V4L/DVB (11287): Code cleanup (passes checkpatch now) of the b2c2-flexcop-drivers 1/2

This patch cleans up the source code of the b2c2 flexcop-driver. It is the first of a total of two.

The code is now passing the checkpatch-script.

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

15 files changed, 353 insertions, 394 deletions

diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile
index d9db066f9854..b97cf7208a18 100644
--- a/drivers/media/dvb/b2c2/Makefile
+++ b/drivers/media/dvb/b2c2/Makefile
@@ -2,7 +2,6 @@ b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \
 	flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o
 obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o
 
-
 ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),)
 b2c2-flexcop-objs += flexcop-dma.o
 endif
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
index 8ce06336e76f..3e1c472092ab 100644
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -28,11 +28,14 @@
 
 /* Steal from usb.h */
 #undef err
-#define err(format,  arg...) printk(KERN_ERR     FC_LOG_PREFIX ": " format "\n" , ## arg)
+#define err(format, arg...) \
+	printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
 #undef info
-#define info(format, arg...) printk(KERN_INFO    FC_LOG_PREFIX ": " format "\n" , ## arg)
+#define info(format, arg...) \
+	printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
 #undef warn
-#define warn(format, arg...) printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
+#define warn(format, arg...) \
+	printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
 
 struct flexcop_dma {
 	struct pci_dev *pdev;
@@ -91,16 +94,14 @@ struct flexcop_device {
 	int fullts_streaming_state;
 
 	/* bus specific callbacks */
-	flexcop_ibi_value (*read_ibi_reg)  (struct flexcop_device *, flexcop_ibi_register);
-	int               (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value);
-
-
-	int (*i2c_request) (struct flexcop_i2c_adapter*,
+	flexcop_ibi_value(*read_ibi_reg) (struct flexcop_device *,
+			flexcop_ibi_register);
+	int (*write_ibi_reg) (struct flexcop_device *,
+			flexcop_ibi_register, flexcop_ibi_value);
+	int (*i2c_request) (struct flexcop_i2c_adapter *,
 		flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
-	int (*stream_control) (struct flexcop_device*, int);
-
+	int (*stream_control) (struct flexcop_device *, int);
 	int (*get_mac_addr) (struct flexcop_device *fc, int extended);
-
 	void *bus_specific;
 };
 
@@ -111,22 +112,28 @@ void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len);
 void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no);
 
 struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len);
-void flexcop_device_kfree(struct flexcop_device*);
+void flexcop_device_kfree(struct flexcop_device *);
 
-int  flexcop_device_initialize(struct flexcop_device*);
+int flexcop_device_initialize(struct flexcop_device *);
 void flexcop_device_exit(struct flexcop_device *fc);
-
 void flexcop_reset_block_300(struct flexcop_device *fc);
 
 /* from flexcop-dma.c */
-int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size);
+int flexcop_dma_allocate(struct pci_dev *pdev,
+		struct flexcop_dma *dma, u32 size);
 void flexcop_dma_free(struct flexcop_dma *dma);
 
-int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
-int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
-int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx);
-int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff);
-int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
+int flexcop_dma_control_timer_irq(struct flexcop_device *fc,
+		flexcop_dma_index_t no, int onoff);
+int flexcop_dma_control_size_irq(struct flexcop_device *fc,
+		flexcop_dma_index_t no, int onoff);
+int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma,
+		flexcop_dma_index_t dma_idx);
+int flexcop_dma_xfer_control(struct flexcop_device *fc,
+		flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index,
+		int onoff);
+int flexcop_dma_config_timer(struct flexcop_device *fc,
+		flexcop_dma_index_t dma_idx, u8 cycles);
 
 /* from flexcop-eeprom.c */
 /* the PCI part uses this call to get the MAC address, the USB part has its own */
@@ -141,13 +148,15 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter*, flexcop_access_op_t,
 	u8 chipaddr, u8 addr, u8 *buf, u16 len);
 
 /* from flexcop-sram.c */
-int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest,
+	flexcop_sram_dest_target_t target);
 void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s);
-void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill);
+void flexcop_sram_ctrl(struct flexcop_device *fc,
+		int usb_wan, int sramdma, int maximumfill);
 
 /* global prototypes for the flexcop-chip */
 /* from flexcop-fe-tuner.c */
-int flexcop_frontend_init(struct flexcop_device *card);
+int flexcop_frontend_init(struct flexcop_device *fc);
 void flexcop_frontend_exit(struct flexcop_device *fc);
 
 /* from flexcop-i2c.c */
@@ -159,11 +168,14 @@ int flexcop_sram_init(struct flexcop_device *fc);
 
 /* from flexcop-misc.c */
 void flexcop_determine_revision(struct flexcop_device *fc);
-void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix);
-void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num);
+void flexcop_device_name(struct flexcop_device *fc,
+		const char *prefix, const char *suffix);
+void flexcop_dump_reg(struct flexcop_device *fc,
+		flexcop_ibi_register reg, int num);
 
 /* from flexcop-hw-filter.c */
-int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff);
+int flexcop_pid_feed_control(struct flexcop_device *fc,
+		struct dvb_demux_feed *dvbdmxfeed, int onoff);
 void flexcop_hw_filter_init(struct flexcop_device *fc);
 
 void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff);
diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c
index 26f0011a5078..2881e0d956ad 100644
--- a/drivers/media/dvb/b2c2/flexcop-dma.c
+++ b/drivers/media/dvb/b2c2/flexcop-dma.c
@@ -1,13 +1,12 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-dma.c - methods for configuring and controlling the DMA of the FlexCop.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-dma.c - configuring and controlling the DMA of the FlexCop
+ * see flexcop.c for copyright information
  */
 #include "flexcop.h"
 
-int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size)
+int flexcop_dma_allocate(struct pci_dev *pdev,
+		struct flexcop_dma *dma, u32 size)
 {
 	u8 *tcpu;
 	dma_addr_t tdma = 0;
@@ -32,7 +31,8 @@ EXPORT_SYMBOL(flexcop_dma_allocate);
 
 void flexcop_dma_free(struct flexcop_dma *dma)
 {
-	pci_free_consistent(dma->pdev, dma->size*2,dma->cpu_addr0, dma->dma_addr0);
+	pci_free_consistent(dma->pdev, dma->size*2,
+			dma->cpu_addr0, dma->dma_addr0);
 	memset(dma,0,sizeof(struct flexcop_dma));
 }
 EXPORT_SYMBOL(flexcop_dma_free);
@@ -44,8 +44,8 @@ int flexcop_dma_config(struct flexcop_device *fc,
 	flexcop_ibi_value v0x0,v0x4,v0xc;
 	v0x0.raw = v0x4.raw = v0xc.raw = 0;
 
-	v0x0.dma_0x0.dma_address0        = dma->dma_addr0 >> 2;
-	v0xc.dma_0xc.dma_address1        = dma->dma_addr1 >> 2;
+	v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2;
+	v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2;
 	v0x4.dma_0x4_write.dma_addr_size = dma->size / 4;
 
 	if ((dma_idx & FC_DMA_1) == dma_idx) {
@@ -57,7 +57,8 @@ int flexcop_dma_config(struct flexcop_device *fc,
 		fc->write_ibi_reg(fc,dma2_014,v0x4);
 		fc->write_ibi_reg(fc,dma2_01c,v0xc);
 	} else {
-		err("either DMA1 or DMA2 can be configured at the within one flexcop_dma_config call.");
+		err("either DMA1 or DMA2 can be configured within one "
+			"flexcop_dma_config call.");
 		return -EINVAL;
 	}
 
