Merge tag 'mac80211-next-for-davem-2015-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Last round of updates for net-next:
 * revert a patch that caused a regression with mesh userspace (Bob)
 * fix a number of suspend/resume related races
   (from Emmanuel, Luca and myself - we'll look at backporting later)
 * add software implementations for new ciphers (Jouni)
 * add a new ACPI ID for Broadcom's rfkill (Mika)
 * allow using netns FD for wireless (Vadim)
 * some other cleanups (various)

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 39 insertions, 5 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7b44ba0a7632..64e09e1e8099 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1493,6 +1493,10 @@ struct cfg80211_match_set {
  * @rcu_head: RCU callback used to free the struct
  * @owner_nlportid: netlink portid of owner (if this should is a request
  *	owned by a particular socket)
+ * @delay: delay in seconds to use before starting the first scan
+ *	cycle.  The driver may ignore this parameter and start
+ *	immediately (or at any other time), if this feature is not
+ *	supported.
  */
 struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1506,6 +1510,7 @@ struct cfg80211_sched_scan_request {
 	struct cfg80211_match_set *match_sets;
 	int n_match_sets;
 	s32 min_rssi_thold;
+	u32 delay;
 
 	u8 mac_addr[ETH_ALEN] __aligned(2);
 	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 275ee56152ad..d52914b75331 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -376,6 +376,12 @@ enum ieee80211_rssi_event {
  * @ssid_len: Length of SSID given in @ssid.
  * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
  * @txpower: TX power in dBm
+ * @txpower_type: TX power adjustment used to control per packet Transmit
+ *	Power Control (TPC) in lower driver for the current vif. In particular
+ *	TPC is enabled if value passed in %txpower_type is
+ *	NL80211_TX_POWER_LIMITED (allow using less than specified from
+ *	userspace), whereas TPC is disabled if %txpower_type is set to
+ *	NL80211_TX_POWER_FIXED (use value configured from userspace)
  * @p2p_noa_attr: P2P NoA attribute for P2P powersave
  */
 struct ieee80211_bss_conf {
@@ -411,6 +417,7 @@ struct ieee80211_bss_conf {
 	size_t ssid_len;
 	bool hidden_ssid;
 	int txpower;
+	enum nl80211_tx_power_setting txpower_type;
 	struct ieee80211_p2p_noa_attr p2p_noa_attr;
 };
 
@@ -1287,8 +1294,8 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
  * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
  *	that the key is pairwise rather then a shared key.
  * @IEEE80211_KEY_FLAG_SW_MGMT_TX: This flag should be set by the driver for a
- *	CCMP key if it requires CCMP encryption of management frames (MFP) to
- *	be done in software.
+ *	CCMP/GCMP key if it requires CCMP/GCMP encryption of management frames
+ *	(MFP) to be done in software.
  * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
  *	if space should be prepared for the IV, but the IV
  *	itself should not be generated. Do not set together with
@@ -1303,7 +1310,7 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
  *	RX, if your crypto engine can't deal with TX you can also set the
  *	%IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
  * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
- *	driver for a CCMP key to indicate that is requires IV generation
+ *	driver for a CCMP/GCMP key to indicate that is requires IV generation
  *	only for managment frames (MFP).
  * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
  *	driver for a key to indicate that sufficient tailroom must always
@@ -1634,6 +1641,12 @@ struct ieee80211_tx_control {
  *	be created.  It is expected user-space will create vifs as
  *	desired (and thus have them named as desired).
  *
+ * @IEEE80211_HW_SW_CRYPTO_CONTROL: The driver wants to control which of the
+ *	crypto algorithms can be done in software - so don't automatically
+ *	try to fall back to it if hardware crypto fails, but do so only if
+ *	the driver returns 1. This also forces the driver to advertise its
+ *	supported cipher suites.
+ *
  * @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface
  *	queue mapping in order to use different queues (not just one per AC)
  *	for different virtual interfaces. See the doc section on HW queue
@@ -1681,6 +1694,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
 	IEEE80211_HW_WANT_MONITOR_VIF			= 1<<14,
 	IEEE80211_HW_NO_AUTO_VIF			= 1<<15,
+	IEEE80211_HW_SW_CRYPTO_CONTROL			= 1<<16,
 	/* free slots */
 	IEEE80211_HW_REPORTS_TX_ACK_STATUS		= 1<<18,
 	IEEE80211_HW_CONNECTION_MONITOR			= 1<<19,
@@ -1955,6 +1969,11 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * added; if you return 0 then hw_key_idx must be assigned to the
  * hardware key index, you are free to use the full u8 range.
  *
+ * Note that in the case that the @IEEE80211_HW_SW_CRYPTO_CONTROL flag is
+ * set, mac80211 will not automatically fall back to software crypto if
+ * enabling hardware crypto failed. The set_key() call may also return the
+ * value 1 to permit this specific key/algorithm to be done in software.
+ *
  * When the cmd is %DISABLE_KEY then it must succeed.
  *
  * Note that it is permissible to not decrypt a frame even if a key
@@ -4079,6 +4098,10 @@ void ieee80211_aes_cmac_calculate_k1_k2(struct ieee80211_key_conf *keyconf,
  *	reverse order than in packet)
  * @aes_cmac: PN data, most significant byte first (big endian,
  *	reverse order than in packet)
+ * @aes_gmac: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ * @gcmp: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
  */
 struct ieee80211_key_seq {
 	union {
@@ -4092,6 +4115,12 @@ struct ieee80211_key_seq {
 		struct {
 			u8 pn[6];
 		} aes_cmac;
+		struct {
+			u8 pn[6];
+		} aes_gmac;
+		struct {
+			u8 pn[6];
+		} gcmp;
 	};
 };
 
@@ -4116,7 +4145,7 @@ void ieee80211_get_key_tx_seq(struct ieee80211_key_conf *keyconf,
  * ieee80211_get_key_rx_seq - get key RX sequence counter
  *
  * @keyconf: the parameter passed with the set key
- * @tid: The TID, or -1 for the management frame value (CCMP only);
+ * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
  *	the value on TID 0 is also used for non-QoS frames. For
  *	CMAC, only TID 0 is valid.
  * @seq: buffer to receive the sequence data
@@ -4152,7 +4181,7 @@ void ieee80211_set_key_tx_seq(struct ieee80211_key_conf *keyconf,
  * ieee80211_set_key_rx_seq - set key RX sequence counter
  *
  * @keyconf: the parameter passed with the set key
- * @tid: The TID, or -1 for the management frame value (CCMP only);
+ * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
  *	the value on TID 0 is also used for non-QoS frames. For
  *	CMAC, only TID 0 is valid.
  * @seq: new sequence data