Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

137 files changed, 6373 insertions, 4309 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index dce39a95fa71..3c200a243af0 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -79,7 +79,7 @@ obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_UWB)		+= uwb/
-obj-$(CONFIG_USB_OTG_UTILS)	+= usb/
+obj-$(CONFIG_USB_PHY)		+= usb/
 obj-$(CONFIG_USB)		+= usb/
 obj-$(CONFIG_PCI)		+= usb/
 obj-$(CONFIG_USB_GADGET)	+= usb/
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9e00c389e777..ffe02fb7cbc7 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -254,7 +254,7 @@ config BATTERY_RX51
 
 config CHARGER_ISP1704
 	tristate "ISP1704 USB Charger Detection"
-	depends on USB_OTG_UTILS
+	depends on USB_PHY
 	help
 	  Say Y to enable support for USB Charger Detection with
 	  ISP1707/ISP1704 USB transceivers.
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index 7df7c5facc10..0c52e2a0d90c 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -35,7 +35,7 @@ static struct timer_list supply_timer;
 static struct timer_list polling_timer;
 static int polling;
 
-#ifdef CONFIG_USB_OTG_UTILS
+#if IS_ENABLED(CONFIG_USB_PHY)
 static struct usb_phy *transceiver;
 static struct notifier_block otg_nb;
 #endif
@@ -218,7 +218,7 @@ static void polling_timer_func(unsigned long unused)
 		  jiffies + msecs_to_jiffies(pdata->polling_interval));
 }
 
-#ifdef CONFIG_USB_OTG_UTILS
+#if IS_ENABLED(CONFIG_USB_PHY)
 static int otg_is_usb_online(void)
 {
 	return (transceiver->last_event == USB_EVENT_VBUS ||
@@ -315,7 +315,7 @@ static int pda_power_probe(struct platform_device *pdev)
 		pda_psy_usb.num_supplicants = pdata->num_supplicants;
 	}
 
-#ifdef CONFIG_USB_OTG_UTILS
+#if IS_ENABLED(CONFIG_USB_PHY)
 	transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (!IS_ERR_OR_NULL(transceiver)) {
 		if (!pdata->is_usb_online)
@@ -367,7 +367,7 @@ static int pda_power_probe(struct platform_device *pdev)
 		}
 	}
 
-#ifdef CONFIG_USB_OTG_UTILS
+#if IS_ENABLED(CONFIG_USB_PHY)
 	if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier) {
 		otg_nb.notifier_call = otg_handle_notification;
 		ret = usb_register_notifier(transceiver, &otg_nb);
@@ -391,7 +391,7 @@ static int pda_power_probe(struct platform_device *pdev)
 
 	return 0;
 
-#ifdef CONFIG_USB_OTG_UTILS
+#if IS_ENABLED(CONFIG_USB_PHY)
 otg_reg_notifier_failed:
 	if (pdata->is_usb_online && usb_irq)
 		free_irq(usb_irq->start, &pda_psy_usb);
@@ -402,7 +402,7 @@ usb_irq_failed:
 usb_supply_failed:
 	if (pdata->is_ac_online && ac_irq)
 		free_irq(ac_irq->start, &pda_psy_ac);
-#ifdef CONFIG_USB_OTG_UTILS
+#if IS_ENABLED(CONFIG_USB_PHY)
 	if (!IS_ERR_OR_NULL(transceiver))
 		usb_put_phy(transceiver);
 #endif
@@ -437,7 +437,7 @@ static int pda_power_remove(struct platform_device *pdev)
 		power_supply_unregister(&pda_psy_usb);
 	if (pdata->is_ac_online)
 		power_supply_unregister(&pda_psy_ac);
-#ifdef CONFIG_USB_OTG_UTILS
+#if IS_ENABLED(CONFIG_USB_PHY)
 	if (!IS_ERR_OR_NULL(transceiver))
 		usb_put_phy(transceiver);
 #endif
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 640ae6c6d2d2..2c481b808276 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -186,6 +186,4 @@ source "drivers/usb/atm/Kconfig"
 
 source "drivers/usb/gadget/Kconfig"
 
-source "drivers/usb/otg/Kconfig"
-
 endif # USB_SUPPORT
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 8f5ebced5df0..c41feba8d5c0 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -6,8 +6,6 @@
 
 obj-$(CONFIG_USB)		+= core/
 
-obj-$(CONFIG_USB_OTG_UTILS)	+= otg/
-
 obj-$(CONFIG_USB_DWC3)		+= dwc3/
 
 obj-$(CONFIG_USB_MON)		+= mon/
@@ -46,7 +44,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-$(CONFIG_USB_OTG_UTILS)	+= phy/
+obj-$(CONFIG_USB_PHY)		+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 3d90e6189731..519ead2443c5 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1639,16 +1639,6 @@ static irqreturn_t udc_irq(struct ci13xxx *ci)
 }
 
 /**
- * udc_release: driver release function
- * @dev: device
- *
- * Currently does nothing
- */
-static void udc_release(struct device *dev)
-{
-}
-
-/**
  * udc_start: initialize gadget role
  * @ci: chipidea controller
  */
@@ -1667,12 +1657,6 @@ static int udc_start(struct ci13xxx *ci)
 
 	INIT_LIST_HEAD(&ci->gadget.ep_list);
 
-	dev_set_name(&ci->gadget.dev, "gadget");
-	ci->gadget.dev.dma_mask = dev->dma_mask;
-	ci->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
-	ci->gadget.dev.parent   = dev;
-	ci->gadget.dev.release  = udc_release;
-
 	/* alloc resources */
 	ci->qh_pool = dma_pool_create("ci13xxx_qh", dev,
 				       sizeof(struct ci13xxx_qh),
@@ -1710,17 +1694,11 @@ static int udc_start(struct ci13xxx *ci)
 			goto put_transceiver;
 	}
 
-	retval = device_register(&ci->gadget.dev);
-	if (retval) {
-		put_device(&ci->gadget.dev);
-		goto put_transceiver;
-	}
-
 	if (!IS_ERR_OR_NULL(ci->transceiver)) {
 		retval = otg_set_peripheral(ci->transceiver->otg,
 						&ci->gadget);
 		if (retval)
-			goto unreg_device;
+			goto put_transceiver;
 	}
 
 	retval = usb_add_gadget_udc(dev, &ci->gadget);
@@ -1740,8 +1718,6 @@ remove_trans:
 	}
 
 	dev_err(dev, "error = %i\n", retval);
-unreg_device:
-	device_unregister(&ci->gadget.dev);
 put_transceiver:
 	if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy)
 		usb_put_phy(ci->transceiver);
@@ -1776,7 +1752,6 @@ static void udc_stop(struct ci13xxx *ci)
 		if (ci->global_phy)
 			usb_put_phy(ci->transceiver);
 	}
-	device_unregister(&ci->gadget.dev);
 	/* my kobject is dynamic, I swear! */
 	memset(&ci->gadget, 0, sizeof(ci->gadget));
 }
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 68e9a2c5a01a..ea5ee9c21c35 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,7 +1,6 @@
 config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
 	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS
-	select USB_OTG_UTILS
 	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
 	help
 	  Say Y or M here if your system has a Dual Role SuperSpeed
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index ffa6b004a84b..c35d49d39b76 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -140,7 +140,8 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
  * Returns a pointer to the allocated event buffer structure on success
  * otherwise ERR_PTR(errno).
  */
-static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
+static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc,
+		unsigned length)
 {
 	struct dwc3_event_buffer	*evt;
 
@@ -259,6 +260,17 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
 	}
 }
 
+static void dwc3_core_num_eps(struct dwc3 *dwc)
+{
+	struct dwc3_hwparams	*parms = &dwc->hwparams;
+
+	dwc->num_in_eps = DWC3_NUM_IN_EPS(parms);
+	dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps;
+
+	dev_vdbg(dwc->dev, "found %d IN and %d OUT endpoints\n",
+			dwc->num_in_eps, dwc->num_out_eps);
+}
+
 static void dwc3_cache_hwparams(struct dwc3 *dwc)
 {
 	struct dwc3_hwparams	*parms = &dwc->hwparams;
@@ -335,13 +347,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	if (dwc->revision < DWC3_REVISION_190A)
 		reg |= DWC3_GCTL_U2RSTECN;
 
-	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+	dwc3_core_num_eps(dwc);
 
-	ret = dwc3_event_buffers_setup(dwc);
-	if (ret) {
-		dev_err(dwc->dev, "failed to setup event buffers\n");
-		goto err0;
-	}
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
 	return 0;
 
@@ -351,8 +359,6 @@ err0:
 
 static void dwc3_core_exit(struct dwc3 *dwc)
 {
-	dwc3_event_buffers_cleanup(dwc);
-
 	usb_phy_shutdown(dwc->usb2_phy);
 	usb_phy_shutdown(dwc->usb3_phy);
 }
@@ -428,12 +434,32 @@ static int dwc3_probe(struct platform_device *pdev)
 		dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
 	}
 
-	if (IS_ERR_OR_NULL(dwc->usb2_phy)) {
+	if (IS_ERR(dwc->usb2_phy)) {
+		ret = PTR_ERR(dwc->usb2_phy);
+
+		/*
+		 * if -ENXIO is returned, it means PHY layer wasn't
+		 * enabled, so it makes no sense to return -EPROBE_DEFER
+		 * in that case, since no PHY driver will ever probe.
+		 */
+		if (ret == -ENXIO)
+			return ret;
+
 		dev_err(dev, "no usb2 phy configured\n");
 		return -EPROBE_DEFER;
 	}
 
-	if (IS_ERR_OR_NULL(dwc->usb3_phy)) {
+	if (IS_ERR(dwc->usb3_phy)) {
+		ret = PTR_ERR(dwc->usb2_phy);
+
+		/*
+		 * if -ENXIO is returned, it means PHY layer wasn't
+		 * enabled, so it makes no sense to return -EPROBE_DEFER
+		 * in that case, since no PHY driver will ever probe.
+		 */
+		if (ret == -ENXIO)
+			return ret;
+
 		dev_err(dev, "no usb3 phy configured\n");
 		return -EPROBE_DEFER;
 	}
@@ -448,6 +474,10 @@ static int dwc3_probe(struct platform_device *pdev)
 	dwc->regs_size	= resource_size(res);
 	dwc->dev	= dev;
 
+	dev->dma_mask	= dev->parent->dma_mask;
+	dev->dma_parms	= dev->parent->dma_parms;
+	dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
+
 	if (!strncmp("super", maximum_speed, 5))
 		dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
 	else if (!strncmp("high", maximum_speed, 4))
@@ -480,7 +510,18 @@ static int dwc3_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	mode = DWC3_MODE(dwc->hwparams.hwparams0);
+	ret = dwc3_event_buffers_setup(dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to setup event buffers\n");
+		goto err1;
+	}
+
+	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+		mode = DWC3_MODE_HOST;
+	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+		mode = DWC3_MODE_DEVICE;
+	else
+		mode = DWC3_MODE_DRD;
 
 	switch (mode) {
 	case DWC3_MODE_DEVICE:
@@ -488,7 +529,7 @@ static int dwc3_probe(struct platform_device *pdev)
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
 			dev_err(dev, "failed to initialize gadget\n");
-			goto err1;
+			goto err2;
 		}
 		break;
 	case DWC3_MODE_HOST:
@@ -496,7 +537,7 @@ static int dwc3_probe(struct platform_device *pdev)
 		ret = dwc3_host_init(dwc);
 		if (ret) {
 			dev_err(dev, "failed to initialize host\n");
-			goto err1;
+			goto err2;
 		}
 		break;
 	case DWC3_MODE_DRD:
@@ -504,32 +545,32 @@ static int dwc3_probe(struct platform_device *pdev)
 		ret = dwc3_host_init(dwc);
 		if (ret) {
 			dev_err(dev, "failed to initialize host\n");
-			goto err1;
+			goto err2;
 		}
 
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
 			dev_err(dev, "failed to initialize gadget\n");
-			goto err1;
+			goto err2;
 		}
 		break;
 	default:
 		dev_err(dev, "Unsupported mode of operation %d\n", mode);
-		goto err1;
+		goto err2;
 	}
 	dwc->mode = mode;
 
 	ret = dwc3_debugfs_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize debugfs\n");
-		goto err2;
+		goto err3;
 	}
 
 	pm_runtime_allow(dev);
 
 	return 0;
 
-err2:
+err3:
 	switch (mode) {
 	case DWC3_MODE_DEVICE:
 		dwc3_gadget_exit(dwc);
@@ -546,6 +587,9 @@ err2:
 		break;
 	}
 
+err2:
+	dwc3_event_buffers_cleanup(dwc);
+
 err1:
 	dwc3_core_exit(dwc);
 
@@ -583,12 +627,130 @@ static int dwc3_remove(struct platform_device *pdev)
 		break;
 	}
 
+	dwc3_event_buffers_cleanup(dwc);
 	dwc3_free_event_buffers(dwc);
 	dwc3_core_exit(dwc);
 
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int dwc3_prepare(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	switch (dwc->mode) {
+	case DWC3_MODE_DEVICE:
+	case DWC3_MODE_DRD:
+		dwc3_gadget_prepare(dwc);
+		/* FALLTHROUGH */
+	case DWC3_MODE_HOST:
+	default:
+		dwc3_event_buffers_cleanup(dwc);
+		break;
+	}
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
+static void dwc3_complete(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	switch (dwc->mode) {
+	case DWC3_MODE_DEVICE:
+	case DWC3_MODE_DRD:
+		dwc3_gadget_complete(dwc);
+		/* FALLTHROUGH */
+	case DWC3_MODE_HOST:
+	default:
+		dwc3_event_buffers_setup(dwc);
+		break;
+	}
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+}
+
+static int dwc3_suspend(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	switch (dwc->mode) {
+	case DWC3_MODE_DEVICE:
+	case DWC3_MODE_DRD:
+		dwc3_gadget_suspend(dwc);
+		/* FALLTHROUGH */
+	case DWC3_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	usb_phy_shutdown(dwc->usb3_phy);
+	usb_phy_shutdown(dwc->usb2_phy);
+
+	return 0;
+}
+
+static int dwc3_resume(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	unsigned long	flags;
+
+	usb_phy_init(dwc->usb3_phy);
+	usb_phy_init(dwc->usb2_phy);
+	msleep(100);
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
+
+	switch (dwc->mode) {
+	case DWC3_MODE_DEVICE:
+	case DWC3_MODE_DRD:
+		dwc3_gadget_resume(dwc);
+		/* FALLTHROUGH */
+	case DWC3_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops dwc3_dev_pm_ops = {
+	.prepare	= dwc3_prepare,
+	.complete	= dwc3_complete,
+
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+};
+
+#define DWC3_PM_OPS	&(dwc3_dev_pm_ops)
+#else
+#define DWC3_PM_OPS	NULL
+#endif
+
 #ifdef CONFIG_OF
 static const struct of_device_id of_dwc3_match[] = {
 	{
@@ -605,6 +767,7 @@ static struct platform_driver dwc3_driver = {
 	.driver		= {
 		.name	= "dwc3",
 		.of_match_table	= of_match_ptr(of_dwc3_match),
+		.pm	= DWC3_PM_OPS,
 	},
 };
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index b41750660235..b69d322e3cab 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -154,8 +154,9 @@
 /* OTG Registers */
 #define DWC3_OCFG		0xcc00
 #define DWC3_OCTL		0xcc04
-#define DWC3_OEVTEN		0xcc08
-#define DWC3_OSTS		0xcc0C
+#define DWC3_OEVT		0xcc08
+#define DWC3_OEVTEN		0xcc0C
+#define DWC3_OSTS		0xcc10
 
 /* Bit fields */
 
@@ -369,6 +370,9 @@ struct dwc3_trb;
  * @list: a list of event buffers
  * @buf: _THE_ buffer
  * @length: size of this buffer
+ * @lpos: event offset
+ * @count: cache of last read event count register
+ * @flags: flags related to this event buffer
  * @dma: dma_addr_t
  * @dwc: pointer to DWC controller
  */
@@ -376,6 +380,10 @@ struct dwc3_event_buffer {
 	void			*buf;
 	unsigned		length;
 	unsigned int		lpos;
+	unsigned int		count;
+	unsigned int		flags;
+
+#define DWC3_EVENT_PENDING	BIT(0)
 
 	dma_addr_t		dma;
 
@@ -487,12 +495,6 @@ enum dwc3_link_state {
 	DWC3_LINK_STATE_MASK		= 0x0f,
 };
 
-enum dwc3_device_state {
-	DWC3_DEFAULT_STATE,
-	DWC3_ADDRESS_STATE,
-	DWC3_CONFIGURED_STATE,
-};
-
 /* TRB Length, PCM and Status */
 #define DWC3_TRB_SIZE_MASK	(0x00ffffff)
 #define DWC3_TRB_SIZE_LENGTH(n)	((n) & DWC3_TRB_SIZE_MASK)
@@ -574,6 +576,14 @@ struct dwc3_hwparams {
 /* HWPARAMS1 */
 #define DWC3_NUM_INT(n)		(((n) & (0x3f << 15)) >> 15)
 
+/* HWPARAMS3 */
+#define DWC3_NUM_IN_EPS_MASK	(0x1f << 18)
+#define DWC3_NUM_EPS_MASK	(0x3f << 12)
+#define DWC3_NUM_EPS(p)		(((p)->hwparams3 &		\
+			(DWC3_NUM_EPS_MASK)) >> 12)
+#define DWC3_NUM_IN_EPS(p)	(((p)->hwparams3 &		\
+			(DWC3_NUM_IN_EPS_MASK)) >> 18)
+
 /* HWPARAMS7 */
 #define DWC3_RAM1_DEPTH(n)	((n) & 0xffff)
 
@@ -618,7 +628,6 @@ struct dwc3_scratchpad_array {
  * @gadget_driver: pointer to the gadget driver
  * @regs: base address for our registers
  * @regs_size: address space size
- * @irq: IRQ number
  * @num_event_buffers: calculated number of event buffers
  * @u1u2: only used on revisions <1.83a for workaround
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
@@ -626,6 +635,8 @@ struct dwc3_scratchpad_array {
  * @mode: mode of operation
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
+ * @dcfg: saved contents of DCFG register
+ * @gctl: saved contents of GCTL register
  * @is_selfpowered: true when we are selfpowered
  * @three_stage_setup: set if we perform a three phase setup
  * @ep0_bounced: true when we used bounce buffer
@@ -639,6 +650,8 @@ struct dwc3_scratchpad_array {
  * @u2pel: parameter from Set SEL request.
  * @u1sel: parameter from Set SEL request.
  * @u1pel: parameter from Set SEL request.
+ * @num_out_eps: number of out endpoints
+ * @num_in_eps: number of in endpoints
  * @ep0_next_event: hold the next expected event
  * @ep0state: state of endpoint zero
  * @link_state: link state
@@ -656,8 +669,10 @@ struct dwc3 {
 	dma_addr_t		ep0_trb_addr;
 	dma_addr_t		ep0_bounce_addr;
 	struct dwc3_request	ep0_usb_req;
+
 	/* device lock */
 	spinlock_t		lock;
+
 	struct device		*dev;
 
 	struct platform_device	*xhci;
@@ -675,6 +690,10 @@ struct dwc3 {
 	void __iomem		*regs;
 	size_t			regs_size;
 
+	/* used for suspend/resume */
+	u32			dcfg;
+	u32			gctl;
+
 	u32			num_event_buffers;
 	u32			u1u2;
 	u32			maximum_speed;
@@ -694,6 +713,9 @@ struct dwc3 {
 #define DWC3_REVISION_202A	0x5533202a
 #define DWC3_REVISION_210A	0x5533210a
 #define DWC3_REVISION_220A	0x5533220a
+#define DWC3_REVISION_230A	0x5533230a
+#define DWC3_REVISION_240A	0x5533240a
+#define DWC3_REVISION_250A	0x5533250a
 
 	unsigned		is_selfpowered:1;
 	unsigned		three_stage_setup:1;
@@ -704,11 +726,11 @@ struct dwc3 {
 	unsigned		delayed_status:1;
 	unsigned		needs_fifo_resize:1;
 	unsigned		resize_fifos:1;
+	unsigned		pullups_connected:1;
 
 	enum dwc3_ep0_next	ep0_next_event;
 	enum dwc3_ep0_state	ep0state;
 	enum dwc3_link_state	link_state;
-	enum dwc3_device_state	dev_state;
 
 	u16			isoch_delay;
 	u16			u2sel;
@@ -718,6 +740,9 @@ struct dwc3 {
 
 	u8			speed;
 
+	u8			num_out_eps;
+	u8			num_in_eps;
+
 	void			*mem;
 
 	struct dwc3_hwparams	hwparams;
@@ -884,4 +909,31 @@ static inline void dwc3_gadget_exit(struct dwc3 *dwc)
 { }
 #endif
 
+/* power management interface */
+#if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
+int dwc3_gadget_prepare(struct dwc3 *dwc);
+void dwc3_gadget_complete(struct dwc3 *dwc);
+int dwc3_gadget_suspend(struct dwc3 *dwc);
+int dwc3_gadget_resume(struct dwc3 *dwc);
+#else
+static inline int dwc3_gadget_prepare(struct dwc3 *dwc)
+{
+	return 0;
+}
+
+static inline void dwc3_gadget_complete(struct dwc3 *dwc)
+{
+}
+
+static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
+{
+	return 0;
+}
+
+static inline int dwc3_gadget_resume(struct dwc3 *dwc)
+{
+	return 0;
+}
+#endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
+
 #endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 4a752e730c5f..9e9f122162f2 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -59,7 +59,7 @@
 	.offset	= DWC3_ ##nm - DWC3_GLOBALS_REGS_START,	\
 }
 
-static struct debugfs_reg32 dwc3_regs[] = {
+static const struct debugfs_reg32 dwc3_regs[] = {
 	dump_register(GSBUSCFG0),
 	dump_register(GSBUSCFG1),
 	dump_register(GTXTHRCFG),
@@ -372,6 +372,7 @@ static struct debugfs_reg32 dwc3_regs[] = {
 
 	dump_register(OCFG),
 	dump_register(OCTL),
+	dump_register(OEVT),
 	dump_register(OEVTEN),
 	dump_register(OSTS),
 };
@@ -577,8 +578,14 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused)
 	case DWC3_LINK_STATE_LPBK:
 		seq_printf(s, "Loopback\n");
 		break;
+	case DWC3_LINK_STATE_RESET:
+		seq_printf(s, "Reset\n");
+		break;
+	case DWC3_LINK_STATE_RESUME:
+		seq_printf(s, "Resume\n");
+		break;
 	default:
-		seq_printf(s, "UNKNOWN %d\n", reg);
+		seq_printf(s, "UNKNOWN %d\n", state);
 	}
 
 	return 0;
@@ -661,28 +668,31 @@ int dwc3_debugfs_init(struct dwc3 *dwc)
 		goto err1;
 	}
 
-#if IS_ENABLED(CONFIG_USB_DWC3_GADGET)
-	file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root,
-			dwc, &dwc3_mode_fops);
-	if (!file) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root,
-			dwc, &dwc3_testmode_fops);
-	if (!file) {
-		ret = -ENOMEM;
-		goto err1;
+	if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) {
+		file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root,
+				dwc, &dwc3_mode_fops);
+		if (!file) {
+			ret = -ENOMEM;
+			goto err1;
+		}
 	}
 
-	file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root,
-			dwc, &dwc3_link_state_fops);
-	if (!file) {
-		ret = -ENOMEM;
-		goto err1;
+	if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) ||
+			IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
+		file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root,
+				dwc, &dwc3_testmode_fops);
+		if (!file) {
+			ret = -ENOMEM;
+			goto err1;
+		}
+
+		file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root,
+				dwc, &dwc3_link_state_fops);
+		if (!file) {
+			ret = -ENOMEM;
+			goto err1;
+		}
 	}
-#endif
 
 	return 0;
 
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index b082bec7343e..a8afe6e26621 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -22,9 +22,9 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 
 struct dwc3_exynos {
-	struct platform_device	*dwc3;
 	struct platform_device	*usb2_phy;
 	struct platform_device	*usb3_phy;
 	struct device		*dev;
@@ -86,21 +86,30 @@ err1:
 	return ret;
 }
 
+static int dwc3_exynos_remove_child(struct device *dev, void *unused)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
 static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
 
 static int dwc3_exynos_probe(struct platform_device *pdev)
 {
-	struct platform_device	*dwc3;
 	struct dwc3_exynos	*exynos;
 	struct clk		*clk;
 	struct device		*dev = &pdev->dev;
+	struct device_node	*node = dev->of_node;
 
 	int			ret = -ENOMEM;
 
 	exynos = devm_kzalloc(dev, sizeof(*exynos), GFP_KERNEL);
 	if (!exynos) {
 		dev_err(dev, "not enough memory\n");
-		return -ENOMEM;
+		goto err1;
 	}
 
 	/*
@@ -108,21 +117,15 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 	 * Since shared usb code relies on it, set it here for now.
 	 * Once we move to full device tree support this will vanish off.
 	 */
-	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &dwc3_exynos_dma_mask;
+	if (!dev->dma_mask)
+		dev->dma_mask = &dwc3_exynos_dma_mask;
 
 	platform_set_drvdata(pdev, exynos);
 
 	ret = dwc3_exynos_register_phys(exynos);
 	if (ret) {
 		dev_err(dev, "couldn't register PHYs\n");
-		return ret;
-	}
-
-	dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
-	if (!dwc3) {
-		dev_err(dev, "couldn't allocate dwc3 device\n");
-		return -ENOMEM;
+		goto err1;
 	}
 
 	clk = devm_clk_get(dev, "usbdrd30");
@@ -132,37 +135,28 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask);
-
-	dwc3->dev.parent = dev;
-	dwc3->dev.dma_mask = dev->dma_mask;
-	dwc3->dev.dma_parms = dev->dma_parms;
-	exynos->dwc3	= dwc3;
 	exynos->dev	= dev;
 	exynos->clk	= clk;
 
-	clk_enable(exynos->clk);
-
-	ret = platform_device_add_resources(dwc3, pdev->resource,
-			pdev->num_resources);
-	if (ret) {
-		dev_err(dev, "couldn't add resources to dwc3 device\n");
-		goto err2;
-	}
-
-	ret = platform_device_add(dwc3);
-	if (ret) {
-		dev_err(dev, "failed to register dwc3 device\n");
+	clk_prepare_enable(exynos->clk);
+
+	if (node) {
+		ret = of_platform_populate(node, NULL, NULL, dev);
+		if (ret) {
+			dev_err(dev, "failed to add dwc3 core\n");
+			goto err2;
+		}
+	} else {
+		dev_err(dev, "no device node, failed to add dwc3 core\n");
+		ret = -ENODEV;
 		goto err2;
 	}
 
 	return 0;
 
 err2:
-	clk_disable(clk);
+	clk_disable_unprepare(clk);
 err1:
-	platform_device_put(dwc3);
-
 	return ret;
 }
 
@@ -170,11 +164,11 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
 {
 	struct dwc3_exynos	*exynos = platform_get_drvdata(pdev);
 
-	platform_device_unregister(exynos->dwc3);
 	platform_device_unregister(exynos->usb2_phy);
 	platform_device_unregister(exynos->usb3_phy);
+	device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
 
-	clk_disable(exynos->clk);
+	clk_disable_unprepare(exynos->clk);
 
 	return 0;
 }
@@ -187,12 +181,46 @@ static const struct of_device_id exynos_dwc3_match[] = {
 MODULE_DEVICE_TABLE(of, exynos_dwc3_match);
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+static int dwc3_exynos_suspend(struct device *dev)
+{
+	struct dwc3_exynos *exynos = dev_get_drvdata(dev);
+
+	clk_disable(exynos->clk);
+
+	return 0;
+}
+
+static int dwc3_exynos_resume(struct device *dev)
+{
+	struct dwc3_exynos *exynos = dev_get_drvdata(dev);
+
+	clk_enable(exynos->clk);
+
+	/* runtime set active to reflect active state. */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops dwc3_exynos_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_exynos_suspend, dwc3_exynos_resume)
+};
+
+#define DEV_PM_OPS	(&dwc3_exynos_dev_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
 static struct platform_driver dwc3_exynos_driver = {
 	.probe		= dwc3_exynos_probe,
 	.remove		= dwc3_exynos_remove,
 	.driver		= {
 		.name	= "exynos-dwc3",
 		.of_match_table = of_match_ptr(exynos_dwc3_match),
+		.pm	= DEV_PM_OPS,
 	},
 };
 
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index afa05e3c9cf4..34638b92500d 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -52,7 +52,6 @@
 #include <linux/of_platform.h>
 
 #include <linux/usb/otg.h>
-#include <linux/usb/nop-usb-xceiv.h>
 
 /*
  * All these registers belong to OMAP's Wrapper around the
@@ -117,20 +116,17 @@ struct dwc3_omap {
 	/* device lock */
 	spinlock_t		lock;
 
-	struct platform_device	*usb2_phy;
-	struct platform_device	*usb3_phy;
 	struct device		*dev;
 
 	int			irq;
 	void __iomem		*base;
 
-	void			*context;
-	u32			resource_size;
+	u32			utmi_otg_status;
 
 	u32			dma_status:1;
 };
 
-struct dwc3_omap		*_omap;
+static struct dwc3_omap		*_omap;
 
 static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
 {
@@ -142,11 +138,14 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
 	writel(value, base + offset);
 }
 
-void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
+int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
 {
 	u32			val;
 	struct dwc3_omap	*omap = _omap;
 
+	if (!omap)
+		return -EPROBE_DEFER;
+
 	switch (status) {
 	case OMAP_DWC3_ID_GROUND:
 		dev_dbg(omap->dev, "ID GND\n");
@@ -189,63 +188,9 @@ void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
 		dev_dbg(omap->dev, "ID float\n");
 	}
 
-	return;
-}
-EXPORT_SYMBOL_GPL(dwc3_omap_mailbox);
-
-static int dwc3_omap_register_phys(struct dwc3_omap *omap)
-{
-	struct nop_usb_xceiv_platform_data pdata;
-	struct platform_device	*pdev;
-	int			ret;
-
-	memset(&pdata, 0x00, sizeof(pdata));
-
-	pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO);
-	if (!pdev)
-		return -ENOMEM;
-
-	omap->usb2_phy = pdev;
-	pdata.type = USB_PHY_TYPE_USB2;
-
-	ret = platform_device_add_data(omap->usb2_phy, &pdata, sizeof(pdata));
-	if (ret)
-		goto err1;
-
-	pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO);
-	if (!pdev) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	omap->usb3_phy = pdev;
-	pdata.type = USB_PHY_TYPE_USB3;
-
-	ret = platform_device_add_data(omap->usb3_phy, &pdata, sizeof(pdata));
-	if (ret)
-		goto err2;
-
-	ret = platform_device_add(omap->usb2_phy);
-	if (ret)
-		goto err2;
-
-	ret = platform_device_add(omap->usb3_phy);
-	if (ret)
-		goto err3;
-
 	return 0;
-
-err3:
-	platform_device_del(omap->usb2_phy);
-
-err2:
-	platform_device_put(omap->usb3_phy);
-
-err1:
-	platform_device_put(omap->usb2_phy);
-
-	return ret;
 }
+EXPORT_SYMBOL_GPL(dwc3_omap_mailbox);
 
 static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 {
@@ -307,24 +252,57 @@ static int dwc3_omap_remove_core(struct device *dev, void *c)
 	return 0;
 }
 
+static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
+{
+	u32			reg;
+
+	/* enable all IRQs */
+	reg = USBOTGSS_IRQO_COREIRQ_ST;
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);
+
+	reg = (USBOTGSS_IRQ1_OEVT |
+			USBOTGSS_IRQ1_DRVVBUS_RISE |
+			USBOTGSS_IRQ1_CHRGVBUS_RISE |
+			USBOTGSS_IRQ1_DISCHRGVBUS_RISE |
+			USBOTGSS_IRQ1_IDPULLUP_RISE |
+			USBOTGSS_IRQ1_DRVVBUS_FALL |
+			USBOTGSS_IRQ1_CHRGVBUS_FALL |
+			USBOTGSS_IRQ1_DISCHRGVBUS_FALL |
+			USBOTGSS_IRQ1_IDPULLUP_FALL);
+
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
+}
+
+static void dwc3_omap_disable_irqs(struct dwc3_omap *omap)
+{
+	/* disable all IRQs */
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, 0x00);
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, 0x00);
+}
+
+static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32);
+
 static int dwc3_omap_probe(struct platform_device *pdev)
 {
-	struct dwc3_omap_data	*pdata = pdev->dev.platform_data;
 	struct device_node	*node = pdev->dev.of_node;
 
 	struct dwc3_omap	*omap;
 	struct resource		*res;
 	struct device		*dev = &pdev->dev;
 
-	int			size;
 	int			ret = -ENOMEM;
 	int			irq;
 
-	const u32		*utmi_mode;
+	int			utmi_mode = 0;
+
 	u32			reg;
 
 	void __iomem		*base;
-	void			*context;
+
+	if (!node) {
+		dev_err(dev, "device node not found\n");
+		return -EINVAL;
+	}
 
 	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
 	if (!omap) {
@@ -334,13 +312,13 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, omap);
 
-	irq = platform_get_irq(pdev, 1);
+	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(dev, "missing IRQ resource\n");
 		return -EINVAL;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "missing memory base resource\n");
 		return -EINVAL;
@@ -352,25 +330,12 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	ret = dwc3_omap_register_phys(omap);
-	if (ret) {
-		dev_err(dev, "couldn't register PHYs\n");
-		return ret;
-	}
-
-	context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL);
-	if (!context) {
-		dev_err(dev, "couldn't allocate dwc3 context memory\n");
-		return -ENOMEM;
-	}
-
 	spin_lock_init(&omap->lock);
 
-	omap->resource_size = resource_size(res);
-	omap->context	= context;
 	omap->dev	= dev;
 	omap->irq	= irq;
 	omap->base	= base;
+	dev->dma_mask	= &dwc3_omap_dma_mask;
 
 	/*
 	 * REVISIT if we ever have two instances of the wrapper, we will be
@@ -387,25 +352,17 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 
-	utmi_mode = of_get_property(node, "utmi-mode", &size);
-	if (utmi_mode && size == sizeof(*utmi_mode)) {
-		reg |= *utmi_mode;
-	} else {
-		if (!pdata) {
-			dev_dbg(dev, "missing platform data\n");
-		} else {
-			switch (pdata->utmi_mode) {
-			case DWC3_OMAP_UTMI_MODE_SW:
-				reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
-				break;
-			case DWC3_OMAP_UTMI_MODE_HW:
-				reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
-				break;
-			default:
-				dev_dbg(dev, "UNKNOWN utmi mode %d\n",
-						pdata->utmi_mode);
-			}
-		}
+	of_property_read_u32(node, "utmi-mode", &utmi_mode);
+
+	switch (utmi_mode) {
+	case DWC3_OMAP_UTMI_MODE_SW:
+		reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+		break;
+	case DWC3_OMAP_UTMI_MODE_HW:
+		reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+		break;
+	default:
+		dev_dbg(dev, "UNKNOWN utmi mode %d\n", utmi_mode);
 	}
 
 	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
@@ -422,29 +379,12 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/* enable all IRQs */
-	reg = USBOTGSS_IRQO_COREIRQ_ST;
-	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);
+	dwc3_omap_enable_irqs(omap);
 
-	reg = (USBOTGSS_IRQ1_OEVT |
-			USBOTGSS_IRQ1_DRVVBUS_RISE |
-			USBOTGSS_IRQ1_CHRGVBUS_RISE |
-			USBOTGSS_IRQ1_DISCHRGVBUS_RISE |
-			USBOTGSS_IRQ1_IDPULLUP_RISE |
-			USBOTGSS_IRQ1_DRVVBUS_FALL |
-			USBOTGSS_IRQ1_CHRGVBUS_FALL |
-			USBOTGSS_IRQ1_DISCHRGVBUS_FALL |
-			USBOTGSS_IRQ1_IDPULLUP_FALL);
-
-	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
-
-	if (node) {
-		ret = of_platform_populate(node, NULL, NULL, dev);
-		if (ret) {
-			dev_err(&pdev->dev,
-				"failed to add create dwc3 core\n");
-			return ret;
-		}
+	ret = of_platform_populate(node, NULL, NULL, dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to create dwc3 core\n");
+		return ret;
 	}
 
 	return 0;
@@ -454,8 +394,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 {
 	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
 
-	platform_device_unregister(omap->usb2_phy);
-	platform_device_unregister(omap->usb3_phy);
+	dwc3_omap_disable_irqs(omap);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
@@ -465,18 +404,72 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 
 static const struct of_device_id of_dwc3_match[] = {
 	{
-		"ti,dwc3",
+		.compatible =	"ti,dwc3"
 	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, of_dwc3_match);
 
+#ifdef CONFIG_PM_SLEEP
+static int dwc3_omap_prepare(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	dwc3_omap_disable_irqs(omap);
+
+	return 0;
+}
+
+static void dwc3_omap_complete(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	dwc3_omap_enable_irqs(omap);
+}
+
+static int dwc3_omap_suspend(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	omap->utmi_otg_status = dwc3_omap_readl(omap->base,
+			USBOTGSS_UTMI_OTG_STATUS);
+
+	return 0;
+}
+
+static int dwc3_omap_resume(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS,
+			omap->utmi_otg_status);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops dwc3_omap_dev_pm_ops = {
+	.prepare	= dwc3_omap_prepare,
+	.complete	= dwc3_omap_complete,
+
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume)
+};
+
+#define DEV_PM_OPS	(&dwc3_omap_dev_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
 static struct platform_driver dwc3_omap_driver = {
 	.probe		= dwc3_omap_probe,
 	.remove		= dwc3_omap_remove,
 	.driver		= {
 		.name	= "omap-dwc3",
 		.of_match_table	= of_dwc3_match,
+		.pm	= DEV_PM_OPS,
 	},
 };
 
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index e8d77689a322..227d4a7acad7 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -212,11 +212,49 @@ static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
 };
 MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
 
+#ifdef CONFIG_PM
+static int dwc3_pci_suspend(struct device *dev)
+{
+	struct pci_dev	*pci = to_pci_dev(dev);
+
+	pci_disable_device(pci);
+
+	return 0;
+}
+
+static int dwc3_pci_resume(struct device *dev)
+{
+	struct pci_dev	*pci = to_pci_dev(dev);
+	int		ret;
+
+	ret = pci_enable_device(pci);
+	if (ret) {
+		dev_err(dev, "can't re-enable device --> %d\n", ret);
+		return ret;
+	}
+
+	pci_set_master(pci);
+
+	return 0;
+}
+
+static const struct dev_pm_ops dwc3_pci_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_suspend, dwc3_pci_resume)
+};
+
+#define DEV_PM_OPS	(&dwc3_pci_dev_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif /* CONFIG_PM */
+
 static struct pci_driver dwc3_pci_driver = {
 	.name		= "dwc3-pci",
 	.id_table	= dwc3_pci_id_table,
 	.probe		= dwc3_pci_probe,
 	.remove		= dwc3_pci_remove,
+	.driver		= {
+		.pm	= DEV_PM_OPS,
+	},
 };
 
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 1d139ca05ef1..5acbb948b704 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -394,10 +394,13 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 	u32			wIndex;
 	u32			reg;
 	int			ret;
+	enum usb_device_state	state;
 
 	wValue = le16_to_cpu(ctrl->wValue);
 	wIndex = le16_to_cpu(ctrl->wIndex);
 	recip = ctrl->bRequestType & USB_RECIP_MASK;
+	state = dwc->gadget.state;
+
 	switch (recip) {
 	case USB_RECIP_DEVICE:
 
@@ -409,7 +412,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 		 * default control pipe
 		 */
 		case USB_DEVICE_U1_ENABLE:
-			if (dwc->dev_state != DWC3_CONFIGURED_STATE)
+			if (state != USB_STATE_CONFIGURED)
 				return -EINVAL;
 			if (dwc->speed != DWC3_DSTS_SUPERSPEED)
 				return -EINVAL;
@@ -423,7 +426,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 			break;
 
 		case USB_DEVICE_U2_ENABLE:
-			if (dwc->dev_state != DWC3_CONFIGURED_STATE)
+			if (state != USB_STATE_CONFIGURED)
 				return -EINVAL;
 			if (dwc->speed != DWC3_DSTS_SUPERSPEED)
 				return -EINVAL;
@@ -493,6 +496,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 
 static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
+	enum usb_device_state state = dwc->gadget.state;
 	u32 addr;
 	u32 reg;
 
@@ -502,7 +506,7 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 		return -EINVAL;
 	}
 
-	if (dwc->dev_state == DWC3_CONFIGURED_STATE) {
+	if (state == USB_STATE_CONFIGURED) {
 		dev_dbg(dwc->dev, "trying to set address when configured\n");
 		return -EINVAL;
 	}
@@ -513,9 +517,9 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
 
 	if (addr)
-		dwc->dev_state = DWC3_ADDRESS_STATE;
+		usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS);
 	else
-		dwc->dev_state = DWC3_DEFAULT_STATE;
+		usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
 
 	return 0;
 }
@@ -532,6 +536,7 @@ static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 
 static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
+	enum usb_device_state state = dwc->gadget.state;
 	u32 cfg;
 	int ret;
 	u32 reg;
@@ -539,16 +544,18 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 	dwc->start_config_issued = false;
 	cfg = le16_to_cpu(ctrl->wValue);
 
-	switch (dwc->dev_state) {
-	case DWC3_DEFAULT_STATE:
+	switch (state) {
+	case USB_STATE_DEFAULT:
 		return -EINVAL;
 		break;
 
-	case DWC3_ADDRESS_STATE:
+	case USB_STATE_ADDRESS:
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		/* if the cfg matches and the cfg is non zero */
 		if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
-			dwc->dev_state = DWC3_CONFIGURED_STATE;
+			usb_gadget_set_state(&dwc->gadget,
+					USB_STATE_CONFIGURED);
+
 			/*
 			 * Enable transition to U1/U2 state when
 			 * nothing is pending from application.
@@ -562,10 +569,11 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 		}
 		break;
 
-	case DWC3_CONFIGURED_STATE:
+	case USB_STATE_CONFIGURED:
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		if (!cfg)
-			dwc->dev_state = DWC3_ADDRESS_STATE;
+			usb_gadget_set_state(&dwc->gadget,
+					USB_STATE_ADDRESS);
 		break;
 	default:
 		ret = -EINVAL;
@@ -620,10 +628,11 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
 static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
 	struct dwc3_ep	*dep;
+	enum usb_device_state state = dwc->gadget.state;
 	u16		wLength;
 	u16		wValue;
 
-	if (dwc->dev_state == DWC3_DEFAULT_STATE)
+	if (state == USB_STATE_DEFAULT)
 		return -EINVAL;
 
 	wValue = le16_to_cpu(ctrl->wValue);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 82e160e96fca..2b6e7e001207 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1425,8 +1425,10 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
 		if (dwc->revision >= DWC3_REVISION_194A)
 			reg &= ~DWC3_DCTL_KEEP_CONNECT;
 		reg |= DWC3_DCTL_RUN_STOP;
+		dwc->pullups_connected = true;
 	} else {
 		reg &= ~DWC3_DCTL_RUN_STOP;
+		dwc->pullups_connected = false;
 	}
 
 	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
@@ -1469,6 +1471,33 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 	return ret;
 }
 
+static void dwc3_gadget_enable_irq(struct dwc3 *dwc)
+{
+	u32			reg;
+
+	/* Enable all but Start and End of Frame IRQs */
+	reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
+			DWC3_DEVTEN_EVNTOVERFLOWEN |
+			DWC3_DEVTEN_CMDCMPLTEN |
+			DWC3_DEVTEN_ERRTICERREN |
+			DWC3_DEVTEN_WKUPEVTEN |
+			DWC3_DEVTEN_ULSTCNGEN |
+			DWC3_DEVTEN_CONNECTDONEEN |
+			DWC3_DEVTEN_USBRSTEN |
+			DWC3_DEVTEN_DISCONNEVTEN);
+
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
+}
+
+static void dwc3_gadget_disable_irq(struct dwc3 *dwc)
+{
+	/* mask all interrupts */
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
+}
+
+static irqreturn_t dwc3_interrupt(int irq, void *_dwc);
+static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc);
+
 static int dwc3_gadget_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver)
 {
@@ -1476,6 +1505,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 	struct dwc3_ep		*dep;
 	unsigned long		flags;
 	int			ret = 0;
+	int			irq;
 	u32			reg;
 
 	spin_lock_irqsave(&dwc->lock, flags);
@@ -1489,7 +1519,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 	}
 
 	dwc->gadget_driver	= driver;
-	dwc->gadget.dev.driver	= &driver->driver;
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 	reg &= ~(DWC3_DCFG_SPEED_MASK);
@@ -1536,6 +1565,17 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 	dwc->ep0state = EP0_SETUP_PHASE;
 	dwc3_ep0_out_start(dwc);
 
+	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
+			IRQF_SHARED | IRQF_ONESHOT, "dwc3", dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
+				irq, ret);
+		goto err1;
+	}
+
+	dwc3_gadget_enable_irq(dwc);
+
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return 0;
@@ -1554,14 +1594,18 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
 	unsigned long		flags;
+	int			irq;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
+	dwc3_gadget_disable_irq(dwc);
+	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+	free_irq(irq, dwc);
+
 	__dwc3_gadget_ep_disable(dwc->eps[0]);
 	__dwc3_gadget_ep_disable(dwc->eps[1]);
 
 	dwc->gadget_driver	= NULL;
-	dwc->gadget.dev.driver	= NULL;
 
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
@@ -1579,14 +1623,15 @@ static const struct usb_gadget_ops dwc3_gadget_ops = {
 
 /* -------------------------------------------------------------------------- */
 
-static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
+static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
+		u8 num, u32 direction)
 {
 	struct dwc3_ep			*dep;
-	u8				epnum;
+	u8				i;
 
-	INIT_LIST_HEAD(&dwc->gadget.ep_list);
+	for (i = 0; i < num; i++) {
+		u8 epnum = (i << 1) | (!!direction);
 
-	for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
 		dep = kzalloc(sizeof(*dep), GFP_KERNEL);
 		if (!dep) {
 			dev_err(dwc->dev, "can't allocate endpoint %d\n",
@@ -1600,6 +1645,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
 
 		snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
 				(epnum & 1) ? "in" : "out");
+
 		dep->endpoint.name = dep->name;
 		dep->direction = (epnum & 1);
 
@@ -1630,6 +1676,27 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
 	return 0;
 }
 
+static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
+{
+	int				ret;
+
+	INIT_LIST_HEAD(&dwc->gadget.ep_list);
+
+	ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0);
+	if (ret < 0) {
+		dev_vdbg(dwc->dev, "failed to allocate OUT endpoints\n");
+		return ret;
+	}
+
+	ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1);
+	if (ret < 0) {
+		dev_vdbg(dwc->dev, "failed to allocate IN endpoints\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
 {
 	struct dwc3_ep			*dep;
@@ -1637,6 +1704,9 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
 
 	for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
 		dep = dwc->eps[epnum];
+		if (!dep)
+			continue;
+
 		dwc3_free_trb_pool(dep);
 
 		if (epnum != 0 && epnum != 1)
@@ -1646,12 +1716,8 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
 	}
 }
 
-static void dwc3_gadget_release(struct device *dev)
-{
-	dev_dbg(dev, "%s\n", __func__);
-}
-
 /* -------------------------------------------------------------------------- */
+
 static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 		struct dwc3_request *req, struct dwc3_trb *trb,
 		const struct dwc3_event_depevt *event, int status)
@@ -1975,6 +2041,9 @@ static void dwc3_stop_active_transfers(struct dwc3 *dwc)
 		struct dwc3_ep *dep;
 
 		dep = dwc->eps[epnum];
+		if (!dep)
+			continue;
+
 		if (!(dep->flags & DWC3_EP_ENABLED))
 			continue;
 
@@ -1992,6 +2061,8 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
 		int ret;
 
 		dep = dwc->eps[epnum];
+		if (!dep)
+			continue;
 
 		if (!(dep->flags & DWC3_EP_STALL))
 			continue;
@@ -2091,7 +2162,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 	}
 
 	/* after reset -> Default State */
-	dwc->dev_state = DWC3_DEFAULT_STATE;
+	usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
 
 	/* Recent versions support automatic phy suspend and don't need this */
 	if (dwc->revision < DWC3_REVISION_194A) {
@@ -2277,6 +2348,34 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 		unsigned int evtinfo)
 {
 	enum dwc3_link_state	next = evtinfo & DWC3_LINK_STATE_MASK;
+	unsigned int		pwropt;
+
+	/*
+	 * WORKAROUND: DWC3 < 2.50a have an issue when configured without
+	 * Hibernation mode enabled which would show up when device detects
+	 * host-initiated U3 exit.
+	 *
+	 * In that case, device will generate a Link State Change Interrupt
+	 * from U3 to RESUME which is only necessary if Hibernation is
+	 * configured in.
+	 *
+	 * There are no functional changes due to such spurious event and we
+	 * just need to ignore it.
+	 *
+	 * Refers to:
+	 *
+	 * STAR#9000570034 RTL: SS Resume event generated in non-Hibernation
+	 * operational mode
+	 */
+	pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
+	if ((dwc->revision < DWC3_REVISION_250A) &&
+			(pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) {
+		if ((dwc->link_state == DWC3_LINK_STATE_U3) &&
+				(next == DWC3_LINK_STATE_RESUME)) {
+			dev_vdbg(dwc->dev, "ignoring transition U3 -> Resume\n");
+			return;
+		}
+	}
 
 	/*
 	 * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
@@ -2387,40 +2486,73 @@ static void dwc3_process_event_entry(struct dwc3 *dwc,
 	}
 }
 
+static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc)
+{
+	struct dwc3 *dwc = _dwc;
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+	int i;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	for (i = 0; i < dwc->num_event_buffers; i++) {
+		struct dwc3_event_buffer *evt;
+		int			left;
+
+		evt = dwc->ev_buffs[i];
+		left = evt->count;
+
+		if (!(evt->flags & DWC3_EVENT_PENDING))
+			continue;
+
+		while (left > 0) {
+			union dwc3_event event;
+
+			event.raw = *(u32 *) (evt->buf + evt->lpos);
+
+			dwc3_process_event_entry(dwc, &event);
+
+			/*
+			 * FIXME we wrap around correctly to the next entry as
+			 * almost all entries are 4 bytes in size. There is one
+			 * entry which has 12 bytes which is a regular entry
+			 * followed by 8 bytes data. ATM I don't know how
+			 * things are organized if we get next to the a
+			 * boundary so I worry about that once we try to handle
+			 * that.
+			 */
+			evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
+			left -= 4;
+
+			dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(i), 4);
+		}
+
+		evt->count = 0;
+		evt->flags &= ~DWC3_EVENT_PENDING;
+		ret = IRQ_HANDLED;
+	}
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
 static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
 {
 	struct dwc3_event_buffer *evt;
-	int left;
 	u32 count;
 
+	evt = dwc->ev_buffs[buf];
+
 	count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
 	count &= DWC3_GEVNTCOUNT_MASK;
 	if (!count)
 		return IRQ_NONE;
 
-	evt = dwc->ev_buffs[buf];
-	left = count;
-
-	while (left > 0) {
-		union dwc3_event event;
-
-		event.raw = *(u32 *) (evt->buf + evt->lpos);
+	evt->count = count;
+	evt->flags |= DWC3_EVENT_PENDING;
 
-		dwc3_process_event_entry(dwc, &event);
-		/*
-		 * XXX we wrap around correctly to the next entry as almost all
-		 * entries are 4 bytes in size. There is one entry which has 12
-		 * bytes which is a regular entry followed by 8 bytes data. ATM
-		 * I don't know how things are organized if were get next to the
-		 * a boundary so I worry about that once we try to handle that.
-		 */
-		evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
-		left -= 4;
-
-		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
-	}
-
-	return IRQ_HANDLED;
+	return IRQ_WAKE_THREAD;
 }
 
 static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
@@ -2435,7 +2567,7 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
 		irqreturn_t status;
 
 		status = dwc3_process_event_buf(dwc, i);
-		if (status == IRQ_HANDLED)
+		if (status == IRQ_WAKE_THREAD)
 			ret = status;
 	}
 
@@ -2454,7 +2586,6 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 {
 	u32					reg;
 	int					ret;
-	int					irq;
 
 	dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
 			&dwc->ctrl_req_addr, GFP_KERNEL);
@@ -2488,19 +2619,10 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 		goto err3;
 	}
 
-	dev_set_name(&dwc->gadget.dev, "gadget");
-
 	dwc->gadget.ops			= &dwc3_gadget_ops;
 	dwc->gadget.max_speed		= USB_SPEED_SUPER;
 	dwc->gadget.speed		= USB_SPEED_UNKNOWN;
-	dwc->gadget.dev.parent		= dwc->dev;
 	dwc->gadget.sg_supported	= true;
-
-	dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask);
-
-	dwc->gadget.dev.dma_parms	= dwc->dev->dma_parms;
-	dwc->gadget.dev.dma_mask	= dwc->dev->dma_mask;
-	dwc->gadget.dev.release		= dwc3_gadget_release;
 	dwc->gadget.name		= "dwc3-gadget";
 
 	/*
@@ -2512,60 +2634,24 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	if (ret)
 		goto err4;
 
-	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
-
-	ret = request_irq(irq, dwc3_interrupt, IRQF_SHARED,
-			"dwc3", dwc);
-	if (ret) {
-		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
-				irq, ret);
-		goto err5;
-	}
-
 	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 	reg |= DWC3_DCFG_LPM_CAP;
 	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
 
-	/* Enable all but Start and End of Frame IRQs */
-	reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
-			DWC3_DEVTEN_EVNTOVERFLOWEN |
-			DWC3_DEVTEN_CMDCMPLTEN |
-			DWC3_DEVTEN_ERRTICERREN |
-			DWC3_DEVTEN_WKUPEVTEN |
-			DWC3_DEVTEN_ULSTCNGEN |
-			DWC3_DEVTEN_CONNECTDONEEN |
-			DWC3_DEVTEN_USBRSTEN |
-			DWC3_DEVTEN_DISCONNEVTEN);
-	dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
-
-	/* automatic phy suspend only on recent versions */
+	/* Enable USB2 LPM and automatic phy suspend only on recent versions */
 	if (dwc->revision >= DWC3_REVISION_194A) {
 		dwc3_gadget_usb2_phy_suspend(dwc, false);
 		dwc3_gadget_usb3_phy_suspend(dwc, false);
 	}
 
-	ret = device_register(&dwc->gadget.dev);
-	if (ret) {
-		dev_err(dwc->dev, "failed to register gadget device\n");
-		put_device(&dwc->gadget.dev);
-		goto err6;
-	}
-
 	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register udc\n");
-		goto err7;
+		goto err5;
 	}
 
 	return 0;
 
-err7:
-	device_unregister(&dwc->gadget.dev);
-
-err6:
-	dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
-	free_irq(irq, dwc);
-
 err5:
 	dwc3_gadget_free_endpoints(dwc);
 
@@ -2588,15 +2674,11 @@ err0:
 	return ret;
 }
 
+/* -------------------------------------------------------------------------- */
+
 void dwc3_gadget_exit(struct dwc3 *dwc)
 {
-	int			irq;
-
 	usb_del_gadget_udc(&dwc->gadget);
-	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
-
-	dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
-	free_irq(irq, dwc);
 
 	dwc3_gadget_free_endpoints(dwc);
 
@@ -2610,6 +2692,63 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 
 	dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
 			dwc->ctrl_req, dwc->ctrl_req_addr);
+}
 
-	device_unregister(&dwc->gadget.dev);
+int dwc3_gadget_prepare(struct dwc3 *dwc)
+{
+	if (dwc->pullups_connected)
+		dwc3_gadget_disable_irq(dwc);
+
+	return 0;
+}
+
+void dwc3_gadget_complete(struct dwc3 *dwc)
+{
+	if (dwc->pullups_connected) {
+		dwc3_gadget_enable_irq(dwc);
+		dwc3_gadget_run_stop(dwc, true);
+	}
+}
+
+int dwc3_gadget_suspend(struct dwc3 *dwc)
+{
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+	__dwc3_gadget_ep_disable(dwc->eps[1]);
+
+	dwc->dcfg = dwc3_readl(dwc->regs, DWC3_DCFG);
+
+	return 0;
+}
+
+int dwc3_gadget_resume(struct dwc3 *dwc)
+{
+	struct dwc3_ep		*dep;
+	int			ret;
+
+	/* Start with SuperSpeed Default */
+	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+
+	dep = dwc->eps[0];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	if (ret)
+		goto err0;
+
+	dep = dwc->eps[1];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	if (ret)
+		goto err1;
+
+	/* begin to receive SETUP packets */
+	dwc->ep0state = EP0_SETUP_PHASE;
+	dwc3_ep0_out_start(dwc);
+
+	dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg);
+
+	return 0;
+
+err1:
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+
+err0:
+	return ret;
 }
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index c7525b1cad74..a61d981cbd15 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -196,7 +196,6 @@ config USB_OMAP
 	tristate "OMAP USB Device Controller"
 	depends on ARCH_OMAP1
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
-	select USB_OTG_UTILS if ARCH_OMAP
 	help
 	   Many Texas Instruments OMAP processors have flexible full
 	   speed USB device controllers, with support for up to 30
@@ -211,7 +210,6 @@ config USB_OMAP
 config USB_PXA25X
 	tristate "PXA 25x or IXP 4xx"
 	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
-	select USB_OTG_UTILS
 	help
 	   Intel's PXA 25x series XScale ARM-5TE processors include
 	   an integrated full speed USB 1.1 device controller.  The
@@ -259,8 +257,6 @@ config USB_RENESAS_USBHS_UDC
 
 config USB_PXA27X
 	tristate "PXA 27x"
-	depends on ARCH_PXA && (PXA27x || PXA3xx)
-	select USB_OTG_UTILS
 	help
 	   Intel's PXA 27x series XScale ARM v5TE processors include
 	   an integrated full speed USB 1.1 device controller.
@@ -329,9 +325,6 @@ config USB_MV_UDC
 
 config USB_MV_U3D
 	tristate "MARVELL PXA2128 USB 3.0 controller"
-	depends on CPU_MMP3
-	select USB_GADGET_DUALSPEED
-	select USB_GADGET_SUPERSPEED
 	help
 	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
 	  controller, which support super speed USB peripheral.
@@ -501,6 +494,7 @@ endmenu
 # composite based drivers
 config USB_LIBCOMPOSITE
 	tristate
+	select CONFIGFS_FS
 	depends on USB_GADGET
 
 config USB_F_ACM
@@ -512,6 +506,12 @@ config USB_F_SS_LB
 config USB_U_SERIAL
 	tristate
 
+config USB_F_SERIAL
+	tristate
+
+config USB_F_OBEX
+	tristate
+
 choice
 	tristate "USB Gadget Drivers"
 	default USB_ETH
@@ -766,6 +766,8 @@ config USB_G_SERIAL
 	depends on TTY
 	select USB_U_SERIAL
 	select USB_F_ACM
+	select USB_F_SERIAL
+	select USB_F_OBEX
 	select USB_LIBCOMPOSITE
 	help
 	  The Serial Gadget talks to the Linux-USB generic serial driver.
@@ -839,6 +841,7 @@ config USB_G_NOKIA
 	depends on PHONET
 	select USB_LIBCOMPOSITE
 	select USB_U_SERIAL
+	select USB_F_ACM
 	help
 	  The Nokia composite gadget provides support for acm, obex
 	  and phonet in only one composite gadget driver.
@@ -957,6 +960,7 @@ config USB_G_WEBCAM
 	tristate "USB Webcam Gadget"
 	depends on VIDEO_DEV
 	select USB_LIBCOMPOSITE
+	select VIDEOBUF2_VMALLOC
 	help
 	  The Webcam Gadget acts as a composite USB Audio and Video Class
 	  device. It provides a userspace API to process UVC control requests
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 82fb22511356..6afd16659e78 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -6,7 +6,7 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
 libcomposite-y			:= usbstring.o config.o epautoconf.o
-libcomposite-y			+= composite.o functions.o
+libcomposite-y			+= composite.o functions.o configfs.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
@@ -36,10 +36,15 @@ obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
 
 # USB Functions
-obj-$(CONFIG_USB_F_ACM)		+= f_acm.o
-f_ss_lb-y			:= f_loopback.o f_sourcesink.o
-obj-$(CONFIG_USB_F_SS_LB)	+= f_ss_lb.o
+usb_f_acm-y			:= f_acm.o
+obj-$(CONFIG_USB_F_ACM)		+= usb_f_acm.o
+usb_f_ss_lb-y			:= f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB)	+= usb_f_ss_lb.o
 obj-$(CONFIG_USB_U_SERIAL)	+= u_serial.o
+usb_f_serial-y			:= f_serial.o
+obj-$(CONFIG_USB_F_SERIAL)	+= usb_f_serial.o
+usb_f_obex-y			:= f_obex.o
+obj-$(CONFIG_USB_F_OBEX)	+= usb_f_obex.o
 
 #
 # USB gadget drivers
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 8f2b0e391534..4b947bb50f62 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -109,7 +109,6 @@ FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
 static struct fsg_common fsg_common;
 
 /*-------------------------------------------------------------------------*/
-static unsigned char tty_line;
 static struct usb_function *f_acm;
 static struct usb_function_instance *f_acm_inst;
 /*
@@ -117,7 +116,6 @@ static struct usb_function_instance *f_acm_inst;
  */
 static int __init acm_ms_do_config(struct usb_configuration *c)
 {
-	struct f_serial_opts *opts;
 	int	status;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -129,9 +127,6 @@ static int __init acm_ms_do_config(struct usb_configuration *c)
 	if (IS_ERR(f_acm_inst))
 		return PTR_ERR(f_acm_inst);
 
-	opts = container_of(f_acm_inst, struct f_serial_opts, func_inst);
-	opts->port_num = tty_line;
-
 	f_acm = usb_get_function(f_acm_inst);
 	if (IS_ERR(f_acm)) {
 		status = PTR_ERR(f_acm);
@@ -171,16 +166,11 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 	int			status;
 	void			*retp;
 
-	/* set up serial link layer */
-	status = gserial_alloc_line(&tty_line);
-	if (status < 0)
-		return status;
-
 	/* set up mass storage function */
 	retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
 	if (IS_ERR(retp)) {
 		status = PTR_ERR(retp);
-		goto fail0;
+		return PTR_ERR(retp);
 	}
 
 	/*
@@ -207,8 +197,6 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 	/* error recovery */
 fail1:
 	fsg_common_put(&fsg_common);
-fail0:
-	gserial_free_line(tty_line);
 	return status;
 }
 
@@ -216,7 +204,6 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
 {
 	usb_put_function(f_acm);
 	usb_put_function_instance(f_acm_inst);
-	gserial_free_line(tty_line);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 75973f33a4c8..f52dcfe8f545 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1922,7 +1922,6 @@ static int amd5536_udc_start(struct usb_gadget *g,
 
 	driver->driver.bus = NULL;
 	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
 
 	/* Some gadget drivers use both ep0 directions.
 	 * NOTE: to gadget driver, ep0 is just one endpoint...
@@ -1973,7 +1972,6 @@ static int amd5536_udc_stop(struct usb_gadget *g,
 	shutdown(dev, driver);
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
 	/* set SD */
@@ -3080,7 +3078,6 @@ static void udc_pci_remove(struct pci_dev *pdev)
 	if (dev->active)
 		pci_disable_device(pdev);
 
-	device_unregister(&dev->gadget.dev);
 	pci_set_drvdata(pdev, NULL);
 
 	udc_remove(dev);
@@ -3245,8 +3242,6 @@ static int udc_pci_probe(
 	dev->phys_addr = resource;
 	dev->irq = pdev->irq;
 	dev->pdev = pdev;
-	dev->gadget.dev.parent = &pdev->dev;
-	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
 
 	/* general probing */
 	if (udc_probe(dev) == 0)
@@ -3273,7 +3268,6 @@ static int udc_probe(struct udc *dev)
 	dev->gadget.ops = &udc_ops;
 
 	dev_set_name(&dev->gadget.dev, "gadget");
-	dev->gadget.dev.release = gadget_release;
 	dev->gadget.name = name;
 	dev->gadget.max_speed = USB_SPEED_HIGH;
 
@@ -3297,17 +3291,11 @@ static int udc_probe(struct udc *dev)
 		"driver version: %s(for Geode5536 B1)\n", tmp);
 	udc = dev;
 
-	retval = usb_add_gadget_udc(&udc->pdev->dev, &dev->gadget);
+	retval = usb_add_gadget_udc_release(&udc->pdev->dev, &dev->gadget,
+			gadget_release);
 	if (retval)
 		goto finished;
 
-	retval = device_register(&dev->gadget.dev);
-	if (retval) {
-		usb_del_gadget_udc(&dev->gadget);
-		put_device(&dev->gadget.dev);
-		goto finished;
-	}
-
 	/* timer init */
 	init_timer(&udc_timer);
 	udc_timer.function = udc_timer_function;
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index f1bf32e6b8d8..6744d3b83109 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -472,7 +472,6 @@ struct udc_request {
 
