diff options
30 files changed, 82 insertions, 572 deletions
diff --git a/Documentation/serial/driver b/Documentation/serial/driver index e9c0178cd202..ac7eabbf662a 100644 --- a/Documentation/serial/driver +++ b/Documentation/serial/driver @@ -107,8 +107,8 @@ hardware. indicate that the signal is permanently active. If RI is not available, the signal should not be indicated as active. - Locking: none. - Interrupts: caller dependent. + Locking: port->lock taken. + Interrupts: locally disabled. This call must not sleep stop_tx(port,tty_stop) diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 872085dea8a8..6efaa9293eef 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -506,7 +506,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_NR_UARTS=17 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index d28ebfa1070d..30fc03ed0cfb 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -662,7 +662,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_NR_UARTS=17 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 1700d7aec686..46c9511f3229 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -514,7 +514,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_NR_UARTS=13 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index b27980161c31..67aca6ccc9b0 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -661,7 +661,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_NR_UARTS=13 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig index ebd6301aa599..fdae21c503d7 100644 --- a/arch/parisc/defconfig +++ b/arch/parisc/defconfig @@ -517,7 +517,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_NR_UARTS=13 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 34e75bc8f4cc..9224fc3184ea 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -105,7 +105,7 @@ static struct old_serial_port old_serial_port[] = { SERIAL_PORT_DFNS /* defined in asm/serial.h */ }; -#define UART_NR (ARRAY_SIZE(old_serial_port) + CONFIG_SERIAL_8250_NR_UARTS) +#define UART_NR CONFIG_SERIAL_8250_NR_UARTS #ifdef CONFIG_SERIAL_8250_RSA @@ -993,21 +993,24 @@ static void autoconfig_irq(struct uart_8250_port *up) up->port.irq = (irq > 0) ? irq : 0; } +static inline void __stop_tx(struct uart_8250_port *p) +{ + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } +} + static void serial8250_stop_tx(struct uart_port *port, unsigned int tty_stop) { struct uart_8250_port *up = (struct uart_8250_port *)port; - if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } + __stop_tx(up); /* - * We only do this from uart_stop - if we run out of - * characters to send, we don't want to prevent the - * FIFO from emptying. + * We really want to stop the transmitter from sending. */ - if (up->port.type == PORT_16C950 && tty_stop) { + if (up->port.type == PORT_16C950) { up->acr |= UART_ACR_TXDIS; serial_icr_write(up, UART_ACR, up->acr); } @@ -1031,10 +1034,11 @@ static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start) transmit_chars(up); } } + /* - * We only do this from uart_start + * Re-enable the transmitter if we disabled it. */ - if (tty_start && up->port.type == PORT_16C950) { + if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { up->acr &= ~UART_ACR_TXDIS; serial_icr_write(up, UART_ACR, up->acr); } @@ -1155,7 +1159,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up) return; } if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial8250_stop_tx(&up->port, 0); + __stop_tx(up); return; } @@ -1174,7 +1178,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up) DEBUG_INTR("THRE..."); if (uart_circ_empty(xmit)) - serial8250_stop_tx(&up->port, 0); + __stop_tx(up); } static _INLINE_ void check_modem_status(struct uart_8250_port *up) @@ -1376,13 +1380,10 @@ static unsigned int serial8250_tx_empty(struct uart_port *port) static unsigned int serial8250_get_mctrl(struct uart_port *port) { struct uart_8250_port *up = (struct uart_8250_port *)port; - unsigned long flags; unsigned char status; unsigned int ret; - spin_lock_irqsave(&up->port.lock, flags); status = serial_in(up, UART_MSR); - spin_unlock_irqrestore(&up->port.lock, flags); ret = 0; if (status & UART_MSR_DCD) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e879bce160df..e0d0a470ddfc 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -86,7 +86,7 @@ config SERIAL_8250_ACPI namespace, say Y here. If unsure, say N. config SERIAL_8250_NR_UARTS - int "Maximum number of non-legacy 8250/16550 serial ports" + int "Maximum number of 8250/16550 serial ports" depends on SERIAL_8250 default "4" help diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c index 5400dc2c087e..6104aeef1243 100644 --- a/drivers/serial/au1x00_uart.c +++ b/drivers/serial/au1x00_uart.c @@ -556,13 +556,10 @@ static unsigned int serial8250_tx_empty(struct uart_port *port) static unsigned int serial8250_get_mctrl(struct uart_port *port) { struct uart_8250_port *up = (struct uart_8250_port *)port; - unsigned long flags; unsigned char status; unsigned int ret; - spin_lock_irqsave(&up->port.lock, flags); status = serial_in(up, UART_MSR); - spin_unlock_irqrestore(&up->port.lock, flags); ret = 0; if (status & UART_MSR_DCD) diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index 3ea46c069f6f..ea5bf4d4daa3 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -518,27 +518,28 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id, struct pt_regs *re static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port) { struct zilog_channel *channel; - unsigned long flags; unsigned char status; - spin_lock_irqsave(&port->lock, flags); - channel = ZILOG_CHANNEL_FROM_PORT(port); status = readb(&channel->control); ZSDELAY(); - spin_unlock_irqrestore(&port->lock, flags); - return status; } /* The port lock is not held. */ static unsigned int ip22zilog_tx_empty(struct