@@ -81,7 +82,8 @@ int flexcop_dma_xfer_control(struct flexcop_device *fc,
 		r0x0 = dma2_010;
 		r0xc = dma2_01c;
 	} else {
-		err("either transfer DMA1 or DMA2 can be started within one flexcop_dma_xfer_control call.");
+		err("either transfer DMA1 or DMA2 can be started within one "
+			"flexcop_dma_xfer_control call.");
 		return -EINVAL;
 	}
 
@@ -154,8 +156,7 @@ EXPORT_SYMBOL(flexcop_dma_control_timer_irq);
 
 /* 1 cycles = 1.97 msec */
 int flexcop_dma_config_timer(struct flexcop_device *fc,
-		flexcop_dma_index_t dma_idx,
-		u8 cycles)
+		flexcop_dma_index_t dma_idx, u8 cycles)
 {
 	flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
 	flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/dvb/b2c2/flexcop-eeprom.c
index 8a8ae8a3e6ba..a25373a9bd84 100644
--- a/drivers/media/dvb/b2c2/flexcop-eeprom.c
+++ b/drivers/media/dvb/b2c2/flexcop-eeprom.c
@@ -1,9 +1,7 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used)
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading)
+ * see flexcop.c for copyright information
  */
 #include "flexcop.h"
 
@@ -14,17 +12,17 @@ static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
 	return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
 }
 
-static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries)
+static int eeprom_lrc_write(struct adapter *adapter, u32 addr,
+		u32 len, u8 *wbuf, u8 *rbuf, int retries)
 {
-	int i;
+int i;
 
-	for (i = 0; i < retries; i++) {
-		if (eeprom_write(adapter, addr, wbuf, len) == len) {
-			if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
-				return 1;
+for (i = 0; i < retries; i++) {
+	if (eeprom_write(adapter, addr, wbuf, len) == len) {
+		if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
+			return 1;
 		}
 	}
-
 	return 0;
 }
 
@@ -39,12 +37,10 @@ static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
 		return 0;
 
 	memcpy(wbuf, key, len);
-
 	wbuf[16] = 0;
 	wbuf[17] = 0;
 	wbuf[18] = 0;
 	wbuf[19] = calc_lrc(wbuf, 19);
-
 	return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
 }
 
@@ -59,7 +55,6 @@ static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
 		return 0;
 
 	memcpy(key, buf, len);
-
 	return 1;
 }
 
@@ -74,9 +69,7 @@ static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
 		tmp[3] = mac[5];
 		tmp[4] = mac[6];
 		tmp[5] = mac[7];
-
 	} else {
-
 		tmp[0] = mac[0];
 		tmp[1] = mac[1];
 		tmp[2] = mac[2];
@@ -90,11 +83,11 @@ static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
 
 	if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
 		return 1;
-
 	return 0;
 }
 
-static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len)
+static int flexcop_eeprom_read(struct flexcop_device *fc,
+		u16 addr, u8 *buf, u16 len)
 {
 	return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
 }
@@ -110,7 +103,8 @@ static u8 calc_lrc(u8 *buf, int len)
 	return sum;
 }
 
-static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
+static int flexcop_eeprom_request(struct flexcop_device *fc,
+	flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
 {
 	int i,ret = 0;
 	u8 chipaddr =  0x50 | ((addr >> 8) & 3);
@@ -123,7 +117,8 @@ static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t
 	return ret;
 }
 
-static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries)
+static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr,
+		u8 *buf, u16 len, int retries)
 {
 	int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries);
 	if (ret == 0)
@@ -133,8 +128,7 @@ static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf,
 }
 
 /* JJ's comment about extended == 1: it is not presently used anywhere but was
- * added to the low-level functions for possible support of EUI64
- */
+ * added to the low-level functions for possible support of EUI64 */
 int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
 {
 	u8 buf[8];
@@ -142,12 +136,9 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
 
 	if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
 		if (extended != 0) {
-			err("TODO: extended (EUI64) MAC addresses aren't completely supported yet");
+			err("TODO: extended (EUI64) MAC addresses aren't "
+				"completely supported yet");
 			ret = -EINVAL;
-/*			memcpy(fc->dvb_adapter.proposed_mac,buf,3);
-			mac[3] = 0xfe;
-			mac[4] = 0xff;
-			memcpy(&fc->dvb_adapter.proposed_mac[3],&buf[5],3); */
 		} else
 			memcpy(fc->dvb_adapter.proposed_mac,buf,6);
 	}
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 5cded3708541..f7afab5944cf 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -592,14 +592,14 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 		fc->fe_sleep = ops->sleep;
 		ops->sleep = flexcop_sleep;
 
-		fc->dev_type = FC_SKY;
+		fc->dev_type = FC_SKY_REV26;
 		goto fe_found;
 	}
 
 	/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
 	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
 	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_DVB;
+		fc->dev_type = FC_AIR_DVBT;
 		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
 		goto fe_found;
 	}
@@ -653,7 +653,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 		fc->fe_sleep                = ops->sleep;
 		ops->sleep                  = flexcop_sleep;
 
-		fc->dev_type                = FC_SKY_OLD;
+		fc->dev_type                = FC_SKY_REV23;
 		goto fe_found;
 	}
 
diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
index 451974ba32f3..77e45475f4c7 100644
--- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c
+++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
@@ -1,33 +1,30 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-hw-filter.c - pid and mac address filtering and corresponding control functions.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-hw-filter.c - pid and mac address filtering and control functions
+ * see flexcop.c for copyright information
  */
 #include "flexcop.h"
 
 static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff)
 {
-	flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff);
-
-	deb_ts("rcv_data is now: '%s'\n",onoff ? "on" : "off");
+	flexcop_set_ibi_value(ctrl_208, Rcv_Data_sig, onoff);
+	deb_ts("rcv_data is now: '%s'\n", onoff ? "on" : "off");
 }
 
 void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff)
 {
-	flexcop_set_ibi_value(ctrl_208,SMC_Enable_sig,onoff);
+	flexcop_set_ibi_value(ctrl_208, SMC_Enable_sig, onoff);
 }
 
 static void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff)
 {
-	flexcop_set_ibi_value(ctrl_208,Null_filter_sig,onoff);
+	flexcop_set_ibi_value(ctrl_208, Null_filter_sig, onoff);
 }
 
 void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6])
 {
-	flexcop_ibi_value v418,v41c;
-	v41c = fc->read_ibi_reg(fc,mac_address_41c);
+	flexcop_ibi_value v418, v41c;
+	v41c = fc->read_ibi_reg(fc, mac_address_41c);
 
 	v418.mac_address_418.MAC1 = mac[0];
 	v418.mac_address_418.MAC2 = mac[1];
@@ -36,27 +33,28 @@ void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6])
 	v41c.mac_address_41c.MAC7 = mac[4];
 	v41c.mac_address_41c.MAC8 = mac[5];
 
-	fc->write_ibi_reg(fc,mac_address_418,v418);
-	fc->write_ibi_reg(fc,mac_address_41c,v41c);
+	fc->write_ibi_reg(fc, mac_address_418, v418);
+	fc->write_ibi_reg(fc, mac_address_41c, v41c);
 }
 
 void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff)
 {
-	flexcop_set_ibi_value(ctrl_208,MAC_filter_Mode_sig,onoff);
+	flexcop_set_ibi_value(ctrl_208, MAC_filter_Mode_sig, onoff);
 }
 