 	/* flags */
 	unsigned			dma_going : 1,
-					dma_mapping : 1,
 					dma_done : 1;
 	/* phys. address */
 	dma_addr_t			td_phys;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 45dd2929a671..a690d64217f4 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1631,7 +1631,6 @@ static int at91_start(struct usb_gadget *gadget,
 
 	udc = container_of(gadget, struct at91_udc, gadget);
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 	udc->gadget.dev.of_node = udc->pdev->dev.of_node;
 	udc->enabled = 1;
 	udc->selfpowered = 1;
@@ -1652,7 +1651,6 @@ static int at91_stop(struct usb_gadget *gadget,
 	at91_udp_write(udc, AT91_UDP_IDR, ~0);
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
 	DBG("unbound from %s\n", driver->driver.name);
@@ -1780,13 +1778,7 @@ static int at91udc_probe(struct platform_device *pdev)
 		DBG("clocks missing\n");
 		retval = -ENODEV;
 		/* NOTE: we "know" here that refcounts on these are NOPs */
-		goto fail0b;
-	}
-
-	retval = device_register(&udc->gadget.dev);
-	if (retval < 0) {
-		put_device(&udc->gadget.dev);
-		goto fail0b;
+		goto fail1;
 	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
@@ -1857,8 +1849,6 @@ fail3:
 fail2:
 	free_irq(udc->udp_irq, udc);
 fail1:
-	device_unregister(&udc->gadget.dev);
-fail0b:
 	iounmap(udc->udp_baseaddr);
 fail0a:
 	if (cpu_is_at91rm9200())
@@ -1892,8 +1882,6 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 		gpio_free(udc->board.vbus_pin);
 	}
 	free_irq(udc->udp_irq, udc);
-	device_unregister(&udc->gadget.dev);
-
 	iounmap(udc->udp_baseaddr);
 
 	if (cpu_is_at91rm9200())
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index b66130c97269..f2a970f75bfa 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -489,13 +489,8 @@ request_complete(struct usba_ep *ep, struct usba_request *req, int status)
 	if (req->req.status == -EINPROGRESS)
 		req->req.status = status;
 
-	if (req->mapped) {
-		dma_unmap_single(
-			&udc->pdev->dev, req->req.dma, req->req.length,
-			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		req->req.dma = DMA_ADDR_INVALID;
-		req->mapped = 0;
-	}
+	if (req->using_dma)
+		usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in);
 
 	DBG(DBG_GADGET | DBG_REQ,
 		"%s: req %p complete: status %d, actual %u\n",
@@ -684,7 +679,6 @@ usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 		return NULL;
 
 	INIT_LIST_HEAD(&req->queue);
-	req->req.dma = DMA_ADDR_INVALID;
 
 	return &req->req;
 }
@@ -717,20 +711,11 @@ static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
 		return -EINVAL;
 	}
 
-	req->using_dma = 1;
-
-	if (req->req.dma == DMA_ADDR_INVALID) {
-		req->req.dma = dma_map_single(
-			&udc->pdev->dev, req->req.buf, req->req.length,
-			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		req->mapped = 1;
-	} else {
-		dma_sync_single_for_device(
-			&udc->pdev->dev, req->req.dma, req->req.length,
-			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		req->mapped = 0;
-	}
+	ret = usb_gadget_map_request(&udc->gadget, &req->req, ep->is_in);
+	if (ret)
+		return ret;
 
+	req->using_dma = 1;
 	req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
 			| USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
 			| USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
@@ -1799,7 +1784,6 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 
 	udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	clk_enable(udc->pclk);
@@ -1841,7 +1825,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget,
 	toggle_bias(0);
 	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
 
-	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
 	clk_disable(udc->hclk);
@@ -1900,10 +1883,6 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
 		 (unsigned long)fifo->start, udc->fifo);
 
-	device_initialize(&udc->gadget.dev);
-	udc->gadget.dev.parent = &pdev->dev;
-	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-
 	platform_set_drvdata(pdev, udc);
 
 	/* Make sure we start from a clean slate */
@@ -1962,12 +1941,6 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	}
 	udc->irq = irq;
 
-	ret = device_add(&udc->gadget.dev);
-	if (ret) {
-		dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
-		goto err_device_add;
-	}
-
 	if (gpio_is_valid(pdata->vbus_pin)) {
 		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
 			udc->vbus_pin = pdata->vbus_pin;
@@ -2007,9 +1980,6 @@ err_add_udc:
 		gpio_free(udc->vbus_pin);
 	}
 
-	device_unregister(&udc->gadget.dev);
-
-err_device_add:
 	free_irq(irq, udc);
 err_request_irq:
 	kfree(usba_ep);
@@ -2053,8 +2023,6 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 	clk_put(udc->hclk);
 	clk_put(udc->pclk);
 
-	device_unregister(&udc->gadget.dev);
-
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index 9791259cbda7..d65a61851d3d 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -216,12 +216,6 @@
 #define EP0_EPT_SIZE		USBA_EPT_SIZE_64
 #define EP0_NR_BANKS		1
 
-/*
- * REVISIT: Try to eliminate this value. Can we rely on req->mapped to
- * provide this information?
- */
-#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-
 #define FIFO_IOMEM_ID	0
 #define CTRL_IOMEM_ID	1
 
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
index 8cc8253f1100..6e6518264c42 100644
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -1819,7 +1819,6 @@ static int bcm63xx_udc_start(struct usb_gadget *gadget,
 
 	udc->driver = driver;
 	driver->driver.bus = NULL;
-	udc->gadget.dev.driver = &driver->driver;
 	udc->gadget.dev.of_node = udc->dev->of_node;
 
 	spin_unlock_irqrestore(&udc->lock, flags);
@@ -1841,7 +1840,6 @@ static int bcm63xx_udc_stop(struct usb_gadget *gadget,
 	spin_lock_irqsave(&udc->lock, flags);
 
 	udc->driver = NULL;
-	udc->gadget.dev.driver = NULL;
 
 	/*
 	 * If we switch the PHY too abruptly after dropping D+, the host
@@ -2306,17 +2304,6 @@ static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc)
  ***********************************************************************/
 
 /**
- * bcm63xx_udc_gadget_release - Called from device_release().
- * @dev: Unused.
- *
- * We get a warning if this function doesn't exist, but it's empty because
- * we don't have to free any of the memory allocated with the devm_* APIs.
- */
-static void bcm63xx_udc_gadget_release(struct device *dev)
-{
-}
-
-/**
  * bcm63xx_udc_probe - Initialize a new instance of the UDC.
  * @pdev: Platform device struct from the bcm63xx BSP code.
  *
@@ -2368,13 +2355,9 @@ static int bcm63xx_udc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&udc->lock);
 	INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process);
-	dev_set_name(&udc->gadget.dev, "gadget");
 
 	udc->gadget.ops = &bcm63xx_udc_ops;
 	udc->gadget.name = dev_name(dev);
-	udc->gadget.dev.parent = dev;
-	udc->gadget.dev.release = bcm63xx_udc_gadget_release;
-	udc->gadget.dev.dma_mask = dev->dma_mask;
 
 	if (!pd->use_fullspeed && !use_fullspeed)
 		udc->gadget.max_speed = USB_SPEED_HIGH;
@@ -2414,17 +2397,12 @@ static int bcm63xx_udc_probe(struct platform_device *pdev)
 		}
 	}
 
-	rc = device_register(&udc->gadget.dev);
-	if (rc)
-		goto out_uninit;
-
 	bcm63xx_udc_init_debugfs(udc);
 	rc = usb_add_gadget_udc(dev, &udc->gadget);
 	if (!rc)
 		return 0;
 
 	bcm63xx_udc_cleanup_debugfs(udc);
-	device_unregister(&udc->gadget.dev);
 out_uninit:
 	bcm63xx_uninit_udc_hw(udc);
 	return rc;
@@ -2440,7 +2418,6 @@ static int bcm63xx_udc_remove(struct platform_device *pdev)
 
 	bcm63xx_udc_cleanup_debugfs(udc);
 	usb_del_gadget_udc(&udc->gadget);
-	device_unregister(&udc->gadget.dev);
 	BUG_ON(udc->driver);
 
 	platform_set_drvdata(pdev, NULL);
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index a7d6f7026757..c6ee6f1558c3 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -103,18 +103,16 @@ static struct usb_gadget_strings *dev_strings[] = {
 };
 
 static u8 hostaddr[ETH_ALEN];
-
+static struct eth_dev *the_dev;
 /*-------------------------------------------------------------------------*/
 static struct usb_function *f_acm;
 static struct usb_function_instance *fi_serial;
 
-static unsigned char tty_line;
 /*
  * We _always_ have both CDC ECM and CDC ACM functions.
  */
 static int __init cdc_do_config(struct usb_configuration *c)
 {
-	struct f_serial_opts *opts;
 	int	status;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -122,7 +120,7 @@ static int __init cdc_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	status = ecm_bind_config(c, hostaddr);
+	status = ecm_bind_config(c, hostaddr, the_dev);
 	if (status < 0)
 		return status;
 
@@ -130,9 +128,6 @@ static int __init cdc_do_config(struct usb_configuration *c)
 	if (IS_ERR(fi_serial))
 		return PTR_ERR(fi_serial);
 
-	opts = container_of(fi_serial, struct f_serial_opts, func_inst);
-	opts->port_num = tty_line;
-
 	f_acm = usb_get_function(fi_serial);
 	if (IS_ERR(f_acm))
 		goto err_func_acm;
@@ -169,14 +164,9 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 	}
 
 	/* set up network link layer */
-	status = gether_setup(cdev->gadget, hostaddr);
-	if (status < 0)
-		return status;
-
-	/* set up serial link layer */
-	status = gserial_alloc_line(&tty_line);
-	if (status < 0)
-		goto fail0;
+	the_dev = gether_setup(cdev->gadget, hostaddr);
+	if (IS_ERR(the_dev))
+		return PTR_ERR(the_dev);
 
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
@@ -200,9 +190,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 	return 0;
 
 fail1:
-	gserial_free_line(tty_line);
-fail0:
-	gether_cleanup();
+	gether_cleanup(the_dev);
 	return status;
 }
 
@@ -210,8 +198,7 @@ static int __exit cdc_unbind(struct usb_composite_dev *cdev)
 {
 	usb_put_function(f_acm);
 	usb_put_function_instance(fi_serial);
-	gserial_free_line(tty_line);
-	gether_cleanup();
+	gether_cleanup(the_dev);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c0d62b278610..55f4df60f327 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1637,6 +1637,7 @@ void composite_dev_cleanup(struct usb_composite_dev *cdev)
 		kfree(cdev->req->buf);
 		usb_ep_free_request(cdev->gadget->ep0, cdev->req);
 	}
+	cdev->next_string_id = 0;
 	device_remove_file(&cdev->gadget->dev, &dev_attr_suspended);
 }
 
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
new file mode 100644
index 000000000000..a34633a898a1
--- /dev/null
+++ b/drivers/usb/gadget/configfs.c
@@ -0,0 +1,1003 @@
+#include <linux/configfs.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget_configfs.h>
+
+int check_user_usb_string(const char *name,
+		struct usb_gadget_strings *stringtab_dev)
+{
+	unsigned primary_lang;
+	unsigned sub_lang;
+	u16 num;
+	int ret;
+
+	ret = kstrtou16(name, 0, &num);
+	if (ret)
+		return ret;
+
+	primary_lang = num & 0x3ff;
+	sub_lang = num >> 10;
+
+	/* simple sanity check for valid langid */
+	switch (primary_lang) {
+	case 0:
+	case 0x62 ... 0xfe:
+	case 0x100 ... 0x3ff:
+		return -EINVAL;
+	}
+	if (!sub_lang)
+		return -EINVAL;
+
+	stringtab_dev->language = num;
+	return 0;
+}
+
+#define MAX_NAME_LEN	40
+#define MAX_USB_STRING_LANGS 2
+
+struct gadget_info {
+	struct config_group group;
+	struct config_group functions_group;
+	struct config_group configs_group;
+	struct config_group strings_group;
+	struct config_group *default_groups[4];
+
+	struct mutex lock;
+	struct usb_gadget_strings *gstrings[MAX_USB_STRING_LANGS + 1];
+	struct list_head string_list;
+	struct list_head available_func;
+
+	const char *udc_name;
+#ifdef CONFIG_USB_OTG
+	struct usb_otg_descriptor otg;
+#endif
+	struct usb_composite_driver composite;
+	struct usb_composite_dev cdev;
+};
+
+struct config_usb_cfg {
+	struct config_group group;
+	struct config_group strings_group;
+	struct config_group *default_groups[2];
+	struct list_head string_list;
+	struct usb_configuration c;
+	struct list_head func_list;
+	struct usb_gadget_strings *gstrings[MAX_USB_STRING_LANGS + 1];
+};
+
+struct gadget_strings {
+	struct usb_gadget_strings stringtab_dev;
+	struct usb_string strings[USB_GADGET_FIRST_AVAIL_IDX];
+	char *manufacturer;
+	char *product;
+	char *serialnumber;
+
+	struct config_group group;
+	struct list_head list;
+};
+
+struct gadget_config_name {
+	struct usb_gadget_strings stringtab_dev;
+	struct usb_string strings;
+	char *configuration;
+
+	struct config_group group;
+	struct list_head list;
+};
+
+static int usb_string_copy(const char *s, char **s_copy)
+{
+	int ret;
+	char *str;
+	char *copy = *s_copy;
+	ret = strlen(s);
+	if (ret > 126)
+		return -EOVERFLOW;
+
+	str = kstrdup(s, GFP_KERNEL);
+	if (!str)
+		return -ENOMEM;
+	if (str[ret - 1] == '\n')
+		str[ret - 1] = '\0';
+	kfree(copy);
+	*s_copy = str;
+	return 0;
+}
+
+CONFIGFS_ATTR_STRUCT(gadget_info);
+CONFIGFS_ATTR_STRUCT(config_usb_cfg);
+
+#define GI_DEVICE_DESC_ITEM_ATTR(name)	\
+	static struct gadget_info_attribute gadget_cdev_desc_##name = \
+		__CONFIGFS_ATTR(name,  S_IRUGO | S_IWUSR,		\
+				gadget_dev_desc_##name##_show,		\
+				gadget_dev_desc_##name##_store)
+
+#define GI_DEVICE_DESC_SIMPLE_R_u8(__name)	\
+	static ssize_t gadget_dev_desc_##__name##_show(struct gadget_info *gi, \
+			char *page)	\
+{	\
+	return sprintf(page, "0x%02x\n", gi->cdev.desc.__name);	\
+}
+
+#define GI_DEVICE_DESC_SIMPLE_R_u16(__name)	\
+	static ssize_t gadget_dev_desc_##__name##_show(struct gadget_info *gi, \
+			char *page)	\
+{	\
+	return sprintf(page, "0x%04x\n", le16_to_cpup(&gi->cdev.desc.__name)); \
+}
+
+
+#define GI_DEVICE_DESC_SIMPLE_W_u8(_name)		\
+	static ssize_t gadget_dev_desc_##_name##_store(struct gadget_info *gi, \
+		const char *page, size_t len)		\
+{							\
+	u8 val;						\
+	int ret;					\
+	ret = kstrtou8(page, 0, &val);			\
+	if (ret)					\
+		return ret;				\
+	gi->cdev.desc._name = val;			\
+	return len;					\
+}
+
+#define GI_DEVICE_DESC_SIMPLE_W_u16(_name)	\
+	static ssize_t gadget_dev_desc_##_name##_store(struct gadget_info *gi, \
+		const char *page, size_t len)		\
+{							\
+	u16 val;					\
+	int ret;					\
+	ret = kstrtou16(page, 0, &val);			\
+	if (ret)					\
+		return ret;				\
+	gi->cdev.desc._name = cpu_to_le16p(&val);	\
+	return len;					\
+}
+
+#define GI_DEVICE_DESC_SIMPLE_RW(_name, _type)	\
+	GI_DEVICE_DESC_SIMPLE_R_##_type(_name)	\
+	GI_DEVICE_DESC_SIMPLE_W_##_type(_name)
+
+GI_DEVICE_DESC_SIMPLE_R_u16(bcdUSB);
+GI_DEVICE_DESC_SIMPLE_RW(bDeviceClass, u8);
+GI_DEVICE_DESC_SIMPLE_RW(bDeviceSubClass, u8);
+GI_DEVICE_DESC_SIMPLE_RW(bDeviceProtocol, u8);
+GI_DEVICE_DESC_SIMPLE_RW(bMaxPacketSize0, u8);
+GI_DEVICE_DESC_SIMPLE_RW(idVendor, u16);
+GI_DEVICE_DESC_SIMPLE_RW(idProduct, u16);
+GI_DEVICE_DESC_SIMPLE_R_u16(bcdDevice);
+
+static ssize_t is_valid_bcd(u16 bcd_val)
+{
+	if ((bcd_val & 0xf) > 9)
+		return -EINVAL;
+	if (((bcd_val >> 4) & 0xf) > 9)
+		return -EINVAL;
+	if (((bcd_val >> 8) & 0xf) > 9)
+		return -EINVAL;
+	if (((bcd_val >> 12) & 0xf) > 9)
+		return -EINVAL;
+	return 0;
+}
+
+static ssize_t gadget_dev_desc_bcdDevice_store(struct gadget_info *gi,
+		const char *page, size_t len)
+{
+	u16 bcdDevice;
+	int ret;
+
+	ret = kstrtou16(page, 0, &bcdDevice);
+	if (ret)
+		return ret;
+	ret = is_valid_bcd(bcdDevice);
+	if (ret)
+		return ret;
+
+	gi->cdev.desc.bcdDevice = cpu_to_le16(bcdDevice);
+	return len;
+}
+
+static ssize_t gadget_dev_desc_bcdUSB_store(struct gadget_info *gi,
+		const char *page, size_t len)
+{
+	u16 bcdUSB;
+	int ret;
+
+	ret = kstrtou16(page, 0, &bcdUSB);
+	if (ret)
+		return ret;
+	ret = is_valid_bcd(bcdUSB);
+	if (ret)
+		return ret;
+
+	gi->cdev.desc.bcdUSB = cpu_to_le16(bcdUSB);
+	return len;
+}
+
+static ssize_t gadget_dev_desc_UDC_show(struct gadget_info *gi, char *page)
+{
+	return sprintf(page, "%s\n", gi->udc_name ?: "");
+}
+
+static int unregister_gadget(struct gadget_info *gi)
+{
+	int ret;
+
+	if (!gi->udc_name)
+		return -ENODEV;
+
+	ret = usb_gadget_unregister_driver(&gi->composite.gadget_driver);
+	if (ret)
+		return ret;
+	kfree(gi->udc_name);
+	gi->udc_name = NULL;
+	return 0;
+}
+
+static ssize_t gadget_dev_desc_UDC_store(struct gadget_info *gi,
+		const char *page, size_t len)
+{
+	char *name;
+	int ret;
+
+	name = kstrdup(page, GFP_KERNEL);
+	if (!name)
+		return -ENOMEM;
+	if (name[len - 1] == '\n')
+		name[len - 1] = '\0';
+
+	mutex_lock(&gi->lock);
+
+	if (!strlen(name)) {
+		ret = unregister_gadget(gi);
+		if (ret)
+			goto err;
+	} else {
+		if (gi->udc_name) {
+			ret = -EBUSY;
+			goto err;
+		}
+		ret = udc_attach_driver(name, &gi->composite.gadget_driver);
+		if (ret)
+			goto err;
+		gi->udc_name = name;
+	}
+	mutex_unlock(&gi->lock);
+	return len;
+err:
+	kfree(name);
+	mutex_unlock(&gi->lock);
+	return ret;
+}
+
+GI_DEVICE_DESC_ITEM_ATTR(bDeviceClass);
+GI_DEVICE_DESC_ITEM_ATTR(bDeviceSubClass);
+GI_DEVICE_DESC_ITEM_ATTR(bDeviceProtocol);
+GI_DEVICE_DESC_ITEM_ATTR(bMaxPacketSize0);
+GI_DEVICE_DESC_ITEM_ATTR(idVendor);
+GI_DEVICE_DESC_ITEM_ATTR(idProduct);
+GI_DEVICE_DESC_ITEM_ATTR(bcdDevice);
+GI_DEVICE_DESC_ITEM_ATTR(bcdUSB);
+GI_DEVICE_DESC_ITEM_ATTR(UDC);
+
+static struct configfs_attribute *gadget_root_attrs[] = {
+	&gadget_cdev_desc_bDeviceClass.attr,
+	&gadget_cdev_desc_bDeviceSubClass.attr,
+	&gadget_cdev_desc_bDeviceProtocol.attr,
+	&gadget_cdev_desc_bMaxPacketSize0.attr,
+	&gadget_cdev_desc_idVendor.attr,
+	&gadget_cdev_desc_idProduct.attr,
+	&gadget_cdev_desc_bcdDevice.attr,
+	&gadget_cdev_desc_bcdUSB.attr,
+	&gadget_cdev_desc_UDC.attr,
+	NULL,
+};
+
+static inline struct gadget_info *to_gadget_info(struct config_item *item)
+{
+	 return container_of(to_config_group(item), struct gadget_info, group);
+}
+
+static inline struct gadget_strings *to_gadget_strings(struct config_item *item)
+{
+	 return container_of(to_config_group(item), struct gadget_strings,
+			 group);
+}
+
+static inline struct gadget_config_name *to_gadget_config_name(
+		struct config_item *item)
+{
+	 return container_of(to_config_group(item), struct gadget_config_name,
+			 group);
+}
+
+static inline struct config_usb_cfg *to_config_usb_cfg(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct config_usb_cfg,
+			group);
+}
+
+static inline struct usb_function_instance *to_usb_function_instance(
+		struct config_item *item)
+{
+	 return container_of(to_config_group(item),
+			 struct usb_function_instance, group);
+}
+
+static void gadget_info_attr_release(struct config_item *item)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+
+	WARN_ON(!list_empty(&gi->cdev.configs));
+	WARN_ON(!list_empty(&gi->string_list));
+	WARN_ON(!list_empty(&gi->available_func));
+	kfree(gi->composite.gadget_driver.function);
+	kfree(gi);
+}
+
+CONFIGFS_ATTR_OPS(gadget_info);
+
+static struct configfs_item_operations gadget_root_item_ops = {
+	.release                = gadget_info_attr_release,
+	.show_attribute         = gadget_info_attr_show,
+	.store_attribute        = gadget_info_attr_store,
+};
+
+static void gadget_config_attr_release(struct config_item *item)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
+
+	WARN_ON(!list_empty(&cfg->c.functions));
+	list_del(&cfg->c.list);
+	kfree(cfg->c.label);
+	kfree(cfg);
+}
+
+static int config_usb_cfg_link(
+	struct config_item *usb_cfg_ci,
+	struct config_item *usb_func_ci)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(usb_cfg_ci);
+	struct usb_composite_dev *cdev = cfg->c.cdev;
+	struct gadget_info *gi = container_of(cdev, struct gadget_info, cdev);
+
+	struct config_group *group = to_config_group(usb_func_ci);
+	struct usb_function_instance *fi = container_of(group,
+			struct usb_function_instance, group);
+	struct usb_function_instance *a_fi;
+	struct usb_function *f;
+	int ret;
+
+	mutex_lock(&gi->lock);
+	/*
+	 * Make sure this function is from within our _this_ gadget and not
+	 * from another gadget or a random directory.
+	 * Also a function instance can only be linked once.
+	 */
+	list_for_each_entry(a_fi, &gi->available_func, cfs_list) {
+		if (a_fi == fi)
+			break;
+	}
+	if (a_fi != fi) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	list_for_each_entry(f, &cfg->func_list, list) {
+		if (f->fi == fi) {
+			ret = -EEXIST;
+			goto out;
+		}
+	}
+
+	f = usb_get_function(fi);
+	if (IS_ERR(f)) {
+		ret = PTR_ERR(f);
+		goto out;
+	}
+
+	/* stash the function until we bind it to the gadget */
+	list_add_tail(&f->list, &cfg->func_list);
+	ret = 0;
+out:
+	mutex_unlock(&gi->lock);
+	return ret;
+}
+
+static int config_usb_cfg_unlink(
+	struct config_item *usb_cfg_ci,
+	struct config_item *usb_func_ci)
+{
+	struct config_usb_cfg *cfg = to_config_usb_cfg(usb_cfg_ci);
+	struct usb_composite_dev *cdev = cfg->c.cdev;
+	struct gadget_info *gi = container_of(cdev, struct gadget_info, cdev);
+
+	struct config_group *group = to_config_group(usb_func_ci);
+	struct usb_function_instance *fi = container_of(group,
+			struct usb_function_instance, group);
+	struct usb_function *f;
+
+	/*
+	 * ideally I would like to forbid to unlink functions while a gadget is
+	 * bound to an UDC. Since this isn't possible at the moment, we simply
+	 * force an unbind, the function is available here and then we can
+	 * remove the function.
+	 */
+	mutex_lock(&gi->lock);
+	if (gi->udc_name)
+		unregister_gadget(gi);
+	WARN_ON(gi->udc_name);
+
+	list_for_each_entry(f, &cfg->func_list, list) {
+		if (f->fi == fi) {
+			list_del(&f->list);
+			usb_put_function(f);
+			mutex_unlock(&gi->lock);
+			return 0;
+		}
+	}
+	mutex_unlock(&gi->lock);
+	__WARN_printf("Unable to locate function to unbind\n");
+	return 0;
+}
+
+CONFIGFS_ATTR_OPS(config_usb_cfg);
+
+static struct configfs_item_operations gadget_config_item_ops = {
+	.release                = gadget_config_attr_release,
+	.show_attribute         = config_usb_cfg_attr_show,
+	.store_attribute        = config_usb_cfg_attr_store,
+	.allow_link             = config_usb_cfg_link,
+	.drop_link              = config_usb_cfg_unlink,
+};
+
+
+static ssize_t gadget_config_desc_MaxPower_show(struct config_usb_cfg *cfg,
+		char *page)
+{
+	return sprintf(page, "%u\n", cfg->c.MaxPower);
+}
+
+static ssize_t gadget_config_desc_MaxPower_store(struct config_usb_cfg *cfg,
+		const char *page, size_t len)
+{
+	u16 val;
+	int ret;
+	ret = kstrtou16(page, 0, &val);
+	if (ret)
+		return ret;
+	if (DIV_ROUND_UP(val, 8) > 0xff)
+		return -ERANGE;
+	cfg->c.MaxPower = val;
+	return len;
+}
+
+static ssize_t gadget_config_desc_bmAttributes_show(struct config_usb_cfg *cfg,
+		char *page)
+{
+	return sprintf(page, "0x%02x\n", cfg->c.bmAttributes);
+}
+
+static ssize_t gadget_config_desc_bmAttributes_store(struct config_usb_cfg *cfg,
+		const char *page, size_t len)
+{
+	u8 val;
+	int ret;
+	ret = kstrtou8(page, 0, &val);
+	if (ret)
+		return ret;
+	if (!(val & USB_CONFIG_ATT_ONE))
+		return -EINVAL;
+	if (val & ~(USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER |
+				USB_CONFIG_ATT_WAKEUP))
+		return -EINVAL;
+	cfg->c.bmAttributes = val;
+	return len;
+}
+
+#define CFG_CONFIG_DESC_ITEM_ATTR(name)	\
+	static struct config_usb_cfg_attribute gadget_usb_cfg_##name = \
+		__CONFIGFS_ATTR(name,  S_IRUGO | S_IWUSR,		\
+				gadget_config_desc_##name##_show,	\
+				gadget_config_desc_##name##_store)
+
+CFG_CONFIG_DESC_ITEM_ATTR(MaxPower);
+CFG_CONFIG_DESC_ITEM_ATTR(bmAttributes);
+
+static struct configfs_attribute *gadget_config_attrs[] = {
+	&gadget_usb_cfg_MaxPower.attr,
+	&gadget_usb_cfg_bmAttributes.attr,
+	NULL,
+};
+
+static struct config_item_type gadget_config_type = {
+	.ct_item_ops	= &gadget_config_item_ops,
+	.ct_attrs	= gadget_config_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item_type gadget_root_type = {
+	.ct_item_ops	= &gadget_root_item_ops,
+	.ct_attrs	= gadget_root_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void composite_init_dev(struct usb_composite_dev *cdev)
+{
+	spin_lock_init(&cdev->lock);
+	INIT_LIST_HEAD(&cdev->configs);
+	INIT_LIST_HEAD(&cdev->gstrings);
+}
+
+static struct config_group *function_make(
+		struct config_group *group,
+		const char *name)
+{
+	struct gadget_info *gi;
+	struct usb_function_instance *fi;
+	char buf[MAX_NAME_LEN];
+	char *func_name;
+	char *instance_name;
+	int ret;
+
+	ret = snprintf(buf, MAX_NAME_LEN, "%s", name);
+	if (ret >= MAX_NAME_LEN)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	func_name = buf;
+	instance_name = strchr(func_name, '.');
+	if (!instance_name) {
+		pr_err("Unable to locate . in FUNC.INSTANCE\n");
+		return ERR_PTR(-EINVAL);
+	}
+	*instance_name = '\0';
+	instance_name++;
+
+	fi = usb_get_function_instance(func_name);
+	if (IS_ERR(fi))
+		return ERR_PTR(PTR_ERR(fi));
+
+	ret = config_item_set_name(&fi->group.cg_item, name);
+	if (ret) {
+		usb_put_function_instance(fi);
+		return ERR_PTR(ret);
+	}
+
+	gi = container_of(group, struct gadget_info, functions_group);
+
+	mutex_lock(&gi->lock);
+	list_add_tail(&fi->cfs_list, &gi->available_func);
+	mutex_unlock(&gi->lock);
+	return &fi->group;
+}
+
+static void function_drop(
+		struct config_group *group,
+		struct config_item *item)
+{
+	struct usb_function_instance *fi = to_usb_function_instance(item);
+	struct gadget_info *gi;
+
+	gi = container_of(group, struct gadget_info, functions_group);
+
+	mutex_lock(&gi->lock);
+	list_del(&fi->cfs_list);
+	mutex_unlock(&gi->lock);
+	config_item_put(item);
+}
+
+static struct configfs_group_operations functions_ops = {
+	.make_group     = &function_make,
+	.drop_item      = &function_drop,
+};
+
+static struct config_item_type functions_type = {
+	.ct_group_ops   = &functions_ops,
+	.ct_owner       = THIS_MODULE,
+};
+
+CONFIGFS_ATTR_STRUCT(gadget_config_name);
+GS_STRINGS_RW(gadget_config_name, configuration);
+
+static struct configfs_attribute *gadget_config_name_langid_attrs[] = {
+	&gadget_config_name_configuration.attr,
+	NULL,
+};
+
+static void gadget_config_name_attr_release(struct config_item *item)
+{
+	struct gadget_config_name *cn = to_gadget_config_name(item);
+
+	kfree(cn->configuration);
+
+	list_del(&cn->list);
+	kfree(cn);
+}
+
+USB_CONFIG_STRING_RW_OPS(gadget_config_name);
+USB_CONFIG_STRINGS_LANG(gadget_config_name, config_usb_cfg);
+
+static struct config_group *config_desc_make(
+		struct config_group *group,
+		const char *name)
+{
+	struct gadget_info *gi;
+	struct config_usb_cfg *cfg;
+	char buf[MAX_NAME_LEN];
+	char *num_str;
+	u8 num;
+	int ret;
+
+	gi = container_of(group, struct gadget_info, configs_group);
+	ret = snprintf(buf, MAX_NAME_LEN, "%s", name);
+	if (ret >= MAX_NAME_LEN)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	num_str = strchr(buf, '.');
+	if (!num_str) {
+		pr_err("Unable to locate . in name.bConfigurationValue\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	*num_str = '\0';
+	num_str++;
+
+	if (!strlen(buf))
+		return ERR_PTR(-EINVAL);
+
+	ret = kstrtou8(num_str, 0, &num);
+	if (ret)
+		return ERR_PTR(ret);
+
+	cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return ERR_PTR(-ENOMEM);
+	cfg->c.label = kstrdup(buf, GFP_KERNEL);
+	if (!cfg->c.label) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	cfg->c.bConfigurationValue = num;
+	cfg->c.MaxPower = CONFIG_USB_GADGET_VBUS_DRAW;
+	cfg->c.bmAttributes = USB_CONFIG_ATT_ONE;
+	INIT_LIST_HEAD(&cfg->string_list);
+	INIT_LIST_HEAD(&cfg->func_list);
+
+	cfg->group.default_groups = cfg->default_groups;
+	cfg->default_groups[0] = &cfg->strings_group;
+
+	config_group_init_type_name(&cfg->group, name,
+				&gadget_config_type);
+	config_group_init_type_name(&cfg->strings_group, "strings",
+			&gadget_config_name_strings_type);
+
+	ret = usb_add_config_only(&gi->cdev, &cfg->c);
+	if (ret)
+		goto err;
+
+	return &cfg->group;
+err:
+	kfree(cfg->c.label);
+	kfree(cfg);
+	return ERR_PTR(ret);
+}
+
+static void config_desc_drop(
+		struct config_group *group,
+		struct config_item *item)
+{
+	config_item_put(item);
+}
+
+static struct configfs_group_operations config_desc_ops = {
+	.make_group     = &config_desc_make,
+	.drop_item      = &config_desc_drop,
+};
+
+static struct config_item_type config_desc_type = {
+	.ct_group_ops   = &config_desc_ops,
+	.ct_owner       = THIS_MODULE,
+};
+
+CONFIGFS_ATTR_STRUCT(gadget_strings);
+GS_STRINGS_RW(gadget_strings, manufacturer);
+GS_STRINGS_RW(gadget_strings, product);
+GS_STRINGS_RW(gadget_strings, serialnumber);
+
+static struct configfs_attribute *gadget_strings_langid_attrs[] = {
+	&gadget_strings_manufacturer.attr,
+	&gadget_strings_product.attr,
+	&gadget_strings_serialnumber.attr,
+	NULL,
+};
+
+static void gadget_strings_attr_release(struct config_item *item)
+{
+	struct gadget_strings *gs = to_gadget_strings(item);
+
+	kfree(gs->manufacturer);
+	kfree(gs->product);
+	kfree(gs->serialnumber);
+
+	list_del(&gs->list);
+	kfree(gs);
+}
+
+USB_CONFIG_STRING_RW_OPS(gadget_strings);
+USB_CONFIG_STRINGS_LANG(gadget_strings, gadget_info);
+
+static int configfs_do_nothing(struct usb_composite_dev *cdev)
+{
+	__WARN();
+	return -EINVAL;
+}
+
+int composite_dev_prepare(struct usb_composite_driver *composite,
+		struct usb_composite_dev *dev);
+
+static void purge_configs_funcs(struct gadget_info *gi)
+{
+	struct usb_configuration	*c;
+
+	list_for_each_entry(c, &gi->cdev.configs, list) {
+		struct usb_function *f, *tmp;
+		struct config_usb_cfg *cfg;
+
+		cfg = container_of(c, struct config_usb_cfg, c);
+
+		list_for_each_entry_safe(f, tmp, &c->functions, list) {
+
+			list_move_tail(&f->list, &cfg->func_list);
+			if (f->unbind) {
+				dev_err(&gi->cdev.gadget->dev, "unbind function"
+						" '%s'/%p\n", f->name, f);
+				f->unbind(c, f);
+			}
+		}
+		c->next_interface_id = 0;
+		c->superspeed = 0;
+		c->highspeed = 0;
+		c->fullspeed = 0;
+	}
+}
+
+static int configfs_composite_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *gdriver)
+{
+	struct usb_composite_driver     *composite = to_cdriver(gdriver);
+	struct gadget_info		*gi = container_of(composite,
+						struct gadget_info, composite);
+	struct usb_composite_dev	*cdev = &gi->cdev;
+	struct usb_configuration	*c;
+	struct usb_string		*s;
+	unsigned			i;
+	int				ret;
+
+	/* the gi->lock is hold by the caller */
+	cdev->gadget = gadget;
+	set_gadget_data(gadget, cdev);
+	ret = composite_dev_prepare(composite, cdev);
+	if (ret)
+		return ret;
+	/* and now the gadget bind */
+	ret = -EINVAL;
+
+	if (list_empty(&gi->cdev.configs)) {
+		pr_err("Need atleast one configuration in %s.\n",
+				gi->composite.name);
+		goto err_comp_cleanup;
+	}
+
+
+	list_for_each_entry(c, &gi->cdev.configs, list) {
+		struct config_usb_cfg *cfg;
+
+		cfg = container_of(c, struct config_usb_cfg, c);
+		if (list_empty(&cfg->func_list)) {
+			pr_err("Config %s/%d of %s needs atleast one function.\n",
+			      c->label, c->bConfigurationValue,
+			      gi->composite.name);
+			goto err_comp_cleanup;
+		}
+	}
+
+	/* init all strings */
+	if (!list_empty(&gi->string_list)) {
+		struct gadget_strings *gs;
+
+		i = 0;
+		list_for_each_entry(gs, &gi->string_list, list) {
+
+			gi->gstrings[i] = &gs->stringtab_dev;
+			gs->stringtab_dev.strings = gs->strings;
+			gs->strings[USB_GADGET_MANUFACTURER_IDX].s =
+				gs->manufacturer;
+			gs->strings[USB_GADGET_PRODUCT_IDX].s = gs->product;
+			gs->strings[USB_GADGET_SERIAL_IDX].s = gs->serialnumber;
+			i++;
+		}
+		gi->gstrings[i] = NULL;
+		s = usb_gstrings_attach(&gi->cdev, gi->gstrings,
+				USB_GADGET_FIRST_AVAIL_IDX);
+		if (IS_ERR(s))
+			goto err_comp_cleanup;
+
+		gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id;
+		gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id;
+		gi->cdev.desc.iSerialNumber = s[USB_GADGET_SERIAL_IDX].id;
+	}
+
+	/* Go through all configs, attach all functions */
+	list_for_each_entry(c, &gi->cdev.configs, list) {
+		struct config_usb_cfg *cfg;
+		struct usb_function *f;
+		struct usb_function *tmp;
+		struct gadget_config_name *cn;
+
+		cfg = container_of(c, struct config_usb_cfg, c);
+		if (!list_empty(&cfg->string_list)) {
+			i = 0;
+			list_for_each_entry(cn, &cfg->string_list, list) {
+				cfg->gstrings[i] = &cn->stringtab_dev;
+				cn->stringtab_dev.strings = &cn->strings;
+				cn->strings.s = cn->configuration;
+				i++;
+			}
+			cfg->gstrings[i] = NULL;
+			s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1);
+			if (IS_ERR(s))
+				goto err_comp_cleanup;
+			c->iConfiguration = s[0].id;
+		}
+
+		list_for_each_entry_safe(f, tmp, &cfg->func_list, list) {
+			list_del(&f->list);
+			ret = usb_add_function(c, f);
+			if (ret)
+				goto err_purge_funcs;
+		}
+		usb_ep_autoconfig_reset(cdev->gadget);
+	}
+	usb_ep_autoconfig_reset(cdev->gadget);
+	return 0;
+
+err_purge_funcs:
+	purge_configs_funcs(gi);
+err_comp_cleanup:
+	composite_dev_cleanup(cdev);
+	return ret;
+}
+
+static void configfs_composite_unbind(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev;
+	struct gadget_info		*gi;
+
+	/* the gi->lock is hold by the caller */
+
+	cdev = get_gadget_data(gadget);
+	gi = container_of(cdev, struct gadget_info, cdev);
+
+	purge_configs_funcs(gi);
+	composite_dev_cleanup(cdev);
+	usb_ep_autoconfig_reset(cdev->gadget);
+	cdev->gadget = NULL;
+	set_gadget_data(gadget, NULL);
+}
+
+static const struct usb_gadget_driver configfs_driver_template = {
+	.bind           = configfs_composite_bind,
+	.unbind         = configfs_composite_unbind,
+
+	.setup          = composite_setup,
+	.disconnect     = composite_disconnect,
+
+	.max_speed	= USB_SPEED_SUPER,
+	.driver = {
+		.owner          = THIS_MODULE,
+		.name		= "configfs-gadget",
+	},
+};
+
+static struct config_group *gadgets_make(
+		struct config_group *group,
+		const char *name)
+{
+	struct gadget_info *gi;
+
+	gi = kzalloc(sizeof(*gi), GFP_KERNEL);
+	if (!gi)
+		return ERR_PTR(-ENOMEM);
+
+	gi->group.default_groups = gi->default_groups;
+	gi->group.default_groups[0] = &gi->functions_group;
+	gi->group.default_groups[1] = &gi->configs_group;
+	gi->group.default_groups[2] = &gi->strings_group;
+
+	config_group_init_type_name(&gi->functions_group, "functions",
+			&functions_type);
+	config_group_init_type_name(&gi->configs_group, "configs",
+			&config_desc_type);
+	config_group_init_type_name(&gi->strings_group, "strings",
+			&gadget_strings_strings_type);
+
+	gi->composite.bind = configfs_do_nothing;
+	gi->composite.unbind = configfs_do_nothing;
+	gi->composite.suspend = NULL;
+	gi->composite.resume = NULL;
+	gi->composite.max_speed = USB_SPEED_SUPER;
+
+	mutex_init(&gi->lock);
+	INIT_LIST_HEAD(&gi->string_list);
+	INIT_LIST_HEAD(&gi->available_func);
+
+	composite_init_dev(&gi->cdev);
+	gi->cdev.desc.bLength = USB_DT_DEVICE_SIZE;
+	gi->cdev.desc.bDescriptorType = USB_DT_DEVICE;
+	gi->cdev.desc.bcdDevice = cpu_to_le16(get_default_bcdDevice());
+
+	gi->composite.gadget_driver = configfs_driver_template;
+
+	gi->composite.gadget_driver.function = kstrdup(name, GFP_KERNEL);
+	gi->composite.name = gi->composite.gadget_driver.function;
+
+	if (!gi->composite.gadget_driver.function)
+		goto err;
+
+#ifdef CONFIG_USB_OTG
+	gi->otg.bLength = sizeof(struct usb_otg_descriptor);
+	gi->otg.bDescriptorType = USB_DT_OTG;
+	gi->otg.bmAttributes = USB_OTG_SRP | USB_OTG_HNP;
+#endif
+
+	config_group_init_type_name(&gi->group, name,
+				&gadget_root_type);
+	return &gi->group;
+err:
+	kfree(gi);
+	return ERR_PTR(-ENOMEM);
+}
+
+static void gadgets_drop(struct config_group *group, struct config_item *item)
+{
+	config_item_put(item);
+}
+
+static struct configfs_group_operations gadgets_ops = {
+	.make_group     = &gadgets_make,
+	.drop_item      = &gadgets_drop,
+};
+
+static struct config_item_type gadgets_type = {
+	.ct_group_ops   = &gadgets_ops,
+	.ct_owner       = THIS_MODULE,
+};
+
+static struct configfs_subsystem gadget_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "usb_gadget",
+			.ci_type = &gadgets_type,
+		},
+	},
+	.su_mutex = __MUTEX_INITIALIZER(gadget_subsys.su_mutex),
+};
+
+static int __init gadget_cfs_init(void)
+{
+	int ret;
+
+	config_group_init(&gadget_subsys.su_group);
+
+	ret = configfs_register_subsystem(&gadget_subsys);
+	return ret;
+}
+module_init(gadget_cfs_init);
+
+static void __exit gadget_cfs_exit(void)
+{
+	configfs_unregister_subsystem(&gadget_subsys);
+}
+module_exit(gadget_cfs_exit);
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 8cf0c0f6fa1f..a792e322f4f1 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -912,7 +912,6 @@ static int dummy_udc_start(struct usb_gadget *g,
 	dum->devstatus = 0;
 
 	dum->driver = driver;
-	dum->gadget.dev.driver = &driver->driver;
 	dev_dbg(udc_dev(dum), "binding gadget driver '%s'\n",
 			driver->driver.name);
 	return 0;
@@ -927,7 +926,6 @@ static int dummy_udc_stop(struct usb_gadget *g,
 	dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n",
 			driver->driver.name);
 
-	dum->gadget.dev.driver = NULL;
 	dum->driver = NULL;
 
 	return 0;
@@ -937,11 +935,6 @@ static int dummy_udc_stop(struct usb_gadget *g,
 
 /* The gadget structure is stored inside the hcd structure and will be
  * released along with it. */
-static void dummy_gadget_release(struct device *dev)
-{
-	return;
-}
-
 static void init_dummy_udc_hw(struct dummy *dum)
 {
 	int i;
@@ -984,15 +977,7 @@ static int dummy_udc_probe(struct platform_device *pdev)
 	dum->gadget.ops = &dummy_ops;
 	dum->gadget.max_speed = USB_SPEED_SUPER;
 
-	dev_set_name(&dum->gadget.dev, "gadget");
 	dum->gadget.dev.parent = &pdev->dev;
-	dum->gadget.dev.release = dummy_gadget_release;
-	rc = device_register(&dum->gadget.dev);
-	if (rc < 0) {
-		put_device(&dum->gadget.dev);
-		return rc;
-	}
-
 	init_dummy_udc_hw(dum);
 
 	rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget);
@@ -1008,7 +993,6 @@ static int dummy_udc_probe(struct platform_device *pdev)
 err_dev:
 	usb_del_gadget_udc(&dum->gadget);
 err_udc:
-	device_unregister(&dum->gadget.dev);
 	return rc;
 }
 
@@ -1019,7 +1003,6 @@ static int dummy_udc_remove(struct platform_device *pdev)
 	usb_del_gadget_udc(&dum->gadget);
 	platform_set_drvdata(pdev, NULL);
 	device_remove_file(&dum->gadget.dev, &dev_attr_function);
-	device_unregister(&dum->gadget.dev);
 	return 0;
 }
 
@@ -1923,7 +1906,7 @@ done:
 }
 
 /* usb 3.0 root hub device descriptor */
-struct {
+static struct {
 	struct usb_bos_descriptor bos;
 	struct usb_ss_cap_descriptor ss_cap;
 } __packed usb3_bos_desc = {
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 18c3f423706e..56c8ecae9bc3 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -207,7 +207,7 @@ static struct usb_gadget_strings *dev_strings[] = {
 };
 
 static u8 hostaddr[ETH_ALEN];
-
+static struct eth_dev *the_dev;
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -224,7 +224,7 @@ static int __init rndis_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	return rndis_bind_config(c, hostaddr);
+	return rndis_bind_config(c, hostaddr, the_dev);
 }
 
 static struct usb_configuration rndis_config_driver = {
@@ -257,11 +257,11 @@ static int __init eth_do_config(struct usb_configuration *c)
 	}
 
 	if (use_eem)
-		return eem_bind_config(c);
+		return eem_bind_config(c, the_dev);
 	else if (can_support_ecm(c->cdev->gadget))
-		return ecm_bind_config(c, hostaddr);
+		return ecm_bind_config(c, hostaddr, the_dev);
 	else
-		return geth_bind_config(c, hostaddr);
+		return geth_bind_config(c, hostaddr, the_dev);
 }
 
 static struct usb_configuration eth_config_driver = {
@@ -279,9 +279,9 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 	int			status;
 
 	/* set up network link layer */
-	status = gether_setup(cdev->gadget, hostaddr);
-	if (status < 0)
-		return status;
+	the_dev = gether_setup(cdev->gadget, hostaddr);
+	if (IS_ERR(the_dev))
+		return PTR_ERR(the_dev);
 
 	/* set up main config label and device descriptor */
 	if (use_eem) {
@@ -338,13 +338,13 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 	return 0;
 
 fail:
-	gether_cleanup();
+	gether_cleanup(the_dev);
 	return status;
 }
 
 static int __exit eth_unbind(struct usb_composite_dev *cdev)
 {
-	gether_cleanup();
+	gether_cleanup(the_dev);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 1ae180baa597..4b7e33e5d9c6 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -715,13 +715,31 @@ fail:
 	return status;
 }
 
-static struct f_acm *acm_alloc_basic_func(void)
+static void acm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_acm		*acm = func_to_acm(f);
+
+	acm_string_defs[0].id = 0;
+	usb_free_all_descriptors(f);
+	if (acm->notify_req)
+		gs_free_req(acm->notify, acm->notify_req);
+}
+
+static void acm_free_func(struct usb_function *f)
+{
+	struct f_acm		*acm = func_to_acm(f);
+
+	kfree(acm);
+}
+
+static struct usb_function *acm_alloc_func(struct usb_function_instance *fi)
 {
-	struct f_acm	*acm;
+	struct f_serial_opts *opts;
+	struct f_acm *acm;
 
 	acm = kzalloc(sizeof(*acm), GFP_KERNEL);
 	if (!acm)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	spin_lock_init(&acm->lock);
 
@@ -730,109 +748,100 @@ static struct f_acm *acm_alloc_basic_func(void)
 	acm->port.send_break = acm_send_break;
 
 	acm->port.func.name = "acm";
+	acm->port.func.strings = acm_strings;
 	/* descriptors are per-instance copies */
 	acm->port.func.bind = acm_bind;
 	acm->port.func.set_alt = acm_set_alt;
 	acm->port.func.setup = acm_setup;
 	acm->port.func.disable = acm_disable;
 
-	return acm;
+	opts = container_of(fi, struct f_serial_opts, func_inst);
+	acm->port_num = opts->port_num;
+	acm->port.func.unbind = acm_unbind;
+	acm->port.func.free_func = acm_free_func;
+
+	return &acm->port.func;
 }
 
-#ifdef USB_FACM_INCLUDED
-static void
-acm_old_unbind(struct usb_configuration *c, struct usb_function *f)
+static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
 {
-	struct f_acm		*acm = func_to_acm(f);
-
-	usb_free_all_descriptors(f);
-	if (acm->notify_req)
-		gs_free_req(acm->notify, acm->notify_req);
-	kfree(acm);
+	return container_of(to_config_group(item), struct f_serial_opts,
+			func_inst.group);
 }
 
-/**
- * acm_bind_config - add a CDC ACM function to a configuration
- * @c: the configuration to support the CDC ACM instance
- * @port_num: /dev/ttyGS* port this interface will use
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- *
- */
-int acm_bind_config(struct usb_configuration *c, u8 port_num)
+CONFIGFS_ATTR_STRUCT(f_serial_opts);
+static ssize_t f_acm_attr_show(struct config_item *item,
+				 struct configfs_attribute *attr,
+				 char *page)
 {
-	struct f_acm	*acm;
-	int		status;
-
-	/* allocate and initialize one new instance */
-	acm = acm_alloc_basic_func();
-	if (!acm)
-		return -ENOMEM;
-
-	acm->port_num = port_num;
-	acm->port.func.unbind = acm_old_unbind;
-
-	status = usb_add_function(c, &acm->port.func);
-	if (status)
-		kfree(acm);
-	return status;
+	struct f_serial_opts *opts = to_f_serial_opts(item);
+	struct f_serial_opts_attribute *f_serial_opts_attr =
+		container_of(attr, struct f_serial_opts_attribute, attr);
+	ssize_t ret = 0;
+
+	if (f_serial_opts_attr->show)
+		ret = f_serial_opts_attr->show(opts, page);
+	return ret;
 }
 
-#else
-
-static void acm_unbind(struct usb_configuration *c, struct usb_function *f)
+static void acm_attr_release(struct config_item *item)
 {
-	struct f_acm		*acm = func_to_acm(f);
+	struct f_serial_opts *opts = to_f_serial_opts(item);
 
-	acm_string_defs[0].id = 0;
-	usb_free_all_descriptors(f);
-	if (acm->notify_req)
-		gs_free_req(acm->notify, acm->notify_req);
+	usb_put_function_instance(&opts->func_inst);
 }
 
-static void acm_free_func(struct usb_function *f)
-{
-	struct f_acm		*acm = func_to_acm(f);
+static struct configfs_item_operations acm_item_ops = {
+	.release                = acm_attr_release,
+	.show_attribute		= f_acm_attr_show,
+};
 
-	kfree(acm);
+static ssize_t f_acm_port_num_show(struct f_serial_opts *opts, char *page)
+{
+	return sprintf(page, "%u\n", opts->port_num);
 }
 
-static struct usb_function *acm_alloc_func(struct usb_function_instance *fi)
-{
-	struct f_serial_opts *opts;
-	struct f_acm *acm;
+static struct f_serial_opts_attribute f_acm_port_num =
+	__CONFIGFS_ATTR_RO(port_num, f_acm_port_num_show);
 
-	acm = acm_alloc_basic_func();
-	if (!acm)
-		return ERR_PTR(-ENOMEM);
 
-	opts = container_of(fi, struct f_serial_opts, func_inst);
-	acm->port_num = opts->port_num;
-	acm->port.func.unbind = acm_unbind;
-	acm->port.func.free_func = acm_free_func;
+static struct configfs_attribute *acm_attrs[] = {
+	&f_acm_port_num.attr,
+	NULL,
+};
 
-	return &acm->port.func;
-}
+static struct config_item_type acm_func_type = {
+	.ct_item_ops    = &acm_item_ops,
+	.ct_attrs	= acm_attrs,
+	.ct_owner       = THIS_MODULE,
+};
 
 static void acm_free_instance(struct usb_function_instance *fi)
 {
 	struct f_serial_opts *opts;
 
 	opts = container_of(fi, struct f_serial_opts, func_inst);
+	gserial_free_line(opts->port_num);
 	kfree(opts);
 }
 
 static struct usb_function_instance *acm_alloc_instance(void)
 {
 	struct f_serial_opts *opts;
+	int ret;
 
 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
 	if (!opts)
 		return ERR_PTR(-ENOMEM);
 	opts->func_inst.free_func_inst = acm_free_instance;
+	ret = gserial_alloc_line(&opts->port_num);
+	if (ret) {
+		kfree(opts);
+		return ERR_PTR(ret);
+	}
+	config_group_init_type_name(&opts->func_inst.group, "",
+			&acm_func_type);
 	return &opts->func_inst;
 }
 DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func);
 MODULE_LICENSE("GPL");
-#endif
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 83420a310fb7..d893d6929079 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -824,7 +824,8 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f)
  * for calling @gether_cleanup() before module unload.
  */
 int
-ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+		struct eth_dev *dev)
 {
 	struct f_ecm	*ecm;
 	int		status;
@@ -852,6 +853,7 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 	snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%pm", ethaddr);
 	ecm_string_defs[1].s = ecm->ethaddr;
 
+	ecm->port.ioport = dev;
 	ecm->port.cdc_filter = DEFAULT_FILTER;
 
 	ecm->port.func.name = "cdc_ethernet";
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index cf0ebee85563..f4e0bbef602a 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -528,7 +528,7 @@ error:
  * Caller must have called @gether_setup().  Caller is also responsible
  * for calling @gether_cleanup() before module unload.
  */
-int __init eem_bind_config(struct usb_configuration *c)
+int __init eem_bind_config(struct usb_configuration *c, struct eth_dev *dev)
 {
 	struct f_eem	*eem;
 	int		status;
@@ -549,6 +549,7 @@ int __init eem_bind_config(struct usb_configuration *c)
 	if (!eem)
 		return -ENOMEM;
 
+	eem->port.ioport = dev;
 	eem->port.cdc_filter = DEFAULT_FILTER;
 
 	eem->port.func.name = "cdc_eem";
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 5e7557e23ecc..ee19bc8d0040 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -1287,7 +1287,8 @@ ncm_unbind(struct usb_configuration *c, struct usb_function *f)
  * Caller must have called @gether_setup().  Caller is also responsible
  * for calling @gether_cleanup() before module unload.
  */
-int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+		struct eth_dev *dev)
 {
 	struct f_ncm	*ncm;
 	int		status;
@@ -1321,6 +1322,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 
 	spin_lock_init(&ncm->lock);
 	ncm_reset_values(ncm);
+	ncm->port.ioport = dev;
 	ncm->port.is_fixed = true;
 
 	ncm->port.func.name = "cdc_network";
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 36a004563b82..29a348a2a294 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -72,7 +72,7 @@ static struct usb_gadget_strings *obex_strings[] = {
 
 /*-------------------------------------------------------------------------*/
 
-static struct usb_interface_descriptor obex_control_intf __initdata = {
+static struct usb_interface_descriptor obex_control_intf = {
 	.bLength		= sizeof(obex_control_intf),
 	.bDescriptorType	= USB_DT_INTERFACE,
 	.bInterfaceNumber	= 0,
@@ -83,7 +83,7 @@ static struct usb_interface_descriptor obex_control_intf __initdata = {
 	.bInterfaceSubClass	= USB_CDC_SUBCLASS_OBEX,
 };
 
-static struct usb_interface_descriptor obex_data_nop_intf __initdata = {
+static struct usb_interface_descriptor obex_data_nop_intf = {
 	.bLength		= sizeof(obex_data_nop_intf),
 	.bDescriptorType	= USB_DT_INTERFACE,
 	.bInterfaceNumber	= 1,
@@ -93,7 +93,7 @@ static struct usb_interface_descriptor obex_data_nop_intf __initdata = {
 	.bInterfaceClass	= USB_CLASS_CDC_DATA,
 };
 
-static struct usb_interface_descriptor obex_data_intf __initdata = {
+static struct usb_interface_descriptor obex_data_intf = {
 	.bLength		= sizeof(obex_data_intf),
 	.bDescriptorType	= USB_DT_INTERFACE,
 	.bInterfaceNumber	= 2,
@@ -103,14 +103,14 @@ static struct usb_interface_descriptor obex_data_intf __initdata = {
 	.bInterfaceClass	= USB_CLASS_CDC_DATA,
 };
 
-static struct usb_cdc_header_desc obex_cdc_header_desc __initdata = {
+static struct usb_cdc_header_desc obex_cdc_header_desc = {
 	.bLength		= sizeof(obex_cdc_header_desc),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
 	.bDescriptorSubType	= USB_CDC_HEADER_TYPE,
 	.bcdCDC			= cpu_to_le16(0x0120),
 };
 
-static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = {
+static struct usb_cdc_union_desc obex_cdc_union_desc = {
 	.bLength		= sizeof(obex_cdc_union_desc),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
 	.bDescriptorSubType	= USB_CDC_UNION_TYPE,
@@ -118,7 +118,7 @@ static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = {
 	.bSlaveInterface0	= 2,
 };
 
-static struct usb_cdc_obex_desc obex_desc __initdata = {
+static struct usb_cdc_obex_desc obex_desc = {
 	.bLength		= sizeof(obex_desc),
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
 	.bDescriptorSubType	= USB_CDC_OBEX_TYPE,
@@ -127,7 +127,7 @@ static struct usb_cdc_obex_desc obex_desc __initdata = {
 
 /* High-Speed Support */
 
-static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = {
+static struct usb_endpoint_descriptor obex_hs_ep_out_desc = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 
@@ -136,7 +136,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = {
 	.wMaxPacketSize		= cpu_to_le16(512),
 };
 
-static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = {
+static struct usb_endpoint_descriptor obex_hs_ep_in_desc = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 
@@ -145,7 +145,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = {
 	.wMaxPacketSize		= cpu_to_le16(512),
 };
 
-static struct usb_descriptor_header *hs_function[] __initdata = {
+static struct usb_descriptor_header *hs_function[] = {
 	(struct usb_descriptor_header *) &obex_control_intf,
 	(struct usb_descriptor_header *) &obex_cdc_header_desc,
 	(struct usb_descriptor_header *) &obex_desc,
@@ -160,7 +160,7 @@ static struct usb_descriptor_header *hs_function[] __initdata = {
 
 /* Full-Speed Support */
 
-static struct usb_endpoint_descriptor obex_fs_ep_in_desc __initdata = {
+static struct usb_endpoint_descriptor obex_fs_ep_in_desc = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 
@@ -168,7 +168,7 @@ static struct usb_endpoint_descriptor obex_fs_ep_in_desc __initdata = {
 	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_endpoint_descriptor obex_fs_ep_out_desc __initdata = {
+static struct usb_endpoint_descriptor obex_fs_ep_out_desc = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 
@@ -176,7 +176,7 @@ static struct usb_endpoint_descriptor obex_fs_ep_out_desc __initdata = {
 	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_descriptor_header *fs_function[] __initdata = {
+static struct usb_descriptor_header *fs_function[] = {
 	(struct usb_descriptor_header *) &obex_control_intf,
 	(struct usb_descriptor_header *) &obex_cdc_header_desc,
 	(struct usb_descriptor_header *) &obex_desc,
@@ -290,14 +290,43 @@ static void obex_disconnect(struct gserial *g)
 
 /*-------------------------------------------------------------------------*/
 
-static int __init
-obex_bind(struct usb_configuration *c, struct usb_function *f)
+/* Some controllers can't support CDC OBEX ... */
+static inline bool can_support_obex(struct usb_configuration *c)
+{
+	/* Since the first interface is a NOP, we can ignore the
+	 * issue of multi-interface support on most controllers.
+	 *
+	 * Altsettings are mandatory, however...
+	 */
+	if (!gadget_supports_altsettings(c->cdev->gadget))
+		return false;
+
+	/* everything else is *probably* fine ... */
+	return true;
+}
+
+static int obex_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev *cdev = c->cdev;
 	struct f_obex		*obex = func_to_obex(f);
 	int			status;
 	struct usb_ep		*ep;
 
+	if (!can_support_obex(c))
+		return -EINVAL;
+
+	if (obex_string_defs[OBEX_CTRL_IDX].id == 0) {
+		status = usb_string_ids_tab(c->cdev, obex_string_defs);
+		if (status < 0)
+			return status;
+		obex_control_intf.iInterface =
+			obex_string_defs[OBEX_CTRL_IDX].id;
+
+		status = obex_string_defs[OBEX_DATA_IDX].id;
+		obex_data_nop_intf.iInterface = status;
+		obex_data_intf.iInterface = status;
+	}
+
 	/* allocate instance-specific interface IDs, and patch descriptors */
 
 	status = usb_interface_id(c, f);
@@ -376,29 +405,16 @@ fail:
 	return status;
 }
 
+#ifdef USBF_OBEX_INCLUDED
+
 static void
-obex_unbind(struct usb_configuration *c, struct usb_function *f)
+obex_old_unbind(struct usb_configuration *c, struct usb_function *f)
 {
 	obex_string_defs[OBEX_CTRL_IDX].id = 0;
 	usb_free_all_descriptors(f);
 	kfree(func_to_obex(f));
 }
 
-/* Some controllers can't support CDC OBEX ... */
-static inline bool can_support_obex(struct usb_configuration *c)
-{
-	/* Since the first interface is a NOP, we can ignore the
-	 * issue of multi-interface support on most controllers.
-	 *
-	 * Altsettings are mandatory, however...
-	 */
-	if (!gadget_supports_altsettings(c->cdev->gadget))
-		return false;
-
-	/* everything else is *probably* fine ... */
-	return true;
-}
-
 /**
  * obex_bind_config - add a CDC OBEX function to a configuration
  * @c: the configuration to support the CDC OBEX instance
@@ -412,21 +428,6 @@ int __init obex_bind_config(struct usb_configuration *c, u8 port_num)
 	struct f_obex	*obex;
 	int		status;
 
-	if (!can_support_obex(c))
-		return -EINVAL;
-
-	if (obex_string_defs[OBEX_CTRL_IDX].id == 0) {
-		status = usb_string_ids_tab(c->cdev, obex_string_defs);
-		if (status < 0)
-			return status;
-		obex_control_intf.iInterface =
-			obex_string_defs[OBEX_CTRL_IDX].id;
-
-		status = obex_string_defs[OBEX_DATA_IDX].id;
-		obex_data_nop_intf.iInterface = status;
-		obex_data_intf.iInterface = status;
-	}
-
 	/* allocate and initialize one new instance */
 	obex = kzalloc(sizeof *obex, GFP_KERNEL);
 	if (!obex)
@@ -441,7 +442,7 @@ int __init obex_bind_config(struct usb_configuration *c, u8 port_num)
 	obex->port.func.strings = obex_strings;
 	/* descriptors are per-instance copies */
 	obex->port.func.bind = obex_bind;
-	obex->port.func.unbind = obex_unbind;
+	obex->port.func.unbind = obex_old_unbind;
 	obex->port.func.set_alt = obex_set_alt;
 	obex->port.func.get_alt = obex_get_alt;
 	obex->port.func.disable = obex_disable;
@@ -453,5 +454,138 @@ int __init obex_bind_config(struct usb_configuration *c, u8 port_num)
 	return status;
 }
 
