Remove GENERIC_HARDIRQ config option

After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

32 files changed, 90 insertions, 131 deletions

diff --git a/drivers/block/mtip32xx/Kconfig b/drivers/block/mtip32xx/Kconfig
index 1fca1f996b45..0ba837fc62a8 100644
--- a/drivers/block/mtip32xx/Kconfig
+++ b/drivers/block/mtip32xx/Kconfig
@@ -4,6 +4,6 @@
 
 config BLK_DEV_PCIESSD_MTIP32XX
 	tristate "Block Device Driver for Micron PCIe SSDs"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
           This enables the block driver for Micron PCIe SSDs.
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 0d91fe52f3f5..7737b5bd26af 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -255,10 +255,7 @@
 #include <linux/fips.h>
 #include <linux/ptrace.h>
 #include <linux/kmemcheck.h>
-
-#ifdef CONFIG_GENERIC_HARDIRQS
-# include <linux/irq.h>
-#endif
+#include <linux/irq.h>
 
 #include <asm/processor.h>
 #include <asm/uaccess.h>
diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig
index dde13248b681..dcfe964cc8dc 100644
--- a/drivers/dma/dw/Kconfig
+++ b/drivers/dma/dw/Kconfig
@@ -4,7 +4,6 @@
 
 config DW_DMAC_CORE
 	tristate "Synopsys DesignWare AHB DMA support"
-	depends on GENERIC_HARDIRQS
 	select DMA_ENGINE
 
 config DW_DMAC
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 5cb218151c9c..b6ed304863eb 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -322,7 +322,7 @@ config GPIO_ICH
 
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	select MFD_VX855
 	help
@@ -396,7 +396,7 @@ config GPIO_MAX732X
 
 config GPIO_MAX732X_IRQ
 	bool "Interrupt controller support for MAX732x"
-	depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
+	depends on GPIO_MAX732X=y
 	help
 	  Say yes here to enable the max732x to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
@@ -661,7 +661,7 @@ config GPIO_TIMBERDALE
 
 config GPIO_RDC321X
 	tristate "RDC R-321x GPIO support"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	select MFD_RDC321X
 	help
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 3d7c9f67b6d7..71b70e3a7a71 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -773,7 +773,7 @@ config HID_ZYDACRON
 
 config HID_SENSOR_HUB
 	tristate "HID Sensors framework support"
-	depends on HID && GENERIC_HARDIRQS
+	depends on HID
 	select MFD_CORE
 	default n
 	---help---
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index e380c6eef3af..7b7ea320a258 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -75,7 +75,6 @@ config I2C_HELPER_AUTO
 
 config I2C_SMBUS
 	tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
-	depends on GENERIC_HARDIRQS
 	help
 	  Say Y here if you want support for SMBus extensions to the I2C
 	  specification. At the moment, the only supported extension is
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index fcdd321f709e..cdcbd8368ed3 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -115,7 +115,7 @@ config I2C_I801
 
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -546,7 +546,6 @@ config I2C_NUC900
 
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
-	depends on GENERIC_HARDIRQS
 	help
 	  If you say yes to this option, support will be included for the
 	  OpenCores I2C controller. For details see
@@ -791,7 +790,7 @@ config I2C_DIOLAN_U2C
 
 config I2C_PARPORT
 	tristate "Parallel port adapter"
-	depends on PARPORT && GENERIC_HARDIRQS
+	depends on PARPORT
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help
@@ -816,7 +815,6 @@ config I2C_PARPORT
 
 config I2C_PARPORT_LIGHT
 	tristate "Parallel port adapter (light)"
-	depends on GENERIC_HARDIRQS
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index cbea3271c1b1..90cf0cda50c4 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig IIO
 	tristate "Industrial I/O support"
-	depends on GENERIC_HARDIRQS
 	help
 	  The industrial I/O subsystem provides a unified framework for
 	  drivers for many different types of embedded sensors using a
diff --git a/drivers/infiniband/hw/qib/Kconfig b/drivers/infiniband/hw/qib/Kconfig
index d03ca4c1ff25..495be09781b1 100644
--- a/drivers/infiniband/hw/qib/Kconfig
+++ b/drivers/infiniband/hw/qib/Kconfig
@@ -8,7 +8,7 @@ config INFINIBAND_QIB
 