-static void flexcop_pid_group_filter(struct flexcop_device *fc, u16 pid, u16 mask)
+static void flexcop_pid_group_filter(struct flexcop_device *fc,
+		u16 pid, u16 mask)
 {
 	/* index_reg_310.extra_index_reg need to 0 or 7 to work */
 	flexcop_ibi_value v30c;
 	v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid;
 	v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask;
-	fc->write_ibi_reg(fc,pid_filter_30c,v30c);
+	fc->write_ibi_reg(fc, pid_filter_30c, v30c);
 }
 
 static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff)
 {
-	flexcop_set_ibi_value(ctrl_208,Mask_filter_sig,onoff);
+	flexcop_set_ibi_value(ctrl_208, Mask_filter_sig, onoff);
 }
 
 /* this fancy define reduces the code size of the quite similar PID controlling of
@@ -65,91 +63,112 @@ static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff)
 
 #define pid_ctrl(vregname,field,enablefield,trans_field,transval) \
 	flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \
-					  v208 = fc->read_ibi_reg(fc, ctrl_208); \
-\
-	vpid.vregname.field = onoff ? pid : 0x1fff; \
-	vpid.vregname.trans_field = transval; \
-	v208.ctrl_208.enablefield = onoff; \
-\
-	fc->write_ibi_reg(fc,vregname,vpid); \
-	fc->write_ibi_reg(fc,ctrl_208,v208);
+v208 = fc->read_ibi_reg(fc, ctrl_208); \
+vpid.vregname.field = onoff ? pid : 0x1fff; \
+vpid.vregname.trans_field = transval; \
+v208.ctrl_208.enablefield = onoff; \
+fc->write_ibi_reg(fc, vregname, vpid); \
+fc->write_ibi_reg(fc, ctrl_208, v208);
 
-static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc,
+		u16 pid, int onoff)
 {
-	pid_ctrl(pid_filter_300,Stream1_PID,Stream1_filter_sig,Stream1_trans,0);
+	pid_ctrl(pid_filter_300, Stream1_PID, Stream1_filter_sig,
+			Stream1_trans, 0);
 }
 
-static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc,
+		u16 pid, int onoff)
 {
-	pid_ctrl(pid_filter_300,Stream2_PID,Stream2_filter_sig,Stream2_trans,0);
+	pid_ctrl(pid_filter_300, Stream2_PID, Stream2_filter_sig,
+			Stream2_trans, 0);
 }
 
-static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc,
+		u16 pid, int onoff)
 {
-	pid_ctrl(pid_filter_304,PCR_PID,PCR_filter_sig,PCR_trans,0);
+	pid_ctrl(pid_filter_304, PCR_PID, PCR_filter_sig, PCR_trans, 0);
 }
 
-static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc,
+		u16 pid, int onoff)
 {
-	pid_ctrl(pid_filter_304,PMT_PID,PMT_filter_sig,PMT_trans,0);
+	pid_ctrl(pid_filter_304, PMT_PID, PMT_filter_sig, PMT_trans, 0);
 }
 
-static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc,
+		u16 pid, int onoff)
 {
-	pid_ctrl(pid_filter_308,EMM_PID,EMM_filter_sig,EMM_trans,0);
+	pid_ctrl(pid_filter_308, EMM_PID, EMM_filter_sig, EMM_trans, 0);
 }
 
-static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc,
+		u16 pid, int onoff)
 {
-	pid_ctrl(pid_filter_308,ECM_PID,ECM_filter_sig,ECM_trans,0);
+	pid_ctrl(pid_filter_308, ECM_PID, ECM_filter_sig, ECM_trans, 0);
 }
 
-static void flexcop_pid_control(struct flexcop_device *fc, int index, u16 pid,int onoff)
+static void flexcop_pid_control(struct flexcop_device *fc,
+		int index, u16 pid, int onoff)
 {
 	if (pid == 0x2000)
 		return;
 
-	deb_ts("setting pid: %5d %04x at index %d '%s'\n",pid,pid,index,onoff ? "on" : "off");
+	deb_ts("setting pid: %5d %04x at index %d '%s'\n",
+			pid, pid, index, onoff ? "on" : "off");
 
 	/* We could use bit magic here to reduce source code size.
 	 * I decided against it, but to use the real register names */
 	switch (index) {
-		case 0: flexcop_pid_Stream1_PID_ctrl(fc,pid,onoff); break;
-		case 1: flexcop_pid_Stream2_PID_ctrl(fc,pid,onoff); break;
-		case 2: flexcop_pid_PCR_PID_ctrl(fc,pid,onoff); break;
-		case 3: flexcop_pid_PMT_PID_ctrl(fc,pid,onoff); break;
-		case 4: flexcop_pid_EMM_PID_ctrl(fc,pid,onoff); break;
-		case 5:	flexcop_pid_ECM_PID_ctrl(fc,pid,onoff); break;
-		default:
-			if (fc->has_32_hw_pid_filter && index < 38) {
-				flexcop_ibi_value vpid,vid;
-
-				/* set the index */
-				vid = fc->read_ibi_reg(fc,index_reg_310);
-				vid.index_reg_310.index_reg = index - 6;
-				fc->write_ibi_reg(fc,index_reg_310, vid);
-
-				vpid = fc->read_ibi_reg(fc,pid_n_reg_314);
-				vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff;
-				vpid.pid_n_reg_314.PID_enable_bit = onoff;
-				fc->write_ibi_reg(fc,pid_n_reg_314, vpid);
-			}
-			break;
+	case 0:
+		flexcop_pid_Stream1_PID_ctrl(fc, pid, onoff);
+		break;
+	case 1:
+		flexcop_pid_Stream2_PID_ctrl(fc, pid, onoff);
+		break;
+	case 2:
+		flexcop_pid_PCR_PID_ctrl(fc, pid, onoff);
+		break;
+	case 3:
+		flexcop_pid_PMT_PID_ctrl(fc, pid, onoff);
+		break;
+	case 4:
+		flexcop_pid_EMM_PID_ctrl(fc, pid, onoff);
+		break;
+	case 5:
+		flexcop_pid_ECM_PID_ctrl(fc, pid, onoff);
+		break;
+	default:
+		if (fc->has_32_hw_pid_filter && index < 38) {
+			flexcop_ibi_value vpid, vid;
+
+			/* set the index */
+			vid = fc->read_ibi_reg(fc, index_reg_310);
+			vid.index_reg_310.index_reg = index - 6;
+			fc->write_ibi_reg(fc, index_reg_310, vid);
+
+			vpid = fc->read_ibi_reg(fc, pid_n_reg_314);
+			vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff;
+			vpid.pid_n_reg_314.PID_enable_bit = onoff;
+			fc->write_ibi_reg(fc, pid_n_reg_314, vpid);
+		}
+		break;
 	}
 }
 
-static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc,int onoff)
+static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc, int onoff)
 {
 	if (fc->fullts_streaming_state != onoff) {
 		deb_ts("%s full TS transfer\n",onoff ? "enabling" : "disabling");
 		flexcop_pid_group_filter(fc, 0, 0x1fe0 * (!onoff));
-		flexcop_pid_group_filter_ctrl(fc,onoff);
+		flexcop_pid_group_filter_ctrl(fc, onoff);
 		fc->fullts_streaming_state = onoff;
 	}
 	return 0;
 }
 
-int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff)
+int flexcop_pid_feed_control(struct flexcop_device *fc,
+		struct dvb_demux_feed *dvbdmxfeed, int onoff)
 {
 	int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32;
 
