diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-03-26 12:46:08 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-03-26 12:46:08 -0700 |
| commit | 5627ecb8374a00163d90bc92c33f829ac27895b2 (patch) | |
| tree | 2fde352c8f5412d1ed70655c44beb8c919967257 /drivers | |
| parent | a060c9409e25d573c23fccb8e02f098aa33f812e (diff) | |
| parent | 1a22aabf20adf89cb216f566913196128766f25b (diff) | |
| download | linux-5627ecb8374a00163d90bc92c33f829ac27895b2.tar.gz | |
Merge branch 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- tracepoints when Linux acts as an I2C client
- added support for AMD PSP
- whole subsystem now uses generic_handle_irq_safe()
- piix4 driver gained MMIO access enabling so far missed controllers
with AMD chipsets
- a bulk of device driver updates, refactorization, and fixes.
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits)
i2c: mux: demux-pinctrl: do not deactivate a master that is not active
i2c: meson: Fix wrong speed use from probe
i2c: add tracepoints for I2C slave events
i2c: designware: Remove code duplication
i2c: cros-ec-tunnel: Fix syntax errors in comments
MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding
i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused
i2c: mediatek: Add i2c compatible for Mediatek MT8168
dt-bindings: i2c: update bindings for MT8168 SoC
i2c: mt65xx: Simplify with clk-bulk
i2c: i801: Drop two outdated comments
i2c: xiic: Make bus names unique
i2c: i801: Add support for the Process Call command
i2c: i801: Drop useless masking in i801_access
i2c: tegra: Add SMBus block read function
i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers
i2c: designware: Lock the adapter while setting the suspended flag
i2c: mediatek: remove redundant null check
i2c: mediatek: modify bus speed calculation formula
i2c: designware: Fix improper usage of readl
...
Diffstat (limited to 'drivers')
38 files changed, 1365 insertions, 347 deletions
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index e7934ba79b02..ad245bbd965e 100644 --- a/drivers/acpi/acpi_apd.c +++ b/drivers/acpi/acpi_apd.c @@ -232,12 +232,13 @@ static const struct acpi_device_id acpi_apd_device_ids[] = { /* Generic apd devices */ #ifdef CONFIG_X86_AMD_PLATFORM_DEVICE { "AMD0010", APD_ADDR(cz_i2c_desc) }, - { "AMDI0010", APD_ADDR(wt_i2c_desc) }, { "AMD0020", APD_ADDR(cz_uart_desc) }, - { "AMDI0020", APD_ADDR(cz_uart_desc) }, - { "AMDI0022", APD_ADDR(cz_uart_desc) }, { "AMD0030", }, { "AMD0040", APD_ADDR(fch_misc_desc)}, + { "AMDI0010", APD_ADDR(wt_i2c_desc) }, + { "AMDI0019", APD_ADDR(wt_i2c_desc) }, + { "AMDI0020", APD_ADDR(cz_uart_desc) }, + { "AMDI0022", APD_ADDR(cz_uart_desc) }, { "HYGO0010", APD_ADDR(wt_i2c_desc) }, #endif #ifdef CONFIG_ARM64 diff --git a/drivers/base/property.c b/drivers/base/property.c index e6497f6877ee..fc59e0f7f9cc 100644 --- a/drivers/base/property.c +++ b/drivers/base/property.c @@ -936,6 +936,35 @@ void __iomem *fwnode_iomap(struct fwnode_handle *fwnode, int index) EXPORT_SYMBOL(fwnode_iomap); /** + * fwnode_irq_get_byname - Get IRQ from a fwnode using its name + * @fwnode: Pointer to the firmware node + * @name: IRQ name + * + * Description: + * Find a match to the string @name in the 'interrupt-names' string array + * in _DSD for ACPI, or of_node for Device Tree. Then get the Linux IRQ + * number of the IRQ resource corresponding to the index of the matched + * string. + * + * Return: + * Linux IRQ number on success, or negative errno otherwise. + */ +int fwnode_irq_get_byname(const struct fwnode_handle *fwnode, const char *name) +{ + int index; + + if (!name) + return -EINVAL; + + index = fwnode_property_match_string(fwnode, "interrupt-names", name); + if (index < 0) + return index; + + return fwnode_irq_get(fwnode, index); +} +EXPORT_SYMBOL(fwnode_irq_get_byname); + +/** * fwnode_graph_get_next_endpoint - Get next endpoint firmware node * @fwnode: Pointer to the parent firmware node * @prev: Previous endpoint node or %NULL to get the first diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 8a6c6ee28556..a1bae59208e3 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -9,6 +9,13 @@ menu "I2C Hardware Bus support" comment "PC SMBus host controller drivers" depends on PCI +config I2C_CCGX_UCSI + tristate + help + A common module to provide an API to instantiate UCSI device + for Cypress CCGx Type-C controller. Individual bus drivers + need to select this one on demand. + config I2C_ALI1535 tristate "ALI 1535" depends on PCI @@ -148,6 +155,7 @@ config I2C_I801 Jasper Lake (SOC) Emmitsburg (PCH) Alder Lake (PCH) + Raptor Lake (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -245,6 +253,7 @@ config I2C_NFORCE2_S4985 config I2C_NVIDIA_GPU tristate "NVIDIA GPU I2C controller" depends on PCI + select I2C_CCGX_UCSI help If you say yes to this option, support will be included for the NVIDIA GPU I2C controller which is used to communicate with the GPU's @@ -477,8 +486,8 @@ config I2C_BCM_KONA config I2C_BRCMSTB tristate "BRCM Settop/DSL I2C controller" - depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC || \ - ARCH_BCM_63XX || COMPILE_TEST + depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \ + ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST default y help If you say yes to this option, support will be included for the @@ -553,6 +562,17 @@ config I2C_DESIGNWARE_PLATFORM This driver can also be built as a module. If so, the module will be called i2c-designware-platform. +config I2C_DESIGNWARE_AMDPSP + bool "AMD PSP I2C semaphore support" + depends on X86_MSR + depends on ACPI + depends on I2C_DESIGNWARE_PLATFORM + help + This driver enables managed host access to the selected I2C bus shared + between AMD CPU and AMD PSP. + + You should say Y if running on an AMD system equipped with the PSP. + config I2C_DESIGNWARE_BAYTRAIL bool "Intel Baytrail I2C semaphore support" depends on ACPI @@ -570,6 +590,7 @@ config I2C_DESIGNWARE_PCI tristate "Synopsys DesignWare PCI" depends on PCI select I2C_DESIGNWARE_CORE + select I2C_CCGX_UCSI help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 1d00dce77098..479f60e4ee3d 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -6,6 +6,9 @@ # ACPI drivers obj-$(CONFIG_I2C_SCMI) += i2c-scmi.o +# Auxiliary I2C/SMBus modules +obj-$(CONFIG_I2C_CCGX_UCSI) += i2c-ccgx-ucsi.o + # PC SMBus host controller drivers obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o @@ -54,6 +57,7 @@ i2c-designware-core-y += i2c-designware-master.o i2c-designware-core-$(CONFIG_I2C_DESIGNWARE_SLAVE) += i2c-designware-slave.o obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o i2c-designware-platform-y := i2c-designware-platdrv.o +i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_AMDPSP) += i2c-designware-amdpsp.o i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o i2c-designware-pci-y := i2c-designware-pcidrv.o diff --git a/drivers/i2c/busses/i2c-amd-mp2-pci.c b/drivers/i2c/busses/i2c-amd-mp2-pci.c index adf0e8c1ec01..f57077a7448d 100644 --- a/drivers/i2c/busses/i2c-amd-mp2-pci.c +++ b/drivers/i2c/busses/i2c-amd-mp2-pci.c @@ -308,11 +308,8 @@ static int amd_mp2_pci_init(struct amd_mp2_dev *privdata, pci_set_master(pci_dev); rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64)); - if (rc) { - rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32)); - if (rc) - goto err_dma_mask; - } + if (rc) + goto err_dma_mask; /* Set up intx irq */ writel(0, privdata->mmio + AMD_P2C_MSG_INTEN); diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 5149454eef4a..f72c6576d8a3 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -454,18 +454,20 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) ret = clk_prepare_enable(i2c_dev->bus_clk); if (ret) { dev_err(&pdev->dev, "Couldn't prepare clock"); - return ret; + goto err_put_exclusive_rate; } i2c_dev->irq = platform_get_irq(pdev, 0); - if (i2c_dev->irq < 0) - return i2c_dev->irq; + if (i2c_dev->irq < 0) { + ret = i2c_dev->irq; + goto err_disable_unprepare_clk; + } ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Could not request IRQ\n"); - return -ENODEV; + goto err_disable_unprepare_clk; } adap = &i2c_dev->adapter; @@ -489,7 +491,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) ret = i2c_add_adapter(adap); if (ret) - free_irq(i2c_dev->irq, i2c_dev); + goto err_free_irq; + + return 0; + +err_free_irq: + free_irq(i2c_dev->irq, i2c_dev); +err_disable_unprepare_clk: + clk_disable_unprepare(i2c_dev->bus_clk); +err_put_exclusive_rate: + clk_rate_exclusive_put(i2c_dev->bus_clk); return ret; } diff --git a/drivers/i2c/busses/i2c-ccgx-ucsi.c b/drivers/i2c/busses/i2c-ccgx-ucsi.c new file mode 100644 index 000000000000..092dc92dea9f --- /dev/null +++ b/drivers/i2c/busses/i2c-ccgx-ucsi.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Instantiate UCSI device for Cypress CCGx Type-C controller. + * Derived from i2c-designware-pcidrv.c and i2c-nvidia-gpu.c. + */ + +#include <linux/i2c.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/string.h> + +#include "i2c-ccgx-ucsi.h" + +struct software_node; + +struct i2c_client *i2c_new_ccgx_ucsi(struct i2c_adapter *adapter, int irq, + const struct software_node *swnode) +{ + struct i2c_board_info info = {}; + + strscpy(info.type, "ccgx-ucsi", sizeof(info.type)); + info.addr = 0x08; + info.irq = irq; + info.swnode = swnode; + + return i2c_new_client_device(adapter, &info); +} +EXPORT_SYMBOL_GPL(i2c_new_ccgx_ucsi); + +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-ccgx-ucsi.h b/drivers/i2c/busses/i2c-ccgx-ucsi.h new file mode 100644 index 000000000000..739ac7a4b117 --- /dev/null +++ b/drivers/i2c/busses/i2c-ccgx-ucsi.