Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio updates from Rusty Russell:
 "OK, this has the big virtio 1.0 implementation, as specified by OASIS.

  On top of tht is the major rework of lguest, to use PCI and virtio
  1.0, to double-check the implementation.

  Then comes the inevitable fixes and cleanups from that work"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits)
  virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice.
  virtio_net: unconditionally define struct virtio_net_hdr_v1.
  tools/lguest: don't use legacy definitions for net device in example launcher.
  virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined.
  tools/lguest: use common error macros in the example launcher.
  tools/lguest: give virtqueues names for better error messages
  tools/lguest: more documentation and checking of virtio 1.0 compliance.
  lguest: don't look in console features to find emerg_wr.
  tools/lguest: don't start devices until DRIVER_OK status set.
  tools/lguest: handle indirect partway through chain.
  tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI)
  tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI)
  tools/lguest: rename virtio_pci_cfg_cap field to match spec.
  tools/lguest: fix features_accepted logic in example launcher.
  tools/lguest: handle device reset correctly in example launcher.
  virtual: Documentation: simplify and generalize paravirt_ops.txt
  lguest: remove NOTIFY call and eventfd facility.
  lguest: remove NOTIFY facility from demonstration launcher.
  lguest: use the PCI console device's emerg_wr for early boot messages.
  lguest: always put console in PCI slot #1.
  ...

8 files changed, 204 insertions, 68 deletions

diff --git a/include/asm-generic/pci_iomap.h b/include/asm-generic/pci_iomap.h
index ce37349860fe..7389c87116a0 100644
--- a/include/asm-generic/pci_iomap.h
+++ b/include/asm-generic/pci_iomap.h
@@ -15,6 +15,9 @@ struct pci_dev;
 #ifdef CONFIG_PCI
 /* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
 extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void __iomem *pci_iomap_range(struct pci_dev *dev, int bar,
+				     unsigned long offset,
+				     unsigned long maxlen);
 /* Create a virtual mapping cookie for a port on a given PCI device.
  * Do not call this directly, it exists to make it easier for architectures
  * to override */
@@ -30,6 +33,13 @@ static inline void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned lon
 {
 	return NULL;
 }
+
+static inline void __iomem *pci_iomap_range(struct pci_dev *dev, int bar,
+					    unsigned long offset,
+					    unsigned long maxlen)
+{
+	return NULL;
+}
 #endif
 
 #endif /* __ASM_GENERIC_IO_H */
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index 495203ff221c..acd5b12565cc 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -8,52 +8,13 @@
  *
  * The Guest needs devices to do anything useful.  Since we don't let it touch
  * real devices (think of the damage it could do!) we provide virtual devices.
- * We could emulate a PCI bus with various devices on it, but that is a fairly
- * complex burden for the Host and suboptimal for the Guest, so we have our own
- * simple lguest bus and we use "virtio" drivers.  These drivers need a set of
- * routines from us which will actually do the virtual I/O, but they handle all
- * the net/block/console stuff themselves.  This means that if we want to add
- * a new device, we simply need to write a new virtio driver and create support
- * for it in the Launcher: this code won't need to change.
+ * We emulate a PCI bus with virtio devices on it; we used to have our own
+ * lguest bus which was far simpler, but this tests the virtio 1.0 standard.
  *
  * Virtio devices are also used by kvm, so we can simply reuse their optimized
  * device drivers.  And one day when everyone uses virtio, my plan will be
  * complete.  Bwahahahah!
- *
- * Devices are described by a simplified ID, a status byte, and some "config"
- * bytes which describe this device's configuration.  This is placed by the
- * Launcher just above the top of physical memory:
- */
-struct lguest_device_desc {
-	/* The device type: console, network, disk etc.  Type 0 terminates. */
-	__u8 type;
-	/* The number of virtqueues (first in config array) */
-	__u8 num_vq;
-	/*
-	 * The number of bytes of feature bits.  Multiply by 2: one for host
-	 * features and one for Guest acknowledgements.
-	 */
-	__u8 feature_len;
-	/* The number of bytes of the config array after virtqueues. */
-	__u8 config_len;
-	/* A status byte, written by the Guest. */
-	__u8 status;
-	__u8 config[0];
-};
-
-/*D:135
- * This is how we expect the device configuration field for a virtqueue
- * to be laid out in config space.
  */
-struct lguest_vqconfig {
-	/* The number of entries in the virtio_ring */
-	__u16 num;
-	/* The interrupt we get when something happens. */
-	__u16 irq;
-	/* The page number of the virtio ring for this device. */
-	__u32 pfn;
-};
-/*:*/
 