@@ -164,24 +183,25 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d
 	 *   - or the requested pid is 0x2000 */
 
 	if (!fc->pid_filtering && fc->feedcount == onoff)
-		flexcop_toggle_fullts_streaming(fc,onoff);
+		flexcop_toggle_fullts_streaming(fc, onoff);
 
 	if (fc->pid_filtering) {
-		flexcop_pid_control(fc,dvbdmxfeed->index,dvbdmxfeed->pid,onoff);
+		flexcop_pid_control \
+			(fc, dvbdmxfeed->index, dvbdmxfeed->pid, onoff);
 
 		if (fc->extra_feedcount > 0)
-			flexcop_toggle_fullts_streaming(fc,1);
+			flexcop_toggle_fullts_streaming(fc, 1);
 		else if (dvbdmxfeed->pid == 0x2000)
-			flexcop_toggle_fullts_streaming(fc,onoff);
+			flexcop_toggle_fullts_streaming(fc, onoff);
 		else
-			flexcop_toggle_fullts_streaming(fc,0);
+			flexcop_toggle_fullts_streaming(fc, 0);
 	}
 
 	/* if it was the first or last feed request change the stream-status */
 	if (fc->feedcount == onoff) {
-		flexcop_rcv_data_ctrl(fc,onoff);
+		flexcop_rcv_data_ctrl(fc, onoff);
 		if (fc->stream_control) /* device specific stream control */
-			fc->stream_control(fc,onoff);
+			fc->stream_control(fc, onoff);
 
 		/* feeding stopped -> reset the flexcop filter*/
 		if (onoff == 0) {
@@ -189,7 +209,6 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d
 			flexcop_hw_filter_init(fc);
 		}
 	}
-
 	return 0;
 }
 EXPORT_SYMBOL(flexcop_pid_feed_control);
@@ -199,15 +218,15 @@ void flexcop_hw_filter_init(struct flexcop_device *fc)
 	int i;
 	flexcop_ibi_value v;
 	for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++)
-		flexcop_pid_control(fc,i,0x1fff,0);
+		flexcop_pid_control(fc, i, 0x1fff, 0);
 
 	flexcop_pid_group_filter(fc, 0, 0x1fe0);
-	flexcop_pid_group_filter_ctrl(fc,0);
+	flexcop_pid_group_filter_ctrl(fc, 0);
 
-	v = fc->read_ibi_reg(fc,pid_filter_308);
+	v = fc->read_ibi_reg(fc, pid_filter_308);
 	v.pid_filter_308.EMM_filter_4 = 1;
 	v.pid_filter_308.EMM_filter_6 = 0;
-	fc->write_ibi_reg(fc,pid_filter_308,v);
+	fc->write_ibi_reg(fc, pid_filter_308, v);
 
 	flexcop_null_filter_ctrl(fc, 1);
 }
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
index a0cfde18e640..e2bed5076485 100644
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -1,17 +1,14 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
- *
- * see flexcop.c for copyright information.
+ * see flexcop.c for copyright information
  */
 #include "flexcop.h"
 
 #define FC_MAX_I2C_RETRIES 100000
 
-/* #define DUMP_I2C_MESSAGES */
-
-static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100)
+static int flexcop_i2c_operation(struct flexcop_device *fc,
+		flexcop_ibi_value *r100)
 {
 	int i;
 	flexcop_ibi_value r;
@@ -26,7 +23,7 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r
 		r = fc->read_ibi_reg(fc, tw_sm_c_100);
 
 		if (!r.tw_sm_c_100.no_base_addr_ack_error) {
-			if (r.tw_sm_c_100.st_done) {  /* && !r.tw_sm_c_100.working_start */
+			if (r.tw_sm_c_100.st_done) {
 				*r100 = r;
 				deb_i2c("i2c success\n");
 				return 0;
@@ -36,15 +33,17 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r
 			return -EREMOTEIO;
 		}
 	}
-	deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i);
+	deb_i2c("tried %d times i2c operation, "
+			"never finished or too many ack errors.\n", i);
 	return -EREMOTEIO;
 }
 
 static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
-	flexcop_ibi_value r100, u8 *buf)
+		flexcop_ibi_value r100, u8 *buf)
 {
 	flexcop_ibi_value r104;
-	int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
+	int len = r100.tw_sm_c_100.total_bytes,
+		/* remember total_bytes is buflen-1 */
 		ret;
 
 	/* work-around to have CableStar2 and SkyStar2 rev 2.7 work
@@ -81,11 +80,11 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
 		if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
 		if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
 	}
-
 	return 0;
 }
 
-static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
+static int flexcop_i2c_write4(struct flexcop_device *fc,
+		flexcop_ibi_value r100, u8 *buf)
 {
 	flexcop_ibi_value r104;
 	int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
@@ -93,7 +92,6 @@ static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100,
 
 	/* there is at least one byte, otherwise we wouldn't be here */
 	r100.tw_sm_c_100.data1_reg = buf[0];
-
 	r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
 	r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
 	r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
@@ -106,7 +104,7 @@ static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100,
 }
 
 int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
-	flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+		flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
 {
 	int ret;
 
@@ -129,7 +127,6 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
 		printk("rd(");
 	else
 		printk("wr(");
-
 	printk("%02x): %02x ", chipaddr, addr);
 #endif
 
@@ -175,7 +172,8 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
 EXPORT_SYMBOL(flexcop_i2c_request);
 
 /* master xfer callback for demodulator */
-static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+static int flexcop_master_xfer(struct i2c_adapter *i2c_adap,
+		struct i2c_msg msgs[], int num)
 {
 	struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap);
 	int i, ret = 0;
@@ -194,12 +192,13 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs
 		/* reading */
 		if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) {
 			ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr,
-				msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len);
+					msgs[i].buf[0], msgs[i+1].buf,
+					msgs[i+1].len);
 			i++; /* skip the following message */
 		} else /* writing */
 			ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr,
-				msgs[i].buf[0], &msgs[i].buf[1],
-				msgs[i].len - 1);
+					msgs[i].buf[0], &msgs[i].buf[1],
+					msgs[i].len - 1);
 		if (ret < 0) {
 			err("i2c master_xfer failed");
 			break;
@@ -226,23 +225,21 @@ static struct i2c_algorithm flexcop_algo = {
 int flexcop_i2c_init(struct flexcop_device *fc)
 {
 	int ret;
-
 	mutex_init(&fc->i2c_mutex);
 
 	fc->fc_i2c_adap[0].fc = fc;
 	fc->fc_i2c_adap[1].fc = fc;
 	fc->fc_i2c_adap[2].fc = fc;
-
 	fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD;
 	fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
 	fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
 
 	strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
-		sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+			sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
 	strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
-		sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+			sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
 	strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
-		sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
+			sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
 
 	i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
 	i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
@@ -280,7 +277,6 @@ adap_2_failed:
 	i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
 adap_1_failed:
 	i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
-
 	return ret;
 }
 
@@ -291,6 +287,5 @@ void flexcop_i2c_exit(struct flexcop_device *fc)
 		i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
 		i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
 	}
-
 	fc->init_state &= ~FC_STATE_I2C_INIT;
 }
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
index 93d20e56f909..e56627d2f0f4 100644
--- a/drivers/media/dvb/b2c2/flexcop-misc.c
+++ b/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -1,9 +1,7 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-misc.c - miscellaneous functions.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-misc.c - miscellaneous functions
+ * see flexcop.c for copyright information
  */
 #include "flexcop.h"
 