+#else
+
+static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_serial_opts,
+			    func_inst.group);
+}
+
+CONFIGFS_ATTR_STRUCT(f_serial_opts);
+static ssize_t f_obex_attr_show(struct config_item *item,
+				struct configfs_attribute *attr,
+				char *page)
+{
+	struct f_serial_opts *opts = to_f_serial_opts(item);
+	struct f_serial_opts_attribute *f_serial_opts_attr =
+		container_of(attr, struct f_serial_opts_attribute, attr);
+	ssize_t ret = 0;
+
+	if (f_serial_opts_attr->show)
+		ret = f_serial_opts_attr->show(opts, page);
+
+	return ret;
+}
+
+static void obex_attr_release(struct config_item *item)
+{
+	struct f_serial_opts *opts = to_f_serial_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations obex_item_ops = {
+	.release	= obex_attr_release,
+	.show_attribute = f_obex_attr_show,
+};
+
+static ssize_t f_obex_port_num_show(struct f_serial_opts *opts, char *page)
+{
+	return sprintf(page, "%u\n", opts->port_num);
+}
+
+static struct f_serial_opts_attribute f_obex_port_num =
+	__CONFIGFS_ATTR_RO(port_num, f_obex_port_num_show);
+
+static struct configfs_attribute *acm_attrs[] = {
+	&f_obex_port_num.attr,
+	NULL,
+};
+
+static struct config_item_type obex_func_type = {
+	.ct_item_ops	= &obex_item_ops,
+	.ct_attrs	= acm_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void obex_free_inst(struct usb_function_instance *f)
+{
+	struct f_serial_opts *opts;
+
+	opts = container_of(f, struct f_serial_opts, func_inst);
+	gserial_free_line(opts->port_num);
+	kfree(opts);
+}
+
+static struct usb_function_instance *obex_alloc_inst(void)
+{
+	struct f_serial_opts *opts;
+	int ret;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	opts->func_inst.free_func_inst = obex_free_inst;
+	ret = gserial_alloc_line(&opts->port_num);
+	if (ret) {
+		kfree(opts);
+		return ERR_PTR(ret);
+	}
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &obex_func_type);
+
+	return &opts->func_inst;
+}
+
+static void obex_free(struct usb_function *f)
+{
+	struct f_obex *obex;
+
+	obex = func_to_obex(f);
+	kfree(obex);
+}
+
+static void obex_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	obex_string_defs[OBEX_CTRL_IDX].id = 0;
+	usb_free_all_descriptors(f);
+}
+
+struct usb_function *obex_alloc(struct usb_function_instance *fi)
+{
+	struct f_obex	*obex;
+	struct f_serial_opts *opts;
+
+	/* allocate and initialize one new instance */
+	obex = kzalloc(sizeof(*obex), GFP_KERNEL);
+	if (!obex)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_serial_opts, func_inst);
+
+	obex->port_num = opts->port_num;
+
+	obex->port.connect = obex_connect;
+	obex->port.disconnect = obex_disconnect;
+
+	obex->port.func.name = "obex";
+	obex->port.func.strings = obex_strings;
+	/* descriptors are per-instance copies */
+	obex->port.func.bind = obex_bind;
+	obex->port.func.unbind = obex_unbind;
+	obex->port.func.set_alt = obex_set_alt;
+	obex->port.func.get_alt = obex_get_alt;
+	obex->port.func.disable = obex_disable;
+	obex->port.func.free_func = obex_free;
+
+	return &obex->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(obex, obex_alloc_inst, obex_alloc);
+
+#endif
+
 MODULE_AUTHOR("Felipe Balbi");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index cc9c49c57c80..36e8c44d8e5e 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -813,7 +813,7 @@ static inline bool can_support_rndis(struct usb_configuration *c)
 
 int
 rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
-				u32 vendorID, const char *manufacturer)
+		u32 vendorID, const char *manufacturer, struct eth_dev *dev)
 {
 	struct f_rndis	*rndis;
 	int		status;
@@ -846,6 +846,7 @@ rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
 	rndis->vendorID = vendorID;
 	rndis->manufacturer = manufacturer;
 
+	rndis->port.ioport = dev;
 	/* RNDIS activates when the host changes this filter */
 	rndis->port.cdc_filter = 0;
 
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index da33cfb3031d..981113c9924d 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -12,6 +12,7 @@
 
 #include <linux/slab.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/device.h>
 
 #include "u_serial.h"
@@ -42,7 +43,7 @@ static inline struct f_gser *func_to_gser(struct usb_function *f)
 
 /* interface descriptor: */
 
-static struct usb_interface_descriptor gser_interface_desc __initdata = {
+static struct usb_interface_descriptor gser_interface_desc = {
 	.bLength =		USB_DT_INTERFACE_SIZE,
 	.bDescriptorType =	USB_DT_INTERFACE,
 	/* .bInterfaceNumber = DYNAMIC */
@@ -55,21 +56,21 @@ static struct usb_interface_descriptor gser_interface_desc __initdata = {
 
 /* full speed support: */
 
-static struct usb_endpoint_descriptor gser_fs_in_desc __initdata = {
+static struct usb_endpoint_descriptor gser_fs_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_endpoint_descriptor gser_fs_out_desc __initdata = {
+static struct usb_endpoint_descriptor gser_fs_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_OUT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_descriptor_header *gser_fs_function[] __initdata = {
+static struct usb_descriptor_header *gser_fs_function[] = {
 	(struct usb_descriptor_header *) &gser_interface_desc,
 	(struct usb_descriptor_header *) &gser_fs_in_desc,
 	(struct usb_descriptor_header *) &gser_fs_out_desc,
@@ -78,47 +79,47 @@ static struct usb_descriptor_header *gser_fs_function[] __initdata = {
 
 /* high speed support: */
 
-static struct usb_endpoint_descriptor gser_hs_in_desc __initdata = {
+static struct usb_endpoint_descriptor gser_hs_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
-static struct usb_endpoint_descriptor gser_hs_out_desc __initdata = {
+static struct usb_endpoint_descriptor gser_hs_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
-static struct usb_descriptor_header *gser_hs_function[] __initdata = {
+static struct usb_descriptor_header *gser_hs_function[] = {
 	(struct usb_descriptor_header *) &gser_interface_desc,
 	(struct usb_descriptor_header *) &gser_hs_in_desc,
 	(struct usb_descriptor_header *) &gser_hs_out_desc,
 	NULL,
 };
 
-static struct usb_endpoint_descriptor gser_ss_in_desc __initdata = {
+static struct usb_endpoint_descriptor gser_ss_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };
 
-static struct usb_endpoint_descriptor gser_ss_out_desc __initdata = {
+static struct usb_endpoint_descriptor gser_ss_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };
 
-static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc __initdata = {
+static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc = {
 	.bLength =              sizeof gser_ss_bulk_comp_desc,
 	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
 };
 
-static struct usb_descriptor_header *gser_ss_function[] __initdata = {
+static struct usb_descriptor_header *gser_ss_function[] = {
 	(struct usb_descriptor_header *) &gser_interface_desc,
 	(struct usb_descriptor_header *) &gser_ss_in_desc,
 	(struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
@@ -183,14 +184,25 @@ static void gser_disable(struct usb_function *f)
 
 /* serial function driver setup/binding */
 
-static int __init
-gser_bind(struct usb_configuration *c, struct usb_function *f)
+static int gser_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev *cdev = c->cdev;
 	struct f_gser		*gser = func_to_gser(f);
 	int			status;
 	struct usb_ep		*ep;
 
+	/* REVISIT might want instance-specific strings to help
+	 * distinguish instances ...
+	 */
+
+	/* maybe allocate device-global string ID */
+	if (gser_string_defs[0].id == 0) {
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		gser_string_defs[0].id = status;
+	}
+
 	/* allocate instance-specific interface IDs */
 	status = usb_interface_id(c, f);
 	if (status < 0)
@@ -246,44 +258,115 @@ fail:
 	return status;
 }
 
-static void
-gser_unbind(struct usb_configuration *c, struct usb_function *f)
+static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
 {
-	usb_free_all_descriptors(f);
-	kfree(func_to_gser(f));
+	return container_of(to_config_group(item), struct f_serial_opts,
+			    func_inst.group);
 }
 
-/**
- * gser_bind_config - add a generic serial function to a configuration
- * @c: the configuration to support the serial instance
- * @port_num: /dev/ttyGS* port this interface will use
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- */
-int __init gser_bind_config(struct usb_configuration *c, u8 port_num)
+CONFIGFS_ATTR_STRUCT(f_serial_opts);
+static ssize_t f_serial_attr_show(struct config_item *item,
+				  struct configfs_attribute *attr,
+				  char *page)
 {
-	struct f_gser	*gser;
-	int		status;
+	struct f_serial_opts *opts = to_f_serial_opts(item);
+	struct f_serial_opts_attribute *f_serial_opts_attr =
+		container_of(attr, struct f_serial_opts_attribute, attr);
+	ssize_t ret = 0;
 
-	/* REVISIT might want instance-specific strings to help
-	 * distinguish instances ...
-	 */
+	if (f_serial_opts_attr->show)
+		ret = f_serial_opts_attr->show(opts, page);
 
-	/* maybe allocate device-global string ID */
-	if (gser_string_defs[0].id == 0) {
-		status = usb_string_id(c->cdev);
-		if (status < 0)
-			return status;
-		gser_string_defs[0].id = status;
+	return ret;
+}
+
+static void serial_attr_release(struct config_item *item)
+{
+	struct f_serial_opts *opts = to_f_serial_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations serial_item_ops = {
+	.release	= serial_attr_release,
+	.show_attribute = f_serial_attr_show,
+};
+
+static ssize_t f_serial_port_num_show(struct f_serial_opts *opts, char *page)
+{
+	return sprintf(page, "%u\n", opts->port_num);
+}
+
+static struct f_serial_opts_attribute f_serial_port_num =
+	__CONFIGFS_ATTR_RO(port_num, f_serial_port_num_show);
+
+static struct configfs_attribute *acm_attrs[] = {
+	&f_serial_port_num.attr,
+	NULL,
+};
+
+static struct config_item_type serial_func_type = {
+	.ct_item_ops	= &serial_item_ops,
+	.ct_attrs	= acm_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void gser_free_inst(struct usb_function_instance *f)
+{
+	struct f_serial_opts *opts;
+
+	opts = container_of(f, struct f_serial_opts, func_inst);
+	gserial_free_line(opts->port_num);
+	kfree(opts);
+}
+
+static struct usb_function_instance *gser_alloc_inst(void)
+{
+	struct f_serial_opts *opts;
+	int ret;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	opts->func_inst.free_func_inst = gser_free_inst;
+	ret = gserial_alloc_line(&opts->port_num);
+	if (ret) {
+		kfree(opts);
+		return ERR_PTR(ret);
 	}
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &serial_func_type);
+
+	return &opts->func_inst;
+}
+
+static void gser_free(struct usb_function *f)
+{
+	struct f_gser *serial;
+
+	serial = func_to_gser(f);
+	kfree(serial);
+}
+
+static void gser_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	usb_free_all_descriptors(f);
+}
+
+struct usb_function *gser_alloc(struct usb_function_instance *fi)
+{
+	struct f_gser	*gser;
+	struct f_serial_opts *opts;
 
 	/* allocate and initialize one new instance */
-	gser = kzalloc(sizeof *gser, GFP_KERNEL);
+	gser = kzalloc(sizeof(*gser), GFP_KERNEL);
 	if (!gser)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
-	gser->port_num = port_num;
+	opts = container_of(fi, struct f_serial_opts, func_inst);
+
+	gser->port_num = opts->port_num;
 
 	gser->port.func.name = "gser";
 	gser->port.func.strings = gser_strings;
@@ -291,9 +374,12 @@ int __init gser_bind_config(struct usb_configuration *c, u8 port_num)
 	gser->port.func.unbind = gser_unbind;
 	gser->port.func.set_alt = gser_set_alt;
 	gser->port.func.disable = gser_disable;
+	gser->port.func.free_func = gser_free;
 
-	status = usb_add_function(c, &gser->port.func);
-	if (status)
-		kfree(gser);
-	return status;
+	return &gser->port.func;
 }
+
+DECLARE_USB_FUNCTION_INIT(gser, gser_alloc_inst, gser_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Al Borchers");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index f172bd152fbb..185d6f5e4e4d 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -380,7 +380,8 @@ geth_unbind(struct usb_configuration *c, struct usb_function *f)
  * Caller must have called @gether_setup().  Caller is also responsible
  * for calling @gether_cleanup() before module unload.
  */
-int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+		struct eth_dev *dev)
 {
 	struct f_gether	*geth;
 	int		status;
@@ -406,6 +407,7 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 	snprintf(geth->ethaddr, sizeof geth->ethaddr, "%pm", ethaddr);
 	geth_string_defs[1].s = geth->ethaddr;
 
+	geth->port.ioport = dev;
 	geth->port.cdc_filter = DEFAULT_FILTER;
 
 	geth->port.func.name = "cdc_subset";
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 92efd6ec48af..38dcedddc52c 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -33,19 +33,15 @@ unsigned int uvc_gadget_trace_param;
 /*-------------------------------------------------------------------------*/
 
 /* module parameters specific to the Video streaming endpoint */
-static unsigned streaming_interval = 1;
+static unsigned int streaming_interval = 1;
 module_param(streaming_interval, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(streaming_interval, "1 - 16");
 
-static unsigned streaming_maxpacket = 1024;
+static unsigned int streaming_maxpacket = 1024;
 module_param(streaming_maxpacket, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(streaming_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
+MODULE_PARM_DESC(streaming_maxpacket, "1 - 1023 (FS), 1 - 3072 (hs/ss)");
 
-static unsigned streaming_mult;
-module_param(streaming_mult, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(streaming_mult, "0 - 2 (hs/ss only)");
-
-static unsigned streaming_maxburst;
+static unsigned int streaming_maxburst;
 module_param(streaming_maxburst, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)");
 
@@ -55,13 +51,11 @@ MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)");
 
 /* string IDs are assigned dynamically */
 
-#define UVC_STRING_ASSOCIATION_IDX		0
-#define UVC_STRING_CONTROL_IDX			1
-#define UVC_STRING_STREAMING_IDX		2
+#define UVC_STRING_CONTROL_IDX			0
+#define UVC_STRING_STREAMING_IDX		1
 
 static struct usb_string uvc_en_us_strings[] = {
-	[UVC_STRING_ASSOCIATION_IDX].s = "UVC Camera",
-	[UVC_STRING_CONTROL_IDX].s = "Video Control",
+	[UVC_STRING_CONTROL_IDX].s = "UVC Camera",
 	[UVC_STRING_STREAMING_IDX].s = "Video Streaming",
 	{  }
 };
@@ -79,7 +73,7 @@ static struct usb_gadget_strings *uvc_function_strings[] = {
 #define UVC_INTF_VIDEO_CONTROL			0
 #define UVC_INTF_VIDEO_STREAMING		1
 
-#define STATUS_BYTECOUNT			16	/* 16 bytes status */
+#define UVC_STATUS_MAX_PACKET_SIZE		16	/* 16 bytes status */
 
 static struct usb_interface_assoc_descriptor uvc_iad __initdata = {
 	.bLength		= sizeof(uvc_iad),
@@ -104,20 +98,29 @@ static struct usb_interface_descriptor uvc_control_intf __initdata = {
 	.iInterface		= 0,
 };
 
-static struct usb_endpoint_descriptor uvc_fs_control_ep __initdata = {
+static struct usb_endpoint_descriptor uvc_control_ep __initdata = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
 	.bmAttributes		= USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize		= cpu_to_le16(STATUS_BYTECOUNT),
+	.wMaxPacketSize		= cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE),
 	.bInterval		= 8,
 };
 
+static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = {
+	.bLength		= sizeof(uvc_ss_control_comp),
+	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
+	/* The following 3 values can be tweaked if necessary. */
+	.bMaxBurst		= 0,
+	.bmAttributes		= 0,
+	.wBytesPerInterval	= cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE),
+};
+
 static struct uvc_control_endpoint_descriptor uvc_control_cs_ep __initdata = {
 	.bLength		= UVC_DT_CONTROL_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_CS_ENDPOINT,
 	.bDescriptorSubType	= UVC_EP_INTERRUPT,
-	.wMaxTransferSize	= cpu_to_le16(STATUS_BYTECOUNT),
+	.wMaxTransferSize	= cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE),
 };
 
 static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = {
@@ -144,63 +147,53 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = {
 	.iInterface		= 0,
 };
 
-static struct usb_endpoint_descriptor uvc_fs_streaming_ep = {
+static struct usb_endpoint_descriptor uvc_fs_streaming_ep __initdata = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
-	.bmAttributes		= USB_ENDPOINT_XFER_ISOC,
-	.wMaxPacketSize		= cpu_to_le16(512),
-	.bInterval		= 1,
+	.bmAttributes		= USB_ENDPOINT_SYNC_ASYNC
+				| USB_ENDPOINT_XFER_ISOC,
+	/* The wMaxPacketSize and bInterval values will be initialized from
+	 * module parameters.
+	 */
+	.wMaxPacketSize		= 0,
+	.bInterval		= 0,
 };
 
-static struct usb_endpoint_descriptor uvc_hs_streaming_ep = {
+static struct usb_endpoint_descriptor uvc_hs_streaming_ep __initdata = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
-	.bmAttributes		= USB_ENDPOINT_XFER_ISOC,
-	.wMaxPacketSize		= cpu_to_le16(1024),
-	.bInterval		= 1,
-};
-
-/* super speed support */
-static struct usb_endpoint_descriptor uvc_ss_control_ep __initdata = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-
-	.bEndpointAddress =	USB_DIR_IN,
-	.bmAttributes =		USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
-	.bInterval =		8,
-};
-
-static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = {
-	.bLength =		sizeof uvc_ss_control_comp,
-	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
-
-	/* the following 3 values can be tweaked if necessary */
-	/* .bMaxBurst =		0, */
-	/* .bmAttributes =	0, */
-	.wBytesPerInterval =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bmAttributes		= USB_ENDPOINT_SYNC_ASYNC
+				| USB_ENDPOINT_XFER_ISOC,
+	/* The wMaxPacketSize and bInterval values will be initialized from
+	 * module parameters.
+	 */
+	.wMaxPacketSize		= 0,
+	.bInterval		= 0,
 };
 
 static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
 
-	.bEndpointAddress =	USB_DIR_IN,
-	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
-	.wMaxPacketSize =	cpu_to_le16(1024),
-	.bInterval =		4,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_SYNC_ASYNC
+				| USB_ENDPOINT_XFER_ISOC,
+	/* The wMaxPacketSize and bInterval values will be initialized from
+	 * module parameters.
+	 */
+	.wMaxPacketSize		= 0,
+	.bInterval		= 0,
 };
 
-static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp = {
-	.bLength =		sizeof uvc_ss_streaming_comp,
-	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
-
-	/* the following 3 values can be tweaked if necessary */
-	.bMaxBurst =		0,
-	.bmAttributes =	0,
-	.wBytesPerInterval =	cpu_to_le16(1024),
+static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp __initdata = {
+	.bLength		= sizeof(uvc_ss_streaming_comp),
+	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
+	/* The following 3 values can be tweaked if necessary. */
+	.bMaxBurst		= 0,
+	.bmAttributes		= 0,
+	.wBytesPerInterval	= cpu_to_le16(1024),
 };
 
 static const struct usb_descriptor_header * const uvc_fs_streaming[] = {
@@ -273,6 +266,13 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 	return 0;
 }
 
+void uvc_function_setup_continue(struct uvc_device *uvc)
+{
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+
+	usb_composite_setup_continue(cdev);
+}
+
 static int
 uvc_function_get_alt(struct usb_function *f, unsigned interface)
 {
@@ -335,7 +335,7 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 		v4l2_event_queue(uvc->vdev, &v4l2_event);
 
 		uvc->state = UVC_STATE_CONNECTED;
-		break;
+		return 0;
 
 	case 1:
 		if (uvc->state != UVC_STATE_CONNECTED)
@@ -352,15 +352,11 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 		memset(&v4l2_event, 0, sizeof(v4l2_event));
 		v4l2_event.type = UVC_EVENT_STREAMON;
 		v4l2_event_queue(uvc->vdev, &v4l2_event);
-
-		uvc->state = UVC_STATE_STREAMING;
-		break;
+		return USB_GADGET_DELAYED_STATUS;
 
 	default:
 		return -EINVAL;
 	}
-
-	return 0;
 }
 
 static void
@@ -454,7 +450,6 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	const struct uvc_descriptor_header * const *uvc_streaming_cls;
 	const struct usb_descriptor_header * const *uvc_streaming_std;
 	const struct usb_descriptor_header * const *src;
-	static struct usb_endpoint_descriptor *uvc_control_ep;
 	struct usb_descriptor_header **dst;
 	struct usb_descriptor_header **hdr;
 	unsigned int control_size;
@@ -468,14 +463,12 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 		uvc_control_desc = uvc->desc.ss_control;
 		uvc_streaming_cls = uvc->desc.ss_streaming;
 		uvc_streaming_std = uvc_ss_streaming;
-		uvc_control_ep = &uvc_ss_control_ep;
 		break;
 
 	case USB_SPEED_HIGH:
 		uvc_control_desc = uvc->desc.fs_control;
 		uvc_streaming_cls = uvc->desc.hs_streaming;
 		uvc_streaming_std = uvc_hs_streaming;
-		uvc_control_ep = &uvc_fs_control_ep;
 		break;
 
 	case USB_SPEED_FULL:
@@ -483,7 +476,6 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 		uvc_control_desc = uvc->desc.fs_control;
 		uvc_streaming_cls = uvc->desc.fs_streaming;
 		uvc_streaming_std = uvc_fs_streaming;
-		uvc_control_ep = &uvc_fs_control_ep;
 		break;
 	}
 
@@ -494,6 +486,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	 * Class-specific UVC control descriptors
 	 * uvc_control_ep
 	 * uvc_control_cs_ep
+	 * uvc_ss_control_comp (for SS only)
 	 * uvc_streaming_intf_alt0
 	 * Class-specific UVC streaming descriptors
 	 * uvc_{fs|hs}_streaming
@@ -503,7 +496,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	control_size = 0;
 	streaming_size = 0;
 	bytes = uvc_iad.bLength + uvc_control_intf.bLength
-	      + uvc_control_ep->bLength + uvc_control_cs_ep.bLength
+	      + uvc_control_ep.bLength + uvc_control_cs_ep.bLength
 	      + uvc_streaming_intf_alt0.bLength;
 
 	if (speed == USB_SPEED_SUPER) {
@@ -514,13 +507,13 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	}
 
 	for (src = (const struct usb_descriptor_header **)uvc_control_desc;
-			*src; ++src) {
+	     *src; ++src) {
 		control_size += (*src)->bLength;
 		bytes += (*src)->bLength;
 		n_desc++;
 	}
 	for (src = (const struct usb_descriptor_header **)uvc_streaming_cls;
-			*src; ++src) {
+	     *src; ++src) {
 		streaming_size += (*src)->bLength;
 		bytes += (*src)->bLength;
 		n_desc++;
@@ -549,7 +542,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	uvc_control_header->bInCollection = 1;
 	uvc_control_header->baInterfaceNr[0] = uvc->streaming_intf;
 
-	UVC_COPY_DESCRIPTOR(mem, dst, uvc_control_ep);
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_ep);
 	if (speed == USB_SPEED_SUPER)
 		UVC_COPY_DESCRIPTOR(mem, dst, &uvc_ss_control_comp);
 
@@ -560,8 +553,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	UVC_COPY_DESCRIPTORS(mem, dst,
 		(const struct usb_descriptor_header**)uvc_streaming_cls);
 	uvc_streaming_header->wTotalLength = cpu_to_le16(streaming_size);
-	uvc_streaming_header->bEndpointAddress =
-		uvc_fs_streaming_ep.bEndpointAddress;
+	uvc_streaming_header->bEndpointAddress = uvc->video.ep->address;
 
 	UVC_COPY_DESCRIPTORS(mem, dst, uvc_streaming_std);
 
@@ -581,7 +573,7 @@ uvc_function_unbind(struct usb_configuration *c, struct usb_function *f)
 	uvc->control_ep->driver_data = NULL;
 	uvc->video.ep->driver_data = NULL;
 
-	uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = 0;
+	uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = 0;
 	usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
 	kfree(uvc->control_buf);
 
@@ -595,31 +587,52 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev *cdev = c->cdev;
 	struct uvc_device *uvc = to_uvc(f);
+	unsigned int max_packet_mult;
+	unsigned int max_packet_size;
 	struct usb_ep *ep;
 	int ret = -EINVAL;
 
 	INFO(cdev, "uvc_function_bind\n");
 
-	/* sanity check the streaming endpoint module parameters */
-	if (streaming_interval < 1)
-		streaming_interval = 1;
-	if (streaming_interval > 16)
-		streaming_interval = 16;
-	if (streaming_mult > 2)
-		streaming_mult = 2;
-	if (streaming_maxburst > 15)
-		streaming_maxburst = 15;
-
-	/*
-	 * fill in the FS video streaming specific descriptors from the
-	 * module parameters
+	/* Sanity check the streaming endpoint module parameters.
 	 */
-	uvc_fs_streaming_ep.wMaxPacketSize = streaming_maxpacket > 1023 ?
-						1023 : streaming_maxpacket;
+	streaming_interval = clamp(streaming_interval, 1U, 16U);
+	streaming_maxpacket = clamp(streaming_maxpacket, 1U, 3072U);
+	streaming_maxburst = min(streaming_maxburst, 15U);
+
+	/* Fill in the FS/HS/SS Video Streaming specific descriptors from the
+	 * module parameters.
+	 *
+	 * NOTE: We assume that the user knows what they are doing and won't
+	 * give parameters that their UDC doesn't support.
+	 */
+	if (streaming_maxpacket <= 1024) {
+		max_packet_mult = 1;
+		max_packet_size = streaming_maxpacket;
+	} else if (streaming_maxpacket <= 2048) {
+		max_packet_mult = 2;
+		max_packet_size = streaming_maxpacket / 2;
+	} else {
+		max_packet_mult = 3;
+		max_packet_size = streaming_maxpacket / 3;
+	}
+
+	uvc_fs_streaming_ep.wMaxPacketSize = min(streaming_maxpacket, 1023U);
 	uvc_fs_streaming_ep.bInterval = streaming_interval;
 
+	uvc_hs_streaming_ep.wMaxPacketSize = max_packet_size;
+	uvc_hs_streaming_ep.wMaxPacketSize |= ((max_packet_mult - 1) << 11);
+	uvc_hs_streaming_ep.bInterval = streaming_interval;
+
+	uvc_ss_streaming_ep.wMaxPacketSize = max_packet_size;
+	uvc_ss_streaming_ep.bInterval = streaming_interval;
+	uvc_ss_streaming_comp.bmAttributes = max_packet_mult - 1;
+	uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
+	uvc_ss_streaming_comp.wBytesPerInterval =
+		max_packet_size * max_packet_mult * streaming_maxburst;
+
 	/* Allocate endpoints. */
-	ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_control_ep);
+	ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep);
 	if (!ep) {
 		INFO(cdev, "Unable to allocate control EP\n");
 		goto error;
@@ -627,7 +640,14 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	uvc->control_ep = ep;
 	ep->driver_data = uvc;
 
-	ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep);
+	if (gadget_is_superspeed(c->cdev->gadget))
+		ep = usb_ep_autoconfig_ss(cdev->gadget, &uvc_ss_streaming_ep,
+					  &uvc_ss_streaming_comp);
+	else if (gadget_is_dualspeed(cdev->gadget))
+		ep = usb_ep_autoconfig(cdev->gadget, &uvc_hs_streaming_ep);
+	else
+		ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep);
+
 	if (!ep) {
 		INFO(cdev, "Unable to allocate streaming EP\n");
 		goto error;
@@ -635,6 +655,10 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	uvc->video.ep = ep;
 	ep->driver_data = uvc;
 
+	uvc_fs_streaming_ep.bEndpointAddress = uvc->video.ep->address;
+	uvc_hs_streaming_ep.bEndpointAddress = uvc->video.ep->address;
+	uvc_ss_streaming_ep.bEndpointAddress = uvc->video.ep->address;
+
 	/* Allocate interface IDs. */
 	if ((ret = usb_interface_id(c, f)) < 0)
 		goto error;
@@ -648,37 +672,6 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	uvc_streaming_intf_alt1.bInterfaceNumber = ret;
 	uvc->streaming_intf = ret;
 
-	/* sanity check the streaming endpoint module parameters */
-	if (streaming_maxpacket > 1024)
-		streaming_maxpacket = 1024;
-	/*
-	 * Fill in the HS descriptors from the module parameters for the Video
-	 * Streaming endpoint.
-	 * NOTE: We assume that the user knows what they are doing and won't
-	 * give parameters that their UDC doesn't support.
-	 */
-	uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket;
-	uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11;
-	uvc_hs_streaming_ep.bInterval = streaming_interval;
-	uvc_hs_streaming_ep.bEndpointAddress =
-		uvc_fs_streaming_ep.bEndpointAddress;
-
-	/*
-	 * Fill in the SS descriptors from the module parameters for the Video
-	 * Streaming endpoint.
-	 * NOTE: We assume that the user knows what they are doing and won't
-	 * give parameters that their UDC doesn't support.
-	 */
-	uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket;
-	uvc_ss_streaming_ep.bInterval = streaming_interval;
-	uvc_ss_streaming_comp.bmAttributes = streaming_mult;
-	uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
-	uvc_ss_streaming_comp.wBytesPerInterval =
-		streaming_maxpacket * (streaming_mult + 1) *
-		(streaming_maxburst + 1);
-	uvc_ss_streaming_ep.bEndpointAddress =
-		uvc_fs_streaming_ep.bEndpointAddress;
-
 	/* Copy descriptors */
 	f->fs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
 	if (gadget_is_dualspeed(cdev->gadget))
@@ -775,23 +768,23 @@ uvc_bind_config(struct usb_configuration *c,
 
 	/* Validate the descriptors. */
 	if (fs_control == NULL || fs_control[0] == NULL ||
-		fs_control[0]->bDescriptorSubType != UVC_VC_HEADER)
+	    fs_control[0]->bDescriptorSubType != UVC_VC_HEADER)
 		goto error;
 
 	if (ss_control == NULL || ss_control[0] == NULL ||
-		ss_control[0]->bDescriptorSubType != UVC_VC_HEADER)
+	    ss_control[0]->bDescriptorSubType != UVC_VC_HEADER)
 		goto error;
 
 	if (fs_streaming == NULL || fs_streaming[0] == NULL ||
-		fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+	    fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
 
 	if (hs_streaming == NULL || hs_streaming[0] == NULL ||
-		hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+	    hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
 
 	if (ss_streaming == NULL || ss_streaming[0] == NULL ||
-		ss_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+	    ss_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
 
 	uvc->desc.fs_control = fs_control;
@@ -800,13 +793,16 @@ uvc_bind_config(struct usb_configuration *c,
 	uvc->desc.hs_streaming = hs_streaming;
 	uvc->desc.ss_streaming = ss_streaming;
 
-	/* Allocate string descriptor numbers. */
-	if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) {
+	/* String descriptors are global, we only need to allocate string IDs
+	 * for the first UVC function. UVC functions beyond the first (if any)
+	 * will reuse the same IDs.
+	 */
+	if (uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id == 0) {
 		ret = usb_string_ids_tab(c->cdev, uvc_en_us_strings);
 		if (ret)
 			goto error;
 		uvc_iad.iFunction =
-			uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id;
+			uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id;
 		uvc_control_intf.iInterface =
 			uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id;
 		ret = uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id;
diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h
index c3d258d30188..ec52752f7326 100644
--- a/drivers/usb/gadget/f_uvc.h
+++ b/drivers/usb/gadget/f_uvc.h
@@ -16,12 +16,12 @@
 #include <linux/usb/composite.h>
 #include <linux/usb/video.h>
 
-extern int uvc_bind_config(struct usb_configuration *c,
-		   const struct uvc_descriptor_header * const *fs_control,
-		   const struct uvc_descriptor_header * const *hs_control,
-		   const struct uvc_descriptor_header * const *fs_streaming,
-		   const struct uvc_descriptor_header * const *hs_streaming,
-		   const struct uvc_descriptor_header * const *ss_streaming);
+int uvc_bind_config(struct usb_configuration *c,
+		    const struct uvc_descriptor_header * const *fs_control,
+		    const struct uvc_descriptor_header * const *hs_control,
+		    const struct uvc_descriptor_header * const *fs_streaming,
+		    const struct uvc_descriptor_header * const *hs_streaming,
+		    const struct uvc_descriptor_header * const *ss_streaming);
 
 #endif /* _F_UVC_H_ */
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 034477ce77c6..9a7ee3347e4d 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2296,7 +2296,6 @@ static int fsl_qe_start(struct usb_gadget *gadget,
 	driver->driver.bus = NULL;
 	/* hook up the driver */
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 	udc->gadget.speed = driver->max_speed;
 
 	/* Enable IRQ reg and Set usbcmd reg EN bit */
@@ -2338,7 +2337,6 @@ static int fsl_qe_stop(struct usb_gadget *gadget,
 		nuke(loop_ep, -ESHUTDOWN);
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
 	dev_info(udc->dev, "unregistered gadget driver '%s'\r\n",
@@ -2523,12 +2521,6 @@ static int qe_udc_probe(struct platform_device *ofdev)
 
 	/* name: Identifies the controller hardware type. */
 	udc->gadget.name = driver_name;
-
-	device_initialize(&udc->gadget.dev);
-
-	dev_set_name(&udc->gadget.dev, "gadget");
-
-	udc->gadget.dev.release = qe_udc_release;
 	udc->gadget.dev.parent = &ofdev->dev;
 
 	/* initialize qe_ep struct */
@@ -2592,22 +2584,17 @@ static int qe_udc_probe(struct platform_device *ofdev)
 		goto err5;
 	}
 
-	ret = device_add(&udc->gadget.dev);
+	ret = usb_add_gadget_udc_release(&ofdev->dev, &udc->gadget,
+			qe_udc_release);
 	if (ret)
 		goto err6;
 
-	ret = usb_add_gadget_udc(&ofdev->dev, &udc->gadget);
-	if (ret)
-		goto err7;
-
 	dev_set_drvdata(&ofdev->dev, udc);
 	dev_info(udc->dev,
 			"%s USB controller initialized as device\n",
 			(udc->soc_type == PORT_QE) ? "QE" : "CPM");
 	return 0;
 
-err7:
-	device_unregister(&udc->gadget.dev);
 err6:
 	free_irq(udc->usb_irq, udc);
 err5:
@@ -2702,7 +2689,6 @@ static int qe_udc_remove(struct platform_device *ofdev)
 
 	iounmap(udc->usb_regs);
 
-	device_unregister(&udc->gadget.dev);
 	/* wait for release() of gadget.dev to free udc */
 	wait_for_completion(&done);
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 04d5fef1440c..7c2a101d19ac 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -185,20 +185,7 @@ static void done(struct fsl_ep *ep, struct fsl_req *req, int status)
 		dma_pool_free(udc->td_pool, curr_td, curr_td->td_dma);
 	}
 
-	if (req->mapped) {
-		dma_unmap_single(ep->udc->gadget.dev.parent,
-			req->req.dma, req->req.length,
-			ep_is_in(ep)
-				? DMA_TO_DEVICE
-				: DMA_FROM_DEVICE);
-		req->req.dma = DMA_ADDR_INVALID;
-		req->mapped = 0;
-	} else
-		dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
-			req->req.dma, req->req.length,
-			ep_is_in(ep)
-				? DMA_TO_DEVICE
-				: DMA_FROM_DEVICE);
+	usb_gadget_unmap_request(&ep->udc->gadget, &req->req, ep_is_in(ep));
 
 	if (status && (status != -ESHUTDOWN))
 		VDBG("complete %s req %p stat %d len %u/%u",
@@ -888,6 +875,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	struct fsl_req *req = container_of(_req, struct fsl_req, req);
 	struct fsl_udc *udc;
 	unsigned long flags;
+	int ret;
 
 	/* catch various bogus parameters */
 	if (!_req || !req->req.complete || !req->req.buf
@@ -910,22 +898,9 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 	req->ep = ep;
 
-	/* map virtual address to hardware */
-	if (req->req.dma == DMA_ADDR_INVALID) {
-		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
-					req->req.buf,
-					req->req.length, ep_is_in(ep)
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-		req->mapped = 1;
-	} else {
-		dma_sync_single_for_device(ep->udc->gadget.dev.parent,
-					req->req.dma, req->req.length,
-					ep_is_in(ep)
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-		req->mapped = 0;
-	}
+	ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep));
+	if (ret)
+		return ret;
 
 	req->req.status = -EINPROGRESS;
 	req->req.actual = 0;
@@ -1290,6 +1265,7 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction)
 {
 	struct fsl_req *req = udc->status_req;
 	struct fsl_ep *ep;
+	int ret;
 
 	if (direction == EP_DIR_IN)
 		udc->ep0_dir = USB_DIR_IN;
@@ -1307,10 +1283,9 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction)
 	req->req.complete = NULL;
 	req->dtd_count = 0;
 
-	req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
-			req->req.buf, req->req.length,
-			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-	req->mapped = 1;
+	ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep));
+	if (ret)
+		return ret;
 
 	if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0)
 		fsl_queue_td(ep, req);
@@ -1353,6 +1328,7 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
 	u16 tmp = 0;		/* Status, cpu endian */
 	struct fsl_req *req;
 	struct fsl_ep *ep;
+	int ret;
 
 	ep = &udc->eps[0];
 
@@ -1390,10 +1366,9 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
 	req->req.complete = NULL;
 	req->dtd_count = 0;
 
-	req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
-				req->req.buf, req->req.length,
-				ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-	req->mapped = 1;
+	ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep));
+	if (ret)
+		goto stall;
 
 	/* prime the data phase */
 	if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0))
@@ -1964,7 +1939,6 @@ static int fsl_udc_start(struct usb_gadget *g,
 	driver->driver.bus = NULL;
 	/* hook up the driver */
 	udc_controller->driver = driver;
-	udc_controller->gadget.dev.driver = &driver->driver;
 	spin_unlock_irqrestore(&udc_controller->lock, flags);
 
 	if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
@@ -1980,7 +1954,6 @@ static int fsl_udc_start(struct usb_gadget *g,
 			if (retval < 0) {
 				ERR("can't bind to transceiver\n");
 				driver->unbind(&udc_controller->gadget);
-				udc_controller->gadget.dev.driver = 0;
 				udc_controller->driver = 0;
 				return retval;
 			}
@@ -2023,7 +1996,6 @@ static int fsl_udc_stop(struct usb_gadget *g,
 		nuke(loop_ep, -ESHUTDOWN);
 	spin_unlock_irqrestore(&udc_controller->lock, flags);
 
-	udc_controller->gadget.dev.driver = NULL;
 	udc_controller->driver = NULL;
 
 	return 0;
@@ -2521,12 +2493,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 
 	/* Setup gadget.dev and register with kernel */
 	dev_set_name(&udc_controller->gadget.dev, "gadget");
-	udc_controller->gadget.dev.release = fsl_udc_release;
-	udc_controller->gadget.dev.parent = &pdev->dev;
 	udc_controller->gadget.dev.of_node = pdev->dev.of_node;
-	ret = device_register(&udc_controller->gadget.dev);
-	if (ret < 0)
-		goto err_free_irq;
 
 	if (!IS_ERR_OR_NULL(udc_controller->transceiver))
 		udc_controller->gadget.is_otg = 1;
@@ -2559,10 +2526,11 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 			DTD_ALIGNMENT, UDC_DMA_BOUNDARY);
 	if (udc_controller->td_pool == NULL) {
 		ret = -ENOMEM;
-		goto err_unregister;
+		goto err_free_irq;
 	}
 
-	ret = usb_add_gadget_udc(&pdev->dev, &udc_controller->gadget);
+	ret = usb_add_gadget_udc_release(&pdev->dev, &udc_controller->gadget,
+			fsl_udc_release);
 	if (ret)
 		goto err_del_udc;
 
@@ -2571,8 +2539,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 
 err_del_udc:
 	dma_pool_destroy(udc_controller->td_pool);
-err_unregister:
-	device_unregister(&udc_controller->gadget.dev);
 err_free_irq:
 	free_irq(udc_controller->irq, udc_controller);
 err_iounmap:
@@ -2622,7 +2588,6 @@ static int __exit fsl_udc_remove(struct platform_device *pdev)
 	if (pdata->operating_mode == FSL_USB2_DR_DEVICE)
 		release_mem_region(res->start, resource_size(res));
 
-	device_unregister(&udc_controller->gadget.dev);
 	/* free udc --wait for the release() finished */
 	wait_for_completion(&done);
 
@@ -2747,21 +2712,7 @@ static struct platform_driver udc_driver = {
 	},
 };
 
-static int __init udc_init(void)
-{
-	printk(KERN_INFO "%s (%s)\n", driver_desc, DRIVER_VERSION);
-	return platform_driver_probe(&udc_driver, fsl_udc_probe);
-}
-
-module_init(udc_init);
-
-static void __exit udc_exit(void)
-{
-	platform_driver_unregister(&udc_driver);
-	printk(KERN_WARNING "%s unregistered\n", driver_desc);
-}
-
-module_exit(udc_exit);
+module_platform_driver_probe(udc_driver, fsl_udc_probe);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 066cb89376de..cec8871b77f9 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -394,7 +394,7 @@ static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep)
 
 	if (reg & FUSB300_EPSET0_STL) {
 		printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep);
-		reg &= ~FUSB300_EPSET0_STL;
+		reg |= FUSB300_EPSET0_STL_CLR;
 		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
 	}
 }
@@ -930,33 +930,33 @@ static void fusb300_wait_idma_finished(struct fusb300_ep *ep)
 
 	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0,
 		FUSB300_IGR0_EPn_PRD_INT(ep->epnum));
+	return;
+
 IDMA_RESET:
-	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGER0,
-		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
+	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGER0);
+	reg &= ~FUSB300_IGER0_EEPn_PRD_INT(ep->epnum);
+	iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_IGER0);
 }
 
-static void  fusb300_set_idma(struct fusb300_ep *ep,
+static void fusb300_set_idma(struct fusb300_ep *ep,
 			struct fusb300_request *req)
 {
-	dma_addr_t d;
-
-	d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE);
+	int ret;
 
-	if (dma_mapping_error(NULL, d)) {
-		printk(KERN_DEBUG "dma_mapping_error\n");
+	ret = usb_gadget_map_request(&ep->fusb300->gadget,
+			&req->req, DMA_TO_DEVICE);
+	if (ret)
 		return;
-	}
-
-	dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE);
 
 	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0,
 		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
 
-	fusb300_fill_idma_prdtbl(ep, d, req->req.length);
+	fusb300_fill_idma_prdtbl(ep, req->req.dma, req->req.length);
 	/* check idma is done */
 	fusb300_wait_idma_finished(ep);
 
-	dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE);
+	usb_gadget_unmap_request(&ep->fusb300->gadget,
+			&req->req, DMA_TO_DEVICE);
 }
 
 static void in_ep_fifo_handler(struct fusb300_ep *ep)
@@ -1316,7 +1316,6 @@ static int fusb300_udc_start(struct usb_gadget *g,
 	/* hook up the driver */
 	driver->driver.bus = NULL;
 	fusb300->driver = driver;
-	fusb300->gadget.dev.driver = &driver->driver;
 
 	return 0;
 }
@@ -1327,7 +1326,6 @@ static int fusb300_udc_stop(struct usb_gadget *g,
 	struct fusb300 *fusb300 = to_fusb300(g);
 
 	driver->unbind(&fusb300->gadget);
-	fusb300->gadget.dev.driver = NULL;
 
 	init_controller(fusb300);
 	fusb300->driver = NULL;
@@ -1422,14 +1420,7 @@ static int __init fusb300_probe(struct platform_device *pdev)
 
 	fusb300->gadget.ops = &fusb300_gadget_ops;
 
-	device_initialize(&fusb300->gadget.dev);
-
-	dev_set_name(&fusb300->gadget.dev, "gadget");
-
 	fusb300->gadget.max_speed = USB_SPEED_HIGH;
-	fusb300->gadget.dev.parent = &pdev->dev;
-	fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	fusb300->gadget.dev.release = pdev->dev.release;
 	fusb300->gadget.name = udc_name;
 	fusb300->reg = reg;
 
@@ -1478,19 +1469,10 @@ static int __init fusb300_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add_udc;
 
-	ret = device_add(&fusb300->gadget.dev);
-	if (ret) {
-		pr_err("device_add error (%d)\n", ret);
-		goto err_add_device;
-	}
-
 	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
 
 	return 0;
 
-err_add_device:
-	usb_del_gadget_udc(&fusb300->gadget);
-
 err_add_udc:
 	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
 
diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h
index 6ba444ae8dd5..ae811d8d38b4 100644
--- a/drivers/usb/gadget/fusb300_udc.h
+++ b/drivers/usb/gadget/fusb300_udc.h
@@ -111,8 +111,8 @@
 /*
  * * EPn Setting 0 (EPn_SET0, offset = 020H+(n-1)*30H, n=1~15 )
  * */
+#define FUSB300_EPSET0_STL_CLR		(1 << 3)
 #define FUSB300_EPSET0_CLRSEQNUM	(1 << 2)
-#define FUSB300_EPSET0_EPn_TX0BYTE	(1 << 1)
 #define FUSB300_EPSET0_STL		(1 << 0)
 
 /*
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 3b343b23e4b0..787a78e92aa2 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -13,7 +13,6 @@
 #define pr_fmt(fmt) "g_ffs: " fmt
 
 #include <linux/module.h>
-
 /*
  * kbuild is not very cooperative with respect to linking separately
  * compiled library objects into one module.  So for now we won't use
@@ -38,13 +37,16 @@
 #  include "u_ether.c"
 
 static u8 gfs_hostaddr[ETH_ALEN];
+static struct eth_dev *the_dev;
 #  ifdef CONFIG_USB_FUNCTIONFS_ETH
-static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+		struct eth_dev *dev);
 #  endif
 #else
-#  define gether_cleanup() do { } while (0)
-#  define gether_setup(gadget, hostaddr)   ((int)0)
+#  define the_dev	NULL
+#  define gether_cleanup(dev) do { } while (0)
 #  define gfs_hostaddr NULL
+struct eth_dev;
 #endif
 
 #include "f_fs.c"
@@ -137,7 +139,8 @@ static struct usb_gadget_strings *gfs_dev_strings[] = {
 
 struct gfs_configuration {
 	struct usb_configuration c;
-	int (*eth)(struct usb_configuration *c, u8 *ethaddr);
+	int (*eth)(struct usb_configuration *c, u8 *ethaddr,
+			struct eth_dev *dev);
 } gfs_configurations[] = {
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{
@@ -346,10 +349,13 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 
 	if (missing_funcs)
 		return -ENODEV;
-
-	ret = gether_setup(cdev->gadget, gfs_hostaddr);
-	if (unlikely(ret < 0))
+#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
+	the_dev = gether_setup(cdev->gadget, gfs_hostaddr);
+#endif
+	if (IS_ERR(the_dev)) {
+		ret = PTR_ERR(the_dev);
 		goto error_quick;
+	}
 	gfs_ether_setup = true;
 
 	ret = usb_string_ids_tab(cdev, gfs_strings);
@@ -386,7 +392,7 @@ error_unbind:
 	for (i = 0; i < func_num; i++)
 		functionfs_unbind(ffs_tab[i].ffs_data);
 error:
-	gether_cleanup();
+	gether_cleanup(the_dev);
 error_quick:
 	gfs_ether_setup = false;
 	return ret;
@@ -410,7 +416,7 @@ static int gfs_unbind(struct usb_composite_dev *cdev)
 	 * do...?
 	 */
 	if (gfs_ether_setup)
-		gether_cleanup();
+		gether_cleanup(the_dev);
 	gfs_ether_setup = false;
 
 	for (i = func_num; i--; )
@@ -440,7 +446,7 @@ static int gfs_do_config(struct usb_configuration *c)
 	}
 
 	if (gc->eth) {
-		ret = gc->eth(c, gfs_hostaddr);
+		ret = gc->eth(c, gfs_hostaddr, the_dev);
 		if (unlikely(ret < 0))
 			return ret;
 	}
@@ -469,11 +475,12 @@ static int gfs_do_config(struct usb_configuration *c)
 
 #ifdef CONFIG_USB_FUNCTIONFS_ETH
 
-static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+		struct eth_dev *dev)
 {
 	return can_support_ecm(c->cdev->gadget)
-		? ecm_bind_config(c, ethaddr)
-		: geth_bind_config(c, ethaddr);
+		? ecm_bind_config(c, ethaddr, dev)
+		: geth_bind_config(c, ethaddr, dev);
 }
 
 #endif
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 85742d4c67df..991aba390d9d 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -51,8 +51,6 @@
 #define	DRIVER_DESC		"TC86C001 USB Device Controller"
 #define	DRIVER_VERSION		"30-Oct 2003"
 
-#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
-
 static const char driver_name [] = "goku_udc";
 static const char driver_desc [] = DRIVER_DESC;
 
@@ -275,7 +273,6 @@ goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 	if (!req)
 		return NULL;
 
-	req->req.dma = DMA_ADDR_INVALID;
 	INIT_LIST_HEAD(&req->queue);
 	return &req->req;
 }
@@ -1354,7 +1351,6 @@ static int goku_udc_start(struct usb_gadget *g,
 	/* hook up the driver */
 	driver->driver.bus = NULL;
 	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
 
 	/*
 	 * then enable host detection and ep0; and we're ready
@@ -1394,7 +1390,6 @@ static int goku_udc_stop(struct usb_gadget *g,
 	dev->driver = NULL;
 	stop_activity(dev, driver);
 	spin_unlock_irqrestore(&dev->lock, flags);
-	dev->gadget.dev.driver = NULL;
 
 	return 0;
 }
@@ -1716,8 +1711,6 @@ static void goku_remove(struct pci_dev *pdev)
 				pci_resource_len (pdev, 0));
 	if (dev->enabled)
 		pci_disable_device(pdev);
-	if (dev->registered)
-		device_unregister(&dev->gadget.dev);
 
 	pci_set_drvdata(pdev, NULL);
 	dev->regs = NULL;
@@ -1756,10 +1749,6 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	dev->gadget.max_speed = USB_SPEED_FULL;
 
 	/* the "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&dev->gadget.dev, "gadget");
-	dev->gadget.dev.parent = &pdev->dev;
-	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	dev->gadget.dev.release = gadget_release;
 	dev->gadget.name = driver_name;
 
 	/* now all the pci goodies ... */
@@ -1810,13 +1799,8 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev);
 #endif
 
-	retval = device_register(&dev->gadget.dev);
-	if (retval) {
-		put_device(&dev->gadget.dev);
-		goto err;
-	}
-	dev->registered = 1;
-	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget,
+			gadget_release);
 	if (retval)
 		goto err;
 
diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
index b4470d2b1d86..86d2adafe149 100644
--- a/drivers/usb/gadget/goku_udc.h
+++ b/drivers/usb/gadget/goku_udc.h
@@ -250,8 +250,7 @@ struct goku_udc {
 					got_region:1,
 					req_config:1,
 					configured:1,
-					enabled:1,
-					registered:1;
+					enabled:1;
 
 	/* pci state used to access those endpoints */
 	struct pci_dev			*pdev;
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 5bd930d779b9..b5cebd6b0d7a 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1338,7 +1338,6 @@ static int imx_udc_start(struct usb_gadget *gadget,
 	imx_usb = container_of(gadget, struct imx_udc_struct, gadget);
 	/* first hook up the driver ... */
 	imx_usb->driver = driver;
-	imx_usb->gadget.dev.driver = &driver->driver;
 
 	D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n",
 		__func__, driver->driver.name);
@@ -1358,7 +1357,6 @@ static int imx_udc_stop(struct usb_gadget *gadget,
 	imx_udc_disable(imx_usb);
 	del_timer(&imx_usb->timer);
 
-	imx_usb->gadget.dev.driver = NULL;
 	imx_usb->driver = NULL;
 
 	D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n",
@@ -1461,15 +1459,6 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 	imx_usb->clk = clk;
 	imx_usb->dev = &pdev->dev;
 
-	device_initialize(&imx_usb->gadget.dev);
-
-	imx_usb->gadget.dev.parent = &pdev->dev;
-	imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask;
-
-	ret = device_add(&imx_usb->gadget.dev);
-	if (retval)
-		goto fail4;
-
 	platform_set_drvdata(pdev, imx_usb);
 
 	usb_init_data(imx_usb);
@@ -1481,11 +1470,9 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 
 	ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget);
 	if (ret)
-		goto fail5;
+		goto fail4;
 
 	return 0;
-fail5:
-	device_unregister(&imx_usb->gadget.dev);
 fail4:
 	for (i = 0; i < IMX_USB_NB_EP + 1; i++)
 		free_irq(imx_usb->usbd_int[i], imx_usb);
@@ -1509,7 +1496,6 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
 	int i;
 
 	usb_del_gadget_udc(&imx_usb->gadget);
-	device_unregister(&imx_usb->gadget.dev);
 	imx_udc_disable(imx_usb);
 	del_timer(&imx_usb->timer);
 
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index aa04089d6899..b943d8cdfbf7 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -1469,23 +1469,7 @@ static void done(struct lpc32xx_ep *ep, struct lpc32xx_request *req, int status)
 		status = req->req.status;
 
 	if (ep->lep) {
-		enum dma_data_direction direction;
-
-		if (ep->is_in)
-			direction = DMA_TO_DEVICE;
-		else
-			direction = DMA_FROM_DEVICE;
-
-		if (req->mapped) {
-			dma_unmap_single(ep->udc->gadget.dev.parent,
-					req->req.dma, req->req.length,
-					direction);
-			req->req.dma = 0;
-			req->mapped = 0;
-		} else
-			dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
-						req->req.dma, req->req.length,
-						direction);
+		usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in);
 
 		/* Free DDs */
 		udc_dd_free(udc, req->dd_desc_ptr);
@@ -1841,26 +1825,11 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep,
 	}
 
 	if (ep->lep) {
-		enum dma_data_direction direction;
 		struct lpc32xx_usbd_dd_gad *dd;
 
-		/* Map DMA pointer */
-		if (ep->is_in)
-			direction = DMA_TO_DEVICE;
-		else
-			direction = DMA_FROM_DEVICE;
-
-		if (req->req.dma == 0) {
-			req->req.dma = dma_map_single(
-				ep->udc->gadget.dev.parent,
-				req->req.buf, req->req.length, direction);
-			req->mapped = 1;
-		} else {
-			dma_sync_single_for_device(
-				ep->udc->gadget.dev.parent, req->req.dma,
-				req->req.length, direction);
-			req->mapped = 0;
-		}
+		status = usb_gadget_map_request(&udc->gadget, _req, ep->is_in);
+		if (status)
+			return status;
 
 		/* For the request, build a list of DDs */
 		dd = udc_dd_alloc(udc);
@@ -2977,7 +2946,6 @@ static int lpc32xx_start(struct usb_gadget *gadget,
 	}
 
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 	udc->gadget.dev.of_node = udc->dev->of_node;
 	udc->enabled = 1;
 	udc->selfpowered = 1;
@@ -3026,7 +2994,6 @@ static int lpc32xx_stop(struct usb_gadget *gadget,
 	}
 
 	udc->enabled = 0;
-	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
 	return 0;
@@ -3248,12 +3215,6 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 	udc_disable(udc);
 	udc_reinit(udc);
 
-	retval = device_register(&udc->gadget.dev);
-	if (retval < 0) {
-		dev_err(udc->dev, "Device registration failure\n");
-		goto dev_register_fail;
-	}
-
 	/* Request IRQs - low and high priority USB device IRQs are routed to
 	 * the same handler, while the DMA interrupt is routed elsewhere */
 	retval = request_irq(udc->udp_irq[IRQ_USB_LP], lpc32xx_usb_lp_irq,
@@ -3320,8 +3281,6 @@ irq_dev_fail:
 irq_hp_fail:
 	free_irq(udc->udp_irq[IRQ_USB_LP], udc);
 irq_lp_fail:
-	device_unregister(&udc->gadget.dev);
-dev_register_fail:
 	dma_pool_destroy(udc->dd_cache);
 dma_alloc_fail:
 	dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
@@ -3376,8 +3335,6 @@ static int lpc32xx_udc_remove(struct platform_device *pdev)
 	free_irq(udc->udp_irq[IRQ_USB_HP], udc);
 	free_irq(udc->udp_irq[IRQ_USB_LP], udc);
 
-	device_unregister(&udc->gadget.dev);
-
 	clk_disable(udc->usb_otg_clk);
 	clk_put(udc->usb_otg_clk);
 	clk_disable(udc->usb_slv_clk);
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index c1b8c2dd808d..866ef0999247 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1471,7 +1471,6 @@ static int m66592_udc_start(struct usb_gadget *g,
 	/* hook up the driver */
 	driver->driver.bus = NULL;
 	m66592->driver = driver;
-	m66592->gadget.dev.driver = &driver->driver;
 
 	m66592_bset(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0);
 	if (m66592_read(m66592, M66592_INTSTS0) & M66592_VBSTS) {
@@ -1494,7 +1493,6 @@ static int m66592_udc_stop(struct usb_gadget *g,
 	m66592_bclr(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0);
 
 	driver->unbind(&m66592->gadget);
-	m66592->gadget.dev.driver = NULL;
 
 	init_controller(m66592);
 	disable_controller(m66592);
@@ -1538,7 +1536,6 @@ static int __exit m66592_remove(struct platform_device *pdev)
 	struct m66592		*m66592 = dev_get_drvdata(&pdev->dev);
 
 	usb_del_gadget_udc(&m66592->gadget);
-	device_del(&m66592->gadget.dev);
 
 	del_timer_sync(&m66592->timer);
 	iounmap(m66592->reg);
@@ -1608,12 +1605,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 	dev_set_drvdata(&pdev->dev, m66592);
 
 	m66592->gadget.ops = &m66592_gadget_ops;
-	device_initialize(&m66592->gadget.dev);
-	dev_set_name(&m66592->gadget.dev, "gadget");
 	m66592->gadget.max_speed = USB_SPEED_HIGH;
-	m66592->gadget.dev.parent = &pdev->dev;
-	m66592->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	m66592->gadget.dev.release = pdev->dev.release;
 	m66592->gadget.name = udc_name;
 
 	init_timer(&m66592->timer);
@@ -1674,12 +1666,6 @@ static int __init m66592_probe(struct platform_device *pdev)
 
 	init_controller(m66592);
 
-	ret = device_add(&m66592->gadget.dev);
-	if (ret) {
-		pr_err("device_add error (%d)\n", ret);
-		goto err_device_add;
-	}
-
 	ret = usb_add_gadget_udc(&pdev->dev, &m66592->gadget);
 	if (ret)
 		goto err_add_udc;
@@ -1688,9 +1674,6 @@ static int __init m66592_probe(struct platform_device *pdev)
 	return 0;
 
 err_add_udc:
-	device_del(&m66592->gadget.dev);
-
-err_device_add:
 	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
 
 clean_up3:
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 20bbbf917fc2..a74ebefc7682 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -135,8 +135,8 @@ static struct fsg_common fsg_common;
 
 static u8 hostaddr[ETH_ALEN];
 
-static unsigned char tty_line;
 static struct usb_function_instance *fi_acm;
+static struct eth_dev *the_dev;
 
 /********** RNDIS **********/
 
@@ -152,7 +152,7 @@ static __init int rndis_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	ret = rndis_bind_config(c, hostaddr);
+	ret = rndis_bind_config(c, hostaddr, the_dev);
 	if (ret < 0)
 		return ret;
 
@@ -214,7 +214,7 @@ static __init int cdc_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	ret = ecm_bind_config(c, hostaddr);
+	ret = ecm_bind_config(c, hostaddr, the_dev);
 	if (ret < 0)
 		return ret;
 
@@ -269,7 +269,6 @@ static int cdc_config_register(struct usb_composite_dev *cdev)
 static int __ref multi_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
-	struct f_serial_opts *opts;
 	int status;
 
 	if (!can_support_ecm(cdev->gadget)) {
@@ -279,24 +278,17 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
 	}
 
 	/* set up network link layer */
-	status = gether_setup(cdev->gadget, hostaddr);
-	if (status < 0)
-		return status;
+	the_dev = gether_setup(cdev->gadget, hostaddr);
+	if (IS_ERR(the_dev))
+		return PTR_ERR(the_dev);
 
 	/* set up serial link layer */
-	status = gserial_alloc_line(&tty_line);
-	if (status < 0)
-		goto fail0;
-
 	fi_acm = usb_get_function_instance("acm");
 	if (IS_ERR(fi_acm)) {
 		status = PTR_ERR(fi_acm);
-		goto fail0dot5;
+		goto fail0;
 	}
 
-	opts = container_of(fi_acm, struct f_serial_opts, func_inst);
-	opts->port_num = tty_line;
-
 	/* set up mass storage function */
 	{
 		void *retp;
@@ -334,10 +326,8 @@ fail2:
 	fsg_common_put(&fsg_common);
 fail1:
 	usb_put_function_instance(fi_acm);
-fail0dot5:
-	gserial_free_line(tty_line);
 fail0:
-	gether_cleanup();
+	gether_cleanup(the_dev);
 	return status;
 }
 
@@ -350,8 +340,7 @@ static int __exit multi_unbind(struct usb_composite_dev *cdev)
 	usb_put_function(f_acm_rndis);
 #endif
 	usb_put_function_instance(fi_acm);
-	gserial_free_line(tty_line);
-	gether_cleanup();
+	gether_cleanup(the_dev);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
index b5cea273c957..58288e9cf728 100644
--- a/drivers/usb/gadget/mv_u3d_core.c
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -30,9 +30,6 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/mv_usb.h>
 #include <linux/clk.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
 
 #include "mv_u3d.h"
 
@@ -125,7 +122,7 @@ static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
 	struct mv_u3d_trb	*curr_trb;
 	dma_addr_t cur_deq_lo;
 	struct mv_u3d_ep_context	*curr_ep_context;
-	int trb_complete, actual, remaining_length;
+	int trb_complete, actual, remaining_length = 0;
 	int direction, ep_num;
 	int retval = 0;
 	u32 tmp, status, length;
@@ -189,6 +186,8 @@ static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
  */
 static
 void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status)
+	__releases(&ep->udc->lock)
+	__acquires(&ep->udc->lock)
 {
 	struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d;
 
@@ -812,19 +811,19 @@ mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		return 0;
 	}
 
-	dev_dbg(u3d->dev, "%s: %s, req: 0x%x\n",
-			__func__, _ep->name, (u32)req);
+	dev_dbg(u3d->dev, "%s: %s, req: 0x%p\n",
+			__func__, _ep->name, req);
 
 	/* catch various bogus parameters */
 	if (!req->req.complete || !req->req.buf
 			|| !list_empty(&req->queue)) {
 		dev_err(u3d->dev,
-			"%s, bad params, _req: 0x%x,"
-			"req->req.complete: 0x%x, req->req.buf: 0x%x,"
+			"%s, bad params, _req: 0x%p,"
+			"req->req.complete: 0x%p, req->req.buf: 0x%p,"
 			"list_empty: 0x%x\n",
-			__func__, (u32)_req,
-			(u32)req->req.complete, (u32)req->req.buf,
-			(u32)list_empty(&req->queue));
+			__func__, _req,
+			req->req.complete, req->req.buf,
+			list_empty(&req->queue));
 		return -EINVAL;
 	}
 	if (unlikely(!ep->ep.desc)) {
@@ -905,7 +904,7 @@ static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 					struct mv_u3d_req, queue);
 
 			/* Point first TRB of next request to the EP context. */
-			iowrite32((u32) next_req->trb_head,
+			iowrite32((unsigned long) next_req->trb_head,
 					&ep_context->trb_addr_lo);
 		} else {
 			struct mv_u3d_ep_context *ep_context;
@@ -1264,7 +1263,6 @@ static int mv_u3d_start(struct usb_gadget *g,
 	/* hook up the driver ... */
 	driver->driver.bus = NULL;
 	u3d->driver = driver;
-	u3d->gadget.dev.driver = &driver->driver;
 
 	u3d->ep0_dir = USB_DIR_OUT;
 
@@ -1302,7 +1300,6 @@ static int mv_u3d_stop(struct usb_gadget *g,
 
 	spin_unlock_irqrestore(&u3d->lock, flags);
 
-	u3d->gadget.dev.driver = NULL;
 	u3d->driver = NULL;
 
 	return 0;
@@ -1525,6 +1522,8 @@ static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup)
 
 static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num,
 	struct usb_ctrlrequest *setup)
+	__releases(&u3c->lock)
+	__acquires(&u3c->lock)
 {
 	bool delegate = false;
 
@@ -1758,11 +1757,6 @@ static irqreturn_t mv_u3d_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static void mv_u3d_gadget_release(struct device *dev)
-{
-	dev_dbg(dev, "%s\n", __func__);
-}
-
 static int mv_u3d_remove(struct platform_device *dev)
 {
 	struct mv_u3d *u3d = platform_get_drvdata(dev);
@@ -1792,8 +1786,6 @@ static int mv_u3d_remove(struct platform_device *dev)
 
 	clk_put(u3d->clk);
 
-	device_unregister(&u3d->gadget.dev);
-
 	platform_set_drvdata(dev, NULL);
 
 	kfree(u3d);
@@ -1829,7 +1821,7 @@ static int mv_u3d_probe(struct platform_device *dev)
 	u3d->dev = &dev->dev;
 	u3d->vbus = pdata->vbus;
 
-	u3d->clk = clk_get(&dev->dev, pdata->clkname[0]);
+	u3d->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(u3d->clk)) {
 		retval = PTR_ERR(u3d->clk);
 		goto err_get_clk;
@@ -1849,8 +1841,9 @@ static int mv_u3d_probe(struct platform_device *dev)
 		retval = -EBUSY;
 		goto err_map_cap_regs;
 	} else {
-		dev_dbg(&dev->dev, "cap_regs address: 0x%x/0x%x\n",
-			(unsigned int)r->start, (unsigned int)u3d->cap_regs);
+		dev_dbg(&dev->dev, "cap_regs address: 0x%lx/0x%lx\n",
+			(unsigned long) r->start,
+			(unsigned long) u3d->cap_regs);
 	}
 
 	/* we will access controller register, so enable the u3d controller */
@@ -1864,10 +1857,10 @@ static int mv_u3d_probe(struct platform_device *dev)
 		}
 	}
 
-	u3d->op_regs = (struct mv_u3d_op_regs __iomem *)((u32)u3d->cap_regs
+	u3d->op_regs = (struct mv_u3d_op_regs __iomem *)(u3d->cap_regs
 		+ MV_U3D_USB3_OP_REGS_OFFSET);
 
-	u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)((u32)u3d->cap_regs
+	u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)(u3d->cap_regs
 		+ ioread32(&u3d->cap_regs->vuoff));
 
 	u3d->max_eps = 16;
@@ -1957,16 +1950,8 @@ static int mv_u3d_probe(struct platform_device *dev)
 	u3d->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
 
 	/* the "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&u3d->gadget.dev, "gadget");
-	u3d->gadget.dev.parent = &dev->dev;
-	u3d->gadget.dev.dma_mask = dev->dev.dma_mask;
-	u3d->gadget.dev.release = mv_u3d_gadget_release;
 	u3d->gadget.name = driver_name;		/* gadget name */
 