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __I2C_CCGX_UCSI_H_ +#define __I2C_CCGX_UCSI_H_ + +struct i2c_adapter; +struct i2c_client; +struct software_node; + +struct i2c_client *i2c_new_ccgx_ucsi(struct i2c_adapter *adapter, int irq, + const struct software_node *swnode); +#endif /* __I2C_CCGX_UCSI_H_ */ diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c index 54e909f9eab6..de15f09c9b47 100644 --- a/drivers/i2c/busses/i2c-cht-wc.c +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -100,15 +100,8 @@ static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data) * interrupt handler as well, so running the client irq handler from * this thread will cause things to lock up. */ - if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) { - /* - * generic_handle_irq expects local IRQs to be disabled - * as normally it is called from interrupt context. - */ - local_irq_disable(); - generic_handle_irq(adap->client_irq); - local_irq_enable(); - } + if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) + generic_handle_irq_safe(adap->client_irq); return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c index 790ea3fda693..892213d51f43 100644 --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -107,7 +107,7 @@ static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[], /** * ec_i2c_count_response - Count bytes needed for ec_i2c_parse_response * - * @i2c_msgs: The i2c messages to to fill up. + * @i2c_msgs: The i2c messages to fill up. * @num: The number of i2c messages expected. * * Returns the number of response bytes expeced. @@ -131,7 +131,7 @@ static int ec_i2c_count_response(struct i2c_msg i2c_msgs[], int num) * We'll take the EC's response and copy it back into msgs. * * @buf: The buffer to parse. - * @i2c_msgs: The i2c messages to to fill up. + * @i2c_msgs: The i2c messages to fill up. * @num: The number of i2c messages; will be modified to include the actual * number received. * diff --git a/drivers/i2c/busses/i2c-designware-amdpsp.c b/drivers/i2c/busses/i2c-designware-amdpsp.c new file mode 100644 index 000000000000..9b37f2b95abc --- /dev/null +++ b/drivers/i2c/busses/i2c-designware-amdpsp.c @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/i2c.h> +#include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/psp-sev.h> +#include <linux/types.h> + +#include <asm/msr.h> + +#include "i2c-designware-core.h" + +#define MSR_AMD_PSP_ADDR 0xc00110a2 +#define PSP_MBOX_OFFSET 0x10570 +#define PSP_CMD_TIMEOUT_US (500 * USEC_PER_MSEC) + +#define PSP_I2C_REQ_BUS_CMD 0x64 +#define PSP_I2C_REQ_RETRY_CNT 10 +#define PSP_I2C_REQ_RETRY_DELAY_US (50 * USEC_PER_MSEC) +#define PSP_I2C_REQ_STS_OK 0x0 +#define PSP_I2C_REQ_STS_BUS_BUSY 0x1 +#define PSP_I2C_REQ_STS_INV_PARAM 0x3 + +#define PSP_MBOX_FIELDS_STS GENMASK(15, 0) +#define PSP_MBOX_FIELDS_CMD GENMASK(23, 16) +#define PSP_MBOX_FIELDS_RESERVED GENMASK(29, 24) +#define PSP_MBOX_FIELDS_RECOVERY BIT(30) +#define PSP_MBOX_FIELDS_READY BIT(31) + +struct psp_req_buffer_hdr { + u32 total_size; + u32 status; +}; + +enum psp_i2c_req_type { + PSP_I2C_REQ_ACQUIRE, + PSP_I2C_REQ_RELEASE, + PSP_I2C_REQ_MAX +}; + +struct psp_i2c_req { + struct psp_req_buffer_hdr hdr; + enum psp_i2c_req_type type; +}; + +struct psp_mbox { + u32 cmd_fields; + u64 i2c_req_addr; +} __packed; + +static DEFINE_MUTEX(psp_i2c_access_mutex); +static unsigned long psp_i2c_sem_acquired; +static void __iomem *mbox_iomem; +static u32 psp_i2c_access_count; +static bool psp_i2c_mbox_fail; +static struct device *psp_i2c_dev; + +/* + * Implementation of PSP-x86 i2c-arbitration mailbox introduced for AMD Cezanne + * family of SoCs. + */ + +static int psp_get_mbox_addr(unsigned long *mbox_addr) +{ + unsigned long long psp_mmio; + + if (rdmsrl_safe(MSR_AMD_PSP_ADDR, &psp_mmio)) + return -EIO; + + *mbox_addr = (unsigned long)(psp_mmio + PSP_MBOX_OFFSET); + + return 0; +} + +static int psp_mbox_probe(void) +{ + unsigned long mbox_addr; + int ret; + + ret = psp_get_mbox_addr(&mbox_addr); + if (ret) + return ret; + + mbox_iomem = ioremap(mbox_addr, sizeof(struct psp_mbox)); + if (!mbox_iomem) + return -ENOMEM; + + return 0; +} + +/* Recovery field should be equal 0 to start sending commands */ +static int psp_check_mbox_recovery(struct psp_mbox __iomem *mbox) +{ + u32 tmp; + + tmp = readl(&mbox->cmd_fields); + + return FIELD_GET(PSP_MBOX_FIELDS_RECOVERY, tmp); +} + +static int psp_wait_cmd(struct psp_mbox __iomem *mbox) +{ + u32 tmp, expected; + + /* Expect mbox_cmd to be cleared and ready bit to be set by PSP */ + expected = FIELD_PREP(PSP_MBOX_FIELDS_READY, 1); + + /* + * Check for readiness of PSP mailbox in a tight loop in order to + * process further as soon as command was consumed. + */ + return readl_poll_timeout(&mbox->cmd_fields, tmp, (tmp == expected), + 0, PSP_CMD_TIMEOUT_US); +} + +/* Status equal to 0 means that PSP succeed processing command */ +static u32 psp_check_mbox_sts(struct psp_mbox __iomem *mbox) +{ + u32 cmd_reg; + + cmd_reg = readl(&mbox->cmd_fields); + + return FIELD_GET(PSP_MBOX_FIELDS_STS, cmd_reg); +} + +static int psp_send_cmd(struct psp_i2c_req *req) +{ + struct psp_mbox __iomem *mbox = mbox_iomem; + phys_addr_t req_addr; + u32 cmd_reg; + + if (psp_check_mbox_recovery(mbox)) + return -EIO; + + if (psp_wait_cmd(mbox)) + return -EBUSY; + + /* + * Fill mailbox with address of command-response buffer, which will be + * used for sending i2c requests as well as reading status returned by + * PSP. Use physical address of buffer, since PSP will map this region. + */ + req_addr = __psp_pa((void *)req); + writeq(req_addr, &mbox->i2c_req_addr); + + /* Write command register to trigger processing */ + cmd_reg = FIELD_PREP(PSP_MBOX_FIELDS_CMD, PSP_I2C_REQ_BUS_CMD); + writel(cmd_reg, &mbox->cmd_fields); + + if (psp_wait_cmd(mbox)) + return -ETIMEDOUT; + + if (psp_check_mbox_sts(mbox)) + return -EIO; + + return 0; +} + +/* Helper to verify status returned by PSP */ +static int check_i2c_req_sts(struct psp_i2c_req *req) +{ + u32 status; + + /* Status field in command-response buffer is updated by PSP */ + status = READ_ONCE(req->hdr.status); + + switch (status) { + case PSP_I2C_REQ_STS_OK: + return 0; + case PSP_I2C_REQ_STS_BUS_BUSY: + return -EBUSY; + case PSP_I2C_REQ_STS_INV_PARAM: + default: + return -EIO; + } +} + +static int psp_send_check_i2c_req(struct psp_i2c_req *req) +{ + /* + * Errors in x86-PSP i2c-arbitration protocol may occur at two levels: + * 1. mailbox communication - PSP is not operational or some IO errors + * with basic communication had happened; + * 2. i2c-requests - PSP refuses to grant i2c arbitration to x86 for too + * long. + * In order to distinguish between these two in error handling code, all + * errors on the first level (returned by psp_send_cmd) are shadowed by + * -EIO. + */ + if (psp_send_cmd(req)) + return -EIO; + + return check_i2c_req_sts(req); +} + +static int psp_send_i2c_req(enum psp_i2c_req_type i2c_req_type) +{ + struct psp_i2c_req *req; + unsigned long start; + int status, ret; + + /* Allocate command-response buffer */ + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return -ENOMEM; + + req->hdr.total_size = sizeof(*req); + req->type = i2c_req_type; + + start = jiffies; + ret = read_poll_timeout(psp_send_check_i2c_req, status, + (status != -EBUSY), + PSP_I2C_REQ_RETRY_DELAY_US, + PSP_I2C_REQ_RETRY_CNT * PSP_I2C_REQ_RETRY_DELAY_US, + 0, req); + if (ret) { + dev_err(psp_i2c_dev, "Timed out waiting for PSP to %s I2C bus\n", + (i2c_req_type == PSP_I2C_REQ_ACQUIRE) ? + "release" : "acquire"); + goto cleanup; + } + + ret = status; + if (ret) { + dev_err(psp_i2c_dev, "PSP communication error\n"); + goto cleanup; + } + + dev_dbg(psp_i2c_dev, "Request accepted by PSP after %ums\n", + jiffies_to_msecs(jiffies - start)); + +cleanup: + if (ret) { + dev_err(psp_i2c_dev, "Assume i2c bus is for exclusive host usage\n"); + psp_i2c_mbox_fail = true; + } + + kfree(req); + return ret; +} + +static int psp_acquire_i2c_bus(void) +{ + int status; + + mutex_lock(&psp_i2c_access_mutex); + + /* Return early if mailbox malfunctioned */ + if (psp_i2c_mbox_fail) + goto cleanup; + + /* + * Simply increment usage counter and return if PSP semaphore was + * already taken by kernel. + */ + if (psp_i2c_access_count) { + psp_i2c_access_count++; + goto cleanup; + } + + status = psp_send_i2c_req(PSP_I2C_REQ_ACQUIRE); + if (status) + goto cleanup; + + psp_i2c_sem_acquired = jiffies; + psp_i2c_access_count++; + + /* + * In case of errors with PSP arbitrator psp_i2c_mbox_fail variable is + * set above. As a consequence consecutive calls to acquire will bypass + * communication with PSP. At any case i2c bus is granted to the caller, + * thus always return success. + */ +cleanup: + mutex_unlock(&psp_i2c_access_mutex); + return 0; +} + +static void psp_release_i2c_bus(void) +{ + int status; + + mutex_lock(&psp_i2c_access_mutex); + + /* Return early if mailbox was malfunctional */ + if (psp_i2c_mbox_fail) + goto cleanup; + + /* + * If we are last owner of PSP semaphore, need to release aribtration + * via mailbox. + */ + psp_i2c_access_count--; + if (psp_i2c_access_count) + goto cleanup; + + /* Send a release command to PSP */ + status = psp_send_i2c_req(PSP_I2C_REQ_RELEASE); + if (status) + goto cleanup; + + dev_dbg(psp_i2c_dev, "PSP semaphore held for %ums\n", + jiffies_to_msecs(jiffies - psp_i2c_sem_acquired)); + +cleanup: + mutex_unlock(&psp_i2c_access_mutex); +} + +/* + * Locking methods are based on the default implementation from + * drivers/i2c/i2c-core-base.c, but with psp acquire and release operations + * added. With this in place we can ensure that i2c clients on the bus shared + * with psp are able to lock HW access to the bus for arbitrary number of + * operations - that is e.g. write-wait-read. + */ +static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + psp_acquire_i2c_bus(); + rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter)); +} + +static int i2c_adapter_dw_psp_trylock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + int ret; + + ret = rt_mutex_trylock(&adapter->bus_lock); + if (ret) + return ret; + + psp_acquire_i2c_bus(); + + return ret; +} + +static void i2c_adapter_dw_psp_unlock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + psp_release_i2c_bus(); + rt_mutex_unlock(&adapter->bus_lock); +} + +static const struct i2c_lock_operations i2c_dw_psp_lock_ops = { + .lock_bus = i2c_adapter_dw_psp_lock_bus, + .trylock_bus = i2c_adapter_dw_psp_trylock_bus, + .unlock_bus = i2c_adapter_dw_psp_unlock_bus, +}; + +int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev) +{ + int ret; + + if (!dev) + return -ENODEV; + + if (!