Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the changes this time are for incorrect device nodes in
  various ways, on on imx, berlin, exynos, ux500, uniphier, omap and
  meson.

  Chen-Yu Tsai now co-maintains mach-sunxi (Allwinner).

  Other bug fixes include
   - a partial revert of a broken tegra gpio patch
   - irq affinity for arm ccn
   - suspend on one Armada 385 machine
   - enable ZONE_DMA to avoid an OMAP crash for over 2GB RAM
   - turning on a regulator on beagleboard-x15 for HDMI
   - making the omap gpmc debug code visible
   - setup of orion network switch
   - a rare build regression for pxa"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init
  thermal: exynos: Fix register read in TMU
  ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
  ARM: tegra: Comment out gpio-ranges properties
  ARM: dts: uniphier: fix IRQ number for devices on PH1-LD6b ref board
  drivers/perf: arm_pmu: avoid CPU device_node reference leak
  bus: arm-ccn: Fix irq affinity setting on CPU migration
  bus: arm-ccn: Handle correctly no-more-cpus case
  ARM: mvebu: correct a385-db-ap compatible string
  ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers
  MAINTAINERS: Update Allwinner entry and add new maintainer
  ARM: ux500: modify initial levelshifter status
  ARM: pxa: fix pxa3xx DFI lockup hack
  Documentation: ARM: List new omap MMC requirements
  memory: omap-gpmc: dump "before" state before first modification
  memory: omap-gpmc: Fix unselectable debug option for GPMC
  ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on
  ARM: dts: Fix audio card detection on Peach boards
  ARM: EXYNOS: Fix double of_node_put() when parsing child power domains
  ARM: orion: Fix DSA platform device after mvmdio conversion
  ...

5 files changed, 22 insertions, 9 deletions

diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 7d9879e166cf..7082c7268845 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -1184,11 +1184,12 @@ static int arm_ccn_pmu_cpu_notifier(struct notifier_block *nb,
 		if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
 			break;
 		target = cpumask_any_but(cpu_online_mask, cpu);
-		if (target < 0)
+		if (target >= nr_cpu_ids)
 			break;
 		perf_pmu_migrate_context(&dt->pmu, cpu, target);
 		cpumask_set_cpu(target, &dt->cpu);
-		WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+		if (ccn->irq)
+			WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
 	default:
 		break;
 	}
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index c6a644b22af4..6f3154613dc7 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -58,12 +58,18 @@ config OMAP_GPMC
 	  memory drives like NOR, NAND, OneNAND, SRAM.
 
 config OMAP_GPMC_DEBUG
-	bool
+	bool "Enable GPMC debug output and skip reset of GPMC during init"
 	depends on OMAP_GPMC
 	help
 	  Enables verbose debugging mostly to decode the bootloader provided
-	  timings. Enable this during development to configure devices
-	  connected to the GPMC bus.
+	  timings. To preserve the bootloader provided timings, the reset
+	  of GPMC is skipped during init. Enable this during development to
+	  configure devices connected to the GPMC bus.
+
+	  NOTE: In addition to matching the register setup with the bootloader
+	  you also need to match the GPMC FCLK frequency used by the
+	  bootloader or else the GPMC timings won't be identical with the
+	  bootloader timings.
 
 config MVEBU_DEVBUS
 	bool "Marvell EBU Device Bus Controller"
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 32ac049f2bc4..6515dfc2b805 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -696,7 +696,6 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t,
 	int div;
 	u32 l;
 
-	gpmc_cs_show_timings(cs, "before gpmc_cs_set_timings");
 	div = gpmc_calc_divider(t->sync_clk);
 	if (div < 0)
 		return div;
@@ -1988,6 +1987,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	if (ret < 0)
 		goto err;
 
+	gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings");
 	ret = gpmc_cs_program_settings(cs, &gpmc_s);
 	if (ret < 0)
 		goto err;
diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 2365a32a595e..be3755c973e9 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -823,9 +823,15 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu)
 		}
 
 		/* Now look up the logical CPU number */
-		for_each_possible_cpu(cpu)
-			if (dn == of_cpu_device_node_get(cpu))
+		for_each_possible_cpu(cpu) {
+			struct device_node *cpu_dn;
+
+			cpu_dn = of_cpu_device_node_get(cpu);
+			of_node_put(cpu_dn);
+
+			if (dn == cpu_dn)
 				break;
+		}
 
 		if (cpu >= nr_cpu_ids) {
 			pr_warn("Failed to find logical CPU for %s\n",
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 0bae8cc6c23a..ca920b0ecf8f 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -932,7 +932,7 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
 
 	if (data->soc == SOC_ARCH_EXYNOS5260)
 		emul_con = EXYNOS5260_EMUL_CON;
-	if (data->soc == SOC_ARCH_EXYNOS5433)
+	else if (data->soc == SOC_ARCH_EXYNOS5433)
 		emul_con = EXYNOS5433_TMU_EMUL_CON;
 	else if (data->soc == SOC_ARCH_EXYNOS7)
 		emul_con = EXYNOS7_TMU_REG_EMUL_CON;