ipack: move header files to include/linux

Move ipack header files to include/linux/ directory where they belong.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 213 insertions, 0 deletions

diff --git a/include/linux/ipack.h b/include/linux/ipack.h
new file mode 100644
index 000000000000..7a0a3085ab5b
--- /dev/null
+++ b/include/linux/ipack.h
@@ -0,0 +1,213 @@
+/*
+ * Industry-pack bus.
+ *
+ * Copyright (C) 2011-2012 CERN (www.cern.ch)
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#define IPACK_IDPROM_OFFSET_I			0x01
+#define IPACK_IDPROM_OFFSET_P			0x03
+#define IPACK_IDPROM_OFFSET_A			0x05
+#define IPACK_IDPROM_OFFSET_C			0x07
+#define IPACK_IDPROM_OFFSET_MANUFACTURER_ID	0x09
+#define IPACK_IDPROM_OFFSET_MODEL		0x0B
+#define IPACK_IDPROM_OFFSET_REVISION		0x0D
+#define IPACK_IDPROM_OFFSET_RESERVED		0x0F
+#define IPACK_IDPROM_OFFSET_DRIVER_ID_L		0x11
+#define IPACK_IDPROM_OFFSET_DRIVER_ID_H		0x13
+#define IPACK_IDPROM_OFFSET_NUM_BYTES		0x15
+#define IPACK_IDPROM_OFFSET_CRC			0x17
+
+struct ipack_bus_ops;
+struct ipack_driver;
+
+enum ipack_space {
+	IPACK_IO_SPACE    = 0,
+	IPACK_ID_SPACE,
+	IPACK_INT_SPACE,
+	IPACK_MEM8_SPACE,
+	IPACK_MEM16_SPACE,
+	/* Dummy for counting the number of entries.  Must remain the last
+	 * entry */
+	IPACK_SPACE_COUNT,
+};
+
+/**
+ */
+struct ipack_region {
+	phys_addr_t start;
+	size_t      size;
+};
+
+/**
+ *	struct ipack_device
+ *
+ *	@slot: Slot where the device is plugged in the carrier board
+ *	@bus: ipack_bus_device where the device is plugged to.
+ *	@id_space: Virtual address to ID space.
+ *	@io_space: Virtual address to IO space.
+ *	@mem_space: Virtual address to MEM space.
+ *	@dev: device in kernel representation.
+ *
+ * Warning: Direct access to mapped memory is possible but the endianness
+ * is not the same with PCI carrier or VME carrier. The endianness is managed
+ * by the carrier board throught bus->ops.
+ */
+struct ipack_device {
+	unsigned int slot;
+	struct ipack_bus_device *bus;
+	struct device dev;
+	void (*release) (struct ipack_device *dev);
+	struct ipack_region      region[IPACK_SPACE_COUNT];
+	u8                      *id;
+	size_t			 id_avail;
+	u32			 id_vendor;
+	u32			 id_device;
+	u8			 id_format;
+	unsigned int		 id_crc_correct:1;
+	unsigned int		 speed_8mhz:1;
+	unsigned int		 speed_32mhz:1;
+};
+
+/**
+ * struct ipack_driver_ops -- Callbacks to IPack device driver
+ *
+ * @probe:  Probe function
+ * @remove: Prepare imminent removal of the device.  Services provided by the
+ *          device should be revoked.
+ */
+
+struct ipack_driver_ops {
+	int (*probe) (struct ipack_device *dev);
+	void (*remove) (struct ipack_device *dev);
+};
+
+/**
+ * struct ipack_driver -- Specific data to each ipack device driver
+ *
+ * @driver: Device driver kernel representation
+ * @ops:    Callbacks provided by the IPack device driver
+ */
+struct ipack_driver {
+	struct device_driver driver;
+	const struct ipack_device_id *id_table;
+	const struct ipack_driver_ops *ops;
+};
+
+/**
+ *	struct ipack_bus_ops - available operations on a bridge module
+ *
+ *	@map_space: map IP address space
+ *	@unmap_space: unmap IP address space
+ *	@request_irq: request IRQ
+ *	@free_irq: free IRQ
+ *	@get_clockrate: Returns the clockrate the carrier is currently
+ *		communicating with the device at.