@@ -12,39 +10,43 @@ void flexcop_determine_revision(struct flexcop_device *fc)
 	flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204);
 
 	switch (v.misc_204.Rev_N_sig_revision_hi) {
-		case 0x2:
-			deb_info("found a FlexCopII.\n");
-			fc->rev = FLEXCOP_II;
-			break;
-		case 0x3:
-			deb_info("found a FlexCopIIb.\n");
-			fc->rev = FLEXCOP_IIB;
-			break;
-		case 0x0:
-			deb_info("found a FlexCopIII.\n");
-			fc->rev = FLEXCOP_III;
-			break;
-		default:
-			err("unkown FlexCop Revision: %x. Please report the linux-dvb@linuxtv.org.",v.misc_204.Rev_N_sig_revision_hi);
-			break;
+	case 0x2:
+		deb_info("found a FlexCopII.\n");
+		fc->rev = FLEXCOP_II;
+		break;
+	case 0x3:
+		deb_info("found a FlexCopIIb.\n");
+		fc->rev = FLEXCOP_IIB;
+		break;
+	case 0x0:
+		deb_info("found a FlexCopIII.\n");
+		fc->rev = FLEXCOP_III;
+		break;
+	default:
+		err("unknown FlexCop Revision: %x. Please report this to "
+				"linux-dvb@linuxtv.org.",
+				v.misc_204.Rev_N_sig_revision_hi);
+		break;
 	}
 
 	if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
-		deb_info("this FlexCop has the additional 32 hardware pid filter.\n");
+		deb_info("this FlexCop has "
+				"the additional 32 hardware pid filter.\n");
 	else
-		deb_info("this FlexCop has only the 6 basic main hardware pid filter.\n");
+		deb_info("this FlexCop has "
+				"the 6 basic main hardware pid filter.\n");
 	/* bus parts have to decide if hw pid filtering is used or not. */
 }
 
 static const char *flexcop_revision_names[] = {
-	"Unkown chip",
+	"Unknown chip",
 	"FlexCopII",
 	"FlexCopIIb",
 	"FlexCopIII",
 };
 
 static const char *flexcop_device_names[] = {
-	"Unkown device",
+	"Unknown device",
 	"Air2PC/AirStar 2 DVB-T",
 	"Air2PC/AirStar 2 ATSC 1st generation",
 	"Air2PC/AirStar 2 ATSC 2nd generation",
@@ -61,21 +63,23 @@ static const char *flexcop_bus_names[] = {
 	"PCI",
 };
 
-void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const
-		char *suffix)
+void flexcop_device_name(struct flexcop_device *fc,
+		const char *prefix, const char *suffix)
 {
-	info("%s '%s' at the '%s' bus controlled by a '%s' %s",prefix,
-			flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type],
-			flexcop_revision_names[fc->rev],suffix);
+	info("%s '%s' at the '%s' bus controlled by a '%s' %s",
+			prefix,	flexcop_device_names[fc->dev_type],
+			flexcop_bus_names[fc->bus_type],
+			flexcop_revision_names[fc->rev], suffix);
 }
 
-void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num)
+void flexcop_dump_reg(struct flexcop_device *fc,
+		flexcop_ibi_register reg, int num)
 {
 	flexcop_ibi_value v;
 	int i;
 	for (i = 0; i < num; i++) {
-		v = fc->read_ibi_reg(fc,reg+4*i);
-		deb_rdump("0x%03x: %08x, ",reg+4*i, v.raw);
+		v = fc->read_ibi_reg(fc, reg+4*i);
+		deb_rdump("0x%03x: %08x, ", reg+4*i, v.raw);
 	}
 	deb_rdump("\n");
 }
diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h
index 7599fccc1a5b..dc4528dcbb98 100644
--- a/drivers/media/dvb/b2c2/flexcop-reg.h
+++ b/drivers/media/dvb/b2c2/flexcop-reg.h
@@ -1,14 +1,11 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII
- *
- * see flexcop.c for copyright information.
+ * see flexcop.c for copyright information
  */
 #ifndef __FLEXCOP_REG_H__
 #define __FLEXCOP_REG_H__
 
-
 typedef enum {
 	FLEXCOP_UNK = 0,
 	FLEXCOP_II,
@@ -18,13 +15,13 @@ typedef enum {
 
 typedef enum {
 	FC_UNK = 0,
-	FC_AIR_DVB,
+	FC_CABLE,
+	FC_AIR_DVBT,
 	FC_AIR_ATSC1,
 	FC_AIR_ATSC2,
-	FC_SKY,
-	FC_SKY_OLD,
-	FC_CABLE,
 	FC_AIR_ATSC3,
+	FC_SKY_REV23,
+	FC_SKY_REV26,
 	FC_SKY_REV27,
 	FC_SKY_REV28,
 } flexcop_device_type_t;
@@ -36,12 +33,12 @@ typedef enum {
 
 /* FlexCop IBI Registers */
 #if defined(__LITTLE_ENDIAN)
-	#include "flexcop_ibi_value_le.h"
+#include "flexcop_ibi_value_le.h"
 #else
 #if defined(__BIG_ENDIAN)
-	#include "flexcop_ibi_value_be.h"
+#include "flexcop_ibi_value_be.h"
 #else
-	#error no endian defined
+#error no endian defined
 #endif
 #endif
 
diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/dvb/b2c2/flexcop-sram.c
index cda69528548a..f2199e43e803 100644
--- a/drivers/media/dvb/b2c2/flexcop-sram.c
+++ b/drivers/media/dvb/b2c2/flexcop-sram.c
@@ -1,45 +1,43 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-sram.c - functions for controlling the SRAM.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-sram.c - functions for controlling the SRAM
+ * see flexcop.c for copyright information
  */
 #include "flexcop.h"
 
-static void flexcop_sram_set_chip (struct flexcop_device *fc, flexcop_sram_type_t type)
+static void flexcop_sram_set_chip(struct flexcop_device *fc,
+		flexcop_sram_type_t type)
 {
-	flexcop_set_ibi_value(wan_ctrl_reg_71c,sram_chip,type);
+	flexcop_set_ibi_value(wan_ctrl_reg_71c, sram_chip, type);
 }
 
 int flexcop_sram_init(struct flexcop_device *fc)
 {
 	switch (fc->rev) {
-		case FLEXCOP_II:
-		case FLEXCOP_IIB:
-			flexcop_sram_set_chip(fc,FC_SRAM_1_32KB);
-			break;
-		case FLEXCOP_III:
-			flexcop_sram_set_chip(fc,FC_SRAM_1_48KB);
-			break;
-		default:
-			return -EINVAL;
+	case FLEXCOP_II:
+	case FLEXCOP_IIB:
+		flexcop_sram_set_chip(fc, FC_SRAM_1_32KB);
+		break;
+	case FLEXCOP_III:
+		flexcop_sram_set_chip(fc, FC_SRAM_1_48KB);
+		break;
+	default:
+		return -EINVAL;
 	}
 	return 0;
 }
 