-	retval = device_register(&u3d->gadget.dev);
-	if (retval)
-		goto err_register_gadget_device;
-
 	mv_u3d_eps_init(u3d);
 
 	/* external vbus detection */
@@ -1991,8 +1976,6 @@ static int mv_u3d_probe(struct platform_device *dev)
 	return 0;
 
 err_unregister:
-	device_unregister(&u3d->gadget.dev);
-err_register_gadget_device:
 	free_irq(u3d->irq, &dev->dev);
 err_request_irq:
 err_get_irq:
@@ -2021,7 +2004,7 @@ err_pdata:
 	return retval;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int mv_u3d_suspend(struct device *dev)
 {
 	struct mv_u3d *u3d = dev_get_drvdata(dev);
@@ -2064,10 +2047,10 @@ static int mv_u3d_resume(struct device *dev)
 
 	return 0;
 }
-
-SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
 #endif
 
+static SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
+
 static void mv_u3d_shutdown(struct platform_device *dev)
 {
 	struct mv_u3d *u3d = dev_get_drvdata(&dev->dev);
@@ -2080,14 +2063,12 @@ static void mv_u3d_shutdown(struct platform_device *dev)
 
 static struct platform_driver mv_u3d_driver = {
 	.probe		= mv_u3d_probe,
-	.remove		= __exit_p(mv_u3d_remove),
+	.remove		= mv_u3d_remove,
 	.shutdown	= mv_u3d_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "mv-u3d",
-#ifdef CONFIG_PM
 		.pm	= &mv_u3d_pm_ops,
-#endif
 	},
 };
 
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index 9073436d8b24..be77f207dbaf 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -222,8 +222,7 @@ struct mv_udc {
 	struct mv_usb_platform_data     *pdata;
 
 	/* some SOC has mutiple clock sources for USB*/
-	unsigned int    clknum;
-	struct clk      *clk[0];
+	struct clk      *clk;
 };
 
 /* endpoint data structure */
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index c8cf959057fe..c2a57023e467 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -212,6 +212,8 @@ static int process_ep_req(struct mv_udc *udc, int index,
  * request is still in progress.
  */
 static void done(struct mv_ep *ep, struct mv_req *req, int status)
+	__releases(&ep->udc->lock)
+	__acquires(&ep->udc->lock)
 {
 	struct mv_udc *udc = NULL;
 	unsigned char stopped = ep->stopped;
@@ -237,18 +239,7 @@ static void done(struct mv_ep *ep, struct mv_req *req, int status)
 		dma_pool_free(udc->dtd_pool, curr_td, curr_td->td_dma);
 	}
 
-	if (req->mapped) {
-		dma_unmap_single(ep->udc->gadget.dev.parent,
-			req->req.dma, req->req.length,
-			((ep_dir(ep) == EP_DIR_IN) ?
-				DMA_TO_DEVICE : DMA_FROM_DEVICE));
-		req->req.dma = DMA_ADDR_INVALID;
-		req->mapped = 0;
-	} else
-		dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
-			req->req.dma, req->req.length,
-			((ep_dir(ep) == EP_DIR_IN) ?
-				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+	usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep));
 
 	if (status && (status != -ESHUTDOWN))
 		dev_info(&udc->dev->dev, "complete %s req %p stat %d len %u/%u",
@@ -732,21 +723,9 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	req->ep = ep;
 
 	/* map virtual address to hardware */
-	if (req->req.dma == DMA_ADDR_INVALID) {
-		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
-					req->req.buf,
-					req->req.length, ep_dir(ep)
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-		req->mapped = 1;
-	} else {
-		dma_sync_single_for_device(ep->udc->gadget.dev.parent,
-					req->req.dma, req->req.length,
-					ep_dir(ep)
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-		req->mapped = 0;
-	}
+	retval = usb_gadget_map_request(&udc->gadget, _req, ep_dir(ep));
+	if (retval)
+		return retval;
 
 	req->req.status = -EINPROGRESS;
 	req->req.actual = 0;
@@ -780,18 +759,7 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	return 0;
 
 err_unmap_dma:
-	if (req->mapped) {
-		dma_unmap_single(ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				((ep_dir(ep) == EP_DIR_IN) ?
-				DMA_TO_DEVICE : DMA_FROM_DEVICE));
-		req->req.dma = DMA_ADDR_INVALID;
-		req->mapped = 0;
-	} else
-		dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				((ep_dir(ep) == EP_DIR_IN) ?
-				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+	usb_gadget_unmap_request(&udc->gadget, _req, ep_dir(ep));
 
 	return retval;
 }
@@ -1006,18 +974,12 @@ static struct usb_ep_ops mv_ep_ops = {
 
 static void udc_clock_enable(struct mv_udc *udc)
 {
-	unsigned int i;
-
-	for (i = 0; i < udc->clknum; i++)
-		clk_prepare_enable(udc->clk[i]);
+	clk_prepare_enable(udc->clk);
 }
 
 static void udc_clock_disable(struct mv_udc *udc)
 {
-	unsigned int i;
-
-	for (i = 0; i < udc->clknum; i++)
-		clk_disable_unprepare(udc->clk[i]);
+	clk_disable_unprepare(udc->clk);
 }
 
 static void udc_stop(struct mv_udc *udc)
@@ -1386,7 +1348,6 @@ static int mv_udc_start(struct usb_gadget *gadget,
 	/* hook up the driver ... */
 	driver->driver.bus = NULL;
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 
 	udc->usb_state = USB_STATE_ATTACHED;
 	udc->ep0_state = WAIT_FOR_SETUP;
@@ -1401,7 +1362,6 @@ static int mv_udc_start(struct usb_gadget *gadget,
 			dev_err(&udc->dev->dev,
 				"unable to register peripheral to otg\n");
 			udc->driver = NULL;
-			udc->gadget.dev.driver = NULL;
 			return retval;
 		}
 	}
@@ -1437,7 +1397,6 @@ static int mv_udc_stop(struct usb_gadget *gadget,
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	/* unbind gadget driver */
-	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
 	return 0;
@@ -1528,14 +1487,7 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 
 	return 0;
 out:
-	if (req->mapped) {
-		dma_unmap_single(ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				((ep_dir(ep) == EP_DIR_IN) ?
-				DMA_TO_DEVICE : DMA_FROM_DEVICE));
-		req->req.dma = DMA_ADDR_INVALID;
-		req->mapped = 0;
-	}
+	usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep));
 
 	return retval;
 }
@@ -1695,6 +1647,8 @@ out:
 
 static void handle_setup_packet(struct mv_udc *udc, u8 ep_num,
 	struct usb_ctrlrequest *setup)
+	__releases(&ep->udc->lock)
+	__acquires(&ep->udc->lock)
 {
 	bool delegate = false;
 
@@ -1891,7 +1845,7 @@ static void irq_process_tr_complete(struct mv_udc *udc)
 	}
 }
 
-void irq_process_reset(struct mv_udc *udc)
+static void irq_process_reset(struct mv_udc *udc)
 {
 	u32 tmp;
 	unsigned int loops;
@@ -2138,8 +2092,6 @@ static int mv_udc_remove(struct platform_device *pdev)
 
 	mv_udc_disable(udc);
 
-	device_unregister(&udc->gadget.dev);
-
 	/* free dev, wait for the release() finished */
 	wait_for_completion(udc->done);
 
@@ -2151,7 +2103,6 @@ static int mv_udc_probe(struct platform_device *pdev)
 	struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
 	struct mv_udc *udc;
 	int retval = 0;
-	int clk_i = 0;
 	struct resource *r;
 	size_t size;
 
@@ -2160,8 +2111,7 @@ static int mv_udc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum;
-	udc = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL);
 	if (udc == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory for udc\n");
 		return -ENOMEM;
@@ -2173,26 +2123,24 @@ static int mv_udc_probe(struct platform_device *pdev)
 
 	udc->dev = pdev;
 
-#ifdef CONFIG_USB_OTG_UTILS
 	if (pdata->mode == MV_USB_MODE_OTG) {
 		udc->transceiver = devm_usb_get_phy(&pdev->dev,
 					USB_PHY_TYPE_USB2);
-		if (IS_ERR_OR_NULL(udc->transceiver)) {
+		if (IS_ERR(udc->transceiver)) {
+			retval = PTR_ERR(udc->transceiver);
+
+			if (retval == -ENXIO)
+				return retval;
+
 			udc->transceiver = NULL;
-			return -ENODEV;
+			return -EPROBE_DEFER;
 		}
 	}
-#endif
 
-	udc->clknum = pdata->clknum;
-	for (clk_i = 0; clk_i < udc->clknum; clk_i++) {
-		udc->clk[clk_i] = devm_clk_get(&pdev->dev,
-					pdata->clkname[clk_i]);
-		if (IS_ERR(udc->clk[clk_i])) {
-			retval = PTR_ERR(udc->clk[clk_i]);
-			return retval;
-		}
-	}
+	/* udc only have one sysclk. */
+	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(udc->clk))
+		return PTR_ERR(udc->clk);
 
 	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs");
 	if (r == NULL) {
@@ -2311,16 +2259,8 @@ static int mv_udc_probe(struct platform_device *pdev)
 	udc->gadget.max_speed = USB_SPEED_HIGH;	/* support dual speed */
 
 	/* the "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&udc->gadget.dev, "gadget");
-	udc->gadget.dev.parent = &pdev->dev;
-	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	udc->gadget.dev.release = gadget_release;
 	udc->gadget.name = driver_name;		/* gadget name */
 
-	retval = device_register(&udc->gadget.dev);
-	if (retval)
-		goto err_destroy_dma;
-
 	eps_init(udc);
 
 	/* VBUS detect: we can disable/enable clock on demand.*/
@@ -2342,7 +2282,7 @@ static int mv_udc_probe(struct platform_device *pdev)
 		if (!udc->qwork) {
 			dev_err(&pdev->dev, "cannot create workqueue\n");
 			retval = -ENOMEM;
-			goto err_unregister;
+			goto err_destroy_dma;
 		}
 
 		INIT_WORK(&udc->vbus_work, mv_udc_vbus_work);
@@ -2358,7 +2298,8 @@ static int mv_udc_probe(struct platform_device *pdev)
 	else
 		udc->vbus_active = 1;
 
-	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	retval = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
+			gadget_release);
 	if (retval)
 		goto err_create_workqueue;
 
@@ -2370,8 +2311,6 @@ static int mv_udc_probe(struct platform_device *pdev)
 
 err_create_workqueue:
 	destroy_workqueue(udc->qwork);
-err_unregister:
-	device_unregister(&udc->gadget.dev);
 err_destroy_dma:
 	dma_pool_destroy(udc->dtd_pool);
 err_free_dma:
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index a22ad9af0565..3b02fd4649ce 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -111,6 +111,7 @@ static struct usb_gadget_strings *dev_strings[] = {
 	NULL,
 };
 
+struct eth_dev *the_dev;
 static u8 hostaddr[ETH_ALEN];
 
 /*-------------------------------------------------------------------------*/
@@ -124,7 +125,7 @@ static int __init ncm_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	return ncm_bind_config(c, hostaddr);
+	return ncm_bind_config(c, hostaddr, the_dev);
 }
 
 static struct usb_configuration ncm_config_driver = {
@@ -143,9 +144,9 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
 	int			status;
 
 	/* set up network link layer */
-	status = gether_setup(cdev->gadget, hostaddr);
-	if (status < 0)
-		return status;
+	the_dev = gether_setup(cdev->gadget, hostaddr);
+	if (IS_ERR(the_dev))
+		return PTR_ERR(the_dev);
 
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
@@ -168,13 +169,13 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
 	return 0;
 
 fail:
-	gether_cleanup();
+	gether_cleanup(the_dev);
 	return status;
 }
 
 static int __exit gncm_unbind(struct usb_composite_dev *cdev)
 {
-	gether_cleanup();
+	gether_cleanup(the_dev);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index 32524b631959..f1e50a3e322d 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -58,7 +58,6 @@ static const char * const ep_name[] = {
 	"ep-a", "ep-b", "ep-c",
 };
 
-#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
 #ifdef CONFIG_USB_NET2272_DMA
 /*
  * use_dma: the NET2272 can use an external DMA controller.
@@ -341,7 +340,6 @@ net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 	if (!req)
 		return NULL;
 
-	req->req.dma = DMA_ADDR_INVALID;
 	INIT_LIST_HEAD(&req->queue);
 
 	return &req->req;
@@ -913,7 +911,7 @@ net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 			}
 		}
 	}
-	if (likely(req != 0))
+	if (likely(req))
 		list_add_tail(&req->queue, &ep->queue);
 
 	if (likely(!list_empty(&ep->queue)))
@@ -1467,7 +1465,6 @@ static int net2272_start(struct usb_gadget *_gadget,
 	dev->softconnect = 1;
 	driver->driver.bus = NULL;
 	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
 
 	/* ... then enable host detection and ep0; and we're ready
 	 * for set_configuration as well as eventual disconnect.
@@ -1517,7 +1514,6 @@ static int net2272_stop(struct usb_gadget *_gadget,
 	stop_activity(dev, driver);
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
 	dev_dbg(dev->dev, "unregistered driver '%s'\n", driver->driver.name);
@@ -1549,7 +1545,7 @@ net2272_handle_dma(struct net2272_ep *ep)
 	      | (ep->dev->dma_eot_polarity << EOT_POLARITY)
 	      | (ep->dev->dma_dack_polarity << DACK_POLARITY)
 	      | (ep->dev->dma_dreq_polarity << DREQ_POLARITY)
-	      | ((ep->dma >> 1) << DMA_ENDPOINT_SELECT));
+	      | (ep->dma << DMA_ENDPOINT_SELECT));
 
 	ep->dev->dma_busy = 0;
 
@@ -1622,7 +1618,7 @@ net2272_handle_ep(struct net2272_ep *ep)
 	ep->irqs++;
 
 	dev_vdbg(ep->dev->dev, "%s ack ep_stat0 %02x, ep_stat1 %02x, req %p\n",
-		ep->ep.name, stat0, stat1, req ? &req->req : 0);
+		ep->ep.name, stat0, stat1, req ? &req->req : NULL);
 
 	net2272_ep_write(ep, EP_STAT0, stat0 &
 		~((1 << NAK_OUT_PACKETS)
@@ -2216,7 +2212,6 @@ net2272_remove(struct net2272 *dev)
 	free_irq(dev->irq, dev);
 	iounmap(dev->base_addr);
 
-	device_unregister(&dev->gadget.dev);
 	device_remove_file(dev->dev, &dev_attr_registers);
 
 	dev_info(dev->dev, "unbind\n");
@@ -2243,10 +2238,6 @@ static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq)
 	ret->gadget.max_speed = USB_SPEED_HIGH;
 
 	/* the "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&ret->gadget.dev, "gadget");
-	ret->gadget.dev.parent = dev;
-	ret->gadget.dev.dma_mask = dev->dma_mask;
-	ret->gadget.dev.release = net2272_gadget_release;
 	ret->gadget.name = driver_name;
 
 	return ret;
@@ -2282,14 +2273,12 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
 		dma_mode_string());
 	dev_info(dev->dev, "version: %s\n", driver_vers);
 
-	ret = device_register(&dev->gadget.dev);
-	if (ret)
-		goto err_irq;
 	ret = device_create_file(dev->dev, &dev_attr_registers);
 	if (ret)
-		goto err_dev_reg;
+		goto err_irq;
 
-	ret = usb_add_gadget_udc(dev->dev, &dev->gadget);
+	ret = usb_add_gadget_udc_release(dev->dev, &dev->gadget,
+			net2272_gadget_release);
 	if (ret)
 		goto err_add_udc;
 
@@ -2297,8 +2286,6 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
 
 err_add_udc:
 	device_remove_file(dev->dev, &dev_attr_registers);
- err_dev_reg:
-	device_unregister(&dev->gadget.dev);
  err_irq:
 	free_irq(dev->irq, dev);
  err:
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3bd0f992fb49..fbd006ab31d3 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -65,7 +65,6 @@
 #define	DRIVER_DESC		"PLX NET228x USB Peripheral Controller"
 #define	DRIVER_VERSION		"2005 Sept 27"
 
-#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
 #define	EP_DONTUSE		13	/* nonzero */
 
 #define USE_RDK_LEDS		/* GPIO pins control three LEDs */
@@ -406,7 +405,6 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
 	if (!req)
 		return NULL;
 
-	req->req.dma = DMA_ADDR_INVALID;
 	INIT_LIST_HEAD (&req->queue);
 
 	/* this dma descriptor may be swapped with the previous dummy */
@@ -420,7 +418,6 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
 			return NULL;
 		}
 		td->dmacount = 0;	/* not VALID */
-		td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID);
 		td->dmadesc = td->dmaaddr;
 		req->td = td;
 	}
@@ -1896,7 +1893,6 @@ static int net2280_start(struct usb_gadget *_gadget,
 	dev->softconnect = 1;
 	driver->driver.bus = NULL;
 	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
 
 	retval = device_create_file (&dev->pdev->dev, &dev_attr_function);
 	if (retval) goto err_unbind;
@@ -1924,7 +1920,6 @@ static int net2280_start(struct usb_gadget *_gadget,
 err_func:
 	device_remove_file (&dev->pdev->dev, &dev_attr_function);
 err_unbind:
-	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 	return retval;
 }
@@ -1967,7 +1962,6 @@ static int net2280_stop(struct usb_gadget *_gadget,
 	stop_activity (dev, driver);
 	spin_unlock_irqrestore (&dev->lock, flags);
 
-	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
 	net2280_led_active (dev, 0);
@@ -2072,7 +2066,7 @@ static void handle_ep_small (struct net2280_ep *ep)
 		return;
 
 	/* manual DMA queue advance after short OUT */
-	if (likely (ep->dma != 0)) {
+	if (likely (ep->dma)) {
 		if (t & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) {
 			u32	count;
 			int	stopped = ep->stopped;
@@ -2330,7 +2324,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 			/* hw handles device and interface status */
 			if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
 				goto delegate;
-			if ((e = get_ep_by_addr (dev, w_index)) == 0
+			if ((e = get_ep_by_addr (dev, w_index)) == NULL
 					|| w_length > 2)
 				goto do_stall;
 
@@ -2358,7 +2352,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 			if (w_value != USB_ENDPOINT_HALT
 					|| w_length != 0)
 				goto do_stall;
-			if ((e = get_ep_by_addr (dev, w_index)) == 0)
+			if ((e = get_ep_by_addr (dev, w_index)) == NULL)
 				goto do_stall;
 			if (e->wedged) {
 				VDEBUG(dev, "%s wedged, halt not cleared\n",
@@ -2380,7 +2374,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 			if (w_value != USB_ENDPOINT_HALT
 					|| w_length != 0)
 				goto do_stall;
-			if ((e = get_ep_by_addr (dev, w_index)) == 0)
+			if ((e = get_ep_by_addr (dev, w_index)) == NULL)
 				goto do_stall;
 			if (e->ep.name == ep0name)
 				goto do_stall;
@@ -2685,7 +2679,6 @@ static void net2280_remove (struct pci_dev *pdev)
 				pci_resource_len (pdev, 0));
 	if (dev->enabled)
 		pci_disable_device (pdev);
-	device_unregister (&dev->gadget.dev);
 	device_remove_file (&pdev->dev, &dev_attr_registers);
 	pci_set_drvdata (pdev, NULL);
 
@@ -2717,10 +2710,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	dev->gadget.max_speed = USB_SPEED_HIGH;
 
 	/* the "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&dev->gadget.dev, "gadget");
-	dev->gadget.dev.parent = &pdev->dev;
-	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	dev->gadget.dev.release = gadget_release;
 	dev->gadget.name = driver_name;
 
 	/* now all the pci goodies ... */
@@ -2802,7 +2791,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 			goto done;
 		}
 		td->dmacount = 0;	/* not VALID */
-		td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID);
 		td->dmadesc = td->dmaaddr;
 		dev->ep [i].dummy = td;
 	}
@@ -2829,12 +2817,11 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 			use_dma
 				? (use_dma_chaining ? "chaining" : "enabled")
 				: "disabled");
-	retval = device_register (&dev->gadget.dev);
-	if (retval) goto done;
 	retval = device_create_file (&pdev->dev, &dev_attr_registers);
 	if (retval) goto done;
 
-	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget,
+			gadget_release);
 	if (retval)
 		goto done;
 	return 0;
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index def37403989a..3b344b41a167 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -37,11 +37,9 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#define USB_FACM_INCLUDED
-#include "f_acm.c"
+#define USBF_OBEX_INCLUDED
 #include "f_ecm.c"
 #include "f_obex.c"
-#include "f_serial.c"
 #include "f_phonet.c"
 #include "u_ether.c"
 
@@ -98,20 +96,40 @@ MODULE_AUTHOR("Felipe Balbi");
 MODULE_LICENSE("GPL");
 
 /*-------------------------------------------------------------------------*/
-
+static struct usb_function *f_acm_cfg1;
+static struct usb_function *f_acm_cfg2;
 static u8 hostaddr[ETH_ALEN];
+static struct eth_dev *the_dev;
 
 enum {
 	TTY_PORT_OBEX0,
 	TTY_PORT_OBEX1,
-	TTY_PORT_ACM,
 	TTY_PORTS_MAX,
 };
 
 static unsigned char tty_lines[TTY_PORTS_MAX];
 
+static struct usb_configuration nokia_config_500ma_driver = {
+	.label		= "Bus Powered",
+	.bConfigurationValue = 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_ONE,
+	.MaxPower	= 500,
+};
+
+static struct usb_configuration nokia_config_100ma_driver = {
+	.label		= "Self Powered",
+	.bConfigurationValue = 2,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+	.MaxPower	= 100,
+};
+
+static struct usb_function_instance *fi_acm;
+
 static int __init nokia_bind_config(struct usb_configuration *c)
 {
+	struct usb_function *f_acm;
 	int status = 0;
 
 	status = phonet_bind_config(c);
@@ -126,33 +144,32 @@ static int __init nokia_bind_config(struct usb_configuration *c)
 	if (status)
 		printk(KERN_DEBUG "could not bind obex config %d\n", 0);
 
-	status = acm_bind_config(c, tty_lines[TTY_PORT_ACM]);
-	if (status)
-		printk(KERN_DEBUG "could not bind acm config\n");
+	f_acm = usb_get_function(fi_acm);
+	if (IS_ERR(f_acm))
+		return PTR_ERR(f_acm);
 
-	status = ecm_bind_config(c, hostaddr);
+	status = usb_add_function(c, f_acm);
 	if (status)
-		printk(KERN_DEBUG "could not bind ecm config\n");
+		goto err_conf;
+
+	status = ecm_bind_config(c, hostaddr, the_dev);
+	if (status) {
+		pr_debug("could not bind ecm config %d\n", status);
+		goto err_ecm;
+	}
+	if (c == &nokia_config_500ma_driver)
+		f_acm_cfg1 = f_acm;
+	else
+		f_acm_cfg2 = f_acm;
 
 	return status;
+err_ecm:
+	usb_remove_function(c, f_acm);
+err_conf:
+	usb_put_function(f_acm);
+	return status;
 }
 
-static struct usb_configuration nokia_config_500ma_driver = {
-	.label		= "Bus Powered",
-	.bConfigurationValue = 1,
-	/* .iConfiguration = DYNAMIC */
-	.bmAttributes	= USB_CONFIG_ATT_ONE,
-	.MaxPower	= 500,
-};
-
-static struct usb_configuration nokia_config_100ma_driver = {
-	.label		= "Self Powered",
-	.bConfigurationValue = 2,
-	/* .iConfiguration = DYNAMIC */
-	.bmAttributes	= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
-	.MaxPower	= 100,
-};
-
 static int __init nokia_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget	*gadget = cdev->gadget;
@@ -169,9 +186,11 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 			goto err_ether;
 	}
 
-	status = gether_setup(cdev->gadget, hostaddr);
-	if (status < 0)
+	the_dev = gether_setup(cdev->gadget, hostaddr);
+	if (IS_ERR(the_dev)) {
+		status = PTR_ERR(the_dev);
 		goto err_ether;
+	}
 
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
@@ -185,24 +204,32 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 	if (!gadget_supports_altsettings(gadget))
 		goto err_usb;
 
+	fi_acm = usb_get_function_instance("acm");
+	if (IS_ERR(fi_acm))
+		goto err_usb;
+
 	/* finally register the configuration */
 	status = usb_add_config(cdev, &nokia_config_500ma_driver,
 			nokia_bind_config);
 	if (status < 0)
-		goto err_usb;
+		goto err_acm_inst;
 
 	status = usb_add_config(cdev, &nokia_config_100ma_driver,
 			nokia_bind_config);
 	if (status < 0)
-		goto err_usb;
+		goto err_put_cfg1;
 
 	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME);
 
 	return 0;
 
+err_put_cfg1:
+	usb_put_function(f_acm_cfg1);
+err_acm_inst:
+	usb_put_function_instance(fi_acm);
 err_usb:
-	gether_cleanup();
+	gether_cleanup(the_dev);
 err_ether:
 	cur_line--;
 	while (cur_line >= 0)
@@ -217,12 +244,15 @@ static int __exit nokia_unbind(struct usb_composite_dev *cdev)
 {
 	int i;
 
+	usb_put_function(f_acm_cfg1);
+	usb_put_function(f_acm_cfg2);
+	usb_put_function_instance(fi_acm);
 	gphonet_cleanup();
 
 	for (i = 0; i < TTY_PORTS_MAX; i++)
 		gserial_free_line(tty_lines[i]);
 
-	gether_cleanup();
+	gether_cleanup(the_dev);
 
 	return 0;
 }
@@ -247,4 +277,3 @@ static void __exit nokia_cleanup(void)
 	usb_composite_unregister(&nokia_driver);
 }
 module_exit(nokia_cleanup);
-
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index f8445653577f..b8ed74a823cb 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2067,7 +2067,6 @@ static int omap_udc_start(struct usb_gadget *g,
 	/* hook up the driver */
 	driver->driver.bus = NULL;
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	if (udc->dc_clk != NULL)
@@ -2083,7 +2082,6 @@ static int omap_udc_start(struct usb_gadget *g,
 			ERR("can't bind to transceiver\n");
 			if (driver->unbind) {
 				driver->unbind(&udc->gadget);
-				udc->gadget.dev.driver = NULL;
 				udc->driver = NULL;
 			}
 			goto done;
@@ -2129,7 +2127,6 @@ static int omap_udc_stop(struct usb_gadget *g,
 	udc_quiesce(udc);
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
 	if (udc->dc_clk != NULL)
@@ -2631,14 +2628,6 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 	udc->gadget.max_speed = USB_SPEED_FULL;
 	udc->gadget.name = driver_name;
-
-	device_initialize(&udc->gadget.dev);
-	dev_set_name(&udc->gadget.dev, "gadget");
-	udc->gadget.dev.release = omap_udc_release;
-	udc->gadget.dev.parent = &odev->dev;
-	if (use_dma)
-		udc->gadget.dev.dma_mask = odev->dev.dma_mask;
-
 	udc->transceiver = xceiv;
 
 	/* ep0 is special; put it right after the SETUP buffer */
@@ -2912,14 +2901,13 @@ bad_on_1710:
 	}
 
 	create_proc_file();
-	status = device_add(&udc->gadget.dev);
+	status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
+			omap_udc_release);
 	if (status)
 		goto cleanup4;
 
-	status = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
-	if (!status)
-		return status;
-	/* If fail, fall through */
+	return 0;
+
 cleanup4:
 	remove_proc_file();
 
@@ -2990,7 +2978,6 @@ static int omap_udc_remove(struct platform_device *pdev)
 	release_mem_region(pdev->resource[0].start,
 			pdev->resource[0].end - pdev->resource[0].start + 1);
 
-	device_unregister(&udc->gadget.dev);
 	wait_for_completion(&done);
 
 	return 0;
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index a787a8ef672b..24174e1d1564 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -358,7 +358,6 @@ struct pch_udc_dev {
 			prot_stall:1,
 			irq_registered:1,
 			mem_region:1,
-			registered:1,
 			suspended:1,
 			connected:1,
 			vbus_session:1,
@@ -1441,6 +1440,8 @@ static void pch_vbus_gpio_free(struct pch_udc_dev *dev)
  */
 static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
 								 int status)
+	__releases(&dev->lock)
+	__acquires(&dev->lock)
 {
 	struct pch_udc_dev	*dev;
 	unsigned halted = ep->halted;
@@ -2382,6 +2383,8 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
  * @dev:	Reference to the device structure
  */
 static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
+	__releases(&dev->lock)
+	__acquires(&dev->lock)
 {
 	u32	stat;
 	int setup_supported;
@@ -2989,7 +2992,6 @@ static int pch_udc_start(struct usb_gadget *g,
 
 	driver->driver.bus = NULL;
 	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
 
 	/* get ready for ep0 traffic */
 	pch_udc_setup_ep0(dev);
@@ -3010,7 +3012,6 @@ static int pch_udc_stop(struct usb_gadget *g,
 	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
 
 	/* Assures that there are no pending requests with this driver */
-	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 	dev->connected = 0;
 
@@ -3078,8 +3079,6 @@ static void pch_udc_remove(struct pci_dev *pdev)
 				   pci_resource_len(pdev, PCH_UDC_PCI_BAR));
 	if (dev->active)
 		pci_disable_device(pdev);
-	if (dev->registered)
-		device_unregister(&dev->gadget.dev);
 	kfree(dev);
 	pci_set_drvdata(pdev, NULL);
 }
@@ -3196,21 +3195,13 @@ static int pch_udc_probe(struct pci_dev *pdev,
 	if (retval)
 		goto finished;
 
-	dev_set_name(&dev->gadget.dev, "gadget");
-	dev->gadget.dev.parent = &pdev->dev;
-	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	dev->gadget.dev.release = gadget_release;
 	dev->gadget.name = KBUILD_MODNAME;
 	dev->gadget.max_speed = USB_SPEED_HIGH;
 
-	retval = device_register(&dev->gadget.dev);
-	if (retval)
-		goto finished;
-	dev->registered = 1;
-
 	/* Put the device in disconnected state till a driver is bound */
 	pch_udc_set_disconnect(dev);
-	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget,
+			gadget_release);
 	if (retval)
 		goto finished;
 	return 0;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index d0f37484b6b0..ef47495dec8f 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -1263,7 +1263,6 @@ static int pxa25x_udc_start(struct usb_gadget *g,
 
 	/* first hook up the driver ... */
 	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
 	dev->pullup = 1;
 
 	/* ... then enable host detection and ep0; and we're ready
@@ -1325,7 +1324,6 @@ static int pxa25x_udc_stop(struct usb_gadget*g,
 	if (!IS_ERR_OR_NULL(dev->transceiver))
 		(void) otg_set_peripheral(dev->transceiver->otg, NULL);
 
-	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
 	dump_state(dev);
@@ -2138,17 +2136,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	dev->timer.function = udc_watchdog;
 	dev->timer.data = (unsigned long) dev;
 
-	device_initialize(&dev->gadget.dev);
-	dev->gadget.dev.parent = &pdev->dev;
-	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
-
-	retval = device_add(&dev->gadget.dev);
-	if (retval) {
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		goto err_device_add;
-	}
-
 	the_controller = dev;
 	platform_set_drvdata(pdev, dev);
 
@@ -2199,8 +2186,6 @@ lubbock_fail0:
 	free_irq(irq, dev);
 #endif
  err_irq1:
-	device_unregister(&dev->gadget.dev);
- err_device_add:
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
@@ -2226,7 +2211,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 		return -EBUSY;
 
 	usb_del_gadget_udc(&dev->gadget);
-	device_unregister(&dev->gadget.dev);
 	dev->pullup = 0;
 	pullup(dev);
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 2fc867652ef5..6b4c7d95853f 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -24,14 +24,12 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/prefetch.h>
-
-#include <asm/byteorder.h>
-#include <mach/hardware.h>
+#include <linux/byteorder/generic.h>
+#include <linux/platform_data/pxa2xx_udc.h>
 
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <mach/udc.h>
 
 #include "pxa27x_udc.h"
 
@@ -611,7 +609,7 @@ static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
  *
  * Find the physical pxa27x ep, and setup its UDCCR
  */
-static __init void pxa_ep_setup(struct pxa_ep *ep)
+static void pxa_ep_setup(struct pxa_ep *ep)
 {
 	u32 new_udccr;
 
@@ -633,7 +631,7 @@ static __init void pxa_ep_setup(struct pxa_ep *ep)
  *
  * Setup all pxa physical endpoints, except ep0
  */
-static __init void pxa_eps_setup(struct pxa_udc *dev)
+static void pxa_eps_setup(struct pxa_udc *dev)
 {
 	unsigned int i;
 
@@ -1718,7 +1716,7 @@ static void udc_disable(struct pxa_udc *udc)
  * Initializes gadget endpoint list, endpoints locks. No action is taken
  * on the hardware.
  */
-static __init void udc_init_data(struct pxa_udc *dev)
+static void udc_init_data(struct pxa_udc *dev)
 {
 	int i;
 	struct pxa_ep *ep;
@@ -1811,7 +1809,6 @@ static int pxa27x_udc_start(struct usb_gadget *g,
 
 	/* first hook up the driver ... */
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 	dplus_pullup(udc, 1);
 
 	if (!IS_ERR_OR_NULL(udc->transceiver)) {
@@ -1829,7 +1826,6 @@ static int pxa27x_udc_start(struct usb_gadget *g,
 
 fail:
 	udc->driver = NULL;
-	udc->gadget.dev.driver = NULL;
 	return retval;
 }
 
@@ -1871,7 +1867,6 @@ static int pxa27x_udc_stop(struct usb_gadget *g,
 
 	udc->driver = NULL;
 
-
 	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return otg_set_peripheral(udc->transceiver->otg, NULL);
 	return 0;
@@ -2413,7 +2408,7 @@ static struct pxa_udc memory = {
  * Perform basic init : allocates udc clock, creates sysfs files, requests
  * irq.
  */
-static int __init pxa_udc_probe(struct platform_device *pdev)
+static int pxa_udc_probe(struct platform_device *pdev)
 {
 	struct resource *regs;
 	struct pxa_udc *udc = &memory;
@@ -2456,9 +2451,6 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 		goto err_map;
 	}
 
-	device_initialize(&udc->gadget.dev);
-	udc->gadget.dev.parent = &pdev->dev;
-	udc->gadget.dev.dma_mask = NULL;
 	udc->vbus_sensed = 0;
 
 	the_controller = udc;
@@ -2475,12 +2467,6 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
-	retval = device_add(&udc->gadget.dev);
-	if (retval) {
-		dev_err(udc->dev, "device_add error %d\n", retval);
-		goto err_dev_add;
-	}
-
 	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (retval)
 		goto err_add_udc;
@@ -2490,8 +2476,6 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 	return 0;
 
 err_add_udc:
-	device_unregister(&udc->gadget.dev);
-err_dev_add:
 	free_irq(udc->irq, udc);
 err_irq:
 	iounmap(udc->regs);
@@ -2506,13 +2490,12 @@ err_clk:
  * pxa_udc_remove - removes the udc device driver
  * @_dev: platform device
  */
-static int __exit pxa_udc_remove(struct platform_device *_dev)
+static int pxa_udc_remove(struct platform_device *_dev)
 {
 	struct pxa_udc *udc = platform_get_drvdata(_dev);
 	int gpio = udc->mach->gpio_pullup;
 
 	usb_del_gadget_udc(&udc->gadget);
-	device_del(&udc->gadget.dev);
 	usb_gadget_unregister_driver(udc->driver);
 	free_irq(udc->irq, udc);
 	pxa_cleanup_debugfs(udc);
@@ -2625,7 +2608,8 @@ static struct platform_driver udc_driver = {
 		.name	= "pxa27x-udc",
 		.owner	= THIS_MODULE,
 	},
-	.remove		= __exit_p(pxa_udc_remove),
+	.probe		= pxa_udc_probe,
+	.remove		= pxa_udc_remove,
 	.shutdown	= pxa_udc_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= pxa_udc_suspend,
@@ -2633,22 +2617,7 @@ static struct platform_driver udc_driver = {
 #endif
 };
 
-static int __init udc_init(void)
-{
-	if (!cpu_is_pxa27x() && !cpu_is_pxa3xx())
-		return -ENODEV;
-
-	printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
-	return platform_driver_probe(&udc_driver, pxa_udc_probe);
-}
-module_init(udc_init);
-
-
-static void __exit udc_exit(void)
-{
-	platform_driver_unregister(&udc_driver);
-}
-module_exit(udc_exit);
+module_platform_driver(udc_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Robert Jarzmik");
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index f46a1b77ce3e..0b742d171843 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1837,7 +1837,6 @@ static int __exit r8a66597_remove(struct platform_device *pdev)
 		clk_put(r8a66597->clk);
 	}
 
-	device_unregister(&r8a66597->gadget.dev);
 	kfree(r8a66597);
 	return 0;
 }
@@ -1915,17 +1914,8 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
 	r8a66597->gadget.ops = &r8a66597_gadget_ops;
-	dev_set_name(&r8a66597->gadget.dev, "gadget");
 	r8a66597->gadget.max_speed = USB_SPEED_HIGH;
-	r8a66597->gadget.dev.parent = &pdev->dev;
-	r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	r8a66597->gadget.dev.release = pdev->dev.release;
 	r8a66597->gadget.name = udc_name;
-	ret = device_register(&r8a66597->gadget.dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "device_register failed\n");
-		goto clean_up;
-	}
 
 	init_timer(&r8a66597->timer);
 	r8a66597->timer.function = r8a66597_timer;
@@ -1939,7 +1929,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
 				clk_name);
 			ret = PTR_ERR(r8a66597->clk);
-			goto clean_up_dev;
+			goto clean_up;
 		}
 		clk_enable(r8a66597->clk);
 	}
@@ -2007,8 +1997,6 @@ clean_up2:
 		clk_disable(r8a66597->clk);
 		clk_put(r8a66597->clk);
 	}
-clean_up_dev:
-	device_unregister(&r8a66597->gadget.dev);
 clean_up:
 	if (r8a66597) {
 		if (r8a66597->sudmac_reg)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index c26564f29a2c..a3cdc32115d5 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -39,8 +39,6 @@
 
 #include "s3c-hsotg.h"
 
-#define DMA_ADDR_INVALID (~((dma_addr_t)0))
-
 static const char * const s3c_hsotg_supply_names[] = {
 	"vusb_d",		/* digital USB supply, 1.2V */
 	"vusb_a",		/* analog USB supply, 1.1V */
@@ -405,7 +403,6 @@ static struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep,
 
 	INIT_LIST_HEAD(&req->queue);
 
-	req->req.dma = DMA_ADDR_INVALID;
 	return &req->req;
 }
 
@@ -435,24 +432,12 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
 				struct s3c_hsotg_req *hs_req)
 {
 	struct usb_request *req = &hs_req->req;
-	enum dma_data_direction dir;
-
-	dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
 
 	/* ignore this if we're not moving any data */
 	if (hs_req->req.length == 0)
 		return;
 
-	if (hs_req->mapped) {
-		/* we mapped this, so unmap and remove the dma */
-
-		dma_unmap_single(hsotg->dev, req->dma, req->length, dir);
-
-		req->dma = DMA_ADDR_INVALID;
-		hs_req->mapped = 0;
-	} else {
-		dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir);
-	}
+	usb_gadget_unmap_request(&hsotg->gadget, hs_req, hs_ep->dir_in);
 }
 
 /**
@@ -852,37 +837,16 @@ static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
 			     struct s3c_hsotg_ep *hs_ep,
 			     struct usb_request *req)
 {
-	enum dma_data_direction dir;
 	struct s3c_hsotg_req *hs_req = our_req(req);
-
-	dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+	int ret;
 
 	/* if the length is zero, ignore the DMA data */
 	if (hs_req->req.length == 0)
 		return 0;
 
-	if (req->dma == DMA_ADDR_INVALID) {
-		dma_addr_t dma;
-
-		dma = dma_map_single(hsotg->dev, req->buf, req->length, dir);
-
-		if (unlikely(dma_mapping_error(hsotg->dev, dma)))
-			goto dma_error;
-
-		if (dma & 3) {
-			dev_err(hsotg->dev, "%s: unaligned dma buffer\n",
-				__func__);
-
-			dma_unmap_single(hsotg->dev, dma, req->length, dir);
-			return -EINVAL;
-		}
-
-		hs_req->mapped = 1;
-		req->dma = dma;
-	} else {
-		dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir);
-		hs_req->mapped = 0;
-	}
+	ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in);
+	if (ret)
+		goto dma_error;
 
 	return 0;
 
@@ -2961,9 +2925,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
 
 	driver->driver.bus = NULL;
 	hsotg->driver = driver;
-	hsotg->gadget.dev.driver = &driver->driver;
 	hsotg->gadget.dev.of_node = hsotg->dev->of_node;
-	hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
@@ -2979,7 +2941,6 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
 
 err:
 	hsotg->driver = NULL;
-	hsotg->gadget.dev.driver = NULL;
 	return ret;
 }
 
@@ -3014,7 +2975,6 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
 
 	hsotg->driver = NULL;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
-	hsotg->gadget.dev.driver = NULL;
 
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 
@@ -3484,16 +3444,6 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
 }
 
 /**
- * s3c_hsotg_release - release callback for hsotg device
- * @dev: Device to for which release is called
- *
- * Nothing to do as the resource is allocated using devm_ API.
- */
-static void s3c_hsotg_release(struct device *dev)
-{
-}
-
-/**
  * s3c_hsotg_probe - probe function for hsotg driver
  * @pdev: The platform information for the driver
  */
@@ -3517,7 +3467,7 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 	}
 
 	phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(phy)) {
+	if (IS_ERR(phy)) {
 		/* Fallback for pdata */
 		plat = pdev->dev.platform_data;
 		if (!plat) {
@@ -3567,18 +3517,10 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 
 	dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
 
-	device_initialize(&hsotg->gadget.dev);
-
-	dev_set_name(&hsotg->gadget.dev, "gadget");
-
 	hsotg->gadget.max_speed = USB_SPEED_HIGH;
 	hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
 	hsotg->gadget.name = dev_name(dev);
 
-	hsotg->gadget.dev.parent = dev;
-	hsotg->gadget.dev.dma_mask = dev->dma_mask;
-	hsotg->gadget.dev.release = s3c_hsotg_release;
-
 	/* reset the system */
 
 	clk_prepare_enable(hsotg->clk);
@@ -3658,12 +3600,6 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 
 	s3c_hsotg_phy_disable(hsotg);
 
-	ret = device_add(&hsotg->gadget.dev);
-	if (ret) {
-		put_device(&hsotg->gadget.dev);
-		goto err_ep_mem;
-	}
-
 	ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
 	if (ret)
 		goto err_ep_mem;
@@ -3702,10 +3638,8 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
 	}
 
 	s3c_hsotg_phy_disable(hsotg);
-
 	clk_disable_unprepare(hsotg->clk);
 
-	device_unregister(&hsotg->gadget.dev);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 458965a1b138..b1f0771fbd3d 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -283,7 +283,6 @@ static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)
 /**
  * s3c_hsudc_stop_activity - Stop activity on all endpoints.
  * @hsudc: Device controller for which EP activity is to be stopped.
- * @driver: Reference to the gadget driver which is currently active.
  *
  * All the endpoints are stopped and any pending transfer requests if any on
  * the endpoint are terminated.
@@ -1154,7 +1153,6 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
 		return -EBUSY;
 
 	hsudc->driver = driver;
-	hsudc->gadget.dev.driver = &driver->driver;
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies),
 				    hsudc->supplies);
@@ -1190,7 +1188,6 @@ err_otg:
 	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
 err_supplies:
 	hsudc->driver = NULL;
-	hsudc->gadget.dev.driver = NULL;
 	return ret;
 }
 
@@ -1208,7 +1205,6 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget,
 
 	spin_lock_irqsave(&hsudc->lock, flags);
 	hsudc->driver = NULL;
-	hsudc->gadget.dev.driver = NULL;
 	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
 	s3c_hsudc_uninit_phy();
 
@@ -1303,15 +1299,10 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&hsudc->lock);
 
-	dev_set_name(&hsudc->gadget.dev, "gadget");
-
 	hsudc->gadget.max_speed = USB_SPEED_HIGH;
 	hsudc->gadget.ops = &s3c_hsudc_gadget_ops;
 	hsudc->gadget.name = dev_name(dev);
-	hsudc->gadget.dev.parent = dev;
-	hsudc->gadget.dev.dma_mask = dev->dma_mask;
 	hsudc->gadget.ep0 = &hsudc->ep[0].ep;
-
 	hsudc->gadget.is_otg = 0;
 	hsudc->gadget.is_a_peripheral = 0;
 	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
@@ -1345,12 +1336,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 	disable_irq(hsudc->irq);
 	local_irq_enable();
 
-	ret = device_register(&hsudc->gadget.dev);
-	if (ret) {
-		put_device(&hsudc->gadget.dev);
-		goto err_add_device;
-	}
-
 	ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget);
 	if (ret)
 		goto err_add_udc;
@@ -1359,7 +1344,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	return 0;
 err_add_udc:
-	device_unregister(&hsudc->gadget.dev);
 err_add_device:
 	clk_disable(hsudc->uclk);
 err_res:
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 08f89652533b..d0e75e1b3ccb 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1674,7 +1674,6 @@ static int s3c2410_udc_start(struct usb_gadget *g,
 
 	/* Hook the driver */
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 
 	/* Enable udc */
 	s3c2410_udc_enable(udc);
@@ -1824,17 +1823,6 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 		goto err_mem;
 	}
 
-	device_initialize(&udc->gadget.dev);
-	udc->gadget.dev.parent = &pdev->dev;
-	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-
-	/* Bind the driver */
-	retval = device_add(&udc->gadget.dev);
-	if (retval) {
-		dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
-		goto err_device_add;
-	}
-
 	the_controller = udc;
 	platform_set_drvdata(pdev, udc);
 
@@ -1923,8 +1911,6 @@ err_gpio_claim:
 err_int:
 	free_irq(IRQ_USBD, udc);
 err_map:
-	device_unregister(&udc->gadget.dev);
-err_device_add:
 	iounmap(base_addr);
 err_mem:
 	release_mem_region(rsrc_start, rsrc_len);
@@ -1946,7 +1932,6 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
 		return -EBUSY;
 
 	usb_del_gadget_udc(&udc->gadget);
-	device_unregister(&udc->gadget.dev);
 	debugfs_remove(udc->regs_info);
 
 	if (udc_info && !udc_info->udc_command &&
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 68d7bb06ebcb..1f5f978d35d5 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 
@@ -28,18 +29,6 @@
 #define GS_VERSION_NAME			GS_LONG_NAME " " GS_VERSION_STR
 
 /*-------------------------------------------------------------------------*/
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "f_obex.c"
-#include "f_serial.c"
-
-/*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
 
 /* Thanks to NetChip Technologies for donating this product ID.
@@ -126,27 +115,6 @@ module_param(n_ports, uint, 0);
 MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
 
 /*-------------------------------------------------------------------------*/
-static unsigned char tty_lines[MAX_U_SERIAL_PORTS];
-
-static int __init serial_bind_obex_config(struct usb_configuration *c)
-{
-	unsigned i;
-	int status = 0;
-
-	for (i = 0; i < n_ports && status == 0; i++)
-		status = obex_bind_config(c, tty_lines[i]);
-	return status;
-}
-
-static int __init serial_bind_gser_config(struct usb_configuration *c)
-{
-	unsigned i;
-	int status = 0;
-
-	for (i = 0; i < n_ports && status == 0; i++)
-		status = gser_bind_config(c, tty_lines[i]);
-	return status;
-}
 
 static struct usb_configuration serial_config_driver = {
 	/* .label = f(use_acm) */
@@ -169,15 +137,12 @@ static int serial_register_ports(struct usb_composite_dev *cdev,
 		goto out;
 
 	for (i = 0; i < n_ports; i++) {
-		struct f_serial_opts *opts;
 
 		fi_serial[i] = usb_get_function_instance(f_name);
 		if (IS_ERR(fi_serial[i])) {
 			ret = PTR_ERR(fi_serial[i]);
 			goto fail;
 		}
-		opts = container_of(fi_serial[i], struct f_serial_opts, func_inst);
-		opts->port_num = tty_lines[i];
 
 		f_serial[i] = usb_get_function(fi_serial[i]);
 		if (IS_ERR(f_serial[i])) {
@@ -212,13 +177,6 @@ out:
 static int __init gs_bind(struct usb_composite_dev *cdev)
 {
 	int			status;
-	int			cur_line;
-
-	for (cur_line = 0; cur_line < n_ports; cur_line++) {
-		status = gserial_alloc_line(&tty_lines[cur_line]);
-		if (status)
-			goto fail;
-	}
 
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
@@ -243,11 +201,12 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 				"acm");
 		usb_ep_autoconfig_reset(cdev->gadget);
 	} else if (use_obex)
-		status = usb_add_config(cdev, &serial_config_driver,
-				serial_bind_obex_config);
-	else
-		status = usb_add_config(cdev, &serial_config_driver,
-				serial_bind_gser_config);
+		status = serial_register_ports(cdev, &serial_config_driver,
+				"obex");
+	else {
+		status = serial_register_ports(cdev, &serial_config_driver,
+				"gser");
+	}
 	if (status < 0)
 		goto fail;
 
@@ -257,9 +216,6 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 	return 0;
 
 fail:
-	cur_line--;
-	while (cur_line >= 0)
-		gserial_free_line(tty_lines[cur_line--]);
 	return status;
 }
 
@@ -270,7 +226,6 @@ static int gs_unbind(struct usb_composite_dev *cdev)
 	for (i = 0; i < n_ports; i++) {
 		usb_put_function(f_serial[i]);
 		usb_put_function_instance(fi_serial[i]);
-		gserial_free_line(tty_lines[i]);
 	}
 	return 0;
 }
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index a0aa721d8b21..4b76124ce96b 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -50,7 +50,6 @@
 
 struct eth_dev {
 	/* lock is held while accessing port_usb
-	 * or updating its backlink port_usb->ioport
 	 */
 	spinlock_t		lock;
 	struct gether		*port_usb;
@@ -729,8 +728,6 @@ static int get_ether_addr(const char *str, u8 *dev_addr)
 	return 1;
 }
 
-static struct eth_dev *the_dev;
-
 static const struct net_device_ops eth_netdev_ops = {
 	.ndo_open		= eth_open,
 	.ndo_stop		= eth_stop,
@@ -758,19 +755,16 @@ static struct device_type gadget_type = {
  *
  * Returns negative errno, or zero on success
  */
-int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
+struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 		const char *netname)
 {
 	struct eth_dev		*dev;
 	struct net_device	*net;
 	int			status;
 
-	if (the_dev)
-		return -EBUSY;
-
 	net = alloc_etherdev(sizeof *dev);
 	if (!net)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	dev = netdev_priv(net);
 	spin_lock_init(&dev->lock);
@@ -807,12 +801,11 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 	if (status < 0) {
 		dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
 		free_netdev(net);
+		dev = ERR_PTR(status);
 	} else {
 		INFO(dev, "MAC %pM\n", net->dev_addr);
 		INFO(dev, "HOST MAC %pM\n", dev->host_mac);
 
-		the_dev = dev;
-
 		/* two kinds of host-initiated state changes:
 		 *  - iff DATA transfer is active, carrier is "on"
 		 *  - tx queueing enabled if open *and* carrier is "on"
@@ -820,7 +813,7 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 		netif_carrier_off(net);
 	}
 
-	return status;
+	return dev;
 }
 
 /**
@@ -829,19 +822,16 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
  *
  * This is called to free all resources allocated by @gether_setup().
  */
-void gether_cleanup(void)
+void gether_cleanup(struct eth_dev *dev)
 {
-	if (!the_dev)
+	if (!dev)
 		return;
 
-	unregister_netdev(the_dev->net);
-	flush_work(&the_dev->work);
-	free_netdev(the_dev->net);
-
-	the_dev = NULL;
+	unregister_netdev(dev->net);
+	flush_work(&dev->work);
+	free_netdev(dev->net);
 }
 
-
 /**
  * gether_connect - notify network layer that USB link is active
  * @link: the USB link, set up with endpoints, descriptors matching
@@ -860,7 +850,7 @@ void gether_cleanup(void)
  */
 struct net_device *gether_connect(struct gether *link)
 {
-	struct eth_dev		*dev = the_dev;
+	struct eth_dev		*dev = link->ioport;
 	int			result = 0;
 
 	if (!dev)
@@ -895,7 +885,6 @@ struct net_device *gether_connect(struct gether *link)
 
 		spin_lock(&dev->lock);
 		dev->port_usb = link;
-		link->ioport = dev;
 		if (netif_running(dev->net)) {
 			if (link->open)
 				link->open(link);
@@ -989,6 +978,5 @@ void gether_disconnect(struct gether *link)
 
 	spin_lock(&dev->lock);
 	dev->port_usb = NULL;
-	link->ioport = NULL;
 	spin_unlock(&dev->lock);
 }
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index 6f4a1623d854..02522338a708 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -21,6 +21,7 @@
 
 #include "gadget_chips.h"
 
+struct eth_dev;
 
 /*
  * This represents the USB side of an "ethernet" link, managed by a USB
@@ -70,7 +71,7 @@ struct gether {
 			|USB_CDC_PACKET_TYPE_DIRECTED)
 
 /* variant of gether_setup that allows customizing network device name */
-int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
+struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 		const char *netname);
 
 /* netdev setup/teardown as directed by the gadget driver */
@@ -86,12 +87,13 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
  *
  * Returns negative errno, or zero on success
  */
-static inline int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
+static inline struct eth_dev *gether_setup(struct usb_gadget *g,
+		u8 ethaddr[ETH_ALEN])
 {
 	return gether_setup_name(g, ethaddr, "usb");
 }
 
-void gether_cleanup(void);
+void gether_cleanup(struct eth_dev *dev);
 
 /* connect/disconnect is handled by individual functions */
 struct net_device *gether_connect(struct gether *);
@@ -111,21 +113,24 @@ static inline bool can_support_ecm(struct usb_gadget *gadget)
 }
 
 /* each configuration may bind one instance of an ethernet link */
-int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
-int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
-int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
-int eem_bind_config(struct usb_configuration *c);
+int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+		struct eth_dev *dev);
+int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+		struct eth_dev *dev);
+int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+		struct eth_dev *dev);
+int eem_bind_config(struct usb_configuration *c, struct eth_dev *dev);
 
 #ifdef USB_ETH_RNDIS
 
 int rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
-				u32 vendorID, const char *manufacturer);
+		u32 vendorID, const char *manufacturer, struct eth_dev *dev);
 
 #else
 
 static inline int
 rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
-				u32 vendorID, const char *manufacturer)
+		u32 vendorID, const char *manufacturer, struct eth_dev *dev)
 {
 	return 0;
 }
@@ -145,9 +150,9 @@ rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
  * for calling @gether_cleanup() before module unload.
  */
 static inline int rndis_bind_config(struct usb_configuration *c,
-				    u8 ethaddr[ETH_ALEN])
+		u8 ethaddr[ETH_ALEN], struct eth_dev *dev)
 {
-	return rndis_bind_config_vendor(c, ethaddr, 0, NULL);
+	return rndis_bind_config_vendor(c, ethaddr, 0, NULL, dev);
 }
 
 
diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h
index 66ce73a00509..c20210c0babd 100644
--- a/drivers/usb/gadget/u_serial.h
+++ b/drivers/usb/gadget/u_serial.h
@@ -65,7 +65,6 @@ int gserial_connect(struct gserial *, u8 port_num);
 void gserial_disconnect(struct gserial *);
 
 /* functions are bound to configurations by a config or gadget driver */
-int acm_bind_config(struct usb_configuration *c, u8 port_num);
 int gser_bind_config(struct usb_configuration *c, u8 port_num);
 int obex_bind_config(struct usb_configuration *c, u8 port_num);
 
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index f8f62c3ed65e..ffd8fa541101 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -101,6 +101,16 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
 
 /* ------------------------------------------------------------------------- */
 
+void usb_gadget_set_state(struct usb_gadget *gadget,
+		enum usb_device_state state)
+{
+	gadget->state = state;
+	sysfs_notify(&gadget->dev.kobj, NULL, "status");
+}
+EXPORT_SYMBOL_GPL(usb_gadget_set_state);
+
+/* ------------------------------------------------------------------------- */
+
 /**
  * usb_gadget_udc_start - tells usb device controller to start up
  * @gadget: The gadget we want to get started
@@ -156,15 +166,23 @@ static void usb_udc_release(struct device *dev)
 }
 
 static const struct attribute_group *usb_udc_attr_groups[];
+
+static void usb_udc_nop_release(struct device *dev)
+{
+	dev_vdbg(dev, "%s\n", __func__);
+}
+
 /**
- * usb_add_gadget_udc - adds a new gadget to the udc class driver list
- * @parent: the parent device to this udc. Usually the controller
- * driver's device.
- * @gadget: the gadget to be added to the list
+ * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller driver's
+ * device.
+ * @gadget: the gadget to be added to the list.
+ * @release: a gadget release function.
  *
  * Returns zero on success, negative errno otherwise.
  */
-int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
+int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
+		void (*release)(struct device *dev))
 {
 	struct usb_udc		*udc;
 	int			ret = -ENOMEM;
@@ -173,6 +191,22 @@ int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
 	if (!udc)
 		goto err1;
 
+	dev_set_name(&gadget->dev, "gadget");
+	gadget->dev.parent = parent;
+
+	dma_set_coherent_mask(&gadget->dev, parent->coherent_dma_mask);
+	gadget->dev.dma_parms = parent->dma_parms;
+	gadget->dev.dma_mask = parent->dma_mask;
+
+	if (release)
+		gadget->dev.release = release;
+	else
+		gadget->dev.release = usb_udc_nop_release;
+
+	ret = device_register(&gadget->dev);
+	if (ret)
+		goto err2;
+
 	device_initialize(&udc->dev);
 	udc->dev.release = usb_udc_release;
 	udc->dev.class = udc_class;
@@ -180,7 +214,7 @@ int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
 	udc->dev.parent = parent;
 	ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj));
 	if (ret)
-		goto err2;
+		goto err3;
 
 	udc->gadget = gadget;
 
@@ -189,21 +223,42 @@ int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
 
 	ret = device_add(&udc->dev);
 	if (ret)
-		goto err3;
+		goto err4;
+
+	usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
 
 	mutex_unlock(&udc_lock);
 
 	return 0;
-err3:
+
+err4:
 	list_del(&udc->list);
 	mutex_unlock(&udc_lock);
 
-err2:
+err3:
 	put_device(&udc->dev);
 
+err2:
+	put_device(&gadget->dev);
+	kfree(udc);
+
 err1:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
+
+/**
+ * usb_add_gadget_udc - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller
+ * driver's device.
+ * @gadget: the gadget to be added to the list
+ *
+ * Returns zero on success, negative errno otherwise.
+ */
+int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
+{
+	return usb_add_gadget_udc_release(parent, gadget, NULL);
+}
 EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
 
 static void usb_gadget_remove_driver(struct usb_udc *udc)
@@ -220,6 +275,7 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
 
 	udc->driver = NULL;
 	udc->dev.driver = NULL;
+	udc->gadget->dev.driver = NULL;
 }
 
 /**
@@ -254,6 +310,7 @@ found:
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
 	device_unregister(&udc->dev);
+	device_unregister(&gadget->dev);
 }
 EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
 
@@ -268,6 +325,7 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri
 
 	udc->driver = driver;
 	udc->dev.driver = &driver->driver;
+	udc->gadget->dev.driver = &driver->driver;
 
 	ret = driver->bind(udc->gadget, driver);
 	if (ret)
@@ -286,6 +344,7 @@ err1:
 			udc->driver->function, ret);
 	udc->driver = NULL;
 	udc->dev.driver = NULL;
+	udc->gadget->dev.driver = NULL;
 	return ret;
 }
 
@@ -395,6 +454,16 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
 }
 static DEVICE_ATTR(soft_connect, S_IWUSR, NULL, usb_udc_softconn_store);
 
+static ssize_t usb_gadget_state_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	struct usb_gadget	*gadget = udc->gadget;
+
+	return sprintf(buf, "%s\n", usb_state_string(gadget->state));
+}
+static DEVICE_ATTR(state, S_IRUGO, usb_gadget_state_show, NULL);
+
 #define USB_UDC_SPEED_ATTR(name, param)					\
 ssize_t usb_udc_##param##_show(struct device *dev,			\
 		struct device_attribute *attr, char *buf)		\
@@ -403,7 +472,7 @@ ssize_t usb_udc_##param##_show(struct device *dev,			\
 	return snprintf(buf, PAGE_SIZE, "%s\n",				\
 			usb_speed_string(udc->gadget->param));		\
 }									\
-static DEVICE_ATTR(name, S_IRUSR, usb_udc_##param##_show, NULL)
+static DEVICE_ATTR(name, S_IRUGO, usb_udc_##param##_show, NULL)
 
 static USB_UDC_SPEED_ATTR(current_speed, speed);
 static USB_UDC_SPEED_ATTR(maximum_speed, max_speed);
@@ -428,6 +497,7 @@ static USB_UDC_ATTR(a_alt_hnp_support);
 static struct attribute *usb_udc_attrs[] = {
 	&dev_attr_srp.attr,
 	&dev_attr_soft_connect.attr,
+	&dev_attr_state.attr,
 	&dev_attr_current_speed.attr,
 	&dev_attr_maximum_speed.attr,
 
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 93b0c1191115..817e9e19cecf 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -98,8 +98,6 @@ extern unsigned int uvc_gadget_trace_param;
 #define DRIVER_VERSION				"0.1.0"
 #define DRIVER_VERSION_NUMBER			KERNEL_VERSION(0, 1, 0)
 
-#define DMA_ADDR_INVALID			(~(dma_addr_t)0)
-
 #define UVC_NUM_REQUESTS			4
 #define UVC_MAX_REQUEST_SIZE			64
 #define UVC_MAX_EVENTS				4
@@ -190,6 +188,7 @@ struct uvc_file_handle
  * Functions
  */
 
+extern void uvc_function_setup_continue(struct uvc_device *uvc);
 extern void uvc_endpoint_stream(struct uvc_device *dev);
 
 extern void uvc_function_connect(struct uvc_device *uvc);
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index 104ae9c81251..7ce27e35550b 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -10,6 +10,7 @@
  *	(at your option) any later version.
  */
 
+#include <linux/atomic.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/list.h>
@@ -18,7 +19,8 @@
 #include <linux/videodev2.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
-#include <linux/atomic.h>
+
+#include <media/videobuf2-vmalloc.h>
 
 #include "uvc.h"
 
@@ -28,330 +30,175 @@
  * Video queues is initialized by uvc_queue_init(). The function performs
  * basic initialization of the uvc_video_queue struct and never fails.
  *
- * Video buffer allocation and freeing are performed by uvc_alloc_buffers and
- * uvc_free_buffers respectively. The former acquires the video queue lock,
- * while the later must be called with the lock held (so that allocation can
- * free previously allocated buffers). Trying to free buffers that are mapped
- * to user space will return -EBUSY.
- *
- * Video buffers are managed using two queues. However, unlike most USB video
- * drivers that use an in queue and an out queue, we use a main queue to hold
- * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to
- * hold empty buffers. This design (copied from video-buf) minimizes locking
- * in interrupt, as only one queue is shared between interrupt and user
- * contexts.
- *
- * Use cases
- * ---------
- *
- * Unless stated otherwise, all operations that modify the irq buffers queue
- * are protected by the irq spinlock.
- *
- * 1. The user queues the buffers, starts streaming and dequeues a buffer.
- *
- *    The buffers are added to the main and irq queues. Both operations are
- *    protected by the queue lock, and the later is protected by the irq
- *    spinlock as well.
- *
- *    The completion handler fetches a buffer from the irq queue and fills it
- *    with video data. If no buffer is available (irq queue empty), the handler
- *    returns immediately.
- *
- *    When the buffer is full, the completion handler removes it from the irq
- *    queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue.
- *    At that point, any process waiting on the buffer will be woken up. If a
- *    process tries to dequeue a buffer after it has been marked ready, the
- *    dequeing will succeed immediately.
- *
- * 2. Buffers are queued, user is waiting on a buffer and the device gets
- *    disconnected.
- *
- *    When the device is disconnected, the kernel calls the completion handler
- *    with an appropriate status code. The handler marks all buffers in the
- *    irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so
- *    that any process waiting on a buffer gets woken up.
- *
- *    Waking up up the first buffer on the irq list is not enough, as the
- *    process waiting on the buffer might restart the dequeue operation
- *    immediately.
- *
+ * Video buffers are managed by videobuf2. The driver uses a mutex to protect
+ * the videobuf2 queue operations by serializing calls to videobuf2 and a
+ * spinlock to protect the IRQ queue that holds the buffers to be processed by
+ * the driver.
  */
 
-static void
-uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
-{
-	mutex_init(&queue->mutex);
-	spin_lock_init(&queue->irqlock);
-	INIT_LIST_HEAD(&queue->mainqueue);
-	INIT_LIST_HEAD(&queue->irqqueue);
-	queue->type = type;
-}
-
-/*
- * Free the video buffers.
- *
- * This function must be called with the queue lock held.
+/* -----------------------------------------------------------------------------
+ * videobuf2 queue operations
  */
-static int uvc_free_buffers(struct uvc_video_queue *queue)
+
+static int uvc_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+			   unsigned int *nbuffers, unsigned int *nplanes,
+			   unsigned int sizes[], void *alloc_ctxs[])
 {
-	unsigned int i;
+	struct uvc_video_queue *queue = vb2_get_drv_priv(vq);
+	struct uvc_video *video = container_of(queue, struct uvc_video, queue);
 