+ *	@set_clockrate: Sets the clock-rate for carrier / module communication.
+ *		Should return -EINVAL if the requested speed is not supported.
+ *	@get_error: Returns the error state for the slot the device is attached
+ *		to.
+ *	@get_timeout: Returns 1 if the communication with the device has
+ *		previously timed out.
+ *	@reset_timeout: Resets the state returned by get_timeout.
+ */
+struct ipack_bus_ops {
+	int (*request_irq) (struct ipack_device *dev,
+			    irqreturn_t (*handler)(void *), void *arg);
+	int (*free_irq) (struct ipack_device *dev);
+	int (*get_clockrate) (struct ipack_device *dev);
+	int (*set_clockrate) (struct ipack_device *dev, int mherz);
+	int (*get_error) (struct ipack_device *dev);
+	int (*get_timeout) (struct ipack_device *dev);
+	int (*reset_timeout) (struct ipack_device *dev);
+};
+
+/**
+ *	struct ipack_bus_device
+ *
+ *	@dev: pointer to carrier device
+ *	@slots: number of slots available
+ *	@bus_nr: ipack bus number
+ *	@ops: bus operations for the mezzanine drivers
+ */
+struct ipack_bus_device {
+	struct device *parent;
+	int slots;
+	int bus_nr;
+	const struct ipack_bus_ops *ops;
+};
+
+/**
+ *	ipack_bus_register -- register a new ipack bus
+ *
+ * @parent: pointer to the parent device, if any.
+ * @slots: number of slots available in the bus device.
+ * @ops: bus operations for the mezzanine drivers.
+ *
+ * The carrier board device should call this function to register itself as
+ * available bus device in ipack.
+ */
+struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots,
+					    const struct ipack_bus_ops *ops);
+
+/**
+ *	ipack_bus_unregister -- unregister an ipack bus
+ */
+int ipack_bus_unregister(struct ipack_bus_device *bus);
+
+/**
+ * ipack_driver_register -- Register a new ipack device driver
+ *
+ * Called by a ipack driver to register itself as a driver
+ * that can manage ipack devices.
+ */
+int ipack_driver_register(struct ipack_driver *edrv, struct module *owner,
+			  const char *name);
+void ipack_driver_unregister(struct ipack_driver *edrv);
+
+/**
+ *	ipack_device_register -- register an IPack device with the kernel
+ *	@dev: the new device to register.
+ *
+ *	Register a new IPack device ("module" in IndustryPack jargon). The call
+ *	is done by the carrier driver.  The carrier should populate the fields
+ *	bus and slot as well as the region array of @dev prior to calling this
+ *	function.  The rest of the fields will be allocated and populated
+ *	during registration.
+ *
+ *	Return zero on success or error code on failure.
+ */
+int ipack_device_register(struct ipack_device *dev);
+void ipack_device_unregister(struct ipack_device *dev);
+
+/**
+ * DEFINE_IPACK_DEVICE_TABLE - macro used to describe a IndustryPack table
+ * @_table: device table name
+ *
+ * This macro is used to create a struct ipack_device_id array (a device table)
+ * in a generic manner.
+ */
+#define DEFINE_IPACK_DEVICE_TABLE(_table) \
+	const struct ipack_device_id _table[] __devinitconst
+
+/**
+ * IPACK_DEVICE - macro used to describe a specific IndustryPack device
+ * @_format: the format version (currently either 1 or 2, 8 bit value)
+ * @vend:    the 8 or 24 bit IndustryPack Vendor ID
+ * @dev:     the 8 or 16  bit IndustryPack Device ID
+ *
+ * This macro is used to create a struct ipack_device_id that matches a specific
+ * device.
+ */
+#define IPACK_DEVICE(_format, vend, dev) \
+	 .format = (_format), \
+	 .vendor = (vend), \
+	 .device = (dev)