulator API. It is intended to be called from the * platform_init() callback of the WM8400 MFD driver. * - * @param dev The WM8400 device to operate on. - * @param reg The regulator to control. - * @param initdata Regulator initdata for the regulator. + * @dev: The WM8400 device to operate on. + * @reg: The regulator to control. + * @initdata: Regulator initdata for the regulator. */ int wm8400_register_regulator(struct device *dev, int reg, struct regulator_init_data *initdata) diff --git a/include/dt-bindings/regulator/dlg,da9211-regulator.h b/include/dt-bindings/regulator/dlg,da9211-regulator.h new file mode 100644 index 000000000000..cdce2d54c8ba --- /dev/null +++ b/include/dt-bindings/regulator/dlg,da9211-regulator.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _DT_BINDINGS_REGULATOR_DLG_DA9211_H +#define _DT_BINDINGS_REGULATOR_DLG_DA9211_H + +/* + * These buck mode constants may be used to specify values in device tree + * properties (e.g. regulator-initial-mode, regulator-allowed-modes). + * A description of the following modes is in the manufacturers datasheet. + */ + +#define DA9211_BUCK_MODE_SLEEP 1 +#define DA9211_BUCK_MODE_SYNC 2 +#define DA9211_BUCK_MODE_AUTO 3 + +#endif diff --git a/include/dt-bindings/regulator/mediatek,mt6397-regulator.h b/include/dt-bindings/regulator/mediatek,mt6397-regulator.h new file mode 100644 index 000000000000..99869a8665cf --- /dev/null +++ b/include/dt-bindings/regulator/mediatek,mt6397-regulator.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _DT_BINDINGS_REGULATOR_MEDIATEK_MT6397_H_ +#define _DT_BINDINGS_REGULATOR_MEDIATEK_MT6397_H_ + +/* + * Buck mode constants which may be used in devicetree properties (eg. + * regulator-initial-mode, regulator-allowed-modes). + * See the manufacturer's datasheet for more information on these modes. + */ + +#define MT6397_BUCK_MODE_AUTO 0 +#define MT6397_BUCK_MODE_FORCE_PWM 1 + +#endif diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 69210881ebac..91e77f53414d 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -5431,6 +5431,89 @@ struct ec_response_rollback_info { #define EC_CMD_AP_RESET 0x0125 /*****************************************************************************/ +/* Voltage regulator controls */ + +/* + * Get basic info of voltage regulator for given index. + * + * Returns the regulator name and supported voltage list in mV. + */ +#define EC_CMD_REGULATOR_GET_INFO 0x012C + +/* Maximum length of regulator name */ +#define EC_REGULATOR_NAME_MAX_LEN 16 + +/* Maximum length of the supported voltage list. */ +#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16 + +struct ec_params_regulator_get_info { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_info { + char name[EC_REGULATOR_NAME_MAX_LEN]; + uint16_t num_voltages; + uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT]; +} __ec_align2; + +/* + * Configure the regulator as enabled / disabled. + */ +#define EC_CMD_REGULATOR_ENABLE 0x012D + +struct ec_params_regulator_enable { + uint32_t index; + uint8_t enable; +} __ec_align4; + +/* + * Query if the regulator is enabled. + * + * Returns 1 if the regulator is enabled, 0 if not. + */ +#define EC_CMD_REGULATOR_IS_ENABLED 