(dev->flags & ARBITRATION_SEMAPHORE)) + return -ENODEV; + + /* Allow to bind only one instance of a driver */ + if (psp_i2c_dev) + return -EEXIST; + + psp_i2c_dev = dev->dev; + + ret = psp_mbox_probe(); + if (ret) + return ret; + + dev_info(psp_i2c_dev, "I2C bus managed by AMD PSP\n"); + + /* + * Install global locking callbacks for adapter as well as internal i2c + * controller locks. + */ + dev->adapter.lock_ops = &i2c_dw_psp_lock_ops; + dev->acquire_lock = psp_acquire_i2c_bus; + dev->release_lock = psp_release_i2c_bus; + + return 0; +} + +/* Unmap area used as a mailbox with PSP */ +void i2c_dw_amdpsp_remove_lock_support(struct dw_i2c_dev *dev) +{ + iounmap(mbox_iomem); +} diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c index c6a7a00e1d52..45774aa47c28 100644 --- a/drivers/i2c/busses/i2c-designware-baytrail.c +++ b/drivers/i2c/busses/i2c-designware-baytrail.c @@ -12,25 +12,25 @@ #include "i2c-designware-core.h" -int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) +int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev) { acpi_status status; unsigned long long shared_host = 0; acpi_handle handle; - if (!dev || !dev->dev) - return 0; + if (!dev) + return -ENODEV; handle = ACPI_HANDLE(dev->dev); if (!handle) - return 0; + return -ENODEV; status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host); if (ACPI_FAILURE(status)) - return 0; + return -ENODEV; if (!shared_host) - return 0; + return -ENODEV; if (!iosf_mbi_available()) return -EPROBE_DEFER; diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index bf2a4920638a..9f8574320eb2 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -578,7 +578,12 @@ int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev) * Try to detect the FIFO depth if not set by interface driver, * the depth could be from 2 to 256 from HW spec. */ + ret = i2c_dw_acquire_lock(dev); + if (ret) + return ret; + ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, ¶m); + i2c_dw_release_lock(dev); if (ret) return ret; @@ -607,6 +612,11 @@ u32 i2c_dw_func(struct i2c_adapter *adap) void i2c_dw_disable(struct dw_i2c_dev *dev) { u32 dummy; + int ret; + + ret = i2c_dw_acquire_lock(dev); + if (ret) + return; /* Disable controller */ __i2c_dw_disable(dev); @@ -614,6 +624,8 @@ void i2c_dw_disable(struct dw_i2c_dev *dev) /* Disable all interrupts */ regmap_write(dev->map, DW_IC_INTR_MASK, 0); regmap_read(dev->map, DW_IC_CLR_INTR, &dummy); + + i2c_dw_release_lock(dev); } void i2c_dw_disable_int(struct dw_i2c_dev *dev) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 4b26cba40139..70b80e710990 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -227,6 +227,8 @@ struct reset_control; * @hs_lcnt: high speed LCNT value * @acquire_lock: function to acquire a hardware lock on the bus * @release_lock: function to release a hardware lock on the bus + * @semaphore_idx: Index of table with semaphore type attached to the bus. It's + * -1 if there is no semaphore. * @shared_with_punit: true if this bus is shared with the SoCs PUNIT * @disable: function to disable the controller * @disable_int: function to disable all interrupts @@ -234,7 +236,6 @@ struct reset_control; * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE * @rinfo: I²C GPIO recovery information - * @suspended: set to true if the controller is suspended * * HCNT and LCNT parameters can be used if the platform knows more accurate * values than the one computed based only on the input clock frequency. @@ -285,6 +286,7 @@ struct dw_i2c_dev { u16 hs_lcnt; int (*acquire_lock)(void); void (*release_lock)(void); + int semaphore_idx; bool shared_with_punit; void (*disable)(struct dw_i2c_dev *dev); void (*disable_int)(struct dw_i2c_dev *dev); @@ -292,11 +294,11 @@ struct dw_i2c_dev { int (*set_sda_hold_time)(struct dw_i2c_dev *dev); int mode; struct i2c_bus_recovery_info rinfo; - bool suspended; }; #define ACCESS_INTR_MASK BIT(0) #define ACCESS_NO_IRQ_SUSPEND BIT(1) +#define ARBITRATION_SEMAPHORE BIT(2) #define MODEL_MSCC_OCELOT BIT(8) #define MODEL_BAIKAL_BT1 BIT(9) @@ -310,6 +312,11 @@ struct dw_i2c_dev { #define AMD_UCSI_INTR_REG 0x474 #define AMD_UCSI_INTR_EN 0xd +struct i2c_dw_semaphore_callbacks { + int (*probe)(struct dw_i2c_dev *dev); + void (*remove)(struct dw_i2c_dev *dev); +}; + int i2c_dw_init_regmap(struct dw_i2c_dev *dev); u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset); u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset); @@ -370,9 +377,12 @@ static inline void i2c_dw_configure(struct dw_i2c_dev *dev) } #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) -extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev); -#else -static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; } +int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev); +#endif + +#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_AMDPSP) +int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev); +void i2c_dw_amdpsp_remove_lock_support(struct dw_i2c_dev *dev); #endif int i2c_dw_validate_speed(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index 9177463c2cbb..44a94b225ed8 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -567,11 +567,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) goto done_nolock; } - if (dev_WARN_ONCE(dev->dev, dev->suspended, "Transfer while suspended\n")) { - ret = -ESHUTDOWN; - goto done_nolock; - } - reinit_completion(&dev->cmd_complete); dev->msgs = msgs; dev->msgs_num = num; @@ -905,7 +900,13 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev) irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND; } + ret = i2c_dw_acquire_lock(dev); + if (ret) + return ret; + i2c_dw_disable_int(dev); + i2c_dw_release_lock(dev); + ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags, dev_name(dev->dev), dev); if (ret) { diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index ef4250f8852b..608e61209455 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -24,6 +24,7 @@ #include <linux/slab.h> #include "i2c-designware-core.h" +#include "i2c-ccgx-ucsi.h" #define DRIVER_NAME "i2c-designware-pci" #define AMD_CLK_RATE_HZ 100000 @@ -125,26 +126,6 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) return -ENODEV; } - /* - * TODO find a better way how to deduplicate instantiation - * of USB PD slave device from nVidia GPU driver. - */ -static int navi_amd_register_client(struct dw_i2c_dev *dev) -{ - struct i2c_board_info info; - - memset(&info, 0, sizeof(struct i2c_board_info)); - strscpy(info.type, "ccgx-ucsi", I2C_NAME_SIZE); - info.addr = 0x08; - info.irq = dev->irq; - - dev->slave = i2c_new_client_device(&dev->adapter, &info); - if (IS_ERR(dev->slave)) - return PTR_ERR(dev->slave); - - return 0; -} - static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c) { struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); @@ -213,29 +194,46 @@ static struct dw_pci_controller dw_pci_controllers[] = { }, }; -static int __maybe_unused i2c_dw_pci_suspend(struct device *dev) +static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - i_dev->suspended = true; i_dev->disable(i_dev); - return 0; } +static int __maybe_unused i2c_dw_pci_suspend(struct device *dev) +{ + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); + + i2c_mark_adapter_suspended(&i_dev->adapter); + + return i2c_dw_pci_runtime_suspend(dev); +} + +static int __maybe_unused i2c_dw_pci_runtime_resume(struct device *dev) +{ + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); + + return i_dev->init(i_dev); +} + static int __maybe_unused i2c_dw_pci_resume(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); int ret; - ret = i_dev->init(i_dev); - i_dev->suspended = false; + ret = i2c_dw_pci_runtime_resume(dev); + + i2c_mark_adapter_resumed(&i_dev->adapter); return ret; } -static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend, - i2c_dw_pci_resume, NULL); +static const struct dev_pm_ops i2c_dw_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume) + SET_RUNTIME_PM_OPS(i2c_dw_pci_runtime_suspend, i2c_dw_pci_runtime_resume, NULL) +}; static int i2c_dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) @@ -325,11 +323,10 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, } if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) { - r = navi_amd_register_client(dev); - if (r) { - dev_err(dev->dev, "register client failed with %d\n", r); - return r; - } + dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, NULL); + if (IS_ERR(dev->slave)) + return dev_err_probe(dev->dev, PTR_ERR(dev->slave), + "register UCSI failed\n"); } pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 2bd81abc86f6..70ade5306e45 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -50,6 +50,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "808622C1", ACCESS_NO_IRQ_SUSPEND }, { "AMD0010", ACCESS_INTR_MASK }, { "AMDI0010", ACCESS_INTR_MASK }, + { "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE }, { "AMDI0510", 0 }, { "APMC0D0F", 0 }, { "HISI02A1", 0 }, @@ -204,6 +205,63 @@ static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = { { } /* terminate list */ }; +static const struct i2c_dw_semaphore_callbacks i2c_dw_semaphore_cb_table[] = { +#ifdef CONFIG_I2C_DESIGNWARE_BAYTRAIL + { + .probe = i2c_dw_baytrail_probe_lock_support, + }, +#endif +#ifdef CONFIG_I2C_DESIGNWARE_AMDPSP + { + .probe = i2c_dw_amdpsp_probe_lock_support, + .remove = i2c_dw_amdpsp_remove_lock_support, + }, +#endif + {} +}; + +static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) +{ + const struct i2c_dw_semaphore_callbacks *ptr; + int i = 0; + int ret; + + ptr = i2c_dw_semaphore_cb_table; + + dev->semaphore_idx = -1; + + while (ptr->probe) { + ret = ptr->probe(dev); + if (ret) { + /* + * If there is no semaphore device attached to this + * controller, we shouldn't abort general i2c_controller + * probe. + */ + if (ret != -ENODEV) + return ret; + + i++; + ptr++; + continue; + } + + dev->semaphore_idx = i; + break; + } + + return 0; +} + +static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) +{ + if (dev->semaphore_idx < 0) + return; + + if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove) + i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev); +} + static int dw_i2c_plat_probe(struct platform_device *pdev) { struct i2c_adapter *adap; @@ -334,6 +392,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev) pm_runtime_put_sync(&pdev->dev); dw_i2c_plat_pm_cleanup(dev); + i2c_dw_remove_lock_support(dev); + reset_control_assert(dev->rst); return 0; @@ -368,12 +428,10 @@ static void dw_i2c_plat_complete(struct device *dev) #endif #ifdef CONFIG_PM -static int dw_i2c_plat_suspend(struct device *dev) +static int dw_i2c_plat_runtime_suspend(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - i_dev->suspended = true; - if (i_dev->shared_with_punit) return 0; @@ -383,7 +441,16 @@ static int dw_i2c_plat_suspend(struct device *dev) return 0; } -static int dw_i2c_plat_resume(struct device *dev) +static int __maybe_unused dw_i2c_plat_suspend(struct device *dev) +{ + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); + + i2c_mark_adapter_suspended(&i_dev->adapter); + + return dw_i2c_plat_runtime_suspend(dev); +} + +static int dw_i2c_plat_runtime_resume(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); @@ -391,7 +458,16 @@ static int dw_i2c_plat_resume(struct device *dev) i2c_dw_prepare_clk(i_dev, true); i_dev->init(i_dev); - i_dev->suspended = false; + + return 0; +} + +static int __maybe_unused