misc: xilinx_sdfec: Add stats & status ioctls

SD-FEC statistic data are:
- count of data interface errors (isr_err_count)
- count of Correctable ECC errors (cecc_count)
- count of Uncorrectable ECC errors (uecc_count)

Add support:
1. clear stats ioctl callback which clears collected
statistic data,
2. get stats ioctl callback which reads a collected
statistic data,
3. set default configuration ioctl callback,
4. start ioctl callback enables SD-FEC HW,
5. stop ioctl callback disables SD-FEC HW.

In a failed state driver enables the following ioctls:
- get status
- get statistics
- clear stats
- set default SD-FEC device configuration

Tested-by: Santhosh Dyavanapally <SDYAVANA@xilinx.com>
Tested by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Tested-by: Derek Kiernan <derek.kiernan@xilinx.com>
Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com>
Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Link: https://lore.kernel.org/r/1564216438-322406-7-git-send-email-dragan.cvetic@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 75 insertions, 0 deletions

diff --git a/include/uapi/misc/xilinx_sdfec.h b/include/uapi/misc/xilinx_sdfec.h
index 85ee288dbb33..ee1a42ae6f46 100644
--- a/include/uapi/misc/xilinx_sdfec.h
+++ b/include/uapi/misc/xilinx_sdfec.h
@@ -234,6 +234,21 @@ struct xsdfec_config {
 };
 
 /**
+ * struct xsdfec_stats - Stats retrived by ioctl XSDFEC_GET_STATS. Used
+ *			 to buffer atomic_t variables from struct
+ *			 xsdfec_dev. Counts are accumulated until
+ *			 the user clears them.
+ * @isr_err_count: Count of ISR errors
+ * @cecc_count: Count of Correctable ECC errors (SBE)
+ * @uecc_count: Count of Uncorrectable ECC errors (MBE)
+ */
+struct xsdfec_stats {
+	__u32 isr_err_count;
+	__u32 cecc_count;
+	__u32 uecc_count;
+};
+
+/**
  * struct xsdfec_ldpc_param_table_sizes - Used to store sizes of SD-FEC table
  *					  entries for an individual LPDC code
  *					  parameter.
@@ -252,6 +267,32 @@ struct xsdfec_ldpc_param_table_sizes {
  */
 #define XSDFEC_MAGIC 'f'
 /**
+ * DOC: XSDFEC_START_DEV
+ *
+ * @Description
+ *
+ * ioctl to start SD-FEC core
+ *
+ * This fails if the XSDFEC_SET_ORDER ioctl has not been previously called
+ */
+#define XSDFEC_START_DEV _IO(XSDFEC_MAGIC, 0)
+/**
+ * DOC: XSDFEC_STOP_DEV
+ *
+ * @Description
+ *
+ * ioctl to stop the SD-FEC core
+ */
+#define XSDFEC_STOP_DEV _IO(XSDFEC_MAGIC, 1)
+/**
+ * DOC: XSDFEC_GET_STATUS
+ *
+ * @Description
+ *
+ * ioctl that returns status of SD-FEC core
+ */
+#define XSDFEC_GET_STATUS _IOR(XSDFEC_MAGIC, 2, struct xsdfec_status)
+/**
  * DOC: XSDFEC_SET_IRQ
  * @Parameters
  *
@@ -370,4 +411,38 @@ struct xsdfec_ldpc_param_table_sizes {
  * ioctl that determines if SD-FEC is processing data
  */
 #define XSDFEC_IS_ACTIVE _IOR(XSDFEC_MAGIC, 10, bool)
+/**
+ * DOC: XSDFEC_CLEAR_STATS
+ *
+ * @Description
+ *
+ * ioctl that clears error stats collected during interrupts
+ */
+#define XSDFEC_CLEAR_STATS _IO(XSDFEC_MAGIC, 11)
+/**
+ * DOC: XSDFEC_GET_STATS
+ * @Parameters
+ *
+ * @struct xsdfec_stats *
+ *	Pointer to the &struct xsdfec_stats that will contain the updated stats
+ *	values
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC core stats
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_GET_STATS _IOR(XSDFEC_MAGIC, 12, struct xsdfec_stats)
+/**
+ * DOC: XSDFEC_SET_DEFAULT_CONFIG
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC core to default config, use after a reset
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_SET_DEFAULT_CONFIG _IO(XSDFEC_MAGIC, 13)
+
 #endif /* __XILINX_SDFEC_H__ */