 /* Write command first word is a request. */
 enum lguest_req
@@ -62,12 +23,22 @@ enum lguest_req
 	LHREQ_GETDMA, /* No longer used */
 	LHREQ_IRQ, /* + irq */
 	LHREQ_BREAK, /* No longer used */
-	LHREQ_EVENTFD, /* + address, fd. */
+	LHREQ_EVENTFD, /* No longer used. */
+	LHREQ_GETREG, /* + offset within struct pt_regs (then read value). */
+	LHREQ_SETREG, /* + offset within struct pt_regs, value. */
+	LHREQ_TRAP, /* + trap number to deliver to guest. */
 };
 
 /*
- * The alignment to use between consumer and producer parts of vring.
- * x86 pagesize for historical reasons.
+ * This is what read() of the lguest fd populates.  trap ==
+ * LGUEST_TRAP_ENTRY for an LHCALL_NOTIFY (addr is the
+ * argument), 14 for a page fault in the MMIO region (addr is
+ * the trap address, insn is the instruction), or 13 for a GPF
+ * (insn is the instruction).
  */
-#define LGUEST_VRING_ALIGN	4096
+struct lguest_pending {
+	__u8 trap;
+	__u8 insn[7];
+	__u32 addr;
+};
 #endif /* _LINUX_LGUEST_LAUNCHER */
diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h
index 5c7b6f0daef8..c4b09689ab64 100644
--- a/include/linux/virtio_mmio.h
+++ b/include/linux/virtio_mmio.h
@@ -51,23 +51,29 @@
 /* Virtio vendor ID - Read Only */
 #define VIRTIO_MMIO_VENDOR_ID		0x00c
 
-/* Bitmask of the features supported by the host
+/* Bitmask of the features supported by the device (host)
  * (32 bits per set) - Read Only */
-#define VIRTIO_MMIO_HOST_FEATURES	0x010
+#define VIRTIO_MMIO_DEVICE_FEATURES	0x010
 
-/* Host features set selector - Write Only */
-#define VIRTIO_MMIO_HOST_FEATURES_SEL	0x014
+/* Device (host) features set selector - Write Only */
+#define VIRTIO_MMIO_DEVICE_FEATURES_SEL	0x014
 
-/* Bitmask of features activated by the guest
+/* Bitmask of features activated by the driver (guest)
  * (32 bits per set) - Write Only */
-#define VIRTIO_MMIO_GUEST_FEATURES	0x020
+#define VIRTIO_MMIO_DRIVER_FEATURES	0x020
 
 /* Activated features set selector - Write Only */
-#define VIRTIO_MMIO_GUEST_FEATURES_SEL	0x024
+#define VIRTIO_MMIO_DRIVER_FEATURES_SEL	0x024
+
+
+#ifndef VIRTIO_MMIO_NO_LEGACY /* LEGACY DEVICES ONLY! */
 
 /* Guest's memory page size in bytes - Write Only */
 #define VIRTIO_MMIO_GUEST_PAGE_SIZE	0x028
 
+#endif
+
+
 /* Queue selector - Write Only */
 #define VIRTIO_MMIO_QUEUE_SEL		0x030
 
@@ -77,12 +83,21 @@
 /* Queue size for the currently selected queue - Write Only */
 #define VIRTIO_MMIO_QUEUE_NUM		0x038
 
