summary refs log tree commit diff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/driver-api/soundwire/locking.rst4
-rw-r--r--drivers/soundwire/bus.c6
-rw-r--r--drivers/soundwire/cadence_master.c30
-rw-r--r--drivers/soundwire/intel.c17
-rw-r--r--drivers/soundwire/intel.h2
-rw-r--r--drivers/soundwire/intel_init.c25
-rw-r--r--drivers/soundwire/mipi_disco.c35
-rw-r--r--drivers/soundwire/stream.c8
-rw-r--r--include/linux/soundwire/sdw.h88
-rw-r--r--include/linux/soundwire/sdw_type.h11
10 files changed, 162 insertions, 64 deletions
diff --git a/Documentation/driver-api/soundwire/locking.rst b/Documentation/driver-api/soundwire/locking.rst
index 253f73555255..3a7ffb3d87f3 100644
--- a/Documentation/driver-api/soundwire/locking.rst
+++ b/Documentation/driver-api/soundwire/locking.rst
@@ -44,7 +44,9 @@ Message transfer.
      b. Transfer message (Read/Write) to Slave1 or broadcast message on
         Bus in case of bank switch.
 
-     c. Release Message lock ::
+     c. Release Message lock
+
+     ::
 
 	+----------+                    +---------+
 	|          |                    |         |
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index aac35fc3cf22..fe745830a261 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -87,7 +87,7 @@ int sdw_add_bus_master(struct sdw_bus *bus)
 
 	/*
 	 * Initialize clock values based on Master properties. The max
-	 * frequency is read from max_freq property. Current assumption
+	 * frequency is read from max_clk_freq property. Current assumption
 	 * is that the bus will start at highest clock frequency when
 	 * powered on.
 	 *
@@ -95,7 +95,7 @@ int sdw_add_bus_master(struct sdw_bus *bus)
 	 * to start with bank 0 (Table 40 of Spec)
 	 */
 	prop = &bus->prop;
-	bus->params.max_dr_freq = prop->max_freq * SDW_DOUBLE_RATE_FACTOR;
+	bus->params.max_dr_freq = prop->max_clk_freq * SDW_DOUBLE_RATE_FACTOR;
 	bus->params.curr_dr_freq = bus->params.max_dr_freq;
 	bus->params.curr_bank = SDW_BANK0;
 	bus->params.next_bank = SDW_BANK1;
@@ -648,7 +648,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave)
 		return 0;
 
 	/* Enable DP0 interrupts */
-	val = prop->dp0_prop->device_interrupts;
+	val = prop->dp0_prop->imp_def_interrupts;
 	val |= SDW_DP0_INT_PORT_READY | SDW_DP0_INT_BRA_FAILURE;
 
 	ret = sdw_update(slave, SDW_DP0_INTMASK, val, val);
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c
index 682789bb8ab3..ff4badc9b3de 100644
--- a/drivers/soundwire/cadence_master.c
+++ b/drivers/soundwire/cadence_master.c
@@ -9,6 +9,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/soundwire/sdw_registers.h>
@@ -236,19 +237,19 @@ cdns_fill_msg_resp(struct sdw_cdns *cdns,
 	for (i = 0; i < count; i++) {
 		if (!(cdns->response_buf[i] & CDNS_MCP_RESP_ACK)) {
 			no_ack = 1;
-			dev_dbg(cdns->dev, "Msg Ack not received\n");
+			dev_dbg_ratelimited(cdns->dev, "Msg Ack not received\n");
 			if (cdns->response_buf[i] & CDNS_MCP_RESP_NACK) {
 				nack = 1;
-				dev_err(cdns->dev, "Msg NACK received\n");
+				dev_err_ratelimited(cdns->dev, "Msg NACK received\n");
 			}
 		}
 	}
 
 	if (nack) {
-		dev_err(cdns->dev, "Msg NACKed for Slave %d\n", msg->dev_num);
+		dev_err_ratelimited(cdns->dev, "Msg NACKed for Slave %d\n", msg->dev_num);
 		return SDW_CMD_FAIL;
 	} else if (no_ack) {
-		dev_dbg(cdns->dev, "Msg ignored for Slave %d\n", msg->dev_num);
+		dev_dbg_ratelimited(cdns->dev, "Msg ignored for Slave %d\n", msg->dev_num);
 		return SDW_CMD_IGNORED;
 	}
 