 config INFINIBAND_QIB_DCA
 	bool "QIB DCA support"
-	depends on INFINIBAND_QIB && DCA && SMP && GENERIC_HARDIRQS && !(INFINIBAND_QIB=y && DCA=m)
+	depends on INFINIBAND_QIB && DCA && SMP && !(INFINIBAND_QIB=y && DCA=m)
 	default y
 	---help---
 	Setting this enables DCA support on some Intel chip sets
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 269d4c3658cb..c1edd39bc5ba 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -224,7 +224,7 @@ config KEYBOARD_TCA6416
 
 config KEYBOARD_TCA8418
 	tristate "TCA8418 Keypad Support"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select INPUT_MATRIXKMAP
 	help
 	  This driver implements basic keypad functionality
@@ -303,7 +303,7 @@ config KEYBOARD_HP7XX
 
 config KEYBOARD_LM8323
 	tristate "LM8323 keypad chip"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	depends on LEDS_CLASS
 	help
 	  If you say yes here you get support for the National Semiconductor
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 1e691a3a79cb..33b3e88fe4a2 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -239,7 +239,6 @@ config SERIO_PS2MULT
 
 config SERIO_ARC_PS2
 	tristate "ARC PS/2 support"
-	depends on GENERIC_HARDIRQS
 	help
 	  Say Y here if you have an ARC FPGA platform with a PS/2
 	  controller in it.
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 3b9758b5f4d7..e09ec67957a3 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -389,7 +389,7 @@ config TOUCHSCREEN_MCS5000
 
 config TOUCHSCREEN_MMS114
 	tristate "MELFAS MMS114 touchscreen"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	help
 	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 	  chip in your system.
@@ -845,7 +845,7 @@ config TOUCHSCREEN_TSC_SERIO
 
 config TOUCHSCREEN_TSC2005
         tristate "TSC2005 based touchscreens"
-        depends on SPI_MASTER && GENERIC_HARDIRQS
+        depends on SPI_MASTER
         help
           Say Y here if you have a TSC2005 based touchscreen.
 
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 8068d7b64155..c7caf94621b4 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -203,7 +203,7 @@ config VIDEO_SAMSUNG_EXYNOS_GSC
 
 config VIDEO_SH_VEU
 	tristate "SuperH VEU mem2mem video processing driver"
-	depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS && HAS_DMA
+	depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_MEM2MEM_DEV
 	help
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 39882ddd2594..6ecdc39bb366 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -214,7 +214,7 @@ config RADIO_TIMBERDALE
 
 config RADIO_WL1273
 	tristate "Texas Instruments WL1273 I2C FM Radio"
-	depends on I2C && VIDEO_V4L2 && GENERIC_HARDIRQS
+	depends on I2C && VIDEO_V4L2
 	select MFD_CORE
 	select MFD_WL1273_CORE
 	select FW_LOADER
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e0e46f50f95d..914c3d142f78 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -23,7 +23,7 @@ config MFD_AS3711
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Support for the AS3711 PMIC from AMS
 
@@ -40,7 +40,7 @@ config PMIC_ADP5520
 config MFD_AAT2870_CORE
 	bool "AnalogicTech AAT2870"
 	select MFD_CORE
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+	depends on I2C=y && GPIOLIB
 	help
 	  If you say yes here you get support for the AAT2870.
 	  This driver provides common support for accessing the device,
@@ -78,7 +78,7 @@ config MFD_CROS_EC_SPI
 