-	for (i = 0; i < queue->count; ++i) {
-		if (queue->buffer[i].vma_use_count != 0)
-			return -EBUSY;
-	}
+	if (*nbuffers > UVC_MAX_VIDEO_BUFFERS)
+		*nbuffers = UVC_MAX_VIDEO_BUFFERS;
 
-	if (queue->count) {
-		vfree(queue->mem);
-		queue->count = 0;
-	}
+	*nplanes = 1;
+
+	sizes[0] = video->imagesize;
 
 	return 0;
 }
 
-/*
- * Allocate the video buffers.
- *
- * Pages are reserved to make sure they will not be swapped, as they will be
- * filled in the URB completion handler.
- *
- * Buffers will be individually mapped, so they must all be page aligned.
- */
-static int
-uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
-		  unsigned int buflength)
+static int uvc_buffer_prepare(struct vb2_buffer *vb)
 {
-	unsigned int bufsize = PAGE_ALIGN(buflength);
-	unsigned int i;
-	void *mem = NULL;
-	int ret;
+	struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue);
+	struct uvc_buffer *buf = container_of(vb, struct uvc_buffer, buf);
 
-	if (nbuffers > UVC_MAX_VIDEO_BUFFERS)
-		nbuffers = UVC_MAX_VIDEO_BUFFERS;
+	if (vb->v4l2_buf.type == V4L2_BUF_TYPE_VIDEO_OUTPUT &&
+	    vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) {
+		uvc_trace(UVC_TRACE_CAPTURE, "[E] Bytes used out of bounds.\n");
+		return -EINVAL;
+	}
 
-	mutex_lock(&queue->mutex);
+	if (unlikely(queue->flags & UVC_QUEUE_DISCONNECTED))
+		return -ENODEV;
 
-	if ((ret = uvc_free_buffers(queue)) < 0)
-		goto done;
+	buf->state = UVC_BUF_STATE_QUEUED;
+	buf->mem = vb2_plane_vaddr(vb, 0);
+	buf->length = vb2_plane_size(vb, 0);
+	if (vb->v4l2_buf.type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		buf->bytesused = 0;
+	else
+		buf->bytesused = vb2_get_plane_payload(vb, 0);
 
-	/* Bail out if no buffers should be allocated. */
-	if (nbuffers == 0)
-		goto done;
+	return 0;
+}
 
-	/* Decrement the number of buffers until allocation succeeds. */
-	for (; nbuffers > 0; --nbuffers) {
-		mem = vmalloc_32(nbuffers * bufsize);
-		if (mem != NULL)
-			break;
-	}
+static void uvc_buffer_queue(struct vb2_buffer *vb)
+{
+	struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue);
+	struct uvc_buffer *buf = container_of(vb, struct uvc_buffer, buf);
+	unsigned long flags;
 
-	if (mem == NULL) {
-		ret = -ENOMEM;
-		goto done;
-	}
+	spin_lock_irqsave(&queue->irqlock, flags);
 
-	for (i = 0; i < nbuffers; ++i) {
-		memset(&queue->buffer[i], 0, sizeof queue->buffer[i]);
-		queue->buffer[i].buf.index = i;
-		queue->buffer[i].buf.m.offset = i * bufsize;
-		queue->buffer[i].buf.length = buflength;
-		queue->buffer[i].buf.type = queue->type;
-		queue->buffer[i].buf.sequence = 0;
-		queue->buffer[i].buf.field = V4L2_FIELD_NONE;
-		queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP;
-		queue->buffer[i].buf.flags = 0;
-		init_waitqueue_head(&queue->buffer[i].wait);
+	if (likely(!(queue->flags & UVC_QUEUE_DISCONNECTED))) {
+		list_add_tail(&buf->queue, &queue->irqqueue);
+	} else {
+		/* If the device is disconnected return the buffer to userspace
+		 * directly. The next QBUF call will fail with -ENODEV.
+		 */
+		buf->state = UVC_BUF_STATE_ERROR;
+		vb2_buffer_done(&buf->buf, VB2_BUF_STATE_ERROR);
 	}
 
-	queue->mem = mem;
-	queue->count = nbuffers;
-	queue->buf_size = bufsize;
-	ret = nbuffers;
-
-done:
-	mutex_unlock(&queue->mutex);
-	return ret;
+	spin_unlock_irqrestore(&queue->irqlock, flags);
 }
 
-static void __uvc_query_buffer(struct uvc_buffer *buf,
-		struct v4l2_buffer *v4l2_buf)
-{
-	memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf);
-
-	if (buf->vma_use_count)
-		v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED;
-
-	switch (buf->state) {
-	case UVC_BUF_STATE_ERROR:
-	case UVC_BUF_STATE_DONE:
-		v4l2_buf->flags |= V4L2_BUF_FLAG_DONE;
-		break;
-	case UVC_BUF_STATE_QUEUED:
-	case UVC_BUF_STATE_ACTIVE:
-		v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
-		break;
-	case UVC_BUF_STATE_IDLE:
-	default:
-		break;
-	}
-}
+static struct vb2_ops uvc_queue_qops = {
+	.queue_setup = uvc_queue_setup,
+	.buf_prepare = uvc_buffer_prepare,
+	.buf_queue = uvc_buffer_queue,
+};
 
-static int
-uvc_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf)
+static int uvc_queue_init(struct uvc_video_queue *queue,
+			  enum v4l2_buf_type type)
 {
-	int ret = 0;
+	int ret;
 
-	mutex_lock(&queue->mutex);
-	if (v4l2_buf->index >= queue->count) {
-		ret = -EINVAL;
-		goto done;
-	}
+	queue->queue.type = type;
+	queue->queue.io_modes = VB2_MMAP | VB2_USERPTR;
+	queue->queue.drv_priv = queue;
+	queue->queue.buf_struct_size = sizeof(struct uvc_buffer);
+	queue->queue.ops = &uvc_queue_qops;
+	queue->queue.mem_ops = &vb2_vmalloc_memops;
+	ret = vb2_queue_init(&queue->queue);
+	if (ret)
+		return ret;
+
+	mutex_init(&queue->mutex);
+	spin_lock_init(&queue->irqlock);
+	INIT_LIST_HEAD(&queue->irqqueue);
+	queue->flags = 0;
 
-	__uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf);
+	return 0;
+}
 
-done:
+/*
+ * Free the video buffers.
+ */
+static void uvc_free_buffers(struct uvc_video_queue *queue)
+{
+	mutex_lock(&queue->mutex);
+	vb2_queue_release(&queue->queue);
 	mutex_unlock(&queue->mutex);
-	return ret;
 }
 
 /*
- * Queue a video buffer. Attempting to queue a buffer that has already been
- * queued will return -EINVAL.
+ * Allocate the video buffers.
  */
-static int
-uvc_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf)
+static int uvc_alloc_buffers(struct uvc_video_queue *queue,
+			     struct v4l2_requestbuffers *rb)
 {
-	struct uvc_buffer *buf;
-	unsigned long flags;
-	int ret = 0;
+	int ret;
 
-	uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index);
+	mutex_lock(&queue->mutex);
+	ret = vb2_reqbufs(&queue->queue, rb);
+	mutex_unlock(&queue->mutex);
 
-	if (v4l2_buf->type != queue->type ||
-	    v4l2_buf->memory != V4L2_MEMORY_MMAP) {
-		uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) "
-			"and/or memory (%u).\n", v4l2_buf->type,
-			v4l2_buf->memory);
-		return -EINVAL;
-	}
+	return ret ? ret : rb->count;
+}
 
-	mutex_lock(&queue->mutex);
-	if (v4l2_buf->index >= queue->count) {
-		uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n");
-		ret = -EINVAL;
-		goto done;
-	}
+static int uvc_query_buffer(struct uvc_video_queue *queue,
+			    struct v4l2_buffer *buf)
+{
+	int ret;
 
-	buf = &queue->buffer[v4l2_buf->index];
-	if (buf->state != UVC_BUF_STATE_IDLE) {
-		uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state "
-			"(%u).\n", buf->state);
-		ret = -EINVAL;
-		goto done;
-	}
+	mutex_lock(&queue->mutex);
+	ret = vb2_querybuf(&queue->queue, buf);
+	mutex_unlock(&queue->mutex);
 
-	if (v4l2_buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT &&
-	    v4l2_buf->bytesused > buf->buf.length) {
-		uvc_trace(UVC_TRACE_CAPTURE, "[E] Bytes used out of bounds.\n");
-		ret = -EINVAL;
-		goto done;
-	}
+	return ret;
+}
 
-	if (v4l2_buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		buf->buf.bytesused = 0;
-	else
-		buf->buf.bytesused = v4l2_buf->bytesused;
+static int uvc_queue_buffer(struct uvc_video_queue *queue,
+			    struct v4l2_buffer *buf)
+{
+	unsigned long flags;
+	int ret;
 
+	mutex_lock(&queue->mutex);
+	ret = vb2_qbuf(&queue->queue, buf);
 	spin_lock_irqsave(&queue->irqlock, flags);
-	if (queue->flags & UVC_QUEUE_DISCONNECTED) {
-		spin_unlock_irqrestore(&queue->irqlock, flags);
-		ret = -ENODEV;
-		goto done;
-	}
-	buf->state = UVC_BUF_STATE_QUEUED;
-
 	ret = (queue->flags & UVC_QUEUE_PAUSED) != 0;
 	queue->flags &= ~UVC_QUEUE_PAUSED;
-
-	list_add_tail(&buf->stream, &queue->mainqueue);
-	list_add_tail(&buf->queue, &queue->irqqueue);
 	spin_unlock_irqrestore(&queue->irqlock, flags);
-
-done:
 	mutex_unlock(&queue->mutex);
-	return ret;
-}
 
-static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking)
-{
-	if (nonblocking) {
-		return (buf->state != UVC_BUF_STATE_QUEUED &&
-			buf->state != UVC_BUF_STATE_ACTIVE)
-			? 0 : -EAGAIN;
-	}
-
-	return wait_event_interruptible(buf->wait,
-		buf->state != UVC_BUF_STATE_QUEUED &&
-		buf->state != UVC_BUF_STATE_ACTIVE);
+	return ret;
 }
 
 /*
  * Dequeue a video buffer. If nonblocking is false, block until a buffer is
  * available.
  */
-static int
-uvc_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf,
-		   int nonblocking)
+static int uvc_dequeue_buffer(struct uvc_video_queue *queue,
+			      struct v4l2_buffer *buf, int nonblocking)
 {
-	struct uvc_buffer *buf;
-	int ret = 0;
-
-	if (v4l2_buf->type != queue->type ||
-	    v4l2_buf->memory != V4L2_MEMORY_MMAP) {
-		uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) "
-			"and/or memory (%u).\n", v4l2_buf->type,
-			v4l2_buf->memory);
-		return -EINVAL;
-	}
+	int ret;
 
 	mutex_lock(&queue->mutex);
-	if (list_empty(&queue->mainqueue)) {
-		uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n");
-		ret = -EINVAL;
-		goto done;
-	}
-
-	buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream);
-	if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0)
-		goto done;
-
-	uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n",
-		buf->buf.index, buf->state, buf->buf.bytesused);
-
-	switch (buf->state) {
-	case UVC_BUF_STATE_ERROR:
-		uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data "
-			"(transmission error).\n");
-		ret = -EIO;
-	case UVC_BUF_STATE_DONE:
-		buf->state = UVC_BUF_STATE_IDLE;
-		break;
-
-	case UVC_BUF_STATE_IDLE:
-	case UVC_BUF_STATE_QUEUED:
-	case UVC_BUF_STATE_ACTIVE:
-	default:
-		uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u "
-			"(driver bug?).\n", buf->state);
-		ret = -EINVAL;
-		goto done;
-	}
-
-	list_del(&buf->stream);
-	__uvc_query_buffer(buf, v4l2_buf);
-
-done:
+	ret = vb2_dqbuf(&queue->queue, buf, nonblocking);
 	mutex_unlock(&queue->mutex);
+
 	return ret;
 }
 
@@ -361,105 +208,47 @@ done:
  * This function implements video queue polling and is intended to be used by
  * the device poll handler.
  */
-static unsigned int
-uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
-	       poll_table *wait)
+static unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
+				   struct file *file, poll_table *wait)
 {
-	struct uvc_buffer *buf;
-	unsigned int mask = 0;
+	unsigned int ret;
 
 	mutex_lock(&queue->mutex);
-	if (list_empty(&queue->mainqueue))
-		goto done;
-
-	buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream);
-
-	poll_wait(file, &buf->wait, wait);
-	if (buf->state == UVC_BUF_STATE_DONE ||
-	    buf->state == UVC_BUF_STATE_ERROR)
-		mask |= POLLOUT | POLLWRNORM;
-
-done:
+	ret = vb2_poll(&queue->queue, file, wait);
 	mutex_unlock(&queue->mutex);
-	return mask;
-}
 
-/*
- * VMA operations.
- */
-static void uvc_vm_open(struct vm_area_struct *vma)
-{
-	struct uvc_buffer *buffer = vma->vm_private_data;
-	buffer->vma_use_count++;
+	return ret;
 }
 
-static void uvc_vm_close(struct vm_area_struct *vma)
+static int uvc_queue_mmap(struct uvc_video_queue *queue,
+			  struct vm_area_struct *vma)
 {
-	struct uvc_buffer *buffer = vma->vm_private_data;
-	buffer->vma_use_count--;
-}
+	int ret;
 
-static struct vm_operations_struct uvc_vm_ops = {
-	.open		= uvc_vm_open,
-	.close		= uvc_vm_close,
-};
+	mutex_lock(&queue->mutex);
+	ret = vb2_mmap(&queue->queue, vma);
+	mutex_unlock(&queue->mutex);
+
+	return ret;
+}
 
+#ifndef CONFIG_MMU
 /*
- * Memory-map a buffer.
+ * Get unmapped area.
  *
- * This function implements video buffer memory mapping and is intended to be
- * used by the device mmap handler.
+ * NO-MMU arch need this function to make mmap() work correctly.
  */
-static int
-uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+static unsigned long uvc_queue_get_unmapped_area(struct uvc_video_queue *queue,
+		unsigned long pgoff)
 {
-	struct uvc_buffer *uninitialized_var(buffer);
-	struct page *page;
-	unsigned long addr, start, size;
-	unsigned int i;
-	int ret = 0;
-
-	start = vma->vm_start;
-	size = vma->vm_end - vma->vm_start;
+	unsigned long ret;
 
 	mutex_lock(&queue->mutex);
-
-	for (i = 0; i < queue->count; ++i) {
-		buffer = &queue->buffer[i];
-		if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
-			break;
-	}
-
-	if (i == queue->count || size != queue->buf_size) {
-		ret = -EINVAL;
-		goto done;
-	}
-
-	/*
-	 * VM_IO marks the area as being an mmaped region for I/O to a
-	 * device. It also prevents the region from being core dumped.
-	 */
-	vma->vm_flags |= VM_IO;
-
-	addr = (unsigned long)queue->mem + buffer->buf.m.offset;
-	while (size > 0) {
-		page = vmalloc_to_page((void *)addr);
-		if ((ret = vm_insert_page(vma, start, page)) < 0)
-			goto done;
-
-		start += PAGE_SIZE;
-		addr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	vma->vm_ops = &uvc_vm_ops;
-	vma->vm_private_data = buffer;
-	uvc_vm_open(vma);
-
-done:
+	ret = vb2_get_unmapped_area(&queue->queue, 0, 0, pgoff, 0);
 	mutex_unlock(&queue->mutex);
 	return ret;
 }
+#endif
 
 /*
  * Cancel the video buffers queue.
@@ -484,7 +273,7 @@ static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
 				       queue);
 		list_del(&buf->queue);
 		buf->state = UVC_BUF_STATE_ERROR;
-		wake_up(&buf->wait);
+		vb2_buffer_done(&buf->buf, VB2_BUF_STATE_ERROR);
 	}
 	/* This must be protected by the irqlock spinlock to avoid race
 	 * conditions between uvc_queue_buffer and the disconnection event that
@@ -516,26 +305,33 @@ static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
  */
 static int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
 {
-	unsigned int i;
+	unsigned long flags;
 	int ret = 0;
 
 	mutex_lock(&queue->mutex);
 	if (enable) {
-		if (uvc_queue_streaming(queue)) {
-			ret = -EBUSY;
+		ret = vb2_streamon(&queue->queue, queue->queue.type);
+		if (ret < 0)
 			goto done;
-		}
+
 		queue->sequence = 0;
-		queue->flags |= UVC_QUEUE_STREAMING;
 		queue->buf_used = 0;
 	} else {
-		uvc_queue_cancel(queue, 0);
-		INIT_LIST_HEAD(&queue->mainqueue);
+		ret = vb2_streamoff(&queue->queue, queue->queue.type);
+		if (ret < 0)
+			goto done;
 
-		for (i = 0; i < queue->count; ++i)
-			queue->buffer[i].state = UVC_BUF_STATE_IDLE;
+		spin_lock_irqsave(&queue->irqlock, flags);
+		INIT_LIST_HEAD(&queue->irqqueue);
 
-		queue->flags &= ~UVC_QUEUE_STREAMING;
+		/*
+		 * FIXME: We need to clear the DISCONNECTED flag to ensure that
+		 * applications will be able to queue buffers for the next
+		 * streaming run. However, clearing it here doesn't guarantee
+		 * that the device will be reconnected in the meantime.
+		 */
+		queue->flags &= ~UVC_QUEUE_DISCONNECTED;
+		spin_unlock_irqrestore(&queue->irqlock, flags);
 	}
 
 done:
@@ -544,15 +340,15 @@ done:
 }
 
 /* called with &queue_irqlock held.. */
-static struct uvc_buffer *
-uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
+static struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
+						struct uvc_buffer *buf)
 {
 	struct uvc_buffer *nextbuf;
 
 	if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
-	    buf->buf.length != buf->buf.bytesused) {
+	     buf->length != buf->bytesused) {
 		buf->state = UVC_BUF_STATE_QUEUED;
-		buf->buf.bytesused = 0;
+		vb2_set_plane_payload(&buf->buf, 0, 0);
 		return buf;
 	}
 
@@ -563,10 +359,18 @@ uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
 	else
 		nextbuf = NULL;
 
-	buf->buf.sequence = queue->sequence++;
-	do_gettimeofday(&buf->buf.timestamp);
+	/*
+	 * FIXME: with videobuf2, the sequence number or timestamp fields
+	 * are valid only for video capture devices and the UVC gadget usually
+	 * is a video output device. Keeping these until the specs are clear on
+	 * this aspect.
+	 */
+	buf->buf.v4l2_buf.sequence = queue->sequence++;
+	do_gettimeofday(&buf->buf.v4l2_buf.timestamp);
+
+	vb2_set_plane_payload(&buf->buf, 0, buf->bytesused);
+	vb2_buffer_done(&buf->buf, VB2_BUF_STATE_DONE);
 
-	wake_up(&buf->wait);
 	return nextbuf;
 }
 
diff --git a/drivers/usb/gadget/uvc_queue.h b/drivers/usb/gadget/uvc_queue.h
index 1812a8ecc5d0..8e76ce982f1e 100644
--- a/drivers/usb/gadget/uvc_queue.h
+++ b/drivers/usb/gadget/uvc_queue.h
@@ -6,6 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/poll.h>
 #include <linux/videodev2.h>
+#include <media/videobuf2-core.h>
 
 /* Maximum frame size in bytes, for sanity checking. */
 #define UVC_MAX_FRAME_SIZE	(16*1024*1024)
@@ -25,42 +26,35 @@ enum uvc_buffer_state {
 };
 
 struct uvc_buffer {
-	unsigned long vma_use_count;
-	struct list_head stream;
-
-	/* Touched by interrupt handler. */
-	struct v4l2_buffer buf;
+	struct vb2_buffer buf;
 	struct list_head queue;
-	wait_queue_head_t wait;
+
 	enum uvc_buffer_state state;
+	void *mem;
+	unsigned int length;
+	unsigned int bytesused;
 };
 
-#define UVC_QUEUE_STREAMING		(1 << 0)
-#define UVC_QUEUE_DISCONNECTED		(1 << 1)
-#define UVC_QUEUE_DROP_INCOMPLETE	(1 << 2)
-#define UVC_QUEUE_PAUSED		(1 << 3)
+#define UVC_QUEUE_DISCONNECTED		(1 << 0)
+#define UVC_QUEUE_DROP_INCOMPLETE	(1 << 1)
+#define UVC_QUEUE_PAUSED		(1 << 2)
 
 struct uvc_video_queue {
-	enum v4l2_buf_type type;
+	struct vb2_queue queue;
+	struct mutex mutex;	/* Protects queue */
 
-	void *mem;
 	unsigned int flags;
 	__u32 sequence;
 
-	unsigned int count;
-	unsigned int buf_size;
 	unsigned int buf_used;
-	struct uvc_buffer buffer[UVC_MAX_VIDEO_BUFFERS];
-	struct mutex mutex;	/* protects buffers and mainqueue */
-	spinlock_t irqlock;	/* protects irqqueue */
 
-	struct list_head mainqueue;
+	spinlock_t irqlock;	/* Protects flags and irqqueue */
 	struct list_head irqqueue;
 };
 
 static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
 {
-	return queue->flags & UVC_QUEUE_STREAMING;
+	return vb2_is_streaming(&queue->queue);
 }
 
 #endif /* __KERNEL__ */
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index 2ca9386d655b..ad48e81155e2 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -41,9 +41,8 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
 
 	req->length = min_t(unsigned int, uvc->event_length, data->length);
 	req->zero = data->length < uvc->event_length;
-	req->dma = DMA_ADDR_INVALID;
 
-	memcpy(req->buf, data->data, data->length);
+	memcpy(req->buf, data->data, req->length);
 
 	return usb_ep_queue(cdev->gadget->ep0, req, GFP_KERNEL);
 }
@@ -148,16 +147,13 @@ uvc_v4l2_release(struct file *file)
 	uvc_function_disconnect(uvc);
 
 	uvc_video_enable(video, 0);
-	mutex_lock(&video->queue.mutex);
-	if (uvc_free_buffers(&video->queue) < 0)
-		printk(KERN_ERR "uvc_v4l2_release: Unable to free "
-				"buffers.\n");
-	mutex_unlock(&video->queue.mutex);
+	uvc_free_buffers(&video->queue);
 
 	file->private_data = NULL;
 	v4l2_fh_del(&handle->vfh);
 	v4l2_fh_exit(&handle->vfh);
 	kfree(handle);
+
 	return 0;
 }
 
@@ -178,9 +174,9 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		struct v4l2_capability *cap = arg;
 
 		memset(cap, 0, sizeof *cap);
-		strncpy(cap->driver, "g_uvc", sizeof(cap->driver));
-		strncpy(cap->card, cdev->gadget->name, sizeof(cap->card));
-		strncpy(cap->bus_info, dev_name(&cdev->gadget->dev),
+		strlcpy(cap->driver, "g_uvc", sizeof(cap->driver));
+		strlcpy(cap->card, cdev->gadget->name, sizeof(cap->card));
+		strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev),
 			sizeof cap->bus_info);
 		cap->version = DRIVER_VERSION_NUMBER;
 		cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
@@ -192,7 +188,7 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	{
 		struct v4l2_format *fmt = arg;
 
-		if (fmt->type != video->queue.type)
+		if (fmt->type != video->queue.queue.type)
 			return -EINVAL;
 
 		return uvc_v4l2_get_format(video, fmt);
@@ -202,7 +198,7 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	{
 		struct v4l2_format *fmt = arg;
 
-		if (fmt->type != video->queue.type)
+		if (fmt->type != video->queue.queue.type)
 			return -EINVAL;
 
 		return uvc_v4l2_set_format(video, fmt);
@@ -213,16 +209,13 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	{
 		struct v4l2_requestbuffers *rb = arg;
 
-		if (rb->type != video->queue.type ||
-		    rb->memory != V4L2_MEMORY_MMAP)
+		if (rb->type != video->queue.queue.type)
 			return -EINVAL;
 
-		ret = uvc_alloc_buffers(&video->queue, rb->count,
-					video->imagesize);
+		ret = uvc_alloc_buffers(&video->queue, rb);
 		if (ret < 0)
 			return ret;
 
-		rb->count = ret;
 		ret = 0;
 		break;
 	}
@@ -231,9 +224,6 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	{
 		struct v4l2_buffer *buf = arg;
 
-		if (buf->type != video->queue.type)
-			return -EINVAL;
-
 		return uvc_query_buffer(&video->queue, buf);
 	}
 
@@ -251,24 +241,36 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	{
 		int *type = arg;
 
-		if (*type != video->queue.type)
+		if (*type != video->queue.queue.type)
 			return -EINVAL;
 
-		return uvc_video_enable(video, 1);
+		/* Enable UVC video. */
+		ret = uvc_video_enable(video, 1);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * Complete the alternate setting selection setup phase now that
+		 * userspace is ready to provide video frames.
+		 */
+		uvc_function_setup_continue(uvc);
+		uvc->state = UVC_STATE_STREAMING;
+
+		return 0;
 	}
 
 	case VIDIOC_STREAMOFF:
 	{
 		int *type = arg;
 
-		if (*type != video->queue.type)
+		if (*type != video->queue.queue.type)
 			return -EINVAL;
 
 		return uvc_video_enable(video, 0);
 	}
 
 	/* Events */
-        case VIDIOC_DQEVENT:
+	case VIDIOC_DQEVENT:
 	{
 		struct v4l2_event *event = arg;
 
@@ -333,17 +335,21 @@ uvc_v4l2_poll(struct file *file, poll_table *wait)
 {
 	struct video_device *vdev = video_devdata(file);
 	struct uvc_device *uvc = video_get_drvdata(vdev);
-	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
-	unsigned int mask = 0;
 
-	poll_wait(file, &handle->vfh.wait, wait);
-	if (v4l2_event_pending(&handle->vfh))
-		mask |= POLLPRI;
+	return uvc_queue_poll(&uvc->video.queue, file, wait);
+}
 
-	mask |= uvc_queue_poll(&uvc->video.queue, file, wait);
+#ifndef CONFIG_MMU
+static unsigned long uvc_v4l2_get_unmapped_area(struct file *file,
+		unsigned long addr, unsigned long len, unsigned long pgoff,
+		unsigned long flags)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
 
-	return mask;
+	return uvc_queue_get_unmapped_area(&uvc->video.queue, pgoff);
 }
+#endif
 
 static struct v4l2_file_operations uvc_v4l2_fops = {
 	.owner		= THIS_MODULE,
@@ -352,5 +358,8 @@ static struct v4l2_file_operations uvc_v4l2_fops = {
 	.ioctl		= uvc_v4l2_ioctl,
 	.mmap		= uvc_v4l2_mmap,
 	.poll		= uvc_v4l2_poll,
+#ifndef CONFIG_MMU
+	.get_unmapped_area = uvc_v4l2_get_unmapped_area,
+#endif
 };
 
diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c
index b0e53a8ea4f7..71e896d4c5ae 100644
--- a/drivers/usb/gadget/uvc_video.c
+++ b/drivers/usb/gadget/uvc_video.c
@@ -32,7 +32,7 @@ uvc_video_encode_header(struct uvc_video *video, struct uvc_buffer *buf,
 	data[0] = 2;
 	data[1] = UVC_STREAM_EOH | video->fid;
 
-	if (buf->buf.bytesused - video->queue.buf_used <= len - 2)
+	if (buf->bytesused - video->queue.buf_used <= len - 2)
 		data[1] |= UVC_STREAM_EOF;
 
 	return 2;
@@ -47,8 +47,8 @@ uvc_video_encode_data(struct uvc_video *video, struct uvc_buffer *buf,
 	void *mem;
 
 	/* Copy video data to the USB buffer. */
-	mem = queue->mem + buf->buf.m.offset + queue->buf_used;
-	nbytes = min((unsigned int)len, buf->buf.bytesused - queue->buf_used);
+	mem = buf->mem + queue->buf_used;
+	nbytes = min((unsigned int)len, buf->bytesused - queue->buf_used);
 
 	memcpy(data, mem, nbytes);
 	queue->buf_used += nbytes;
@@ -82,7 +82,7 @@ uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
 	req->length = video->req_size - len;
 	req->zero = video->payload_size == video->max_payload_size;
 
-	if (buf->buf.bytesused == video->queue.buf_used) {
+	if (buf->bytesused == video->queue.buf_used) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		uvc_queue_next_buffer(&video->queue, buf);
@@ -92,7 +92,7 @@ uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
 	}
 
 	if (video->payload_size == video->max_payload_size ||
-	    buf->buf.bytesused == video->queue.buf_used)
+	    buf->bytesused == video->queue.buf_used)
 		video->payload_size = 0;
 }
 
@@ -115,7 +115,7 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
 
 	req->length = video->req_size - len;
 
-	if (buf->buf.bytesused == video->queue.buf_used) {
+	if (buf->bytesused == video->queue.buf_used) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		uvc_queue_next_buffer(&video->queue, buf);
@@ -161,6 +161,7 @@ static void
 uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 {
 	struct uvc_video *video = req->context;
+	struct uvc_video_queue *queue = &video->queue;
 	struct uvc_buffer *buf;
 	unsigned long flags;
 	int ret;
@@ -169,13 +170,15 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 	case 0:
 		break;
 
-	case -ESHUTDOWN:
+	case -ESHUTDOWN:	/* disconnect from host. */
 		printk(KERN_INFO "VS request cancelled.\n");
+		uvc_queue_cancel(queue, 1);
 		goto requeue;
 
 	default:
 		printk(KERN_INFO "VS request completed with status %d.\n",
 			req->status);
+		uvc_queue_cancel(queue, 0);
 		goto requeue;
 	}
 
@@ -229,13 +232,18 @@ uvc_video_free_requests(struct uvc_video *video)
 static int
 uvc_video_alloc_requests(struct uvc_video *video)
 {
+	unsigned int req_size;
 	unsigned int i;
 	int ret = -ENOMEM;
 
 	BUG_ON(video->req_size);
 
+	req_size = video->ep->maxpacket
+		 * max_t(unsigned int, video->ep->maxburst, 1)
+		 * (video->ep->mult + 1);
+
 	for (i = 0; i < UVC_NUM_REQUESTS; ++i) {
-		video->req_buffer[i] = kmalloc(video->ep->maxpacket, GFP_KERNEL);
+		video->req_buffer[i] = kmalloc(req_size, GFP_KERNEL);
 		if (video->req_buffer[i] == NULL)
 			goto error;
 
@@ -245,14 +253,14 @@ uvc_video_alloc_requests(struct uvc_video *video)
 
 		video->req[i]->buf = video->req_buffer[i];
 		video->req[i]->length = 0;
-		video->req[i]->dma = DMA_ADDR_INVALID;
 		video->req[i]->complete = uvc_video_complete;
 		video->req[i]->context = video;
 
 		list_add_tail(&video->req[i]->list, &video->req_free);
 	}
 
-	video->req_size = video->ep->maxpacket;
+	video->req_size = req_size;
+
 	return 0;
 
 error:
@@ -309,7 +317,8 @@ uvc_video_pump(struct uvc_video *video)
 		video->encode(req, video, buf);
 
 		/* Queue the USB request */
-		if ((ret = usb_ep_queue(video->ep, req, GFP_KERNEL)) < 0) {
+		ret = usb_ep_queue(video->ep, req, GFP_ATOMIC);
+		if (ret < 0) {
 			printk(KERN_INFO "Failed to queue request (%d)\n", ret);
 			usb_ep_set_halt(video->ep);
 			spin_unlock_irqrestore(&video->queue.irqlock, flags);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2f682219e257..f7af0984743b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -180,6 +180,7 @@ config USB_EHCI_TEGRA
        boolean "NVIDIA Tegra HCD support"
        depends on USB_EHCI_HCD && ARCH_TEGRA
        select USB_EHCI_ROOT_HUB_TT
+       select USB_PHY
        help
          This driver enables support for the internal USB Host Controllers
          found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
@@ -301,7 +302,6 @@ config USB_OHCI_HCD
 	tristate "OHCI HCD support"
 	depends on USB && USB_ARCH_HAS_OHCI
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
-	select USB_OTG_UTILS if ARCH_OMAP
 	depends on USB_ISP1301 || !ARCH_LPC32XX
 	---help---
 	  The Open Host Controller Interface (OHCI) is a standard for accessing
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 88a49c87e748..ebf410311957 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -145,7 +145,7 @@ static int ehci_msm_probe(struct platform_device *pdev)
 	 * management.
 	 */
 	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(phy)) {
+	if (IS_ERR(phy)) {
 		dev_err(&pdev->dev, "unable to find transceiver\n");
 		ret = -ENODEV;
 		goto put_hcd;
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 5cd9f96ed92d..402062973f03 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -33,25 +33,17 @@ struct ehci_hcd_mv {
 
 	struct mv_usb_platform_data *pdata;
 
-	/* clock source and total clock number */
-	unsigned int clknum;
-	struct clk *clk[0];
+	struct clk *clk;
 };
 
 static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
 {
-	unsigned int i;
-
-	for (i = 0; i < ehci_mv->clknum; i++)
-		clk_prepare_enable(ehci_mv->clk[i]);
+	clk_prepare_enable(ehci_mv->clk);
 }
 
 static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
 {
-	unsigned int i;
-
-	for (i = 0; i < ehci_mv->clknum; i++)
-		clk_disable_unprepare(ehci_mv->clk[i]);
+	clk_disable_unprepare(ehci_mv->clk);
 }
 
 static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
@@ -144,9 +136,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	struct ehci_hcd *ehci;
 	struct ehci_hcd_mv *ehci_mv;
 	struct resource *r;
-	int clk_i, retval = -ENODEV;
+	int retval = -ENODEV;
 	u32 offset;
-	size_t size;
 
 	if (!pdata) {
 		dev_err(&pdev->dev, "missing platform_data\n");
@@ -160,8 +151,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	if (!hcd)
 		return -ENOMEM;
 
-	size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum;
-	ehci_mv = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	ehci_mv = devm_kzalloc(&pdev->dev, sizeof(*ehci_mv), GFP_KERNEL);
 	if (ehci_mv == NULL) {
 		dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n");
 		retval = -ENOMEM;
@@ -172,16 +162,11 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	ehci_mv->pdata = pdata;
 	ehci_mv->hcd = hcd;
 
-	ehci_mv->clknum = pdata->clknum;
-	for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) {
-		ehci_mv->clk[clk_i] =
-		    devm_clk_get(&pdev->dev, pdata->clkname[clk_i]);
-		if (IS_ERR(ehci_mv->clk[clk_i])) {
-			dev_err(&pdev->dev, "error get clck \"%s\"\n",
-				pdata->clkname[clk_i]);
-			retval = PTR_ERR(ehci_mv->clk[clk_i]);
-			goto err_clear_drvdata;
-		}
+	ehci_mv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ehci_mv->clk)) {
+		dev_err(&pdev->dev, "error getting clock\n");
+		retval = PTR_ERR(ehci_mv->clk);
+		goto err_clear_drvdata;
 	}
 
 	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
@@ -240,12 +225,16 @@ static int mv_ehci_probe(struct platform_device *pdev)
 
 	ehci_mv->mode = pdata->mode;
 	if (ehci_mv->mode == MV_USB_MODE_OTG) {
-#ifdef CONFIG_USB_OTG_UTILS
 		ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-		if (IS_ERR_OR_NULL(ehci_mv->otg)) {
-			dev_err(&pdev->dev,
-				"unable to find transceiver\n");
-			retval = -ENODEV;
+		if (IS_ERR(ehci_mv->otg)) {
+			retval = PTR_ERR(ehci_mv->otg);
+
+			if (retval == -ENXIO)
+				dev_info(&pdev->dev, "MV_USB_MODE_OTG "
+						"must have CONFIG_USB_PHY enabled\n");
+			else
+				dev_err(&pdev->dev,
+						"unable to find transceiver\n");
 			goto err_disable_clk;
 		}
 
@@ -258,11 +247,6 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		}
 		/* otg will enable clock before use as host */
 		mv_ehci_disable(ehci_mv);
-#else
-		dev_info(&pdev->dev, "MV_USB_MODE_OTG "
-			 "must have CONFIG_USB_OTG_UTILS enabled\n");
-		goto err_disable_clk;
-#endif
 	} else {
 		if (pdata->set_vbus)
 			pdata->set_vbus(1);
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 738490e6d429..43a2a16732f5 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -140,7 +140,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(phy)) {
+	if (IS_ERR(phy)) {
 		/* Fallback to pdata */
 		if (!pdata) {
 			dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 4f3cfb83f862..ed201ae879cb 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -773,16 +773,14 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 		goto fail_phy;
 	}
 
-#ifdef CONFIG_USB_OTG_UTILS
 	if (pdata->operating_mode == TEGRA_USB_OTG) {
 		tegra->transceiver =
 			devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-		if (!IS_ERR_OR_NULL(tegra->transceiver))
+		if (!IS_ERR(tegra->transceiver))
 			otg_set_host(tegra->transceiver->otg, &hcd->self);
 	} else {
 		tegra->transceiver = ERR_PTR(-ENODEV);
 	}
-#endif
 
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err) {
@@ -801,10 +799,8 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 	return err;
 
 fail:
-#ifdef CONFIG_USB_OTG_UTILS
-	if (!IS_ERR_OR_NULL(tegra->transceiver))
+	if (!IS_ERR(tegra->transceiver))
 		otg_set_host(tegra->transceiver->otg, NULL);
-#endif
 fail_phy:
 	usb_phy_shutdown(hcd->phy);
 fail_io:
@@ -823,10 +819,8 @@ static int tegra_ehci_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 
-#ifdef CONFIG_USB_OTG_UTILS
-	if (!IS_ERR_OR_NULL(tegra->transceiver))
+	if (!IS_ERR(tegra->transceiver))
 		otg_set_host(tegra->transceiver->otg, NULL);
-#endif
 
 	usb_phy_shutdown(hcd->phy);
 	usb_remove_hcd(hcd);
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index e3b7e85120e4..4b469e050208 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -128,7 +128,7 @@ static int exynos_ohci_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(phy)) {
+	if (IS_ERR(phy)) {
 		/* Fallback to pdata */
 		if (!pdata) {
 			dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 05e51432dd2f..47442d35b6fc 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -7,7 +7,6 @@
 config USB_MUSB_HDRC
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	depends on USB && USB_GADGET
-	select USB_OTG_UTILS
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on the Mentor Graphics silicon IP.  Then
@@ -34,10 +33,12 @@ choice
 config USB_MUSB_DAVINCI
 	tristate "DaVinci"
 	depends on ARCH_DAVINCI_DMx
+	depends on BROKEN
 
 config USB_MUSB_DA8XX
 	tristate "DA8xx/OMAP-L1x"
 	depends on ARCH_DAVINCI_DA8XX
+	depends on BROKEN
 
 config USB_MUSB_TUSB6010
 	tristate "TUSB6010"
@@ -53,7 +54,6 @@ config USB_MUSB_AM35X
 
 config USB_MUSB_DSPS
 	tristate "TI DSPS platforms"
-	depends on SOC_TI81XX || SOC_AM33XX
 
 config USB_MUSB_BLACKFIN
 	tristate "Blackfin"
@@ -61,12 +61,12 @@ config USB_MUSB_BLACKFIN
 
 config USB_MUSB_UX500
 	tristate "U8500 and U5500"
-	depends on (ARCH_U8500 && AB8500_USB)
 
 endchoice
 
 choice
 	prompt 'MUSB DMA mode'
+	default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM
 	default USB_UX500_DMA if USB_MUSB_UX500
 	default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 	default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 59eea219034a..2231850c0625 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -149,7 +149,7 @@ static void otg_timer(unsigned long _musb)
 	 */
 	devctl = musb_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
-		otg_state_string(musb->xceiv->state));
+		usb_otg_state_string(musb->xceiv->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
@@ -195,7 +195,7 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
 	if (musb->is_active || (musb->a_wait_bcon == 0 &&
 				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		del_timer(&otg_workaround);
 		last_timer = jiffies;
 		return;
@@ -208,7 +208,7 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
 	last_timer = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&otg_workaround, timeout);
 }
@@ -298,7 +298,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
 		/* NOTE: this must complete power-on within 100 ms. */
 		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				err ? " ERROR" : "",
 				devctl);
 		ret = IRQ_HANDLED;
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index dbb31b30c7fa..5e63b160db0c 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -280,13 +280,13 @@ static void musb_conn_timer_handler(unsigned long _musb)
 		break;
 	default:
 		dev_dbg(musb->controller, "%s state not handled\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		break;
 	}
 	spin_unlock_irqrestore(&musb->lock, flags);
 
 	dev_dbg(musb->controller, "state is %s\n",
-		otg_state_string(musb->xceiv->state));
+		usb_otg_state_string(musb->xceiv->state));
 }
 
 static void bfin_musb_enable(struct musb *musb)
@@ -307,7 +307,7 @@ static void bfin_musb_set_vbus(struct musb *musb, int is_on)
 
 	dev_dbg(musb->controller, "VBUS %s, devctl %02x "
 		/* otg %3x conf %08x prcm %08x */ "\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index f522000e8f06..9db211ee15b5 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -435,7 +435,6 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx,
 	}
 }
 
-#ifdef CONFIG_USB_MUSB_DEBUG
 static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
 {
 	pr_debug("RXBD/%s %08x: "
@@ -444,21 +443,16 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
 			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
 			bd->hw_options);
 }
-#endif
 
 static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
 {
-#ifdef CONFIG_USB_MUSB_DEBUG
 	struct cppi_descriptor	*bd;
 
-	if (!_dbg_level(level))
-		return;
 	cppi_dump_rx(level, rx, tag);
 	if (rx->last_processed)
 		cppi_dump_rxbd("last", rx->last_processed);
 	for (bd = rx->head; bd; bd = bd->next)
 		cppi_dump_rxbd("active", bd);
-#endif
 }
 
 
@@ -784,6 +778,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 	void __iomem		*tibase = musb->ctrl_base;
 	int			is_rndis = 0;
 	struct cppi_rx_stateram	__iomem *rx_ram = rx->state_ram;
+	struct cppi_descriptor	*d;
 
 	if (onepacket) {
 		/* almost every USB driver, host or peripheral side */
@@ -897,14 +892,8 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 	bd->hw_options |= CPPI_SOP_SET;
 	tail->hw_options |= CPPI_EOP_SET;
 
-#ifdef CONFIG_USB_MUSB_DEBUG
-	if (_dbg_level(5)) {
-		struct cppi_descriptor	*d;
-
-		for (d = rx->head; d; d = d->next)
-			cppi_dump_rxbd("S", d);
-	}
-#endif
+	for (d = rx->head; d; d = d->next)
+		cppi_dump_rxbd("S", d);
 
 	/* in case the preceding transfer left some state... */
 	tail = rx->last_processed;
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 41613a2b35e8..b903b744a224 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -198,7 +198,7 @@ static void otg_timer(unsigned long _musb)
 	 */
 	devctl = musb_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
-		otg_state_string(musb->xceiv->state));
+		usb_otg_state_string(musb->xceiv->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
@@ -267,7 +267,7 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
 	if (musb->is_active || (musb->a_wait_bcon == 0 &&
 				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		del_timer(&otg_workaround);
 		last_timer = jiffies;
 		return;
@@ -280,7 +280,7 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
 	last_timer = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&otg_workaround, timeout);
 }
@@ -360,7 +360,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 
 		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				err ? " ERROR" : "",
 				devctl);
 		ret = IRQ_HANDLED;
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index e040d9103735..bea6cc35471c 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -215,7 +215,7 @@ static void otg_timer(unsigned long _musb)
 	 */
 	devctl = musb_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "poll devctl %02x (%s)\n", devctl,
-		otg_state_string(musb->xceiv->state));
+		usb_otg_state_string(musb->xceiv->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
@@ -349,7 +349,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
 		davinci_musb_source_power(musb, drvvbus, 0);
 		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				err ? " ERROR" : "",
 				devctl);
 		retval = IRQ_HANDLED;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index daec6e0f7e38..37a261a6bb6a 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -372,13 +372,13 @@ static void musb_otg_timer_func(unsigned long data)
 	case OTG_STATE_A_SUSPEND:
 	case OTG_STATE_A_WAIT_BCON:
 		dev_dbg(musb->controller, "HNP: %s timeout\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		musb_platform_set_vbus(musb, 0);
 		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 		break;
 	default:
 		dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 	}
 	musb->ignore_disconnect = 0;
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -393,13 +393,14 @@ void musb_hnp_stop(struct musb *musb)
 	void __iomem	*mbase = musb->mregs;
 	u8	reg;
 
-	dev_dbg(musb->controller, "HNP: stop from %s\n", otg_state_string(musb->xceiv->state));
+	dev_dbg(musb->controller, "HNP: stop from %s\n",
+			usb_otg_state_string(musb->xceiv->state));
 
 	switch (musb->xceiv->state) {
 	case OTG_STATE_A_PERIPHERAL:
 		musb_g_disconnect(musb);
 		dev_dbg(musb->controller, "HNP: back to %s\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		break;
 	case OTG_STATE_B_HOST:
 		dev_dbg(musb->controller, "HNP: Disabling HR\n");
@@ -413,7 +414,7 @@ void musb_hnp_stop(struct musb *musb)
 		break;
 	default:
 		dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 	}
 
 	/*
@@ -451,7 +452,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 	 */
 	if (int_usb & MUSB_INTR_RESUME) {
 		handled = IRQ_HANDLED;
-		dev_dbg(musb->controller, "RESUME (%s)\n", otg_state_string(musb->xceiv->state));
+		dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->state));
 
 		if (devctl & MUSB_DEVCTL_HM) {
 			void __iomem *mbase = musb->mregs;
@@ -493,7 +494,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			default:
 				WARNING("bogus %s RESUME (%s)\n",
 					"host",
-					otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->state));
 			}
 		} else {
 			switch (musb->xceiv->state) {
@@ -522,7 +523,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			default:
 				WARNING("bogus %s RESUME (%s)\n",
 					"peripheral",
-					otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->state));
 			}
 		}
 	}
@@ -538,7 +539,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		}
 
 		dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 
 		/* IRQ arrives from ID pin sense or (later, if VBUS power
 		 * is removed) SRP.  responses are time critical:
@@ -602,8 +603,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			break;
 		}
 
-		dev_dbg(musb->controller, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
-				otg_state_string(musb->xceiv->state),
+		dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller,
+				"VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
+				usb_otg_state_string(musb->xceiv->state),
 				devctl,
 				({ char *s;
 				switch (devctl & MUSB_DEVCTL_VBUS) {
@@ -628,7 +630,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 	if (int_usb & MUSB_INTR_SUSPEND) {
 		dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n",
-			otg_state_string(musb->xceiv->state), devctl);
+			usb_otg_state_string(musb->xceiv->state), devctl);
 		handled = IRQ_HANDLED;
 
 		switch (musb->xceiv->state) {
@@ -745,12 +747,12 @@ b_host:
 			usb_hcd_resume_root_hub(hcd);
 
 		dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
-				otg_state_string(musb->xceiv->state), devctl);
+				usb_otg_state_string(musb->xceiv->state), devctl);
 	}
 
 	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
 		dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				MUSB_MODE(musb), devctl);
 		handled = IRQ_HANDLED;
 
@@ -787,7 +789,7 @@ b_host:
 			break;
 		default:
 			WARNING("unhandled DISCONNECT transition (%s)\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 			break;
 		}
 	}
@@ -813,7 +815,7 @@ b_host:
 			}
 		} else {
 			dev_dbg(musb->controller, "BUS RESET as %s\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 			switch (musb->xceiv->state) {
 			case OTG_STATE_A_SUSPEND:
 				/* We need to ignore disconnect on suspend
@@ -826,7 +828,7 @@ b_host:
 			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
 				/* never use invalid T(a_wait_bcon) */
 				dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n",
-					otg_state_string(musb->xceiv->state),
+					usb_otg_state_string(musb->xceiv->state),
 					TA_WAIT_BCON(musb));
 				mod_timer(&musb->otg_timer, jiffies
 					+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
@@ -838,7 +840,7 @@ b_host:
 				break;
 			case OTG_STATE_B_WAIT_ACON:
 				dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n",
-					otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->state));
 				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				musb_g_reset(musb);
 				break;
@@ -850,7 +852,7 @@ b_host:
 				break;
 			default:
 				dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n",
-					otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->state));
 			}
 		}
 	}
@@ -1632,7 +1634,7 @@ musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
 	int ret = -EINVAL;
 
 	spin_lock_irqsave(&musb->lock, flags);
-	ret = sprintf(buf, "%s\n", otg_state_string(musb->xceiv->state));
+	ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->state));
 	spin_unlock_irqrestore(&musb->lock, flags);
 
 	return ret;
@@ -1951,9 +1953,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		musb_write_ulpi_buscontrol(musb->mregs, busctl);
 	}
 
-	MUSB_DEV_MODE(musb);
-	musb->xceiv->otg->default_a = 0;
-	musb->xceiv->state = OTG_STATE_B_IDLE;
+	if (musb->xceiv->otg->default_a) {
+		MUSB_HST_MODE(musb);
+		musb->xceiv->state = OTG_STATE_A_IDLE;
+	} else {
+		MUSB_DEV_MODE(musb);
+		musb->xceiv->state = OTG_STATE_B_IDLE;
+	}
 
 	status = musb_gadget_setup(musb);
 
@@ -2008,7 +2014,6 @@ static int musb_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	int		irq = platform_get_irq_byname(pdev, "mc");
-	int		status;
 	struct resource	*iomem;
 	void __iomem	*base;
 
@@ -2016,24 +2021,17 @@ static int musb_probe(struct platform_device *pdev)
 	if (!iomem || irq <= 0)
 		return -ENODEV;
 
-	base = ioremap(iomem->start, resource_size(iomem));
-	if (!base) {
-		dev_err(dev, "ioremap failed\n");
-		return -ENOMEM;
-	}
+	base = devm_ioremap_resource(dev, iomem);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
-	status = musb_init_controller(dev, irq, base);
-	if (status < 0)
-		iounmap(base);
-
-	return status;
+	return musb_init_controller(dev, irq, base);
 }
 
 static int musb_remove(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	struct musb	*musb = dev_to_musb(dev);
-	void __iomem	*ctrl_base = musb->ctrl_base;
 
 	/* this gets called on rmmod.
 	 *  - Host mode: host may still be active
@@ -2044,7 +2042,6 @@ static int musb_remove(struct platform_device *pdev)
 	musb_shutdown(pdev);
 
 	musb_free(musb);
-	iounmap(ctrl_base);
 	device_init_wakeup(dev, 0);
 #ifndef CONFIG_MUSB_PIO_ONLY
 	dma_set_mask(dev, *dev->parent->dma_mask);
@@ -2293,8 +2290,6 @@ static int __init musb_init(void)
 	if (usb_disabled())
 		return 0;
 
-	pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n",
-		musb_driver_name);
 	return platform_driver_register(&musb_driver);
 }
 module_init(musb_init);
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 6bb89715b637..3a18e44e9391 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -38,6 +38,7 @@
 #include <linux/module.h>
 #include <linux/usb/nop-usb-xceiv.h>
 #include <linux/platform_data/usb-omap.h>
+#include <linux/sizes.h>
 
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -224,7 +225,7 @@ static void otg_timer(unsigned long _musb)
 	 */
 	devctl = dsps_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
@@ -273,7 +274,7 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
 	if (musb->is_active || (musb->a_wait_bcon == 0 &&
 				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 		del_timer(&glue->timer[pdev->id]);
 		glue->last_timer[pdev->id] = jiffies;
 		return;
@@ -288,7 +289,7 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
 	glue->last_timer[pdev->id] = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 			jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&glue->timer[pdev->id], timeout);
 }
@@ -334,7 +335,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 	 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
 	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
 	 */
-	if (usbintr & MUSB_INTR_BABBLE)
+	if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE)
 		pr_info("CAUTION: musb: Babble Interrupt Occurred\n");
 
 	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
@@ -377,7 +378,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 		/* NOTE: this must complete power-on within 100 ms. */
 		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				err ? " ERROR" : "",
 				devctl);
 		ret = IRQ_HANDLED;
@@ -596,14 +597,13 @@ err0:
 
 static int dsps_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *match;
 	const struct dsps_musb_wrapper *wrp;
 	struct dsps_glue *glue;
 	struct resource *iomem;
 	int ret, i;
 
-	match = of_match_node(musb_dsps_of_match, np);
+	match = of_match_node(musb_dsps_of_match, pdev->dev.of_node);
 	if (!match) {
 		dev_err(&pdev->dev, "fail to get matching of_match struct\n");
 		ret = -EINVAL;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 83eddedcd9be..ba7092349fa9 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -46,48 +46,6 @@
 #include "musb_core.h"
 
 
-/* MUSB PERIPHERAL status 3-mar-2006:
- *
- * - EP0 seems solid.  It passes both USBCV and usbtest control cases.
- *   Minor glitches:
- *
- *     + remote wakeup to Linux hosts work, but saw USBCV failures;
- *       in one test run (operator error?)
- *     + endpoint halt tests -- in both usbtest and usbcv -- seem
- *       to break when dma is enabled ... is something wrongly
- *       clearing SENDSTALL?
- *
- * - Mass storage behaved ok when last tested.  Network traffic patterns
- *   (with lots of short transfers etc) need retesting; they turn up the
- *   worst cases of the DMA, since short packets are typical but are not
- *   required.
- *
- * - TX/IN
- *     + both pio and dma behave in with network and g_zero tests
- *     + no cppi throughput issues other than no-hw-queueing
- *     + failed with FLAT_REG (DaVinci)
- *     + seems to behave with double buffering, PIO -and- CPPI
- *     + with gadgetfs + AIO, requests got lost?
- *
- * - RX/OUT
- *     + both pio and dma behave in with network and g_zero tests
- *     + dma is slow in typical case (short_not_ok is clear)
- *     + double buffering ok with PIO
- *     + double buffering *FAILS* with CPPI, wrong data bytes sometimes
- *     + request lossage observed with gadgetfs
- *
- * - ISO not tested ... might work, but only weakly isochronous
- *
- * - Gadget driver disabling of softconnect during bind() is ignored; so
- *   drivers can't hold off host requests until userspace is ready.
- *   (Workaround:  they can turn it off later.)
- *
- * - PORTABILITY (assumes PIO works):
- *     + DaVinci, basically works with cppi dma
- *     + OMAP 2430, ditto with mentor dma
- *     + TUSB 6010, platform-specific dma in the works
- */
-
 /* ----------------------------------------------------------------------- */
 
 #define is_buffer_mapped(req) (is_dma_capable() && \
@@ -280,41 +238,6 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
 		return ep->packet_sz;
 }
 
-
-#ifdef CONFIG_USB_INVENTRA_DMA
-
-/* Peripheral tx (IN) using Mentor DMA works as follows:
-	Only mode 0 is used for transfers <= wPktSize,
-	mode 1 is used for larger transfers,
-
-	One of the following happens:
-	- Host sends IN token which causes an endpoint interrupt
-		-> TxAvail
-			-> if DMA is currently busy, exit.
-			-> if queue is non-empty, txstate().
-
-	- Request is queued by the gadget driver.
-		-> if queue was previously empty, txstate()
-
-	txstate()
-		-> start
-		  /\	-> setup DMA
-		  |     (data is transferred to the FIFO, then sent out when
-		  |	IN token(s) are recd from Host.
-		  |		-> DMA interrupt on completion
-		  |		   calls TxAvail.
-		  |		      -> stop DMA, ~DMAENAB,
-		  |		      -> set TxPktRdy for last short pkt or zlp
-		  |		      -> Complete Request
-		  |		      -> Continue next request (call txstate)
-		  |___________________________________|
-
- * Non-Mentor DMA engines can of course work differently, such as by
- * upleveling from irq-per-packet to irq-per-buffer.
- */
-
-#endif
-
 /*
  * An endpoint is transmitting data. This can be called either from
  * the IRQ routine or from ep.queue() to kickstart a request on an
@@ -621,37 +544,6 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 
 /* ------------------------------------------------------------ */
 
-#ifdef CONFIG_USB_INVENTRA_DMA
-
-/* Peripheral rx (OUT) using Mentor DMA works as follows:
-	- Only mode 0 is used.
-
-	- Request is queued by the gadget class driver.
-		-> if queue was previously empty, rxstate()
-
-	- Host sends OUT token which causes an endpoint interrupt
-	  /\      -> RxReady
-	  |	      -> if request queued, call rxstate
-	  |		/\	-> setup DMA
-	  |		|	     -> DMA interrupt on completion
-	  |		|		-> RxReady
-	  |		|		      -> stop DMA
-	  |		|		      -> ack the read
-	  |		|		      -> if data recd = max expected
-	  |		|				by the request, or host
-	  |		|				sent a short packet,
-	  |		|				complete the request,
-	  |		|				and start the next one.
-	  |		|_____________________________________|
-	  |					 else just wait for the host
-	  |					    to send the next OUT token.
-	  |__________________________________________________|
-
- * Non-Mentor DMA engines can of course work differently.
- */
-
-#endif
-
 /*
  * Context: controller locked, IRQs blocked, endpoint selected
  */
@@ -740,7 +632,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				struct dma_controller	*c;
 				struct dma_channel	*channel;
 				int			use_dma = 0;
-				int transfer_size;
+				unsigned int transfer_size;
 
 				c = musb->dma_controller;
 				channel = musb_ep->dma;
@@ -782,10 +674,11 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 						csr | MUSB_RXCSR_DMAMODE);
 					musb_writew(epio, MUSB_RXCSR, csr);
 
-					transfer_size = min(request->length - request->actual,
+					transfer_size = min_t(unsigned int,
+							request->length -
+							request->actual,
 							channel->max_len);
 					musb_ep->dma->desired_mode = 1;
-
 				} else {
 					if (!musb_ep->hb_mult &&
 						musb_ep->hw_ep->rx_double_buffered)
@@ -815,7 +708,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 
 				struct dma_controller *c;
 				struct dma_channel *channel;
-				int transfer_size = 0;
+				unsigned int transfer_size = 0;
 
 				c = musb->dma_controller;
 				channel = musb_ep->dma;
@@ -824,11 +717,13 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				if (fifo_count < musb_ep->packet_sz)
 					transfer_size = fifo_count;
 				else if (request->short_not_ok)
-					transfer_size =	min(request->length -
+					transfer_size =	min_t(unsigned int,
+							request->length -
 							request->actual,
 							channel->max_len);
 				else
-					transfer_size = min(request->length -
+					transfer_size = min_t(unsigned int,
+							request->length -
 							request->actual,
 							(unsigned)fifo_count);
 
@@ -1681,7 +1576,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget)
 		goto done;
 	default:
 		dev_dbg(musb->controller, "Unhandled wake: %s\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		goto done;
 	}
 
@@ -1801,13 +1696,6 @@ static const struct usb_gadget_ops musb_gadget_operations = {
  * all peripheral ports are external...
  */
 
-static void musb_gadget_release(struct device *dev)
-{
-	/* kref_put(WHAT) */
-	dev_dbg(dev, "%s\n", __func__);
-}
-
-
 static void
 init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
 {
@@ -1892,12 +1780,7 @@ int musb_gadget_setup(struct musb *musb)
 	musb->g.speed = USB_SPEED_UNKNOWN;
 
 	/* this "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&musb->g.dev, "gadget");
-	musb->g.dev.parent = musb->controller;
-	musb->g.dev.dma_mask = musb->controller->dma_mask;
-	musb->g.dev.release = musb_gadget_release;
 	musb->g.name = musb_driver_name;
-
 	musb->g.is_otg = 1;
 
 	musb_g_init_endpoints(musb);
@@ -1905,11 +1788,6 @@ int musb_gadget_setup(struct musb *musb)
 	musb->is_active = 0;
 	musb_platform_try_idle(musb, 0);
 
-	status = device_register(&musb->g.dev);
-	if (status != 0) {
-		put_device(&musb->g.dev);
-		return status;
-	}
 	status = usb_add_gadget_udc(musb->controller, &musb->g);
 	if (status)
 		goto err;
@@ -1924,8 +1802,6 @@ err:
 void musb_gadget_cleanup(struct musb *musb)
 {
 	usb_del_gadget_udc(&musb->g);
-	if (musb->g.dev.parent)
-		device_unregister(&musb->g.dev);
 }
 
 /*
@@ -1977,9 +1853,8 @@ static int musb_gadget_start(struct usb_gadget *g,
 		goto err;
 	}
 
-	if ((musb->xceiv->last_event == USB_EVENT_ID)
-				&& otg->set_vbus)
-		otg_set_vbus(otg, 1);
+	if (musb->xceiv->last_event == USB_EVENT_ID)
+		musb_platform_set_vbus(musb, 1);
 
 	hcd->self.uses_pio_for_control = 1;
 
@@ -2063,6 +1938,7 @@ static int musb_gadget_stop(struct usb_gadget *g,
 	dev_dbg(musb->controller, "unregistering driver %s\n", driver->function);
 
 	musb->is_active = 0;
+	musb->gadget_driver = NULL;
 	musb_platform_try_idle(musb, 0);
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -2099,7 +1975,7 @@ void musb_g_resume(struct musb *musb)
 		break;
 	default:
 		WARNING("unhandled RESUME transition (%s)\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 	}
 }
 
@@ -2129,7 +2005,7 @@ void musb_g_suspend(struct musb *musb)
 		 * A_PERIPHERAL may need care too
 		 */
 		WARNING("unhandled SUSPEND transition (%s)\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 	}
 }
 
@@ -2163,7 +2039,7 @@ void musb_g_disconnect(struct musb *musb)
 	switch (musb->xceiv->state) {
 	default:
 		dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 		MUSB_HST_MODE(musb);
 		break;
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index c9c1ac4e075f..2af45a0c8930 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -505,8 +505,10 @@ static void ep0_rxstate(struct musb *musb)
 			req->status = -EOVERFLOW;
 			count = len;
 		}
-		musb_read_fifo(&musb->endpoints[0], count, buf);
-		req->actual += count;
+		if (count > 0) {
+			musb_read_fifo(&musb->endpoints[0], count, buf);
+			req->actual += count;
+		}
 		csr = MUSB_CSR0_P_SVDRXPKTRDY;
 		if (count < 64 || req->actual == req->length) {
 			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 1ce1fcf3f3e7..8914dec49f01 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2453,7 +2453,7 @@ static int musb_bus_suspend(struct usb_hcd *hcd)
 
 	if (musb->is_active) {
 		WARNING("trying to suspend as %s while active\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 		return -EBUSY;
 	} else
 		return 0;
@@ -2465,6 +2465,118 @@ static int musb_bus_resume(struct usb_hcd *hcd)
 	return 0;
 }
 
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+
+#define MUSB_USB_DMA_ALIGN 4
+
+struct musb_temp_buffer {
+	void *kmalloc_ptr;
+	void *old_xfer_buffer;
+	u8 data[0];
+};
+
+static void musb_free_temp_buffer(struct urb *urb)
+{
+	enum dma_data_direction dir;
+	struct musb_temp_buffer *temp;
+
+	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
+		return;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	temp = container_of(urb->transfer_buffer, struct musb_temp_buffer,
+			    data);
+
+	if (dir == DMA_FROM_DEVICE) {
+		memcpy(temp->old_xfer_buffer, temp->data,
+		       urb->transfer_buffer_length);
+	}
+	urb->transfer_buffer = temp->old_xfer_buffer;
+	kfree(temp->kmalloc_ptr);
+
+	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
+}
+
+static int musb_alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
+{
+	enum dma_data_direction dir;
+	struct musb_temp_buffer *temp;
+	void *kmalloc_ptr;
+	size_t kmalloc_size;
+
+	if (urb->num_sgs || urb->sg ||
+	    urb->transfer_buffer_length == 0 ||
+	    !((uintptr_t)urb->transfer_buffer & (MUSB_USB_DMA_ALIGN - 1)))
+		return 0;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	/* Allocate a buffer with enough padding for alignment */
+	kmalloc_size = urb->transfer_buffer_length +
+		sizeof(struct musb_temp_buffer) + MUSB_USB_DMA_ALIGN - 1;
+
+	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
+	if (!kmalloc_ptr)
+		return -ENOMEM;
+
+	/* Position our struct temp_buffer such that data is aligned */
+	temp = PTR_ALIGN(kmalloc_ptr, MUSB_USB_DMA_ALIGN);
+
+
+	temp->kmalloc_ptr = kmalloc_ptr;
+	temp->old_xfer_buffer = urb->transfer_buffer;
+	if (dir == DMA_TO_DEVICE)
+		memcpy(temp->data, urb->transfer_buffer,
+		       urb->transfer_buffer_length);
+	urb->transfer_buffer = temp->data;
+
+	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
+
+	return 0;
+}
+
+static int musb_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				      gfp_t mem_flags)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	int ret;
+
+	/*
+	 * The DMA engine in RTL1.8 and above cannot handle
+	 * DMA addresses that are not aligned to a 4 byte boundary.
+	 * For such engine implemented (un)map_urb_for_dma hooks.
+	 * Do not use these hooks for RTL<1.8
+	 */
+	if (musb->hwvers < MUSB_HWVERS_1800)
+		return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+
+	ret = musb_alloc_temp_buffer(urb, mem_flags);
+	if (ret)
+		return ret;
+
+	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+	if (ret)
+		musb_free_temp_buffer(urb);
+
+	return ret;
+}
+
+static void musb_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	usb_hcd_unmap_urb_for_dma(hcd, urb);
+
+	/* Do not use this hook for RTL<1.8 (see description above) */
+	if (musb->hwvers < MUSB_HWVERS_1800)
+		return;
+
+	musb_free_temp_buffer(urb);
+}
+#endif /* !CONFIG_MUSB_PIO_ONLY */
+
 const struct hc_driver musb_hc_driver = {
 	.description		= "musb-hcd",
 	.product_desc		= "MUSB HDRC host driver",
@@ -2484,6 +2596,11 @@ const struct hc_driver musb_hc_driver = {
 	.urb_dequeue		= musb_urb_dequeue,
 	.endpoint_disable	= musb_h_disable,
 