+
+#ifndef VIRTIO_MMIO_NO_LEGACY /* LEGACY DEVICES ONLY! */
+
 /* Used Ring alignment for the currently selected queue - Write Only */
 #define VIRTIO_MMIO_QUEUE_ALIGN		0x03c
 
 /* Guest's PFN for the currently selected queue - Read Write */
 #define VIRTIO_MMIO_QUEUE_PFN		0x040
 
+#endif
+
+
+/* Ready bit for the currently selected queue - Read Write */
+#define VIRTIO_MMIO_QUEUE_READY		0x044
+
 /* Queue notifier - Write Only */
 #define VIRTIO_MMIO_QUEUE_NOTIFY	0x050
 
@@ -95,6 +110,21 @@
 /* Device status register - Read Write */
 #define VIRTIO_MMIO_STATUS		0x070
 
+/* Selected queue's Descriptor Table address, 64 bits in two halves */
+#define VIRTIO_MMIO_QUEUE_DESC_LOW	0x080
+#define VIRTIO_MMIO_QUEUE_DESC_HIGH	0x084
+
+/* Selected queue's Available Ring address, 64 bits in two halves */
+#define VIRTIO_MMIO_QUEUE_AVAIL_LOW	0x090
+#define VIRTIO_MMIO_QUEUE_AVAIL_HIGH	0x094
+
+/* Selected queue's Used Ring address, 64 bits in two halves */
+#define VIRTIO_MMIO_QUEUE_USED_LOW	0x0a0
+#define VIRTIO_MMIO_QUEUE_USED_HIGH	0x0a4
+
+/* Configuration atomicity value */
+#define VIRTIO_MMIO_CONFIG_GENERATION	0x0fc
+
 /* The config space is defined by each driver as
  * the per-driver configuration space - Read Write */
 #define VIRTIO_MMIO_CONFIG		0x100
diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
index be40f7059e93..4b0488f20b2e 100644
--- a/include/uapi/linux/virtio_balloon.h
+++ b/include/uapi/linux/virtio_balloon.h
@@ -36,8 +36,7 @@
 /* Size of a PFN in the balloon interface. */
 #define VIRTIO_BALLOON_PFN_SHIFT 12
 
-struct virtio_balloon_config
-{
+struct virtio_balloon_config {
 	/* Number of pages host wants Guest to give up. */
 	__le32 num_pages;
 	/* Number of pages we've actually got in balloon. */
diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h
index 247c8ba8544a..3c53eec4ae22 100644
--- a/include/uapi/linux/virtio_blk.h
+++ b/include/uapi/linux/virtio_blk.h
@@ -31,22 +31,25 @@
 #include <linux/virtio_types.h>
 
 /* Feature bits */
-#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
 #define VIRTIO_BLK_F_SIZE_MAX	1	/* Indicates maximum segment size */
 #define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
 #define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
 #define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
 #define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
-#define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
-#define VIRTIO_BLK_F_WCE	9	/* Writeback mode enabled after reset */
 #define VIRTIO_BLK_F_TOPOLOGY	10	/* Topology information is available */
-#define VIRTIO_BLK_F_CONFIG_WCE	11	/* Writeback mode available in config */
 #define VIRTIO_BLK_F_MQ		12	/* support more than one vq */
 
+/* Legacy feature bits */
+#ifndef VIRTIO_BLK_NO_LEGACY
+#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
+#define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
+#define VIRTIO_BLK_F_WCE	9	/* Writeback mode enabled after reset */
+#define VIRTIO_BLK_F_CONFIG_WCE	11	/* Writeback mode available in config */
 #ifndef __KERNEL__
 /* Old (deprecated) name for VIRTIO_BLK_F_WCE. */
 #define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE
 #endif
+#endif /* !VIRTIO_BLK_NO_LEGACY */
 