dw_i2c_plat_resume(struct device *dev) +{ + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); + + dw_i2c_plat_runtime_resume(dev); + i2c_mark_adapter_resumed(&i_dev->adapter); return 0; } @@ -400,7 +476,7 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = { .prepare = dw_i2c_plat_prepare, .complete = dw_i2c_plat_complete, SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume) - SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL) + SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL) }; #define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 7428cc6af5cc..ff706349bdfb 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -75,6 +75,7 @@ * Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes * Alder Lake-P (PCH) 0x51a3 32 hard yes yes yes * Alder Lake-M (PCH) 0x54a3 32 hard yes yes yes + * Raptor Lake-S (PCH) 0x7a23 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -165,7 +166,7 @@ #define I801_BYTE 0x04 #define I801_BYTE_DATA 0x08 #define I801_WORD_DATA 0x0C -#define I801_PROC_CALL 0x10 /* unimplemented */ +#define I801_PROC_CALL 0x10 #define I801_BLOCK_DATA 0x14 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ #define I801_BLOCK_PROC_CALL 0x1C @@ -228,6 +229,7 @@ #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 +#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2 @@ -362,9 +364,6 @@ static int i801_check_post(struct i801_priv *priv, int status) /* * If the SMBus is still busy, we give up - * Note: This timeout condition only happens when using polling - * transactions. For interrupt operation, NAK/timeout is indicated by - * DEV_ERR. */ if (unlikely(status < 0)) { dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); @@ -473,8 +472,6 @@ static int i801_transaction(struct i801_priv *priv, int xact) return i801_check_post(priv, result ? priv->status : -ETIMEDOUT); } - /* the current contents of SMBHSTCNT can be overwritten, since PEC, - * SMBSCMD are passed in xact */ outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); status = i801_wait_intr(priv); @@ -790,7 +787,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, { int hwpec; int block = 0; - int ret = 0, xact = 0; + int ret, xact; struct i801_priv *priv = i2c_get_adapdata(adap); mutex_lock(&priv->acpi_lock); @@ -836,6 +833,14 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, } xact = I801_WORD_DATA; break; + case I2C_SMBUS_PROC_CALL: + outb_p((addr & 0x7f) << 1, SMBHSTADD(priv)); + outb_p(command, SMBHSTCMD(priv)); + outb_p(data->word & 0xff, SMBHSTDAT0(priv)); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); + xact = I801_PROC_CALL; + read_write = I2C_SMBUS_READ; + break; case I2C_SMBUS_BLOCK_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv)); @@ -902,12 +907,13 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) goto out; - switch (xact & 0x7f) { + switch (xact) { case I801_BYTE: /* Result put in SMBHSTDAT0 */ case I801_BYTE_DATA: data->byte = inb_p(SMBHSTDAT0(priv)); break; case I801_WORD_DATA: + case I801_PROC_CALL: data->word = inb_p(SMBHSTDAT0(priv)) + (inb_p(SMBHSTDAT1(priv)) << 8); break; @@ -933,6 +939,7 @@ static u32 i801_func(struct i2c_adapter *adapter) return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | ((priv->features & FEATURE_BLOCK_PROC) ? @@ -1041,6 +1048,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_M_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, + { PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c index ef73a42577cc..07eb819072c4 100644 --- a/drivers/i2c/busses/i2c-meson.c +++ b/drivers/i2c/busses/i2c-meson.c @@ -465,18 +465,18 @@ static int meson_i2c_probe(struct platform_device *pdev) */ meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0); - ret = i2c_add_adapter(&i2c->adap); - if (ret < 0) { - clk_disable_unprepare(i2c->clk); - return ret; - } - /* Disable filtering */ meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0); meson_i2c_set_clk_div(i2c, timings.bus_freq_hz); + ret = i2c_add_adapter(&i2c->adap); + if (ret < 0) { + clk_disable_unprepare(i2c->clk); + return ret; + } + return 0; } diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 9ea427f53083..f651d3e124d6 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -67,11 +67,12 @@ #define MAX_SAMPLE_CNT_DIV 8 #define MAX_STEP_CNT_DIV 64 -#define MAX_CLOCK_DIV 256 +#define MAX_CLOCK_DIV_8BITS 256 +#define MAX_CLOCK_DIV_5BITS 32 #define MAX_HS_STEP_CNT_DIV 8 -#define I2C_STANDARD_MODE_BUFFER (1000 / 2) -#define I2C_FAST_MODE_BUFFER (300 / 2) -#define I2C_FAST_MODE_PLUS_BUFFER (20 / 2) +#define I2C_STANDARD_MODE_BUFFER (1000 / 3) +#define I2C_FAST_MODE_BUFFER (300 / 3) +#define I2C_FAST_MODE_PLUS_BUFFER (20 / 3) #define I2C_CONTROL_RS (0x1 << 1) #define I2C_CONTROL_DMA_EN (0x1 << 2) @@ -85,6 +86,27 @@ #define I2C_DRV_NAME "i2c-mt65xx" +/** + * enum i2c_mt65xx_clks - Clocks enumeration for MT65XX I2C + * + * @I2C_MT65XX_CLK_MAIN: main clock for i2c bus + * @I2C_MT65XX_CLK_DMA: DMA clock for i2c via DMA + * @I2C_MT65XX_CLK_PMIC: PMIC clock for i2c from PMIC + * @I2C_MT65XX_CLK_ARB: Arbitrator clock for i2c + * @I2C_MT65XX_CLK_MAX: Number of supported clocks + */ +enum i2c_mt65xx_clks { + I2C_MT65XX_CLK_MAIN = 0, + I2C_MT65XX_CLK_DMA, + I2C_MT65XX_CLK_PMIC, + I2C_MT65XX_CLK_ARB, + I2C_MT65XX_CLK_MAX +}; + +static const char * const i2c_mt65xx_clk_ids[I2C_MT65XX_CLK_MAX] = { + "main", "dma", "pmic", "arb" +}; + enum DMA_REGS_OFFSET { OFFSET_INT_FLAG = 0x0, OFFSET_INT_EN = 0x04, @@ -243,10 +265,7 @@ struct mtk_i2c { /* set in i2c probe */ void __iomem *base; /* i2c base addr */ void __iomem *pdmabase; /* dma base address*/ - struct clk *clk_main; /* main clock for i2c bus */ - struct clk *clk_dma; /* DMA clock for i2c via DMA */ - struct clk *clk_pmic; /* PMIC clock for i2c from PMIC */ - struct clk *clk_arb; /* Arbitrator clock for i2c */ + struct clk_bulk_data clocks[I2C_MT65XX_CLK_MAX]; /* clocks for i2c */ bool have_pmic; /* can use i2c pins from PMIC */ bool use_push_pull; /* IO config push-pull mode */ @@ -370,6 +389,19 @@ static const struct mtk_i2c_compatible mt7622_compat = { .max_dma_support = 32, }; +static const struct mtk_i2c_compatible mt8168_compat = { + .regs = mt_i2c_regs_v1, + .pmic_i2c = 0, + .dcm = 1, + .auto_restart = 1, + .aux_len_reg = 1, + .timing_adjust = 1, + .dma_sync = 1, + .ltiming_adjust = 0, + .apdma_sync = 0, + .max_dma_support = 33, +}; + static const struct mtk_i2c_compatible mt8173_compat = { .regs = mt_i2c_regs_v1, .pmic_i2c = 0, @@ -397,6 +429,19 @@ static const struct mtk_i2c_compatible mt8183_compat = { .max_dma_support = 33, }; +static const struct mtk_i2c_compatible mt8186_compat = { + .regs = mt_i2c_regs_v2, + .pmic_i2c = 0, + .dcm = 0, + .auto_restart = 1, + .aux_len_reg = 1, + .timing_adjust = 1, + .dma_sync = 0, + .ltiming_adjust = 1, + .apdma_sync = 0, + .max_dma_support = 36, +}; + static const struct mtk_i2c_compatible mt8192_compat = { .quirks = &mt8183_i2c_quirks, .regs = mt_i2c_regs_v2, @@ -416,8 +461,10 @@ static const struct of_device_id mtk_i2c_of_match[] = { { .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat }, { .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat }, { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat }, + { .compatible = "mediatek,mt8168-i2c", .data = &mt8168_compat }, { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat }, { .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat }, + { .compatible = "mediatek,mt8186-i2c", .data = &mt8186_compat }, { .compatible = "mediatek,mt8192-i2c", .data = &mt8192_compat }, {} }; @@ -434,55 +481,6 @@ static void mtk_i2c_writew(struct mtk_i2c *i2c, u16 val, writew(val, i2c->base + i2c->dev_comp->regs[reg]); } -static int mtk_i2c_clock_enable(struct mtk_i2c *i2c) -{ - int ret; - - ret = clk_prepare_enable(i2c->clk_dma); - if (ret) - return ret; - - ret = clk_prepare_enable(i2c->clk_main); - if (ret) - goto err_main; - - if (i2c->have_pmic) { - ret = clk_prepare_enable(i2c->clk_pmic); - if (ret) - goto err_pmic; - } - - if (i2c->clk_arb) { - ret = clk_prepare_enable(i2c->clk_arb); - if (ret) - goto err_arb; - } - - return 0; - -err_arb: - if (i2c->have_pmic) - clk_disable_unprepare(i2c->clk_pmic); -err_pmic: - clk_disable_unprepare(i2c->clk_main); -err_main: - clk_disable_unprepare(i2c->clk_dma); - - return ret; -} - -static void mtk_i2c_clock_disable(struct mtk_i2c *i2c) -{ - if (i2c->clk_arb) - clk_disable_unprepare(i2c->clk_arb); - - if (i2c->have_pmic) - clk_disable_unprepare(i2c->clk_pmic); - - clk_disable_unprepare(i2c->clk_main); - clk_disable_unprepare(i2c->clk_dma); -} - static void mtk_i2c_init_hw(struct mtk_i2c *i2c) { u16 control_reg; @@ -590,6 +588,31 @@ static int mtk_i2c_max_step_cnt(unsigned int target_speed) return MAX_STEP_CNT_DIV; } +static int mtk_i2c_get_clk_div_restri(struct mtk_i2c *i2c, + unsigned int sample_cnt) +{ + int clk_div_restri = 0; + + if (i2c->dev_comp->ltiming_adjust == 0) + return 0; + + if (sample_cnt == 1) { + if (i2c->ac_timing.inter_clk_div == 0) + clk_div_restri = 0; + else + clk_div_restri = 1; + } else { + if (i2c->ac_timing.inter_clk_div == 0) + clk_div_restri = -1; + else if (i2c->ac_timing.inter_clk_div == 1) + clk_div_restri = 0; + else + clk_div_restri = 1; + } + + return clk_div_restri; +} + /* * Check and Calculate i2c ac-timing * @@ -718,6 +741,7 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src, unsigned int best_mul; unsigned int cnt_mul; int ret = -EINVAL; + int clk_div_restri = 0; if (target_speed > I2C_MAX_HIGH_SPEED_MODE_FREQ) target_speed = I2C_MAX_HIGH_SPEED_MODE_FREQ; @@ -735,7 +759,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src, * optimizing for sample_cnt * step_cnt being minimal */ for (sample_cnt = 1; sample_cnt <= MAX_SAMPLE_CNT_DIV; sample_cnt++) { - step_cnt = DIV_ROUND_UP(opt_div, sample_cnt); + clk_div_restri = mtk_i2c_get_clk_div_restri(i2c, sample_cnt); + step_cnt = DIV_ROUND_UP(opt_div + clk_div_restri, sample_cnt); cnt_mul = step_cnt * sample_cnt; if (step_cnt > max_step_cnt) continue; @@ -749,7 +774,7 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src, best_mul = cnt_mul; base_sample_cnt = sample_cnt; base_step_cnt = step_cnt; - if (best_mul == opt_div) + if (best_mul == (opt_div + clk_div_restri)) break; } } @@ -760,7 +785,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src, sample_cnt = base_sample_cnt; step_cnt = base_step_cnt; - if ((clk_src / (2 * sample_cnt * step_cnt)) > target_speed) { + if ((clk_src / (2 * (sample_cnt * step_cnt - clk_div_restri))) > + target_speed) { /* In this case, hardware can't support such * low i2c_bus_freq */ @@ -789,13 +815,16 