+#ifndef CONFIG_MUSB_PIO_ONLY
+	.map_urb_for_dma	= musb_map_urb_for_dma,
+	.unmap_urb_for_dma	= musb_unmap_urb_for_dma,
+#endif
+
 	.hub_status_data	= musb_hub_status_data,
 	.hub_control		= musb_hub_control,
 	.bus_suspend		= musb_bus_suspend,
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index f70579154ded..ef7d11045f56 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -95,7 +95,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
 			break;
 		default:
 			dev_dbg(musb->controller, "bogus rh suspend? %s\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 		}
 	} else if (power & MUSB_POWER_SUSPENDM) {
 		power &= ~MUSB_POWER_SUSPENDM;
@@ -203,7 +203,7 @@ void musb_root_disconnect(struct musb *musb)
 		break;
 	default:
 		dev_dbg(musb->controller, "host disconnect (%s)\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 	}
 }
 
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 1a42a458f2c4..3551f1a30c65 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -117,7 +117,7 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
 			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
 		return;
@@ -134,7 +134,7 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 	last_timer = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		(unsigned long)jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&musb_idle_timer, timeout);
 }
@@ -174,8 +174,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 				}
 			}
 
-			if (otg->set_vbus)
-				otg_set_vbus(otg, 1);
+			otg_set_vbus(otg, 1);
 		} else {
 			musb->is_active = 1;
 			otg->default_a = 1;
@@ -200,7 +199,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 
 	dev_dbg(musb->controller, "VBUS %s, devctl %02x "
 		/* otg %3x conf %08x prcm %08x */ "\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
@@ -292,14 +291,14 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 
 		musb->xceiv->last_event = USB_EVENT_NONE;
 		if (musb->gadget_driver) {
+			omap2430_musb_set_vbus(musb, 0);
 			pm_runtime_mark_last_busy(dev);
 			pm_runtime_put_autosuspend(dev);
 		}
 
-		if (data->interface_type == MUSB_INTERFACE_UTMI) {
-			if (musb->xceiv->otg->set_vbus)
-				otg_set_vbus(musb->xceiv->otg, 0);
-		}
+		if (data->interface_type == MUSB_INTERFACE_UTMI)
+			otg_set_vbus(musb->xceiv->otg, 0);
+
 		omap_control_usb_set_mode(glue->control_otghs,
 			USB_MODE_DISCONNECT);
 		break;
@@ -355,7 +354,12 @@ static int omap2430_musb_init(struct musb *musb)
 	else
 		musb->xceiv = devm_usb_get_phy_dev(dev, 0);
 
-	if (IS_ERR_OR_NULL(musb->xceiv)) {
+	if (IS_ERR(musb->xceiv)) {
+		status = PTR_ERR(musb->xceiv);
+
+		if (status == -ENXIO)
+			return status;
+
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -EPROBE_DEFER;
 	}
@@ -393,6 +397,8 @@ static int omap2430_musb_init(struct musb *musb)
 	if (glue->status != OMAP_MUSB_UNKNOWN)
 		omap_musb_set_mailbox(glue);
 
+	usb_phy_init(musb->xceiv);
+
 	pm_runtime_put_noidle(musb->controller);
 	return 0;
 
@@ -526,10 +532,10 @@ static int omap2430_probe(struct platform_device *pdev)
 		}
 
 		of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
-		of_property_read_u32(np, "interface_type",
+		of_property_read_u32(np, "interface-type",
 						(u32 *)&data->interface_type);
-		of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps);
-		of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits);
+		of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
+		of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
 		of_property_read_u32(np, "power", (u32 *)&pdata->power);
 		config->multipoint = of_property_read_bool(np, "multipoint");
 		pdata->has_mailbox = of_property_read_bool(np,
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 464bd23cccda..7369ba33c94f 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -423,7 +423,7 @@ static void musb_do_idle(unsigned long _musb)
 			&& (musb->idle_timeout == 0
 				|| time_after(jiffies, musb->idle_timeout))) {
 			dev_dbg(musb->controller, "Nothing connected %s, turning off VBUS\n",
-					otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->state));
 		}
 		/* FALLTHROUGH */
 	case OTG_STATE_A_IDLE:
@@ -478,7 +478,7 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
 			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
 		return;
@@ -495,7 +495,7 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 	last_timer = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		(unsigned long)jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&musb_idle_timer, timeout);
 }
@@ -571,7 +571,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
 	dev_dbg(musb->controller, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		musb_readb(musb->mregs, MUSB_DEVCTL),
 		musb_readl(tbase, TUSB_DEV_OTG_STAT),
 		conf, prcm);
@@ -678,13 +678,13 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 				musb->is_active = 0;
 			}
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
-				otg_state_string(musb->xceiv->state), otg_stat);
+				usb_otg_state_string(musb->xceiv->state), otg_stat);
 			idle_timeout = jiffies + (1 * HZ);
 			schedule_work(&musb->irq_work);
 
 		} else /* A-dev state machine */ {
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
-				otg_state_string(musb->xceiv->state), otg_stat);
+				usb_otg_state_string(musb->xceiv->state), otg_stat);
 
 			switch (musb->xceiv->state) {
 			case OTG_STATE_A_IDLE:
@@ -733,7 +733,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 		u8	devctl;
 
 		dev_dbg(musb->controller, "%s timer, %03x\n",
-			otg_state_string(musb->xceiv->state), otg_stat);
+			usb_otg_state_string(musb->xceiv->state), otg_stat);
 
 		switch (musb->xceiv->state) {
 		case OTG_STATE_A_WAIT_VRISE:
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 13a392913769..2c80004e0a83 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/usb/musb-ux500.h>
 
 #include "musb_core.h"
 
@@ -36,6 +37,98 @@ struct ux500_glue {
 };
 #define glue_to_musb(g)	platform_get_drvdata(g->musb)
 
+static void ux500_musb_set_vbus(struct musb *musb, int is_on)
+{
+	u8            devctl;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		if (musb->xceiv->state == OTG_STATE_A_IDLE) {
+			/* start the session */
+			devctl |= MUSB_DEVCTL_SESSION;
+			musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+			/*
+			 * Wait for the musb to set as A device to enable the
+			 * VBUS
+			 */
+			while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+
+				if (time_after(jiffies, timeout)) {
+					dev_err(musb->controller,
+					"configured as A device timeout");
+					break;
+				}
+			}
+
+		} else {
+			musb->is_active = 1;
+			musb->xceiv->otg->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+			devctl |= MUSB_DEVCTL_SESSION;
+			MUSB_HST_MODE(musb);
+		}
+	} else {
+		musb->is_active = 0;
+
+		/* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping
+		 * right to B_IDLE...
+		 */
+		musb->xceiv->otg->default_a = 0;
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		MUSB_DEV_MODE(musb);
+	}
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	/*
+	 * Devctl values will be updated after vbus goes below
+	 * session_valid. The time taken depends on the capacitance
+	 * on VBUS line. The max discharge time can be upto 1 sec
+	 * as per the spec. Typically on our platform, it is 200ms
+	 */
+	if (!is_on)
+		mdelay(200);
+
+	dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
+		usb_otg_state_string(musb->xceiv->state),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+
+static int musb_otg_notifications(struct notifier_block *nb,
+		unsigned long event, void *unused)
+{
+	struct musb *musb = container_of(nb, struct musb, nb);
+
+	dev_dbg(musb->controller, "musb_otg_notifications %ld %s\n",
+			event, usb_otg_state_string(musb->xceiv->state));
+
+	switch (event) {
+	case UX500_MUSB_ID:
+		dev_dbg(musb->controller, "ID GND\n");
+		ux500_musb_set_vbus(musb, 1);
+		break;
+	case UX500_MUSB_VBUS:
+		dev_dbg(musb->controller, "VBUS Connect\n");
+		break;
+	case UX500_MUSB_NONE:
+		dev_dbg(musb->controller, "VBUS Disconnect\n");
+		if (is_host_active(musb))
+			ux500_musb_set_vbus(musb, 0);
+		else
+			musb->xceiv->state = OTG_STATE_B_IDLE;
+		break;
+	default:
+		dev_dbg(musb->controller, "ID float\n");
+		return NOTIFY_DONE;
+	}
+	return NOTIFY_OK;
+}
+
 static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
 {
 	unsigned long   flags;
@@ -58,12 +151,21 @@ static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
 
 static int ux500_musb_init(struct musb *musb)
 {
+	int status;
+
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -EPROBE_DEFER;
 	}
 
+	musb->nb.notifier_call = musb_otg_notifications;
+	status = usb_register_notifier(musb->xceiv, &musb->nb);
+	if (status < 0) {
+		dev_dbg(musb->controller, "notification register failed\n");
+		return status;
+	}
+
 	musb->isr = ux500_musb_interrupt;
 
 	return 0;
@@ -71,6 +173,8 @@ static int ux500_musb_init(struct musb *musb)
 
 static int ux500_musb_exit(struct musb *musb)
 {
+	usb_unregister_notifier(musb->xceiv, &musb->nb);
+
 	usb_put_phy(musb->xceiv);
 
 	return 0;
@@ -79,6 +183,8 @@ static int ux500_musb_exit(struct musb *musb)
 static const struct musb_platform_ops ux500_ops = {
 	.init		= ux500_musb_init,
 	.exit		= ux500_musb_exit,
+
+	.set_vbus	= ux500_musb_set_vbus,
 };
 
 static int ux500_probe(struct platform_device *pdev)
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 039e567dd3b6..338120641145 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -1,7 +1,7 @@
 /*
  * drivers/usb/musb/ux500_dma.c
  *
- * U8500 and U5500 DMA support code
+ * U8500 DMA support code
  *
  * Copyright (C) 2009 STMicroelectronics
  * Copyright (C) 2011 ST-Ericsson SA
@@ -30,6 +30,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/pfn.h>
+#include <linux/sizes.h>
 #include <linux/platform_data/usb-musb-ux500.h>
 #include "musb_core.h"
 
@@ -56,7 +57,7 @@ struct ux500_dma_controller {
 };
 
 /* Work function invoked from DMA callback to handle rx transfers. */
-void ux500_dma_callback(void *private_data)
+static void ux500_dma_callback(void *private_data)
 {
 	struct dma_channel *channel = private_data;
 	struct ux500_dma_channel *ux500_channel = channel->private_data;
@@ -93,8 +94,9 @@ static bool ux500_configure_channel(struct dma_channel *channel,
 	struct musb *musb = ux500_channel->controller->private_data;
 
 	dev_dbg(musb->controller,
-		"packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n",
-		packet_sz, mode, dma_addr, len, ux500_channel->is_tx);
+		"packet_sz=%d, mode=%d, dma_addr=0x%llu, len=%d is_tx=%d\n",
+		packet_sz, mode, (unsigned long long) dma_addr,
+		len, ux500_channel->is_tx);
 
 	ux500_channel->cur_len = len;
 
@@ -191,7 +193,7 @@ static int ux500_dma_is_compatible(struct dma_channel *channel,
 		u16 maxpacket, void *buf, u32 length)
 {
 	if ((maxpacket & 0x3)		||
-		((int)buf & 0x3)	||
+		((unsigned long int) buf & 0x3)	||
 		(length < 512)		||
 		(length & 0x3))
 		return false;
@@ -372,12 +374,17 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba
 
 	controller = kzalloc(sizeof(*controller), GFP_KERNEL);
 	if (!controller)
-		return NULL;
+		goto kzalloc_fail;
 
 	controller->private_data = musb;
 
 	/* Save physical address for DMA controller. */
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		dev_err(musb->controller, "no memory resource defined\n");
+		goto plat_get_fail;
+	}
+
 	controller->phy_base = (dma_addr_t) iomem->start;
 
 	controller->controller.start = ux500_dma_controller_start;
@@ -389,4 +396,9 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba
 	controller->controller.is_compatible = ux500_dma_is_compatible;
 
 	return &controller->controller;
+
+plat_get_fail:
+	kfree(controller);
+kzalloc_fail:
+	return NULL;
 }
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
deleted file mode 100644
index 37962c99ff1e..000000000000
--- a/drivers/usb/otg/Kconfig
+++ /dev/null
@@ -1,141 +0,0 @@
-#
-# USB OTG infrastructure may be needed for peripheral-only, host-only,
-# or OTG-capable configurations when OTG transceivers or controllers
-# are used.
-#
-
-comment "OTG and related infrastructure"
-
-config USB_OTG_UTILS
-	bool
-	help
-	  Select this to make sure the build includes objects from
-	  the OTG infrastructure directory.
-
-if USB || USB_GADGET
-
-#
-# USB Transceiver Drivers
-#
-config USB_GPIO_VBUS
-	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
-	depends on GENERIC_GPIO
-	select USB_OTG_UTILS
-	help
-	  Provides simple GPIO VBUS sensing for controllers with an
-	  internal transceiver via the usb_phy interface, and
-	  optionally control of a D+ pullup GPIO as well as a VBUS
-	  current limit regulator.
-
-config ISP1301_OMAP
-	tristate "Philips ISP1301 with OMAP OTG"
-	depends on I2C && ARCH_OMAP_OTG
-	select USB_OTG_UTILS
-	help
-	  If you say yes here you get support for the Philips ISP1301
-	  USB-On-The-Go transceiver working with the OMAP OTG controller.
-	  The ISP1301 is a full speed USB  transceiver which is used in
-	  products including H2, H3, and H4 development boards for Texas
-	  Instruments OMAP processors.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called isp1301_omap.
-
-config USB_ULPI
-	bool "Generic ULPI Transceiver Driver"
-	depends on ARM
-	select USB_OTG_UTILS
-	help
-	  Enable this to support ULPI connected USB OTG transceivers which
-	  are likely found on embedded boards.
-
-config USB_ULPI_VIEWPORT
-	bool
-	depends on USB_ULPI
-	help
-	  Provides read/write operations to the ULPI phy register set for
-	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
-
-config TWL4030_USB
-	tristate "TWL4030 USB Transceiver Driver"
-	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the USB OTG transceiver on TWL4030
-	  family chips (including the TWL5030 and TPS659x0 devices).
-	  This transceiver supports high and full speed devices plus,
-	  in host mode, low speed.
-
-config TWL6030_USB
-	tristate "TWL6030 USB Transceiver Driver"
-	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the USB OTG transceiver on TWL6030
-	  family chips. This TWL6030 transceiver has the VBUS and ID GND
-	  and OTG SRP events capabilities. For all other transceiver functionality
-	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
-	  are hooked to this driver through platform_data structure.
-	  The definition of internal PHY APIs are in the mach-omap2 layer.
-
-config NOP_USB_XCEIV
-	tristate "NOP USB Transceiver Driver"
-	select USB_OTG_UTILS
-	help
-	  This driver is to be used by all the usb transceiver which are either
-	  built-in with usb ip or which are autonomous and doesn't require any
-	  phy programming such as ISP1x04 etc.
-
-config USB_MSM_OTG
-	tristate "OTG support for Qualcomm on-chip USB controller"
-	depends on (USB || USB_GADGET) && ARCH_MSM
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the USB OTG transceiver on MSM chips. It
-	  handles PHY initialization, clock management, and workarounds
-	  required after resetting the hardware and power management.
-	  This driver is required even for peripheral only or host only
-	  mode configurations.
-	  This driver is not supported on boards like trout which
-	  has an external PHY.
-
-config AB8500_USB
-	tristate "AB8500 USB Transceiver Driver"
-	depends on AB8500_CORE
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the USB OTG transceiver in AB8500 chip.
-	  This transceiver supports high and full speed devices plus,
-	  in host mode, low speed.
-
-config FSL_USB2_OTG
-	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
-	select USB_OTG
-	select USB_OTG_UTILS
-	help
-	  Enable this to support Freescale USB OTG transceiver.
-
-config USB_MXS_PHY
-	tristate "Freescale MXS USB PHY support"
-	depends on ARCH_MXC || ARCH_MXS
-	select STMP_DEVICE
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the Freescale MXS USB PHY.
-
-	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
-
-config USB_MV_OTG
-	tristate "Marvell USB OTG support"
-	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
-	select USB_OTG
-	select USB_OTG_UTILS
-	help
-	  Say Y here if you want to build Marvell USB OTG transciever
-	  driver in kernel (including PXA and MMP series). This driver
-	  implements role switch between EHCI host driver and gadget driver.
-
-	  To compile this driver as a module, choose M here.
-
-endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
deleted file mode 100644
index a844b8d35d14..000000000000
--- a/drivers/usb/otg/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# OTG infrastructure and transceiver drivers
-#
-
-ccflags-$(CONFIG_USB_DEBUG)		:= -DDEBUG
-ccflags-$(CONFIG_USB_GADGET_DEBUG)	+= -DDEBUG
-
-# infrastructure
-obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
-
-# transceiver drivers
-obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
-obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
-obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
-obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o
-obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
-obj-$(CONFIG_USB_ULPI)		+= ulpi.o
-obj-$(CONFIG_USB_ULPI_VIEWPORT)	+= ulpi_viewport.o
-obj-$(CONFIG_USB_MSM_OTG)	+= msm_otg.o
-obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
-fsl_usb2_otg-objs		:= fsl_otg.o otg_fsm.o
-obj-$(CONFIG_FSL_USB2_OTG)	+= fsl_usb2_otg.o
-obj-$(CONFIG_USB_MXS_PHY)	+= mxs-phy.o
-obj-$(CONFIG_USB_MV_OTG)	+= mv_otg.o
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
deleted file mode 100644
index 2d86f26a0183..000000000000
--- a/drivers/usb/otg/ab8500-usb.c
+++ /dev/null
@@ -1,596 +0,0 @@
-/*
- * drivers/usb/otg/ab8500_usb.c
- *
- * USB transceiver driver for AB8500 chip
- *
- * Copyright (C) 2010 ST-Ericsson AB
- * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-#include <linux/slab.h>
-#include <linux/notifier.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab8500.h>
-
-#define AB8500_MAIN_WD_CTRL_REG 0x01
-#define AB8500_USB_LINE_STAT_REG 0x80
-#define AB8500_USB_PHY_CTRL_REG 0x8A
-
-#define AB8500_BIT_OTG_STAT_ID (1 << 0)
-#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
-#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
-#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
-#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
-
-#define AB8500_V1x_LINK_STAT_WAIT (HZ/10)
-#define AB8500_WD_KICK_DELAY_US 100 /* usec */
-#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
-#define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */
-
-/* Usb line status register */
-enum ab8500_usb_link_status {
-	USB_LINK_NOT_CONFIGURED = 0,
-	USB_LINK_STD_HOST_NC,
-	USB_LINK_STD_HOST_C_NS,
-	USB_LINK_STD_HOST_C_S,
-	USB_LINK_HOST_CHG_NM,
-	USB_LINK_HOST_CHG_HS,
-	USB_LINK_HOST_CHG_HS_CHIRP,
-	USB_LINK_DEDICATED_CHG,
-	USB_LINK_ACA_RID_A,
-	USB_LINK_ACA_RID_B,
-	USB_LINK_ACA_RID_C_NM,
-	USB_LINK_ACA_RID_C_HS,
-	USB_LINK_ACA_RID_C_HS_CHIRP,
-	USB_LINK_HM_IDGND,
-	USB_LINK_RESERVED,
-	USB_LINK_NOT_VALID_LINK
-};
-
-struct ab8500_usb {
-	struct usb_phy phy;
-	struct device *dev;
-	int irq_num_id_rise;
-	int irq_num_id_fall;
-	int irq_num_vbus_rise;
-	int irq_num_vbus_fall;
-	int irq_num_link_status;
-	unsigned vbus_draw;
-	struct delayed_work dwork;
-	struct work_struct phy_dis_work;
-	unsigned long link_status_wait;
-	int rev;
-};
-
-static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
-{
-	return container_of(x, struct ab8500_usb, phy);
-}
-
-static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
-{
-	abx500_set_register_interruptible(ab->dev,
-		AB8500_SYS_CTRL2_BLOCK,
-		AB8500_MAIN_WD_CTRL_REG,
-		AB8500_BIT_WD_CTRL_ENABLE);
-
-	udelay(AB8500_WD_KICK_DELAY_US);
-
-	abx500_set_register_interruptible(ab->dev,
-		AB8500_SYS_CTRL2_BLOCK,
-		AB8500_MAIN_WD_CTRL_REG,
-		(AB8500_BIT_WD_CTRL_ENABLE
-		| AB8500_BIT_WD_CTRL_KICK));
-
-	if (ab->rev > 0x10) /* v1.1 v2.0 */
-		udelay(AB8500_WD_V11_DISABLE_DELAY_US);
-	else /* v1.0 */
-		msleep(AB8500_WD_V10_DISABLE_DELAY_MS);
-
-	abx500_set_register_interruptible(ab->dev,
-		AB8500_SYS_CTRL2_BLOCK,
-		AB8500_MAIN_WD_CTRL_REG,
-		0);
-}
-
-static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host,
-					bool enable)
-{
-	u8 ctrl_reg;
-	abx500_get_register_interruptible(ab->dev,
-				AB8500_USB,
-				AB8500_USB_PHY_CTRL_REG,
-				&ctrl_reg);
-	if (sel_host) {
-		if (enable)
-			ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN;
-		else
-			ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN;
-	} else {
-		if (enable)
-			ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN;
-		else
-			ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN;
-	}
-
-	abx500_set_register_interruptible(ab->dev,
-				AB8500_USB,
-				AB8500_USB_PHY_CTRL_REG,
-				ctrl_reg);
-
-	/* Needed to enable the phy.*/
-	if (enable)
-		ab8500_usb_wd_workaround(ab);
-}
-
-#define ab8500_usb_host_phy_en(ab)	ab8500_usb_phy_ctrl(ab, true, true)
-#define ab8500_usb_host_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, true, false)
-#define ab8500_usb_peri_phy_en(ab)	ab8500_usb_phy_ctrl(ab, false, true)
-#define ab8500_usb_peri_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, false, false)
-
-static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
-{
-	u8 reg;
-	enum ab8500_usb_link_status lsts;
-	void *v = NULL;
-	enum usb_phy_events event;
-
-	abx500_get_register_interruptible(ab->dev,
-			AB8500_USB,
-			AB8500_USB_LINE_STAT_REG,
-			&reg);
-
-	lsts = (reg >> 3) & 0x0F;
-
-	switch (lsts) {
-	case USB_LINK_NOT_CONFIGURED:
-	case USB_LINK_RESERVED:
-	case USB_LINK_NOT_VALID_LINK:
-		/* TODO: Disable regulators. */
-		ab8500_usb_host_phy_dis(ab);
-		ab8500_usb_peri_phy_dis(ab);
-		ab->phy.state = OTG_STATE_B_IDLE;
-		ab->phy.otg->default_a = false;
-		ab->vbus_draw = 0;
-		event = USB_EVENT_NONE;
-		break;
-
-	case USB_LINK_STD_HOST_NC:
-	case USB_LINK_STD_HOST_C_NS:
-	case USB_LINK_STD_HOST_C_S:
-	case USB_LINK_HOST_CHG_NM:
-	case USB_LINK_HOST_CHG_HS:
-	case USB_LINK_HOST_CHG_HS_CHIRP:
-		if (ab->phy.otg->gadget) {
-			/* TODO: Enable regulators. */
-			ab8500_usb_peri_phy_en(ab);
-			v = ab->phy.otg->gadget;
-		}
-		event = USB_EVENT_VBUS;
-		break;
-
-	case USB_LINK_HM_IDGND:
-		if (ab->phy.otg->host) {
-			/* TODO: Enable regulators. */
-			ab8500_usb_host_phy_en(ab);
-			v = ab->phy.otg->host;
-		}
-		ab->phy.state = OTG_STATE_A_IDLE;
-		ab->phy.otg->default_a = true;
-		event = USB_EVENT_ID;
-		break;
-
-	case USB_LINK_ACA_RID_A:
-	case USB_LINK_ACA_RID_B:
-		/* TODO */
-	case USB_LINK_ACA_RID_C_NM:
-	case USB_LINK_ACA_RID_C_HS:
-	case USB_LINK_ACA_RID_C_HS_CHIRP:
-	case USB_LINK_DEDICATED_CHG:
-		/* TODO: vbus_draw */
-		event = USB_EVENT_CHARGER;
-		break;
-	}
-
-	atomic_notifier_call_chain(&ab->phy.notifier, event, v);
-
-	return 0;
-}
-
-static void ab8500_usb_delayed_work(struct work_struct *work)
-{
-	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
-						dwork.work);
-
-	ab8500_usb_link_status_update(ab);
-}
-
-static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data)
-{
-	struct ab8500_usb *ab = (struct ab8500_usb *) data;
-
-	/* Wait for link status to become stable. */
-	schedule_delayed_work(&ab->dwork, ab->link_status_wait);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data)
-{
-	struct ab8500_usb *ab = (struct ab8500_usb *) data;
-
-	/* Link status will not be updated till phy is disabled. */
-	ab8500_usb_peri_phy_dis(ab);
-
-	/* Wait for link status to become stable. */
-	schedule_delayed_work(&ab->dwork, ab->link_status_wait);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ab8500_usb_v20_irq(int irq, void *data)
-{
-	struct ab8500_usb *ab = (struct ab8500_usb *) data;
-
-	ab8500_usb_link_status_update(ab);
-
-	return IRQ_HANDLED;
-}
-
-static void ab8500_usb_phy_disable_work(struct work_struct *work)
-{
-	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
-						phy_dis_work);
-
-	if (!ab->phy.otg->host)
-		ab8500_usb_host_phy_dis(ab);
-
-	if (!ab->phy.otg->gadget)
-		ab8500_usb_peri_phy_dis(ab);
-}
-
-static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA)
-{
-	struct ab8500_usb *ab;
-
-	if (!phy)
-		return -ENODEV;
-
-	ab = phy_to_ab(phy);
-
-	ab->vbus_draw = mA;
-
-	if (mA)
-		atomic_notifier_call_chain(&ab->phy.notifier,
-				USB_EVENT_ENUMERATED, ab->phy.otg->gadget);
-	return 0;
-}
-
-/* TODO: Implement some way for charging or other drivers to read
- * ab->vbus_draw.
- */
-
-static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend)
-{
-	/* TODO */
-	return 0;
-}
-
-static int ab8500_usb_set_peripheral(struct usb_otg *otg,
-					struct usb_gadget *gadget)
-{
-	struct ab8500_usb *ab;
-
-	if (!otg)
-		return -ENODEV;
-
-	ab = phy_to_ab(otg->phy);
-
-	/* Some drivers call this function in atomic context.
-	 * Do not update ab8500 registers directly till this
-	 * is fixed.
-	 */
-
-	if (!gadget) {
-		/* TODO: Disable regulators. */
-		otg->gadget = NULL;
-		schedule_work(&ab->phy_dis_work);
-	} else {
-		otg->gadget = gadget;
-		otg->phy->state = OTG_STATE_B_IDLE;
-
-		/* Phy will not be enabled if cable is already
-		 * plugged-in. Schedule to enable phy.
-		 * Use same delay to avoid any race condition.
-		 */
-		schedule_delayed_work(&ab->dwork, ab->link_status_wait);
-	}
-
-	return 0;
-}
-
-static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
-	struct ab8500_usb *ab;
-
-	if (!otg)
-		return -ENODEV;
-
-	ab = phy_to_ab(otg->phy);
-
-	/* Some drivers call this function in atomic context.
-	 * Do not update ab8500 registers directly till this
-	 * is fixed.
-	 */
-
-	if (!host) {
-		/* TODO: Disable regulators. */
-		otg->host = NULL;
-		schedule_work(&ab->phy_dis_work);
-	} else {
-		otg->host = host;
-		/* Phy will not be enabled if cable is already
-		 * plugged-in. Schedule to enable phy.
-		 * Use same delay to avoid any race condition.
-		 */
-		schedule_delayed_work(&ab->dwork, ab->link_status_wait);
-	}
-
-	return 0;
-}
-
-static void ab8500_usb_irq_free(struct ab8500_usb *ab)
-{
-	if (ab->rev < 0x20) {
-		free_irq(ab->irq_num_id_rise, ab);
-		free_irq(ab->irq_num_id_fall, ab);
-		free_irq(ab->irq_num_vbus_rise, ab);
-		free_irq(ab->irq_num_vbus_fall, ab);
-	} else {
-		free_irq(ab->irq_num_link_status, ab);
-	}
-}
-
-static int ab8500_usb_v1x_res_setup(struct platform_device *pdev,
-				struct ab8500_usb *ab)
-{
-	int err;
-
-	ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R");
-	if (ab->irq_num_id_rise < 0) {
-		dev_err(&pdev->dev, "ID rise irq not found\n");
-		return ab->irq_num_id_rise;
-	}
-	err = request_threaded_irq(ab->irq_num_id_rise, NULL,
-		ab8500_usb_v1x_common_irq,
-		IRQF_NO_SUSPEND | IRQF_SHARED,
-		"usb-id-rise", ab);
-	if (err < 0) {
-		dev_err(ab->dev, "request_irq failed for ID rise irq\n");
-		goto fail0;
-	}
-
-	ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
-	if (ab->irq_num_id_fall < 0) {
-		dev_err(&pdev->dev, "ID fall irq not found\n");
-		return ab->irq_num_id_fall;
-	}
-	err = request_threaded_irq(ab->irq_num_id_fall, NULL,
-		ab8500_usb_v1x_common_irq,
-		IRQF_NO_SUSPEND | IRQF_SHARED,
-		"usb-id-fall", ab);
-	if (err < 0) {
-		dev_err(ab->dev, "request_irq failed for ID fall irq\n");
-		goto fail1;
-	}
-
-	ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R");
-	if (ab->irq_num_vbus_rise < 0) {
-		dev_err(&pdev->dev, "VBUS rise irq not found\n");
-		return ab->irq_num_vbus_rise;
-	}
-	err = request_threaded_irq(ab->irq_num_vbus_rise, NULL,
-		ab8500_usb_v1x_common_irq,
-		IRQF_NO_SUSPEND | IRQF_SHARED,
-		"usb-vbus-rise", ab);
-	if (err < 0) {
-		dev_err(ab->dev, "request_irq failed for Vbus rise irq\n");
-		goto fail2;
-	}
-
-	ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F");
-	if (ab->irq_num_vbus_fall < 0) {
-		dev_err(&pdev->dev, "VBUS fall irq not found\n");
-		return ab->irq_num_vbus_fall;
-	}
-	err = request_threaded_irq(ab->irq_num_vbus_fall, NULL,
-		ab8500_usb_v1x_vbus_fall_irq,
-		IRQF_NO_SUSPEND | IRQF_SHARED,
-		"usb-vbus-fall", ab);
-	if (err < 0) {
-		dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
-		goto fail3;
-	}
-
-	return 0;
-fail3:
-	free_irq(ab->irq_num_vbus_rise, ab);
-fail2:
-	free_irq(ab->irq_num_id_fall, ab);
-fail1:
-	free_irq(ab->irq_num_id_rise, ab);
-fail0:
-	return err;
-}
-
-static int ab8500_usb_v2_res_setup(struct platform_device *pdev,
-				struct ab8500_usb *ab)
-{
-	int err;
-
-	ab->irq_num_link_status = platform_get_irq_byname(pdev,
-						"USB_LINK_STATUS");
-	if (ab->irq_num_link_status < 0) {
-		dev_err(&pdev->dev, "Link status irq not found\n");
-		return ab->irq_num_link_status;
-	}
-
-	err = request_threaded_irq(ab->irq_num_link_status, NULL,
-		ab8500_usb_v20_irq,
-		IRQF_NO_SUSPEND | IRQF_SHARED,
-		"usb-link-status", ab);
-	if (err < 0) {
-		dev_err(ab->dev,
-			"request_irq failed for link status irq\n");
-		return err;
-	}
-
-	return 0;
-}
-
-static int ab8500_usb_probe(struct platform_device *pdev)
-{
-	struct ab8500_usb	*ab;
-	struct usb_otg		*otg;
-	int err;
-	int rev;
-
-	rev = abx500_get_chip_id(&pdev->dev);
-	if (rev < 0) {
-		dev_err(&pdev->dev, "Chip id read failed\n");
-		return rev;
-	} else if (rev < 0x10) {
-		dev_err(&pdev->dev, "Unsupported AB8500 chip\n");
-		return -ENODEV;
-	}
-
-	ab = kzalloc(sizeof *ab, GFP_KERNEL);
-	if (!ab)
-		return -ENOMEM;
-
-	otg = kzalloc(sizeof *otg, GFP_KERNEL);
-	if (!otg) {
-		kfree(ab);
-		return -ENOMEM;
-	}
-
-	ab->dev			= &pdev->dev;
-	ab->rev			= rev;
-	ab->phy.dev		= ab->dev;
-	ab->phy.otg		= otg;
-	ab->phy.label		= "ab8500";
-	ab->phy.set_suspend	= ab8500_usb_set_suspend;
-	ab->phy.set_power	= ab8500_usb_set_power;
-	ab->phy.state		= OTG_STATE_UNDEFINED;
-
-	otg->phy		= &ab->phy;
-	otg->set_host		= ab8500_usb_set_host;
-	otg->set_peripheral	= ab8500_usb_set_peripheral;
-
-	platform_set_drvdata(pdev, ab);
-
-	ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
-
-	/* v1: Wait for link status to become stable.
-	 * all: Updates form set_host and set_peripheral as they are atomic.
-	 */
-	INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work);
-
-	/* all: Disable phy when called from set_host and set_peripheral */
-	INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
-
-	if (ab->rev < 0x20) {
-		err = ab8500_usb_v1x_res_setup(pdev, ab);
-		ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT;
-	} else {
-		err = ab8500_usb_v2_res_setup(pdev, ab);
-	}
-
-	if (err < 0)
-		goto fail0;
-
-	err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2);
-	if (err) {
-		dev_err(&pdev->dev, "Can't register transceiver\n");
-		goto fail1;
-	}
-
-	dev_info(&pdev->dev, "AB8500 usb driver initialized\n");
-
-	return 0;
-fail1:
-	ab8500_usb_irq_free(ab);
-fail0:
-	kfree(otg);
-	kfree(ab);
-	return err;
-}
-
-static int ab8500_usb_remove(struct platform_device *pdev)
-{
-	struct ab8500_usb *ab = platform_get_drvdata(pdev);
-
-	ab8500_usb_irq_free(ab);
-
-	cancel_delayed_work_sync(&ab->dwork);
-
-	cancel_work_sync(&ab->phy_dis_work);
-
-	usb_remove_phy(&ab->phy);
-
-	ab8500_usb_host_phy_dis(ab);
-	ab8500_usb_peri_phy_dis(ab);
-
-	platform_set_drvdata(pdev, NULL);
-
-	kfree(ab->phy.otg);
-	kfree(ab);
-
-	return 0;
-}
-
-static struct platform_driver ab8500_usb_driver = {
-	.probe		= ab8500_usb_probe,
-	.remove		= ab8500_usb_remove,
-	.driver		= {
-		.name	= "ab8500-usb",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init ab8500_usb_init(void)
-{
-	return platform_driver_register(&ab8500_usb_driver);
-}
-subsys_initcall(ab8500_usb_init);
-
-static void __exit ab8500_usb_exit(void)
-{
-	platform_driver_unregister(&ab8500_usb_driver);
-}
-module_exit(ab8500_usb_exit);
-
-MODULE_ALIAS("platform:ab8500_usb");
-MODULE_AUTHOR("ST-Ericsson AB");
-MODULE_DESCRIPTION("AB8500 usb transceiver driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 90549382eba5..3a7fec957ca7 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -1,13 +1,74 @@
 #
 # Physical Layer USB driver configuration
 #
-comment "USB Physical Layer drivers"
-	depends on USB || USB_GADGET
+menuconfig USB_PHY
+	tristate "USB Physical Layer drivers"
+	help
+	  USB controllers (those which are host, device or DRD) need a
+	  device to handle the physical layer signalling, commonly called
+	  a PHY.
+
+	  The following drivers add support for such PHY devices.
+
+if USB_PHY
+
+#
+# USB Transceiver Drivers
+#
+config AB8500_USB
+	tristate "AB8500 USB Transceiver Driver"
+	depends on AB8500_CORE
+	help
+	  Enable this to support the USB OTG transceiver in AB8500 chip.
+	  This transceiver supports high and full speed devices plus,
+	  in host mode, low speed.
+
+config FSL_USB2_OTG
+	bool "Freescale USB OTG Transceiver Driver"
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
+	select USB_OTG
+	help
+	  Enable this to support Freescale USB OTG transceiver.
+
+config ISP1301_OMAP
+	tristate "Philips ISP1301 with OMAP OTG"
+	depends on I2C && ARCH_OMAP_OTG
+	help
+	  If you say yes here you get support for the Philips ISP1301
+	  USB-On-The-Go transceiver working with the OMAP OTG controller.
+	  The ISP1301 is a full speed USB  transceiver which is used in
+	  products including H2, H3, and H4 development boards for Texas
+	  Instruments OMAP processors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called isp1301_omap.
+
+config MV_U3D_PHY
+	bool "Marvell USB 3.0 PHY controller Driver"
+	depends on CPU_MMP3
+	help
+	  Enable this to support Marvell USB 3.0 phy controller for Marvell
+	  SoC.
+
+config NOP_USB_XCEIV
+	tristate "NOP USB Transceiver Driver"
+	help
+	  This driver is to be used by all the usb transceiver which are either
+	  built-in with usb ip or which are autonomous and doesn't require any
+	  phy programming such as ISP1x04 etc.
+
+config OMAP_CONTROL_USB
+	tristate "OMAP CONTROL USB Driver"
+	help
+	  Enable this to add support for the USB part present in the control
+	  module. This driver has API to power on the USB2 PHY and to write to
+	  the mailbox. The mailbox is present only in omap4 and the register to
+	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+	  additional register to power on USB3 PHY.
 
 config OMAP_USB2
 	tristate "OMAP USB2 PHY Driver"
 	depends on ARCH_OMAP2PLUS
-	select USB_OTG_UTILS
 	select OMAP_CONTROL_USB
 	help
 	  Enable this to support the transceiver that is part of SOC. This
@@ -17,7 +78,6 @@ config OMAP_USB2
 
 config OMAP_USB3
 	tristate "OMAP USB3 PHY Driver"
-	select USB_OTG_UTILS
 	select OMAP_CONTROL_USB
 	help
 	  Enable this to support the USB3 PHY that is part of SOC. This
@@ -25,14 +85,55 @@ config OMAP_USB3
 	  This driver interacts with the "OMAP Control USB Driver" to power
 	  on/off the PHY.
 
-config OMAP_CONTROL_USB
-	tristate "OMAP CONTROL USB Driver"
+config SAMSUNG_USBPHY
+	tristate "Samsung USB PHY Driver"
 	help
-	  Enable this to add support for the USB part present in the control
-	  module. This driver has API to power on the USB2 PHY and to write to
-	  the mailbox. The mailbox is present only in omap4 and the register to
-	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
-	  additional register to power on USB3 PHY.
+	  Enable this to support Samsung USB phy helper driver for Samsung SoCs.
+	  This driver provides common interface to interact, for Samsung USB 2.0 PHY
+	  driver and later for Samsung USB 3.0 PHY driver.
+
+config SAMSUNG_USB2PHY
+	tristate "Samsung USB 2.0 PHY controller Driver"
+	select SAMSUNG_USBPHY
+	help
+	  Enable this to support Samsung USB 2.0 (High Speed) PHY controller
+	  driver for Samsung SoCs.
+
+config SAMSUNG_USB3PHY
+	tristate "Samsung USB 3.0 PHY controller Driver"
+	select SAMSUNG_USBPHY
+	help
+	  Enable this to support Samsung USB 3.0 (Super Speed) phy controller
+	  for samsung SoCs.
+
+config TWL4030_USB
+	tristate "TWL4030 USB Transceiver Driver"
+	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+	help
+	  Enable this to support the USB OTG transceiver on TWL4030
+	  family chips (including the TWL5030 and TPS659x0 devices).
+	  This transceiver supports high and full speed devices plus,
+	  in host mode, low speed.
+
+config TWL6030_USB
+	tristate "TWL6030 USB Transceiver Driver"
+	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
+	help
+	  Enable this to support the USB OTG transceiver on TWL6030
+	  family chips. This TWL6030 transceiver has the VBUS and ID GND
+	  and OTG SRP events capabilities. For all other transceiver functionality
+	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
+	  are hooked to this driver through platform_data structure.
+	  The definition of internal PHY APIs are in the mach-omap2 layer.
+
+config USB_GPIO_VBUS
+	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
+	depends on GENERIC_GPIO
+	help
+	  Provides simple GPIO VBUS sensing for controllers with an
+	  internal transceiver via the usb_phy interface, and
+	  optionally control of a D+ pullup GPIO as well as a VBUS
+	  current limit regulator.
 
 config USB_ISP1301
 	tristate "NXP ISP1301 USB transceiver support"
@@ -47,18 +148,41 @@ config USB_ISP1301
 	  To compile this driver as a module, choose M here: the
 	  module will be called isp1301.
 
-config MV_U3D_PHY
-	bool "Marvell USB 3.0 PHY controller Driver"
-	depends on USB_MV_U3D
-	select USB_OTG_UTILS
+config USB_MSM_OTG
+	tristate "OTG support for Qualcomm on-chip USB controller"
+	depends on (USB || USB_GADGET) && ARCH_MSM
 	help
-	  Enable this to support Marvell USB 3.0 phy controller for Marvell
-	  SoC.
+	  Enable this to support the USB OTG transceiver on MSM chips. It
+	  handles PHY initialization, clock management, and workarounds
+	  required after resetting the hardware and power management.
+	  This driver is required even for peripheral only or host only
+	  mode configurations.
+	  This driver is not supported on boards like trout which
+	  has an external PHY.
+
+config USB_MV_OTG
+	tristate "Marvell USB OTG support"
+	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
+	select USB_OTG
+	help
+	  Say Y here if you want to build Marvell USB OTG transciever
+	  driver in kernel (including PXA and MMP series). This driver
+	  implements role switch between EHCI host driver and gadget driver.
+
+	  To compile this driver as a module, choose M here.
+
+config USB_MXS_PHY
+	tristate "Freescale MXS USB PHY support"
+	depends on ARCH_MXC || ARCH_MXS
+	select STMP_DEVICE
+	help
+	  Enable this to support the Freescale MXS USB PHY.
+
+	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
 
 config USB_RCAR_PHY
 	tristate "Renesas R-Car USB phy support"
 	depends on USB || USB_GADGET
-	select USB_OTG_UTILS
 	help
 	  Say Y here to add support for the Renesas R-Car USB phy driver.
 	  This chip is typically used as USB phy for USB host, gadget.
@@ -67,10 +191,18 @@ config USB_RCAR_PHY
 	  To compile this driver as a module, choose M here: the
 	  module will be called rcar-phy.
 
-config SAMSUNG_USBPHY
-	bool "Samsung USB PHY controller Driver"
-	depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
-	select USB_OTG_UTILS
+config USB_ULPI
+	bool "Generic ULPI Transceiver Driver"
+	depends on ARM
+	help
+	  Enable this to support ULPI connected USB OTG transceivers which
+	  are likely found on embedded boards.
+
+config USB_ULPI_VIEWPORT
+	bool
+	depends on USB_ULPI
 	help
-	  Enable this to support Samsung USB phy controller for samsung
-	  SoCs.
+	  Provides read/write operations to the ULPI phy register set for
+	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
+
+endif # USB_PHY
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b13faa193e0c..33863c09f3dc 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -4,11 +4,30 @@
 
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
-obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
-obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
-obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
-obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
-obj-$(CONFIG_MV_U3D_PHY)		+= mv_u3d_phy.o
-obj-$(CONFIG_USB_EHCI_TEGRA)	+= tegra_usb_phy.o
-obj-$(CONFIG_USB_RCAR_PHY)		+= rcar-phy.o
-obj-$(CONFIG_SAMSUNG_USBPHY)		+= samsung-usbphy.o
+obj-$(CONFIG_USB_PHY)			+= phy.o
+
+# transceiver drivers, keep the list sorted
+
+obj-$(CONFIG_AB8500_USB)		+= phy-ab8500-usb.o
+phy-fsl-usb2-objs			:= phy-fsl-usb.o phy-fsm-usb.o
+obj-$(CONFIG_FSL_USB2_OTG)		+= phy-fsl-usb2.o
+obj-$(CONFIG_ISP1301_OMAP)		+= phy-isp1301.omap.o
+obj-$(CONFIG_MV_U3D_PHY)		+= phy-mv-u3d-usb.o
+obj-$(CONFIG_NOP_USB_XCEIV)		+= phy-nop.o
+obj-$(CONFIG_OMAP_CONTROL_USB)		+= phy-omap-control.o
+obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
+obj-$(CONFIG_OMAP_USB3)			+= phy-omap-usb3.o
+obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
+obj-$(CONFIG_SAMSUNG_USB2PHY)		+= phy-samsung-usb2.o
+obj-$(CONFIG_SAMSUNG_USB3PHY)		+= phy-samsung-usb3.o
+obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
+obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
+obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
+obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
+obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
+obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
+obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
+obj-$(CONFIG_USB_RCAR_PHY)		+= phy-rcar-usb.o
+obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
+obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o
diff --git a/drivers/usb/phy/isp1301.c b/drivers/usb/phy/isp1301.c
deleted file mode 100644
index 18dbf7e37607..000000000000
--- a/drivers/usb/phy/isp1301.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * NXP ISP1301 USB transceiver driver
- *
- * Copyright (C) 2012 Roland Stigge
- *
- * Author: Roland Stigge <stigge@antcom.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/i2c.h>
-
-#define DRV_NAME		"isp1301"
-
-static const struct i2c_device_id isp1301_id[] = {
-	{ "isp1301", 0 },
-	{ }
-};
-
-static struct i2c_client *isp1301_i2c_client;
-
-static int isp1301_probe(struct i2c_client *client,
-			 const struct i2c_device_id *i2c_id)
-{
-	isp1301_i2c_client = client;
-	return 0;
-}
-
-static int isp1301_remove(struct i2c_client *client)
-{
-	return 0;
-}
-
-static struct i2c_driver isp1301_driver = {
-	.driver = {
-		.name = DRV_NAME,
-	},
-	.probe = isp1301_probe,
-	.remove = isp1301_remove,
-	.id_table = isp1301_id,
-};
-
-module_i2c_driver(isp1301_driver);
-
-static int match(struct device *dev, void *data)
-{
-	struct device_node *node = (struct device_node *)data;
-	return (dev->of_node == node) &&
-		(dev->driver == &isp1301_driver.driver);
-}
-
-struct i2c_client *isp1301_get_client(struct device_node *node)
-{
-	if (node) { /* reference of ISP1301 I2C node via DT */
-		struct device *dev = bus_find_device(&i2c_bus_type, NULL,
-						     node, match);
-		if (!dev)
-			return NULL;
-		return to_i2c_client(dev);
-	} else { /* non-DT: only one ISP1301 chip supported */
-		return isp1301_i2c_client;
-	}
-}
-EXPORT_SYMBOL_GPL(isp1301_get_client);
-
-MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
-MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
new file mode 100644
index 000000000000..4acef26a2ef5
--- /dev/null
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -0,0 +1,924 @@
+/*
+ * drivers/usb/otg/ab8500_usb.c
+ *
+ * USB transceiver driver for AB8500 chip
+ *
+ * Copyright (C) 2010 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/usb/musb-ux500.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
+
+/* Bank AB8500_SYS_CTRL2_BLOCK */
+#define AB8500_MAIN_WD_CTRL_REG 0x01
+
+/* Bank AB8500_USB */
+#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8505_USB_LINE_STAT_REG 0x94
+#define AB8500_USB_PHY_CTRL_REG 0x8A
+
+/* Bank AB8500_DEVELOPMENT */
+#define AB8500_BANK12_ACCESS 0x00
+
+/* Bank AB8500_DEBUG */
+#define AB8500_USB_PHY_TUNE1 0x05
+#define AB8500_USB_PHY_TUNE2 0x06
+#define AB8500_USB_PHY_TUNE3 0x07
+
+#define AB8500_BIT_OTG_STAT_ID (1 << 0)
+#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
+#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
+#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
+#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
+
+#define AB8500_WD_KICK_DELAY_US 100 /* usec */
+#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
+#define AB8500_V20_31952_DISABLE_DELAY_US 100 /* usec */
+
+/* Usb line status register */
+enum ab8500_usb_link_status {
+	USB_LINK_NOT_CONFIGURED_8500 = 0,
+	USB_LINK_STD_HOST_NC_8500,
+	USB_LINK_STD_HOST_C_NS_8500,
+	USB_LINK_STD_HOST_C_S_8500,
+	USB_LINK_HOST_CHG_NM_8500,
+	USB_LINK_HOST_CHG_HS_8500,
+	USB_LINK_HOST_CHG_HS_CHIRP_8500,
+	USB_LINK_DEDICATED_CHG_8500,
+	USB_LINK_ACA_RID_A_8500,
+	USB_LINK_ACA_RID_B_8500,
+	USB_LINK_ACA_RID_C_NM_8500,
+	USB_LINK_ACA_RID_C_HS_8500,
+	USB_LINK_ACA_RID_C_HS_CHIRP_8500,
+	USB_LINK_HM_IDGND_8500,
+	USB_LINK_RESERVED_8500,
+	USB_LINK_NOT_VALID_LINK_8500,
+};
+
+enum ab8505_usb_link_status {
+	USB_LINK_NOT_CONFIGURED_8505 = 0,
+	USB_LINK_STD_HOST_NC_8505,
+	USB_LINK_STD_HOST_C_NS_8505,
+	USB_LINK_STD_HOST_C_S_8505,
+	USB_LINK_CDP_8505,
+	USB_LINK_RESERVED0_8505,
+	USB_LINK_RESERVED1_8505,
+	USB_LINK_DEDICATED_CHG_8505,
+	USB_LINK_ACA_RID_A_8505,
+	USB_LINK_ACA_RID_B_8505,
+	USB_LINK_ACA_RID_C_NM_8505,
+	USB_LINK_RESERVED2_8505,
+	USB_LINK_RESERVED3_8505,
+	USB_LINK_HM_IDGND_8505,
+	USB_LINK_CHARGERPORT_NOT_OK_8505,
+	USB_LINK_CHARGER_DM_HIGH_8505,
+	USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8505,
+	USB_LINK_STD_UPSTREAM_NO_IDGNG_NO_VBUS_8505,
+	USB_LINK_STD_UPSTREAM_8505,
+	USB_LINK_CHARGER_SE1_8505,
+	USB_LINK_CARKIT_CHGR_1_8505,
+	USB_LINK_CARKIT_CHGR_2_8505,
+	USB_LINK_ACA_DOCK_CHGR_8505,
+	USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_8505,
+	USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_8505,
+	USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8505,
+	USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8505,
+	USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8505,
+};
+
+enum ab8500_usb_mode {
+	USB_IDLE = 0,
+	USB_PERIPHERAL,
+	USB_HOST,
+	USB_DEDICATED_CHG
+};
+
+struct ab8500_usb {
+	struct usb_phy phy;
+	struct device *dev;
+	struct ab8500 *ab8500;
+	unsigned vbus_draw;
+	struct work_struct phy_dis_work;
+	enum ab8500_usb_mode mode;
+	struct regulator *v_ape;
+	struct regulator *v_musb;
+	struct regulator *v_ulpi;
+	int saved_v_ulpi;
+	int previous_link_status_state;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pins_sleep;
+};
+
+static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
+{
+	return container_of(x, struct ab8500_usb, phy);
+}
+
+static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
+{
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		AB8500_BIT_WD_CTRL_ENABLE);
+
+	udelay(AB8500_WD_KICK_DELAY_US);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		(AB8500_BIT_WD_CTRL_ENABLE
+		| AB8500_BIT_WD_CTRL_KICK));
+
+	udelay(AB8500_WD_V11_DISABLE_DELAY_US);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		0);
+}
+
+static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
+{
+	int ret, volt;
+
+	ret = regulator_enable(ab->v_ape);
+	if (ret)
+		dev_err(ab->dev, "Failed to enable v-ape\n");
+
+	if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+		ab->saved_v_ulpi = regulator_get_voltage(ab->v_ulpi);
+		if (ab->saved_v_ulpi < 0)
+			dev_err(ab->dev, "Failed to get v_ulpi voltage\n");
+
+		ret = regulator_set_voltage(ab->v_ulpi, 1300000, 1350000);
+		if (ret < 0)
+			dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n",
+					ret);
+
+		ret = regulator_set_optimum_mode(ab->v_ulpi, 28000);
+		if (ret < 0)
+			dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
+					ret);
+	}
+
+	ret = regulator_enable(ab->v_ulpi);
+	if (ret)
+		dev_err(ab->dev, "Failed to enable vddulpivio18\n");
+
+	if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+		volt = regulator_get_voltage(ab->v_ulpi);
+		if ((volt != 1300000) && (volt != 1350000))
+			dev_err(ab->dev, "Vintcore is not set to 1.3V volt=%d\n",
+					volt);
+	}
+
+	ret = regulator_enable(ab->v_musb);
+	if (ret)
+		dev_err(ab->dev, "Failed to enable musb_1v8\n");
+}
+
+static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
+{
+	int ret;
+
+	regulator_disable(ab->v_musb);
+
+	regulator_disable(ab->v_ulpi);
+
+	/* USB is not the only consumer of Vintcore, restore old settings */
+	if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+		if (ab->saved_v_ulpi > 0) {
+			ret = regulator_set_voltage(ab->v_ulpi,
+					ab->saved_v_ulpi, ab->saved_v_ulpi);
+			if (ret < 0)
+				dev_err(ab->dev, "Failed to set the Vintcore to %duV, ret=%d\n",
+						ab->saved_v_ulpi, ret);
+		}
+
+		ret = regulator_set_optimum_mode(ab->v_ulpi, 0);
+		if (ret < 0)
+			dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
+					ret);
+	}
+
+	regulator_disable(ab->v_ape);
+}
+
+static void ab8500_usb_wd_linkstatus(struct ab8500_usb *ab, u8 bit)
+{
+	/* Workaround for v2.0 bug # 31952 */
+	if (is_ab8500_2p0(ab->ab8500)) {
+		abx500_mask_and_set_register_interruptible(ab->dev,
+				AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+				bit, bit);
+		udelay(AB8500_V20_31952_DISABLE_DELAY_US);
+	}
+}
+
+static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host)
+{
+	u8 bit;
+	bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN :
+		AB8500_BIT_PHY_CTRL_DEVICE_EN;
+
+	/* mux and configure USB pins to DEFAULT state */
+	ab->pinctrl = pinctrl_get_select(ab->dev, PINCTRL_STATE_DEFAULT);
+	if (IS_ERR(ab->pinctrl))
+		dev_err(ab->dev, "could not get/set default pinstate\n");
+
+	ab8500_usb_regulator_enable(ab);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			bit, bit);
+}
+
+static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
+{
+	u8 bit;
+	bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN :
+		AB8500_BIT_PHY_CTRL_DEVICE_EN;
+
+	ab8500_usb_wd_linkstatus(ab, bit);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			bit, 0);
+
+	/* Needed to disable the phy.*/
+	ab8500_usb_wd_workaround(ab);
+
+	ab8500_usb_regulator_disable(ab);
+
+	if (!IS_ERR(ab->pinctrl)) {
+		/* configure USB pins to SLEEP state */
+		ab->pins_sleep = pinctrl_lookup_state(ab->pinctrl,
+				PINCTRL_STATE_SLEEP);
+
+		if (IS_ERR(ab->pins_sleep))
+			dev_dbg(ab->dev, "could not get sleep pinstate\n");
+		else if (pinctrl_select_state(ab->pinctrl, ab->pins_sleep))
+			dev_err(ab->dev, "could not set pins to sleep state\n");
+
+		/* as USB pins are shared with idddet, release them to allow
+		 * iddet to request them
+		 */
+		pinctrl_put(ab->pinctrl);
+	}
+}
+
+#define ab8500_usb_host_phy_en(ab)	ab8500_usb_phy_enable(ab, true)
+#define ab8500_usb_host_phy_dis(ab)	ab8500_usb_phy_disable(ab, true)
+#define ab8500_usb_peri_phy_en(ab)	ab8500_usb_phy_enable(ab, false)
+#define ab8500_usb_peri_phy_dis(ab)	ab8500_usb_phy_disable(ab, false)
+
+static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
+		enum ab8505_usb_link_status lsts)
+{
+	enum ux500_musb_vbus_id_status event = 0;
+
+	dev_dbg(ab->dev, "ab8505_usb_link_status_update %d\n", lsts);
+
+	/*
+	 * Spurious link_status interrupts are seen at the time of
+	 * disconnection of a device in RIDA state
+	 */
+	if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8505 &&
+			(lsts == USB_LINK_STD_HOST_NC_8505))
+		return 0;
+
+	ab->previous_link_status_state = lsts;
+
+	switch (lsts) {
+	case USB_LINK_ACA_RID_B_8505:
+		event = UX500_MUSB_RIDB;
+	case USB_LINK_NOT_CONFIGURED_8505:
+	case USB_LINK_RESERVED0_8505:
+	case USB_LINK_RESERVED1_8505:
+	case USB_LINK_RESERVED2_8505:
+	case USB_LINK_RESERVED3_8505:
+		ab->mode = USB_IDLE;
+		ab->phy.otg->default_a = false;
+		ab->vbus_draw = 0;
+		if (event != UX500_MUSB_RIDB)
+			event = UX500_MUSB_NONE;
+		/*
+		 * Fallback to default B_IDLE as nothing
+		 * is connected
+		 */
+		ab->phy.state = OTG_STATE_B_IDLE;
+		break;
+
+	case USB_LINK_ACA_RID_C_NM_8505:
+		event = UX500_MUSB_RIDC;
+	case USB_LINK_STD_HOST_NC_8505:
+	case USB_LINK_STD_HOST_C_NS_8505:
+	case USB_LINK_STD_HOST_C_S_8505:
+	case USB_LINK_CDP_8505:
+		if (ab->mode == USB_IDLE) {
+			ab->mode = USB_PERIPHERAL;
+			ab8500_usb_peri_phy_en(ab);
+			atomic_notifier_call_chain(&ab->phy.notifier,
+					UX500_MUSB_PREPARE, &ab->vbus_draw);
+		}
+		if (event != UX500_MUSB_RIDC)
+			event = UX500_MUSB_VBUS;
+		break;
+
+	case USB_LINK_ACA_RID_A_8505:
+	case USB_LINK_ACA_DOCK_CHGR_8505:
+		event = UX500_MUSB_RIDA;
+	case USB_LINK_HM_IDGND_8505:
+		if (ab->mode == USB_IDLE) {
+			ab->mode = USB_HOST;
+			ab8500_usb_host_phy_en(ab);
+			atomic_notifier_call_chain(&ab->phy.notifier,
+					UX500_MUSB_PREPARE, &ab->vbus_draw);
+		}
+		ab->phy.otg->default_a = true;
+		if (event != UX500_MUSB_RIDA)
+			event = UX500_MUSB_ID;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		break;
+
+	case USB_LINK_DEDICATED_CHG_8505:
+		ab->mode = USB_DEDICATED_CHG;
+		event = UX500_MUSB_CHARGER;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
+		enum ab8500_usb_link_status lsts)
+{
+	enum ux500_musb_vbus_id_status event = 0;
+
+	dev_dbg(ab->dev, "ab8500_usb_link_status_update %d\n", lsts);
+
+	/*
+	 * Spurious link_status interrupts are seen in case of a
+	 * disconnection of a device in IDGND and RIDA stage
+	 */
+	if (ab->previous_link_status_state == USB_LINK_HM_IDGND_8500 &&
+			(lsts == USB_LINK_STD_HOST_C_NS_8500 ||
+			 lsts == USB_LINK_STD_HOST_NC_8500))
+		return 0;
+
+	if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8500 &&
+			lsts == USB_LINK_STD_HOST_NC_8500)
+		return 0;
+
+	ab->previous_link_status_state = lsts;
+
+	switch (lsts) {
+	case USB_LINK_ACA_RID_B_8500:
+		event = UX500_MUSB_RIDB;
+	case USB_LINK_NOT_CONFIGURED_8500:
+	case USB_LINK_NOT_VALID_LINK_8500:
+		ab->mode = USB_IDLE;
+		ab->phy.otg->default_a = false;
+		ab->vbus_draw = 0;
+		if (event != UX500_MUSB_RIDB)
+			event = UX500_MUSB_NONE;
+		/* Fallback to default B_IDLE as nothing is connected */
+		ab->phy.state = OTG_STATE_B_IDLE;
+		break;
+
+	case USB_LINK_ACA_RID_C_NM_8500:
+	case USB_LINK_ACA_RID_C_HS_8500:
+	case USB_LINK_ACA_RID_C_HS_CHIRP_8500:
+		event = UX500_MUSB_RIDC;
+	case USB_LINK_STD_HOST_NC_8500:
+	case USB_LINK_STD_HOST_C_NS_8500:
+	case USB_LINK_STD_HOST_C_S_8500:
+	case USB_LINK_HOST_CHG_NM_8500:
+	case USB_LINK_HOST_CHG_HS_8500:
+	case USB_LINK_HOST_CHG_HS_CHIRP_8500:
+		if (ab->mode == USB_IDLE) {
+			ab->mode = USB_PERIPHERAL;
+			ab8500_usb_peri_phy_en(ab);
+			atomic_notifier_call_chain(&ab->phy.notifier,
+					UX500_MUSB_PREPARE, &ab->vbus_draw);
+		}
+		if (event != UX500_MUSB_RIDC)
+			event = UX500_MUSB_VBUS;
+		break;
+
+	case USB_LINK_ACA_RID_A_8500:
+		event = UX500_MUSB_RIDA;
+	case USB_LINK_HM_IDGND_8500:
+		if (ab->mode == USB_IDLE) {
+			ab->mode = USB_HOST;
+			ab8500_usb_host_phy_en(ab);
+			atomic_notifier_call_chain(&ab->phy.notifier,
+					UX500_MUSB_PREPARE, &ab->vbus_draw);
+		}
+		ab->phy.otg->default_a = true;
+		if (event != UX500_MUSB_RIDA)
+			event = UX500_MUSB_ID;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		break;
+
+	case USB_LINK_DEDICATED_CHG_8500:
+		ab->mode = USB_DEDICATED_CHG;
+		event = UX500_MUSB_CHARGER;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		break;
+
+	case USB_LINK_RESERVED_8500:
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * Connection Sequence:
+ *   1. Link Status Interrupt
+ *   2. Enable AB clock
+ *   3. Enable AB regulators
+ *   4. Enable USB phy
+ *   5. Reset the musb controller
+ *   6. Switch the ULPI GPIO pins to fucntion mode
+ *   7. Enable the musb Peripheral5 clock
+ *   8. Restore MUSB context
+ */
+static int abx500_usb_link_status_update(struct ab8500_usb *ab)
+{
+	u8 reg;
+	int ret = 0;
+
+	if (is_ab8500(ab->ab8500)) {
+		enum ab8500_usb_link_status lsts;
+
+		abx500_get_register_interruptible(ab->dev,
+				AB8500_USB, AB8500_USB_LINE_STAT_REG, &reg);
+		lsts = (reg >> 3) & 0x0F;
+		ret = ab8500_usb_link_status_update(ab, lsts);
+	} else if (is_ab8505(ab->ab8500)) {
+		enum ab8505_usb_link_status lsts;
+
+		abx500_get_register_interruptible(ab->dev,
+				AB8500_USB, AB8505_USB_LINE_STAT_REG, &reg);
+		lsts = (reg >> 3) & 0x1F;
+		ret = ab8505_usb_link_status_update(ab, lsts);
+	}
+
+	return ret;
+}
+
+/*
+ * Disconnection Sequence:
+ *   1. Disconect Interrupt
+ *   2. Disable regulators
+ *   3. Disable AB clock
+ *   4. Disable the Phy
+ *   5. Link Status Interrupt
+ *   6. Disable Musb Clock
+ */
+static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+	enum usb_phy_events event = UX500_MUSB_NONE;
+
+	/* Link status will not be updated till phy is disabled. */
+	if (ab->mode == USB_HOST) {
+		ab->phy.otg->default_a = false;
+		ab->vbus_draw = 0;
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		ab8500_usb_host_phy_dis(ab);
+		ab->mode = USB_IDLE;
+	}
+
+	if (ab->mode == USB_PERIPHERAL) {
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				event, &ab->vbus_draw);
+		ab8500_usb_peri_phy_dis(ab);
+		atomic_notifier_call_chain(&ab->phy.notifier,
+				UX500_MUSB_CLEAN, &ab->vbus_draw);
+		ab->mode = USB_IDLE;
+		ab->phy.otg->default_a = false;
+		ab->vbus_draw = 0;
+	}
+
+	if (is_ab8500_2p0(ab->ab8500)) {
+		if (ab->mode == USB_DEDICATED_CHG) {
+			ab8500_usb_wd_linkstatus(ab,
+					AB8500_BIT_PHY_CTRL_DEVICE_EN);
+			abx500_mask_and_set_register_interruptible(ab->dev,
+					AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+					AB8500_BIT_PHY_CTRL_DEVICE_EN, 0);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_link_status_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	abx500_usb_link_status_update(ab);
+
+	return IRQ_HANDLED;
+}
+
+static void ab8500_usb_phy_disable_work(struct work_struct *work)
+{
+	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+						phy_dis_work);
+
+	if (!ab->phy.otg->host)
+		ab8500_usb_host_phy_dis(ab);
+
+	if (!ab->phy.otg->gadget)
+		ab8500_usb_peri_phy_dis(ab);
+}
+
+static unsigned ab8500_eyediagram_workaroud(struct ab8500_usb *ab, unsigned mA)
+{
+	/*
+	 * AB8500 V2 has eye diagram issues when drawing more than 100mA from
+	 * VBUS.  Set charging current to 100mA in case of standard host
+	 */
+	if (is_ab8500_2p0_or_earlier(ab->ab8500))
+		if (mA > 100)
+			mA = 100;
+
+	return mA;
+}
+
+static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA)
+{
+	struct ab8500_usb *ab;
+
+	if (!phy)
+		return -ENODEV;
+
+	ab = phy_to_ab(phy);
+
+	mA = ab8500_eyediagram_workaroud(ab, mA);
+
+	ab->vbus_draw = mA;
+
+	atomic_notifier_call_chain(&ab->phy.notifier,
+			UX500_MUSB_VBUS, &ab->vbus_draw);
+
+	return 0;
+}
+
+static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend)
+{
+	/* TODO */
+	return 0;
+}
+
+static int ab8500_usb_set_peripheral(struct usb_otg *otg,
+					struct usb_gadget *gadget)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = phy_to_ab(otg->phy);
+
+	ab->phy.otg->gadget = gadget;
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if ((ab->mode != USB_IDLE) && (!gadget)) {
+		ab->mode = USB_IDLE;
+		schedule_work(&ab->phy_dis_work);
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = phy_to_ab(otg->phy);
+
+	ab->phy.otg->host = host;
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if ((ab->mode != USB_IDLE) && (!host)) {
+		ab->mode = USB_IDLE;
+		schedule_work(&ab->phy_dis_work);
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_regulator_get(struct ab8500_usb *ab)
+{
+	int err;
+
+	ab->v_ape = devm_regulator_get(ab->dev, "v-ape");
+	if (IS_ERR(ab->v_ape)) {
+		dev_err(ab->dev, "Could not get v-ape supply\n");
+		err = PTR_ERR(ab->v_ape);
+		return err;
+	}
+
+	ab->v_ulpi = devm_regulator_get(ab->dev, "vddulpivio18");
+	if (IS_ERR(ab->v_ulpi)) {
+		dev_err(ab->dev, "Could not get vddulpivio18 supply\n");
+		err = PTR_ERR(ab->v_ulpi);
+		return err;
+	}
+
+	ab->v_musb = devm_regulator_get(ab->dev, "musb_1v8");
+	if (IS_ERR(ab->v_musb)) {
+		dev_err(ab->dev, "Could not get musb_1v8 supply\n");
+		err = PTR_ERR(ab->v_musb);
+		return err;
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_irq_setup(struct platform_device *pdev,
+		struct ab8500_usb *ab)
+{
+	int err;
+	int irq;
+
+	irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Link status irq not found\n");
+		return irq;
+	}
+	err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+			ab8500_usb_link_status_irq,
+			IRQF_NO_SUSPEND | IRQF_SHARED, "usb-link-status", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for link status irq\n");
+		return err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+	if (irq < 0) {
+		dev_err(&pdev->dev, "ID fall irq not found\n");
+		return irq;
+	}
+	err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+			ab8500_usb_disconnect_irq,
+			IRQF_NO_SUSPEND | IRQF_SHARED, "usb-id-fall", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+		return err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
+	if (irq < 0) {
+		dev_err(&pdev->dev, "VBUS fall irq not found\n");
+		return irq;
+	}
+	err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+			ab8500_usb_disconnect_irq,
+			IRQF_NO_SUSPEND | IRQF_SHARED, "usb-vbus-fall", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_probe(struct platform_device *pdev)
+{
+	struct ab8500_usb	*ab;
+	struct ab8500		*ab8500;
+	struct usb_otg		*otg;
+	int err;
+	int rev;
+
+	ab8500 = dev_get_drvdata(pdev->dev.parent);
+	rev = abx500_get_chip_id(&pdev->dev);
+
+	if (is_ab8500_1p1_or_earlier(ab8500)) {
+		dev_err(&pdev->dev, "Unsupported AB8500 chip rev=%d\n", rev);
+		return -ENODEV;
+	}
+
+	ab = devm_kzalloc(&pdev->dev, sizeof(*ab), GFP_KERNEL);
+	if (!ab)
+		return -ENOMEM;
+
+	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	ab->dev			= &pdev->dev;
+	ab->ab8500		= ab8500;
+	ab->phy.dev		= ab->dev;
+	ab->phy.otg		= otg;
+	ab->phy.label		= "ab8500";
+	ab->phy.set_suspend	= ab8500_usb_set_suspend;
+	ab->phy.set_power	= ab8500_usb_set_power;
+	ab->phy.state		= OTG_STATE_UNDEFINED;
+
+	otg->phy		= &ab->phy;
+	otg->set_host		= ab8500_usb_set_host;
+	otg->set_peripheral	= ab8500_usb_set_peripheral;
+
+	platform_set_drvdata(pdev, ab);
+
+	ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
+
+	/* all: Disable phy when called from set_host and set_peripheral */
+	INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
+
+	err = ab8500_usb_regulator_get(ab);
+	if (err)
+		return err;
+
+	err = ab8500_usb_irq_setup(pdev, ab);
+	if (err < 0)
+		return err;
+
+	err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2);
+	if (err) {
+		dev_err(&pdev->dev, "Can't register transceiver\n");
+		return err;
+	}
+
+	/* Phy tuning values for AB8500 */
+	if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+		/* Enable the PBT/Bank 0x12 access */
+		err = abx500_set_register_interruptible(ab->dev,
+				AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+		if (err < 0)
+			dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+					err);
+
+		err = abx500_set_register_interruptible(ab->dev,
+				AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+		if (err < 0)
+			dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+					err);
+
+		err = abx500_set_register_interruptible(ab->dev,
+				AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00);
+		if (err < 0)
+			dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+					err);
+
+		err = abx500_set_register_interruptible(ab->dev,
+				AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
+		if (err < 0)
+			dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+					err);
+
+		/* Switch to normal mode/disable Bank 0x12 access */
+		err = abx500_set_register_interruptible(ab->dev,
+				AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+		if (err < 0)
+			dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+					err);
+	}
+
+	/* Phy tuning values for AB8505 */
+	if (is_ab8505(ab->ab8500)) {
+		/* Enable the PBT/Bank 0x12 access */
+		err = abx500_mask_and_set_register_interruptible(ab->dev,
+				AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+				0x01, 0x01);
+		if (err < 0)
+			dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+					err);
+
+		err = abx500_mask_and_set_register_interruptible(ab->dev,
+				AB8500_DEBUG, AB8500_USB_PHY_TUNE1,
+				0xC8, 0xC8);
+		if (err < 0)
+			dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+					err);
+
+		err = abx500_mask_and_set_register_interruptible(ab->dev,
+				AB8500_DEBUG, AB8500_USB_PHY_TUNE2,
+				0x60, 0x60);
+		if (err < 0)
+			dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+					err);
+
+		err = abx500_mask_and_set_register_interruptible(ab->dev,
+				AB8500_DEBUG, AB8500_USB_PHY_TUNE3,
+				0xFC, 0x80);
+
+		if (err < 0)
+			dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+					err);
+
+		/* Switch to normal mode/disable Bank 0x12 access */
+		err = abx500_mask_and_set_register_interruptible(ab->dev,
+				AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+				0x00, 0x00);
+		if (err < 0)
+			dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+					err);
+	}
+
+	/* Needed to enable ID detection. */
+	ab8500_usb_wd_workaround(ab);
+
+	abx500_usb_link_status_update(ab);
+
+	dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);
+
+	return 0;
+}
+
+static int ab8500_usb_remove(struct platform_device *pdev)
+{
+	struct ab8500_usb *ab = platform_get_drvdata(pdev);
+
+	cancel_work_sync(&ab->phy_dis_work);
+
+	usb_remove_phy(&ab->phy);
+
+	if (ab->mode == USB_HOST)
+		ab8500_usb_host_phy_dis(ab);
+	else if (ab->mode == USB_PERIPHERAL)
+		ab8500_usb_peri_phy_dis(ab);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver ab8500_usb_driver = {
+	.probe		= ab8500_usb_probe,
+	.remove		= ab8500_usb_remove,
+	.driver		= {
+		.name	= "ab8500-usb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ab8500_usb_init(void)
+{
+	return platform_driver_register(&ab8500_usb_driver);
+}
+subsys_initcall(ab8500_usb_init);
+
+static void __exit ab8500_usb_exit(void)
+{
+	platform_driver_unregister(&ab8500_usb_driver);
+}
+module_exit(ab8500_usb_exit);
+
+MODULE_ALIAS("platform:ab8500_usb");
+MODULE_AUTHOR("ST-Ericsson AB");
+MODULE_DESCRIPTION("AB8500 usb transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/phy/phy-fsl-usb.c
index d16adb41eb21..97b9308507c3 100644
--- a/drivers/usb/otg/fsl_otg.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -43,7 +43,7 @@
 
