Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd

Pull MTD updates from Boris Brezillon:
 "General updates:
   - Constify pci_device_id in various drivers
   - Constify device_type
   - Remove pad control code from the Gemini driver
   - Use %pOF to print OF node full_name
   - Various fixes in the physmap_of driver
   - Remove unused vars in mtdswap
   - Check devm_kzalloc() return value in the spear_smi driver
   - Check clk_prepare_enable() return code in the st_spi_fsm driver
   - Create per MTD device debugfs enties

  NAND updates, from Boris Brezillon:
   - Fix memory leaks in the core
   - Remove unused NAND locking support
   - Rename nand.h into rawnand.h (preparing support for spi NANDs)
   - Use NAND_MAX_ID_LEN where appropriate
   - Fix support for 20nm Hynix chips
   - Fix support for Samsung and Hynix SLC NANDs
   - Various cleanup, improvements and fixes in the qcom driver
   - Fixes for bugs detected by various static code analysis tools
   - Fix mxc ooblayout definition
   - Add a new part_parsers to tmio and sharpsl platform data in order
     to define a custom list of partition parsers
   - Request the reset line in exclusive mode in the sunxi driver
   - Fix a build error in the orion-nand driver when compiled for ARMv4
   - Allow 64-bit mvebu platforms to select the PXA3XX driver

  SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
   - add support to the JEDEC JESD216B specification (SFDP tables).
   - add support to the Intel Denverton SPI flash controller.
   - fix error recovery for Spansion/Cypress SPI NOR memories.
   - fix 4-byte address management for the Aspeed SPI controller.
   - add support to some Microchip SST26 memory parts
   - remove unneeded pinctrl header Write a message for tag:"

* tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits)
  mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
  mtd: nand: make Samsung SLC NAND usable again
  mtd: nand: tmio: Register partitions using the parsers
  mfd: tmio: Add partition parsers platform data
  mtd: nand: sharpsl: Register partitions using the parsers
  mtd: nand: sharpsl: Add partition parsers platform data
  mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller
  mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
  dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
  dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
  dt-bindings: qcom_nandc: fix the ipq806x device tree example
  mtd: nand: qcom: support for different DEV_CMD register offsets
  mtd: nand: qcom: QPIC data descriptors handling
  mtd: nand: qcom: enable BAM or ADM mode
  mtd: nand: qcom: erased codeword detection configuration
  mtd: nand: qcom: support for read location registers
  mtd: nand: qcom: support for passing flags in DMA helper functions
  mtd: nand: qcom: add BAM DMA descriptor handling
  mtd: nand: qcom: allocate BAM transaction
  mtd: nand: qcom: DMA mapping support for register read buffer
  ...

11 files changed, 45 insertions, 29 deletions

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 9fdb54a95976..8acfc1e099e1 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -216,6 +216,7 @@
  * .data section
  */
 #define DATA_DATA							\
+	*(.xiptext)							\
 	*(DATA_MAIN)							\
 	*(.ref.data)							\
 	*(.data..shared_aligned) /* percpu related */			\
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index b572955e6de6..15646740e2a8 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -144,6 +144,7 @@ struct tmio_nand_data {
 	struct nand_bbt_descr	*badblock_pattern;
 	struct mtd_partition	*partition;
 	unsigned int		num_partitions;
+	const char *const	*part_parsers;
 };
 
 #define FBIO_TMIO_ACC_WRITE	0x7C639300
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index f8a2ef239c60..6cd0f6b7658b 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -206,6 +206,15 @@ struct mtd_pairing_scheme {
 
 struct module;	/* only needed for owner field in mtd_info */
 
+/**
+ * struct mtd_debug_info - debugging information for an MTD device.
+ *
+ * @dfs_dir: direntry object of the MTD device debugfs directory
+ */
+struct mtd_debug_info {
+	struct dentry *dfs_dir;
+};
+
 struct mtd_info {
 	u_char type;
 	uint32_t flags;
@@ -346,6 +355,7 @@ struct mtd_info {
 	struct module *owner;
 	struct device dev;
 	int usecount;
+	struct mtd_debug_info dbg;
 };
 
 int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
diff --git a/include/linux/mtd/nand-gpio.h b/include/linux/mtd/nand-gpio.h
index 51534e50f7fc..be4f45d89be2 100644
--- a/include/linux/mtd/nand-gpio.h
+++ b/include/linux/mtd/nand-gpio.h
@@ -1,7 +1,7 @@
 #ifndef __LINUX_MTD_NAND_GPIO_H
 #define __LINUX_MTD_NAND_GPIO_H
 