@@ -356,12 +357,12 @@ cdns_program_scp_addr(struct sdw_cdns *cdns, struct sdw_msg *msg)
 
 	/* For NACK, NO ack, don't return err if we are in Broadcast mode */
 	if (nack) {
-		dev_err(cdns->dev,
-			"SCP_addrpage NACKed for Slave %d\n", msg->dev_num);
+		dev_err_ratelimited(cdns->dev,
+				    "SCP_addrpage NACKed for Slave %d\n", msg->dev_num);
 		return SDW_CMD_FAIL;
 	} else if (no_ack) {
-		dev_dbg(cdns->dev,
-			"SCP_addrpage ignored for Slave %d\n", msg->dev_num);
+		dev_dbg_ratelimited(cdns->dev,
+				    "SCP_addrpage ignored for Slave %d\n", msg->dev_num);
 		return SDW_CMD_IGNORED;
 	}
 
@@ -486,7 +487,8 @@ static int cdns_update_slave_status(struct sdw_cdns *cdns,
 {
 	enum sdw_slave_status status[SDW_MAX_DEVICES + 1];
 	bool is_slave = false;
-	u64 slave, mask;
+	u64 slave;
+	u32 mask;
 	int i, set_status;
 
 	/* combine the two status */
@@ -524,9 +526,9 @@ static int cdns_update_slave_status(struct sdw_cdns *cdns,
 
 		/* first check if Slave reported multiple status */
 		if (set_status > 1) {
-			dev_warn(cdns->dev,
-				 "Slave reported multiple Status: %d\n",
-				 status[i]);
+			dev_warn_ratelimited(cdns->dev,
+					     "Slave reported multiple Status: %d\n",
+					     mask);
 			/*
 			 * TODO: we need to reread the status here by
 			 * issuing a PING cmd
@@ -612,7 +614,7 @@ irqreturn_t sdw_cdns_thread(int irq, void *dev_id)
 	struct sdw_cdns *cdns = dev_id;
 	u32 slave0, slave1;
 
-	dev_dbg(cdns->dev, "Slave status change\n");
+	dev_dbg_ratelimited(cdns->dev, "Slave status change\n");
 
 	slave0 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT0);
 	slave1 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT1);
@@ -716,6 +718,8 @@ int sdw_cdns_pdi_init(struct sdw_cdns *cdns,
 	stream = &cdns->pcm;
 
 	/* First two PDIs are reserved for bulk transfers */
+	if (stream->num_bd < CDNS_PCM_PDI_OFFSET)
+		return -EINVAL;
 	stream->num_bd -= CDNS_PCM_PDI_OFFSET;
 	offset = CDNS_PCM_PDI_OFFSET;
 
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index 60293a00a14e..317873bc0555 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -263,6 +263,9 @@ static void intel_pdi_init(struct sdw_intel *sdw,
 	config->pcm_out = (pcm_cap & SDW_SHIM_PCMSCAP_OSS) >>
 					SDW_REG_SHIFT(SDW_SHIM_PCMSCAP_OSS);
 
+	dev_dbg(sdw->cdns.dev, "PCM cap bd:%d in:%d out:%d\n",
+		config->pcm_bd, config->pcm_in, config->pcm_out);
+
 	/* PDM Stream Capability */
 	pdm_cap = intel_readw(shim, SDW_SHIM_PDMSCAP(link_id));
 
@@ -272,6 +275,9 @@ static void intel_pdi_init(struct sdw_intel *sdw,
 					SDW_REG_SHIFT(SDW_SHIM_PDMSCAP_ISS);
 	config->pdm_out = (pdm_cap & SDW_SHIM_PDMSCAP_OSS) >>
 					SDW_REG_SHIFT(SDW_SHIM_PDMSCAP_OSS);
+
+	dev_dbg(sdw->cdns.dev, "PDM cap bd:%d in:%d out:%d\n",
+		config->pdm_bd, config->pdm_in, config->pdm_out);
 }
 
 static int
@@ -796,13 +802,14 @@ static int intel_prop_read(struct sdw_bus *bus)
 	sdw_master_read_prop(bus);
 