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk) target_speed = i2c->speed_hz; parent_clk /= i2c->clk_src_div; - if (i2c->dev_comp->timing_adjust) - max_clk_div = MAX_CLOCK_DIV; + if (i2c->dev_comp->timing_adjust && i2c->dev_comp->ltiming_adjust) + max_clk_div = MAX_CLOCK_DIV_5BITS; + else if (i2c->dev_comp->timing_adjust) + max_clk_div = MAX_CLOCK_DIV_8BITS; else max_clk_div = 1; for (clk_div = 1; clk_div <= max_clk_div; clk_div++) { clk_src = parent_clk / clk_div; + i2c->ac_timing.inter_clk_div = clk_div - 1; if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) { /* Set master code speed register */ @@ -842,7 +871,6 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk) break; } - i2c->ac_timing.inter_clk_div = clk_div - 1; return 0; } @@ -1149,7 +1177,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap, int left_num = num; struct mtk_i2c *i2c = i2c_get_adapdata(adap); - ret = mtk_i2c_clock_enable(i2c); + ret = clk_bulk_prepare_enable(I2C_MT65XX_CLK_MAX, i2c->clocks); if (ret) return ret; @@ -1203,7 +1231,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap, ret = num; err_exit: - mtk_i2c_clock_disable(i2c); + clk_bulk_disable_unprepare(I2C_MT65XX_CLK_MAX, i2c->clocks); return ret; } @@ -1281,9 +1309,8 @@ static int mtk_i2c_probe(struct platform_device *pdev) { int ret = 0; struct mtk_i2c *i2c; - struct clk *clk; struct resource *res; - int irq; + int i, irq, speed_clk; i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); if (!i2c) @@ -1329,35 +1356,42 @@ static int mtk_i2c_probe(struct platform_device *pdev) if (i2c->have_pmic && !i2c->dev_comp->pmic_i2c) return -EINVAL; - i2c->clk_main = devm_clk_get(&pdev->dev, "main"); - if (IS_ERR(i2c->clk_main)) { + /* Fill in clk-bulk IDs */ + for (i = 0; i < I2C_MT65XX_CLK_MAX; i++) + i2c->clocks[i].id = i2c_mt65xx_clk_ids[i]; + + /* Get clocks one by one, some may be optional */ + i2c->clocks[I2C_MT65XX_CLK_MAIN].clk = devm_clk_get(&pdev->dev, "main"); + if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_MAIN].clk)) { dev_err(&pdev->dev, "cannot get main clock\n"); - return PTR_ERR(i2c->clk_main); + return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_MAIN].clk); } - i2c->clk_dma = devm_clk_get(&pdev->dev, "dma"); - if (IS_ERR(i2c->clk_dma)) { + i2c->clocks[I2C_MT65XX_CLK_DMA].clk = devm_clk_get(&pdev->dev, "dma"); + if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_DMA].clk)) { dev_err(&pdev->dev, "cannot get dma clock\n"); - return PTR_ERR(i2c->clk_dma); + return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_DMA].clk); } - i2c->clk_arb = devm_clk_get(&pdev->dev, "arb"); - if (IS_ERR(i2c->clk_arb)) - i2c->clk_arb = NULL; + i2c->clocks[I2C_MT65XX_CLK_ARB].clk = devm_clk_get_optional(&pdev->dev, "arb"); + if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk)) + return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk); - clk = i2c->clk_main; if (i2c->have_pmic) { - i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic"); - if (IS_ERR(i2c->clk_pmic)) { + i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get(&pdev->dev, "pmic"); + if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) { dev_err(&pdev->dev, "cannot get pmic clock\n"); - return PTR_ERR(i2c->clk_pmic); + return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk); } - clk = i2c->clk_pmic; + speed_clk = I2C_MT65XX_CLK_PMIC; + } else { + i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = NULL; + speed_clk = I2C_MT65XX_CLK_MAIN; } strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name)); - ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk)); + ret = mtk_i2c_set_speed(i2c, clk_get_rate(i2c->clocks[speed_clk].clk)); if (ret) { dev_err(&pdev->dev, "Failed to set the speed.\n"); return -EINVAL; @@ -1372,13 +1406,13 @@ static int mtk_i2c_probe(struct platform_device *pdev) } } - ret = mtk_i2c_clock_enable(i2c); + ret = clk_bulk_prepare_enable(I2C_MT65XX_CLK_MAX, i2c->clocks); if (ret) { dev_err(&pdev->dev, "clock enable failed!\n"); return ret; } mtk_i2c_init_hw(i2c); - mtk_i2c_clock_disable(i2c); + clk_bulk_disable_unprepare(I2C_MT65XX_CLK_MAX, i2c->clocks); ret = devm_request_irq(&pdev->dev, irq, mtk_i2c_irq, IRQF_NO_SUSPEND | IRQF_TRIGGER_NONE, @@ -1423,7 +1457,7 @@ static int mtk_i2c_resume_noirq(struct device *dev) int ret; struct mtk_i2c *i2c = dev_get_drvdata(dev); - ret = mtk_i2c_clock_enable(i2c); + ret = clk_bulk_prepare_enable(I2C_MT65XX_CLK_MAX, i2c->clocks); if (ret) { dev_err(dev, "clock enable failed!\n"); return ret; @@ -1431,7 +1465,7 @@ static int mtk_i2c_resume_noirq(struct device *dev) mtk_i2c_init_hw(i2c); - mtk_i2c_clock_disable(i2c); + clk_bulk_disable_unprepare(I2C_MT65XX_CLK_MAX, i2c->clocks); i2c_mark_adapter_resumed(&i2c->adap); diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c index 2ad166355ec9..71aad029425d 100644 --- a/drivers/i2c/busses/i2c-npcm7xx.c +++ b/drivers/i2c/busses/i2c-npcm7xx.c @@ -781,7 +781,7 @@ static void npcm_i2c_set_fifo(struct npcm_i2c *bus, int nread, int nwrite) /* * if we are about to read the first byte in blk rd mode, * don't NACK it. If slave returns zero size HW can't NACK - * it immidiattly, it will read extra byte and then NACK. + * it immediately, it will read extra byte and then NACK. */ if (bus->rd_ind == 0 && bus->read_block_use) { /* set fifo to read one byte, no last: */ @@ -981,7 +981,7 @@ static void npcm_i2c_slave_xmit(struct npcm_i2c *bus, u16 nwrite, /* * npcm_i2c_slave_wr_buf_sync: * currently slave IF only supports single byte operations. - * in order to utilyze the npcm HW FIFO, the driver will ask for 16 bytes + * in order to utilize the npcm HW FIFO, the driver will ask for 16 bytes * at a time, pack them in buffer, and then transmit them all together * to the FIFO and onward to the bus. * NACK on read will be once reached to bus->adap->quirks->max_read_len. @@ -1175,7 +1175,7 @@ static irqreturn_t npcm_i2c_int_slave_handler(struct npcm_i2c *bus) /* * the i2c module can response to 10 own SA. * check which one was addressed by the master. - * repond to the first one. + * respond to the first one. */ addr = ((i2ccst3 & 0x07) << 7) | (i2ccst2 & 0x7F); @@ -1753,8 +1753,8 @@ static void npcm_i2c_recovery_init(struct i2c_adapter *_adap) /* * npcm i2c HW allows direct reading of SCL and SDA. * However, it does not support setting SCL and SDA directly. - * The recovery function can togle SCL when SDA is low (but not set) - * Getter functions used internally, and can be used externaly. + * The recovery function can toggle SCL when SDA is low (but not set) + * Getter functions used internally, and can be used externally. */ rinfo->get_scl = npcm_i2c_get_SCL; rinfo->get_sda = npcm_i2c_get_SDA; @@ -1768,10 +1768,10 @@ static void npcm_i2c_recovery_init(struct i2c_adapter *_adap) /* * npcm_i2c_init_clk: init HW timing parameters. - * NPCM7XX i2c module timing parameters are depenent on module core clk (APB) + * NPCM7XX i2c module timing parameters are dependent on module core clk (APB) * and bus frequency. - * 100kHz bus requires tSCL = 4 * SCLFRQ * tCLK. LT and HT are simetric. - * 400kHz bus requires assymetric HT and LT. A different equation is recomended + * 100kHz bus requires tSCL = 4 * SCLFRQ * tCLK. LT and HT are symmetric. + * 400kHz bus requires asymmetric HT and LT. A different equation is recommended * by the HW designer, given core clock range (equations in comments below). * */ diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c index b5055a3cbd93..6920c1b9a126 100644 --- a/drivers/i2c/busses/i2c-nvidia-gpu.c +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -17,6 +17,8 @@ #include <asm/unaligned.h> +#include "i2c-ccgx-ucsi.h" + /* I2C definitions */ #define I2C_MST_CNTL 0x00 #define I2C_MST_CNTL_GEN_START BIT(0) @@ -266,54 +268,32 @@ static const struct software_node ccgx_node = { .properties = ccgx_props, }; -static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq) -{ - i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev, - sizeof(*i2cd->gpu_ccgx_ucsi), - GFP_KERNEL); - if (!i2cd->gpu_ccgx_ucsi) - return -ENOMEM; - - strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi", - sizeof(i2cd->gpu_ccgx_ucsi->type)); - i2cd->gpu_ccgx_ucsi->addr = 0x8; - i2cd->gpu_ccgx_ucsi->irq = irq; - i2cd->gpu_ccgx_ucsi->swnode = &ccgx_node; - i2cd->ccgx_client = i2c_new_client_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi); - return PTR_ERR_OR_ZERO(i2cd->ccgx_client); -} - static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id) { + struct device *dev = &pdev->dev; struct gpu_i2c_dev *i2cd; int status; - i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL); + i2cd = devm_kzalloc(dev, sizeof(*i2cd), GFP_KERNEL); if (!i2cd) return -ENOMEM; - i2cd->dev = &pdev->dev; - dev_set_drvdata(&pdev->dev, i2cd); + i2cd->dev = dev; + dev_set_drvdata(dev, i2cd); status = pcim_enable_device(pdev); - if (status < 0) { - dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status); - return status; - } + if (status < 0) + return dev_err_probe(dev, status, "pcim_enable_device failed\n"); pci_set_master(pdev); i2cd->regs = pcim_iomap(pdev, 0, 0); - if (!i2cd->regs) { - dev_err(&pdev->dev, "pcim_iomap failed\n"); - return -ENOMEM; - } + if (!i2cd->regs) + return dev_err_probe(dev, -ENOMEM, "pcim_iomap failed\n"); status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); - if (status < 0) { - dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status); - return status; - } + if (status < 0) + return dev_err_probe(dev, status, "pci_alloc_irq_vectors err\n"); gpu_enable_i2c_bus(i2cd); @@ -323,21 +303,21 @@ static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id) sizeof(i2cd->adapter.name)); i2cd->adapter.algo = &gpu_i2c_algorithm; i2cd->adapter.quirks = &gpu_i2c_quirks; - i2cd->adapter.dev.parent = &pdev->dev; + i2cd->adapter.dev.parent = dev; status = i2c_add_adapter(&i2cd->adapter); if (status < 0) goto free_irq_vectors; - status = gpu_populate_client(i2cd, pdev->irq); - if (status < 0) { - dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status); + i2cd->ccgx_client = i2c_new_ccgx_ucsi(&i2cd->adapter, pdev->irq, &ccgx_node); + if (IS_ERR(i2cd->ccgx_client)) { + status = dev_err_probe(dev, PTR_ERR(i2cd->ccgx_client), "register UCSI failed\n"); goto del_adapter; } - pm_runtime_set_autosuspend_delay(&pdev->dev, 3000); - pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_put_autosuspend(&pdev->dev); - pm_runtime_allow(&pdev->dev); + pm_runtime_set_autosuspend_delay(dev, 3000); + pm_runtime_use_autosuspend(dev); + pm_runtime_put_autosuspend(dev); + pm_runtime_allow(dev); return 