Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:
   - Add sunxi_nand randomizer support
   - begin refactoring NAND ecclayout structs
   - fix pxa3xx_nand dmaengine usage
   - brcmnand: fix support for v7.1 controller
   - add Qualcomm NAND controller driver

  SPI NOR:
   - add new ls1021a, ls2080a support to Freescale QuadSPI
   - add new flash ID entries
   - support bottom-block protection for Winbond flash
   - support Status Register Write Protect
   - remove broken QPI support for Micron SPI flash

  JFFS2:
   - improve post-mount CRC scan efficiency

  General:
   - refactor bcm63xxpart parser, to later extend for NAND
   - add writebuf size parameter to mtdram

  Other minor code quality improvements"

* tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits)
  mtd: nand: remove kerneldoc for removed function parameter
  mtd: nand: Qualcomm NAND controller driver
  dt/bindings: qcom_nandc: Add DT bindings
  mtd: nand: don't select chip in nand_chip's block_bad op
  mtd: spi-nor: support lock/unlock for a few Winbond chips
  mtd: spi-nor: add TB (Top/Bottom) protect support
  mtd: spi-nor: add SPI_NOR_HAS_LOCK flag
  mtd: spi-nor: use BIT() for flash_info flags
  mtd: spi-nor: disallow further writes to SR if WP# is low
  mtd: spi-nor: make lock/unlock bounds checks more obvious and robust
  mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region
  mtd: spi-nor: wait for SR_WIP to clear on initial unlock
  mtd: nand: simplify nand_bch_init() usage
  mtd: mtdswap: remove useless if (!mtd->ecclayout) test
  mtd: create an mtd_oobavail() helper and make use of it
  mtd: kill the ecclayout->oobavail field
  mtd: nand: check status before reporting timeout
  mtd: bcm63xxpart: give width specifier an 'int', not 'size_t'
  mtd: mtdram: Add parameter for setting writebuf size
  mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd'
  ...

4 files changed, 47 insertions, 29 deletions

diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index 95d5880a63ee..7e553f286775 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -134,37 +134,59 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
 	if (mutex_lock_interruptible(&c->alloc_sem))
 		return -EINTR;
 
+
 	for (;;) {
+		/* We can't start doing GC until we've finished checking
+		   the node CRCs etc. */
+		int bucket, want_ino;
+
 		spin_lock(&c->erase_completion_lock);
 		if (!c->unchecked_size)
 			break;
-
-		/* We can't start doing GC yet. We haven't finished checking
-		   the node CRCs etc. Do it now. */
-
-		/* checked_ino is protected by the alloc_sem */
-		if (c->checked_ino > c->highest_ino && xattr) {
-			pr_crit("Checked all inodes but still 0x%x bytes of unchecked space?\n",
-				c->unchecked_size);
-			jffs2_dbg_dump_block_lists_nolock(c);
-			spin_unlock(&c->erase_completion_lock);
-			mutex_unlock(&c->alloc_sem);
-			return -ENOSPC;
-		}
-
 		spin_unlock(&c->erase_completion_lock);
 
 		if (!xattr)
 			xattr = jffs2_verify_xattr(c);
 
 		spin_lock(&c->inocache_lock);
+		/* Instead of doing the inodes in numeric order, doing a lookup
+		 * in the hash for each possible number, just walk the hash
+		 * buckets of *existing* inodes. This means that we process
+		 * them out-of-order, but it can be a lot faster if there's
+		 * a sparse inode# space. Which there often is. */
+		want_ino = c->check_ino;
+		for (bucket = c->check_ino % c->inocache_hashsize ; bucket < c->inocache_hashsize; bucket++) {
+			for (ic = c->inocache_list[bucket]; ic; ic = ic->next) {
+				if (ic->ino < want_ino)
+					continue;
+
+				if (ic->state != INO_STATE_CHECKEDABSENT &&
+				    ic->state != INO_STATE_PRESENT)
+					goto got_next; /* with inocache_lock held */
+
+				jffs2_dbg(1, "Skipping ino #%u already checked\n",
+					  ic->ino);
+			}
+			want_ino = 0;
+		}
 
