Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "This is the main block pull request this series. Contrary to previous
  release, I've kept the core and driver changes in the same branch. We
  always ended up having dependencies between the two for obvious
  reasons, so makes more sense to keep them together. That said, I'll
  probably try and keep more topical branches going forward, especially
  for cycles that end up being as busy as this one.

  The major parts of this pull request is:

   - Improved support for O_DIRECT on block devices, with a small
     private implementation instead of using the pig that is
     fs/direct-io.c. From Christoph.

   - Request completion tracking in a scalable fashion. This is utilized
     by two components in this pull, the new hybrid polling and the
     writeback queue throttling code.

   - Improved support for polling with O_DIRECT, adding a hybrid mode
     that combines pure polling with an initial sleep. From me.

   - Support for automatic throttling of writeback queues on the block
     side. This uses feedback from the device completion latencies to
     scale the queue on the block side up or down. From me.

   - Support from SMR drives in the block layer and for SD. From Hannes
     and Shaun.

   - Multi-connection support for nbd. From Josef.

   - Cleanup of request and bio flags, so we have a clear split between
     which are bio (or rq) private, and which ones are shared. From
     Christoph.

   - A set of patches from Bart, that improve how we handle queue
     stopping and starting in blk-mq.

   - Support for WRITE_ZEROES from Chaitanya.

   - Lightnvm updates from Javier/Matias.

   - Supoort for FC for the nvme-over-fabrics code. From James Smart.

   - A bunch of fixes from a whole slew of people, too many to name
     here"

* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
  blk-stat: fix a few cases of missing batch flushing
  blk-flush: run the queue when inserting blk-mq flush
  elevator: make the rqhash helpers exported
  blk-mq: abstract out blk_mq_dispatch_rq_list() helper
  blk-mq: add blk_mq_start_stopped_hw_queue()
  block: improve handling of the magic discard payload
  blk-wbt: don't throttle discard or write zeroes
  nbd: use dev_err_ratelimited in io path
  nbd: reset the setup task for NBD_CLEAR_SOCK
  nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
  nvme-fabrics: Add target support for FC transport
  nvme-fabrics: Add host support for FC transport
  nvme-fabrics: Add FC transport LLDD api definitions
  nvme-fabrics: Add FC transport FC-NVME definitions
  nvme-fabrics: Add FC transport error codes to nvme.h
  Add type 0x28 NVME type code to scsi fc headers
  nvme-fabrics: patch target code in prep for FC transport support
  nvme-fabrics: set sqe.command_id in core not transports
  parser: add u64 number parser
  nvme-rdma: align to generic ib_event logging helper
  ...