0; @@ -350,7 +330,7 @@ free_irq_vectors: static void gpu_i2c_remove(struct pci_dev *pdev) { - struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev); + struct gpu_i2c_dev *i2cd = pci_get_drvdata(pdev); pm_runtime_get_noresume(i2cd->dev); i2c_del_adapter(&i2cd->adapter); diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c index 4e161a4089d8..7728c8460dc0 100644 --- a/drivers/i2c/busses/i2c-pasemi-core.c +++ b/drivers/i2c/busses/i2c-pasemi-core.c @@ -333,7 +333,6 @@ int pasemi_i2c_common_probe(struct pasemi_smbus *smbus) smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "PA Semi SMBus adapter (%s)", dev_name(smbus->dev)); - smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-pasemi-pci.c b/drivers/i2c/busses/i2c-pasemi-pci.c index 1ab1f28744fb..cfc89e04eb94 100644 --- a/drivers/i2c/busses/i2c-pasemi-pci.c +++ b/drivers/i2c/busses/i2c-pasemi-pci.c @@ -56,6 +56,7 @@ static int pasemi_smb_pci_probe(struct pci_dev *dev, if (!smbus->ioaddr) return -EBUSY; + smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; error = pasemi_i2c_common_probe(smbus); if (error) return error; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 8c1b31ed0c42..ac8e7d60672a 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -77,6 +77,7 @@ /* SB800 constants */ #define SB800_PIIX4_SMB_IDX 0xcd6 +#define SB800_PIIX4_SMB_MAP_SIZE 2 #define KERNCZ_IMC_IDX 0x3e #define KERNCZ_IMC_DATA 0x3f @@ -97,6 +98,9 @@ #define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18 #define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3 +#define SB800_PIIX4_FCH_PM_ADDR 0xFED80300 +#define SB800_PIIX4_FCH_PM_SIZE 8 + /* insmod parameters */ /* If force is set to anything different from 0, we forcibly enable the @@ -155,6 +159,12 @@ static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = { }; static const char *piix4_aux_port_name_sb800 = " port 1"; +struct sb800_mmio_cfg { + void __iomem *addr; + struct resource *res; + bool use_mmio; +}; + struct i2c_piix4_adapdata { unsigned short smba; @@ -162,8 +172,75 @@ struct i2c_piix4_adapdata { bool sb800_main; bool notify_imc; u8 port; /* Port number, shifted */ + struct sb800_mmio_cfg mmio_cfg; }; +static int piix4_sb800_region_request(struct device *dev, + struct sb800_mmio_cfg *mmio_cfg) +{ + if (mmio_cfg->use_mmio) { + struct resource *res; + void __iomem *addr; + + res = request_mem_region_muxed(SB800_PIIX4_FCH_PM_ADDR, + SB800_PIIX4_FCH_PM_SIZE, + "sb800_piix4_smb"); + if (!res) { + dev_err(dev, + "SMBus base address memory region 0x%x already in use.\n", + SB800_PIIX4_FCH_PM_ADDR); + return -EBUSY; + } + + addr = ioremap(SB800_PIIX4_FCH_PM_ADDR, + SB800_PIIX4_FCH_PM_SIZE); + if (!addr) { + release_resource(res); + dev_err(dev, "SMBus base address mapping failed.\n"); + return -ENOMEM; + } + + mmio_cfg->res = res; + mmio_cfg->addr = addr; + + return 0; + } + + if (!request_muxed_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE, + "sb800_piix4_smb")) { + dev_err(dev, + "SMBus base address index region 0x%x already in use.\n", + SB800_PIIX4_SMB_IDX); + return -EBUSY; + } + + return 0; +} + +static void piix4_sb800_region_release(struct device *dev, + struct sb800_mmio_cfg *mmio_cfg) +{ + if (mmio_cfg->use_mmio) { + iounmap(mmio_cfg->addr); + release_resource(mmio_cfg->res); + return; + } + + release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE); +} + +static bool piix4_sb800_use_mmio(struct pci_dev *PIIX4_dev) +{ + /* + * cd6h/cd7h port I/O accesses can be disabled on AMD processors + * w/ SMBus PCI revision ID 0x51 or greater. MMIO is supported on + * the same processors and is the recommended access method. + */ + return (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && + PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS && + PIIX4_dev->revision >= 0x51); +} + static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id) { @@ -263,12 +340,61 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, return piix4_smba; } +static int piix4_setup_sb800_smba(struct pci_dev *PIIX4_dev, + u8 smb_en, + u8 aux, + u8 *smb_en_status, + unsigned short *piix4_smba) +{ + struct sb800_mmio_cfg mmio_cfg; + u8 smba_en_lo; + u8 smba_en_hi; + int retval; + + mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev); + retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg); + if (retval) + return retval; + + if (mmio_cfg.use_mmio) { + smba_en_lo = ioread8(mmio_cfg.addr); + smba_en_hi = ioread8(mmio_cfg.addr + 1); + } else { + outb_p(smb_en, SB800_PIIX4_SMB_IDX); + smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); + outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX); + smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1); + } + + piix4_sb800_region_release(&PIIX4_dev->dev, &mmio_cfg); + + if (!smb_en) { + *smb_en_status = smba_en_lo & 0x10; + *piix4_smba = smba_en_hi << 8; + if (aux) + *piix4_smba |= 0x20; + } else { + *smb_en_status = smba_en_lo & 0x01; + *piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; + } + + if (!*smb_en_status) { + dev_err(&PIIX4_dev->dev, + "SMBus Host Controller not enabled!\n"); + return -ENODEV; + } + + return 0; +} + static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, const struct pci_device_id *id, u8 aux) { unsigned short piix4_smba; - u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel; + u8 smb_en, smb_en_status, port_sel; u8 i2ccfg, i2ccfg_offset = 0x10; + struct sb800_mmio_cfg mmio_cfg; + int retval; /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { @@ -290,35 +416,11 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, else smb_en = (aux) ? 0x28 : 0x2c; - if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, "sb800_piix4_smb")) { - dev_err(&PIIX4_dev->dev, - "SMB base address index region 0x%x already in use.\n", - SB800_PIIX4_SMB_IDX); - return -EBUSY; - } - - outb_p(smb_en, SB800_PIIX4_SMB_IDX); - smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); - outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX); - smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1); + retval = piix4_setup_sb800_smba(PIIX4_dev, smb_en, aux, &smb_en_status, + &piix4_smba); - release_region(SB800_PIIX4_SMB_IDX, 2); - - if (!smb_en) { - smb_en_status = smba_en_lo & 0x10; - piix4_smba = smba_en_hi << 8; - if (aux) - piix4_smba |= 0x20; - } else { - smb_en_status = smba_en_lo & 0x01; - piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; - } - - if (!smb_en_status) { - dev_err(&PIIX4_dev->dev, - "SMBus Host Controller not enabled!\n"); - return -ENODEV; - } + if (retval) + return retval; if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) return -ENODEV; @@ -371,10 +473,11 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; } } else { - if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, - "sb800_piix4_smb")) { + mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev); + retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg); + if (retval) { release_region(piix4_smba, SMBIOSIZE); - return -EBUSY; + return retval; } outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX); @@ -384,7 +487,7 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, SB800_PIIX4_PORT_IDX; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; - release_region(SB800_PIIX4_SMB_IDX, 2); + piix4_sb800_region_release(&PIIX4_dev->dev, &mmio_cfg); } dev_info(&PIIX4_dev->dev, @@ -662,6 +765,29 @@ static void piix4_imc_wakeup(void) release_region(KERNCZ_IMC_IDX, 2); } +static int piix4_sb800_port_sel(u8 port, struct sb800_mmio_cfg *mmio_cfg) +{ + u8 smba_en_lo, val; + + if (mmio_cfg->use_mmio) { + smba_en_lo = ioread8(mmio_cfg->addr + piix4_port_sel_sb800); + val = (smba_en_lo & ~piix4_port_mask_sb800) | port; + if (smba_en_lo != val) + iowrite8(val, mmio_cfg->addr + piix4_port_sel_sb800); + + return (smba_en_lo & piix4_port_mask_sb800); + } + + outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX); + smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); + + val = (smba_en_lo & ~piix4_port_mask_sb800) | port; + if (smba_en_lo != val) + outb_p(val, SB800_PIIX4_SMB_IDX + 1); + + return (smba_en_lo & piix4_port_mask_sb800); +} + /* * Handles access to multiple SMBus ports on the SB800. * The port is selected by bits 2:1 of the smb_en register (0x2c). @@ -678,12 +804,12 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, unsigned short piix4_smba = adapdata->smba; int retries = MAX_TIMEOUT; int smbslvcnt; - u8 smba_en_lo; - u8 port; + u8 prev_port; int retval; - if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, "sb800_piix4_smb")) - return -EBUSY; + retval = piix4_sb800_region_request(&adap->dev, &adapdata->mmio_cfg); + if (retval) + return retval; /* Request the SMBUS semaphore, avoid conflicts with the IMC */ smbslvcnt = inb_p(SMBSLVCNT); @@ -738,18 +864,12 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, } } - outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX); - smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); - - port = adapdata->port; - if ((smba_en_lo & piix4_port_mask_sb800) != port) - outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port, - SB800_PIIX4_SMB_IDX + 1); + prev_port = piix4_sb800_port_sel(adapdata->port, &adapdata->mmio_cfg); retval = piix4_access(adap, addr, flags, read_write, command, size, data); - outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1); + piix4_sb800_port_sel(prev_port, &adapdata->mmio_cfg); /* Release the semaphore */ outb_p(smbslvcnt | 0x20, SMBSLVCNT); @@ -758,7 +878,7 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, piix4_imc_wakeup(); release: - release_region(SB800_PIIX4_SMB_IDX, 2); + piix4_sb800_region_release(&adap->dev, &adapdata->mmio_cfg); return retval; } @@ -836,6 +956,7 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, return -ENOMEM; } + adapdata->mmio_cfg.use_mmio = piix4_sb800_use_mmio(dev); adapdata->smba = smba; adapdata->sb800_main = sb800_main; adapdata->port = port << piix4_port_shift_sb800; diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c index cf54f1cb4c57..5c7cc862f08f 100644 --- a/drivers/i2c/busses/i2c-qcom-cci.c +++ b/drivers/i2c/busses/i2c-qcom-cci.