-int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target)
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest,
+		 flexcop_sram_dest_target_t target)
 {
 	flexcop_ibi_value v;
-
-	v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+	v = fc->read_ibi_reg(fc, sram_dest_reg_714);
 
 	if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) {
 		err("SRAM destination target to available on FlexCopII(b)\n");
 		return -EINVAL;
 	}
-
-	deb_sram("sram dest: %x target: %x\n",dest, target);
+	deb_sram("sram dest: %x target: %x\n", dest, target);
 
 	if (dest & FC_SRAM_DEST_NET)
 		v.sram_dest_reg_714.NET_Dest = target;
@@ -154,14 +152,12 @@ static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len
 		else
 			bank = 0x10000000;
 	}
-
 	flex_sram_write(adapter, bank, addr & 0x7fff, buf, len);
 }
 
 static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
 {
 	u32 bank;
-
 	bank = 0;
 
 	if (adapter->dw_sram_type == 0x20000) {
@@ -174,26 +170,22 @@ static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
 		else
 			bank = 0x10000000;
 	}
-
 	flex_sram_read(adapter, bank, addr & 0x7fff, buf, len);
 }
 
 static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
 {
 	u32 length;
-
 	while (len != 0) {
 		length = len;
-
-		// check if the address range belongs to the same
-		// 32K memory chip. If not, the data is read from
-		// one chip at a time.
+		/* check if the address range belongs to the same
+		 * 32K memory chip. If not, the data is read
+		 * from one chip at a time */
 		if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
 			length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
 		}
 
 		sram_read_chunk(adapter, addr, buf, length);
-
 		addr = addr + length;
 		buf = buf + length;
 		len = len - length;
@@ -203,19 +195,17 @@ static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
 static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
 {
 	u32 length;
-
 	while (len != 0) {
 		length = len;
 
-		// check if the address range belongs to the same
-		// 32K memory chip. If not, the data is written to
-		// one chip at a time.
+		/* check if the address range belongs to the same
+		 * 32K memory chip. If not, the data is
+		 * written to one chip at a time */
 		if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
 			length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
 		}
 
 		sram_write_chunk(adapter, addr, buf, length);
-
 		addr = addr + length;
 		buf = buf + length;
 		len = len - length;
@@ -224,39 +214,29 @@ static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
 
 static void sram_set_size(struct adapter *adapter, u32 mask)
 {
-	write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
+	write_reg_dw(adapter, 0x71c,
+			(mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
 }
 
 static void sram_init(struct adapter *adapter)
 {
 	u32 tmp;
-
 	tmp = read_reg_dw(adapter, 0x71c);
-
 	write_reg_dw(adapter, 0x71c, 1);
 
 	if (read_reg_dw(adapter, 0x71c) != 0) {
 		write_reg_dw(adapter, 0x71c, tmp);
-
 		adapter->dw_sram_type = tmp & 0x30000;
-
 		ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type);
-
 	} else {
-
 		adapter->dw_sram_type = 0x10000;
-
 		ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type);
 	}
-
-	/* return value is never used? */
-/*	return adapter->dw_sram_type; */
 }
 
 static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
 {
 	u8 tmp1, tmp2;
-
 	dprintk("%s: mask = %x, addr = %x\n", __func__, mask, addr);
 
 	sram_set_size(adapter, mask);
@@ -269,7 +249,6 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
 	sram_write(adapter, addr + 4, &tmp1, 1);
 
 	tmp2 = 0;
-
 	mdelay(20);
 
 	sram_read(adapter, addr, &tmp2, 1);
@@ -287,7 +266,6 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
 	sram_write(adapter, addr + 4, &tmp1, 1);
 
 	tmp2 = 0;
-
 	mdelay(20);
 
 	sram_read(adapter, addr, &tmp2, 1);
@@ -297,26 +275,24 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
 
 	if (tmp2 != 0x5a)
 		return 0;
-
 	return 1;
 }
 
 static u32 sram_length(struct adapter *adapter)
 {
 	if (adapter->dw_sram_type == 0x10000)
-		return 32768;	//  32K
+		return 32768; /* 32K */
 	if (adapter->dw_sram_type == 0x00000)
-		return 65536;	//  64K
+		return 65536; /* 64K */
 	if (adapter->dw_sram_type == 0x20000)
-		return 131072;	// 128K
-
-	return 32768;		// 32K
+		return 131072; /* 128K */
+	return 32768; /* 32K */
 }
 
 /* FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
-    - for 128K there are 4x32K chips at bank 0,1,2,3.
-    - for  64K there are 2x32K chips at bank 1,2.
-    - for  32K there is one 32K chip at bank 0.
+   - for 128K there are 4x32K chips at bank 0,1,2,3.
+   - for  64K there are 2x32K chips at bank 1,2.
+   - for  32K there is one 32K chip at bank 0.
 
    FlexCop works only with one bank at a time. The bank is selected
    by bits 28-29 of the 0x700 register.
@@ -324,24 +300,18 @@ static u32 sram_length(struct adapter *adapter)
    bank 0 covers addresses 0x00000-0x07fff
    bank 1 covers addresses 0x08000-0x0ffff
    bank 2 covers addresses 0x10000-0x17fff
-   bank 3 covers addresses 0x18000-0x1ffff
-*/
+   bank 3 covers addresses 0x18000-0x1ffff */
 
 static int flexcop_sram_detect(struct flexcop_device *fc)
 {
-	flexcop_ibi_value r208,r71c_0,vr71c_1;
-
+	flexcop_ibi_value r208, r71c_0, vr71c_1;
 	r208 = fc->read_ibi_reg(fc, ctrl_208);
 	fc->write_ibi_reg(fc, ctrl_208, ibi_zero);
 
 	r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c);
-
 	write_reg_dw(adapter, 0x71c, 1);
-
 	tmp3 = read_reg_dw(adapter, 0x71c);
-
 	dprintk("%s: tmp3 = %x\n", __func__, tmp3);
-
 	write_reg_dw(adapter, 0x71c, tmp2);
 
 	// check for internal SRAM ???
@@ -350,9 +320,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc)
 		sram_set_size(adapter, 0x10000);
 		sram_init(adapter);
 		write_reg_dw(adapter, 0x208, tmp);
-
 		dprintk("%s: sram size = 32K\n", __func__);
-
 		return 32;
 	}
 
@@ -360,9 +328,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc)
 		sram_set_size(adapter, 0x20000);
 		sram_init(adapter);
 		write_reg_dw(adapter, 0x208, tmp);
-
 		dprintk("%s: sram size = 128K\n", __func__);
-
 		return 128;
 	}
 
@@ -370,9 +336,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc)
 		sram_set_size(adapter, 0x00000);
 		sram_init(adapter);
 		write_reg_dw(adapter, 0x208, tmp);
-
 		dprintk("%s: sram size = 64K\n", __func__);
-
 		return 64;
 	}
 
@@ -380,18 +344,14 @@ static int flexcop_sram_detect(struct flexcop_device *fc)
 		sram_set_size(adapter, 0x10000);
 		sram_init(adapter);
 		write_reg_dw(adapter, 0x208, tmp);
-
 		dprintk("%s: sram size = 32K\n", __func__);
-
 		return 32;
 	}
 
 	sram_set_size(adapter, 0x10000);
 	sram_init(adapter);
 	write_reg_dw(adapter, 0x208, tmp);
-
 	dprintk("%s: SRAM detection failed. Set to 32K \n", __func__);
-
 	return 0;
 }
 
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.h b/drivers/media/dvb/b2c2/flexcop-usb.h
index 630e647a2caa..92529a9c4475 100644
--- a/drivers/media/dvb/b2c2/flexcop-usb.h
+++ b/drivers/media/dvb/b2c2/flexcop-usb.h
@@ -1,15 +1,20 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-usb.h - header file for the USB part
+ * see flexcop.c for copyright information
+ */
 #ifndef __FLEXCOP_USB_H_INCLUDED__
 #define __FLEXCOP_USB_H_INCLUDED__
 
 #include <linux/usb.h>
 
 /* transfer parameters */
-#define B2C2_USB_FRAMES_PER_ISO		4
-#define B2C2_USB_NUM_ISO_URB		4
+#define B2C2_USB_FRAMES_PER_ISO 4
+#define B2C2_USB_NUM_ISO_URB 4
 