 config MFD_ASIC3
 	bool "Compaq ASIC3"
-	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+	depends on GPIOLIB && ARM
 	select MFD_CORE
 	 ---help---
 	  This driver supports the ASIC3 multifunction chip found on many
@@ -104,7 +104,7 @@ config MFD_DA9052_SPI
 	select REGMAP_SPI
 	select REGMAP_IRQ
 	select PMIC_DA9052
-	depends on SPI_MASTER=y && GENERIC_HARDIRQS
+	depends on SPI_MASTER=y
 	help
 	  Support for the Dialog Semiconductor DA9052 PMIC
 	  when controlled using SPI. This driver provides common support
@@ -116,7 +116,7 @@ config MFD_DA9052_I2C
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select PMIC_DA9052
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Support for the Dialog Semiconductor DA9052 PMIC
 	  when controlled using I2C. This driver provides common support
@@ -128,7 +128,7 @@ config MFD_DA9055
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Say yes here for support of Dialog Semiconductor DA9055. This is
 	  a Power Management IC. This driver provides common support for
@@ -144,7 +144,7 @@ config MFD_DA9063
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
 	  This includes the I2C driver and core APIs.
@@ -156,7 +156,7 @@ config MFD_MC13783
 
 config MFD_MC13XXX
 	tristate
-	depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
+	depends on (SPI_MASTER || I2C)
 	select MFD_CORE
 	select MFD_MC13783
 	help
@@ -167,7 +167,7 @@ config MFD_MC13XXX
 
 config MFD_MC13XXX_SPI
 	tristate "Freescale MC13783 and MC13892 SPI interface"
-	depends on SPI_MASTER && GENERIC_HARDIRQS
+	depends on SPI_MASTER
 	select REGMAP_SPI
 	select MFD_MC13XXX
 	help
@@ -175,7 +175,7 @@ config MFD_MC13XXX_SPI
 
 config MFD_MC13XXX_I2C
 	tristate "Freescale MC13892 I2C interface"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select REGMAP_I2C
 	select MFD_MC13XXX
 	help
@@ -183,7 +183,7 @@ config MFD_MC13XXX_I2C
 
 config HTC_EGPIO
 	bool "HTC EGPIO support"
-	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+	depends on GPIOLIB && ARM
 	help
 	    This driver supports the CPLD egpio chip present on
 	    several HTC phones.  It provides basic support for input
@@ -192,7 +192,6 @@ config HTC_EGPIO
 config HTC_PASIC3
 	tristate "HTC PASIC3 LED/DS1WM chip support"
 	select MFD_CORE
-	depends on GENERIC_HARDIRQS
 	help
 	  This core driver provides register access for the LED/DS1WM
 	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
@@ -210,7 +209,7 @@ config HTC_I2CPLD
 
 config LPC_ICH
 	tristate "Intel ICH LPC"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	help
 	  The LPC bridge function of the Intel ICH provides support for
@@ -220,7 +219,7 @@ config LPC_ICH
 
 config LPC_SCH
 	tristate "Intel SCH LPC"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	help
 	  LPC bridge function of the Intel SCH provides support for
@@ -238,7 +237,7 @@ config MFD_INTEL_MSIC
 config MFD_JANZ_CMODIO
 	tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 	select MFD_CORE
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
 	  This is the core driver for the Janz CMOD-IO PCI MODULbus
 	  carrier board. This device is a PCI to MODULbus bridge which may
@@ -277,7 +276,7 @@ config MFD_KEMPLD
 
 config MFD_88PM800
 	tristate "Marvell 88PM800"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select MFD_CORE
@@ -289,7 +288,7 @@ config MFD_88PM800
 
 config MFD_88PM805
 	tristate "Marvell 88PM805"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select MFD_CORE
@@ -301,7 +300,7 @@ config MFD_88PM805
 
 config MFD_88PM860X
 	bool "Marvell 88PM8606/88PM8607"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	select MFD_CORE
 	help
@@ -312,7 +311,7 @@ config MFD_88PM860X
 
 config MFD_MAX77686
 	bool "Maxim Semiconductor MAX77686 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select IRQ_DOMAIN
@@ -325,7 +324,7 @@ config MFD_MAX77686
 