 	/* BIOS is not giving some values correctly. So, lets override them */
-	bus->prop.num_freq = 1;
-	bus->prop.freq = devm_kcalloc(bus->dev, bus->prop.num_freq,
-				      sizeof(*bus->prop.freq), GFP_KERNEL);
-	if (!bus->prop.freq)
+	bus->prop.num_clk_freq = 1;
+	bus->prop.clk_freq = devm_kcalloc(bus->dev, bus->prop.num_clk_freq,
+					  sizeof(*bus->prop.clk_freq),
+					  GFP_KERNEL);
+	if (!bus->prop.clk_freq)
 		return -ENOMEM;
 
-	bus->prop.freq[0] = bus->prop.max_freq;
+	bus->prop.clk_freq[0] = bus->prop.max_clk_freq;
 	bus->prop.err_threshold = 5;
 
 	return 0;
diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h
index 71050e5f643d..d923b6262330 100644
--- a/drivers/soundwire/intel.h
+++ b/drivers/soundwire/intel.h
@@ -5,7 +5,7 @@
 #define __SDW_INTEL_LOCAL_H
 
 /**
- * struct sdw_intel_res - Soundwire link resources
+ * struct sdw_intel_link_res - Soundwire link resources
  * @registers: Link IO registers base
  * @shim: Audio shim pointer
  * @alh: ALH (Audio Link Hub) pointer
diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c
index d3d6b54c5791..70637a0383d2 100644
--- a/drivers/soundwire/intel_init.c
+++ b/drivers/soundwire/intel_init.c
@@ -14,6 +14,7 @@
 #include <linux/soundwire/sdw_intel.h>
 #include "intel.h"
 
+#define SDW_LINK_TYPE		4 /* from Intel ACPI documentation */
 #define SDW_MAX_LINKS		4
 #define SDW_SHIM_LCAP		0x0
 #define SDW_SHIM_BASE		0x2C000
@@ -80,6 +81,7 @@ static struct sdw_intel_ctx
 
 	/* Check SNDWLCAP.LCOUNT */
 	caps = ioread32(res->mmio_base + SDW_SHIM_BASE + SDW_SHIM_LCAP);
+	caps &= GENMASK(2, 0);
 
 	/* Check HW supported vs property value and use min of two */
 	count = min_t(u8, caps, count);
@@ -89,6 +91,9 @@ static struct sdw_intel_ctx
 		dev_err(&adev->dev, "Link count %d exceeds max %d\n",
 			count, SDW_MAX_LINKS);
 		return NULL;
+	} else if (!count) {
+		dev_warn(&adev->dev, "No SoundWire links detected\n");
+		return NULL;
 	}
 
 	dev_dbg(&adev->dev, "Creating %d SDW Link devices\n", count);
@@ -150,6 +155,12 @@ static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level,
 {
 	struct sdw_intel_res *res = cdata;
 	struct acpi_device *adev;
+	acpi_status status;
+	u64 adr;
+
+	status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr);
+	if (ACPI_FAILURE(status))
+		return AE_OK; /* keep going */
 
 	if (acpi_bus_get_device(handle, &adev)) {
 		pr_err("%s: Couldn't find ACPI handle\n", __func__);
@@ -157,7 +168,19 @@ static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level,
 	}
 
 	res->handle = handle;
-	return AE_OK;
+
+	/*
+	 * On some Intel platforms, multiple children of the HDAS
+	 * device can be found, but only one of them is the SoundWire
+	 * controller. The SNDW device is always exposed with
+	 * Name(_ADR, 0x40000000), with bits 31..28 representing the
+	 * SoundWire link so filter accordingly
+	 */
+	if ((adr & GENMASK(31, 28)) >> 28 != SDW_LINK_TYPE)
+		return AE_OK; /* keep going */
+
+	/* device found, stop namespace walk */
+	return AE_CTRL_TERMINATE;
 }
 
 /**
diff --git a/drivers/soundwire/mipi_disco.c b/drivers/soundwire/mipi_disco.c
index c1f51d6a23d2..79fee1b21ab6 100644
--- a/drivers/soundwire/mipi_disco.c
+++ b/drivers/soundwire/mipi_disco.c
@@ -40,7 +40,7 @@ int sdw_master_read_prop(struct sdw_bus *bus)
 