 #define VIRTIO_BLK_ID_BYTES	20	/* ID string length */
 
@@ -100,8 +103,10 @@ struct virtio_blk_config {
 #define VIRTIO_BLK_T_IN		0
 #define VIRTIO_BLK_T_OUT	1
 
+#ifndef VIRTIO_BLK_NO_LEGACY
 /* This bit says it's a scsi command, not an actual read or write. */
 #define VIRTIO_BLK_T_SCSI_CMD	2
+#endif /* VIRTIO_BLK_NO_LEGACY */
 
 /* Cache flush command */
 #define VIRTIO_BLK_T_FLUSH	4
@@ -109,8 +114,10 @@ struct virtio_blk_config {
 /* Get device ID command */
 #define VIRTIO_BLK_T_GET_ID    8
 
+#ifndef VIRTIO_BLK_NO_LEGACY
 /* Barrier before this op. */
 #define VIRTIO_BLK_T_BARRIER	0x80000000
+#endif /* !VIRTIO_BLK_NO_LEGACY */
 
 /* This is the first element of the read scatter-gather list. */
 struct virtio_blk_outhdr {
@@ -122,12 +129,14 @@ struct virtio_blk_outhdr {
 	__virtio64 sector;
 };
 
+#ifndef VIRTIO_BLK_NO_LEGACY
 struct virtio_scsi_inhdr {
 	__virtio32 errors;
 	__virtio32 data_len;
 	__virtio32 sense_len;
 	__virtio32 residual;
 };
+#endif /* !VIRTIO_BLK_NO_LEGACY */
 
 /* And this is the final byte of the write scatter-gather list. */
 #define VIRTIO_BLK_S_OK		0
diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
index a6d0cdeaacd4..c18264df9504 100644
--- a/include/uapi/linux/virtio_config.h
+++ b/include/uapi/linux/virtio_config.h
@@ -49,12 +49,14 @@
 #define VIRTIO_TRANSPORT_F_START	28
 #define VIRTIO_TRANSPORT_F_END		33
 
+#ifndef VIRTIO_CONFIG_NO_LEGACY
 /* Do we get callbacks when the ring is completely used, even if we've
  * suppressed them? */
 #define VIRTIO_F_NOTIFY_ON_EMPTY	24
 
 /* Can the device handle any descriptor layout? */
 #define VIRTIO_F_ANY_LAYOUT		27
+#endif /* VIRTIO_CONFIG_NO_LEGACY */
 
 /* v1.0 compliant. */
 #define VIRTIO_F_VERSION_1		32
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index b5f1677b291c..7bbee79ca293 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -35,7 +35,6 @@
 #define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
 #define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
 #define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
-#define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
 #define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
 #define VIRTIO_NET_F_GUEST_TSO6	8	/* Guest can handle TSOv6 in. */
 #define VIRTIO_NET_F_GUEST_ECN	9	/* Guest can handle TSO[6] w/ ECN in. */
@@ -56,6 +55,10 @@
 					 * Steering */
 #define VIRTIO_NET_F_CTRL_MAC_ADDR 23	/* Set MAC address */
 
+#ifndef VIRTIO_NET_NO_LEGACY
+#define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
+#endif /* VIRTIO_NET_NO_LEGACY */
+
 #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
 #define VIRTIO_NET_S_ANNOUNCE	2	/* Announcement is needed */
 
@@ -71,19 +74,39 @@ struct virtio_net_config {
 	__u16 max_virtqueue_pairs;
 } __attribute__((packed));
 