 config MFD_MAX77693
 	bool "Maxim Semiconductor MAX77693 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	help
@@ -339,7 +338,7 @@ config MFD_MAX77693
 config MFD_MAX8907
 	tristate "Maxim Semiconductor MAX8907 PMIC Support"
 	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
@@ -350,7 +349,7 @@ config MFD_MAX8907
 
 config MFD_MAX8925
 	bool "Maxim Semiconductor MAX8925 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	help
 	  Say yes here to support for Maxim Semiconductor MAX8925. This is
@@ -360,7 +359,7 @@ config MFD_MAX8925
 
 config MFD_MAX8997
 	bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select IRQ_DOMAIN
 	help
@@ -373,7 +372,7 @@ config MFD_MAX8997
 
 config MFD_MAX8998
 	bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select IRQ_DOMAIN
 	help
@@ -385,7 +384,7 @@ config MFD_MAX8998
 
 config EZX_PCAP
 	bool "Motorola EZXPCAP Support"
-	depends on GENERIC_HARDIRQS && SPI_MASTER
+	depends on SPI_MASTER
 	help
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
@@ -393,7 +392,7 @@ config EZX_PCAP
 config MFD_VIPERBOARD
         tristate "Nano River Technologies Viperboard"
 	select MFD_CORE
-	depends on USB && GENERIC_HARDIRQS
+	depends on USB
 	default n
 	help
 	  Say yes here if you want support for Nano River Technologies
@@ -407,7 +406,7 @@ config MFD_VIPERBOARD
 config MFD_RETU
 	tristate "Nokia Retu and Tahvo multi-function device"
 	select MFD_CORE
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select REGMAP_IRQ
 	help
 	  Retu and Tahvo are a multi-function devices found on Nokia
@@ -480,7 +479,7 @@ config MFD_PM8XXX_IRQ
 config MFD_RDC321X
 	tristate "RDC R-321x southbridge"
 	select MFD_CORE
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
 	  Say yes here if you want to have support for the RDC R-321x SoC
 	  southbridge which provides access to GPIOs and Watchdog using the
@@ -488,7 +487,7 @@ config MFD_RDC321X
 
 config MFD_RTSX_PCI
 	tristate "Realtek PCI-E card reader"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	help
 	  This supports for Realtek PCI-Express card reader including rts5209,
@@ -498,7 +497,7 @@ config MFD_RTSX_PCI
 
 config MFD_RC5T583
 	bool "Ricoh RC5T583 Power Management system device"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	help
@@ -512,7 +511,7 @@ config MFD_RC5T583
 
 config MFD_SEC_CORE
 	bool "SAMSUNG Electronics PMIC Series Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -555,7 +554,7 @@ config MFD_SM501_GPIO
 
 config MFD_SMSC
        bool "SMSC ECE1099 series chips"
-       depends on I2C=y && GENERIC_HARDIRQS
+       depends on I2C=y
        select MFD_CORE
        select REGMAP_I2C
        help
@@ -577,7 +576,7 @@ config ABX500_CORE
 
 config AB3100_CORE
 	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
-	depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
+	depends on I2C=y && ABX500_CORE
 	select MFD_CORE
 	default y if ARCH_U300
 	help
@@ -601,7 +600,7 @@ config AB3100_OTP
 
 config AB8500_CORE
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
-	depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+	depends on ABX500_CORE && MFD_DB8500_PRCMU
 	select POWER_SUPPLY
 	select MFD_CORE
 	select IRQ_DOMAIN
@@ -639,7 +638,7 @@ config MFD_DB8500_PRCMU
 
 config MFD_STMPE
 	bool "STMicroelectronics STMPE"
-	depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
+	depends on (I2C=y || SPI_MASTER=y)
 	select MFD_CORE
 	help
 	  Support for the STMPE family of I/O Expanders from
@@ -680,7 +679,7 @@ endmenu
 
 config MFD_STA2X11
 	bool "STMicroelectronics STA2X11"
-	depends on STA2X11 && GENERIC_HARDIRQS
+	depends on STA2X11
 	select MFD_CORE
 	select REGMAP_MMIO
 