-#define B2C2_USB_CTRL_PIPE_IN		usb_rcvctrlpipe(fc_usb->udev,0)
-#define B2C2_USB_CTRL_PIPE_OUT		usb_sndctrlpipe(fc_usb->udev,0)
-#define B2C2_USB_DATA_PIPE			usb_rcvisocpipe(fc_usb->udev,0x81)
+#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev, 0)
+#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev, 0)
+#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev, 0x81)
 
 struct flexcop_usb {
 	struct usb_device *udev;
@@ -18,8 +23,8 @@ struct flexcop_usb {
 	u8 *iso_buffer;
 	int buffer_size;
 	dma_addr_t dma_addr;
-	struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
 
+	struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
 	struct flexcop_device *fc_dev;
 
 	u8 tmp_buffer[1023+190];
@@ -30,14 +35,6 @@ struct flexcop_usb {
 /* request types TODO What is its use?*/
 typedef enum {
 
-/* something is wrong with this part
-	RTYPE_READ_DW         = (1 << 6),
-	RTYPE_WRITE_DW_1      = (3 << 6),
-	RTYPE_READ_V8_MEMORY  = (6 << 6),
-	RTYPE_WRITE_V8_MEMORY = (7 << 6),
-	RTYPE_WRITE_V8_FLASH  = (8 << 6),
-	RTYPE_GENERIC         = (9 << 6),
-*/
 } flexcop_usb_request_type_t;
 #endif
 
@@ -47,7 +44,6 @@ typedef enum {
 	B2C2_USB_READ_V8_MEM  = 0x05,
 	B2C2_USB_READ_REG     = 0x08,
 	B2C2_USB_WRITE_REG    = 0x0A,
-/*	B2C2_USB_WRITEREGLO   = 0x0A, */
 	B2C2_USB_WRITEREGHI   = 0x0B,
 	B2C2_USB_FLASH_BLOCK  = 0x10,
 	B2C2_USB_I2C_REQUEST  = 0x11,
@@ -62,15 +58,13 @@ typedef enum {
 	USB_FUNC_I2C_REPEATWRITE = 0x04,
 	USB_FUNC_GET_DESCRIPTOR  = 0x05,
 	USB_FUNC_I2C_REPEATREAD  = 0x06,
-/* DKT 020208 - add this to support special case of DiSEqC */
+	/* DKT 020208 - add this to support special case of DiSEqC */
 	USB_FUNC_I2C_CHECKWRITE  = 0x07,
 	USB_FUNC_I2C_CHECKRESULT = 0x08,
 } flexcop_usb_i2c_function_t;
 
-/*
- * function definition for UTILITY request 0x12
- * DKT 020304 - new utility function
- */
+/* function definition for UTILITY request 0x12
+ * DKT 020304 - new utility function */
 typedef enum {
 	UTILITY_SET_FILTER          = 0x01,
 	UTILITY_DATA_ENABLE         = 0x02,
@@ -84,7 +78,7 @@ typedef enum {
 	UTILITY_DATA_RESET          = 0x0A,
 	UTILITY_GET_DATA_STATUS     = 0x10,
 	UTILITY_GET_V8_REG          = 0x11,
-/* DKT 020326 - add function for v1.14 */
+	/* DKT 020326 - add function for v1.14 */
 	UTILITY_SRAM_WRITE          = 0x12,
 	UTILITY_SRAM_READ           = 0x13,
 	UTILITY_SRAM_TESTFILL       = 0x14,
@@ -92,13 +86,13 @@ typedef enum {
 	UTILITY_SRAM_TESTVERIFY     = 0x16,
 } flexcop_usb_utility_function_t;
 
-#define B2C2_WAIT_FOR_OPERATION_RW  1*HZ       /* 1 s */
-#define B2C2_WAIT_FOR_OPERATION_RDW 3*HZ       /* 3 s */
-#define B2C2_WAIT_FOR_OPERATION_WDW 1*HZ       /* 1 s */
+#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
+#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
 
-#define B2C2_WAIT_FOR_OPERATION_V8READ   3*HZ  /* 3 s */
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE  3*HZ  /* 3 s */
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH  3*HZ  /* 3 s */
+#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
 
 typedef enum {
 	V8_MEMORY_PAGE_DVB_CI = 0x20,
@@ -107,13 +101,11 @@ typedef enum {
 	V8_MEMORY_PAGE_FLASH  = 0x80
 } flexcop_usb_mem_page_t;
 
-#define V8_MEMORY_EXTENDED      (1 << 15)
-
-#define USB_MEM_READ_MAX                32
-#define USB_MEM_WRITE_MAX               1
-#define USB_FLASH_MAX                   8
-
-#define V8_MEMORY_PAGE_SIZE     0x8000      // 32K
-#define V8_MEMORY_PAGE_MASK     0x7FFF
+#define V8_MEMORY_EXTENDED (1 << 15)
+#define USB_MEM_READ_MAX   32
+#define USB_MEM_WRITE_MAX   1
+#define USB_FLASH_MAX       8
+#define V8_MEMORY_PAGE_SIZE 0x8000 /* 32K */
+#define V8_MEMORY_PAGE_MASK 0x7FFF
 
 #endif
diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c
index e836caecebbd..2df1b0214dcd 100644
--- a/drivers/media/dvb/b2c2/flexcop.c
+++ b/drivers/media/dvb/b2c2/flexcop.c
@@ -1,22 +1,20 @@
 /*
- * flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de>
- *
- * based on the skystar2-driver
- * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop.c - main module part
+ * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de>
+ * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
  *
  * Acknowledgements:
- *     John Jurrius from BBTI, Inc. for extensive support with
- *         code examples and data books
- *
- *     Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
+ *   John Jurrius from BBTI, Inc. for extensive support
+ *                    with code examples and data books
+ *   Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
  *
  * Contributions to the skystar2-driver have been done by
- *     Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
- *     Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
- *     Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering)
- *
+ *   Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
+ *   Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
+ *   Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu)
+ *   Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac
+ *               filtering)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Lesser General Public License
@@ -46,7 +44,10 @@
 
 int b2c2_flexcop_debug;
 module_param_named(debug, b2c2_flexcop_debug,  int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug,
+		"set debug level (1=info,2=tuner,4=i2c,8=ts,"
+		"16=sram,32=reg (|-able))."
+		DEBSTATUS);
 #undef DEBSTATUS
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -57,37 +58,36 @@ flexcop_ibi_value ibi_zero;
 static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
 {
 	struct flexcop_device *fc = dvbdmxfeed->demux->priv;
-	return flexcop_pid_feed_control(fc,dvbdmxfeed,1);
+	return flexcop_pid_feed_control(fc, dvbdmxfeed, 1);
 }
 
 static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
 {
 	struct flexcop_device *fc = dvbdmxfeed->demux->priv;
-	return flexcop_pid_feed_control(fc,dvbdmxfeed,0);
+	return flexcop_pid_feed_control(fc, dvbdmxfeed, 0);
 }
 
 static int flexcop_dvb_init(struct flexcop_device *fc)
 {
 	int ret = dvb_register_adapter(&fc->dvb_adapter,
-				       "FlexCop Digital TV device", fc->owner,
-				       fc->dev, adapter_nr);
+			"FlexCop Digital TV device", fc->owner,
+			fc->dev, adapter_nr);
 	if (ret < 0) {
 		err("error registering DVB adapter");
 		return ret;
 	}
 	fc->dvb_adapter.priv = fc;
 