uart_port *port) { + unsigned long flags; unsigned char status; unsigned int ret; + spin_lock_irqsave(&port->lock, flags); + status = ip22zilog_read_channel_status(port); + + spin_unlock_irqrestore(&port->lock, flags); + if (status & Tx_BUF_EMP) ret = TIOCSER_TEMT; else @@ -547,7 +548,7 @@ static unsigned int ip22zilog_tx_empty(struct uart_port *port) return ret; } -/* The port lock is not held. */ +/* The port lock is held and interrupts are disabled. */ static unsigned int ip22zilog_get_mctrl(struct uart_port *port) { unsigned char status; diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index a2a643318002..e43276c6a954 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -1058,12 +1058,9 @@ mpsc_get_mctrl(struct uart_port *port) { struct mpsc_port_info *pi = (struct mpsc_port_info *)port; u32 mflags, status; - ulong iflags; - spin_lock_irqsave(&pi->port.lock, iflags); status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m : readl(pi->mpsc_base + MPSC_CHR_10); - spin_unlock_irqrestore(&pi->port.lock, iflags); mflags = 0; if (status & 0x1) diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 85abd8a045e0..1c9f71617123 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -604,7 +604,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl) /* * Get Modem Control bits (only the input ones, the core will * or that with a cached value of the control ones) - * The port lock is not held. + * The port lock is held and interrupts are disabled. */ static unsigned int pmz_get_mctrl(struct uart_port *port) { @@ -615,7 +615,7 @@ static unsigned int pmz_get_mctrl(struct uart_port *port) if (ZS_IS_ASLEEP(uap) || uap->node == NULL) return 0; - status = pmz_peek_status(to_pmz(port)); + status = read_zsreg(uap, R0); ret = 0; if (status & DCD) diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 08b08d6ae904..461c81c93207 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -274,14 +274,11 @@ static unsigned int serial_pxa_tx_empty(struct uart_port *port) static unsigned int serial_pxa_get_mctrl(struct uart_port *port) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; unsigned char status; unsigned int ret; return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - spin_lock_irqsave(&up->port.lock, flags); status = serial_in(up, UART_MSR); - spin_unlock_irqrestore(&up->port.lock, flags); ret = 0; if (status & UART_MSR_DCD) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 36b1ae083fb7..139863a787f3 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -182,6 +182,13 @@ static int uart_startup(struct uart_state *state, int init_hw) uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); } + if (info->flags & UIF_CTS_FLOW) { + spin_lock_irq(&port->lock); + if (!(port->ops->get_mctrl(port) & TIOCM_CTS)) + info->tty->hw_stopped = 1; + spin_unlock_irq(&port->lock); + } + info->flags |= UIF_INITIALIZED; clear_bit(TTY_IO_ERROR, &info->tty->flags); @@ -828,7 +835,10 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file) if ((!file || !tty_hung_up_p(file)) && !(tty->flags & (1 << TTY_IO_ERROR))) { result = port->mctrl; + + spin_lock_irq(&port->lock); result |= port->ops->get_mctrl(port); + spin_unlock_irq(&port->lock); } up(&state->sem); @@ -1131,6 +1141,16 @@ static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios spin_unlock_irqrestore(&state->port->lock, flags); } + /* Handle turning on CRTSCTS */ + if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { + spin_lock_irqsave(&state->port->lock, flags); + if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) { + tty->hw_stopped = 1; + state->port->ops->stop_tx(state->port, 0); + } + spin_unlock_irqrestore(&state->port->lock, flags); + } + #if 0 /* * No need to wake up processes in open wait, since they @@ -1369,6 +1389,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) DECLARE_WAITQUEUE(wait, current); struct uart_info *info = state->info; struct uart_port *port = state->port; + unsigned int mctrl; info->blocked_open++; state->count--; @@ -1416,7 +1437,10 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) * and wait for the carrier to indicate that the * modem is ready for us. */ - if (port->ops->get_mctrl(port) & TIOCM_CAR) + spin_lock_irq(&port->lock); + mctrl = port->ops->get_mctrl(port); + spin_unlock_irq(&port->lock); + if (mctrl & TIOCM_CAR) break; up(&state->sem); @@ -1618,7 +1642,9 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i) if(capable(CAP_SYS_ADMIN)) { + spin_lock_irq(&port->lock); status = port->ops->get_mctrl(port); + spin_unlock_irq(&port->lock); ret += sprintf(buf + ret, " tx:%d rx:%d", port->icount.tx, port->icount.rx); diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index 3f1051a4a13f..d085030df70b 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -442,13 +442,10 @@ static unsigned int serial_txx9_tx_empty(struct uart_port *port) static unsigned int serial_txx9_get_mctrl(struct uart_port *port) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; unsigned int ret; - spin_lock_irqsave(&up->port.lock, flags); ret = ((sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS) | ((sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS); - spin_unlock_irqrestore(&up->port.lock, flags); return ret; } diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 10e2990a40d4..8d198880756a 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -426,18 +426,15 @@ static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) sunsab_tx_idle(up); } -/* port->lock is not held. */ +/* port->lock is held by caller and interrupts are disabled. */ static unsigned int sunsab_get_mctrl(struct uart_port *port) { struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; unsigned char val; unsigned int result; result = 0; - spin_lock_irqsave(&up->port.lock, flags); - val = readb(&up->regs->r.pvr); result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR; @@ -447,8 +444,6 @@ static unsigned int sunsab_get_mctrl(struct uart_port *port) val = readb(&up->regs->r.star); result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - return result; } diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index ddc97c905e14..d57a3553aea3 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -572,13 +572,10 @@ static unsigned int sunsu_tx_empty(struct uart_port *port) static unsigned int sunsu_get_mctrl(struct uart_port *port) { struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; unsigned char status; unsigned int ret; - spin_lock_irqsave(&up->port.lock, flags); status = serial_in(up, UART_MSR); - spin_unlock_irqrestore(&up->port.lock, flags); ret = 0; if (status & UART_MSR_DCD) diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 8e65206d3d76..bff42a7b89d0 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -610,27 +610,28 @@ static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *reg static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) { struct zilog_channel __iomem *channel; - unsigned long flags; unsigned char status; - spin_lock_irqsave(&port->lock, flags); - channel = ZILOG_CHANNEL_FROM_PORT(port); status = sbus_readb(&channel->control); ZSDELAY(); - spin_unlock_irqrestore(&port->lock, flags); - return status; } /* The port lock is not held. */ static unsigned int sunzilog_tx_empty(struct uart_port *port) { + unsigned long flags; unsigned char status; unsigned int ret; + spin_lock_irqsave(&port->lock, flags); + status = sunzilog_read_channel_status(port); + + spin_unlock_irqrestore(&port->lock, flags); + if (status & Tx_BUF_EMP) ret = TIOCSER_TEMT; else @@ -639,7 +640,7 @@ static unsigned int sunzilog_tx_empty(struct uart_port *port) return ret; } -/* The port lock is not held. */ +/* The port lock is held and interrupts are disabled. */ static unsigned int sunzilog_get_mctrl(struct uart_port *port) { unsigned char status; diff --git a/include/asm-alpha/serial.h b/include/asm-alpha/serial.h index 7b2d9ee95a44..7e4b2987d453 100644 --- a/include/asm-alpha/serial.h +++ b/include/asm-alpha/serial.h @@ -22,54 +22,9 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#endif - -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ - - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define EXTRA_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ - { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ - { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ - { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ - { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ - { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ - { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ - { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ - { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ - { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ - { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ - { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ - { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ - { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ - { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ - { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ - { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ - { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ - { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ - { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ - { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ - { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ - { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ - { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ - { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ - { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ -#else -#define EXTRA_SERIAL_PORT_DEFNS -#endif - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS \ - EXTRA_SERIAL_PORT_DEFNS diff --git a/include/asm-arm26/serial.h b/include/asm-arm26/serial.h index 21e1df31f086..5fc747d1b501 100644 --- a/include/asm-arm26/serial.h +++ b/include/asm-arm26/serial.h @@ -30,34 +30,16 @@ #if defined(CONFIG_ARCH_A5K) /* UART CLK PORT IRQ FLAGS */ -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ { 0, BASE_BAUD, 0x3F8, 10, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 10, STD_COM_FLAGS }, /* ttyS1 */ #else -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS1 */ #endif -#define EXTRA_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS2 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS3 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS4 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS5 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS6 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS7 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS8 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS9 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS10 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS11 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS12 */ \ - { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS13 */ - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS \ - EXTRA_SERIAL_PORT_DEFNS - #endif diff --git a/include/asm-i386/serial.h b/include/asm-i386/serial.h index 21ddecc77c77..e1ecfccb743b 100644 --- a/include/asm-i386/serial.h +++ b/include/asm-i386/serial.h @@ -22,109 +22,9 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#define HUB6_FLAGS 0 -#endif - -#define MCA_COM_FLAGS (STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA) - -/* - * The following define the access methods for the HUB6 card. All - * access is through two ports for all 24 possible