@@ -700,7 +699,6 @@ config MFD_TI_AM335X_TSCADC
 	select MFD_CORE
 	select REGMAP
 	select REGMAP_MMIO
-	depends on GENERIC_HARDIRQS
 	help
 	  If you say yes here you get support for Texas Instruments series
 	  of Touch Screen /ADC chips.
@@ -717,7 +715,7 @@ config MFD_DM355EVM_MSP
 
 config MFD_LP8788
 	bool "TI LP8788 Power Management Unit Driver"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select IRQ_DOMAIN
@@ -739,14 +737,14 @@ config MFD_PALMAS
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  If you say yes here you get support for the Palmas
 	  series of PMIC chips from Texas Instruments.
 
 config MFD_TI_SSP
 	tristate "TI Sequencer Serial Port support"
-	depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+	depends on ARCH_DAVINCI_TNETV107X
 	select MFD_CORE
 	---help---
 	  Say Y here if you want support for the Sequencer Serial Port
@@ -761,7 +759,6 @@ config TPS6105X
 	select REGULATOR
 	select MFD_CORE
 	select REGULATOR_FIXED_VOLTAGE
-	depends on GENERIC_HARDIRQS
 	help
 	  This option enables a driver for the TP61050/TPS61052
 	  high-power "white LED driver". This boost converter is
@@ -784,7 +781,7 @@ config TPS65010
 config TPS6507X
 	tristate "TI TPS6507x Power Management / Touch Screen chips"
 	select MFD_CORE
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	help
 	  If you say yes here you get support for the TPS6507x series of
 	  Power Management / Touch Screen chips.  These include voltage
@@ -798,7 +795,7 @@ config TPS65911_COMPARATOR
 
 config MFD_TPS65090
 	bool "TI TPS65090 Power Management chips"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -811,7 +808,7 @@ config MFD_TPS65090
 
 config MFD_TPS65217
 	tristate "TI TPS65217 Power Management / White LED chips"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select MFD_CORE
 	select REGMAP_I2C
 	help
@@ -826,7 +823,7 @@ config MFD_TPS65217
 
 config MFD_TPS6586X
 	bool "TI TPS6586x Power Management chips"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	help
@@ -841,7 +838,7 @@ config MFD_TPS6586X
 
 config MFD_TPS65910
 	bool "TI TPS65910 Power Management chip"
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+	depends on I2C=y && GPIOLIB
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -862,7 +859,7 @@ config MFD_TPS65912_I2C
 	bool "TI TPS65912 Power Management chip with I2C"
 	select MFD_CORE
 	select MFD_TPS65912
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+	depends on I2C=y && GPIOLIB
 	help
 	  If you say yes here you get support for the TPS65912 series of
 	  PM chips with I2C interface.
@@ -871,14 +868,14 @@ config MFD_TPS65912_SPI
 	bool "TI TPS65912 Power Management chip with SPI"
 	select MFD_CORE
 	select MFD_TPS65912
-	depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
+	depends on SPI_MASTER && GPIOLIB
 	help
 	  If you say yes here you get support for the TPS65912 series of
 	  PM chips with SPI interface.
 
 config MFD_TPS80031
 	bool "TI TPS80031/TPS80032 Power Management chips"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -892,7 +889,7 @@ config MFD_TPS80031
 
 config TWL4030_CORE
 	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select IRQ_DOMAIN
 	select REGMAP_I2C
 	help
@@ -931,13 +928,13 @@ config TWL4030_POWER
 
 config MFD_TWL4030_AUDIO
 	bool "TI TWL4030 Audio"
-	depends on TWL4030_CORE && GENERIC_HARDIRQS
+	depends on TWL4030_CORE
 	select MFD_CORE
 	default n
 
 config TWL6040_CORE
 	bool "TI TWL6040 audio codec"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -961,7 +958,7 @@ config MENELAUS
 