 #include <asm/unaligned.h>
 
-#include "fsl_otg.h"
+#include "phy-fsl-usb.h"
 
 #define DRIVER_VERSION "Rev. 1.55"
 #define DRIVER_AUTHOR "Jerry Huang/Li Yang"
@@ -361,28 +361,18 @@ int fsl_otg_init_timers(struct otg_fsm *fsm)
 void fsl_otg_uninit_timers(void)
 {
 	/* FSM used timers */
-	if (a_wait_vrise_tmr != NULL)
-		kfree(a_wait_vrise_tmr);
-	if (a_wait_bcon_tmr != NULL)
-		kfree(a_wait_bcon_tmr);
-	if (a_aidl_bdis_tmr != NULL)
-		kfree(a_aidl_bdis_tmr);
-	if (b_ase0_brst_tmr != NULL)
-		kfree(b_ase0_brst_tmr);
-	if (b_se0_srp_tmr != NULL)
-		kfree(b_se0_srp_tmr);
-	if (b_srp_fail_tmr != NULL)
-		kfree(b_srp_fail_tmr);
-	if (a_wait_enum_tmr != NULL)
-		kfree(a_wait_enum_tmr);
+	kfree(a_wait_vrise_tmr);
+	kfree(a_wait_bcon_tmr);
+	kfree(a_aidl_bdis_tmr);
+	kfree(b_ase0_brst_tmr);
+	kfree(b_se0_srp_tmr);
+	kfree(b_srp_fail_tmr);
+	kfree(a_wait_enum_tmr);
 
 	/* device driver used timers */
-	if (b_srp_wait_tmr != NULL)
-		kfree(b_srp_wait_tmr);
-	if (b_data_pulse_tmr != NULL)
-		kfree(b_data_pulse_tmr);
-	if (b_vbus_pulse_tmr != NULL)
-		kfree(b_vbus_pulse_tmr);
+	kfree(b_srp_wait_tmr);
+	kfree(b_data_pulse_tmr);
+	kfree(b_vbus_pulse_tmr);
 }
 
 /* Add timer to timer list */
@@ -1002,7 +992,7 @@ static int show_fsl_usb2_otg_state(struct device *dev,
 	/* State */
 	t = scnprintf(next, size,
 		      "OTG state: %s\n\n",
-		      otg_state_string(fsl_otg_dev->phy.state));
+		      usb_otg_state_string(fsl_otg_dev->phy.state));
 	size -= t;
 	next += t;
 
diff --git a/drivers/usb/otg/fsl_otg.h b/drivers/usb/phy/phy-fsl-usb.h
index ca266280895d..ca266280895d 100644
--- a/drivers/usb/otg/fsl_otg.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
diff --git a/drivers/usb/otg/otg_fsm.c b/drivers/usb/phy/phy-fsm-usb.c
index ade131a8ae5e..c520b3548e7c 100644
--- a/drivers/usb/otg/otg_fsm.c
+++ b/drivers/usb/phy/phy-fsm-usb.c
@@ -29,7 +29,7 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 
-#include "otg_fsm.h"
+#include "phy-otg-fsm.h"
 
 /* Change USB protocol when there is a protocol change */
 static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
@@ -119,7 +119,7 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 	state_changed = 1;
 	if (fsm->otg->phy->state == new_state)
 		return 0;
-	VDBG("Set state: %s\n", otg_state_string(new_state));
+	VDBG("Set state: %s\n", usb_otg_state_string(new_state));
 	otg_leave_state(fsm, fsm->otg->phy->state);
 	switch (new_state) {
 	case OTG_STATE_B_IDLE:
diff --git a/drivers/usb/otg/otg_fsm.h b/drivers/usb/phy/phy-fsm-usb.h
index c30a2e1d9e46..c30a2e1d9e46 100644
--- a/drivers/usb/otg/otg_fsm.h
+++ b/drivers/usb/phy/phy-fsm-usb.h
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index a7d4ac591982..4c76074e518d 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -61,6 +61,7 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
 {
 	struct regulator *vbus_draw = gpio_vbus->vbus_draw;
 	int enabled;
+	int ret;
 
 	if (!vbus_draw)
 		return;
@@ -69,12 +70,16 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
 	if (mA) {
 		regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
 		if (!enabled) {
-			regulator_enable(vbus_draw);
+			ret = regulator_enable(vbus_draw);
+			if (ret < 0)
+				return;
 			gpio_vbus->vbus_draw_enabled = 1;
 		}
 	} else {
 		if (enabled) {
-			regulator_disable(vbus_draw);
+			ret = regulator_disable(vbus_draw);
+			if (ret < 0)
+				return;
 			gpio_vbus->vbus_draw_enabled = 0;
 		}
 	}
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 8b9de9581319..ae481afcb3ec 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -236,7 +236,7 @@ isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
 
 static inline const char *state_name(struct isp1301 *isp)
 {
-	return otg_state_string(isp->phy.state);
+	return usb_otg_state_string(isp->phy.state);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -481,7 +481,7 @@ static void check_state(struct isp1301 *isp, const char *tag)
 	if (isp->phy.state == state && !extra)
 		return;
 	pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
-		otg_state_string(state), fsm, state_name(isp),
+		usb_otg_state_string(state), fsm, state_name(isp),
 		omap_readl(OTG_CTRL));
 }
 
@@ -1077,7 +1077,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
 
 	if (state != isp->phy.state)
 		pr_debug("  isp, %s -> %s\n",
-				otg_state_string(state), state_name(isp));
+				usb_otg_state_string(state), state_name(isp));
 
 #ifdef	CONFIG_USB_OTG
 	/* update the OTG controller state to match the isp1301; may
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
new file mode 100644
index 000000000000..225ae6c97eeb
--- /dev/null
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -0,0 +1,162 @@
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * Author: Roland Stigge <stigge@antcom.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/isp1301.h>
+
+#define DRV_NAME		"isp1301"
+
+struct isp1301 {
+	struct usb_phy		phy;
+	struct mutex		mutex;
+
+	struct i2c_client	*client;
+};
+
+#define phy_to_isp(p)		(container_of((p), struct isp1301, phy))
+
+static const struct i2c_device_id isp1301_id[] = {
+	{ "isp1301", 0 },
+	{ }
+};
+
+static struct i2c_client *isp1301_i2c_client;
+
+static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
+{
+	return i2c_smbus_write_byte_data(isp->client, reg | clear, value);
+}
+
+static int isp1301_write(struct isp1301 *isp, u8 reg, u8 value)
+{
+	return __isp1301_write(isp, reg, value, 0);
+}
+
+static int isp1301_clear(struct isp1301 *isp, u8 reg, u8 value)
+{
+	return __isp1301_write(isp, reg, value, ISP1301_I2C_REG_CLEAR_ADDR);
+}
+
+static int isp1301_phy_init(struct usb_phy *phy)
+{
+	struct isp1301 *isp = phy_to_isp(phy);
+
+	/* Disable transparent UART mode first */
+	isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_UART_EN);
+	isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, ~MC1_SPEED_REG);
+	isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
+	isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_2, ~0);
+	isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_PSW_EN
+				| MC2_SPD_SUSP_CTRL));
+
+	isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, ~0);
+	isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
+	isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLDOWN
+				| OTG1_DP_PULLDOWN));
+	isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLUP
+				| OTG1_DP_PULLUP));
+
+	/* mask all interrupts */
+	isp1301_clear(isp, ISP1301_I2C_INTERRUPT_LATCH, ~0);
+	isp1301_clear(isp, ISP1301_I2C_INTERRUPT_FALLING, ~0);
+	isp1301_clear(isp, ISP1301_I2C_INTERRUPT_RISING, ~0);
+
+	return 0;
+}
+
+static int isp1301_phy_set_vbus(struct usb_phy *phy, int on)
+{
+	struct isp1301 *isp = phy_to_isp(phy);
+
+	if (on)
+		isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+	else
+		isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+
+	return 0;
+}
+
+static int isp1301_probe(struct i2c_client *client,
+			 const struct i2c_device_id *i2c_id)
+{
+	struct isp1301 *isp;
+	struct usb_phy *phy;
+
+	isp = devm_kzalloc(&client->dev, sizeof(*isp), GFP_KERNEL);
+	if (!isp)
+		return -ENOMEM;
+
+	isp->client = client;
+	mutex_init(&isp->mutex);
+
+	phy = &isp->phy;
+	phy->label = DRV_NAME;
+	phy->init = isp1301_phy_init;
+	phy->set_vbus = isp1301_phy_set_vbus;
+	phy->type = USB_PHY_TYPE_USB2;
+
+	i2c_set_clientdata(client, isp);
+	usb_add_phy_dev(phy);
+
+	isp1301_i2c_client = client;
+
+	return 0;
+}
+
+static int isp1301_remove(struct i2c_client *client)
+{
+	struct isp1301 *isp = i2c_get_clientdata(client);
+
+	usb_remove_phy(&isp->phy);
+	isp1301_i2c_client = NULL;
+
+	return 0;
+}
+
+static struct i2c_driver isp1301_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.probe = isp1301_probe,
+	.remove = isp1301_remove,
+	.id_table = isp1301_id,
+};
+
+module_i2c_driver(isp1301_driver);
+
+static int match(struct device *dev, void *data)
+{
+	struct device_node *node = (struct device_node *)data;
+	return (dev->of_node == node) &&
+		(dev->driver == &isp1301_driver.driver);
+}
+
+struct i2c_client *isp1301_get_client(struct device_node *node)
+{
+	if (node) { /* reference of ISP1301 I2C node via DT */
+		struct device *dev = bus_find_device(&i2c_bus_type, NULL,
+						     node, match);
+		if (!dev)
+			return NULL;
+		return to_i2c_client(dev);
+	} else { /* non-DT: only one ISP1301 chip supported */
+		return isp1301_i2c_client;
+	}
+}
+EXPORT_SYMBOL_GPL(isp1301_get_client);
+
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/phy/phy-msm-usb.c
index 749fbf41fb6f..749fbf41fb6f 100644
--- a/drivers/usb/otg/msm_otg.c
+++ b/drivers/usb/phy/phy-msm-usb.c
diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/phy-mv-u3d-usb.c
index bafd67f1f134..f7838a43347c 100644
--- a/drivers/usb/phy/mv_u3d_phy.c
+++ b/drivers/usb/phy/phy-mv-u3d-usb.c
@@ -15,7 +15,7 @@
 #include <linux/usb/otg.h>
 #include <linux/platform_data/mv_usb.h>
 
-#include "mv_u3d_phy.h"
+#include "phy-mv-u3d-usb.h"
 
 /*
  * struct mv_u3d_phy - transceiver driver state
diff --git a/drivers/usb/phy/mv_u3d_phy.h b/drivers/usb/phy/phy-mv-u3d-usb.h
index 2a658cb9a527..2a658cb9a527 100644
--- a/drivers/usb/phy/mv_u3d_phy.h
+++ b/drivers/usb/phy/phy-mv-u3d-usb.h
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/phy/phy-mv-usb.c
index b6a9be31133b..c987bbe27851 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -27,7 +27,7 @@
 #include <linux/usb/hcd.h>
 #include <linux/platform_data/mv_usb.h>
 
-#include "mv_otg.h"
+#include "phy-mv-usb.h"
 
 #define	DRIVER_DESC	"Marvell USB OTG transceiver driver"
 #define	DRIVER_VERSION	"Jan 20, 2010"
@@ -237,18 +237,12 @@ static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
 
 static void otg_clock_enable(struct mv_otg *mvotg)
 {
-	unsigned int i;
-
-	for (i = 0; i < mvotg->clknum; i++)
-		clk_prepare_enable(mvotg->clk[i]);
+	clk_prepare_enable(mvotg->clk);
 }
 
 static void otg_clock_disable(struct mv_otg *mvotg)
 {
-	unsigned int i;
-
-	for (i = 0; i < mvotg->clknum; i++)
-		clk_disable_unprepare(mvotg->clk[i]);
+	clk_disable_unprepare(mvotg->clk);
 }
 
 static int mv_otg_enable_internal(struct mv_otg *mvotg)
@@ -684,16 +678,14 @@ static int mv_otg_probe(struct platform_device *pdev)
 	struct mv_otg *mvotg;
 	struct usb_otg *otg;
 	struct resource *r;
-	int retval = 0, clk_i, i;
-	size_t size;
+	int retval = 0, i;
 
 	if (pdata == NULL) {
 		dev_err(&pdev->dev, "failed to get platform data\n");
 		return -ENODEV;
 	}
 
-	size = sizeof(*mvotg) + sizeof(struct clk *) * pdata->clknum;
-	mvotg = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	mvotg = devm_kzalloc(&pdev->dev, sizeof(*mvotg), GFP_KERNEL);
 	if (!mvotg) {
 		dev_err(&pdev->dev, "failed to allocate memory!\n");
 		return -ENOMEM;
@@ -708,15 +700,9 @@ static int mv_otg_probe(struct platform_device *pdev)
 	mvotg->pdev = pdev;
 	mvotg->pdata = pdata;
 
-	mvotg->clknum = pdata->clknum;
-	for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) {
-		mvotg->clk[clk_i] = devm_clk_get(&pdev->dev,
-						pdata->clkname[clk_i]);
-		if (IS_ERR(mvotg->clk[clk_i])) {
-			retval = PTR_ERR(mvotg->clk[clk_i]);
-			return retval;
-		}
-	}
+	mvotg->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(mvotg->clk))
+		return PTR_ERR(mvotg->clk);
 
 	mvotg->qwork = create_singlethread_workqueue("mv_otg_queue");
 	if (!mvotg->qwork) {
diff --git a/drivers/usb/otg/mv_otg.h b/drivers/usb/phy/phy-mv-usb.h
index 8a9e351b36ba..551da6eb0ba8 100644
--- a/drivers/usb/otg/mv_otg.h
+++ b/drivers/usb/phy/phy-mv-usb.h
@@ -158,8 +158,7 @@ struct mv_otg {
 
 	unsigned int active;
 	unsigned int clock_gating;
-	unsigned int clknum;
-	struct clk *clk[0];
+	struct clk *clk;
 };
 
 #endif
diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/phy/phy-mxs-usb.c
index b0d9f119c749..9d4381e64d51 100644
--- a/drivers/usb/otg/mxs-phy.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -48,12 +48,12 @@ static void mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	stmp_reset_block(base + HW_USBPHY_CTRL);
 
 	/* Power up the PHY */
-	writel_relaxed(0, base + HW_USBPHY_PWD);
+	writel(0, base + HW_USBPHY_PWD);
 
 	/* enable FS/LS device */
-	writel_relaxed(BM_USBPHY_CTRL_ENUTMILEVEL2 |
-			BM_USBPHY_CTRL_ENUTMILEVEL3,
-			base + HW_USBPHY_CTRL_SET);
+	writel(BM_USBPHY_CTRL_ENUTMILEVEL2 |
+	       BM_USBPHY_CTRL_ENUTMILEVEL3,
+	       base + HW_USBPHY_CTRL_SET);
 }
 
 static int mxs_phy_init(struct usb_phy *phy)
@@ -70,8 +70,8 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 
-	writel_relaxed(BM_USBPHY_CTRL_CLKGATE,
-			phy->io_priv + HW_USBPHY_CTRL_SET);
+	writel(BM_USBPHY_CTRL_CLKGATE,
+	       phy->io_priv + HW_USBPHY_CTRL_SET);
 
 	clk_disable_unprepare(mxs_phy->clk);
 }
@@ -81,15 +81,15 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 	struct mxs_phy *mxs_phy = to_mxs_phy(x);
 
 	if (suspend) {
-		writel_relaxed(0xffffffff, x->io_priv + HW_USBPHY_PWD);
-		writel_relaxed(BM_USBPHY_CTRL_CLKGATE,
-			x->io_priv + HW_USBPHY_CTRL_SET);
+		writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+		writel(BM_USBPHY_CTRL_CLKGATE,
+		       x->io_priv + HW_USBPHY_CTRL_SET);
 		clk_disable_unprepare(mxs_phy->clk);
 	} else {
 		clk_prepare_enable(mxs_phy->clk);
-		writel_relaxed(BM_USBPHY_CTRL_CLKGATE,
-			x->io_priv + HW_USBPHY_CTRL_CLR);
-		writel_relaxed(0, x->io_priv + HW_USBPHY_PWD);
+		writel(BM_USBPHY_CTRL_CLKGATE,
+		       x->io_priv + HW_USBPHY_CTRL_CLR);
+		writel(0, x->io_priv + HW_USBPHY_PWD);
 	}
 
 	return 0;
@@ -102,8 +102,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy,
 		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
 
 	if (speed == USB_SPEED_HIGH)
-		writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
-				phy->io_priv + HW_USBPHY_CTRL_SET);
+		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+		       phy->io_priv + HW_USBPHY_CTRL_SET);
 
 	return 0;
 }
@@ -115,8 +115,8 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy,
 		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
 
 	if (speed == USB_SPEED_HIGH)
-		writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
-				phy->io_priv + HW_USBPHY_CTRL_CLR);
+		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+		       phy->io_priv + HW_USBPHY_CTRL_CLR);
 
 	return 0;
 }
@@ -127,6 +127,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	void __iomem *base;
 	struct clk *clk;
 	struct mxs_phy *mxs_phy;
+	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -166,11 +167,19 @@ static int mxs_phy_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, &mxs_phy->phy);
 
+	ret = usb_add_phy_dev(&mxs_phy->phy);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
 static int mxs_phy_remove(struct platform_device *pdev)
 {
+	struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&mxs_phy->phy);
+
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/phy/phy-nop.c
index a3ce24b94a73..2b10cc969bbb 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/phy/phy-nop.c
@@ -32,10 +32,16 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
 
 struct nop_usb_xceiv {
-	struct usb_phy		phy;
-	struct device		*dev;
+	struct usb_phy phy;
+	struct device *dev;
+	struct clk *clk;
+	struct regulator *vcc;
+	struct regulator *reset;
 };
 
 static struct platform_device *pd;
@@ -64,6 +70,46 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
+static int nop_init(struct usb_phy *phy)
+{
+	struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev);
+
+	if (!IS_ERR(nop->vcc)) {
+		if (regulator_enable(nop->vcc))
+			dev_err(phy->dev, "Failed to enable power\n");
+	}
+
+	if (!IS_ERR(nop->clk))
+		clk_enable(nop->clk);
+
+	if (!IS_ERR(nop->reset)) {
+		/* De-assert RESET */
+		if (regulator_enable(nop->reset))
+			dev_err(phy->dev, "Failed to de-assert reset\n");
+	}
+
+	return 0;
+}
+
+static void nop_shutdown(struct usb_phy *phy)
+{
+	struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev);
+
+	if (!IS_ERR(nop->reset)) {
+		/* Assert RESET */
+		if (regulator_disable(nop->reset))
+			dev_err(phy->dev, "Failed to assert reset\n");
+	}
+
+	if (!IS_ERR(nop->clk))
+		clk_disable(nop->clk);
+
+	if (!IS_ERR(nop->vcc)) {
+		if (regulator_disable(nop->vcc))
+			dev_err(phy->dev, "Failed to disable power\n");
+	}
+}
+
 static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
 {
 	if (!otg)
@@ -95,39 +141,96 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
 
 static int nop_usb_xceiv_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data;
 	struct nop_usb_xceiv	*nop;
 	enum usb_phy_type	type = USB_PHY_TYPE_USB2;
 	int err;
+	u32 clk_rate = 0;
+	bool needs_vcc = false;
+	bool needs_reset = false;
 
-	nop = kzalloc(sizeof *nop, GFP_KERNEL);
+	nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL);
 	if (!nop)
 		return -ENOMEM;
 
-	nop->phy.otg = kzalloc(sizeof *nop->phy.otg, GFP_KERNEL);
-	if (!nop->phy.otg) {
-		kfree(nop);
+	nop->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*nop->phy.otg),
+							GFP_KERNEL);
+	if (!nop->phy.otg)
 		return -ENOMEM;
-	}
 
-	if (pdata)
+	if (dev->of_node) {
+		struct device_node *node = dev->of_node;
+
+		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
+			clk_rate = 0;
+
+		needs_vcc = of_property_read_bool(node, "vcc-supply");
+		needs_reset = of_property_read_bool(node, "reset-supply");
+
+	} else if (pdata) {
 		type = pdata->type;
+		clk_rate = pdata->clk_rate;
+		needs_vcc = pdata->needs_vcc;
+		needs_reset = pdata->needs_reset;
+	}
+
+	nop->clk = devm_clk_get(&pdev->dev, "main_clk");
+	if (IS_ERR(nop->clk)) {
+		dev_dbg(&pdev->dev, "Can't get phy clock: %ld\n",
+					PTR_ERR(nop->clk));
+	}
+
+	if (!IS_ERR(nop->clk) && clk_rate) {
+		err = clk_set_rate(nop->clk, clk_rate);
+		if (err) {
+			dev_err(&pdev->dev, "Error setting clock rate\n");
+			return err;
+		}
+	}
+
+	if (!IS_ERR(nop->clk)) {
+		err = clk_prepare(nop->clk);
+		if (err) {
+			dev_err(&pdev->dev, "Error preparing clock\n");
+			return err;
+		}
+	}
+
+	nop->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(nop->vcc)) {
+		dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n",
+					PTR_ERR(nop->vcc));
+		if (needs_vcc)
+			return -EPROBE_DEFER;
+	}
+
+	nop->reset = devm_regulator_get(&pdev->dev, "reset");
+	if (IS_ERR(nop->reset)) {
+		dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n",
+					PTR_ERR(nop->reset));
+		if (needs_reset)
+			return -EPROBE_DEFER;
+	}
 
 	nop->dev		= &pdev->dev;
 	nop->phy.dev		= nop->dev;
 	nop->phy.label		= "nop-xceiv";
 	nop->phy.set_suspend	= nop_set_suspend;
+	nop->phy.init		= nop_init;
+	nop->phy.shutdown	= nop_shutdown;
 	nop->phy.state		= OTG_STATE_UNDEFINED;
+	nop->phy.type		= type;
 
 	nop->phy.otg->phy		= &nop->phy;
 	nop->phy.otg->set_host		= nop_set_host;
 	nop->phy.otg->set_peripheral	= nop_set_peripheral;
 
-	err = usb_add_phy(&nop->phy, type);
+	err = usb_add_phy_dev(&nop->phy);
 	if (err) {
 		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
 			err);
-		goto exit;
+		goto err_add;
 	}
 
 	platform_set_drvdata(pdev, nop);
@@ -135,9 +238,10 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
 	ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier);
 
 	return 0;
-exit:
-	kfree(nop->phy.otg);
-	kfree(nop);
+
+err_add:
+	if (!IS_ERR(nop->clk))
+		clk_unprepare(nop->clk);
 	return err;
 }
 
@@ -145,21 +249,30 @@ static int nop_usb_xceiv_remove(struct platform_device *pdev)
 {
 	struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
 
+	if (!IS_ERR(nop->clk))
+		clk_unprepare(nop->clk);
+
 	usb_remove_phy(&nop->phy);
 
 	platform_set_drvdata(pdev, NULL);
-	kfree(nop->phy.otg);
-	kfree(nop);
 
 	return 0;
 }
 
+static const struct of_device_id nop_xceiv_dt_ids[] = {
+	{ .compatible = "usb-nop-xceiv" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
+
 static struct platform_driver nop_usb_xceiv_driver = {
 	.probe		= nop_usb_xceiv_probe,
 	.remove		= nop_usb_xceiv_remove,
 	.driver		= {
 		.name	= "nop_usb_xceiv",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(nop_xceiv_dt_ids),
 	},
 };
 
diff --git a/drivers/usb/phy/omap-control-usb.c b/drivers/usb/phy/phy-omap-control.c
index 1419ceda9759..1419ceda9759 100644
--- a/drivers/usb/phy/omap-control-usb.c
+++ b/drivers/usb/phy/phy-omap-control.c
diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/phy-omap-usb2.c
index 844ab68f08d0..844ab68f08d0 100644
--- a/drivers/usb/phy/omap-usb2.c
+++ b/drivers/usb/phy/phy-omap-usb2.c
diff --git a/drivers/usb/phy/omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index a6e60b1e102e..a6e60b1e102e 100644
--- a/drivers/usb/phy/omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
diff --git a/drivers/usb/phy/rcar-phy.c b/drivers/usb/phy/phy-rcar-usb.c
index a35681b0c501..a35681b0c501 100644
--- a/drivers/usb/phy/rcar-phy.c
+++ b/drivers/usb/phy/phy-rcar-usb.c
diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
new file mode 100644
index 000000000000..7b118ee5f5e4
--- /dev/null
+++ b/drivers/usb/phy/phy-samsung-usb.c
@@ -0,0 +1,236 @@
+/* linux/drivers/usb/phy/phy-samsung-usb.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Author: Praveen Paneri <p.paneri@samsung.com>
+ *
+ * Samsung USB-PHY helper driver with common function calls;
+ * interacts with Samsung USB 2.0 PHY controller driver and later
+ * with Samsung USB 3.0 PHY driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/usb/samsung_usb_phy.h>
+
+#include "phy-samsung-usb.h"
+
+int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
+{
+	struct device_node *usbphy_sys;
+
+	/* Getting node for system controller interface for usb-phy */
+	usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys");
+	if (!usbphy_sys) {
+		dev_err(sphy->dev, "No sys-controller interface for usb-phy\n");
+		return -ENODEV;
+	}
+
+	sphy->pmuregs = of_iomap(usbphy_sys, 0);
+
+	if (sphy->pmuregs == NULL) {
+		dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
+		goto err0;
+	}
+
+	sphy->sysreg = of_iomap(usbphy_sys, 1);
+
+	/*
+	 * Not returning error code here, since this situation is not fatal.
+	 * Few SoCs may not have this switch available
+	 */
+	if (sphy->sysreg == NULL)
+		dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n");
+
+	of_node_put(usbphy_sys);
+
+	return 0;
+
+err0:
+	of_node_put(usbphy_sys);
+	return -ENXIO;
+}
+EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt);
+
+/*
+ * Set isolation here for phy.
+ * Here 'on = true' would mean USB PHY block is isolated, hence
+ * de-activated and vice-versa.
+ */
+void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
+{
+	void __iomem *reg = NULL;
+	u32 reg_val;
+	u32 en_mask = 0;
+
+	if (!sphy->pmuregs) {
+		dev_warn(sphy->dev, "Can't set pmu isolation\n");
+		return;
+	}
+
+	switch (sphy->drv_data->cpu_type) {
+	case TYPE_S3C64XX:
+		/*
+		 * Do nothing: We will add here once S3C64xx goes for DT support
+		 */
+		break;
+	case TYPE_EXYNOS4210:
+		/*
+		 * Fall through since exynos4210 and exynos5250 have similar
+		 * register architecture: two separate registers for host and
+		 * device phy control with enable bit at position 0.
+		 */
+	case TYPE_EXYNOS5250:
+		if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
+			reg = sphy->pmuregs +
+				sphy->drv_data->devphy_reg_offset;
+			en_mask = sphy->drv_data->devphy_en_mask;
+		} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
+			reg = sphy->pmuregs +
+				sphy->drv_data->hostphy_reg_offset;
+			en_mask = sphy->drv_data->hostphy_en_mask;
+		}
+		break;
+	default:
+		dev_err(sphy->dev, "Invalid SoC type\n");
+		return;
+	}
+
+	reg_val = readl(reg);
+
+	if (on)
+		reg_val &= ~en_mask;
+	else
+		reg_val |= en_mask;
+
+	writel(reg_val, reg);
+}
+EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation);
+
+/*
+ * Configure the mode of working of usb-phy here: HOST/DEVICE.
+ */
+void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
+{
+	u32 reg;
+
+	if (!sphy->sysreg) {
+		dev_warn(sphy->dev, "Can't configure specified phy mode\n");
+		return;
+	}
+
+	reg = readl(sphy->sysreg);
+
+	if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
+		reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
+	else if (sphy->phy_type == USB_PHY_TYPE_HOST)
+		reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;
+
+	writel(reg, sphy->sysreg);
+}
+EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel);
+
+/*
+ * PHYs are different for USB Device and USB Host.
+ * This make sure that correct PHY type is selected before
+ * any operation on PHY.
+ */
+int samsung_usbphy_set_type(struct usb_phy *phy,
+				enum samsung_usb_phy_type phy_type)
+{
+	struct samsung_usbphy *sphy = phy_to_sphy(phy);
+
+	sphy->phy_type = phy_type;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(samsung_usbphy_set_type);
+
+/*
+ * Returns reference clock frequency selection value
+ */
+int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
+{
+	struct clk *ref_clk;
+	int refclk_freq = 0;
+
+	/*
+	 * In exynos5250 USB host and device PHY use
+	 * external crystal clock XXTI
+	 */
+	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
+		ref_clk = devm_clk_get(sphy->dev, "ext_xtal");
+	else
+		ref_clk = devm_clk_get(sphy->dev, "xusbxti");
+	if (IS_ERR(ref_clk)) {
+		dev_err(sphy->dev, "Failed to get reference clock\n");
+		return PTR_ERR(ref_clk);
+	}
+
+	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) {
+		/* set clock frequency for PLL */
+		switch (clk_get_rate(ref_clk)) {
+		case 9600 * KHZ:
+			refclk_freq = FSEL_CLKSEL_9600K;
+			break;
+		case 10 * MHZ:
+			refclk_freq = FSEL_CLKSEL_10M;
+			break;
+		case 12 * MHZ:
+			refclk_freq = FSEL_CLKSEL_12M;
+			break;
+		case 19200 * KHZ:
+			refclk_freq = FSEL_CLKSEL_19200K;
+			break;
+		case 20 * MHZ:
+			refclk_freq = FSEL_CLKSEL_20M;
+			break;
+		case 50 * MHZ:
+			refclk_freq = FSEL_CLKSEL_50M;
+			break;
+		case 24 * MHZ:
+		default:
+			/* default reference clock */
+			refclk_freq = FSEL_CLKSEL_24M;
+			break;
+		}
+	} else {
+		switch (clk_get_rate(ref_clk)) {
+		case 12 * MHZ:
+			refclk_freq = PHYCLK_CLKSEL_12M;
+			break;
+		case 24 * MHZ:
+			refclk_freq = PHYCLK_CLKSEL_24M;
+			break;
+		case 48 * MHZ:
+			refclk_freq = PHYCLK_CLKSEL_48M;
+			break;
+		default:
+			if (sphy->drv_data->cpu_type == TYPE_S3C64XX)
+				refclk_freq = PHYCLK_CLKSEL_48M;
+			else
+				refclk_freq = PHYCLK_CLKSEL_24M;
+			break;
+		}
+	}
+	clk_put(ref_clk);
+
+	return refclk_freq;
+}
+EXPORT_SYMBOL_GPL(samsung_usbphy_get_refclk_freq);
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
new file mode 100644
index 000000000000..70a9cae5e37f
--- /dev/null
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -0,0 +1,327 @@
+/* linux/drivers/usb/phy/phy-samsung-usb.h
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
+ * OHCI-EXYNOS controllers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/usb/phy.h>
+
+/* Register definitions */
+
+#define SAMSUNG_PHYPWR				(0x00)
+
+#define PHYPWR_NORMAL_MASK			(0x19 << 0)
+#define PHYPWR_OTG_DISABLE			(0x1 << 4)
+#define PHYPWR_ANALOG_POWERDOWN			(0x1 << 3)
+#define PHYPWR_FORCE_SUSPEND			(0x1 << 1)
+/* For Exynos4 */
+#define PHYPWR_NORMAL_MASK_PHY0			(0x39 << 0)
+#define PHYPWR_SLEEP_PHY0			(0x1 << 5)
+
+#define SAMSUNG_PHYCLK				(0x04)
+
+#define PHYCLK_MODE_USB11			(0x1 << 6)
+#define PHYCLK_EXT_OSC				(0x1 << 5)
+#define PHYCLK_COMMON_ON_N			(0x1 << 4)
+#define PHYCLK_ID_PULL				(0x1 << 2)
+#define PHYCLK_CLKSEL_MASK			(0x3 << 0)
+#define PHYCLK_CLKSEL_48M			(0x0 << 0)
+#define PHYCLK_CLKSEL_12M			(0x2 << 0)
+#define PHYCLK_CLKSEL_24M			(0x3 << 0)
+
+#define SAMSUNG_RSTCON				(0x08)
+
+#define RSTCON_PHYLINK_SWRST			(0x1 << 2)
+#define RSTCON_HLINK_SWRST			(0x1 << 1)
+#define RSTCON_SWRST				(0x1 << 0)
+
+/* EXYNOS5 */
+#define EXYNOS5_PHY_HOST_CTRL0			(0x00)
+
+#define HOST_CTRL0_PHYSWRSTALL			(0x1 << 31)
+
+#define HOST_CTRL0_REFCLKSEL_MASK		(0x3 << 19)
+#define HOST_CTRL0_REFCLKSEL_XTAL		(0x0 << 19)
+#define HOST_CTRL0_REFCLKSEL_EXTL		(0x1 << 19)
+#define HOST_CTRL0_REFCLKSEL_CLKCORE		(0x2 << 19)
+
+#define HOST_CTRL0_FSEL_MASK			(0x7 << 16)
+#define HOST_CTRL0_FSEL(_x)			((_x) << 16)
+
+#define FSEL_CLKSEL_50M				(0x7)
+#define FSEL_CLKSEL_24M				(0x5)
+#define FSEL_CLKSEL_20M				(0x4)
+#define FSEL_CLKSEL_19200K			(0x3)
+#define FSEL_CLKSEL_12M				(0x2)
+#define FSEL_CLKSEL_10M				(0x1)
+#define FSEL_CLKSEL_9600K			(0x0)
+
+#define HOST_CTRL0_TESTBURNIN			(0x1 << 11)
+#define HOST_CTRL0_RETENABLE			(0x1 << 10)
+#define HOST_CTRL0_COMMONON_N			(0x1 << 9)
+#define HOST_CTRL0_SIDDQ			(0x1 << 6)
+#define HOST_CTRL0_FORCESLEEP			(0x1 << 5)
+#define HOST_CTRL0_FORCESUSPEND			(0x1 << 4)
+#define HOST_CTRL0_WORDINTERFACE		(0x1 << 3)
+#define HOST_CTRL0_UTMISWRST			(0x1 << 2)
+#define HOST_CTRL0_LINKSWRST			(0x1 << 1)
+#define HOST_CTRL0_PHYSWRST			(0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_TUNE0			(0x04)
+
+#define EXYNOS5_PHY_HSIC_CTRL1			(0x10)
+
+#define EXYNOS5_PHY_HSIC_TUNE1			(0x14)
+
+#define EXYNOS5_PHY_HSIC_CTRL2			(0x20)
+
+#define EXYNOS5_PHY_HSIC_TUNE2			(0x24)
+
+#define HSIC_CTRL_REFCLKSEL_MASK		(0x3 << 23)
+#define HSIC_CTRL_REFCLKSEL			(0x2 << 23)
+
+#define HSIC_CTRL_REFCLKDIV_MASK		(0x7f << 16)
+#define HSIC_CTRL_REFCLKDIV(_x)			((_x) << 16)
+#define HSIC_CTRL_REFCLKDIV_12			(0x24 << 16)
+#define HSIC_CTRL_REFCLKDIV_15			(0x1c << 16)
+#define HSIC_CTRL_REFCLKDIV_16			(0x1a << 16)
+#define HSIC_CTRL_REFCLKDIV_19_2		(0x15 << 16)
+#define HSIC_CTRL_REFCLKDIV_20			(0x14 << 16)
+
+#define HSIC_CTRL_SIDDQ				(0x1 << 6)
+#define HSIC_CTRL_FORCESLEEP			(0x1 << 5)
+#define HSIC_CTRL_FORCESUSPEND			(0x1 << 4)
+#define HSIC_CTRL_WORDINTERFACE			(0x1 << 3)
+#define HSIC_CTRL_UTMISWRST			(0x1 << 2)
+#define HSIC_CTRL_PHYSWRST			(0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_EHCICTRL		(0x30)
+
+#define HOST_EHCICTRL_ENAINCRXALIGN		(0x1 << 29)
+#define HOST_EHCICTRL_ENAINCR4			(0x1 << 28)
+#define HOST_EHCICTRL_ENAINCR8			(0x1 << 27)
+#define HOST_EHCICTRL_ENAINCR16			(0x1 << 26)
+
+#define EXYNOS5_PHY_HOST_OHCICTRL		(0x34)
+
+#define HOST_OHCICTRL_SUSPLGCY			(0x1 << 3)
+#define HOST_OHCICTRL_APPSTARTCLK		(0x1 << 2)
+#define HOST_OHCICTRL_CNTSEL			(0x1 << 1)
+#define HOST_OHCICTRL_CLKCKTRST			(0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_SYS			(0x38)
+
+#define OTG_SYS_PHYLINK_SWRESET			(0x1 << 14)
+#define OTG_SYS_LINKSWRST_UOTG			(0x1 << 13)
+#define OTG_SYS_PHY0_SWRST			(0x1 << 12)
+
+#define OTG_SYS_REFCLKSEL_MASK			(0x3 << 9)
+#define OTG_SYS_REFCLKSEL_XTAL			(0x0 << 9)
+#define OTG_SYS_REFCLKSEL_EXTL			(0x1 << 9)
+#define OTG_SYS_REFCLKSEL_CLKCORE		(0x2 << 9)
+
+#define OTG_SYS_IDPULLUP_UOTG			(0x1 << 8)
+#define OTG_SYS_COMMON_ON			(0x1 << 7)
+
+#define OTG_SYS_FSEL_MASK			(0x7 << 4)
+#define OTG_SYS_FSEL(_x)			((_x) << 4)
+
+#define OTG_SYS_FORCESLEEP			(0x1 << 3)
+#define OTG_SYS_OTGDISABLE			(0x1 << 2)
+#define OTG_SYS_SIDDQ_UOTG			(0x1 << 1)
+#define OTG_SYS_FORCESUSPEND			(0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_TUNE			(0x40)
+
+/* EXYNOS5: USB 3.0 DRD */
+#define EXYNOS5_DRD_LINKSYSTEM			(0x04)
+
+#define LINKSYSTEM_FLADJ_MASK			(0x3f << 1)
+#define LINKSYSTEM_FLADJ(_x)			((_x) << 1)
+#define LINKSYSTEM_XHCI_VERSION_CONTROL		(0x1 << 27)
+
+#define EXYNOS5_DRD_PHYUTMI			(0x08)
+
+#define PHYUTMI_OTGDISABLE			(0x1 << 6)
+#define PHYUTMI_FORCESUSPEND			(0x1 << 1)
+#define PHYUTMI_FORCESLEEP			(0x1 << 0)
+
+#define EXYNOS5_DRD_PHYPIPE			(0x0c)
+
+#define EXYNOS5_DRD_PHYCLKRST			(0x10)
+
+#define PHYCLKRST_SSC_REFCLKSEL_MASK		(0xff << 23)
+#define PHYCLKRST_SSC_REFCLKSEL(_x)		((_x) << 23)
+
+#define PHYCLKRST_SSC_RANGE_MASK		(0x03 << 21)
+#define PHYCLKRST_SSC_RANGE(_x)			((_x) << 21)
+
+#define PHYCLKRST_SSC_EN			(0x1 << 20)
+#define PHYCLKRST_REF_SSP_EN			(0x1 << 19)
+#define PHYCLKRST_REF_CLKDIV2			(0x1 << 18)
+
+#define PHYCLKRST_MPLL_MULTIPLIER_MASK		(0x7f << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF	(0x19 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF	(0x02 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF	(0x68 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF	(0x7d << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF	(0x02 << 11)
+
+#define PHYCLKRST_FSEL_MASK			(0x3f << 5)
+#define PHYCLKRST_FSEL(_x)			((_x) << 5)
+#define PHYCLKRST_FSEL_PAD_100MHZ		(0x27 << 5)
+#define PHYCLKRST_FSEL_PAD_24MHZ		(0x2a << 5)
+#define PHYCLKRST_FSEL_PAD_20MHZ		(0x31 << 5)
+#define PHYCLKRST_FSEL_PAD_19_2MHZ		(0x38 << 5)
+
+#define PHYCLKRST_RETENABLEN			(0x1 << 4)
+
+#define PHYCLKRST_REFCLKSEL_MASK		(0x03 << 2)
+#define PHYCLKRST_REFCLKSEL_PAD_REFCLK		(0x2 << 2)
+#define PHYCLKRST_REFCLKSEL_EXT_REFCLK		(0x3 << 2)
+
+#define PHYCLKRST_PORTRESET			(0x1 << 1)
+#define PHYCLKRST_COMMONONN			(0x1 << 0)
+
+#define EXYNOS5_DRD_PHYREG0			(0x14)
+#define EXYNOS5_DRD_PHYREG1			(0x18)
+
+#define EXYNOS5_DRD_PHYPARAM0			(0x1c)
+
+#define PHYPARAM0_REF_USE_PAD			(0x1 << 31)
+#define PHYPARAM0_REF_LOSLEVEL_MASK		(0x1f << 26)
+#define PHYPARAM0_REF_LOSLEVEL			(0x9 << 26)
+
+#define EXYNOS5_DRD_PHYPARAM1			(0x20)
+
+#define PHYPARAM1_PCS_TXDEEMPH_MASK		(0x1f << 0)
+#define PHYPARAM1_PCS_TXDEEMPH			(0x1c)
+
+#define EXYNOS5_DRD_PHYTERM			(0x24)
+
+#define EXYNOS5_DRD_PHYTEST			(0x28)
+
+#define PHYTEST_POWERDOWN_SSP			(0x1 << 3)
+#define PHYTEST_POWERDOWN_HSP			(0x1 << 2)
+
+#define EXYNOS5_DRD_PHYADP			(0x2c)
+
+#define EXYNOS5_DRD_PHYBATCHG			(0x30)
+
+#define PHYBATCHG_UTMI_CLKSEL			(0x1 << 2)
+
+#define EXYNOS5_DRD_PHYRESUME			(0x34)
+#define EXYNOS5_DRD_LINKPORT			(0x44)
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#ifndef KHZ
+#define KHZ (1000)
+#endif
+
+#define EXYNOS_USBHOST_PHY_CTRL_OFFSET		(0x4)
+#define S3C64XX_USBPHY_ENABLE			(0x1 << 16)
+#define EXYNOS_USBPHY_ENABLE			(0x1 << 0)
+#define EXYNOS_USB20PHY_CFG_HOST_LINK		(0x1 << 0)
+
+enum samsung_cpu_type {
+	TYPE_S3C64XX,
+	TYPE_EXYNOS4210,
+	TYPE_EXYNOS5250,
+};
+
+/*
+ * struct samsung_usbphy_drvdata - driver data for various SoC variants
+ * @cpu_type: machine identifier
+ * @devphy_en_mask: device phy enable mask for PHY CONTROL register
+ * @hostphy_en_mask: host phy enable mask for PHY CONTROL register
+ * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
+ *		       mapped address of system controller.
+ * @hostphy_reg_offset: offset to HOST PHY CONTROL register from
+ *		       mapped address of system controller.
+ *
+ *	Here we have a separate mask for device type phy.
+ *	Having different masks for host and device type phy helps
+ *	in setting independent masks in case of SoCs like S5PV210,
+ *	in which PHY0 and PHY1 enable bits belong to same register
+ *	placed at position 0 and 1 respectively.
+ *	Although for newer SoCs like exynos these bits belong to
+ *	different registers altogether placed at position 0.
+ */
+struct samsung_usbphy_drvdata {
+	int cpu_type;
+	int devphy_en_mask;
+	int hostphy_en_mask;
+	u32 devphy_reg_offset;
+	u32 hostphy_reg_offset;
+};
+
+/*
+ * struct samsung_usbphy - transceiver driver state
+ * @phy: transceiver structure
+ * @plat: platform data
+ * @dev: The parent device supplied to the probe function
+ * @clk: usb phy clock
+ * @regs: usb phy controller registers memory base
+ * @pmuregs: USB device PHY_CONTROL register memory base
+ * @sysreg: USB2.0 PHY_CFG register memory base
+ * @ref_clk_freq: reference clock frequency selection
+ * @drv_data: driver data available for different SoCs
+ * @phy_type: Samsung SoCs specific phy types:	#HOST
+ *						#DEVICE
+ * @phy_usage: usage count for phy
+ * @lock: lock for phy operations
+ */
+struct samsung_usbphy {
+	struct usb_phy	phy;
+	struct samsung_usbphy_data *plat;
+	struct device	*dev;
+	struct clk	*clk;
+	void __iomem	*regs;
+	void __iomem	*pmuregs;
+	void __iomem	*sysreg;
+	int		ref_clk_freq;
+	const struct samsung_usbphy_drvdata *drv_data;
+	enum samsung_usb_phy_type phy_type;
+	atomic_t	phy_usage;
+	spinlock_t	lock;
+};
+
+#define phy_to_sphy(x)		container_of((x), struct samsung_usbphy, phy)
+
+static const struct of_device_id samsung_usbphy_dt_match[];
+
+static inline const struct samsung_usbphy_drvdata
+*samsung_usbphy_get_driver_data(struct platform_device *pdev)
+{
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(samsung_usbphy_dt_match,
+							pdev->dev.of_node);
+		return match->data;
+	}
+
+	return (struct samsung_usbphy_drvdata *)
+				platform_get_device_id(pdev)->driver_data;
+}
+
+extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
+extern void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on);
+extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
+extern int samsung_usbphy_set_type(struct usb_phy *phy,
+					enum samsung_usb_phy_type phy_type);
+extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy);
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
new file mode 100644
index 000000000000..45ffe036dacc
--- /dev/null
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -0,0 +1,509 @@
+/* linux/drivers/usb/phy/phy-samsung-usb2.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Author: Praveen Paneri <p.paneri@samsung.com>
+ *
+ * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
+ * OHCI-EXYNOS controllers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/samsung_usb_phy.h>
+#include <linux/platform_data/samsung-usbphy.h>
+
+#include "phy-samsung-usb.h"
+
+static int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	if (!otg)
+		return -ENODEV;
+
+	if (!otg->host)
+		otg->host = host;
+
+	return 0;
+}
+
+static bool exynos5_phyhost_is_on(void __iomem *regs)
+{
+	u32 reg;
+
+	reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+
+	return !(reg & HOST_CTRL0_SIDDQ);
+}
+
+static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phyclk = sphy->ref_clk_freq;
+	u32 phyhost;
+	u32 phyotg;
+	u32 phyhsic;
+	u32 ehcictrl;
+	u32 ohcictrl;
+
+	/*
+	 * phy_usage helps in keeping usage count for phy
+	 * so that the first consumer enabling the phy is also
+	 * the last consumer to disable it.
+	 */
+
+	atomic_inc(&sphy->phy_usage);
+
+	if (exynos5_phyhost_is_on(regs)) {
+		dev_info(sphy->dev, "Already power on PHY\n");
+		return;
+	}
+
+	/* Host configuration */
+	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+
+	/* phy reference clock configuration */
+	phyhost &= ~HOST_CTRL0_FSEL_MASK;
+	phyhost |= HOST_CTRL0_FSEL(phyclk);
+
+	/* host phy reset */
+	phyhost &= ~(HOST_CTRL0_PHYSWRST |
+			HOST_CTRL0_PHYSWRSTALL |
+			HOST_CTRL0_SIDDQ |
+			/* Enable normal mode of operation */
+			HOST_CTRL0_FORCESUSPEND |
+			HOST_CTRL0_FORCESLEEP);
+
+	/* Link reset */
+	phyhost |= (HOST_CTRL0_LINKSWRST |
+			HOST_CTRL0_UTMISWRST |
+			/* COMMON Block configuration during suspend */
+			HOST_CTRL0_COMMONON_N);
+	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+	udelay(10);
+	phyhost &= ~(HOST_CTRL0_LINKSWRST |
+			HOST_CTRL0_UTMISWRST);
+	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+	/* OTG configuration */
+	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+
+	/* phy reference clock configuration */
+	phyotg &= ~OTG_SYS_FSEL_MASK;
+	phyotg |= OTG_SYS_FSEL(phyclk);
+
+	/* Enable normal mode of operation */
+	phyotg &= ~(OTG_SYS_FORCESUSPEND |
+			OTG_SYS_SIDDQ_UOTG |
+			OTG_SYS_FORCESLEEP |
+			OTG_SYS_REFCLKSEL_MASK |
+			/* COMMON Block configuration during suspend */
+			OTG_SYS_COMMON_ON);
+
+	/* OTG phy & link reset */
+	phyotg |= (OTG_SYS_PHY0_SWRST |
+			OTG_SYS_LINKSWRST_UOTG |
+			OTG_SYS_PHYLINK_SWRESET |
+			OTG_SYS_OTGDISABLE |
+			/* Set phy refclk */
+			OTG_SYS_REFCLKSEL_CLKCORE);
+
+	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+	udelay(10);
+	phyotg &= ~(OTG_SYS_PHY0_SWRST |
+			OTG_SYS_LINKSWRST_UOTG |
+			OTG_SYS_PHYLINK_SWRESET);
+	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+
+	/* HSIC phy configuration */
+	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+			HSIC_CTRL_REFCLKSEL |
+			HSIC_CTRL_PHYSWRST);
+	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+	udelay(10);
+	phyhsic &= ~HSIC_CTRL_PHYSWRST;
+	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+	udelay(80);
+
+	/* enable EHCI DMA burst */
+	ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
+	ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
+				HOST_EHCICTRL_ENAINCR4 |
+				HOST_EHCICTRL_ENAINCR8 |
+				HOST_EHCICTRL_ENAINCR16);
+	writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
+
+	/* set ohci_suspend_on_n */
+	ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
+	ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
+	writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
+}
+
+static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phypwr;
+	u32 phyclk;
+	u32 rstcon;
+
+	/* set clock frequency for PLL */
+	phyclk = sphy->ref_clk_freq;
+	phypwr = readl(regs + SAMSUNG_PHYPWR);
+	rstcon = readl(regs + SAMSUNG_RSTCON);
+
+	switch (sphy->drv_data->cpu_type) {
+	case TYPE_S3C64XX:
+		phyclk &= ~PHYCLK_COMMON_ON_N;
+		phypwr &= ~PHYPWR_NORMAL_MASK;
+		rstcon |= RSTCON_SWRST;
+		break;
+	case TYPE_EXYNOS4210:
+		phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
+		rstcon |= RSTCON_SWRST;
+	default:
+		break;
+	}
+
+	writel(phyclk, regs + SAMSUNG_PHYCLK);
+	/* Configure PHY0 for normal operation*/
+	writel(phypwr, regs + SAMSUNG_PHYPWR);
+	/* reset all ports of PHY and Link */
+	writel(rstcon, regs + SAMSUNG_RSTCON);
+	udelay(10);
+	rstcon &= ~RSTCON_SWRST;
+	writel(rstcon, regs + SAMSUNG_RSTCON);
+}
+
+static void samsung_exynos5_usb2phy_disable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phyhost;
+	u32 phyotg;
+	u32 phyhsic;
+
+	if (atomic_dec_return(&sphy->phy_usage) > 0) {
+		dev_info(sphy->dev, "still being used\n");
+		return;
+	}
+
+	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+			HSIC_CTRL_REFCLKSEL |
+			HSIC_CTRL_SIDDQ |
+			HSIC_CTRL_FORCESLEEP |
+			HSIC_CTRL_FORCESUSPEND);
+	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+	phyhost |= (HOST_CTRL0_SIDDQ |
+			HOST_CTRL0_FORCESUSPEND |
+			HOST_CTRL0_FORCESLEEP |
+			HOST_CTRL0_PHYSWRST |
+			HOST_CTRL0_PHYSWRSTALL);
+	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+	phyotg |= (OTG_SYS_FORCESUSPEND |
+			OTG_SYS_SIDDQ_UOTG |
+			OTG_SYS_FORCESLEEP);
+	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+}
+
+static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phypwr;
+
+	phypwr = readl(regs + SAMSUNG_PHYPWR);
+
+	switch (sphy->drv_data->cpu_type) {
+	case TYPE_S3C64XX:
+		phypwr |= PHYPWR_NORMAL_MASK;
+		break;
+	case TYPE_EXYNOS4210:
+		phypwr |= PHYPWR_NORMAL_MASK_PHY0;
+	default:
+		break;
+	}
+
+	/* Disable analog and otg block power */
+	writel(phypwr, regs + SAMSUNG_PHYPWR);
+}
+
+/*
+ * The function passed to the usb driver for phy initialization
+ */
+static int samsung_usb2phy_init(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+	struct usb_bus *host = NULL;
+	unsigned long flags;
+	int ret = 0;
+
+	sphy = phy_to_sphy(phy);
+
+	host = phy->otg->host;
+
+	/* Enable the phy clock */
+	ret = clk_prepare_enable(sphy->clk);
+	if (ret) {
+		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+		return ret;
+	}
+
+	spin_lock_irqsave(&sphy->lock, flags);
+
+	if (host) {
+		/* setting default phy-type for USB 2.0 */
+		if (!strstr(dev_name(host->controller), "ehci") ||
+				!strstr(dev_name(host->controller), "ohci"))
+			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
+	} else {
+		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+	}
+
+	/* Disable phy isolation */
+	if (sphy->plat && sphy->plat->pmu_isolation)
+		sphy->plat->pmu_isolation(false);
+	else
+		samsung_usbphy_set_isolation(sphy, false);
+
+	/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
+	samsung_usbphy_cfg_sel(sphy);
+
+	/* Initialize usb phy registers */
+	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
+		samsung_exynos5_usb2phy_enable(sphy);
+	else
+		samsung_usb2phy_enable(sphy);
+
+	spin_unlock_irqrestore(&sphy->lock, flags);
+
+	/* Disable the phy clock */
+	clk_disable_unprepare(sphy->clk);
+
+	return ret;
+}
+
+/*
+ * The function passed to the usb driver for phy shutdown
+ */
+static void samsung_usb2phy_shutdown(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+	struct usb_bus *host = NULL;
+	unsigned long flags;
+
+	sphy = phy_to_sphy(phy);
+
+	host = phy->otg->host;
+
+	if (clk_prepare_enable(sphy->clk)) {
+		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+		return;
+	}
+
+	spin_lock_irqsave(&sphy->lock, flags);
+
+	if (host) {
+		/* setting default phy-type for USB 2.0 */
+		if (!strstr(dev_name(host->controller), "ehci") ||
+				!strstr(dev_name(host->controller), "ohci"))
+			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
+	} else {
+		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+	}
+
+	/* De-initialize usb phy registers */
+	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
+		samsung_exynos5_usb2phy_disable(sphy);
+	else
+		samsung_usb2phy_disable(sphy);
+
+	/* Enable phy isolation */
+	if (sphy->plat && sphy->plat->pmu_isolation)
+		sphy->plat->pmu_isolation(true);
+	else
+		samsung_usbphy_set_isolation(sphy, true);
+
+	spin_unlock_irqrestore(&sphy->lock, flags);
+
+	clk_disable_unprepare(sphy->clk);
+}
+
+static int samsung_usb2phy_probe(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy;
+	struct usb_otg *otg;
+	struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
+	const struct samsung_usbphy_drvdata *drv_data;
+	struct device *dev = &pdev->dev;
+	struct resource *phy_mem;
+	void __iomem	*phy_base;
+	struct clk *clk;
+	int ret;
+
+	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!phy_mem) {
+		dev_err(dev, "%s: missing mem resource\n", __func__);
+		return -ENODEV;
+	}
+
+	phy_base = devm_ioremap_resource(dev, phy_mem);
+	if (IS_ERR(phy_base))
+		return PTR_ERR(phy_base);
+
+	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
+	if (!sphy)
+		return -ENOMEM;
+
+	otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	drv_data = samsung_usbphy_get_driver_data(pdev);
+
+	if (drv_data->cpu_type == TYPE_EXYNOS5250)
+		clk = devm_clk_get(dev, "usbhost");
+	else
+		clk = devm_clk_get(dev, "otg");
+
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Failed to get otg clock\n");
+		return PTR_ERR(clk);
+	}
+
+	sphy->dev = dev;
+
+	if (dev->of_node) {
+		ret = samsung_usbphy_parse_dt(sphy);
+		if (ret < 0)
+			return ret;
+	} else {
+		if (!pdata) {
+			dev_err(dev, "no platform data specified\n");
+			return -EINVAL;
+		}
+	}
+
+	sphy->plat		= pdata;
+	sphy->regs		= phy_base;
+	sphy->clk		= clk;
+	sphy->drv_data		= drv_data;
+	sphy->phy.dev		= sphy->dev;
+	sphy->phy.label		= "samsung-usb2phy";
+	sphy->phy.init		= samsung_usb2phy_init;
+	sphy->phy.shutdown	= samsung_usb2phy_shutdown;
+	sphy->ref_clk_freq	= samsung_usbphy_get_refclk_freq(sphy);
+
+	sphy->phy.otg		= otg;
+	sphy->phy.otg->phy	= &sphy->phy;
+	sphy->phy.otg->set_host = samsung_usbphy_set_host;
+
+	spin_lock_init(&sphy->lock);
+
+	platform_set_drvdata(pdev, sphy);
+
+	return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
+}
+
+static int samsung_usb2phy_remove(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&sphy->phy);
+
+	if (sphy->pmuregs)
+		iounmap(sphy->pmuregs);
+	if (sphy->sysreg)
+		iounmap(sphy->sysreg);
+
+	return 0;
+}
+
+static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
+	.cpu_type		= TYPE_S3C64XX,
+	.devphy_en_mask		= S3C64XX_USBPHY_ENABLE,
+};
+
+static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
+	.cpu_type		= TYPE_EXYNOS4210,
+	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
+	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
+};
+
+static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
+	.cpu_type		= TYPE_EXYNOS5250,
+	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
+	.hostphy_reg_offset	= EXYNOS_USBHOST_PHY_CTRL_OFFSET,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_usbphy_dt_match[] = {
+	{
+		.compatible = "samsung,s3c64xx-usb2phy",
+		.data = &usb2phy_s3c64xx,
+	}, {
+		.compatible = "samsung,exynos4210-usb2phy",
+		.data = &usb2phy_exynos4,
+	}, {
+		.compatible = "samsung,exynos5250-usb2phy",
+		.data = &usb2phy_exynos5
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
+#endif
+
+static struct platform_device_id samsung_usbphy_driver_ids[] = {
+	{
+		.name		= "s3c64xx-usb2phy",
+		.driver_data	= (unsigned long)&usb2phy_s3c64xx,
+	}, {
+		.name		= "exynos4210-usb2phy",
+		.driver_data	= (unsigned long)&usb2phy_exynos4,
+	}, {
+		.name		= "exynos5250-usb2phy",
+		.driver_data	= (unsigned long)&usb2phy_exynos5,
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
+
+static struct platform_driver samsung_usb2phy_driver = {
+	.probe		= samsung_usb2phy_probe,
+	.remove		= samsung_usb2phy_remove,
+	.id_table	= samsung_usbphy_driver_ids,
+	.driver		= {
+		.name	= "samsung-usb2phy",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
+	},
+};
+
+module_platform_driver(samsung_usb2phy_driver);
+
+MODULE_DESCRIPTION("Samsung USB 2.0 phy controller");
+MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-usb2phy");
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
new file mode 100644
index 000000000000..133f3d0c554f
--- /dev/null
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -0,0 +1,347 @@
+/* linux/drivers/usb/phy/phy-samsung-usb3.c
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Author: Vivek Gautam <gautam.vivek@samsung.com>
+ *
+ * Samsung USB 3.0 PHY transceiver; talks to DWC3 controller.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/usb/samsung_usb_phy.h>
+#include <linux/platform_data/samsung-usbphy.h>
+
+#include "phy-samsung-usb.h"
+
+/*
+ * Sets the phy clk as EXTREFCLK (XXTI) which is internal clock from clock core.
+ */
+static u32 samsung_usb3phy_set_refclk(struct samsung_usbphy *sphy)
+{
+	u32 reg;
+	u32 refclk;
+
+	refclk = sphy->ref_clk_freq;
+
+	reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
+		PHYCLKRST_FSEL(refclk);
+
+	switch (refclk) {
+	case FSEL_CLKSEL_50M:
+		reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
+			PHYCLKRST_SSC_REFCLKSEL(0x00));
+		break;
+	case FSEL_CLKSEL_20M:
+		reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
+			PHYCLKRST_SSC_REFCLKSEL(0x00));
+		break;
+	case FSEL_CLKSEL_19200K:
+		reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
+			PHYCLKRST_SSC_REFCLKSEL(0x88));
+		break;
+	case FSEL_CLKSEL_24M:
+	default:
+		reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
+			PHYCLKRST_SSC_REFCLKSEL(0x88));
+		break;
+	}
+
+	return reg;
+}
+
+static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phyparam0;
+	u32 phyparam1;
+	u32 linksystem;
+	u32 phybatchg;
+	u32 phytest;
+	u32 phyclkrst;
+
+	/* Reset USB 3.0 PHY */
+	writel(0x0, regs + EXYNOS5_DRD_PHYREG0);
+
+	phyparam0 = readl(regs + EXYNOS5_DRD_PHYPARAM0);
+	/* Select PHY CLK source */
+	phyparam0 &= ~PHYPARAM0_REF_USE_PAD;
+	/* Set Loss-of-Signal Detector sensitivity */
+	phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
+	phyparam0 |= PHYPARAM0_REF_LOSLEVEL;
+	writel(phyparam0, regs + EXYNOS5_DRD_PHYPARAM0);
+
+	writel(0x0, regs + EXYNOS5_DRD_PHYRESUME);
+
+	/*
+	 * Setting the Frame length Adj value[6:1] to default 0x20
+	 * See xHCI 1.0 spec, 5.2.4
+	 */
+	linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL |
+			LINKSYSTEM_FLADJ(0x20);
+	writel(linksystem, regs + EXYNOS5_DRD_LINKSYSTEM);
+
+	phyparam1 = readl(regs + EXYNOS5_DRD_PHYPARAM1);
+	/* Set Tx De-Emphasis level */
+	phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
+	phyparam1 |= PHYPARAM1_PCS_TXDEEMPH;
+	writel(phyparam1, regs + EXYNOS5_DRD_PHYPARAM1);
+
+	phybatchg = readl(regs + EXYNOS5_DRD_PHYBATCHG);
+	phybatchg |= PHYBATCHG_UTMI_CLKSEL;
+	writel(phybatchg, regs + EXYNOS5_DRD_PHYBATCHG);
+
+	/* PHYTEST POWERDOWN Control */
+	phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
+	phytest &= ~(PHYTEST_POWERDOWN_SSP |
+			PHYTEST_POWERDOWN_HSP);
+	writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
+
+	/* UTMI Power Control */
+	writel(PHYUTMI_OTGDISABLE, regs + EXYNOS5_DRD_PHYUTMI);
+
+	phyclkrst = samsung_usb3phy_set_refclk(sphy);
+
+	phyclkrst |= PHYCLKRST_PORTRESET |
+			/* Digital power supply in normal operating mode */
+			PHYCLKRST_RETENABLEN |
+			/* Enable ref clock for SS function */
+			PHYCLKRST_REF_SSP_EN |
+			/* Enable spread spectrum */
+			PHYCLKRST_SSC_EN |
+			/* Power down HS Bias and PLL blocks in suspend mode */
+			PHYCLKRST_COMMONONN;
+
+	writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
+
+	udelay(10);
+
+	phyclkrst &= ~(PHYCLKRST_PORTRESET);
+	writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
+
+	return 0;
+}
+
+static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy)
+{
+	u32 phyutmi;
+	u32 phyclkrst;
+	u32 phytest;
+	void __iomem *regs = sphy->regs;
+
+	phyutmi = PHYUTMI_OTGDISABLE |
+			PHYUTMI_FORCESUSPEND |
+			PHYUTMI_FORCESLEEP;
+	writel(phyutmi, regs + EXYNOS5_DRD_PHYUTMI);
+
+	/* Resetting the PHYCLKRST enable bits to reduce leakage current */
+	phyclkrst = readl(regs + EXYNOS5_DRD_PHYCLKRST);
+	phyclkrst &= ~(PHYCLKRST_REF_SSP_EN |
+			PHYCLKRST_SSC_EN |
+			PHYCLKRST_COMMONONN);
+	writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
+
+	/* Control PHYTEST to remove leakage current */
+	phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
+	phytest |= (PHYTEST_POWERDOWN_SSP |
+			PHYTEST_POWERDOWN_HSP);
+	writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
+}
+
+static int samsung_usb3phy_init(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+	unsigned long flags;
+	int ret = 0;
+
+	sphy = phy_to_sphy(phy);
+
+	/* Enable the phy clock */
+	ret = clk_prepare_enable(sphy->clk);
+	if (ret) {
+		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+		return ret;
+	}
+
+	spin_lock_irqsave(&sphy->lock, flags);
+
+	/* setting default phy-type for USB 3.0 */
+	samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+
+	/* Disable phy isolation */
+	samsung_usbphy_set_isolation(sphy, false);
+
+	/* Initialize usb phy registers */
+	samsung_exynos5_usb3phy_enable(sphy);
+
+	spin_unlock_irqrestore(&sphy->lock, flags);
+
+	/* Disable the phy clock */
+	clk_disable_unprepare(sphy->clk);
+
+	return ret;
+}
+
+/*
+ * The function passed to the usb driver for phy shutdown
+ */
+static void samsung_usb3phy_shutdown(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+	unsigned long flags;
+
+	sphy = phy_to_sphy(phy);
+
+	if (clk_prepare_enable(sphy->clk)) {
+		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+		return;
+	}
+
+	spin_lock_irqsave(&sphy->lock, flags);
+
+	/* setting default phy-type for USB 3.0 */
+	samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+
+	/* De-initialize usb phy registers */
+	samsung_exynos5_usb3phy_disable(sphy);
+
+	/* Enable phy isolation */
+	samsung_usbphy_set_isolation(sphy, true);
+
+	spin_unlock_irqrestore(&sphy->lock, flags);
+
+	clk_disable_unprepare(sphy->clk);
+}
+
+static int samsung_usb3phy_probe(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy;
+	struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct resource *phy_mem;
+	void __iomem	*phy_base;
+	struct clk *clk;
+	int ret;
+
+	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!phy_mem) {
+		dev_err(dev, "%s: missing mem resource\n", __func__);
+		return -ENODEV;
+	}
+
+	phy_base = devm_ioremap_resource(dev, phy_mem);
+	if (IS_ERR(phy_base))
+		return PTR_ERR(phy_base);
+
+	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
+	if (!sphy)
+		return -ENOMEM;
+
+	clk = devm_clk_get(dev, "usbdrd30");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Failed to get device clock\n");
+		return PTR_ERR(clk);
+	}
+
+	sphy->dev = dev;
+
+	if (dev->of_node) {
+		ret = samsung_usbphy_parse_dt(sphy);
+		if (ret < 0)
+			return ret;
+	} else {
+		if (!pdata) {
+			dev_err(dev, "no platform data specified\n");
+			return -EINVAL;
+		}
+	}
+
+	sphy->plat		= pdata;
+	sphy->regs		= phy_base;
+	sphy->clk		= clk;
+	sphy->phy.dev		= sphy->dev;
+	sphy->phy.label		= "samsung-usb3phy";
+	sphy->phy.init		= samsung_usb3phy_init;
+	sphy->phy.shutdown	= samsung_usb3phy_shutdown;
+	sphy->drv_data		= samsung_usbphy_get_driver_data(pdev);
+	sphy->ref_clk_freq	= samsung_usbphy_get_refclk_freq(sphy);
+
+	spin_lock_init(&sphy->lock);
+
+	platform_set_drvdata(pdev, sphy);
+
+	return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB3);
+}
+
+static int samsung_usb3phy_remove(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&sphy->phy);
+
+	if (sphy->pmuregs)
+		iounmap(sphy->pmuregs);
+	if (sphy->sysreg)
+		iounmap(sphy->sysreg);
+
+	return 0;
+}
+
+static struct samsung_usbphy_drvdata usb3phy_exynos5 = {
+	.cpu_type		= TYPE_EXYNOS5250,
+	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_usbphy_dt_match[] = {
+	{
+		.compatible = "samsung,exynos5250-usb3phy",
+		.data = &usb3phy_exynos5
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
+#endif
+
+static struct platform_device_id samsung_usbphy_driver_ids[] = {
+	{
+		.name		= "exynos5250-usb3phy",
+		.driver_data	= (unsigned long)&usb3phy_exynos5,
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
+
+static struct platform_driver samsung_usb3phy_driver = {
+	.probe		= samsung_usb3phy_probe,
+	.remove		= samsung_usb3phy_remove,
+	.id_table	= samsung_usbphy_driver_ids,
+	.driver		= {
+		.name	= "samsung-usb3phy",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
+	},
+};
+
+module_platform_driver(samsung_usb3phy_driver);
+
+MODULE_DESCRIPTION("Samsung USB 3.0 phy controller");
+MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-usb3phy");
diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/phy-tegra-usb.c
index 5487d38481af..5487d38481af 100644
--- a/drivers/usb/phy/tegra_usb_phy.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/phy/phy-twl4030-usb.c
index 24d573a134b1..8f78d2d40722 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/phy/phy-twl4030-usb.c
@@ -163,6 +163,8 @@ struct twl4030_usb {
 	bool			vbus_supplied;
 	u8			asleep;
 	bool			irq_enabled;
+
+	struct delayed_work	id_workaround_work;
 };
 