0x012E + +struct ec_params_regulator_is_enabled { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_is_enabled { + uint8_t enabled; +} __ec_align1; + +/* + * Set voltage for the voltage regulator within the range specified. + * + * The driver should select the voltage in range closest to min_mv. + * + * Also note that this might be called before the regulator is enabled, and the + * setting should be in effect after the regulator is enabled. + */ +#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012F + +struct ec_params_regulator_set_voltage { + uint32_t index; + uint32_t min_mv; + uint32_t max_mv; +} __ec_align4; + +/* + * Get the currently configured voltage for the voltage regulator. + * + * Note that this might be called before the regulator is enabled, and this + * should return the configured output voltage if the regulator is enabled. + */ +#define EC_CMD_REGULATOR_GET_VOLTAGE 0x0130 + +struct ec_params_regulator_get_voltage { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_voltage { + uint32_t voltage_mv; +} __ec_align4; + +/*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ /*****************************************************************************/ diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 6a92fd3105a3..2024944fd2f7 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -32,10 +32,12 @@ #define __LINUX_REGULATOR_CONSUMER_H_ #include <linux/err.h> +#include <linux/suspend.h> struct device; struct notifier_block; struct regmap; +struct regulator_dev; /* * Regulator operating modes. @@ -277,6 +279,14 @@ int regulator_unregister_notifier(struct regulator *regulator, void devm_regulator_unregister_notifier(struct regulator *regulator, struct notifier_block *nb); +/* regulator suspend */ +int regulator_suspend_enable(struct regulator_dev *rdev, + suspend_state_t state); +int regulator_suspend_disable(struct regulator_dev *rdev, + suspend_state_t state); +int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV, + int max_uV, suspend_state_t state); + /* driver data - core doesn't touch */ void *regulator_get_drvdata(struct regulator *regulator); void regulator_set_drvdata(struct regulator *regulator, void *data); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 7eb9fea8e482..8539f34ae42b 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -117,7 +117,7 @@ enum regulator_status { * suspended. * @set_suspend_mode: Set the operating mode for the regulator when the * system is suspended. - * + * @resume: Resume operation of suspended regulator. * @set_pull_down: Configure the regulator to pull down when the regulator * is disabled. * @@ -305,6 +305,9 @@ enum regulator_type { * @enable_time: Time taken for initial enable of regulator (in uS). * @off_on_delay: guard time (in uS), before re-enabling a regulator * + * @poll_enabled_time: The polling interval (in uS) to use while checking that + * the regulator was actually enabled. Max upto enable_time. + * * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode */ struct regulator_desc { @@ -372,6 +375,8 @@ struct regulator_desc { unsigned int off_on_delay; + unsigned int poll_enabled_time; + unsigned int (*of_map_mode)(unsigned int