diff options
| author | Ron Diskin <rondi@mellanox.com> | 2020-04-05 13:58:40 +0300 |
|---|---|---|
| committer | Saeed Mahameed <saeedm@mellanox.com> | 2020-07-28 12:55:51 -0700 |
| commit | 7d0314b11cdd92bca8b89684c06953bf114605fc (patch) | |
| tree | 308c4d4fa185fc12691921d95d7aa8d873c704a7 /include | |
| parent | ed56d749c366be269d58b29597392e4a0ae71c0a (diff) | |
| download | linux-7d0314b11cdd92bca8b89684c06953bf114605fc.tar.gz | |
net/mlx5e: Modify uplink state on interface up/down
When setting the PF interface up/down, notify the firmware to update
uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled.
This behavior will prevent sending traffic out on uplink port when PF is
down, such as sending traffic from a VF interface which is still up.
Currently when calling mlx5e_open/close(), the driver only sends PAOS
command to notify the firmware to set the physical port state to
up/down, however, it is not sufficient. When VF is in "auto" state, it
follows the uplink state, which was not updated on mlx5e_open/close()
before this patch.
When switchdev mode is enabled and uplink representor is first enabled,
set the uplink port state value back to its FW default "AUTO".
Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down")
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mlx5/mlx5_ifc.h | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 073b79eacc99..1340e02b14ef 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -4381,6 +4381,7 @@ struct mlx5_ifc_query_vport_state_out_bits { enum { MLX5_VPORT_STATE_OP_MOD_VNIC_VPORT = 0x0, MLX5_VPORT_STATE_OP_MOD_ESW_VPORT = 0x1, + MLX5_VPORT_STATE_OP_MOD_UPLINK = 0x2, }; struct mlx5_ifc_arm_monitor_counter_in_bits { |