Merge tag 'mmc-updates-for-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.11:

  Core:
   - Add support for eMMC 5.1 devices
   - Add MMC_CAP_AGGRESSIVE_PM capability for aggressive power
     management of eMMC/SD between requests, using runtime PM
   - Add an ioctl to perform the eMMC 4.5 Sanitize command.  Sample code
     at:

       git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git

  Drivers:
   - dw_mmc: Add support for Rockchip's Cortex-A9 SoCs
   - dw_mmc: Add support for Altera SoCFPGAs
   - sdhci-esdhc-imx: Add support for 8-bit bus width, non-removable
     cards
   - sdhci-bcm-kona: New driver for Broadcom Kona (281xx) SoCs
   - sdhi/tmio: Add DT DMA support"

* tag 'mmc-updates-for-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (87 commits)
  mmc: bcm281xx SDHCI driver
  mmc: sdhci: add card_event callback to sdhci
  mmc: core: Fixup Oops for SDIO shutdown
  mmc: sdhci-pci: add another device id
  mmc: esdhc: Fix bug when writing to SDHCI_HOST_CONTROL register
  mmc: esdhc: Add support for 8-bit bus width and non-removable card
  mmc: core: production year for eMMC 4.41 and later
  mmc: omap: remove unnecessary #if 0's
  mmc: sdhci: fix ctrl_2 on super-speed selection
  mmc: dw_mmc-pltfm: add Rockchip variant
  mmc: dw_mmc-pltfm: move probe and remove below dt match table
  mmc: dw_mmc-pltfm: remove static from dw_mci_pltfm_remove
  mmc: sdhci-acpi: add support for eMMC hardware reset for HID 80860F14
  mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC.
  mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA
  mmc: sdhci: fix caps2 for HS200
  sdhci-pxav3: Fix runtime PM initialization
  mmc: core: Add DT-bindings for MMC_CAP2_FULL_PWR_CYCLE
  mmc: core: Invent MMC_CAP2_FULL_PWR_CYCLE
  mmc: core: Enable power_off_notify for eMMC shutdown sequence
  ...

6 files changed, 30 insertions, 10 deletions

diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 99bf3e665997..ce3511326f80 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -81,10 +81,15 @@ int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
 void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
 void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
 
+struct dma_chan;
+
 struct tmio_mmc_dma {
 	void *chan_priv_tx;
 	void *chan_priv_rx;
+	int slave_id_tx;
+	int slave_id_rx;
 	int alignment_shift;
+	bool (*filter)(struct dma_chan *chan, void *arg);
 };
 
 struct tmio_mmc_host;
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index f31725ba49f3..842de3e21e70 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -94,7 +94,11 @@ struct mmc_ext_csd {
 	u8			raw_ext_csd_structure;	/* 194 */
 	u8			raw_card_type;		/* 196 */
 	u8			out_of_int_time;	/* 198 */
-	u8			raw_s_a_timeout;		/* 217 */
+	u8			raw_pwr_cl_52_195;	/* 200 */
+	u8			raw_pwr_cl_26_195;	/* 201 */
+	u8			raw_pwr_cl_52_360;	/* 202 */
+	u8			raw_pwr_cl_26_360;	/* 203 */
+	u8			raw_s_a_timeout;	/* 217 */
 	u8			raw_hc_erase_gap_size;	/* 221 */
 	u8			raw_erase_timeout_mult;	/* 223 */
 	u8			raw_hc_erase_grp_size;	/* 224 */
@@ -102,6 +106,10 @@ struct mmc_ext_csd {
 	u8			raw_sec_erase_mult;	/* 230 */
 	u8			raw_sec_feature_support;/* 231 */
 	u8			raw_trim_mult;		/* 232 */
+	u8			raw_pwr_cl_200_195;	/* 236 */
+	u8			raw_pwr_cl_200_360;	/* 237 */
+	u8			raw_pwr_cl_ddr_52_195;	/* 238 */
+	u8			raw_pwr_cl_ddr_52_360;	/* 239 */
 	u8			raw_bkops_status;	/* 246 */
 	u8			raw_sectors[4];		/* 212 - 4 bytes */
 
@@ -512,6 +520,7 @@ struct mmc_driver {
 	void (*remove)(struct mmc_card *);
 	int (*suspend)(struct mmc_card *);
 	int (*resume)(struct mmc_card *);
+	void (*shutdown)(struct mmc_card *);
 };
 
 extern int mmc_register_driver(struct mmc_driver *);
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 39613b9a6fc5..443243b241d5 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -96,6 +96,8 @@ struct mmc_command {
  */
 
 	unsigned int		cmd_timeout_ms;	/* in milliseconds */
+	/* Set this flag only for blocking sanitize request */
+	bool			sanitize_busy;
 
 	struct mmc_data		*data;		/* data segment associated with cmd */
 	struct mmc_request	*mrq;		/* associated request */
@@ -188,6 +190,9 @@ extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
 extern void mmc_release_host(struct mmc_host *host);
 extern int mmc_try_claim_host(struct mmc_host *host);
 