 	/* Find master handle */
 	snprintf(name, sizeof(name),
-		 "mipi-sdw-master-%d-subproperties", bus->link_id);
+		 "mipi-sdw-link-%d-subproperties", bus->link_id);
 
 	link = device_get_named_child_node(bus->dev, name);
 	if (!link) {
@@ -50,39 +50,40 @@ int sdw_master_read_prop(struct sdw_bus *bus)
 
 	if (fwnode_property_read_bool(link,
 				      "mipi-sdw-clock-stop-mode0-supported"))
-		prop->clk_stop_mode = SDW_CLK_STOP_MODE0;
+		prop->clk_stop_modes |= BIT(SDW_CLK_STOP_MODE0);
 
 	if (fwnode_property_read_bool(link,
 				      "mipi-sdw-clock-stop-mode1-supported"))
-		prop->clk_stop_mode |= SDW_CLK_STOP_MODE1;
+		prop->clk_stop_modes |= BIT(SDW_CLK_STOP_MODE1);
 
 	fwnode_property_read_u32(link,
 				 "mipi-sdw-max-clock-frequency",
-				 &prop->max_freq);
+				 &prop->max_clk_freq);
 
 	nval = fwnode_property_read_u32_array(link,
 			"mipi-sdw-clock-frequencies-supported", NULL, 0);
 	if (nval > 0) {
-		prop->num_freq = nval;
-		prop->freq = devm_kcalloc(bus->dev, prop->num_freq,
-					  sizeof(*prop->freq), GFP_KERNEL);
-		if (!prop->freq)
+		prop->num_clk_freq = nval;
+		prop->clk_freq = devm_kcalloc(bus->dev, prop->num_clk_freq,
+					      sizeof(*prop->clk_freq),
+					      GFP_KERNEL);
+		if (!prop->clk_freq)
 			return -ENOMEM;
 
 		fwnode_property_read_u32_array(link,
 				"mipi-sdw-clock-frequencies-supported",
-				prop->freq, prop->num_freq);
+				prop->clk_freq, prop->num_clk_freq);
 	}
 
 	/*
 	 * Check the frequencies supported. If FW doesn't provide max
 	 * freq, then populate here by checking values.
 	 */
-	if (!prop->max_freq && prop->freq) {
-		prop->max_freq = prop->freq[0];
-		for (i = 1; i < prop->num_freq; i++) {
-			if (prop->freq[i] > prop->max_freq)
-				prop->max_freq = prop->freq[i];
+	if (!prop->max_clk_freq && prop->clk_freq) {
+		prop->max_clk_freq = prop->clk_freq[0];
+		for (i = 1; i < prop->num_clk_freq; i++) {
+			if (prop->clk_freq[i] > prop->max_clk_freq)
+				prop->max_clk_freq = prop->clk_freq[i];
 		}
 	}
 
@@ -149,13 +150,13 @@ static int sdw_slave_read_dp0(struct sdw_slave *slave,
 				dp0->words, dp0->num_words);
 	}
 
-	dp0->flow_controlled = fwnode_property_read_bool(port,
+	dp0->BRA_flow_controlled = fwnode_property_read_bool(port,
 				"mipi-sdw-bra-flow-controlled");
 
 	dp0->simple_ch_prep_sm = fwnode_property_read_bool(port,
 				"mipi-sdw-simplified-channel-prepare-sm");
 
-	dp0->device_interrupts = fwnode_property_read_bool(port,
+	dp0->imp_def_interrupts = fwnode_property_read_bool(port,
 				"mipi-sdw-imp-def-dp0-interrupts-supported");
 
 	return 0;
@@ -224,7 +225,7 @@ static int sdw_slave_read_dpn(struct sdw_slave *slave,
 
 		fwnode_property_read_u32(node,
 				"mipi-sdw-imp-def-dpn-interrupts-supported",
-				&dpn[i].device_interrupts);
+				&dpn[i].imp_def_interrupts);
 
 		fwnode_property_read_u32(node, "mipi-sdw-min-channel-number",
 					 &dpn[i].min_ch);
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index 1d5294b8783b..a0476755a459 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -439,7 +439,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 
 	prep_ch.bank = bus->params.next_bank;
 
-	if (dpn_prop->device_interrupts || !dpn_prop->simple_ch_prep_sm)
+	if (dpn_prop->imp_def_interrupts || !dpn_prop->simple_ch_prep_sm)
 		intr = true;
 