mode); }; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index a84cc8879c3e..8a56f033b6cd 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -101,6 +101,7 @@ struct regulator_state { * @system_load: Load that isn't captured by any consumer requests. * * @max_spread: Max possible spread between coupled regulators + * @max_uV_step: Max possible step change in voltage * @valid_modes_mask: Mask of modes which may be configured by consumers. * @valid_ops_mask: Operations which may be performed by consumers. * diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h new file mode 100644 index 000000000000..1bbd3014f906 --- /dev/null +++ b/include/linux/regulator/pca9450.h @@ -0,0 +1,219 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Copyright 2020 NXP. */ + +#ifndef __LINUX_REG_PCA9450_H__ +#define __LINUX_REG_PCA9450_H__ + +#include <linux/regmap.h> + +enum pca9450_chip_type { + PCA9450_TYPE_PCA9450A = 0, + PCA9450_TYPE_PCA9450BC, + PCA9450_TYPE_AMOUNT, +}; + +enum { + PCA9450_BUCK1 = 0, + PCA9450_BUCK2, + PCA9450_BUCK3, + PCA9450_BUCK4, + PCA9450_BUCK5, + PCA9450_BUCK6, + PCA9450_LDO1, + PCA9450_LDO2, + PCA9450_LDO3, + PCA9450_LDO4, + PCA9450_LDO5, + PCA9450_REGULATOR_CNT, +}; + +enum { + PCA9450_DVS_LEVEL_RUN = 0, + PCA9450_DVS_LEVEL_STANDBY, + PCA9450_DVS_LEVEL_MAX, +}; + +#define PCA9450_BUCK1_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK2_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK3_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK4_VOLTAGE_NUM 0x80 + +#define PCA9450_BUCK5_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK6_VOLTAGE_NUM 0x80 + +#define PCA9450_LDO1_VOLTAGE_NUM 0x08 +#define PCA9450_LDO2_VOLTAGE_NUM 0x08 +#define PCA9450_LDO3_VOLTAGE_NUM 0x20 +#define PCA9450_LDO4_VOLTAGE_NUM 0x20 +#define PCA9450_LDO5_VOLTAGE_NUM 0x10 + +enum { + PCA9450_REG_DEV_ID = 0x00, + PCA9450_REG_INT1 = 0x01, + PCA9450_REG_INT1_MSK = 0x02, + PCA9450_REG_STATUS1 = 0x03, + PCA9450_REG_STATUS2 = 0x04, + PCA9450_REG_PWRON_STAT = 0x05, + PCA9450_REG_SWRST = 0x06, + PCA9450_REG_PWRCTRL = 0x07, + PCA9450_REG_RESET_CTRL = 0x08, + PCA9450_REG_CONFIG1 = 0x09, + PCA9450_REG_CONFIG2 = 0x0A, + PCA9450_REG_BUCK123_DVS = 0x0C, + PCA9450_REG_BUCK1OUT_LIMIT = 0x0D, + PCA9450_REG_BUCK2OUT_LIMIT = 0x0E, + PCA9450_REG_BUCK3OUT_LIMIT = 0x0F, + PCA9450_REG_BUCK1CTRL = 0x10, + PCA9450_REG_BUCK1OUT_DVS0 = 0x11, + PCA9450_REG_BUCK1OUT_DVS1 = 0x12, + PCA9450_REG_BUCK2CTRL = 0x13, + PCA9450_REG_BUCK2OUT_DVS0 = 0x14, + PCA9450_REG_BUCK2OUT_DVS1 = 0x15, + PCA9450_REG_BUCK3CTRL = 0x16, + PCA9450_REG_BUCK3OUT_DVS0 = 0x17, + PCA9450_REG_BUCK3OUT_DVS1 = 0x18, + PCA9450_REG_BUCK4CTRL = 0x19, + PCA9450_REG_BUCK4OUT = 0x1A, + PCA9450_REG_BUCK5CTRL = 0x1B, + PCA9450_REG_BUCK5OUT = 0x1C, + PCA9450_REG_BUCK6CTRL = 0x1D, + PCA9450_REG_BUCK6OUT = 0x1E, + PCA9450_REG_LDO_AD_CTRL = 0x20, + PCA9450_REG_LDO1CTRL = 0x21, + PCA9450_REG_LDO2CTRL = 0x22, + PCA9450_REG_LDO3CTRL = 0x23, + PCA9450_REG_LDO4CTRL = 0x24, + PCA9450_REG_LDO5CTRL_L = 0x25, + PCA9450_REG_LDO5CTRL_H = 0x26, + PCA9450_REG_LOADSW_CTRL = 0x2A, + PCA9450_REG_VRFLT1_STS = 0x2B, + PCA9450_REG_VRFLT2_STS = 0x2C, + PCA9450_REG_VRFLT1_MASK = 0x2D, + PCA9450_REG_VRFLT2_MASK = 0x2E, + PCA9450_MAX_REGISTER = 