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 
 struct gpio_nand_platdata {
 	int	gpio_nce;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/rawnand.h
index 5216d2eb2289..2b05f4273bab 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1,6 +1,4 @@
 /*
- *  linux/include/linux/mtd/nand.h
- *
  *  Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
  *                        Steven J. Hill <sjhill@realitydiluted.com>
  *		          Thomas Gleixner <tglx@linutronix.de>
@@ -15,8 +13,8 @@
  * Changelog:
  *	See git changelog.
  */
-#ifndef __LINUX_MTD_NAND_H
-#define __LINUX_MTD_NAND_H
+#ifndef __LINUX_MTD_RAWNAND_H
+#define __LINUX_MTD_RAWNAND_H
 
 #include <linux/wait.h>
 #include <linux/spinlock.h>
@@ -44,12 +42,6 @@ void nand_release(struct mtd_info *mtd);
 /* Internal helper for board drivers which need to override command function */
 void nand_wait_ready(struct mtd_info *mtd);
 
-/* locks all blocks present in the device */
-int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-/* unlocks specified locked blocks */
-int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
 /* The maximum number of NAND chips in an array */
 #define NAND_MAX_CHIPS		8
 
@@ -89,10 +81,6 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 #define NAND_CMD_SET_FEATURES	0xef
 #define NAND_CMD_RESET		0xff
 
-#define NAND_CMD_LOCK		0x2a
-#define NAND_CMD_UNLOCK1	0x23
-#define NAND_CMD_UNLOCK2	0x24
-
 /* Extended commands for large page devices */
 #define NAND_CMD_READSTART	0x30
 #define NAND_CMD_RNDOUTSTART	0xE0
@@ -449,14 +437,16 @@ struct nand_jedec_params {
 	__le16 crc;
 } __packed;
 
+/* The maximum expected count of bytes in the NAND ID sequence */
+#define NAND_MAX_ID_LEN 8
+
 /**
  * struct nand_id - NAND id structure
- * @data: buffer containing the id bytes. Currently 8 bytes large, but can
- *	  be extended if required.
+ * @data: buffer containing the id bytes.
  * @len: ID length.
  */
 struct nand_id {
-	u8 data[8];
+	u8 data[NAND_MAX_ID_LEN];
 	int len;
 };
 
@@ -1028,8 +1018,6 @@ static inline void *nand_get_manufacturer_data(struct nand_chip *chip)
 #define NAND_MFR_ATO		0x9b
 #define NAND_MFR_WINBOND	0xef
 
-/* The maximum expected count of bytes in the NAND ID sequence */
-#define NAND_MAX_ID_LEN 8
 
 /*
  * A helper for defining older NAND chips where the second ID byte fully
@@ -1246,6 +1234,8 @@ int onfi_init_data_interface(struct nand_chip *chip,
  */
 static inline bool nand_is_slc(struct nand_chip *chip)
 {
+	WARN(chip->bits_per_cell == 0,
+	     "chip->bits_per_cell is used uninitialized\n");
 	return chip->bits_per_cell == 1;
 }
 
@@ -1328,4 +1318,4 @@ void nand_cleanup(struct nand_chip *chip);
 
 /* Default extended ID decoding function */
 void nand_decode_ext_id(struct nand_chip *chip);
-#endif /* __LINUX_MTD_NAND_H */
+#endif /* __LINUX_MTD_RAWNAND_H */
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index 2251add65fa7..c759d403cbc0 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -22,7 +22,7 @@
 
 #include <linux/completion.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pm_qos.h>
 