 	/*
@@ -449,7 +449,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 	 */
 	if (prep && intr) {
 		ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep,
-					     dpn_prop->device_interrupts);
+					     dpn_prop->imp_def_interrupts);
 		if (ret < 0)
 			return ret;
 	}
@@ -493,7 +493,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 	/* Disable interrupt after Port de-prepare */
 	if (!prep && intr)
 		ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep,
-					     dpn_prop->device_interrupts);
+					     dpn_prop->imp_def_interrupts);
 
 	return ret;
 }
@@ -1473,7 +1473,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
 		memcpy(&params, &bus->params, sizeof(params));
 
 		/* TODO: Support Asynchronous mode */
-		if ((prop->max_freq % stream->params.rate) != 0) {
+		if ((prop->max_clk_freq % stream->params.rate) != 0) {
 			dev_err(bus->dev, "Async mode not supported\n");
 			return -EINVAL;
 		}
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 35662d9c2c62..bea46bd8b6ce 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -41,6 +41,31 @@ struct sdw_slave;
 #define SDW_DAI_ID_RANGE_START		100
 #define SDW_DAI_ID_RANGE_END		200
 
+enum {
+	SDW_PORT_DIRN_SINK = 0,
+	SDW_PORT_DIRN_SOURCE,
+	SDW_PORT_DIRN_MAX,
+};
+
+/*
+ * constants for flow control, ports and transport
+ *
+ * these are bit masks as devices can have multiple capabilities
+ */
+
+/*
+ * flow modes for SDW port. These can be isochronous, tx controlled,
+ * rx controlled or async
+ */
+#define SDW_PORT_FLOW_MODE_ISOCH	0
+#define SDW_PORT_FLOW_MODE_TX_CNTRL	BIT(0)
+#define SDW_PORT_FLOW_MODE_RX_CNTRL	BIT(1)
+#define SDW_PORT_FLOW_MODE_ASYNC	GENMASK(1, 0)
+
+/* sample packaging for block. It can be per port or per channel */
+#define SDW_BLOCK_PACKG_PER_PORT	BIT(0)
+#define SDW_BLOCK_PACKG_PER_CH		BIT(1)
+
 /**
  * enum sdw_slave_status - Slave status
  * @SDW_SLAVE_UNATTACHED: Slave is not attached with the bus.
@@ -76,6 +101,14 @@ enum sdw_command_response {
 	SDW_CMD_FAIL_OTHER = 4,
 };
 
+/* block group count enum */
+enum sdw_dpn_grouping {
+	SDW_BLK_GRP_CNT_1 = 0,
+	SDW_BLK_GRP_CNT_2 = 1,
+	SDW_BLK_GRP_CNT_3 = 2,
+	SDW_BLK_GRP_CNT_4 = 3,
+};
+
 /**
  * enum sdw_stream_type: data stream type
  *
@@ -100,6 +133,26 @@ enum sdw_data_direction {
 	SDW_DATA_DIR_TX = 1,
 };
 
+/**
+ * enum sdw_port_data_mode: Data Port mode
+ *
+ * @SDW_PORT_DATA_MODE_NORMAL: Normal data mode where audio data is received
+ * and transmitted.
+ * @SDW_PORT_DATA_MODE_STATIC_1: Simple test mode which uses static value of
+ * logic 1. The encoding will result in signal transitions at every bitslot
+ * owned by this Port
+ * @SDW_PORT_DATA_MODE_STATIC_0: Simple test mode which uses static value of
+ * logic 0. The encoding will result in no signal transitions
+ * @SDW_PORT_DATA_MODE_PRBS: Test mode which uses a PRBS generator to produce
+ * a pseudo random data pattern that is transferred
+ */
+enum sdw_port_data_mode {
+	SDW_PORT_DATA_MODE_NORMAL = 0,
+	SDW_PORT_DATA_MODE_STATIC_1 = 1,
+	SDW_PORT_DATA_MODE_STATIC_0 = 2,
+	SDW_PORT_DATA_MODE_PRBS = 3,
+};
+
 /*
  * SDW properties, defined in MIPI DisCo spec v1.0
  */
@@ -153,10 +206,11 @@ enum sdw_clk_stop_mode {
  * (inclusive)
  * @num_words: number of wordlengths supported
  * @words: wordlengths supported
- * @flow_controlled: Slave implementation results in an OK_NotReady
+ * @BRA_flow_controlled: Slave implementation results in an OK_NotReady
  * response
  * @simple_ch_prep_sm: If channel prepare sequence is required
- * @device_interrupts: If implementation-defined interrupts are supported
+ * @imp_def_interrupts: If set, each bit corresponds to support for
+ * implementation-defined interrupts
  *
  * The wordlengths are specified by Spec as max, min AND number of
  * discrete values, implementation can define based on the wordlengths they
@@ -167,9 +221,9 @@ struct sdw_dp0_prop {
 	u32 min_word;
 	u32 num_words;
 	u32 *words;
-	bool flow_controlled;
+	bool BRA_flow_controlled;
 	bool simple_ch_prep_sm;
-	bool device_interrupts;
+	bool imp_def_interrupts;
 };
 