-		ic = jffs2_get_ino_cache(c, c->checked_ino++);
+		/* Point c->check_ino past the end of the last bucket. */
+		c->check_ino = ((c->highest_ino + c->inocache_hashsize + 1) &
+				~c->inocache_hashsize) - 1;
 
-		if (!ic) {
-			spin_unlock(&c->inocache_lock);
-			continue;
-		}
+		spin_unlock(&c->inocache_lock);
+
+		pr_crit("Checked all inodes but still 0x%x bytes of unchecked space?\n",
+			c->unchecked_size);
+		jffs2_dbg_dump_block_lists_nolock(c);
+		mutex_unlock(&c->alloc_sem);
+		return -ENOSPC;
+
+	got_next:
+		/* For next time round the loop, we want c->checked_ino to indicate
+		 * the *next* one we want to check. And since we're walking the
+		 * buckets rather than doing it sequentially, it's: */
+		c->check_ino = ic->ino + c->inocache_hashsize;
 
 		if (!ic->pino_nlink) {
 			jffs2_dbg(1, "Skipping check of ino #%d with nlink/pino zero\n",
@@ -176,8 +198,6 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
 		switch(ic->state) {
 		case INO_STATE_CHECKEDABSENT:
 		case INO_STATE_PRESENT:
-			jffs2_dbg(1, "Skipping ino #%u already checked\n",
-				  ic->ino);
 			spin_unlock(&c->inocache_lock);
 			continue;
 
@@ -196,7 +216,7 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
 				  ic->ino);
 			/* We need to come back again for the _same_ inode. We've
 			 made no progress in this case, but that should be OK */
-			c->checked_ino--;
+			c->check_ino = ic->ino;
 
 			mutex_unlock(&c->alloc_sem);
 			sleep_on_spinunlock(&c->inocache_wq, &c->inocache_lock);
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index 046fee8b6e9b..778275f48a87 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -49,7 +49,7 @@ struct jffs2_sb_info {
 	struct mtd_info *mtd;
 
 	uint32_t highest_ino;
-	uint32_t checked_ino;
+	uint32_t check_ino;		/* *NEXT* inode to be checked */
 
 	unsigned int flags;
 
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index b6bd4affd9ad..cda0774c2c9c 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -846,8 +846,8 @@ int jffs2_thread_should_wake(struct jffs2_sb_info *c)
 		return 1;
 
 	if (c->unchecked_size) {
-		jffs2_dbg(1, "jffs2_thread_should_wake(): unchecked_size %d, checked_ino #%d\n",
-			  c->unchecked_size, c->checked_ino);
+		jffs2_dbg(1, "jffs2_thread_should_wake(): unchecked_size %d, check_ino #%d\n",
+			  c->unchecked_size, c->check_ino);
 		return 1;
 	}
 
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 5a3da3f52908..b25d28a21212 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -1183,22 +1183,20 @@ void jffs2_dirty_trigger(struct jffs2_sb_info *c)
 
 int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
 {
-	struct nand_ecclayout *oinfo = c->mtd->ecclayout;
-
 	if (!c->mtd->oobsize)
 		return 0;
 
 	/* Cleanmarker is out-of-band, so inline size zero */
 	c->cleanmarker_size = 0;
 
-	if (!oinfo || oinfo->oobavail == 0) {
+	if (c->mtd->oobavail == 0) {
 		pr_err("inconsistent device description\n");
 		return -EINVAL;
 	}
 
 	jffs2_dbg(1, "using OOB on NAND\n");
 
-	c->oobavail = oinfo->oobavail;
+	c->oobavail = c->mtd->oobavail;
 
 	/* Initialise write buffer */
 	init_rwsem(&c->wbuf_sem);