5 files changed, 155 insertions, 4 deletions

diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 9838a5c7b3e7..bc2ef9fef7c8 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -70,6 +70,7 @@ header-y += bfs_fs.h
 header-y += binfmts.h
 header-y += blkpg.h
 header-y += blktrace_api.h
+header-y += blkzoned.h
 header-y += bpf_common.h
 header-y += bpf_perf_event.h
 header-y += bpf.h
diff --git a/include/uapi/linux/blkzoned.h b/include/uapi/linux/blkzoned.h
new file mode 100644
index 000000000000..40d1d7bff537
--- /dev/null
+++ b/include/uapi/linux/blkzoned.h
@@ -0,0 +1,143 @@
+/*
+ * Zoned block devices handling.
+ *
+ * Copyright (C) 2015 Seagate Technology PLC
+ *
+ * Written by: Shaun Tancheff <shaun.tancheff@seagate.com>
+ *
+ * Modified by: Damien Le Moal <damien.lemoal@hgst.com>
+ * Copyright (C) 2016 Western Digital
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef _UAPI_BLKZONED_H
+#define _UAPI_BLKZONED_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/**
+ * enum blk_zone_type - Types of zones allowed in a zoned device.
+ *
+ * @BLK_ZONE_TYPE_CONVENTIONAL: The zone has no write pointer and can be writen
+ *                              randomly. Zone reset has no effect on the zone.
+ * @BLK_ZONE_TYPE_SEQWRITE_REQ: The zone must be written sequentially
+ * @BLK_ZONE_TYPE_SEQWRITE_PREF: The zone can be written non-sequentially
+ *
+ * Any other value not defined is reserved and must be considered as invalid.
+ */
+enum blk_zone_type {
+	BLK_ZONE_TYPE_CONVENTIONAL	= 0x1,
+	BLK_ZONE_TYPE_SEQWRITE_REQ	= 0x2,
+	BLK_ZONE_TYPE_SEQWRITE_PREF	= 0x3,
+};
+
+/**
+ * enum blk_zone_cond - Condition [state] of a zone in a zoned device.
+ *
+ * @BLK_ZONE_COND_NOT_WP: The zone has no write pointer, it is conventional.
+ * @BLK_ZONE_COND_EMPTY: The zone is empty.
+ * @BLK_ZONE_COND_IMP_OPEN: The zone is open, but not explicitly opened.
+ * @BLK_ZONE_COND_EXP_OPEN: The zones was explicitly opened by an
+ *                          OPEN ZONE command.
+ * @BLK_ZONE_COND_CLOSED: The zone was [explicitly] closed after writing.
+ * @BLK_ZONE_COND_FULL: The zone is marked as full, possibly by a zone
+ *                      FINISH ZONE command.
+ * @BLK_ZONE_COND_READONLY: The zone is read-only.
+ * @BLK_ZONE_COND_OFFLINE: The zone is offline (sectors cannot be read/written).
+ *
+ * The Zone Condition state machine in the ZBC/ZAC standards maps the above
+ * deinitions as:
+ *   - ZC1: Empty         | BLK_ZONE_EMPTY
+ *   - ZC2: Implicit Open | BLK_ZONE_COND_IMP_OPEN
+ *   - ZC3: Explicit Open | BLK_ZONE_COND_EXP_OPEN
+ *   - ZC4: Closed        | BLK_ZONE_CLOSED
+ *   - ZC5: Full          | BLK_ZONE_FULL
+ *   - ZC6: Read Only     | BLK_ZONE_READONLY
+ *   - ZC7: Offline       | BLK_ZONE_OFFLINE
+ *
+ * Conditions 0x5 to 0xC are reserved by the current ZBC/ZAC spec and should
+ * be considered invalid.
+ */
+enum blk_zone_cond {
+	BLK_ZONE_COND_NOT_WP	= 0x0,
+	BLK_ZONE_COND_EMPTY	= 0x1,
+	BLK_ZONE_COND_IMP_OPEN	= 0x2,
+	BLK_ZONE_COND_EXP_OPEN	= 0x3,
+	BLK_ZONE_COND_CLOSED	= 0x4,
+	BLK_ZONE_COND_READONLY	= 0xD,
+	BLK_ZONE_COND_FULL	= 0xE,
+	BLK_ZONE_COND_OFFLINE	= 0xF,
+};
+
+/**
+ * struct blk_zone - Zone descriptor for BLKREPORTZONE ioctl.
+ *
+ * @start: Zone start in 512 B sector units
+ * @len: Zone length in 512 B sector units
+ * @wp: Zone write pointer location in 512 B sector units
+ * @type: see enum blk_zone_type for possible values
+ * @cond: see enum blk_zone_cond for possible values
+ * @non_seq: Flag indicating that the zone is using non-sequential resources
+ *           (for host-aware zoned block devices only).
+ * @reset: Flag indicating that a zone reset is recommended.
+ * @reserved: Padding to 64 B to match the ZBC/ZAC defined zone descriptor size.
+ *
+ * start, len and wp use the regular 512 B sector unit, regardless of the
+ * device logical block size. The overall structure size is 64 B to match the
+ * ZBC/ZAC defined zone descriptor and allow support for future additional
+ * zone information.
+ */
+struct blk_zone {
+	__u64	start;		/* Zone start sector */
+	__u64	len;		/* Zone length in number of sectors */
+	__u64	wp;		/* Zone write pointer position */
+	__u8	type;		/* Zone type */
+	__u8	cond;		/* Zone condition */
+	__u8	non_seq;	/* Non-sequential write resources active */
+	__u8	reset;		/* Reset write pointer recommended */
+	__u8	reserved[36];
+};
+
+/**
+ * struct blk_zone_report - BLKREPORTZONE ioctl request/reply
+ *
+ * @sector: starting sector of report
+ * @nr_zones: IN maximum / OUT actual
+ * @reserved: padding to 16 byte alignment
+ * @zones: Space to hold @nr_zones @zones entries on reply.
+ *
+ * The array of at most @nr_zones must follow this structure in memory.
+ */
+struct blk_zone_report {
+	__u64		sector;
+	__u32		nr_zones;
+	__u8		reserved[4];
+	struct blk_zone zones[0];
+} __packed;
+
+/**
+ * struct blk_zone_range - BLKRESETZONE ioctl request
+ * @sector: starting sector of the first zone to issue reset write pointer
+ * @nr_sectors: Total number of sectors of 1 or more zones to reset
+ */
+struct blk_zone_range {
+	__u64		sector;
+	__u64		nr_sectors;
+};
+
+/**
+ * Zoned block device ioctl's:
+ *
+ * @BLKREPORTZONE: Get zone information. Takes a zone report as argument.
+ *                 The zone report will start from the zone containing the
+ *                 sector specified in the report request structure.
+ * @BLKRESETZONE: Reset the write pointer of the zones in the specified
+ *                sector range. The sector range must be zone aligned.
+ */
+#define BLKREPORTZONE	_IOWR(0x12, 130, struct blk_zone_report)
+#define BLKRESETZONE	_IOW(0x12, 131, struct blk_zone_range)
+
+#endif /* _UAPI_BLKZONED_H */
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index acb2b6152ba0..c1d11df07b28 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -225,6 +225,10 @@ struct fsxattr {
 #define BLKSECDISCARD _IO(0x12,125)
 #define BLKROTATIONAL _IO(0x12,126)
 #define BLKZEROOUT _IO(0x12,127)
+/*
+ * A jump here: 130-131 are reserved for zoned block devices
+ * (see uapi/linux/blkzoned.h)
+ */
 