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2012-2016, The Linux Foundation. All rights reserved. -// Copyright (c) 2017-20 Linaro Limited. +// Copyright (c) 2017-2022 Linaro Limited. #include <linux/clk.h> #include <linux/completion.h> @@ -776,6 +776,7 @@ static const struct of_device_id cci_dt_match[] = { { .compatible = "qcom,msm8996-cci", .data = &cci_v2_data}, { .compatible = "qcom,sdm845-cci", .data = &cci_v2_data}, { .compatible = "qcom,sm8250-cci", .data = &cci_v2_data}, + { .compatible = "qcom,sm8450-cci", .data = &cci_v2_data}, {} }; MODULE_DEVICE_TABLE(of, cci_dt_match); diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 6d635a7c104c..fc1dcc19f2a1 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -3,7 +3,9 @@ #include <linux/acpi.h> #include <linux/clk.h> +#include <linux/dmaengine.h> #include <linux/dma-mapping.h> +#include <linux/dma/qcom-gpi-dma.h> #include <linux/err.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -48,6 +50,9 @@ #define LOW_COUNTER_SHFT 10 #define CYCLE_COUNTER_MSK GENMASK(9, 0) +#define I2C_PACK_TX BIT(0) +#define I2C_PACK_RX BIT(1) + enum geni_i2c_err_code { GP_IRQ0, NACK, @@ -89,6 +94,9 @@ struct geni_i2c_dev { void *dma_buf; size_t xfer_len; dma_addr_t dma_addr; + struct dma_chan *tx_c; + struct dma_chan *rx_c; + bool gpi_mode; }; struct geni_i2c_err_log { @@ -456,12 +464,207 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, return gi2c->err; } +static void i2c_gpi_cb_result(void *cb, const struct dmaengine_result *result) +{ + struct geni_i2c_dev *gi2c = cb; + + if (result->result != DMA_TRANS_NOERROR) { + dev_err(gi2c->se.dev, "DMA txn failed:%d\n", result->result); + gi2c->err = -EIO; + } else if (result->residue) { + dev_dbg(gi2c->se.dev, "DMA xfer has pending: %d\n", result->residue); + } + + complete(&gi2c->done); +} + +static void geni_i2c_gpi_unmap(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, + void *tx_buf, dma_addr_t tx_addr, + void *rx_buf, dma_addr_t rx_addr) +{ + if (tx_buf) { + dma_unmap_single(gi2c->se.dev->parent, tx_addr, msg->len, DMA_TO_DEVICE); + i2c_put_dma_safe_msg_buf(tx_buf, msg, false); + } + + if (rx_buf) { + dma_unmap_single(gi2c->se.dev->parent, rx_addr, msg->len, DMA_FROM_DEVICE); + i2c_put_dma_safe_msg_buf(rx_buf, msg, false); + } +} + +static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, + struct dma_slave_config *config, dma_addr_t *dma_addr_p, + void **buf, unsigned int op, struct dma_chan *dma_chan) +{ + struct gpi_i2c_config *peripheral; + unsigned int flags; + void *dma_buf; + dma_addr_t addr; + enum dma_data_direction map_dirn; + enum dma_transfer_direction dma_dirn; + struct dma_async_tx_descriptor *desc; + int ret; + + peripheral = config->peripheral_config; + + dma_buf = i2c_get_dma_safe_msg_buf(msg, 1); + if (!dma_buf) + return -ENOMEM; + + if (op == I2C_WRITE) + map_dirn = DMA_TO_DEVICE; + else + map_dirn = DMA_FROM_DEVICE; + + addr = dma_map_single(gi2c->se.dev->parent, dma_buf, msg->len, map_dirn); + if (dma_mapping_error(gi2c->se.dev->parent, addr)) { + i2c_put_dma_safe_msg_buf(dma_buf, msg, false); + return -ENOMEM; + } + + /* set the length as message for rx txn */ + peripheral->rx_len = msg->len; + peripheral->op = op; + + ret = dmaengine_slave_config(dma_chan, config); + if (ret) { + dev_err(gi2c->se.dev, "dma config error: %d for op:%d\n", ret, op); + goto err_config; + } + + peripheral->set_config = 0; + peripheral->multi_msg = true; + flags = DMA_PREP_INTERRUPT | DMA_CTRL_ACK; + + if (op == I2C_WRITE) + dma_dirn = DMA_MEM_TO_DEV; + else + dma_dirn = DMA_DEV_TO_MEM; + + desc = dmaengine_prep_slave_single(dma_chan, addr, msg->len, dma_dirn, flags); + if (!desc) { + dev_err(gi2c->se.dev, "prep_slave_sg failed\n"); + ret = -EIO; + goto err_config; + } + + desc->callback_result = i2c_gpi_cb_result; + desc->callback_param = gi2c; + + dmaengine_submit(desc); + *dma_addr_p = addr; + + return 0; + +err_config: + dma_unmap_single(gi2c->se.dev->parent, addr, msg->len, map_dirn); + i2c_put_dma_safe_msg_buf(dma_buf, msg, false); + return ret; +} + +static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], int num) +{ + struct dma_slave_config config = {}; + struct gpi_i2c_config peripheral = {}; + int i, ret = 0, timeout; + dma_addr_t tx_addr, rx_addr; + void *tx_buf = NULL, *rx_buf = NULL; + const struct geni_i2c_clk_fld *itr = gi2c->clk_fld; + + config.peripheral_config = &peripheral; + config.peripheral_size = sizeof(peripheral); + + peripheral.pack_enable = I2C_PACK_TX | I2C_PACK_RX; + peripheral.cycle_count = itr->t_cycle_cnt; + peripheral.high_count = itr->t_high_cnt; + peripheral.low_count = itr->t_low_cnt; + peripheral.clk_div = itr->clk_div; + peripheral.set_config = 1; + peripheral.multi_msg = false; + + for (i = 0; i < num; i++) { + gi2c->cur = &msgs[i]; + gi2c->err = 0; + dev_dbg(gi2c->se.dev, "msg[%d].len:%d\n", i, gi2c->cur->len); + + peripheral.stretch = 0; + if (i < num - 1) + peripheral.stretch = 1; + + peripheral.addr = msgs[i].addr; + + if (msgs[i].flags & I2C_M_RD) { + ret = geni_i2c_gpi(gi2c, &msgs[i], &config, + &rx_addr, &rx_buf, I2C_READ, gi2c->rx_c); + if (ret) + goto err; + } + + ret = geni_i2c_gpi(gi2c, &msgs[i], &config, + &tx_addr, &tx_buf, I2C_WRITE, gi2c->tx_c); + if (ret) + goto err; + + if (msgs[i].flags & I2C_M_RD) + dma_async_issue_pending(gi2c->rx_c); + dma_async_issue_pending(gi2c->tx_c); + + timeout = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT); + if (!timeout) { + dev_err(gi2c->se.dev, "I2C timeout gpi flags:%d addr:0x%x\n", + gi2c->cur->flags, gi2c->cur->addr); + gi2c->err = -ETIMEDOUT; + goto err; + } + + if (gi2c->err) { + ret = gi2c->err; + goto err; + } + + geni_i2c_gpi_unmap(gi2c, &msgs[i], tx_buf, tx_addr, rx_buf, rx_addr); + } + + return num; + +err: + dev_err(gi2c->se.dev, "GPI transfer failed: %d\n", ret); + dmaengine_terminate_sync(gi2c->rx_c); + dmaengine_terminate_sync(gi2c->tx_c); + geni_i2c_gpi_unmap(gi2c, &msgs[i], tx_buf, tx_addr, rx_buf, rx_addr); + return ret; +} + +static int geni_i2c_fifo_xfer(struct geni_i2c_dev *gi2c, + struct i2c_msg msgs[], int num) +{ + int i, ret = 0; + + for (i = 0; i < num; i++) { + u32 m_param = i < (num - 1) ? STOP_STRETCH : 0; + + m_param |= ((msgs[i].addr << SLV_ADDR_SHFT) & SLV_ADDR_MSK); + + gi2c->cur = &msgs[i]; + if (msgs[i].flags & I2C_M_RD) + ret = geni_i2c_rx_one_msg(gi2c, &msgs[i], m_param); + else + ret = geni_i2c_tx_one_msg(gi2c, &msgs[i], m_param); + + if (ret) + return ret; + } + + return num; +} + static int geni_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct geni_i2c_dev *gi2c = i2c_get_adapdata(adap); - int i, ret; + int ret; gi2c->err = 0; reinit_completion(&gi2c->done); @@ -475,28 +678,17 @@ static int geni_i2c_xfer(struct i2c_adapter *adap, } qcom_geni_i2c_conf(gi2c); - for (i = 0; i < num; i++) { - u32 m_param = i < (num - 1) ? STOP_STRETCH : 0; - - m_param |= ((msgs[i].addr << SLV_ADDR_SHFT) & SLV_ADDR_MSK); - - gi2c->cur = &msgs[i]; - if (msgs[i].flags & I2C_M_RD) - ret = geni_i2c_rx_one_msg(gi2c, &msgs[i], m_param); - else - ret = geni_i2c_tx_one_msg(gi2c, &msgs[i], m_param); - if (ret) - break; - } - if (ret == 0) - ret = num; + if (gi2c->gpi_mode) + ret = geni_i2c_gpi_xfer(gi2c, msgs, num); + else + ret = geni_i2c_fifo_xfer(gi2c, msgs, num); pm_runtime_mark_last_busy(gi2c->se.dev); pm_runtime_put_autosuspend(gi2c->se.dev); gi2c->cur = NULL; gi2c->err = 0; - return ret; + return num; } static u32 geni_i2c_func(struct i2c_adapter *adap) @@ -517,11 +709,50 @@ static const struct acpi_device_id geni_i2c_acpi_match[] = { MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match); #endif +static void release_gpi_dma(struct geni_i2c_dev *gi2c) +{ + if (gi2c->rx_c) + dma_release_channel(gi2c->rx_c); + + if (gi2c->tx_c) + dma_release_channel(gi2c->tx_c); +} + +static int setup_gpi_dma(struct geni_i2c_dev *gi2c) +{ + int ret; + + geni_se_select_mode(&gi2c->se, GENI_GPI_DMA); + gi2c->tx_c = dma_request_chan(gi2c->se.dev, "tx"); + if (IS_ERR(gi2c->tx_c)) { + ret = dev_err_probe(gi2c->se.dev, PTR_ERR(gi2c->tx_c), + "Failed to get tx DMA ch\n"); + if (ret < 0) + goto err_tx; + } + + gi2c->rx_c = dma_request_chan(gi2c->se.dev, "rx"); + if (IS_ERR(gi2c->rx_c)) { + ret = dev_err_probe(gi2c->se.dev, PTR_ERR(gi2c->rx_c), + "Failed to get rx DMA ch\n"); + if (ret < 0) + goto err_rx; + } + + dev_dbg(gi2c->se.dev, "Grabbed GPI dma channels\n"); + return 0; + +err_rx: + dma_release_channel(gi2c->tx_c); +err_tx: + return ret; +} + static int geni_i2c_probe(struct platform_device *pdev) { struct geni_i2c_dev *gi2c; struct resource *res; - u32 proto, tx_depth; + u32 proto, tx_depth, fifo_disable; int ret; struct device *dev = &pdev->dev; @@ -601,27 +832,43 @@ static int geni_i2c_probe(struct platform_device *pdev) return ret; } proto = geni_se_read_proto(&gi2c->se); - tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se); if (proto != GENI_SE_I2C) { dev_err(dev, "Invalid proto %d\n", proto); geni_se_resources_off(&gi2c->se); return -ENXIO; } - gi2c->tx_wm = tx_depth - 1; - geni_se_init(&gi2c->se, gi2c->tx_wm, tx_depth); - geni_se_config_packing(&gi2c->se, BITS_PER_BYTE, PACKING_BYTES_PW, - true, true, true); + + fifo_disable = readl_relaxed(gi2c->se.base + GENI_IF_DISABLE_RO) & FIFO_IF_DISABLE; + if (fifo_disable) { + /* FIFO is disabled, so we can only use GPI DMA */ + gi2c->gpi_mode = true; + ret = setup_gpi_dma(gi2c); + if (ret) { + dev_err(dev, "Failed to setup GPI DMA mode:%d ret\n", ret); + return ret; + } + + dev_dbg(dev, "Using GPI DMA mode for I2C\n"); + } else { + gi2c->gpi_mode = false; + tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se); + gi2c->tx_wm = tx_depth - 1; + geni_se_init(&gi2c->se, gi2c->tx_wm, tx_depth); + geni_se_config_packing(&gi2c->se, BITS_PER_BYTE, + PACKING_BYTES_PW, true, true, true); + + dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth); + } + ret = geni_se_resources_off(&gi2c->se); if (ret) { dev_err(dev, "Error turning off resources %d\n", ret); - return ret; + goto err_dma; } ret = geni_icc_disable(&gi2c->se); if (ret) - return ret; - - dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth); + goto err_dma; gi2c->suspended = 1; pm_runtime_set_suspended(gi2c->se.dev); @@ -633,12 +880,16 @@ static int geni_i2c_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "Error adding i2c adapter %d\n", ret); pm_runtime_disable(gi2c->se.dev); - return ret; + goto err_dma; } dev_dbg(dev, "Geni-I2C adaptor successfully added\n"); return 0; + +err_dma: + release_gpi_dma(gi2c); + return ret; } static int geni_i2c_remove(struct platform_device *pdev) @@ -646,6 +897,7 @@ static int geni_i2c_remove(struct platform_device *pdev) struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev); i2c_del_adapter(&gi2c->adap); + release_gpi_dma(gi2c); pm_runtime_disable(gi2c->se.dev); return 0; } diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index f71c730f9838..0db3d7559066 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -1008,6 +1008,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] = { { .compatible = "renesas,rcar-gen1-i2c", .data = (void *)I2C_RCAR_GEN1 }, { .compatible = "renesas,rcar-gen2-i2c", .data = (void *)I2C_RCAR_GEN2 }, { .compatible = "renesas,rcar-gen3-i2c", .data = (void *)I2C_RCAR_GEN3 }, + { .compatible = "renesas,rcar-gen4-i2c", .data = (void *)I2C_RCAR_GEN3 }, {}, }; MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids); diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index 8dfd27dc6149..cded77e06670 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -88,11 +88,6 @@ #define RIIC_INIT_MSG -1 -enum riic_type { - RIIC_RZ_A, - RIIC_RZ_G2L, -}; - struct riic_dev { void __iomem *base; u8 *buf; @@ -396,6 +391,11 @@ static struct riic_irq_desc riic_irqs[] = { { .res_num = 5, .isr = riic_tend_isr, .name = "riic-nack" }, }; +static void riic_reset_control_assert(void *data) +{ + reset_control_assert(data); +} + static int riic_i2c_probe(struct platform_device *pdev) { struct riic_dev *riic; @@ -404,7 +404,6 @@ static int riic_i2c_probe(struct platform_device *pdev) struct i2c_timings i2c_t; struct reset_control *rstc; int i, ret; - enum riic_type type; riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL); if (!riic) @@ -421,16 +420,18 @@ static int riic_i2c_probe(struct platform_device *pdev) return PTR_ERR(riic->clk); } - type = (enum riic_type)of_device_get_match_data(&pdev->dev); - if (type == RIIC_RZ_G2L) { - rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); - if (IS_ERR(rstc)) { - dev_err(&pdev->dev, "Error: missing reset ctrl\n"); - return PTR_ERR(rstc); - } + rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); + if (IS_ERR(rstc)) + return dev_err_probe(&pdev->dev, PTR_ERR(rstc), + "Error: missing reset ctrl\n"); - reset_control_deassert(rstc); - } + ret = reset_control_deassert(rstc); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&pdev->dev, riic_reset_control_assert, rstc); + if (ret) + return ret; for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) { ret = platform_get_irq(pdev, riic_irqs[i].res_num); @@ -492,8 +493,7 @@ static int riic_i2c_remove(struct platform_device *pdev) } static const struct of_device_id riic_i2c_dt_ids[] = { - { .compatible = "renesas,riic-r9a07g044", .data = (void *)RIIC_RZ_G2L }, - { .compatible = "renesas,riic-rz", .data = (void *)RIIC_RZ_A }, + { .compatible = "renesas,riic-rz", }, { /* Sentinel */ }, }; diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 03cea102ab76..2941e42aa6a0 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -1233,6 +1233,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, return err; i2c_dev->msg_buf = msg->buf; + + /* The condition true implies smbus block read and len is already read */ + if (msg->flags & I2C_M_RECV_LEN && end_state != MSG_END_CONTINUE) + i2c_dev->msg_buf = msg->buf + 1; + i2c_dev->msg_buf_remaining = msg->len; i2c_dev->msg_err = I2C_ERR_NONE; i2c_dev->msg_read = !!(msg->flags & I2C_M_RD); @@ -1389,6 +1394,15 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], else end_type = MSG_END_REPEAT_START; } + /* If M_RECV_LEN use ContinueXfer to read the first byte */ + if (msgs[i].flags & I2C_M_RECV_LEN) { + ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE); + if (ret) + break; + /* Set the read byte as msg len */ + msgs[i].len = msgs[i].buf[0]; + dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len); + } ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type); if (ret) break; @@ -1416,10 +1430,10 @@ static u32 tegra_i2c_func(struct i2c_adapter *adap) { struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap); u32 ret = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | - I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING; + I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING; if (i2c_dev->hw->has_continue_xfer_support) - ret |= I2C_FUNC_NOSTART; + ret |= I2C_FUNC_NOSTART | I2C_FUNC_SMBUS_READ_BLOCK_DATA; return ret; } diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index eb789cfb9973..ffefe3c482e9 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -734,7 +734,6 @@ static const struct i2c_adapter_quirks xiic_quirks = { static const struct i2c_adapter xiic_adapter = { .owner = THIS_MODULE, - .name = DRIVER_NAME, .class = I2C_CLASS_DEPRECATED, .algo = &xiic_algorithm, .quirks = &xiic_quirks, @@ -771,6 +770,8 @@ static int xiic_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(&i2c->adap, i2c); i2c->adap.dev.parent = &pdev->dev; i2c->adap.dev.of_node = pdev->dev.of_node; + snprintf(i2c->adap.name, sizeof(i2c->adap.name), + DRIVER_NAME " %s", pdev->name); mutex_init(&i2c->lock); diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index 85ed4c1d4924..08b561f0709d 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -236,7 +236,8 @@ static int i2c_acpi_get_info(struct acpi_device *adev, struct acpi_device *adapter_adev; /* The adapter must be present */ - if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev)) + adapter_adev = acpi_fetch_acpi_dev(lookup.adapter_handle); + if (!adapter_adev) return -ENODEV; if (acpi_bus_get_status(adapter_adev) || !adapter_adev->status.present) @@ -275,13 +276,10 @@ static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level, void *data, void **return_value) { struct i2c_adapter *adapter = data; - struct acpi_device *adev; + struct acpi_device *adev = acpi_fetch_acpi_dev(handle); struct i2c_board_info info; - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - - if (i2c_acpi_get_info(adev, &info, adapter, NULL)) + if (!adev || i2c_acpi_get_info(adev, &info, adapter, NULL)) return AE_OK; i2c_acpi_register_device(adapter, adev, &info); @@ -341,12 +339,9 @@ static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level, void *data, void **return_value) { struct i2c_acpi_lookup *lookup = data; - struct acpi_device *adev; - - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; + struct acpi_device *adev = acpi_fetch_acpi_dev(handle); - if (i2c_acpi_do_lookup(adev, lookup)) + if (!adev || i2c_acpi_do_lookup(adev, lookup)) return AE_OK; if (lookup->search_handle != lookup->adapter_handle) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 2c59dd748a49..d43db2c3876e 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -1424,7 +1424,7 @@ int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr) if (irq <= 0) return -ENXIO; - generic_handle_irq(irq); + generic_handle_irq_safe(irq); return 0; } @@ -1479,7 +1479,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap) goto out_list; } - res = of_i2c_setup_smbus_alert(adap); + res = i2c_setup_smbus_alert(adap); if (res) goto out_reg; diff --git a/drivers/i2c/i2c-core-slave.c b/drivers/i2c/i2c-core-slave.c index 1589179d5eb9..e3765e12f93b 100644 --- a/drivers/i2c/i2c-core-slave.c +++ b/drivers/i2c/i2c-core-slave.c @@ -14,6 +14,9 @@ #include "i2c-core.h" +#define CREATE_TRACE_POINTS +#include <trace/events/i2c_slave.h> + int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) { int ret; @@ -79,6 +82,18 @@ int i2c_slave_unregister(struct i2c_client *client) } EXPORT_SYMBOL_GPL(i2c_slave_unregister); +int i2c_slave_event(struct i2c_client *client, + enum i2c_slave_event event, u8 *val) +{ + int ret = client->slave_cb(client, event, val); + + if (trace_i2c_slave_enabled()) + trace_i2c_slave(client, event, val, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(i2c_slave_event); + /** * i2c_detect_slave_mode - detect operation mode * @dev: The device owning the bus diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index e5b2d1465e7e..e3b96fc53b5c 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -14,6 +14,7 @@ #include <linux/err.h> #include <linux/i2c.h> #include <linux/i2c-smbus.h> +#include <linux/property.h> #include <linux/slab.h> #include "i2c-core.h" @@ -701,13 +702,17 @@ struct i2c_client *i2c_new_smbus_alert_device(struct i2c_adapter *adapter, } EXPORT_SYMBOL_GPL(i2c_new_smbus_alert_device); -#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF) -int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter) +#if IS_ENABLED(CONFIG_I2C_SMBUS) +int i2c_setup_smbus_alert(struct i2c_adapter *adapter) { + struct device *parent = adapter->dev.parent; int irq; - irq = of_property_match_string(adapter->dev.of_node, "interrupt-names", - "smbus_alert"); + /* Adapter instantiated without parent, skip the SMBus alert setup */ + if (!parent) + return 0; + + irq = device_property_match_string(parent, "interrupt-names", "smbus_alert"); if (irq == -EINVAL || irq == -ENODATA) return 0; else if (irq < 0) @@ -715,5 +720,4 @@ int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter) return PTR_ERR_OR_ZERO(i2c_new_smbus_alert_device(adapter, NULL)); } -EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert); #endif diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h index 8ce261167a2d..87e2c914f1c5 100644 --- a/drivers/i2c/i2c-core.h +++ b/drivers/i2c/i2c-core.h @@ -86,3 +86,12 @@ void of_i2c_register_devices(struct i2c_adapter *adap); static inline void of_i2c_register_devices(struct i2c_adapter *adap) { } #endif extern struct notifier_block i2c_of_notifier; + +#if IS_ENABLED(CONFIG_I2C_SMBUS) +int i2c_setup_smbus_alert(struct i2c_adapter *adap); +#else +static inline int i2c_setup_smbus_alert(struct i2c_adapter *adap) +{ + return 0; +} +#endif diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index d3d06e3b4f3b..775332945ad0 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -13,7 +13,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_irq.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/workqueue.h> @@ -128,7 +128,8 @@ static int smbalert_probe(struct i2c_client *ara, if (setup) { irq = setup->irq; } else { - irq = of_irq_get_byname(adapter->dev.of_node, "smbus_alert"); + irq = fwnode_irq_get_byname(dev_fwnode(adapter->dev.parent), + "smbus_alert"); if (irq <= 0) return irq; } diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c index 5365199a31f4..f7a7405d4350 100644 --- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -261,7 +261,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev) err = device_create_file(&pdev->dev, &dev_attr_available_masters); if (err) - goto err_rollback; + goto err_rollback_activation; err = device_create_file(&pdev->dev, &dev_attr_current_master); if (err) @@ -271,8 +271,9 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev) err_rollback_available: device_remove_file(&pdev->dev, &dev_attr_available_masters); -err_rollback: +err_rollback_activation: i2c_demux_deactivate_master(priv); +err_rollback: for (j = 0; j < i; j++) { of_node_put(priv->chan[j].parent_np); of_changeset_destroy(&priv->chan[j].chgset); |