 config MFD_WL1273_CORE
 	tristate "TI WL1273 FM radio"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select MFD_CORE
 	default n
 	help
@@ -974,7 +971,6 @@ config MFD_LM3533
 	depends on I2C
 	select MFD_CORE
 	select REGMAP_I2C
-	depends on GENERIC_HARDIRQS
 	help
 	  Say yes here to enable support for National Semiconductor / TI
 	  LM3533 Lighting Power chips.
@@ -996,7 +992,7 @@ config MFD_TIMBERDALE
 
 config MFD_TC3589X
 	bool "Toshiba TC35892 and variants"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	help
 	  Support for the Toshiba TC35892 and variants I/O Expander.
@@ -1011,7 +1007,7 @@ config MFD_TMIO
 
 config MFD_T7L66XB
 	bool "Toshiba T7L66XB"
-	depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
+	depends on ARM && HAVE_CLK
 	select MFD_CORE
 	select MFD_TMIO
 	help
@@ -1036,7 +1032,7 @@ config MFD_TC6393XB
 
 config MFD_VX855
 	tristate "VIA VX855/VX875 integrated south bridge"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	help
 	  Say yes here to enable support for various functions of the
@@ -1054,7 +1050,7 @@ config MFD_ARIZONA_I2C
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_I2C
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	help
 	  Support for the Wolfson Microelectronics Arizona platform audio SoC
 	  core functionality controlled via I2C.
@@ -1064,7 +1060,7 @@ config MFD_ARIZONA_SPI
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_SPI
-	depends on SPI_MASTER && GENERIC_HARDIRQS
+	depends on SPI_MASTER
 	help
 	  Support for the Wolfson Microelectronics Arizona platform audio SoC
 	  core functionality controlled via I2C.
@@ -1090,7 +1086,7 @@ config MFD_WM8997
 config MFD_WM8400
 	bool "Wolfson Microelectronics WM8400"
 	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -1100,7 +1096,6 @@ config MFD_WM8400
 
 config MFD_WM831X
 	bool
-	depends on GENERIC_HARDIRQS
 
 config MFD_WM831X_I2C
 	bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
@@ -1108,7 +1103,7 @@ config MFD_WM831X_I2C
 	select MFD_WM831X
 	select REGMAP_I2C
 	select IRQ_DOMAIN
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 	  when controlled using I2C.  This driver provides common support
@@ -1121,7 +1116,7 @@ config MFD_WM831X_SPI
 	select MFD_WM831X
 	select REGMAP_SPI
 	select IRQ_DOMAIN
-	depends on SPI_MASTER && GENERIC_HARDIRQS
+	depends on SPI_MASTER
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 	  when controlled using SPI.  This driver provides common support
@@ -1130,12 +1125,11 @@ config MFD_WM831X_SPI
 
 config MFD_WM8350
 	bool
-	depends on GENERIC_HARDIRQS
 
 config MFD_WM8350_I2C
 	bool "Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  The WM8350 is an integrated audio and power management
 	  subsystem with watchdog and RTC functionality for embedded
@@ -1148,7 +1142,7 @@ config MFD_WM8994
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  The WM8994 is a highly integrated hi-fi CODEC designed for
 	  smartphone applicatiosn.  As well as audio functionality it
diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig
index 5acb9c5b49c4..22429b8b1068 100644
--- a/drivers/misc/cb710/Kconfig
+++ b/drivers/misc/cb710/Kconfig
@@ -1,6 +1,6 @@
 config CB710_CORE
 	tristate "ENE CB710/720 Flash memory card reader support"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
 	  This option enables support for PCI ENE CB710/720 Flash memory card
 	  reader found in some laptops (ie. some versions of HP Compaq nx9500).
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b7fd5ab80a48..7fc5099e44b2 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -487,7 +487,7 @@ config MMC_SDHI
 
 config MMC_CB710
 	tristate "ENE CB710 MMC/SD Interface support"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select CB710_CORE
 	help
 	  This option enables support for MMC/SD part of ENE CB710/720 Flash
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 8030cc0396fd..751d5c7b312d 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -22,7 +22,7 @@ if NET_CADENCE
 