+/*
+ * This header comes first in the scatter-gather list.  If you don't
+ * specify GSO or CSUM features, you can simply ignore the header.
+ *
+ * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf,
+ * only flattened.
+ */
+struct virtio_net_hdr_v1 {
+#define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	/* Use csum_start, csum_offset */
+#define VIRTIO_NET_HDR_F_DATA_VALID	2	/* Csum is valid */
+	__u8 flags;
+#define VIRTIO_NET_HDR_GSO_NONE		0	/* Not a GSO frame */
+#define VIRTIO_NET_HDR_GSO_TCPV4	1	/* GSO frame, IPv4 TCP (TSO) */
+#define VIRTIO_NET_HDR_GSO_UDP		3	/* GSO frame, IPv4 UDP (UFO) */
+#define VIRTIO_NET_HDR_GSO_TCPV6	4	/* GSO frame, IPv6 TCP */
+#define VIRTIO_NET_HDR_GSO_ECN		0x80	/* TCP has ECN set */
+	__u8 gso_type;
+	__virtio16 hdr_len;	/* Ethernet + IP + tcp/udp hdrs */
+	__virtio16 gso_size;	/* Bytes to append to hdr_len per frame */
+	__virtio16 csum_start;	/* Position to start checksumming from */
+	__virtio16 csum_offset;	/* Offset after that to place checksum */
+	__virtio16 num_buffers;	/* Number of merged rx buffers */
+};
+
+#ifndef VIRTIO_NET_NO_LEGACY
 /* This header comes first in the scatter-gather list.
- * If VIRTIO_F_ANY_LAYOUT is not negotiated, it must
+ * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must
  * be the first element of the scatter-gather list.  If you don't
  * specify GSO or CSUM features, you can simply ignore the header. */
 struct virtio_net_hdr {
-#define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
-#define VIRTIO_NET_HDR_F_DATA_VALID	2	// Csum is valid
+	/* See VIRTIO_NET_HDR_F_* */
 	__u8 flags;
-#define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
-#define VIRTIO_NET_HDR_GSO_TCPV4	1	// GSO frame, IPv4 TCP (TSO)
-#define VIRTIO_NET_HDR_GSO_UDP		3	// GSO frame, IPv4 UDP (UFO)
-#define VIRTIO_NET_HDR_GSO_TCPV6	4	// GSO frame, IPv6 TCP
-#define VIRTIO_NET_HDR_GSO_ECN		0x80	// TCP has ECN set
+	/* See VIRTIO_NET_HDR_GSO_* */
 	__u8 gso_type;
 	__virtio16 hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
 	__virtio16 gso_size;		/* Bytes to append to hdr_len per frame */
@@ -97,6 +120,7 @@ struct virtio_net_hdr_mrg_rxbuf {
 	struct virtio_net_hdr hdr;
 	__virtio16 num_buffers;	/* Number of merged rx buffers */
 };
+#endif /* ...VIRTIO_NET_NO_LEGACY */
 
 /*
  * Control virtqueue data structures
diff --git a/include/uapi/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h
index 35b552c7f330..75301468359f 100644
--- a/include/uapi/linux/virtio_pci.h
+++ b/include/uapi/linux/virtio_pci.h
@@ -39,7 +39,7 @@
 #ifndef _LINUX_VIRTIO_PCI_H
 #define _LINUX_VIRTIO_PCI_H
 
-#include <linux/virtio_config.h>
+#include <linux/types.h>
 
 #ifndef VIRTIO_PCI_NO_LEGACY
 
@@ -99,4 +99,95 @@
 /* Vector value used to disable MSI for queue */
 #define VIRTIO_MSI_NO_VECTOR            0xffff
 
