Merge tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "There are three noteworthy updates for 32-bit arm platforms this time:

   - The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
     new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
     based) SoCs.

   - The ixp4xx platform (based on Intel XScale) is finally converted to
     device tree, and all the old board files are getting removed now.

   - The Cirrus Logic EP93xx platform loses support for the old
     MaverickCrunch FPU. Support for compiling user space applications
     was already removed in gcc-4.9, and the kernel support for old
     applications could not be built with clang ias. After confirming
     that there are no remaining users, removing this from the kernel
     seemed better than adding support for unused features to clang.

  There are minor updates to the aspeed, omap and samsung platforms"

* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
  ARM: s3c: delete unneed local variable "delay"
  soc: aspeed: Re-enable FWH2AHB on AST2600
  soc: aspeed: socinfo: Add AST2625 variant
  soc: aspeed: p2a-ctrl: Fix boundary check for mmap
  soc: aspeed: lpc-ctrl: Fix boundary check for mmap
  ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
  ARM: ixp4xx: Delete GTWX5715 board files
  ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
  ARM: ixp4xx: Delete Intel reference design boardfiles
  ARM: ixp4xx: Delete Avila boardfiles
  ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
  ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
  ARM: ixp4xx: Delete Omicron boardfiles
  ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
  ARM: ixp4xx: Delete NAS100D boardfiles
  ARM: ixp4xx: Delete NSLU2 boardfiles
  arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
  arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
  ARM: ep93xx: remove MaverickCrunch support
  ...