 /**
@@ -219,7 +273,7 @@ struct sdw_dpn_audio_mode {
  * @simple_ch_prep_sm: If the port supports simplified channel prepare state
  * machine
  * @ch_prep_timeout: Port-specific timeout value, in milliseconds
- * @device_interrupts: If set, each bit corresponds to support for
+ * @imp_def_interrupts: If set, each bit corresponds to support for
  * implementation-defined interrupts
  * @max_ch: Maximum channels supported
  * @min_ch: Minimum channels supported
@@ -244,7 +298,7 @@ struct sdw_dpn_prop {
 	u32 max_grouping;
 	bool simple_ch_prep_sm;
 	u32 ch_prep_timeout;
-	u32 device_interrupts;
+	u32 imp_def_interrupts;
 	u32 max_ch;
 	u32 min_ch;
 	u32 num_ch;
@@ -311,36 +365,32 @@ struct sdw_slave_prop {
 /**
  * struct sdw_master_prop - Master properties
  * @revision: MIPI spec version of the implementation
- * @master_count: Number of masters
- * @clk_stop_mode: Bitmap for Clock Stop modes supported
- * @max_freq: Maximum Bus clock frequency, in Hz
+ * @clk_stop_modes: Bitmap, bit N set when clock-stop-modeN supported
+ * @max_clk_freq: Maximum Bus clock frequency, in Hz
  * @num_clk_gears: Number of clock gears supported
  * @clk_gears: Clock gears supported
- * @num_freq: Number of clock frequencies supported, in Hz
- * @freq: Clock frequencies supported, in Hz
+ * @num_clk_freq: Number of clock frequencies supported, in Hz
+ * @clk_freq: Clock frequencies supported, in Hz
  * @default_frame_rate: Controller default Frame rate, in Hz
  * @default_row: Number of rows
  * @default_col: Number of columns
- * @dynamic_frame: Dynamic frame supported
+ * @dynamic_frame: Dynamic frame shape supported
  * @err_threshold: Number of times that software may retry sending a single
  * command
- * @dpn_prop: Data Port N properties
  */
 struct sdw_master_prop {
 	u32 revision;
-	u32 master_count;
-	enum sdw_clk_stop_mode clk_stop_mode;
-	u32 max_freq;
+	u32 clk_stop_modes;
+	u32 max_clk_freq;
 	u32 num_clk_gears;
 	u32 *clk_gears;
-	u32 num_freq;
-	u32 *freq;
+	u32 num_clk_freq;
+	u32 *clk_freq;
 	u32 default_frame_rate;
 	u32 default_row;
 	u32 default_col;
 	bool dynamic_frame;
 	u32 err_threshold;
-	struct sdw_dpn_prop *dpn_prop;
 };
 
 int sdw_master_read_prop(struct sdw_bus *bus);
diff --git a/include/linux/soundwire/sdw_type.h b/include/linux/soundwire/sdw_type.h
index 9c756b5a0dfe..aaa7f4267c14 100644
--- a/include/linux/soundwire/sdw_type.h
+++ b/include/linux/soundwire/sdw_type.h
@@ -16,4 +16,15 @@ void sdw_unregister_driver(struct sdw_driver *drv);
 
 int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size);
 
+/**
+ * module_sdw_driver() - Helper macro for registering a Soundwire driver
+ * @__sdw_driver: soundwire slave driver struct
+ *
+ * Helper macro for Soundwire drivers which do not do anything special in
+ * module init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_sdw_driver(__sdw_driver) \
+	module_driver(__sdw_driver, sdw_register_driver, \
+			sdw_unregister_driver)
 #endif /* __SOUNDWIRE_TYPES_H */
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-09-30 05:19:18 +0000