 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
-	depends on GENERIC_HARDIRQS && HAS_DMA
+	depends on HAS_DMA
 	select MACB
 	---help---
 	  If you wish to compile a kernel for the AT91RM9200 and enable
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index 15ea36b51a66..cdafb8c73e82 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -41,7 +41,7 @@ config P54_PCI
 
 config P54_SPI
 	tristate "Prism54 SPI (stlc45xx) support"
-	depends on P54_COMMON && SPI_MASTER && GENERIC_HARDIRQS
+	depends on P54_COMMON && SPI_MASTER
 	---help---
 	  This driver is for stlc4550 or stlc4560 based wireless chips
 	  such as Nokia's N800/N810 Portable Internet Tablet.
diff --git a/drivers/net/wireless/ti/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig
index 8fec4ed36ac2..477a206c098e 100644
--- a/drivers/net/wireless/ti/wl1251/Kconfig
+++ b/drivers/net/wireless/ti/wl1251/Kconfig
@@ -1,6 +1,6 @@
 menuconfig WL1251
 	tristate "TI wl1251 driver support"
-	depends on MAC80211 && GENERIC_HARDIRQS
+	depends on MAC80211
 	select FW_LOADER
 	select CRC7
 	---help---
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index 2b832825c3d4..7c099542b214 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -1,6 +1,6 @@
 config WLCORE
 	tristate "TI wlcore support"
-	depends on WL_TI && GENERIC_HARDIRQS && MAC80211
+	depends on WL_TI && MAC80211
 	select FW_LOADER
 	---help---
 	  This module contains the main code for TI WLAN chips.  It abstracts
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index b35f93c232cf..d5f90d6383bc 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -30,7 +30,6 @@ static int pci_msi_enable = 1;
 
 /* Arch hooks */
 
-#if defined(CONFIG_GENERIC_HARDIRQS)
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_chip *chip = dev->bus->msi;
@@ -67,21 +66,6 @@ int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type)
 
 	return chip->check_device(chip, dev, nvec, type);
 }
-#else
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	return -ENOSYS;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-}
-
-int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type)
-{
-	return 0;
-}
-#endif /* CONFIG_GENERIC_HARDIRQS */
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
@@ -245,8 +229,6 @@ static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 	desc->masked = __msix_mask_irq(desc, flag);
 }
 
-#ifdef CONFIG_GENERIC_HARDIRQS
-
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
 {
 	struct msi_desc *desc = irq_data_get_msi(data);
@@ -270,8 +252,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }
 
-#endif /* CONFIG_GENERIC_HARDIRQS */
-
 void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -382,10 +362,8 @@ static void free_msi_irqs(struct pci_dev *dev)
 			nvec = entry->nvec_used;
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
-#ifdef CONFIG_GENERIC_HARDIRQS
 		for (i = 0; i < nvec; i++)
 			BUG_ON(irq_has_action(entry->irq + i));
-#endif
 	}
 
 	arch_teardown_msi_irqs(dev);
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index bb49ab684f9a..e6f92b450913 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -269,7 +269,6 @@ config CHARGER_ISP1704
 
 config CHARGER_MAX8903
 	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
-	depends on GENERIC_HARDIRQS
 	help
 	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
 	  The driver supports controlling charger-enable and current-limit
@@ -370,7 +369,7 @@ config AB8500_BM
 
 config BATTERY_GOLDFISH
 	tristate "Goldfish battery driver"
-	depends on GENERIC_HARDIRQS && (GOLDFISH || COMPILE_TEST)
+	depends on GOLDFISH || COMPILE_TEST
 	help
 	  Say Y to enable support for the battery and AC power in the
 	  Goldfish emulator.
diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig
index 6efd9b60d8ff..0c9f2805d076 100644
--- a/drivers/pps/clients/Kconfig
+++ b/drivers/pps/clients/Kconfig
@@ -31,7 +31,7 @@ config PPS_CLIENT_PARPORT
 