chips. The card is - * selected through the high 2 bits, the port on that card with the - * "middle" 3 bits, and the register on that port with the bottom - * 3 bits. - * - * While the access port and interrupt is configurable, the default - * port locations are 0x302 for the port control register, and 0x303 - * for the data read/write register. Normally, the interrupt is at irq3 - * but can be anything from 3 to 7 inclusive. Note that using 3 will - * require disabling com2. - */ - -#define C_P(card,port) (((card)<<6|(port)<<3) + 1) - -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ - - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define EXTRA_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ - { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ - { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ - { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ - { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ - { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ - { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ - { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ - { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ - { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ - { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ - { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ - { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ - { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ - { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ - { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ - { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ - { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ - { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ - { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ - { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ - { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ - { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ - { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ - { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ - { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ -#else -#define EXTRA_SERIAL_PORT_DEFNS -#endif - -/* You can have up to four HUB6's in the system, but I've only - * included two cards here for a total of twelve ports. - */ -#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS)) -#define HUB6_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */ -#else -#define HUB6_SERIAL_PORT_DFNS -#endif - -#ifdef CONFIG_MCA -#define MCA_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS }, -#else -#define MCA_SERIAL_PORT_DFNS -#endif - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS \ - EXTRA_SERIAL_PORT_DEFNS \ - HUB6_SERIAL_PORT_DFNS \ - MCA_SERIAL_PORT_DFNS - diff --git a/include/asm-m68k/serial.h b/include/asm-m68k/serial.h index 9f5bcdc105fc..3fe29f8b0194 100644 --- a/include/asm-m68k/serial.h +++ b/include/asm-m68k/serial.h @@ -26,54 +26,9 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#endif - -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ - - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define EXTRA_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ - { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ - { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ - { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ - { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ - { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ - { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ - { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ - { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ - { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ - { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ - { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ - { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ - { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ - { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ - { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ - { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ - { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ - { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ - { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ - { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ - { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ - { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ - { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ - { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ - { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ -#else -#define EXTRA_SERIAL_PORT_DEFNS -#endif - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS \ - EXTRA_SERIAL_PORT_DEFNS diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h index 8a70ff58f760..4eed8e2acdc3 100644 --- a/include/asm-mips/serial.h +++ b/include/asm-mips/serial.h @@ -29,32 +29,6 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#define HUB6_FLAGS 0 -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE -#endif - -/* - * The following define the access methods for the HUB6 card. All - * access is through two ports for all 24 possible chips. The card is - * selected through the high 2 bits, the port on that card with the - * "middle" 3 bits, and the register on that port with the bottom - * 3 bits. - * - * While the access port and interrupt is configurable, the default - * port locations are 0x302 for the port control register, and 0x303 - * for the data read/write register. Normally, the interrupt is at irq3 - * but can be anything from 3 to 7 inclusive. Note that using 3 will - * require disabling com2. - */ - -#define C_P(card,port) (((card)<<6|(port)<<3) + 1) - #ifdef CONFIG_MACH_JAZZ #include <asm/jazz.h> @@ -240,66 +214,10 @@ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ -#ifdef CONFIG_SERIAL_MANY_PORTS -#define EXTRA_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ - { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ - { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ - { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ - { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ - { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ - { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ - { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ - { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ - { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ - { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ - { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ - { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ - { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ - { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ - { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ - { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ - { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ - { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ - { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ - { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ - { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ - { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ - { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ - { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ - { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ -#else /* CONFIG_SERIAL_MANY_PORTS */ -#define EXTRA_SERIAL_PORT_DEFNS -#endif /* CONFIG_SERIAL_MANY_PORTS */ - #else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ #define STD_SERIAL_PORT_DEFNS -#define EXTRA_SERIAL_PORT_DEFNS #endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ -/* You can have up to four HUB6's in the system, but I've only - * included two cards here for a total of twelve ports. - */ -#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS)) -#define HUB6_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */ -#else -#define HUB6_SERIAL_PORT_DFNS -#endif - #ifdef CONFIG_MOMENCO_JAGUAR_ATX /* Ordinary NS16552 duart with a 20MHz crystal. */ #define JAGUAR_ATX_UART_CLK 20000000 @@ -427,8 +345,6 @@ COBALT_SERIAL_PORT_DEFNS \ DDB5477_SERIAL_PORT_DEFNS \ EV96100_SERIAL_PORT_DEFNS \ - EXTRA_SERIAL_PORT_DEFNS \ - HUB6_SERIAL_PORT_DFNS \ IP32_SERIAL_PORT_DEFNS \ ITE_SERIAL_PORT_DEFNS \ IVR_SERIAL_PORT_DEFNS \ diff --git a/include/asm-parisc/serial.h b/include/asm-parisc/serial.h index 239c5dcab7e6..82fd820d684f 100644 --- a/include/asm-parisc/serial.h +++ b/include/asm-parisc/serial.h @@ -19,18 +19,4 @@ * A500 w/ PCI serial cards: 5 + 4 * card ~= 17 */ -#define STD_SERIAL_PORT_DEFNS \ - { 0, }, /* ttyS0 */ \ - { 0, }, /* ttyS1 */ \ - { 0, }, /* ttyS2 */ \ - { 0, }, /* ttyS3 */ \ - { 0, }, /* ttyS4 */ \ - { 0, }, /* ttyS5 */ \ - { 0, }, /* ttyS6 */ \ - { 0, }, /* ttyS7 */ \ - { 0, }, /* ttyS8 */ - - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS - +#define SERIAL_PORT_DFNS diff --git a/include/asm-ppc/pc_serial.h b/include/asm-ppc/pc_serial.h index fa9cbb67ce3e..8f994f9f8857 100644 --- a/include/asm-ppc/pc_serial.h +++ b/include/asm-ppc/pc_serial.h @@ -35,93 +35,9 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#define HUB6_FLAGS 0 -#endif - -/* - * The following define the access methods for the HUB6 card. All - * access is through two ports for all 24 possible chips. The card is - * selected through the high 2 bits, the port on that card with the - * "middle" 3 bits, and the register on that port with the bottom - * 3 bits. - * - * While the access port and interrupt is configurable, the default - * port locations are 0x302 for the port control register, and 0x303 - * for the data read/write register. Normally, the interrupt is at irq3 - * but can be anything from 3 to 7 inclusive. Note that using 3 will - * require disabling com2. - */ - -#define C_P(card,port) (((card)<<6|(port)<<3) + 1) - -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ - - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define EXTRA_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ - { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ - { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ - { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ - { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ - { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ - { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ - { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ - { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ - { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ - { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ - { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ - { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ - { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ - { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ - { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ - { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ - { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ - { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ - { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ - { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ - { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ - { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ - { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ - { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ - { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ -#else -#define EXTRA_SERIAL_PORT_DEFNS -#endif - -/* You can have up