+#ifndef VIRTIO_PCI_NO_MODERN
+
+/* IDs for different capabilities.  Must all exist. */
+
+/* Common configuration */
+#define VIRTIO_PCI_CAP_COMMON_CFG	1
+/* Notifications */
+#define VIRTIO_PCI_CAP_NOTIFY_CFG	2
+/* ISR access */
+#define VIRTIO_PCI_CAP_ISR_CFG		3
+/* Device specific configuration */
+#define VIRTIO_PCI_CAP_DEVICE_CFG	4
+/* PCI configuration access */
+#define VIRTIO_PCI_CAP_PCI_CFG		5
+
+/* This is the PCI capability header: */
+struct virtio_pci_cap {
+	__u8 cap_vndr;		/* Generic PCI field: PCI_CAP_ID_VNDR */
+	__u8 cap_next;		/* Generic PCI field: next ptr. */
+	__u8 cap_len;		/* Generic PCI field: capability length */
+	__u8 cfg_type;		/* Identifies the structure. */
+	__u8 bar;		/* Where to find it. */
+	__u8 padding[3];	/* Pad to full dword. */
+	__le32 offset;		/* Offset within bar. */
+	__le32 length;		/* Length of the structure, in bytes. */
+};
+
+struct virtio_pci_notify_cap {
+	struct virtio_pci_cap cap;
+	__le32 notify_off_multiplier;	/* Multiplier for queue_notify_off. */
+};
+
+/* Fields in VIRTIO_PCI_CAP_COMMON_CFG: */
+struct virtio_pci_common_cfg {
+	/* About the whole device. */
+	__le32 device_feature_select;	/* read-write */
+	__le32 device_feature;		/* read-only */
+	__le32 guest_feature_select;	/* read-write */
+	__le32 guest_feature;		/* read-write */
+	__le16 msix_config;		/* read-write */
+	__le16 num_queues;		/* read-only */
+	__u8 device_status;		/* read-write */
+	__u8 config_generation;		/* read-only */
+
+	/* About a specific virtqueue. */
+	__le16 queue_select;		/* read-write */
+	__le16 queue_size;		/* read-write, power of 2. */
+	__le16 queue_msix_vector;	/* read-write */
+	__le16 queue_enable;		/* read-write */
+	__le16 queue_notify_off;	/* read-only */
+	__le32 queue_desc_lo;		/* read-write */
+	__le32 queue_desc_hi;		/* read-write */
+	__le32 queue_avail_lo;		/* read-write */
+	__le32 queue_avail_hi;		/* read-write */
+	__le32 queue_used_lo;		/* read-write */
+	__le32 queue_used_hi;		/* read-write */
+};
+
+/* Macro versions of offsets for the Old Timers! */
+#define VIRTIO_PCI_CAP_VNDR		0
+#define VIRTIO_PCI_CAP_NEXT		1
+#define VIRTIO_PCI_CAP_LEN		2
+#define VIRTIO_PCI_CAP_CFG_TYPE		3
+#define VIRTIO_PCI_CAP_BAR		4
+#define VIRTIO_PCI_CAP_OFFSET		8
+#define VIRTIO_PCI_CAP_LENGTH		12
+
+#define VIRTIO_PCI_NOTIFY_CAP_MULT	16
+
+#define VIRTIO_PCI_COMMON_DFSELECT	0
+#define VIRTIO_PCI_COMMON_DF		4
+#define VIRTIO_PCI_COMMON_GFSELECT	8
+#define VIRTIO_PCI_COMMON_GF		12
+#define VIRTIO_PCI_COMMON_MSIX		16
+#define VIRTIO_PCI_COMMON_NUMQ		18
+#define VIRTIO_PCI_COMMON_STATUS	20
+#define VIRTIO_PCI_COMMON_CFGGENERATION	21
+#define VIRTIO_PCI_COMMON_Q_SELECT	22
+#define VIRTIO_PCI_COMMON_Q_SIZE	24
+#define VIRTIO_PCI_COMMON_Q_MSIX	26
+#define VIRTIO_PCI_COMMON_Q_ENABLE	28
+#define VIRTIO_PCI_COMMON_Q_NOFF	30
+#define VIRTIO_PCI_COMMON_Q_DESCLO	32
+#define VIRTIO_PCI_COMMON_Q_DESCHI	36
+#define VIRTIO_PCI_COMMON_Q_AVAILLO	40
+#define VIRTIO_PCI_COMMON_Q_AVAILHI	44
+#define VIRTIO_PCI_COMMON_Q_USEDLO	48
+#define VIRTIO_PCI_COMMON_Q_USEDHI	52
+
+#endif /* VIRTIO_PCI_NO_MODERN */
+
 #endif