net: vlan: make non-hw-accel rx path similar to hw-accel

Now there are 2 paths for rx vlan frames. When rx-vlan-hw-accel is
enabled, skb is untagged by NIC, vlan_tci is set and the skb gets into
vlan code in __netif_receive_skb - vlan_hwaccel_do_receive.

For non-rx-vlan-hw-accel however, tagged skb goes thru whole
__netif_receive_skb, it's untagged in ptype_base hander and reinjected

This incosistency is fixed by this patch. Vlan untagging happens early in
__netif_receive_skb so the rest of code (ptype_all handlers, rx_handlers)
see the skb like it was untagged by hw.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>

v1->v2:
	remove "inline" from vlan_core.c functions
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 173 deletions

diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index b84a46b30c0c..d174c312b7f1 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -65,179 +65,6 @@ static int vlan_dev_rebuild_header(struct sk_buff *skb)
 	return 0;
 }
 
-static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
-{
-	if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
-		if (skb_cow(skb, skb_headroom(skb)) < 0)
-			skb = NULL;
-		if (skb) {
-			/* Lifted from Gleb's VLAN code... */
-			memmove(skb->data - ETH_HLEN,
-				skb->data - VLAN_ETH_HLEN, 12);
-			skb->mac_header += VLAN_HLEN;
-		}
-	}
-
-	return skb;
-}
-
-static inline void vlan_set_encap_proto(struct sk_buff *skb,
-		struct vlan_hdr *vhdr)
-{
-	__be16 proto;
-	unsigned char *rawp;
-
-	/*
-	 * Was a VLAN packet, grab the encapsulated protocol, which the layer
-	 * three protocols care about.
-	 */
-
-	proto = vhdr->h_vlan_encapsulated_proto;
-	if (ntohs(proto) >= 1536) {
-		skb->protocol = proto;
-		return;
-	}
-
-	rawp = skb->data;
-	if (*(unsigned short *)rawp == 0xFFFF)
-		/*
-		 * This is a magic hack to spot IPX packets. Older Novell
-		 * breaks the protocol design and runs IPX over 802.3 without
-		 * an 802.2 LLC layer. We look for FFFF which isn't a used
-		 * 802.2 SSAP/DSAP. This won't work for fault tolerant netware
-		 * but does for the rest.
-		 */
-		skb->protocol = htons(ETH_P_802_3);
-	else
-		/*
-		 * Real 802.2 LLC
-		 */
-		skb->protocol = htons(ETH_P_802_2);
-}
-
-/*
- *	Determine the packet's protocol ID. The rule here is that we
- *	assume 802.3 if the type field is short enough to be a length.
- *	This is normal practice and works for any 'now in use' protocol.
- *
- *  Also, at this point we assume that we ARE dealing exclusively with
- *  VLAN packets, or packets that should be made into VLAN packets based
- *  on a default VLAN ID.
- *
- *  NOTE:  Should be similar to ethernet/eth.c.
- *
- *  SANITY NOTE:  This method is called when a packet is moving up the stack
- *                towards userland.  To get here, it would have already passed
- *                through the ethernet/eth.c eth_type_trans() method.
- *  SANITY NOTE 2: We are referencing to the VLAN_HDR frields, which MAY be
- *                 stored UNALIGNED in the memory.  RISC systems don't like
- *                 such cases very much...
- *  SANITY NOTE 2a: According to Dave Miller & Alexey, it will always be
- *  		    aligned, so there doesn't need to be any of the unaligned
- *  		    stuff.  It has been commented out now...  --Ben
- *
- */
-int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
-		  struct packet_type *ptype, struct net_device *orig_dev)
-{
-	struct vlan_hdr *vhdr;
-	struct vlan_pcpu_stats *rx_stats;
-	struct net_device *vlan_dev;
-	u16 vlan_id;
-	u16 vlan_tci;
-
-	skb = skb_share_check(skb, GFP_ATOMIC);
-	if (skb == NULL)
-		goto err_free;
-
-	if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
-		goto err_free;
-
-	vhdr = (struct vlan_hdr *)skb->data;
-	vlan_tci = ntohs(vhdr->h_vlan_TCI);
-	vlan_id = vlan_tci & VLAN_VID_MASK;
-
-	rcu_read_lock();
-	vlan_dev = vlan_find_dev(dev, vlan_id);
-
-	/* If the VLAN device is defined, we use it.
-	 * If not, and the VID is 0, it is a 802.1p packet (not
-	 * really a VLAN), so we will just netif_rx it later to the
-	 * original interface, but with the skb->proto set to the
-	 * wrapped proto: we do nothing here.
-	 */
-
-	if (!vlan_dev) {
-		if (vlan_id) {
-			pr_debug("%s: ERROR: No net_device for VID: %u on dev: %s\n",
-				 __func__, vlan_id, dev->name);
-			goto err_unlock;
-		}
-		rx_stats = NULL;
-	} else {
-		skb->dev = vlan_dev;
-
-		rx_stats = this_cpu_ptr(vlan_dev_info(skb->dev)->vlan_pcpu_stats);
-
-		u64_stats_update_begin(&rx_stats->syncp);
-		rx_stats->rx_packets++;
-		rx_stats->rx_bytes += skb->len;
-
-		skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tci);
-
-		pr_debug("%s: priority: %u for TCI: %hu\n",
-			 __func__, skb->priority, vlan_tci);
-
-		switch (skb->pkt_type) {
-		case PACKET_BROADCAST:
-			/* Yeah, stats collect these together.. */
-			/* stats->broadcast ++; // no such counter :-( */
-			break;
-
-		case PACKET_MULTICAST:
-			rx_stats->rx_multicast++;
-			break;
-
-		case PACKET_OTHERHOST:
-			/* Our lower layer thinks this is not local, let's make
-			 * sure.
-			 * This allows the VLAN to have a different MAC than the
-			 * underlying device, and still route correctly.
-			 */
-			if (!compare_ether_addr(eth_hdr(skb)->h_dest,
-						skb->dev->dev_addr))
-				skb->pkt_type = PACKET_HOST;
-			break;
-		default:
-			break;
-		}
-		u64_stats_update_end(&rx_stats->syncp);
-	}
-
-	skb_pull_rcsum(skb, VLAN_HLEN);
-	vlan_set_encap_proto(skb, vhdr);
-
-	if (vlan_dev) {
-		skb = vlan_check_reorder_header(skb);
-		if (!skb) {
-			rx_stats->rx_errors++;
-			goto err_unlock;
-		}
-	}
-
-	netif_rx(skb);
-
-	rcu_read_unlock();
-	return NET_RX_SUCCESS;
-
-err_unlock:
-	rcu_read_unlock();
-err_free:
-	atomic_long_inc(&dev->rx_dropped);
-	kfree_skb(skb);
-	return NET_RX_DROP;
-}
-
 static inline u16
 vlan_dev_get_egress_qos_mask(struct net_device *dev, struct sk_buff *skb)
 {