2 files changed, 114 insertions, 0 deletions

diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h
new file mode 100644
index 000000000000..f6542584ca13
--- /dev/null
+++ b/include/soc/at91/sama7-ddr.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Microchip SAMA7 UDDR Controller and DDR3 PHY Controller registers offsets
+ * and bit definitions.
+ *
+ * Copyright (C) [2020] Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudu Beznea <claudiu.beznea@microchip.com>
+ */
+
+#ifndef __SAMA7_DDR_H__
+#define __SAMA7_DDR_H__
+
+#ifdef CONFIG_SOC_SAMA7
+
+/* DDR3PHY */
+#define DDR3PHY_PIR				(0x04)		/* DDR3PHY PHY Initialization Register	*/
+#define	DDR3PHY_PIR_DLLBYP		(1 << 17)	/* DLL Bypass */
+#define		DDR3PHY_PIR_ITMSRST		(1 << 4)	/* Interface Timing Module Soft Reset */
+#define	DDR3PHY_PIR_DLLLOCK		(1 << 2)	/* DLL Lock */
+#define		DDR3PHY_PIR_DLLSRST		(1 << 1)	/* DLL Soft Rest */
+#define	DDR3PHY_PIR_INIT		(1 << 0)	/* Initialization Trigger */
+
+#define DDR3PHY_PGCR				(0x08)		/* DDR3PHY PHY General Configuration Register */
+#define		DDR3PHY_PGCR_CKDV1		(1 << 13)	/* CK# Disable Value */
+#define		DDR3PHY_PGCR_CKDV0		(1 << 12)	/* CK Disable Value */
+
+#define	DDR3PHY_PGSR				(0x0C)		/* DDR3PHY PHY General Status Register */
+#define		DDR3PHY_PGSR_IDONE		(1 << 0)	/* Initialization Done */
+
+#define DDR3PHY_ACIOCR				(0x24)		/*  DDR3PHY AC I/O Configuration Register */
+#define		DDR3PHY_ACIOCR_CSPDD_CS0	(1 << 18)	/* CS#[0] Power Down Driver */
+#define		DDR3PHY_ACIOCR_CKPDD_CK0	(1 << 8)	/* CK[0] Power Down Driver */
+#define		DDR3PHY_ACIORC_ACPDD		(1 << 3)	/* AC Power Down Driver */
+
+#define DDR3PHY_DXCCR				(0x28)		/* DDR3PHY DATX8 Common Configuration Register */
+#define		DDR3PHY_DXCCR_DXPDR		(1 << 3)	/* Data Power Down Receiver */
+
+#define DDR3PHY_DSGCR				(0x2C)		/* DDR3PHY DDR System General Configuration Register */
+#define		DDR3PHY_DSGCR_ODTPDD_ODT0	(1 << 20)	/* ODT[0] Power Down Driver */
+
+#define DDR3PHY_ZQ0SR0				(0x188)		/* ZQ status register 0 */
+
+/* UDDRC */
+#define UDDRC_STAT				(0x04)		/* UDDRC Operating Mode Status Register */
+#define		UDDRC_STAT_SELFREF_TYPE_DIS	(0x0 << 4)	/* SDRAM is not in Self-refresh */
+#define		UDDRC_STAT_SELFREF_TYPE_PHY	(0x1 << 4)	/* SDRAM is in Self-refresh, which was caused by PHY Master Request */
+#define		UDDRC_STAT_SELFREF_TYPE_SW	(0x2 << 4)	/* SDRAM is in Self-refresh, which was not caused solely under Automatic Self-refresh control */
+#define		UDDRC_STAT_SELFREF_TYPE_AUTO	(0x3 << 4)	/* SDRAM is in Self-refresh, which was caused by Automatic Self-refresh only */
+#define		UDDRC_STAT_SELFREF_TYPE_MSK	(0x3 << 4)	/* Self-refresh type mask */
+#define		UDDRC_STAT_OPMODE_INIT		(0x0 << 0)	/* Init */
+#define		UDDRC_STAT_OPMODE_NORMAL	(0x1 << 0)	/* Normal */
+#define		UDDRC_STAT_OPMODE_PWRDOWN	(0x2 << 0)	/* Power-down */
+#define		UDDRC_STAT_OPMODE_SELF_REFRESH	(0x3 << 0)	/* Self-refresh */
+#define		UDDRC_STAT_OPMODE_MSK		(0x7 << 0)	/* Operating mode mask */
+
+#define UDDRC_PWRCTL				(0x30)		/* UDDRC Low Power Control Register */
+#define		UDDRC_PWRCTRL_SELFREF_SW	(1 << 5)	/* Software self-refresh */
+
+#define UDDRC_DFIMISC				(0x1B0)		/* UDDRC DFI Miscellaneous Control Register */
+#define		UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN (1 << 0)	/* PHY initialization complete enable signal */
+
+#define UDDRC_SWCTRL				(0x320)		/* UDDRC Software Register Programming Control Enable */
+#define		UDDRC_SWCTRL_SW_DONE		(1 << 0)	/* Enable quasi-dynamic register programming outside reset */
+
+#define UDDRC_SWSTAT				(0x324)		/* UDDRC Software Register Programming Control Status */
+#define		UDDRC_SWSTAT_SW_DONE_ACK	(1 << 0)	/* Register programming done */
+
+#define UDDRC_PSTAT				(0x3FC)		/* UDDRC Port Status Register */
+#define	UDDRC_PSTAT_ALL_PORTS		(0x1F001F)	/* Read + writes outstanding transactions on all ports */
+
+#define UDDRC_PCTRL_0				(0x490)		/* UDDRC Port 0 Control Register */
+#define UDDRC_PCTRL_1				(0x540)		/* UDDRC Port 1 Control Register */
+#define UDDRC_PCTRL_2				(0x5F0)		/* UDDRC Port 2 Control Register */
+#define UDDRC_PCTRL_3				(0x6A0)		/* UDDRC Port 3 Control Register */
+#define UDDRC_PCTRL_4				(0x750)		/* UDDRC Port 4 Control Register */
+
+#endif /* CONFIG_SOC_SAMA7 */
+
+#endif /* __SAMA7_DDR_H__ */
diff --git a/include/soc/at91/sama7-sfrbu.h b/include/soc/at91/sama7-sfrbu.h
new file mode 100644
index 000000000000..76b740810d34
--- /dev/null
+++ b/include/soc/at91/sama7-sfrbu.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Microchip SAMA7 SFRBU registers offsets and bit definitions.
+ *
+ * Copyright (C) [2020] Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudu Beznea <claudiu.beznea@microchip.com>
+ */
+
+#ifndef __SAMA7_SFRBU_H__
+#define __SAMA7_SFRBU_H__
+
+#ifdef CONFIG_SOC_SAMA7
+
+#define AT91_SFRBU_PSWBU			(0x00)		/* SFRBU Power Switch BU Control Register */
+#define		AT91_SFRBU_PSWBU_PSWKEY		(0x4BD20C << 8)	/* Specific value mandatory to allow writing of other register bits */
+#define		AT91_SFRBU_PSWBU_STATE		(1 << 2)	/* Power switch BU state */
+#define		AT91_SFRBU_PSWBU_SOFTSWITCH	(1 << 1)	/* Power switch BU source selection */
+#define		AT91_SFRBU_PSWBU_CTRL		(1 << 0)	/* Power switch BU control */
+
+#define AT91_SFRBU_25LDOCR			(0x0C)		/* SFRBU 2.5V LDO Control Register */
+#define		AT91_SFRBU_25LDOCR_LDOANAKEY	(0x3B6E18 << 8)	/* Specific value mandatory to allow writing of other register bits. */
+#define		AT91_SFRBU_25LDOCR_STATE	(1 << 3)	/* LDOANA Switch On/Off Control */
+#define		AT91_SFRBU_25LDOCR_LP		(1 << 2)	/* LDOANA Low-Power Mode Control */
+#define		AT91_SFRBU_PD_VALUE_MSK		(0x3)
+#define		AT91_SFRBU_25LDOCR_PD_VALUE(v)	((v) & AT91_SFRBU_PD_VALUE_MSK)	/* LDOANA Pull-down value */
+
+#define AT91_FRBU_DDRPWR			(0x10)		/* SFRBU DDR Power Control Register */
+#define		AT91_FRBU_DDRPWR_STATE		(1 << 0)	/* DDR Power Mode State */
+
+#endif /* CONFIG_SOC_SAMA7 */
+
+#endif /* __SAMA7_SFRBU_H__ */
+