 #define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
 #define FIBMAP	   _IO(0x00,1)	/* bmap access */
diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h
index e08e413d5f71..c91c642ea900 100644
--- a/include/uapi/linux/nbd.h
+++ b/include/uapi/linux/nbd.h
@@ -38,11 +38,12 @@ enum {
 };
 
 /* values for flags field */
-#define NBD_FLAG_HAS_FLAGS    (1 << 0) /* nbd-server supports flags */
-#define NBD_FLAG_READ_ONLY    (1 << 1) /* device is read-only */
-#define NBD_FLAG_SEND_FLUSH   (1 << 2) /* can flush writeback cache */
+#define NBD_FLAG_HAS_FLAGS	(1 << 0) /* nbd-server supports flags */
+#define NBD_FLAG_READ_ONLY	(1 << 1) /* device is read-only */
+#define NBD_FLAG_SEND_FLUSH	(1 << 2) /* can flush writeback cache */
 /* there is a gap here to match userspace */
-#define NBD_FLAG_SEND_TRIM    (1 << 5) /* send trim/discard */
+#define NBD_FLAG_SEND_TRIM	(1 << 5) /* send trim/discard */
+#define NBD_FLAG_CAN_MULTI_CONN	(1 << 8)	/* Server supports multiple connections per export. */
 
 /* userspace doesn't need the nbd_device structure */
 
diff --git a/include/uapi/scsi/fc/fc_fs.h b/include/uapi/scsi/fc/fc_fs.h
index 50f28b143451..dcf314dc2a27 100644
--- a/include/uapi/scsi/fc/fc_fs.h
+++ b/include/uapi/scsi/fc/fc_fs.h
@@ -190,6 +190,7 @@ enum fc_fh_type {
 	FC_TYPE_FCP =	0x08,	/* SCSI FCP */
 	FC_TYPE_CT =	0x20,	/* Fibre Channel Services (FC-CT) */
 	FC_TYPE_ILS =	0x22,	/* internal link service */
+	FC_TYPE_NVME =	0x28,	/* FC-NVME */
 };
 
 /*
@@ -203,6 +204,7 @@ enum fc_fh_type {
 	[FC_TYPE_FCP] =		"FCP",			\
 	[FC_TYPE_CT] =		"CT",			\
 	[FC_TYPE_ILS] =		"ILS",			\
+	[FC_TYPE_NVME] =	"NVME",			\
 }
 
 /*