diff --git a/include/linux/mtd/sharpsl.h b/include/linux/mtd/sharpsl.h
index 65e91d0fa981..e1845fc4afbd 100644
--- a/include/linux/mtd/sharpsl.h
+++ b/include/linux/mtd/sharpsl.h
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
@@ -17,4 +17,5 @@ struct sharpsl_nand_platform_data {
 	const struct mtd_ooblayout_ops *ecc_layout;
 	struct mtd_partition	*partitions;
 	unsigned int		nr_partitions;
+	const char *const	*part_parsers;
 };
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 55faa2f07cca..1f0a7fc7772f 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -41,6 +41,8 @@
 #define SPINOR_OP_WREN		0x06	/* Write enable */
 #define SPINOR_OP_RDSR		0x05	/* Read status register */
 #define SPINOR_OP_WRSR		0x01	/* Write status register 1 byte */
+#define SPINOR_OP_RDSR2		0x3f	/* Read status register 2 */
+#define SPINOR_OP_WRSR2		0x3e	/* Write status register 2 */
 #define SPINOR_OP_READ		0x03	/* Read data bytes (low frequency) */
 #define SPINOR_OP_READ_FAST	0x0b	/* Read data bytes (high frequency) */
 #define SPINOR_OP_READ_1_1_2	0x3b	/* Read data bytes (Dual Output SPI) */
@@ -56,6 +58,7 @@
 #define SPINOR_OP_CHIP_ERASE	0xc7	/* Erase whole flash chip */
 #define SPINOR_OP_SE		0xd8	/* Sector erase (usually 64KiB) */
 #define SPINOR_OP_RDID		0x9f	/* Read JEDEC ID */
+#define SPINOR_OP_RDSFDP	0x5a	/* Read SFDP */
 #define SPINOR_OP_RDCR		0x35	/* Read configuration register */
 #define SPINOR_OP_RDFSR		0x70	/* Read flag status register */
 
@@ -102,6 +105,7 @@
 
 /* Used for Spansion flashes only. */
 #define SPINOR_OP_BRWR		0x17	/* Bank register write */
+#define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
 
 /* Used for Micron flashes only. */
 #define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
@@ -116,6 +120,9 @@
 #define SR_BP2			BIT(4)	/* Block protect 2 */
 #define SR_TB			BIT(5)	/* Top/Bottom protect */
 #define SR_SRWD			BIT(7)	/* SR write protect */
+/* Spansion/Cypress specific status bits */
+#define SR_E_ERR		BIT(5)
+#define SR_P_ERR		BIT(6)
 
 #define SR_QUAD_EN_MX		BIT(6)	/* Macronix Quad I/O */
 
@@ -128,6 +135,9 @@
 /* Configuration Register bits. */
 #define CR_QUAD_EN_SPAN		BIT(1)	/* Spansion Quad I/O */
 
+/* Status Register 2 bits. */
+#define SR2_QUAD_EN_BIT7	BIT(7)
+
 /* Supported SPI protocols */
 #define SNOR_PROTO_INST_MASK	GENMASK(23, 16)
 #define SNOR_PROTO_INST_SHIFT	16
@@ -218,6 +228,7 @@ enum spi_nor_option_flags {
 	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
 	SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
 	SNOR_F_READY_XSR_RDY	= BIT(4),
+	SNOR_F_USE_CLSR		= BIT(5),
 };
 
 /**
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
index abed4dec5c2f..e373690cce0a 100644
--- a/include/linux/mtd/xip.h
+++ b/include/linux/mtd/xip.h
@@ -30,7 +30,9 @@
  * obviously not be running from flash.  The __xipram is therefore marking
  * those functions so they get relocated to ram.
  */
-#define __xipram noinline __attribute__ ((__section__ (".data")))
+#ifdef CONFIG_XIP_KERNEL
+#define __xipram noinline __attribute__ ((__section__ (".xiptext")))
+#endif
 
 /*
  * Each architecture has to provide the following macros.  They must access
@@ -90,10 +92,10 @@
 #define xip_cpu_idle()  do { } while (0)
 #endif
 
-#else
+#endif /* CONFIG_MTD_XIP */
 
+#ifndef __xipram
 #define __xipram
-
-#endif /* CONFIG_MTD_XIP */
+#endif
 
 #endif /* __LINUX_MTD_XIP_H__ */
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
index 1cf555aef896..f1a2cf655bdb 100644
--- a/include/linux/platform_data/mtd-davinci.h
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -28,7 +28,7 @@
 #ifndef __ARCH_ARM_DAVINCI_NAND_H
 #define __ARCH_ARM_DAVINCI_NAND_H
 
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 
 #define NANDFCR_OFFSET		0x60
 #define NANDFSR_OFFSET		0x64
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index f01659026b26..f8c553f92655 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -12,7 +12,7 @@
 #ifndef __MTD_NAND_S3C2410_H
 #define __MTD_NAND_S3C2410_H
 
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
 
 /**
  * struct s3c2410_nand_set - define a set of one or more nand chips