-	fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
+	fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING
+			| DMX_MEMORY_BASED_FILTERING);
 	fc->demux.priv = fc;
-
 	fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
-
 	fc->demux.start_feed = flexcop_dvb_start_feed;
 	fc->demux.stop_feed = flexcop_dvb_stop_feed;
 	fc->demux.write_to_decoder = NULL;
 
 	if ((ret = dvb_dmx_init(&fc->demux)) < 0) {
-		err("dvb_dmx failed: error %d",ret);
+		err("dvb_dmx failed: error %d", ret);
 		goto err_dmx;
 	}
 
@@ -97,23 +97,23 @@ static int flexcop_dvb_init(struct flexcop_device *fc)
 	fc->dmxdev.demux = &fc->demux.dmx;
 	fc->dmxdev.capabilities = 0;
 	if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) {
-		err("dvb_dmxdev_init failed: error %d",ret);
+		err("dvb_dmxdev_init failed: error %d", ret);
 		goto err_dmx_dev;
 	}
 
 	if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
-		err("adding hw_frontend to dmx failed: error %d",ret);
+		err("adding hw_frontend to dmx failed: error %d", ret);
 		goto err_dmx_add_hw_frontend;
 	}
 
 	fc->mem_frontend.source = DMX_MEMORY_FE;
 	if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) {
-		err("adding mem_frontend to dmx failed: error %d",ret);
+		err("adding mem_frontend to dmx failed: error %d", ret);
 		goto err_dmx_add_mem_frontend;
 	}
 
 	if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
-		err("connect frontend failed: error %d",ret);
+		err("connect frontend failed: error %d", ret);
 		goto err_connect_frontend;
 	}
 
@@ -123,9 +123,9 @@ static int flexcop_dvb_init(struct flexcop_device *fc)
 	return 0;
 
 err_connect_frontend:
-	fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
+	fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend);
 err_dmx_add_mem_frontend:
-	fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
+	fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend);
 err_dmx_add_hw_frontend:
 	dvb_dmxdev_release(&fc->dmxdev);
 err_dmx_dev:
@@ -141,12 +141,13 @@ static void flexcop_dvb_exit(struct flexcop_device *fc)
 		dvb_net_release(&fc->dvbnet);
 
 		fc->demux.dmx.close(&fc->demux.dmx);
-		fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
-		fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
+		fc->demux.dmx.remove_frontend(&fc->demux.dmx,
+			&fc->mem_frontend);
+		fc->demux.dmx.remove_frontend(&fc->demux.dmx,
+			&fc->hw_frontend);
 		dvb_dmxdev_release(&fc->dmxdev);
 		dvb_dmx_release(&fc->demux);
 		dvb_unregister_adapter(&fc->dvb_adapter);
-
 		deb_info("deinitialized dvb stuff\n");
 	}
 	fc->init_state &= ~FC_STATE_DVB_INIT;
@@ -168,9 +169,9 @@ EXPORT_SYMBOL(flexcop_pass_dmx_packets);
 
 static void flexcop_reset(struct flexcop_device *fc)
 {
-	flexcop_ibi_value v210,v204;
+	flexcop_ibi_value v210, v204;
 
-/* reset the flexcop itself */
+	/* reset the flexcop itself */
 	fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
 
 	v210.raw = 0;
@@ -183,13 +184,11 @@ static void flexcop_reset(struct flexcop_device *fc)
 	v210.sw_reset_210.reset_block_600 = 1;
 	v210.sw_reset_210.reset_block_700 = 1;
 	v210.sw_reset_210.Block_reset_enable = 0xb2;
-
 	v210.sw_reset_210.Special_controls = 0xc259;
-
 	fc->write_ibi_reg(fc,sw_reset_210,v210);
 	msleep(1);
 
-/* reset the periphical devices */
+	/* reset the periphical devices */
 
 	v204 = fc->read_ibi_reg(fc,misc_204);
 	v204.misc_204.Per_reset_sig = 0;
@@ -201,11 +200,10 @@ static void flexcop_reset(struct flexcop_device *fc)
 
 void flexcop_reset_block_300(struct flexcop_device *fc)
 {
-	flexcop_ibi_value v208_save = fc->read_ibi_reg(fc,ctrl_208),
-					  v210 = fc->read_ibi_reg(fc,sw_reset_210);
-
-	deb_rdump("208: %08x, 210: %08x\n",v208_save.raw,v210.raw);
+	flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208),
+			  v210 = fc->read_ibi_reg(fc, sw_reset_210);
 
+	deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw);
 	fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
 
 	v210.sw_reset_210.reset_block_300 = 1;
@@ -218,7 +216,8 @@ void flexcop_reset_block_300(struct flexcop_device *fc)
 struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
 {
 	void *bus;
-	struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), GFP_KERNEL);
+	struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device),
+				GFP_KERNEL);
 	if (!fc) {
 		err("no memory");
 		return NULL;
@@ -253,7 +252,6 @@ int flexcop_device_initialize(struct flexcop_device *fc)
 	flexcop_determine_revision(fc);
 	flexcop_sram_init(fc);
 	flexcop_hw_filter_init(fc);
-
 	flexcop_smc_ctrl(fc, 0);
 
 	if ((ret = flexcop_dvb_init(fc)))
@@ -278,7 +276,6 @@ int flexcop_device_initialize(struct flexcop_device *fc)
 		goto error;
 
 	flexcop_device_name(fc,"initialization of","complete");
-
 	return 0;
 
 error:
diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/dvb/b2c2/flexcop.h
index 0cebe1d92e0b..897b10c85ad9 100644
--- a/drivers/media/dvb/b2c2/flexcop.h
+++ b/drivers/media/dvb/b2c2/flexcop.h
@@ -1,9 +1,7 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop.h - private header file for all flexcop-chip-source files.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop.h - private header file for all flexcop-chip-source files
+ * see flexcop.c for copyright information
  */
 #ifndef __FLEXCOP_H__
 #define __FLEXCOP_H___
@@ -21,11 +19,11 @@ extern int b2c2_flexcop_debug;
 #define dprintk(level,args...)
 #endif
 
-#define deb_info(args...)  dprintk(0x01,args)
-#define deb_tuner(args...) dprintk(0x02,args)
-#define deb_i2c(args...)   dprintk(0x04,args)
-#define deb_ts(args...)    dprintk(0x08,args)
-#define deb_sram(args...)  dprintk(0x10,args)
-#define deb_rdump(args...)  dprintk(0x20,args)
+#define deb_info(args...) dprintk(0x01, args)
+#define deb_tuner(args...) dprintk(0x02, args)
+#define deb_i2c(args...) dprintk(0x04, args)
+#define deb_ts(args...) dprintk(0x08, args)
+#define deb_sram(args...) dprintk(0x10, args)
+#define deb_rdump(args...) dprintk(0x20, args)
 
 #endif
diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h
index ed9a6756b194..8f64bdbd72bb 100644
--- a/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h
+++ b/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h
@@ -1,10 +1,7 @@
-/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
+/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * register descriptions
- *
- * see flexcop.c for copyright information.
+ * see flexcop.c for copyright information
  */
-
 /* This file is automatically generated, do not edit things here. */
 #ifndef __FLEXCOP_IBI_VALUE_INCLUDED__
 #define __FLEXCOP_IBI_VALUE_INCLUDED__
diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h
index 49f2315b6e58..c75830d7d942 100644
--- a/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h
+++ b/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h
@@ -1,10 +1,7 @@
-/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
+/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
  * register descriptions
- *
- * see flexcop.c for copyright information.
+ * see flexcop.c for copyright information
  */
-
 /* This file is automatically generated, do not edit things here. */
 #ifndef __FLEXCOP_IBI_VALUE_INCLUDED__
 #define __FLEXCOP_IBI_VALUE_INCLUDED__