 /* internal define on top of container_of */
@@ -246,6 +248,25 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
 
 /*-------------------------------------------------------------------------*/
 
+static bool twl4030_is_driving_vbus(struct twl4030_usb *twl)
+{
+	int ret;
+
+	ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS);
+	if (ret < 0 || !(ret & PHY_DPLL_CLK))
+		/*
+		 * if clocks are off, registers are not updated,
+		 * but we can assume we don't drive VBUS in this case
+		 */
+		return false;
+
+	ret = twl4030_usb_read(twl, ULPI_OTG_CTRL);
+	if (ret < 0)
+		return false;
+
+	return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false;
+}
+
 static enum omap_musb_vbus_id_status
 	twl4030_usb_linkstat(struct twl4030_usb *twl)
 {
@@ -268,13 +289,19 @@ static enum omap_musb_vbus_id_status
 	if (status < 0)
 		dev_err(twl->dev, "USB link status err %d\n", status);
 	else if (status & (BIT(7) | BIT(2))) {
-		if (status & (BIT(7)))
-                        twl->vbus_supplied = true;
+		if (status & BIT(7)) {
+			if (twl4030_is_driving_vbus(twl))
+				status &= ~BIT(7);
+			else
+				twl->vbus_supplied = true;
+		}
 
 		if (status & BIT(2))
 			linkstat = OMAP_MUSB_ID_GROUND;
-		else
+		else if (status & BIT(7))
 			linkstat = OMAP_MUSB_VBUS_VALID;
+		else
+			linkstat = OMAP_MUSB_VBUS_OFF;
 	} else {
 		if (twl->linkstat != OMAP_MUSB_UNKNOWN)
 			linkstat = OMAP_MUSB_VBUS_OFF;
@@ -287,10 +314,6 @@ static enum omap_musb_vbus_id_status
 	 * are registered, and that both are active...
 	 */
 
-	spin_lock_irq(&twl->lock);
-	twl->linkstat = linkstat;
-	spin_unlock_irq(&twl->lock);
-
 	return linkstat;
 }
 
@@ -361,9 +384,17 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
 
 static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 {
+	int ret;
+
 	if (on) {
-		regulator_enable(twl->usb3v1);
-		regulator_enable(twl->usb1v8);
+		ret = regulator_enable(twl->usb3v1);
+		if (ret)
+			dev_err(twl->dev, "Failed to enable usb3v1\n");
+
+		ret = regulator_enable(twl->usb1v8);
+		if (ret)
+			dev_err(twl->dev, "Failed to enable usb1v8\n");
+
 		/*
 		 * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
 		 * in twl4030) resets the VUSB_DEDICATED2 register. This reset
@@ -372,7 +403,11 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 		 * is re-activated. This ensures that VUSB3V1 is really active.
 		 */
 		twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
-		regulator_enable(twl->usb1v5);
+
+		ret = regulator_enable(twl->usb1v5);
+		if (ret)
+			dev_err(twl->dev, "Failed to enable usb1v5\n");
+
 		__twl4030_phy_power(twl, 1);
 		twl4030_usb_write(twl, PHY_CLK_CTRL,
 				  twl4030_usb_read(twl, PHY_CLK_CTRL) |
@@ -412,6 +447,16 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
 	__twl4030_phy_resume(twl);
 	twl->asleep = 0;
 	dev_dbg(twl->dev, "%s\n", __func__);
+
+	/*
+	 * XXX When VBUS gets driven after musb goes to A mode,
+	 * ID_PRES related interrupts no longer arrive, why?
+	 * Register itself is updated fine though, so we must poll.
+	 */
+	if (twl->linkstat == OMAP_MUSB_ID_GROUND) {
+		cancel_delayed_work(&twl->id_workaround_work);
+		schedule_delayed_work(&twl->id_workaround_work, HZ);
+	}
 }
 
 static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
@@ -432,7 +477,7 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 	/* Initialize 3.1V regulator */
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
 
-	twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
+	twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1");
 	if (IS_ERR(twl->usb3v1))
 		return -ENODEV;
 
@@ -441,18 +486,18 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 	/* Initialize 1.5V regulator */
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
 
-	twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
+	twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5");
 	if (IS_ERR(twl->usb1v5))
-		goto fail1;
+		return -ENODEV;
 
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 
 	/* Initialize 1.8V regulator */
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
 
-	twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
+	twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8");
 	if (IS_ERR(twl->usb1v8))
-		goto fail2;
+		return -ENODEV;
 
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 
@@ -461,14 +506,6 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 			 TWL4030_PM_MASTER_PROTECT_KEY);
 
 	return 0;
-
-fail2:
-	regulator_put(twl->usb1v5);
-	twl->usb1v5 = NULL;
-fail1:
-	regulator_put(twl->usb3v1);
-	twl->usb3v1 = NULL;
-	return -ENODEV;
 }
 
 static ssize_t twl4030_usb_vbus_show(struct device *dev,
@@ -491,9 +528,18 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 {
 	struct twl4030_usb *twl = _twl;
 	enum omap_musb_vbus_id_status status;
+	bool status_changed = false;
 
 	status = twl4030_usb_linkstat(twl);
-	if (status > 0) {
+
+	spin_lock_irq(&twl->lock);
+	if (status >= 0 && status != twl->linkstat) {
+		twl->linkstat = status;
+		status_changed = true;
+	}
+	spin_unlock_irq(&twl->lock);
+
+	if (status_changed) {
 		/* FIXME add a set_power() method so that B-devices can
 		 * configure the charger appropriately.  It's not always
 		 * correct to consume VBUS power, and how much current to
@@ -505,37 +551,62 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 		 * USB_LINK_VBUS state.  musb_hdrc won't care until it
 		 * starts to handle softconnect right.
 		 */
-		if (status == OMAP_MUSB_VBUS_OFF ||
-				status == OMAP_MUSB_ID_FLOAT)
-			twl4030_phy_suspend(twl, 0);
-		else
-			twl4030_phy_resume(twl);
-
-		omap_musb_mailbox(twl->linkstat);
+		omap_musb_mailbox(status);
 	}
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 
 	return IRQ_HANDLED;
 }
 
-static void twl4030_usb_phy_init(struct twl4030_usb *twl)
+static void twl4030_id_workaround_work(struct work_struct *work)
 {
+	struct twl4030_usb *twl = container_of(work, struct twl4030_usb,
+		id_workaround_work.work);
 	enum omap_musb_vbus_id_status status;
+	bool status_changed = false;
 
 	status = twl4030_usb_linkstat(twl);
-	if (status > 0) {
-		if (status == OMAP_MUSB_VBUS_OFF ||
-				status == OMAP_MUSB_ID_FLOAT) {
-			__twl4030_phy_power(twl, 0);
-			twl->asleep = 1;
-		} else {
-			__twl4030_phy_resume(twl);
-			twl->asleep = 0;
-		}
 
-		omap_musb_mailbox(twl->linkstat);
+	spin_lock_irq(&twl->lock);
+	if (status >= 0 && status != twl->linkstat) {
+		twl->linkstat = status;
+		status_changed = true;
+	}
+	spin_unlock_irq(&twl->lock);
+
+	if (status_changed) {
+		dev_dbg(twl->dev, "handle missing status change to %d\n",
+				status);
+		omap_musb_mailbox(status);
 	}
+
+	/* don't schedule during sleep - irq works right then */
+	if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) {
+		cancel_delayed_work(&twl->id_workaround_work);
+		schedule_delayed_work(&twl->id_workaround_work, HZ);
+	}
+}
+
+static int twl4030_usb_phy_init(struct usb_phy *phy)
+{
+	struct twl4030_usb *twl = phy_to_twl(phy);
+	enum omap_musb_vbus_id_status status;
+
+	/*
+	 * Start in sleep state, we'll get called through set_suspend()
+	 * callback when musb is runtime resumed and it's time to start.
+	 */
+	__twl4030_phy_power(twl, 0);
+	twl->asleep = 1;
+
+	status = twl4030_usb_linkstat(twl);
+	twl->linkstat = status;
+
+	if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID)
+		omap_musb_mailbox(twl->linkstat);
+
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+	return 0;
 }
 
 static int twl4030_set_suspend(struct usb_phy *x, int suspend)
@@ -612,6 +683,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	twl->phy.otg		= otg;
 	twl->phy.type		= USB_PHY_TYPE_USB2;
 	twl->phy.set_suspend	= twl4030_set_suspend;
+	twl->phy.init		= twl4030_usb_phy_init;
 
 	otg->phy		= &twl->phy;
 	otg->set_host		= twl4030_set_host;
@@ -620,6 +692,8 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	/* init spinlock for workqueue */
 	spin_lock_init(&twl->lock);
 
+	INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work);
+
 	err = twl4030_usb_ldo_init(twl);
 	if (err) {
 		dev_err(&pdev->dev, "ldo init failed\n");
@@ -640,20 +714,15 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	 * need both handles, otherwise just one suffices.
 	 */
 	twl->irq_enabled = true;
-	status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
-			IRQF_ONESHOT, "twl4030_usb", twl);
+	status = devm_request_threaded_irq(twl->dev, twl->irq, NULL,
+			twl4030_usb_irq, IRQF_TRIGGER_FALLING |
+			IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl);
 	if (status < 0) {
 		dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
 			twl->irq, status);
 		return status;
 	}
 
-	/* Power down phy or make it work according to
-	 * current link state.
-	 */
-	twl4030_usb_phy_init(twl);
-
 	dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
 	return 0;
 }
@@ -663,7 +732,7 @@ static int twl4030_usb_remove(struct platform_device *pdev)
 	struct twl4030_usb *twl = platform_get_drvdata(pdev);
 	int val;
 
-	free_irq(twl->irq, twl);
+	cancel_delayed_work(&twl->id_workaround_work);
 	device_remove_file(twl->dev, &dev_attr_vbus);
 
 	/* set transceiver mode to power on defaults */
@@ -685,9 +754,6 @@ static int twl4030_usb_remove(struct platform_device *pdev)
 
 	if (!twl->asleep)
 		twl4030_phy_power(twl, 0);
-	regulator_put(twl->usb1v5);
-	regulator_put(twl->usb1v8);
-	regulator_put(twl->usb3v1);
 
 	return 0;
 }
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 7f3c5b0e3f66..9de7ada90a8b 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -211,6 +211,7 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 	struct twl6030_usb *twl = _twl;
 	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
 	u8 vbus_state, hw_state;
+	int ret;
 
 	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
 
@@ -218,7 +219,10 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 						CONTROLLER_STAT1);
 	if (!(hw_state & STS_USB_ID)) {
 		if (vbus_state & VBUS_DET) {
-			regulator_enable(twl->usb3v3);
+			ret = regulator_enable(twl->usb3v3);
+			if (ret)
+				dev_err(twl->dev, "Failed to enable usb3v3\n");
+
 			twl->asleep = 1;
 			status = OMAP_MUSB_VBUS_VALID;
 			twl->linkstat = status;
@@ -245,12 +249,15 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 	struct twl6030_usb *twl = _twl;
 	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
 	u8 hw_state;
+	int ret;
 
 	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
 
 	if (hw_state & STS_USB_ID) {
+		ret = regulator_enable(twl->usb3v3);
+		if (ret)
+			dev_err(twl->dev, "Failed to enable usb3v3\n");
 
-		regulator_enable(twl->usb3v3);
 		twl->asleep = 1;
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
diff --git a/drivers/usb/otg/ulpi_viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
index c5ba7e5423fc..c5ba7e5423fc 100644
--- a/drivers/usb/otg/ulpi_viewport.c
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/phy/phy-ulpi.c
index 217339dd7a90..217339dd7a90 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/phy/phy-ulpi.c
diff --git a/drivers/usb/otg/otg.c b/drivers/usb/phy/phy.c
index 2bd03d261a50..f52c006417ff 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/phy/phy.c
@@ -1,14 +1,13 @@
 /*
- * otg.c -- USB OTG utility code
+ * phy.c -- USB phy handling
  *
- * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004-2013 Texas Instruments
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/err.h>
@@ -17,7 +16,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 
-#include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
 
 static LIST_HEAD(phy_list);
 static LIST_HEAD(phy_bind_list);
@@ -110,7 +109,7 @@ struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
 
 	return phy;
 }
-EXPORT_SYMBOL(devm_usb_get_phy);
+EXPORT_SYMBOL_GPL(devm_usb_get_phy);
 
 /**
  * usb_get_phy - find the USB PHY
@@ -143,7 +142,7 @@ err0:
 
 	return phy;
 }
-EXPORT_SYMBOL(usb_get_phy);
+EXPORT_SYMBOL_GPL(usb_get_phy);
 
  /**
  * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
@@ -207,7 +206,7 @@ err0:
 
 	return phy;
 }
-EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
+EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle);
 
 /**
  * usb_get_phy_dev - find the USB PHY
@@ -240,7 +239,7 @@ err0:
 
 	return phy;
 }
-EXPORT_SYMBOL(usb_get_phy_dev);
+EXPORT_SYMBOL_GPL(usb_get_phy_dev);
 
 /**
  * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
@@ -270,7 +269,7 @@ struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
 
 	return phy;
 }
-EXPORT_SYMBOL(devm_usb_get_phy_dev);
+EXPORT_SYMBOL_GPL(devm_usb_get_phy_dev);
 
 /**
  * devm_usb_put_phy - release the USB PHY
@@ -289,7 +288,7 @@ void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
 	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
 	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
 }
-EXPORT_SYMBOL(devm_usb_put_phy);
+EXPORT_SYMBOL_GPL(devm_usb_put_phy);
 
 /**
  * usb_put_phy - release the USB PHY
@@ -308,7 +307,7 @@ void usb_put_phy(struct usb_phy *x)
 		module_put(owner);
 	}
 }
-EXPORT_SYMBOL(usb_put_phy);
+EXPORT_SYMBOL_GPL(usb_put_phy);
 
 /**
  * usb_add_phy - declare the USB PHY
@@ -348,7 +347,7 @@ out:
 	spin_unlock_irqrestore(&phy_lock, flags);
 	return ret;
 }
-EXPORT_SYMBOL(usb_add_phy);
+EXPORT_SYMBOL_GPL(usb_add_phy);
 
 /**
  * usb_add_phy_dev - declare the USB PHY
@@ -378,7 +377,7 @@ int usb_add_phy_dev(struct usb_phy *x)
 	spin_unlock_irqrestore(&phy_lock, flags);
 	return 0;
 }
-EXPORT_SYMBOL(usb_add_phy_dev);
+EXPORT_SYMBOL_GPL(usb_add_phy_dev);
 
 /**
  * usb_remove_phy - remove the OTG PHY
@@ -400,7 +399,7 @@ void usb_remove_phy(struct usb_phy *x)
 	}
 	spin_unlock_irqrestore(&phy_lock, flags);
 }
-EXPORT_SYMBOL(usb_remove_phy);
+EXPORT_SYMBOL_GPL(usb_remove_phy);
 
 /**
  * usb_bind_phy - bind the phy and the controller that uses the phy
@@ -437,38 +436,3 @@ int __init usb_bind_phy(const char *dev_name, u8 index,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_bind_phy);
-
-const char *otg_state_string(enum usb_otg_state state)
-{
-	switch (state) {
-	case OTG_STATE_A_IDLE:
-		return "a_idle";
-	case OTG_STATE_A_WAIT_VRISE:
-		return "a_wait_vrise";
-	case OTG_STATE_A_WAIT_BCON:
-		return "a_wait_bcon";
-	case OTG_STATE_A_HOST:
-		return "a_host";
-	case OTG_STATE_A_SUSPEND:
-		return "a_suspend";
-	case OTG_STATE_A_PERIPHERAL:
-		return "a_peripheral";
-	case OTG_STATE_A_WAIT_VFALL:
-		return "a_wait_vfall";
-	case OTG_STATE_A_VBUS_ERR:
-		return "a_vbus_err";
-	case OTG_STATE_B_IDLE:
-		return "b_idle";
-	case OTG_STATE_B_SRP_INIT:
-		return "b_srp_init";
-	case OTG_STATE_B_PERIPHERAL:
-		return "b_peripheral";
-	case OTG_STATE_B_WAIT_ACON:
-		return "b_wait_acon";
-	case OTG_STATE_B_HOST:
-		return "b_host";
-	default:
-		return "UNDEFINED";
-	}
-}
-EXPORT_SYMBOL(otg_state_string);
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
deleted file mode 100644
index 967101ec15fd..000000000000
--- a/drivers/usb/phy/samsung-usbphy.c
+++ /dev/null
@@ -1,928 +0,0 @@
-/* linux/drivers/usb/phy/samsung-usbphy.c
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Author: Praveen Paneri <p.paneri@samsung.com>
- *
- * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
- * OHCI-EXYNOS controllers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/samsung_usb_phy.h>
-#include <linux/platform_data/samsung-usbphy.h>
-
-/* Register definitions */
-
-#define SAMSUNG_PHYPWR				(0x00)
-
-#define PHYPWR_NORMAL_MASK			(0x19 << 0)
-#define PHYPWR_OTG_DISABLE			(0x1 << 4)
-#define PHYPWR_ANALOG_POWERDOWN			(0x1 << 3)
-#define PHYPWR_FORCE_SUSPEND			(0x1 << 1)
-/* For Exynos4 */
-#define PHYPWR_NORMAL_MASK_PHY0			(0x39 << 0)
-#define PHYPWR_SLEEP_PHY0			(0x1 << 5)
-
-#define SAMSUNG_PHYCLK				(0x04)
-
-#define PHYCLK_MODE_USB11			(0x1 << 6)
-#define PHYCLK_EXT_OSC				(0x1 << 5)
-#define PHYCLK_COMMON_ON_N			(0x1 << 4)
-#define PHYCLK_ID_PULL				(0x1 << 2)
-#define PHYCLK_CLKSEL_MASK			(0x3 << 0)
-#define PHYCLK_CLKSEL_48M			(0x0 << 0)
-#define PHYCLK_CLKSEL_12M			(0x2 << 0)
-#define PHYCLK_CLKSEL_24M			(0x3 << 0)
-
-#define SAMSUNG_RSTCON				(0x08)
-
-#define RSTCON_PHYLINK_SWRST			(0x1 << 2)
-#define RSTCON_HLINK_SWRST			(0x1 << 1)
-#define RSTCON_SWRST				(0x1 << 0)
-
-/* EXYNOS5 */
-#define EXYNOS5_PHY_HOST_CTRL0			(0x00)
-
-#define HOST_CTRL0_PHYSWRSTALL			(0x1 << 31)
-
-#define HOST_CTRL0_REFCLKSEL_MASK		(0x3 << 19)
-#define HOST_CTRL0_REFCLKSEL_XTAL		(0x0 << 19)
-#define HOST_CTRL0_REFCLKSEL_EXTL		(0x1 << 19)
-#define HOST_CTRL0_REFCLKSEL_CLKCORE		(0x2 << 19)
-
-#define HOST_CTRL0_FSEL_MASK			(0x7 << 16)
-#define HOST_CTRL0_FSEL(_x)			((_x) << 16)
-
-#define FSEL_CLKSEL_50M				(0x7)
-#define FSEL_CLKSEL_24M				(0x5)
-#define FSEL_CLKSEL_20M				(0x4)
-#define FSEL_CLKSEL_19200K			(0x3)
-#define FSEL_CLKSEL_12M				(0x2)
-#define FSEL_CLKSEL_10M				(0x1)
-#define FSEL_CLKSEL_9600K			(0x0)
-
-#define HOST_CTRL0_TESTBURNIN			(0x1 << 11)
-#define HOST_CTRL0_RETENABLE			(0x1 << 10)
-#define HOST_CTRL0_COMMONON_N			(0x1 << 9)
-#define HOST_CTRL0_SIDDQ			(0x1 << 6)
-#define HOST_CTRL0_FORCESLEEP			(0x1 << 5)
-#define HOST_CTRL0_FORCESUSPEND			(0x1 << 4)
-#define HOST_CTRL0_WORDINTERFACE		(0x1 << 3)
-#define HOST_CTRL0_UTMISWRST			(0x1 << 2)
-#define HOST_CTRL0_LINKSWRST			(0x1 << 1)
-#define HOST_CTRL0_PHYSWRST			(0x1 << 0)
-
-#define EXYNOS5_PHY_HOST_TUNE0			(0x04)
-
-#define EXYNOS5_PHY_HSIC_CTRL1			(0x10)
-
-#define EXYNOS5_PHY_HSIC_TUNE1			(0x14)
-
-#define EXYNOS5_PHY_HSIC_CTRL2			(0x20)
-
-#define EXYNOS5_PHY_HSIC_TUNE2			(0x24)
-
-#define HSIC_CTRL_REFCLKSEL_MASK		(0x3 << 23)
-#define HSIC_CTRL_REFCLKSEL			(0x2 << 23)
-
-#define HSIC_CTRL_REFCLKDIV_MASK		(0x7f << 16)
-#define HSIC_CTRL_REFCLKDIV(_x)			((_x) << 16)
-#define HSIC_CTRL_REFCLKDIV_12			(0x24 << 16)
-#define HSIC_CTRL_REFCLKDIV_15			(0x1c << 16)
-#define HSIC_CTRL_REFCLKDIV_16			(0x1a << 16)
-#define HSIC_CTRL_REFCLKDIV_19_2		(0x15 << 16)
-#define HSIC_CTRL_REFCLKDIV_20			(0x14 << 16)
-
-#define HSIC_CTRL_SIDDQ				(0x1 << 6)
-#define HSIC_CTRL_FORCESLEEP			(0x1 << 5)
-#define HSIC_CTRL_FORCESUSPEND			(0x1 << 4)
-#define HSIC_CTRL_WORDINTERFACE			(0x1 << 3)
-#define HSIC_CTRL_UTMISWRST			(0x1 << 2)
-#define HSIC_CTRL_PHYSWRST			(0x1 << 0)
-
-#define EXYNOS5_PHY_HOST_EHCICTRL		(0x30)
-
-#define HOST_EHCICTRL_ENAINCRXALIGN		(0x1 << 29)
-#define HOST_EHCICTRL_ENAINCR4			(0x1 << 28)
-#define HOST_EHCICTRL_ENAINCR8			(0x1 << 27)
-#define HOST_EHCICTRL_ENAINCR16			(0x1 << 26)
-
-#define EXYNOS5_PHY_HOST_OHCICTRL		(0x34)
-
-#define HOST_OHCICTRL_SUSPLGCY			(0x1 << 3)
-#define HOST_OHCICTRL_APPSTARTCLK		(0x1 << 2)
-#define HOST_OHCICTRL_CNTSEL			(0x1 << 1)
-#define HOST_OHCICTRL_CLKCKTRST			(0x1 << 0)
-
-#define EXYNOS5_PHY_OTG_SYS			(0x38)
-
-#define OTG_SYS_PHYLINK_SWRESET			(0x1 << 14)
-#define OTG_SYS_LINKSWRST_UOTG			(0x1 << 13)
-#define OTG_SYS_PHY0_SWRST			(0x1 << 12)
-
-#define OTG_SYS_REFCLKSEL_MASK			(0x3 << 9)
-#define OTG_SYS_REFCLKSEL_XTAL			(0x0 << 9)
-#define OTG_SYS_REFCLKSEL_EXTL			(0x1 << 9)
-#define OTG_SYS_REFCLKSEL_CLKCORE		(0x2 << 9)
-
-#define OTG_SYS_IDPULLUP_UOTG			(0x1 << 8)
-#define OTG_SYS_COMMON_ON			(0x1 << 7)
-
-#define OTG_SYS_FSEL_MASK			(0x7 << 4)
-#define OTG_SYS_FSEL(_x)			((_x) << 4)
-
-#define OTG_SYS_FORCESLEEP			(0x1 << 3)
-#define OTG_SYS_OTGDISABLE			(0x1 << 2)
-#define OTG_SYS_SIDDQ_UOTG			(0x1 << 1)
-#define OTG_SYS_FORCESUSPEND			(0x1 << 0)
-
-#define EXYNOS5_PHY_OTG_TUNE			(0x40)
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#ifndef KHZ
-#define KHZ (1000)
-#endif
-
-#define EXYNOS_USBHOST_PHY_CTRL_OFFSET		(0x4)
-#define S3C64XX_USBPHY_ENABLE			(0x1 << 16)
-#define EXYNOS_USBPHY_ENABLE			(0x1 << 0)
-#define EXYNOS_USB20PHY_CFG_HOST_LINK		(0x1 << 0)
-
-enum samsung_cpu_type {
-	TYPE_S3C64XX,
-	TYPE_EXYNOS4210,
-	TYPE_EXYNOS5250,
-};
-
-/*
- * struct samsung_usbphy_drvdata - driver data for various SoC variants
- * @cpu_type: machine identifier
- * @devphy_en_mask: device phy enable mask for PHY CONTROL register
- * @hostphy_en_mask: host phy enable mask for PHY CONTROL register
- * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
- *		       mapped address of system controller.
- * @hostphy_reg_offset: offset to HOST PHY CONTROL register from
- *		       mapped address of system controller.
- *
- *	Here we have a separate mask for device type phy.
- *	Having different masks for host and device type phy helps
- *	in setting independent masks in case of SoCs like S5PV210,
- *	in which PHY0 and PHY1 enable bits belong to same register
- *	placed at position 0 and 1 respectively.
- *	Although for newer SoCs like exynos these bits belong to
- *	different registers altogether placed at position 0.
- */
-struct samsung_usbphy_drvdata {
-	int cpu_type;
-	int devphy_en_mask;
-	int hostphy_en_mask;
-	u32 devphy_reg_offset;
-	u32 hostphy_reg_offset;
-};
-
-/*
- * struct samsung_usbphy - transceiver driver state
- * @phy: transceiver structure
- * @plat: platform data
- * @dev: The parent device supplied to the probe function
- * @clk: usb phy clock
- * @regs: usb phy controller registers memory base
- * @pmuregs: USB device PHY_CONTROL register memory base
- * @sysreg: USB2.0 PHY_CFG register memory base
- * @ref_clk_freq: reference clock frequency selection
- * @drv_data: driver data available for different SoCs
- * @phy_type: Samsung SoCs specific phy types:	#HOST
- *						#DEVICE
- * @phy_usage: usage count for phy
- * @lock: lock for phy operations
- */
-struct samsung_usbphy {
-	struct usb_phy	phy;
-	struct samsung_usbphy_data *plat;
-	struct device	*dev;
-	struct clk	*clk;
-	void __iomem	*regs;
-	void __iomem	*pmuregs;
-	void __iomem	*sysreg;
-	int		ref_clk_freq;
-	const struct samsung_usbphy_drvdata *drv_data;
-	enum samsung_usb_phy_type phy_type;
-	atomic_t	phy_usage;
-	spinlock_t	lock;
-};
-
-#define phy_to_sphy(x)		container_of((x), struct samsung_usbphy, phy)
-
-int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
-	if (!otg)
-		return -ENODEV;
-
-	if (!otg->host)
-		otg->host = host;
-
-	return 0;
-}
-
-static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
-{
-	struct device_node *usbphy_sys;
-
-	/* Getting node for system controller interface for usb-phy */
-	usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys");
-	if (!usbphy_sys) {
-		dev_err(sphy->dev, "No sys-controller interface for usb-phy\n");
-		return -ENODEV;
-	}
-
-	sphy->pmuregs = of_iomap(usbphy_sys, 0);
-
-	if (sphy->pmuregs == NULL) {
-		dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
-		goto err0;
-	}
-
-	sphy->sysreg = of_iomap(usbphy_sys, 1);
-
-	/*
-	 * Not returning error code here, since this situation is not fatal.
-	 * Few SoCs may not have this switch available
-	 */
-	if (sphy->sysreg == NULL)
-		dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n");
-
-	of_node_put(usbphy_sys);
-
-	return 0;
-
-err0:
-	of_node_put(usbphy_sys);
-	return -ENXIO;
-}
-
-/*
- * Set isolation here for phy.
- * Here 'on = true' would mean USB PHY block is isolated, hence
- * de-activated and vice-versa.
- */
-static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
-{
-	void __iomem *reg = NULL;
-	u32 reg_val;
-	u32 en_mask = 0;
-
-	if (!sphy->pmuregs) {
-		dev_warn(sphy->dev, "Can't set pmu isolation\n");
-		return;
-	}
-
-	switch (sphy->drv_data->cpu_type) {
-	case TYPE_S3C64XX:
-		/*
-		 * Do nothing: We will add here once S3C64xx goes for DT support
-		 */
-		break;
-	case TYPE_EXYNOS4210:
-		/*
-		 * Fall through since exynos4210 and exynos5250 have similar
-		 * register architecture: two separate registers for host and
-		 * device phy control with enable bit at position 0.
-		 */
-	case TYPE_EXYNOS5250:
-		if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
-			reg = sphy->pmuregs +
-				sphy->drv_data->devphy_reg_offset;
-			en_mask = sphy->drv_data->devphy_en_mask;
-		} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
-			reg = sphy->pmuregs +
-				sphy->drv_data->hostphy_reg_offset;
-			en_mask = sphy->drv_data->hostphy_en_mask;
-		}
-		break;
-	default:
-		dev_err(sphy->dev, "Invalid SoC type\n");
-		return;
-	}
-
-	reg_val = readl(reg);
-
-	if (on)
-		reg_val &= ~en_mask;
-	else
-		reg_val |= en_mask;
-
-	writel(reg_val, reg);
-}
-
-/*
- * Configure the mode of working of usb-phy here: HOST/DEVICE.
- */
-static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
-{
-	u32 reg;
-
-	if (!sphy->sysreg) {
-		dev_warn(sphy->dev, "Can't configure specified phy mode\n");
-		return;
-	}
-
-	reg = readl(sphy->sysreg);
-
-	if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
-		reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
-	else if (sphy->phy_type == USB_PHY_TYPE_HOST)
-		reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;
-
-	writel(reg, sphy->sysreg);
-}
-
-/*
- * PHYs are different for USB Device and USB Host.
- * This make sure that correct PHY type is selected before
- * any operation on PHY.
- */
-static int samsung_usbphy_set_type(struct usb_phy *phy,
-				enum samsung_usb_phy_type phy_type)
-{
-	struct samsung_usbphy *sphy = phy_to_sphy(phy);
-
-	sphy->phy_type = phy_type;
-
-	return 0;
-}
-
-/*
- * Returns reference clock frequency selection value
- */
-static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
-{
-	struct clk *ref_clk;
-	int refclk_freq = 0;
-
-	/*
-	 * In exynos5250 USB host and device PHY use
-	 * external crystal clock XXTI
-	 */
-	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
-		ref_clk = clk_get(sphy->dev, "ext_xtal");
-	else
-		ref_clk = clk_get(sphy->dev, "xusbxti");
-	if (IS_ERR(ref_clk)) {
-		dev_err(sphy->dev, "Failed to get reference clock\n");
-		return PTR_ERR(ref_clk);
-	}
-
-	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) {
-		/* set clock frequency for PLL */
-		switch (clk_get_rate(ref_clk)) {
-		case 9600 * KHZ:
-			refclk_freq = FSEL_CLKSEL_9600K;
-			break;
-		case 10 * MHZ:
-			refclk_freq = FSEL_CLKSEL_10M;
-			break;
-		case 12 * MHZ:
-			refclk_freq = FSEL_CLKSEL_12M;
-			break;
-		case 19200 * KHZ:
-			refclk_freq = FSEL_CLKSEL_19200K;
-			break;
-		case 20 * MHZ:
-			refclk_freq = FSEL_CLKSEL_20M;
-			break;
-		case 50 * MHZ:
-			refclk_freq = FSEL_CLKSEL_50M;
-			break;
-		case 24 * MHZ:
-		default:
-			/* default reference clock */
-			refclk_freq = FSEL_CLKSEL_24M;
-			break;
-		}
-	} else {
-		switch (clk_get_rate(ref_clk)) {
-		case 12 * MHZ:
-			refclk_freq = PHYCLK_CLKSEL_12M;
-			break;
-		case 24 * MHZ:
-			refclk_freq = PHYCLK_CLKSEL_24M;
-			break;
-		case 48 * MHZ:
-			refclk_freq = PHYCLK_CLKSEL_48M;
-			break;
-		default:
-			if (sphy->drv_data->cpu_type == TYPE_S3C64XX)
-				refclk_freq = PHYCLK_CLKSEL_48M;
-			else
-				refclk_freq = PHYCLK_CLKSEL_24M;
-			break;
-		}
-	}
-	clk_put(ref_clk);
-
-	return refclk_freq;
-}
-
-static bool exynos5_phyhost_is_on(void *regs)
-{
-	u32 reg;
-
-	reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	return !(reg & HOST_CTRL0_SIDDQ);
-}
-
-static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phyclk = sphy->ref_clk_freq;
-	u32 phyhost;
-	u32 phyotg;
-	u32 phyhsic;
-	u32 ehcictrl;
-	u32 ohcictrl;
-
-	/*
-	 * phy_usage helps in keeping usage count for phy
-	 * so that the first consumer enabling the phy is also
-	 * the last consumer to disable it.
-	 */
-
-	atomic_inc(&sphy->phy_usage);
-
-	if (exynos5_phyhost_is_on(regs)) {
-		dev_info(sphy->dev, "Already power on PHY\n");
-		return;
-	}
-
-	/* Host configuration */
-	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	/* phy reference clock configuration */
-	phyhost &= ~HOST_CTRL0_FSEL_MASK;
-	phyhost |= HOST_CTRL0_FSEL(phyclk);
-
-	/* host phy reset */
-	phyhost &= ~(HOST_CTRL0_PHYSWRST |
-			HOST_CTRL0_PHYSWRSTALL |
-			HOST_CTRL0_SIDDQ |
-			/* Enable normal mode of operation */
-			HOST_CTRL0_FORCESUSPEND |
-			HOST_CTRL0_FORCESLEEP);
-
-	/* Link reset */
-	phyhost |= (HOST_CTRL0_LINKSWRST |
-			HOST_CTRL0_UTMISWRST |
-			/* COMMON Block configuration during suspend */
-			HOST_CTRL0_COMMONON_N);
-	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-	udelay(10);
-	phyhost &= ~(HOST_CTRL0_LINKSWRST |
-			HOST_CTRL0_UTMISWRST);
-	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	/* OTG configuration */
-	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
-
-	/* phy reference clock configuration */
-	phyotg &= ~OTG_SYS_FSEL_MASK;
-	phyotg |= OTG_SYS_FSEL(phyclk);
-
-	/* Enable normal mode of operation */
-	phyotg &= ~(OTG_SYS_FORCESUSPEND |
-			OTG_SYS_SIDDQ_UOTG |
-			OTG_SYS_FORCESLEEP |
-			OTG_SYS_REFCLKSEL_MASK |
-			/* COMMON Block configuration during suspend */
-			OTG_SYS_COMMON_ON);
-
-	/* OTG phy & link reset */
-	phyotg |= (OTG_SYS_PHY0_SWRST |
-			OTG_SYS_LINKSWRST_UOTG |
-			OTG_SYS_PHYLINK_SWRESET |
-			OTG_SYS_OTGDISABLE |
-			/* Set phy refclk */
-			OTG_SYS_REFCLKSEL_CLKCORE);
-
-	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-	udelay(10);
-	phyotg &= ~(OTG_SYS_PHY0_SWRST |
-			OTG_SYS_LINKSWRST_UOTG |
-			OTG_SYS_PHYLINK_SWRESET);
-	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-
-	/* HSIC phy configuration */
-	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
-			HSIC_CTRL_REFCLKSEL |
-			HSIC_CTRL_PHYSWRST);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-	udelay(10);
-	phyhsic &= ~HSIC_CTRL_PHYSWRST;
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-
-	udelay(80);
-
-	/* enable EHCI DMA burst */
-	ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
-	ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
-				HOST_EHCICTRL_ENAINCR4 |
-				HOST_EHCICTRL_ENAINCR8 |
-				HOST_EHCICTRL_ENAINCR16);
-	writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
-
-	/* set ohci_suspend_on_n */
-	ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
-	ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
-	writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
-}
-
-static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phypwr;
-	u32 phyclk;
-	u32 rstcon;
-
-	/* set clock frequency for PLL */
-	phyclk = sphy->ref_clk_freq;
-	phypwr = readl(regs + SAMSUNG_PHYPWR);
-	rstcon = readl(regs + SAMSUNG_RSTCON);
-
-	switch (sphy->drv_data->cpu_type) {
-	case TYPE_S3C64XX:
-		phyclk &= ~PHYCLK_COMMON_ON_N;
-		phypwr &= ~PHYPWR_NORMAL_MASK;
-		rstcon |= RSTCON_SWRST;
-		break;
-	case TYPE_EXYNOS4210:
-		phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
-		rstcon |= RSTCON_SWRST;
-	default:
-		break;
-	}
-
-	writel(phyclk, regs + SAMSUNG_PHYCLK);
-	/* Configure PHY0 for normal operation*/
-	writel(phypwr, regs + SAMSUNG_PHYPWR);
-	/* reset all ports of PHY and Link */
-	writel(rstcon, regs + SAMSUNG_RSTCON);
-	udelay(10);
-	rstcon &= ~RSTCON_SWRST;
-	writel(rstcon, regs + SAMSUNG_RSTCON);
-}
-
-static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phyhost;
-	u32 phyotg;
-	u32 phyhsic;
-
-	if (atomic_dec_return(&sphy->phy_usage) > 0) {
-		dev_info(sphy->dev, "still being used\n");
-		return;
-	}
-
-	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
-			HSIC_CTRL_REFCLKSEL |
-			HSIC_CTRL_SIDDQ |
-			HSIC_CTRL_FORCESLEEP |
-			HSIC_CTRL_FORCESUSPEND);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-
-	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-	phyhost |= (HOST_CTRL0_SIDDQ |
-			HOST_CTRL0_FORCESUSPEND |
-			HOST_CTRL0_FORCESLEEP |
-			HOST_CTRL0_PHYSWRST |
-			HOST_CTRL0_PHYSWRSTALL);
-	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
-	phyotg |= (OTG_SYS_FORCESUSPEND |
-			OTG_SYS_SIDDQ_UOTG |
-			OTG_SYS_FORCESLEEP);
-	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-}
-
-static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phypwr;
-
-	phypwr = readl(regs + SAMSUNG_PHYPWR);
-
-	switch (sphy->drv_data->cpu_type) {
-	case TYPE_S3C64XX:
-		phypwr |= PHYPWR_NORMAL_MASK;
-		break;
-	case TYPE_EXYNOS4210:
-		phypwr |= PHYPWR_NORMAL_MASK_PHY0;
-	default:
-		break;
-	}
-
-	/* Disable analog and otg block power */
-	writel(phypwr, regs + SAMSUNG_PHYPWR);
-}
-
-/*
- * The function passed to the usb driver for phy initialization
- */
-static int samsung_usbphy_init(struct usb_phy *phy)
-{
-	struct samsung_usbphy *sphy;
-	struct usb_bus *host = NULL;
-	unsigned long flags;
-	int ret = 0;
-
-	sphy = phy_to_sphy(phy);
-
-	host = phy->otg->host;
-
-	/* Enable the phy clock */
-	ret = clk_prepare_enable(sphy->clk);
-	if (ret) {
-		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
-		return ret;
-	}
-
-	spin_lock_irqsave(&sphy->lock, flags);
-
-	if (host) {
-		/* setting default phy-type for USB 2.0 */
-		if (!strstr(dev_name(host->controller), "ehci") ||
-				!strstr(dev_name(host->controller), "ohci"))
-			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
-	} else {
-		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-	}
-
-	/* Disable phy isolation */
-	if (sphy->plat && sphy->plat->pmu_isolation)
-		sphy->plat->pmu_isolation(false);
-	else
-		samsung_usbphy_set_isolation(sphy, false);
-
-	/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
-	samsung_usbphy_cfg_sel(sphy);
-
-	/* Initialize usb phy registers */
-	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
-		samsung_exynos5_usbphy_enable(sphy);
-	else
-		samsung_usbphy_enable(sphy);
-
-	spin_unlock_irqrestore(&sphy->lock, flags);
-
-	/* Disable the phy clock */
-	clk_disable_unprepare(sphy->clk);
-
-	return ret;
-}
-
-/*
- * The function passed to the usb driver for phy shutdown
- */
-static void samsung_usbphy_shutdown(struct usb_phy *phy)
-{
-	struct samsung_usbphy *sphy;
-	struct usb_bus *host = NULL;
-	unsigned long flags;
-
-	sphy = phy_to_sphy(phy);
-
-	host = phy->otg->host;
-
-	if (clk_prepare_enable(sphy->clk)) {
-		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
-		return;
-	}
-
-	spin_lock_irqsave(&sphy->lock, flags);
-
-	if (host) {
-		/* setting default phy-type for USB 2.0 */
-		if (!strstr(dev_name(host->controller), "ehci") ||
-				!strstr(dev_name(host->controller), "ohci"))
-			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
-	} else {
-		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-	}
-
-	/* De-initialize usb phy registers */
-	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
-		samsung_exynos5_usbphy_disable(sphy);
-	else
-		samsung_usbphy_disable(sphy);
-
-	/* Enable phy isolation */
-	if (sphy->plat && sphy->plat->pmu_isolation)
-		sphy->plat->pmu_isolation(true);
-	else
-		samsung_usbphy_set_isolation(sphy, true);
-
-	spin_unlock_irqrestore(&sphy->lock, flags);
-
-	clk_disable_unprepare(sphy->clk);
-}
-
-static const struct of_device_id samsung_usbphy_dt_match[];
-
-static inline const struct samsung_usbphy_drvdata
-*samsung_usbphy_get_driver_data(struct platform_device *pdev)
-{
-	if (pdev->dev.of_node) {
-		const struct of_device_id *match;
-		match = of_match_node(samsung_usbphy_dt_match,
-							pdev->dev.of_node);
-		return match->data;
-	}
-
-	return (struct samsung_usbphy_drvdata *)
-				platform_get_device_id(pdev)->driver_data;
-}
-
-static int samsung_usbphy_probe(struct platform_device *pdev)
-{
-	struct samsung_usbphy *sphy;
-	struct usb_otg *otg;
-	struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
-	const struct samsung_usbphy_drvdata *drv_data;
-	struct device *dev = &pdev->dev;
-	struct resource *phy_mem;
-	void __iomem	*phy_base;
-	struct clk *clk;
-	int ret;
-
-	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!phy_mem) {
-		dev_err(dev, "%s: missing mem resource\n", __func__);
-		return -ENODEV;
-	}
-
-	phy_base = devm_ioremap_resource(dev, phy_mem);
-	if (IS_ERR(phy_base))
-		return PTR_ERR(phy_base);
-
-	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
-	if (!sphy)
-		return -ENOMEM;
-
-	otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
-	if (!otg)
-		return -ENOMEM;
-
-	drv_data = samsung_usbphy_get_driver_data(pdev);
-
-	if (drv_data->cpu_type == TYPE_EXYNOS5250)
-		clk = devm_clk_get(dev, "usbhost");
-	else
-		clk = devm_clk_get(dev, "otg");
-
-	if (IS_ERR(clk)) {
-		dev_err(dev, "Failed to get otg clock\n");
-		return PTR_ERR(clk);
-	}
-
-	sphy->dev = dev;
-
-	if (dev->of_node) {
-		ret = samsung_usbphy_parse_dt(sphy);
-		if (ret < 0)
-			return ret;
-	} else {
-		if (!pdata) {
-			dev_err(dev, "no platform data specified\n");
-			return -EINVAL;
-		}
-	}
-
-	sphy->plat		= pdata;
-	sphy->regs		= phy_base;
-	sphy->clk		= clk;
-	sphy->drv_data		= drv_data;
-	sphy->phy.dev		= sphy->dev;
-	sphy->phy.label		= "samsung-usbphy";
-	sphy->phy.init		= samsung_usbphy_init;
-	sphy->phy.shutdown	= samsung_usbphy_shutdown;
-	sphy->ref_clk_freq	= samsung_usbphy_get_refclk_freq(sphy);
-
-	sphy->phy.otg		= otg;
-	sphy->phy.otg->phy	= &sphy->phy;
-	sphy->phy.otg->set_host = samsung_usbphy_set_host;
-
-	spin_lock_init(&sphy->lock);
-
-	platform_set_drvdata(pdev, sphy);
-
-	return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
-}
-
-static int samsung_usbphy_remove(struct platform_device *pdev)
-{
-	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
-
-	usb_remove_phy(&sphy->phy);
-
-	if (sphy->pmuregs)
-		iounmap(sphy->pmuregs);
-	if (sphy->sysreg)
-		iounmap(sphy->sysreg);
-
-	return 0;
-}
-
-static const struct samsung_usbphy_drvdata usbphy_s3c64xx = {
-	.cpu_type		= TYPE_S3C64XX,
-	.devphy_en_mask		= S3C64XX_USBPHY_ENABLE,
-};
-
-static const struct samsung_usbphy_drvdata usbphy_exynos4 = {
-	.cpu_type		= TYPE_EXYNOS4210,
-	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
-};
-
-static struct samsung_usbphy_drvdata usbphy_exynos5 = {
-	.cpu_type		= TYPE_EXYNOS5250,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
-	.hostphy_reg_offset	= EXYNOS_USBHOST_PHY_CTRL_OFFSET,
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id samsung_usbphy_dt_match[] = {
-	{
-		.compatible = "samsung,s3c64xx-usbphy",
-		.data = &usbphy_s3c64xx,
-	}, {
-		.compatible = "samsung,exynos4210-usbphy",
-		.data = &usbphy_exynos4,
-	}, {
-		.compatible = "samsung,exynos5250-usbphy",
-		.data = &usbphy_exynos5
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
-#endif
-
-static struct platform_device_id samsung_usbphy_driver_ids[] = {
-	{
-		.name		= "s3c64xx-usbphy",
-		.driver_data	= (unsigned long)&usbphy_s3c64xx,
-	}, {
-		.name		= "exynos4210-usbphy",
-		.driver_data	= (unsigned long)&usbphy_exynos4,
-	}, {
-		.name		= "exynos5250-usbphy",
-		.driver_data	= (unsigned long)&usbphy_exynos5,
-	},
-	{},
-};
-
-MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
-
-static struct platform_driver samsung_usbphy_driver = {
-	.probe		= samsung_usbphy_probe,
-	.remove		= samsung_usbphy_remove,
-	.id_table	= samsung_usbphy_driver_ids,
-	.driver		= {
-		.name	= "samsung-usbphy",
-		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
-	},
-};
-
-module_platform_driver(samsung_usbphy_driver);
-
-MODULE_DESCRIPTION("Samsung USB phy controller");
-MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-usbphy");
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 9538f0feafe2..45b94019aec8 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -32,7 +32,6 @@
  */
 void usbhs_pkt_init(struct usbhs_pkt *pkt)
 {
-	pkt->dma = DMA_ADDR_INVALID;
 	INIT_LIST_HEAD(&pkt->node);
 }
 
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
index c31731a843d1..a168a1760fce 100644
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -23,8 +23,6 @@
 #include <asm/dma.h>
 #include "pipe.h"
 
-#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
-
 struct usbhs_fifo {
 	char *name;
 	u32 port;	/* xFIFO */
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 78fca978b2d0..ed4949faa70d 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -230,7 +230,7 @@ static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv,
 	return 0;
 }
 
-struct usbhsg_recip_handle req_clear_feature = {
+static struct usbhsg_recip_handle req_clear_feature = {
 	.name		= "clear feature",
 	.device		= usbhsg_recip_handler_std_control_done,
 	.interface	= usbhsg_recip_handler_std_control_done,
@@ -271,7 +271,7 @@ static int usbhsg_recip_handler_std_set_endpoint(struct usbhs_priv *priv,
 	return 0;
 }
 
-struct usbhsg_recip_handle req_set_feature = {
+static struct usbhsg_recip_handle req_set_feature = {
 	.name		= "set feature",
 	.device		= usbhsg_recip_handler_std_set_device,
 	.interface	= usbhsg_recip_handler_std_control_done,
@@ -372,7 +372,7 @@ static int usbhsg_recip_handler_std_get_endpoint(struct usbhs_priv *priv,
 	return 0;
 }
 
-struct usbhsg_recip_handle req_get_status = {
+static struct usbhsg_recip_handle req_get_status = {
 	.name		= "get status",
 	.device		= usbhsg_recip_handler_std_get_device,
 	.interface	= usbhsg_recip_handler_std_get_interface,
@@ -845,7 +845,6 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget,
 
 	/* first hook up the driver ... */
 	gpriv->driver = driver;
-	gpriv->gadget.dev.driver = &driver->driver;
 
 	return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD);
 }
@@ -861,7 +860,6 @@ static int usbhsg_gadget_stop(struct usb_gadget *gadget,
 		return -EINVAL;
 
 	usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD);
-	gpriv->gadget.dev.driver = NULL;
 	gpriv->driver = NULL;
 
 	return 0;
@@ -925,11 +923,6 @@ static int usbhsg_stop(struct usbhs_priv *priv)
 	return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED);
 }
 
-static void usbhs_mod_gadget_release(struct device *pdev)
-{
-	/* do nothing */
-}
-
 int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv;
@@ -976,15 +969,10 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 	/*
 	 * init gadget
 	 */
-	dev_set_name(&gpriv->gadget.dev, "gadget");
 	gpriv->gadget.dev.parent	= dev;
-	gpriv->gadget.dev.release	= usbhs_mod_gadget_release;
 	gpriv->gadget.name		= "renesas_usbhs_udc";
 	gpriv->gadget.ops		= &usbhsg_gadget_ops;
 	gpriv->gadget.max_speed		= USB_SPEED_HIGH;
-	ret = device_register(&gpriv->gadget.dev);
-	if (ret < 0)
-		goto err_add_udc;
 
 	INIT_LIST_HEAD(&gpriv->gadget.ep_list);
 
@@ -1014,15 +1002,13 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 
 	ret = usb_add_gadget_udc(dev, &gpriv->gadget);
 	if (ret)
-		goto err_register;
+		goto err_add_udc;
 
 
 	dev_info(dev, "gadget probed\n");
 
 	return 0;
 
-err_register:
-	device_unregister(&gpriv->gadget.dev);
 err_add_udc:
 	kfree(gpriv->uep);
 
@@ -1038,8 +1024,6 @@ void usbhs_mod_gadget_remove(struct usbhs_priv *priv)
 
 	usb_del_gadget_udc(&gpriv->gadget);
 
-	device_unregister(&gpriv->gadget.dev);
-
 	kfree(gpriv->uep);
 	kfree(gpriv);
 }
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e954ab..0db0a919d72b 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,32 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/ch9.h>
+#include <linux/usb/otg.h>
+
+const char *usb_otg_state_string(enum usb_otg_state state)
+{
+	static const char *const names[] = {
+		[OTG_STATE_A_IDLE] = "a_idle",
+		[OTG_STATE_A_WAIT_VRISE] = "a_wait_vrise",
+		[OTG_STATE_A_WAIT_BCON] = "a_wait_bcon",
+		[OTG_STATE_A_HOST] = "a_host",
+		[OTG_STATE_A_SUSPEND] = "a_suspend",
+		[OTG_STATE_A_PERIPHERAL] = "a_peripheral",
+		[OTG_STATE_A_WAIT_VFALL] = "a_wait_vfall",
+		[OTG_STATE_A_VBUS_ERR] = "a_vbus_err",
+		[OTG_STATE_B_IDLE] = "b_idle",
+		[OTG_STATE_B_SRP_INIT] = "b_srp_init",
+		[OTG_STATE_B_PERIPHERAL] = "b_peripheral",
+		[OTG_STATE_B_WAIT_ACON] = "b_wait_acon",
+		[OTG_STATE_B_HOST] = "b_host",
+	};
+
+	if (state < 0 || state >= ARRAY_SIZE(names))
+		return "UNDEFINED";
+
+	return names[state];
+}
+EXPORT_SYMBOL_GPL(usb_otg_state_string);
 
 const char *usb_speed_string(enum usb_device_speed speed)
 {
@@ -32,4 +58,25 @@ const char *usb_speed_string(enum usb_device_speed speed)
 }
 EXPORT_SYMBOL_GPL(usb_speed_string);
 
+const char *usb_state_string(enum usb_device_state state)
+{
+	static const char *const names[] = {
+		[USB_STATE_NOTATTACHED] = "not attached",
+		[USB_STATE_ATTACHED] = "attached",
+		[USB_STATE_POWERED] = "powered",
+		[USB_STATE_RECONNECTING] = "reconnecting",
+		[USB_STATE_UNAUTHENTICATED] = "unauthenticated",
+		[USB_STATE_DEFAULT] = "default",
+		[USB_STATE_ADDRESS] = "addresssed",
+		[USB_STATE_CONFIGURED] = "configured",
+		[USB_STATE_SUSPENDED] = "suspended",
+	};
+
+	if (state < 0 || state >= ARRAY_SIZE(names))
+		return "UNKNOWN";
+
+	return names[state];
+}
+EXPORT_SYMBOL_GPL(usb_state_string);
+
 MODULE_LICENSE("GPL");