 config PPS_CLIENT_GPIO
 	tristate "PPS client using GPIO"
-	depends on PPS && GENERIC_HARDIRQS
+	depends on PPS
 	help
 	  If you say yes here you get support for a PPS source using
 	  GPIO. To be useful you must also register a platform device
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 0170d4c4a8a3..b9c53cc40e1f 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -55,7 +55,6 @@ comment "SPI Master Controller Drivers"
 
 config SPI_ALTERA
 	tristate "Altera SPI Controller"
-	depends on GENERIC_HARDIRQS
 	select SPI_BITBANG
 	help
 	  This is the driver for the Altera SPI Controller.
@@ -358,7 +357,7 @@ config SPI_PXA2XX_DMA
 
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
-	depends on (ARCH_PXA || PCI || ACPI) && GENERIC_HARDIRQS
+	depends on (ARCH_PXA || PCI || ACPI)
 	select PXA_SSP if ARCH_PXA
 	help
 	  This enables using a PXA2xx or Sodaville SSP port as a SPI master
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 47c6e7b9e150..febd45cd5027 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -5,7 +5,7 @@
 if TTY
 
 menu "Serial drivers"
-	depends on HAS_IOMEM && GENERIC_HARDIRQS
+	depends on HAS_IOMEM
 
 source "drivers/tty/serial/8250/Kconfig"
 
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index f969ea266acb..b870872e020f 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,6 +1,6 @@
 config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
-	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
+	depends on (USB || USB_GADGET) && HAS_DMA
 	depends on EXTCON
 	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
 	help
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 30e2dd8a1f2c..48cddf3cd6b8 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -313,7 +313,7 @@ config USB_S3C_HSUDC
 
 config USB_MV_UDC
 	tristate "Marvell USB2.0 Device Controller"
-	depends on GENERIC_HARDIRQS && HAS_DMA
+	depends on HAS_DMA
 	help
 	  Marvell Socs (including PXA and MMP series) include a high speed
 	  USB2.0 OTG controller, which can be configured as high speed or
@@ -425,7 +425,7 @@ config USB_GOKU
 
 config USB_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
 	  This is a USB device driver for EG20T PCH.
 	  EG20T PCH is the platform controller hub that is used in Intel's
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5be0326aae38..b3f20d7f15de 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -278,7 +278,6 @@ endif # USB_EHCI_HCD
 
 config USB_OXU210HP_HCD
 	tristate "OXU210HP HCD support"
-	depends on GENERIC_HARDIRQS
 	---help---
 	  The OXU210HP is an USB host/OTG/device controller. Enable this
 	  option if your board has this chip. If unsure, say N.
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index c64ee09a7c0e..c258a97ef1b0 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -71,7 +71,6 @@ config USB_MUSB_DA8XX
 
 config USB_MUSB_TUSB6010
 	tristate "TUSB6010"
-	depends on GENERIC_HARDIRQS
 
 config USB_MUSB_OMAP2PLUS
 	tristate "OMAP2430 and onwards"
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig
index 019bf7e49ee6..1c4195abc108 100644
--- a/drivers/usb/renesas_usbhs/Kconfig
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -4,7 +4,7 @@
 
 config USB_RENESAS_USBHS
 	tristate 'Renesas USBHS controller'
-	depends on USB_GADGET && GENERIC_HARDIRQS
+	depends on USB_GADGET
 	default n
 	help
 	  Renesas USBHS is a discrete USB host and peripheral controller chip
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 2bd1257dcc1c..efc7f075fcbe 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -42,7 +42,7 @@ config W1_MASTER_MXC
 
 config W1_MASTER_DS1WM
 	tristate "Maxim DS1WM 1-wire busmaster"
-	depends on W1 && GENERIC_HARDIRQS
+	depends on W1
 	help
 	  Say Y here to enable the DS1WM 1-wire driver, such as that
 	  in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like