to four HUB6's in the system, but I've only - * included two cards here for a total of twelve ports. - */ -#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS)) -#define HUB6_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */ -#else -#define HUB6_SERIAL_PORT_DFNS -#endif - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS \ - EXTRA_SERIAL_PORT_DEFNS \ - HUB6_SERIAL_PORT_DFNS diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h index 540f12205923..7233af42f755 100644 --- a/include/asm-sh/bigsur/serial.h +++ b/include/asm-sh/bigsur/serial.h @@ -14,13 +14,10 @@ #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ - -#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS - /* XXX: This should be moved ino irq.h */ #define irq_cannonicalize(x) (x) diff --git a/include/asm-sh/ec3104/serial.h b/include/asm-sh/ec3104/serial.h index f8eb16312ed9..cfe4d78ec1ee 100644 --- a/include/asm-sh/ec3104/serial.h +++ b/include/asm-sh/ec3104/serial.h @@ -10,13 +10,11 @@ * it's got the keyboard controller behind it so we can't really use it * (without moving the keyboard driver to userspace, which doesn't sound * like a very good idea) */ -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x11C00, EC3104_IRQBASE+7, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x12000, EC3104_IRQBASE+8, STD_COM_FLAGS }, /* ttyS1 */ \ { 0, BASE_BAUD, 0x12400, EC3104_IRQBASE+9, STD_COM_FLAGS }, /* ttyS2 */ -#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS - /* XXX: This should be moved ino irq.h */ #define irq_cannonicalize(x) (x) diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h index 5474dbdbaa86..f51e232d5cd9 100644 --- a/include/asm-sh/serial.h +++ b/include/asm-sh/serial.h @@ -29,20 +29,18 @@ #ifdef CONFIG_HD64465 #include <asm/hd64465.h> -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ #else -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS } /* ttyS1 */ #endif -#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS - #endif #endif /* _ASM_SERIAL_H */ diff --git a/include/asm-sh64/serial.h b/include/asm-sh64/serial.h index 8e39b4e90c76..29c9be15112b 100644 --- a/include/asm-sh64/serial.h +++ b/include/asm-sh64/serial.h @@ -20,13 +20,11 @@ #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS } /* ttyS1 */ -#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS - /* XXX: This should be moved ino irq.h */ #define irq_cannonicalize(x) (x) diff --git a/include/asm-x86_64/serial.h b/include/asm-x86_64/serial.h index dbab232044cd..dc752eafa681 100644 --- a/include/asm-x86_64/serial.h +++ b/include/asm-x86_64/serial.h @@ -22,109 +22,9 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#define HUB6_FLAGS 0 -#endif - -#define MCA_COM_FLAGS (STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA) - -/* - * The following define the access methods for the HUB6 card. All - * access is through two ports for all 24 possible chips. The card is - * selected through the high 2 bits, the port on that card with the - * "middle" 3 bits, and the register on that port with the bottom - * 3 bits. - * - * While the access port and interrupt is configurable, the default - * port locations are 0x302 for the port control register, and 0x303 - * for the data read/write register. Normally, the interrupt is at irq3 - * but can be anything from 3 to 7 inclusive. Note that using 3 will - * require disabling com2. - */ - -#define C_P(card,port) (((card)<<6|(port)<<3) + 1) - -#define STD_SERIAL_PORT_DEFNS \ +#define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ - - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define EXTRA_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ - { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ - { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ - { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ - { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ - { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ - { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ - { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ - { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ - { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ - { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ - { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ - { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ - { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ - { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ - { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ - { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ - { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ - { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ - { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ - { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ - { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ - { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ - { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ - { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ - { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ -#else -#define EXTRA_SERIAL_PORT_DEFNS -#endif - -/* You can have up to four HUB6's in the system, but I've only - * included two cards here for a total of twelve ports. - */ -#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS)) -#define HUB6_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */ -#else -#define HUB6_SERIAL_PORT_DFNS -#endif - -#ifdef CONFIG_MCA -#define MCA_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS }, \ - { 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS }, -#else -#define MCA_SERIAL_PORT_DFNS -#endif - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS \ - EXTRA_SERIAL_PORT_DEFNS \ - HUB6_SERIAL_PORT_DFNS \ - MCA_SERIAL_PORT_DFNS - |