+extern void mmc_get_card(struct mmc_card *card);
+extern void mmc_put_card(struct mmc_card *card);
+
 extern int mmc_flush_cache(struct mmc_card *);
 
 extern int mmc_detect_card_removed(struct mmc_host *host);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index e326ae2882a0..3b0c33ae13e1 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -239,7 +239,7 @@ struct mmc_host {
 #define MMC_CAP_SPI		(1 << 4)	/* Talks only SPI protocols */
 #define MMC_CAP_NEEDS_POLL	(1 << 5)	/* Needs polling for card-detection */
 #define MMC_CAP_8_BIT_DATA	(1 << 6)	/* Can the host do 8 bit transfers */
-
+#define MMC_CAP_AGGRESSIVE_PM	(1 << 7)	/* Suspend (e)MMC/SD at idle  */
 #define MMC_CAP_NONREMOVABLE	(1 << 8)	/* Nonremovable e.g. eMMC */
 #define MMC_CAP_WAIT_WHILE_BUSY	(1 << 9)	/* Waits while card is busy */
 #define MMC_CAP_ERASE		(1 << 10)	/* Allow erase/trim commands */
@@ -264,7 +264,7 @@ struct mmc_host {
 
 #define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
 #define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
-#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2)	/* Notify poweroff supported */
+#define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
 #define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
 #define MMC_CAP2_NO_SLEEP_CMD	(1 << 4)	/* Don't allow sleep command */
 #define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
@@ -272,7 +272,6 @@ struct mmc_host {
 #define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
 				 MMC_CAP2_HS200_1_2V_SDR)
 #define MMC_CAP2_BROKEN_VOLTAGE	(1 << 7)	/* Use the broken voltage */
-#define MMC_CAP2_DETECT_ON_ERR	(1 << 8)	/* On I/O err check card removal */
 #define MMC_CAP2_HC_ERASE_SZ	(1 << 9)	/* High-capacity erase size */
 #define MMC_CAP2_CD_ACTIVE_HIGH	(1 << 10)	/* Card-detect signal active high */
 #define MMC_CAP2_RO_ACTIVE_HIGH	(1 << 11)	/* Write-protect signal active high */
@@ -281,6 +280,7 @@ struct mmc_host {
 #define MMC_CAP2_PACKED_CMD	(MMC_CAP2_PACKED_RD | \
 				 MMC_CAP2_PACKED_WR)
 #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14)	/* Don't power up before scan */
+#define MMC_CAP2_SANITIZE	(1 << 15)		/* Support Sanitize */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
@@ -369,7 +369,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *);
 int mmc_add_host(struct mmc_host *);
 void mmc_remove_host(struct mmc_host *);
 void mmc_free_host(struct mmc_host *);
-void mmc_of_parse(struct mmc_host *host);
+int mmc_of_parse(struct mmc_host *host);
 
 static inline void *mmc_priv(struct mmc_host *host)
 {
@@ -425,10 +425,6 @@ static inline int mmc_regulator_get_supply(struct mmc_host *mmc)
 }
 #endif
 
-int mmc_card_awake(struct mmc_host *host);
-int mmc_card_sleep(struct mmc_host *host);
-int mmc_card_can_sleep(struct mmc_host *host);
-
 int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
 
 /* Module parameter */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index b838ffc49e4a..e3c6a74d980a 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -95,6 +95,9 @@ struct sdhci_host {
 /* The system physically doesn't support 1.8v, even if the host does */
 #define SDHCI_QUIRK2_NO_1_8_V				(1<<2)
 #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN		(1<<3)
+#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON		(1<<4)
+/* Controller has a non-standard host control register */
+#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
@@ -126,7 +129,7 @@ struct sdhci_host {
 #define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
 #define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
 #define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
-#define SDHCI_HS200_NEEDS_TUNING (1<<10)	/* HS200 needs tuning */
+#define SDHCI_SDR104_NEEDS_TUNING (1<<10)	/* SDR104/HS200 needs tuning */
 #define SDHCI_USING_RETUNING_TIMER (1<<11)	/* Host is using a retuning timer for the card */
 
 	unsigned int version;	/* SDHCI spec. version */
@@ -139,6 +142,7 @@ struct sdhci_host {
 	u8 pwr;			/* Current voltage */
 
 	bool runtime_suspended;	/* Host is runtime suspended */
+	bool bus_on;		/* Bus power prevents runtime suspend */
 
 	struct mmc_request *mrq;	/* Current request */
 	struct mmc_command *cmd;	/* Current command */
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
index b4a0521ce411..d44912d81578 100644
--- a/include/linux/platform_data/mmc-esdhc-imx.h
+++ b/include/linux/platform_data/mmc-esdhc-imx.h
@@ -40,5 +40,6 @@ struct esdhc_platform_data {
 	enum wp_types wp_type;
 	enum cd_types cd_type;
 	int max_bus_width;
+	unsigned int f_max;
 };
 #endif /* __ASM_ARCH_IMX_ESDHC_H */