tree-wide: fix assorted typos all over the place

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

6 files changed, 11 insertions, 10 deletions

diff --git a/sound/pci/ca0106/ca0106_proc.c b/sound/pci/ca0106/ca0106_proc.c
index c62b7d10ec61..8d13092300da 100644
--- a/sound/pci/ca0106/ca0106_proc.c
+++ b/sound/pci/ca0106/ca0106_proc.c
@@ -233,7 +233,7 @@ static void snd_ca0106_proc_dump_iec958( struct snd_info_buffer *buffer, u32 val
 			snd_iprintf(buffer, "user-defined\n");
 			break;
 		default:
-			snd_iprintf(buffer, "unkown\n");
+			snd_iprintf(buffer, "unknown\n");
 			break;
 		}
 		snd_iprintf(buffer, "Sample Bits: ");
diff --git a/sound/pci/cs46xx/imgs/cwcdma.asp b/sound/pci/cs46xx/imgs/cwcdma.asp
index 09d24c76f034..a65e1193c89a 100644
--- a/sound/pci/cs46xx/imgs/cwcdma.asp
+++ b/sound/pci/cs46xx/imgs/cwcdma.asp
@@ -26,10 +26,11 @@
 //
 //
 // The purpose of this code is very simple: make it possible to tranfser
-// the samples 'as they are' with no alteration from a PCMreader SCB (DMA from host)
-// to any other SCB. This is useful for AC3 throug SPDIF. SRC (source rate converters) 
-// task always alters the samples in some how, however it's from 48khz -> 48khz. The
-// alterations are not audible, but AC3 wont work. 
+// the samples 'as they are' with no alteration from a PCMreader
+// SCB (DMA from host) to any other SCB. This is useful for AC3 through SPDIF.
+// SRC (source rate converters) task always alters the samples in somehow,
+// however it's from 48khz -> 48khz.
+// The alterations are not audible, but AC3 wont work. 
 //
 //        ...
 //         |
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 36e08bd2b3cc..360e3809a60b 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -184,7 +184,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard.");
  * The hardware has 3 channels for playback and 1 for capture.
  *  - channel 0 is the front channel
  *  - channel 1 is the rear channel
- *  - channel 2 is the center/lfe chanel
+ *  - channel 2 is the center/lfe channel
  * Volume is controlled by the AC97 for the front and rear channels by
  * the PCM Playback Volume, Sigmatel Surround Playback Volume and 
  * Surround Playback Volume. The Sigmatel 4-Speaker Stereo switch affects
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index 780e1a72114a..8917071d5b6a 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -66,7 +66,7 @@ struct cmi_spec {
 
 	struct hda_pcm pcm_rec[2];	/* PCM information */
 
-	/* pin deafault configuration */
+	/* pin default configuration */
 	hda_nid_t pin_nid[NUM_PINS];
 	unsigned int def_conf[NUM_PINS];
 	unsigned int pin_def_confs;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ff20048504b6..872731eb49e8 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6619,7 +6619,7 @@ static struct hda_input_mux alc889A_mb31_capture_source = {
 		/* Front Mic (0x01) unused */
 		{ "Line", 0x2 },
 		/* Line 2 (0x03) unused */
-		/* CD (0x04) unsused? */
+		/* CD (0x04) unused? */
 	},
 };
 
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 0dce331a2a3b..a1b10d1a384d 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -3017,7 +3017,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry,
 		insel = "Coaxial";
 		break;
 	default:
-		insel = "Unkown";
+		insel = "Unknown";
 	}
 
 	switch (hdspm->control_register & HDSPM_SyncRefMask) {
@@ -3028,7 +3028,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry,
 		syncref = "MADI";
 		break;
 	default:
-		syncref = "Unkown";
+		syncref = "Unknown";
 	}
 	snd_iprintf(buffer, "Inputsel = %s, SyncRef = %s\n", insel,
 		    syncref);