0x2F, +}; + +/* PCA9450 BUCK ENMODE bits */ +#define BUCK_ENMODE_OFF 0x00 +#define BUCK_ENMODE_ONREQ 0x01 +#define BUCK_ENMODE_ONREQ_STBYREQ 0x02 +#define BUCK_ENMODE_ON 0x03 + +/* PCA9450_REG_BUCK1_CTRL bits */ +#define BUCK1_RAMP_MASK 0xC0 +#define BUCK1_RAMP_25MV 0x0 +#define BUCK1_RAMP_12P5MV 0x1 +#define BUCK1_RAMP_6P25MV 0x2 +#define BUCK1_RAMP_3P125MV 0x3 +#define BUCK1_DVS_CTRL 0x10 +#define BUCK1_AD 0x08 +#define BUCK1_FPWM 0x04 +#define BUCK1_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK2_CTRL bits */ +#define BUCK2_RAMP_MASK 0xC0 +#define BUCK2_RAMP_25MV 0x0 +#define BUCK2_RAMP_12P5MV 0x1 +#define BUCK2_RAMP_6P25MV 0x2 +#define BUCK2_RAMP_3P125MV 0x3 +#define BUCK2_DVS_CTRL 0x10 +#define BUCK2_AD 0x08 +#define BUCK2_FPWM 0x04 +#define BUCK2_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK3_CTRL bits */ +#define BUCK3_RAMP_MASK 0xC0 +#define BUCK3_RAMP_25MV 0x0 +#define BUCK3_RAMP_12P5MV 0x1 +#define BUCK3_RAMP_6P25MV 0x2 +#define BUCK3_RAMP_3P125MV 0x3 +#define BUCK3_DVS_CTRL 0x10 +#define BUCK3_AD 0x08 +#define BUCK3_FPWM 0x04 +#define BUCK3_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK4_CTRL bits */ +#define BUCK4_AD 0x08 +#define BUCK4_FPWM 0x04 +#define BUCK4_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK5_CTRL bits */ +#define BUCK5_AD 0x08 +#define BUCK5_FPWM 0x04 +#define BUCK5_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK6_CTRL bits */ +#define BUCK6_AD 0x08 +#define BUCK6_FPWM 0x04 +#define BUCK6_ENMODE_MASK 0x03 + +/* PCA9450_BUCK1OUT_DVS0 bits */ +#define BUCK1OUT_DVS0_MASK 0x7F +#define BUCK1OUT_DVS0_DEFAULT 0x14 + +/* PCA9450_BUCK1OUT_DVS1 bits */ +#define BUCK1OUT_DVS1_MASK 0x7F +#define BUCK1OUT_DVS1_DEFAULT 0x14 + +/* PCA9450_BUCK2OUT_DVS0 bits */ +#define BUCK2OUT_DVS0_MASK 0x7F +#define BUCK2OUT_DVS0_DEFAULT 0x14 + +/* PCA9450_BUCK2OUT_DVS1 bits */ +#define BUCK2OUT_DVS1_MASK 0x7F +#define BUCK2OUT_DVS1_DEFAULT 0x14 + +/* PCA9450_BUCK3OUT_DVS0 bits */ +#define BUCK3OUT_DVS0_MASK 0x7F +#define BUCK3OUT_DVS0_DEFAULT 0x14 + +/* PCA9450_BUCK3OUT_DVS1 bits */ +#define BUCK3OUT_DVS1_MASK 0x7F +#define BUCK3OUT_DVS1_DEFAULT 0x14 + +/* PCA9450_REG_BUCK4OUT bits */ +#define BUCK4OUT_MASK 0x7F +#define BUCK4OUT_DEFAULT 0x6C + +/* PCA9450_REG_BUCK5OUT bits */ +#define BUCK5OUT_MASK 0x7F +#define BUCK5OUT_DEFAULT 0x30 + +/* PCA9450_REG_BUCK6OUT bits */ +#define BUCK6OUT_MASK 0x7F +#define BUCK6OUT_DEFAULT 0x14 + +/* PCA9450_REG_LDO1_VOLT bits */ +#define LDO1_EN_MASK 0xC0 +#define LDO1OUT_MASK 0x07 + +/* PCA9450_REG_LDO2_VOLT bits */ +#define LDO2_EN_MASK 0xC0 +#define LDO2OUT_MASK 0x07 + +/* PCA9450_REG_LDO3_VOLT bits */ +#define LDO3_EN_MASK 0xC0 +#define LDO3OUT_MASK 0x0F + +/* PCA9450_REG_LDO4_VOLT bits */ +#define LDO4_EN_MASK 0xC0 +#define LDO4OUT_MASK 0x0F + +/* PCA9450_REG_LDO5_VOLT bits */ +#define LDO5L_EN_MASK 0xC0 +#define LDO5LOUT_MASK 0x0F + +#define LDO5H_EN_MASK 0xC0 +#define LDO5HOUT_MASK 0x0F + +/* PCA9450_REG_IRQ bits */ +#define IRQ_PWRON 0x80 +#define IRQ_WDOGB 0x40 +#define IRQ_RSVD 0x20 +#define IRQ_VR_FLT1 0x10 +#define IRQ_VR_FLT2 0x08 +#define IRQ_LOWVSYS 0x04 +#define IRQ_THERM_105 0x02 +#define IRQ_THERM_125 0x01 + +#endif /* __LINUX_REG_PCA9450_H__ */ |